From: Simon Horman <horms+renesas@verge.net.au>
To: linux-renesas-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Magnus Damm <magnus.damm@gmail.com>,
Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH 15/48] ARM: dts: r8a7745: Add MMC interface support
Date: Fri, 29 Sep 2017 13:53:07 +0200 [thread overview]
Message-ID: <933b16efb7be16e98a6bcd04ed59c5e91371afef.1506683482.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1506683482.git.horms+renesas@verge.net.au>
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Add MMC interface support for r8a7745 SoC.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 2fa989f631a9..7fd2967b1f42 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -706,6 +706,22 @@
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
+
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7745",
+ "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 315>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 315>;
+ reg-io-width = <4>;
+ max-frequency = <97500000>;
+ status = "disabled";
+ };
};
/* External root clock */
--
2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 15/48] ARM: dts: r8a7745: Add MMC interface support
Date: Fri, 29 Sep 2017 13:53:07 +0200 [thread overview]
Message-ID: <933b16efb7be16e98a6bcd04ed59c5e91371afef.1506683482.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1506683482.git.horms+renesas@verge.net.au>
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Add MMC interface support for r8a7745 SoC.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 2fa989f631a9..7fd2967b1f42 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -706,6 +706,22 @@
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
+
+ mmcif0: mmc at ee200000 {
+ compatible = "renesas,mmcif-r8a7745",
+ "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 315>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 315>;
+ reg-io-width = <4>;
+ max-frequency = <97500000>;
+ status = "disabled";
+ };
};
/* External root clock */
--
2.1.4
next prev parent reply other threads:[~2017-09-29 11:54 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-29 11:53 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.15 Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:52 ` [PATCH 01/48] ARM: dts: r8a7790: Convert to new CPG/MSSR bindings Simon Horman
2017-09-29 11:52 ` Simon Horman
2017-09-29 11:52 ` [PATCH 02/48] ARM: dts: r8a7792: " Simon Horman
2017-09-29 11:52 ` Simon Horman
2017-09-29 11:52 ` [PATCH 03/48] ARM: dts: r8a7793: " Simon Horman
2017-09-29 11:52 ` Simon Horman
2017-09-29 11:52 ` [PATCH 04/48] ARM: dts: r8a7794: " Simon Horman
2017-09-29 11:52 ` Simon Horman
2017-09-29 11:52 ` [PATCH 05/48] ARM: dts: r8a7790: Stop grouping clocks under a "clocks" subnode Simon Horman
2017-09-29 11:52 ` Simon Horman
2017-09-29 11:52 ` [PATCH 06/48] ARM: dts: r8a7793: " Simon Horman
2017-09-29 11:52 ` Simon Horman
2017-09-29 11:52 ` [PATCH 07/48] ARM: dts: r8a7794: " Simon Horman
2017-09-29 11:52 ` Simon Horman
2017-09-29 11:53 ` [PATCH 08/48] ARM: dts: r8a7743: Add SDHI controllers Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 09/48] ARM: dts: iwg20m: Enable SDHI0 controller Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 10/48] ARM: dts: iwg20d-q7: Add SDHI1 support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 11/48] ARM: dts: r8a7745: Add GPIO support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 12/48] ARM: dts: iwg22m: Add iWave RZG1E SODIMM SOM Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 13/48] ARM: dts: iwg22d-sodimm: Add support for iWave G22D-SODIMM board Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 14/48] ARM: dts: r8a7745: Add I2C DT support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` Simon Horman [this message]
2017-09-29 11:53 ` [PATCH 15/48] ARM: dts: r8a7745: Add MMC interface support Simon Horman
2017-09-29 11:53 ` [PATCH 16/48] ARM: dts: iwg22m: Add eMMC support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 17/48] ARM: dts: iwg22m: Add RTC support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 18/48] ARM: dts: r8a7791: Convert to new CPG/MSSR bindings Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 19/48] ARM: dts: r8a7791: Stop grouping clocks under a "clocks" subnode Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 20/48] ARM: dts: gr-peach: Remove empty line Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 21/48] ARM: dts: gr-peach: Add SCIF2 pin group Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 22/48] ARM: dts: gr-peach: Add user led device nodes Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-30 10:36 ` Sergei Shtylyov
2017-09-30 10:36 ` Sergei Shtylyov
2017-10-01 17:36 ` jacopo mondi
2017-10-01 17:36 ` jacopo mondi
2017-10-02 7:15 ` Simon Horman
2017-10-02 7:15 ` Simon Horman
2017-09-29 11:53 ` [PATCH 23/48] ARM: dts: r8a7745: Add Ethernet AVB support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 24/48] ARM: dts: iwg20d-q7: Add chosen node Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 25/48] ARM: dts: iwg20d-q7: Add RTC support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 26/48] ARM: dts: iwg22d-sodimm: Add pinctl support for scif4 Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 27/48] ARM: dts: iwg22d-sodimm: Add Ethernet AVB support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 28/48] ARM: dts: r8a7743: Add internal PCI bridge nodes Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 29/48] ARM: dts: r8a7743: Add USB PHY DT support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 30/48] ARM: dts: r8a7743: Link PCI USB devices to USB PHY Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 31/48] ARM: dts: iwg20d-q7: Enable internal PCI Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 32/48] ARM: dts: iwg20d-q7: Enable USB PHY Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 33/48] ARM: dts: alt: use correct logic for SD WP pins Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 34/48] ARM: dts: r8a7743: Add IIC cores to dtsi Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 35/48] ARM: dts: r8a7790: Add reset control properties Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 36/48] ARM: dts: r8a7791: " Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 37/48] ARM: dts: r8a7792: " Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 38/48] ARM: dts: r8a7793: " Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 39/48] ARM: dts: r8a7794: " Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 40/48] ARM: dts: r8a7745: Add SDHI controllers Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 41/48] ARM: dts: iwg22m: Enable SDHI1 controller Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 42/48] ARM: dts: r8a7743: Add QSPI support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 43/48] ARM: dts: iwg20m: Add SPI NOR support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 44/48] ARM: dts: r8a7745: Add QSPI support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 45/48] ARM: dts: iwg22m: Add SPI NOR support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 46/48] ARM: dts: iwg22d: Enable SDHI0 controller Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 47/48] ARM: dts: r8a7745: Add MSIOF[012] support Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-09-29 11:53 ` [PATCH 48/48] ARM: dts: r8a7743: " Simon Horman
2017-09-29 11:53 ` Simon Horman
2017-10-19 21:43 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.15 Arnd Bergmann
2017-10-19 21:43 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=933b16efb7be16e98a6bcd04ed59c5e91371afef.1506683482.git.horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=fabrizio.castro@bp.renesas.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.