From: Ben Gardiner <bengardiner@nanometrics.ca> To: Kevin Hilman <khilman@deeprootsystems.com>, davinci-linux-open-source@linux.davincidsp.com, linux-input@vger.kernel.org, Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-kernel@vger.kernel.org, Chris Cordahi <christophercordahi@nanometrics.ca>, Paul Mundt <lethal@linux-sh.org>, Sekhar Nori <nsekhar@ti.com>, Gabor Juhos <juhosg@openwrt.org>, Kevin Hilman <khilman@deeprootsystems.com> Subject: [PATCH v6 5/5] da850-evm: KEYBOARD_GPIO_POLLED Kconfig conditional Date: Thu, 9 Dec 2010 16:51:07 -0500 [thread overview] Message-ID: <939e12134ad83efb7a8706d16afec7c12663079e.1291931041.git.bengardiner@nanometrics.ca> (raw) In-Reply-To: <cover.1291931041.git.bengardiner@nanometrics.ca> Use the mach-davinci/Kconfig to enable gpio-keys-polled as default when da850-evm machine is enabled. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: "Nori, Sekhar" <nsekhar@ti.com> CC: Gabor Juhos <juhosg@openwrt.org> --- Changes since v5: * no changes in this patch of the series Changes since v4: * integrated the use of Gabor Juhos' polled gpio buttons driver Changes since v3: * no changes in this patch of the series / this patch was introduced in v4 of the series --- arch/arm/mach-davinci/Kconfig | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 84066e8..b93c327 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -180,6 +180,9 @@ endchoice config GPIO_PCA953X default MACH_DAVINCI_DA850_EVM +config KEYBOARD_GPIO_POLLED + default MACH_DAVINCI_DA850_EVM + config MACH_TNETV107X bool "TI TNETV107X Reference Platform" default ARCH_DAVINCI_TNETV107X -- 1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: Ben Gardiner <bengardiner@nanometrics.ca> To: davinci-linux-open-source@linux.davincidsp.com, linux-input@vger.kernel.org, Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-kernel@vger.kernel.org, Chris Cordahi <christophercordahi@nanometrics.ca>, Paul Mundt <lethal@linux-sh.org>, Sekhar Nori <nsekhar@ti.com>, Gabor Juhos <juhosg@openwrt.org>, Kevin Hilman <khilman@deeprootsystems.com> Subject: [PATCH v6 5/5] da850-evm: KEYBOARD_GPIO_POLLED Kconfig conditional Date: Thu, 9 Dec 2010 16:51:07 -0500 [thread overview] Message-ID: <939e12134ad83efb7a8706d16afec7c12663079e.1291931041.git.bengardiner@nanometrics.ca> (raw) In-Reply-To: <cover.1291931041.git.bengardiner@nanometrics.ca> Use the mach-davinci/Kconfig to enable gpio-keys-polled as default when da850-evm machine is enabled. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: "Nori, Sekhar" <nsekhar@ti.com> CC: Gabor Juhos <juhosg@openwrt.org> --- Changes since v5: * no changes in this patch of the series Changes since v4: * integrated the use of Gabor Juhos' polled gpio buttons driver Changes since v3: * no changes in this patch of the series / this patch was introduced in v4 of the series --- arch/arm/mach-davinci/Kconfig | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 84066e8..b93c327 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -180,6 +180,9 @@ endchoice config GPIO_PCA953X default MACH_DAVINCI_DA850_EVM +config KEYBOARD_GPIO_POLLED + default MACH_DAVINCI_DA850_EVM + config MACH_TNETV107X bool "TI TNETV107X Reference Platform" default ARCH_DAVINCI_TNETV107X -- 1.7.0.4
next prev parent reply other threads:[~2010-12-09 21:51 UTC|newest] Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <cover.1289835508.git.bengardiner@nanometrics.ca> [not found] ` <8891d088e9a16122c780f737b1b1ec35f9517c36.1289835508.git.bengardiner@nanometrics.ca> 2010-11-16 9:36 ` [PATCH 1/4] input: gpio_keys: polling mode support Paul Mundt 2010-11-16 18:28 ` Ben Gardiner 2010-11-16 19:39 ` [PATCH v2 0/4] da850-evm: add gpio-{keys,leds} for UI and BB expanders Ben Gardiner 2010-11-16 19:39 ` [PATCH v2 0/4] da850-evm: add gpio-{keys, leds} " Ben Gardiner 2010-11-16 19:39 ` [PATCH v2 1/4] input: gpio_keys: polling mode support Ben Gardiner 2010-11-16 19:39 ` [PATCH v2 2/4] da850-evm: add UI Expander pushbuttons Ben Gardiner 2010-11-19 9:58 ` Nori, Sekhar 2010-11-19 9:58 ` Nori, Sekhar 2010-11-19 15:38 ` Ben Gardiner 2010-11-19 15:38 ` Ben Gardiner 2010-11-22 11:49 ` Nori, Sekhar 2010-11-22 11:49 ` Nori, Sekhar 2010-11-22 13:50 ` Ben Gardiner 2010-11-22 13:50 ` Ben Gardiner 2010-11-23 12:38 ` Nori, Sekhar 2010-11-23 12:38 ` Nori, Sekhar 2010-11-23 13:29 ` Ben Gardiner 2010-11-23 13:29 ` Ben Gardiner 2010-11-23 15:48 ` Kevin Hilman 2010-11-23 15:48 ` Kevin Hilman 2010-11-23 17:58 ` Ben Gardiner 2010-11-23 17:58 ` Ben Gardiner 2010-11-24 6:09 ` Paul Mundt 2010-11-24 6:09 ` Paul Mundt 2010-11-24 17:17 ` Ben Gardiner 2010-11-24 17:17 ` Ben Gardiner 2010-11-16 19:39 ` [PATCH v2 3/4] da850-evm: extract defines for SEL{A,B,C} pins in UI expander Ben Gardiner 2010-11-16 19:39 ` [PATCH v2 3/4] da850-evm: extract defines for SEL{A, B, C} " Ben Gardiner 2010-11-19 11:19 ` Nori, Sekhar 2010-11-19 11:19 ` Nori, Sekhar 2010-11-19 15:38 ` Ben Gardiner 2010-11-19 15:38 ` Ben Gardiner 2010-11-16 19:39 ` [PATCH v2 4/4] da850-evm: add baseboard UI expander buttons, switches and LEDs Ben Gardiner 2010-11-19 12:14 ` Nori, Sekhar 2010-11-19 12:14 ` Nori, Sekhar 2010-11-19 15:40 ` Ben Gardiner 2010-11-19 15:40 ` Ben Gardiner 2010-11-19 17:02 ` Dmitry Torokhov 2010-11-19 17:02 ` Dmitry Torokhov 2010-11-19 17:15 ` Ben Gardiner 2010-11-19 17:15 ` Ben Gardiner 2010-11-22 12:00 ` Nori, Sekhar 2010-11-22 12:00 ` Nori, Sekhar 2010-11-22 14:15 ` Ben Gardiner 2010-11-22 14:15 ` Ben Gardiner 2010-11-23 12:42 ` Nori, Sekhar 2010-11-23 12:42 ` Nori, Sekhar 2010-11-23 13:32 ` Ben Gardiner 2010-11-23 13:32 ` Ben Gardiner 2010-11-19 21:37 ` [PATCH v3 0/4] da850-evm: add gpio-{keys,leds} for UI and BB expanders Ben Gardiner 2010-11-19 21:37 ` [PATCH v3 1/4] input: gpio_keys: polling mode support Ben Gardiner 2010-11-19 21:37 ` [PATCH v3 2/4] da850-evm: add UI Expander pushbuttons Ben Gardiner 2010-11-19 21:37 ` [PATCH v3 3/4] da850-evm: extract defines for SEL{A,B,C} pins in UI expander Ben Gardiner 2010-11-19 21:41 ` [PATCH v3 3/4] da850-evm: extract defines for SEL{A, B, C} " Victor Rodriguez 2010-11-19 21:41 ` Victor Rodriguez 2010-11-19 22:25 ` Ben Gardiner 2010-11-19 22:25 ` Ben Gardiner 2010-11-19 21:37 ` [PATCH v3 4/4] da850-evm: add baseboard GPIO expander buttons, switches and LEDs Ben Gardiner 2010-11-23 19:40 ` [PATCH v4 0/5] da850-evm: add gpio-{keys,leds} for UI and BB expanders Ben Gardiner 2010-11-23 19:40 ` [PATCH v4 1/5] input: gpio_keys: polling mode support Ben Gardiner 2010-11-23 19:40 ` Ben Gardiner 2010-11-23 19:40 ` [PATCH v4 2/5] da850-evm: add UI Expander pushbuttons Ben Gardiner 2010-11-23 19:40 ` Ben Gardiner 2010-11-24 13:16 ` Nori, Sekhar 2010-11-24 13:16 ` Nori, Sekhar 2010-11-24 17:16 ` Ben Gardiner 2010-11-24 17:16 ` Ben Gardiner 2010-11-23 19:40 ` [PATCH v4 3/5] da850-evm: extract defines for SEL{A,B,C} pins in UI expander Ben Gardiner 2010-11-23 19:40 ` [PATCH v4 4/5] da850-evm: add baseboard GPIO expander buttons, switches and LEDs Ben Gardiner 2010-11-23 19:41 ` [PATCH v4 5/5] da850-evm: KEYBOARD_GPIO and INPUT_POLLDEV Kconfig conditionals Ben Gardiner 2010-11-23 19:41 ` Ben Gardiner 2010-11-24 21:59 ` [PATCH v5 0/5] da850-evm: add gpio-{keys,leds} for UI and BB expanders Ben Gardiner 2010-11-24 21:59 ` [PATCH v5 1/5] [WIP] input: add input driver for polled GPIO buttons Ben Gardiner 2010-11-24 21:59 ` Ben Gardiner 2010-11-24 21:59 ` [PATCH v5 2/5] da850-evm: add UI Expander pushbuttons Ben Gardiner 2010-11-24 21:59 ` Ben Gardiner 2010-11-24 21:59 ` [PATCH v5 3/5] da850-evm: extract defines for SEL{A,B,C} pins in UI expander Ben Gardiner 2010-11-24 21:59 ` [PATCH v5 4/5] da850-evm: add baseboard GPIO expander buttons, switches and LEDs Ben Gardiner 2010-11-24 21:59 ` [PATCH v5 5/5] da850-evm: KEYBOARD_GPIO_POLLED Kconfig conditional Ben Gardiner 2010-11-24 21:59 ` Ben Gardiner 2010-12-09 21:51 ` [PATCH v6 0/5] da850-evm: add gpio-{keys,leds} for UI and BB expanders Ben Gardiner 2010-12-09 21:51 ` [PATCH v6 1/5] Input: add input driver for polled GPIO buttons Ben Gardiner 2010-12-09 21:51 ` Ben Gardiner 2010-12-10 15:50 ` Kevin Hilman 2010-12-09 21:51 ` [PATCH v6 2/5] da850-evm: add UI Expander pushbuttons Ben Gardiner 2010-12-09 21:51 ` Ben Gardiner 2010-12-09 21:51 ` [PATCH v6 3/5] da850-evm: extract defines for SEL{A,B,C} pins in UI expander Ben Gardiner 2010-12-09 21:51 ` [PATCH v6 4/5] da850-evm: add baseboard GPIO expander buttons, switches and LEDs Ben Gardiner 2010-12-09 21:51 ` Ben Gardiner [this message] 2010-12-09 21:51 ` [PATCH v6 5/5] da850-evm: KEYBOARD_GPIO_POLLED Kconfig conditional Ben Gardiner 2010-12-10 16:16 ` [PATCH v6 0/5] da850-evm: add gpio-{keys,leds} for UI and BB expanders Kevin Hilman 2010-12-10 16:33 ` Ben Gardiner 2010-12-10 16:33 ` Ben Gardiner 2010-12-11 0:04 ` Kevin Hilman 2010-12-11 0:04 ` Kevin Hilman 2010-12-13 17:02 ` Ben Gardiner 2010-12-13 17:02 ` Ben Gardiner 2010-12-13 21:53 ` Kevin Hilman 2010-12-13 21:53 ` [PATCH v6 0/5] da850-evm: add gpio-{keys, leds} " Kevin Hilman 2010-12-14 4:31 ` [PATCH v6 0/5] da850-evm: add gpio-{keys,leds} " Ben Gardiner 2010-12-14 4:31 ` Ben Gardiner 2010-12-14 16:17 ` Ben Gardiner 2010-12-14 17:10 ` Kevin Hilman 2010-12-17 15:15 ` Ben Gardiner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=939e12134ad83efb7a8706d16afec7c12663079e.1291931041.git.bengardiner@nanometrics.ca \ --to=bengardiner@nanometrics.ca \ --cc=christophercordahi@nanometrics.ca \ --cc=davinci-linux-open-source@linux.davincidsp.com \ --cc=dmitry.torokhov@gmail.com \ --cc=juhosg@openwrt.org \ --cc=khilman@deeprootsystems.com \ --cc=lethal@linux-sh.org \ --cc=linux-input@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nsekhar@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.