From: Simon Horman <horms+renesas@verge.net.au> To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 17/17] ARM: shmobile: kzm9g-reference: Remove board C code and DT file Date: Fri, 16 Jan 2015 02:35:29 +0000 [thread overview] Message-ID: <93c9f0228a3d0a14640f86b3e8aeaf3c9b449bb7.1421371996.git.horms+renesas@verge.net.au> (raw) In-Reply-To: <cover.1421371996.git.horms+renesas@verge.net.au> From: Geert Uytterhoeven <geert+renesas@glider.be> Now that the sh73a0 generic multiplatform case has the same feature set as the kzm9g DT reference board code, we get rid of the latter. DT reference code in the future shall make use of the sh73a0 multiplatform support code with the generic SoC machine vector. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- Documentation/devicetree/bindings/arm/shmobile.txt | 2 - arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 398 --------------------- arch/arm/mach-shmobile/Kconfig | 14 - arch/arm/mach-shmobile/Makefile | 1 - arch/arm/mach-shmobile/Makefile.boot | 1 - arch/arm/mach-shmobile/board-kzm9g-reference.c | 62 ---- arch/arm/mach-shmobile/include/mach/zboot.h | 2 +- 8 files changed, 2 insertions(+), 481 deletions(-) delete mode 100644 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts delete mode 100644 arch/arm/mach-shmobile/board-kzm9g-reference.c diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 51147cb..c69f127 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -57,8 +57,6 @@ Boards: compatible = "renesas,kzm9d", "renesas,emev2" - Kyoto Microcomputer Co. KZM-A9-GT compatible = "renesas,kzm9g", "renesas,sh73a0" - - Kyoto Microcomputer Co. KZM-A9-GT - Reference Device Tree Implementation - compatible = "renesas,kzm9g-reference", "renesas,sh73a0" - Lager (RTP0RC7790SEB00010S) compatible = "renesas,lager", "renesas,r8a7790" - Mackerel (R0P7372LC0016RL, AP4 EVM 2nd) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7fa843a..9d6f5a7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -412,8 +412,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ r8a7779-marzen.dtb \ r8a7790-lager.dtb \ sh7372-mackerel.dtb \ - sh73a0-kzm9g.dtb \ - sh73a0-kzm9g-reference.dtb + sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts deleted file mode 100644 index 7ceaaa9..0000000 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ /dev/null @@ -1,398 +0,0 @@ -/* - * Device Tree Source for the KZM-A9-GT board - * - * Copyright (C) 2012 Horms Solutions Ltd. - * - * Based on sh73a0-kzm9g.dts - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "sh73a0.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "KZM-A9-GT"; - compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; - - aliases { - serial4 = &scifa4; - }; - - cpus { - cpu@0 { - cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1196000 1315000 - 598000 1175000 - 398667 1065000 - >; - voltage-tolerance = <1>; /* 1% */ - }; - }; - - chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; - stdout-path = &scifa4; - }; - - memory { - device_type = "memory"; - reg = <0x40000000 0x20000000>; - }; - - reg_1p8v: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vmmc_sdhi0: regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pfc 15 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vmmc_sdhi2: regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "SDHI2 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pfc 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - lan9220@10000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x10000000 0x100>; - phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - reg-io-width = <4>; - smsc,irq-push-pull; - smsc,save-mac-address; - vddvario-supply = <®_1p8v>; - vdd33a-supply = <®_3p3v>; - }; - - leds { - compatible = "gpio-leds"; - led1 { - gpios = <&pfc 20 GPIO_ACTIVE_LOW>; - label = "LED1"; - }; - led2 { - gpios = <&pfc 21 GPIO_ACTIVE_LOW>; - label = "LED2"; - }; - led3 { - gpios = <&pfc 22 GPIO_ACTIVE_LOW>; - label = "LED3"; - }; - led4 { - gpios = <&pfc 23 GPIO_ACTIVE_LOW>; - label = "LED4"; - }; - }; - - keyboard { - compatible = "gpio-keys"; - - back-key { - gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; - linux,code = <KEY_BACK>; - label = "SW3"; - }; - - right-key { - gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RIGHT>; - label = "SW2-R"; - }; - - left-key { - gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; - linux,code = <KEY_LEFT>; - label = "SW2-L"; - }; - - enter-key { - gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; - linux,code = <KEY_ENTER>; - label = "SW2-P"; - }; - - up-key { - gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; - linux,code = <KEY_UP>; - label = "SW2-U"; - }; - - down-key { - gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; - linux,code = <KEY_DOWN>; - label = "SW2-D"; - }; - - home-key { - gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; - linux,code = <KEY_HOME>; - label = "SW1"; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "left_j"; - simple-audio-card,cpu { - sound-dai = <&sh_fsi2 0>; - }; - simple-audio-card,codec { - sound-dai = <&ak4648>; - bitclock-master; - frame-master; - system-clock-frequency = <11289600>; - }; - }; -}; - -&cmt1 { - status = "ok"; -}; - -&extal2_clk { - clock-frequency = <48000000>; -}; - -&i2c0 { - status = "okay"; - - compass@c { - compatible = "asahi-kasei,ak8975"; - reg = <0x0c>; - interrupt-parent = <&irqpin3>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - }; - - ak4648: codec@12 { - compatible = "asahi-kasei,ak4648"; - reg = <0x12>; - #sound-dai-cells = <0>; - }; - - accelerometer@1d { - compatible = "adi,adxl34x"; - reg = <0x1d>; - interrupt-parent = <&irqpin3>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, - <3 IRQ_TYPE_LEVEL_HIGH>; - }; - - rtc@32 { - compatible = "ricoh,r2025sd"; - reg = <0x32>; - }; - - as3711@40 { - compatible = "ams,as3711"; - reg = <0x40>; - - regulators { - vdd_dvfs: sd1 { - regulator-name = "1.315V CPU"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - sd2 { - regulator-name = "1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - sd4 { - regulator-name = "1.215V"; - regulator-min-microvolt = <1215000>; - regulator-max-microvolt = <1235000>; - regulator-always-on; - regulator-boot-on; - }; - ldo2 { - regulator-name = "2.8V CPU"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo3 { - regulator-name = "3.0V CPU"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - }; - ldo4 { - regulator-name = "2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo5 { - regulator-name = "2.8V #2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo7 { - regulator-name = "1.15V CPU"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - }; - ldo8 { - regulator-name = "1.15V CPU #2"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; - - touchscreen@55 { - compatible = "sitronix,st1232"; - reg = <0x55>; - interrupt-parent = <&irqpin1>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - }; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - status = "okay"; - - pcf8575: gpio@20 { - compatible = "nxp,pcf8575"; - reg = <0x20>; - interrupt-parent = <&irqpin2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; -}; - -&mmcif { - pinctrl-0 = <&mmcif_pins>; - pinctrl-names = "default"; - - bus-width = <8>; - vmmc-supply = <®_1p8v>; - status = "okay"; -}; - -&pfc { - i2c3_pins: i2c3 { - renesas,groups = "i2c3_1"; - renesas,function = "i2c3"; - }; - - mmcif_pins: mmc { - mux { - renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; - renesas,function = "mmc0"; - }; - cfg { - renesas,groups = "mmc0_data8_0"; - renesas,pins = "PORT279"; - bias-pull-up; - }; - }; - - scifa4_pins: serial4 { - renesas,groups = "scifa4_data", "scifa4_ctrl"; - renesas,function = "scifa4"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; - renesas,function = "sdhi0"; - }; - - sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; - }; - - fsia_pins: sounda { - renesas,groups = "fsia_mclk_in", "fsia_sclk_in", - "fsia_data_in", "fsia_data_out"; - renesas,function = "fsia"; - }; -}; - -&scifa4 { - pinctrl-0 = <&scifa4_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vmmc_sdhi0>; - bus-width = <4>; - status = "okay"; -}; - -&sdhi2 { - pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vmmc_sdhi2>; - bus-width = <4>; - broken-cd; - status = "okay"; -}; - -&sh_fsi2 { - pinctrl-0 = <&fsia_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 08662eb..56d24fc 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -228,20 +228,6 @@ config MACH_KZM9G select SND_SOC_AK4642 if SND_SIMPLE_CARD select USE_OF -config MACH_KZM9G_REFERENCE - bool "KZM-A9-GT board - Reference Device Tree Implementation" - depends on ARCH_SH73A0 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SND_SOC_AK4642 if SND_SIMPLE_CARD - select USE_OF - ---help--- - Use reference implementation of KZM-A9-GT board support - which makes as greater use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - comment "Renesas ARM SoCs System Configuration" config CPU_HAS_INTEVT diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 8552c9d..7359016 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -69,7 +69,6 @@ obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o intc-sh73a0.o -obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o endif # Framework support diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 57d00ed..ee1293d 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -6,7 +6,6 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 -loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000 diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c deleted file mode 100644 index 2e82e44..0000000 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * KZM-A9-GT board support - Reference Device Tree Implementation - * - * Copyright (C) 2012 Horms Solutions Ltd. - * - * Based on board-kzm9g.c - * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/input.h> -#include <linux/of_platform.h> - -#include <asm/hardware/cache-l2x0.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "sh73a0.h" - -static void __init kzm_init(void) -{ - sh73a0_add_standard_devices_dt(); - -#ifdef CONFIG_CACHE_L2X0 - /* Shared attribute override enable, 64K*8way */ - l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); -#endif -} - -#define RESCNT2 IOMEM(0xe6188020) -static void kzm9g_restart(enum reboot_mode mode, const char *cmd) -{ - /* Do soft power on reset */ - writel((1 << 31), RESCNT2); -} - -static const char *kzm9g_boards_compat_dt[] __initdata = { - "renesas,kzm9g-reference", - NULL, -}; - -DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") - .smp = smp_ops(sh73a0_smp_ops), - .map_io = sh73a0_map_io, - .init_early = shmobile_init_delay, - .init_machine = kzm_init, - .init_late = shmobile_init_late, - .restart = kzm9g_restart, - .dt_compat = kzm9g_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h index 727cc78..219bbcf 100644 --- a/arch/arm/mach-shmobile/include/mach/zboot.h +++ b/arch/arm/mach-shmobile/include/mach/zboot.h @@ -12,7 +12,7 @@ #ifdef CONFIG_MACH_MACKEREL #define MEMORY_START 0x40000000 #include "mach/head-mackerel.txt" -#elif defined(CONFIG_MACH_KZM9G) || defined(CONFIG_MACH_KZM9G_REFERENCE) +#elif defined(CONFIG_MACH_KZM9G) #define MEMORY_START 0x43000000 #include "mach/head-kzm9g.txt" #else -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 17/17] ARM: shmobile: kzm9g-reference: Remove board C code and DT file Date: Fri, 16 Jan 2015 11:35:29 +0900 [thread overview] Message-ID: <93c9f0228a3d0a14640f86b3e8aeaf3c9b449bb7.1421371996.git.horms+renesas@verge.net.au> (raw) In-Reply-To: <cover.1421371996.git.horms+renesas@verge.net.au> From: Geert Uytterhoeven <geert+renesas@glider.be> Now that the sh73a0 generic multiplatform case has the same feature set as the kzm9g DT reference board code, we get rid of the latter. DT reference code in the future shall make use of the sh73a0 multiplatform support code with the generic SoC machine vector. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- Documentation/devicetree/bindings/arm/shmobile.txt | 2 - arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 398 --------------------- arch/arm/mach-shmobile/Kconfig | 14 - arch/arm/mach-shmobile/Makefile | 1 - arch/arm/mach-shmobile/Makefile.boot | 1 - arch/arm/mach-shmobile/board-kzm9g-reference.c | 62 ---- arch/arm/mach-shmobile/include/mach/zboot.h | 2 +- 8 files changed, 2 insertions(+), 481 deletions(-) delete mode 100644 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts delete mode 100644 arch/arm/mach-shmobile/board-kzm9g-reference.c diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 51147cb..c69f127 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -57,8 +57,6 @@ Boards: compatible = "renesas,kzm9d", "renesas,emev2" - Kyoto Microcomputer Co. KZM-A9-GT compatible = "renesas,kzm9g", "renesas,sh73a0" - - Kyoto Microcomputer Co. KZM-A9-GT - Reference Device Tree Implementation - compatible = "renesas,kzm9g-reference", "renesas,sh73a0" - Lager (RTP0RC7790SEB00010S) compatible = "renesas,lager", "renesas,r8a7790" - Mackerel (R0P7372LC0016RL, AP4 EVM 2nd) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7fa843a..9d6f5a7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -412,8 +412,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ r8a7779-marzen.dtb \ r8a7790-lager.dtb \ sh7372-mackerel.dtb \ - sh73a0-kzm9g.dtb \ - sh73a0-kzm9g-reference.dtb + sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts deleted file mode 100644 index 7ceaaa9..0000000 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ /dev/null @@ -1,398 +0,0 @@ -/* - * Device Tree Source for the KZM-A9-GT board - * - * Copyright (C) 2012 Horms Solutions Ltd. - * - * Based on sh73a0-kzm9g.dts - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "sh73a0.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "KZM-A9-GT"; - compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; - - aliases { - serial4 = &scifa4; - }; - - cpus { - cpu at 0 { - cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1196000 1315000 - 598000 1175000 - 398667 1065000 - >; - voltage-tolerance = <1>; /* 1% */ - }; - }; - - chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; - stdout-path = &scifa4; - }; - - memory { - device_type = "memory"; - reg = <0x40000000 0x20000000>; - }; - - reg_1p8v: regulator at 0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - reg_3p3v: regulator at 1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vmmc_sdhi0: regulator at 2 { - compatible = "regulator-fixed"; - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pfc 15 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vmmc_sdhi2: regulator at 3 { - compatible = "regulator-fixed"; - regulator-name = "SDHI2 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pfc 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - lan9220 at 10000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x10000000 0x100>; - phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - reg-io-width = <4>; - smsc,irq-push-pull; - smsc,save-mac-address; - vddvario-supply = <®_1p8v>; - vdd33a-supply = <®_3p3v>; - }; - - leds { - compatible = "gpio-leds"; - led1 { - gpios = <&pfc 20 GPIO_ACTIVE_LOW>; - label = "LED1"; - }; - led2 { - gpios = <&pfc 21 GPIO_ACTIVE_LOW>; - label = "LED2"; - }; - led3 { - gpios = <&pfc 22 GPIO_ACTIVE_LOW>; - label = "LED3"; - }; - led4 { - gpios = <&pfc 23 GPIO_ACTIVE_LOW>; - label = "LED4"; - }; - }; - - keyboard { - compatible = "gpio-keys"; - - back-key { - gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; - linux,code = <KEY_BACK>; - label = "SW3"; - }; - - right-key { - gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RIGHT>; - label = "SW2-R"; - }; - - left-key { - gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; - linux,code = <KEY_LEFT>; - label = "SW2-L"; - }; - - enter-key { - gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; - linux,code = <KEY_ENTER>; - label = "SW2-P"; - }; - - up-key { - gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; - linux,code = <KEY_UP>; - label = "SW2-U"; - }; - - down-key { - gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; - linux,code = <KEY_DOWN>; - label = "SW2-D"; - }; - - home-key { - gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; - linux,code = <KEY_HOME>; - label = "SW1"; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "left_j"; - simple-audio-card,cpu { - sound-dai = <&sh_fsi2 0>; - }; - simple-audio-card,codec { - sound-dai = <&ak4648>; - bitclock-master; - frame-master; - system-clock-frequency = <11289600>; - }; - }; -}; - -&cmt1 { - status = "ok"; -}; - -&extal2_clk { - clock-frequency = <48000000>; -}; - -&i2c0 { - status = "okay"; - - compass at c { - compatible = "asahi-kasei,ak8975"; - reg = <0x0c>; - interrupt-parent = <&irqpin3>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - }; - - ak4648: codec at 12 { - compatible = "asahi-kasei,ak4648"; - reg = <0x12>; - #sound-dai-cells = <0>; - }; - - accelerometer at 1d { - compatible = "adi,adxl34x"; - reg = <0x1d>; - interrupt-parent = <&irqpin3>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, - <3 IRQ_TYPE_LEVEL_HIGH>; - }; - - rtc at 32 { - compatible = "ricoh,r2025sd"; - reg = <0x32>; - }; - - as3711 at 40 { - compatible = "ams,as3711"; - reg = <0x40>; - - regulators { - vdd_dvfs: sd1 { - regulator-name = "1.315V CPU"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - sd2 { - regulator-name = "1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - sd4 { - regulator-name = "1.215V"; - regulator-min-microvolt = <1215000>; - regulator-max-microvolt = <1235000>; - regulator-always-on; - regulator-boot-on; - }; - ldo2 { - regulator-name = "2.8V CPU"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo3 { - regulator-name = "3.0V CPU"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - }; - ldo4 { - regulator-name = "2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo5 { - regulator-name = "2.8V #2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - ldo7 { - regulator-name = "1.15V CPU"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - }; - ldo8 { - regulator-name = "1.15V CPU #2"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; - - touchscreen at 55 { - compatible = "sitronix,st1232"; - reg = <0x55>; - interrupt-parent = <&irqpin1>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - }; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - status = "okay"; - - pcf8575: gpio at 20 { - compatible = "nxp,pcf8575"; - reg = <0x20>; - interrupt-parent = <&irqpin2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; -}; - -&mmcif { - pinctrl-0 = <&mmcif_pins>; - pinctrl-names = "default"; - - bus-width = <8>; - vmmc-supply = <®_1p8v>; - status = "okay"; -}; - -&pfc { - i2c3_pins: i2c3 { - renesas,groups = "i2c3_1"; - renesas,function = "i2c3"; - }; - - mmcif_pins: mmc { - mux { - renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; - renesas,function = "mmc0"; - }; - cfg { - renesas,groups = "mmc0_data8_0"; - renesas,pins = "PORT279"; - bias-pull-up; - }; - }; - - scifa4_pins: serial4 { - renesas,groups = "scifa4_data", "scifa4_ctrl"; - renesas,function = "scifa4"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; - renesas,function = "sdhi0"; - }; - - sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; - }; - - fsia_pins: sounda { - renesas,groups = "fsia_mclk_in", "fsia_sclk_in", - "fsia_data_in", "fsia_data_out"; - renesas,function = "fsia"; - }; -}; - -&scifa4 { - pinctrl-0 = <&scifa4_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vmmc_sdhi0>; - bus-width = <4>; - status = "okay"; -}; - -&sdhi2 { - pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vmmc_sdhi2>; - bus-width = <4>; - broken-cd; - status = "okay"; -}; - -&sh_fsi2 { - pinctrl-0 = <&fsia_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 08662eb..56d24fc 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -228,20 +228,6 @@ config MACH_KZM9G select SND_SOC_AK4642 if SND_SIMPLE_CARD select USE_OF -config MACH_KZM9G_REFERENCE - bool "KZM-A9-GT board - Reference Device Tree Implementation" - depends on ARCH_SH73A0 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SND_SOC_AK4642 if SND_SIMPLE_CARD - select USE_OF - ---help--- - Use reference implementation of KZM-A9-GT board support - which makes as greater use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - comment "Renesas ARM SoCs System Configuration" config CPU_HAS_INTEVT diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 8552c9d..7359016 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -69,7 +69,6 @@ obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o intc-sh73a0.o -obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o endif # Framework support diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 57d00ed..ee1293d 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -6,7 +6,6 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 -loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000 diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c deleted file mode 100644 index 2e82e44..0000000 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * KZM-A9-GT board support - Reference Device Tree Implementation - * - * Copyright (C) 2012 Horms Solutions Ltd. - * - * Based on board-kzm9g.c - * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/input.h> -#include <linux/of_platform.h> - -#include <asm/hardware/cache-l2x0.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "sh73a0.h" - -static void __init kzm_init(void) -{ - sh73a0_add_standard_devices_dt(); - -#ifdef CONFIG_CACHE_L2X0 - /* Shared attribute override enable, 64K*8way */ - l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); -#endif -} - -#define RESCNT2 IOMEM(0xe6188020) -static void kzm9g_restart(enum reboot_mode mode, const char *cmd) -{ - /* Do soft power on reset */ - writel((1 << 31), RESCNT2); -} - -static const char *kzm9g_boards_compat_dt[] __initdata = { - "renesas,kzm9g-reference", - NULL, -}; - -DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") - .smp = smp_ops(sh73a0_smp_ops), - .map_io = sh73a0_map_io, - .init_early = shmobile_init_delay, - .init_machine = kzm_init, - .init_late = shmobile_init_late, - .restart = kzm9g_restart, - .dt_compat = kzm9g_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h index 727cc78..219bbcf 100644 --- a/arch/arm/mach-shmobile/include/mach/zboot.h +++ b/arch/arm/mach-shmobile/include/mach/zboot.h @@ -12,7 +12,7 @@ #ifdef CONFIG_MACH_MACKEREL #define MEMORY_START 0x40000000 #include "mach/head-mackerel.txt" -#elif defined(CONFIG_MACH_KZM9G) || defined(CONFIG_MACH_KZM9G_REFERENCE) +#elif defined(CONFIG_MACH_KZM9G) #define MEMORY_START 0x43000000 #include "mach/head-kzm9g.txt" #else -- 2.1.4
next prev parent reply other threads:[~2015-01-16 2:35 UTC|newest] Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-12-29 1:46 [GIT PULL] Renesas ARM Based SoC sh73a0 CCF Updates for v3.20 Simon Horman 2014-12-29 1:46 ` Simon Horman 2014-12-29 1:46 ` [PATCH 1/6] clk: shmobile: sh73a0 common clock framework implementation Simon Horman 2014-12-29 1:46 ` Simon Horman 2014-12-29 1:46 ` [PATCH 2/6] ARM: shmobile: sh73a0: Add CPG register bits header Simon Horman 2014-12-29 1:46 ` Simon Horman 2014-12-29 1:46 ` [PATCH 3/6] ARM: shmobile: sh73a0: Common clock framework DT description Simon Horman 2014-12-29 1:46 ` Simon Horman 2014-12-29 1:46 ` [PATCH 4/6] ARM: shmobile: kzm9g-reference: " Simon Horman 2014-12-29 1:46 ` Simon Horman 2014-12-29 1:46 ` [PATCH 5/6] ARM: shmobile: sh73a0: add MSTP clock assignments to DT Simon Horman 2014-12-29 1:46 ` Simon Horman 2014-12-29 1:46 ` [PATCH 6/6] ARM: shmobile: sh73a0: disable legacy clock initialization Simon Horman 2014-12-29 1:46 ` Simon Horman 2015-01-12 22:34 ` [GIT PULL] Renesas ARM Based SoC sh73a0 CCF Updates for v3.20 Olof Johansson 2015-01-12 22:34 ` Olof Johansson 2015-01-13 0:38 ` Simon Horman 2015-01-13 0:38 ` Simon Horman 2015-01-13 8:12 ` Geert Uytterhoeven 2015-01-13 8:12 ` Geert Uytterhoeven 2015-01-14 0:29 ` Simon Horman 2015-01-14 0:29 ` Simon Horman 2015-01-14 10:02 ` Geert Uytterhoeven 2015-01-14 10:02 ` Geert Uytterhoeven 2015-01-15 0:01 ` Simon Horman 2015-01-15 0:01 ` Simon Horman 2015-01-16 2:35 ` [GIT PULL] Renesas ARM Based SoC Sh73a0 Multiplatform " Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 01/17] ARM: shmobile: sh73a0 dtsi: Set control-parent for all irqpin nodes Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 02/17] ARM: shmobile: kzm9g-reference dts: Sort i2c0 children by unit address Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 03/17] ARM: shmobile: kzm9g-reference dts: Add ak8975 magnetometer node Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 04/17] ARM: shmobile: kzm9g-reference dts: Add adxl345 accelerometer node Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 05/17] ARM: shmobile: kzm9g-reference dts: Add r2025sd rtc node Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 06/17] ARM: shmobile: kzm9g-reference dts: Add st1232 touchscreen node Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 07/17] ARM: shmobile: sh73a0 dtsi: Add missing INTCA0 clock for irqpin module Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 08/17] ARM: shmobile: sh73a0 dtsi: Add selectable sources to DIV6 clocks Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 09/17] ARM: shmobile: kzm9g dts: Declare the full 512 MiB of RAM Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 10/17] ARM: shmobile: kzm9g-reference " Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 11/17] ARM: shmobile: sh73a0: Introduce generic setup callback Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 12/17] ARM: shmobile: sh73a0: Add Multiplatform support Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 13/17] ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 14/17] ARM: shmobile: kzm9g: Build DTS for Multiplatform Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 15/17] ARM: shmobile: sh73a0 dtsi: Add Bus State Controller node Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` [PATCH 16/17] ARM: shmobile: kzm9g dts: Move Ethernet node to BSC Simon Horman 2015-01-16 2:35 ` Simon Horman 2015-01-16 2:35 ` Simon Horman [this message] 2015-01-16 2:35 ` [PATCH 17/17] ARM: shmobile: kzm9g-reference: Remove board C code and DT file Simon Horman 2015-01-16 8:38 ` [GIT PULL] Renesas ARM Based SoC Sh73a0 Multiplatform Updates for v3.20 Arnd Bergmann 2015-01-16 8:38 ` Arnd Bergmann 2015-01-16 12:44 ` Simon Horman 2015-01-16 12:44 ` Simon Horman 2015-01-16 14:27 ` Arnd Bergmann 2015-01-16 14:27 ` Arnd Bergmann 2015-01-21 22:55 ` Olof Johansson 2015-01-21 22:55 ` Olof Johansson 2015-01-20 1:27 ` [GIT PULL] Renesas ARM Based SoC sh73a0 DT PM " Simon Horman 2015-01-20 1:27 ` Simon Horman 2015-01-20 1:27 ` [PATCH] ARM: shmobile: sh73a0 dtsi: Add PM domain support Simon Horman 2015-01-20 1:27 ` Simon Horman 2015-01-22 1:35 ` [GIT PULL] Renesas ARM Based SoC sh73a0 DT PM Updates for v3.20 Olof Johansson 2015-01-22 1:35 ` Olof Johansson 2015-01-22 2:05 ` Simon Horman 2015-01-22 2:05 ` Simon Horman 2015-01-22 2:05 ` Simon Horman 2015-01-22 2:05 ` Simon Horman 2015-03-05 1:58 ` [GIT PULL] Renesas ARM Based SoC sh73a0 Multiplatform Updates for v4.1 Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-03-05 1:58 ` [PATCH 01/11] ARM: shmobile: sh73a0: Introduce generic setup callback Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-03-05 1:58 ` [PATCH 02/11] ARM: shmobile: sh73a0: Add Multiplatform support Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-03-05 1:58 ` [PATCH 03/11] ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-03-05 1:58 ` [PATCH 04/11] ARM: shmobile: kzm9g: Build DTS for Multiplatform Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-03-05 1:58 ` [PATCH 05/11] ARM: shmobile: sh73a0 dtsi: Add Bus State Controller node Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-03-05 1:58 ` [PATCH 06/11] ARM: shmobile: kzm9g dts: Move Ethernet node to BSC Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-03-05 1:58 ` [PATCH 07/11] ARM: shmobile: kzm9g-reference: Remove board C code and DT file Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-03-05 1:58 ` [PATCH 08/11] ARM: shmobile: sh73a0 dtsi: Add Cortex-A9 TWD node Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-03-05 1:58 ` [PATCH 09/11] ARM: shmobile: sh73a0: Remove unused sh73a0_add_standard_devices_dt() Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-03-05 1:58 ` [PATCH 10/11] ARM: shmobile: sh73a0 dtsi: Add PM domain support Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-03-05 1:58 ` [PATCH 11/11] ARM: shmobile: sh73a0: Remove restart callback Simon Horman 2015-03-05 1:58 ` Simon Horman 2015-04-01 23:38 ` [GIT PULL] Renesas ARM Based SoC sh73a0 Multiplatform Updates for v4.1 Olof Johansson 2015-04-01 23:38 ` Olof Johansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=93c9f0228a3d0a14640f86b3e8aeaf3c9b449bb7.1421371996.git.horms+renesas@verge.net.au \ --to=horms+renesas@verge.net.au \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.