* [PATCH 0/2] ref-manual: variables: document IMGDEPLOYDIR
@ 2021-06-11 6:26 Daniel Wagenknecht
2021-06-11 6:26 ` [PATCH 1/2] ref-manual: variables: update examples refering to DEPLOY_DIR_IMAGE Daniel Wagenknecht
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Daniel Wagenknecht @ 2021-06-11 6:26 UTC (permalink / raw)
To: docs; +Cc: Daniel Wagenknecht
Hello!
I recently stumbled upon direct references to DEPLOY_DIR_IMAGE when
upgrading an old Yocto Krogoth project. Those caused the symlinking of
the most recent image to fail. I needed quite some time to find the root
cause, since IMGDEPLOYDIR was not documented yet.
I'm unsure if a note to `documentation/ref-manual/migration-2.2.rst`
should also be added, since that is when the changes where introduced.
Best Regards
Daniel Wagenknecht
Daniel Wagenknecht (2):
ref-manual: variables: update examples refering to DEPLOY_DIR_IMAGE
ref-manual: variables: document IMGDEPLOYDIR
documentation/ref-manual/variables.rst | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
--
2.25.1
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/2] ref-manual: variables: update examples refering to DEPLOY_DIR_IMAGE
2021-06-11 6:26 [PATCH 0/2] ref-manual: variables: document IMGDEPLOYDIR Daniel Wagenknecht
@ 2021-06-11 6:26 ` Daniel Wagenknecht
2021-06-11 17:20 ` [docs] " Quentin Schulz
2021-06-11 6:26 ` [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR Daniel Wagenknecht
2021-06-11 6:48 ` [docs] [PATCH 0/2] " Nicolas Dechesne
2 siblings, 1 reply; 11+ messages in thread
From: Daniel Wagenknecht @ 2021-06-11 6:26 UTC (permalink / raw)
To: docs; +Cc: Daniel Wagenknecht
DEPLOY_DIR_IMAGE has been replaced by IMGDEPLOYDIR for most use cases
since OE-Core rev 6d969bacc718e21a5246d4da9bf9639dcae29b02. Update
examples given in the documentation to use IMGDEPLOYDIR and match their
implementation.
Signed-off-by: Daniel Wagenknecht <dwagenknecht@emlix.com>
---
documentation/ref-manual/variables.rst | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
index 8ebc17f24..2e859c718 100644
--- a/documentation/ref-manual/variables.rst
+++ b/documentation/ref-manual/variables.rst
@@ -2946,7 +2946,7 @@ system and gives an overview of their function and contents.
an override for the associated type. Here is an example::
IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS} \
- --faketime --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \
+ --faketime --output=${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.jffs2 \
${EXTRA_IMAGECMD}"
You typically do not need to set this variable unless you are adding
@@ -3095,10 +3095,10 @@ system and gives an overview of their function and contents.
The :ref:`image <ref-classes-image>` class defines the manifest
file as follows::
- IMAGE_MANIFEST ="${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.manifest"
+ IMAGE_MANIFEST ="${IMGDEPLOYDIR}/${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.manifest"
The location is
- derived using the :term:`DEPLOY_DIR_IMAGE`
+ derived using the :term:`IMGDEPLOYDIR`
and :term:`IMAGE_NAME` variables. You can find
information on how the image is created in the ":ref:`overview-manual/concepts:image generation`"
section in the Yocto Project Overview and Concepts Manual.
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR
2021-06-11 6:26 [PATCH 0/2] ref-manual: variables: document IMGDEPLOYDIR Daniel Wagenknecht
2021-06-11 6:26 ` [PATCH 1/2] ref-manual: variables: update examples refering to DEPLOY_DIR_IMAGE Daniel Wagenknecht
@ 2021-06-11 6:26 ` Daniel Wagenknecht
2021-06-11 6:46 ` [docs] " Nicolas Dechesne
` (2 more replies)
2021-06-11 6:48 ` [docs] [PATCH 0/2] " Nicolas Dechesne
2 siblings, 3 replies; 11+ messages in thread
From: Daniel Wagenknecht @ 2021-06-11 6:26 UTC (permalink / raw)
To: docs; +Cc: Daniel Wagenknecht
DEPLOY_DIR_IMAGE has been replaced by IMGDEPLOYDIR for most use cases
since OE-Core rev 6d969bacc718e21a5246d4da9bf9639dcae29b02. Document
IMGDEPLOYDIR and add a note to DEPLOY_DIR_IMAGE about it.
Signed-off-by: Daniel Wagenknecht <dwagenknecht@emlix.com>
---
documentation/ref-manual/variables.rst | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
index 2e859c718..8b41a1fe1 100644
--- a/documentation/ref-manual/variables.rst
+++ b/documentation/ref-manual/variables.rst
@@ -1673,6 +1673,11 @@ system and gives an overview of their function and contents.
resides within the :term:`Build Directory` as
``${DEPLOY_DIR}/images/${MACHINE}/``.
+ It is usually not used directly in recipes, but filled with the contents
+ of :term:`DEPLOYDIR` by the :ref:`deploy <ref-classes-deploy>` class or
+ with the contents of :term:`IMGDEPLOYDIR` by the :ref:`image
+ <ref-classes-image>` class.
+
For more information on the structure of the Build Directory, see
":ref:`ref-manual/structure:the build directory - \`\`build/\`\``" section.
For more detail on the contents of the ``deploy`` directory, see the
@@ -3324,6 +3329,18 @@ system and gives an overview of their function and contents.
desired, and this suffix would then be used consistently across
the build artifacts.
+ :term:`IMGDEPLOYDIR`
+ When inheriting the :ref:`image <ref-classes-image>` directly or
+ through the :ref:`core-image <ref-classes-core-image>` class, the
+ ``IMGDEPLOYDIR`` points to a temporary work area for deployed files
+ that is set in the ``image`` class as follows::
+
+ IMGDEPLOYDIR = "${WORKDIR}/deploy-${PN}-image-complete"
+
+ Recipes inheriting the ``image`` class should copy files to be
+ deployed into ``IMGDEPLOYDIR``, and the class will take care of
+ copying them into :term:`DEPLOY_DIR_IMAGE` afterwards.
+
:term:`INC_PR`
Helps define the recipe revision for recipes that share a common
``include`` file. You can think of this variable as part of the
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR
2021-06-11 6:26 ` [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR Daniel Wagenknecht
@ 2021-06-11 6:46 ` Nicolas Dechesne
2021-06-11 9:13 ` Michael Opdenacker
2021-06-11 7:30 ` [PATCH 3/3] ref-manual: migration-2.2: add note about IMGDEPLOYDIR Daniel Wagenknecht
2021-06-11 9:16 ` [docs] [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR Michael Opdenacker
2 siblings, 1 reply; 11+ messages in thread
From: Nicolas Dechesne @ 2021-06-11 6:46 UTC (permalink / raw)
To: Daniel Wagenknecht; +Cc: YP docs mailing list
[-- Attachment #1: Type: text/plain, Size: 2832 bytes --]
On Fri, Jun 11, 2021 at 8:26 AM Daniel Wagenknecht <dwagenknecht@emlix.com>
wrote:
> DEPLOY_DIR_IMAGE has been replaced by IMGDEPLOYDIR for most use cases
> since OE-Core rev 6d969bacc718e21a5246d4da9bf9639dcae29b02. Document
> IMGDEPLOYDIR and add a note to DEPLOY_DIR_IMAGE about it.
>
It's a really good idea to document that better, I've had to explain that a
few times, and it's not very intuitive for someone not familiar with how
sstate works.
Thanks!
>
> Signed-off-by: Daniel Wagenknecht <dwagenknecht@emlix.com>
> ---
> documentation/ref-manual/variables.rst | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/documentation/ref-manual/variables.rst
> b/documentation/ref-manual/variables.rst
> index 2e859c718..8b41a1fe1 100644
> --- a/documentation/ref-manual/variables.rst
> +++ b/documentation/ref-manual/variables.rst
> @@ -1673,6 +1673,11 @@ system and gives an overview of their function and
> contents.
> resides within the :term:`Build Directory` as
> ``${DEPLOY_DIR}/images/${MACHINE}/``.
>
> + It is usually not used directly in recipes, but filled with the
> contents
> + of :term:`DEPLOYDIR` by the :ref:`deploy <ref-classes-deploy>`
> class or
> + with the contents of :term:`IMGDEPLOYDIR` by the :ref:`image
> + <ref-classes-image>` class.
>
The message should be even stronger. It *must* not be used in recipes when
deploying files. It can be used only when a recipe need to 'read' a file
already deployed by a dependency of course.
> +
> For more information on the structure of the Build Directory, see
> ":ref:`ref-manual/structure:the build directory - \`\`build/\`\``"
> section.
> For more detail on the contents of the ``deploy`` directory, see the
> @@ -3324,6 +3329,18 @@ system and gives an overview of their function and
> contents.
> desired, and this suffix would then be used consistently across
> the build artifacts.
>
> + :term:`IMGDEPLOYDIR`
> + When inheriting the :ref:`image <ref-classes-image>` directly or
> + through the :ref:`core-image <ref-classes-core-image>` class, the
> + ``IMGDEPLOYDIR`` points to a temporary work area for deployed files
> + that is set in the ``image`` class as follows::
> +
> + IMGDEPLOYDIR = "${WORKDIR}/deploy-${PN}-image-complete"
> +
> + Recipes inheriting the ``image`` class should copy files to be
> + deployed into ``IMGDEPLOYDIR``, and the class will take care of
> + copying them into :term:`DEPLOY_DIR_IMAGE` afterwards.
>
+
> :term:`INC_PR`
> Helps define the recipe revision for recipes that share a common
> ``include`` file. You can think of this variable as part of the
> --
> 2.25.1
>
>
>
>
>
[-- Attachment #2: Type: text/html, Size: 3910 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 0/2] ref-manual: variables: document IMGDEPLOYDIR
2021-06-11 6:26 [PATCH 0/2] ref-manual: variables: document IMGDEPLOYDIR Daniel Wagenknecht
2021-06-11 6:26 ` [PATCH 1/2] ref-manual: variables: update examples refering to DEPLOY_DIR_IMAGE Daniel Wagenknecht
2021-06-11 6:26 ` [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR Daniel Wagenknecht
@ 2021-06-11 6:48 ` Nicolas Dechesne
2 siblings, 0 replies; 11+ messages in thread
From: Nicolas Dechesne @ 2021-06-11 6:48 UTC (permalink / raw)
To: Daniel Wagenknecht; +Cc: YP docs mailing list
[-- Attachment #1: Type: text/plain, Size: 984 bytes --]
On Fri, Jun 11, 2021 at 8:26 AM Daniel Wagenknecht <dwagenknecht@emlix.com>
wrote:
> Hello!
>
> I recently stumbled upon direct references to DEPLOY_DIR_IMAGE when
> upgrading an old Yocto Krogoth project. Those caused the symlinking of
> the most recent image to fail. I needed quite some time to find the root
> cause, since IMGDEPLOYDIR was not documented yet.
>
> I'm unsure if a note to `documentation/ref-manual/migration-2.2.rst`
> should also be added, since that is when the changes where introduced.
>
I would suggest adding it. It's an important change very visible and
impacting for users.
>
> Best Regards
> Daniel Wagenknecht
>
>
> Daniel Wagenknecht (2):
> ref-manual: variables: update examples refering to DEPLOY_DIR_IMAGE
> ref-manual: variables: document IMGDEPLOYDIR
>
> documentation/ref-manual/variables.rst | 23 ++++++++++++++++++++---
> 1 file changed, 20 insertions(+), 3 deletions(-)
>
> --
> 2.25.1
>
>
>
>
>
[-- Attachment #2: Type: text/html, Size: 1527 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 3/3] ref-manual: migration-2.2: add note about IMGDEPLOYDIR
2021-06-11 6:26 ` [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR Daniel Wagenknecht
2021-06-11 6:46 ` [docs] " Nicolas Dechesne
@ 2021-06-11 7:30 ` Daniel Wagenknecht
2021-06-11 9:16 ` [docs] [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR Michael Opdenacker
2 siblings, 0 replies; 11+ messages in thread
From: Daniel Wagenknecht @ 2021-06-11 7:30 UTC (permalink / raw)
To: docs; +Cc: Daniel Wagenknecht
Signed-off-by: Daniel Wagenknecht <dwagenknecht@emlix.com>
---
documentation/ref-manual/migration-2.2.rst | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/documentation/ref-manual/migration-2.2.rst b/documentation/ref-manual/migration-2.2.rst
index a60ce8d52..5fab00faf 100644
--- a/documentation/ref-manual/migration-2.2.rst
+++ b/documentation/ref-manual/migration-2.2.rst
@@ -263,6 +263,17 @@ If you have recipes or
classes that use ``KERNEL_IMAGE_BASE_NAME`` directly, you might need to
update the references to ensure they continue to work.
+.. _migration-2.2-imgdeploydir-replaces-deploy-dir-image-for-most-use-cases:
+
+``IMGDEPLOYDIR`` Replaces ``DEPLOY_DIR_IMAGE`` for Most Use Cases
+-----------------------------------------------------------------
+
+The :term:`IMGDEPLOYDIR` variable was introduced to allow sstate caching of
+image creation results. Image recipes defining custom :term:`IMAGE_CMD` or
+doing postprocessing on the generated images need to be adapted to use
+``IMGDEPLOYDIR`` instead of :term:`DEPLOY_DIR_IMAGE`. ``IMAGE_MANIFEST``
+creation and symlinking of the most recent image file will fail otherwise.
+
.. _migration-2.2-bitbake-changes:
BitBake Changes
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR
2021-06-11 6:46 ` [docs] " Nicolas Dechesne
@ 2021-06-11 9:13 ` Michael Opdenacker
2021-06-11 10:14 ` Daniel Wagenknecht
0 siblings, 1 reply; 11+ messages in thread
From: Michael Opdenacker @ 2021-06-11 9:13 UTC (permalink / raw)
To: Nicolas Dechesne, Daniel Wagenknecht; +Cc: YP docs mailing list
Daniel, Nicolas,
Thank you for the patch and review.
On 6/11/21 8:46 AM, Nicolas Dechesne wrote:
>
>
> + It is usually not used directly in recipes, but filled with
> the contents
> + of :term:`DEPLOYDIR` by the :ref:`deploy
> <ref-classes-deploy>` class or
> + with the contents of :term:`IMGDEPLOYDIR` by the :ref:`image
> + <ref-classes-image>` class.
>
>
> The message should be even stronger. It *must* not be used in recipes
> when deploying files. It can be used only when a recipe need to 'read'
> a file already deployed by a dependency of course.
I can try to take care of this to save you time, Daniel... Here's what
I've included in my local branch meant to merge your changes into
"master-next" of yocto-docs.
It must not be used directly in recipes when deploying files. Instead,
it's only useful when a recipe needs to "read" a file already deployed
by a dependency. So, it should be filled with the contents of
:term:`DEPLOYDIR` by the :ref:`deploy <ref-classes-deploy>` class or
with the contents of :term:`IMGDEPLOYDIR` by the :ref:`image
<ref-classes-image>` class.
I'll be happy to rephrase if you have anything better.
Cheers,
Michael.
--
Michael Opdenacker, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR
2021-06-11 6:26 ` [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR Daniel Wagenknecht
2021-06-11 6:46 ` [docs] " Nicolas Dechesne
2021-06-11 7:30 ` [PATCH 3/3] ref-manual: migration-2.2: add note about IMGDEPLOYDIR Daniel Wagenknecht
@ 2021-06-11 9:16 ` Michael Opdenacker
2 siblings, 0 replies; 11+ messages in thread
From: Michael Opdenacker @ 2021-06-11 9:16 UTC (permalink / raw)
To: Daniel Wagenknecht, docs
On 6/11/21 8:26 AM, Daniel Wagenknecht wrote:
>
> + :term:`IMGDEPLOYDIR`
> + When inheriting the :ref:`image <ref-classes-image>` directly or
I guess you meant "the :ref:`image <ref-classes-image>` *class* directly".
I fixed that in my branch too.
Thanks again,
Michael.
--
Michael Opdenacker, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR
2021-06-11 9:13 ` Michael Opdenacker
@ 2021-06-11 10:14 ` Daniel Wagenknecht
2021-06-11 16:24 ` Michael Opdenacker
0 siblings, 1 reply; 11+ messages in thread
From: Daniel Wagenknecht @ 2021-06-11 10:14 UTC (permalink / raw)
To: Michael Opdenacker, Nicolas Dechesne; +Cc: YP docs mailing list
[-- Attachment #1: Type: text/plain, Size: 729 bytes --]
Hello Michael,
On Fri, 2021-06-11 at 11:13 +0200, Michael Opdenacker wrote:
> I can try to take care of this to save you time, Daniel... Here's what
> I've included in my local branch meant to merge your changes into
> "master-next" of yocto-docs.
>
> It must not be used directly in recipes when deploying files. Instead,
> it's only useful when a recipe needs to "read" a file already deployed
> by a dependency. So, it should be filled with the contents of
> :term:`DEPLOYDIR` by the :ref:`deploy <ref-classes-deploy>` class or
> with the contents of :term:`IMGDEPLOYDIR` by the :ref:`image
> <ref-classes-image>` class.
Yes, that looks good, thank you!
Cheers
Daniel
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 849 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR
2021-06-11 10:14 ` Daniel Wagenknecht
@ 2021-06-11 16:24 ` Michael Opdenacker
0 siblings, 0 replies; 11+ messages in thread
From: Michael Opdenacker @ 2021-06-11 16:24 UTC (permalink / raw)
To: Daniel Wagenknecht, Nicolas Dechesne; +Cc: YP docs mailing list
Hi Daniel,
On 6/11/21 12:14 PM, Daniel Wagenknecht wrote:
> Hello Michael,
>
> On Fri, 2021-06-11 at 11:13 +0200, Michael Opdenacker wrote:
>> I can try to take care of this to save you time, Daniel... Here's what
>> I've included in my local branch meant to merge your changes into
>> "master-next" of yocto-docs.
>>
>> It must not be used directly in recipes when deploying files. Instead,
>> it's only useful when a recipe needs to "read" a file already deployed
>> by a dependency. So, it should be filled with the contents of
>> :term:`DEPLOYDIR` by the :ref:`deploy <ref-classes-deploy>` class or
>> with the contents of :term:`IMGDEPLOYDIR` by the :ref:`image
>> <ref-classes-image>` class.
> Yes, that looks good, thank you!
Thanks for confirming. I merged your changes into "master-next" in
yocto-docs.
Cheers,
Michael.
--
Michael Opdenacker, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 1/2] ref-manual: variables: update examples refering to DEPLOY_DIR_IMAGE
2021-06-11 6:26 ` [PATCH 1/2] ref-manual: variables: update examples refering to DEPLOY_DIR_IMAGE Daniel Wagenknecht
@ 2021-06-11 17:20 ` Quentin Schulz
0 siblings, 0 replies; 11+ messages in thread
From: Quentin Schulz @ 2021-06-11 17:20 UTC (permalink / raw)
To: Daniel Wagenknecht; +Cc: docs
Hi Daniel,
On Fri, Jun 11, 2021 at 08:26:12AM +0200, Daniel Wagenknecht wrote:
> DEPLOY_DIR_IMAGE has been replaced by IMGDEPLOYDIR for most use cases
> since OE-Core rev 6d969bacc718e21a5246d4da9bf9639dcae29b02. Update
> examples given in the documentation to use IMGDEPLOYDIR and match their
> implementation.
>
> Signed-off-by: Daniel Wagenknecht <dwagenknecht@emlix.com>
> ---
> documentation/ref-manual/variables.rst | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
> index 8ebc17f24..2e859c718 100644
> --- a/documentation/ref-manual/variables.rst
> +++ b/documentation/ref-manual/variables.rst
> @@ -2946,7 +2946,7 @@ system and gives an overview of their function and contents.
> an override for the associated type. Here is an example::
>
> IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS} \
> - --faketime --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \
> + --faketime --output=${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.jffs2 \
> ${EXTRA_IMAGECMD}"
>
It'd be awesome if you could do a follow-up patch here since this isn't the actual
content of this variable anymore.
C.f.: https://cgit.openembedded.org/openembedded-core/tree/meta/classes/image_types.bbclass#n59
> You typically do not need to set this variable unless you are adding
> @@ -3095,10 +3095,10 @@ system and gives an overview of their function and contents.
> The :ref:`image <ref-classes-image>` class defines the manifest
IMAGE_MANIFEST isn't in this class anymore, it'd be great again if you
could send a follow-up patch for this.
c.f. http://cgit.openembedded.org/openembedded-core/tree/meta/classes/rootfs-postcommands.bbclass#n31
Thanks for the patch!
Reviewed-by: Quentin Schulz <foss@0leil.net>
[...]
> The location is
> - derived using the :term:`DEPLOY_DIR_IMAGE`
> + derived using the :term:`IMGDEPLOYDIR`
On a side note: you should have added the term in the glossary (from patch 2)
first, because technically this commit does not build.
Cheers,
Quentin
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2021-06-11 17:20 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-11 6:26 [PATCH 0/2] ref-manual: variables: document IMGDEPLOYDIR Daniel Wagenknecht
2021-06-11 6:26 ` [PATCH 1/2] ref-manual: variables: update examples refering to DEPLOY_DIR_IMAGE Daniel Wagenknecht
2021-06-11 17:20 ` [docs] " Quentin Schulz
2021-06-11 6:26 ` [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR Daniel Wagenknecht
2021-06-11 6:46 ` [docs] " Nicolas Dechesne
2021-06-11 9:13 ` Michael Opdenacker
2021-06-11 10:14 ` Daniel Wagenknecht
2021-06-11 16:24 ` Michael Opdenacker
2021-06-11 7:30 ` [PATCH 3/3] ref-manual: migration-2.2: add note about IMGDEPLOYDIR Daniel Wagenknecht
2021-06-11 9:16 ` [docs] [PATCH 2/2] ref-manual: variables: document IMGDEPLOYDIR Michael Opdenacker
2021-06-11 6:48 ` [docs] [PATCH 0/2] " Nicolas Dechesne
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.