[PATCH v2 0/2] hw/arm: ast2600: Wire up eMMC controller

[PATCH v2 0/2] hw/arm: ast2600: Wire up eMMC controller

[Andrew Jeffery]

Hello,

The AST2600 has an additional SDHCI intended for use as an eMMC boot source.
These two patches rework the existing ASPEED SDHCI model to accommodate the
single-slot nature of the eMMC controller and wire it into the AST2600 SoC.

v2 contains some minor refactorings in response to issues pointed out by
Cedric.

v1 can be found here:

https://patchwork.ozlabs.org/cover/1206845/

Please review!

Andrew

Andrew Jeffery (2):
  hw/sd: Configure number of slots exposed by the ASPEED SDHCI model
  hw/arm: ast2600: Wire up the eMMC controller

 hw/arm/aspeed.c              | 27 +++++++++++++++++----------
 hw/arm/aspeed_ast2600.c      | 23 +++++++++++++++++++++++
 hw/arm/aspeed_soc.c          |  2 ++
 hw/sd/aspeed_sdhci.c         | 11 +++++++++--
 include/hw/arm/aspeed_soc.h  |  2 ++
 include/hw/sd/aspeed_sdhci.h |  1 +
 6 files changed, 54 insertions(+), 12 deletions(-)

base-commit: 6a4ef4e5d1084ce41fafa7d470a644b0fd3d9317
-- 
git-series 0.9.1

[PATCH v2 1/2] hw/sd: Configure number of slots exposed by the ASPEED SDHCI model

[Andrew Jeffery]

The AST2600 includes a second cut-down version of the SD/MMC controller
found in the AST2500, named the eMMC controller. It's cut down in the
sense that it only supports one slot rather than two, but it brings the
total number of slots supported by the AST2600 to three.

The existing code assumed that the SD controller always provided two
slots. Rework the SDHCI object to expose the number of slots as a
property to be set by the SoC configuration.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 hw/arm/aspeed.c              |  2 +-
 hw/arm/aspeed_ast2600.c      |  2 ++
 hw/arm/aspeed_soc.c          |  2 ++
 hw/sd/aspeed_sdhci.c         | 11 +++++++++--
 include/hw/sd/aspeed_sdhci.h |  1 +
 5 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 028191ff36fc..862549b1f3a9 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -259,7 +259,7 @@ static void aspeed_board_init(MachineState *machine,
         cfg->i2c_init(bmc);
     }
 
-    for (i = 0; i < ARRAY_SIZE(bmc->soc.sdhci.slots); i++) {
+    for (i = 0; i < bmc->soc.sdhci.num_slots; i++) {
         SDHCIState *sdhci = &bmc->soc.sdhci.slots[i];
         DriveInfo *dinfo = drive_get_next(IF_SD);
         BlockBackend *blk;
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index 931887ac681f..931ee5aae183 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -208,6 +208,8 @@ static void aspeed_soc_ast2600_init(Object *obj)
     sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci),
                           TYPE_ASPEED_SDHCI);
 
+    object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort);
+
     /* Init sd card slot class here so that they're under the correct parent */
     for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) {
         sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]),
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index f4fe243458fd..c39a42f914d4 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -215,6 +215,8 @@ static void aspeed_soc_init(Object *obj)
     sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci),
                           TYPE_ASPEED_SDHCI);
 
+    object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort);
+
     /* Init sd card slot class here so that they're under the correct parent */
     for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) {
         sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]),
diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
index cff3eb7dd21e..939d1510dedb 100644
--- a/hw/sd/aspeed_sdhci.c
+++ b/hw/sd/aspeed_sdhci.c
@@ -13,6 +13,7 @@
 #include "qapi/error.h"
 #include "hw/irq.h"
 #include "migration/vmstate.h"
+#include "hw/qdev-properties.h"
 
 #define ASPEED_SDHCI_INFO            0x00
 #define  ASPEED_SDHCI_INFO_RESET     0x00030000
@@ -120,14 +121,14 @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp)
 
     /* Create input irqs for the slots */
     qdev_init_gpio_in_named_with_opaque(DEVICE(sbd), aspeed_sdhci_set_irq,
-                                        sdhci, NULL, ASPEED_SDHCI_NUM_SLOTS);
+                                        sdhci, NULL, sdhci->num_slots);
 
     sysbus_init_irq(sbd, &sdhci->irq);
     memory_region_init_io(&sdhci->iomem, OBJECT(sdhci), &aspeed_sdhci_ops,
                           sdhci, TYPE_ASPEED_SDHCI, 0x1000);
     sysbus_init_mmio(sbd, &sdhci->iomem);
 
-    for (int i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) {
+    for (int i = 0; i < sdhci->num_slots; ++i) {
         Object *sdhci_slot = OBJECT(&sdhci->slots[i]);
         SysBusDevice *sbd_slot = SYS_BUS_DEVICE(&sdhci->slots[i]);
 
@@ -174,6 +175,11 @@ static const VMStateDescription vmstate_aspeed_sdhci = {
     },
 };
 
+static Property aspeed_sdhci_properties[] = {
+    DEFINE_PROP_UINT8("num-slots", AspeedSDHCIState, num_slots, 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static void aspeed_sdhci_class_init(ObjectClass *classp, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(classp);
@@ -181,6 +187,7 @@ static void aspeed_sdhci_class_init(ObjectClass *classp, void *data)
     dc->realize = aspeed_sdhci_realize;
     dc->reset = aspeed_sdhci_reset;
     dc->vmsd = &vmstate_aspeed_sdhci;
+    dc->props = aspeed_sdhci_properties;
 }
 
 static TypeInfo aspeed_sdhci_info = {
diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h
index dfdab4379021..dffbb46946b9 100644
--- a/include/hw/sd/aspeed_sdhci.h
+++ b/include/hw/sd/aspeed_sdhci.h
@@ -24,6 +24,7 @@ typedef struct AspeedSDHCIState {
     SysBusDevice parent;
 
     SDHCIState slots[ASPEED_SDHCI_NUM_SLOTS];
+    uint8_t num_slots;
 
     MemoryRegion iomem;
     qemu_irq irq;
-- 
git-series 0.9.1

[PATCH v2 2/2] hw/arm: ast2600: Wire up the eMMC controller

[Andrew Jeffery]

Initialise another SDHCI model instance for the AST2600's eMMC
controller and use the SDHCI's num_slots value introduced previously to
determine whether we should create an SD card instance for the new slot.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---

v2:
* Extract instantiation of SD cards to helper function

 hw/arm/aspeed.c             | 25 ++++++++++++++++---------
 hw/arm/aspeed_ast2600.c     | 21 +++++++++++++++++++++
 include/hw/arm/aspeed_soc.h |  2 ++
 3 files changed, 39 insertions(+), 9 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 862549b1f3a9..87baac0ea46c 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -167,6 +167,18 @@ static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
     }
 }
 
+static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo)
+{
+        BlockBackend *blk;
+        DeviceState *card;
+
+        blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
+        card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"),
+                           TYPE_SD_CARD);
+        qdev_prop_set_drive(card, "drive", blk, &error_fatal);
+        object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
+}
+
 static void aspeed_board_init(MachineState *machine,
                               const AspeedBoardConfig *cfg)
 {
@@ -260,16 +272,11 @@ static void aspeed_board_init(MachineState *machine,
     }
 
     for (i = 0; i < bmc->soc.sdhci.num_slots; i++) {
-        SDHCIState *sdhci = &bmc->soc.sdhci.slots[i];
-        DriveInfo *dinfo = drive_get_next(IF_SD);
-        BlockBackend *blk;
-        DeviceState *card;
+        sdhci_attach_drive(&bmc->soc.sdhci.slots[i], drive_get_next(IF_SD));
+    }
 
-        blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
-        card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"),
-                           TYPE_SD_CARD);
-        qdev_prop_set_drive(card, "drive", blk, &error_fatal);
-        object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
+    if (bmc->soc.emmc.num_slots) {
+        sdhci_attach_drive(&bmc->soc.emmc.slots[0], drive_get_next(IF_SD));
     }
 
     arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo);
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index 931ee5aae183..723c8196c8a5 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -46,6 +46,7 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = {
     [ASPEED_ADC]       = 0x1E6E9000,
     [ASPEED_VIDEO]     = 0x1E700000,
     [ASPEED_SDHCI]     = 0x1E740000,
+    [ASPEED_EMMC]      = 0x1E750000,
     [ASPEED_GPIO]      = 0x1E780000,
     [ASPEED_GPIO_1_8V] = 0x1E780800,
     [ASPEED_RTC]       = 0x1E781000,
@@ -64,6 +65,7 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = {
 
 #define ASPEED_SOC_AST2600_MAX_IRQ 128
 
+/* Shared Peripheral Interrupt values below are offset by -32 from datasheet */
 static const int aspeed_soc_ast2600_irqmap[] = {
     [ASPEED_UART1]     = 47,
     [ASPEED_UART2]     = 48,
@@ -77,6 +79,7 @@ static const int aspeed_soc_ast2600_irqmap[] = {
     [ASPEED_ADC]       = 78,
     [ASPEED_XDMA]      = 6,
     [ASPEED_SDHCI]     = 43,
+    [ASPEED_EMMC]      = 15,
     [ASPEED_GPIO]      = 40,
     [ASPEED_GPIO_1_8V] = 11,
     [ASPEED_RTC]       = 13,
@@ -215,6 +218,14 @@ static void aspeed_soc_ast2600_init(Object *obj)
         sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]),
                               sizeof(s->sdhci.slots[i]), TYPE_SYSBUS_SDHCI);
     }
+
+    sysbus_init_child_obj(obj, "emmc", OBJECT(&s->emmc), sizeof(s->emmc),
+                          TYPE_ASPEED_SDHCI);
+
+    object_property_set_int(OBJECT(&s->emmc), 1, "num-slots", &error_abort);
+
+    sysbus_init_child_obj(obj, "emmc[*]", OBJECT(&s->emmc.slots[0]),
+            sizeof(s->emmc.slots[0]), TYPE_SYSBUS_SDHCI);
 }
 
 /*
@@ -487,6 +498,16 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
                     sc->memmap[ASPEED_SDHCI]);
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
                        aspeed_soc_get_irq(s, ASPEED_SDHCI));
+
+    /* eMMC */
+    object_property_set_bool(OBJECT(&s->emmc), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->emmc), 0, sc->memmap[ASPEED_EMMC]);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0,
+                       aspeed_soc_get_irq(s, ASPEED_EMMC));
 }
 
 static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data)
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index 495c08be1b84..911443f4c071 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -56,6 +56,7 @@ typedef struct AspeedSoCState {
     AspeedGPIOState gpio;
     AspeedGPIOState gpio_1_8v;
     AspeedSDHCIState sdhci;
+    AspeedSDHCIState emmc;
 } AspeedSoCState;
 
 #define TYPE_ASPEED_SOC "aspeed-soc"
@@ -125,6 +126,7 @@ enum {
     ASPEED_MII4,
     ASPEED_SDRAM,
     ASPEED_XDMA,
+    ASPEED_EMMC,
 };
 
 #endif /* ASPEED_SOC_H */
-- 
git-series 0.9.1

Re: [PATCH v2 1/2] hw/sd: Configure number of slots exposed by the ASPEED SDHCI model

[Cédric Le Goater]

On 13/12/2019 05:28, Andrew Jeffery wrote:
> The AST2600 includes a second cut-down version of the SD/MMC controller
> found in the AST2500, named the eMMC controller. It's cut down in the
> sense that it only supports one slot rather than two, but it brings the
> total number of slots supported by the AST2600 to three.
> 
> The existing code assumed that the SD controller always provided two
> slots. Rework the SDHCI object to expose the number of slots as a
> property to be set by the SoC configuration.
> 
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Reviewed-by: Cédric Le Goater <clg@kaod.org>

> ---
>  hw/arm/aspeed.c              |  2 +-
>  hw/arm/aspeed_ast2600.c      |  2 ++
>  hw/arm/aspeed_soc.c          |  2 ++
>  hw/sd/aspeed_sdhci.c         | 11 +++++++++--
>  include/hw/sd/aspeed_sdhci.h |  1 +
>  5 files changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index 028191ff36fc..862549b1f3a9 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -259,7 +259,7 @@ static void aspeed_board_init(MachineState *machine,
>          cfg->i2c_init(bmc);
>      }
>  
> -    for (i = 0; i < ARRAY_SIZE(bmc->soc.sdhci.slots); i++) {
> +    for (i = 0; i < bmc->soc.sdhci.num_slots; i++) {
>          SDHCIState *sdhci = &bmc->soc.sdhci.slots[i];
>          DriveInfo *dinfo = drive_get_next(IF_SD);
>          BlockBackend *blk;
> diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
> index 931887ac681f..931ee5aae183 100644
> --- a/hw/arm/aspeed_ast2600.c
> +++ b/hw/arm/aspeed_ast2600.c
> @@ -208,6 +208,8 @@ static void aspeed_soc_ast2600_init(Object *obj)
>      sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci),
>                            TYPE_ASPEED_SDHCI);
>  
> +    object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort);
> +
>      /* Init sd card slot class here so that they're under the correct parent */
>      for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) {
>          sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]),
> diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
> index f4fe243458fd..c39a42f914d4 100644
> --- a/hw/arm/aspeed_soc.c
> +++ b/hw/arm/aspeed_soc.c
> @@ -215,6 +215,8 @@ static void aspeed_soc_init(Object *obj)
>      sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci),
>                            TYPE_ASPEED_SDHCI);
>  
> +    object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort);
> +
>      /* Init sd card slot class here so that they're under the correct parent */
>      for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) {
>          sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]),
> diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
> index cff3eb7dd21e..939d1510dedb 100644
> --- a/hw/sd/aspeed_sdhci.c
> +++ b/hw/sd/aspeed_sdhci.c
> @@ -13,6 +13,7 @@
>  #include "qapi/error.h"
>  #include "hw/irq.h"
>  #include "migration/vmstate.h"
> +#include "hw/qdev-properties.h"
>  
>  #define ASPEED_SDHCI_INFO            0x00
>  #define  ASPEED_SDHCI_INFO_RESET     0x00030000
> @@ -120,14 +121,14 @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp)
>  
>      /* Create input irqs for the slots */
>      qdev_init_gpio_in_named_with_opaque(DEVICE(sbd), aspeed_sdhci_set_irq,
> -                                        sdhci, NULL, ASPEED_SDHCI_NUM_SLOTS);
> +                                        sdhci, NULL, sdhci->num_slots);
>  
>      sysbus_init_irq(sbd, &sdhci->irq);
>      memory_region_init_io(&sdhci->iomem, OBJECT(sdhci), &aspeed_sdhci_ops,
>                            sdhci, TYPE_ASPEED_SDHCI, 0x1000);
>      sysbus_init_mmio(sbd, &sdhci->iomem);
>  
> -    for (int i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) {
> +    for (int i = 0; i < sdhci->num_slots; ++i) {
>          Object *sdhci_slot = OBJECT(&sdhci->slots[i]);
>          SysBusDevice *sbd_slot = SYS_BUS_DEVICE(&sdhci->slots[i]);
>  
> @@ -174,6 +175,11 @@ static const VMStateDescription vmstate_aspeed_sdhci = {
>      },
>  };
>  
> +static Property aspeed_sdhci_properties[] = {
> +    DEFINE_PROP_UINT8("num-slots", AspeedSDHCIState, num_slots, 0),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
>  static void aspeed_sdhci_class_init(ObjectClass *classp, void *data)
>  {
>      DeviceClass *dc = DEVICE_CLASS(classp);
> @@ -181,6 +187,7 @@ static void aspeed_sdhci_class_init(ObjectClass *classp, void *data)
>      dc->realize = aspeed_sdhci_realize;
>      dc->reset = aspeed_sdhci_reset;
>      dc->vmsd = &vmstate_aspeed_sdhci;
> +    dc->props = aspeed_sdhci_properties;
>  }
>  
>  static TypeInfo aspeed_sdhci_info = {
> diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h
> index dfdab4379021..dffbb46946b9 100644
> --- a/include/hw/sd/aspeed_sdhci.h
> +++ b/include/hw/sd/aspeed_sdhci.h
> @@ -24,6 +24,7 @@ typedef struct AspeedSDHCIState {
>      SysBusDevice parent;
>  
>      SDHCIState slots[ASPEED_SDHCI_NUM_SLOTS];
> +    uint8_t num_slots;
>  
>      MemoryRegion iomem;
>      qemu_irq irq;
> 

Re: [PATCH v2 2/2] hw/arm: ast2600: Wire up the eMMC controller

[Cédric Le Goater]

On 13/12/2019 05:28, Andrew Jeffery wrote:
> Initialise another SDHCI model instance for the AST2600's eMMC
> controller and use the SDHCI's num_slots value introduced previously to
> determine whether we should create an SD card instance for the new slot.
> 
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

Reviewed-by: Cédric Le Goater <clg@kaod.org>

> ---
> 
> v2:
> * Extract instantiation of SD cards to helper function
> 
>  hw/arm/aspeed.c             | 25 ++++++++++++++++---------
>  hw/arm/aspeed_ast2600.c     | 21 +++++++++++++++++++++
>  include/hw/arm/aspeed_soc.h |  2 ++
>  3 files changed, 39 insertions(+), 9 deletions(-)
> 
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index 862549b1f3a9..87baac0ea46c 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -167,6 +167,18 @@ static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
>      }
>  }
>  
> +static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo)
> +{
> +        BlockBackend *blk;
> +        DeviceState *card;
> +
> +        blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
> +        card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"),
> +                           TYPE_SD_CARD);
> +        qdev_prop_set_drive(card, "drive", blk, &error_fatal);
> +        object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
> +}
> +
>  static void aspeed_board_init(MachineState *machine,
>                                const AspeedBoardConfig *cfg)
>  {
> @@ -260,16 +272,11 @@ static void aspeed_board_init(MachineState *machine,
>      }
>  
>      for (i = 0; i < bmc->soc.sdhci.num_slots; i++) {
> -        SDHCIState *sdhci = &bmc->soc.sdhci.slots[i];
> -        DriveInfo *dinfo = drive_get_next(IF_SD);
> -        BlockBackend *blk;
> -        DeviceState *card;
> +        sdhci_attach_drive(&bmc->soc.sdhci.slots[i], drive_get_next(IF_SD));
> +    }
>  
> -        blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
> -        card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"),
> -                           TYPE_SD_CARD);
> -        qdev_prop_set_drive(card, "drive", blk, &error_fatal);
> -        object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
> +    if (bmc->soc.emmc.num_slots) {
> +        sdhci_attach_drive(&bmc->soc.emmc.slots[0], drive_get_next(IF_SD));
>      }
>  
>      arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo);
> diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
> index 931ee5aae183..723c8196c8a5 100644
> --- a/hw/arm/aspeed_ast2600.c
> +++ b/hw/arm/aspeed_ast2600.c
> @@ -46,6 +46,7 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = {
>      [ASPEED_ADC]       = 0x1E6E9000,
>      [ASPEED_VIDEO]     = 0x1E700000,
>      [ASPEED_SDHCI]     = 0x1E740000,
> +    [ASPEED_EMMC]      = 0x1E750000,
>      [ASPEED_GPIO]      = 0x1E780000,
>      [ASPEED_GPIO_1_8V] = 0x1E780800,
>      [ASPEED_RTC]       = 0x1E781000,
> @@ -64,6 +65,7 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = {
>  
>  #define ASPEED_SOC_AST2600_MAX_IRQ 128
>  
> +/* Shared Peripheral Interrupt values below are offset by -32 from datasheet */
>  static const int aspeed_soc_ast2600_irqmap[] = {
>      [ASPEED_UART1]     = 47,
>      [ASPEED_UART2]     = 48,
> @@ -77,6 +79,7 @@ static const int aspeed_soc_ast2600_irqmap[] = {
>      [ASPEED_ADC]       = 78,
>      [ASPEED_XDMA]      = 6,
>      [ASPEED_SDHCI]     = 43,
> +    [ASPEED_EMMC]      = 15,
>      [ASPEED_GPIO]      = 40,
>      [ASPEED_GPIO_1_8V] = 11,
>      [ASPEED_RTC]       = 13,
> @@ -215,6 +218,14 @@ static void aspeed_soc_ast2600_init(Object *obj)
>          sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]),
>                                sizeof(s->sdhci.slots[i]), TYPE_SYSBUS_SDHCI);
>      }
> +
> +    sysbus_init_child_obj(obj, "emmc", OBJECT(&s->emmc), sizeof(s->emmc),
> +                          TYPE_ASPEED_SDHCI);
> +
> +    object_property_set_int(OBJECT(&s->emmc), 1, "num-slots", &error_abort);
> +
> +    sysbus_init_child_obj(obj, "emmc[*]", OBJECT(&s->emmc.slots[0]),
> +            sizeof(s->emmc.slots[0]), TYPE_SYSBUS_SDHCI);
>  }
>  
>  /*
> @@ -487,6 +498,16 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
>                      sc->memmap[ASPEED_SDHCI]);
>      sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
>                         aspeed_soc_get_irq(s, ASPEED_SDHCI));
> +
> +    /* eMMC */
> +    object_property_set_bool(OBJECT(&s->emmc), true, "realized", &err);
> +    if (err) {
> +        error_propagate(errp, err);
> +        return;
> +    }
> +    sysbus_mmio_map(SYS_BUS_DEVICE(&s->emmc), 0, sc->memmap[ASPEED_EMMC]);
> +    sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0,
> +                       aspeed_soc_get_irq(s, ASPEED_EMMC));
>  }
>  
>  static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data)
> diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
> index 495c08be1b84..911443f4c071 100644
> --- a/include/hw/arm/aspeed_soc.h
> +++ b/include/hw/arm/aspeed_soc.h
> @@ -56,6 +56,7 @@ typedef struct AspeedSoCState {
>      AspeedGPIOState gpio;
>      AspeedGPIOState gpio_1_8v;
>      AspeedSDHCIState sdhci;
> +    AspeedSDHCIState emmc;
>  } AspeedSoCState;
>  
>  #define TYPE_ASPEED_SOC "aspeed-soc"
> @@ -125,6 +126,7 @@ enum {
>      ASPEED_MII4,
>      ASPEED_SDRAM,
>      ASPEED_XDMA,
> +    ASPEED_EMMC,
>  };
>  
>  #endif /* ASPEED_SOC_H */
> 

Re: [PATCH v2 0/2] hw/arm: ast2600: Wire up eMMC controller

[Cédric Le Goater]

On 13/12/2019 05:28, Andrew Jeffery wrote:
> Hello,
> 
> The AST2600 has an additional SDHCI intended for use as an eMMC boot source.
> These two patches rework the existing ASPEED SDHCI model to accommodate the
> single-slot nature of the eMMC controller and wire it into the AST2600 SoC.
> 
> v2 contains some minor refactorings in response to issues pointed out by
> Cedric.
 

I think these patches are based on mainline. I fixed them locally on 
my aspeed 5.0 branch and I plan to send them along with other aspeed 
changes in the 5.0 timeframe.  

Thanks,

C. 

> 
> v1 can be found here:
> 
> https://patchwork.ozlabs.org/cover/1206845/
> 
> Please review!
> 
> Andrew
> 
> Andrew Jeffery (2):
>   hw/sd: Configure number of slots exposed by the ASPEED SDHCI model
>   hw/arm: ast2600: Wire up the eMMC controller
> 
>  hw/arm/aspeed.c              | 27 +++++++++++++++++----------
>  hw/arm/aspeed_ast2600.c      | 23 +++++++++++++++++++++++
>  hw/arm/aspeed_soc.c          |  2 ++
>  hw/sd/aspeed_sdhci.c         | 11 +++++++++--
>  include/hw/arm/aspeed_soc.h  |  2 ++
>  include/hw/sd/aspeed_sdhci.h |  1 +
>  6 files changed, 54 insertions(+), 12 deletions(-)
> 
> base-commit: 6a4ef4e5d1084ce41fafa7d470a644b0fd3d9317
> 

Re: [PATCH v2 0/2] hw/arm: ast2600: Wire up eMMC controller

[Andrew Jeffery]

On Fri, 13 Dec 2019, at 18:03, Cédric Le Goater wrote:
> On 13/12/2019 05:28, Andrew Jeffery wrote:
> > Hello,
> > 
> > The AST2600 has an additional SDHCI intended for use as an eMMC boot source.
> > These two patches rework the existing ASPEED SDHCI model to accommodate the
> > single-slot nature of the eMMC controller and wire it into the AST2600 SoC.
> > 
> > v2 contains some minor refactorings in response to issues pointed out by
> > Cedric.
>  
> 
> I think these patches are based on mainline. I fixed them locally on 
> my aspeed 5.0 branch and I plan to send them along with other aspeed 
> changes in the 5.0 timeframe.  

Yeah, they're based on Peter's tree. I'll base future patches on yours.

Andrew

Re: [PATCH v2 0/2] hw/arm: ast2600: Wire up eMMC controller

[Philippe Mathieu-Daudé]

On 12/13/19 8:37 AM, Andrew Jeffery wrote:
> On Fri, 13 Dec 2019, at 18:03, Cédric Le Goater wrote:
>> On 13/12/2019 05:28, Andrew Jeffery wrote:
>>> Hello,
>>>
>>> The AST2600 has an additional SDHCI intended for use as an eMMC boot source.
>>> These two patches rework the existing ASPEED SDHCI model to accommodate the
>>> single-slot nature of the eMMC controller and wire it into the AST2600 SoC.
>>>
>>> v2 contains some minor refactorings in response to issues pointed out by
>>> Cedric.
>>   
>>
>> I think these patches are based on mainline. I fixed them locally on
>> my aspeed 5.0 branch and I plan to send them along with other aspeed
>> changes in the 5.0 timeframe.
> 
> Yeah, they're based on Peter's tree. I'll base future patches on yours.

To help any reviewer, simply add a note in the cover on which tree your 
series is based. This also works with individual patch, add the note 
under the '---' separator.