[PATCH v3 01/10] wifi: mt76: mt7996: move radio ctrl commands to proper functions

[PATCH v3 01/10] wifi: mt76: mt7996: move radio ctrl commands to proper functions

[Shayne Chen]

Move radio enable/disable commands into functions for configuring
per-phy radio.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/main.c b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
index 0975774fe244..8a1edc5c1288 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
@@ -43,6 +43,10 @@ int mt7996_run(struct ieee80211_hw *hw)
 	if (ret)
 		goto out;
 
+	ret = mt7996_mcu_set_radio_en(phy, true);
+	if (ret)
+		goto out;
+
 	ret = mt7996_mcu_set_chan_info(phy, UNI_CHANNEL_RX_PATH);
 	if (ret)
 		goto out;
@@ -82,6 +86,8 @@ static void mt7996_stop(struct ieee80211_hw *hw)
 
 	mutex_lock(&dev->mt76.mutex);
 
+	mt7996_mcu_set_radio_en(phy, false);
+
 	clear_bit(MT76_STATE_RUNNING, &phy->mt76->state);
 
 	mutex_unlock(&dev->mt76.mutex);
@@ -190,10 +196,6 @@ static int mt7996_add_interface(struct ieee80211_hw *hw,
 	if (ret)
 		goto out;
 
-	ret = mt7996_mcu_set_radio_en(phy, true);
-	if (ret)
-		goto out;
-
 	dev->mt76.vif_mask |= BIT_ULL(mvif->mt76.idx);
 	phy->omac_mask |= BIT_ULL(mvif->mt76.omac_idx);
 
@@ -253,7 +255,6 @@ static void mt7996_remove_interface(struct ieee80211_hw *hw,
 		phy->monitor_vif = NULL;
 
 	mt7996_mcu_add_dev_info(phy, vif, false);
-	mt7996_mcu_set_radio_en(phy, false);
 
 	rcu_assign_pointer(dev->mt76.wcid[idx], NULL);
 
-- 
2.39.2

[PATCH v3 02/10] wifi: mt76: connac: add support for dsp firmware download

[Shayne Chen]

From: Peter Chiu <chui-hao.chiu@mediatek.com>

Add FW_START_WORKING_PDA_DSP for the indication of starting DSP
firmware download, which is for phy-related control.
The firmware is transparent to the driver, but it's necessary for the
firmware download process.

Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
v2:
  - merge two commits
  - move main load ram code to a regular function
v3:
  - remove all macros to directly call __mt7996_load_ram()
  - add back missing code which records fw_version to wiphy
---
 .../wireless/mediatek/mt76/mt76_connac_mcu.h  |  1 +
 .../net/wireless/mediatek/mt76/mt7996/mcu.c   | 67 +++++++++----------
 .../wireless/mediatek/mt76/mt7996/mt7996.h    |  7 ++
 .../net/wireless/mediatek/mt76/mt7996/pci.c   |  1 +
 4 files changed, 42 insertions(+), 34 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index ca1ce97a6d2f..4a21c237ea6e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -22,6 +22,7 @@
 
 #define FW_START_OVERRIDE		BIT(0)
 #define FW_START_WORKING_PDA_CR4	BIT(2)
+#define FW_START_WORKING_PDA_DSP	BIT(3)
 
 #define PATCH_SEC_NOT_SUPPORT		GENMASK(31, 0)
 #define PATCH_SEC_TYPE_MASK		GENMASK(15, 0)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 88e2f9d0e513..545cc98749ac 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -2155,7 +2155,7 @@ static int mt7996_load_patch(struct mt7996_dev *dev)
 static int
 mt7996_mcu_send_ram_firmware(struct mt7996_dev *dev,
 			     const struct mt7996_fw_trailer *hdr,
-			     const u8 *data, bool is_wa)
+			     const u8 *data, enum mt7996_ram_type type)
 {
 	int i, offset = 0;
 	u32 override = 0, option = 0;
@@ -2167,8 +2167,10 @@ mt7996_mcu_send_ram_firmware(struct mt7996_dev *dev,
 
 		region = (const struct mt7996_fw_region *)((const u8 *)hdr -
 			 (hdr->n_region - i) * sizeof(*region));
+		/* DSP and WA use same mode */
 		mode = mt76_connac_mcu_gen_dl_mode(&dev->mt76,
-						   region->feature_set, is_wa);
+						   region->feature_set,
+						   type != MT7996_RAM_TYPE_WM);
 		len = le32_to_cpu(region->len);
 		addr = le32_to_cpu(region->addr);
 
@@ -2195,19 +2197,22 @@ mt7996_mcu_send_ram_firmware(struct mt7996_dev *dev,
 	if (override)
 		option |= FW_START_OVERRIDE;
 
-	if (is_wa)
+	if (type == MT7996_RAM_TYPE_WA)
 		option |= FW_START_WORKING_PDA_CR4;
+	else if (type == MT7996_RAM_TYPE_DSP)
+		option |= FW_START_WORKING_PDA_DSP;
 
 	return mt76_connac_mcu_start_firmware(&dev->mt76, override, option);
 }
 
-static int mt7996_load_ram(struct mt7996_dev *dev)
+static int __mt7996_load_ram(struct mt7996_dev *dev, const char *fw_type,
+			     const char *fw_file, enum mt7996_ram_type ram_type)
 {
 	const struct mt7996_fw_trailer *hdr;
 	const struct firmware *fw;
 	int ret;
 
-	ret = request_firmware(&fw, MT7996_FIRMWARE_WM, dev->mt76.dev);
+	ret = request_firmware(&fw, fw_file, dev->mt76.dev);
 	if (ret)
 		return ret;
 
@@ -2217,37 +2222,13 @@ static int mt7996_load_ram(struct mt7996_dev *dev)
 		goto out;
 	}
 
-	hdr = (const struct mt7996_fw_trailer *)(fw->data + fw->size - sizeof(*hdr));
-
-	dev_info(dev->mt76.dev, "WM Firmware Version: %.10s, Build Time: %.15s\n",
-		 hdr->fw_ver, hdr->build_date);
+	hdr = (const void *)(fw->data + fw->size - sizeof(*hdr));
+	dev_info(dev->mt76.dev, "%s Firmware Version: %.10s, Build Time: %.15s\n",
+		 fw_type, hdr->fw_ver, hdr->build_date);
 
-	ret = mt7996_mcu_send_ram_firmware(dev, hdr, fw->data, false);
+	ret = mt7996_mcu_send_ram_firmware(dev, hdr, fw->data, ram_type);
 	if (ret) {
-		dev_err(dev->mt76.dev, "Failed to start WM firmware\n");
-		goto out;
-	}
-
-	release_firmware(fw);
-
-	ret = request_firmware(&fw, MT7996_FIRMWARE_WA, dev->mt76.dev);
-	if (ret)
-		return ret;
-
-	if (!fw || !fw->data || fw->size < sizeof(*hdr)) {
-		dev_err(dev->mt76.dev, "Invalid firmware\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	hdr = (const struct mt7996_fw_trailer *)(fw->data + fw->size - sizeof(*hdr));
-
-	dev_info(dev->mt76.dev, "WA Firmware Version: %.10s, Build Time: %.15s\n",
-		 hdr->fw_ver, hdr->build_date);
-
-	ret = mt7996_mcu_send_ram_firmware(dev, hdr, fw->data, true);
-	if (ret) {
-		dev_err(dev->mt76.dev, "Failed to start WA firmware\n");
+		dev_err(dev->mt76.dev, "Failed to start %s firmware\n", fw_type);
 		goto out;
 	}
 
@@ -2261,6 +2242,24 @@ static int mt7996_load_ram(struct mt7996_dev *dev)
 	return ret;
 }
 
+static int mt7996_load_ram(struct mt7996_dev *dev)
+{
+	int ret;
+
+	ret = __mt7996_load_ram(dev, "WM", MT7996_FIRMWARE_WM,
+				MT7996_RAM_TYPE_WM);
+	if (ret)
+		return ret;
+
+	ret = __mt7996_load_ram(dev, "DSP", MT7996_FIRMWARE_DSP,
+				MT7996_RAM_TYPE_DSP);
+	if (ret)
+		return ret;
+
+	return __mt7996_load_ram(dev, "WA", MT7996_FIRMWARE_WA,
+				 MT7996_RAM_TYPE_WA);
+}
+
 static int
 mt7996_firmware_state(struct mt7996_dev *dev, bool wa)
 {
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
index 4d7dcb95a620..7dfdc7384056 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
@@ -29,6 +29,7 @@
 
 #define MT7996_FIRMWARE_WA		"mediatek/mt7996/mt7996_wa.bin"
 #define MT7996_FIRMWARE_WM		"mediatek/mt7996/mt7996_wm.bin"
+#define MT7996_FIRMWARE_DSP		"mediatek/mt7996/mt7996_dsp.bin"
 #define MT7996_ROM_PATCH		"mediatek/mt7996/mt7996_rom_patch.bin"
 
 #define MT7996_EEPROM_DEFAULT		"mediatek/mt7996/mt7996_eeprom.bin"
@@ -52,6 +53,12 @@ struct mt7996_sta;
 struct mt7996_dfs_pulse;
 struct mt7996_dfs_pattern;
 
+enum mt7996_ram_type {
+	MT7996_RAM_TYPE_WM,
+	MT7996_RAM_TYPE_WA,
+	MT7996_RAM_TYPE_DSP,
+};
+
 enum mt7996_txq_id {
 	MT7996_TXQ_FWDL = 16,
 	MT7996_TXQ_MCU_WM,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/pci.c b/drivers/net/wireless/mediatek/mt76/mt7996/pci.c
index 64aee3fb5445..c5301050ff8b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/pci.c
@@ -219,4 +219,5 @@ MODULE_DEVICE_TABLE(pci, mt7996_pci_device_table);
 MODULE_DEVICE_TABLE(pci, mt7996_hif_device_table);
 MODULE_FIRMWARE(MT7996_FIRMWARE_WA);
 MODULE_FIRMWARE(MT7996_FIRMWARE_WM);
+MODULE_FIRMWARE(MT7996_FIRMWARE_DSP);
 MODULE_FIRMWARE(MT7996_ROM_PATCH);
-- 
2.39.2

[PATCH v3 03/10] wifi: mt76: mt7996: fix bss wlan_idx when sending bss_info command

[Shayne Chen]

From: Peter Chiu <chui-hao.chiu@mediatek.com>

The bmc_tx_wlan_idx should be the wlan_idx of the current bss rather
than peer AP's wlan_idx, otherwise there will appear some frame
decryption problems on station mode.

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/mcu.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 545cc98749ac..6706d38cf4cf 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -712,6 +712,7 @@ mt7996_mcu_bss_basic_tlv(struct sk_buff *skb,
 	struct cfg80211_chan_def *chandef = &phy->chandef;
 	struct mt76_connac_bss_basic_tlv *bss;
 	u32 type = CONNECTION_INFRA_AP;
+	u16 sta_wlan_idx = wlan_idx;
 	struct tlv *tlv;
 	int idx;
 
@@ -731,7 +732,7 @@ mt7996_mcu_bss_basic_tlv(struct sk_buff *skb,
 				struct mt76_wcid *wcid;
 
 				wcid = (struct mt76_wcid *)sta->drv_priv;
-				wlan_idx = wcid->idx;
+				sta_wlan_idx = wcid->idx;
 			}
 			rcu_read_unlock();
 		}
@@ -751,7 +752,7 @@ mt7996_mcu_bss_basic_tlv(struct sk_buff *skb,
 	bss->bcn_interval = cpu_to_le16(vif->bss_conf.beacon_int);
 	bss->dtim_period = vif->bss_conf.dtim_period;
 	bss->bmc_tx_wlan_idx = cpu_to_le16(wlan_idx);
-	bss->sta_idx = cpu_to_le16(wlan_idx);
+	bss->sta_idx = cpu_to_le16(sta_wlan_idx);
 	bss->conn_type = cpu_to_le32(type);
 	bss->omac_idx = mvif->omac_idx;
 	bss->band_idx = mvif->band_idx;
-- 
2.39.2

[PATCH v3 04/10] wifi: mt76: mt7996: init he and eht cap for AP_VLAN

[Shayne Chen]

From: Peter Chiu <chui-hao.chiu@mediatek.com>

Init he and eht capabilities for AP_VLAN type. Without this patch, the
BA response from AP_VLAN will not include the ADDBA extension tag.

Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/init.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index f1b48cdda58f..004575a0479b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -808,6 +808,7 @@ __mt7996_set_stream_he_eht_caps(struct mt7996_phy *phy,
 		switch (i) {
 		case NL80211_IFTYPE_STATION:
 		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_AP_VLAN:
 #ifdef CONFIG_MAC80211_MESH
 		case NL80211_IFTYPE_MESH_POINT:
 #endif
-- 
2.39.2

[PATCH v3 05/10] wifi: mt76: mt7996: enable VHT extended NSS BW feature

[Shayne Chen]

From: Peter Chiu <chui-hao.chiu@mediatek.com>

Set SUPPORTS_VHT_EXT_NSS_BW to let the max BW capability correctly be
parsed by different devices.

Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/init.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index 004575a0479b..8247153d082d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -217,6 +217,8 @@ mt7996_init_wiphy(struct ieee80211_hw *hw)
 			IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
 		phy->mt76->sband_5g.sband.ht_cap.ampdu_density =
 			IEEE80211_HT_MPDU_DENSITY_1;
+
+		ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW);
 	}
 
 	mt76_set_stream_caps(phy->mt76, true);
-- 
2.39.2

[PATCH v3 06/10] wifi: mt76: connac: add support to set ifs time by mcu command

[Shayne Chen]

From: Peter Chiu <chui-hao.chiu@mediatek.com>

There's a race between driver and fw on some tx/rx control registers
when setting ifs, which will cause accidental hw queue pause problems.
Avoid this by setting ifs time with bss_info mcu command.

Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
v2:
  - merge two commits
    - wifi: mt76: connac: add a new bss_info tag for setting ifs time
    - wifi: mt76: mt7996: set ifs time by mcu command
  - change bool a_band to use is_2ghz
---
 .../wireless/mediatek/mt76/mt76_connac_mcu.h  |  1 +
 .../net/wireless/mediatek/mt76/mt7996/mac.c   | 27 +----------
 .../net/wireless/mediatek/mt76/mt7996/main.c  |  5 +-
 .../net/wireless/mediatek/mt76/mt7996/mcu.c   | 46 +++++++++++++++++++
 .../net/wireless/mediatek/mt76/mt7996/mcu.h   | 17 +++++++
 .../wireless/mediatek/mt76/mt7996/mt7996.h    |  3 +-
 6 files changed, 70 insertions(+), 29 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index 4a21c237ea6e..3790d68525e5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -1288,6 +1288,7 @@ enum {
 	UNI_BSS_INFO_UAPSD = 19,
 	UNI_BSS_INFO_PS = 21,
 	UNI_BSS_INFO_BCNFT = 22,
+	UNI_BSS_INFO_IFS_TIME = 23,
 	UNI_BSS_INFO_OFFLOAD = 25,
 	UNI_BSS_INFO_MLD = 26,
 };
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
index 130eb7b4fd91..78d9127e63ab 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
@@ -1604,20 +1604,19 @@ void mt7996_mac_reset_counters(struct mt7996_phy *phy)
 	mt7996_mcu_get_chan_mib_info(phy, true);
 }
 
-void mt7996_mac_set_timing(struct mt7996_phy *phy)
+void mt7996_mac_set_coverage_class(struct mt7996_phy *phy)
 {
 	s16 coverage_class = phy->coverage_class;
 	struct mt7996_dev *dev = phy->dev;
 	struct mt7996_phy *phy2 = mt7996_phy2(dev);
 	struct mt7996_phy *phy3 = mt7996_phy3(dev);
-	u32 val, reg_offset;
+	u32 reg_offset;
 	u32 cck = FIELD_PREP(MT_TIMEOUT_VAL_PLCP, 231) |
 		  FIELD_PREP(MT_TIMEOUT_VAL_CCA, 48);
 	u32 ofdm = FIELD_PREP(MT_TIMEOUT_VAL_PLCP, 60) |
 		   FIELD_PREP(MT_TIMEOUT_VAL_CCA, 28);
 	u8 band_idx = phy->mt76->band_idx;
 	int offset;
-	bool a_band = !(phy->mt76->chandef.chan->band == NL80211_BAND_2GHZ);
 
 	if (!test_bit(MT76_STATE_RUNNING, &phy->mt76->state))
 		return;
@@ -1630,34 +1629,12 @@ void mt7996_mac_set_timing(struct mt7996_phy *phy)
 		coverage_class = max_t(s16, coverage_class,
 				       phy3->coverage_class);
 
-	mt76_set(dev, MT_ARB_SCR(band_idx),
-		 MT_ARB_SCR_TX_DISABLE | MT_ARB_SCR_RX_DISABLE);
-	udelay(1);
-
 	offset = 3 * coverage_class;
 	reg_offset = FIELD_PREP(MT_TIMEOUT_VAL_PLCP, offset) |
 		     FIELD_PREP(MT_TIMEOUT_VAL_CCA, offset);
 
 	mt76_wr(dev, MT_TMAC_CDTR(band_idx), cck + reg_offset);
 	mt76_wr(dev, MT_TMAC_ODTR(band_idx), ofdm + reg_offset);
-	mt76_wr(dev, MT_TMAC_ICR0(band_idx),
-		FIELD_PREP(MT_IFS_EIFS_OFDM, a_band ? 84 : 78) |
-		FIELD_PREP(MT_IFS_RIFS, 2) |
-		FIELD_PREP(MT_IFS_SIFS, 10) |
-		FIELD_PREP(MT_IFS_SLOT, phy->slottime));
-
-	if (!a_band)
-		mt76_wr(dev, MT_TMAC_ICR1(band_idx),
-			FIELD_PREP(MT_IFS_EIFS_CCK, 314));
-
-	if (phy->slottime < 20 || a_band)
-		val = MT7996_CFEND_RATE_DEFAULT;
-	else
-		val = MT7996_CFEND_RATE_11B;
-
-	mt76_rmw_field(dev, MT_RATE_HRCR0(band_idx), MT_RATE_HRCR0_CFEND_RATE, val);
-	mt76_clear(dev, MT_ARB_SCR(band_idx),
-		   MT_ARB_SCR_TX_DISABLE | MT_ARB_SCR_RX_DISABLE);
 }
 
 void mt7996_mac_enable_nf(struct mt7996_dev *dev, u8 band)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/main.c b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
index 8a1edc5c1288..6001b534b657 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
@@ -287,7 +287,6 @@ int mt7996_set_channel(struct mt7996_phy *phy)
 	if (ret)
 		goto out;
 
-	mt7996_mac_set_timing(phy);
 	ret = mt7996_dfs_init_radar_detector(phy);
 	mt7996_mac_cca_stats_reset(phy);
 
@@ -565,7 +564,7 @@ static void mt7996_bss_info_changed(struct ieee80211_hw *hw,
 
 		if (slottime != phy->slottime) {
 			phy->slottime = slottime;
-			mt7996_mac_set_timing(phy);
+			mt7996_mcu_set_timing(phy, vif);
 		}
 	}
 
@@ -905,7 +904,7 @@ mt7996_set_coverage_class(struct ieee80211_hw *hw, s16 coverage_class)
 
 	mutex_lock(&dev->mt76.mutex);
 	phy->coverage_class = max_t(s16, coverage_class, 0);
-	mt7996_mac_set_timing(phy);
+	mt7996_mac_set_coverage_class(phy);
 	mutex_unlock(&dev->mt76.mutex);
 }
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 6706d38cf4cf..0ede9769a8e8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -701,6 +701,34 @@ mt7996_mcu_muar_config(struct mt7996_phy *phy, struct ieee80211_vif *vif,
 				 sizeof(req), true);
 }
 
+static void
+mt7996_mcu_bss_ifs_timing_tlv(struct sk_buff *skb, struct ieee80211_vif *vif)
+{
+	struct mt7996_vif *mvif = (struct mt7996_vif *)vif->drv_priv;
+	struct mt7996_phy *phy = mvif->phy;
+	struct bss_ifs_time_tlv *ifs_time;
+	struct tlv *tlv;
+	bool is_2ghz = phy->mt76->chandef.chan->band == NL80211_BAND_2GHZ;
+
+	tlv = mt7996_mcu_add_uni_tlv(skb, UNI_BSS_INFO_IFS_TIME, sizeof(*ifs_time));
+
+	ifs_time = (struct bss_ifs_time_tlv *)tlv;
+	ifs_time->slot_valid = true;
+	ifs_time->sifs_valid = true;
+	ifs_time->rifs_valid = true;
+	ifs_time->eifs_valid = true;
+
+	ifs_time->slot_time = cpu_to_le16(phy->slottime);
+	ifs_time->sifs_time = cpu_to_le16(10);
+	ifs_time->rifs_time = cpu_to_le16(2);
+	ifs_time->eifs_time = cpu_to_le16(is_2ghz ? 78 : 84);
+
+	if (is_2ghz) {
+		ifs_time->eifs_cck_valid = true;
+		ifs_time->eifs_cck_time = cpu_to_le16(314);
+	}
+}
+
 static int
 mt7996_mcu_bss_basic_tlv(struct sk_buff *skb,
 			 struct ieee80211_vif *vif,
@@ -826,6 +854,7 @@ int mt7996_mcu_add_bss_info(struct mt7996_phy *phy,
 		mt7996_mcu_bss_bmc_tlv(skb, vif, phy);
 		mt7996_mcu_bss_ra_tlv(skb, vif, phy);
 		mt7996_mcu_bss_txcmd_tlv(skb, true);
+		mt7996_mcu_bss_ifs_timing_tlv(skb, vif);
 
 		if (vif->bss_conf.he_support)
 			mt7996_mcu_bss_he_tlv(skb, vif, phy);
@@ -838,6 +867,23 @@ int mt7996_mcu_add_bss_info(struct mt7996_phy *phy,
 				     MCU_WMWA_UNI_CMD(BSS_INFO_UPDATE), true);
 }
 
+int mt7996_mcu_set_timing(struct mt7996_phy *phy, struct ieee80211_vif *vif)
+{
+	struct mt7996_vif *mvif = (struct mt7996_vif *)vif->drv_priv;
+	struct mt7996_dev *dev = phy->dev;
+	struct sk_buff *skb;
+
+	skb = __mt7996_mcu_alloc_bss_req(&dev->mt76, &mvif->mt76,
+					 MT7996_BSS_UPDATE_MAX_SIZE);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	mt7996_mcu_bss_ifs_timing_tlv(skb, vif);
+
+	return mt76_mcu_skb_send_msg(&dev->mt76, skb,
+				     MCU_WMWA_UNI_CMD(BSS_INFO_UPDATE), true);
+}
+
 static int
 mt7996_mcu_sta_ba(struct mt76_dev *dev, struct mt76_vif *mvif,
 		  struct ieee80211_ampdu_params *params,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h
index d7075a4d0667..078f82858621 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h
@@ -317,6 +317,22 @@ struct bss_sec_tlv {
 	u8 __rsv2[1];
 } __packed;
 
+struct bss_ifs_time_tlv {
+	__le16 tag;
+	__le16 len;
+	u8 slot_valid;
+	u8 sifs_valid;
+	u8 rifs_valid;
+	u8 eifs_valid;
+	__le16 slot_time;
+	__le16 sifs_time;
+	__le16 rifs_time;
+	__le16 eifs_time;
+	u8 eifs_cck_valid;
+	u8 rsv;
+	__le16 eifs_cck_time;
+} __packed;
+
 struct bss_power_save {
 	__le16 tag;
 	__le16 len;
@@ -552,6 +568,7 @@ enum {
 					 sizeof(struct bss_txcmd_tlv) +		\
 					 sizeof(struct bss_power_save) +	\
 					 sizeof(struct bss_sec_tlv) +		\
+					 sizeof(struct bss_ifs_time_tlv) +	\
 					 sizeof(struct bss_mld_tlv))
 
 #define MT7996_STA_UPDATE_MAX_SIZE	(sizeof(struct sta_req_hdr) +		\
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
index 7dfdc7384056..42892f06faa7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
@@ -463,6 +463,7 @@ int mt7996_mcu_set_radar_th(struct mt7996_dev *dev, int index,
 			    const struct mt7996_dfs_pattern *pattern);
 int mt7996_mcu_set_radio_en(struct mt7996_phy *phy, bool enable);
 int mt7996_mcu_set_rts_thresh(struct mt7996_phy *phy, u32 val);
+int mt7996_mcu_set_timing(struct mt7996_phy *phy, struct ieee80211_vif *vif);
 int mt7996_mcu_get_chan_mib_info(struct mt7996_phy *phy, bool chan_switch);
 int mt7996_mcu_rdd_cmd(struct mt7996_dev *dev, int cmd, u8 index,
 		       u8 rx_sel, u8 val);
@@ -526,7 +527,7 @@ void mt7996_mac_write_txwi(struct mt7996_dev *dev, __le32 *txwi,
 			   struct sk_buff *skb, struct mt76_wcid *wcid,
 			   struct ieee80211_key_conf *key, int pid,
 			   enum mt76_txq_id qid, u32 changed);
-void mt7996_mac_set_timing(struct mt7996_phy *phy);
+void mt7996_mac_set_coverage_class(struct mt7996_phy *phy);
 int mt7996_mac_sta_add(struct mt76_dev *mdev, struct ieee80211_vif *vif,
 		       struct ieee80211_sta *sta);
 void mt7996_mac_sta_remove(struct mt76_dev *mdev, struct ieee80211_vif *vif,
-- 
2.39.2

[PATCH v3 07/10] wifi: mt76: mt7996: use correct phy for background radar event

[Shayne Chen]

From: StanleyYP Wang <StanleyYP.Wang@mediatek.com>

If driver directly uses the band_idx reported from the radar event to
access mt76_phy array, it will get the wrong phy for background radar.
Fix this by adjusting the statement.

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/mcu.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 0ede9769a8e8..20519bffce21 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -339,7 +339,11 @@ mt7996_mcu_rx_radar_detected(struct mt7996_dev *dev, struct sk_buff *skb)
 	if (r->band_idx >= ARRAY_SIZE(dev->mt76.phys))
 		return;
 
-	mphy = dev->mt76.phys[r->band_idx];
+	if (dev->rdd2_phy && r->band_idx == MT_RX_SEL2)
+		mphy = dev->rdd2_phy->mt76;
+	else
+		mphy = dev->mt76.phys[r->band_idx];
+
 	if (!mphy)
 		return;
 
-- 
2.39.2

[PATCH v3 08/10] wifi: mt76: mt7996: fix WA event ring size

[Shayne Chen]

From: StanleyYP Wang <StanleyYP.Wang@mediatek.com>

Fix rx ring size of WA event to get rid of event loss and queue overflow
problems.

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/dma.c    | 2 +-
 drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/dma.c b/drivers/net/wireless/mediatek/mt76/mt7996/dma.c
index 534143465d9b..fbedaacffbba 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/dma.c
@@ -293,7 +293,7 @@ int mt7996_dma_init(struct mt7996_dev *dev)
 	/* event from WA */
 	ret = mt76_queue_alloc(dev, &dev->mt76.q_rx[MT_RXQ_MCU_WA],
 			       MT_RXQ_ID(MT_RXQ_MCU_WA),
-			       MT7996_RX_MCU_RING_SIZE,
+			       MT7996_RX_MCU_RING_SIZE_WA,
 			       MT_RX_BUF_SIZE,
 			       MT_RXQ_RING_BASE(MT_RXQ_MCU_WA));
 	if (ret)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
index 42892f06faa7..a3bd85d3df25 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
@@ -26,6 +26,7 @@
 
 #define MT7996_RX_RING_SIZE		1536
 #define MT7996_RX_MCU_RING_SIZE		512
+#define MT7996_RX_MCU_RING_SIZE_WA	1024
 
 #define MT7996_FIRMWARE_WA		"mediatek/mt7996/mt7996_wa.bin"
 #define MT7996_FIRMWARE_WM		"mediatek/mt7996/mt7996_wm.bin"
-- 
2.39.2

[PATCH v3 09/10] wifi: mt76: mt7996: add muru support

[Shayne Chen]

From: MeiChia Chiu <MeiChia.Chiu@mediatek.com>

Add sta_rec_muru() fw command to support MU-MIMO and OFDMA features.

Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 .../wireless/mediatek/mt76/mt76_connac_mcu.h  |  3 +-
 .../net/wireless/mediatek/mt76/mt7996/mcu.c   | 56 ++++++++++++++++++-
 2 files changed, 57 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index 3790d68525e5..48bced4e2e5d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -519,7 +519,8 @@ struct sta_rec_muru {
 		u8 uo_ra;
 		u8 he_2x996_tone;
 		u8 rx_t_frame_11ac;
-		u8 rsv[3];
+		u8 rx_ctrl_frame_to_mbss;
+		u8 rsv[2];
 	} ofdma_ul;
 
 	struct {
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 20519bffce21..611f6450520b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -1101,6 +1101,59 @@ mt7996_mcu_sta_amsdu_tlv(struct mt7996_dev *dev, struct sk_buff *skb,
 	}
 }
 
+static void
+mt7996_mcu_sta_muru_tlv(struct mt7996_dev *dev, struct sk_buff *skb,
+			struct ieee80211_vif *vif, struct ieee80211_sta *sta)
+{
+	struct ieee80211_he_cap_elem *elem = &sta->deflink.he_cap.he_cap_elem;
+	struct sta_rec_muru *muru;
+	struct tlv *tlv;
+
+	if (vif->type != NL80211_IFTYPE_STATION &&
+	    vif->type != NL80211_IFTYPE_AP)
+		return;
+
+	tlv = mt76_connac_mcu_add_tlv(skb, STA_REC_MURU, sizeof(*muru));
+
+	muru = (struct sta_rec_muru *)tlv;
+	muru->cfg.mimo_dl_en = vif->bss_conf.eht_mu_beamformer ||
+			       vif->bss_conf.he_mu_beamformer ||
+			       vif->bss_conf.vht_mu_beamformer ||
+			       vif->bss_conf.vht_mu_beamformee;
+	muru->cfg.ofdma_dl_en = true;
+
+	if (sta->deflink.vht_cap.vht_supported)
+		muru->mimo_dl.vht_mu_bfee =
+			!!(sta->deflink.vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
+
+	if (!sta->deflink.he_cap.has_he)
+		return;
+
+	muru->mimo_dl.partial_bw_dl_mimo =
+		HE_PHY(CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO, elem->phy_cap_info[6]);
+
+	muru->mimo_ul.full_ul_mimo =
+		HE_PHY(CAP2_UL_MU_FULL_MU_MIMO, elem->phy_cap_info[2]);
+	muru->mimo_ul.partial_ul_mimo =
+		HE_PHY(CAP2_UL_MU_PARTIAL_MU_MIMO, elem->phy_cap_info[2]);
+
+	muru->ofdma_dl.punc_pream_rx =
+		HE_PHY(CAP1_PREAMBLE_PUNC_RX_MASK, elem->phy_cap_info[1]);
+	muru->ofdma_dl.he_20m_in_40m_2g =
+		HE_PHY(CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G, elem->phy_cap_info[8]);
+	muru->ofdma_dl.he_20m_in_160m =
+		HE_PHY(CAP8_20MHZ_IN_160MHZ_HE_PPDU, elem->phy_cap_info[8]);
+	muru->ofdma_dl.he_80m_in_160m =
+		HE_PHY(CAP8_80MHZ_IN_160MHZ_HE_PPDU, elem->phy_cap_info[8]);
+
+	muru->ofdma_ul.t_frame_dur =
+		HE_MAC(CAP1_TF_MAC_PAD_DUR_MASK, elem->mac_cap_info[1]);
+	muru->ofdma_ul.mu_cascading =
+		HE_MAC(CAP2_MU_CASCADING, elem->mac_cap_info[2]);
+	muru->ofdma_ul.uo_ra =
+		HE_MAC(CAP3_OFDMA_RA, elem->mac_cap_info[3]);
+}
+
 static inline bool
 mt7996_is_ebf_supported(struct mt7996_phy *phy, struct ieee80211_vif *vif,
 			struct ieee80211_sta *sta, bool bfee)
@@ -1778,7 +1831,8 @@ int mt7996_mcu_add_sta(struct mt7996_dev *dev, struct ieee80211_vif *vif,
 		mt7996_mcu_sta_he_6g_tlv(skb, sta);
 		/* starec eht */
 		mt7996_mcu_sta_eht_tlv(skb, sta);
-		/* TODO: starec muru */
+		/* starec muru */
+		mt7996_mcu_sta_muru_tlv(dev, skb, vif, sta);
 		/* starec bfee */
 		mt7996_mcu_sta_bfee_tlv(dev, skb, vif, sta);
 		/* starec hdr trans */
-- 
2.39.2

[PATCH v3 10/10] wifi: mt76: mt7996: increase tx token size

[Shayne Chen]

From: Howard Hsu <howard-yh.hsu@mediatek.com>

Align tx token size to proprietary driver, which can improve peak
throughput under MU performance tests.

Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
index a3bd85d3df25..651f53aa0cca 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
@@ -36,7 +36,7 @@
 #define MT7996_EEPROM_DEFAULT		"mediatek/mt7996/mt7996_eeprom.bin"
 #define MT7996_EEPROM_SIZE		7680
 #define MT7996_EEPROM_BLOCK_SIZE	16
-#define MT7996_TOKEN_SIZE		8192
+#define MT7996_TOKEN_SIZE		16384
 
 #define MT7996_CFEND_RATE_DEFAULT	0x49	/* OFDM 24M */
 #define MT7996_CFEND_RATE_11B		0x03	/* 11B LP, 11M */
-- 
2.39.2

Re: [PATCH v3 04/10] wifi: mt76: mt7996: init he and eht cap for AP_VLAN

[Felix Fietkau]

On 05.06.23 17:21, Shayne Chen wrote:
> From: Peter Chiu <chui-hao.chiu@mediatek.com>
> 
> Init he and eht capabilities for AP_VLAN type. Without this patch, the
> BA response from AP_VLAN will not include the ADDBA extension tag.
If that's the case, then I think this is something that needs to be 
fixed in mac80211 instead. Since interfaces with the AP_VLAN iftype are 
not exposed to the driver, I don't see why the driver should register 
capabilities for that type.

- Felix