From: Sun Ke <sunke32@huawei.com> To: Chao Yu <chao@kernel.org>, <fstests@vger.kernel.org>, <guan@eryu.me>, <yuchao0@huawei.com>, <linux-f2fs-devel@lists.sourceforge.net> Subject: Re: [f2fs-dev] [PATCH] common/rc: f2fs do not support metadata journaling Date: Thu, 17 Jun 2021 11:45:08 +0800 [thread overview] Message-ID: <963534d2-5a42-c4c6-8bc6-013f120ecffd@huawei.com> (raw) In-Reply-To: <258b1228-2a8a-e4c1-cf6c-695f49c0cca0@kernel.org> 在 2021/6/16 20:36, Chao Yu 写道: > On 2021/6/15 11:25, Sun Ke wrote: >> >> >> 在 2021/6/11 19:22, Sun Ke 写道: >>> In generic/50, touch 100 files, go down the fs immediately, Then umount >>> and set the disk readi-only. Try to mount it again without \-o >>> norecovery\, it should fail, because it can not recovery on a read-only >>> device. But f2fs mount successfully and the test fail. >>> >>> f2fs seems do not support metadata journaling. > > It looks not correct. > > FYI, > > https://lkml.org/lkml/2021/3/23/75 > > Thanks, Your patch should fix this bug, but it still fail in 5.13.0-rc5. [root@localhost xfstests-dev]# ./check tests/generic/050 FSTYP -- f2fs PLATFORM -- Linux/x86_64 localhost 5.13.0-rc5 #2 SMP Wed Jun 16 20:36:54 CST 2021 MKFS_OPTIONS -- /dev/sdb MOUNT_OPTIONS -- -o acl,user_xattr /dev/sdb /tmp/scratch generic/050 3s ... - output mismatch (see /root/work/xfstests-dev/results//generic/050.out.bad) --- tests/generic/050.out 2021-05-31 15:37:40.000000000 +0800 +++ /root/work/xfstests-dev/results//generic/050.out.bad 2021-06-17 11:40:26.107000000 +0800 @@ -13,9 +13,7 @@ setting device read-only mounting filesystem that needs recovery on a read-only device: mount: device write-protected, mounting read-only -mount: cannot mount device read-only unmounting read-only filesystem -umount: SCRATCH_DEV: not mounted mounting filesystem with -o norecovery on a read-only device: ... (Run 'diff -u /root/work/xfstests-dev/tests/generic/050.out /root/work/xfstests-dev/results//generic/050.out.bad' to see the entire diff) Ran: generic/050 Failures: generic/050 Failed 1 of 1 tests Thanks, Sun Ke > >>> >>> Signed-off-by: Sun Ke <sunke32@huawei.com> >>> --- >>> >>> I am not very sure if f2fs do not support metadata journaling. >>> >>> ### >>> before change >>> ### >>> [root@localhost xfstests-dev]# ./check tests/generic/050 >>> FSTYP -- f2fs >>> PLATFORM -- Linux/x86_64 localhost 5.12.0-rc5-next-20210330 #8 >>> SMP Tue Jun 8 11:09:37 CST 2021 >>> MKFS_OPTIONS -- /dev/sdb >>> MOUNT_OPTIONS -- -o acl,user_xattr /dev/sdb /tmp/scratch >>> >>> generic/050 4s ... - output mismatch (see >>> /root/work/xfstests-dev/results//generic/050.out.bad) >>> --- tests/generic/050.out 2021-05-31 15:37:40.000000000 +0800 >>> +++ /root/work/xfstests-dev/results//generic/050.out.bad >>> 2021-06-11 16:48:19.993000000 +0800 >>> @@ -13,9 +13,7 @@ >>> setting device read-only >>> mounting filesystem that needs recovery on a read-only device: >>> mount: device write-protected, mounting read-only >>> -mount: cannot mount device read-only >>> unmounting read-only filesystem >>> -umount: SCRATCH_DEV: not mounted >>> mounting filesystem with -o norecovery on a read-only device: >>> ... >>> (Run 'diff -u /root/work/xfstests-dev/tests/generic/050.out >>> /root/work/xfstests-dev/results//generic/050.out.bad' to see the >>> entire diff) >>> Ran: generic/050 >>> Failures: generic/050 >>> Failed 1 of 1 tests >>> >>> ### >>> after change >>> ### >>> [root@localhost xfstests-dev]# ./check tests/generic/050 >>> FSTYP -- f2fs >>> PLATFORM -- Linux/x86_64 localhost 5.12.0-rc5-next-20210330 #8 >>> SMP Tue Jun 8 11:09:37 CST 2021 >>> MKFS_OPTIONS -- /dev/sdb >>> MOUNT_OPTIONS -- -o acl,user_xattr /dev/sdb /tmp/scratch >>> >>> generic/050 4s ... 4s >>> Ran: generic/050 >>> Passed all 1 tests >>> >>> >>> >>> common/rc | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/common/rc b/common/rc >>> index a0aa7300..428b8b80 100644 >>> --- a/common/rc >>> +++ b/common/rc >>> @@ -3543,7 +3543,7 @@ _has_metadata_journaling() >>> fi >>> case "$FSTYP" in >>> - ext2|vfat|msdos|udf|exfat|tmpfs) >>> + ext2|vfat|msdos|udf|exfat|tmpfs|f2fs) >>> echo "$FSTYP does not support metadata journaling" >>> return 1 >>> ;; >>> >> >> >> _______________________________________________ >> Linux-f2fs-devel mailing list >> Linux-f2fs-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel > .
WARNING: multiple messages have this Message-ID (diff)
From: Sun Ke <sunke32@huawei.com> To: Chao Yu <chao@kernel.org>, <fstests@vger.kernel.org>, <guan@eryu.me>, <yuchao0@huawei.com>, <linux-f2fs-devel@lists.sourceforge.net> Subject: Re: [f2fs-dev] [PATCH] common/rc: f2fs do not support metadata journaling Date: Thu, 17 Jun 2021 11:45:08 +0800 [thread overview] Message-ID: <963534d2-5a42-c4c6-8bc6-013f120ecffd@huawei.com> (raw) In-Reply-To: <258b1228-2a8a-e4c1-cf6c-695f49c0cca0@kernel.org> 在 2021/6/16 20:36, Chao Yu 写道: > On 2021/6/15 11:25, Sun Ke wrote: >> >> >> 在 2021/6/11 19:22, Sun Ke 写道: >>> In generic/50, touch 100 files, go down the fs immediately, Then umount >>> and set the disk readi-only. Try to mount it again without \-o >>> norecovery\, it should fail, because it can not recovery on a read-only >>> device. But f2fs mount successfully and the test fail. >>> >>> f2fs seems do not support metadata journaling. > > It looks not correct. > > FYI, > > https://lkml.org/lkml/2021/3/23/75 > > Thanks, Your patch should fix this bug, but it still fail in 5.13.0-rc5. [root@localhost xfstests-dev]# ./check tests/generic/050 FSTYP -- f2fs PLATFORM -- Linux/x86_64 localhost 5.13.0-rc5 #2 SMP Wed Jun 16 20:36:54 CST 2021 MKFS_OPTIONS -- /dev/sdb MOUNT_OPTIONS -- -o acl,user_xattr /dev/sdb /tmp/scratch generic/050 3s ... - output mismatch (see /root/work/xfstests-dev/results//generic/050.out.bad) --- tests/generic/050.out 2021-05-31 15:37:40.000000000 +0800 +++ /root/work/xfstests-dev/results//generic/050.out.bad 2021-06-17 11:40:26.107000000 +0800 @@ -13,9 +13,7 @@ setting device read-only mounting filesystem that needs recovery on a read-only device: mount: device write-protected, mounting read-only -mount: cannot mount device read-only unmounting read-only filesystem -umount: SCRATCH_DEV: not mounted mounting filesystem with -o norecovery on a read-only device: ... (Run 'diff -u /root/work/xfstests-dev/tests/generic/050.out /root/work/xfstests-dev/results//generic/050.out.bad' to see the entire diff) Ran: generic/050 Failures: generic/050 Failed 1 of 1 tests Thanks, Sun Ke > >>> >>> Signed-off-by: Sun Ke <sunke32@huawei.com> >>> --- >>> >>> I am not very sure if f2fs do not support metadata journaling. >>> >>> ### >>> before change >>> ### >>> [root@localhost xfstests-dev]# ./check tests/generic/050 >>> FSTYP -- f2fs >>> PLATFORM -- Linux/x86_64 localhost 5.12.0-rc5-next-20210330 #8 >>> SMP Tue Jun 8 11:09:37 CST 2021 >>> MKFS_OPTIONS -- /dev/sdb >>> MOUNT_OPTIONS -- -o acl,user_xattr /dev/sdb /tmp/scratch >>> >>> generic/050 4s ... - output mismatch (see >>> /root/work/xfstests-dev/results//generic/050.out.bad) >>> --- tests/generic/050.out 2021-05-31 15:37:40.000000000 +0800 >>> +++ /root/work/xfstests-dev/results//generic/050.out.bad >>> 2021-06-11 16:48:19.993000000 +0800 >>> @@ -13,9 +13,7 @@ >>> setting device read-only >>> mounting filesystem that needs recovery on a read-only device: >>> mount: device write-protected, mounting read-only >>> -mount: cannot mount device read-only >>> unmounting read-only filesystem >>> -umount: SCRATCH_DEV: not mounted >>> mounting filesystem with -o norecovery on a read-only device: >>> ... >>> (Run 'diff -u /root/work/xfstests-dev/tests/generic/050.out >>> /root/work/xfstests-dev/results//generic/050.out.bad' to see the >>> entire diff) >>> Ran: generic/050 >>> Failures: generic/050 >>> Failed 1 of 1 tests >>> >>> ### >>> after change >>> ### >>> [root@localhost xfstests-dev]# ./check tests/generic/050 >>> FSTYP -- f2fs >>> PLATFORM -- Linux/x86_64 localhost 5.12.0-rc5-next-20210330 #8 >>> SMP Tue Jun 8 11:09:37 CST 2021 >>> MKFS_OPTIONS -- /dev/sdb >>> MOUNT_OPTIONS -- -o acl,user_xattr /dev/sdb /tmp/scratch >>> >>> generic/050 4s ... 4s >>> Ran: generic/050 >>> Passed all 1 tests >>> >>> >>> >>> common/rc | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/common/rc b/common/rc >>> index a0aa7300..428b8b80 100644 >>> --- a/common/rc >>> +++ b/common/rc >>> @@ -3543,7 +3543,7 @@ _has_metadata_journaling() >>> fi >>> case "$FSTYP" in >>> - ext2|vfat|msdos|udf|exfat|tmpfs) >>> + ext2|vfat|msdos|udf|exfat|tmpfs|f2fs) >>> echo "$FSTYP does not support metadata journaling" >>> return 1 >>> ;; >>> >> >> >> _______________________________________________ >> Linux-f2fs-devel mailing list >> Linux-f2fs-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel > . _______________________________________________ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
next prev parent reply other threads:[~2021-06-17 3:45 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-11 11:22 [PATCH] common/rc: f2fs do not support metadata journaling Sun Ke 2021-06-11 11:22 ` [PATCH] generic/103: leave more space for f2fs Sun Ke 2021-06-13 14:44 ` Eryu Guan 2021-06-15 3:36 ` Sun Ke 2021-06-15 3:28 ` Sun Ke 2021-06-15 3:28 ` [f2fs-dev] " Sun Ke 2021-06-16 13:15 ` Chao Yu 2021-06-16 13:15 ` Chao Yu 2021-06-17 6:22 ` Sun Ke 2021-06-17 6:22 ` Sun Ke 2021-06-11 11:22 ` [PATCH] generic/260: f2fs is also special Sun Ke 2021-06-15 3:29 ` Sun Ke 2021-06-15 3:29 ` [f2fs-dev] " Sun Ke 2021-06-16 13:43 ` Chao Yu 2021-06-16 13:43 ` Chao Yu 2021-06-17 6:38 ` Sun Ke 2021-06-17 6:38 ` Sun Ke 2021-06-15 3:25 ` [PATCH] common/rc: f2fs do not support metadata journaling Sun Ke 2021-06-15 3:25 ` [f2fs-dev] " Sun Ke 2021-06-16 12:36 ` Chao Yu 2021-06-16 12:36 ` Chao Yu 2021-06-17 3:45 ` Sun Ke [this message] 2021-06-17 3:45 ` Sun Ke 2021-06-17 23:46 ` Chao Yu 2021-06-17 23:46 ` Chao Yu 2021-06-18 2:03 ` Sun Ke 2021-06-18 2:03 ` Sun Ke
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=963534d2-5a42-c4c6-8bc6-013f120ecffd@huawei.com \ --to=sunke32@huawei.com \ --cc=chao@kernel.org \ --cc=fstests@vger.kernel.org \ --cc=guan@eryu.me \ --cc=linux-f2fs-devel@lists.sourceforge.net \ --cc=yuchao0@huawei.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.