* [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
@ 2020-09-01 8:57 ` Yangbo Lu
2020-09-01 8:57 ` [v4, 01/11] mmc: add a reinit() API Yangbo Lu
` (12 more replies)
0 siblings, 13 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:57 UTC (permalink / raw)
To: u-boot
This patch-set is to support eMMC HS200 and HS400 speed modes for
eSDHC, and enable them on LX2160ARDB board.
CI build link
https://travis-ci.org/github/yangbolu1991/u-boot-test/builds/720875619
Changes for v2:
- Added two patches to fix stability issue.
Changes for v3:
- Explained more in commit messages.
- Added HS400 exit code for downgrade.
Changes for v4:
- Checked returning of mmc_hs400_prepare_ddr().
- Added Reviewed-by.
- Rebased.
Yangbo Lu (11):
mmc: add a reinit() API
mmc: fsl_esdhc: add a reinit() callback
mmc: fsl_esdhc: support tuning for eMMC HS200
mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
mmc: add a hs400_tuning flag
mmc: add a mmc_hs400_prepare_ddr() interface
mmc: fsl_esdhc: support eMMC HS400 mode
mmc: fsl_esdhc: fix mmc->clock with actual clock
mmc: fsl_esdhc: fix eMMC HS400 stability issue
arm: dts: lx2160ardb: support eMMC HS400 mode
configs: lx2160ardb: enable eMMC HS400 mode support
arch/arm/dts/fsl-lx2160a-rdb.dts | 2 +
configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/lx2160ardb_tfa_defconfig | 1 +
configs/lx2160ardb_tfa_stmm_defconfig | 1 +
drivers/mmc/fsl_esdhc.c | 176 ++++++++++++++++++++++++++-
drivers/mmc/mmc-uclass.c | 30 +++++
drivers/mmc/mmc.c | 14 ++-
include/fsl_esdhc.h | 29 ++++-
include/mmc.h | 26 +++-
9 files changed, 270 insertions(+), 10 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 17+ messages in thread
* [v4, 01/11] mmc: add a reinit() API
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
@ 2020-09-01 8:57 ` Yangbo Lu
2020-09-01 8:58 ` [v4, 02/11] mmc: fsl_esdhc: add a reinit() callback Yangbo Lu
` (11 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:57 UTC (permalink / raw)
To: u-boot
For DM_MMC, the controller re-initialization is needed to
clear old configuration for mmc rescan.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
---
Changes for v2:
- None.
Changes for v3:
- None.
Changes for v4:
- Added Reviewed-by.
---
drivers/mmc/mmc-uclass.c | 15 +++++++++++++++
drivers/mmc/mmc.c | 8 ++++++--
include/mmc.h | 10 ++++++++++
3 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
index 90690c8..b90e1ee 100644
--- a/drivers/mmc/mmc-uclass.c
+++ b/drivers/mmc/mmc-uclass.c
@@ -171,6 +171,21 @@ int mmc_deferred_probe(struct mmc *mmc)
return dm_mmc_deferred_probe(mmc->dev);
}
+int dm_mmc_reinit(struct udevice *dev)
+{
+ struct dm_mmc_ops *ops = mmc_get_ops(dev);
+
+ if (ops->reinit)
+ return ops->reinit(dev);
+
+ return 0;
+}
+
+int mmc_reinit(struct mmc *mmc)
+{
+ return dm_mmc_reinit(mmc->dev);
+}
+
int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg)
{
int val;
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index d79cdef..0727505 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -2816,13 +2816,17 @@ int mmc_get_op_cond(struct mmc *mmc)
return err;
#if CONFIG_IS_ENABLED(DM_MMC)
- /* The device has already been probed ready for use */
+ /*
+ * Re-initialization is needed to clear old configuration for
+ * mmc rescan.
+ */
+ err = mmc_reinit(mmc);
#else
/* made sure it's not NULL earlier */
err = mmc->cfg->ops->init(mmc);
+#endif
if (err)
return err;
-#endif
mmc->ddr_mode = 0;
retry:
diff --git a/include/mmc.h b/include/mmc.h
index 8256219..161b8bc 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -422,6 +422,14 @@ struct dm_mmc_ops {
*/
int (*deferred_probe)(struct udevice *dev);
/**
+ * reinit() - Re-initialization to clear old configuration for
+ * mmc rescan.
+ *
+ * @dev: Device to reinit
+ * @return 0 if Ok, -ve if error
+ */
+ int (*reinit)(struct udevice *dev);
+ /**
* send_cmd() - Send a command to the MMC device
*
* @dev: Device to receive the command
@@ -518,6 +526,7 @@ int dm_mmc_execute_tuning(struct udevice *dev, uint opcode);
int dm_mmc_wait_dat0(struct udevice *dev, int state, int timeout_us);
int dm_mmc_host_power_cycle(struct udevice *dev);
int dm_mmc_deferred_probe(struct udevice *dev);
+int dm_mmc_reinit(struct udevice *dev);
int dm_mmc_get_b_max(struct udevice *dev, void *dst, lbaint_t blkcnt);
/* Transition functions for compatibility */
@@ -529,6 +538,7 @@ int mmc_wait_dat0(struct mmc *mmc, int state, int timeout_us);
int mmc_set_enhanced_strobe(struct mmc *mmc);
int mmc_host_power_cycle(struct mmc *mmc);
int mmc_deferred_probe(struct mmc *mmc);
+int mmc_reinit(struct mmc *mmc);
int mmc_get_b_max(struct mmc *mmc, void *dst, lbaint_t blkcnt);
#else
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [v4, 02/11] mmc: fsl_esdhc: add a reinit() callback
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
2020-09-01 8:57 ` [v4, 01/11] mmc: add a reinit() API Yangbo Lu
@ 2020-09-01 8:58 ` Yangbo Lu
2020-09-01 8:58 ` [v4, 03/11] mmc: fsl_esdhc: support tuning for eMMC HS200 Yangbo Lu
` (10 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:58 UTC (permalink / raw)
To: u-boot
Add a reinit() callback for mmc rescan.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
---
Changes for v2:
- None.
Changes for v3:
- None.
Changes for v4:
- Added Reviewed-by.
---
drivers/mmc/fsl_esdhc.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index de9fe01..83feaf1 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -907,6 +907,14 @@ static int fsl_esdhc_set_ios(struct udevice *dev)
return esdhc_set_ios_common(priv, &plat->mmc);
}
+static int fsl_esdhc_reinit(struct udevice *dev)
+{
+ struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
+ struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+
+ return esdhc_init_common(priv, &plat->mmc);
+}
+
static const struct dm_mmc_ops fsl_esdhc_ops = {
.get_cd = fsl_esdhc_get_cd,
.send_cmd = fsl_esdhc_send_cmd,
@@ -914,6 +922,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
#ifdef MMC_SUPPORTS_TUNING
.execute_tuning = fsl_esdhc_execute_tuning,
#endif
+ .reinit = fsl_esdhc_reinit,
};
static const struct udevice_id fsl_esdhc_ids[] = {
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [v4, 03/11] mmc: fsl_esdhc: support tuning for eMMC HS200
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
2020-09-01 8:57 ` [v4, 01/11] mmc: add a reinit() API Yangbo Lu
2020-09-01 8:58 ` [v4, 02/11] mmc: fsl_esdhc: add a reinit() callback Yangbo Lu
@ 2020-09-01 8:58 ` Yangbo Lu
2020-09-01 8:58 ` [v4, 04/11] mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init Yangbo Lu
` (9 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:58 UTC (permalink / raw)
To: u-boot
Support tuning process for eMMC HS200 for eSDHC.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
- None.
Changes for v3:
- Rebased.
Changes for v4:
- None.
---
drivers/mmc/fsl_esdhc.c | 106 ++++++++++++++++++++++++++++++++++++++++++++++--
include/fsl_esdhc.h | 17 ++++++--
2 files changed, 116 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 83feaf1..4e04c10 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -60,7 +60,9 @@ struct fsl_esdhc {
uint dmaerrattr; /* DMA error attribute register */
char reserved5[4]; /* reserved */
uint hostcapblt2; /* Host controller capabilities register 2 */
- char reserved6[756]; /* reserved */
+ char reserved6[8]; /* reserved */
+ uint tbctl; /* Tuning block control register */
+ char reserved7[744]; /* reserved */
uint esdhcctl; /* eSDHC control register */
};
@@ -101,7 +103,9 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
if (data) {
xfertyp |= XFERTYP_DPSEL;
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
- xfertyp |= XFERTYP_DMAEN;
+ if (cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK &&
+ cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK_HS200)
+ xfertyp |= XFERTYP_DMAEN;
#endif
if (data->blocks > 1) {
xfertyp |= XFERTYP_MSBSEL;
@@ -380,6 +384,10 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
esdhc_write32(®s->cmdarg, cmd->cmdarg);
esdhc_write32(®s->xfertyp, xfertyp);
+ if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
+ cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)
+ flags = IRQSTAT_BRR;
+
/* Wait for the command to complete */
start = get_timer(0);
while (!(esdhc_read32(®s->irqstat) & flags)) {
@@ -439,6 +447,11 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
esdhc_pio_read_write(priv, data);
#else
+ flags = DATA_COMPLETE;
+ if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
+ cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)
+ flags = IRQSTAT_BRR;
+
do {
irqstat = esdhc_read32(®s->irqstat);
@@ -451,7 +464,7 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
err = -ECOMM;
goto out;
}
- } while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
+ } while ((irqstat & flags) != flags);
/*
* Need invalidate the dcache here again to avoid any
@@ -555,6 +568,19 @@ static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
}
}
+static void esdhc_set_timing(struct fsl_esdhc_priv *priv, enum bus_mode mode)
+{
+ struct fsl_esdhc *regs = priv->esdhc_regs;
+
+ esdhc_clock_control(priv, false);
+
+ if (mode == MMC_HS_200)
+ esdhc_clrsetbits32(®s->autoc12err, UHSM_MASK,
+ UHSM_SDR104_HS200);
+
+ esdhc_clock_control(priv, true);
+}
+
static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
{
struct fsl_esdhc *regs = priv->esdhc_regs;
@@ -570,6 +596,9 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
if (priv->clock != mmc->clock)
set_sysctl(priv, mmc, mmc->clock);
+ /* Set timing */
+ esdhc_set_timing(priv, mmc->selected_mode);
+
/* Set the bus width */
esdhc_clrbits32(®s->proctl, PROCTL_DTW_4 | PROCTL_DTW_8);
@@ -915,6 +944,77 @@ static int fsl_esdhc_reinit(struct udevice *dev)
return esdhc_init_common(priv, &plat->mmc);
}
+#ifdef MMC_SUPPORTS_TUNING
+static void esdhc_flush_async_fifo(struct fsl_esdhc_priv *priv)
+{
+ struct fsl_esdhc *regs = priv->esdhc_regs;
+ u32 time_out;
+
+ esdhc_setbits32(®s->esdhcctl, ESDHCCTL_FAF);
+
+ time_out = 20;
+ while (esdhc_read32(®s->esdhcctl) & ESDHCCTL_FAF) {
+ if (time_out == 0) {
+ printf("fsl_esdhc: Flush asynchronous FIFO timeout.\n");
+ break;
+ }
+ time_out--;
+ mdelay(1);
+ }
+}
+
+static void esdhc_tuning_block_enable(struct fsl_esdhc_priv *priv,
+ bool en)
+{
+ struct fsl_esdhc *regs = priv->esdhc_regs;
+
+ esdhc_clock_control(priv, false);
+ esdhc_flush_async_fifo(priv);
+ if (en)
+ esdhc_setbits32(®s->tbctl, TBCTL_TB_EN);
+ else
+ esdhc_clrbits32(®s->tbctl, TBCTL_TB_EN);
+ esdhc_clock_control(priv, true);
+}
+
+static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
+{
+ struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
+ struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+ struct fsl_esdhc *regs = priv->esdhc_regs;
+ u32 val, irqstaten;
+ int i;
+
+ esdhc_tuning_block_enable(priv, true);
+ esdhc_setbits32(®s->autoc12err, EXECUTE_TUNING);
+
+ irqstaten = esdhc_read32(®s->irqstaten);
+ esdhc_write32(®s->irqstaten, IRQSTATEN_BRR);
+
+ for (i = 0; i < MAX_TUNING_LOOP; i++) {
+ mmc_send_tuning(&plat->mmc, opcode, NULL);
+ mdelay(1);
+
+ val = esdhc_read32(®s->autoc12err);
+ if (!(val & EXECUTE_TUNING)) {
+ if (val & SMPCLKSEL)
+ break;
+ }
+ }
+
+ esdhc_write32(®s->irqstaten, irqstaten);
+
+ if (i != MAX_TUNING_LOOP)
+ return 0;
+
+ printf("fsl_esdhc: tuning failed!\n");
+ esdhc_clrbits32(®s->autoc12err, SMPCLKSEL);
+ esdhc_clrbits32(®s->autoc12err, EXECUTE_TUNING);
+ esdhc_tuning_block_enable(priv, false);
+ return -ETIMEDOUT;
+}
+#endif
+
static const struct dm_mmc_ops fsl_esdhc_ops = {
.get_cd = fsl_esdhc_get_cd,
.send_cmd = fsl_esdhc_send_cmd,
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 7f8f8ed..0a426e1 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -74,8 +74,10 @@
#define IRQSTATEN_TC (0x00000002)
#define IRQSTATEN_CC (0x00000001)
+/* eSDHC control register */
#define ESDHCCTL 0x0002e40c
#define ESDHCCTL_PCS (0x00080000)
+#define ESDHCCTL_FAF (0x00040000)
#define PRSSTAT 0x0002e024
#define PRSSTAT_DAT0 (0x01000000)
@@ -154,6 +156,12 @@
#define BLKATTR_SIZE(x) (x & 0x1fff)
#define MAX_BLK_CNT 0x7fff /* so malloc will have enough room with 32M */
+/* Auto CMD error status register / system control 2 register */
+#define EXECUTE_TUNING 0x00400000
+#define SMPCLKSEL 0x00800000
+#define UHSM_MASK 0x00070000
+#define UHSM_SDR104_HS200 0x00030000
+
/* Host controller capabilities register */
#define HOSTCAPBLT_VS18 0x04000000
#define HOSTCAPBLT_VS30 0x02000000
@@ -162,6 +170,11 @@
#define HOSTCAPBLT_DMAS 0x00400000
#define HOSTCAPBLT_HSS 0x00200000
+/* Tuning block control register */
+#define TBCTL_TB_EN 0x00000004
+
+#define MAX_TUNING_LOOP 40
+
struct fsl_esdhc_cfg {
phys_addr_t esdhc_base;
u32 sdhc_clk;
@@ -203,10 +216,6 @@ struct fsl_esdhc_cfg {
int fsl_esdhc_mmc_init(struct bd_info *bis);
int fsl_esdhc_initialize(struct bd_info *bis, struct fsl_esdhc_cfg *cfg);
void fdt_fixup_esdhc(void *blob, struct bd_info *bd);
-#ifdef MMC_SUPPORTS_TUNING
-static inline int fsl_esdhc_execute_tuning(struct udevice *dev,
- uint32_t opcode) {return 0; }
-#endif
#else
static inline int fsl_esdhc_mmc_init(struct bd_info *bis) { return -ENOSYS; }
static inline void fdt_fixup_esdhc(void *blob, struct bd_info *bd) {}
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [v4, 04/11] mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
` (2 preceding siblings ...)
2020-09-01 8:58 ` [v4, 03/11] mmc: fsl_esdhc: support tuning for eMMC HS200 Yangbo Lu
@ 2020-09-01 8:58 ` Yangbo Lu
2020-09-01 8:58 ` [v4, 05/11] mmc: add a hs400_tuning flag Yangbo Lu
` (8 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:58 UTC (permalink / raw)
To: u-boot
Clean TBCTL[TB_EN] manually during init since it is not able to
be reset by reset all operation.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
- None.
Changes for v3:
- None.
Changes for v4:
- None.
---
drivers/mmc/fsl_esdhc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 4e04c10..e7db55d 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -637,6 +637,9 @@ static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
return -ETIMEDOUT;
}
+ /* Clean TBCTL[TB_EN] which is not able to be reset by reset all */
+ esdhc_clrbits32(®s->tbctl, TBCTL_TB_EN);
+
esdhc_enable_cache_snooping(regs);
esdhc_setbits32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [v4, 05/11] mmc: add a hs400_tuning flag
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
` (3 preceding siblings ...)
2020-09-01 8:58 ` [v4, 04/11] mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init Yangbo Lu
@ 2020-09-01 8:58 ` Yangbo Lu
2020-09-01 8:58 ` [v4, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface Yangbo Lu
` (7 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:58 UTC (permalink / raw)
To: u-boot
Some controllers may have difference between HS200 tuning
and HS400 tuning, such as different registers setting,
different procedure, or different errata.
This patch is to add a hs400_tuning flag to identify the
tuning for HS400 mode.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
- None.
Changes for v3:
- Explained more in commit messages.
Changes for v4:
- None.
---
drivers/mmc/mmc.c | 2 ++
include/mmc.h | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 0727505..b75c2bc 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1982,7 +1982,9 @@ static int mmc_select_hs400(struct mmc *mmc)
mmc_set_clock(mmc, mmc->tran_speed, false);
/* execute tuning if needed */
+ mmc->hs400_tuning = 1;
err = mmc_execute_tuning(mmc, MMC_CMD_SEND_TUNING_BLOCK_HS200);
+ mmc->hs400_tuning = 0;
if (err) {
debug("tuning failed\n");
return err;
diff --git a/include/mmc.h b/include/mmc.h
index 161b8bc..2399cc2 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -707,6 +707,7 @@ struct mmc {
* accessing the boot partitions
*/
u32 quirks;
+ u8 hs400_tuning;
};
struct mmc_hwpart_conf {
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [v4, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
` (4 preceding siblings ...)
2020-09-01 8:58 ` [v4, 05/11] mmc: add a hs400_tuning flag Yangbo Lu
@ 2020-09-01 8:58 ` Yangbo Lu
2020-09-01 8:58 ` [v4, 07/11] mmc: fsl_esdhc: support eMMC HS400 mode Yangbo Lu
` (6 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:58 UTC (permalink / raw)
To: u-boot
Add a mmc_hs400_prepare_ddr() interface for controllers
which needs preparation before switching to DDR mode for
HS400 mode.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
- None.
Changes for v3:
- None.
Changes for v4:
- Checked returning of mmc_hs400_prepare_ddr().
---
drivers/mmc/mmc-uclass.c | 15 +++++++++++++++
drivers/mmc/mmc.c | 4 ++++
include/mmc.h | 15 ++++++++++++++-
3 files changed, 33 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
index b90e1ee..ec59bcd 100644
--- a/drivers/mmc/mmc-uclass.c
+++ b/drivers/mmc/mmc-uclass.c
@@ -142,6 +142,21 @@ int mmc_set_enhanced_strobe(struct mmc *mmc)
}
#endif
+int dm_mmc_hs400_prepare_ddr(struct udevice *dev)
+{
+ struct dm_mmc_ops *ops = mmc_get_ops(dev);
+
+ if (ops->hs400_prepare_ddr)
+ return ops->hs400_prepare_ddr(dev);
+
+ return 0;
+}
+
+int mmc_hs400_prepare_ddr(struct mmc *mmc)
+{
+ return dm_mmc_hs400_prepare_ddr(mmc->dev);
+}
+
int dm_mmc_host_power_cycle(struct udevice *dev)
{
struct dm_mmc_ops *ops = mmc_get_ops(dev);
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index b75c2bc..8502503 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1993,6 +1993,10 @@ static int mmc_select_hs400(struct mmc *mmc)
/* Set back to HS */
mmc_set_card_speed(mmc, MMC_HS, true);
+ err = mmc_hs400_prepare_ddr(mmc);
+ if (err)
+ return err;
+
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH,
EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_FLAG);
if (err)
diff --git a/include/mmc.h b/include/mmc.h
index 2399cc2..659df75 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -513,6 +513,14 @@ struct dm_mmc_ops {
* @return maximum number of blocks for this transfer
*/
int (*get_b_max)(struct udevice *dev, void *dst, lbaint_t blkcnt);
+
+ /**
+ * hs400_prepare_ddr - prepare to switch to DDR mode
+ *
+ * @dev: Device to check
+ * @return 0 if success, -ve on error
+ */
+ int (*hs400_prepare_ddr)(struct udevice *dev);
};
#define mmc_get_ops(dev) ((struct dm_mmc_ops *)(dev)->driver->ops)
@@ -540,7 +548,7 @@ int mmc_host_power_cycle(struct mmc *mmc);
int mmc_deferred_probe(struct mmc *mmc);
int mmc_reinit(struct mmc *mmc);
int mmc_get_b_max(struct mmc *mmc, void *dst, lbaint_t blkcnt);
-
+int mmc_hs400_prepare_ddr(struct mmc *mmc);
#else
struct mmc_ops {
int (*send_cmd)(struct mmc *mmc,
@@ -552,6 +560,11 @@ struct mmc_ops {
int (*host_power_cycle)(struct mmc *mmc);
int (*get_b_max)(struct mmc *mmc, void *dst, lbaint_t blkcnt);
};
+
+static inline int mmc_hs400_prepare_ddr(struct mmc *mmc)
+{
+ return 0;
+}
#endif
struct mmc_config {
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [v4, 07/11] mmc: fsl_esdhc: support eMMC HS400 mode
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
` (5 preceding siblings ...)
2020-09-01 8:58 ` [v4, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface Yangbo Lu
@ 2020-09-01 8:58 ` Yangbo Lu
2020-09-01 8:58 ` [v4, 08/11] mmc: fsl_esdhc: fix mmc->clock with actual clock Yangbo Lu
` (5 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:58 UTC (permalink / raw)
To: u-boot
The process for eMMC HS400 mode for eSDHC is,
1. Perform the Tuning Process at the HS400 target operating frequency.
Latched the clock division value.
2. if read transaction, then set the SDTIMNGCTL[FLW_CTL_BG].
3. Switch to High Speed mode and then set the card clock frequency to
a value not greater than 52Mhz
4. Clear TBCTL[TB_EN],tuning block enable bit.
5. Change to 8 bit DDR Mode
6. Switch the card to HS400 mode.
7. Set TBCTL[TB_EN], tuning block enable bit.
8. Clear SYSCTL[SDCLKEN]
9. Wait for PRSSTAT[SDSTB] to be set
10. Change the clock division to latched value.Set TBCTL[HS 400 mode]
and Set SDCLKCTL[CMD_CLK_CTRL]
11. Set SYSCTL[SDCLKEN]
12. Wait for PRSSTAT[SDSTB] to be set
13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL].
14. Wait for delay chain to lock.
15. Set TBCTL[HS400_WNDW_ADJUST]
16. Again clear SYSCTL[SDCLKEN]
17. Wait for PRSSTAT[SDSTB] to be set
18. Set ESDHCCTL[FAF]
19. Wait for ESDHCCTL[FAF] to be cleared
20. Set SYSCTL[SDCLKEN]
21. Wait for PRSSTAT[SDSTB] to be set.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
- None.
Changes for v3:
- Added HS400 exit code for downgrade.
Changes for v4:
- None.
---
drivers/mmc/fsl_esdhc.c | 120 ++++++++++++++++++++++++++++++++++--------------
include/fsl_esdhc.h | 12 +++++
2 files changed, 98 insertions(+), 34 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index e7db55d..c53751d 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -62,7 +62,12 @@ struct fsl_esdhc {
uint hostcapblt2; /* Host controller capabilities register 2 */
char reserved6[8]; /* reserved */
uint tbctl; /* Tuning block control register */
- char reserved7[744]; /* reserved */
+ char reserved7[32]; /* reserved */
+ uint sdclkctl; /* SD clock control register */
+ uint sdtimingctl; /* SD timing control register */
+ char reserved8[20]; /* reserved */
+ uint dllcfg0; /* DLL config 0 register */
+ char reserved9[680]; /* reserved */
uint esdhcctl; /* eSDHC control register */
};
@@ -568,16 +573,80 @@ static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
}
}
+static void esdhc_flush_async_fifo(struct fsl_esdhc_priv *priv)
+{
+ struct fsl_esdhc *regs = priv->esdhc_regs;
+ u32 time_out;
+
+ esdhc_setbits32(®s->esdhcctl, ESDHCCTL_FAF);
+
+ time_out = 20;
+ while (esdhc_read32(®s->esdhcctl) & ESDHCCTL_FAF) {
+ if (time_out == 0) {
+ printf("fsl_esdhc: Flush asynchronous FIFO timeout.\n");
+ break;
+ }
+ time_out--;
+ mdelay(1);
+ }
+}
+
+static void esdhc_tuning_block_enable(struct fsl_esdhc_priv *priv,
+ bool en)
+{
+ struct fsl_esdhc *regs = priv->esdhc_regs;
+
+ esdhc_clock_control(priv, false);
+ esdhc_flush_async_fifo(priv);
+ if (en)
+ esdhc_setbits32(®s->tbctl, TBCTL_TB_EN);
+ else
+ esdhc_clrbits32(®s->tbctl, TBCTL_TB_EN);
+ esdhc_clock_control(priv, true);
+}
+
+static void esdhc_exit_hs400(struct fsl_esdhc_priv *priv)
+{
+ struct fsl_esdhc *regs = priv->esdhc_regs;
+
+ esdhc_clrbits32(®s->sdtimingctl, FLW_CTL_BG);
+ esdhc_clrbits32(®s->sdclkctl, CMD_CLK_CTL);
+
+ esdhc_clock_control(priv, false);
+ esdhc_clrbits32(®s->tbctl, HS400_MODE);
+ esdhc_clock_control(priv, true);
+
+ esdhc_clrbits32(®s->dllcfg0, DLL_FREQ_SEL | DLL_ENABLE);
+ esdhc_clrbits32(®s->tbctl, HS400_WNDW_ADJUST);
+
+ esdhc_tuning_block_enable(priv, false);
+}
+
static void esdhc_set_timing(struct fsl_esdhc_priv *priv, enum bus_mode mode)
{
struct fsl_esdhc *regs = priv->esdhc_regs;
+ /* Exit HS400 mode before setting any other mode */
+ if (esdhc_read32(®s->tbctl) & HS400_MODE &&
+ mode != MMC_HS_400)
+ esdhc_exit_hs400(priv);
+
esdhc_clock_control(priv, false);
if (mode == MMC_HS_200)
esdhc_clrsetbits32(®s->autoc12err, UHSM_MASK,
UHSM_SDR104_HS200);
+ if (mode == MMC_HS_400) {
+ esdhc_setbits32(®s->tbctl, HS400_MODE);
+ esdhc_setbits32(®s->sdclkctl, CMD_CLK_CTL);
+ esdhc_clock_control(priv, true);
+ esdhc_setbits32(®s->dllcfg0, DLL_ENABLE | DLL_FREQ_SEL);
+ esdhc_setbits32(®s->tbctl, HS400_WNDW_ADJUST);
+
+ esdhc_clock_control(priv, false);
+ esdhc_flush_async_fifo(priv);
+ }
esdhc_clock_control(priv, true);
}
@@ -592,6 +661,9 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
esdhc_clock_control(priv, true);
}
+ if (mmc->selected_mode == MMC_HS_400)
+ esdhc_tuning_block_enable(priv, true);
+
/* Set the clock speed */
if (priv->clock != mmc->clock)
set_sysctl(priv, mmc, mmc->clock);
@@ -948,38 +1020,6 @@ static int fsl_esdhc_reinit(struct udevice *dev)
}
#ifdef MMC_SUPPORTS_TUNING
-static void esdhc_flush_async_fifo(struct fsl_esdhc_priv *priv)
-{
- struct fsl_esdhc *regs = priv->esdhc_regs;
- u32 time_out;
-
- esdhc_setbits32(®s->esdhcctl, ESDHCCTL_FAF);
-
- time_out = 20;
- while (esdhc_read32(®s->esdhcctl) & ESDHCCTL_FAF) {
- if (time_out == 0) {
- printf("fsl_esdhc: Flush asynchronous FIFO timeout.\n");
- break;
- }
- time_out--;
- mdelay(1);
- }
-}
-
-static void esdhc_tuning_block_enable(struct fsl_esdhc_priv *priv,
- bool en)
-{
- struct fsl_esdhc *regs = priv->esdhc_regs;
-
- esdhc_clock_control(priv, false);
- esdhc_flush_async_fifo(priv);
- if (en)
- esdhc_setbits32(®s->tbctl, TBCTL_TB_EN);
- else
- esdhc_clrbits32(®s->tbctl, TBCTL_TB_EN);
- esdhc_clock_control(priv, true);
-}
-
static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
{
struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
@@ -1007,8 +1047,11 @@ static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
esdhc_write32(®s->irqstaten, irqstaten);
- if (i != MAX_TUNING_LOOP)
+ if (i != MAX_TUNING_LOOP) {
+ if (plat->mmc.hs400_tuning)
+ esdhc_setbits32(®s->sdtimingctl, FLW_CTL_BG);
return 0;
+ }
printf("fsl_esdhc: tuning failed!\n");
esdhc_clrbits32(®s->autoc12err, SMPCLKSEL);
@@ -1018,6 +1061,14 @@ static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
}
#endif
+int fsl_esdhc_hs400_prepare_ddr(struct udevice *dev)
+{
+ struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+
+ esdhc_tuning_block_enable(priv, false);
+ return 0;
+}
+
static const struct dm_mmc_ops fsl_esdhc_ops = {
.get_cd = fsl_esdhc_get_cd,
.send_cmd = fsl_esdhc_send_cmd,
@@ -1026,6 +1077,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
.execute_tuning = fsl_esdhc_execute_tuning,
#endif
.reinit = fsl_esdhc_reinit,
+ .hs400_prepare_ddr = fsl_esdhc_hs400_prepare_ddr,
};
static const struct udevice_id fsl_esdhc_ids[] = {
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 0a426e1..cc11966 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -172,6 +172,18 @@
/* Tuning block control register */
#define TBCTL_TB_EN 0x00000004
+#define HS400_MODE 0x00000010
+#define HS400_WNDW_ADJUST 0x00000040
+
+/* SD clock control register */
+#define CMD_CLK_CTL 0x00008000
+
+/* SD timing control register */
+#define FLW_CTL_BG 0x00008000
+
+/* DLL config 0 register */
+#define DLL_ENABLE 0x80000000
+#define DLL_FREQ_SEL 0x08000000
#define MAX_TUNING_LOOP 40
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [v4, 08/11] mmc: fsl_esdhc: fix mmc->clock with actual clock
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
` (6 preceding siblings ...)
2020-09-01 8:58 ` [v4, 07/11] mmc: fsl_esdhc: support eMMC HS400 mode Yangbo Lu
@ 2020-09-01 8:58 ` Yangbo Lu
2020-09-01 8:58 ` [v4, 09/11] mmc: fsl_esdhc: fix eMMC HS400 stability issue Yangbo Lu
` (4 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:58 UTC (permalink / raw)
To: u-boot
Fix mmc->clock with actual clock which is divided by the
controller, and record it with priv->clock which was removed
accidentally.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
- Added this patch.
Changes for v3:
- None.
Changes for v4:
- None.
---
drivers/mmc/fsl_esdhc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index c53751d..ce87416 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -523,6 +523,9 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock)
while (sdhc_clk / (div * pre_div) > clock && div < 16)
div++;
+ mmc->clock = sdhc_clk / pre_div / div;
+ priv->clock = mmc->clock;
+
pre_div >>= 1;
div -= 1;
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [v4, 09/11] mmc: fsl_esdhc: fix eMMC HS400 stability issue
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
` (7 preceding siblings ...)
2020-09-01 8:58 ` [v4, 08/11] mmc: fsl_esdhc: fix mmc->clock with actual clock Yangbo Lu
@ 2020-09-01 8:58 ` Yangbo Lu
2020-09-01 8:58 ` [v4, 10/11] arm: dts: lx2160ardb: support eMMC HS400 mode Yangbo Lu
` (3 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:58 UTC (permalink / raw)
To: u-boot
There was a fix-up for eMMC HS400 stability issue in Linux.
Patch link:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?id=58d0bf843b49fa99588ac9f85178bd8dfd651b53
Description:
Currently only LX2160A eSDHC supports eMMC HS400. According to
a large number of tests, eMMC HS400 failed to work at 150MHz,
and for a few boards failed to work at 175MHz. But eMMC HS400
worked fine on 200MHz. We hadn't found the root cause but
setting eSDHC_DLLCFG0[DLL_FREQ_SEL] = 0 using slow delay chain
seemed to resovle this issue. Let's use this as fixup for now.
Introduce the fix-up in u-boot since the issue could be reproduced
in u-boot too.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
- Added this patch.
Changes for v3:
- None.
Changes for v4:
- None.
---
drivers/mmc/fsl_esdhc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index ce87416..a6092ad 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -644,7 +644,10 @@ static void esdhc_set_timing(struct fsl_esdhc_priv *priv, enum bus_mode mode)
esdhc_setbits32(®s->sdclkctl, CMD_CLK_CTL);
esdhc_clock_control(priv, true);
- esdhc_setbits32(®s->dllcfg0, DLL_ENABLE | DLL_FREQ_SEL);
+ if (priv->clock == 200000000)
+ esdhc_setbits32(®s->dllcfg0, DLL_FREQ_SEL);
+
+ esdhc_setbits32(®s->dllcfg0, DLL_ENABLE);
esdhc_setbits32(®s->tbctl, HS400_WNDW_ADJUST);
esdhc_clock_control(priv, false);
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [v4, 10/11] arm: dts: lx2160ardb: support eMMC HS400 mode
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
` (8 preceding siblings ...)
2020-09-01 8:58 ` [v4, 09/11] mmc: fsl_esdhc: fix eMMC HS400 stability issue Yangbo Lu
@ 2020-09-01 8:58 ` Yangbo Lu
2020-09-01 8:58 ` [v4, 11/11] configs: lx2160ardb: enable eMMC HS400 mode support Yangbo Lu
` (2 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:58 UTC (permalink / raw)
To: u-boot
Add properties related to eMMC HS400 mode.
mmc-hs400-1_8v;
bus-width = <8>;
They had been already in kernel dts file since the first
lx2160ardb dts patch.
b068890 arm64: dts: add LX2160ARDB board support
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
- None.
Changes for v3:
- Explained more in commit message.
Changes for v4:
- None.
---
arch/arm/dts/fsl-lx2160a-rdb.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
index d787778..5fbdd90 100644
--- a/arch/arm/dts/fsl-lx2160a-rdb.dts
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -80,6 +80,8 @@
&esdhc1 {
status = "okay";
mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ bus-width = <8>;
};
&fspi {
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [v4, 11/11] configs: lx2160ardb: enable eMMC HS400 mode support
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
` (9 preceding siblings ...)
2020-09-01 8:58 ` [v4, 10/11] arm: dts: lx2160ardb: support eMMC HS400 mode Yangbo Lu
@ 2020-09-01 8:58 ` Yangbo Lu
2020-09-07 3:19 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Y.b. Lu
2020-09-10 5:50 ` Jaehoon Chung
12 siblings, 0 replies; 17+ messages in thread
From: Yangbo Lu @ 2020-09-01 8:58 UTC (permalink / raw)
To: u-boot
Enable eMMC HS400 mode support on LX2160ARDB.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
- None.
Changes for v3:
- None.
Changes for v4:
- None.
---
configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/lx2160ardb_tfa_defconfig | 1 +
configs/lx2160ardb_tfa_stmm_defconfig | 1 +
3 files changed, 3 insertions(+)
diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index 5e30890..159ae9d 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -41,6 +41,7 @@ CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0
CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index 7021223..8a4e6ef 100644
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -48,6 +48,7 @@ CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0
CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/lx2160ardb_tfa_stmm_defconfig b/configs/lx2160ardb_tfa_stmm_defconfig
index b0dc3c0..bd9c1e9 100644
--- a/configs/lx2160ardb_tfa_stmm_defconfig
+++ b/configs/lx2160ardb_tfa_stmm_defconfig
@@ -49,6 +49,7 @@ CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_DEFAULT_BUS_NUMBER=0
CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
` (10 preceding siblings ...)
2020-09-01 8:58 ` [v4, 11/11] configs: lx2160ardb: enable eMMC HS400 mode support Yangbo Lu
@ 2020-09-07 3:19 ` Y.b. Lu
2020-09-07 7:21 ` Jaehoon Chung
2020-09-08 1:08 ` Peng Fan
2020-09-10 5:50 ` Jaehoon Chung
12 siblings, 2 replies; 17+ messages in thread
From: Y.b. Lu @ 2020-09-07 3:19 UTC (permalink / raw)
To: u-boot
Hi Jaehoon and Peng,
Any comments on the v4 patch-set?
Thank you.
Best regards,
Yangbo Lu
> -----Original Message-----
> From: Yangbo Lu <yangbo.lu@nxp.com>
> Sent: Tuesday, September 1, 2020 4:58 PM
> To: u-boot at lists.denx.de; Peng Fan <peng.fan@nxp.com>; Priyanka Jain
> <priyanka.jain@nxp.com>; 'Jaehoon Chung' <jh80.chung@samsung.com>
> Cc: Y.b. Lu <yangbo.lu@nxp.com>
> Subject: [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
>
> This patch-set is to support eMMC HS200 and HS400 speed modes for
> eSDHC, and enable them on LX2160ARDB board.
>
> CI build link
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Ftravis-ci
> .org%2Fgithub%2Fyangbolu1991%2Fu-boot-test%2Fbuilds%2F720875619&a
> mp;data=02%7C01%7Cyangbo.lu%40nxp.com%7Caf6b8adab90444f93e1208d
> 84e563a07%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637345
> 479527036436&sdata=L26QnuiL3ETvLbr4P1oJqxVJAoVlYY3ROg%2FWpb
> J%2B6cc%3D&reserved=0
>
> Changes for v2:
> - Added two patches to fix stability issue.
> Changes for v3:
> - Explained more in commit messages.
> - Added HS400 exit code for downgrade.
> Changes for v4:
> - Checked returning of mmc_hs400_prepare_ddr().
> - Added Reviewed-by.
> - Rebased.
>
> Yangbo Lu (11):
> mmc: add a reinit() API
> mmc: fsl_esdhc: add a reinit() callback
> mmc: fsl_esdhc: support tuning for eMMC HS200
> mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
> mmc: add a hs400_tuning flag
> mmc: add a mmc_hs400_prepare_ddr() interface
> mmc: fsl_esdhc: support eMMC HS400 mode
> mmc: fsl_esdhc: fix mmc->clock with actual clock
> mmc: fsl_esdhc: fix eMMC HS400 stability issue
> arm: dts: lx2160ardb: support eMMC HS400 mode
> configs: lx2160ardb: enable eMMC HS400 mode support
>
> arch/arm/dts/fsl-lx2160a-rdb.dts | 2 +
> configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
> configs/lx2160ardb_tfa_defconfig | 1 +
> configs/lx2160ardb_tfa_stmm_defconfig | 1 +
> drivers/mmc/fsl_esdhc.c | 176
> ++++++++++++++++++++++++++-
> drivers/mmc/mmc-uclass.c | 30 +++++
> drivers/mmc/mmc.c | 14 ++-
> include/fsl_esdhc.h | 29 ++++-
> include/mmc.h | 26 +++-
> 9 files changed, 270 insertions(+), 10 deletions(-)
>
> --
> 2.7.4
^ permalink raw reply [flat|nested] 17+ messages in thread
* [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
2020-09-07 3:19 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Y.b. Lu
@ 2020-09-07 7:21 ` Jaehoon Chung
2020-09-08 1:08 ` Peng Fan
1 sibling, 0 replies; 17+ messages in thread
From: Jaehoon Chung @ 2020-09-07 7:21 UTC (permalink / raw)
To: u-boot
On 9/7/20 12:19 PM, Y.b. Lu wrote:
> Hi Jaehoon and Peng,
>
> Any comments on the v4 patch-set?
Will check. Thanks!
Best Regards,
Jaehoon Chung
> Thank you.
>
> Best regards,
> Yangbo Lu
>
>> -----Original Message-----
>> From: Yangbo Lu <yangbo.lu@nxp.com>
>> Sent: Tuesday, September 1, 2020 4:58 PM
>> To: u-boot at lists.denx.de; Peng Fan <peng.fan@nxp.com>; Priyanka Jain
>> <priyanka.jain@nxp.com>; 'Jaehoon Chung' <jh80.chung@samsung.com>
>> Cc: Y.b. Lu <yangbo.lu@nxp.com>
>> Subject: [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
>>
>> This patch-set is to support eMMC HS200 and HS400 speed modes for
>> eSDHC, and enable them on LX2160ARDB board.
>>
>> CI build link
>> https://protect2.fireeye.com/v1/url?k=b4e11c14-e97d1d74-b4e0975b-0cc47a31307c-17ee447490c8297d&q=1&e=facc8ec9-f5b1-4cdf-bad5-baf7c2c5035b&u=https%3A%2F%2Feur01.safelinks.protection.outlook.com%2F%3Furl%3Dhttps%253A%252F%252Ftravis-ci
>> .org%2Fgithub%2Fyangbolu1991%2Fu-boot-test%2Fbuilds%2F720875619&a
>> mp;data=02%7C01%7Cyangbo.lu%40nxp.com%7Caf6b8adab90444f93e1208d
>> 84e563a07%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637345
>> 479527036436&sdata=L26QnuiL3ETvLbr4P1oJqxVJAoVlYY3ROg%2FWpb
>> J%2B6cc%3D&reserved=0
>>
>> Changes for v2:
>> - Added two patches to fix stability issue.
>> Changes for v3:
>> - Explained more in commit messages.
>> - Added HS400 exit code for downgrade.
>> Changes for v4:
>> - Checked returning of mmc_hs400_prepare_ddr().
>> - Added Reviewed-by.
>> - Rebased.
>>
>> Yangbo Lu (11):
>> mmc: add a reinit() API
>> mmc: fsl_esdhc: add a reinit() callback
>> mmc: fsl_esdhc: support tuning for eMMC HS200
>> mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
>> mmc: add a hs400_tuning flag
>> mmc: add a mmc_hs400_prepare_ddr() interface
>> mmc: fsl_esdhc: support eMMC HS400 mode
>> mmc: fsl_esdhc: fix mmc->clock with actual clock
>> mmc: fsl_esdhc: fix eMMC HS400 stability issue
>> arm: dts: lx2160ardb: support eMMC HS400 mode
>> configs: lx2160ardb: enable eMMC HS400 mode support
>>
>> arch/arm/dts/fsl-lx2160a-rdb.dts | 2 +
>> configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
>> configs/lx2160ardb_tfa_defconfig | 1 +
>> configs/lx2160ardb_tfa_stmm_defconfig | 1 +
>> drivers/mmc/fsl_esdhc.c | 176
>> ++++++++++++++++++++++++++-
>> drivers/mmc/mmc-uclass.c | 30 +++++
>> drivers/mmc/mmc.c | 14 ++-
>> include/fsl_esdhc.h | 29 ++++-
>> include/mmc.h | 26 +++-
>> 9 files changed, 270 insertions(+), 10 deletions(-)
>>
>> --
>> 2.7.4
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
2020-09-07 3:19 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Y.b. Lu
2020-09-07 7:21 ` Jaehoon Chung
@ 2020-09-08 1:08 ` Peng Fan
2020-09-08 7:17 ` Stefan Roese
1 sibling, 1 reply; 17+ messages in thread
From: Peng Fan @ 2020-09-08 1:08 UTC (permalink / raw)
To: u-boot
Hi Y.b
> Subject: RE: [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
>
> Hi Jaehoon and Peng,
>
> Any comments on the v4 patch-set?
Sorry for late. I need postpone the pick up this patchset until next.
I'll give a check, if no issues, I'll pick this into next branch.
Thanks,
Peng.
> Thank you.
>
> Best regards,
> Yangbo Lu
>
> > -----Original Message-----
> > From: Yangbo Lu <yangbo.lu@nxp.com>
> > Sent: Tuesday, September 1, 2020 4:58 PM
> > To: u-boot at lists.denx.de; Peng Fan <peng.fan@nxp.com>; Priyanka Jain
> > <priyanka.jain@nxp.com>; 'Jaehoon Chung' <jh80.chung@samsung.com>
> > Cc: Y.b. Lu <yangbo.lu@nxp.com>
> > Subject: [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
> >
> > This patch-set is to support eMMC HS200 and HS400 speed modes for
> > eSDHC, and enable them on LX2160ARDB board.
> >
> > CI build link
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Ftrav
> > is-ci
> > .org%2Fgithub%2Fyangbolu1991%2Fu-boot-test%2Fbuilds%2F720875619&
> a
> >
> mp;data=02%7C01%7Cyangbo.lu%40nxp.com%7Caf6b8adab90444f93e1208
> d
> >
> 84e563a07%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637345
> >
> 479527036436&sdata=L26QnuiL3ETvLbr4P1oJqxVJAoVlYY3ROg%2FWpb
> > J%2B6cc%3D&reserved=0
> >
> > Changes for v2:
> > - Added two patches to fix stability issue.
> > Changes for v3:
> > - Explained more in commit messages.
> > - Added HS400 exit code for downgrade.
> > Changes for v4:
> > - Checked returning of mmc_hs400_prepare_ddr().
> > - Added Reviewed-by.
> > - Rebased.
> >
> > Yangbo Lu (11):
> > mmc: add a reinit() API
> > mmc: fsl_esdhc: add a reinit() callback
> > mmc: fsl_esdhc: support tuning for eMMC HS200
> > mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
> > mmc: add a hs400_tuning flag
> > mmc: add a mmc_hs400_prepare_ddr() interface
> > mmc: fsl_esdhc: support eMMC HS400 mode
> > mmc: fsl_esdhc: fix mmc->clock with actual clock
> > mmc: fsl_esdhc: fix eMMC HS400 stability issue
> > arm: dts: lx2160ardb: support eMMC HS400 mode
> > configs: lx2160ardb: enable eMMC HS400 mode support
> >
> > arch/arm/dts/fsl-lx2160a-rdb.dts | 2 +
> > configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
> > configs/lx2160ardb_tfa_defconfig | 1 +
> > configs/lx2160ardb_tfa_stmm_defconfig | 1 +
> > drivers/mmc/fsl_esdhc.c | 176
> > ++++++++++++++++++++++++++-
> > drivers/mmc/mmc-uclass.c | 30 +++++
> > drivers/mmc/mmc.c | 14 ++-
> > include/fsl_esdhc.h | 29 ++++-
> > include/mmc.h | 26 +++-
> > 9 files changed, 270 insertions(+), 10 deletions(-)
> >
> > --
> > 2.7.4
^ permalink raw reply [flat|nested] 17+ messages in thread
* [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
2020-09-08 1:08 ` Peng Fan
@ 2020-09-08 7:17 ` Stefan Roese
0 siblings, 0 replies; 17+ messages in thread
From: Stefan Roese @ 2020-09-08 7:17 UTC (permalink / raw)
To: u-boot
Hi All,
On 08.09.20 03:08, Peng Fan wrote:
> Hi Y.b
>
>> Subject: RE: [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
>>
>> Hi Jaehoon and Peng,
>>
>> Any comments on the v4 patch-set?
>
> Sorry for late. I need postpone the pick up this patchset until next.
> I'll give a check, if no issues, I'll pick this into next branch.
I've tested it on the LX2160A-RDB and it the speed improvement is
quite impressive. Thanks for working on this.
Tested-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
> Thanks,
> Peng.
>
>> Thank you.
>>
>> Best regards,
>> Yangbo Lu
>>
>>> -----Original Message-----
>>> From: Yangbo Lu <yangbo.lu@nxp.com>
>>> Sent: Tuesday, September 1, 2020 4:58 PM
>>> To: u-boot at lists.denx.de; Peng Fan <peng.fan@nxp.com>; Priyanka Jain
>>> <priyanka.jain@nxp.com>; 'Jaehoon Chung' <jh80.chung@samsung.com>
>>> Cc: Y.b. Lu <yangbo.lu@nxp.com>
>>> Subject: [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
>>>
>>> This patch-set is to support eMMC HS200 and HS400 speed modes for
>>> eSDHC, and enable them on LX2160ARDB board.
>>>
>>> CI build link
>>> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Ftrav
>>> is-ci
>>> .org%2Fgithub%2Fyangbolu1991%2Fu-boot-test%2Fbuilds%2F720875619&
>> a
>>>
>> mp;data=02%7C01%7Cyangbo.lu%40nxp.com%7Caf6b8adab90444f93e1208
>> d
>>>
>> 84e563a07%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637345
>>>
>> 479527036436&sdata=L26QnuiL3ETvLbr4P1oJqxVJAoVlYY3ROg%2FWpb
>>> J%2B6cc%3D&reserved=0
>>>
>>> Changes for v2:
>>> - Added two patches to fix stability issue.
>>> Changes for v3:
>>> - Explained more in commit messages.
>>> - Added HS400 exit code for downgrade.
>>> Changes for v4:
>>> - Checked returning of mmc_hs400_prepare_ddr().
>>> - Added Reviewed-by.
>>> - Rebased.
>>>
>>> Yangbo Lu (11):
>>> mmc: add a reinit() API
>>> mmc: fsl_esdhc: add a reinit() callback
>>> mmc: fsl_esdhc: support tuning for eMMC HS200
>>> mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
>>> mmc: add a hs400_tuning flag
>>> mmc: add a mmc_hs400_prepare_ddr() interface
>>> mmc: fsl_esdhc: support eMMC HS400 mode
>>> mmc: fsl_esdhc: fix mmc->clock with actual clock
>>> mmc: fsl_esdhc: fix eMMC HS400 stability issue
>>> arm: dts: lx2160ardb: support eMMC HS400 mode
>>> configs: lx2160ardb: enable eMMC HS400 mode support
>>>
>>> arch/arm/dts/fsl-lx2160a-rdb.dts | 2 +
>>> configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
>>> configs/lx2160ardb_tfa_defconfig | 1 +
>>> configs/lx2160ardb_tfa_stmm_defconfig | 1 +
>>> drivers/mmc/fsl_esdhc.c | 176
>>> ++++++++++++++++++++++++++-
>>> drivers/mmc/mmc-uclass.c | 30 +++++
>>> drivers/mmc/mmc.c | 14 ++-
>>> include/fsl_esdhc.h | 29 ++++-
>>> include/mmc.h | 26 +++-
>>> 9 files changed, 270 insertions(+), 10 deletions(-)
>>>
>>> --
>>> 2.7.4
>
Viele Gr??e,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
^ permalink raw reply [flat|nested] 17+ messages in thread
* [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
` (11 preceding siblings ...)
2020-09-07 3:19 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Y.b. Lu
@ 2020-09-10 5:50 ` Jaehoon Chung
12 siblings, 0 replies; 17+ messages in thread
From: Jaehoon Chung @ 2020-09-10 5:50 UTC (permalink / raw)
To: u-boot
Hi,
On 9/1/20 5:57 PM, Yangbo Lu wrote:
> This patch-set is to support eMMC HS200 and HS400 speed modes for
> eSDHC, and enable them on LX2160ARDB board.
looks good to me.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Best Regards,
Jaehoon Chung
>
> CI build link
> https://travis-ci.org/github/yangbolu1991/u-boot-test/builds/720875619
>
> Changes for v2:
> - Added two patches to fix stability issue.
> Changes for v3:
> - Explained more in commit messages.
> - Added HS400 exit code for downgrade.
> Changes for v4:
> - Checked returning of mmc_hs400_prepare_ddr().
> - Added Reviewed-by.
> - Rebased.
>
> Yangbo Lu (11):
> mmc: add a reinit() API
> mmc: fsl_esdhc: add a reinit() callback
> mmc: fsl_esdhc: support tuning for eMMC HS200
> mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init
> mmc: add a hs400_tuning flag
> mmc: add a mmc_hs400_prepare_ddr() interface
> mmc: fsl_esdhc: support eMMC HS400 mode
> mmc: fsl_esdhc: fix mmc->clock with actual clock
> mmc: fsl_esdhc: fix eMMC HS400 stability issue
> arm: dts: lx2160ardb: support eMMC HS400 mode
> configs: lx2160ardb: enable eMMC HS400 mode support
>
> arch/arm/dts/fsl-lx2160a-rdb.dts | 2 +
> configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
> configs/lx2160ardb_tfa_defconfig | 1 +
> configs/lx2160ardb_tfa_stmm_defconfig | 1 +
> drivers/mmc/fsl_esdhc.c | 176 ++++++++++++++++++++++++++-
> drivers/mmc/mmc-uclass.c | 30 +++++
> drivers/mmc/mmc.c | 14 ++-
> include/fsl_esdhc.h | 29 ++++-
> include/mmc.h | 26 +++-
> 9 files changed, 270 insertions(+), 10 deletions(-)
>
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2020-09-10 5:50 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20200901090556epcas1p46358a60233c9465e6900ffb0819c9e62@epcas1p4.samsung.com>
2020-09-01 8:57 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Yangbo Lu
2020-09-01 8:57 ` [v4, 01/11] mmc: add a reinit() API Yangbo Lu
2020-09-01 8:58 ` [v4, 02/11] mmc: fsl_esdhc: add a reinit() callback Yangbo Lu
2020-09-01 8:58 ` [v4, 03/11] mmc: fsl_esdhc: support tuning for eMMC HS200 Yangbo Lu
2020-09-01 8:58 ` [v4, 04/11] mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init Yangbo Lu
2020-09-01 8:58 ` [v4, 05/11] mmc: add a hs400_tuning flag Yangbo Lu
2020-09-01 8:58 ` [v4, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface Yangbo Lu
2020-09-01 8:58 ` [v4, 07/11] mmc: fsl_esdhc: support eMMC HS400 mode Yangbo Lu
2020-09-01 8:58 ` [v4, 08/11] mmc: fsl_esdhc: fix mmc->clock with actual clock Yangbo Lu
2020-09-01 8:58 ` [v4, 09/11] mmc: fsl_esdhc: fix eMMC HS400 stability issue Yangbo Lu
2020-09-01 8:58 ` [v4, 10/11] arm: dts: lx2160ardb: support eMMC HS400 mode Yangbo Lu
2020-09-01 8:58 ` [v4, 11/11] configs: lx2160ardb: enable eMMC HS400 mode support Yangbo Lu
2020-09-07 3:19 ` [v4, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes Y.b. Lu
2020-09-07 7:21 ` Jaehoon Chung
2020-09-08 1:08 ` Peng Fan
2020-09-08 7:17 ` Stefan Roese
2020-09-10 5:50 ` Jaehoon Chung
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.