* Fusion HDTV Dual Digital Express - NSW Australia
@ 2009-09-07 3:45 Alex Ferrara
2009-09-07 11:52 ` Vincent McIntyre
0 siblings, 1 reply; 4+ messages in thread
From: Alex Ferrara @ 2009-09-07 3:45 UTC (permalink / raw)
To: linux-media
I bought several of these cards over a year ago thinking that they
worked under Linux, but I found that while the cards seem to work
flawlessly for some people, in some geographic locations, they don't
work for me in Goulburn NSW pointing to Mt Gray.
I have a mythtv backend with 2 x Dvico Dual Digital 4 PCI cards and
they are working perfectly, but the Dual Express cards will not tune
all transports. It seems that Prime and TEN hardly get enough signal
to tune.
I have done some tests, and under Windows with MCE the cards work
perfectly using the same antenna
I've heard that these cards have some sort of pre-amp that isn't
getting turned on in Linux. This might be part of the issue. I have
tried increasing signal amplification, but that degrades the other
signals that are working ok without the extra amp.
If anyone can shed some light, I would be very appreciative
aF
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Fusion HDTV Dual Digital Express - NSW Australia
2009-09-07 3:45 Fusion HDTV Dual Digital Express - NSW Australia Alex Ferrara
@ 2009-09-07 11:52 ` Vincent McIntyre
2009-09-07 17:32 ` Alex Ferrara
2009-09-07 17:34 ` Alex Ferrara
0 siblings, 2 replies; 4+ messages in thread
From: Vincent McIntyre @ 2009-09-07 11:52 UTC (permalink / raw)
To: Alex Ferrara; +Cc: linux-media
I have some issues with what I think is the same card, I'm in Sydney,
using mythtv.
I also have the DViCo Fusion Dual Digital 4 rev 1. (setup details at the end)
At first when I scanned I could not get the SBS HD transport.
Sometime between 28 Jun and 19 July I stopped being able to tune
anything from channel 9 as well. This does not appear to have been
triggered by a v4l code change, I did not
pull from the tree in that time frame.
The symptom I see when it "fails" is that mythv reports some signal,
but it fails to get lock.
When I try to rescan, I get weird errors - after mythtv-backend stops,
I start getting USB errors of this kind:
kernel: [ 663.703978] dvb-usb: recv bulk message failed: -110
kernel: [ 663.703994] zl10353: write to reg 62 failed (err = -121)!
kernel: [ 664.836658] dvb-usb: recv bulk message failed: -110
kernel: [ 664.836665] zl10353: write to reg 62 failed (err = -121)!
kernel: [ 665.699864] dvb-usb: bulk message failed: -110 (4/0)
kernel: [ 665.699869] cxusb: i2c read failed
kernel: [ 666.832545] dvb-usb: bulk message failed: -110 (5/0)
kernel: [ 666.832551] zl10353: write to reg 50 failed (err = -121)!
kernel: [ 667.696001] dvb-usb: bulk message failed: -110 (5/0)
kernel: [ 667.696016] zl10353: write to reg 50 failed (err = -121)!
kernel: [ 668.828433] dvb-usb: bulk message failed: -110 (2/0)
kernel: [ 669.691639] dvb-usb: bulk message failed: -110 (4/0)
At this point, the channel scan stalls out and the machine is very
sluggish because of the DoSing of the USB bus. To recover I have to
halt the machine and bring it up again.
It's unclear to me if it is a problem with the Dual DIgital 4 or the
Dual Digital Express.
This appears to be a longstanding issue, existing from 2.6.26 (my
kernel) through to 2.6.30 (see
http://www.spinics.net/lists/linux-media/msg08244.html)
I attempted to avoid the power cycling of the card by loading the
tuner module with
options tuner_xc2028 no_poweroff=1
in /etc/modprobe.d/options, but with this option turned on I was
unable to receive any stations.
Alex, just to confirm we have the same card could you post the PCI IDs?
When the card is detected I see in syslog:
kernel: [ 57.768535] CORE cx23885[0]: subsystem: 18ac:db78, board:
DViCO FusionHDTV DVB-T Dual Express [card=11,autodetected]
and lspci gives me
(lspci -n -s 04:00 && lspci -v -s 04:00)
(sudo lspci -n -s 4:00 && sudo lspci -v -s 4:00; )
04:00.0 0400: 14f1:8852 (rev 02)
04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
PCI Video and Audio Decoder (rev 02)
Subsystem: DViCO Corporation FusionHDTV DVB-T Dual Express
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at 90000000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express Endpoint IRQ 0
Capabilities: [80] Power Management version 2
Capabilities: [90] Vital Product Data
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
My system details:
(cd ~/v4l; hg identify)
2b49813f8482 tip
/etc/issue
Ubuntu 8.04.3 LTS
uname -a
2.6.24-24-generic #1 SMP Tue Aug 18 17:04:53 UTC 2009 i686 GNU/Linux
lspci
00:00.0 0600: 8086:29c0 (rev 02)
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller (rev 02)
00:02.0 0300: 8086:29c2 (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express
Integrated Graphics Controller (rev 02)
00:03.0 0780: 8086:29c4 (rev 02)
00:03.0 Communication controller: Intel Corporation 82G33/G31/P35/P31
Express MEI Controller (rev 02)
00:19.0 0200: 8086:294c (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit
Network Connection (rev 02)
00:1a.0 0c03: 8086:2937 (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #4 (rev 02)
00:1a.1 0c03: 8086:2938 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #5 (rev 02)
00:1a.2 0c03: 8086:2939 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #6 (rev 02)
00:1a.7 0c03: 8086:293c (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
EHCI Controller #2 (rev 02)
00:1b.0 0403: 8086:293e (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 02)
00:1c.0 0604: 8086:2940 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 (rev 02)
00:1c.1 0604: 8086:2942 (rev 02)
00:1c.2 0604: 8086:2944 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 (rev 02)
00:1c.3 0604: 8086:2946 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 (rev 02)
00:1c.4 0604: 8086:2948 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 (rev 02)
00:1d.0 0c03: 8086:2934 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #1 (rev 02)
00:1d.1 0c03: 8086:2935 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #2 (rev 02)
00:1d.2 0c03: 8086:2936 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #3 (rev 02)
00:1d.7 0c03: 8086:293a (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
EHCI Controller #1 (rev 02)
00:1e.0 0604: 8086:244e (rev 92)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 0601: 8086:2912 (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801IH (ICH9DH) LPC Interface
Controller (rev 02)
00:1f.2 0106: 8086:2922 (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH)
6 port SATA AHCI Controller (rev 02)
00:1f.3 0c05: 8086:2930 (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
02:00.0 0101: 11ab:6101 (rev b2)
02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101
single-port PATA133 interface (rev b2)
04:00.0 0400: 14f1:8852 (rev 02)
04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
PCI Video and Audio Decoder (rev 02)
06:00.0 0200: 10ec:8185 (rev 20)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185
IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
06:01.0 0c03: 1106:3038 (rev 61)
06:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 61)
06:01.1 0c03: 1106:3038 (rev 61)
06:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 61)
06:01.2 0c03: 1106:3104 (rev 63)
06:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
06:03.0 0c00: 104c:8023
06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
lsusb
00:1f.3 0c05: 8086:2930 (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
02:00.0 0101: 11ab:6101 (rev b2)
02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101
single-port PATA133 interface (rev b2)
04:00.0 0400: 14f1:8852 (rev 02)
04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
PCI Video and Audio Decoder (rev 02)
06:00.0 0200: 10ec:8185 (rev 20)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185
IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
06:01.0 0c03: 1106:3038 (rev 61)
06:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 61)
06:01.1 0c03: 1106:3038 (rev 61)
06:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 61)
06:01.2 0c03: 1106:3104 (rev 63)
06:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
06:03.0 0c00: 104c:8023
06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
On 9/7/09, Alex Ferrara <alex@receptiveit.com.au> wrote:
> I bought several of these cards over a year ago thinking that they
> worked under Linux, but I found that while the cards seem to work
> flawlessly for some people, in some geographic locations, they don't
> work for me in Goulburn NSW pointing to Mt Gray.
>
> I have a mythtv backend with 2 x Dvico Dual Digital 4 PCI cards and
> they are working perfectly, but the Dual Express cards will not tune
> all transports. It seems that Prime and TEN hardly get enough signal
> to tune.
>
> I have done some tests, and under Windows with MCE the cards work
> perfectly using the same antenna
>
> I've heard that these cards have some sort of pre-amp that isn't
> getting turned on in Linux. This might be part of the issue. I have
> tried increasing signal amplification, but that degrades the other
> signals that are working ok without the extra amp.
>
> If anyone can shed some light, I would be very appreciative
>
> aF
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Fusion HDTV Dual Digital Express - NSW Australia
2009-09-07 11:52 ` Vincent McIntyre
@ 2009-09-07 17:32 ` Alex Ferrara
2009-09-07 17:34 ` Alex Ferrara
1 sibling, 0 replies; 4+ messages in thread
From: Alex Ferrara @ 2009-09-07 17:32 UTC (permalink / raw)
To: Vincent McIntyre; +Cc: linux-media
I probably should elaborate a little.
I have two mythtv servers, one is in production with the two Dual
Digital 4 PCI cards. I believe they are v2, and tht machine is running
perfectly.
> cat /etc/issue
Ubuntu 8.10
> uname -a
Linux kaylee 2.6.27-8-server #1 SMP Thu Nov 6 18:18:16 UTC 2008 x86_64
GNU/Linux
> lsusb
Bus 013 Device 003: ID 0fe9:db98 DVICO
Bus 013 Device 002: ID 0fe9:db98 DVICO
Bus 013 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 012 Device 003: ID 0fe9:db98 DVICO
Bus 012 Device 002: ID 0fe9:db98 DVICO
Bus 012 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Now I did have the PCIe cards in that machine at one stage, but they
played up sufficiently that I removed them and decided to revisit the
issue at a later date.
I have recently built a development mythtv machine. It was installed
with Ubuntu 9.04 but I have updated to the development tree of Ubuntu
9.10 to preview Mythtv 0.22, which looks quite nice I might add.
My dev mythtv machine has the following
>cat /etc/issue
Ubuntu karmic (development branch)
>uname -a
Linux poseidon 2.6.31-9-server #29-Ubuntu SMP Sun Aug 30 18:37:42 UTC
2009 x86_64 GNU/Linux
>lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM
Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset
Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation 4 Series Chipset
Integrated Graphics Controller (rev 03)
00:03.0 Communication controller: Intel Corporation 4 Series Chipset
HECI Controller (rev 03)
00:19.0 Ethernet controller: Intel Corporation 82567V-2 Gigabit
Network Connection
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 1
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 3
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 4
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface
Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA
AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
PCI Video and Audio Decoder (rev 02)
03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
04:06.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 70)
dmesg extract
[ 10.010084] Linux video capture interface: v2.00
[ 10.041692] cx23885 driver version 0.0.2 loaded
[ 10.041863] cx23885 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -
> IRQ 18
[ 10.041913] CORE cx23885[0]: subsystem: 18ac:db78, board: DViCO
FusionHDTV DVB-T Dual Express [card=11,autodetected]
> lspci -n -s 02:00 && lspci -v -s 02:00
02:00.0 0400: 14f1:8852 (rev 02)
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
PCI Video and Audio Decoder (rev 02)
Subsystem: DViCO Corporation Device db78
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d0400000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [80] Power Management version 2
Capabilities: [90] Vital Product Data <?>
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [200] Virtual Channel <?>
Kernel driver in use: cx23885
Kernel modules: cx23885
I am using the v4l stuff included in Ubuntu 9.10 Dev and I have
extacted the necessary firmware using Steven Toths method
(extract_xc3028.pl on HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip)
I think the issue is in the firmware, as the frontends seem to behave
correctly.
I have created the initial scanning data for my area
# Australia / Goulburn / Rocky Hill
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval
hierarchy
# ABC
T 725500000 7MHz 3/4 3/4 QAM64 8k 1/16 NONE
# SBS
T 746500000 7MHz 2/3 2/3 QAM64 8k 1/8 NONE
# WIN
T 767500000 7MHz 3/4 3/4 QAM64 8k 1/16 NONE
# Prime
T 788500000 7MHz 3/4 3/4 QAM64 8k 1/16 NONE
# TEN
T 809500000 7MHz 3/4 3/4 QAM64 8k 1/16 NONE
but when I manually scan using this transport data, some channels fail.
>scan au-Goulburn
scanning au-Goulburn
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 725500000 1 3 3 3 1 1 0
initial transponder 746500000 1 2 2 3 1 2 0
initial transponder 767500000 1 3 3 3 1 1 0
initial transponder 788500000 1 3 3 3 1 1 0
initial transponder 809500000 1 3 3 3 1 1 0
>>> tune to:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
0x0000 0x02a0: pmt_pid 0x0000 ABC -- ABC HDTV (running)
0x0000 0x02a1: pmt_pid 0x0000 ABC -- ABC1 (running)
0x0000 0x02a2: pmt_pid 0x0000 ABC -- ABC2 (running)
0x0000 0x02a3: pmt_pid 0x0000 ABC -- ABC1 (running)
0x0000 0x02a4: pmt_pid 0x0000 ABC -- ABC3 (running)
0x0000 0x02a6: pmt_pid 0x0000 ABC -- ABC DiG Radio (running)
0x0000 0x02a7: pmt_pid 0x0000 ABC -- ABC DiG Jazz (running)
Network Name 'ABC NSW'
>>> tune to:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
0x0000 0x0351: pmt_pid 0x0401 SBS -- SBS ONE (running)
0x0000 0x0355: pmt_pid 0x0400 SBS -- SBS HD (running)
0x0000 0x0352: pmt_pid 0x0402 SBS -- SBS TWO (running)
0x0000 0x0353: pmt_pid 0x0408 SBS -- SBS 3 (running)
0x0000 0x0354: pmt_pid 0x0409 SBS -- SBS 4 (running)
0x0000 0x035e: pmt_pid 0x0403 SBS -- SBS Radio 1 (running)
0x0000 0x035f: pmt_pid 0x0404 SBS -- SBS Radio 2 (running)
Network Name 'SBS NSW'
>>> tune to:
767500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
Network Name 'WIN Digital'
WARNING: filter timeout pid 0x0031
>>> tune to:
788500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
Network Name 'PRIME'
WARNING: filter timeout pid 0x0011
>>> tune to:
809500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
0x0000 0x0807: pmt_pid 0x0160 Southern Cross Television -- SC10
Canberra (running)
0x0000 0x0827: pmt_pid 0x06ae Southern Cross Television -- One HD
Canberra (running)
0x0000 0x0847: pmt_pid 0x06b8 Southern Cross Television -- SC Ten
(running)
Network Name 'Southern Cross Television'
>>> tune to:
226500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
226500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
retrying with f=648500000
>>> tune to:
648500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
648500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
retrying with f=781500000
>>> tune to:
781500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
781500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
retrying with f=774500000
>>> tune to:
774500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
774500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
retrying with f=634500000
>>> tune to:
634500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
634500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
543500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
543500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
retrying with f=711625000
>>> tune to:
711625000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
711625000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
retrying with f=599500000
>>> tune to:
599500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
599500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
219500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
219500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
177500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
177500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_1_2
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
dumping lists (25 services)
ABC HDTV:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
516:0:672
ABC1
:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
512:650:673
ABC2
:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
513:651:674
ABC1
:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
512:650:675
ABC3
:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
512:650:676
ABC DiG Radio:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
0:690:678
ABC DiG Jazz:
725500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
0:700:679
SBS ONE:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
161:81:849
SBS TWO:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
162:83:850
SBS
3
:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
161:81:851
SBS
4
:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
161:81:852
SBS HD:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
102:103:853
SBS Radio
1
:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
0:201:862
SBS Radio
2
:
746500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3
:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:
0:202:863
[0001]:
767500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:33:36:1
[000a]:
767500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:129:0:10
[0002]:
767500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:0:2
[0946]:
788500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
2740:2741:2374
[0960]:
788500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
2740:2741:2400
[0961]:
788500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
2740:2741:2401
[0962]:
788500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
2740:2741:2402
[0963]:
788500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
2740:2741:2403
SC10 Canberra:
809500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
353:354:2055
One HD Canberra:
809500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
1711:0:2087
SC Ten:
809500000
:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4
:FEC_3_4
:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:
353:354:2119
Done.
Doing the same procedure using the Dual Digital 4 on the other machine
works perfectly.
I have also dual-booted a machine about a year ago with Linux/Windows
XP media centre. Under media centre the card worked perfectly, and
under linux, it displayed the same behaviour I now see. This would
appear to rule out RF rig issues and weak signal. When I performed
these tests, I could see the antenna directly pointing to the TV
tower, which I could also visually see.
Since this seems to be an obscure problem, I'm not sure that there is
enough critical mass to fix it.
aF
On 07/09/2009, at 9:52 PM, Vincent McIntyre wrote:
> I have some issues with what I think is the same card, I'm in Sydney,
> using mythtv.
> I also have the DViCo Fusion Dual Digital 4 rev 1. (setup details at
> the end)
>
> At first when I scanned I could not get the SBS HD transport.
> Sometime between 28 Jun and 19 July I stopped being able to tune
> anything from channel 9 as well. This does not appear to have been
> triggered by a v4l code change, I did not
> pull from the tree in that time frame.
>
> The symptom I see when it "fails" is that mythv reports some signal,
> but it fails to get lock.
>
> When I try to rescan, I get weird errors - after mythtv-backend stops,
> I start getting USB errors of this kind:
>
> kernel: [ 663.703978] dvb-usb: recv bulk message failed: -110
> kernel: [ 663.703994] zl10353: write to reg 62 failed (err = -121)!
> kernel: [ 664.836658] dvb-usb: recv bulk message failed: -110
> kernel: [ 664.836665] zl10353: write to reg 62 failed (err = -121)!
> kernel: [ 665.699864] dvb-usb: bulk message failed: -110 (4/0)
> kernel: [ 665.699869] cxusb: i2c read failed
> kernel: [ 666.832545] dvb-usb: bulk message failed: -110 (5/0)
> kernel: [ 666.832551] zl10353: write to reg 50 failed (err = -121)!
> kernel: [ 667.696001] dvb-usb: bulk message failed: -110 (5/0)
> kernel: [ 667.696016] zl10353: write to reg 50 failed (err = -121)!
> kernel: [ 668.828433] dvb-usb: bulk message failed: -110 (2/0)
> kernel: [ 669.691639] dvb-usb: bulk message failed: -110 (4/0)
>
>
> At this point, the channel scan stalls out and the machine is very
> sluggish because of the DoSing of the USB bus. To recover I have to
> halt the machine and bring it up again.
> It's unclear to me if it is a problem with the Dual DIgital 4 or the
> Dual Digital Express.
>
> This appears to be a longstanding issue, existing from 2.6.26 (my
> kernel) through to 2.6.30 (see
> http://www.spinics.net/lists/linux-media/msg08244.html)
>
>
> I attempted to avoid the power cycling of the card by loading the
> tuner module with
> options tuner_xc2028 no_poweroff=1
> in /etc/modprobe.d/options, but with this option turned on I was
> unable to receive any stations.
>
> Alex, just to confirm we have the same card could you post the PCI
> IDs?
>
> When the card is detected I see in syslog:
> kernel: [ 57.768535] CORE cx23885[0]: subsystem: 18ac:db78, board:
> DViCO FusionHDTV DVB-T Dual Express [card=11,autodetected]
>
> and lspci gives me
> (lspci -n -s 04:00 && lspci -v -s 04:00)
> (sudo lspci -n -s 4:00 && sudo lspci -v -s 4:00; )
> 04:00.0 0400: 14f1:8852 (rev 02)
> 04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
> PCI Video and Audio Decoder (rev 02)
> Subsystem: DViCO Corporation FusionHDTV DVB-T Dual Express
> Flags: bus master, fast devsel, latency 0, IRQ 19
> Memory at 90000000 (64-bit, non-prefetchable) [size=2M]
> Capabilities: [40] Express Endpoint IRQ 0
> Capabilities: [80] Power Management version 2
> Capabilities: [90] Vital Product Data
> Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
>
>
> My system details:
> (cd ~/v4l; hg identify)
> 2b49813f8482 tip
>
> /etc/issue
> Ubuntu 8.04.3 LTS
>
> uname -a
> 2.6.24-24-generic #1 SMP Tue Aug 18 17:04:53 UTC 2009 i686 GNU/Linux
>
> lspci
> 00:00.0 0600: 8086:29c0 (rev 02)
> 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
> Controller (rev 02)
> 00:02.0 0300: 8086:29c2 (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express
> Integrated Graphics Controller (rev 02)
> 00:03.0 0780: 8086:29c4 (rev 02)
> 00:03.0 Communication controller: Intel Corporation 82G33/G31/P35/P31
> Express MEI Controller (rev 02)
> 00:19.0 0200: 8086:294c (rev 02)
> 00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit
> Network Connection (rev 02)
> 00:1a.0 0c03: 8086:2937 (rev 02)
> 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #4 (rev 02)
> 00:1a.1 0c03: 8086:2938 (rev 02)
> 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #5 (rev 02)
> 00:1a.2 0c03: 8086:2939 (rev 02)
> 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #6 (rev 02)
> 00:1a.7 0c03: 8086:293c (rev 02)
> 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
> EHCI Controller #2 (rev 02)
> 00:1b.0 0403: 8086:293e (rev 02)
> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
> Controller (rev 02)
> 00:1c.0 0604: 8086:2940 (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 1 (rev 02)
> 00:1c.1 0604: 8086:2942 (rev 02)
> 00:1c.2 0604: 8086:2944 (rev 02)
> 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 3 (rev 02)
> 00:1c.3 0604: 8086:2946 (rev 02)
> 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 4 (rev 02)
> 00:1c.4 0604: 8086:2948 (rev 02)
> 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 5 (rev 02)
> 00:1d.0 0c03: 8086:2934 (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #1 (rev 02)
> 00:1d.1 0c03: 8086:2935 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #2 (rev 02)
> 00:1d.2 0c03: 8086:2936 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #3 (rev 02)
> 00:1d.7 0c03: 8086:293a (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
> EHCI Controller #1 (rev 02)
> 00:1e.0 0604: 8086:244e (rev 92)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
> 00:1f.0 0601: 8086:2912 (rev 02)
> 00:1f.0 ISA bridge: Intel Corporation 82801IH (ICH9DH) LPC Interface
> Controller (rev 02)
> 00:1f.2 0106: 8086:2922 (rev 02)
> 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH)
> 6 port SATA AHCI Controller (rev 02)
> 00:1f.3 0c05: 8086:2930 (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus
> Controller (rev 02)
> 02:00.0 0101: 11ab:6101 (rev b2)
> 02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101
> single-port PATA133 interface (rev b2)
> 04:00.0 0400: 14f1:8852 (rev 02)
> 04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
> PCI Video and Audio Decoder (rev 02)
> 06:00.0 0200: 10ec:8185 (rev 20)
> 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185
> IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
> 06:01.0 0c03: 1106:3038 (rev 61)
> 06:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61)
> 06:01.1 0c03: 1106:3038 (rev 61)
> 06:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61)
> 06:01.2 0c03: 1106:3104 (rev 63)
> 06:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
> 06:03.0 0c00: 104c:8023
> 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
> IEEE-1394a-2000 Controller (PHY/Link)
>
> lsusb
> 00:1f.3 0c05: 8086:2930 (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus
> Controller (rev 02)
> 02:00.0 0101: 11ab:6101 (rev b2)
> 02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101
> single-port PATA133 interface (rev b2)
> 04:00.0 0400: 14f1:8852 (rev 02)
> 04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
> PCI Video and Audio Decoder (rev 02)
> 06:00.0 0200: 10ec:8185 (rev 20)
> 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185
> IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
> 06:01.0 0c03: 1106:3038 (rev 61)
> 06:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61)
> 06:01.1 0c03: 1106:3038 (rev 61)
> 06:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61)
> 06:01.2 0c03: 1106:3104 (rev 63)
> 06:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
> 06:03.0 0c00: 104c:8023
> 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
> IEEE-1394a-2000 Controller (PHY/Link)
>
>
>
> On 9/7/09, Alex Ferrara <alex@receptiveit.com.au> wrote:
>> I bought several of these cards over a year ago thinking that they
>> worked under Linux, but I found that while the cards seem to work
>> flawlessly for some people, in some geographic locations, they don't
>> work for me in Goulburn NSW pointing to Mt Gray.
>>
>> I have a mythtv backend with 2 x Dvico Dual Digital 4 PCI cards and
>> they are working perfectly, but the Dual Express cards will not tune
>> all transports. It seems that Prime and TEN hardly get enough signal
>> to tune.
>>
>> I have done some tests, and under Windows with MCE the cards work
>> perfectly using the same antenna
>>
>> I've heard that these cards have some sort of pre-amp that isn't
>> getting turned on in Linux. This might be part of the issue. I have
>> tried increasing signal amplification, but that degrades the other
>> signals that are working ok without the extra amp.
>>
>> If anyone can shed some light, I would be very appreciative
>>
>> aF
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-
>> media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Fusion HDTV Dual Digital Express - NSW Australia
2009-09-07 11:52 ` Vincent McIntyre
2009-09-07 17:32 ` Alex Ferrara
@ 2009-09-07 17:34 ` Alex Ferrara
1 sibling, 0 replies; 4+ messages in thread
From: Alex Ferrara @ 2009-09-07 17:34 UTC (permalink / raw)
To: Vincent McIntyre; +Cc: linux-media
I probably should have also posted, that when the card starts tuning,
the firmware loads successfully
dmesg output
[ 1519.120018] xc2028 3-0061: Loading firmware for type=BASE F8MHZ
(3), id 0000000000000000.
[ 1520.290144] xc2028 3-0061: Loading firmware for type=D2633 DTV7
(90), id 0000000000000000.
[ 1520.304165] xc2028 3-0061: Loading SCODE for type=SCODE HAS_IF_5260
(60000000), id 0000000000000000.
[ 1535.158690] xc2028 3-0061: Loading firmware for type=BASE F8MHZ
(3), id 0000000000000000.
[ 1536.330153] xc2028 3-0061: Loading firmware for type=D2633 DTV7
(90), id 0000000000000000.
[ 1536.344173] xc2028 3-0061: Loading SCODE for type=SCODE HAS_IF_5260
(60000000), id 0000000000000000.
[ 1590.180124] CE: hpet increasing min_delta_ns to 22500 nsec
aF
On 07/09/2009, at 9:52 PM, Vincent McIntyre wrote:
> I have some issues with what I think is the same card, I'm in Sydney,
> using mythtv.
> I also have the DViCo Fusion Dual Digital 4 rev 1. (setup details at
> the end)
>
> At first when I scanned I could not get the SBS HD transport.
> Sometime between 28 Jun and 19 July I stopped being able to tune
> anything from channel 9 as well. This does not appear to have been
> triggered by a v4l code change, I did not
> pull from the tree in that time frame.
>
> The symptom I see when it "fails" is that mythv reports some signal,
> but it fails to get lock.
>
> When I try to rescan, I get weird errors - after mythtv-backend stops,
> I start getting USB errors of this kind:
>
> kernel: [ 663.703978] dvb-usb: recv bulk message failed: -110
> kernel: [ 663.703994] zl10353: write to reg 62 failed (err = -121)!
> kernel: [ 664.836658] dvb-usb: recv bulk message failed: -110
> kernel: [ 664.836665] zl10353: write to reg 62 failed (err = -121)!
> kernel: [ 665.699864] dvb-usb: bulk message failed: -110 (4/0)
> kernel: [ 665.699869] cxusb: i2c read failed
> kernel: [ 666.832545] dvb-usb: bulk message failed: -110 (5/0)
> kernel: [ 666.832551] zl10353: write to reg 50 failed (err = -121)!
> kernel: [ 667.696001] dvb-usb: bulk message failed: -110 (5/0)
> kernel: [ 667.696016] zl10353: write to reg 50 failed (err = -121)!
> kernel: [ 668.828433] dvb-usb: bulk message failed: -110 (2/0)
> kernel: [ 669.691639] dvb-usb: bulk message failed: -110 (4/0)
>
>
> At this point, the channel scan stalls out and the machine is very
> sluggish because of the DoSing of the USB bus. To recover I have to
> halt the machine and bring it up again.
> It's unclear to me if it is a problem with the Dual DIgital 4 or the
> Dual Digital Express.
>
> This appears to be a longstanding issue, existing from 2.6.26 (my
> kernel) through to 2.6.30 (see
> http://www.spinics.net/lists/linux-media/msg08244.html)
>
>
> I attempted to avoid the power cycling of the card by loading the
> tuner module with
> options tuner_xc2028 no_poweroff=1
> in /etc/modprobe.d/options, but with this option turned on I was
> unable to receive any stations.
>
> Alex, just to confirm we have the same card could you post the PCI
> IDs?
>
> When the card is detected I see in syslog:
> kernel: [ 57.768535] CORE cx23885[0]: subsystem: 18ac:db78, board:
> DViCO FusionHDTV DVB-T Dual Express [card=11,autodetected]
>
> and lspci gives me
> (lspci -n -s 04:00 && lspci -v -s 04:00)
> (sudo lspci -n -s 4:00 && sudo lspci -v -s 4:00; )
> 04:00.0 0400: 14f1:8852 (rev 02)
> 04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
> PCI Video and Audio Decoder (rev 02)
> Subsystem: DViCO Corporation FusionHDTV DVB-T Dual Express
> Flags: bus master, fast devsel, latency 0, IRQ 19
> Memory at 90000000 (64-bit, non-prefetchable) [size=2M]
> Capabilities: [40] Express Endpoint IRQ 0
> Capabilities: [80] Power Management version 2
> Capabilities: [90] Vital Product Data
> Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
>
>
> My system details:
> (cd ~/v4l; hg identify)
> 2b49813f8482 tip
>
> /etc/issue
> Ubuntu 8.04.3 LTS
>
> uname -a
> 2.6.24-24-generic #1 SMP Tue Aug 18 17:04:53 UTC 2009 i686 GNU/Linux
>
> lspci
> 00:00.0 0600: 8086:29c0 (rev 02)
> 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
> Controller (rev 02)
> 00:02.0 0300: 8086:29c2 (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express
> Integrated Graphics Controller (rev 02)
> 00:03.0 0780: 8086:29c4 (rev 02)
> 00:03.0 Communication controller: Intel Corporation 82G33/G31/P35/P31
> Express MEI Controller (rev 02)
> 00:19.0 0200: 8086:294c (rev 02)
> 00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit
> Network Connection (rev 02)
> 00:1a.0 0c03: 8086:2937 (rev 02)
> 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #4 (rev 02)
> 00:1a.1 0c03: 8086:2938 (rev 02)
> 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #5 (rev 02)
> 00:1a.2 0c03: 8086:2939 (rev 02)
> 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #6 (rev 02)
> 00:1a.7 0c03: 8086:293c (rev 02)
> 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
> EHCI Controller #2 (rev 02)
> 00:1b.0 0403: 8086:293e (rev 02)
> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
> Controller (rev 02)
> 00:1c.0 0604: 8086:2940 (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 1 (rev 02)
> 00:1c.1 0604: 8086:2942 (rev 02)
> 00:1c.2 0604: 8086:2944 (rev 02)
> 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 3 (rev 02)
> 00:1c.3 0604: 8086:2946 (rev 02)
> 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 4 (rev 02)
> 00:1c.4 0604: 8086:2948 (rev 02)
> 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 5 (rev 02)
> 00:1d.0 0c03: 8086:2934 (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #1 (rev 02)
> 00:1d.1 0c03: 8086:2935 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #2 (rev 02)
> 00:1d.2 0c03: 8086:2936 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
> UHCI Controller #3 (rev 02)
> 00:1d.7 0c03: 8086:293a (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
> EHCI Controller #1 (rev 02)
> 00:1e.0 0604: 8086:244e (rev 92)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
> 00:1f.0 0601: 8086:2912 (rev 02)
> 00:1f.0 ISA bridge: Intel Corporation 82801IH (ICH9DH) LPC Interface
> Controller (rev 02)
> 00:1f.2 0106: 8086:2922 (rev 02)
> 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH)
> 6 port SATA AHCI Controller (rev 02)
> 00:1f.3 0c05: 8086:2930 (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus
> Controller (rev 02)
> 02:00.0 0101: 11ab:6101 (rev b2)
> 02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101
> single-port PATA133 interface (rev b2)
> 04:00.0 0400: 14f1:8852 (rev 02)
> 04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
> PCI Video and Audio Decoder (rev 02)
> 06:00.0 0200: 10ec:8185 (rev 20)
> 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185
> IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
> 06:01.0 0c03: 1106:3038 (rev 61)
> 06:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61)
> 06:01.1 0c03: 1106:3038 (rev 61)
> 06:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61)
> 06:01.2 0c03: 1106:3104 (rev 63)
> 06:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
> 06:03.0 0c00: 104c:8023
> 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
> IEEE-1394a-2000 Controller (PHY/Link)
>
> lsusb
> 00:1f.3 0c05: 8086:2930 (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus
> Controller (rev 02)
> 02:00.0 0101: 11ab:6101 (rev b2)
> 02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101
> single-port PATA133 interface (rev b2)
> 04:00.0 0400: 14f1:8852 (rev 02)
> 04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
> PCI Video and Audio Decoder (rev 02)
> 06:00.0 0200: 10ec:8185 (rev 20)
> 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185
> IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
> 06:01.0 0c03: 1106:3038 (rev 61)
> 06:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61)
> 06:01.1 0c03: 1106:3038 (rev 61)
> 06:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 61)
> 06:01.2 0c03: 1106:3104 (rev 63)
> 06:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
> 06:03.0 0c00: 104c:8023
> 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
> IEEE-1394a-2000 Controller (PHY/Link)
>
>
>
> On 9/7/09, Alex Ferrara <alex@receptiveit.com.au> wrote:
>> I bought several of these cards over a year ago thinking that they
>> worked under Linux, but I found that while the cards seem to work
>> flawlessly for some people, in some geographic locations, they don't
>> work for me in Goulburn NSW pointing to Mt Gray.
>>
>> I have a mythtv backend with 2 x Dvico Dual Digital 4 PCI cards and
>> they are working perfectly, but the Dual Express cards will not tune
>> all transports. It seems that Prime and TEN hardly get enough signal
>> to tune.
>>
>> I have done some tests, and under Windows with MCE the cards work
>> perfectly using the same antenna
>>
>> I've heard that these cards have some sort of pre-amp that isn't
>> getting turned on in Linux. This might be part of the issue. I have
>> tried increasing signal amplification, but that degrades the other
>> signals that are working ok without the extra amp.
>>
>> If anyone can shed some light, I would be very appreciative
>>
>> aF
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-
>> media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-09-07 17:34 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-09-07 3:45 Fusion HDTV Dual Digital Express - NSW Australia Alex Ferrara
2009-09-07 11:52 ` Vincent McIntyre
2009-09-07 17:32 ` Alex Ferrara
2009-09-07 17:34 ` Alex Ferrara
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.