From: "Rafał Miłecki" <zajec5@gmail.com> To: MTD Maling List <linux-mtd@lists.infradead.org> Cc: linux-spi@vger.kernel.org, Kamal Dasu <kdasu.kdev@gmail.com>, Boris Brezillon <boris.brezillon@collabora.com> Subject: spi-nor 5.11 regression: Division by zero in kernel Date: Mon, 2 Aug 2021 15:24:27 +0200 [thread overview] Message-ID: <99bdb1eb-71a8-99e6-be03-a97185246740@gmail.com> (raw) Hi, It seems that kernel 5.11 broke spi-nor on Broadcom Northstar (BCM5301X) platforms. The problem seems to be spi_nor_spimem_read_data() which calculates: op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; On Northstar this happens to be: op.dummy.nbytes = (0 * 0) / 8; That results in bcm_qspi_bspi_set_flex_mode() dividing by zero in the: bpp |= (op->dummy.nbytes * 8) / op->dummy.buswidth; Could you take a look at that issue, please? GOOD 5.10.55 BAD 5.11.22 BAD 5.12.19 BAD 5.13.2 BAD 5.13.7 [ 1.075513] Division by zero in kernel. [ 1.079354] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.7 #18 [ 1.085376] Hardware name: BCM5301X [ 1.088873] [<c0108394>] (unwind_backtrace) from [<c010498c>] (show_stack+0x10/0x14) [ 1.096666] [<c010498c>] (show_stack) from [<c0696470>] (dump_stack+0x94/0xa8) [ 1.103926] [<c0696470>] (dump_stack) from [<c03e7f94>] (Ldiv0+0x8/0x10) [ 1.110653] [<c03e7f94>] (Ldiv0) from [<c0699274>] (bcm_qspi_exec_mem_op+0x3e0/0x744) [ 1.118512] [<c0699274>] (bcm_qspi_exec_mem_op) from [<c0698740>] (spi_mem_exec_op+0x184/0x4fc) [ 1.127234] [<c0698740>] (spi_mem_exec_op) from [<c0698bac>] (spi_mem_dirmap_read+0xf4/0x1c8) [ 1.135780] [<c0698bac>] (spi_mem_dirmap_read) from [<c0697d58>] (spi_nor_spimem_read_data+0x13c/0x1ec) [ 1.145199] [<c0697d58>] (spi_nor_spimem_read_data) from [<c0498d60>] (spi_nor_read+0x16c/0x174) [ 1.154008] [<c0498d60>] (spi_nor_read) from [<c04835d0>] (mtd_read_oob_std+0x9c/0xa4) [ 1.161964] [<c04835d0>] (mtd_read_oob_std) from [<c04855d0>] (mtd_read_oob+0x84/0x148) [ 1.169997] [<c04855d0>] (mtd_read_oob) from [<c04856f4>] (mtd_read+0x60/0x90) [ 1.177237] [<c04856f4>] (mtd_read) from [<c048ab50>] (bcm47xxpart_parse+0x1d4/0x744) [ 1.185089] [<c048ab50>] (bcm47xxpart_parse) from [<c0488568>] (parse_mtd_partitions+0x188/0x424) [ 1.193985] [<c0488568>] (parse_mtd_partitions) from [<c0486018>] (mtd_device_parse_register+0x7c/0x1c0) [ 1.203489] [<c0486018>] (mtd_device_parse_register) from [<c04998b8>] (spi_nor_probe+0x20c/0x2d0) [ 1.212471] [<c04998b8>] (spi_nor_probe) from [<c046fbf8>] (really_probe+0xf0/0x4dc) [ 1.220245] [<c046fbf8>] (really_probe) from [<c046dd40>] (bus_for_each_drv+0x80/0xd0) [ 1.228184] [<c046dd40>] (bus_for_each_drv) from [<c04701d0>] (__device_attach+0xf8/0x15c) [ 1.236468] [<c04701d0>] (__device_attach) from [<c046edd4>] (bus_probe_device+0x84/0x8c) [ 1.244668] [<c046edd4>] (bus_probe_device) from [<c046c6c4>] (device_add+0x300/0x840) [ 1.252606] [<c046c6c4>] (device_add) from [<c04b3dc4>] (spi_add_device+0x9c/0x164) [ 1.260292] [<c04b3dc4>] (spi_add_device) from [<c04b482c>] (spi_register_controller+0x8ac/0xbc0) [ 1.269187] [<c04b482c>] (spi_register_controller) from [<c04b7bd4>] (bcm_qspi_probe+0x600/0x700) [ 1.278092] [<c04b7bd4>] (bcm_qspi_probe) from [<c0471d3c>] (platform_probe+0x48/0x8c) [ 1.286030] [<c0471d3c>] (platform_probe) from [<c046fbf8>] (really_probe+0xf0/0x4dc) [ 1.293880] [<c046fbf8>] (really_probe) from [<c04705dc>] (device_driver_attach+0xf0/0x100) [ 1.302254] [<c04705dc>] (device_driver_attach) from [<c0470678>] (__driver_attach+0x8c/0x11c) [ 1.310888] [<c0470678>] (__driver_attach) from [<c046dc74>] (bus_for_each_dev+0x74/0xc0) [ 1.319086] [<c046dc74>] (bus_for_each_dev) from [<c046efc8>] (bus_add_driver+0xf4/0x1dc) [ 1.327286] [<c046efc8>] (bus_add_driver) from [<c0470cdc>] (driver_register+0x88/0x118) [ 1.335397] [<c0470cdc>] (driver_register) from [<c01016dc>] (do_one_initcall+0x54/0x1d0) [ 1.343598] [<c01016dc>] (do_one_initcall) from [<c08010e8>] (kernel_init_freeable+0x244/0x2ac) [ 1.352337] [<c08010e8>] (kernel_init_freeable) from [<c069a7c8>] (kernel_init+0x8/0x118) [ 1.360536] [<c069a7c8>] (kernel_init) from [<c0100130>] (ret_from_fork+0x14/0x24) [ 1.368125] Exception stack(0xc1035fb0 to 0xc1035ff8) [ 1.373184] 5fa0: 00000000 00000000 00000000 00000000 [ 1.381384] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.389582] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com> To: MTD Maling List <linux-mtd@lists.infradead.org> Cc: linux-spi@vger.kernel.org, Kamal Dasu <kdasu.kdev@gmail.com>, Boris Brezillon <boris.brezillon@collabora.com> Subject: spi-nor 5.11 regression: Division by zero in kernel Date: Mon, 2 Aug 2021 15:24:27 +0200 [thread overview] Message-ID: <99bdb1eb-71a8-99e6-be03-a97185246740@gmail.com> (raw) Hi, It seems that kernel 5.11 broke spi-nor on Broadcom Northstar (BCM5301X) platforms. The problem seems to be spi_nor_spimem_read_data() which calculates: op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; On Northstar this happens to be: op.dummy.nbytes = (0 * 0) / 8; That results in bcm_qspi_bspi_set_flex_mode() dividing by zero in the: bpp |= (op->dummy.nbytes * 8) / op->dummy.buswidth; Could you take a look at that issue, please? GOOD 5.10.55 BAD 5.11.22 BAD 5.12.19 BAD 5.13.2 BAD 5.13.7 [ 1.075513] Division by zero in kernel. [ 1.079354] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.7 #18 [ 1.085376] Hardware name: BCM5301X [ 1.088873] [<c0108394>] (unwind_backtrace) from [<c010498c>] (show_stack+0x10/0x14) [ 1.096666] [<c010498c>] (show_stack) from [<c0696470>] (dump_stack+0x94/0xa8) [ 1.103926] [<c0696470>] (dump_stack) from [<c03e7f94>] (Ldiv0+0x8/0x10) [ 1.110653] [<c03e7f94>] (Ldiv0) from [<c0699274>] (bcm_qspi_exec_mem_op+0x3e0/0x744) [ 1.118512] [<c0699274>] (bcm_qspi_exec_mem_op) from [<c0698740>] (spi_mem_exec_op+0x184/0x4fc) [ 1.127234] [<c0698740>] (spi_mem_exec_op) from [<c0698bac>] (spi_mem_dirmap_read+0xf4/0x1c8) [ 1.135780] [<c0698bac>] (spi_mem_dirmap_read) from [<c0697d58>] (spi_nor_spimem_read_data+0x13c/0x1ec) [ 1.145199] [<c0697d58>] (spi_nor_spimem_read_data) from [<c0498d60>] (spi_nor_read+0x16c/0x174) [ 1.154008] [<c0498d60>] (spi_nor_read) from [<c04835d0>] (mtd_read_oob_std+0x9c/0xa4) [ 1.161964] [<c04835d0>] (mtd_read_oob_std) from [<c04855d0>] (mtd_read_oob+0x84/0x148) [ 1.169997] [<c04855d0>] (mtd_read_oob) from [<c04856f4>] (mtd_read+0x60/0x90) [ 1.177237] [<c04856f4>] (mtd_read) from [<c048ab50>] (bcm47xxpart_parse+0x1d4/0x744) [ 1.185089] [<c048ab50>] (bcm47xxpart_parse) from [<c0488568>] (parse_mtd_partitions+0x188/0x424) [ 1.193985] [<c0488568>] (parse_mtd_partitions) from [<c0486018>] (mtd_device_parse_register+0x7c/0x1c0) [ 1.203489] [<c0486018>] (mtd_device_parse_register) from [<c04998b8>] (spi_nor_probe+0x20c/0x2d0) [ 1.212471] [<c04998b8>] (spi_nor_probe) from [<c046fbf8>] (really_probe+0xf0/0x4dc) [ 1.220245] [<c046fbf8>] (really_probe) from [<c046dd40>] (bus_for_each_drv+0x80/0xd0) [ 1.228184] [<c046dd40>] (bus_for_each_drv) from [<c04701d0>] (__device_attach+0xf8/0x15c) [ 1.236468] [<c04701d0>] (__device_attach) from [<c046edd4>] (bus_probe_device+0x84/0x8c) [ 1.244668] [<c046edd4>] (bus_probe_device) from [<c046c6c4>] (device_add+0x300/0x840) [ 1.252606] [<c046c6c4>] (device_add) from [<c04b3dc4>] (spi_add_device+0x9c/0x164) [ 1.260292] [<c04b3dc4>] (spi_add_device) from [<c04b482c>] (spi_register_controller+0x8ac/0xbc0) [ 1.269187] [<c04b482c>] (spi_register_controller) from [<c04b7bd4>] (bcm_qspi_probe+0x600/0x700) [ 1.278092] [<c04b7bd4>] (bcm_qspi_probe) from [<c0471d3c>] (platform_probe+0x48/0x8c) [ 1.286030] [<c0471d3c>] (platform_probe) from [<c046fbf8>] (really_probe+0xf0/0x4dc) [ 1.293880] [<c046fbf8>] (really_probe) from [<c04705dc>] (device_driver_attach+0xf0/0x100) [ 1.302254] [<c04705dc>] (device_driver_attach) from [<c0470678>] (__driver_attach+0x8c/0x11c) [ 1.310888] [<c0470678>] (__driver_attach) from [<c046dc74>] (bus_for_each_dev+0x74/0xc0) [ 1.319086] [<c046dc74>] (bus_for_each_dev) from [<c046efc8>] (bus_add_driver+0xf4/0x1dc) [ 1.327286] [<c046efc8>] (bus_add_driver) from [<c0470cdc>] (driver_register+0x88/0x118) [ 1.335397] [<c0470cdc>] (driver_register) from [<c01016dc>] (do_one_initcall+0x54/0x1d0) [ 1.343598] [<c01016dc>] (do_one_initcall) from [<c08010e8>] (kernel_init_freeable+0x244/0x2ac) [ 1.352337] [<c08010e8>] (kernel_init_freeable) from [<c069a7c8>] (kernel_init+0x8/0x118) [ 1.360536] [<c069a7c8>] (kernel_init) from [<c0100130>] (ret_from_fork+0x14/0x24) [ 1.368125] Exception stack(0xc1035fb0 to 0xc1035ff8) [ 1.373184] 5fa0: 00000000 00000000 00000000 00000000 [ 1.381384] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.389582] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2021-08-02 13:24 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-02 13:24 Rafał Miłecki [this message] 2021-08-02 13:24 ` spi-nor 5.11 regression: Division by zero in kernel Rafał Miłecki 2021-08-02 14:39 ` Tudor.Ambarus 2021-08-02 14:39 ` Tudor.Ambarus 2021-08-02 18:12 ` Pratyush Yadav 2021-08-02 18:12 ` Pratyush Yadav 2021-08-03 4:13 ` Tudor.Ambarus 2021-08-03 4:13 ` Tudor.Ambarus
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=99bdb1eb-71a8-99e6-be03-a97185246740@gmail.com \ --to=zajec5@gmail.com \ --cc=boris.brezillon@collabora.com \ --cc=kdasu.kdev@gmail.com \ --cc=linux-mtd@lists.infradead.org \ --cc=linux-spi@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.