* where is the Sysroot Location?
@ 2011-03-22 3:48 Li, Simon
2011-03-22 10:35 ` Lu, Lianhao
0 siblings, 1 reply; 6+ messages in thread
From: Li, Simon @ 2011-03-22 3:48 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 716 bytes --]
To whom may concern,
I tried configure the Yocto SDK.
Firstly, I need to config cross compiler options.
I choose Pocky Tree Mode.
I always get the error message, said, Yockto Configuration Error!
Specification Poky Tree Toolchain Root does not contain any toolchain yet.
Please run "bitbake meta-ide-support" to build the toolchain."
However, I assigned the toolchain directory which gcc resides, I still get this prompt message.
Could anyone please tell me what I have done wrong.
Thanks.
Simon Li
Intel Software & Service Group
B1 #205 Tun-Hwa North Rd, Taipei, Taiwan
Desk
+886-2-2514-4287
Mobile
+886-987-303-523
E-Mail
simon.li@intel.com<mailto:gorden.nieh@intel.com>
[-- Attachment #2: Type: text/html, Size: 6703 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: where is the Sysroot Location?
2011-03-22 3:48 where is the Sysroot Location? Li, Simon
@ 2011-03-22 10:35 ` Lu, Lianhao
2011-03-23 9:26 ` Li, Simon
0 siblings, 1 reply; 6+ messages in thread
From: Lu, Lianhao @ 2011-03-22 10:35 UTC (permalink / raw)
To: Li, Simon, yocto
[-- Attachment #1: Type: text/plain, Size: 1201 bytes --]
Hi Simon,
Before using the poky tree mode, you need to run "bitbake meta-ide-support" within the poky tree in a terminal. The eclipse plug-in needs the output of that to determine several configuration options for cross compilation.
Best Regards,
Lianhao
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org] On Behalf Of Li, Simon
Sent: Tuesday, March 22, 2011 11:48 AM
To: yocto@yoctoproject.org
Subject: [yocto] where is the Sysroot Location?
To whom may concern,
I tried configure the Yocto SDK.
Firstly, I need to config cross compiler options.
I choose Pocky Tree Mode.
I always get the error message, said, Yockto Configuration Error!
Specification Poky Tree Toolchain Root does not contain any toolchain yet.
Please run "bitbake meta-ide-support" to build the toolchain."
However, I assigned the toolchain directory which gcc resides, I still get this prompt message.
Could anyone please tell me what I have done wrong.
Thanks.
Simon Li
Intel Software & Service Group
B1 #205 Tun-Hwa North Rd, Taipei, Taiwan
Desk
+886-2-2514-4287
Mobile
+886-987-303-523
E-Mail
simon.li@intel.com<mailto:gorden.nieh@intel.com>
[-- Attachment #2: Type: text/html, Size: 8861 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: where is the Sysroot Location?
2011-03-22 10:35 ` Lu, Lianhao
@ 2011-03-23 9:26 ` Li, Simon
2011-03-23 9:52 ` Lu, Lianhao
2011-03-23 19:11 ` Zhang, Jessica
0 siblings, 2 replies; 6+ messages in thread
From: Li, Simon @ 2011-03-23 9:26 UTC (permalink / raw)
To: Lu, Lianhao, yocto
[-- Attachment #1.1.1: Type: text/plain, Size: 1968 bytes --]
Hi, Lianhao,
Thanks for your replying.
Actually, I already did "bitbake meta-ide-support".
And I use poky-extract-sdk to extract the pseudo.
However, when I clicked Run->External Tools->qemu_i586-poky-linux.
After kernel booting up , I got kernel panic because kernel panic - not syncing, init not Found.
According to the status, I think I setup the wrong Sysroot location.
As the screenshot,
[cid:image003.jpg@01CBE97F.8075E700]
Since I did not find any full root file system after finishing the build, could you tell me where I can make the full root file system?
Thanks very much.
Best Regards,
Simon
From: Lu, Lianhao
Sent: Tuesday, March 22, 2011 6:36 PM
To: Li, Simon; yocto@yoctoproject.org
Subject: RE: where is the Sysroot Location?
Hi Simon,
Before using the poky tree mode, you need to run "bitbake meta-ide-support" within the poky tree in a terminal. The eclipse plug-in needs the output of that to determine several configuration options for cross compilation.
Best Regards,
Lianhao
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org] On Behalf Of Li, Simon
Sent: Tuesday, March 22, 2011 11:48 AM
To: yocto@yoctoproject.org
Subject: [yocto] where is the Sysroot Location?
To whom may concern,
I tried configure the Yocto SDK.
Firstly, I need to config cross compiler options.
I choose Pocky Tree Mode.
I always get the error message, said, Yockto Configuration Error!
Specification Poky Tree Toolchain Root does not contain any toolchain yet.
Please run "bitbake meta-ide-support" to build the toolchain."
However, I assigned the toolchain directory which gcc resides, I still get this prompt message.
Could anyone please tell me what I have done wrong.
Thanks.
Simon Li
Intel Software & Service Group
B1 #205 Tun-Hwa North Rd, Taipei, Taiwan
Desk
+886-2-2514-4287
Mobile
+886-987-303-523
E-Mail
simon.li@intel.com<mailto:gorden.nieh@intel.com>
[-- Attachment #1.1.2: Type: text/html, Size: 12021 bytes --]
[-- Attachment #1.2: image003.jpg --]
[-- Type: image/jpeg, Size: 24698 bytes --]
[-- Attachment #2: Screenshot.png --]
[-- Type: image/png, Size: 83666 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: where is the Sysroot Location?
2011-03-23 9:26 ` Li, Simon
@ 2011-03-23 9:52 ` Lu, Lianhao
2011-03-23 19:11 ` Zhang, Jessica
1 sibling, 0 replies; 6+ messages in thread
From: Lu, Lianhao @ 2011-03-23 9:52 UTC (permalink / raw)
To: Li, Simon, yocto
[-- Attachment #1.1: Type: text/plain, Size: 2630 bytes --]
Hi Simon,
Since you have run "poky-extract-sdk", I assume you already had the rootfs. The poky-extract-sdk is meant to extract the rootfs from a tarball to a user specified directory, which should be specified as the sysroot in the plug-in.
To build a rootfs, you may want to run "bitbake poky-image-sdk"(for yocto 0.9) or "bitbake poky-image-sato-sdk" (for current git master), and use the poky-extract-sdk to extract the corresponding rootfs located in ${TMPDIR}/deploy/images.
Best Regards,
Lianhao
From: Li, Simon
Sent: Wednesday, March 23, 2011 5:27 PM
To: Lu, Lianhao; yocto@yoctoproject.org
Subject: RE: where is the Sysroot Location?
Hi, Lianhao,
Thanks for your replying.
Actually, I already did "bitbake meta-ide-support".
And I use poky-extract-sdk to extract the pseudo.
However, when I clicked Run->External Tools->qemu_i586-poky-linux.
After kernel booting up , I got kernel panic because kernel panic - not syncing, init not Found.
According to the status, I think I setup the wrong Sysroot location.
As the screenshot,
[cid:image001.jpg@01CBE981.C00001B0]
Since I did not find any full root file system after finishing the build, could you tell me where I can make the full root file system?
Thanks very much.
Best Regards,
Simon
From: Lu, Lianhao
Sent: Tuesday, March 22, 2011 6:36 PM
To: Li, Simon; yocto@yoctoproject.org
Subject: RE: where is the Sysroot Location?
Hi Simon,
Before using the poky tree mode, you need to run "bitbake meta-ide-support" within the poky tree in a terminal. The eclipse plug-in needs the output of that to determine several configuration options for cross compilation.
Best Regards,
Lianhao
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org] On Behalf Of Li, Simon
Sent: Tuesday, March 22, 2011 11:48 AM
To: yocto@yoctoproject.org
Subject: [yocto] where is the Sysroot Location?
To whom may concern,
I tried configure the Yocto SDK.
Firstly, I need to config cross compiler options.
I choose Pocky Tree Mode.
I always get the error message, said, Yockto Configuration Error!
Specification Poky Tree Toolchain Root does not contain any toolchain yet.
Please run "bitbake meta-ide-support" to build the toolchain."
However, I assigned the toolchain directory which gcc resides, I still get this prompt message.
Could anyone please tell me what I have done wrong.
Thanks.
Simon Li
Intel Software & Service Group
B1 #205 Tun-Hwa North Rd, Taipei, Taiwan
Desk
+886-2-2514-4287
Mobile
+886-987-303-523
E-Mail
simon.li@intel.com<mailto:gorden.nieh@intel.com>
[-- Attachment #1.2: Type: text/html, Size: 14984 bytes --]
[-- Attachment #2: image001.jpg --]
[-- Type: image/jpeg, Size: 24698 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: where is the Sysroot Location?
2011-03-23 9:26 ` Li, Simon
2011-03-23 9:52 ` Lu, Lianhao
@ 2011-03-23 19:11 ` Zhang, Jessica
2011-03-23 21:59 ` Zhang, Jessica
1 sibling, 1 reply; 6+ messages in thread
From: Zhang, Jessica @ 2011-03-23 19:11 UTC (permalink / raw)
To: Li, Simon, Lu, Lianhao, yocto
[-- Attachment #1.1.1: Type: text/plain, Size: 2545 bytes --]
Simon,
Please set your sysroot location to the directory where you extract the
rootfs using the poky-extract-sdk. BTW, poky-extract-sdk should extract
sysroot based on the rootfs not the pseudo.
Thanks,
Jessica
_____
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org]
On Behalf Of Li, Simon
Sent: Wednesday, March 23, 2011 2:27 AM
To: Lu, Lianhao; yocto@yoctoproject.org
Subject: Re: [yocto] where is the Sysroot Location?
Hi, Lianhao,
Thanks for your replying.
Actually, I already did "bitbake meta-ide-support".
And I use poky-extract-sdk to extract the pseudo.
However, when I clicked Run->External Tools->qemu_i586-poky-linux.
After kernel booting up , I got kernel panic because kernel panic - not
syncing, init not Found.
According to the status, I think I setup the wrong Sysroot location.
As the screenshot,
Screenshot.png
Since I did not find any full root file system after finishing the build,
could you tell me where I can make the full root file system?
Thanks very much.
Best Regards,
Simon
From: Lu, Lianhao
Sent: Tuesday, March 22, 2011 6:36 PM
To: Li, Simon; yocto@yoctoproject.org
Subject: RE: where is the Sysroot Location?
Hi Simon,
Before using the poky tree mode, you need to run "bitbake meta-ide-support"
within the poky tree in a terminal. The eclipse plug-in needs the output of
that to determine several configuration options for cross compilation.
Best Regards,
Lianhao
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org]
On Behalf Of Li, Simon
Sent: Tuesday, March 22, 2011 11:48 AM
To: yocto@yoctoproject.org
Subject: [yocto] where is the Sysroot Location?
To whom may concern,
I tried configure the Yocto SDK.
Firstly, I need to config cross compiler options.
I choose Pocky Tree Mode.
I always get the error message, said, Yockto Configuration Error!
Specification Poky Tree Toolchain Root does not contain any toolchain yet.
Please run "bitbake meta-ide-support" to build the toolchain."
However, I assigned the toolchain directory which gcc resides, I still get
this prompt message.
Could anyone please tell me what I have done wrong.
Thanks.
Simon Li
Intel Software & Service Group
B1 #205 Tun-Hwa North Rd, Taipei, Taiwan
Desk
+886-2-2514-4287
Mobile
+886-987-303-523
E-Mail
simon.li@intel.com <mailto:gorden.nieh@intel.com>
[-- Attachment #1.1.2: Type: text/html, Size: 14972 bytes --]
[-- Attachment #1.2: image003.jpg --]
[-- Type: image/jpeg, Size: 24698 bytes --]
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 8455 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: where is the Sysroot Location?
2011-03-23 19:11 ` Zhang, Jessica
@ 2011-03-23 21:59 ` Zhang, Jessica
0 siblings, 0 replies; 6+ messages in thread
From: Zhang, Jessica @ 2011-03-23 21:59 UTC (permalink / raw)
To: Zhang, Jessica, Li, Simon, Lu, Lianhao, yocto
[-- Attachment #1.1.1: Type: text/plain, Size: 3150 bytes --]
Simon,
Sorry missed your message below the image, the rootfs should be under
../build/tmp/deploy/images, use the files e.g.
poky-image-sato-sdk-qemux86-*.rootfs.tar.bz2. To bitbake meta-ide-support
won't build the rootfs file, to build it you need to do "bitbake
poky-image-sato-sdk" as an example...
Thanks,
Jessica
_____
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org]
On Behalf Of Zhang, Jessica
Sent: Wednesday, March 23, 2011 12:12 PM
To: Li, Simon; Lu, Lianhao; yocto@yoctoproject.org
Subject: Re: [yocto] where is the Sysroot Location?
Simon,
Please set your sysroot location to the directory where you extract the
rootfs using the poky-extract-sdk. BTW, poky-extract-sdk should extract
sysroot based on the rootfs not the pseudo.
Thanks,
Jessica
_____
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org]
On Behalf Of Li, Simon
Sent: Wednesday, March 23, 2011 2:27 AM
To: Lu, Lianhao; yocto@yoctoproject.org
Subject: Re: [yocto] where is the Sysroot Location?
Hi, Lianhao,
Thanks for your replying.
Actually, I already did "bitbake meta-ide-support".
And I use poky-extract-sdk to extract the pseudo.
However, when I clicked Run->External Tools->qemu_i586-poky-linux.
After kernel booting up , I got kernel panic because kernel panic - not
syncing, init not Found.
According to the status, I think I setup the wrong Sysroot location.
As the screenshot,
Screenshot.png
Since I did not find any full root file system after finishing the build,
could you tell me where I can make the full root file system?
Thanks very much.
Best Regards,
Simon
From: Lu, Lianhao
Sent: Tuesday, March 22, 2011 6:36 PM
To: Li, Simon; yocto@yoctoproject.org
Subject: RE: where is the Sysroot Location?
Hi Simon,
Before using the poky tree mode, you need to run "bitbake meta-ide-support"
within the poky tree in a terminal. The eclipse plug-in needs the output of
that to determine several configuration options for cross compilation.
Best Regards,
Lianhao
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org]
On Behalf Of Li, Simon
Sent: Tuesday, March 22, 2011 11:48 AM
To: yocto@yoctoproject.org
Subject: [yocto] where is the Sysroot Location?
To whom may concern,
I tried configure the Yocto SDK.
Firstly, I need to config cross compiler options.
I choose Pocky Tree Mode.
I always get the error message, said, Yockto Configuration Error!
Specification Poky Tree Toolchain Root does not contain any toolchain yet.
Please run "bitbake meta-ide-support" to build the toolchain."
However, I assigned the toolchain directory which gcc resides, I still get
this prompt message.
Could anyone please tell me what I have done wrong.
Thanks.
Simon Li
Intel Software & Service Group
B1 #205 Tun-Hwa North Rd, Taipei, Taiwan
Desk
+886-2-2514-4287
Mobile
+886-987-303-523
E-Mail
simon.li@intel.com <mailto:gorden.nieh@intel.com>
[-- Attachment #1.1.2: Type: text/html, Size: 16460 bytes --]
[-- Attachment #1.2: image003.jpg --]
[-- Type: image/jpeg, Size: 24698 bytes --]
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 8455 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-03-23 21:59 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-03-22 3:48 where is the Sysroot Location? Li, Simon
2011-03-22 10:35 ` Lu, Lianhao
2011-03-23 9:26 ` Li, Simon
2011-03-23 9:52 ` Lu, Lianhao
2011-03-23 19:11 ` Zhang, Jessica
2011-03-23 21:59 ` Zhang, Jessica
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.