* Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`
@ 2024-01-19 12:59 Paul Menzel
2024-01-19 15:11 ` Jörg Rödel
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Paul Menzel @ 2024-01-19 12:59 UTC (permalink / raw)
To: Jörg Rödel, Will Deacon; +Cc: iommu, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 5057 bytes --]
Dear Linux folks,
On a Dell XPS 13 9360 Linux 6.6.8, 6.6.11 and 6.7 (and earlier versions)
log the lines below when resuming from ACPI S3 (deep):
[ 0.000000] Linux version 6.7-amd64
(debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-13 (Debian
13.2.0-9) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41.50.20231227) #1
SMP PREEMPT_DYNAMIC Debian 6.7-1~exp1 (2024-01-08)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7-amd64
root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer
mem_sleep_default=deep log_buf_len=8M
[…]
[ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0
06/02/2022
[…]
[ 99.711230] PM: suspend entry (deep)
[…]
[ 99.722101] printk: Suspending console(s) (use
no_console_suspend to debug)
[ 100.285178] ACPI: EC: interrupt blocked
[ 100.319908] ACPI: PM: Preparing to enter system sleep state S3
[ 100.331793] ACPI: EC: event blocked
[ 100.331798] ACPI: EC: EC stopped
[ 100.331800] ACPI: PM: Saving platform NVS memory
[ 100.335224] Disabling non-boot CPUs ...
[ 100.337412] smpboot: CPU 1 is now offline
[ 100.341065] smpboot: CPU 2 is now offline
[ 100.346441] smpboot: CPU 3 is now offline
[ 100.353086] ACPI: PM: Low-level resume complete
[ 100.353129] ACPI: EC: EC started
[ 100.353129] ACPI: PM: Restoring platform NVS memory
[ 100.355219] Enabling non-boot CPUs ...
[ 100.355244] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 100.355954] CPU1 is up
[ 100.355972] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 100.356698] CPU2 is up
[ 100.356716] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 100.357371] CPU3 is up
[ 100.360217] ACPI: PM: Waking up from system sleep state S3
[ 100.668380] ACPI: EC: interrupt unblocked
[ 100.668598] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS
workaround enabled
[ 100.668606] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS
workaround enabled
[ 100.668643] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS
workaround enabled
[ 100.690996] DMAR: DRHD: handling fault status reg 2
[ 100.691001] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault
index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt
request
But I am unable to find the device f0:1f.0:
$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th
Gen Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation HD
Graphics 620 [8086:5916] (rev 02)
00:04.0 Signal processing controller [1180]: Intel Corporation Xeon
E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
[8086:1903] (rev 02)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP
USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
00:14.2 Signal processing controller [1180]: Intel Corporation
Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
00:15.0 Signal processing controller [1180]: Intel Corporation
Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
00:15.1 Signal processing controller [1180]: Intel Corporation
Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise
Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port #1 [8086:9d10] (rev f1)
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port #5 [8086:9d14] (rev f1)
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
Express Root Port #9 [8086:9d18] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC
Controller [8086:9d58] (rev 21)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise
Point-LP PMC [8086:9d21] (rev 21)
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD
Audio [8086:9d71] (rev 21)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus
[8086:9d23] (rev 21)
01:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
Bridge [Alpine Ridge 2C 2015] [8086:1576]
02:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
Bridge [Alpine Ridge 2C 2015] [8086:1576]
02:01.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
Bridge [Alpine Ridge 2C 2015] [8086:1576]
02:02.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
Bridge [Alpine Ridge 2C 2015] [8086:1576]
39:00.0 USB controller [0c03]: Intel Corporation DSL6340 USB 3.1
Controller [Alpine Ridge] [8086:15b5]
3a:00.0 Network controller [0280]: Qualcomm Atheros QCA6174
802.11ac Wireless Network Adapter [168c:003e] (rev 32)
3b:00.0 Non-Volatile memory controller [0108]: SK hynix PC300 NVMe
Solid State Drive 512GB [1c5c:1284]
As this is logged as an error, can this be fixed somehow?
Kind regards,
Paul
[-- Attachment #2: 202401197–dell-xps-13-9360–linux-6.7-messages.txt --]
[-- Type: text/plain, Size: 96280 bytes --]
[ 0.000000] Linux version 6.7-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-13 (Debian 13.2.0-9) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41.50.20231227) #1 SMP PREEMPT_DYNAMIC Debian 6.7-1~exp1 (2024-01-08)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7-amd64 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000556aafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x4ea13018-0x4ea23057] usable ==> usable
[ 0.000000] e820: update [mem 0x4ea13018-0x4ea23057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000004ea13017] usable
[ 0.000000] reserve setup_data: [mem 0x000000004ea13018-0x000000004ea23057] usable
[ 0.000000] reserve setup_data: [mem 0x000000004ea23058-0x00000000556aafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] efi: EFI v2.4 by American Megatrends
[ 0.000000] efi: ACPI=0x6518d000 ACPI 2.0=0x6518d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6f812000 ESRT=0x6fc86698 MEMATTR=0x6267a298 INITRD=0x5577da98 TPMEventLog=0x5577e018
[ 0.000000] efi: Remove mem34: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Not removing mem35: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem36: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem38: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
[ 0.000000] tsc: Detected 2900.000 MHz processor
[ 0.000000] tsc: Detected 2899.886 MHz TSC
[ 0.000678] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000681] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000688] last_pfn = 0x481800 max_arch_pfn = 0x400000000
[ 0.000692] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000694] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001017] last_pfn = 0x78600 max_arch_pfn = 0x400000000
[ 0.007382] esrt: Reserving ESRT space from 0x000000006fc86698 to 0x000000006fc866d0.
[ 0.007386] Using GB pages for direct mapping
[ 0.013936] printk: log_buf_len: 8388608 bytes
[ 0.013937] printk: early log buf free: 125296(95%)
[ 0.013938] RAMDISK: [mem 0x4ea24000-0x52530fff]
[ 0.013942] ACPI: Early table checksum verification disabled
[ 0.013945] ACPI: RSDP 0x000000006518D000 000024 (v02 DELL )
[ 0.013949] ACPI: XSDT 0x000000006518D0C0 000104 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013954] ACPI: FACP 0x00000000651B2A40 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.013961] ACPI: DSDT 0x000000006518D258 0257E7 (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.013964] ACPI: FACS 0x000000006F86F180 000040
[ 0.013966] ACPI: APIC 0x00000000651B2B50 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.013969] ACPI: FPDT 0x00000000651B2BD8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013971] ACPI: FIDT 0x00000000651B2C20 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013974] ACPI: MCFG 0x00000000651B2CD0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.013976] ACPI: HPET 0x00000000651B2D10 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.013979] ACPI: SSDT 0x00000000651B2D48 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.013981] ACPI: BOOT 0x00000000651B30A8 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013984] ACPI: SSDT 0x00000000651B30D0 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.013986] ACPI: HPET 0x00000000651B43A0 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.013989] ACPI: SSDT 0x00000000651B43D8 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.013991] ACPI: UEFI 0x00000000651B5160 000042 (v01 00000000 00000000)
[ 0.013994] ACPI: SSDT 0x00000000651B51A8 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.013996] ACPI: LPIT 0x00000000651B6088 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.013999] ACPI: SSDT 0x00000000651B6120 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.014001] ACPI: SSDT 0x00000000651B6288 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.014004] ACPI: SSDT 0x00000000651B6528 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.014006] ACPI: SSDT 0x00000000651B9530 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.014009] ACPI: DBGP 0x00000000651B9610 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.014011] ACPI: DBG2 0x00000000651B9648 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.014014] ACPI: SSDT 0x00000000651B96A0 0007DD (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.014016] ACPI: SSDT 0x00000000651B9E80 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.014019] ACPI: SLIC 0x00000000651C2378 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.014021] ACPI: NHLT 0x00000000651C24F0 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.014024] ACPI: BGRT 0x00000000651C2520 000038 (v00 01072009 AMI 00010013)
[ 0.014026] ACPI: TPM2 0x00000000651C2558 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.014029] ACPI: ASF! 0x00000000651C2590 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.014031] ACPI: DMAR 0x00000000651C2630 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.014033] ACPI: Reserving FACP table memory at [mem 0x651b2a40-0x651b2b4b]
[ 0.014035] ACPI: Reserving DSDT table memory at [mem 0x6518d258-0x651b2a3e]
[ 0.014035] ACPI: Reserving FACS table memory at [mem 0x6f86f180-0x6f86f1bf]
[ 0.014036] ACPI: Reserving APIC table memory at [mem 0x651b2b50-0x651b2bd3]
[ 0.014037] ACPI: Reserving FPDT table memory at [mem 0x651b2bd8-0x651b2c1b]
[ 0.014037] ACPI: Reserving FIDT table memory at [mem 0x651b2c20-0x651b2ccb]
[ 0.014038] ACPI: Reserving MCFG table memory at [mem 0x651b2cd0-0x651b2d0b]
[ 0.014039] ACPI: Reserving HPET table memory at [mem 0x651b2d10-0x651b2d47]
[ 0.014039] ACPI: Reserving SSDT table memory at [mem 0x651b2d48-0x651b30a0]
[ 0.014040] ACPI: Reserving BOOT table memory at [mem 0x651b30a8-0x651b30cf]
[ 0.014041] ACPI: Reserving SSDT table memory at [mem 0x651b30d0-0x651b439e]
[ 0.014041] ACPI: Reserving HPET table memory at [mem 0x651b43a0-0x651b43d7]
[ 0.014042] ACPI: Reserving SSDT table memory at [mem 0x651b43d8-0x651b515b]
[ 0.014043] ACPI: Reserving UEFI table memory at [mem 0x651b5160-0x651b51a1]
[ 0.014043] ACPI: Reserving SSDT table memory at [mem 0x651b51a8-0x651b6085]
[ 0.014044] ACPI: Reserving LPIT table memory at [mem 0x651b6088-0x651b611b]
[ 0.014045] ACPI: Reserving SSDT table memory at [mem 0x651b6120-0x651b6280]
[ 0.014045] ACPI: Reserving SSDT table memory at [mem 0x651b6288-0x651b6526]
[ 0.014046] ACPI: Reserving SSDT table memory at [mem 0x651b6528-0x651b9529]
[ 0.014046] ACPI: Reserving SSDT table memory at [mem 0x651b9530-0x651b960a]
[ 0.014047] ACPI: Reserving DBGP table memory at [mem 0x651b9610-0x651b9643]
[ 0.014048] ACPI: Reserving DBG2 table memory at [mem 0x651b9648-0x651b969b]
[ 0.014048] ACPI: Reserving SSDT table memory at [mem 0x651b96a0-0x651b9e7c]
[ 0.014049] ACPI: Reserving SSDT table memory at [mem 0x651b9e80-0x651c2370]
[ 0.014050] ACPI: Reserving SLIC table memory at [mem 0x651c2378-0x651c24ed]
[ 0.014050] ACPI: Reserving NHLT table memory at [mem 0x651c24f0-0x651c251c]
[ 0.014051] ACPI: Reserving BGRT table memory at [mem 0x651c2520-0x651c2557]
[ 0.014052] ACPI: Reserving TPM2 table memory at [mem 0x651c2558-0x651c258b]
[ 0.014052] ACPI: Reserving ASF! table memory at [mem 0x651c2590-0x651c262f]
[ 0.014053] ACPI: Reserving DMAR table memory at [mem 0x651c2630-0x651c271f]
[ 0.014179] No NUMA configuration found
[ 0.014180] Faking a node at [mem 0x0000000000000000-0x00000004817fffff]
[ 0.014188] NODE_DATA(0) allocated [mem 0x47f3d5000-0x47f3fffff]
[ 0.014336] Zone ranges:
[ 0.014337] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.014339] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.014340] Normal [mem 0x0000000100000000-0x00000004817fffff]
[ 0.014341] Device empty
[ 0.014342] Movable zone start for each node
[ 0.014344] Early memory node ranges
[ 0.014345] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.014346] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.014347] node 0: [mem 0x0000000000100000-0x00000000556aafff]
[ 0.014348] node 0: [mem 0x00000000556ad000-0x0000000064df3fff]
[ 0.014348] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
[ 0.014349] node 0: [mem 0x0000000078000000-0x00000000785fffff]
[ 0.014349] node 0: [mem 0x0000000100000000-0x00000004817fffff]
[ 0.014351] Initmem setup node 0 [mem 0x0000000000001000-0x00000004817fffff]
[ 0.014355] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.014356] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.014380] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.016731] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.017085] On node 0, zone DMA32: 45579 pages in unavailable ranges
[ 0.017557] On node 0, zone Normal: 31232 pages in unavailable ranges
[ 0.017763] On node 0, zone Normal: 26624 pages in unavailable ranges
[ 0.017770] Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff]
[ 0.017956] ACPI: PM-Timer IO Port: 0x1808
[ 0.017962] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.017963] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.017964] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.017965] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.017991] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.017993] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.017995] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.017998] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.017999] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.018005] e820: update [mem 0x62264000-0x623f0fff] usable ==> reserved
[ 0.018015] TSC deadline timer available
[ 0.018015] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.018030] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.018032] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.018033] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.018035] PM: hibernation: Registered nosave memory: [mem 0x4ea13000-0x4ea13fff]
[ 0.018036] PM: hibernation: Registered nosave memory: [mem 0x4ea23000-0x4ea23fff]
[ 0.018037] PM: hibernation: Registered nosave memory: [mem 0x556ab000-0x556abfff]
[ 0.018038] PM: hibernation: Registered nosave memory: [mem 0x556ac000-0x556acfff]
[ 0.018039] PM: hibernation: Registered nosave memory: [mem 0x62264000-0x623f0fff]
[ 0.018041] PM: hibernation: Registered nosave memory: [mem 0x64df4000-0x6517ffff]
[ 0.018041] PM: hibernation: Registered nosave memory: [mem 0x65180000-0x651c3fff]
[ 0.018042] PM: hibernation: Registered nosave memory: [mem 0x651c4000-0x6f871fff]
[ 0.018042] PM: hibernation: Registered nosave memory: [mem 0x6f872000-0x6fffefff]
[ 0.018044] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff]
[ 0.018045] PM: hibernation: Registered nosave memory: [mem 0x78600000-0x7c7fffff]
[ 0.018046] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0xfdffffff]
[ 0.018046] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.018047] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.018047] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.018048] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.018048] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.018049] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.018051] [mem 0x7c800000-0xfdffffff] available for PCI devices
[ 0.018052] Booting paravirtualized kernel on bare hardware
[ 0.018053] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.022551] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.022845] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288
[ 0.022851] pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152
[ 0.022853] pcpu-alloc: [0] 0 1 2 3
[ 0.022869] Kernel command line: BOOT_IMAGE=/vmlinuz-6.7-amd64 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M
[ 0.022934] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.7-amd64", will be passed to user space.
[ 0.022968] random: crng init done
[ 0.024480] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.025238] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.025306] Fallback order for Node 0: 0
[ 0.025309] Built 1 zonelists, mobility grouping on. Total pages: 4026691
[ 0.025310] Policy zone: Normal
[ 0.025314] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.025320] software IO TLB: area num 4.
[ 0.043419] Memory: 1616272K/16363068K available (16384K kernel code, 2365K rwdata, 10652K rodata, 3992K init, 3568K bss, 541684K reserved, 0K cma-reserved)
[ 0.043600] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.043609] Kernel/User page tables isolation: enabled
[ 0.043633] ftrace: allocating 43342 entries in 170 pages
[ 0.051043] ftrace: allocated 170 pages with 4 groups
[ 0.051666] Dynamic Preempt: voluntary
[ 0.051693] rcu: Preemptible hierarchical RCU implementation.
[ 0.051694] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.051695] Trampoline variant of Tasks RCU enabled.
[ 0.051695] Rude variant of Tasks RCU enabled.
[ 0.051695] Tracing variant of Tasks RCU enabled.
[ 0.051696] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.051697] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.054076] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.054293] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.054469] spurious 8259A interrupt: IRQ7.
[ 0.054493] Console: colour dummy device 80x25
[ 0.054495] printk: legacy console [tty0] enabled
[ 0.054530] ACPI: Core revision 20230628
[ 0.054670] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.054671] APIC: Switch to symmetric I/O mode setup
[ 0.054673] DMAR: Host address width 39
[ 0.054674] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.054679] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.054681] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.054684] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.054686] DMAR: RMRR base: 0x00000064ec2000 end: 0x00000064ee1fff
[ 0.054687] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff
[ 0.054688] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.054689] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.054691] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.054692] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.054693] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.056312] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.056314] x2apic enabled
[ 0.056372] APIC: Switched APIC routing to: cluster x2apic
[ 0.060236] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[ 0.060242] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
[ 0.060272] CPU0: Thermal monitoring enabled (TM1)
[ 0.060306] process: using mwait in idle threads
[ 0.060308] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.060309] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.060321] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.060323] Spectre V2 : Mitigation: IBRS
[ 0.060324] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.060325] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.060325] RETBleed: Mitigation: IBRS
[ 0.060327] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.060328] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.060329] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.060336] MDS: Mitigation: Clear CPU buffers
[ 0.060337] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.060341] SRBDS: Mitigation: Microcode
[ 0.060346] GDS: Mitigation: Microcode
[ 0.060352] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.060354] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.060355] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.060355] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.060356] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.060358] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.060359] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.060360] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.060362] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.064239] Freeing SMP alternatives memory: 36K
[ 0.064239] pid_max: default: 32768 minimum: 301
[ 0.064239] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity
[ 0.064239] landlock: Up and running.
[ 0.064239] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.064239] AppArmor: AppArmor initialized
[ 0.064239] TOMOYO Linux initialized
[ 0.064239] LSM support for eBPF active
[ 0.064239] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.064239] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.064239] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.064239] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.064239] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.064239] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.064239] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.064239] ... version: 4
[ 0.064239] ... bit width: 48
[ 0.064239] ... generic registers: 4
[ 0.064239] ... value mask: 0000ffffffffffff
[ 0.064239] ... max period: 00007fffffffffff
[ 0.064239] ... fixed-purpose events: 3
[ 0.064239] ... event mask: 000000070000000f
[ 0.064239] signal: max sigframe size: 2032
[ 0.064239] Estimated ratio of average max frequency by base frequency (times 1024): 1235
[ 0.064239] rcu: Hierarchical SRCU implementation.
[ 0.064239] rcu: Max phase no-delay instances is 1000.
[ 0.064239] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.064239] smp: Bringing up secondary CPUs ...
[ 0.064239] smpboot: x86: Booting SMP configuration:
[ 0.064239] .... node #0, CPUs: #1 #2 #3
[ 0.064239] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.064239] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.064239] smp: Brought up 1 node, 4 CPUs
[ 0.064239] smpboot: Max logical packages: 1
[ 0.064239] smpboot: Total of 4 processors activated (23199.08 BogoMIPS)
[ 0.084472] node 0 deferred pages initialised in 20ms
[ 0.085524] devtmpfs: initialized
[ 0.085524] x86/mm: Memory block size: 128MB
[ 0.085540] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes)
[ 0.085540] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes)
[ 0.090097] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.090105] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.090149] pinctrl core: initialized pinctrl subsystem
[ 0.090646] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.090881] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.090985] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.091111] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.091135] audit: initializing netlink subsys (disabled)
[ 0.091152] audit: type=2000 audit(1705666525.028:1): state=initialized audit_enabled=0 res=1
[ 0.091152] thermal_sys: Registered thermal governor 'fair_share'
[ 0.091152] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.091152] thermal_sys: Registered thermal governor 'step_wise'
[ 0.091152] thermal_sys: Registered thermal governor 'user_space'
[ 0.091152] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.091152] cpuidle: using governor ladder
[ 0.091152] cpuidle: using governor menu
[ 0.091152] Simple Boot Flag at 0x47 set to 0x80
[ 0.091152] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.091152] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.091152] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.091152] PCI: not using MMCONFIG
[ 0.091152] PCI: Using configuration type 1 for base access
[ 0.091152] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.091152] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.091152] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.091152] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.091152] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.091152] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.091152] ACPI: Added _OSI(Module Device)
[ 0.091152] ACPI: Added _OSI(Processor Device)
[ 0.091152] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092245] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.124380] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 5.046680] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 5.051806] ACPI: Dynamic OEM Table Load:
[ 5.051812] ACPI: SSDT 0xFFFF9D59810D8800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 5.052757] ACPI: Dynamic OEM Table Load:
[ 5.052762] ACPI: SSDT 0xFFFF9D598113A000 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 5.054323] ACPI: Dynamic OEM Table Load:
[ 5.054327] ACPI: SSDT 0xFFFF9D5981139000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 5.055491] ACPI: Dynamic OEM Table Load:
[ 5.055495] ACPI: SSDT 0xFFFF9D598114E600 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 5.057881] ACPI: _OSC evaluated successfully for all CPUs
[ 5.058011] ACPI: EC: EC started
[ 5.058012] ACPI: EC: interrupt blocked
[ 5.062577] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 5.062579] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 5.062581] ACPI: Interpreter enabled
[ 5.062616] ACPI: PM: (supports S0 S3 S4 S5)
[ 5.062617] ACPI: Using IOAPIC for interrupt routing
[ 5.062653] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 5.063340] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[ 5.063349] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 5.063350] PCI: Using E820 reservations for host bridge windows
[ 5.063833] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 5.075046] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ 5.075301] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ 5.075556] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ 5.075806] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ 5.076313] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ 5.076564] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ 5.077166] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ 5.077416] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 5.077669] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ 5.077919] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ 5.078167] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ 5.078421] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ 5.078674] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ 5.078938] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ 5.079186] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ 5.079439] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ 5.079689] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ 5.080733] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ 5.080984] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ 5.081234] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ 5.099161] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 5.099167] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 5.099317] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 5.099585] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 5.099587] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 5.100379] PCI host bridge to bus 0000:00
[ 5.100381] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 5.100383] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 5.100386] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 5.100387] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window]
[ 5.100388] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 5.100392] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 5.100410] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 5.100482] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 5.100489] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[ 5.100494] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 5.100498] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 5.100510] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 5.100512] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 5.100651] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 5.100659] pci 0000:00:04.0: reg 0x10: [mem 0xdc320000-0xdc327fff 64bit]
[ 5.100898] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 5.100912] pci 0000:00:14.0: reg 0x10: [mem 0xdc310000-0xdc31ffff 64bit]
[ 5.100971] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 5.101413] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 5.101427] pci 0000:00:14.2: reg 0x10: [mem 0xdc334000-0xdc334fff 64bit]
[ 5.101567] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 5.101599] pci 0000:00:15.0: reg 0x10: [mem 0xdc333000-0xdc333fff 64bit]
[ 5.101911] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 5.101941] pci 0000:00:15.1: reg 0x10: [mem 0xdc332000-0xdc332fff 64bit]
[ 5.102245] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 5.102258] pci 0000:00:16.0: reg 0x10: [mem 0xdc331000-0xdc331fff 64bit]
[ 5.102302] pci 0000:00:16.0: PME# supported from D3hot
[ 5.102588] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 5.102647] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 5.102661] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 5.103022] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 5.103093] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 5.103111] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 5.103478] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 5.103540] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 5.103556] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 5.103933] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[ 5.104210] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 5.104221] pci 0000:00:1f.2: reg 0x10: [mem 0xdc32c000-0xdc32ffff]
[ 5.104430] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[ 5.104448] pci 0000:00:1f.3: reg 0x10: [mem 0xdc328000-0xdc32bfff 64bit]
[ 5.104472] pci 0000:00:1f.3: reg 0x20: [mem 0xdc300000-0xdc30ffff 64bit]
[ 5.104513] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 5.105037] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 5.105095] pci 0000:00:1f.4: reg 0x10: [mem 0xdc330000-0xdc3300ff 64bit]
[ 5.105166] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 5.105485] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400
[ 5.105532] pci 0000:01:00.0: enabling Extended Tags
[ 5.105609] pci 0000:01:00.0: supports D1 D2
[ 5.105610] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.105684] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 5.105939] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 5.105944] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 5.105948] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 5.106024] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400
[ 5.106073] pci 0000:02:00.0: enabling Extended Tags
[ 5.106154] pci 0000:02:00.0: supports D1 D2
[ 5.106155] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.106320] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400
[ 5.106368] pci 0000:02:01.0: enabling Extended Tags
[ 5.106454] pci 0000:02:01.0: supports D1 D2
[ 5.106455] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.106615] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400
[ 5.106664] pci 0000:02:02.0: enabling Extended Tags
[ 5.106747] pci 0000:02:02.0: supports D1 D2
[ 5.106748] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.106919] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 5.106926] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 5.106932] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 5.106968] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 5.106976] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 5.107017] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 5.107025] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 5.107030] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 5.107102] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330
[ 5.107123] pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff]
[ 5.107196] pci 0000:39:00.0: enabling Extended Tags
[ 5.107299] pci 0000:39:00.0: supports D1 D2
[ 5.107300] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.107398] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 5.107533] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 5.107541] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 5.107895] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000
[ 5.108112] pci 0000:3a:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
[ 5.109225] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 5.110818] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 5.110822] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 5.110908] pci 0000:3b:00.0: [1c5c:1284] type 00 class 0x010802
[ 5.110929] pci 0000:3b:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
[ 5.111034] pci 0000:3b:00.0: PME# supported from D0 D1 D3hot
[ 5.111343] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 5.111346] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 5.114023] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 5.114023] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 5.114023] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 5.114023] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 5.114023] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 5.114023] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 5.114023] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 5.114023] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 5.124100] ACPI: EC: interrupt unblocked
[ 5.124101] ACPI: EC: event unblocked
[ 5.124107] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 5.124108] ACPI: EC: GPE=0x14
[ 5.124109] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 5.124111] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 5.124242] iommu: Default domain type: Translated
[ 5.124242] iommu: DMA domain TLB invalidation policy: lazy mode
[ 5.124242] pps_core: LinuxPPS API ver. 1 registered
[ 5.124242] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.124242] PTP clock support registered
[ 5.124242] EDAC MC: Ver: 3.0.0
[ 5.124554] efivars: Registered efivars operations
[ 5.124589] NetLabel: Initializing
[ 5.124589] NetLabel: domain hash size = 128
[ 5.124589] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 5.124589] NetLabel: unlabeled traffic allowed by default
[ 5.124589] PCI: Using ACPI for IRQ routing
[ 5.146975] PCI: pci_cache_line_size set to 64 bytes
[ 5.147365] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 5.147366] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 5.147367] e820: reserve RAM buffer [mem 0x4ea13018-0x4fffffff]
[ 5.147368] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff]
[ 5.147370] e820: reserve RAM buffer [mem 0x62264000-0x63ffffff]
[ 5.147371] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff]
[ 5.147372] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff]
[ 5.147373] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff]
[ 5.148246] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 5.148247] pci 0000:00:02.0: vgaarb: bridge control possible
[ 5.148248] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 5.148252] vgaarb: loaded
[ 5.148322] clocksource: Switched to clocksource tsc-early
[ 5.148991] VFS: Disk quotas dquot_6.6.0
[ 5.149004] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.149115] AppArmor: AppArmor Filesystem Enabled
[ 5.149127] pnp: PnP ACPI init
[ 5.149332] system 00:00: [io 0x0680-0x069f] has been reserved
[ 5.149335] system 00:00: [io 0xffff] has been reserved
[ 5.149337] system 00:00: [io 0xffff] has been reserved
[ 5.149338] system 00:00: [io 0xffff] has been reserved
[ 5.149340] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 5.149341] system 00:00: [io 0x164e-0x164f] has been reserved
[ 5.149463] system 00:02: [io 0x1854-0x1857] has been reserved
[ 5.149793] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 5.149796] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 5.149798] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 5.149799] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 5.149801] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 5.149802] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 5.149804] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 5.149806] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 5.149807] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 5.149809] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 5.149853] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 5.149856] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 5.149857] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 5.149859] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 5.149860] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 5.149862] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 5.149863] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 5.150107] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 5.150988] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 5.150990] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 5.154084] pnp: PnP ACPI: found 9 devices
[ 5.159616] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 5.159670] NET: Registered PF_INET protocol family
[ 5.159790] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 5.162055] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 5.162078] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 5.162133] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 5.162319] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 5.162511] TCP: Hash tables configured (established 131072 bind 65536)
[ 5.162577] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 5.162616] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 5.162657] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 5.162710] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 5.162715] NET: Registered PF_XDP protocol family
[ 5.162725] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[ 5.162729] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 5.162731] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 5.162734] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[ 5.162736] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 3000
[ 5.162743] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x4fff]
[ 5.162746] pci 0000:01:00.0: BAR 13: assigned [io 0x2000-0x3fff]
[ 5.162749] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 5.162751] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 5.162753] pci 0000:02:01.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 5.162754] pci 0000:02:02.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 5.162756] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 5.162757] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 5.162759] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 5.162764] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 5.162772] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 5.162775] pci 0000:02:01.0: bridge window [io 0x2000-0x2fff]
[ 5.162779] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 5.162783] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 5.162788] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 5.162791] pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
[ 5.162795] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 5.162803] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 5.162805] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
[ 5.162809] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 5.162814] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 5.162820] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 5.162821] pci 0000:00:1c.0: bridge window [io 0x2000-0x4fff]
[ 5.162824] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 5.162827] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 5.162830] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 5.162833] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 5.162839] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 5.162842] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 5.162847] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 5.162849] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 5.162850] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 5.162851] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window]
[ 5.162853] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 5.162854] pci_bus 0000:01: resource 0 [io 0x2000-0x4fff]
[ 5.162855] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 5.162857] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 5.162858] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
[ 5.162859] pci_bus 0000:02: resource 1 [mem 0xc4000000-0xda0fffff]
[ 5.162860] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 5.162862] pci_bus 0000:03: resource 1 [mem 0xda000000-0xda0fffff]
[ 5.162863] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 5.162864] pci_bus 0000:04: resource 1 [mem 0xc4000000-0xd9efffff]
[ 5.162865] pci_bus 0000:04: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 5.162867] pci_bus 0000:39: resource 0 [io 0x3000-0x3fff]
[ 5.162868] pci_bus 0000:39: resource 1 [mem 0xd9f00000-0xd9ffffff]
[ 5.162869] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
[ 5.162871] pci_bus 0000:3b: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 5.163385] pci 0000:01:00.0: enabling device (0006 -> 0007)
[ 5.163422] pci 0000:02:02.0: enabling device (0006 -> 0007)
[ 5.163688] PCI: CLS 128 bytes, default 64
[ 5.163699] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
[ 5.163703] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
[ 5.163713] DMAR: No ATSR found
[ 5.163714] DMAR: No SATC found
[ 5.163715] DMAR: IOMMU feature fl1gp_support inconsistent
[ 5.163716] DMAR: IOMMU feature pgsel_inv inconsistent
[ 5.163717] DMAR: IOMMU feature nwfs inconsistent
[ 5.163718] DMAR: IOMMU feature pasid inconsistent
[ 5.163719] DMAR: IOMMU feature eafs inconsistent
[ 5.163720] DMAR: IOMMU feature prs inconsistent
[ 5.163720] DMAR: IOMMU feature nest inconsistent
[ 5.163721] DMAR: IOMMU feature mts inconsistent
[ 5.163722] DMAR: IOMMU feature sc_support inconsistent
[ 5.163722] DMAR: IOMMU feature dev_iotlb_support inconsistent
[ 5.163724] DMAR: dmar0: Using Queued invalidation
[ 5.163727] DMAR: dmar1: Using Queued invalidation
[ 5.163757] Trying to unpack rootfs image as initramfs...
[ 5.164027] pci 0000:00:02.0: Adding to iommu group 0
[ 5.164070] pci 0000:00:00.0: Adding to iommu group 1
[ 5.164080] pci 0000:00:04.0: Adding to iommu group 2
[ 5.164098] pci 0000:00:14.0: Adding to iommu group 3
[ 5.164107] pci 0000:00:14.2: Adding to iommu group 3
[ 5.164124] pci 0000:00:15.0: Adding to iommu group 4
[ 5.164133] pci 0000:00:15.1: Adding to iommu group 4
[ 5.164146] pci 0000:00:16.0: Adding to iommu group 5
[ 5.164164] pci 0000:00:1c.0: Adding to iommu group 6
[ 5.164176] pci 0000:00:1c.4: Adding to iommu group 7
[ 5.164187] pci 0000:00:1d.0: Adding to iommu group 8
[ 5.164210] pci 0000:00:1f.0: Adding to iommu group 9
[ 5.164221] pci 0000:00:1f.2: Adding to iommu group 9
[ 5.164231] pci 0000:00:1f.3: Adding to iommu group 9
[ 5.164241] pci 0000:00:1f.4: Adding to iommu group 9
[ 5.164253] pci 0000:01:00.0: Adding to iommu group 10
[ 5.164264] pci 0000:02:00.0: Adding to iommu group 11
[ 5.164275] pci 0000:02:01.0: Adding to iommu group 12
[ 5.164286] pci 0000:02:02.0: Adding to iommu group 13
[ 5.164292] pci 0000:39:00.0: Adding to iommu group 13
[ 5.164305] pci 0000:3a:00.0: Adding to iommu group 14
[ 5.164316] pci 0000:3b:00.0: Adding to iommu group 15
[ 5.165458] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 5.165461] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 5.165462] software IO TLB: mapped [mem 0x000000005e264000-0x0000000062264000] (64MB)
[ 5.165531] sgx: EPC section 0x70200000-0x75f7ffff
[ 5.166406] Initialise system trusted keyrings
[ 5.166417] Key type blacklist registered
[ 5.166474] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 5.166484] zbud: loaded
[ 5.166578] fuse: init (API version 7.39)
[ 5.166710] integrity: Platform Keyring initialized
[ 5.166714] integrity: Machine keyring initialized
[ 5.166715] Key type asymmetric registered
[ 5.166717] Asymmetric key parser 'x509' registered
[ 5.297299] Freeing initrd memory: 60468K
[ 5.301405] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 5.301434] io scheduler mq-deadline registered
[ 5.302705] pcieport 0000:02:01.0: enabling device (0006 -> 0007)
[ 5.302996] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.303011] efifb: probing for efifb
[ 5.303027] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 5.303029] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 5.303030] efifb: scrolling: redraw
[ 5.303031] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 5.303109] Console: switching to colour frame buffer device 200x56
[ 5.306578] fb0: EFI VGA frame buffer device
[ 5.308533] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.308535] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 5.308673] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.309154] hpet_acpi_add: no address or irqs in _CRS
[ 5.309173] Linux agpgart interface v0.103
[ 5.321045] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[ 5.360121] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 5.360396] i8042: Warning: Keylock active
[ 5.362622] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.362628] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.362825] mousedev: PS/2 mouse device common for all mice
[ 5.362866] rtc_cmos 00:01: RTC can wake from S4
[ 5.363677] rtc_cmos 00:01: registered as rtc0
[ 5.363836] rtc_cmos 00:01: setting system clock to 2024-01-19T12:15:31 UTC (1705666531)
[ 5.363863] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 5.364110] intel_pstate: Intel P-state driver initializing
[ 5.364367] intel_pstate: HWP enabled
[ 5.364412] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 5.365951] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.382432] NET: Registered PF_INET6 protocol family
[ 5.387972] Segment Routing with IPv6
[ 5.387987] In-situ OAM (IOAM) with IPv6
[ 5.388018] mip6: Mobile IPv6
[ 5.388022] NET: Registered PF_PACKET protocol family
[ 5.388084] mpls_gso: MPLS GSO support
[ 5.388406] microcode: Current revision: 0x000000f4
[ 5.388409] microcode: Updated early from: 0x000000f0
[ 5.388491] IPI shorthand broadcast: enabled
[ 5.389943] sched_clock: Marking stable (5384002282, 5820600)->(5493284337, -103461455)
[ 5.390118] registered taskstats version 1
[ 5.390215] Loading compiled-in X.509 certificates
[ 5.410241] Loaded X.509 cert 'Build time autogenerated kernel key: 45375d97a88689d31f3746ef65fc2b509cef42c6'
[ 5.412443] Key type .fscrypt registered
[ 5.412446] Key type fscrypt-provisioning registered
[ 5.421005] cryptd: max_cpu_qlen set to 1000
[ 5.429220] AVX2 version of gcm_enc/dec engaged.
[ 5.429254] AES CTR mode by8 optimization enabled
[ 5.453274] Key type encrypted registered
[ 5.453278] AppArmor: AppArmor sha1 policy hashing enabled
[ 5.453506] integrity: Loading X.509 certificate: UEFI:db
[ 5.453526] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[ 5.453527] integrity: Loading X.509 certificate: UEFI:db
[ 5.453544] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 5.453545] integrity: Loading X.509 certificate: UEFI:db
[ 5.453558] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 5.453874] ima: Allocated hash algorithm: sha256
[ 5.491991] ima: No architecture policies found
[ 5.492014] evm: Initialising EVM extended attributes:
[ 5.492015] evm: security.selinux
[ 5.492017] evm: security.SMACK64 (disabled)
[ 5.492018] evm: security.SMACK64EXEC (disabled)
[ 5.492018] evm: security.SMACK64TRANSMUTE (disabled)
[ 5.492019] evm: security.SMACK64MMAP (disabled)
[ 5.492020] evm: security.apparmor
[ 5.492021] evm: security.ima
[ 5.492021] evm: security.capability
[ 5.492022] evm: HMAC attrs: 0x1
[ 5.613514] RAS: Correctable Errors collector initialized.
[ 5.613587] clk: Disabling unused clocks
[ 5.614475] Freeing unused decrypted memory: 2028K
[ 5.614877] Freeing unused kernel image (initmem) memory: 3992K
[ 5.630127] Write protecting the kernel read-only data: 28672k
[ 5.630694] Freeing unused kernel image (rodata/data gap) memory: 1636K
[ 5.674643] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 5.674645] x86/mm: Checking user space page tables
[ 5.716804] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 5.716808] Run /init as init process
[ 5.716810] with arguments:
[ 5.716811] /init
[ 5.716811] with environment:
[ 5.716812] HOME=/
[ 5.716813] TERM=linux
[ 5.716813] BOOT_IMAGE=/vmlinuz-6.7-amd64
[ 5.901869] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ 5.914076] hid: raw HID events driver (C) Jiri Kosina
[ 5.948726] ACPI: battery: Slot [BAT0] (battery present)
[ 5.950745] ACPI: bus type USB registered
[ 5.950776] usbcore: registered new interface driver usbfs
[ 5.950786] usbcore: registered new interface driver hub
[ 5.950798] usbcore: registered new device driver usb
[ 5.952989] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 5.953042] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.953111] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000
[ 5.953171] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]
[ 5.953406] pci 0000:00:1f.1: Adding to iommu group 16
[ 5.956727] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 5.957041] platform idma64.0: Adding to iommu group 16
[ 5.957169] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 5.957445] platform i2c_designware.0: Adding to iommu group 17
[ 5.974186] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 5.974381] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 5.974404] platform idma64.1: Adding to iommu group 18
[ 5.974553] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 5.974591] platform i2c_designware.1: Adding to iommu group 19
[ 5.982071] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.982079] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 5.983222] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 5.984172] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.984177] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 5.984181] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 5.984219] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 5.984221] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.984224] usb usb1: Product: xHCI Host Controller
[ 5.984225] usb usb1: Manufacturer: Linux 6.7-amd64 xhci-hcd
[ 5.984227] usb usb1: SerialNumber: 0000:00:14.0
[ 5.984746] hub 1-0:1.0: USB hub found
[ 5.984762] hub 1-0:1.0: 12 ports detected
[ 5.988780] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 5.988784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.988786] usb usb2: Product: xHCI Host Controller
[ 5.988788] usb usb2: Manufacturer: Linux 6.7-amd64 xhci-hcd
[ 5.988789] usb usb2: SerialNumber: 0000:00:14.0
[ 5.988958] hub 2-0:1.0: USB hub found
[ 5.988970] hub 2-0:1.0: 6 ports detected
[ 5.990259] usb: port power management may be unreliable
[ 5.990711] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 5.990716] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 5.991897] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 5.992149] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 5.992152] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 5.992155] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 5.992189] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 5.992192] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.992194] usb usb3: Product: xHCI Host Controller
[ 5.992196] usb usb3: Manufacturer: Linux 6.7-amd64 xhci-hcd
[ 5.992197] usb usb3: SerialNumber: 0000:39:00.0
[ 5.992308] hub 3-0:1.0: USB hub found
[ 5.992317] hub 3-0:1.0: 2 ports detected
[ 5.992742] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 5.992745] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.992747] usb usb4: Product: xHCI Host Controller
[ 5.992749] usb usb4: Manufacturer: Linux 6.7-amd64 xhci-hcd
[ 5.992751] usb usb4: SerialNumber: 0000:39:00.0
[ 5.992850] hub 4-0:1.0: USB hub found
[ 5.992859] hub 4-0:1.0: 2 ports detected
[ 6.001298] ACPI: bus type drm_connector registered
[ 6.163044] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input2
[ 6.163113] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input3
[ 6.163170] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 6.170673] tsc: Refined TSC clocksource calibration: 2904.000 MHz
[ 6.170681] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
[ 6.170917] clocksource: Switched to clocksource tsc
[ 6.180089] nvme nvme0: pci function 0000:3b:00.0
[ 6.199297] nvme nvme0: 4/0/0 default/read/poll queues
[ 6.204698] nvme0n1: p1 p2 p3 p4
[ 6.245910] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 6.245926] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 6.251851] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 6.251889] device-mapper: uevent: version 1.0.3
[ 6.252078] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 6.398220] usb 3-1: New USB device found, idVendor=2109, idProduct=2820, bcdDevice=30.03
[ 6.398243] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.398255] usb 3-1: Product: USB2.0 Hub
[ 6.398263] usb 3-1: Manufacturer: VIA Labs, Inc.
[ 6.401774] hub 3-1:1.0: USB hub found
[ 6.402046] hub 3-1:1.0: 5 ports detected
[ 6.402678] usb 1-1: New USB device found, idVendor=0bf8, idProduct=101e, bcdDevice= 1.09
[ 6.402700] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.402709] usb 1-1: Product: Fujitsu Keyboard
[ 6.402717] usb 1-1: Manufacturer: Fujitsu
[ 6.433062] input: Fujitsu Fujitsu Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0BF8:101E.0002/input/input5
[ 6.490653] hid-generic 0003:0BF8:101E.0002: input,hidraw1: USB HID v1.10 Keyboard [Fujitsu Fujitsu Keyboard] on usb-0000:00:14.0-1/input0
[ 6.499143] input: Fujitsu Fujitsu Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0BF8:101E.0003/input/input6
[ 6.529401] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[ 6.533897] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[ 6.549884] usb 4-1: New USB device found, idVendor=2109, idProduct=0820, bcdDevice=30.03
[ 6.549903] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.549912] usb 4-1: Product: USB3.1 Hub
[ 6.549919] usb 4-1: Manufacturer: VIA Labs, Inc.
[ 6.552847] hub 4-1:1.0: USB hub found
[ 6.553500] hub 4-1:1.0: 4 ports detected
[ 6.558137] input: Fujitsu Fujitsu Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0BF8:101E.0003/input/input7
[ 6.558515] hid-generic 0003:0BF8:101E.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Fujitsu Fujitsu Keyboard] on usb-0000:00:14.0-1/input1
[ 6.558667] usbcore: registered new interface driver usbhid
[ 6.558677] usbhid: USB HID core driver
[ 6.686874] usb 1-2: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[ 6.686899] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.686910] usb 1-2: Product: USB Optical Mouse
[ 6.686919] usb 1-2: Manufacturer: Logitech
[ 6.691887] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C077.0004/input/input8
[ 6.692216] hid-generic 0003:046D:C077.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0
[ 6.818146] usb 1-3: new full-speed USB device number 4 using xhci_hcd
[ 6.968213] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[ 6.968239] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.098079] usb 1-4: new full-speed USB device number 5 using xhci_hcd
[ 7.138117] usb 3-1.1: new full-speed USB device number 3 using xhci_hcd
[ 7.249134] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[ 7.249163] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 7.249175] usb 1-4: Product: Touchscreen
[ 7.249183] usb 1-4: Manufacturer: ELAN
[ 7.262726] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input9
[ 7.262787] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input10
[ 7.262809] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input11
[ 7.262870] hid-generic 0003:04F3:2234.0005: input,hiddev1,hidraw4: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 7.294650] usb 3-1.1: New USB device found, idVendor=06c4, idProduct=c412, bcdDevice= 0.06
[ 7.294672] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.294682] usb 3-1.1: Product: DELL DA300
[ 7.294689] usb 3-1.1: Manufacturer: Bizlink
[ 7.294696] usb 3-1.1: SerialNumber: MCU Ver0006
[ 7.308232] hid-generic 0003:06C4:C412.0006: hiddev2,hidraw5: USB HID v1.11 Device [Bizlink DELL DA300] on usb-0000:39:00.0-1.1/input0
[ 7.389974] usb 1-5: new high-speed USB device number 6 using xhci_hcd
[ 7.599265] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[ 7.599290] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 7.599302] usb 1-5: Product: Integrated_Webcam_HD
[ 7.599310] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[ 8.414385] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd
[ 8.434955] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[ 8.434978] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 8.434987] usb 4-1.2: Product: USB 10/100/1000 LAN
[ 8.434994] usb 4-1.2: Manufacturer: Realtek
[ 8.435000] usb 4-1.2: SerialNumber: 001000001
[ 8.449635] usbcore: registered new device driver r8152-cfgselector
[ 8.535005] r8152-cfgselector 4-1.2: reset SuperSpeed USB device number 3 using xhci_hcd
[ 8.560039] r8152 4-1.2:1.0: firmware: direct-loading firmware rtl_nic/rtl8153b-2.fw
[ 8.560098] r8152 4-1.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr 18:db:f2:2d:cc:f3
[ 8.562628] r8152 4-1.2:1.0: load rtl8153b-2 v2 04/27/23 successfully
[ 8.610249] r8152 4-1.2:1.0 eth0: v1.12.13
[ 8.610371] usbcore: registered new interface driver r8152
[ 8.628791] usbcore: registered new interface driver cdc_ether
[ 8.633613] usbcore: registered new interface driver r8153_ecm
[ 8.661130] r8152 4-1.2:1.0 enx18dbf22dccf3: renamed from eth0
[ 12.612396] PM: Image not found (code -22)
[ 12.785277] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none.
[ 12.828218] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 12.902768] systemd[1]: Inserted module 'autofs4'
[ 12.941965] systemd[1]: systemd 255.2-4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 12.941981] systemd[1]: Detected architecture x86-64.
[ 12.943181] systemd[1]: Hostname set to <abreu>.
[ 13.119736] systemd[1]: Queued start job for default target graphical.target.
[ 13.142916] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 13.143242] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 13.143511] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.
[ 13.143777] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 13.143988] systemd[1]: Created slice user.slice - User and Session Slice.
[ 13.144055] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 13.144102] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 13.144274] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 13.144300] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[ 13.144306] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8...
[ 13.144313] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5...
[ 13.144319] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653...
[ 13.144338] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 13.144354] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 13.144365] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 13.144377] systemd[1]: Reached target slices.target - Slice Units.
[ 13.144397] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 13.145558] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 13.145653] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 13.145711] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 13.145840] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 13.145964] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 13.145994] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 13.146229] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 13.146323] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 13.147326] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 13.148018] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 13.149122] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 13.153406] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 13.156564] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 13.158933] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 13.160325] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 13.163938] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 13.165704] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 13.168962] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 13.178170] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 13.179544] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 13.179629] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 13.182448] pstore: Using crash dump compression: deflate
[ 13.186067] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 13.189317] pstore: Registered efi_pstore as persistent store backend
[ 13.189850] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 13.189876] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 13.191196] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 13.191275] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 13.195693] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 13.199452] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 13.199703] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 13.199830] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 13.199976] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 13.200303] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 13.200660] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 13.201027] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 13.201219] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 13.201666] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 13.201853] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 13.202202] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 13.202383] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 13.202776] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 13.202957] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 13.203365] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 13.203624] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 13.206018] loop: module loaded
[ 13.206779] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 13.208173] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 13.214062] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 13.214549] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 13.214756] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 13.215009] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 13.216823] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 13.218308] systemd-journald[434]: Collecting audit messages is disabled.
[ 13.220025] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 13.226883] lp: driver loaded but no devices found
[ 13.232891] ppdev: user-space parallel port driver
[ 13.239864] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none.
[ 13.241534] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 13.242290] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 13.242340] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 13.244133] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 13.244178] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 13.251343] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 13.251555] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 13.253335] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 13.260300] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 13.266075] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 13.273302] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 13.278405] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 13.278570] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ 13.280902] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[ 13.283640] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 13.297820] systemd[1]: Started systemd-journald.service - Journal Service.
[ 13.314612] systemd-journald[434]: Received client request to flush runtime journal.
[ 13.326624] systemd-journald[434]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/system.journal: Journal file uses a different sequence number ID, rotating.
[ 13.326629] systemd-journald[434]: Rotating system journal.
[ 13.548666] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13
[ 13.550008] ACPI: button: Lid Switch [LID0]
[ 13.550070] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input14
[ 13.551073] ACPI: AC: AC Adapter [AC] (on-line)
[ 13.558628] Consider using thermal netlink events interface
[ 13.564862] intel_pmc_core INT33A1:00: initialized
[ 13.567272] input: Intel HID events as /devices/platform/INT33D5:00/input/input15
[ 13.604550] ACPI: button: Power Button [PBTN]
[ 13.604624] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input16
[ 13.606064] intel-hid INT33D5:00: platform supports 5 button array
[ 13.610287] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input17
[ 13.610349] ACPI: button: Sleep Button [SBTN]
[ 13.610408] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input18
[ 13.610510] ACPI: button: Power Button [PWRF]
[ 13.614188] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input19
[ 13.615619] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input22
[ 13.623704] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 13.633273] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input20
[ 13.640111] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 13.651111] intel_rapl_common: Found RAPL domain package
[ 13.651116] intel_rapl_common: Found RAPL domain dram
[ 13.688905] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS
[ 13.721809] mc: Linux media interface: v0.10
[ 13.761179] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 13.789915] input: PC Speaker as /devices/platform/pcspkr/input/input24
[ 13.793064] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input25
[ 13.793390] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input26
[ 13.793566] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input27
[ 13.794019] videodev: Linux video capture interface: v2.00
[ 13.812667] hid-multitouch 0003:04F3:2234.0005: input,hiddev1,hidraw4: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 13.831665] iTCO_vendor_support: vendor-support=0
[ 13.881659] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 13.904360] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 13.904801] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 13.904861] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.906575] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 13.906802] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 13.907002] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 13.907205] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 13.907405] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 13.913933] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 13.915818] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 13.974066] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 13.974072] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 13.974074] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 13.974075] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 13.974076] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 13.974078] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 13.975691] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input29
[ 14.030620] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[ 14.031145] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none.
[ 14.187691] usbcore: registered new interface driver uvcvideo
[ 14.302443] intel_rapl_common: Found RAPL domain package
[ 14.302447] intel_rapl_common: Found RAPL domain core
[ 14.302448] intel_rapl_common: Found RAPL domain uncore
[ 14.302450] intel_rapl_common: Found RAPL domain dram
[ 14.302451] intel_rapl_common: Found RAPL domain psys
[ 14.720626] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 14.721580] Console: switching to colour dummy device 80x25
[ 14.721611] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 14.721657] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 14.730436] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 14.731079] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[ 14.731594] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 14.768719] Bluetooth: Core ver 2.22
[ 14.768744] NET: Registered PF_BLUETOOTH protocol family
[ 14.768746] Bluetooth: HCI device and connection manager initialized
[ 14.768750] Bluetooth: HCI socket layer initialized
[ 14.768752] Bluetooth: L2CAP socket layer initialized
[ 14.768756] Bluetooth: SCO socket layer initialized
[ 14.777782] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 14.809040] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 14.809494] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 14.809512] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 14.814684] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 14.872426] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 14.876788] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0
[ 14.888574] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.890105] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input30
[ 14.890238] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 14.890807] i915 display info: display version: 9
[ 14.890810] i915 display info: cursor_needs_physical: no
[ 14.890811] i915 display info: has_cdclk_crawl: no
[ 14.890812] i915 display info: has_cdclk_squash: no
[ 14.890813] i915 display info: has_ddi: yes
[ 14.890814] i915 display info: has_dp_mst: yes
[ 14.890816] i915 display info: has_dsb: no
[ 14.890817] i915 display info: has_fpga_dbg: yes
[ 14.890818] i915 display info: has_gmch: no
[ 14.890819] i915 display info: has_hotplug: yes
[ 14.890820] i915 display info: has_hti: no
[ 14.890821] i915 display info: has_ipc: yes
[ 14.890822] i915 display info: has_overlay: no
[ 14.890823] i915 display info: has_psr: yes
[ 14.890824] i915 display info: has_psr_hw_tracking: yes
[ 14.890825] i915 display info: overlay_needs_physical: no
[ 14.890826] i915 display info: supports_tv: no
[ 14.890827] i915 display info: has_hdcp: yes
[ 14.890828] i915 display info: has_dmc: yes
[ 14.890829] i915 display info: has_dsc: no
[ 14.891714] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 14.899009] audit: type=1400 audit(1705666541.031:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=670 comm="apparmor_parser"
[ 14.899380] audit: type=1400 audit(1705666541.031:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=671 comm="apparmor_parser"
[ 14.899385] audit: type=1400 audit(1705666541.031:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=671 comm="apparmor_parser"
[ 14.903191] audit: type=1400 audit(1705666541.035:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=675 comm="apparmor_parser"
[ 14.903197] audit: type=1400 audit(1705666541.035:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=675 comm="apparmor_parser"
[ 14.903199] audit: type=1400 audit(1705666541.035:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=675 comm="apparmor_parser"
[ 14.904763] audit: type=1400 audit(1705666541.035:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=672 comm="apparmor_parser"
[ 14.904770] audit: type=1400 audit(1705666541.035:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=672 comm="apparmor_parser"
[ 14.904772] audit: type=1400 audit(1705666541.035:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=672 comm="apparmor_parser"
[ 14.904774] audit: type=1400 audit(1705666541.035:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=672 comm="apparmor_parser"
[ 14.938183] usbcore: registered new interface driver btusb
[ 14.941259] bluetooth hci0: firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
[ 14.941479] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 14.941481] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 14.961032] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 14.965601] fbcon: i915drmfb (fb0) is primary device
[ 14.965867] i915 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[ 15.084496] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2)
[ 15.084499] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 15.084511] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2)
[ 15.084521] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2)
[ 15.084528] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2)
[ 15.087064] ath10k_pci 0000:3a:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-6.bin
[ 15.088873] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 15.088876] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 15.089240] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00288- api 6 features wowlan,ignore-otp,mfp crc32 bf907c7c
[ 15.114535] Console: switching to colour frame buffer device 200x56
[ 15.153226] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 15.155662] ath10k_pci 0000:3a:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin
[ 15.158562] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[ 15.254269] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 15.254274] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 15.254275] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 15.254277] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 15.254278] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 15.254282] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 15.254284] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 15.254285] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 15.260023] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 15.300223] bluetooth hci0: firmware: direct-loading firmware qca/nvm_usb_00000302.bin
[ 15.300246] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 15.331523] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 15.341648] ath: EEPROM regdomain: 0x6c
[ 15.341650] ath: EEPROM indicates we should expect a direct regpair map
[ 15.341652] ath: Country alpha2 being used: 00
[ 15.341652] ath: Regpair used: 0x6c
[ 15.345818] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 15.757223] NET: Registered PF_QIPCRTR protocol family
[ 15.873382] r8152 4-1.2:1.0 enx18dbf22dccf3: carrier on
[ 16.049992] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 16.050060] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[ 16.050119] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[ 16.050173] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34
[ 16.050221] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input35
[ 19.375624] rfkill: input handler disabled
[ 21.194149] wlp58s0: authenticate with 6c:f3:7f:10:ae:1a (local address=9c:b6:d0:d1:6a:b1)
[ 21.194154] wlp58s0: send auth to 6c:f3:7f:10:ae:1a (try 1/3)
[ 21.200974] wlp58s0: authenticated
[ 21.201123] wlp58s0: VHT capa missing/short, disabling VHT/HE/EHT
[ 21.201833] wlp58s0: associate with 6c:f3:7f:10:ae:1a (try 1/3)
[ 21.212666] wlp58s0: RX AssocResp from 6c:f3:7f:10:ae:1a (capab=0x401 status=0 aid=1)
[ 21.215146] wlp58s0: associated
[ 21.307789] PPP generic driver version 2.4.2
[ 21.310713] NET: Registered PF_PPPOX protocol family
[ 21.325698] l2tp_core: L2TP core driver, V2.0
[ 21.328345] l2tp_netlink: L2TP netlink interface
[ 21.331617] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 21.341597] Initializing XFRM netlink socket
[ 21.352219] IPsec XFRM device driver
[ 23.654362] systemd-journald[434]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/user-5272.journal: Journal file uses a different sequence number ID, rotating.
[ 24.049182] rfkill: input handler enabled
[ 28.677929] rfkill: input handler disabled
[ 59.095264] wlp58s0: deauthenticating from 6c:f3:7f:10:ae:1a by local choice (Reason: 3=DEAUTH_LEAVING)
[ 99.711230] PM: suspend entry (deep)
[ 99.716031] Filesystems sync: 0.004 seconds
[ 99.716150] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[ 99.716253] (NULL device *): firmware: direct-loading firmware regulatory.db
[ 99.716268] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[ 99.716298] (NULL device *): firmware: direct-loading firmware qca/nvm_usb_00000302.bin
[ 99.716311] (NULL device *): firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
[ 99.718635] Freezing user space processes
[ 99.720764] Freezing user space processes completed (elapsed 0.002 seconds)
[ 99.720768] OOM killer disabled.
[ 99.720769] Freezing remaining freezable tasks
[ 99.722054] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 99.722101] printk: Suspending console(s) (use no_console_suspend to debug)
[ 100.285178] ACPI: EC: interrupt blocked
[ 100.319908] ACPI: PM: Preparing to enter system sleep state S3
[ 100.331793] ACPI: EC: event blocked
[ 100.331798] ACPI: EC: EC stopped
[ 100.331800] ACPI: PM: Saving platform NVS memory
[ 100.335224] Disabling non-boot CPUs ...
[ 100.337412] smpboot: CPU 1 is now offline
[ 100.341065] smpboot: CPU 2 is now offline
[ 100.346441] smpboot: CPU 3 is now offline
[ 100.353086] ACPI: PM: Low-level resume complete
[ 100.353129] ACPI: EC: EC started
[ 100.353129] ACPI: PM: Restoring platform NVS memory
[ 100.355219] Enabling non-boot CPUs ...
[ 100.355244] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 100.355954] CPU1 is up
[ 100.355972] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 100.356698] CPU2 is up
[ 100.356716] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 100.357371] CPU3 is up
[ 100.360217] ACPI: PM: Waking up from system sleep state S3
[ 100.668380] ACPI: EC: interrupt unblocked
[ 100.668598] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 100.668606] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
[ 100.668643] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 100.690996] DMAR: DRHD: handling fault status reg 2
[ 100.691001] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
[ 100.756870] ACPI: EC: event unblocked
[ 100.758124] xhci_hcd 0000:39:00.0: xHC error in resume, USBSTS 0x411, Reinit
[ 100.758129] usb usb3: root hub lost power or was reset
[ 100.758131] usb usb4: root hub lost power or was reset
[ 100.768819] nvme nvme0: 4/0/0 default/read/poll queues
[ 100.788891] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 100.791478] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 100.798652] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 101.058430] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[ 101.214521] usb 1-2: reset low-speed USB device number 3 using xhci_hcd
[ 101.338567] usb 4-1: reset SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[ 101.630655] usb 1-3: reset full-speed USB device number 4 using xhci_hcd
[ 101.906544] usb 1-4: reset full-speed USB device number 5 using xhci_hcd
[ 101.966492] usb 3-1.1: reset full-speed USB device number 3 using xhci_hcd
[ 102.182536] usb 1-5: reset high-speed USB device number 6 using xhci_hcd
[ 102.598644] usb 1-1: reset low-speed USB device number 2 using xhci_hcd
[ 102.990582] r8152-cfgselector 4-1.2: reset SuperSpeed USB device number 3 using xhci_hcd
[ 103.013516] r8152 4-1.2:1.0: skip request firmware
[ 103.013637] r8152 4-1.2:1.0 enx18dbf22dccf3: Using pass-thru MAC addr 18:db:f2:2d:cc:f3
[ 103.016440] r8152 4-1.2:1.0: load rtl8153b-2 v2 04/27/23 successfully
[ 103.056663] OOM killer enabled.
[ 103.056665] Restarting tasks ...
[ 103.056737] pci_bus 0000:02: Allocating resources
[ 103.056759] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 103.056769] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 103.056773] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 103.056778] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 103.056781] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 103.058855] pci_bus 0000:02: Allocating resources
[ 103.058875] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 103.058888] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 103.058892] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 103.058897] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 103.058900] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 103.059435] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 103.060638] done.
[ 103.060678] random: crng reseeded on system resumption
[ 103.150372] PM: suspend exit
[ 103.211747] Process accounting resumed
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`
2024-01-19 12:59 Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0` Paul Menzel
@ 2024-01-19 15:11 ` Jörg Rödel
2024-01-19 17:57 ` Christian A. Ehrhardt
2024-01-22 12:53 ` Baolu Lu
2 siblings, 0 replies; 8+ messages in thread
From: Jörg Rödel @ 2024-01-19 15:11 UTC (permalink / raw)
To: Paul Menzel; +Cc: Will Deacon, iommu, linux-kernel, Lu Baolu
Adding Lu Baolu, Intel IOMMU maintainer.
Baolu, could you please have a look?
On Fri, Jan 19, 2024 at 01:59:29PM +0100, Paul Menzel wrote:
> Dear Linux folks,
>
>
> On a Dell XPS 13 9360 Linux 6.6.8, 6.6.11 and 6.7 (and earlier versions) log
> the lines below when resuming from ACPI S3 (deep):
>
> [ 0.000000] Linux version 6.7-amd64 (debian-kernel@lists.debian.org)
> (x86_64-linux-gnu-gcc-13 (Debian 13.2.0-9) 13.2.0, GNU ld (GNU Binutils for
> Debian) 2.41.50.20231227) #1 SMP PREEMPT_DYNAMIC Debian 6.7-1~exp1
> (2024-01-08)
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7-amd64
> root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer
> mem_sleep_default=deep log_buf_len=8M
> […]
> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
> […]
> [ 99.711230] PM: suspend entry (deep)
> […]
> [ 99.722101] printk: Suspending console(s) (use no_console_suspend to
> debug)
> [ 100.285178] ACPI: EC: interrupt blocked
> [ 100.319908] ACPI: PM: Preparing to enter system sleep state S3
> [ 100.331793] ACPI: EC: event blocked
> [ 100.331798] ACPI: EC: EC stopped
> [ 100.331800] ACPI: PM: Saving platform NVS memory
> [ 100.335224] Disabling non-boot CPUs ...
> [ 100.337412] smpboot: CPU 1 is now offline
> [ 100.341065] smpboot: CPU 2 is now offline
> [ 100.346441] smpboot: CPU 3 is now offline
> [ 100.353086] ACPI: PM: Low-level resume complete
> [ 100.353129] ACPI: EC: EC started
> [ 100.353129] ACPI: PM: Restoring platform NVS memory
> [ 100.355219] Enabling non-boot CPUs ...
> [ 100.355244] smpboot: Booting Node 0 Processor 1 APIC 0x2
> [ 100.355954] CPU1 is up
> [ 100.355972] smpboot: Booting Node 0 Processor 2 APIC 0x1
> [ 100.356698] CPU2 is up
> [ 100.356716] smpboot: Booting Node 0 Processor 3 APIC 0x3
> [ 100.357371] CPU3 is up
> [ 100.360217] ACPI: PM: Waking up from system sleep state S3
> [ 100.668380] ACPI: EC: interrupt unblocked
> [ 100.668598] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS
> workaround enabled
> [ 100.668606] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS
> workaround enabled
> [ 100.668643] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS
> workaround enabled
> [ 100.690996] DMAR: DRHD: handling fault status reg 2
> [ 100.691001] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index
> 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
>
> But I am unable to find the device f0:1f.0:
>
> $ lspci -nn
> 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen
> Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
> 00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics
> 620 [8086:5916] (rev 02)
> 00:04.0 Signal processing controller [1180]: Intel Corporation Xeon
> E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [8086:1903]
> (rev 02)
> 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB
> 3.0 xHCI Controller [8086:9d2f] (rev 21)
> 00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise
> Point-LP Thermal subsystem [8086:9d31] (rev 21)
> 00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise
> Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
> 00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise
> Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
> 00:16.0 Communication controller [0780]: Intel Corporation Sunrise
> Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
> 00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
> Express Root Port #1 [8086:9d10] (rev f1)
> 00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
> Express Root Port #5 [8086:9d14] (rev f1)
> 00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
> Express Root Port #9 [8086:9d18] (rev f1)
> 00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC
> Controller [8086:9d58] (rev 21)
> 00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC
> [8086:9d21] (rev 21)
> 00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio
> [8086:9d71] (rev 21)
> 00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus
> [8086:9d23] (rev 21)
> 01:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
> 02:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
> 02:01.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
> 02:02.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
> 39:00.0 USB controller [0c03]: Intel Corporation DSL6340 USB 3.1
> Controller [Alpine Ridge] [8086:15b5]
> 3a:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac
> Wireless Network Adapter [168c:003e] (rev 32)
> 3b:00.0 Non-Volatile memory controller [0108]: SK hynix PC300 NVMe Solid
> State Drive 512GB [1c5c:1284]
>
> As this is logged as an error, can this be fixed somehow?
>
>
> Kind regards,
>
> Paul
> [ 0.000000] Linux version 6.7-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-13 (Debian 13.2.0-9) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41.50.20231227) #1 SMP PREEMPT_DYNAMIC Debian 6.7-1~exp1 (2024-01-08)
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7-amd64 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000556aafff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000556ac000-0x00000000556acfff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000556ad000-0x0000000064df3fff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000064df4000-0x000000006517ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x000000006f872000-0x000000006fffefff] reserved
> [ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000785fffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000078600000-0x000000007c7fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004817fffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] APIC: Static calls initialized
> [ 0.000000] e820: update [mem 0x4ea13018-0x4ea23057] usable ==> usable
> [ 0.000000] e820: update [mem 0x4ea13018-0x4ea23057] usable ==> usable
> [ 0.000000] extended physical RAM map:
> [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
> [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
> [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000004ea13017] usable
> [ 0.000000] reserve setup_data: [mem 0x000000004ea13018-0x000000004ea23057] usable
> [ 0.000000] reserve setup_data: [mem 0x000000004ea23058-0x00000000556aafff] usable
> [ 0.000000] reserve setup_data: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
> [ 0.000000] reserve setup_data: [mem 0x00000000556ac000-0x00000000556acfff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000556ad000-0x0000000064df3fff] usable
> [ 0.000000] reserve setup_data: [mem 0x0000000064df4000-0x000000006517ffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
> [ 0.000000] reserve setup_data: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
> [ 0.000000] reserve setup_data: [mem 0x000000006f872000-0x000000006fffefff] reserved
> [ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable
> [ 0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000785fffff] usable
> [ 0.000000] reserve setup_data: [mem 0x0000000078600000-0x000000007c7fffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004817fffff] usable
> [ 0.000000] efi: EFI v2.4 by American Megatrends
> [ 0.000000] efi: ACPI=0x6518d000 ACPI 2.0=0x6518d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6f812000 ESRT=0x6fc86698 MEMATTR=0x6267a298 INITRD=0x5577da98 TPMEventLog=0x5577e018
> [ 0.000000] efi: Remove mem34: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
> [ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
> [ 0.000000] efi: Not removing mem35: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
> [ 0.000000] efi: Not removing mem36: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
> [ 0.000000] efi: Not removing mem37: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
> [ 0.000000] efi: Remove mem38: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
> [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
> [ 0.000000] secureboot: Secure boot disabled
> [ 0.000000] SMBIOS 3.0.0 present.
> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
> [ 0.000000] tsc: Detected 2900.000 MHz processor
> [ 0.000000] tsc: Detected 2899.886 MHz TSC
> [ 0.000678] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000681] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000688] last_pfn = 0x481800 max_arch_pfn = 0x400000000
> [ 0.000692] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
> [ 0.000694] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
> [ 0.001017] last_pfn = 0x78600 max_arch_pfn = 0x400000000
> [ 0.007382] esrt: Reserving ESRT space from 0x000000006fc86698 to 0x000000006fc866d0.
> [ 0.007386] Using GB pages for direct mapping
> [ 0.013936] printk: log_buf_len: 8388608 bytes
> [ 0.013937] printk: early log buf free: 125296(95%)
> [ 0.013938] RAMDISK: [mem 0x4ea24000-0x52530fff]
> [ 0.013942] ACPI: Early table checksum verification disabled
> [ 0.013945] ACPI: RSDP 0x000000006518D000 000024 (v02 DELL )
> [ 0.013949] ACPI: XSDT 0x000000006518D0C0 000104 (v01 DELL CBX3 01072009 AMI 00010013)
> [ 0.013954] ACPI: FACP 0x00000000651B2A40 00010C (v05 DELL CBX3 01072009 AMI 00010013)
> [ 0.013961] ACPI: DSDT 0x000000006518D258 0257E7 (v02 DELL CBX3 01072009 INTL 20160422)
> [ 0.013964] ACPI: FACS 0x000000006F86F180 000040
> [ 0.013966] ACPI: APIC 0x00000000651B2B50 000084 (v03 DELL CBX3 01072009 AMI 00010013)
> [ 0.013969] ACPI: FPDT 0x00000000651B2BD8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
> [ 0.013971] ACPI: FIDT 0x00000000651B2C20 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
> [ 0.013974] ACPI: MCFG 0x00000000651B2CD0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
> [ 0.013976] ACPI: HPET 0x00000000651B2D10 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
> [ 0.013979] ACPI: SSDT 0x00000000651B2D48 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
> [ 0.013981] ACPI: BOOT 0x00000000651B30A8 000028 (v01 DELL CBX3 01072009 AMI 00010013)
> [ 0.013984] ACPI: SSDT 0x00000000651B30D0 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
> [ 0.013986] ACPI: HPET 0x00000000651B43A0 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
> [ 0.013989] ACPI: SSDT 0x00000000651B43D8 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422)
> [ 0.013991] ACPI: UEFI 0x00000000651B5160 000042 (v01 00000000 00000000)
> [ 0.013994] ACPI: SSDT 0x00000000651B51A8 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
> [ 0.013996] ACPI: LPIT 0x00000000651B6088 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
> [ 0.013999] ACPI: SSDT 0x00000000651B6120 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
> [ 0.014001] ACPI: SSDT 0x00000000651B6288 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
> [ 0.014004] ACPI: SSDT 0x00000000651B6528 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
> [ 0.014006] ACPI: SSDT 0x00000000651B9530 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422)
> [ 0.014009] ACPI: DBGP 0x00000000651B9610 000034 (v01 INTEL 00000002 MSFT 0000005F)
> [ 0.014011] ACPI: DBG2 0x00000000651B9648 000054 (v00 INTEL 00000002 MSFT 0000005F)
> [ 0.014014] ACPI: SSDT 0x00000000651B96A0 0007DD (v02 INTEL UsbCTabl 00001000 INTL 20160422)
> [ 0.014016] ACPI: SSDT 0x00000000651B9E80 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
> [ 0.014019] ACPI: SLIC 0x00000000651C2378 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
> [ 0.014021] ACPI: NHLT 0x00000000651C24F0 00002D (v00 INTEL EDK2 00000002 01000013)
> [ 0.014024] ACPI: BGRT 0x00000000651C2520 000038 (v00 01072009 AMI 00010013)
> [ 0.014026] ACPI: TPM2 0x00000000651C2558 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
> [ 0.014029] ACPI: ASF! 0x00000000651C2590 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
> [ 0.014031] ACPI: DMAR 0x00000000651C2630 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
> [ 0.014033] ACPI: Reserving FACP table memory at [mem 0x651b2a40-0x651b2b4b]
> [ 0.014035] ACPI: Reserving DSDT table memory at [mem 0x6518d258-0x651b2a3e]
> [ 0.014035] ACPI: Reserving FACS table memory at [mem 0x6f86f180-0x6f86f1bf]
> [ 0.014036] ACPI: Reserving APIC table memory at [mem 0x651b2b50-0x651b2bd3]
> [ 0.014037] ACPI: Reserving FPDT table memory at [mem 0x651b2bd8-0x651b2c1b]
> [ 0.014037] ACPI: Reserving FIDT table memory at [mem 0x651b2c20-0x651b2ccb]
> [ 0.014038] ACPI: Reserving MCFG table memory at [mem 0x651b2cd0-0x651b2d0b]
> [ 0.014039] ACPI: Reserving HPET table memory at [mem 0x651b2d10-0x651b2d47]
> [ 0.014039] ACPI: Reserving SSDT table memory at [mem 0x651b2d48-0x651b30a0]
> [ 0.014040] ACPI: Reserving BOOT table memory at [mem 0x651b30a8-0x651b30cf]
> [ 0.014041] ACPI: Reserving SSDT table memory at [mem 0x651b30d0-0x651b439e]
> [ 0.014041] ACPI: Reserving HPET table memory at [mem 0x651b43a0-0x651b43d7]
> [ 0.014042] ACPI: Reserving SSDT table memory at [mem 0x651b43d8-0x651b515b]
> [ 0.014043] ACPI: Reserving UEFI table memory at [mem 0x651b5160-0x651b51a1]
> [ 0.014043] ACPI: Reserving SSDT table memory at [mem 0x651b51a8-0x651b6085]
> [ 0.014044] ACPI: Reserving LPIT table memory at [mem 0x651b6088-0x651b611b]
> [ 0.014045] ACPI: Reserving SSDT table memory at [mem 0x651b6120-0x651b6280]
> [ 0.014045] ACPI: Reserving SSDT table memory at [mem 0x651b6288-0x651b6526]
> [ 0.014046] ACPI: Reserving SSDT table memory at [mem 0x651b6528-0x651b9529]
> [ 0.014046] ACPI: Reserving SSDT table memory at [mem 0x651b9530-0x651b960a]
> [ 0.014047] ACPI: Reserving DBGP table memory at [mem 0x651b9610-0x651b9643]
> [ 0.014048] ACPI: Reserving DBG2 table memory at [mem 0x651b9648-0x651b969b]
> [ 0.014048] ACPI: Reserving SSDT table memory at [mem 0x651b96a0-0x651b9e7c]
> [ 0.014049] ACPI: Reserving SSDT table memory at [mem 0x651b9e80-0x651c2370]
> [ 0.014050] ACPI: Reserving SLIC table memory at [mem 0x651c2378-0x651c24ed]
> [ 0.014050] ACPI: Reserving NHLT table memory at [mem 0x651c24f0-0x651c251c]
> [ 0.014051] ACPI: Reserving BGRT table memory at [mem 0x651c2520-0x651c2557]
> [ 0.014052] ACPI: Reserving TPM2 table memory at [mem 0x651c2558-0x651c258b]
> [ 0.014052] ACPI: Reserving ASF! table memory at [mem 0x651c2590-0x651c262f]
> [ 0.014053] ACPI: Reserving DMAR table memory at [mem 0x651c2630-0x651c271f]
> [ 0.014179] No NUMA configuration found
> [ 0.014180] Faking a node at [mem 0x0000000000000000-0x00000004817fffff]
> [ 0.014188] NODE_DATA(0) allocated [mem 0x47f3d5000-0x47f3fffff]
> [ 0.014336] Zone ranges:
> [ 0.014337] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.014339] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.014340] Normal [mem 0x0000000100000000-0x00000004817fffff]
> [ 0.014341] Device empty
> [ 0.014342] Movable zone start for each node
> [ 0.014344] Early memory node ranges
> [ 0.014345] node 0: [mem 0x0000000000001000-0x0000000000057fff]
> [ 0.014346] node 0: [mem 0x0000000000059000-0x000000000009dfff]
> [ 0.014347] node 0: [mem 0x0000000000100000-0x00000000556aafff]
> [ 0.014348] node 0: [mem 0x00000000556ad000-0x0000000064df3fff]
> [ 0.014348] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
> [ 0.014349] node 0: [mem 0x0000000078000000-0x00000000785fffff]
> [ 0.014349] node 0: [mem 0x0000000100000000-0x00000004817fffff]
> [ 0.014351] Initmem setup node 0 [mem 0x0000000000001000-0x00000004817fffff]
> [ 0.014355] On node 0, zone DMA: 1 pages in unavailable ranges
> [ 0.014356] On node 0, zone DMA: 1 pages in unavailable ranges
> [ 0.014380] On node 0, zone DMA: 98 pages in unavailable ranges
> [ 0.016731] On node 0, zone DMA32: 2 pages in unavailable ranges
> [ 0.017085] On node 0, zone DMA32: 45579 pages in unavailable ranges
> [ 0.017557] On node 0, zone Normal: 31232 pages in unavailable ranges
> [ 0.017763] On node 0, zone Normal: 26624 pages in unavailable ranges
> [ 0.017770] Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff]
> [ 0.017956] ACPI: PM-Timer IO Port: 0x1808
> [ 0.017962] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.017963] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> [ 0.017964] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> [ 0.017965] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> [ 0.017991] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
> [ 0.017993] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.017995] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.017998] ACPI: Using ACPI (MADT) for SMP configuration information
> [ 0.017999] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [ 0.018005] e820: update [mem 0x62264000-0x623f0fff] usable ==> reserved
> [ 0.018015] TSC deadline timer available
> [ 0.018015] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.018030] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [ 0.018032] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
> [ 0.018033] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
> [ 0.018035] PM: hibernation: Registered nosave memory: [mem 0x4ea13000-0x4ea13fff]
> [ 0.018036] PM: hibernation: Registered nosave memory: [mem 0x4ea23000-0x4ea23fff]
> [ 0.018037] PM: hibernation: Registered nosave memory: [mem 0x556ab000-0x556abfff]
> [ 0.018038] PM: hibernation: Registered nosave memory: [mem 0x556ac000-0x556acfff]
> [ 0.018039] PM: hibernation: Registered nosave memory: [mem 0x62264000-0x623f0fff]
> [ 0.018041] PM: hibernation: Registered nosave memory: [mem 0x64df4000-0x6517ffff]
> [ 0.018041] PM: hibernation: Registered nosave memory: [mem 0x65180000-0x651c3fff]
> [ 0.018042] PM: hibernation: Registered nosave memory: [mem 0x651c4000-0x6f871fff]
> [ 0.018042] PM: hibernation: Registered nosave memory: [mem 0x6f872000-0x6fffefff]
> [ 0.018044] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff]
> [ 0.018045] PM: hibernation: Registered nosave memory: [mem 0x78600000-0x7c7fffff]
> [ 0.018046] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0xfdffffff]
> [ 0.018046] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
> [ 0.018047] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
> [ 0.018047] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [ 0.018048] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
> [ 0.018048] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.018049] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
> [ 0.018051] [mem 0x7c800000-0xfdffffff] available for PCI devices
> [ 0.018052] Booting paravirtualized kernel on bare hardware
> [ 0.018053] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
> [ 0.022551] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
> [ 0.022845] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288
> [ 0.022851] pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152
> [ 0.022853] pcpu-alloc: [0] 0 1 2 3
> [ 0.022869] Kernel command line: BOOT_IMAGE=/vmlinuz-6.7-amd64 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M
> [ 0.022934] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.7-amd64", will be passed to user space.
> [ 0.022968] random: crng init done
> [ 0.024480] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
> [ 0.025238] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
> [ 0.025306] Fallback order for Node 0: 0
> [ 0.025309] Built 1 zonelists, mobility grouping on. Total pages: 4026691
> [ 0.025310] Policy zone: Normal
> [ 0.025314] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
> [ 0.025320] software IO TLB: area num 4.
> [ 0.043419] Memory: 1616272K/16363068K available (16384K kernel code, 2365K rwdata, 10652K rodata, 3992K init, 3568K bss, 541684K reserved, 0K cma-reserved)
> [ 0.043600] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.043609] Kernel/User page tables isolation: enabled
> [ 0.043633] ftrace: allocating 43342 entries in 170 pages
> [ 0.051043] ftrace: allocated 170 pages with 4 groups
> [ 0.051666] Dynamic Preempt: voluntary
> [ 0.051693] rcu: Preemptible hierarchical RCU implementation.
> [ 0.051694] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
> [ 0.051695] Trampoline variant of Tasks RCU enabled.
> [ 0.051695] Rude variant of Tasks RCU enabled.
> [ 0.051695] Tracing variant of Tasks RCU enabled.
> [ 0.051696] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
> [ 0.051697] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> [ 0.054076] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
> [ 0.054293] rcu: srcu_init: Setting srcu_struct sizes based on contention.
> [ 0.054469] spurious 8259A interrupt: IRQ7.
> [ 0.054493] Console: colour dummy device 80x25
> [ 0.054495] printk: legacy console [tty0] enabled
> [ 0.054530] ACPI: Core revision 20230628
> [ 0.054670] hpet: HPET dysfunctional in PC10. Force disabled.
> [ 0.054671] APIC: Switch to symmetric I/O mode setup
> [ 0.054673] DMAR: Host address width 39
> [ 0.054674] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
> [ 0.054679] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
> [ 0.054681] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
> [ 0.054684] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
> [ 0.054686] DMAR: RMRR base: 0x00000064ec2000 end: 0x00000064ee1fff
> [ 0.054687] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff
> [ 0.054688] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
> [ 0.054689] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
> [ 0.054691] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
> [ 0.054692] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
> [ 0.054693] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
> [ 0.056312] DMAR-IR: Enabled IRQ remapping in x2apic mode
> [ 0.056314] x2apic enabled
> [ 0.056372] APIC: Switched APIC routing to: cluster x2apic
> [ 0.060236] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
> [ 0.060242] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
> [ 0.060272] CPU0: Thermal monitoring enabled (TM1)
> [ 0.060306] process: using mwait in idle threads
> [ 0.060308] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
> [ 0.060309] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
> [ 0.060321] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
> [ 0.060323] Spectre V2 : Mitigation: IBRS
> [ 0.060324] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
> [ 0.060325] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
> [ 0.060325] RETBleed: Mitigation: IBRS
> [ 0.060327] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
> [ 0.060328] Spectre V2 : User space: Mitigation: STIBP via prctl
> [ 0.060329] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
> [ 0.060336] MDS: Mitigation: Clear CPU buffers
> [ 0.060337] MMIO Stale Data: Mitigation: Clear CPU buffers
> [ 0.060341] SRBDS: Mitigation: Microcode
> [ 0.060346] GDS: Mitigation: Microcode
> [ 0.060352] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
> [ 0.060354] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [ 0.060355] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [ 0.060355] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
> [ 0.060356] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
> [ 0.060358] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
> [ 0.060359] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
> [ 0.060360] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
> [ 0.060362] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
> [ 0.064239] Freeing SMP alternatives memory: 36K
> [ 0.064239] pid_max: default: 32768 minimum: 301
> [ 0.064239] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity
> [ 0.064239] landlock: Up and running.
> [ 0.064239] Yama: disabled by default; enable with sysctl kernel.yama.*
> [ 0.064239] AppArmor: AppArmor initialized
> [ 0.064239] TOMOYO Linux initialized
> [ 0.064239] LSM support for eBPF active
> [ 0.064239] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
> [ 0.064239] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
> [ 0.064239] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
> [ 0.064239] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
> [ 0.064239] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
> [ 0.064239] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
> [ 0.064239] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
> [ 0.064239] ... version: 4
> [ 0.064239] ... bit width: 48
> [ 0.064239] ... generic registers: 4
> [ 0.064239] ... value mask: 0000ffffffffffff
> [ 0.064239] ... max period: 00007fffffffffff
> [ 0.064239] ... fixed-purpose events: 3
> [ 0.064239] ... event mask: 000000070000000f
> [ 0.064239] signal: max sigframe size: 2032
> [ 0.064239] Estimated ratio of average max frequency by base frequency (times 1024): 1235
> [ 0.064239] rcu: Hierarchical SRCU implementation.
> [ 0.064239] rcu: Max phase no-delay instances is 1000.
> [ 0.064239] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
> [ 0.064239] smp: Bringing up secondary CPUs ...
> [ 0.064239] smpboot: x86: Booting SMP configuration:
> [ 0.064239] .... node #0, CPUs: #1 #2 #3
> [ 0.064239] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
> [ 0.064239] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
> [ 0.064239] smp: Brought up 1 node, 4 CPUs
> [ 0.064239] smpboot: Max logical packages: 1
> [ 0.064239] smpboot: Total of 4 processors activated (23199.08 BogoMIPS)
> [ 0.084472] node 0 deferred pages initialised in 20ms
> [ 0.085524] devtmpfs: initialized
> [ 0.085524] x86/mm: Memory block size: 128MB
> [ 0.085540] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes)
> [ 0.085540] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes)
> [ 0.090097] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
> [ 0.090105] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
> [ 0.090149] pinctrl core: initialized pinctrl subsystem
> [ 0.090646] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> [ 0.090881] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
> [ 0.090985] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
> [ 0.091111] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
> [ 0.091135] audit: initializing netlink subsys (disabled)
> [ 0.091152] audit: type=2000 audit(1705666525.028:1): state=initialized audit_enabled=0 res=1
> [ 0.091152] thermal_sys: Registered thermal governor 'fair_share'
> [ 0.091152] thermal_sys: Registered thermal governor 'bang_bang'
> [ 0.091152] thermal_sys: Registered thermal governor 'step_wise'
> [ 0.091152] thermal_sys: Registered thermal governor 'user_space'
> [ 0.091152] thermal_sys: Registered thermal governor 'power_allocator'
> [ 0.091152] cpuidle: using governor ladder
> [ 0.091152] cpuidle: using governor menu
> [ 0.091152] Simple Boot Flag at 0x47 set to 0x80
> [ 0.091152] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [ 0.091152] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.091152] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.091152] PCI: not using MMCONFIG
> [ 0.091152] PCI: Using configuration type 1 for base access
> [ 0.091152] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [ 0.091152] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
> [ 0.091152] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
> [ 0.091152] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
> [ 0.091152] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
> [ 0.091152] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
> [ 0.091152] ACPI: Added _OSI(Module Device)
> [ 0.091152] ACPI: Added _OSI(Processor Device)
> [ 0.091152] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.092245] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.124380] ACPI: 11 ACPI AML tables successfully acquired and loaded
> [ 5.046680] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
> [ 5.051806] ACPI: Dynamic OEM Table Load:
> [ 5.051812] ACPI: SSDT 0xFFFF9D59810D8800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
> [ 5.052757] ACPI: Dynamic OEM Table Load:
> [ 5.052762] ACPI: SSDT 0xFFFF9D598113A000 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
> [ 5.054323] ACPI: Dynamic OEM Table Load:
> [ 5.054327] ACPI: SSDT 0xFFFF9D5981139000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
> [ 5.055491] ACPI: Dynamic OEM Table Load:
> [ 5.055495] ACPI: SSDT 0xFFFF9D598114E600 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
> [ 5.057881] ACPI: _OSC evaluated successfully for all CPUs
> [ 5.058011] ACPI: EC: EC started
> [ 5.058012] ACPI: EC: interrupt blocked
> [ 5.062577] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
> [ 5.062579] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
> [ 5.062581] ACPI: Interpreter enabled
> [ 5.062616] ACPI: PM: (supports S0 S3 S4 S5)
> [ 5.062617] ACPI: Using IOAPIC for interrupt routing
> [ 5.062653] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 5.063340] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
> [ 5.063349] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 5.063350] PCI: Using E820 reservations for host bridge windows
> [ 5.063833] ACPI: Enabled 8 GPEs in block 00 to 7F
> [ 5.075046] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
> [ 5.075301] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
> [ 5.075556] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
> [ 5.075806] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
> [ 5.076313] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
> [ 5.076564] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
> [ 5.077166] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
> [ 5.077416] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
> [ 5.077669] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
> [ 5.077919] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
> [ 5.078167] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
> [ 5.078421] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
> [ 5.078674] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
> [ 5.078938] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
> [ 5.079186] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
> [ 5.079439] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
> [ 5.079689] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
> [ 5.080733] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
> [ 5.080984] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
> [ 5.081234] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
> [ 5.099161] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
> [ 5.099167] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
> [ 5.099317] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
> [ 5.099585] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
> [ 5.099587] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
> [ 5.100379] PCI host bridge to bus 0000:00
> [ 5.100381] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
> [ 5.100383] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> [ 5.100386] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
> [ 5.100387] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window]
> [ 5.100388] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
> [ 5.100392] pci_bus 0000:00: root bus resource [bus 00-fe]
> [ 5.100410] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
> [ 5.100482] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
> [ 5.100489] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
> [ 5.100494] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
> [ 5.100498] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
> [ 5.100510] pci 0000:00:02.0: BAR 2: assigned to efifb
> [ 5.100512] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [ 5.100651] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
> [ 5.100659] pci 0000:00:04.0: reg 0x10: [mem 0xdc320000-0xdc327fff 64bit]
> [ 5.100898] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
> [ 5.100912] pci 0000:00:14.0: reg 0x10: [mem 0xdc310000-0xdc31ffff 64bit]
> [ 5.100971] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [ 5.101413] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
> [ 5.101427] pci 0000:00:14.2: reg 0x10: [mem 0xdc334000-0xdc334fff 64bit]
> [ 5.101567] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
> [ 5.101599] pci 0000:00:15.0: reg 0x10: [mem 0xdc333000-0xdc333fff 64bit]
> [ 5.101911] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
> [ 5.101941] pci 0000:00:15.1: reg 0x10: [mem 0xdc332000-0xdc332fff 64bit]
> [ 5.102245] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
> [ 5.102258] pci 0000:00:16.0: reg 0x10: [mem 0xdc331000-0xdc331fff 64bit]
> [ 5.102302] pci 0000:00:16.0: PME# supported from D3hot
> [ 5.102588] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
> [ 5.102647] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 5.102661] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
> [ 5.103022] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
> [ 5.103093] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 5.103111] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
> [ 5.103478] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
> [ 5.103540] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 5.103556] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
> [ 5.103933] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
> [ 5.104210] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
> [ 5.104221] pci 0000:00:1f.2: reg 0x10: [mem 0xdc32c000-0xdc32ffff]
> [ 5.104430] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
> [ 5.104448] pci 0000:00:1f.3: reg 0x10: [mem 0xdc328000-0xdc32bfff 64bit]
> [ 5.104472] pci 0000:00:1f.3: reg 0x20: [mem 0xdc300000-0xdc30ffff 64bit]
> [ 5.104513] pci 0000:00:1f.3: PME# supported from D3hot D3cold
> [ 5.105037] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
> [ 5.105095] pci 0000:00:1f.4: reg 0x10: [mem 0xdc330000-0xdc3300ff 64bit]
> [ 5.105166] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
> [ 5.105485] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400
> [ 5.105532] pci 0000:01:00.0: enabling Extended Tags
> [ 5.105609] pci 0000:01:00.0: supports D1 D2
> [ 5.105610] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 5.105684] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
> [ 5.105939] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
> [ 5.105944] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
> [ 5.105948] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
> [ 5.106024] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400
> [ 5.106073] pci 0000:02:00.0: enabling Extended Tags
> [ 5.106154] pci 0000:02:00.0: supports D1 D2
> [ 5.106155] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 5.106320] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400
> [ 5.106368] pci 0000:02:01.0: enabling Extended Tags
> [ 5.106454] pci 0000:02:01.0: supports D1 D2
> [ 5.106455] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 5.106615] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400
> [ 5.106664] pci 0000:02:02.0: enabling Extended Tags
> [ 5.106747] pci 0000:02:02.0: supports D1 D2
> [ 5.106748] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 5.106919] pci 0000:01:00.0: PCI bridge to [bus 02-39]
> [ 5.106926] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
> [ 5.106932] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
> [ 5.106968] pci 0000:02:00.0: PCI bridge to [bus 03]
> [ 5.106976] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
> [ 5.107017] pci 0000:02:01.0: PCI bridge to [bus 04-38]
> [ 5.107025] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
> [ 5.107030] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
> [ 5.107102] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330
> [ 5.107123] pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff]
> [ 5.107196] pci 0000:39:00.0: enabling Extended Tags
> [ 5.107299] pci 0000:39:00.0: supports D1 D2
> [ 5.107300] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 5.107398] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
> [ 5.107533] pci 0000:02:02.0: PCI bridge to [bus 39]
> [ 5.107541] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
> [ 5.107895] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000
> [ 5.108112] pci 0000:3a:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
> [ 5.109225] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
> [ 5.110818] pci 0000:00:1c.4: PCI bridge to [bus 3a]
> [ 5.110822] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
> [ 5.110908] pci 0000:3b:00.0: [1c5c:1284] type 00 class 0x010802
> [ 5.110929] pci 0000:3b:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
> [ 5.111034] pci 0000:3b:00.0: PME# supported from D0 D1 D3hot
> [ 5.111343] pci 0000:00:1d.0: PCI bridge to [bus 3b]
> [ 5.111346] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
> [ 5.114023] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
> [ 5.114023] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
> [ 5.114023] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
> [ 5.114023] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
> [ 5.114023] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
> [ 5.114023] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
> [ 5.114023] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
> [ 5.114023] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
> [ 5.124100] ACPI: EC: interrupt unblocked
> [ 5.124101] ACPI: EC: event unblocked
> [ 5.124107] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
> [ 5.124108] ACPI: EC: GPE=0x14
> [ 5.124109] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
> [ 5.124111] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
> [ 5.124242] iommu: Default domain type: Translated
> [ 5.124242] iommu: DMA domain TLB invalidation policy: lazy mode
> [ 5.124242] pps_core: LinuxPPS API ver. 1 registered
> [ 5.124242] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [ 5.124242] PTP clock support registered
> [ 5.124242] EDAC MC: Ver: 3.0.0
> [ 5.124554] efivars: Registered efivars operations
> [ 5.124589] NetLabel: Initializing
> [ 5.124589] NetLabel: domain hash size = 128
> [ 5.124589] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
> [ 5.124589] NetLabel: unlabeled traffic allowed by default
> [ 5.124589] PCI: Using ACPI for IRQ routing
> [ 5.146975] PCI: pci_cache_line_size set to 64 bytes
> [ 5.147365] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
> [ 5.147366] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
> [ 5.147367] e820: reserve RAM buffer [mem 0x4ea13018-0x4fffffff]
> [ 5.147368] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff]
> [ 5.147370] e820: reserve RAM buffer [mem 0x62264000-0x63ffffff]
> [ 5.147371] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff]
> [ 5.147372] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff]
> [ 5.147373] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff]
> [ 5.148246] pci 0000:00:02.0: vgaarb: setting as boot VGA device
> [ 5.148247] pci 0000:00:02.0: vgaarb: bridge control possible
> [ 5.148248] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> [ 5.148252] vgaarb: loaded
> [ 5.148322] clocksource: Switched to clocksource tsc-early
> [ 5.148991] VFS: Disk quotas dquot_6.6.0
> [ 5.149004] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 5.149115] AppArmor: AppArmor Filesystem Enabled
> [ 5.149127] pnp: PnP ACPI init
> [ 5.149332] system 00:00: [io 0x0680-0x069f] has been reserved
> [ 5.149335] system 00:00: [io 0xffff] has been reserved
> [ 5.149337] system 00:00: [io 0xffff] has been reserved
> [ 5.149338] system 00:00: [io 0xffff] has been reserved
> [ 5.149340] system 00:00: [io 0x1800-0x18fe] has been reserved
> [ 5.149341] system 00:00: [io 0x164e-0x164f] has been reserved
> [ 5.149463] system 00:02: [io 0x1854-0x1857] has been reserved
> [ 5.149793] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
> [ 5.149796] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 5.149798] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 5.149799] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
> [ 5.149801] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 5.149802] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
> [ 5.149804] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
> [ 5.149806] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
> [ 5.149807] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
> [ 5.149809] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
> [ 5.149853] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
> [ 5.149856] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
> [ 5.149857] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
> [ 5.149859] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
> [ 5.149860] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
> [ 5.149862] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
> [ 5.149863] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
> [ 5.150107] system 00:07: [io 0xff00-0xfffe] has been reserved
> [ 5.150988] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
> [ 5.150990] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
> [ 5.154084] pnp: PnP ACPI: found 9 devices
> [ 5.159616] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [ 5.159670] NET: Registered PF_INET protocol family
> [ 5.159790] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
> [ 5.162055] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
> [ 5.162078] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [ 5.162133] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
> [ 5.162319] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
> [ 5.162511] TCP: Hash tables configured (established 131072 bind 65536)
> [ 5.162577] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
> [ 5.162616] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
> [ 5.162657] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
> [ 5.162710] NET: Registered PF_UNIX/PF_LOCAL protocol family
> [ 5.162715] NET: Registered PF_XDP protocol family
> [ 5.162725] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
> [ 5.162729] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
> [ 5.162731] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
> [ 5.162734] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
> [ 5.162736] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 3000
> [ 5.162743] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x4fff]
> [ 5.162746] pci 0000:01:00.0: BAR 13: assigned [io 0x2000-0x3fff]
> [ 5.162749] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 5.162751] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 5.162753] pci 0000:02:01.0: BAR 13: assigned [io 0x2000-0x2fff]
> [ 5.162754] pci 0000:02:02.0: BAR 13: assigned [io 0x3000-0x3fff]
> [ 5.162756] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 5.162757] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 5.162759] pci 0000:02:00.0: PCI bridge to [bus 03]
> [ 5.162764] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
> [ 5.162772] pci 0000:02:01.0: PCI bridge to [bus 04-38]
> [ 5.162775] pci 0000:02:01.0: bridge window [io 0x2000-0x2fff]
> [ 5.162779] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
> [ 5.162783] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
> [ 5.162788] pci 0000:02:02.0: PCI bridge to [bus 39]
> [ 5.162791] pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
> [ 5.162795] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
> [ 5.162803] pci 0000:01:00.0: PCI bridge to [bus 02-39]
> [ 5.162805] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
> [ 5.162809] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
> [ 5.162814] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
> [ 5.162820] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
> [ 5.162821] pci 0000:00:1c.0: bridge window [io 0x2000-0x4fff]
> [ 5.162824] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
> [ 5.162827] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
> [ 5.162830] pci 0000:00:1c.4: PCI bridge to [bus 3a]
> [ 5.162833] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
> [ 5.162839] pci 0000:00:1d.0: PCI bridge to [bus 3b]
> [ 5.162842] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
> [ 5.162847] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
> [ 5.162849] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
> [ 5.162850] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
> [ 5.162851] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window]
> [ 5.162853] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
> [ 5.162854] pci_bus 0000:01: resource 0 [io 0x2000-0x4fff]
> [ 5.162855] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
> [ 5.162857] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
> [ 5.162858] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
> [ 5.162859] pci_bus 0000:02: resource 1 [mem 0xc4000000-0xda0fffff]
> [ 5.162860] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
> [ 5.162862] pci_bus 0000:03: resource 1 [mem 0xda000000-0xda0fffff]
> [ 5.162863] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
> [ 5.162864] pci_bus 0000:04: resource 1 [mem 0xc4000000-0xd9efffff]
> [ 5.162865] pci_bus 0000:04: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
> [ 5.162867] pci_bus 0000:39: resource 0 [io 0x3000-0x3fff]
> [ 5.162868] pci_bus 0000:39: resource 1 [mem 0xd9f00000-0xd9ffffff]
> [ 5.162869] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
> [ 5.162871] pci_bus 0000:3b: resource 1 [mem 0xdc200000-0xdc2fffff]
> [ 5.163385] pci 0000:01:00.0: enabling device (0006 -> 0007)
> [ 5.163422] pci 0000:02:02.0: enabling device (0006 -> 0007)
> [ 5.163688] PCI: CLS 128 bytes, default 64
> [ 5.163699] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
> [ 5.163703] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
> [ 5.163713] DMAR: No ATSR found
> [ 5.163714] DMAR: No SATC found
> [ 5.163715] DMAR: IOMMU feature fl1gp_support inconsistent
> [ 5.163716] DMAR: IOMMU feature pgsel_inv inconsistent
> [ 5.163717] DMAR: IOMMU feature nwfs inconsistent
> [ 5.163718] DMAR: IOMMU feature pasid inconsistent
> [ 5.163719] DMAR: IOMMU feature eafs inconsistent
> [ 5.163720] DMAR: IOMMU feature prs inconsistent
> [ 5.163720] DMAR: IOMMU feature nest inconsistent
> [ 5.163721] DMAR: IOMMU feature mts inconsistent
> [ 5.163722] DMAR: IOMMU feature sc_support inconsistent
> [ 5.163722] DMAR: IOMMU feature dev_iotlb_support inconsistent
> [ 5.163724] DMAR: dmar0: Using Queued invalidation
> [ 5.163727] DMAR: dmar1: Using Queued invalidation
> [ 5.163757] Trying to unpack rootfs image as initramfs...
> [ 5.164027] pci 0000:00:02.0: Adding to iommu group 0
> [ 5.164070] pci 0000:00:00.0: Adding to iommu group 1
> [ 5.164080] pci 0000:00:04.0: Adding to iommu group 2
> [ 5.164098] pci 0000:00:14.0: Adding to iommu group 3
> [ 5.164107] pci 0000:00:14.2: Adding to iommu group 3
> [ 5.164124] pci 0000:00:15.0: Adding to iommu group 4
> [ 5.164133] pci 0000:00:15.1: Adding to iommu group 4
> [ 5.164146] pci 0000:00:16.0: Adding to iommu group 5
> [ 5.164164] pci 0000:00:1c.0: Adding to iommu group 6
> [ 5.164176] pci 0000:00:1c.4: Adding to iommu group 7
> [ 5.164187] pci 0000:00:1d.0: Adding to iommu group 8
> [ 5.164210] pci 0000:00:1f.0: Adding to iommu group 9
> [ 5.164221] pci 0000:00:1f.2: Adding to iommu group 9
> [ 5.164231] pci 0000:00:1f.3: Adding to iommu group 9
> [ 5.164241] pci 0000:00:1f.4: Adding to iommu group 9
> [ 5.164253] pci 0000:01:00.0: Adding to iommu group 10
> [ 5.164264] pci 0000:02:00.0: Adding to iommu group 11
> [ 5.164275] pci 0000:02:01.0: Adding to iommu group 12
> [ 5.164286] pci 0000:02:02.0: Adding to iommu group 13
> [ 5.164292] pci 0000:39:00.0: Adding to iommu group 13
> [ 5.164305] pci 0000:3a:00.0: Adding to iommu group 14
> [ 5.164316] pci 0000:3b:00.0: Adding to iommu group 15
> [ 5.165458] DMAR: Intel(R) Virtualization Technology for Directed I/O
> [ 5.165461] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 5.165462] software IO TLB: mapped [mem 0x000000005e264000-0x0000000062264000] (64MB)
> [ 5.165531] sgx: EPC section 0x70200000-0x75f7ffff
> [ 5.166406] Initialise system trusted keyrings
> [ 5.166417] Key type blacklist registered
> [ 5.166474] workingset: timestamp_bits=36 max_order=22 bucket_order=0
> [ 5.166484] zbud: loaded
> [ 5.166578] fuse: init (API version 7.39)
> [ 5.166710] integrity: Platform Keyring initialized
> [ 5.166714] integrity: Machine keyring initialized
> [ 5.166715] Key type asymmetric registered
> [ 5.166717] Asymmetric key parser 'x509' registered
> [ 5.297299] Freeing initrd memory: 60468K
> [ 5.301405] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
> [ 5.301434] io scheduler mq-deadline registered
> [ 5.302705] pcieport 0000:02:01.0: enabling device (0006 -> 0007)
> [ 5.302996] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 5.303011] efifb: probing for efifb
> [ 5.303027] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
> [ 5.303029] efifb: mode is 3200x1800x32, linelength=12800, pages=1
> [ 5.303030] efifb: scrolling: redraw
> [ 5.303031] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 5.303109] Console: switching to colour frame buffer device 200x56
> [ 5.306578] fb0: EFI VGA frame buffer device
> [ 5.308533] thermal LNXTHERM:00: registered as thermal_zone0
> [ 5.308535] ACPI: thermal: Thermal Zone [THM] (25 C)
> [ 5.308673] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 5.309154] hpet_acpi_add: no address or irqs in _CRS
> [ 5.309173] Linux agpgart interface v0.103
> [ 5.321045] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
> [ 5.360121] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> [ 5.360396] i8042: Warning: Keylock active
> [ 5.362622] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 5.362628] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 5.362825] mousedev: PS/2 mouse device common for all mice
> [ 5.362866] rtc_cmos 00:01: RTC can wake from S4
> [ 5.363677] rtc_cmos 00:01: registered as rtc0
> [ 5.363836] rtc_cmos 00:01: setting system clock to 2024-01-19T12:15:31 UTC (1705666531)
> [ 5.363863] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
> [ 5.364110] intel_pstate: Intel P-state driver initializing
> [ 5.364367] intel_pstate: HWP enabled
> [ 5.364412] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
> [ 5.365951] ledtrig-cpu: registered to indicate activity on CPUs
> [ 5.382432] NET: Registered PF_INET6 protocol family
> [ 5.387972] Segment Routing with IPv6
> [ 5.387987] In-situ OAM (IOAM) with IPv6
> [ 5.388018] mip6: Mobile IPv6
> [ 5.388022] NET: Registered PF_PACKET protocol family
> [ 5.388084] mpls_gso: MPLS GSO support
> [ 5.388406] microcode: Current revision: 0x000000f4
> [ 5.388409] microcode: Updated early from: 0x000000f0
> [ 5.388491] IPI shorthand broadcast: enabled
> [ 5.389943] sched_clock: Marking stable (5384002282, 5820600)->(5493284337, -103461455)
> [ 5.390118] registered taskstats version 1
> [ 5.390215] Loading compiled-in X.509 certificates
> [ 5.410241] Loaded X.509 cert 'Build time autogenerated kernel key: 45375d97a88689d31f3746ef65fc2b509cef42c6'
> [ 5.412443] Key type .fscrypt registered
> [ 5.412446] Key type fscrypt-provisioning registered
> [ 5.421005] cryptd: max_cpu_qlen set to 1000
> [ 5.429220] AVX2 version of gcm_enc/dec engaged.
> [ 5.429254] AES CTR mode by8 optimization enabled
> [ 5.453274] Key type encrypted registered
> [ 5.453278] AppArmor: AppArmor sha1 policy hashing enabled
> [ 5.453506] integrity: Loading X.509 certificate: UEFI:db
> [ 5.453526] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
> [ 5.453527] integrity: Loading X.509 certificate: UEFI:db
> [ 5.453544] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
> [ 5.453545] integrity: Loading X.509 certificate: UEFI:db
> [ 5.453558] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
> [ 5.453874] ima: Allocated hash algorithm: sha256
> [ 5.491991] ima: No architecture policies found
> [ 5.492014] evm: Initialising EVM extended attributes:
> [ 5.492015] evm: security.selinux
> [ 5.492017] evm: security.SMACK64 (disabled)
> [ 5.492018] evm: security.SMACK64EXEC (disabled)
> [ 5.492018] evm: security.SMACK64TRANSMUTE (disabled)
> [ 5.492019] evm: security.SMACK64MMAP (disabled)
> [ 5.492020] evm: security.apparmor
> [ 5.492021] evm: security.ima
> [ 5.492021] evm: security.capability
> [ 5.492022] evm: HMAC attrs: 0x1
> [ 5.613514] RAS: Correctable Errors collector initialized.
> [ 5.613587] clk: Disabling unused clocks
> [ 5.614475] Freeing unused decrypted memory: 2028K
> [ 5.614877] Freeing unused kernel image (initmem) memory: 3992K
> [ 5.630127] Write protecting the kernel read-only data: 28672k
> [ 5.630694] Freeing unused kernel image (rodata/data gap) memory: 1636K
> [ 5.674643] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [ 5.674645] x86/mm: Checking user space page tables
> [ 5.716804] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [ 5.716808] Run /init as init process
> [ 5.716810] with arguments:
> [ 5.716811] /init
> [ 5.716811] with environment:
> [ 5.716812] HOME=/
> [ 5.716813] TERM=linux
> [ 5.716813] BOOT_IMAGE=/vmlinuz-6.7-amd64
> [ 5.901869] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
> [ 5.914076] hid: raw HID events driver (C) Jiri Kosina
> [ 5.948726] ACPI: battery: Slot [BAT0] (battery present)
> [ 5.950745] ACPI: bus type USB registered
> [ 5.950776] usbcore: registered new interface driver usbfs
> [ 5.950786] usbcore: registered new interface driver hub
> [ 5.950798] usbcore: registered new device driver usb
> [ 5.952989] i801_smbus 0000:00:1f.4: SPD Write Disable is set
> [ 5.953042] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
> [ 5.953111] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000
> [ 5.953171] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]
> [ 5.953406] pci 0000:00:1f.1: Adding to iommu group 16
> [ 5.956727] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
> [ 5.957041] platform idma64.0: Adding to iommu group 16
> [ 5.957169] idma64 idma64.0: Found Intel integrated DMA 64-bit
> [ 5.957445] platform i2c_designware.0: Adding to iommu group 17
> [ 5.974186] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
> [ 5.974381] i2c i2c-0: 2/2 memory slots populated (from DMI)
> [ 5.974404] platform idma64.1: Adding to iommu group 18
> [ 5.974553] idma64 idma64.1: Found Intel integrated DMA 64-bit
> [ 5.974591] platform i2c_designware.1: Adding to iommu group 19
> [ 5.982071] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 5.982079] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
> [ 5.983222] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
> [ 5.984172] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 5.984177] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
> [ 5.984181] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
> [ 5.984219] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
> [ 5.984221] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.984224] usb usb1: Product: xHCI Host Controller
> [ 5.984225] usb usb1: Manufacturer: Linux 6.7-amd64 xhci-hcd
> [ 5.984227] usb usb1: SerialNumber: 0000:00:14.0
> [ 5.984746] hub 1-0:1.0: USB hub found
> [ 5.984762] hub 1-0:1.0: 12 ports detected
> [ 5.988780] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
> [ 5.988784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.988786] usb usb2: Product: xHCI Host Controller
> [ 5.988788] usb usb2: Manufacturer: Linux 6.7-amd64 xhci-hcd
> [ 5.988789] usb usb2: SerialNumber: 0000:00:14.0
> [ 5.988958] hub 2-0:1.0: USB hub found
> [ 5.988970] hub 2-0:1.0: 6 ports detected
> [ 5.990259] usb: port power management may be unreliable
> [ 5.990711] xhci_hcd 0000:39:00.0: xHCI Host Controller
> [ 5.990716] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
> [ 5.991897] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
> [ 5.992149] xhci_hcd 0000:39:00.0: xHCI Host Controller
> [ 5.992152] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
> [ 5.992155] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
> [ 5.992189] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
> [ 5.992192] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.992194] usb usb3: Product: xHCI Host Controller
> [ 5.992196] usb usb3: Manufacturer: Linux 6.7-amd64 xhci-hcd
> [ 5.992197] usb usb3: SerialNumber: 0000:39:00.0
> [ 5.992308] hub 3-0:1.0: USB hub found
> [ 5.992317] hub 3-0:1.0: 2 ports detected
> [ 5.992742] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
> [ 5.992745] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.992747] usb usb4: Product: xHCI Host Controller
> [ 5.992749] usb usb4: Manufacturer: Linux 6.7-amd64 xhci-hcd
> [ 5.992751] usb usb4: SerialNumber: 0000:39:00.0
> [ 5.992850] hub 4-0:1.0: USB hub found
> [ 5.992859] hub 4-0:1.0: 2 ports detected
> [ 6.001298] ACPI: bus type drm_connector registered
> [ 6.163044] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input2
> [ 6.163113] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input3
> [ 6.163170] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
> [ 6.170673] tsc: Refined TSC clocksource calibration: 2904.000 MHz
> [ 6.170681] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
> [ 6.170917] clocksource: Switched to clocksource tsc
> [ 6.180089] nvme nvme0: pci function 0000:3b:00.0
> [ 6.199297] nvme nvme0: 4/0/0 default/read/poll queues
> [ 6.204698] nvme0n1: p1 p2 p3 p4
> [ 6.245910] usb 1-1: new low-speed USB device number 2 using xhci_hcd
> [ 6.245926] usb 3-1: new high-speed USB device number 2 using xhci_hcd
> [ 6.251851] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
> [ 6.251889] device-mapper: uevent: version 1.0.3
> [ 6.252078] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
> [ 6.398220] usb 3-1: New USB device found, idVendor=2109, idProduct=2820, bcdDevice=30.03
> [ 6.398243] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 6.398255] usb 3-1: Product: USB2.0 Hub
> [ 6.398263] usb 3-1: Manufacturer: VIA Labs, Inc.
> [ 6.401774] hub 3-1:1.0: USB hub found
> [ 6.402046] hub 3-1:1.0: 5 ports detected
> [ 6.402678] usb 1-1: New USB device found, idVendor=0bf8, idProduct=101e, bcdDevice= 1.09
> [ 6.402700] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 6.402709] usb 1-1: Product: Fujitsu Keyboard
> [ 6.402717] usb 1-1: Manufacturer: Fujitsu
> [ 6.433062] input: Fujitsu Fujitsu Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0BF8:101E.0002/input/input5
> [ 6.490653] hid-generic 0003:0BF8:101E.0002: input,hidraw1: USB HID v1.10 Keyboard [Fujitsu Fujitsu Keyboard] on usb-0000:00:14.0-1/input0
> [ 6.499143] input: Fujitsu Fujitsu Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0BF8:101E.0003/input/input6
> [ 6.529401] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
> [ 6.533897] usb 1-2: new low-speed USB device number 3 using xhci_hcd
> [ 6.549884] usb 4-1: New USB device found, idVendor=2109, idProduct=0820, bcdDevice=30.03
> [ 6.549903] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 6.549912] usb 4-1: Product: USB3.1 Hub
> [ 6.549919] usb 4-1: Manufacturer: VIA Labs, Inc.
> [ 6.552847] hub 4-1:1.0: USB hub found
> [ 6.553500] hub 4-1:1.0: 4 ports detected
> [ 6.558137] input: Fujitsu Fujitsu Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0BF8:101E.0003/input/input7
> [ 6.558515] hid-generic 0003:0BF8:101E.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Fujitsu Fujitsu Keyboard] on usb-0000:00:14.0-1/input1
> [ 6.558667] usbcore: registered new interface driver usbhid
> [ 6.558677] usbhid: USB HID core driver
> [ 6.686874] usb 1-2: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
> [ 6.686899] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 6.686910] usb 1-2: Product: USB Optical Mouse
> [ 6.686919] usb 1-2: Manufacturer: Logitech
> [ 6.691887] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C077.0004/input/input8
> [ 6.692216] hid-generic 0003:046D:C077.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2/input0
> [ 6.818146] usb 1-3: new full-speed USB device number 4 using xhci_hcd
> [ 6.968213] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
> [ 6.968239] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 7.098079] usb 1-4: new full-speed USB device number 5 using xhci_hcd
> [ 7.138117] usb 3-1.1: new full-speed USB device number 3 using xhci_hcd
> [ 7.249134] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
> [ 7.249163] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
> [ 7.249175] usb 1-4: Product: Touchscreen
> [ 7.249183] usb 1-4: Manufacturer: ELAN
> [ 7.262726] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input9
> [ 7.262787] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input10
> [ 7.262809] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input11
> [ 7.262870] hid-generic 0003:04F3:2234.0005: input,hiddev1,hidraw4: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
> [ 7.294650] usb 3-1.1: New USB device found, idVendor=06c4, idProduct=c412, bcdDevice= 0.06
> [ 7.294672] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 7.294682] usb 3-1.1: Product: DELL DA300
> [ 7.294689] usb 3-1.1: Manufacturer: Bizlink
> [ 7.294696] usb 3-1.1: SerialNumber: MCU Ver0006
> [ 7.308232] hid-generic 0003:06C4:C412.0006: hiddev2,hidraw5: USB HID v1.11 Device [Bizlink DELL DA300] on usb-0000:39:00.0-1.1/input0
> [ 7.389974] usb 1-5: new high-speed USB device number 6 using xhci_hcd
> [ 7.599265] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
> [ 7.599290] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
> [ 7.599302] usb 1-5: Product: Integrated_Webcam_HD
> [ 7.599310] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
> [ 8.414385] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd
> [ 8.434955] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
> [ 8.434978] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
> [ 8.434987] usb 4-1.2: Product: USB 10/100/1000 LAN
> [ 8.434994] usb 4-1.2: Manufacturer: Realtek
> [ 8.435000] usb 4-1.2: SerialNumber: 001000001
> [ 8.449635] usbcore: registered new device driver r8152-cfgselector
> [ 8.535005] r8152-cfgselector 4-1.2: reset SuperSpeed USB device number 3 using xhci_hcd
> [ 8.560039] r8152 4-1.2:1.0: firmware: direct-loading firmware rtl_nic/rtl8153b-2.fw
> [ 8.560098] r8152 4-1.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr 18:db:f2:2d:cc:f3
> [ 8.562628] r8152 4-1.2:1.0: load rtl8153b-2 v2 04/27/23 successfully
> [ 8.610249] r8152 4-1.2:1.0 eth0: v1.12.13
> [ 8.610371] usbcore: registered new interface driver r8152
> [ 8.628791] usbcore: registered new interface driver cdc_ether
> [ 8.633613] usbcore: registered new interface driver r8153_ecm
> [ 8.661130] r8152 4-1.2:1.0 enx18dbf22dccf3: renamed from eth0
> [ 12.612396] PM: Image not found (code -22)
> [ 12.785277] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none.
> [ 12.828218] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
> [ 12.902768] systemd[1]: Inserted module 'autofs4'
> [ 12.941965] systemd[1]: systemd 255.2-4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
> [ 12.941981] systemd[1]: Detected architecture x86-64.
> [ 12.943181] systemd[1]: Hostname set to <abreu>.
> [ 13.119736] systemd[1]: Queued start job for default target graphical.target.
> [ 13.142916] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
> [ 13.143242] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
> [ 13.143511] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.
> [ 13.143777] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
> [ 13.143988] systemd[1]: Created slice user.slice - User and Session Slice.
> [ 13.144055] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
> [ 13.144102] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
> [ 13.144274] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
> [ 13.144300] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
> [ 13.144306] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8...
> [ 13.144313] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5...
> [ 13.144319] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653...
> [ 13.144338] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
> [ 13.144354] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
> [ 13.144365] systemd[1]: Reached target remote-fs.target - Remote File Systems.
> [ 13.144377] systemd[1]: Reached target slices.target - Slice Units.
> [ 13.144397] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
> [ 13.145558] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
> [ 13.145653] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
> [ 13.145711] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
> [ 13.145840] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
> [ 13.145964] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
> [ 13.145994] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [ 13.146229] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
> [ 13.146323] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
> [ 13.147326] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
> [ 13.148018] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
> [ 13.149122] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
> [ 13.153406] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
> [ 13.156564] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
> [ 13.158933] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
> [ 13.160325] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
> [ 13.163938] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
> [ 13.165704] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
> [ 13.168962] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
> [ 13.178170] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
> [ 13.179544] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
> [ 13.179629] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
> [ 13.182448] pstore: Using crash dump compression: deflate
> [ 13.186067] systemd[1]: Starting systemd-journald.service - Journal Service...
> [ 13.189317] pstore: Registered efi_pstore as persistent store backend
> [ 13.189850] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
> [ 13.189876] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [ 13.191196] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
> [ 13.191275] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [ 13.195693] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
> [ 13.199452] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
> [ 13.199703] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
> [ 13.199830] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
> [ 13.199976] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
> [ 13.200303] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
> [ 13.200660] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
> [ 13.201027] systemd[1]: modprobe@configfs.service: Deactivated successfully.
> [ 13.201219] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
> [ 13.201666] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
> [ 13.201853] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
> [ 13.202202] systemd[1]: modprobe@drm.service: Deactivated successfully.
> [ 13.202383] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
> [ 13.202776] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
> [ 13.202957] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
> [ 13.203365] systemd[1]: modprobe@fuse.service: Deactivated successfully.
> [ 13.203624] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
> [ 13.206018] loop: module loaded
> [ 13.206779] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
> [ 13.208173] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
> [ 13.214062] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
> [ 13.214549] systemd[1]: modprobe@loop.service: Deactivated successfully.
> [ 13.214756] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
> [ 13.215009] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
> [ 13.216823] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
> [ 13.218308] systemd-journald[434]: Collecting audit messages is disabled.
> [ 13.220025] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
> [ 13.226883] lp: driver loaded but no devices found
> [ 13.232891] ppdev: user-space parallel port driver
> [ 13.239864] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none.
> [ 13.241534] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
> [ 13.242290] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
> [ 13.242340] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
> [ 13.244133] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
> [ 13.244178] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
> [ 13.251343] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
> [ 13.251555] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
> [ 13.253335] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
> [ 13.260300] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
> [ 13.266075] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
> [ 13.273302] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
> [ 13.278405] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
> [ 13.278570] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
> [ 13.280902] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
> [ 13.283640] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
> [ 13.297820] systemd[1]: Started systemd-journald.service - Journal Service.
> [ 13.314612] systemd-journald[434]: Received client request to flush runtime journal.
> [ 13.326624] systemd-journald[434]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/system.journal: Journal file uses a different sequence number ID, rotating.
> [ 13.326629] systemd-journald[434]: Rotating system journal.
> [ 13.548666] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13
> [ 13.550008] ACPI: button: Lid Switch [LID0]
> [ 13.550070] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input14
> [ 13.551073] ACPI: AC: AC Adapter [AC] (on-line)
> [ 13.558628] Consider using thermal netlink events interface
> [ 13.564862] intel_pmc_core INT33A1:00: initialized
> [ 13.567272] input: Intel HID events as /devices/platform/INT33D5:00/input/input15
> [ 13.604550] ACPI: button: Power Button [PBTN]
> [ 13.604624] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input16
> [ 13.606064] intel-hid INT33D5:00: platform supports 5 button array
> [ 13.610287] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input17
> [ 13.610349] ACPI: button: Sleep Button [SBTN]
> [ 13.610408] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input18
> [ 13.610510] ACPI: button: Power Button [PWRF]
> [ 13.614188] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input19
> [ 13.615619] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input22
> [ 13.623704] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
> [ 13.633273] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input20
> [ 13.640111] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
> [ 13.651111] intel_rapl_common: Found RAPL domain package
> [ 13.651116] intel_rapl_common: Found RAPL domain dram
> [ 13.688905] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS
> [ 13.721809] mc: Linux media interface: v0.10
> [ 13.761179] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
> [ 13.789915] input: PC Speaker as /devices/platform/pcspkr/input/input24
> [ 13.793064] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input25
> [ 13.793390] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input26
> [ 13.793566] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0005/input/input27
> [ 13.794019] videodev: Linux video capture interface: v2.00
> [ 13.812667] hid-multitouch 0003:04F3:2234.0005: input,hiddev1,hidraw4: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
> [ 13.831665] iTCO_vendor_support: vendor-support=0
> [ 13.881659] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
> [ 13.904360] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
> [ 13.904801] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
> [ 13.904861] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 13.906575] cfg80211: Loading compiled-in X.509 certificates for regulatory database
> [ 13.906802] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
> [ 13.907002] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
> [ 13.907205] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> [ 13.907405] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
> [ 13.913933] platform regulatory.0: firmware: direct-loading firmware regulatory.db
> [ 13.915818] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
> [ 13.974066] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
> [ 13.974072] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
> [ 13.974074] RAPL PMU: hw unit of domain package 2^-14 Joules
> [ 13.974075] RAPL PMU: hw unit of domain dram 2^-14 Joules
> [ 13.974076] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
> [ 13.974078] RAPL PMU: hw unit of domain psys 2^-14 Joules
> [ 13.975691] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input29
> [ 14.030620] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
> [ 14.031145] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none.
> [ 14.187691] usbcore: registered new interface driver uvcvideo
> [ 14.302443] intel_rapl_common: Found RAPL domain package
> [ 14.302447] intel_rapl_common: Found RAPL domain core
> [ 14.302448] intel_rapl_common: Found RAPL domain uncore
> [ 14.302450] intel_rapl_common: Found RAPL domain dram
> [ 14.302451] intel_rapl_common: Found RAPL domain psys
> [ 14.720626] i915 0000:00:02.0: [drm] VT-d active for gfx access
> [ 14.721580] Console: switching to colour dummy device 80x25
> [ 14.721611] i915 0000:00:02.0: vgaarb: deactivate vga console
> [ 14.721657] i915 0000:00:02.0: [drm] Using Transparent Hugepages
> [ 14.730436] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 14.731079] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
> [ 14.731594] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
> [ 14.768719] Bluetooth: Core ver 2.22
> [ 14.768744] NET: Registered PF_BLUETOOTH protocol family
> [ 14.768746] Bluetooth: HCI device and connection manager initialized
> [ 14.768750] Bluetooth: HCI socket layer initialized
> [ 14.768752] Bluetooth: L2CAP socket layer initialized
> [ 14.768756] Bluetooth: SCO socket layer initialized
> [ 14.777782] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
> [ 14.809040] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
> [ 14.809494] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
> [ 14.809512] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
> [ 14.814684] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
> [ 14.872426] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
> [ 14.876788] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0
> [ 14.888574] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [ 14.890105] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input30
> [ 14.890238] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
> [ 14.890807] i915 display info: display version: 9
> [ 14.890810] i915 display info: cursor_needs_physical: no
> [ 14.890811] i915 display info: has_cdclk_crawl: no
> [ 14.890812] i915 display info: has_cdclk_squash: no
> [ 14.890813] i915 display info: has_ddi: yes
> [ 14.890814] i915 display info: has_dp_mst: yes
> [ 14.890816] i915 display info: has_dsb: no
> [ 14.890817] i915 display info: has_fpga_dbg: yes
> [ 14.890818] i915 display info: has_gmch: no
> [ 14.890819] i915 display info: has_hotplug: yes
> [ 14.890820] i915 display info: has_hti: no
> [ 14.890821] i915 display info: has_ipc: yes
> [ 14.890822] i915 display info: has_overlay: no
> [ 14.890823] i915 display info: has_psr: yes
> [ 14.890824] i915 display info: has_psr_hw_tracking: yes
> [ 14.890825] i915 display info: overlay_needs_physical: no
> [ 14.890826] i915 display info: supports_tv: no
> [ 14.890827] i915 display info: has_hdcp: yes
> [ 14.890828] i915 display info: has_dmc: yes
> [ 14.890829] i915 display info: has_dsc: no
> [ 14.891714] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
> [ 14.899009] audit: type=1400 audit(1705666541.031:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=670 comm="apparmor_parser"
> [ 14.899380] audit: type=1400 audit(1705666541.031:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=671 comm="apparmor_parser"
> [ 14.899385] audit: type=1400 audit(1705666541.031:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=671 comm="apparmor_parser"
> [ 14.903191] audit: type=1400 audit(1705666541.035:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=675 comm="apparmor_parser"
> [ 14.903197] audit: type=1400 audit(1705666541.035:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=675 comm="apparmor_parser"
> [ 14.903199] audit: type=1400 audit(1705666541.035:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=675 comm="apparmor_parser"
> [ 14.904763] audit: type=1400 audit(1705666541.035:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=672 comm="apparmor_parser"
> [ 14.904770] audit: type=1400 audit(1705666541.035:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=672 comm="apparmor_parser"
> [ 14.904772] audit: type=1400 audit(1705666541.035:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=672 comm="apparmor_parser"
> [ 14.904774] audit: type=1400 audit(1705666541.035:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=672 comm="apparmor_parser"
> [ 14.938183] usbcore: registered new interface driver btusb
> [ 14.941259] bluetooth hci0: firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
> [ 14.941479] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
> [ 14.941481] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
> [ 14.961032] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
> [ 14.965601] fbcon: i915drmfb (fb0) is primary device
> [ 14.965867] i915 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
> [ 15.084496] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2)
> [ 15.084499] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
> [ 15.084511] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2)
> [ 15.084521] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2)
> [ 15.084528] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2)
> [ 15.087064] ath10k_pci 0000:3a:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-6.bin
> [ 15.088873] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
> [ 15.088876] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
> [ 15.089240] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00288- api 6 features wowlan,ignore-otp,mfp crc32 bf907c7c
> [ 15.114535] Console: switching to colour frame buffer device 200x56
> [ 15.153226] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
> [ 15.155662] ath10k_pci 0000:3a:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin
> [ 15.158562] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
> [ 15.254269] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
> [ 15.254274] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 15.254275] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
> [ 15.254277] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
> [ 15.254278] snd_hda_codec_realtek hdaudioC0D0: inputs:
> [ 15.254282] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
> [ 15.254284] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
> [ 15.254285] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
> [ 15.260023] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
> [ 15.300223] bluetooth hci0: firmware: direct-loading firmware qca/nvm_usb_00000302.bin
> [ 15.300246] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
> [ 15.331523] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
> [ 15.341648] ath: EEPROM regdomain: 0x6c
> [ 15.341650] ath: EEPROM indicates we should expect a direct regpair map
> [ 15.341652] ath: Country alpha2 being used: 00
> [ 15.341652] ath: Regpair used: 0x6c
> [ 15.345818] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
> [ 15.757223] NET: Registered PF_QIPCRTR protocol family
> [ 15.873382] r8152 4-1.2:1.0 enx18dbf22dccf3: carrier on
> [ 16.049992] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
> [ 16.050060] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
> [ 16.050119] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
> [ 16.050173] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34
> [ 16.050221] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input35
> [ 19.375624] rfkill: input handler disabled
> [ 21.194149] wlp58s0: authenticate with 6c:f3:7f:10:ae:1a (local address=9c:b6:d0:d1:6a:b1)
> [ 21.194154] wlp58s0: send auth to 6c:f3:7f:10:ae:1a (try 1/3)
> [ 21.200974] wlp58s0: authenticated
> [ 21.201123] wlp58s0: VHT capa missing/short, disabling VHT/HE/EHT
> [ 21.201833] wlp58s0: associate with 6c:f3:7f:10:ae:1a (try 1/3)
> [ 21.212666] wlp58s0: RX AssocResp from 6c:f3:7f:10:ae:1a (capab=0x401 status=0 aid=1)
> [ 21.215146] wlp58s0: associated
> [ 21.307789] PPP generic driver version 2.4.2
> [ 21.310713] NET: Registered PF_PPPOX protocol family
> [ 21.325698] l2tp_core: L2TP core driver, V2.0
> [ 21.328345] l2tp_netlink: L2TP netlink interface
> [ 21.331617] l2tp_ppp: PPPoL2TP kernel driver, V2.0
> [ 21.341597] Initializing XFRM netlink socket
> [ 21.352219] IPsec XFRM device driver
> [ 23.654362] systemd-journald[434]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/user-5272.journal: Journal file uses a different sequence number ID, rotating.
> [ 24.049182] rfkill: input handler enabled
> [ 28.677929] rfkill: input handler disabled
> [ 59.095264] wlp58s0: deauthenticating from 6c:f3:7f:10:ae:1a by local choice (Reason: 3=DEAUTH_LEAVING)
> [ 99.711230] PM: suspend entry (deep)
> [ 99.716031] Filesystems sync: 0.004 seconds
> [ 99.716150] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
> [ 99.716253] (NULL device *): firmware: direct-loading firmware regulatory.db
> [ 99.716268] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
> [ 99.716298] (NULL device *): firmware: direct-loading firmware qca/nvm_usb_00000302.bin
> [ 99.716311] (NULL device *): firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
> [ 99.718635] Freezing user space processes
> [ 99.720764] Freezing user space processes completed (elapsed 0.002 seconds)
> [ 99.720768] OOM killer disabled.
> [ 99.720769] Freezing remaining freezable tasks
> [ 99.722054] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
> [ 99.722101] printk: Suspending console(s) (use no_console_suspend to debug)
> [ 100.285178] ACPI: EC: interrupt blocked
> [ 100.319908] ACPI: PM: Preparing to enter system sleep state S3
> [ 100.331793] ACPI: EC: event blocked
> [ 100.331798] ACPI: EC: EC stopped
> [ 100.331800] ACPI: PM: Saving platform NVS memory
> [ 100.335224] Disabling non-boot CPUs ...
> [ 100.337412] smpboot: CPU 1 is now offline
> [ 100.341065] smpboot: CPU 2 is now offline
> [ 100.346441] smpboot: CPU 3 is now offline
> [ 100.353086] ACPI: PM: Low-level resume complete
> [ 100.353129] ACPI: EC: EC started
> [ 100.353129] ACPI: PM: Restoring platform NVS memory
> [ 100.355219] Enabling non-boot CPUs ...
> [ 100.355244] smpboot: Booting Node 0 Processor 1 APIC 0x2
> [ 100.355954] CPU1 is up
> [ 100.355972] smpboot: Booting Node 0 Processor 2 APIC 0x1
> [ 100.356698] CPU2 is up
> [ 100.356716] smpboot: Booting Node 0 Processor 3 APIC 0x3
> [ 100.357371] CPU3 is up
> [ 100.360217] ACPI: PM: Waking up from system sleep state S3
> [ 100.668380] ACPI: EC: interrupt unblocked
> [ 100.668598] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
> [ 100.668606] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
> [ 100.668643] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
> [ 100.690996] DMAR: DRHD: handling fault status reg 2
> [ 100.691001] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
> [ 100.756870] ACPI: EC: event unblocked
> [ 100.758124] xhci_hcd 0000:39:00.0: xHC error in resume, USBSTS 0x411, Reinit
> [ 100.758129] usb usb3: root hub lost power or was reset
> [ 100.758131] usb usb4: root hub lost power or was reset
> [ 100.768819] nvme nvme0: 4/0/0 default/read/poll queues
> [ 100.788891] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
> [ 100.791478] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
> [ 100.798652] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
> [ 101.058430] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
> [ 101.214521] usb 1-2: reset low-speed USB device number 3 using xhci_hcd
> [ 101.338567] usb 4-1: reset SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
> [ 101.630655] usb 1-3: reset full-speed USB device number 4 using xhci_hcd
> [ 101.906544] usb 1-4: reset full-speed USB device number 5 using xhci_hcd
> [ 101.966492] usb 3-1.1: reset full-speed USB device number 3 using xhci_hcd
> [ 102.182536] usb 1-5: reset high-speed USB device number 6 using xhci_hcd
> [ 102.598644] usb 1-1: reset low-speed USB device number 2 using xhci_hcd
> [ 102.990582] r8152-cfgselector 4-1.2: reset SuperSpeed USB device number 3 using xhci_hcd
> [ 103.013516] r8152 4-1.2:1.0: skip request firmware
> [ 103.013637] r8152 4-1.2:1.0 enx18dbf22dccf3: Using pass-thru MAC addr 18:db:f2:2d:cc:f3
> [ 103.016440] r8152 4-1.2:1.0: load rtl8153b-2 v2 04/27/23 successfully
> [ 103.056663] OOM killer enabled.
> [ 103.056665] Restarting tasks ...
> [ 103.056737] pci_bus 0000:02: Allocating resources
> [ 103.056759] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
> [ 103.056769] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 103.056773] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 103.056778] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 103.056781] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 103.058855] pci_bus 0000:02: Allocating resources
> [ 103.058875] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
> [ 103.058888] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 103.058892] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 103.058897] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 103.058900] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 103.059435] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
> [ 103.060638] done.
> [ 103.060678] random: crng reseeded on system resumption
> [ 103.150372] PM: suspend exit
> [ 103.211747] Process accounting resumed
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`
2024-01-19 12:59 Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0` Paul Menzel
2024-01-19 15:11 ` Jörg Rödel
@ 2024-01-19 17:57 ` Christian A. Ehrhardt
2024-01-22 12:16 ` Paul Menzel
2024-01-22 12:53 ` Baolu Lu
2 siblings, 1 reply; 8+ messages in thread
From: Christian A. Ehrhardt @ 2024-01-19 17:57 UTC (permalink / raw)
To: Paul Menzel; +Cc: Jörg Rödel, Will Deacon, iommu, linux-kernel
Hi Paul,
On Fri, Jan 19, 2024 at 01:59:29PM +0100, Paul Menzel wrote:
> On a Dell XPS 13 9360 Linux 6.6.8, 6.6.11 and 6.7 (and earlier versions) log
> the lines below when resuming from ACPI S3 (deep):
>
> [ 0.000000] Linux version 6.7-amd64 (debian-kernel@lists.debian.org)
> (x86_64-linux-gnu-gcc-13 (Debian 13.2.0-9) 13.2.0, GNU ld (GNU Binutils for
> Debian) 2.41.50.20231227) #1 SMP PREEMPT_DYNAMIC Debian 6.7-1~exp1
> (2024-01-08)
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7-amd64
> root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer
> mem_sleep_default=deep log_buf_len=8M
> […]
> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
> […]
> [ 99.711230] PM: suspend entry (deep)
> […]
> [ 99.722101] printk: Suspending console(s) (use no_console_suspend to
> debug)
> [ 100.285178] ACPI: EC: interrupt blocked
> [ 100.319908] ACPI: PM: Preparing to enter system sleep state S3
> [ 100.331793] ACPI: EC: event blocked
> [ 100.331798] ACPI: EC: EC stopped
> [ 100.331800] ACPI: PM: Saving platform NVS memory
> [ 100.335224] Disabling non-boot CPUs ...
> [ 100.337412] smpboot: CPU 1 is now offline
> [ 100.341065] smpboot: CPU 2 is now offline
> [ 100.346441] smpboot: CPU 3 is now offline
> [ 100.353086] ACPI: PM: Low-level resume complete
> [ 100.353129] ACPI: EC: EC started
> [ 100.353129] ACPI: PM: Restoring platform NVS memory
> [ 100.355219] Enabling non-boot CPUs ...
> [ 100.355244] smpboot: Booting Node 0 Processor 1 APIC 0x2
> [ 100.355954] CPU1 is up
> [ 100.355972] smpboot: Booting Node 0 Processor 2 APIC 0x1
> [ 100.356698] CPU2 is up
> [ 100.356716] smpboot: Booting Node 0 Processor 3 APIC 0x3
> [ 100.357371] CPU3 is up
> [ 100.360217] ACPI: PM: Waking up from system sleep state S3
> [ 100.668380] ACPI: EC: interrupt unblocked
> [ 100.668598] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS
> workaround enabled
> [ 100.668606] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS
> workaround enabled
> [ 100.668643] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS
> workaround enabled
> [ 100.690996] DMAR: DRHD: handling fault status reg 2
> [ 100.691001] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index
> 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
>
> But I am unable to find the device f0:1f.0:
This is probably an ACPI enumerated device. These are platform
devices that pose as a PCI device for the purpose of interrupt
remapping but do not enumerate via PCI. The PCI ID assigned to
these hidden devices is enumerated via ANDD entries in the
DMAR table. You can decode this table with from
/sys/firmware/acpi/tables/DMAR with iasl to verify.
Your dmesg shows two ANDD records for your I2C controllers,
so somehwo the I2C controller is sending interrups that DMAR
doesn't like (probably because the I2C controller is not yet
resumed properly).
Thus my guess is that this is an issue with the suspend/resume hooks
of the I2C controllers not with the IOMMU.
regards Christian
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`
2024-01-19 17:57 ` Christian A. Ehrhardt
@ 2024-01-22 12:16 ` Paul Menzel
2024-01-22 13:22 ` Christian A. Ehrhardt
0 siblings, 1 reply; 8+ messages in thread
From: Paul Menzel @ 2024-01-22 12:16 UTC (permalink / raw)
To: Christian A. Ehrhardt
Cc: Jörg Rödel, Will Deacon, iommu, linux-kernel,
Mike Jones, linux-i2c, linux-acpi, Hans de Goede
[-- Attachment #1: Type: text/plain, Size: 4962 bytes --]
[Cc: +linux-i2c, +linux-acpi, +Hans, cf original message [1]]
Dear Christian,
Thank you for your reply.
Am 19.01.24 um 18:57 schrieb Christian A. Ehrhardt:
> On Fri, Jan 19, 2024 at 01:59:29PM +0100, Paul Menzel wrote:
>> On a Dell XPS 13 9360 Linux 6.6.8, 6.6.11 and 6.7 (and earlier versions) log
>> the lines below when resuming from ACPI S3 (deep):
>>
>> [ 0.000000] Linux version 6.7-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-13 (Debian 13.2.0-9) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41.50.20231227) #1 SMP PREEMPT_DYNAMIC Debian 6.7-1~exp1 (2024-01-08)
>> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7-amd64 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M
>> […]
>> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
>> […]
>> [ 99.711230] PM: suspend entry (deep)
>> […]
>> [ 99.722101] printk: Suspending console(s) (use no_console_suspend to debug)
>> [ 100.285178] ACPI: EC: interrupt blocked
>> [ 100.319908] ACPI: PM: Preparing to enter system sleep state S3
>> [ 100.331793] ACPI: EC: event blocked
>> [ 100.331798] ACPI: EC: EC stopped
>> [ 100.331800] ACPI: PM: Saving platform NVS memory
>> [ 100.335224] Disabling non-boot CPUs ...
>> [ 100.337412] smpboot: CPU 1 is now offline
>> [ 100.341065] smpboot: CPU 2 is now offline
>> [ 100.346441] smpboot: CPU 3 is now offline
>> [ 100.353086] ACPI: PM: Low-level resume complete
>> [ 100.353129] ACPI: EC: EC started
>> [ 100.353129] ACPI: PM: Restoring platform NVS memory
>> [ 100.355219] Enabling non-boot CPUs ...
>> [ 100.355244] smpboot: Booting Node 0 Processor 1 APIC 0x2
>> [ 100.355954] CPU1 is up
>> [ 100.355972] smpboot: Booting Node 0 Processor 2 APIC 0x1
>> [ 100.356698] CPU2 is up
>> [ 100.356716] smpboot: Booting Node 0 Processor 3 APIC 0x3
>> [ 100.357371] CPU3 is up
>> [ 100.360217] ACPI: PM: Waking up from system sleep state S3
>> [ 100.668380] ACPI: EC: interrupt unblocked
>> [ 100.668598] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
>> [ 100.668606] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
>> [ 100.668643] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
>> [ 100.690996] DMAR: DRHD: handling fault status reg 2
>> [ 100.691001] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
>>
>> But I am unable to find the device f0:1f.0:
>
> This is probably an ACPI enumerated device. These are platform
> devices that pose as a PCI device for the purpose of interrupt
> remapping but do not enumerate via PCI. The PCI ID assigned to
> these hidden devices is enumerated via ANDD entries in the
> DMAR table. You can decode this table with from
> /sys/firmware/acpi/tables/DMAR with iasl to verify.
I disassembled it with `iasl -d` (attached), and there are indeed two
devices:
[058h 0088 001h] Device Scope Type : 03 [IOAPIC Device]
[059h 0089 001h] Entry Length : 08
[05Ah 0090 002h] Reserved : 0000
[05Ch 0092 001h] Enumeration ID : 02
[05Dh 0093 001h] PCI Bus Number : F0
[05Eh 0094 002h] PCI Path : 1F,00
[060h 0096 001h] Device Scope Type : 04 [Message-capable
HPET Device]
[061h 0097 001h] Entry Length : 08
[062h 0098 002h] Reserved : 0000
[064h 0100 001h] Enumeration ID : 00
[065h 0101 001h] PCI Bus Number : 00
[066h 0102 002h] PCI Path : 1F,00
$ grep Name DMAR.dsl
* Format: [HexOffset DecimalOffset ByteLength] FieldName :
FieldValue (in hex)
[068h 0104 001h] Device Scope Type : 05 [Namespace Device]
[070h 0112 001h] Device Scope Type : 05 [Namespace Device]
[0B8h 0184 002h] Subtable Type : 0004 [ACPI Namespace
Device Declaration]
[0C0h 0192 00Fh] Device Name : "\_SB.PCI0.I2C0"
[0D4h 0212 002h] Subtable Type : 0004 [ACPI Namespace
Device Declaration]
[0DCh 0220 00Fh] Device Name : "\_SB.PCI0.I2C1"
> Your dmesg shows two ANDD records for your I2C controllers,
> so somehow the I2C controller is sending interrupts that DMAR
> doesn't like (probably because the I2C controller is not yet
> resumed properly).
>
> Thus my guess is that this is an issue with the suspend/resume hooks
> of the I2C controllers not with the IOMMU.
I am adding the Linux I2C and ACPI folks. Maybe they have an idea.
Kind regards,
Paul
[1]:
https://lore.kernel.org/all/5517f76a-94ad-452c-bae6-34ecc0ec4831@molgen.mpg.de/
[-- Attachment #2: DMAR.dsl --]
[-- Type: text/x-dsl, Size: 6577 bytes --]
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20230628 (64-bit version)
* Copyright (c) 2000 - 2023 Intel Corporation
*
* Disassembly of DMAR, Sat Jan 20 09:34:20 2024
*
* ACPI Data Table [DMAR]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue (in hex)
*/
[000h 0000 004h] Signature : "DMAR" [DMA Remapping Table]
[004h 0004 004h] Table Length : 000000F0
[008h 0008 001h] Revision : 01
[009h 0009 001h] Checksum : 08
[00Ah 0010 006h] Oem ID : "INTEL "
[010h 0016 008h] Oem Table ID : "KBL "
[018h 0024 004h] Oem Revision : 00000001
[01Ch 0028 004h] Asl Compiler ID : "INTL"
[020h 0032 004h] Asl Compiler Revision : 00000001
[024h 0036 001h] Host Address Width : 26
[025h 0037 001h] Flags : 01
[026h 0038 00Ah] Reserved : 00 00 00 00 00 00 00 00 00 00
[030h 0048 002h] Subtable Type : 0000 [Hardware Unit Definition]
[032h 0050 002h] Length : 0018
[034h 0052 001h] Flags : 00
[035h 0053 001h] Reserved : 00
[036h 0054 002h] PCI Segment Number : 0000
[038h 0056 008h] Register Base Address : 00000000FED90000
[040h 0064 001h] Device Scope Type : 01 [PCI Endpoint Device]
[041h 0065 001h] Entry Length : 08
[042h 0066 002h] Reserved : 0000
[044h 0068 001h] Enumeration ID : 00
[045h 0069 001h] PCI Bus Number : 00
[046h 0070 002h] PCI Path : 02,00
[048h 0072 002h] Subtable Type : 0000 [Hardware Unit Definition]
[04Ah 0074 002h] Length : 0030
[04Ch 0076 001h] Flags : 01
[04Dh 0077 001h] Reserved : 00
[04Eh 0078 002h] PCI Segment Number : 0000
[050h 0080 008h] Register Base Address : 00000000FED91000
[058h 0088 001h] Device Scope Type : 03 [IOAPIC Device]
[059h 0089 001h] Entry Length : 08
[05Ah 0090 002h] Reserved : 0000
[05Ch 0092 001h] Enumeration ID : 02
[05Dh 0093 001h] PCI Bus Number : F0
[05Eh 0094 002h] PCI Path : 1F,00
[060h 0096 001h] Device Scope Type : 04 [Message-capable HPET Device]
[061h 0097 001h] Entry Length : 08
[062h 0098 002h] Reserved : 0000
[064h 0100 001h] Enumeration ID : 00
[065h 0101 001h] PCI Bus Number : 00
[066h 0102 002h] PCI Path : 1F,00
[068h 0104 001h] Device Scope Type : 05 [Namespace Device]
[069h 0105 001h] Entry Length : 08
[06Ah 0106 002h] Reserved : 0000
[06Ch 0108 001h] Enumeration ID : 01
[06Dh 0109 001h] PCI Bus Number : 00
[06Eh 0110 002h] PCI Path : 15,00
[070h 0112 001h] Device Scope Type : 05 [Namespace Device]
[071h 0113 001h] Entry Length : 08
[072h 0114 002h] Reserved : 0000
[074h 0116 001h] Enumeration ID : 02
[075h 0117 001h] PCI Bus Number : 00
[076h 0118 002h] PCI Path : 15,01
[078h 0120 002h] Subtable Type : 0001 [Reserved Memory Region]
[07Ah 0122 002h] Length : 0020
[07Ch 0124 002h] Reserved : 0000
[07Eh 0126 002h] PCI Segment Number : 0000
[080h 0128 008h] Base Address : 0000000064EC2000
[088h 0136 008h] End Address (limit) : 0000000064EE1FFF
[090h 0144 001h] Device Scope Type : 01 [PCI Endpoint Device]
[091h 0145 001h] Entry Length : 08
[092h 0146 002h] Reserved : 0000
[094h 0148 001h] Enumeration ID : 00
[095h 0149 001h] PCI Bus Number : 00
[096h 0150 002h] PCI Path : 14,00
[098h 0152 002h] Subtable Type : 0001 [Reserved Memory Region]
[09Ah 0154 002h] Length : 0020
[09Ch 0156 002h] Reserved : 0000
[09Eh 0158 002h] PCI Segment Number : 0000
[0A0h 0160 008h] Base Address : 000000007A000000
[0A8h 0168 008h] End Address (limit) : 000000007C7FFFFF
[0B0h 0176 001h] Device Scope Type : 01 [PCI Endpoint Device]
[0B1h 0177 001h] Entry Length : 08
[0B2h 0178 002h] Reserved : 0000
[0B4h 0180 001h] Enumeration ID : 00
[0B5h 0181 001h] PCI Bus Number : 00
[0B6h 0182 002h] PCI Path : 02,00
[0B8h 0184 002h] Subtable Type : 0004 [ACPI Namespace Device Declaration]
[0BAh 0186 002h] Length : 001C
[0BCh 0188 003h] Reserved : 000000
[0BFh 0191 001h] Device Number : 01
[0C0h 0192 00Fh] Device Name : "\_SB.PCI0.I2C0"
[0D4h 0212 002h] Subtable Type : 0004 [ACPI Namespace Device Declaration]
[0D6h 0214 002h] Length : 001C
[0D8h 0216 003h] Reserved : 000000
[0DBh 0219 001h] Device Number : 02
[0DCh 0220 00Fh] Device Name : "\_SB.PCI0.I2C1"
Raw Table Data: Length 240 (0xF0)
0000: 44 4D 41 52 F0 00 00 00 01 08 49 4E 54 45 4C 20 // DMAR......INTEL
0010: 4B 42 4C 20 00 00 00 00 01 00 00 00 49 4E 54 4C // KBL ........INTL
0020: 01 00 00 00 26 01 00 00 00 00 00 00 00 00 00 00 // ....&...........
0030: 00 00 18 00 00 00 00 00 00 00 D9 FE 00 00 00 00 // ................
0040: 01 08 00 00 00 00 02 00 00 00 30 00 01 00 00 00 // ..........0.....
0050: 00 10 D9 FE 00 00 00 00 03 08 00 00 02 F0 1F 00 // ................
0060: 04 08 00 00 00 00 1F 00 05 08 00 00 01 00 15 00 // ................
0070: 05 08 00 00 02 00 15 01 01 00 20 00 00 00 00 00 // .......... .....
0080: 00 20 EC 64 00 00 00 00 FF 1F EE 64 00 00 00 00 // . .d.......d....
0090: 01 08 00 00 00 00 14 00 01 00 20 00 00 00 00 00 // .......... .....
00A0: 00 00 00 7A 00 00 00 00 FF FF 7F 7C 00 00 00 00 // ...z.......|....
00B0: 01 08 00 00 00 00 02 00 04 00 1C 00 00 00 00 01 // ................
00C0: 5C 5F 53 42 2E 50 43 49 30 2E 49 32 43 30 00 00 // \_SB.PCI0.I2C0..
00D0: 00 00 00 00 04 00 1C 00 00 00 00 02 5C 5F 53 42 // ............\_SB
00E0: 2E 50 43 49 30 2E 49 32 43 31 00 00 00 00 00 00 // .PCI0.I2C1......
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`
2024-01-22 12:16 ` Paul Menzel
@ 2024-01-22 13:22 ` Christian A. Ehrhardt
0 siblings, 0 replies; 8+ messages in thread
From: Christian A. Ehrhardt @ 2024-01-22 13:22 UTC (permalink / raw)
To: Paul Menzel
Cc: Jörg Rödel, Will Deacon, iommu, linux-kernel,
Mike Jones, linux-i2c, linux-acpi, Hans de Goede
Hi Paul,
On Mon, Jan 22, 2024 at 01:16:25PM +0100, Paul Menzel wrote:
> [Cc: +linux-i2c, +linux-acpi, +Hans, cf original message [1]]
>
> Dear Christian,
>
>
> Thank you for your reply.
>
> Am 19.01.24 um 18:57 schrieb Christian A. Ehrhardt:
>
> > On Fri, Jan 19, 2024 at 01:59:29PM +0100, Paul Menzel wrote:
> > > On a Dell XPS 13 9360 Linux 6.6.8, 6.6.11 and 6.7 (and earlier versions) log
> > > the lines below when resuming from ACPI S3 (deep):
> > >
> > > [ 0.000000] Linux version 6.7-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-13 (Debian 13.2.0-9) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41.50.20231227) #1 SMP PREEMPT_DYNAMIC Debian 6.7-1~exp1 (2024-01-08)
> > > [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7-amd64 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M
> > > […]
> > > [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
> > > […]
> > > [ 99.711230] PM: suspend entry (deep)
> > > […]
> > > [ 99.722101] printk: Suspending console(s) (use no_console_suspend to debug)
> > > [ 100.285178] ACPI: EC: interrupt blocked
> > > [ 100.319908] ACPI: PM: Preparing to enter system sleep state S3
> > > [ 100.331793] ACPI: EC: event blocked
> > > [ 100.331798] ACPI: EC: EC stopped
> > > [ 100.331800] ACPI: PM: Saving platform NVS memory
> > > [ 100.335224] Disabling non-boot CPUs ...
> > > [ 100.337412] smpboot: CPU 1 is now offline
> > > [ 100.341065] smpboot: CPU 2 is now offline
> > > [ 100.346441] smpboot: CPU 3 is now offline
> > > [ 100.353086] ACPI: PM: Low-level resume complete
> > > [ 100.353129] ACPI: EC: EC started
> > > [ 100.353129] ACPI: PM: Restoring platform NVS memory
> > > [ 100.355219] Enabling non-boot CPUs ...
> > > [ 100.355244] smpboot: Booting Node 0 Processor 1 APIC 0x2
> > > [ 100.355954] CPU1 is up
> > > [ 100.355972] smpboot: Booting Node 0 Processor 2 APIC 0x1
> > > [ 100.356698] CPU2 is up
> > > [ 100.356716] smpboot: Booting Node 0 Processor 3 APIC 0x3
> > > [ 100.357371] CPU3 is up
> > > [ 100.360217] ACPI: PM: Waking up from system sleep state S3
> > > [ 100.668380] ACPI: EC: interrupt unblocked
> > > [ 100.668598] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
> > > [ 100.668606] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
> > > [ 100.668643] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
> > > [ 100.690996] DMAR: DRHD: handling fault status reg 2
> > > [ 100.691001] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request
> > >
> > > But I am unable to find the device f0:1f.0:
> >
> > This is probably an ACPI enumerated device. These are platform
> > devices that pose as a PCI device for the purpose of interrupt
> > remapping but do not enumerate via PCI. The PCI ID assigned to
> > these hidden devices is enumerated via ANDD entries in the
> > DMAR table. You can decode this table with from
> > /sys/firmware/acpi/tables/DMAR with iasl to verify.
>
> I disassembled it with `iasl -d` (attached), and there are indeed two
> devices:
>
> [058h 0088 001h] Device Scope Type : 03 [IOAPIC Device]
> [059h 0089 001h] Entry Length : 08
> [05Ah 0090 002h] Reserved : 0000
> [05Ch 0092 001h] Enumeration ID : 02
> [05Dh 0093 001h] PCI Bus Number : F0
^^
>
> [05Eh 0094 002h] PCI Path : 1F,00
^^^^^
So your device that generates the errror message is the IO-APIC
and not your I2C controllers (these pose as 00:15.0 and 00:15.1).
Sorry for the wrong direction.
AFAIR the IO-APIC must be programmed to send remappable interrupts
if it is used with an IOMMU and interrupt remapping. So at this point
I'd start to look at the resume code of the IO-APIC next.
Just a wild guess, but if this is the same machine that has the
i8042 problems after resume, the problematic interrupt might be
that of the PS/2 controller.
regards Christian
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`
2024-01-19 12:59 Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0` Paul Menzel
2024-01-19 15:11 ` Jörg Rödel
2024-01-19 17:57 ` Christian A. Ehrhardt
@ 2024-01-22 12:53 ` Baolu Lu
2024-01-22 13:45 ` Christian A. Ehrhardt
2 siblings, 1 reply; 8+ messages in thread
From: Baolu Lu @ 2024-01-22 12:53 UTC (permalink / raw)
To: Paul Menzel, Jörg Rödel, Will Deacon
Cc: baolu.lu, iommu, linux-kernel
On 2024/1/19 20:59, Paul Menzel wrote:
> Dear Linux folks,
>
>
> On a Dell XPS 13 9360 Linux 6.6.8, 6.6.11 and 6.7 (and earlier versions)
> log the lines below when resuming from ACPI S3 (deep):
>
> [ 0.000000] Linux version 6.7-amd64
> (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-13 (Debian
> 13.2.0-9) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41.50.20231227) #1
> SMP PREEMPT_DYNAMIC Debian 6.7-1~exp1 (2024-01-08)
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7-amd64
> root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer
> mem_sleep_default=deep log_buf_len=8M
> […]
> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0
> 06/02/2022
> […]
> [ 99.711230] PM: suspend entry (deep)
> […]
> [ 99.722101] printk: Suspending console(s) (use
> no_console_suspend to debug)
> [ 100.285178] ACPI: EC: interrupt blocked
> [ 100.319908] ACPI: PM: Preparing to enter system sleep state S3
> [ 100.331793] ACPI: EC: event blocked
> [ 100.331798] ACPI: EC: EC stopped
> [ 100.331800] ACPI: PM: Saving platform NVS memory
> [ 100.335224] Disabling non-boot CPUs ...
> [ 100.337412] smpboot: CPU 1 is now offline
> [ 100.341065] smpboot: CPU 2 is now offline
> [ 100.346441] smpboot: CPU 3 is now offline
> [ 100.353086] ACPI: PM: Low-level resume complete
> [ 100.353129] ACPI: EC: EC started
> [ 100.353129] ACPI: PM: Restoring platform NVS memory
> [ 100.355219] Enabling non-boot CPUs ...
> [ 100.355244] smpboot: Booting Node 0 Processor 1 APIC 0x2
> [ 100.355954] CPU1 is up
> [ 100.355972] smpboot: Booting Node 0 Processor 2 APIC 0x1
> [ 100.356698] CPU2 is up
> [ 100.356716] smpboot: Booting Node 0 Processor 3 APIC 0x3
> [ 100.357371] CPU3 is up
> [ 100.360217] ACPI: PM: Waking up from system sleep state S3
> [ 100.668380] ACPI: EC: interrupt unblocked
> [ 100.668598] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS
> workaround enabled
> [ 100.668606] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS
> workaround enabled
> [ 100.668643] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS
> workaround enabled
> [ 100.690996] DMAR: DRHD: handling fault status reg 2
> [ 100.691001] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault
> index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt
> request
>
> But I am unable to find the device f0:1f.0:
>
> $ lspci -nn
> 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th
> Gen Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
> 00:02.0 VGA compatible controller [0300]: Intel Corporation HD
> Graphics 620 [8086:5916] (rev 02)
> 00:04.0 Signal processing controller [1180]: Intel Corporation Xeon
> E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
> [8086:1903] (rev 02)
> 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP
> USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
> 00:14.2 Signal processing controller [1180]: Intel Corporation
> Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
> 00:15.0 Signal processing controller [1180]: Intel Corporation
> Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
> 00:15.1 Signal processing controller [1180]: Intel Corporation
> Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
> 00:16.0 Communication controller [0780]: Intel Corporation Sunrise
> Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
> 00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
> Express Root Port #1 [8086:9d10] (rev f1)
> 00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
> Express Root Port #5 [8086:9d14] (rev f1)
> 00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
> Express Root Port #9 [8086:9d18] (rev f1)
> 00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC
> Controller [8086:9d58] (rev 21)
> 00:1f.2 Memory controller [0580]: Intel Corporation Sunrise
> Point-LP PMC [8086:9d21] (rev 21)
> 00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD
> Audio [8086:9d71] (rev 21)
> 00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus
> [8086:9d23] (rev 21)
> 01:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
> 02:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
> 02:01.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
> 02:02.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
> 39:00.0 USB controller [0c03]: Intel Corporation DSL6340 USB 3.1
> Controller [Alpine Ridge] [8086:15b5]
> 3a:00.0 Network controller [0280]: Qualcomm Atheros QCA6174
> 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
> 3b:00.0 Non-Volatile memory controller [0108]: SK hynix PC300 NVMe
> Solid State Drive 512GB [1c5c:1284]
>
> As this is logged as an error, can this be fixed somehow?
This appears to be a platform problem. The hidden device (f0:1f.0) is
not visible to the OS, so no driver can program the interrupt remapping
table for the device's interrupts.
Best regards,
baolu
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`
2024-01-22 12:53 ` Baolu Lu
@ 2024-01-22 13:45 ` Christian A. Ehrhardt
2024-01-25 9:37 ` Ethan Zhao
0 siblings, 1 reply; 8+ messages in thread
From: Christian A. Ehrhardt @ 2024-01-22 13:45 UTC (permalink / raw)
To: Baolu Lu
Cc: Paul Menzel, Jörg Rödel, Will Deacon, iommu, linux-kernel
Hi,
On Mon, Jan 22, 2024 at 08:53:43PM +0800, Baolu Lu wrote:
> On 2024/1/19 20:59, Paul Menzel wrote:
> > Dear Linux folks,
> >
> >
> > On a Dell XPS 13 9360 Linux 6.6.8, 6.6.11 and 6.7 (and earlier versions)
> > log the lines below when resuming from ACPI S3 (deep):
> >
> > [ 0.000000] Linux version 6.7-amd64
> > (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-13 (Debian
> > 13.2.0-9) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41.50.20231227) #1
> > SMP PREEMPT_DYNAMIC Debian 6.7-1~exp1 (2024-01-08)
> > [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7-amd64
> > root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer
> > mem_sleep_default=deep log_buf_len=8M
> > […]
> > [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0
> > 06/02/2022
> > […]
> > [ 99.711230] PM: suspend entry (deep)
> > […]
> > [ 99.722101] printk: Suspending console(s) (use
> > no_console_suspend to debug)
> > [ 100.285178] ACPI: EC: interrupt blocked
> > [ 100.319908] ACPI: PM: Preparing to enter system sleep state S3
> > [ 100.331793] ACPI: EC: event blocked
> > [ 100.331798] ACPI: EC: EC stopped
> > [ 100.331800] ACPI: PM: Saving platform NVS memory
> > [ 100.335224] Disabling non-boot CPUs ...
> > [ 100.337412] smpboot: CPU 1 is now offline
> > [ 100.341065] smpboot: CPU 2 is now offline
> > [ 100.346441] smpboot: CPU 3 is now offline
> > [ 100.353086] ACPI: PM: Low-level resume complete
> > [ 100.353129] ACPI: EC: EC started
> > [ 100.353129] ACPI: PM: Restoring platform NVS memory
> > [ 100.355219] Enabling non-boot CPUs ...
> > [ 100.355244] smpboot: Booting Node 0 Processor 1 APIC 0x2
> > [ 100.355954] CPU1 is up
> > [ 100.355972] smpboot: Booting Node 0 Processor 2 APIC 0x1
> > [ 100.356698] CPU2 is up
> > [ 100.356716] smpboot: Booting Node 0 Processor 3 APIC 0x3
> > [ 100.357371] CPU3 is up
> > [ 100.360217] ACPI: PM: Waking up from system sleep state S3
> > [ 100.668380] ACPI: EC: interrupt unblocked
> > [ 100.668598] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS
> > workaround enabled
> > [ 100.668606] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS
> > workaround enabled
> > [ 100.668643] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS
> > workaround enabled
> > [ 100.690996] DMAR: DRHD: handling fault status reg 2
> > [ 100.691001] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault
> > index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt
> > request
> >
> > But I am unable to find the device f0:1f.0:
> >
> > $ lspci -nn
> > 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th
> > Gen Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
> > 00:02.0 VGA compatible controller [0300]: Intel Corporation HD
> > Graphics 620 [8086:5916] (rev 02)
> > 00:04.0 Signal processing controller [1180]: Intel Corporation Xeon
> > E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
> > [8086:1903] (rev 02)
> > 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP
> > USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
> > 00:14.2 Signal processing controller [1180]: Intel Corporation
> > Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
> > 00:15.0 Signal processing controller [1180]: Intel Corporation
> > Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
> > 00:15.1 Signal processing controller [1180]: Intel Corporation
> > Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
> > 00:16.0 Communication controller [0780]: Intel Corporation Sunrise
> > Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
> > 00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
> > Express Root Port #1 [8086:9d10] (rev f1)
> > 00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
> > Express Root Port #5 [8086:9d14] (rev f1)
> > 00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
> > Express Root Port #9 [8086:9d18] (rev f1)
> > 00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC
> > Controller [8086:9d58] (rev 21)
> > 00:1f.2 Memory controller [0580]: Intel Corporation Sunrise
> > Point-LP PMC [8086:9d21] (rev 21)
> > 00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD
> > Audio [8086:9d71] (rev 21)
> > 00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus
> > [8086:9d23] (rev 21)
> > 01:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> > Bridge [Alpine Ridge 2C 2015] [8086:1576]
> > 02:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> > Bridge [Alpine Ridge 2C 2015] [8086:1576]
> > 02:01.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> > Bridge [Alpine Ridge 2C 2015] [8086:1576]
> > 02:02.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
> > Bridge [Alpine Ridge 2C 2015] [8086:1576]
> > 39:00.0 USB controller [0c03]: Intel Corporation DSL6340 USB 3.1
> > Controller [Alpine Ridge] [8086:15b5]
> > 3a:00.0 Network controller [0280]: Qualcomm Atheros QCA6174
> > 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
> > 3b:00.0 Non-Volatile memory controller [0108]: SK hynix PC300 NVMe
> > Solid State Drive 512GB [1c5c:1284]
> >
> > As this is logged as an error, can this be fixed somehow?
>
> This appears to be a platform problem. The hidden device (f0:1f.0) is
> not visible to the OS, so no driver can program the interrupt remapping
> table for the device's interrupts.
The hidden device has been identified as the IO-APIC. It is visible
and properly declared to use 0f:1f.0 in the DMAR table.
regards Christian
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`
2024-01-22 13:45 ` Christian A. Ehrhardt
@ 2024-01-25 9:37 ` Ethan Zhao
0 siblings, 0 replies; 8+ messages in thread
From: Ethan Zhao @ 2024-01-25 9:37 UTC (permalink / raw)
To: Christian A. Ehrhardt, Baolu Lu
Cc: Paul Menzel, Jörg Rödel, Will Deacon, iommu, linux-kernel
On 1/22/2024 9:45 PM, Christian A. Ehrhardt wrote:
> Hi,
>
> On Mon, Jan 22, 2024 at 08:53:43PM +0800, Baolu Lu wrote:
>> On 2024/1/19 20:59, Paul Menzel wrote:
>>> Dear Linux folks,
>>>
>>>
>>> On a Dell XPS 13 9360 Linux 6.6.8, 6.6.11 and 6.7 (and earlier versions)
>>> log the lines below when resuming from ACPI S3 (deep):
>>>
>>> [ 0.000000] Linux version 6.7-amd64
>>> (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-13 (Debian
>>> 13.2.0-9) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41.50.20231227) #1
>>> SMP PREEMPT_DYNAMIC Debian 6.7-1~exp1 (2024-01-08)
>>> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7-amd64
>>> root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer
>>> mem_sleep_default=deep log_buf_len=8M
>>> […]
>>> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0
>>> 06/02/2022
>>> […]
>>> [ 99.711230] PM: suspend entry (deep)
>>> […]
>>> [ 99.722101] printk: Suspending console(s) (use
>>> no_console_suspend to debug)
>>> [ 100.285178] ACPI: EC: interrupt blocked
>>> [ 100.319908] ACPI: PM: Preparing to enter system sleep state S3
>>> [ 100.331793] ACPI: EC: event blocked
>>> [ 100.331798] ACPI: EC: EC stopped
>>> [ 100.331800] ACPI: PM: Saving platform NVS memory
>>> [ 100.335224] Disabling non-boot CPUs ...
>>> [ 100.337412] smpboot: CPU 1 is now offline
>>> [ 100.341065] smpboot: CPU 2 is now offline
>>> [ 100.346441] smpboot: CPU 3 is now offline
>>> [ 100.353086] ACPI: PM: Low-level resume complete
>>> [ 100.353129] ACPI: EC: EC started
>>> [ 100.353129] ACPI: PM: Restoring platform NVS memory
>>> [ 100.355219] Enabling non-boot CPUs ...
>>> [ 100.355244] smpboot: Booting Node 0 Processor 1 APIC 0x2
>>> [ 100.355954] CPU1 is up
>>> [ 100.355972] smpboot: Booting Node 0 Processor 2 APIC 0x1
>>> [ 100.356698] CPU2 is up
>>> [ 100.356716] smpboot: Booting Node 0 Processor 3 APIC 0x3
>>> [ 100.357371] CPU3 is up
>>> [ 100.360217] ACPI: PM: Waking up from system sleep state S3
>>> [ 100.668380] ACPI: EC: interrupt unblocked
>>> [ 100.668598] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS
>>> workaround enabled
>>> [ 100.668606] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS
>>> workaround enabled
>>> [ 100.668643] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS
>>> workaround enabled
>>> [ 100.690996] DMAR: DRHD: handling fault status reg 2
>>> [ 100.691001] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault
>>> index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt
>>> request
>>>
>>> But I am unable to find the device f0:1f.0:
>>>
>>> $ lspci -nn
>>> 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th
>>> Gen Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
>>> 00:02.0 VGA compatible controller [0300]: Intel Corporation HD
>>> Graphics 620 [8086:5916] (rev 02)
>>> 00:04.0 Signal processing controller [1180]: Intel Corporation Xeon
>>> E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
>>> [8086:1903] (rev 02)
>>> 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP
>>> USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
>>> 00:14.2 Signal processing controller [1180]: Intel Corporation
>>> Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
>>> 00:15.0 Signal processing controller [1180]: Intel Corporation
>>> Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
>>> 00:15.1 Signal processing controller [1180]: Intel Corporation
>>> Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
>>> 00:16.0 Communication controller [0780]: Intel Corporation Sunrise
>>> Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
>>> 00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
>>> Express Root Port #1 [8086:9d10] (rev f1)
>>> 00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
>>> Express Root Port #5 [8086:9d14] (rev f1)
>>> 00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI
>>> Express Root Port #9 [8086:9d18] (rev f1)
>>> 00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC
>>> Controller [8086:9d58] (rev 21)
>>> 00:1f.2 Memory controller [0580]: Intel Corporation Sunrise
>>> Point-LP PMC [8086:9d21] (rev 21)
>>> 00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD
>>> Audio [8086:9d71] (rev 21)
>>> 00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus
>>> [8086:9d23] (rev 21)
>>> 01:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
>>> Bridge [Alpine Ridge 2C 2015] [8086:1576]
>>> 02:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
>>> Bridge [Alpine Ridge 2C 2015] [8086:1576]
>>> 02:01.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
>>> Bridge [Alpine Ridge 2C 2015] [8086:1576]
>>> 02:02.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3
>>> Bridge [Alpine Ridge 2C 2015] [8086:1576]
>>> 39:00.0 USB controller [0c03]: Intel Corporation DSL6340 USB 3.1
>>> Controller [Alpine Ridge] [8086:15b5]
>>> 3a:00.0 Network controller [0280]: Qualcomm Atheros QCA6174
>>> 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
>>> 3b:00.0 Non-Volatile memory controller [0108]: SK hynix PC300 NVMe
>>> Solid State Drive 512GB [1c5c:1284]
>>>
>>> As this is logged as an error, can this be fixed somehow?
>> This appears to be a platform problem. The hidden device (f0:1f.0) is
>> not visible to the OS, so no driver can program the interrupt remapping
>> table for the device's interrupts.
> The hidden device has been identified as the IO-APIC. It is visible
> and properly declared to use 0f:1f.0 in the DMAR table.
Didn't see the warning
"Compatibility-format IRQs enabled despite intr remapping;\n"
"you are vulnerable to IRQ injection.\n");
So assume the DMA_GSTS_CFIS bit of GSTS_REG shows the interrupt
remapping was programmed to the right behaviour -- Compatibility
format interrupts are blocked.
But the device f0:1f.0 is still armed to inject compatible format interrupt
that is dangerous mistake if not be blocked, so far no such exception
that should be passed through, appears not iommu issue per my
understanding.
Thanks,
Ethan
>
> regards Christian
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2024-01-25 9:38 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-01-19 12:59 Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0` Paul Menzel
2024-01-19 15:11 ` Jörg Rödel
2024-01-19 17:57 ` Christian A. Ehrhardt
2024-01-22 12:16 ` Paul Menzel
2024-01-22 13:22 ` Christian A. Ehrhardt
2024-01-22 12:53 ` Baolu Lu
2024-01-22 13:45 ` Christian A. Ehrhardt
2024-01-25 9:37 ` Ethan Zhao
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.