From: Mohit Kumar <mohit.kumar@st.com>
To: <linux-pci@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>
Cc: Pratyush Anand <pratyush.anand@st.com>,
Mohit Kumar <mohit.kumar@st.com>,
Viresh Kumar <viresh.linux@gmail.com>, <spear-devel@list.st.com>
Subject: [PATCH 02/12] SPEAr13xx: Move SPEAr1340 definitions to header file
Date: Wed, 11 Dec 2013 15:08:27 +0530 [thread overview]
Message-ID: <9ae7b152da13c094b024c54d27187aab96e439b3.1386752447.git.mohit.kumar@st.com> (raw)
In-Reply-To: <cover.1386752447.git.mohit.kumar@st.com>
From: Pratyush Anand <pratyush.anand@st.com>
Move SPEAr1340 definitions to header files so that theese can be used by
other code too.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Cc: Mohit Kumar <mohit.kumar@st.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: spear-devel@list.st.com
Cc: linux-arm-kernel@lists.infradead.org
---
arch/arm/mach-spear/include/mach/spear.h | 55 ++++++++++++++++++++++++++++++
arch/arm/mach-spear/spear1340.c | 54 -----------------------------
2 files changed, 55 insertions(+), 54 deletions(-)
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
index 5cdc53d..4526f75 100644
--- a/arch/arm/mach-spear/include/mach/spear.h
+++ b/arch/arm/mach-spear/include/mach/spear.h
@@ -86,6 +86,61 @@
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE UART_BASE
+/* PCIe/SATA Base addresses */
+#define SPEAR1340_SATA_BASE UL(0xB1000000)
+#define SPEAR1340_PCIE_BASE UL(0xB1000000)
+
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
+#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104)
+#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108)
+
+#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318)
+#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C)
+#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320)
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424)
+ /* PCIE CFG MASks */
+ #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11)
+ #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10)
+ #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9)
+ #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8)
+ #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4)
+ #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3)
+ #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2)
+ #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1)
+ #define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
+ #define SPEAR1340_PCIE_SATA_SEL_SATA (1)
+ #define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F
+ #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
+ SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+ SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+ SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+ SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+ #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
+ SPEAR1340_SATA_CFG_PM_CLK_EN | \
+ SPEAR1340_SATA_CFG_POWERUP_RESET | \
+ SPEAR1340_SATA_CFG_RX_CLK_EN | \
+ SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428)
+ #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
+ #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+ (SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+
#endif /* SPEAR13XX */
#endif /* __MACH_SPEAR_H */
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 3fb6834..1b47609 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -22,60 +22,6 @@
#include <mach/spear.h>
/* FIXME: Move SATA PHY code into a standalone driver */
-
-/* Base addresses */
-#define SPEAR1340_SATA_BASE UL(0xB1000000)
-
-/* Power Management Registers */
-#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
-#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104)
-#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108)
-
-#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318)
-#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C)
-#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320)
-
-/* PCIE - SATA configuration registers */
-#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424)
- /* PCIE CFG MASks */
- #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11)
- #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10)
- #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9)
- #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8)
- #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4)
- #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3)
- #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2)
- #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1)
- #define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
- #define SPEAR1340_PCIE_SATA_SEL_SATA (1)
- #define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F
- #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
- SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
- SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
- SPEAR1340_PCIE_CFG_POWERUP_RESET | \
- SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
- #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
- SPEAR1340_SATA_CFG_PM_CLK_EN | \
- SPEAR1340_SATA_CFG_POWERUP_RESET | \
- SPEAR1340_SATA_CFG_RX_CLK_EN | \
- SPEAR1340_SATA_CFG_TX_CLK_EN)
-
-#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428)
- #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31)
- #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27)
- #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
- #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
- #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
- (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
- SPEAR1340_MIPHY_CLK_REF_DIV2 | \
- SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
- (SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
- (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
- SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
-
/* SATA device registration */
static int sata_miphy_init(struct device *dev, void __iomem *addr)
{
--
1.7.0.1
WARNING: multiple messages have this Message-ID (diff)
From: mohit.kumar@st.com (Mohit Kumar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/12] SPEAr13xx: Move SPEAr1340 definitions to header file
Date: Wed, 11 Dec 2013 15:08:27 +0530 [thread overview]
Message-ID: <9ae7b152da13c094b024c54d27187aab96e439b3.1386752447.git.mohit.kumar@st.com> (raw)
In-Reply-To: <cover.1386752447.git.mohit.kumar@st.com>
From: Pratyush Anand <pratyush.anand@st.com>
Move SPEAr1340 definitions to header files so that theese can be used by
other code too.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Cc: Mohit Kumar <mohit.kumar@st.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: spear-devel at list.st.com
Cc: linux-arm-kernel at lists.infradead.org
---
arch/arm/mach-spear/include/mach/spear.h | 55 ++++++++++++++++++++++++++++++
arch/arm/mach-spear/spear1340.c | 54 -----------------------------
2 files changed, 55 insertions(+), 54 deletions(-)
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
index 5cdc53d..4526f75 100644
--- a/arch/arm/mach-spear/include/mach/spear.h
+++ b/arch/arm/mach-spear/include/mach/spear.h
@@ -86,6 +86,61 @@
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE UART_BASE
+/* PCIe/SATA Base addresses */
+#define SPEAR1340_SATA_BASE UL(0xB1000000)
+#define SPEAR1340_PCIE_BASE UL(0xB1000000)
+
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
+#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104)
+#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108)
+
+#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318)
+#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C)
+#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320)
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424)
+ /* PCIE CFG MASks */
+ #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11)
+ #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10)
+ #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9)
+ #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8)
+ #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4)
+ #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3)
+ #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2)
+ #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1)
+ #define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
+ #define SPEAR1340_PCIE_SATA_SEL_SATA (1)
+ #define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F
+ #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
+ SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+ SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+ SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+ SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+ #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
+ SPEAR1340_SATA_CFG_PM_CLK_EN | \
+ SPEAR1340_SATA_CFG_POWERUP_RESET | \
+ SPEAR1340_SATA_CFG_RX_CLK_EN | \
+ SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428)
+ #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
+ #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+ (SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+
#endif /* SPEAR13XX */
#endif /* __MACH_SPEAR_H */
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 3fb6834..1b47609 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -22,60 +22,6 @@
#include <mach/spear.h>
/* FIXME: Move SATA PHY code into a standalone driver */
-
-/* Base addresses */
-#define SPEAR1340_SATA_BASE UL(0xB1000000)
-
-/* Power Management Registers */
-#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
-#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104)
-#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108)
-
-#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318)
-#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C)
-#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320)
-
-/* PCIE - SATA configuration registers */
-#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424)
- /* PCIE CFG MASks */
- #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11)
- #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10)
- #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9)
- #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8)
- #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4)
- #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3)
- #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2)
- #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1)
- #define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
- #define SPEAR1340_PCIE_SATA_SEL_SATA (1)
- #define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F
- #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
- SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
- SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
- SPEAR1340_PCIE_CFG_POWERUP_RESET | \
- SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
- #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
- SPEAR1340_SATA_CFG_PM_CLK_EN | \
- SPEAR1340_SATA_CFG_POWERUP_RESET | \
- SPEAR1340_SATA_CFG_RX_CLK_EN | \
- SPEAR1340_SATA_CFG_TX_CLK_EN)
-
-#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428)
- #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31)
- #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27)
- #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
- #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
- #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
- (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
- SPEAR1340_MIPHY_CLK_REF_DIV2 | \
- SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
- (SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
- (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
- SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
-
/* SATA device registration */
static int sata_miphy_init(struct device *dev, void __iomem *addr)
{
--
1.7.0.1
next prev parent reply other threads:[~2013-12-11 9:39 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-11 9:38 [PATCH 00/12] PCI:Add SPEAr13xx PCie support Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-11 9:38 ` [PATCH 01/12] SPEAr13xx: Correct dt field name for stmmac phy-addr Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-11 11:09 ` Rajeev kumar
2013-12-11 11:09 ` Rajeev kumar
2013-12-11 11:14 ` Rajeev kumar
2013-12-11 11:14 ` Rajeev kumar
2013-12-12 0:39 ` Jingoo Han
2013-12-12 0:39 ` Jingoo Han
2013-12-12 3:59 ` Rajeev kumar
2013-12-12 3:59 ` Rajeev kumar
2013-12-12 4:07 ` Chen-Yu Tsai
2013-12-12 4:07 ` Chen-Yu Tsai
2013-12-12 5:13 ` Mohit KUMAR DCG
2013-12-12 5:13 ` Mohit KUMAR DCG
2013-12-12 5:13 ` Mohit KUMAR DCG
2013-12-11 9:38 ` Mohit Kumar [this message]
2013-12-11 9:38 ` [PATCH 02/12] SPEAr13xx: Move SPEAr1340 definitions to header file Mohit Kumar
2013-12-11 22:48 ` Arnd Bergmann
2013-12-11 22:48 ` Arnd Bergmann
2013-12-13 4:18 ` Mohit KUMAR DCG
2013-12-13 4:18 ` Mohit KUMAR DCG
2013-12-14 19:02 ` Arnd Bergmann
2013-12-14 19:02 ` Arnd Bergmann
2014-01-16 7:25 ` Mohit KUMAR DCG
2014-01-16 7:25 ` Mohit KUMAR DCG
2014-01-16 9:19 ` Pratyush Anand
2014-01-16 9:19 ` Pratyush Anand
2014-01-16 11:33 ` Arnd Bergmann
2014-01-16 11:33 ` Arnd Bergmann
2014-01-16 11:45 ` Pratyush Anand
2014-01-16 11:45 ` Pratyush Anand
2013-12-11 9:38 ` [PATCH 03/12] SPEAr13xx: Add SPEAr1310 PCIe register definitions Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-11 22:51 ` Arnd Bergmann
2013-12-11 22:51 ` Arnd Bergmann
2013-12-11 9:38 ` [PATCH 04/12] SPEAr13xx: Fix static mapping table Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-11 9:38 ` [PATCH 05/12] clk: SPEAr13xx: Fix pcie clock name Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-11 22:42 ` Arnd Bergmann
2013-12-11 22:42 ` Arnd Bergmann
2013-12-12 5:00 ` Mohit KUMAR DCG
2013-12-12 5:00 ` Mohit KUMAR DCG
2013-12-12 21:30 ` Arnd Bergmann
2013-12-12 21:30 ` Arnd Bergmann
2013-12-11 9:38 ` [PATCH 06/12] pcie: designware: Move register definition to the header file Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-11 11:38 ` Jagan Teki
2013-12-11 11:38 ` Jagan Teki
2013-12-11 11:55 ` Mohit KUMAR DCG
2013-12-11 11:55 ` Mohit KUMAR DCG
2013-12-11 12:04 ` Jagan Teki
2013-12-11 12:04 ` Jagan Teki
2013-12-11 21:31 ` Arnd Bergmann
2013-12-11 21:31 ` Arnd Bergmann
2013-12-11 22:48 ` Jingoo Han
2013-12-11 22:48 ` Jingoo Han
2013-12-12 4:55 ` Mohit KUMAR DCG
2013-12-12 4:55 ` Mohit KUMAR DCG
2013-12-11 9:38 ` [PATCH 07/12] pcie: designware: add dw_pcie prefix before cfg_read/write Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-11 11:40 ` Jagan Teki
2013-12-11 11:40 ` Jagan Teki
2013-12-12 1:12 ` Jingoo Han
2013-12-12 1:12 ` Jingoo Han
2013-12-12 1:05 ` Jingoo Han
2013-12-12 1:05 ` Jingoo Han
2013-12-20 16:35 ` Bjorn Helgaas
2013-12-20 16:35 ` Bjorn Helgaas
2013-12-11 9:38 ` [PATCH 08/12] pcie: designware: Fix IO transfers Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-11 10:03 ` Marek Vasut
2013-12-11 10:03 ` Marek Vasut
2013-12-11 11:29 ` Jagan Teki
2013-12-11 11:29 ` Jagan Teki
2013-12-12 1:17 ` Jingoo Han
2013-12-12 1:17 ` Jingoo Han
2013-12-20 3:47 ` Pratyush Anand
2013-12-20 3:47 ` Pratyush Anand
2013-12-11 13:34 ` Arnd Bergmann
2013-12-11 13:34 ` Arnd Bergmann
2013-12-11 23:34 ` Jingoo Han
2013-12-11 23:34 ` Jingoo Han
2013-12-20 16:36 ` Bjorn Helgaas
2013-12-20 16:36 ` Bjorn Helgaas
2013-12-11 9:38 ` [PATCH 09/12] pcie: SPEAr13xx: Add designware pcie support Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-11 23:00 ` Arnd Bergmann
2013-12-11 23:00 ` Arnd Bergmann
2013-12-13 4:30 ` Mohit KUMAR DCG
2013-12-13 4:30 ` Mohit KUMAR DCG
2013-12-13 4:57 ` Jingoo Han
2013-12-13 4:57 ` Jingoo Han
2013-12-14 19:01 ` Arnd Bergmann
2013-12-14 19:01 ` Arnd Bergmann
2013-12-11 9:38 ` [PATCH 10/12] SPEAr13xx: defconfig: Update Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-11 10:47 ` Rajeev kumar
2013-12-11 10:47 ` Rajeev kumar
2013-12-12 4:47 ` Mohit KUMAR DCG
2013-12-12 4:47 ` Mohit KUMAR DCG
2013-12-11 9:38 ` [PATCH 11/12] MAINTAINERS: Add ST SPEAr13xx PCIe driver maintainer Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
2013-12-12 1:55 ` Jingoo Han
2013-12-12 1:55 ` Jingoo Han
2013-12-11 9:38 ` [PATCH 12/12] MAINTAINERS: Add Synopsis Designware " Mohit Kumar
2013-12-11 9:38 ` Mohit Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9ae7b152da13c094b024c54d27187aab96e439b3.1386752447.git.mohit.kumar@st.com \
--to=mohit.kumar@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=pratyush.anand@st.com \
--cc=spear-devel@list.st.com \
--cc=viresh.linux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.