From: Florian Fainelli <f.fainelli@gmail.com>
To: Eric Anholt <eric@anholt.net>,
linux-arm-kernel@lists.infradead.org, Lee Jones <lee@kernel.org>,
Florian Fainelli <f.fainelli@gmail.com>,
Olof Johansson <olof@lixom.net>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Stephen Warren <swarren@wwwdotorg.org>,
Stefan Wahren <stefan.wahren@i2se.com>,
bcm-kernel-feedback-list@broadcom.com,
Gerd Hoffmann <kraxel@redhat.com>
Subject: Re: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v4)
Date: Thu, 20 Apr 2017 10:07:32 -0700 [thread overview]
Message-ID: <9c076a1e-267a-1a66-7cc0-9dd5bf59c5a8@gmail.com> (raw)
In-Reply-To: <20170330002605.15213-1-eric@anholt.net>
On 03/29/2017 05:26 PM, Eric Anholt wrote:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel. It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
>
> v1: Gerd's patch that put the ../../../arm64/... link in the Makefile
> v2: Michael's patch that #included from ../../../arm64/... in a new
> bcm2837-rpi-3-b.dts.
> v3: Mine, using symlinks to make sure that we don't break the split DT
> tree.
> v4: Rely on the new include/arm64 symlink.
>
> Assuming positive review feedback, I assume it would be acceptable to
> merge the shared/dt-symlinks branch in a PR of my own for the 32-bit
> DT branch?
Either that, or I can take it directly through devicetree/next whichever
you prefer. We have not gotten feedback on whether this looks acceptable
or not though...
>
> arch/arm/boot/dts/Makefile | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..27d258cb50f2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
> bcm2835-rpi-b-plus.dtb \
> bcm2835-rpi-a-plus.dtb \
> bcm2836-rpi-2-b.dtb \
> + include/arm64/broadcom/bcm2837-rpi-3-b.dtb \
> bcm2835-rpi-zero.dtb
> dtb-$(CONFIG_ARCH_BCM_5301X) += \
> bcm4708-asus-rt-ac56u.dtb \
>
--
Florian
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Lee Jones <lee-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
Gerd Hoffmann <kraxel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: Re: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v4)
Date: Thu, 20 Apr 2017 10:07:32 -0700 [thread overview]
Message-ID: <9c076a1e-267a-1a66-7cc0-9dd5bf59c5a8@gmail.com> (raw)
In-Reply-To: <20170330002605.15213-1-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
On 03/29/2017 05:26 PM, Eric Anholt wrote:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel. It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
>
> Signed-off-by: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
> ---
>
> v1: Gerd's patch that put the ../../../arm64/... link in the Makefile
> v2: Michael's patch that #included from ../../../arm64/... in a new
> bcm2837-rpi-3-b.dts.
> v3: Mine, using symlinks to make sure that we don't break the split DT
> tree.
> v4: Rely on the new include/arm64 symlink.
>
> Assuming positive review feedback, I assume it would be acceptable to
> merge the shared/dt-symlinks branch in a PR of my own for the 32-bit
> DT branch?
Either that, or I can take it directly through devicetree/next whichever
you prefer. We have not gotten feedback on whether this looks acceptable
or not though...
>
> arch/arm/boot/dts/Makefile | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..27d258cb50f2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
> bcm2835-rpi-b-plus.dtb \
> bcm2835-rpi-a-plus.dtb \
> bcm2836-rpi-2-b.dtb \
> + include/arm64/broadcom/bcm2837-rpi-3-b.dtb \
> bcm2835-rpi-zero.dtb
> dtb-$(CONFIG_ARCH_BCM_5301X) += \
> bcm4708-asus-rt-ac56u.dtb \
>
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: f.fainelli@gmail.com (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v4)
Date: Thu, 20 Apr 2017 10:07:32 -0700 [thread overview]
Message-ID: <9c076a1e-267a-1a66-7cc0-9dd5bf59c5a8@gmail.com> (raw)
In-Reply-To: <20170330002605.15213-1-eric@anholt.net>
On 03/29/2017 05:26 PM, Eric Anholt wrote:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel. It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
>
> v1: Gerd's patch that put the ../../../arm64/... link in the Makefile
> v2: Michael's patch that #included from ../../../arm64/... in a new
> bcm2837-rpi-3-b.dts.
> v3: Mine, using symlinks to make sure that we don't break the split DT
> tree.
> v4: Rely on the new include/arm64 symlink.
>
> Assuming positive review feedback, I assume it would be acceptable to
> merge the shared/dt-symlinks branch in a PR of my own for the 32-bit
> DT branch?
Either that, or I can take it directly through devicetree/next whichever
you prefer. We have not gotten feedback on whether this looks acceptable
or not though...
>
> arch/arm/boot/dts/Makefile | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..27d258cb50f2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
> bcm2835-rpi-b-plus.dtb \
> bcm2835-rpi-a-plus.dtb \
> bcm2836-rpi-2-b.dtb \
> + include/arm64/broadcom/bcm2837-rpi-3-b.dtb \
> bcm2835-rpi-zero.dtb
> dtb-$(CONFIG_ARCH_BCM_5301X) += \
> bcm4708-asus-rt-ac56u.dtb \
>
--
Florian
next prev parent reply other threads:[~2017-04-20 17:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-30 0:26 [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v4) Eric Anholt
2017-03-30 0:26 ` Eric Anholt
2017-03-30 0:26 ` Eric Anholt
2017-04-20 17:07 ` Florian Fainelli [this message]
2017-04-20 17:07 ` Florian Fainelli
2017-04-20 17:07 ` Florian Fainelli
2017-04-20 20:12 ` Eric Anholt
2017-04-20 20:12 ` Eric Anholt
2017-04-20 20:12 ` Eric Anholt
2017-04-24 18:26 ` Olof Johansson
2017-04-24 18:26 ` Olof Johansson
2017-04-24 18:26 ` Olof Johansson
2017-04-24 20:01 ` Eric Anholt
2017-04-24 20:01 ` Eric Anholt
2017-04-24 20:01 ` Eric Anholt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9c076a1e-267a-1a66-7cc0-9dd5bf59c5a8@gmail.com \
--to=f.fainelli@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=eric@anholt.net \
--cc=kraxel@redhat.com \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=stefan.wahren@i2se.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.