Counts for qgroup id are different

* Counts for qgroup id are different
@ 2020-10-06 14:27 JMinson
  2020-10-07  0:13 ` Qu Wenruo
  0 siblings, 1 reply; 6+ messages in thread
From: JMinson @ 2020-10-06 14:27 UTC (permalink / raw)
  To: BTRFS Kernel

[-- Attachment #1: Type: text/plain, Size: 1329 bytes --]

Linux linux-desktop 5.4.0-48-generic #52-Ubuntu SMP Thu Sep 10 10:58:49 
UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

btrfs-progs v5.4.1

Label: 'Daily'  uuid: 1426edb8-4fed-419a-b0f1-d131b97224fd
         Total devices 1 FS bytes used 1.13TiB
         devid    1 size 1.82TiB used 1.14TiB path /dev/sdb

I use rsync to backup to an external btrfs formatted usb drive . The 
process is :

mount btrfs volume "/Daily"

take a snapshot of subvolume "BackupRoot" and give the snapshot a name 
like "snap@BackupRoot-2020-10-05-Oct-1601938835"

run rsync with the destination being "/Daily/BackupRoot"

unmount the btrfs volume "/Daily"

I've been using this procedure for about 6 months and is far as I know 
all the data is good . However I discovered yesterday that when I run 
btrfsck I get 1 or more of these

Counts for qgroup id: 0/1561 are different
our:            referenced 1051233288192 referenced compressed 1051233288192
disk:           referenced 1046914453504 referenced compressed 1046914453504
diff:           referenced 4318834688 referenced compressed 4318834688
our:            exclusive 1206681600 exclusive compressed 1206681600
disk:           exclusive 1206681600 exclusive compressed 1206681600

Is this something to be concerned about ?

[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 74802 bytes --]

Linux version 5.4.0-48-generic (buildd@lcy01-amd64-010) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #52-Ubuntu SMP Thu Sep 10 10:58:49 UTC 2020 (Ubuntu 5.4.0-48.52-generic 5.4.60)
Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic root=UUID=a852ccfd-0201-47bd-900f-65706cc23c09 ro quiet splash vt.handoff=7
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009e0ffff] usable
BIOS-e820: [mem 0x0000000009e10000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000514dafff] usable
BIOS-e820: [mem 0x00000000514db000-0x00000000514f5fff] ACPI data
BIOS-e820: [mem 0x00000000514f6000-0x000000005a3b0fff] usable
BIOS-e820: [mem 0x000000005a3b1000-0x000000005a4c8fff] reserved
BIOS-e820: [mem 0x000000005a4c9000-0x000000005a4d6fff] ACPI data
BIOS-e820: [mem 0x000000005a4d7000-0x000000005a5d9fff] usable
BIOS-e820: [mem 0x000000005a5da000-0x000000005a994fff] ACPI NVS
BIOS-e820: [mem 0x000000005a995000-0x000000005b782fff] reserved
BIOS-e820: [mem 0x000000005b783000-0x000000005dffffff] usable
BIOS-e820: [mem 0x000000005e000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f33ffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x34d7b018-0x34d88457] usable ==> usable
e820: update [mem 0x34d7b018-0x34d88457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009e0ffff] usable
reserve setup_data: [mem 0x0000000009e10000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
reserve setup_data: [mem 0x000000000a20b000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x0000000034d7b017] usable
reserve setup_data: [mem 0x0000000034d7b018-0x0000000034d88457] usable
reserve setup_data: [mem 0x0000000034d88458-0x00000000514dafff] usable
reserve setup_data: [mem 0x00000000514db000-0x00000000514f5fff] ACPI data
reserve setup_data: [mem 0x00000000514f6000-0x000000005a3b0fff] usable
reserve setup_data: [mem 0x000000005a3b1000-0x000000005a4c8fff] reserved
reserve setup_data: [mem 0x000000005a4c9000-0x000000005a4d6fff] ACPI data
reserve setup_data: [mem 0x000000005a4d7000-0x000000005a5d9fff] usable
reserve setup_data: [mem 0x000000005a5da000-0x000000005a994fff] ACPI NVS
reserve setup_data: [mem 0x000000005a995000-0x000000005b782fff] reserved
reserve setup_data: [mem 0x000000005b783000-0x000000005dffffff] usable
reserve setup_data: [mem 0x000000005e000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd100000-0x00000000fd1fffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041f33ffff] usable
efi: EFI v2.60 by American Megatrends
efi:  ACPI 2.0=0x514db000  ACPI=0x514db000  SMBIOS=0x5b651000  SMBIOS 3.0=0x5b650000  ESRT=0x57fc7318  MEMATTR=0x57d29018 
secureboot: Secure boot disabled
SMBIOS 3.1.1 present.
DMI: System manufacturer System Product Name/PRIME B450M-A, BIOS 2202 07/14/2020
tsc: Fast TSC calibration using PIT
tsc: Detected 3899.784 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41f340 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFE0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0x5e000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000057fc7318 to 0x0000000057fc7350.
e820: update [mem 0x57fc7000-0x57fc7fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x34d89000-0x3a0b9fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000514DB000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000514DB0A8 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000514E6490 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000514DB200 00B28F (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x000000005A97EE00 000040
ACPI: APIC 0x00000000514E65A8 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000514E6708 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x00000000514E6750 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000514E67F0 000094 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
ACPI: SSDT 0x00000000514F4B30 0010AF (v01 AMD    AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000514E68E0 005419 (v02 AMD    AmdTable 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000514EBD00 00378A (v01 AMD    AMD AOD  00000001 INTL 20120913)
ACPI: MCFG 0x00000000514EF490 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000514EF4D0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: UEFI 0x00000000514EF508 000042 (v01                 00000000      00000000)
ACPI: BGRT 0x00000000514EF550 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: IVRS 0x00000000514EF588 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
ACPI: SSDT 0x00000000514EF658 00119C (v01 AMD    AMD CPU  00000001 AMD  00000001)
ACPI: CRAT 0x00000000514F07F8 000810 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
ACPI: CDIT 0x00000000514F1008 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
ACPI: SSDT 0x00000000514F1038 000C34 (v01 AMD    AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000514F1C70 0010AC (v01 AMD    AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000514F2D20 001D4A (v01 AMD    AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000514F4A70 0000BF (v01 AMD    AMD PT   00001000 INTL 20120913)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f33ffff]
NODE_DATA(0) allocated [mem 0x41f315000-0x41f33ffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000041f33ffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x0000000009e0ffff]
  node   0: [mem 0x000000000a000000-0x000000000a1fffff]
  node   0: [mem 0x000000000a20b000-0x000000000affffff]
  node   0: [mem 0x000000000b020000-0x00000000514dafff]
  node   0: [mem 0x00000000514f6000-0x000000005a3b0fff]
  node   0: [mem 0x000000005a4d7000-0x000000005a5d9fff]
  node   0: [mem 0x000000005b783000-0x000000005dffffff]
  node   0: [mem 0x0000000100000000-0x000000041f33ffff]
Zeroed struct page in unavailable ranges: 16934 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f33ffff]
On node 0 totalpages: 3653082
  DMA zone: 64 pages used for memmap
  DMA zone: 27 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 5868 pages used for memmap
  DMA32 zone: 375547 pages, LIFO batch:63
  Normal zone: 51149 pages used for memmap
  Normal zone: 3273536 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0x56dd9000-0x56eccfff] usable ==> reserved
smpboot: Allowing 32 CPUs, 24 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09e10000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0x34d7b000-0x34d7bfff]
PM: Registered nosave memory: [mem 0x34d88000-0x34d88fff]
PM: Registered nosave memory: [mem 0x514db000-0x514f5fff]
PM: Registered nosave memory: [mem 0x56dd9000-0x56eccfff]
PM: Registered nosave memory: [mem 0x57fc7000-0x57fc7fff]
PM: Registered nosave memory: [mem 0x5a3b1000-0x5a4c8fff]
PM: Registered nosave memory: [mem 0x5a4c9000-0x5a4d6fff]
PM: Registered nosave memory: [mem 0x5a5da000-0x5a994fff]
PM: Registered nosave memory: [mem 0x5a995000-0x5b782fff]
PM: Registered nosave memory: [mem 0x5e000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
PM: Registered nosave memory: [mem 0xfd100000-0xfd1fffff]
PM: Registered nosave memory: [mem 0xfd200000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
Built 1 zonelists, mobility grouping on.  Total pages: 3595974
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic root=UUID=a852ccfd-0201-47bd-900f-65706cc23c09 ro quiet splash vt.handoff=7
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 14090784K/14612328K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 521544K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 44523 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
	Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x706d1f4a50e, max_idle_ns: 881591101222 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7799.56 BogoMIPS (lpj=15599136)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Vulnerable
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 5 2400G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 4
smpboot: Total of 8 processors activated (62396.54 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
PM: Registering ACPI NVS region [mem 0x5a5da000-0x5a994fff] (3911680 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 09:58:40, date: 2020-10-06
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1601978320.160:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:01.6: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.6: enabling Extended Tags
pci 0000:00:01.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
pci 0000:01:00.0: [1022:43d5] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601
pci 0000:01:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff]
pci 0000:01:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:01:00.1: PME# supported from D3hot D3cold
pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400
pci 0000:01:00.2: enabling Extended Tags
pci 0000:01:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.2: PCI bridge to [bus 01-06]
pci 0000:00:01.2:   bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400
pci 0000:02:04.0: enabling Extended Tags
pci 0000:02:04.0: PME# supported from D3hot D3cold
pci 0000:02:05.0: [1022:43c7] type 01 class 0x060400
pci 0000:02:05.0: enabling Extended Tags
pci 0000:02:05.0: PME# supported from D3hot D3cold
pci 0000:02:06.0: [1022:43c7] type 01 class 0x060400
pci 0000:02:06.0: enabling Extended Tags
pci 0000:02:06.0: PME# supported from D3hot D3cold
pci 0000:01:00.2: PCI bridge to [bus 02-06]
pci 0000:01:00.2:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xfcc00000-0xfcc01fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:04.0: PCI bridge to [bus 04]
pci 0000:02:04.0:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:02:05.0: PCI bridge to [bus 05]
pci 0000:02:06.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [144d:a808] type 00 class 0x010802
pci 0000:07:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
pci 0000:00:01.6: PCI bridge to [bus 07]
pci 0000:00:01.6:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:08:00.0: [1002:15dd] type 00 class 0x030000
pci 0000:08:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:08:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:08:00.0: reg 0x20: [io  0xf000-0xf0ff]
pci 0000:08:00.0: reg 0x24: [mem 0xfcb00000-0xfcb7ffff]
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.0: BAR 0: assigned to efifb
pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:00.1: [1002:15de] type 00 class 0x040300
pci 0000:08:00.1: reg 0x10: [mem 0xfcb88000-0xfcb8bfff]
pci 0000:08:00.1: enabling Extended Tags
pci 0000:08:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:00.2: [1022:15df] type 00 class 0x108000
pci 0000:08:00.2: reg 0x18: [mem 0xfca00000-0xfcafffff]
pci 0000:08:00.2: reg 0x24: [mem 0xfcb8c000-0xfcb8dfff]
pci 0000:08:00.2: enabling Extended Tags
pci 0000:08:00.3: [1022:15e0] type 00 class 0x0c0330
pci 0000:08:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
pci 0000:08:00.3: enabling Extended Tags
pci 0000:08:00.3: PME# supported from D0 D3hot D3cold
pci 0000:08:00.4: [1022:15e1] type 00 class 0x0c0330
pci 0000:08:00.4: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit]
pci 0000:08:00.4: enabling Extended Tags
pci 0000:08:00.4: PME# supported from D0 D3hot D3cold
pci 0000:08:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:08:00.6: reg 0x10: [mem 0xfcb80000-0xfcb87fff]
pci 0000:08:00.6: enabling Extended Tags
pci 0000:08:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 08]
pci 0000:00:08.1:   bridge window [io  0xf000-0xffff]
pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcbfffff]
pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:09:00.0: [1022:7901] type 00 class 0x010601
pci 0000:09:00.0: reg 0x24: [mem 0xfce00000-0xfce007ff]
pci 0000:09:00.0: enabling Extended Tags
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 09]
pci 0000:00:08.2:   bridge window [mem 0xfce00000-0xfcefffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Translated 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:08:00.0: vgaarb: setting as boot VGA device
pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:08:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09e10000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0x34d7b018-0x37ffffff]
e820: reserve RAM buffer [mem 0x514db000-0x53ffffff]
e820: reserve RAM buffer [mem 0x56dd9000-0x57ffffff]
e820: reserve RAM buffer [mem 0x57fc7000-0x57ffffff]
e820: reserve RAM buffer [mem 0x5a3b1000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5a5da000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5e000000-0x5fffffff]
e820: reserve RAM buffer [mem 0x41f340000-0x41fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x60000000-0xdfffffff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x0300-0x030f] has been reserved
system 00:03: [io  0x0230-0x023f] has been reserved
system 00:03: [io  0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: [io  0x040b] has been reserved
system 00:05: [io  0x04d6] has been reserved
system 00:05: [io  0x0c00-0x0c01] has been reserved
system 00:05: [io  0x0c14] has been reserved
system 00:05: [io  0x0c50-0x0c51] has been reserved
system 00:05: [io  0x0c52] has been reserved
system 00:05: [io  0x0c6c] has been reserved
system 00:05: [io  0x0c6f] has been reserved
system 00:05: [io  0x0cd0-0x0cd1] has been reserved
system 00:05: [io  0x0cd2-0x0cd3] has been reserved
system 00:05: [io  0x0cd4-0x0cd5] has been reserved
system 00:05: [io  0x0cd6-0x0cd7] has been reserved
system 00:05: [io  0x0cd8-0x0cdf] has been reserved
system 00:05: [io  0x0800-0x089f] has been reserved
system 00:05: [io  0x0b00-0x0b0f] has been reserved
system 00:05: [io  0x0b20-0x0b3f] has been reserved
system 00:05: [io  0x0900-0x090f] has been reserved
system 00:05: [io  0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:04.0: PCI bridge to [bus 04]
pci 0000:02:04.0:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:02:05.0: PCI bridge to [bus 05]
pci 0000:02:06.0: PCI bridge to [bus 06]
pci 0000:01:00.2: PCI bridge to [bus 02-06]
pci 0000:01:00.2:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:00:01.2: PCI bridge to [bus 01-06]
pci 0000:00:01.2:   bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:00:01.6: PCI bridge to [bus 07]
pci 0000:00:01.6:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:08.1: PCI bridge to [bus 08]
pci 0000:00:08.1:   bridge window [io  0xf000-0xffff]
pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcbfffff]
pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:08.2: PCI bridge to [bus 09]
pci 0000:00:08.2:   bridge window [mem 0xfce00000-0xfcefffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfcc00000-0xfcdfffff]
pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfccfffff]
pci_bus 0000:04: resource 1 [mem 0xfcc00000-0xfccfffff]
pci_bus 0000:07: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:08: resource 0 [io  0xf000-0xffff]
pci_bus 0000:08: resource 1 [mem 0xfc800000-0xfcbfffff]
pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xfce00000-0xfcefffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:08:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:08:00.1: D0 power state depends on 0000:08:00.0
pci 0000:08:00.3: extending delay after power-on from D3hot to 20 msec
pci 0000:08:00.4: extending delay after power-on from D3hot to 20 msec
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initramfs unpacking failed: Decoding failed
Freeing initrd memory: 85188K
pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.2: Adding to iommu group 1
pci 0000:00:01.6: Adding to iommu group 2
pci 0000:00:08.0: Adding to iommu group 3
pci 0000:00:08.1: Adding to iommu group 4
pci 0000:00:08.2: Adding to iommu group 5
pci 0000:00:14.0: Adding to iommu group 6
pci 0000:00:14.3: Adding to iommu group 6
pci 0000:00:18.0: Adding to iommu group 7
pci 0000:00:18.1: Adding to iommu group 7
pci 0000:00:18.2: Adding to iommu group 7
pci 0000:00:18.3: Adding to iommu group 7
pci 0000:00:18.4: Adding to iommu group 7
pci 0000:00:18.5: Adding to iommu group 7
pci 0000:00:18.6: Adding to iommu group 7
pci 0000:00:18.7: Adding to iommu group 7
pci 0000:01:00.0: Adding to iommu group 8
pci 0000:01:00.1: Adding to iommu group 8
pci 0000:01:00.2: Adding to iommu group 8
pci 0000:02:00.0: Adding to iommu group 8
pci 0000:02:04.0: Adding to iommu group 8
pci 0000:02:05.0: Adding to iommu group 8
pci 0000:02:06.0: Adding to iommu group 8
pci 0000:04:00.0: Adding to iommu group 8
pci 0000:07:00.0: Adding to iommu group 9
pci 0000:08:00.0: Adding to iommu group 10
pci 0000:08:00.0: Using iommu direct mapping
pci 0000:08:00.1: Adding to iommu group 11
pci 0000:08:00.2: Adding to iommu group 11
pci 0000:08:00.3: Adding to iommu group 11
pci 0000:08:00.4: Adding to iommu group 11
pci 0000:08:00.6: Adding to iommu group 11
pci 0000:09:00.0: Adding to iommu group 12
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada):
 PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.2: AER: enabled with IRQ 26
pcieport 0000:00:01.6: AER: enabled with IRQ 27
pcieport 0000:00:08.2: AER: enabled with IRQ 29
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xe0000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
usb usb2: SerialNumber: 0000:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:08:00.3: xHCI Host Controller
xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:08:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
usb usb3: SerialNumber: 0000:08:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:08:00.3: xHCI Host Controller
xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:08:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
usb usb4: SerialNumber: 0000:08:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:08:00.4: xHCI Host Controller
xhci_hcd 0000:08:00.4: new USB bus registered, assigned bus number 5
xhci_hcd 0000:08:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
usb usb5: SerialNumber: 0000:08:00.4
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
xhci_hcd 0000:08:00.4: xHCI Host Controller
xhci_hcd 0000:08:00.4: new USB bus registered, assigned bus number 6
xhci_hcd 0000:08:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
usb usb6: SerialNumber: 0000:08:00.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08101016
microcode: CPU1: patch_level=0x08101016
microcode: CPU2: patch_level=0x08101016
microcode: CPU3: patch_level=0x08101016
microcode: CPU4: patch_level=0x08101016
microcode: CPU5: patch_level=0x08101016
microcode: CPU6: patch_level=0x08101016
microcode: CPU7: patch_level=0x08101016
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (583703485, 314256315)->(1019342496, -121382696)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 5aa626cbe865232f20021a0a6b2c5343f252875d'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 8:869:979
rtc_cmos 00:02: setting system clock to 2020-10-06T09:58:41 UTC (1601978321)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2716K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1188K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
ahci 0000:01:00.1: version 3.0
ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
scsi host0: ahci
nvme nvme0: pci function 0000:07:00.0
scsi host1: ahci
scsi host2: ahci
cryptd: max_cpu_qlen set to 1000
scsi host3: ahci
scsi host4: ahci
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 57
ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 57
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 57
ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 57
ata7: DUMMY
ata8: DUMMY
ahci 0000:09:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
scsi host8: ahci
ata9: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 61
[drm] amdgpu kernel modesetting enabled.
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add APU node [0x0:0x0]
Finished initializing topology
amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
amdgpu 0000:08:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfcb00000 -> 0xfcb7ffff
checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
amdgpu 0000:08:00.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1043:0x876B 0xC6).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <gfx_v9_0>
[drm] add ip block number 5 <sdma_v4_0>
[drm] add ip block number 6 <powerplay>
[drm] add ip block number 7 <dm>
[drm] add ip block number 8 <vcn_v1_0>
[drm] BIOS signature incorrect 0 0
ATOM BIOS: 113-PICASSO-115
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] VCN jpeg decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:08:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
amdgpu 0000:08:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
amdgpu 0000:08:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=2048M
[drm] RAM width 128bits DDR4
[TTM] Zone  kernel: Available graphics memory: 7162618 KiB
[TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[drm] use_doorbell being set to: [true]
amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu
[drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[drm] PSP loading VCN firmware
[drm] reserve 0x400000 from 0xf47f800000 for PSP TMR
usb 1-5: new full-speed USB device number 2 using xhci_hcd
usb 3-4: new high-speed USB device number 2 using xhci_hcd
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
nvme nvme0: 32/0/0 default/read/poll queues
 nvme0n1: p1 p2 p3 p4 < p5 >
usb 3-4: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.01
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: USB2.0 Hub             
usb 3-4: Manufacturer: VIA Labs, Inc.         
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB:	 1500000 in kHz, 4399 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB:	 300000 in kHz, 3649 in mV
[drm] DM_PPLIB:	 600000 in kHz, 4074 in mV
[drm] DM_PPLIB:	 626000 in kHz, 4250 in mV
[drm] DM_PPLIB:	 654000 in kHz, 4399 in mV
[drm] Display Core initialized with v3.2.48!
ata9: SATA link down (SStatus 0 SControl 300)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] VCN decode and encode initialized successfully(under SPG Mode).
kfd kfd: Allocated 3969056 bytes on gart
Topology: Add APU node [0x15dd:0x1002]
kfd kfd: added device 1002:15dd
[drm] fb mappable at 0x60BC1000
[drm] vram apper at 0x60000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
fbcon: Deferring console take-over
amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 4 ports detected
amdgpu 0000:08:00.0: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:08:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:08:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:08:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:08:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:08:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:08:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:08:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:08:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:08:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:08:00.0: ring sdma0 uses VM inv eng 0 on hub 1
amdgpu 0000:08:00.0: ring vcn_dec uses VM inv eng 1 on hub 1
amdgpu 0000:08:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1
amdgpu 0000:08:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1
amdgpu 0000:08:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1
[drm] Initialized amdgpu 3.35.0 20150101 for 0000:08:00.0 on minor 0
usb 4-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-5: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB Receiver
usb 1-5: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
sd 0:0:0:0: [sda] Attached SCSI disk
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.0/0003:046D:C534.0001/input/input2
usb 4-4: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=90.01
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: USB3.0 Hub             
usb 4-4: Manufacturer: VIA Labs, Inc.         
hub 4-4:1.0: USB hub found
hub 4-4:1.0: 4 ports detected
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-5/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/input/input3
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/input/input4
usb 3-4.4: new high-speed USB device number 3 using xhci_hcd
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/input/input5
hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-5/input1
usb 1-9: new full-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3899.997 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x706eb0792cc, max_idle_ns: 881591209130 ns
clocksource: Switched to clocksource tsc
logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-5/input0
usb 3-4.4: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.01
usb 3-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4.4: Product: USB2.0 Hub             
usb 3-4.4: Manufacturer: VIA Labs, Inc.         
hub 3-4.4:1.0: USB hub found
hub 3-4.4:1.0: 4 ports detected
logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-5/input1
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: ATAPI   iHAS324   F, CL8N, max UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM            ATAPI    iHAS324   F      CL8N PQ: 0 ANSI: 5
usb 4-4.3: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1
input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input8
input: Logitech Wireless Keyboard PID:4023 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input9
input: Logitech Wireless Keyboard PID:4023 System Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input10
hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:01:00.0-5/input1:1
logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input15
hid-generic 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:01:00.0-5/input1:2
usb 4-4.3: New USB device found, idVendor=0bc2, idProduct=ab24, bcdDevice= 1.00
usb 4-4.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-4.3: Product: BUP Slim SL
usb 4-4.3: Manufacturer: Seagate
usb 4-4.3: SerialNumber: NA9T0N12
usbcore: registered new interface driver usb-storage
scsi host9: uas
usbcore: registered new interface driver uas
scsi 9:0:0:0: Direct-Access     Seagate  BUP Slim SL      0304 PQ: 0 ANSI: 6
sd 9:0:0:0: Attached scsi generic sg1 type 0
sd 9:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 9:0:0:0: [sdb] 4096-byte physical blocks
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 4f 00 00 00
sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 9:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
usb 1-9: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 9:0:0:0: [sdb] Attached SCSI disk
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg2 type 5
usb 4-4.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input19
logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:01:00.0-5/input1:1
usb 4-4.4: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=90.01
usb 4-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4.4: Product: USB3.0 Hub             
usb 4-4.4: Manufacturer: VIA Labs, Inc.         
hub 4-4.4:1.0: USB hub found
hub 4-4.4:1.0: 4 ports detected
input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-5/1-5:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input20
logitech-hidpp-device 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:01:00.0-5/input1:2
usb 3-4.4.2: new high-speed USB device number 4 using xhci_hcd
usb 3-4.4.2: New USB device found, idVendor=1bcf, idProduct=0c31, bcdDevice= 1.0f
usb 3-4.4.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 3-4.4.2: Product: USB to Serial-ATA bridge
usb 3-4.4.2: Manufacturer: Sunplus Innovation Technology.
usb 3-4.4.2: SerialNumber: FFFFFBA0FF00000000000F52FF67FF
usb-storage 3-4.4.2:1.0: USB Mass Storage device detected
scsi host10: usb-storage 3-4.4.2:1.0
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-4.4.4: new low-speed USB device number 5 using xhci_hcd
sd 4:0:0:0: [sdc] Attached SCSI disk
usb 3-4.4.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 3-4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4.4.4: Product: USB Optical Mouse
usb 3-4.4.4: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb3/3-4/3-4.4/3-4.4.4/3-4.4.4:1.0/0003:093A:2510.0005/input/input21
hid-generic 0003:093A:2510.0005: input,hidraw4: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:08:00.3-4.4.4/input0
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-8: ST500DM009-2F110A, CC43, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access     ATA      ST500DM009-2F110 CC43 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1 sdd2 sdd3 sdd4
sd 5:0:0:0: [sdd] Attached SCSI disk
scsi 10:0:0:0: Direct-Access     TOSHIBA  MQ01ABD100            PQ: 0 ANSI: 4
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 10:0:0:0: [sde] Write Protect is off
sd 10:0:0:0: [sde] Mode Sense: 38 00 00 00
sd 10:0:0:0: [sde] No Caching mode page found
sd 10:0:0:0: [sde] Assuming drive cache: write through
sd 10:0:0:0: [sde] Attached SCSI disk
raid6: avx2x4   gen() 25375 MB/s
raid6: avx2x4   xor() 14791 MB/s
raid6: avx2x2   gen() 25631 MB/s
raid6: avx2x2   xor() 16455 MB/s
raid6: avx2x1   gen() 20178 MB/s
raid6: avx2x1   xor() 15171 MB/s
raid6: sse2x4   gen() 23928 MB/s
raid6: sse2x4   xor() 13641 MB/s
raid6: sse2x2   gen() 20042 MB/s
raid6: sse2x2   xor() 14945 MB/s
raid6: sse2x1   gen()  8454 MB/s
raid6: sse2x1   xor() 10789 MB/s
raid6: using algorithm avx2x2 gen() 25631 MB/s
raid6: .... xor() 16455 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function   avx       
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device label Weekly devid 1 transid 1345 /dev/sde
BTRFS: device fsid f8ea561a-e213-41a9-b340-7f0bb7a9eb55 devid 1 transid 430 /dev/mapper/vg01-vg01--backuplocal
BTRFS: device label Daily devid 1 transid 1900 /dev/sdb
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to <linux-desktop>.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (nvme0n1p3): re-mounted. Opts: (null)
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
lp: driver loaded but no devices found
systemd[1]: Starting Create System Users...
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: plymouth-start.service: Succeeded.
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Started Journal Service.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input22
Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
Bluetooth: hci0: Device revision is 5
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:04:00.0: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:04:00.0: Found debug configuration: 0
iwlwifi 0000:04:00.0: loaded firmware version 36.77d01142.0 op_mode iwlmvm
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
MCE: In-kernel MCE decoding enabled.
iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:04:00.0: Allocated 0x00400000 bytes for firmware monitor.
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
iwlwifi 0000:04:00.0: base HW address: d8:f2:ca:de:0b:89
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
snd_hda_intel 0000:08:00.1: Handle vga_switcheroo audio client
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone0: failed to read out thermal zone (-61)
snd_hda_intel 0000:08:00.1: bound 0000:08:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:08:00.1/sound/card0/input23
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC1D0:    inputs:
snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1/input24
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1/input25
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1/input26
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1/input27
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1/input28
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[443]: Received client request to flush runtime journal.
audit: type=1400 audit(1601978327.275:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=927 comm="apparmor_parser"
audit: type=1400 audit(1601978327.279:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=929 comm="apparmor_parser"
audit: type=1400 audit(1601978327.279:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=922 comm="apparmor_parser"
audit: type=1400 audit(1601978327.279:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=930 comm="apparmor_parser"
audit: type=1400 audit(1601978327.279:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=930 comm="apparmor_parser"
audit: type=1400 audit(1601978327.279:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=923 comm="apparmor_parser"
audit: type=1400 audit(1601978327.279:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=933 comm="apparmor_parser"
audit: type=1400 audit(1601978327.279:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=925 comm="apparmor_parser"
audit: type=1400 audit(1601978327.279:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=925 comm="apparmor_parser"
audit: type=1400 audit(1601978327.279:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=925 comm="apparmor_parser"
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 3714440 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 14781 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
NET: Registered protocol family 38
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
logitech-hidpp-device 0003:046D:4023.0003: HID++ 2.0 device connected.
show_signal_msg: 16 callbacks suppressed
pipewire-media-[1567]: segfault at 7f6a8ab29420 ip 00007f6a8aafab01 sp 00007ffc8d3b0788 error 7 in libspa-alsa.so[7f6a8aaa8000+76000]
Code: 00 00 50 4c 8d 05 27 f2 02 00 48 8d 0d 48 f2 02 00 e9 63 ff ff ff 0f 1f 00 f3 0f 1e fa 8b 57 20 89 f1 39 f2 74 33 48 8b 47 58 <89> 77 20 48 85 c0 74 27 48 8b b0 50 02 00 00 48 85 f6 74 1b 4c 8b
wlp4s0: authenticate with 50:c7:bf:de:51:7b
wlp4s0: send auth to 50:c7:bf:de:51:7b (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 50:c7:bf:de:51:7b (try 1/3)
wlp4s0: RX AssocResp from 50:c7:bf:de:51:7b (capab=0x11 status=0 aid=4)
wlp4s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
BTRFS info (device sdb): force clearing of disk cache
BTRFS info (device sdb): turning on flush-on-commit
BTRFS info (device sdb): disk space caching is enabled
BTRFS info (device sdb): has skinny extents

^ permalink raw reply	[flat|nested] 6+ messages in thread