From: Keerthy <j-keerthy@ti.com> To: Viresh Kumar <viresh.kumar@linaro.org>, Simon Horman <horms@verge.net.au>, Dave Gerlach <d-gerlach@ti.com> Cc: Rafael Wysocki <rjw@rjwysocki.net>, <linux-pm@vger.kernel.org>, Vincent Guittot <vincent.guittot@linaro.org>, <geert@linux-m68k.org>, <maxime.ripard@free-electrons.com>, <wens@csie.org>, <xuwei5@hisilicon.com>, <kgene@kernel.org>, <krzk@kernel.org>, <yamada.masahiro@socionext.com>, <jun.nie@linaro.org>, <baoyou.xie@linaro.org>, <linux-kernel@vger.kernel.org> Subject: Re: [1/2] cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 Date: Mon, 11 Sep 2017 17:43:58 +0530 [thread overview] Message-ID: <9f37e244-7c6d-d556-ee7c-a5f3c9d5f756@ti.com> (raw) In-Reply-To: <20170829101146.GF3101@ubuntu> On Tuesday 29 August 2017 03:41 PM, Viresh Kumar wrote: > On 21-08-17, 15:17, Simon Horman wrote: >> Sorry, I seem to have accidently sent this email as Virish rather than >> myself. I will try again. > > No issues. I see that Rafael has already applied my patches, you can send > additional patches over that to make sure everything is clear. Viresh, I see below warning with this patch on am57xx-beagle [ 3.545247] WARNING: CPU: 1 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x58/0x78 [ 3.553099] sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt' [ 3.561126] Modules linked in: [ 3.564402] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.13.0-next-20170911-12690-ga31cc45-dirty #7 [ 3.575071] Hardware name: Generic DRA74X (Flattened Device Tree) [ 3.581484] [<c0110a88>] (unwind_backtrace) from [<c010cae4>] (show_stack+0x10/0x14) [ 3.589620] [<c010cae4>] (show_stack) from [<c0828184>] (dump_stack+0xac/0xe0) [ 3.597209] [<c0828184>] (dump_stack) from [<c01374d0>] (__warn+0xd8/0x104) [ 3.604532] [<c01374d0>] (__warn) from [<c0137530>] (warn_slowpath_fmt+0x34/0x44) [ 3.612390] [<c0137530>] (warn_slowpath_fmt) from [<c0345b30>] (sysfs_warn_dup+0x58/0x78) [ 3.620988] [<c0345b30>] (sysfs_warn_dup) from [<c0345c18>] (sysfs_create_dir_ns+0x80/0x98) [ 3.629773] [<c0345c18>] (sysfs_create_dir_ns) from [<c082c974>] (kobject_add_internal+0x9c/0x2d4) [ 3.639177] [<c082c974>] (kobject_add_internal) from [<c082cbf8>] (kobject_add+0x4c/0x9c) [ 3.647764] [<c082cbf8>] (kobject_add) from [<c05805a8>] (device_add+0xcc/0x57c) [ 3.655542] [<c05805a8>] (device_add) from [<c0584d38>] (platform_device_add+0x100/0x220) [ 3.664138] [<c0584d38>] (platform_device_add) from [<c058576c>] (platform_device_register_full+0xf4/0x118) [ 3.674378] [<c058576c>] (platform_device_register_full) from [<c0670514>] (ti_cpufreq_init+0x150/0x22c) [ 3.684326] [<c0670514>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170) [ 3.692916] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4) [ 3.702049] [<c0c00eb4>] (kernel_init_freeable) from [<c083c0cc>] (kernel_init+0x8/0x110) [ 3.710639] [<c083c0cc>] (kernel_init) from [<c0107d78>] (ret_from_fork+0x14/0x3c) [ 3.718680] ---[ end trace 33482508cbb50156 ]--- [ 3.720850] ata1: SATA link down (SStatus 0 SControl 300) [ 3.729278] ------------[ cut here ]------------ [ 3.734147] WARNING: CPU: 1 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x254/0x2d4 [ 3.742709] kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register things with the same name in the same directory. [ 3.755900] Modules linked in: [ 3.759239] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.13.0-next-20170911-12690-ga31cc45-dirty #7 [ 3.769907] Hardware name: Generic DRA74X (Flattened Device Tree) [ 3.776321] [<c0110a88>] (unwind_backtrace) from [<c010cae4>] (show_stack+0x10/0x14) [ 3.784454] [<c010cae4>] (show_stack) from [<c0828184>] (dump_stack+0xac/0xe0) [ 3.792043] [<c0828184>] (dump_stack) from [<c01374d0>] (__warn+0xd8/0x104) [ 3.799364] [<c01374d0>] (__warn) from [<c0137530>] (warn_slowpath_fmt+0x34/0x44) [ 3.807227] [<c0137530>] (warn_slowpath_fmt) from [<c082cb2c>] (kobject_add_internal+0x254/0x2d4) [ 3.816552] [<c082cb2c>] (kobject_add_internal) from [<c082cbf8>] (kobject_add+0x4c/0x9c) [ 3.825139] [<c082cbf8>] (kobject_add) from [<c05805a8>] (device_add+0xcc/0x57c) [ 3.832913] [<c05805a8>] (device_add) from [<c0584d38>] (platform_device_add+0x100/0x220) [ 3.841504] [<c0584d38>] (platform_device_add) from [<c058576c>] (platform_device_register_full+0xf4/0x118) [ 3.851729] [<c058576c>] (platform_device_register_full) from [<c0670514>] (ti_cpufreq_init+0x150/0x22c) [ 3.861686] [<c0670514>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170) [ 3.870273] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4) [ 3.879412] [<c0c00eb4>] (kernel_init_freeable) from [<c083c0cc>] (kernel_init+0x8/0x110) [ 3.888002] [<c083c0cc>] (kernel_init) from [<c0107d78>] (ret_from_fork+0x14/0x3c) [ 3.896035] ---[ end trace 33482508cbb50157 ]--- I believe in two places platform_device_register_* calls are made with the same name 'cpufreq-dt' First place is: cpufreq_dt_platdev_init and the other i believe is ti_cpufreq_init. Dave, Should the ti-cpufreq driver also be calling platform_device_register_simple? Regards, Keerthy >
WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com> To: Viresh Kumar <viresh.kumar@linaro.org>, Simon Horman <horms@verge.net.au>, Dave Gerlach <d-gerlach@ti.com> Cc: Rafael Wysocki <rjw@rjwysocki.net>, linux-pm@vger.kernel.org, Vincent Guittot <vincent.guittot@linaro.org>, geert@linux-m68k.org, maxime.ripard@free-electrons.com, wens@csie.org, xuwei5@hisilicon.com, kgene@kernel.org, krzk@kernel.org, yamada.masahiro@socionext.com, jun.nie@linaro.org, baoyou.xie@linaro.org, linux-kernel@vger.kernel.org Subject: Re: [1/2] cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 Date: Mon, 11 Sep 2017 17:43:58 +0530 [thread overview] Message-ID: <9f37e244-7c6d-d556-ee7c-a5f3c9d5f756@ti.com> (raw) In-Reply-To: <20170829101146.GF3101@ubuntu> On Tuesday 29 August 2017 03:41 PM, Viresh Kumar wrote: > On 21-08-17, 15:17, Simon Horman wrote: >> Sorry, I seem to have accidently sent this email as Virish rather than >> myself. I will try again. > > No issues. I see that Rafael has already applied my patches, you can send > additional patches over that to make sure everything is clear. Viresh, I see below warning with this patch on am57xx-beagle [ 3.545247] WARNING: CPU: 1 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x58/0x78 [ 3.553099] sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt' [ 3.561126] Modules linked in: [ 3.564402] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.13.0-next-20170911-12690-ga31cc45-dirty #7 [ 3.575071] Hardware name: Generic DRA74X (Flattened Device Tree) [ 3.581484] [<c0110a88>] (unwind_backtrace) from [<c010cae4>] (show_stack+0x10/0x14) [ 3.589620] [<c010cae4>] (show_stack) from [<c0828184>] (dump_stack+0xac/0xe0) [ 3.597209] [<c0828184>] (dump_stack) from [<c01374d0>] (__warn+0xd8/0x104) [ 3.604532] [<c01374d0>] (__warn) from [<c0137530>] (warn_slowpath_fmt+0x34/0x44) [ 3.612390] [<c0137530>] (warn_slowpath_fmt) from [<c0345b30>] (sysfs_warn_dup+0x58/0x78) [ 3.620988] [<c0345b30>] (sysfs_warn_dup) from [<c0345c18>] (sysfs_create_dir_ns+0x80/0x98) [ 3.629773] [<c0345c18>] (sysfs_create_dir_ns) from [<c082c974>] (kobject_add_internal+0x9c/0x2d4) [ 3.639177] [<c082c974>] (kobject_add_internal) from [<c082cbf8>] (kobject_add+0x4c/0x9c) [ 3.647764] [<c082cbf8>] (kobject_add) from [<c05805a8>] (device_add+0xcc/0x57c) [ 3.655542] [<c05805a8>] (device_add) from [<c0584d38>] (platform_device_add+0x100/0x220) [ 3.664138] [<c0584d38>] (platform_device_add) from [<c058576c>] (platform_device_register_full+0xf4/0x118) [ 3.674378] [<c058576c>] (platform_device_register_full) from [<c0670514>] (ti_cpufreq_init+0x150/0x22c) [ 3.684326] [<c0670514>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170) [ 3.692916] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4) [ 3.702049] [<c0c00eb4>] (kernel_init_freeable) from [<c083c0cc>] (kernel_init+0x8/0x110) [ 3.710639] [<c083c0cc>] (kernel_init) from [<c0107d78>] (ret_from_fork+0x14/0x3c) [ 3.718680] ---[ end trace 33482508cbb50156 ]--- [ 3.720850] ata1: SATA link down (SStatus 0 SControl 300) [ 3.729278] ------------[ cut here ]------------ [ 3.734147] WARNING: CPU: 1 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x254/0x2d4 [ 3.742709] kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register things with the same name in the same directory. [ 3.755900] Modules linked in: [ 3.759239] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.13.0-next-20170911-12690-ga31cc45-dirty #7 [ 3.769907] Hardware name: Generic DRA74X (Flattened Device Tree) [ 3.776321] [<c0110a88>] (unwind_backtrace) from [<c010cae4>] (show_stack+0x10/0x14) [ 3.784454] [<c010cae4>] (show_stack) from [<c0828184>] (dump_stack+0xac/0xe0) [ 3.792043] [<c0828184>] (dump_stack) from [<c01374d0>] (__warn+0xd8/0x104) [ 3.799364] [<c01374d0>] (__warn) from [<c0137530>] (warn_slowpath_fmt+0x34/0x44) [ 3.807227] [<c0137530>] (warn_slowpath_fmt) from [<c082cb2c>] (kobject_add_internal+0x254/0x2d4) [ 3.816552] [<c082cb2c>] (kobject_add_internal) from [<c082cbf8>] (kobject_add+0x4c/0x9c) [ 3.825139] [<c082cbf8>] (kobject_add) from [<c05805a8>] (device_add+0xcc/0x57c) [ 3.832913] [<c05805a8>] (device_add) from [<c0584d38>] (platform_device_add+0x100/0x220) [ 3.841504] [<c0584d38>] (platform_device_add) from [<c058576c>] (platform_device_register_full+0xf4/0x118) [ 3.851729] [<c058576c>] (platform_device_register_full) from [<c0670514>] (ti_cpufreq_init+0x150/0x22c) [ 3.861686] [<c0670514>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170) [ 3.870273] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4) [ 3.879412] [<c0c00eb4>] (kernel_init_freeable) from [<c083c0cc>] (kernel_init+0x8/0x110) [ 3.888002] [<c083c0cc>] (kernel_init) from [<c0107d78>] (ret_from_fork+0x14/0x3c) [ 3.896035] ---[ end trace 33482508cbb50157 ]--- I believe in two places platform_device_register_* calls are made with the same name 'cpufreq-dt' First place is: cpufreq_dt_platdev_init and the other i believe is ti_cpufreq_init. Dave, Should the ti-cpufreq driver also be calling platform_device_register_simple? Regards, Keerthy >
next prev parent reply other threads:[~2017-09-11 12:14 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-08-21 13:13 [1/2] cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 Viresh Kumar 2017-08-21 13:17 ` Simon Horman 2017-08-29 10:11 ` Viresh Kumar 2017-09-11 12:13 ` Keerthy [this message] 2017-09-11 12:13 ` Keerthy 2017-09-11 14:18 ` Dave Gerlach 2017-09-11 14:18 ` Dave Gerlach 2017-09-19 18:46 ` Viresh Kumar -- strict thread matches above, loose matches on Subject: below -- 2017-08-16 5:37 [PATCH 1/2] " Viresh Kumar 2017-08-21 13:17 ` [1/2] " Simon Horman 2017-08-23 3:48 ` Masahiro Yamada
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=9f37e244-7c6d-d556-ee7c-a5f3c9d5f756@ti.com \ --to=j-keerthy@ti.com \ --cc=baoyou.xie@linaro.org \ --cc=d-gerlach@ti.com \ --cc=geert@linux-m68k.org \ --cc=horms@verge.net.au \ --cc=jun.nie@linaro.org \ --cc=kgene@kernel.org \ --cc=krzk@kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=maxime.ripard@free-electrons.com \ --cc=rjw@rjwysocki.net \ --cc=vincent.guittot@linaro.org \ --cc=viresh.kumar@linaro.org \ --cc=wens@csie.org \ --cc=xuwei5@hisilicon.com \ --cc=yamada.masahiro@socionext.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.