* [U-Boot] [PATCH] mmc: zynq_sdhci: improve debug print @ 2017-04-03 1:42 ` Jean-Francois Dagenais 2017-04-14 6:29 ` Jaehoon Chung 0 siblings, 1 reply; 3+ messages in thread From: Jean-Francois Dagenais @ 2017-04-03 1:42 UTC (permalink / raw) To: u-boot When debugging dual SDHCI controller setup, printing strings and bank info is very helpful. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> --- drivers/mmc/zynq_sdhci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 089a424..f975165 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -160,8 +160,8 @@ static void arasan_sdhci_set_tapdelay(struct sdhci_host *host) else return; - debug("%s, %d:%d, mode:%d\n", __func__, priv->deviceid, priv->bank, - uhsmode); + debug("%s, host:%s devId:%d, bank:%d, mode:%d\n", __func__, host->name, + priv->deviceid, priv->bank, uhsmode); if ((uhsmode >= MMC_TIMING_UHS_SDR25) && (uhsmode <= MMC_TIMING_HS200)) arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode, -- 2.1.4 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] mmc: zynq_sdhci: improve debug print 2017-04-03 1:42 ` [U-Boot] [PATCH] mmc: zynq_sdhci: improve debug print Jean-Francois Dagenais @ 2017-04-14 6:29 ` Jaehoon Chung 2017-04-14 6:32 ` Jaehoon Chung 0 siblings, 1 reply; 3+ messages in thread From: Jaehoon Chung @ 2017-04-14 6:29 UTC (permalink / raw) To: u-boot On 04/03/2017 10:42 AM, Jean-Francois Dagenais wrote: > When debugging dual SDHCI controller setup, printing strings and bank info > is very helpful. > > Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> This was delegated to Michal, but it's related to mmc side. So i will change to delegate to me..and applied to u-boot-mmc. Thanks! Best Regards, Jaehoon Chung > --- > drivers/mmc/zynq_sdhci.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c > index 089a424..f975165 100644 > --- a/drivers/mmc/zynq_sdhci.c > +++ b/drivers/mmc/zynq_sdhci.c > @@ -160,8 +160,8 @@ static void arasan_sdhci_set_tapdelay(struct sdhci_host *host) > else > return; > > - debug("%s, %d:%d, mode:%d\n", __func__, priv->deviceid, priv->bank, > - uhsmode); > + debug("%s, host:%s devId:%d, bank:%d, mode:%d\n", __func__, host->name, > + priv->deviceid, priv->bank, uhsmode); > if ((uhsmode >= MMC_TIMING_UHS_SDR25) && > (uhsmode <= MMC_TIMING_HS200)) > arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode, > ^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] mmc: zynq_sdhci: improve debug print 2017-04-14 6:29 ` Jaehoon Chung @ 2017-04-14 6:32 ` Jaehoon Chung 0 siblings, 0 replies; 3+ messages in thread From: Jaehoon Chung @ 2017-04-14 6:32 UTC (permalink / raw) To: u-boot On 04/14/2017 03:29 PM, Jaehoon Chung wrote: > On 04/03/2017 10:42 AM, Jean-Francois Dagenais wrote: >> When debugging dual SDHCI controller setup, printing strings and bank info >> is very helpful. >> >> Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> > > This was delegated to Michal, but it's related to mmc side. > So i will change to delegate to me..and applied to u-boot-mmc. Thanks! Sorry. i can't apply this patch..Could you check this? Best Regards, Jaehoon Chung > > Best Regards, > Jaehoon Chung > >> --- >> drivers/mmc/zynq_sdhci.c | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c >> index 089a424..f975165 100644 >> --- a/drivers/mmc/zynq_sdhci.c >> +++ b/drivers/mmc/zynq_sdhci.c >> @@ -160,8 +160,8 @@ static void arasan_sdhci_set_tapdelay(struct sdhci_host *host) >> else >> return; >> >> - debug("%s, %d:%d, mode:%d\n", __func__, priv->deviceid, priv->bank, >> - uhsmode); >> + debug("%s, host:%s devId:%d, bank:%d, mode:%d\n", __func__, host->name, >> + priv->deviceid, priv->bank, uhsmode); >> if ((uhsmode >= MMC_TIMING_UHS_SDR25) && >> (uhsmode <= MMC_TIMING_HS200)) >> arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode, >> > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot > ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-04-14 6:32 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <CGME20170403014243epcas2p140cc1903315925efb9e583efa3c474d2@epcas2p1.samsung.com> 2017-04-03 1:42 ` [U-Boot] [PATCH] mmc: zynq_sdhci: improve debug print Jean-Francois Dagenais 2017-04-14 6:29 ` Jaehoon Chung 2017-04-14 6:32 ` Jaehoon Chung
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.