* [PATCH] drm/radeon/dpm: add debugfs support for RS780/RS880 (v2)
@ 2013-07-17 20:42 Anthoine Bourgeois
2013-07-17 20:54 ` Deucher, Alexander
0 siblings, 1 reply; 5+ messages in thread
From: Anthoine Bourgeois @ 2013-07-17 20:42 UTC (permalink / raw)
To: Alex Deucher, Christian König, Jerome Glisse, Anthoine Bourgeois
Cc: dri-devel
This allows you to look at the current DPM state via
debugfs.
Due to the way the hardware works on these asics, there's
no way to look up exactly what power state we are in, so
we make the best guess we can based on the current sclk.
v2: fix sclk equation
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
---
drivers/gpu/drm/radeon/radeon_asic.c | 1 +
drivers/gpu/drm/radeon/radeon_asic.h | 2 ++
drivers/gpu/drm/radeon/rs780_dpm.c | 23 +++++++++++++++++++++++
drivers/gpu/drm/radeon/rs780d.h | 3 +++
4 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index fea997e..78bec1a 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -1270,6 +1270,7 @@ static struct radeon_asic rs780_asic = {
.get_sclk = &rs780_dpm_get_sclk,
.get_mclk = &rs780_dpm_get_mclk,
.print_power_state = &rs780_dpm_print_power_state,
+ .debugfs_print_current_performance_level = &rs780_dpm_debugfs_print_current_performance_level,
},
.pflip = {
.pre_page_flip = &rs600_pre_page_flip,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index b04b578..ca18957 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -433,6 +433,8 @@ u32 rs780_dpm_get_sclk(struct radeon_device *rdev, bool low);
u32 rs780_dpm_get_mclk(struct radeon_device *rdev, bool low);
void rs780_dpm_print_power_state(struct radeon_device *rdev,
struct radeon_ps *ps);
+void rs780_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
+ struct seq_file *m);
/* uvd */
int r600_uvd_init(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/rs780_dpm.c b/drivers/gpu/drm/radeon/rs780_dpm.c
index bef832a..7f128c2 100644
--- a/drivers/gpu/drm/radeon/rs780_dpm.c
+++ b/drivers/gpu/drm/radeon/rs780_dpm.c
@@ -28,6 +28,7 @@
#include "r600_dpm.h"
#include "rs780_dpm.h"
#include "atom.h"
+#include <linux/seq_file.h>
static struct igp_ps *rs780_get_ps(struct radeon_ps *rps)
{
@@ -961,3 +962,25 @@ u32 rs780_dpm_get_mclk(struct radeon_device *rdev, bool low)
return pi->bootup_uma_clk;
}
+
+void rs780_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
+ struct seq_file *m)
+{
+ struct radeon_ps *rps = rdev->pm.dpm.current_ps;
+ struct igp_ps *ps = rs780_get_ps(rps);
+ u32 current_fb_div = RREG32(FVTHROT_STATUS_REG0) & CURRENT_FEEDBACK_DIV_MASK;
+ u32 func_cntl = RREG32(CG_SPLL_FUNC_CNTL);
+ u32 post_div = ((func_cntl & SPLL_SW_HILEN_MASK) >> SPLL_SW_HILEN_SHIFT) + 1 +
+ ((func_cntl & SPLL_SW_LOLEN_MASK) >> SPLL_SW_LOLEN_SHIFT) + 1;
+ u32 sclk = (rdev->clock.spll.reference_freq * current_fb_div) / post_div;
+
+ seq_printf(m, "uvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
+
+ /* guess based on the current sclk */
+ if (sclk < (ps->sclk_low + 500))
+ seq_printf(m, "power level 0 sclk: %u vddc_index: %d\n",
+ ps->sclk_low, ps->min_voltage);
+ else
+ seq_printf(m, "power level 1 sclk: %u vddc_index: %d\n",
+ ps->sclk_high, ps->max_voltage);
+}
diff --git a/drivers/gpu/drm/radeon/rs780d.h b/drivers/gpu/drm/radeon/rs780d.h
index b1142ed..cfbe9a4 100644
--- a/drivers/gpu/drm/radeon/rs780d.h
+++ b/drivers/gpu/drm/radeon/rs780d.h
@@ -28,6 +28,7 @@
# define SPLL_SLEEP (1 << 1)
# define SPLL_REF_DIV(x) ((x) << 2)
# define SPLL_REF_DIV_MASK (7 << 2)
+# define SPLL_REF_DIV_SHIFT 2
# define SPLL_FB_DIV(x) ((x) << 5)
# define SPLL_FB_DIV_MASK (0xff << 2)
# define SPLL_FB_DIV_SHIFT 2
@@ -36,8 +37,10 @@
# define SPLL_PULSENUM_MASK (3 << 14)
# define SPLL_SW_HILEN(x) ((x) << 16)
# define SPLL_SW_HILEN_MASK (0xf << 16)
+# define SPLL_SW_HILEN_SHIFT 16
# define SPLL_SW_LOLEN(x) ((x) << 20)
# define SPLL_SW_LOLEN_MASK (0xf << 20)
+# define SPLL_SW_LOLEN_SHIFT 20
# define SPLL_DIVEN (1 << 24)
# define SPLL_BYPASS_EN (1 << 25)
# define SPLL_CHG_STATUS (1 << 29)
--
1.8.1.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* RE: [PATCH] drm/radeon/dpm: add debugfs support for RS780/RS880 (v2)
2013-07-17 20:42 [PATCH] drm/radeon/dpm: add debugfs support for RS780/RS880 (v2) Anthoine Bourgeois
@ 2013-07-17 20:54 ` Deucher, Alexander
2013-07-17 21:23 ` Anthoine Bourgeois
0 siblings, 1 reply; 5+ messages in thread
From: Deucher, Alexander @ 2013-07-17 20:54 UTC (permalink / raw)
To: Anthoine Bourgeois, Koenig, Christian, Jerome Glisse; +Cc: dri-devel
[-- Attachment #1: Type: text/plain, Size: 5383 bytes --]
Good catch, I screwed up the ref divider calculation. How about the attached patch?
Alex
> -----Original Message-----
> From: Anthoine Bourgeois [mailto:anthoine.bourgeois@gmail.com]
> Sent: Wednesday, July 17, 2013 4:43 PM
> To: Deucher, Alexander; Koenig, Christian; Jerome Glisse; Anthoine
> Bourgeois
> Cc: dri-devel@lists.freedesktop.org
> Subject: [PATCH] drm/radeon/dpm: add debugfs support for RS780/RS880
> (v2)
>
> This allows you to look at the current DPM state via
> debugfs.
>
> Due to the way the hardware works on these asics, there's
> no way to look up exactly what power state we are in, so
> we make the best guess we can based on the current sclk.
>
> v2: fix sclk equation
>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
> ---
> drivers/gpu/drm/radeon/radeon_asic.c | 1 +
> drivers/gpu/drm/radeon/radeon_asic.h | 2 ++
> drivers/gpu/drm/radeon/rs780_dpm.c | 23 +++++++++++++++++++++++
> drivers/gpu/drm/radeon/rs780d.h | 3 +++
> 4 files changed, 29 insertions(+)
>
> diff --git a/drivers/gpu/drm/radeon/radeon_asic.c
> b/drivers/gpu/drm/radeon/radeon_asic.c
> index fea997e..78bec1a 100644
> --- a/drivers/gpu/drm/radeon/radeon_asic.c
> +++ b/drivers/gpu/drm/radeon/radeon_asic.c
> @@ -1270,6 +1270,7 @@ static struct radeon_asic rs780_asic = {
> .get_sclk = &rs780_dpm_get_sclk,
> .get_mclk = &rs780_dpm_get_mclk,
> .print_power_state = &rs780_dpm_print_power_state,
> + .debugfs_print_current_performance_level =
> &rs780_dpm_debugfs_print_current_performance_level,
> },
> .pflip = {
> .pre_page_flip = &rs600_pre_page_flip,
> diff --git a/drivers/gpu/drm/radeon/radeon_asic.h
> b/drivers/gpu/drm/radeon/radeon_asic.h
> index b04b578..ca18957 100644
> --- a/drivers/gpu/drm/radeon/radeon_asic.h
> +++ b/drivers/gpu/drm/radeon/radeon_asic.h
> @@ -433,6 +433,8 @@ u32 rs780_dpm_get_sclk(struct radeon_device *rdev,
> bool low);
> u32 rs780_dpm_get_mclk(struct radeon_device *rdev, bool low);
> void rs780_dpm_print_power_state(struct radeon_device *rdev,
> struct radeon_ps *ps);
> +void rs780_dpm_debugfs_print_current_performance_level(struct
> radeon_device *rdev,
> + struct seq_file *m);
>
> /* uvd */
> int r600_uvd_init(struct radeon_device *rdev);
> diff --git a/drivers/gpu/drm/radeon/rs780_dpm.c
> b/drivers/gpu/drm/radeon/rs780_dpm.c
> index bef832a..7f128c2 100644
> --- a/drivers/gpu/drm/radeon/rs780_dpm.c
> +++ b/drivers/gpu/drm/radeon/rs780_dpm.c
> @@ -28,6 +28,7 @@
> #include "r600_dpm.h"
> #include "rs780_dpm.h"
> #include "atom.h"
> +#include <linux/seq_file.h>
>
> static struct igp_ps *rs780_get_ps(struct radeon_ps *rps)
> {
> @@ -961,3 +962,25 @@ u32 rs780_dpm_get_mclk(struct radeon_device
> *rdev, bool low)
>
> return pi->bootup_uma_clk;
> }
> +
> +void rs780_dpm_debugfs_print_current_performance_level(struct
> radeon_device *rdev,
> + struct seq_file *m)
> +{
> + struct radeon_ps *rps = rdev->pm.dpm.current_ps;
> + struct igp_ps *ps = rs780_get_ps(rps);
> + u32 current_fb_div = RREG32(FVTHROT_STATUS_REG0) &
> CURRENT_FEEDBACK_DIV_MASK;
> + u32 func_cntl = RREG32(CG_SPLL_FUNC_CNTL);
> + u32 post_div = ((func_cntl & SPLL_SW_HILEN_MASK) >>
> SPLL_SW_HILEN_SHIFT) + 1 +
> + ((func_cntl & SPLL_SW_LOLEN_MASK) >>
> SPLL_SW_LOLEN_SHIFT) + 1;
> + u32 sclk = (rdev->clock.spll.reference_freq * current_fb_div) /
> post_div;
> +
> + seq_printf(m, "uvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
> +
> + /* guess based on the current sclk */
> + if (sclk < (ps->sclk_low + 500))
> + seq_printf(m, "power level 0 sclk: %u vddc_index: %d\n",
> + ps->sclk_low, ps->min_voltage);
> + else
> + seq_printf(m, "power level 1 sclk: %u vddc_index: %d\n",
> + ps->sclk_high, ps->max_voltage);
> +}
> diff --git a/drivers/gpu/drm/radeon/rs780d.h
> b/drivers/gpu/drm/radeon/rs780d.h
> index b1142ed..cfbe9a4 100644
> --- a/drivers/gpu/drm/radeon/rs780d.h
> +++ b/drivers/gpu/drm/radeon/rs780d.h
> @@ -28,6 +28,7 @@
> # define SPLL_SLEEP (1 << 1)
> # define SPLL_REF_DIV(x) ((x) << 2)
> # define SPLL_REF_DIV_MASK (7 << 2)
> +# define SPLL_REF_DIV_SHIFT 2
> # define SPLL_FB_DIV(x) ((x) << 5)
> # define SPLL_FB_DIV_MASK (0xff << 2)
> # define SPLL_FB_DIV_SHIFT 2
> @@ -36,8 +37,10 @@
> # define SPLL_PULSENUM_MASK (3 << 14)
> # define SPLL_SW_HILEN(x) ((x) << 16)
> # define SPLL_SW_HILEN_MASK (0xf << 16)
> +# define SPLL_SW_HILEN_SHIFT 16
> # define SPLL_SW_LOLEN(x) ((x) << 20)
> # define SPLL_SW_LOLEN_MASK (0xf << 20)
> +# define SPLL_SW_LOLEN_SHIFT 20
> # define SPLL_DIVEN (1 << 24)
> # define SPLL_BYPASS_EN (1 << 25)
> # define SPLL_CHG_STATUS (1 << 29)
> --
> 1.8.1.5
>
[-- Attachment #2: 0001-drm-radeon-dpm-add-debugfs-support-for-RS780-RS880-v.patch --]
[-- Type: application/octet-stream, Size: 4885 bytes --]
From 444bddc4b9b3313a562cd3ba40f780fb82570f7d Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Tue, 2 Jul 2013 13:05:23 -0400
Subject: [PATCH] drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
This allows you to look at the current DPM state via
debugfs.
Due to the way the hardware works on these asics, there's
no way to look up exactly what power state we are in, so
we make the best guess we can based on the current sclk.
v2: Anthoine's version
v3: fix ref div
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
drivers/gpu/drm/radeon/radeon_asic.c | 1 +
drivers/gpu/drm/radeon/radeon_asic.h | 2 ++
drivers/gpu/drm/radeon/rs780_dpm.c | 25 +++++++++++++++++++++++++
drivers/gpu/drm/radeon/rs780d.h | 3 +++
4 files changed, 31 insertions(+), 0 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index fea997e..78bec1a 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -1270,6 +1270,7 @@ static struct radeon_asic rs780_asic = {
.get_sclk = &rs780_dpm_get_sclk,
.get_mclk = &rs780_dpm_get_mclk,
.print_power_state = &rs780_dpm_print_power_state,
+ .debugfs_print_current_performance_level = &rs780_dpm_debugfs_print_current_performance_level,
},
.pflip = {
.pre_page_flip = &rs600_pre_page_flip,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index b04b578..ca18957 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -433,6 +433,8 @@ u32 rs780_dpm_get_sclk(struct radeon_device *rdev, bool low);
u32 rs780_dpm_get_mclk(struct radeon_device *rdev, bool low);
void rs780_dpm_print_power_state(struct radeon_device *rdev,
struct radeon_ps *ps);
+void rs780_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
+ struct seq_file *m);
/* uvd */
int r600_uvd_init(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/rs780_dpm.c b/drivers/gpu/drm/radeon/rs780_dpm.c
index bef832a..d1a1ce7 100644
--- a/drivers/gpu/drm/radeon/rs780_dpm.c
+++ b/drivers/gpu/drm/radeon/rs780_dpm.c
@@ -28,6 +28,7 @@
#include "r600_dpm.h"
#include "rs780_dpm.h"
#include "atom.h"
+#include <linux/seq_file.h>
static struct igp_ps *rs780_get_ps(struct radeon_ps *rps)
{
@@ -961,3 +962,27 @@ u32 rs780_dpm_get_mclk(struct radeon_device *rdev, bool low)
return pi->bootup_uma_clk;
}
+
+void rs780_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
+ struct seq_file *m)
+{
+ struct radeon_ps *rps = rdev->pm.dpm.current_ps;
+ struct igp_ps *ps = rs780_get_ps(rps);
+ u32 current_fb_div = RREG32(FVTHROT_STATUS_REG0) & CURRENT_FEEDBACK_DIV_MASK;
+ u32 func_cntl = RREG32(CG_SPLL_FUNC_CNTL);
+ u32 ref_div = ((func_cntl & SPLL_REF_DIV_MASK) >> SPLL_REF_DIV_SHIFT) + 1;
+ u32 post_div = ((func_cntl & SPLL_SW_HILEN_MASK) >> SPLL_SW_HILEN_SHIFT) + 1 +
+ ((func_cntl & SPLL_SW_LOLEN_MASK) >> SPLL_SW_LOLEN_SHIFT) + 1;
+ u32 sclk = (rdev->clock.spll.reference_freq * current_fb_div) /
+ (post_div * ref_div);
+
+ seq_printf(m, "uvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
+
+ /* guess based on the current sclk */
+ if (sclk < (ps->sclk_low + 500))
+ seq_printf(m, "power level 0 sclk: %u vddc_index: %d\n",
+ ps->sclk_low, ps->min_voltage);
+ else
+ seq_printf(m, "power level 1 sclk: %u vddc_index: %d\n",
+ ps->sclk_high, ps->max_voltage);
+}
diff --git a/drivers/gpu/drm/radeon/rs780d.h b/drivers/gpu/drm/radeon/rs780d.h
index b1142ed..cfbe9a4 100644
--- a/drivers/gpu/drm/radeon/rs780d.h
+++ b/drivers/gpu/drm/radeon/rs780d.h
@@ -28,6 +28,7 @@
# define SPLL_SLEEP (1 << 1)
# define SPLL_REF_DIV(x) ((x) << 2)
# define SPLL_REF_DIV_MASK (7 << 2)
+# define SPLL_REF_DIV_SHIFT 2
# define SPLL_FB_DIV(x) ((x) << 5)
# define SPLL_FB_DIV_MASK (0xff << 2)
# define SPLL_FB_DIV_SHIFT 2
@@ -36,8 +37,10 @@
# define SPLL_PULSENUM_MASK (3 << 14)
# define SPLL_SW_HILEN(x) ((x) << 16)
# define SPLL_SW_HILEN_MASK (0xf << 16)
+# define SPLL_SW_HILEN_SHIFT 16
# define SPLL_SW_LOLEN(x) ((x) << 20)
# define SPLL_SW_LOLEN_MASK (0xf << 20)
+# define SPLL_SW_LOLEN_SHIFT 20
# define SPLL_DIVEN (1 << 24)
# define SPLL_BYPASS_EN (1 << 25)
# define SPLL_CHG_STATUS (1 << 29)
--
1.7.7.5
[-- Attachment #3: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] drm/radeon/dpm: add debugfs support for RS780/RS880 (v2)
2013-07-17 20:54 ` Deucher, Alexander
@ 2013-07-17 21:23 ` Anthoine Bourgeois
2013-07-17 21:44 ` Deucher, Alexander
0 siblings, 1 reply; 5+ messages in thread
From: Anthoine Bourgeois @ 2013-07-17 21:23 UTC (permalink / raw)
To: Deucher, Alexander, Koenig, Christian, Jerome Glisse; +Cc: dri-devel
On Wed, Jul 17, 2013 at 08:54:33PM +0000, Deucher, Alexander wrote:
>Good catch, I screwed up the ref divider calculation. How about the attached patch?
It works too. But here was my logic, tell me if I'm wrong:
The output frequency of the PLL is equal to the VCO frequency (FVCO)
divided by the post-scale counter (C).
Fout = FVCO / C
And VCO frequency is equal to feedback (M) times the reference frequency
(FREF).
FVCO = FREF x M
Where reference clock (FREF) is equal to the input clock (Fin) divided
by the pre-scale counter (N)
FREF = Fin / N
then
FVCO = Fin x M / N
and
Fout = (Fin x M) / (N x C) = FREF x M / C
where:
FVCO = VCO frequency
Fin = input frequency
Fout = output frequency
FREF = reference frequency (rdev->clock.spll.reference_freq in the code)
M = counter (multiplier), part of the clock feedback path (current_fb_div)
N = counter (divider), part of the clock reference path (ref_div)
C = post-scale counter (divider) (post_div)
No need to ref_div. Or reference_freq == Fin and the varname confuses me ?
In my test:
# cat /sys/kernel/debug/dri/0/radeon_pm_info
uvd vclk: 0 dclk: 0
power level 0 sclk: 20000 vddc_index: 2
when my system is idle and sclk == 19690 and:
# cat /sys/kernel/debug/dri/0/radeon_pm_info
uvd vclk: 0 dclk: 0
power level 1 sclk: 50000 vddc_index: 2
when I play supertuxkart with sclk == 49762.
Thanks for yesturday, I was in a wrong way,
Anthoine
>
>Alex
>
>> -----Original Message-----
>> From: Anthoine Bourgeois [mailto:anthoine.bourgeois@gmail.com]
>> Sent: Wednesday, July 17, 2013 4:43 PM
>> To: Deucher, Alexander; Koenig, Christian; Jerome Glisse; Anthoine
>> Bourgeois
>> Cc: dri-devel@lists.freedesktop.org
>> Subject: [PATCH] drm/radeon/dpm: add debugfs support for RS780/RS880
>> (v2)
>>
>> This allows you to look at the current DPM state via
>> debugfs.
>>
>> Due to the way the hardware works on these asics, there's
>> no way to look up exactly what power state we are in, so
>> we make the best guess we can based on the current sclk.
>>
>> v2: fix sclk equation
>>
>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
>> ---
>> drivers/gpu/drm/radeon/radeon_asic.c | 1 +
>> drivers/gpu/drm/radeon/radeon_asic.h | 2 ++
>> drivers/gpu/drm/radeon/rs780_dpm.c | 23 +++++++++++++++++++++++
>> drivers/gpu/drm/radeon/rs780d.h | 3 +++
>> 4 files changed, 29 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/radeon/radeon_asic.c
>> b/drivers/gpu/drm/radeon/radeon_asic.c
>> index fea997e..78bec1a 100644
>> --- a/drivers/gpu/drm/radeon/radeon_asic.c
>> +++ b/drivers/gpu/drm/radeon/radeon_asic.c
>> @@ -1270,6 +1270,7 @@ static struct radeon_asic rs780_asic = {
>> .get_sclk = &rs780_dpm_get_sclk,
>> .get_mclk = &rs780_dpm_get_mclk,
>> .print_power_state = &rs780_dpm_print_power_state,
>> + .debugfs_print_current_performance_level =
>> &rs780_dpm_debugfs_print_current_performance_level,
>> },
>> .pflip = {
>> .pre_page_flip = &rs600_pre_page_flip,
>> diff --git a/drivers/gpu/drm/radeon/radeon_asic.h
>> b/drivers/gpu/drm/radeon/radeon_asic.h
>> index b04b578..ca18957 100644
>> --- a/drivers/gpu/drm/radeon/radeon_asic.h
>> +++ b/drivers/gpu/drm/radeon/radeon_asic.h
>> @@ -433,6 +433,8 @@ u32 rs780_dpm_get_sclk(struct radeon_device *rdev,
>> bool low);
>> u32 rs780_dpm_get_mclk(struct radeon_device *rdev, bool low);
>> void rs780_dpm_print_power_state(struct radeon_device *rdev,
>> struct radeon_ps *ps);
>> +void rs780_dpm_debugfs_print_current_performance_level(struct
>> radeon_device *rdev,
>> + struct seq_file *m);
>>
>> /* uvd */
>> int r600_uvd_init(struct radeon_device *rdev);
>> diff --git a/drivers/gpu/drm/radeon/rs780_dpm.c
>> b/drivers/gpu/drm/radeon/rs780_dpm.c
>> index bef832a..7f128c2 100644
>> --- a/drivers/gpu/drm/radeon/rs780_dpm.c
>> +++ b/drivers/gpu/drm/radeon/rs780_dpm.c
>> @@ -28,6 +28,7 @@
>> #include "r600_dpm.h"
>> #include "rs780_dpm.h"
>> #include "atom.h"
>> +#include <linux/seq_file.h>
>>
>> static struct igp_ps *rs780_get_ps(struct radeon_ps *rps)
>> {
>> @@ -961,3 +962,25 @@ u32 rs780_dpm_get_mclk(struct radeon_device
>> *rdev, bool low)
>>
>> return pi->bootup_uma_clk;
>> }
>> +
>> +void rs780_dpm_debugfs_print_current_performance_level(struct
>> radeon_device *rdev,
>> + struct seq_file *m)
>> +{
>> + struct radeon_ps *rps = rdev->pm.dpm.current_ps;
>> + struct igp_ps *ps = rs780_get_ps(rps);
>> + u32 current_fb_div = RREG32(FVTHROT_STATUS_REG0) &
>> CURRENT_FEEDBACK_DIV_MASK;
>> + u32 func_cntl = RREG32(CG_SPLL_FUNC_CNTL);
>> + u32 post_div = ((func_cntl & SPLL_SW_HILEN_MASK) >>
>> SPLL_SW_HILEN_SHIFT) + 1 +
>> + ((func_cntl & SPLL_SW_LOLEN_MASK) >>
>> SPLL_SW_LOLEN_SHIFT) + 1;
>> + u32 sclk = (rdev->clock.spll.reference_freq * current_fb_div) /
>> post_div;
>> +
>> + seq_printf(m, "uvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
>> +
>> + /* guess based on the current sclk */
>> + if (sclk < (ps->sclk_low + 500))
>> + seq_printf(m, "power level 0 sclk: %u vddc_index: %d\n",
>> + ps->sclk_low, ps->min_voltage);
>> + else
>> + seq_printf(m, "power level 1 sclk: %u vddc_index: %d\n",
>> + ps->sclk_high, ps->max_voltage);
>> +}
>> diff --git a/drivers/gpu/drm/radeon/rs780d.h
>> b/drivers/gpu/drm/radeon/rs780d.h
>> index b1142ed..cfbe9a4 100644
>> --- a/drivers/gpu/drm/radeon/rs780d.h
>> +++ b/drivers/gpu/drm/radeon/rs780d.h
>> @@ -28,6 +28,7 @@
>> # define SPLL_SLEEP (1 << 1)
>> # define SPLL_REF_DIV(x) ((x) << 2)
>> # define SPLL_REF_DIV_MASK (7 << 2)
>> +# define SPLL_REF_DIV_SHIFT 2
>> # define SPLL_FB_DIV(x) ((x) << 5)
>> # define SPLL_FB_DIV_MASK (0xff << 2)
>> # define SPLL_FB_DIV_SHIFT 2
>> @@ -36,8 +37,10 @@
>> # define SPLL_PULSENUM_MASK (3 << 14)
>> # define SPLL_SW_HILEN(x) ((x) << 16)
>> # define SPLL_SW_HILEN_MASK (0xf << 16)
>> +# define SPLL_SW_HILEN_SHIFT 16
>> # define SPLL_SW_LOLEN(x) ((x) << 20)
>> # define SPLL_SW_LOLEN_MASK (0xf << 20)
>> +# define SPLL_SW_LOLEN_SHIFT 20
>> # define SPLL_DIVEN (1 << 24)
>> # define SPLL_BYPASS_EN (1 << 25)
>> # define SPLL_CHG_STATUS (1 << 29)
>> --
>> 1.8.1.5
>>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [PATCH] drm/radeon/dpm: add debugfs support for RS780/RS880 (v2)
2013-07-17 21:23 ` Anthoine Bourgeois
@ 2013-07-17 21:44 ` Deucher, Alexander
2013-07-17 21:55 ` Anthoine Bourgeois
0 siblings, 1 reply; 5+ messages in thread
From: Deucher, Alexander @ 2013-07-17 21:44 UTC (permalink / raw)
To: Anthoine Bourgeois, Koenig, Christian, Jerome Glisse; +Cc: dri-devel
> -----Original Message-----
> From: Anthoine Bourgeois [mailto:anthoine.bourgeois@gmail.com]
> Sent: Wednesday, July 17, 2013 5:23 PM
> To: Deucher, Alexander; Koenig, Christian; Jerome Glisse
> Cc: dri-devel@lists.freedesktop.org
> Subject: Re: [PATCH] drm/radeon/dpm: add debugfs support for
> RS780/RS880 (v2)
>
> On Wed, Jul 17, 2013 at 08:54:33PM +0000, Deucher, Alexander wrote:
> >Good catch, I screwed up the ref divider calculation. How about the
> attached patch?
>
> It works too. But here was my logic, tell me if I'm wrong:
Ok.
>
> The output frequency of the PLL is equal to the VCO frequency (FVCO)
> divided by the post-scale counter (C).
> Fout = FVCO / C
> And VCO frequency is equal to feedback (M) times the reference frequency
> (FREF).
> FVCO = FREF x M
> Where reference clock (FREF) is equal to the input clock (Fin) divided
> by the pre-scale counter (N)
> FREF = Fin / N
> then
> FVCO = Fin x M / N
> and
> Fout = (Fin x M) / (N x C) = FREF x M / C
>
> where:
> FVCO = VCO frequency
> Fin = input frequency
> Fout = output frequency
> FREF = reference frequency (rdev->clock.spll.reference_freq in the code)
> M = counter (multiplier), part of the clock feedback path (current_fb_div)
> N = counter (divider), part of the clock reference path (ref_div)
> C = post-scale counter (divider) (post_div)
>
> No need to ref_div. Or reference_freq == Fin and the varname confuses me
> ?
I'm not sure exactly how the PLL is set up. The calculation looks like so:
Output frequency = (reference freq * feedback divider) / (reference divider * post divider);
I think FVCO = (FREF * M) / N to use your terms, but I'm not really a hw expert.
Alex
>
> In my test:
> # cat /sys/kernel/debug/dri/0/radeon_pm_info
> uvd vclk: 0 dclk: 0
> power level 0 sclk: 20000 vddc_index: 2
>
> when my system is idle and sclk == 19690 and:
> # cat /sys/kernel/debug/dri/0/radeon_pm_info
> uvd vclk: 0 dclk: 0
> power level 1 sclk: 50000 vddc_index: 2
>
> when I play supertuxkart with sclk == 49762.
>
> Thanks for yesturday, I was in a wrong way,
> Anthoine
>
> >
> >Alex
> >
> >> -----Original Message-----
> >> From: Anthoine Bourgeois [mailto:anthoine.bourgeois@gmail.com]
> >> Sent: Wednesday, July 17, 2013 4:43 PM
> >> To: Deucher, Alexander; Koenig, Christian; Jerome Glisse; Anthoine
> >> Bourgeois
> >> Cc: dri-devel@lists.freedesktop.org
> >> Subject: [PATCH] drm/radeon/dpm: add debugfs support for
> RS780/RS880
> >> (v2)
> >>
> >> This allows you to look at the current DPM state via
> >> debugfs.
> >>
> >> Due to the way the hardware works on these asics, there's
> >> no way to look up exactly what power state we are in, so
> >> we make the best guess we can based on the current sclk.
> >>
> >> v2: fix sclk equation
> >>
> >> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> >> Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
> >> ---
> >> drivers/gpu/drm/radeon/radeon_asic.c | 1 +
> >> drivers/gpu/drm/radeon/radeon_asic.h | 2 ++
> >> drivers/gpu/drm/radeon/rs780_dpm.c | 23
> +++++++++++++++++++++++
> >> drivers/gpu/drm/radeon/rs780d.h | 3 +++
> >> 4 files changed, 29 insertions(+)
> >>
> >> diff --git a/drivers/gpu/drm/radeon/radeon_asic.c
> >> b/drivers/gpu/drm/radeon/radeon_asic.c
> >> index fea997e..78bec1a 100644
> >> --- a/drivers/gpu/drm/radeon/radeon_asic.c
> >> +++ b/drivers/gpu/drm/radeon/radeon_asic.c
> >> @@ -1270,6 +1270,7 @@ static struct radeon_asic rs780_asic = {
> >> .get_sclk = &rs780_dpm_get_sclk,
> >> .get_mclk = &rs780_dpm_get_mclk,
> >> .print_power_state = &rs780_dpm_print_power_state,
> >> + .debugfs_print_current_performance_level =
> >> &rs780_dpm_debugfs_print_current_performance_level,
> >> },
> >> .pflip = {
> >> .pre_page_flip = &rs600_pre_page_flip,
> >> diff --git a/drivers/gpu/drm/radeon/radeon_asic.h
> >> b/drivers/gpu/drm/radeon/radeon_asic.h
> >> index b04b578..ca18957 100644
> >> --- a/drivers/gpu/drm/radeon/radeon_asic.h
> >> +++ b/drivers/gpu/drm/radeon/radeon_asic.h
> >> @@ -433,6 +433,8 @@ u32 rs780_dpm_get_sclk(struct radeon_device
> *rdev,
> >> bool low);
> >> u32 rs780_dpm_get_mclk(struct radeon_device *rdev, bool low);
> >> void rs780_dpm_print_power_state(struct radeon_device *rdev,
> >> struct radeon_ps *ps);
> >> +void rs780_dpm_debugfs_print_current_performance_level(struct
> >> radeon_device *rdev,
> >> + struct seq_file *m);
> >>
> >> /* uvd */
> >> int r600_uvd_init(struct radeon_device *rdev);
> >> diff --git a/drivers/gpu/drm/radeon/rs780_dpm.c
> >> b/drivers/gpu/drm/radeon/rs780_dpm.c
> >> index bef832a..7f128c2 100644
> >> --- a/drivers/gpu/drm/radeon/rs780_dpm.c
> >> +++ b/drivers/gpu/drm/radeon/rs780_dpm.c
> >> @@ -28,6 +28,7 @@
> >> #include "r600_dpm.h"
> >> #include "rs780_dpm.h"
> >> #include "atom.h"
> >> +#include <linux/seq_file.h>
> >>
> >> static struct igp_ps *rs780_get_ps(struct radeon_ps *rps)
> >> {
> >> @@ -961,3 +962,25 @@ u32 rs780_dpm_get_mclk(struct radeon_device
> >> *rdev, bool low)
> >>
> >> return pi->bootup_uma_clk;
> >> }
> >> +
> >> +void rs780_dpm_debugfs_print_current_performance_level(struct
> >> radeon_device *rdev,
> >> + struct seq_file *m)
> >> +{
> >> + struct radeon_ps *rps = rdev->pm.dpm.current_ps;
> >> + struct igp_ps *ps = rs780_get_ps(rps);
> >> + u32 current_fb_div = RREG32(FVTHROT_STATUS_REG0) &
> >> CURRENT_FEEDBACK_DIV_MASK;
> >> + u32 func_cntl = RREG32(CG_SPLL_FUNC_CNTL);
> >> + u32 post_div = ((func_cntl & SPLL_SW_HILEN_MASK) >>
> >> SPLL_SW_HILEN_SHIFT) + 1 +
> >> + ((func_cntl & SPLL_SW_LOLEN_MASK) >>
> >> SPLL_SW_LOLEN_SHIFT) + 1;
> >> + u32 sclk = (rdev->clock.spll.reference_freq * current_fb_div) /
> >> post_div;
> >> +
> >> + seq_printf(m, "uvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
> >> +
> >> + /* guess based on the current sclk */
> >> + if (sclk < (ps->sclk_low + 500))
> >> + seq_printf(m, "power level 0 sclk: %u vddc_index: %d\n",
> >> + ps->sclk_low, ps->min_voltage);
> >> + else
> >> + seq_printf(m, "power level 1 sclk: %u vddc_index: %d\n",
> >> + ps->sclk_high, ps->max_voltage);
> >> +}
> >> diff --git a/drivers/gpu/drm/radeon/rs780d.h
> >> b/drivers/gpu/drm/radeon/rs780d.h
> >> index b1142ed..cfbe9a4 100644
> >> --- a/drivers/gpu/drm/radeon/rs780d.h
> >> +++ b/drivers/gpu/drm/radeon/rs780d.h
> >> @@ -28,6 +28,7 @@
> >> # define SPLL_SLEEP (1 << 1)
> >> # define SPLL_REF_DIV(x) ((x) << 2)
> >> # define SPLL_REF_DIV_MASK (7 << 2)
> >> +# define SPLL_REF_DIV_SHIFT 2
> >> # define SPLL_FB_DIV(x) ((x) << 5)
> >> # define SPLL_FB_DIV_MASK (0xff << 2)
> >> # define SPLL_FB_DIV_SHIFT 2
> >> @@ -36,8 +37,10 @@
> >> # define SPLL_PULSENUM_MASK (3 << 14)
> >> # define SPLL_SW_HILEN(x) ((x) << 16)
> >> # define SPLL_SW_HILEN_MASK (0xf << 16)
> >> +# define SPLL_SW_HILEN_SHIFT 16
> >> # define SPLL_SW_LOLEN(x) ((x) << 20)
> >> # define SPLL_SW_LOLEN_MASK (0xf << 20)
> >> +# define SPLL_SW_LOLEN_SHIFT 20
> >> # define SPLL_DIVEN (1 << 24)
> >> # define SPLL_BYPASS_EN (1 << 25)
> >> # define SPLL_CHG_STATUS (1 << 29)
> >> --
> >> 1.8.1.5
> >>
> >
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] drm/radeon/dpm: add debugfs support for RS780/RS880 (v2)
2013-07-17 21:44 ` Deucher, Alexander
@ 2013-07-17 21:55 ` Anthoine Bourgeois
0 siblings, 0 replies; 5+ messages in thread
From: Anthoine Bourgeois @ 2013-07-17 21:55 UTC (permalink / raw)
To: Deucher, Alexander, Christian König, Jerome Glisse,
Anthoine Bourgeois
Cc: dri-devel
On Wed, Jul 17, 2013 at 09:44:00PM +0000, Deucher, Alexander wrote:
>> -----Original Message-----
>> From: Anthoine Bourgeois [mailto:anthoine.bourgeois@gmail.com]
>> Sent: Wednesday, July 17, 2013 5:23 PM
>> To: Deucher, Alexander; Koenig, Christian; Jerome Glisse
>> Cc: dri-devel@lists.freedesktop.org
>> Subject: Re: [PATCH] drm/radeon/dpm: add debugfs support for
>> RS780/RS880 (v2)
>>
>> On Wed, Jul 17, 2013 at 08:54:33PM +0000, Deucher, Alexander wrote:
>> >Good catch, I screwed up the ref divider calculation. How about the
>> attached patch?
>>
>> It works too. But here was my logic, tell me if I'm wrong:
>
>Ok.
>
>>
>> The output frequency of the PLL is equal to the VCO frequency (FVCO)
>> divided by the post-scale counter (C).
>> Fout = FVCO / C
>> And VCO frequency is equal to feedback (M) times the reference frequency
>> (FREF).
>> FVCO = FREF x M
>> Where reference clock (FREF) is equal to the input clock (Fin) divided
>> by the pre-scale counter (N)
>> FREF = Fin / N
>> then
>> FVCO = Fin x M / N
>> and
>> Fout = (Fin x M) / (N x C) = FREF x M / C
>>
>> where:
>> FVCO = VCO frequency
>> Fin = input frequency
>> Fout = output frequency
>> FREF = reference frequency (rdev->clock.spll.reference_freq in the code)
>> M = counter (multiplier), part of the clock feedback path (current_fb_div)
>> N = counter (divider), part of the clock reference path (ref_div)
>> C = post-scale counter (divider) (post_div)
>>
>> No need to ref_div. Or reference_freq == Fin and the varname confuses me
>> ?
>
>I'm not sure exactly how the PLL is set up. The calculation looks like so:
>
>Output frequency = (reference freq * feedback divider) / (reference divider * post divider);
>
>I think FVCO = (FREF * M) / N to use your terms, but I'm not really a hw expert.
Neither me. I trust you, then :
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
on v3.
Anthoine
>
>Alex
>
>>
>> In my test:
>> # cat /sys/kernel/debug/dri/0/radeon_pm_info
>> uvd vclk: 0 dclk: 0
>> power level 0 sclk: 20000 vddc_index: 2
>>
>> when my system is idle and sclk == 19690 and:
>> # cat /sys/kernel/debug/dri/0/radeon_pm_info
>> uvd vclk: 0 dclk: 0
>> power level 1 sclk: 50000 vddc_index: 2
>>
>> when I play supertuxkart with sclk == 49762.
>>
>> Thanks for yesturday, I was in a wrong way,
>> Anthoine
>>
>> >
>> >Alex
>> >
>> >> -----Original Message-----
>> >> From: Anthoine Bourgeois [mailto:anthoine.bourgeois@gmail.com]
>> >> Sent: Wednesday, July 17, 2013 4:43 PM
>> >> To: Deucher, Alexander; Koenig, Christian; Jerome Glisse; Anthoine
>> >> Bourgeois
>> >> Cc: dri-devel@lists.freedesktop.org
>> >> Subject: [PATCH] drm/radeon/dpm: add debugfs support for
>> RS780/RS880
>> >> (v2)
>> >>
>> >> This allows you to look at the current DPM state via
>> >> debugfs.
>> >>
>> >> Due to the way the hardware works on these asics, there's
>> >> no way to look up exactly what power state we are in, so
>> >> we make the best guess we can based on the current sclk.
>> >>
>> >> v2: fix sclk equation
>> >>
>> >> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> >> Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
>> >> ---
>> >> drivers/gpu/drm/radeon/radeon_asic.c | 1 +
>> >> drivers/gpu/drm/radeon/radeon_asic.h | 2 ++
>> >> drivers/gpu/drm/radeon/rs780_dpm.c | 23
>> +++++++++++++++++++++++
>> >> drivers/gpu/drm/radeon/rs780d.h | 3 +++
>> >> 4 files changed, 29 insertions(+)
>> >>
>> >> diff --git a/drivers/gpu/drm/radeon/radeon_asic.c
>> >> b/drivers/gpu/drm/radeon/radeon_asic.c
>> >> index fea997e..78bec1a 100644
>> >> --- a/drivers/gpu/drm/radeon/radeon_asic.c
>> >> +++ b/drivers/gpu/drm/radeon/radeon_asic.c
>> >> @@ -1270,6 +1270,7 @@ static struct radeon_asic rs780_asic = {
>> >> .get_sclk = &rs780_dpm_get_sclk,
>> >> .get_mclk = &rs780_dpm_get_mclk,
>> >> .print_power_state = &rs780_dpm_print_power_state,
>> >> + .debugfs_print_current_performance_level =
>> >> &rs780_dpm_debugfs_print_current_performance_level,
>> >> },
>> >> .pflip = {
>> >> .pre_page_flip = &rs600_pre_page_flip,
>> >> diff --git a/drivers/gpu/drm/radeon/radeon_asic.h
>> >> b/drivers/gpu/drm/radeon/radeon_asic.h
>> >> index b04b578..ca18957 100644
>> >> --- a/drivers/gpu/drm/radeon/radeon_asic.h
>> >> +++ b/drivers/gpu/drm/radeon/radeon_asic.h
>> >> @@ -433,6 +433,8 @@ u32 rs780_dpm_get_sclk(struct radeon_device
>> *rdev,
>> >> bool low);
>> >> u32 rs780_dpm_get_mclk(struct radeon_device *rdev, bool low);
>> >> void rs780_dpm_print_power_state(struct radeon_device *rdev,
>> >> struct radeon_ps *ps);
>> >> +void rs780_dpm_debugfs_print_current_performance_level(struct
>> >> radeon_device *rdev,
>> >> + struct seq_file *m);
>> >>
>> >> /* uvd */
>> >> int r600_uvd_init(struct radeon_device *rdev);
>> >> diff --git a/drivers/gpu/drm/radeon/rs780_dpm.c
>> >> b/drivers/gpu/drm/radeon/rs780_dpm.c
>> >> index bef832a..7f128c2 100644
>> >> --- a/drivers/gpu/drm/radeon/rs780_dpm.c
>> >> +++ b/drivers/gpu/drm/radeon/rs780_dpm.c
>> >> @@ -28,6 +28,7 @@
>> >> #include "r600_dpm.h"
>> >> #include "rs780_dpm.h"
>> >> #include "atom.h"
>> >> +#include <linux/seq_file.h>
>> >>
>> >> static struct igp_ps *rs780_get_ps(struct radeon_ps *rps)
>> >> {
>> >> @@ -961,3 +962,25 @@ u32 rs780_dpm_get_mclk(struct radeon_device
>> >> *rdev, bool low)
>> >>
>> >> return pi->bootup_uma_clk;
>> >> }
>> >> +
>> >> +void rs780_dpm_debugfs_print_current_performance_level(struct
>> >> radeon_device *rdev,
>> >> + struct seq_file *m)
>> >> +{
>> >> + struct radeon_ps *rps = rdev->pm.dpm.current_ps;
>> >> + struct igp_ps *ps = rs780_get_ps(rps);
>> >> + u32 current_fb_div = RREG32(FVTHROT_STATUS_REG0) &
>> >> CURRENT_FEEDBACK_DIV_MASK;
>> >> + u32 func_cntl = RREG32(CG_SPLL_FUNC_CNTL);
>> >> + u32 post_div = ((func_cntl & SPLL_SW_HILEN_MASK) >>
>> >> SPLL_SW_HILEN_SHIFT) + 1 +
>> >> + ((func_cntl & SPLL_SW_LOLEN_MASK) >>
>> >> SPLL_SW_LOLEN_SHIFT) + 1;
>> >> + u32 sclk = (rdev->clock.spll.reference_freq * current_fb_div) /
>> >> post_div;
>> >> +
>> >> + seq_printf(m, "uvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
>> >> +
>> >> + /* guess based on the current sclk */
>> >> + if (sclk < (ps->sclk_low + 500))
>> >> + seq_printf(m, "power level 0 sclk: %u vddc_index: %d\n",
>> >> + ps->sclk_low, ps->min_voltage);
>> >> + else
>> >> + seq_printf(m, "power level 1 sclk: %u vddc_index: %d\n",
>> >> + ps->sclk_high, ps->max_voltage);
>> >> +}
>> >> diff --git a/drivers/gpu/drm/radeon/rs780d.h
>> >> b/drivers/gpu/drm/radeon/rs780d.h
>> >> index b1142ed..cfbe9a4 100644
>> >> --- a/drivers/gpu/drm/radeon/rs780d.h
>> >> +++ b/drivers/gpu/drm/radeon/rs780d.h
>> >> @@ -28,6 +28,7 @@
>> >> # define SPLL_SLEEP (1 << 1)
>> >> # define SPLL_REF_DIV(x) ((x) << 2)
>> >> # define SPLL_REF_DIV_MASK (7 << 2)
>> >> +# define SPLL_REF_DIV_SHIFT 2
>> >> # define SPLL_FB_DIV(x) ((x) << 5)
>> >> # define SPLL_FB_DIV_MASK (0xff << 2)
>> >> # define SPLL_FB_DIV_SHIFT 2
>> >> @@ -36,8 +37,10 @@
>> >> # define SPLL_PULSENUM_MASK (3 << 14)
>> >> # define SPLL_SW_HILEN(x) ((x) << 16)
>> >> # define SPLL_SW_HILEN_MASK (0xf << 16)
>> >> +# define SPLL_SW_HILEN_SHIFT 16
>> >> # define SPLL_SW_LOLEN(x) ((x) << 20)
>> >> # define SPLL_SW_LOLEN_MASK (0xf << 20)
>> >> +# define SPLL_SW_LOLEN_SHIFT 20
>> >> # define SPLL_DIVEN (1 << 24)
>> >> # define SPLL_BYPASS_EN (1 << 25)
>> >> # define SPLL_CHG_STATUS (1 << 29)
>> >> --
>> >> 1.8.1.5
>> >>
>> >
>>
>>
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-07-17 21:52 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-17 20:42 [PATCH] drm/radeon/dpm: add debugfs support for RS780/RS880 (v2) Anthoine Bourgeois
2013-07-17 20:54 ` Deucher, Alexander
2013-07-17 21:23 ` Anthoine Bourgeois
2013-07-17 21:44 ` Deucher, Alexander
2013-07-17 21:55 ` Anthoine Bourgeois
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.