[linux-dvb] Proftuners S2-8000 support

[linux-dvb] Proftuners S2-8000 support

[Taner Taş]

[-- Attachment #1.1: Type: text/plain, Size: 3293 bytes --]

Hi,

I have recently purchased Proftuners S2-8000 PCI-e card which consist of :

* CX23885 pci-e interface
* STB6100 Frontend
* STV0900 Demodulator

Vendor company supposed that card has Linux support via an additional patch
in their support page. I applied patch v4l-dvb and s2-liplianin
repositories. Patch applied and compiled modules loaded via success, but
could not able to work properly. I got mass of log messages below during
launch VDR application.

Insructions: http://www.proftuners.com/driver8000.html
Patch: http://www.proftuners.com/sites/default/files/prof8000.patch

kernel.log
-----------------------------------
stv0900_search:
stv0900_algo
stv0900_set_symbol_rate: Mclk 4500000, SR 1000000, Dmd 0
stv0900_set_tuner: Frequency=1146000
stv0900_set_tuner: Bandwidth=72000000
stv0900_algo: NO AGC1, POWERI, POWERQ
Search Fail
stv0900_read_status:
stv0900_status: locked = 0
stv0900_get_mclk_freq: Calculated Mclk = 4500000
TS bitrate = 0 Mbit/sec
DEMOD LOCK FAIL
stv0900_search:
stv0900_algo
stv0900_set_symbol_rate: Mclk 4500000, SR 1000000, Dmd 0
stv0900_set_tuner: Frequency=1146000
stv0900_set_tuner: Bandwidth=72000000
stv0900_algo: NO AGC1, POWERI, POWERQ
Search Fail
stv0900_read_status:
stv0900_status: locked = 0
stv0900_get_mclk_freq: Calculated Mclk = 4500000
TS bitrate = 0 Mbit/sec
DEMOD LOCK FAIL
-----------------------------------

Here is the log messages during card has detected:

-----------------------------------
Octt 16 17:27:39 localhost kernel: cx23885 driver version 0.0.2 loaded
Oct 16 17:27:39 localhost kernel: cx23885 0000:03:00.0: PCI INT A ->
Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
Oct 16 17:27:39 localhost kernel: CORE cx23885[0]: subsystem: 8000:3034,
board: Prof Revolution DVB-S2 8000 [card=29,autodetected]
Oct 16 17:03:34 localhost kernel: cx23885_dvb_register() allocating 1
frontend(s)
Oct 16 17:03:34 localhost kernel: cx23885[0]: cx23885 based dvb card
Oct 16 17:03:34 localhost kernel: stv0900_init_internal
Oct 16 17:03:34 localhost kernel: stv0900_init_internal: Create New Internal
Structure!
Oct 16 17:03:34 localhost kernel: stv0900_st_dvbs2_single
Oct 16 17:03:34 localhost kernel: stv0900_stop_all_s2_modcod
Oct 16 17:03:34 localhost kernel: stv0900_activate_s2_modcod_single
Oct 16 17:03:34 localhost kernel: stv0900_set_ts_parallel_serial
Oct 16 17:03:34 localhost kernel: stv0900_set_mclk: Mclk set to 135000000,
Quartz = 27000000
Oct 16 17:03:34 localhost kernel: stv0900_get_mclk_freq: Calculated Mclk =
4500000
Oct 16 17:03:34 localhost kernel: stv0900_get_mclk_freq: Calculated Mclk =
4500000
Oct 16 17:03:34 localhost kernel: stv0900_attach: Attaching STV0900
demodulator(0)
Oct 16 17:03:34 localhost kernel: stb6100_attach: Attaching STB6100
Oct 16 17:03:34 localhost kernel: DVB: registering new adapter (cx23885[0])
Oct 16 17:03:34 localhost kernel: DVB: registering adapter 0 frontend 0
(STV0900 frontend)...
Oct 16 17:03:34 localhost kernel: cx23885_dev_checkrevision() Hardware
revision = 0xb0
Oct 16 17:03:34 localhost kernel: cx23885[0]/0: found at 0000:03:00.0, rev:
2, irq: 18, latency: 0, mmio: 0xfbe00000
Oct 16 17:03:34 localhost kernel: cx23885 0000:03:00.0: setting latency
timer to 64
-----------------------------------

Kernel: 2.6.35  x64
Distro: Archlinux/Gentoo x64
App: VDR 1.7.16

Thanks.

[-- Attachment #1.2: Type: text/html, Size: 3705 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb