* [PATCH 1/5] Use common files for AT91SAM9 configuration
@ 2010-10-16 12:50 ulf.samuelsson
2010-10-16 12:50 ` [PATCH 2/5] Add AT91SAM9 linux-2.6.30 from www.linux4sam.org ulf.samuelsson
2010-10-18 13:20 ` [PATCH 1/5] Use common files for AT91SAM9 configuration Marcin Juszkiewicz
0 siblings, 2 replies; 33+ messages in thread
From: ulf.samuelsson @ 2010-10-16 12:50 UTC (permalink / raw)
To: openembedded-devel; +Cc: Ulf Samuelsson
From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
---
conf/machine/at91sam9g10ek.conf | 21 +++----------
conf/machine/at91sam9g20ek.conf | 26 ++++------------
conf/machine/at91sam9g45ek.conf | 13 +++-----
conf/machine/at91sam9g45ekes.conf | 31 +++++++++++---------
conf/machine/at91sam9m10ekes.conf | 22 ++++++++++++++
conf/machine/at91sam9m10g45ek.conf | 22 ++++++++++++++
conf/machine/include/AT91-LCD.inc | 15 ----------
conf/machine/include/AT91.inc | 51 ----------------------------------
conf/machine/include/at91-2.6.30.inc | 39 ++++++++++++++++++++++++++
conf/machine/include/at91-2.6.32.inc | 41 +++++++++++++++++++++++++++
conf/machine/include/at91-lcd.inc | 30 ++++++++++++++++++++
11 files changed, 188 insertions(+), 123 deletions(-)
create mode 100644 conf/machine/at91sam9m10ekes.conf
create mode 100644 conf/machine/at91sam9m10g45ek.conf
delete mode 100644 conf/machine/include/AT91-LCD.inc
delete mode 100644 conf/machine/include/AT91.inc
create mode 100644 conf/machine/include/at91-2.6.30.inc
create mode 100644 conf/machine/include/at91-2.6.32.inc
create mode 100644 conf/machine/include/at91-lcd.inc
diff --git a/conf/machine/at91sam9g10ek.conf b/conf/machine/at91sam9g10ek.conf
index 9f41fd9..82775b6 100644
--- a/conf/machine/at91sam9g10ek.conf
+++ b/conf/machine/at91sam9g10ek.conf
@@ -2,22 +2,11 @@
#@Name: Atmel AT91SAM9G10EK Development Platform
#@DESCRIPTION: Machine configuration for the at91sam9g10ek development board with a at91sam9g10 processor
-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+include conf/machine/include/at91-2.6.30.inc
+include conf/machine/include/at91-lcd.inc
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+UBOOT_MACHINE = "at91sam9g10ek_dataflash_cs0_config"
+AT91BOOTSTRAP_BOARD = "at91sam9g10ek at91sam9g10df at91sam9g10nf"
-KERNEL_IMAGETYPE = "uImage"
+MACHINE_FEATURES += "usbhost"
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
-
-require conf/machine/include/tune-arm926ejs.inc
diff --git a/conf/machine/at91sam9g20ek.conf b/conf/machine/at91sam9g20ek.conf
index 59c5a42..f63d75e 100644
--- a/conf/machine/at91sam9g20ek.conf
+++ b/conf/machine/at91sam9g20ek.conf
@@ -2,25 +2,13 @@
#@Name: Atmel AT91SAM9G20EK Development Platform
#@DESCRIPTION: Machine configuration for the at91sam9g20ek development board with a at91sam9g20 processor
-TARGET_ARCH = "arm"
+include conf/machine/include/at91-2.6.30.inc
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
+# UBOOT_MACHINE = "at91sam9g20ek_nandflash_config"
+# UBOOT_MACHINE = "at91sam9g20ek_dataflash_cs0_config"
+UBOOT_MACHINE = "at91sam9g20ek_dataflash_cs1_config"
+# UBOOT_MACHINE = "at91sam9g20ek_config"
-KERNEL_IMAGETYPE = "uImage"
-UBOOT_MACHINE = "at91sam9g20ek_config"
+AT91BOOTSTRAP_BOARD = "at91sam9g20ek at91sam9g20df at91sam9g20nf"
-PREFERRED_VERSION_at91bootstrap = "2.10"
-
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget"
-EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
-
-require conf/machine/include/tune-arm926ejs.inc
+MACHINE_FEATURES += "usbhost"
diff --git a/conf/machine/at91sam9g45ek.conf b/conf/machine/at91sam9g45ek.conf
index 98fd711..406cc52 100644
--- a/conf/machine/at91sam9g45ek.conf
+++ b/conf/machine/at91sam9g45ek.conf
@@ -1,13 +1,12 @@
#@TYPE: Machine
#@Name: Atmel AT91SAM9G45EK Development Platform
-#@DESCRIPTION: Machine configuration for the at91sam9g45ek development board with a at91sam9g45-ES2 processor
-# Once a at91sam9g45ek development board with a production at91sam9g45 processor
-# is available we should change the recipe to use the at91sam9m10g45ek_defconfig
+#@DESCRIPTION: Machine configuration for the at91sam9m10g45ek board with a at91sam9g45 processor
-include conf/machine/include/AT91-LCD.inc
+include conf/machine/include/at91-2.6.30.inc
+include conf/machine/include/at91-lcd.inc
# Has linux config file in OpenEmbedded
-#
+#
# LINUX26_DEFCONFIG = "at91sam9g45ek_defconfig"
# LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig"
@@ -21,9 +20,7 @@ UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config"
#UBOOT_MACHINE = "at91sam9g45ekes_dataflash_cs0_config"
#UBOOT_MACHINE = "at91sam9g45ekes_config"
-# Boot from Dataflash, so we do not have to reprogram
-# At91bootstrap/U-Boot everytime we erase the NAND flash
-AT91BOOTSTRAP_BOARD = "at91sam9g45df"
+AT91BOOTSTRAP_BOARD = "at91sam9g45df at91sam9g45ek at91sam9g45nf"
MACHINE_FEATURES += "usbhost"
diff --git a/conf/machine/at91sam9g45ekes.conf b/conf/machine/at91sam9g45ekes.conf
index 2d962ef..a736b5c 100644
--- a/conf/machine/at91sam9g45ekes.conf
+++ b/conf/machine/at91sam9g45ekes.conf
@@ -2,22 +2,25 @@
#@Name: Atmel AT91SAM9G45EKES Development Platform
#@DESCRIPTION: Machine configuration for the at91sam9g45ekes development board with a at91sam9g45-es processor
-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+include conf/machine/include/at91-2.6.30.inc
+include conf/machine/include/at91-lcd.inc
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+# Has linux config file in OpenEmbedded
+#
+# LINUX26_DEFCONFIG = "at91sam9g45ek_defconfig"
+# LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig"
-KERNEL_IMAGETYPE = "uImage"
+# Supported u-boot machines
+#UBOOT_MACHINE = "at91sam9m10g45ek_nandflash_config"
+#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_config"
+UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config"
+#UBOOT_MACHINE = "at91sam9m10g45ek_config"
+#UBOOT_MACHINE = "at91sam9g45ekes_nandflash_config"
+#UBOOT_MACHINE = "at91sam9g45ekes_dataflash_config"
+#UBOOT_MACHINE = "at91sam9g45ekes_dataflash_cs0_config"
+#UBOOT_MACHINE = "at91sam9g45ekes_config"
-#don't try to access tty1
-USE_VT = "0"
+AT91BOOTSTRAP_BOARD = "at91sam9g45df at91sam9g45ek at91sam9g45nf"
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
+MACHINE_FEATURES += "usbhost"
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
-
-require conf/machine/include/tune-arm926ejs.inc
diff --git a/conf/machine/at91sam9m10ekes.conf b/conf/machine/at91sam9m10ekes.conf
new file mode 100644
index 0000000..63d97a8
--- /dev/null
+++ b/conf/machine/at91sam9m10ekes.conf
@@ -0,0 +1,22 @@
+#@TYPE: Machine
+#@Name: Atmel AT91SAM9M10EKES Development Platform
+#@DESCRIPTION: Machine configuration for the at91sam9m10ekes board with a at91sam9m10-es2 processor
+
+include conf/machine/include/at91-2.6.30.inc
+include conf/machine/include/at91-lcd.inc
+
+# Has linux config file in OpenEmbedded
+#
+# LINUX26_DEFCONFIG = "at91sam9m10ekes_defconfig"
+# LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig"
+
+# Supported u-boot machines
+#UBOOT_MACHINE = "at91sam9m10g45ek_nandflash_config"
+#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_config"
+UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config"
+#UBOOT_MACHINE = "at91sam9m10g45ek_config"
+
+AT91BOOTSTRAP_BOARD = "at91sam9g45df at91sam9g45ek at91sam9g45nf"
+
+MACHINE_FEATURES += "usbhost"
+
diff --git a/conf/machine/at91sam9m10g45ek.conf b/conf/machine/at91sam9m10g45ek.conf
new file mode 100644
index 0000000..f3be65d
--- /dev/null
+++ b/conf/machine/at91sam9m10g45ek.conf
@@ -0,0 +1,22 @@
+#@TYPE: Machine
+#@Name: Atmel AT91SAM9M10G45EK Development Platform
+#@DESCRIPTION: Machine configuration for the at91sam9m10g45ek board with a at91sam9m10 processor
+
+include conf/machine/include/at91-2.6.30.inc
+include conf/machine/include/at91-lcd.inc
+
+# Has linux config file in OpenEmbedded
+#
+# LINUX26_DEFCONFIG = "at91sam9m10ekes_defconfig"
+# LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig"
+
+# Supported u-boot machines
+#UBOOT_MACHINE = "at91sam9m10g45ek_nandflash_config"
+#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_config"
+UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config"
+#UBOOT_MACHINE = "at91sam9m10g45ek_config"
+
+AT91BOOTSTRAP_BOARD = "at91sam9g45df at91sam9g45ek at91sam9g45nf"
+
+MACHINE_FEATURES += "usbhost"
+
diff --git a/conf/machine/include/AT91-LCD.inc b/conf/machine/include/AT91-LCD.inc
deleted file mode 100644
index 3036295..0000000
--- a/conf/machine/include/AT91-LCD.inc
+++ /dev/null
@@ -1,15 +0,0 @@
-# Common description for Atmel ARM processors with LCD controller
-
-include conf/machine/include/AT91.inc
-
-MACHINE_FEATURES += "screen touchscreen keyboard"
-
-# Some options we disable for now
-# MACHINE_FEATURES += "apm"
-# MACHINE_FEATURES += "lcd"
-# MACHINE_FEATURES += "bluetooth wifi irda phone gps"
-# MACHINE_FEATURES += "mmc mmcroot fat"
-# MACHINE_FEATURES += "i2c spi serial"
-# MACHINE_FEATURES += "sound libogg libvorbis"
-
-
diff --git a/conf/machine/include/AT91.inc b/conf/machine/include/AT91.inc
deleted file mode 100644
index 6c0f8f0..0000000
--- a/conf/machine/include/AT91.inc
+++ /dev/null
@@ -1,51 +0,0 @@
-# Common description for Atmel ARM processors
-
-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
-CPU_FAMILY = "at91"
-
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.32"
-
-#PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
-#PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive-1300"
-#PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-#PREFERRED_PROVIDER_xserver = "xserver-xorg"
-#PREFERRED_PROVIDER_xserver = "xserver-kdrive"
-#XSERVER = "xserver-kdrive-fbdev"
-# Angstrom defines:
-#PREFERRED_VERSION_xserver-kdrive = "1.4.0.90"
-#PREFERRED_VERSION_xserver-kdrive = "1.6.1"
-
-PREFERRED_PROVIDER_at91bootstrap = "at91bootstrap_2.13"
-PREFERRED_VERSION_at91bootstrap = "2.13"
-
-PREFERRED_PROVIDER_u-boot = "u-boot_2009.08"
-PREFERRED_VERSION_u-boot = "2009.08"
-
-KERNEL_IMAGETYPE = "uImage"
-
-# PREFERRED_VERSION_mplayer = "svn"
-
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = " kernel26 alsa ext2 usbgadget vfat uboot "
-EXTRA_IMAGEDEPENDS += "u-boot"
-EXTRA_IMAGEDEPENDS += "at91bootstrap"
-
-MACHINE_EXTRA_RDEPENDS += " kernel-modules "
-#MACHINE_EXTRA_RDEPENDS += " atmel-fixes "
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
-#
-# Uncomment or add kernel modules that should be autoloaded
-#module_autoload_g_file_storage = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_file_storage', '',d)}
-#module_autoload_g_ether = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_ether', '',d)}
-module_autoload_g_serial = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_serial', '',d)}
-
-require conf/machine/include/tune-arm926ejs.inc
-
diff --git a/conf/machine/include/at91-2.6.30.inc b/conf/machine/include/at91-2.6.30.inc
new file mode 100644
index 0000000..e245b15
--- /dev/null
+++ b/conf/machine/include/at91-2.6.30.inc
@@ -0,0 +1,39 @@
+# Common description for Atmel ARM processors
+
+TARGET_ARCH = "arm"
+#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+SOC_FAMILY = "at91"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_VERSION_linux = "2.6.30"
+
+PREFERRED_PROVIDER_at91bootstrap = "at91bootstrap_2.13"
+PREFERRED_VERSION_at91bootstrap = "2.13"
+
+PREFERRED_PROVIDER_u-boot = "u-boot_2009.11"
+PREFERRED_VERSION_u-boot = "2009.11"
+
+KERNEL_IMAGETYPE = "uImage"
+
+#don't try to access tty1
+USE_VT = "0"
+
+MACHINE_FEATURES = " kernel26 alsa ext2 usbgadget vfat uboot "
+EXTRA_IMAGEDEPENDS += "u-boot"
+EXTRA_IMAGEDEPENDS += "at91bootstrap"
+
+MACHINE_EXTRA_RDEPENDS += " kernel-modules "
+#MACHINE_EXTRA_RDEPENDS += " atmel-fixes "
+
+# used by sysvinit_2
+SERIAL_CONSOLE = "115200 ttyS0"
+IMAGE_FSTYPES ?= "jffs2"
+EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+#
+# Uncomment or add kernel modules that should be autoloaded
+#module_autoload_g_file_storage = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_file_storage', '',d)}
+#module_autoload_g_ether = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_ether', '',d)}
+module_autoload_g_serial = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_serial', '',d)}
+
+require conf/machine/include/tune-arm926ejs.inc
+
diff --git a/conf/machine/include/at91-2.6.32.inc b/conf/machine/include/at91-2.6.32.inc
new file mode 100644
index 0000000..f315af3
--- /dev/null
+++ b/conf/machine/include/at91-2.6.32.inc
@@ -0,0 +1,41 @@
+# Common description for Atmel ARM processors
+
+TARGET_ARCH = "arm"
+#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+SOC_FAMILY = "at91"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_VERSION_linux = "2.6.32"
+
+PREFERRED_PROVIDER_at91bootstrap = "at91bootstrap_2.13"
+PREFERRED_VERSION_at91bootstrap = "2.13"
+
+PREFERRED_PROVIDER_u-boot = "u-boot_2009.11"
+PREFERRED_VERSION_u-boot = "2009.11"
+
+KERNEL_IMAGETYPE = "uImage"
+
+# PREFERRED_VERSION_mplayer = "svn"
+
+#don't try to access tty1
+USE_VT = "0"
+
+MACHINE_FEATURES = " kernel26 alsa ext2 usbgadget vfat uboot "
+EXTRA_IMAGEDEPENDS += "u-boot"
+EXTRA_IMAGEDEPENDS += "at91bootstrap"
+
+MACHINE_EXTRA_RDEPENDS += " kernel-modules "
+#MACHINE_EXTRA_RDEPENDS += " atmel-fixes "
+
+# used by sysvinit_2
+SERIAL_CONSOLE = "115200 ttyS0"
+IMAGE_FSTYPES ?= "jffs2"
+EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+#
+# Uncomment or add kernel modules that should be autoloaded
+#module_autoload_g_file_storage = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_file_storage', '',d)}
+#module_autoload_g_ether = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_ether', '',d)}
+module_autoload_g_serial = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_serial', '',d)}
+
+require conf/machine/include/tune-arm926ejs.inc
+
diff --git a/conf/machine/include/at91-lcd.inc b/conf/machine/include/at91-lcd.inc
new file mode 100644
index 0000000..9611a18
--- /dev/null
+++ b/conf/machine/include/at91-lcd.inc
@@ -0,0 +1,30 @@
+# Common description for Atmel ARM processors with LCD controller
+
+#PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
+#PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive-1300"
+#PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+#PREFERRED_PROVIDER_xserver = "xserver-xorg"
+PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+#XSERVER = "xserver-kdrive-fbdev"
+#XSERVER = "xserver-xorg \
+# xf86-input-evdev \
+# xf86-input-mouse \
+# xf86-input-tslib \
+# xf86-video-fbdev \
+# xf86-input-keyboard"
+
+# Angstrom defines:
+#PREFERRED_VERSION_xserver-kdrive = "1.4.0.90"
+#PREFERRED_VERSION_xserver-kdrive = "1.6.1"
+
+MACHINE_FEATURES += "screen touchscreen keyboard"
+
+# Some options we disable for now
+# MACHINE_FEATURES += "apm"
+# MACHINE_FEATURES += "lcd"
+# MACHINE_FEATURES += "bluetooth wifi irda phone gps"
+# MACHINE_FEATURES += "mmc mmcroot fat"
+# MACHINE_FEATURES += "i2c spi serial"
+# MACHINE_FEATURES += "sound libogg libvorbis"
+
+
--
1.6.3.3
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 2/5] Add AT91SAM9 linux-2.6.30 from www.linux4sam.org
2010-10-16 12:50 [PATCH 1/5] Use common files for AT91SAM9 configuration ulf.samuelsson
@ 2010-10-16 12:50 ` ulf.samuelsson
2010-10-16 12:50 ` [PATCH 3/5] Add u-boot-2009.11 support for AT91SAM9 ulf.samuelsson
2010-10-18 13:20 ` [PATCH 1/5] Use common files for AT91SAM9 configuration Marcin Juszkiewicz
1 sibling, 1 reply; 33+ messages in thread
From: ulf.samuelsson @ 2010-10-16 12:50 UTC (permalink / raw)
To: openembedded-devel; +Cc: Ulf Samuelsson
From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
---
....30-001-configurable-partition-size.patch.patch | 362 +++++
.../at91/linux-2.6.30-002-mach-at91-Kconfig.patch | 196 +++
.../at91/linux-2.6.30-003-sam9m10g45ek.patch | 29 +
recipes/linux/linux-2.6.30/at91sam9260ek/defconfig | 1492 ++++++++++++++++++
recipes/linux/linux-2.6.30/at91sam9261ek/defconfig | 1531 ++++++++++++++++++
recipes/linux/linux-2.6.30/at91sam9g10ek/defconfig | 1528 ++++++++++++++++++
recipes/linux/linux-2.6.30/at91sam9g20ek/defconfig | 1563 ++++++++++++++++++
.../linux-2.6.30/at91sam9g20ek_2mmc/defconfig | 1561 ++++++++++++++++++
recipes/linux/linux-2.6.30/at91sam9g45ek/defconfig | 1651 ++++++++++++++++++++
.../linux/linux-2.6.30/at91sam9g45ekes/defconfig | 1618 +++++++++++++++++++
.../linux/linux-2.6.30/at91sam9m10ekes/defconfig | 1617 +++++++++++++++++++
recipes/linux/linux-2.6.30/at91sam9rlek/defconfig | 1378 ++++++++++++++++
recipes/linux/linux-2.6.30/at91sam9xeek/defconfig | 1492 ++++++++++++++++++
recipes/linux/linux_2.6.30.bb | 25 +-
14 files changed, 16039 insertions(+), 4 deletions(-)
create mode 100644 recipes/linux/linux-2.6.30/at91/linux-2.6.30-001-configurable-partition-size.patch.patch
create mode 100644 recipes/linux/linux-2.6.30/at91/linux-2.6.30-002-mach-at91-Kconfig.patch
create mode 100644 recipes/linux/linux-2.6.30/at91/linux-2.6.30-003-sam9m10g45ek.patch
create mode 100644 recipes/linux/linux-2.6.30/at91sam9260ek/defconfig
create mode 100644 recipes/linux/linux-2.6.30/at91sam9261ek/defconfig
create mode 100644 recipes/linux/linux-2.6.30/at91sam9g10ek/defconfig
create mode 100644 recipes/linux/linux-2.6.30/at91sam9g20ek/defconfig
create mode 100644 recipes/linux/linux-2.6.30/at91sam9g20ek_2mmc/defconfig
create mode 100644 recipes/linux/linux-2.6.30/at91sam9g45ek/defconfig
create mode 100644 recipes/linux/linux-2.6.30/at91sam9g45ekes/defconfig
create mode 100644 recipes/linux/linux-2.6.30/at91sam9m10ekes/defconfig
create mode 100644 recipes/linux/linux-2.6.30/at91sam9rlek/defconfig
create mode 100644 recipes/linux/linux-2.6.30/at91sam9xeek/defconfig
diff --git a/recipes/linux/linux-2.6.30/at91/linux-2.6.30-001-configurable-partition-size.patch.patch b/recipes/linux/linux-2.6.30/at91/linux-2.6.30-001-configurable-partition-size.patch.patch
new file mode 100644
index 0000000..ae24d12
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91/linux-2.6.30-001-configurable-partition-size.patch.patch
@@ -0,0 +1,362 @@
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-at572d940hf_ek.c linux-2.6.30/arch/arm/mach-at91/board-at572d940hf_ek.c
+--- linux-2.6.30-0rig/arch/arm/mach-at91/board-at572d940hf_ek.c 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/board-at572d940hf_ek.c 2010-03-14 11:28:55.000000000 +0100
+@@ -114,10 +114,20 @@
+ */
+ static struct mtd_partition __initdata eb_nand_partition[] = {
+ {
+- .name = "Partition 1",
+- .offset = 0,
++ .name = "Bootstrap",
++ .offset = 0,
++ .size = 4 * SZ_1M,
++ },
++ {
++ .name = "Root File System",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++ },
++ {
++ .name = "Data",
++ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+- }
++ },
+ };
+
+ static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-cap9adk.c linux-2.6.30/arch/arm/mach-at91/board-cap9adk.c
+--- linux-2.6.30-0rig/arch/arm/mach-at91/board-cap9adk.c 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/board-cap9adk.c 2010-03-14 11:28:36.000000000 +0100
+@@ -167,8 +167,18 @@
+ */
+ static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
+ {
+- .name = "NAND partition",
+- .offset = 0,
++ .name = "Bootstrap",
++ .offset = 0,
++ .size = 4 * SZ_1M,
++ },
++ {
++ .name = "Root File System",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++ },
++ {
++ .name = "Data",
++ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+ };
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-dk.c linux-2.6.30/arch/arm/mach-at91/board-dk.c
+--- linux-2.6.30-0rig/arch/arm/mach-at91/board-dk.c 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/board-dk.c 2010-03-14 11:28:43.000000000 +0100
+@@ -314,8 +314,18 @@
+
+ static struct mtd_partition __initdata dk_nand_partition[] = {
+ {
+- .name = "NAND Partition 1",
+- .offset = 0,
++ .name = "Bootstrap",
++ .offset = 0,
++ .size = 4 * SZ_1M,
++ },
++ {
++ .name = "Root File System",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++ },
++ {
++ .name = "Data",
++ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+ };
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9260ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9260ek.c
+--- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9260ek.c 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/board-sam9260ek.c 2010-03-14 11:26:57.000000000 +0100
+@@ -177,12 +177,17 @@
+ */
+ static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+- .name = "Partition 1",
+- .offset = 0,
+- .size = SZ_256K,
++ .name = "Bootstrap",
++ .offset = 0,
++ .size = 4 * SZ_1M,
+ },
+ {
+- .name = "Partition 2",
++ .name = "Root File System",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++ },
++ {
++ .name = "Data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9261ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9261ek.c
+--- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9261ek.c 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/board-sam9261ek.c 2010-03-14 11:26:57.000000000 +0100
+@@ -184,12 +184,17 @@
+ */
+ static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+- .name = "Partition 1",
+- .offset = 0,
+- .size = SZ_256K,
++ .name = "Bootstrap",
++ .offset = 0,
++ .size = 4 * SZ_1M,
+ },
+ {
+- .name = "Partition 2",
++ .name = "Root File System",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++ },
++ {
++ .name = "Data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9263ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9263ek.c
+--- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9263ek.c 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/board-sam9263ek.c 2010-03-14 11:26:57.000000000 +0100
+@@ -174,12 +174,17 @@
+ */
+ static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+- .name = "Partition 1",
+- .offset = 0,
+- .size = SZ_64M,
++ .name = "Bootstrap",
++ .offset = 0,
++ .size = 4 * SZ_1M,
+ },
+ {
+- .name = "Partition 2",
++ .name = "Root File System",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++ },
++ {
++ .name = "Data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c linux-2.6.30/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
+--- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c 2010-03-14 11:28:29.000000000 +0100
+@@ -130,12 +130,12 @@
+ .size = 4 * SZ_1M,
+ },
+ {
+- .name = "Partition 1",
++ .name = "Root File System",
+ .offset = MTDPART_OFS_NXTBLK,
+- .size = 60 * SZ_1M,
++ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
+ },
+ {
+- .name = "Partition 2",
++ .name = "Data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9g20ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9g20ek.c
+--- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9g20ek.c 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/board-sam9g20ek.c 2010-03-14 11:26:57.000000000 +0100
+@@ -129,12 +129,12 @@
+ .size = 4 * SZ_1M,
+ },
+ {
+- .name = "Partition 1",
++ .name = "Root File System",
+ .offset = MTDPART_OFS_NXTBLK,
+- .size = 60 * SZ_1M,
++ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
+ },
+ {
+- .name = "Partition 2",
++ .name = "Data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9m10g45ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9m10g45ek.c
+--- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9m10g45ek.c 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/board-sam9m10g45ek.c 2010-03-14 11:26:57.000000000 +0100
+@@ -133,12 +133,17 @@
+ */
+ static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+- .name = "Partition 1",
+- .offset = 0,
+- .size = SZ_64M,
++ .name = "Bootstrap",
++ .offset = 0,
++ .size = 4 * SZ_1M,
+ },
+ {
+- .name = "Partition 2",
++ .name = "Root File System",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++ },
++ {
++ .name = "Data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9rlek.c linux-2.6.30/arch/arm/mach-at91/board-sam9rlek.c
+--- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9rlek.c 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/board-sam9rlek.c 2010-03-14 11:26:57.000000000 +0100
+@@ -83,12 +83,17 @@
+ */
+ static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+- .name = "Partition 1",
+- .offset = 0,
+- .size = SZ_256K,
++ .name = "Bootstrap",
++ .offset = 0,
++ .size = 4 * SZ_1M,
+ },
+ {
+- .name = "Partition 2",
++ .name = "Root File System",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
++ },
++ {
++ .name = "Data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/Kconfig linux-2.6.30/arch/arm/mach-at91/Kconfig
+--- linux-2.6.30-0rig/arch/arm/mach-at91/Kconfig 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/Kconfig 2010-03-14 11:32:54.000000000 +0100
+@@ -96,6 +96,7 @@
+ config ARCH_AT91RM9200DK
+ bool "Atmel AT91RM9200-DK Development board"
+ depends on ARCH_AT91RM9200
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using Atmel's AT91RM9200-DK Development board.
+ (Discontinued)
+@@ -213,6 +214,7 @@
+ config MACH_AT91SAM9260EK
+ bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
+ depends on ARCH_AT91SAM9260
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+@@ -278,6 +280,7 @@
+ config MACH_AT91SAM9261EK
+ bool "Atmel AT91SAM9261-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9261
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+@@ -293,6 +296,7 @@
+ config MACH_AT91SAM9G10EK
+ bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9G10
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+@@ -308,6 +312,7 @@
+ config MACH_AT91SAM9263EK
+ bool "Atmel AT91SAM9263-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9263
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+@@ -350,6 +355,7 @@
+ config MACH_AT91SAM9RLEK
+ bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9RL
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
+
+@@ -364,6 +370,7 @@
+ config MACH_AT91SAM9G20EK
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9G20
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+ that embeds only one SD/MMC slot.
+@@ -371,6 +378,7 @@
+ config MACH_AT91SAM9G20EK_2MMC
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+ depends on ARCH_AT91SAM9G20
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+ with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+@@ -408,6 +416,7 @@
+ config MACH_AT91SAM9G45EKES
+ bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+ depends on ARCH_AT91SAM9G45
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
+ "ES" at the end of the name means that this board is an
+@@ -424,6 +433,7 @@
+ config MACH_AT91SAM9M10EKES
+ bool "Atmel AT91SAM9M10-EKES Evaluation Kit"
+ depends on ARCH_AT91SAM9M10
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using Atmel's AT91SAM9M10-EKES Evaluation Kit.
+ "ES" at the end of the name means that this board is an
+@@ -440,6 +450,7 @@
+ config MACH_AT91CAP9ADK
+ bool "Atmel AT91CAP9A-DK Evaluation Kit"
+ depends on ARCH_AT91CAP9
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
+@@ -455,6 +466,7 @@
+ config MACH_AT572D940HFEB
+ bool "AT572D940HF-EK"
+ depends on ARCH_AT572D940HF
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
+ help
+ Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
+ <http://www.atmel.com/products/diopsis/default.asp>
+@@ -494,6 +506,24 @@
+ On AT91SAM926x boards both types of NAND flash can be present
+ (8 and 16 bit data bus width).
+
++config MTD_NAND_ATMEL_ROOTFS_SIZE
++ int "Size NAND rootfs in MB"
++ range 8 250
++ depends on MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ default "124"
++ help
++ Many Atmel development boards has a NAND Flash,
++ divided into three partitions.
++ 1) Boot partition (4 MB)
++ 2) Root FS
++ 3) Data partition
++ This allows you to configure the size of the root fs
++ with the remainder ending up in the data partition.
++ The legal values are between 8 and 250
++
++config MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ bool
++
+ # ----------------------------------------------------------
+
+ comment "AT91 Feature Selections"
diff --git a/recipes/linux/linux-2.6.30/at91/linux-2.6.30-002-mach-at91-Kconfig.patch b/recipes/linux/linux-2.6.30/at91/linux-2.6.30-002-mach-at91-Kconfig.patch
new file mode 100644
index 0000000..a2d3965
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91/linux-2.6.30-002-mach-at91-Kconfig.patch
@@ -0,0 +1,196 @@
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/Kconfig linux-2.6.30/arch/arm/mach-at91/Kconfig
+--- linux-2.6.30-0rig/arch/arm/mach-at91/Kconfig 2010-03-14 11:41:36.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/Kconfig 2010-03-14 12:00:27.000000000 +0100
+@@ -97,6 +97,7 @@
+ bool "Atmel AT91RM9200-DK Development board"
+ depends on ARCH_AT91RM9200
+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using Atmel's AT91RM9200-DK Development board.
+ (Discontinued)
+@@ -104,6 +105,7 @@
+ config MACH_AT91RM9200EK
+ bool "Atmel AT91RM9200-EK Evaluation Kit"
+ depends on ARCH_AT91RM9200
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
+@@ -172,6 +174,7 @@
+ config MACH_ECBAT91
+ bool "emQbit ECB_AT91 SBC"
+ depends on ARCH_AT91RM9200
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using emQbit's ECB_AT91 board.
+ <http://wiki.emqbit.com/free-ecb-at91>
+@@ -215,6 +218,8 @@
+ bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
+ depends on ARCH_AT91SAM9260
+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+@@ -229,6 +234,7 @@
+ config MACH_SAM9_L9260
+ bool "Olimex SAM9-L9260 board"
+ depends on ARCH_AT91SAM9260
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
+ <http://www.olimex.com/dev/sam9-L9260.html>
+@@ -281,6 +287,8 @@
+ bool "Atmel AT91SAM9261-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9261
+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+@@ -297,6 +305,8 @@
+ bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9G10
+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+@@ -313,6 +323,8 @@
+ bool "Atmel AT91SAM9263-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9263
+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+@@ -334,6 +346,7 @@
+ config MACH_TOTEMNOVA
+ bool "TotemNova Micronova industrial supervisor"
+ depends on ARCH_AT91SAM9263
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using Micronova's TotemNova industrial supervisor
+ <http://www.micronovasrl.com>
+@@ -341,6 +354,7 @@
+ config MACH_NEOCORE926
+ bool "Adeneo NEOCORE926"
+ depends on ARCH_AT91SAM9263
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using the Adeneo Neocore 926 board.
+
+@@ -371,6 +385,8 @@
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9G20
+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+ that embeds only one SD/MMC slot.
+@@ -379,6 +395,7 @@
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+ depends on ARCH_AT91SAM9G20
+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
+ help
+ Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+ with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+@@ -417,13 +434,23 @@
+ bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+ depends on ARCH_AT91SAM9G45
+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
+ help
+ Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
+ "ES" at the end of the name means that this board is an
+ Engineering Sample.
+
+-endif
++config MACH_AT91SAM9M10G45EK
++ bool "Atmel AT91SAM9M10G45-EK Evaluation Kit"
++ depends on ARCH_AT91SAM9G45
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
++ help
++ Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
++ "ES2" at the end of the name means that this board is an
++ Engineering Sample.
+
++endif
+ # ----------------------------------------------------------
+
+ if ARCH_AT91SAM9M10
+@@ -434,11 +461,22 @@
+ bool "Atmel AT91SAM9M10-EKES Evaluation Kit"
+ depends on ARCH_AT91SAM9M10
+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
+ help
+ Select this if you are using Atmel's AT91SAM9M10-EKES Evaluation Kit.
+ "ES" at the end of the name means that this board is an
+ Engineering Sample.
+
++config MACH_AT91SAM9M10G45EK
++ bool "Atmel AT91SAM9M10G45-EK Evaluation Kit"
++ depends on ARCH_AT91SAM9M10
++ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
++ help
++ Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
++ "ES2" at the end of the name means that this board is an
++ Engineering Sample.
++
+ endif
+
+ # ----------------------------------------------------------
+@@ -451,6 +489,8 @@
+ bool "Atmel AT91CAP9A-DK Evaluation Kit"
+ depends on ARCH_AT91CAP9
+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
+@@ -467,6 +507,8 @@
+ bool "AT572D940HF-EK"
+ depends on ARCH_AT572D940HF
+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
++ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
++ select MTD_ALLOW_DATAFLASHCARD
+ help
+ Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
+ <http://www.atmel.com/products/diopsis/default.asp>
+@@ -495,17 +537,23 @@
+
+ config MTD_AT91_DATAFLASH_CARD
+ bool "Enable DataFlash Card support"
+- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_AT572D940HFEB || MACH_TOTEMNOVA || MACH_NEOCORE926)
++ depends on MTD_ALLOW_DATAFLASHCARD
+ help
+ Enable support for the DataFlash card.
+
++config MTD_ALLOW_DATAFLASHCARD
++ bool
++
+ config MTD_NAND_ATMEL_BUSWIDTH_16
+ bool "Enable 16-bit data bus interface to NAND flash"
+- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK || MACH_AT572D940HFEB)
++ depends on MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
+ help
+ On AT91SAM926x boards both types of NAND flash can be present
+ (8 and 16 bit data bus width).
+
++config MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
++ bool
++
+ config MTD_NAND_ATMEL_ROOTFS_SIZE
+ int "Size NAND rootfs in MB"
+ range 8 250
diff --git a/recipes/linux/linux-2.6.30/at91/linux-2.6.30-003-sam9m10g45ek.patch b/recipes/linux/linux-2.6.30/at91/linux-2.6.30-003-sam9m10g45ek.patch
new file mode 100644
index 0000000..05a81bf
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91/linux-2.6.30-003-sam9m10g45ek.patch
@@ -0,0 +1,29 @@
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9m10g45ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9m10g45ek.c
+--- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9m10g45ek.c 2010-03-14 11:41:36.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/board-sam9m10g45ek.c 2010-03-14 12:07:05.000000000 +0100
+@@ -432,9 +432,13 @@
+
+ #if defined(CONFIG_MACH_AT91SAM9G45EKES)
+ MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+-#else
++#endif
++#if defined(CONFIG_MACH_AT91SAM9M10EKES)
+ MACHINE_START(AT91SAM9M10EKES, "Atmel AT91SAM9M10-EKES")
+ #endif
++#if defined(CONFIG_MACH_AT91SAM9M10G45EK)
++MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
++#endif
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/Makefile linux-2.6.30/arch/arm/mach-at91/Makefile
+--- linux-2.6.30-0rig/arch/arm/mach-at91/Makefile 2010-03-14 11:13:34.000000000 +0100
++++ linux-2.6.30/arch/arm/mach-at91/Makefile 2010-03-14 12:08:01.000000000 +0100
+@@ -74,6 +74,7 @@
+ # AT91SAM9G45 board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+ obj-$(CONFIG_MACH_AT91SAM9M10EKES) += board-sam9m10g45ek.o
++obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
+
+ # AT91CAP9 board-specific support
+ obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
diff --git a/recipes/linux/linux-2.6.30/at91sam9260ek/defconfig b/recipes/linux/linux-2.6.30/at91sam9260ek/defconfig
new file mode 100644
index 0000000..eba23fd
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91sam9260ek/defconfig
@@ -0,0 +1,1492 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sun Mar 14 23:54:27 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9M10 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+CONFIG_MACH_AT91SAM9260EK=y
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_AFEB9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+# CONFIG_MACH_SBC35_A9260 is not set
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+CONFIG_MTD_ALLOW_DATAFLASHCARD=y
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_COMPAT_NET_DEV_OPS is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+CONFIG_MACB_TX_SRAM=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_AR9170_USB=m
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_RFKILL=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=4
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_AT73C213=y
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux-2.6.30/at91sam9261ek/defconfig b/recipes/linux/linux-2.6.30/at91sam9261ek/defconfig
new file mode 100644
index 0000000..44a1a63
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91sam9261ek/defconfig
@@ -0,0 +1,1531 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sun Mar 14 23:54:31 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+CONFIG_ARCH_AT91SAM9261=y
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9M10 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9261 Board Type
+#
+CONFIG_MACH_AT91SAM9261EK=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+CONFIG_MTD_ALLOW_DATAFLASHCARD=y
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_AR9170_USB=m
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_RFKILL=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=4
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D15605 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+CONFIG_FB_INTSRAM=y
+# CONFIG_FB_ATMEL_STN is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_AT73C213=y
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux-2.6.30/at91sam9g10ek/defconfig b/recipes/linux/linux-2.6.30/at91sam9g10ek/defconfig
new file mode 100644
index 0000000..13300eb
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91sam9g10ek/defconfig
@@ -0,0 +1,1528 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sun Mar 14 23:54:35 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9G10=y
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9M10 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G10 Board Type
+#
+CONFIG_MACH_AT91SAM9G10EK=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+CONFIG_MTD_ALLOW_DATAFLASHCARD=y
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_TCLIB is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_AR9170_USB=m
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_RFKILL=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=4
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D15605 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_ATMEL_STN is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_AT73C213=y
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux-2.6.30/at91sam9g20ek/defconfig b/recipes/linux/linux-2.6.30/at91sam9g20ek/defconfig
new file mode 100644
index 0000000..9dda73a
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91sam9g20ek/defconfig
@@ -0,0 +1,1563 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sun Mar 14 23:54:37 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9M10 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+CONFIG_MACH_AT91SAM9G20EK=y
+# CONFIG_MACH_AT91SAM9G20EK_2MMC is not set
+# CONFIG_MACH_USB_A9G20 is not set
+# CONFIG_MACH_QIL_A9G20 is not set
+# CONFIG_MACH_SBC35_A9G20 is not set
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+CONFIG_MTD_ALLOW_DATAFLASHCARD=y
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_AR9170_USB=m
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_RFKILL=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=4
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_ATMEL_SOC=y
+CONFIG_SND_ATMEL_SOC_SSC=y
+CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM8731=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux-2.6.30/at91sam9g20ek_2mmc/defconfig b/recipes/linux/linux-2.6.30/at91sam9g20ek_2mmc/defconfig
new file mode 100644
index 0000000..89e5040
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91sam9g20ek_2mmc/defconfig
@@ -0,0 +1,1561 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sun Mar 14 23:54:39 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9M10 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+# CONFIG_MACH_AT91SAM9G20EK is not set
+CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+# CONFIG_MACH_USB_A9G20 is not set
+# CONFIG_MACH_QIL_A9G20 is not set
+# CONFIG_MACH_SBC35_A9G20 is not set
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_AR9170_USB=m
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_RFKILL=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=4
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_ATMEL_SOC=y
+CONFIG_SND_ATMEL_SOC_SSC=y
+CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM8731=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux-2.6.30/at91sam9g45ek/defconfig b/recipes/linux/linux-2.6.30/at91sam9g45ek/defconfig
new file mode 100644
index 0000000..39c7ef9
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91sam9g45ek/defconfig
@@ -0,0 +1,1651 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sun Mar 14 23:54:40 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+CONFIG_ARCH_AT91SAM9M10=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+CONFIG_MACH_AT91SAM9M10G45EK=y
+
+#
+# AT91SAM9M10 Board Type
+#
+# CONFIG_MACH_AT91SAM9M10EKES is not set
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_ICS932S401 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_AR9170_USB=m
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_RFKILL=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=4
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D15605 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+CONFIG_SND_ATMEL_AC97C=y
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_AT_HDMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux-2.6.30/at91sam9g45ekes/defconfig b/recipes/linux/linux-2.6.30/at91sam9g45ekes/defconfig
new file mode 100644
index 0000000..0ee5d8a
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91sam9g45ekes/defconfig
@@ -0,0 +1,1618 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sun Mar 14 23:54:45 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+CONFIG_ARCH_AT91SAM9G45=y
+# CONFIG_ARCH_AT91SAM9M10 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G45 Board Type
+#
+CONFIG_MACH_AT91SAM9G45EKES=y
+# CONFIG_MACH_AT91SAM9M10G45EK is not set
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_ICS932S401 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_AR9170_USB=m
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_RFKILL=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=4
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D15605 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+CONFIG_SND_ATMEL_AC97C=y
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_AT_HDMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux-2.6.30/at91sam9m10ekes/defconfig b/recipes/linux/linux-2.6.30/at91sam9m10ekes/defconfig
new file mode 100644
index 0000000..d9c8408
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91sam9m10ekes/defconfig
@@ -0,0 +1,1617 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sun Mar 14 23:55:04 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+CONFIG_ARCH_AT91SAM9M10=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+# CONFIG_MACH_AT91SAM9M10G45EK is not set
+
+#
+# AT91SAM9M10 Board Type
+#
+CONFIG_MACH_AT91SAM9M10EKES=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_ICS932S401 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_AR9170_USB=m
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_RFKILL=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=4
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D15605 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+CONFIG_SND_ATMEL_AC97C=y
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_AT_HDMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux-2.6.30/at91sam9rlek/defconfig b/recipes/linux/linux-2.6.30/at91sam9rlek/defconfig
new file mode 100644
index 0000000..f020efe
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91sam9rlek/defconfig
@@ -0,0 +1,1378 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sun Mar 14 23:55:10 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+CONFIG_ARCH_AT91SAM9RL=y
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9M10 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9RL Board Type
+#
+CONFIG_MACH_AT91SAM9RLEK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_COMPAT_NET_DEV_OPS is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=4
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D15605 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_ATMEL_PWM is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+CONFIG_SND_ATMEL_AC97C=y
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91RM9200 is not set
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_AT_HDMAC=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux-2.6.30/at91sam9xeek/defconfig b/recipes/linux/linux-2.6.30/at91sam9xeek/defconfig
new file mode 100644
index 0000000..1e2d918
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/at91sam9xeek/defconfig
@@ -0,0 +1,1492 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sun Mar 14 23:55:33 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9M10 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+CONFIG_MACH_AT91SAM9260EK=y
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_AFEB9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+# CONFIG_MACH_SBC35_A9260 is not set
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+CONFIG_MTD_ALLOW_DATAFLASHCARD=y
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH=y
+CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE=124
+CONFIG_MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE=y
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_AT91_SLOW_CLOCK is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_COMPAT_NET_DEV_OPS is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+CONFIG_MACB_TX_SRAM=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_AR9170_USB=m
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_RFKILL=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=4
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_AT73C213=y
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux_2.6.30.bb b/recipes/linux/linux_2.6.30.bb
index 2c34314..e521cbc 100644
--- a/recipes/linux/linux_2.6.30.bb
+++ b/recipes/linux/linux_2.6.30.bb
@@ -1,6 +1,6 @@
require linux.inc
-PR = "r5"
+PR = "r6"
S = "${WORKDIR}/linux-${PV}"
@@ -10,6 +10,12 @@ DEFAULT_PREFERENCE_mpc8315e-rdb = "1"
DEFAULT_PREFERENCE_calamari = "1"
DEFAULT_PREFERENCE_mx27ads = "1"
DEFAULT_PREFERENCE_kixrp435 = "1"
+DEFAULT_PREFERENCE_at91sam9g45ekes = "2"
+DEFAULT_PREFERENCE_at91sam9g45ek = "2"
+DEFAULT_PREFERENCE_at91sam9m10ekes = "2"
+DEFAULT_PREFERENCE_at91sam9m10g45ek = "2"
+DEFAULT_PREFERENCE_at91sam9g10ek = "2"
+DEFAULT_PREFERENCE_at91sam9g20ek = "2"
# machine boots with it, works but was not tested too much
DEFAULT_PREFERENCE_at91sam9263ek = "-1"
@@ -17,14 +23,21 @@ DEFAULT_PREFERENCE_tosa = "-1"
SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${PV}.10.bz2;apply=yes;name=stablepatch \
- http://maxim.org.za/AT91RM9200/2.6/2.6.30-at91.patch.gz;name=at91patch \
file://aufs2-30.patch \
file://defconfig"
-SRC_URI_append_mpc8315e-rdb = " file://mpc8315erdb-add-msi-to-dts.patch"
+SRC_URI_at91 = " \
+ ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
+ http://maxim.org.za/AT91RM9200/2.6/2.6.30-at91.patch.gz;apply=yes;name=at91patch \
+ ftp://www.at91.com/pub/buildroot/2.6.30-exp.2.patch.bz2;apply=yes;name=at91exp2 \
+ file://at91/linux-2.6.30-001-configurable-partition-size.patch.patch \
+ file://at91/linux-2.6.30-002-mach-at91-Kconfig.patch \
+ file://at91/linux-2.6.30-003-sam9m10g45ek.patch \
+ file://defconfig"
-SRC_URI_append_at91sam9263ek = " file://hrw-linux-2.6.30-exp.patch "
+SRC_URI_append_mpc8315e-rdb = " file://mpc8315erdb-add-msi-to-dts.patch"
+# SRC_URI_append_at91sam9263ek = " file://hrw-linux-2.6.30-exp.patch "
SRC_URI[kernel.md5sum] = "7a80058a6382e5108cdb5554d1609615"
SRC_URI[kernel.sha256sum] = "d7b9f19b92fd5c693c16cd62f441d051b699f28ec6a175d1b464e58bacd8c78f"
@@ -33,3 +46,7 @@ SRC_URI[stablepatch.md5sum] = "6485fe0cf0f0220493647505bfd2f7b0"
SRC_URI[stablepatch.sha256sum] = "a1ffb806d7d0083aa8d0525cbccede4172f4a44c8df1ddfeece629b6d8304201"
SRC_URI[at91patch.md5sum] = "f13ab353b11329ce3d605b6f40e77fa6"
SRC_URI[at91patch.sha256sum] = "41991e8aa2e5fe8e5dfd47b1e5c446fa03c3ee96a5eae54fd6ec15d1d9afef30"
+SRC_URI[at91exp2.md5sum] = "770c7a2bfb925111a8c0e0d4c8c4764e"
+SRC_URI[at91exp2.sha256sum] = "58894965b253eae0c4caacedc3463cf186c18431ca0d71b767a3b36aa40ec388"
+
+
--
1.6.3.3
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 3/5] Add u-boot-2009.11 support for AT91SAM9
2010-10-16 12:50 ` [PATCH 2/5] Add AT91SAM9 linux-2.6.30 from www.linux4sam.org ulf.samuelsson
@ 2010-10-16 12:50 ` ulf.samuelsson
2010-10-16 12:50 ` [PATCH 4/5] Add X-Windows support for AT91 LCD controller ulf.samuelsson
0 siblings, 1 reply; 33+ messages in thread
From: ulf.samuelsson @ 2010-10-16 12:50 UTC (permalink / raw)
To: openembedded-devel; +Cc: Ulf Samuelsson
From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
Add support for dataflash for SAM9G45/M10
Add support for SD-Card
Add mmc/mux command
Workaround for problem with UBOOT_VERSION beeing overwritten
Add CRC for dataflash environment
Add generic function for adding debug variables
Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
---
...port-running-ATSAM9G45-M10-from-dataflash.patch | 117 +++
...-SAM9M10-G45-config-for-dataflash-support.patch | 110 +++
...rt-selecting-SPI-mode-in-dataflash-driver.patch | 116 +++
...replace-verbose-dataflash_mmc_mux-command.patch | 28 +
...ibarm-board.c-Gets-overwritten-workaround.patch | 34 +
.../0007-fat.c-Add-DEBUG-currently-disabled.patch | 26 +
...0008-env_dataflash.c-More-robust-handling.patch | 148 ++++
...g.c-Add-a-generic-function-for-debug-vars.patch | 168 +++++
| 60 ++
...-common-Makefile-Add-cmd_debug.c-to-build.patch | 27 +
...mci.c-Support-writing-out-AT91-mci-config.patch | 100 +++
...taflash.c-Status-printout-depend-on-DEBUG.patch | 59 ++
.../0014-AT91-MCI-Add-support-for-SD-Card.patch | 740 ++++++++++++++++++++
.../0015-sam9m10g45ek-Add-configuration-file.patch | 113 +++
recipes/u-boot/u-boot_2009.11.bb | 44 ++
15 files changed, 1890 insertions(+), 0 deletions(-)
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0002-Support-running-ATSAM9G45-M10-from-dataflash.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0003-Update-SAM9M10-G45-config-for-dataflash-support.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0004-Support-selecting-SPI-mode-in-dataflash-driver.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0005-mux-replace-verbose-dataflash_mmc_mux-command.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0006-libarm-board.c-Gets-overwritten-workaround.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0007-fat.c-Add-DEBUG-currently-disabled.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0008-env_dataflash.c-More-robust-handling.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0009-cmd_debug.c-Add-a-generic-function-for-debug-vars.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0010-debug.h-Add-header-for-debug-variables.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0011-common-Makefile-Add-cmd_debug.c-to-build.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0012-cmd_mci.c-Support-writing-out-AT91-mci-config.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0013-atmel_dataflash.c-Status-printout-depend-on-DEBUG.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0014-AT91-MCI-Add-support-for-SD-Card.patch
create mode 100644 recipes/u-boot/u-boot-2009.11/at91/0015-sam9m10g45ek-Add-configuration-file.patch
create mode 100644 recipes/u-boot/u-boot_2009.11.bb
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0002-Support-running-ATSAM9G45-M10-from-dataflash.patch b/recipes/u-boot/u-boot-2009.11/at91/0002-Support-running-ATSAM9G45-M10-from-dataflash.patch
new file mode 100644
index 0000000..4880d67
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0002-Support-running-ATSAM9G45-M10-from-dataflash.patch
@@ -0,0 +1,117 @@
+From 05c663921ff0fab52cafd2ff23848fa4bfabc5ec Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf@grond.atmel.com>
+Date: Sat, 27 Feb 2010 08:58:44 +0100
+Subject: [PATCH] Support running ATSAM9G45/M10 from dataflash
+
+The current at91sam9g45 targets can build for dataflash
+but the target will still use NAND flash for the environment.
+
+This patch will add the first hooks to allow use of dataflash.
+The end result will use dataflash, but there are bit errors
+during transmission, so the CRC check will always fail.
+This will be fixed by later patches.
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ Makefile | 2 +-
+ board/atmel/at91sam9m10g45ek/Makefile | 1 +
+ board/atmel/at91sam9m10g45ek/partition.c | 40 +++++++++++++++++++++++++++
+ cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 3 +-
+ 4 files changed, 43 insertions(+), 3 deletions(-)
+ create mode 100644 board/atmel/at91sam9m10g45ek/partition.c
+
+diff --git a/Makefile b/Makefile
+index f06a97c..0bfa61c 100644
+--- a/Makefile
++++ b/Makefile
+@@ -2876,7 +2876,7 @@ at91sam9g45ekes_config : unconfig
+ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ else \
+- echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \
++ echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ fi;
+ @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
+diff --git a/board/atmel/at91sam9m10g45ek/Makefile b/board/atmel/at91sam9m10g45ek/Makefile
+index 4caf1e4..914cc1a 100644
+--- a/board/atmel/at91sam9m10g45ek/Makefile
++++ b/board/atmel/at91sam9m10g45ek/Makefile
+@@ -31,6 +31,7 @@ LIB = $(obj)lib$(BOARD).a
+
+ COBJS-y += at91sam9m10g45ek.o
+ COBJS-y += led.o
++COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
+
+ SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+ OBJS := $(addprefix $(obj),$(COBJS-y))
+diff --git a/board/atmel/at91sam9m10g45ek/partition.c b/board/atmel/at91sam9m10g45ek/partition.c
+new file mode 100644
+index 0000000..2629c67
+--- /dev/null
++++ b/board/atmel/at91sam9m10g45ek/partition.c
+@@ -0,0 +1,40 @@
++/*
++ * (C) Copyright 2008
++ * Ulf Samuelsson <ulf@atmel.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++#include <common.h>
++#include <config.h>
++#include <asm/hardware.h>
++#include <dataflash.h>
++
++AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
++
++struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
++ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
++ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
++};
++
++/*define the area offsets*/
++dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
++ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
++ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
++ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
++ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
++ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
++};
+diff --git a/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
+index 98d90f2..07717ea 100644
+--- a/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
++++ b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
+@@ -75,7 +75,6 @@ void at91_serial_hw_init(void)
+ #endif
+ }
+
+-#ifdef CONFIG_ATMEL_SPI
+ void at91_spi0_hw_init(unsigned long cs_mask)
+ {
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */
+@@ -146,7 +145,7 @@ void at91_spi1_hw_init(unsigned long cs_mask)
+ }
+
+ }
+-#endif
++
+
+ #ifdef CONFIG_MACB
+ void at91_macb_hw_init(void)
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0003-Update-SAM9M10-G45-config-for-dataflash-support.patch b/recipes/u-boot/u-boot-2009.11/at91/0003-Update-SAM9M10-G45-config-for-dataflash-support.patch
new file mode 100644
index 0000000..4b99c31
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0003-Update-SAM9M10-G45-config-for-dataflash-support.patch
@@ -0,0 +1,110 @@
+From 238b17ddabab0f0452c4acdf2a52e4e41ddfc3c3 Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sat, 27 Feb 2010 09:09:54 +0100
+Subject: [PATCH] Update SAM9M10/G45 config for dataflash support
+
+Signed-off-by Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ include/configs/at91sam9m10g45ek.h | 36 +++++++++++++++++++++++++++---------
+ 1 files changed, 27 insertions(+), 9 deletions(-)
+
+diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
+index b460188..a60bb6b 100644
+--- a/include/configs/at91sam9m10g45ek.h
++++ b/include/configs/at91sam9m10g45ek.h
+@@ -3,7 +3,7 @@
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+- * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
++ * Configuration settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+@@ -44,8 +44,10 @@
+ #define CONFIG_SETUP_MEMORY_TAGS 1
+ #define CONFIG_INITRD_TAG 1
+
++#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
+ #define CONFIG_SKIP_LOWLEVEL_INIT
+ #define CONFIG_SKIP_RELOCATE_UBOOT
++#endif
+
+ /*
+ * Hardware drivers
+@@ -93,8 +95,8 @@
+ #undef CONFIG_CMD_FPGA
+ #undef CONFIG_CMD_IMI
+ #undef CONFIG_CMD_IMLS
+-#undef CONFIG_CMD_AUTOSCRIPT
+ #undef CONFIG_CMD_LOADS
++#undef CONFIG_CMD_SOURCE
+
+ #define CONFIG_CMD_PING 1
+ #define CONFIG_CMD_DHCP 1
+@@ -112,22 +114,37 @@
+ #define CONFIG_CMD_SPI
+ #define CONFIG_SPI_FLASH 1
+ #define CONFIG_SPI_FLASH_ATMEL 1
+-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
+ #endif
+
++#define CONFIG_ATMEL_DATAFLASH_SPI
++#define CONFIG_HAS_DATAFLASH 1
++#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
++#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
++#define AT91_SPI_CLK 15000000
++#define DATAFLASH_TCSS (0x1a << 16)
++#define DATAFLASH_TCHS (0x1 << 24)
++
++
+ /* NOR flash, if populated */
+ #ifndef CONFIG_CMD_NAND
+ #define CONFIG_SYS_NO_FLASH 1
+ #define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+-#else
++#endif
++
++#ifdef CONFIG_SYS_USE_NORFLASH
+ #define CONFIG_SYS_FLASH_CFI 1
+ #define CONFIG_FLASH_CFI_DRIVER 1
+ #define PHYS_FLASH_1 0x10000000
+ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+ #define CONFIG_SYS_MAX_FLASH_SECT 256
+ #define CONFIG_SYS_MAX_FLASH_BANKS 1
++#else
++#define CONFIG_SYS_NO_FLASH 1
+ #endif
+
++
+ /* NAND flash */
+ #ifdef CONFIG_CMD_NAND
+ #define CONFIG_NAND_MAX_CHIPS 1
+@@ -170,16 +187,17 @@
+ #ifdef CONFIG_SYS_USE_DATAFLASH
+
+ /* bootstrap + u-boot + env + linux in dataflash on CS0 */
+-#define CONFIG_ENV_IS_IN_SPI_FLASH 1
++#define CONFIG_ENV_IS_IN_DATAFLASH 1
++/* #define CONFIG_ENV_IS_IN_SPI_FLASH 1 */
+ #define CONFIG_SYS_MONITOR_BASE (0xC0000000 + 0x8400)
+ #define CONFIG_ENV_OFFSET 0x4200
+ #define CONFIG_ENV_ADDR (0xC0000000 + CONFIG_ENV_OFFSET)
+ #define CONFIG_ENV_SIZE 0x4200
+-#define CONFIG_ENV_SECT_SIZE 0x10000
+-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
++#define CONFIG_ENV_SECT_SIZE 0x4200
++#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x72000000 0x290000; bootm 0x72000000"
+ #define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+- "root=/dev/mtdblock0 " \
+- "mtdparts=atmel_nand:-(root) "\
++ "root=/dev/mtdblock1 " \
++ "mtdparts=atmel_nand:4M(unused)ro,-(root) "\
+ "rw rootfstype=jffs2"
+
+ #else /* CONFIG_SYS_USE_NANDFLASH */
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0004-Support-selecting-SPI-mode-in-dataflash-driver.patch b/recipes/u-boot/u-boot-2009.11/at91/0004-Support-selecting-SPI-mode-in-dataflash-driver.patch
new file mode 100644
index 0000000..ec075d8
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0004-Support-selecting-SPI-mode-in-dataflash-driver.patch
@@ -0,0 +1,116 @@
+From 33f977f42bfb2f62dff2b2441c06eb5265c61293 Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sat, 27 Feb 2010 09:49:43 +0100
+Subject: [PATCH] Support selecting SPI mode in dataflash driver
+
+By setting AT91_SPI_MODE in the config to
+AT91_SPI_MODE[3..0] you can select the SPI mode.
+when the dataflash driver is used.
+
+I.E
+.#define AT91_SPI_MODE AT91_SPI_MODE0
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ drivers/spi/atmel_dataflash_spi.c | 26 ++++++++++++++++++++++----
+ include/asm-arm/arch-at91/at91_spi.h | 8 ++++++++
+ 2 files changed, 30 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/spi/atmel_dataflash_spi.c b/drivers/spi/atmel_dataflash_spi.c
+index 3a648e6..5307e34 100644
+--- a/drivers/spi/atmel_dataflash_spi.c
++++ b/drivers/spi/atmel_dataflash_spi.c
+@@ -34,8 +34,15 @@
+ #define AT91_SPI_PCS2_DATAFLASH_CARD 0xB /* Chip Select 2: NPCS2%1011 */
+ #define AT91_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */
+
++#ifndef AT91_SPI_MODE
++#define AT91_SPI_MODE AT91_SPI_MODE0
++#endif
++
+ void AT91F_SpiInit(void)
+ {
++ unsigned int mr,sr,imr;
++ unsigned int csr0, csr1, csr2, csr3;
++
+ /* Reset the SPI */
+ writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR);
+
+@@ -44,7 +51,7 @@ void AT91F_SpiInit(void)
+ AT91_BASE_SPI + AT91_SPI_MR);
+
+ /* Configure CS0 */
+- writel(AT91_SPI_NCPHA |
++ writel(AT91_SPI_MODE |
+ (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
+ (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
+ ((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
+@@ -52,7 +59,7 @@ void AT91F_SpiInit(void)
+
+ #ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1
+ /* Configure CS1 */
+- writel(AT91_SPI_NCPHA |
++ writel(AT91_SPI_MODE |
+ (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
+ (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
+ ((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
+@@ -60,7 +67,7 @@ void AT91F_SpiInit(void)
+ #endif
+ #ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS2
+ /* Configure CS2 */
+- writel(AT91_SPI_NCPHA |
++ writel(AT91_SPI_MODE |
+ (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
+ (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
+ ((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
+@@ -68,7 +75,7 @@ void AT91F_SpiInit(void)
+ #endif
+ #ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3
+ /* Configure CS3 */
+- writel(AT91_SPI_NCPHA |
++ writel(AT91_SPI_MODE |
+ (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
+ (AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
+ ((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
+@@ -84,7 +91,18 @@ void AT91F_SpiInit(void)
+ * Add tempo to get SPI in a safe state.
+ * Should not be needed for new silicon (Rev B)
+ */
++ printf("CPU running at %d Hz\n",get_cpu_clk_rate());
++ printf("MCK running at %d Hz\n",get_mck_clk_rate());
++ printf("SPI_MR 0x%08x\n",mr=readl(AT91_BASE_SPI + AT91_SPI_MR));
++ printf("SPI_SR 0x%08x\n",sr=readl(AT91_BASE_SPI + AT91_SPI_SR));
++ printf("SPI_IMR 0x%08x\n",imr=readl(AT91_BASE_SPI + AT91_SPI_IMR));
++ printf("SPI_CSR0 0x%08x\n",csr0=readl(AT91_BASE_SPI + AT91_SPI_CSR(0)));
++ printf("SPI_CSR1 0x%08x\n",csr1=readl(AT91_BASE_SPI + AT91_SPI_CSR(1)));
++ printf("SPI_CSR2 0x%08x\n",csr2=readl(AT91_BASE_SPI + AT91_SPI_CSR(2)));
++ printf("SPI_CSR3 0x%08x\n",csr3=readl(AT91_BASE_SPI + AT91_SPI_CSR(3)));
++ printf("SPI SPEED = %d Hz\n", get_mck_clk_rate()/ ((csr0 >> 8) & 0xff));
+ udelay(500000);
++
+ readl(AT91_BASE_SPI + AT91_SPI_SR);
+ readl(AT91_BASE_SPI + AT91_SPI_RDR);
+
+diff --git a/include/asm-arm/arch-at91/at91_spi.h b/include/asm-arm/arch-at91/at91_spi.h
+index 30643c6..8924996 100644
+--- a/include/asm-arm/arch-at91/at91_spi.h
++++ b/include/asm-arm/arch-at91/at91_spi.h
+@@ -62,7 +62,15 @@
+
+ #define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */
+ #define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */
++#define AT91_SPI_NCPOL (0 << 0) /* Clock Polarity */
+ #define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */
++#define AT91_SPI_CPHA (0 << 1) /* Clock Phase */
++
++#define AT91_SPI_MODE0 (AT91_SPI_NCPOL | AT91_SPI_NCPHA)
++#define AT91_SPI_MODE1 (AT91_SPI_NCPOL | AT91_SPI_CPHA)
++#define AT91_SPI_MODE2 (AT91_SPI_CPOL | AT91_SPI_NCPHA)
++#define AT91_SPI_MODE3 (AT91_SPI_CPOL | AT91_SPI_CPHA)
++
+ #define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */
+ #define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */
+ #define AT91_SPI_BITS_8 (0 << 4)
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0005-mux-replace-verbose-dataflash_mmc_mux-command.patch b/recipes/u-boot/u-boot-2009.11/at91/0005-mux-replace-verbose-dataflash_mmc_mux-command.patch
new file mode 100644
index 0000000..35bee58
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0005-mux-replace-verbose-dataflash_mmc_mux-command.patch
@@ -0,0 +1,28 @@
+From 600ddf4971206a6c653c23ddbce48253f1e07dd2 Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sat, 13 Mar 2010 13:25:26 +0100
+Subject: [PATCH] mux: replace verbose dataflash_mmc_mux command
+
+Replace verbose 17 character command with the original thing
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ common/cmd_dataflash_mmc_mux.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/common/cmd_dataflash_mmc_mux.c b/common/cmd_dataflash_mmc_mux.c
+index 97e303e..2fc67d4 100644
+--- a/common/cmd_dataflash_mmc_mux.c
++++ b/common/cmd_dataflash_mmc_mux.c
+@@ -59,7 +59,7 @@ static int mmc_nspi (const char *s)
+
+ U_BOOT_CMD(
+ dataflash_mmc_mux, 2, 1, do_dataflash_mmc_mux,
+- "dataflash_mmc_mux\t- enable or disable MMC or SPI\n",
++ "mux\t- enable or disable MMC or SPI\n",
+ "[mmc, spi]\n"
+ " - enable or disable MMC or SPI"
+ );
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0006-libarm-board.c-Gets-overwritten-workaround.patch b/recipes/u-boot/u-boot-2009.11/at91/0006-libarm-board.c-Gets-overwritten-workaround.patch
new file mode 100644
index 0000000..4463fc2
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0006-libarm-board.c-Gets-overwritten-workaround.patch
@@ -0,0 +1,34 @@
+From 1c72f37cbea8c1bb98d438108558a4e222c5ce2b Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sat, 13 Mar 2010 13:29:34 +0100
+Subject: [PATCH] libarm/board.c: Gets overwritten - workaround!
+
+U_BOOT_VERSION gets overwritten by something.
+Workaround, but no fix for the problem, by
+adding another variable which can get overwritten
+without problems.
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ lib_arm/board.c | 5 +++--
+ 1 files changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/lib_arm/board.c b/lib_arm/board.c
+index e148739..379e39b 100644
+--- a/lib_arm/board.c
++++ b/lib_arm/board.c
+@@ -74,8 +74,9 @@ extern void dataflash_print_info(void);
+ #define CONFIG_IDENT_STRING ""
+ #endif
+
+-const char version_string[] =
+- U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")"CONFIG_IDENT_STRING;
++const char dummy[] = "Is this overwritten ?";
++const char version_string[] =
++ U_BOOT_VERSION " (" U_BOOT_DATE " - " U_BOOT_TIME ")"CONFIG_IDENT_STRING;
+
+ #ifdef CONFIG_DRIVER_RTL8019
+ extern void rtl8019_get_enetaddr (uchar * addr);
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0007-fat.c-Add-DEBUG-currently-disabled.patch b/recipes/u-boot/u-boot-2009.11/at91/0007-fat.c-Add-DEBUG-currently-disabled.patch
new file mode 100644
index 0000000..6a2fdb4
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0007-fat.c-Add-DEBUG-currently-disabled.patch
@@ -0,0 +1,26 @@
+From db9c87b27153d55cd1818d2f1a2772b8070b3715 Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sat, 13 Mar 2010 13:32:40 +0100
+Subject: [PATCH] fat.c: Add DEBUG (currently disabled)
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ fs/fat/fat.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/fs/fat/fat.c b/fs/fat/fat.c
+index 2445f1e..87e7f08 100644
+--- a/fs/fat/fat.c
++++ b/fs/fat/fat.c
+@@ -24,7 +24,7 @@
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+-
++//#define DEBUG
+ #include <common.h>
+ #include <config.h>
+ #include <fat.h>
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0008-env_dataflash.c-More-robust-handling.patch b/recipes/u-boot/u-boot-2009.11/at91/0008-env_dataflash.c-More-robust-handling.patch
new file mode 100644
index 0000000..7c38c0c
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0008-env_dataflash.c-More-robust-handling.patch
@@ -0,0 +1,148 @@
+From 50edf2024c826048652f29a350887946fba4a509 Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sat, 13 Mar 2010 23:56:39 +0100
+Subject: [PATCH] env_dataflash.c: More robust handling.
+
+1: When u-boot environment is in dataflash, it is safe to
+ assume that this is the boot flash.
+ We can then assume we are already reloacted to DRAM
+ and have plenty of memory.
+ No need to split reads into inefficient small chunks
+2: Reread memory on CRC error
+3: Validate writes to environment, and repeat.
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ common/env_dataflash.c | 85 +++++++++++++++++++++++++++++++----------------
+ 1 files changed, 56 insertions(+), 29 deletions(-)
+
+diff --git a/common/env_dataflash.c b/common/env_dataflash.c
+index 27a3bbc..a394baa 100644
+--- a/common/env_dataflash.c
++++ b/common/env_dataflash.c
+@@ -23,11 +23,18 @@
+ #include <linux/stddef.h>
+ #include <dataflash.h>
+
++#ifdef DEBUG
++#define pr_debug(fmt, args...) printf(fmt, ##args)
++#else
++#define pr_debug(...) do { } while(0)
++#endif
++
+ DECLARE_GLOBAL_DATA_PTR;
+
+ env_t *env_ptr = NULL;
+
+ char * env_name_spec = "dataflash";
++static env_t buf;
+
+ extern int read_dataflash (unsigned long addr, unsigned long size, char
+ *result);
+@@ -45,54 +52,74 @@ uchar env_get_char_spec (int index)
+ return (c);
+ }
+
++
+ void env_relocate_spec (void)
+ {
+- read_dataflash(CONFIG_ENV_ADDR, CONFIG_ENV_SIZE, (char *)env_ptr);
++ ulong new;
++ ulong i;
++ for(i = 0; i < 320; i++) {
++ read_dataflash(CONFIG_ENV_ADDR,sizeof(env_t), (char *)&buf);
++ new = crc32 (0, buf.data, sizeof(buf.data));
++ pr_debug("Stored CRC=[0x%08x], Read CRC=[0x%08x]\r\n",buf.crc,new);
++ if(new == buf.crc) {
++ pr_debug ("*** CRC in dataflash valid\n\n");
++ gd->env_addr = offsetof(env_t,data);
++ gd->env_valid = 1;
++ env_ptr = &buf;
++ return;
++ }
++ }
+ }
+
+ int saveenv(void)
+ {
+ /* env must be copied to do not alter env structure in memory*/
++ int error;
++ int i;
+ unsigned char temp[CONFIG_ENV_SIZE];
+- memcpy(temp, env_ptr, CONFIG_ENV_SIZE);
+- return write_dataflash(CONFIG_ENV_ADDR, (unsigned long)temp, CONFIG_ENV_SIZE);
++
++ for(i = 0; i < 4; i++) {
++ memcpy(temp, env_ptr, CONFIG_ENV_SIZE);
++ error = write_dataflash(CONFIG_ENV_ADDR, (unsigned long)temp, CONFIG_ENV_SIZE);
++ read_dataflash(CONFIG_ENV_ADDR,sizeof(env_t), (char *)&temp);
++ if (memcmp(env_ptr,temp,CONFIG_ENV_SIZE) == 0) return error;
++ pr_debug("Dataflash environment verify failed, retrying...\n");
++ }
++ pr_debug("Dataflash environment verify failed, aborting...\n");
++ return error;
+ }
+
+ /************************************************************************
+ * Initialize Environment use
+- *
+- * We are still running from ROM, so data use is limited
+- * Use a (moderately small) buffer on the stack
++ * When environment is in dataflash, it is OK to assume that we
++ * are booting from dataflash, and then u-boot is always executing
++ * from DRAM. Use a large buffer for faster/easier use
+ */
+ int env_init(void)
+ {
+- ulong crc, len, new;
+- unsigned off;
+- uchar buf[64];
++ unsigned int crc, new;
++ int i;
+ if (gd->env_valid == 0){
+ AT91F_DataflashInit(); /* prepare for DATAFLASH read/write */
++ for(i = 0; i < 24; i++) {
++ read_dataflash(CONFIG_ENV_ADDR,sizeof(env_t), (char *)&buf);
++ new = crc32 (0, buf.data, sizeof(buf.data));
++ pr_debug("Stored CRC=[0x%08x], Read CRC=[0x%08x]\r\n",buf.crc,new);
++ if(new == buf.crc) {
++ pr_debug ("*** CRC in dataflash valid\n");
++ gd->env_addr = offsetof(env_t,data);
++ gd->env_valid = 1;
++ return 0;
+
+- /* read old CRC */
+- read_dataflash(CONFIG_ENV_ADDR + offsetof(env_t, crc),
+- sizeof(ulong), (char *)&crc);
+- new = 0;
+- len = ENV_SIZE;
+- off = offsetof(env_t,data);
+- while (len > 0) {
+- int n = (len > sizeof(buf)) ? sizeof(buf) : len;
+- read_dataflash(CONFIG_ENV_ADDR + off, n, (char *)buf);
+- new = crc32 (new, buf, n);
+- len -= n;
+- off += n;
+- }
+- if (crc == new) {
+- gd->env_addr = offsetof(env_t,data);
+- gd->env_valid = 1;
+- } else {
+- gd->env_addr = (ulong)&default_environment[0];
+- gd->env_valid = 0;
++ }
+ }
++ pr_debug("*** CRC in dataflash not valid\n\n");
++ pr_debug("Stored CRC=[0x%08x], Read CRC=[0x%08x]\r\n",crc,new);
++ pr_debug("Buffer = [0x%08x]\n\n\r", (unsigned int) &buf);
++ pr_debug("Default = [0x%08x]\n\n\r", (unsigned int) default_environment);
++ pr_debug("Environment = [0x%08x]\n\n\r", (unsigned int) env_ptr);
++ gd->env_addr = (ulong)&default_environment[0];
++ gd->env_valid = 0;
+ }
+-
+ return (0);
+ }
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0009-cmd_debug.c-Add-a-generic-function-for-debug-vars.patch b/recipes/u-boot/u-boot-2009.11/at91/0009-cmd_debug.c-Add-a-generic-function-for-debug-vars.patch
new file mode 100644
index 0000000..34828eb
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0009-cmd_debug.c-Add-a-generic-function-for-debug-vars.patch
@@ -0,0 +1,168 @@
+From f96a5c1051eac6c5782d775a97f9651c5e10b7af Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sun, 14 Mar 2010 00:03:14 +0100
+Subject: [PATCH] cmd_debug.c: Add a generic function for debug vars
+
+This introduces a way for a module to register a debug variable.
+The debug command can then be used to turn on/off the debug
+variable or set it to a level
+* 0 (off)
+* 1 (on)
+* 2 (verbose)
+
+The value of all debug variables can be listed by just typing "debug"
+
+module will use the debug level for its debug variable
+to determine debug verbosity.
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ common/cmd_debug.c | 136 ++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 136 insertions(+), 0 deletions(-)
+ create mode 100644 common/cmd_debug.c
+
+diff --git a/common/cmd_debug.c b/common/cmd_debug.c
+new file mode 100644
+index 0000000..99f05a2
+--- /dev/null
++++ b/common/cmd_debug.c
+@@ -0,0 +1,136 @@
++/*
++ * (C) Copyright 2010
++ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <command.h>
++#include <debug.h>
++
++#undef DEBUG
++#if defined(DEBUG)
++#define pr_debug(fmt, args...) printf(fmt, ##args)
++#else
++#define pr_debug(...) do { } while(0)
++#endif
++
++static struct debug_flag debug = {
++ .debug = 0,
++ .name = "all",
++ .next = NULL,
++};
++struct debug_flag *dbg_vars = &debug;
++
++static char *debug_variable (const char *s)
++{
++ struct debug_flag *vars;
++ vars = dbg_vars;
++ while(vars != NULL) {
++ if (strcmp (s, vars->name) == 0) {
++ return &vars->debug;
++ }
++ vars = vars->next;
++ }
++ return NULL;
++}
++
++static int debug_level (const char *s)
++{
++ if (strcmp (s, "0") == 0) {
++ return 0;
++ } else if (strcmp (s, "off") == 0) {
++ return 0;
++ } else if (strcmp (s, "1") == 0) {
++ return 1;
++ } else if (strcmp (s, "on") == 0) {
++ return 1;
++ } else if (strcmp (s, "2") == 0) {
++ return 2;
++ } else {
++ return -1;
++ }
++}
++
++int do_debug (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++{
++ int value;
++ char *p;
++ struct debug_flag *dbg;
++ pr_debug("Arg count = %d\n",argc);
++ for (value = 0; value < argc; value++) {
++ pr_debug("argv[%d] = \"%s\"\n",value,argv[value]);
++ }
++ value = 1; /* Standard value, if we do not have a second parameter */
++ switch (argc) {
++ case 3: /* on / off */
++ value = debug_level(argv[2]);
++ if(value < 0) {
++ printf("Illegal debug variable: %s\n",p);
++ return -1;
++ }
++
++ case 2:
++ p = debug_variable (argv[1]);
++ if(p == NULL) {
++ printf("Illegal debug variable: %s\n",p);
++ return -1;
++ }
++ if(p == &debug.debug) { /* Set all debug variables */
++ dbg = dbg_vars;
++ while(dbg != NULL) {
++ dbg->debug = value;
++ dbg = dbg->next;
++ }
++ }
++ *p = value;
++ break;
++ default:
++ printf ("Usage:\n%s\n", cmdtp->usage);
++ printf ("Valid are: \n");
++ dbg = dbg_vars;
++ while(dbg != NULL) {
++ printf("\t%s\t = %d\n",dbg->name, dbg->debug);
++ dbg = dbg->next;
++ }
++ return 1;
++ }
++ return 0;
++}
++
++void register_debug_variable(struct debug_flag *dbg)
++{
++ struct debug_flag *vars;
++ vars = dbg_vars;
++ pr_debug("Registering \"%s_debug\" = %d\n",dbg->name,dbg->debug);
++ while(vars->next != NULL) {
++ vars = vars->next;
++ }
++ vars->next = dbg;
++ dbg->next = NULL;
++}
++
++
++U_BOOT_CMD(
++ debug, 3, 1, do_debug,
++ "debug\t- enable or disable debug\n",
++ "<var> [on|off|0|1|2]\n"
++ " - enable or disable debug"
++);
+--
+1.6.0.2
+
--git a/recipes/u-boot/u-boot-2009.11/at91/0010-debug.h-Add-header-for-debug-variables.patch b/recipes/u-boot/u-boot-2009.11/at91/0010-debug.h-Add-header-for-debug-variables.patch
new file mode 100644
index 0000000..0cdf4e8
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0010-debug.h-Add-header-for-debug-variables.patch
@@ -0,0 +1,60 @@
+From 13e1209feb63e1fd624fbb5a691dc4320f576cc8 Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sun, 14 Mar 2010 00:08:59 +0100
+Subject: [PATCH] debug.h: Add header for debug variables
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ include/debug.h | 40 ++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 40 insertions(+), 0 deletions(-)
+ create mode 100644 include/debug.h
+
+diff --git a/include/debug.h b/include/debug.h
+new file mode 100644
+index 0000000..5d72460
+--- /dev/null
++++ b/include/debug.h
+@@ -0,0 +1,40 @@
++/*
++ * Copyright (c) 2010
++ * Ulf Samuelsson. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in the
++ * documentation and/or other materials provided with the distribution.
++ * 3. The name of the author may not be used to endorse or promote products
++ * derived from this software without specific prior written permission
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
++ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
++ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++#ifndef __DEBUG_H__
++#define __DEBUG_H__
++
++struct debug_flag;
++
++struct debug_flag {
++ char debug;
++ char name[11];
++ struct debug_flag *next;
++};
++
++void register_debug_variable(struct debug_flag *dbg);
++
++#endif /* __DEBUG_H__ */
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0011-common-Makefile-Add-cmd_debug.c-to-build.patch b/recipes/u-boot/u-boot-2009.11/at91/0011-common-Makefile-Add-cmd_debug.c-to-build.patch
new file mode 100644
index 0000000..a4b3a9b
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0011-common-Makefile-Add-cmd_debug.c-to-build.patch
@@ -0,0 +1,27 @@
+From 81c5954a3932d46de7db92c7314060a491e20063 Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sun, 14 Mar 2010 00:12:35 +0100
+Subject: [PATCH] common/Makefile: Add cmd_debug.c to build
+
+Ensure cmd_debug.c is built if CONFIG_CMD_DEBUG is set
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ common/Makefile | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/common/Makefile b/common/Makefile
+index 47f6a71..a827be8 100644
+--- a/common/Makefile
++++ b/common/Makefile
+@@ -75,6 +75,7 @@ COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o
+ COBJS-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o
+ COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o
+ COBJS-$(CONFIG_CMD_DATE) += cmd_date.o
++COBJS-$(CONFIG_CMD_DEBUG) += cmd_debug.o
+ ifdef CONFIG_4xx
+ COBJS-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o
+ endif
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0012-cmd_mci.c-Support-writing-out-AT91-mci-config.patch b/recipes/u-boot/u-boot-2009.11/at91/0012-cmd_mci.c-Support-writing-out-AT91-mci-config.patch
new file mode 100644
index 0000000..90e9c96
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0012-cmd_mci.c-Support-writing-out-AT91-mci-config.patch
@@ -0,0 +1,100 @@
+From f6871edd6ee8af5557543d4580c43431ddfdd167 Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sun, 14 Mar 2010 00:16:41 +0100
+Subject: [PATCH] cmd_mci.c: Support writing out AT91 mci config
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ common/Makefile | 1 +
+ common/cmd_mci.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 68 insertions(+), 0 deletions(-)
+ create mode 100644 common/cmd_mci.c
+
+diff --git a/common/Makefile b/common/Makefile
+index a827be8..e1a72a9 100644
+--- a/common/Makefile
++++ b/common/Makefile
+@@ -106,6 +106,7 @@ COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o
+ COBJS-y += cmd_load.o
+ COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
+ COBJS-$(CONFIG_ID_EEPROM) += cmd_mac.o
++COBJS-$(CONFIG_CMD_MCI) += cmd_mci.o
+ COBJS-$(CONFIG_CMD_MEMORY) += cmd_mem.o
+ COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o
+ COBJS-$(CONFIG_CMD_MG_DISK) += cmd_mgdisk.o
+diff --git a/common/cmd_mci.c b/common/cmd_mci.c
+new file mode 100644
+index 0000000..dea811b
+--- /dev/null
++++ b/common/cmd_mci.c
+@@ -0,0 +1,67 @@
++/*
++ * (C) Copyright 2000
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <command.h>
++#include <debug.h>
++
++#undef DEBUG
++#if defined(DEBUG)
++#define pr_debug(fmt, args...) printf(fmt, ##args)
++#else
++#define pr_debug(...) do { } while(0)
++#endif
++
++
++int do_mci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
++{
++ int value;
++ char *p;
++ struct debug_flag *dbg;
++ pr_debug("Arg count = %d\n",argc);
++ for (value = 0; value < argc; value++) {
++ pr_debug("argv[%d] = \"%s\"\n",value,argv[value]);
++ }
++ switch (argc) {
++ case 2:
++ if (strcmp (s, "cid") == 0) {
++ printf("cid\n");
++ return 0;
++ } else if (strcmp (s, "csd") == 0) {
++ printf("csd\n");
++ return 0;
++ }
++ default:
++ printf ("Usage:\n%s\n", cmdtp->usage);
++ return 1;
++ }
++ return 0;
++}
++
++
++U_BOOT_CMD(
++ mci, 2, 1, do_mci,
++ "mci\t- display sd card info\n",
++ "[cid|csd]\n"
++ " - enable or disable debug"
++);
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0013-atmel_dataflash.c-Status-printout-depend-on-DEBUG.patch b/recipes/u-boot/u-boot-2009.11/at91/0013-atmel_dataflash.c-Status-printout-depend-on-DEBUG.patch
new file mode 100644
index 0000000..030129b
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0013-atmel_dataflash.c-Status-printout-depend-on-DEBUG.patch
@@ -0,0 +1,59 @@
+From 430af289fc8b48a53e4b899f64025d37689191df Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sun, 14 Mar 2010 00:20:07 +0100
+Subject: [PATCH] atmel_dataflash.c: Status printout depend on DEBUG
+
+Replace debug printf's with pr_debug, which
+only gets printed when DEBUG is set
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ drivers/spi/atmel_dataflash_spi.c | 25 +++++++++++++++----------
+ 1 files changed, 15 insertions(+), 10 deletions(-)
+
+diff --git a/drivers/spi/atmel_dataflash_spi.c b/drivers/spi/atmel_dataflash_spi.c
+index 5307e34..f4bf916 100644
+--- a/drivers/spi/atmel_dataflash_spi.c
++++ b/drivers/spi/atmel_dataflash_spi.c
+@@ -28,6 +28,11 @@
+ #include <asm/arch/at91_spi.h>
+
+ #include <dataflash.h>
++#ifdef DEBUG
++#define pr_debug(fmt, args...) printf(fmt, ##args)
++#else
++#define pr_debug(...) do { } while(0)
++#endif
+
+ #define AT91_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */
+ #define AT91_SPI_PCS1_DATAFLASH_CARD 0xD /* Chip Select 1: NPCS1%1101 */
+@@ -91,16 +96,16 @@ void AT91F_SpiInit(void)
+ * Add tempo to get SPI in a safe state.
+ * Should not be needed for new silicon (Rev B)
+ */
+- printf("CPU running at %d Hz\n",get_cpu_clk_rate());
+- printf("MCK running at %d Hz\n",get_mck_clk_rate());
+- printf("SPI_MR 0x%08x\n",mr=readl(AT91_BASE_SPI + AT91_SPI_MR));
+- printf("SPI_SR 0x%08x\n",sr=readl(AT91_BASE_SPI + AT91_SPI_SR));
+- printf("SPI_IMR 0x%08x\n",imr=readl(AT91_BASE_SPI + AT91_SPI_IMR));
+- printf("SPI_CSR0 0x%08x\n",csr0=readl(AT91_BASE_SPI + AT91_SPI_CSR(0)));
+- printf("SPI_CSR1 0x%08x\n",csr1=readl(AT91_BASE_SPI + AT91_SPI_CSR(1)));
+- printf("SPI_CSR2 0x%08x\n",csr2=readl(AT91_BASE_SPI + AT91_SPI_CSR(2)));
+- printf("SPI_CSR3 0x%08x\n",csr3=readl(AT91_BASE_SPI + AT91_SPI_CSR(3)));
+- printf("SPI SPEED = %d Hz\n", get_mck_clk_rate()/ ((csr0 >> 8) & 0xff));
++ pr_debug("CPU running at %d Hz\n",get_cpu_clk_rate());
++ pr_debug("MCK running at %d Hz\n",get_mck_clk_rate());
++ pr_debug("SPI_MR 0x%08x\n",mr=readl(AT91_BASE_SPI + AT91_SPI_MR));
++ pr_debug("SPI_SR 0x%08x\n",sr=readl(AT91_BASE_SPI + AT91_SPI_SR));
++ pr_debug("SPI_IMR 0x%08x\n",imr=readl(AT91_BASE_SPI + AT91_SPI_IMR));
++ pr_debug("SPI_CSR0 0x%08x\n",csr0=readl(AT91_BASE_SPI + AT91_SPI_CSR(0)));
++ pr_debug("SPI_CSR1 0x%08x\n",csr1=readl(AT91_BASE_SPI + AT91_SPI_CSR(1)));
++ pr_debug("SPI_CSR2 0x%08x\n",csr2=readl(AT91_BASE_SPI + AT91_SPI_CSR(2)));
++ pr_debug("SPI_CSR3 0x%08x\n",csr3=readl(AT91_BASE_SPI + AT91_SPI_CSR(3)));
++ pr_debug("SPI SPEED = %d Hz\n", get_mck_clk_rate()/ ((csr0 >> 8) & 0xff));
+ udelay(500000);
+
+ readl(AT91_BASE_SPI + AT91_SPI_SR);
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0014-AT91-MCI-Add-support-for-SD-Card.patch b/recipes/u-boot/u-boot-2009.11/at91/0014-AT91-MCI-Add-support-for-SD-Card.patch
new file mode 100644
index 0000000..c3fe6f7
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0014-AT91-MCI-Add-support-for-SD-Card.patch
@@ -0,0 +1,740 @@
+From ae5aeb4f6bd5428e69b0c6a8f25d500d82dc6cde Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sun, 14 Mar 2010 00:24:22 +0100
+Subject: [PATCH] AT91 MCI: Add support for SD-Card
+
+Add support for at91 mci peripheral.
+This allows MMC/SD Cards to be used.
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 8 +-
+ cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 14 +
+ cpu/arm926ejs/at91/clock.c | 5 +
+ drivers/mmc/atmel_mci.c | 393 ++++++++++++++++++++---
+ drivers/mmc/atmel_mci.h | 14 +
+ 5 files changed, 391 insertions(+), 43 deletions(-)
+
+diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+index 45a14a9..dd54ccd 100644
+--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
++++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+@@ -36,13 +36,14 @@
+ #include <asm/arch/hardware.h>
+ #include <lcd.h>
+ #include <atmel_lcdc.h>
++
+ #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+ #include <net.h>
+ #endif
+ #include <netdev.h>
+
+ DECLARE_GLOBAL_DATA_PTR;
+-
++extern atmel_mci_init(void);
+ /* ------------------------------------------------------------------------- */
+ /*
+ * Miscelaneous platform dependent initialisations
+@@ -258,6 +259,11 @@ int board_init(void)
+ at91_spi0_hw_init(1 << 4);
+ #endif
+
++#if defined(CONFIG_MMC)
++ at91_mci0_hw_init();
++ atmel_mci_init();
++#endif
++
+ #ifdef CONFIG_MACB
+ at91sam9m10g45ek_macb_hw_init();
+ #endif
+diff --git a/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
+index 07717ea..ad25e41 100644
+--- a/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
++++ b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
+@@ -172,3 +172,17 @@ void at91_macb_hw_init(void)
+ #endif
+ }
+ #endif
++
++#if defined(CONFIG_MMC)
++void at91_mci0_hw_init()
++{
++ at91_set_A_periph(AT91_PIN_PA0, 0); /* MCI0_CK */
++ at91_set_A_periph(AT91_PIN_PA1, 0); /* MCI0_CDA */
++ at91_set_A_periph(AT91_PIN_PA2, 0); /* MCI0_DA0 */
++ at91_set_A_periph(AT91_PIN_PA3, 0); /* MCI0_DA1 */
++ at91_set_A_periph(AT91_PIN_PA4, 0); /* MCI0_DA2 */
++ at91_set_A_periph(AT91_PIN_PA5, 0); /* MCI0_DA3 */
++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_MCI0);
++}
++#endif
++
+diff --git a/cpu/arm926ejs/at91/clock.c b/cpu/arm926ejs/at91/clock.c
+index 574f488..3b5e66e 100644
+--- a/cpu/arm926ejs/at91/clock.c
++++ b/cpu/arm926ejs/at91/clock.c
+@@ -39,6 +39,11 @@ unsigned long get_mck_clk_rate(void)
+ return mck_rate_hz;
+ }
+
++inline unsigned long get_mci_clk_rate(void)
++{
++ return mck_rate_hz;
++}
++
+ unsigned long get_plla_clk_rate(void)
+ {
+ return plla_rate_hz;
+diff --git a/drivers/mmc/atmel_mci.c b/drivers/mmc/atmel_mci.c
+index 3946ffe..959bf6a 100644
+--- a/drivers/mmc/atmel_mci.c
++++ b/drivers/mmc/atmel_mci.c
+@@ -19,8 +19,10 @@
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
++#define DEBUG
+ #include <common.h>
+
++#include <fat.h>
+ #include <part.h>
+ #include <mmc.h>
+
+@@ -32,8 +34,18 @@
+
+ #include "atmel_mci.h"
+
+-#ifdef DEBUG
+-#define pr_debug(fmt, args...) printf(fmt, ##args)
++#if defined(CONFIG_CMD_DEBUG)
++#define DEBUG
++#include <debug.h>
++struct debug_flag mci_debug = {
++ .debug = 0,
++ .name = "mci",
++};
++#define pr_debugl(level, fmt, args...) if(mci_debug.debug >= level) printf(fmt, ##args)
++#define pr_debug(fmt, args...) if(mci_debug.debug > 0) printf(fmt, ##args)
++#elif defined(DEBUG)
++#define pr_debugl(level, fmt, args...) printf(fmt, ##args)
++#define pr_debug(fmt, args...) printf(fmt, ##args)
+ #else
+ #define pr_debug(...) do { } while(0)
+ #endif
+@@ -43,7 +55,7 @@
+ #endif
+
+ #ifndef CONFIG_SYS_MMC_CLK_PP
+-#define CONFIG_SYS_MMC_CLK_PP 5000000
++#define CONFIG_SYS_MMC_CLK_PP 15000000
+ #endif
+
+ #ifndef CONFIG_SYS_MMC_OP_COND
+@@ -53,10 +65,58 @@
+ #define MMC_DEFAULT_BLKLEN 512
+ #define MMC_DEFAULT_RCA 1
+
++#ifdef DEBUG
++char *cmd_name[56] = {
++ [0] = "GO_IDLE_STATE",
++ [1] = "SEND_OP_COND",
++ [2] = "ALL_SEND_CID",
++ [3] = "SET_RELATIVE_ADDR",
++ [4] = "SET_DSR",
++ [6] = "SWITCH",
++ [7] = "SELECT_CARD",
++ [8] = "SEND_EXT_CSD",
++ [9] = "SEND_CSD",
++ [10] = "SEND_CID",
++ [12] = "STOP_TRANSMISSION",
++ [13] = "SEND_STATUS",
++ [16] = "SET_BLOCKLEN",
++ [17] = "READ_SINGLE_BLOCK",
++ [18] = "READ_MULTIPLE_BLOCK",
++ [24] = "WRITE_SINGLE_BLOCK",
++ [25] = "WRITE_MULTIPLE_BLOCK",
++ [55] = "APP_CMD"
++};
++#endif
++char *month[13] = {
++ [ 1] = "Jan",
++ [ 2] = "Feb",
++ [ 3] = "Mar",
++ [ 4] = "Apr",
++ [ 5] = "May",
++ [ 6] = "Jun",
++ [ 7] = "Jul",
++ [ 8] = "Aug",
++ [ 9] = "Sep",
++ [10] = "Oct",
++ [11] = "Nov",
++ [12] = "Dec"
++};
++
++
++extern int get_mci_clk_rate(void);
++
+ static unsigned int mmc_rca;
+ static int mmc_card_is_sd;
+ static block_dev_desc_t mmc_blkdev;
+
++int atmel_mci_init(void)
++{
++#if defined(CONFIG_CMD_DEBUG)
++ register_debug_variable(&mci_debug);
++#endif
++ return 0;
++}
++
+ block_dev_desc_t *mmc_get_dev(int dev)
+ {
+ return &mmc_blkdev;
+@@ -114,9 +174,16 @@ mmc_cmd(unsigned long cmd, unsigned long arg,
+ unsigned long error_flags;
+ u32 status;
+
+- pr_debug("mmc: CMD%lu 0x%lx (flags 0x%lx)\n",
+- cmd, arg, flags);
++#ifdef DEBUG
++ char *name = NULL;
++ if(cmd <= 55)
++ name = cmd_name[cmd];
++ if (name == NULL)
++ name = "UNKNOWN";
+
++ pr_debugl(2,"mmc: %s [CMD%lu] 0x%lx (flags 0x%lx)\n",
++ name, cmd, arg, flags);
++#endif
+ error_flags = ERROR_FLAGS;
+ if (!(flags & RESP_NO_CRC))
+ error_flags |= MMCI_BIT(RCRCE);
+@@ -135,7 +202,7 @@ mmc_cmd(unsigned long cmd, unsigned long arg,
+ status = mmci_readl(SR);
+ } while (!(status & MMCI_BIT(CMDRDY)));
+
+- pr_debug("mmc: status 0x%08x\n", status);
++ pr_debugl(2,"mmc: status 0x%08x\n", status);
+
+ if (status & error_flags) {
+ printf("mmc: command %lu failed (status: 0x%08x)\n",
+@@ -144,13 +211,13 @@ mmc_cmd(unsigned long cmd, unsigned long arg,
+ }
+
+ if (response_words)
+- pr_debug("mmc: response:");
++ pr_debugl(2,"mmc: response:");
+
+ for (i = 0; i < response_words; i++) {
+ response[i] = mmci_readl(RSPR);
+- pr_debug(" %08lx", response[i]);
++ pr_debugl(2," %08lx", response[i]);
+ }
+- pr_debug("\n");
++ pr_debugl(2,"\n");
+
+ return 0;
+ }
+@@ -183,6 +250,8 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
+ void *buffer)
+ {
+ int ret, i = 0;
++
++ int timeout;
+ unsigned long resp[4];
+ unsigned long card_status, data;
+ unsigned long wordcount;
+@@ -203,22 +272,32 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
+ ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR);
+ if (ret) goto out;
+
+- pr_debug("MCI_DTOR = %08lx\n", mmci_readl(DTOR));
++ pr_debugl(2, "MCI_DTOR = %08x\n", mmci_readl(DTOR));
+
+ for (i = 0; i < blkcnt; i++, start++) {
+ ret = mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK,
+ start * mmc_blkdev.blksz, resp,
+ (R1 | NCR | TRCMD_START | TRDIR_READ
+ | TRTYP_BLOCK));
+- if (ret) goto out;
++ if (ret) {
++ pr_debugl(1,"\nmmc_bread: premature exit\n");
++ goto out;
++ }
+
+ ret = -EIO;
+ wordcount = 0;
+ do {
++ timeout = 0;
+ do {
+ status = mmci_readl(SR);
+ if (status & (ERROR_FLAGS | MMCI_BIT(OVRE)))
+ goto read_error;
++ timeout++;
++ if(timeout > 0x1000000) {
++ pr_debugl(1,"\nmmc: read timeout\n");
++ goto read_error;
++ }
++
+ } while (!(status & MMCI_BIT(RXRDY)));
+
+ if (status & MMCI_BIT(RXRDY)) {
+@@ -229,28 +308,50 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
+ }
+ } while(wordcount < (mmc_blkdev.blksz / 4));
+
+- pr_debug("mmc: read %u words, waiting for BLKE\n", wordcount);
+-
++ pr_debugl(2,"mmc: read %u dwords, waiting for BLKE\n", (unsigned int) wordcount);
++#ifndef CONFIG_ATMEL_HSMCI
+ do {
+ status = mmci_readl(SR);
+ } while (!(status & MMCI_BIT(BLKE)));
+-
+- putc('.');
++#endif
++ if(i%10 == 1) {
++ pr_debugl(1, ".");
++ }
++ udelay(1);
+ }
+
+ out:
++ pr_debugl(1,"\nmmc_bread ready\n");
+ /* Put the device back into Standby state */
+ mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, NCR);
+ return i;
+
+ read_error:
+- mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
+ printf("mmc: bread failed, status = %08x, card status = %08lx\n",
+ status, card_status);
++ mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
+ goto out;
+ }
+
+-static void mmc_parse_cid(struct mmc_cid *cid, unsigned long *resp)
++#if 0
++static void mmc_parse_cid_se(struct mmc_cid *cid, unsigned long *resp)
++{
++ cid->mid = resp[0] & 0xff;
++ cid->oid = (resp[0] >> 8) & 0xffff;
++ cid->pnm[0] = resp[0] >> 24;
++ cid->pnm[1] = resp[1];
++ cid->pnm[2] = resp[1] >> 8;
++ cid->pnm[3] = resp[1] >> 16;
++ cid->pnm[4] = resp[1] >> 24;
++ cid->pnm[5] = resp[2];
++ cid->pnm[6] = 0;
++ cid->prv = resp[2] >> 8;
++ cid->psn = (resp[2] >> 16) | (resp[3] << 16);
++ cid->mdt = (resp[3] >> 16) & 0x0ffff;
++
++}
++#endif
++static void mmc_parse_cid_be(struct mmc_cid *cid, unsigned long *resp)
+ {
+ cid->mid = resp[0] >> 24;
+ cid->oid = (resp[0] >> 8) & 0xffff;
+@@ -265,8 +366,24 @@ static void mmc_parse_cid(struct mmc_cid *cid, unsigned long *resp)
+ cid->psn = (resp[2] << 16) | (resp[3] >> 16);
+ cid->mdt = resp[3] >> 8;
+ }
+-
+-static void sd_parse_cid(struct mmc_cid *cid, unsigned long *resp)
++#if 0
++static void sd_parse_cid_le(struct mmc_cid *cid, unsigned long *resp)
++{
++ cid->mid = resp[0] & 0xff;
++ cid->oid = (resp[0] >> 8) & 0xffff;
++ cid->pnm[0] = resp[0] >> 24;
++ cid->pnm[1] = resp[1];
++ cid->pnm[2] = resp[1] >> 8;
++ cid->pnm[3] = resp[1] >> 16;
++ cid->pnm[4] = resp[1] >> 24;
++ cid->pnm[5] = 0;
++ cid->pnm[6] = 0;
++ cid->prv = resp[2] & 0xff;
++ cid->psn = (resp[2] >> 8) | (resp[3] << 24);
++ cid->mdt = (resp[3] >> 8) & 0x0ffff;
++}
++#endif
++static void sd_parse_cid_be(struct mmc_cid *cid, unsigned long *resp)
+ {
+ cid->mid = resp[0] >> 24;
+ cid->oid = (resp[0] >> 8) & 0xffff;
+@@ -281,6 +398,135 @@ static void sd_parse_cid(struct mmc_cid *cid, unsigned long *resp)
+ cid->psn = (resp[2] << 8) | (resp[3] >> 24);
+ cid->mdt = (resp[3] >> 8) & 0x0fff;
+ }
++#if 0
++static void sd_parse_cid_lx(struct mmc_cid *cid, unsigned char *resp)
++{
++
++ cid->mid = resp[0];
++ cid->oid = (resp[2] << 8) | resp[0];;
++ cid->pnm[0] = resp[3];
++ cid->pnm[1] = resp[4];
++ cid->pnm[2] = resp[5];
++ cid->pnm[3] = resp[6];
++ cid->pnm[4] = resp[7];
++ cid->pnm[5] = 0;
++ cid->pnm[6] = 0;
++ cid->prv = resp[8];
++ cid->psn =
++ (resp[ 9] * 0x00000001) |
++ (resp[10] * 0x00000100) |
++ (resp[11] * 0x00010000) |
++ (resp[12] * 0x01000000);
++ cid->mdt =
++ (resp[13] * 0x00000001) |
++ (resp[14] * 0x00000100);
++}
++#endif
++#define BM00 0x0000
++#define BM01 0x0001
++#define BM02 0x0003
++#define BM03 0x0007
++#define BM04 0x000f
++#define BM05 0x001f
++#define BM06 0x003f
++#define BM07 0x007f
++#define BM08 0x0ff
++#define BM09 0x01ff
++#define BM10 0x03ff
++#define BM11 0x07ff
++#define BM12 0x0fff
++
++static void mmc_parse_csd(unsigned long *resp, struct mmc_csd *csd)
++{
++ unsigned long *csd_raw = resp;
++ printf("CSD data: %08lx %08lx %08lx %08lx\n",
++ csd_raw[0], csd_raw[1], csd_raw[2], csd_raw[3]);
++
++ csd->csd_structure = ((resp[0] >> 30) & BM02);
++ csd->spec_vers = ((resp[0] >> 26) & BM04);
++ csd->rsvd1 = ((resp[0] >> 24) & BM02);
++ csd->taac = ((resp[0] >> 16) & BM08);
++ csd->nsac = ((resp[0] >> 8) & BM08);
++ csd->tran_speed = ((resp[0] >> 0) & BM08);
++
++ csd->ccc = ((resp[1] >> 20) & BM12);
++ csd->read_bl_len = ((resp[1] >> 16) & BM04);
++ csd->read_bl_partial = ((resp[1] >> 15) & BM01);
++ csd->write_blk_misalign = ((resp[1] >> 14) & BM01);
++ csd->read_blk_misalign = ((resp[1] >> 13) & BM01);
++ csd->dsr_imp = ((resp[1] >> 12) & BM01);
++ csd->rsvd2 = ((resp[1] >> 10) & BM02);
++ csd->c_size = (((resp[1] >> 0) & BM10) << 2) |
++ ((resp[2] >> 30) & BM02);
++
++ csd->vdd_r_curr_min = ((resp[2] >> 27) & BM03);
++ csd->vdd_r_curr_max = ((resp[2] >> 24) & BM03);
++ csd->vdd_w_curr_min = ((resp[2] >> 21) & BM03);
++ csd->vdd_w_curr_max = ((resp[2] >> 18) & BM03);
++ csd->c_size_mult = ((resp[2] >> 15) & BM03);
++
++ /* original: erase_blk_enable:1, sector_size:7, wp_grp_size:7 */
++ csd->sector_size = ((resp[2] >> 12) & BM05);
++ csd->erase_grp_size = ((resp[2] >> 6) & BM05);
++ csd->wp_grp_size = ((resp[2] >> 0) & BM05);
++
++ csd->wp_grp_enable = ((resp[3] >> 31) & BM01);
++
++ /* original: reserved for MultiMediaCompatability */
++ csd->default_ecc = ((resp[3] >> 29) & BM02);
++
++ csd->r2w_factor = ((resp[3] >> 26) & BM03);
++ csd->write_bl_len = ((resp[3] >> 22) & BM04);
++ csd->write_bl_partial = ((resp[3] >> 21) & BM01);
++ csd->rsvd3 = ((resp[3] >> 16) & BM05);
++ csd->file_format_grp = ((resp[3] >> 15) & BM01);
++ csd->copy = ((resp[3] >> 14) & BM01);
++ csd->perm_write_protect = ((resp[3] >> 13) & BM01);
++ csd->tmp_write_protect = ((resp[3] >> 12) & BM01);
++ csd->file_format = ((resp[3] >> 10) & BM02);
++ csd->ecc = ((resp[3] >> 8) & BM02);
++ csd->crc = ((resp[3] >> 1) & BM07);
++ csd->one = ((resp[3] >> 0) & BM01);
++
++ pr_debugl(2," csd_structure= 2:0x%08x\n", csd->csd_structure);
++ pr_debugl(2, "spec_vers= 4:0x%08x\n", csd->spec_vers);
++ pr_debugl(2, "rsvd1= 2:0x%08x\n", csd->rsvd1);
++ pr_debugl(2, "taac= 8:0x%08x\n", csd->taac);
++ pr_debugl(2, "nsac= 8:0x%08x\n", csd->nsac);
++ pr_debugl(2, "tran_speed= 8:0x%08x\n", csd->tran_speed);
++ pr_debugl(2, "ccc= 12:0x%08x\n", csd->ccc);
++ pr_debugl(2, "read_bl_len= 4:0x%08x\n", csd->read_bl_len);
++ pr_debugl(2, "read_bl_partial= 1:0x%08x\n", csd->read_bl_partial);
++ pr_debugl(2, "write_blk_misalign= 1:0x%08x\n", csd->write_blk_misalign);
++ pr_debugl(2, "read_blk_misalign= 1:0x%08x\n", csd->read_blk_misalign);
++ pr_debugl(2, "dsr_imp= 1:0x%08x\n", csd->dsr_imp);
++ pr_debugl(2, "rsvd2= 1:0x%08x\n", csd->rsvd2);
++ pr_debugl(2, "c_size= 12:0x%08x\n", csd->c_size);
++ pr_debugl(2, "vdd_r_curr_min= 3:0x%08x\n", csd->vdd_r_curr_min);
++ pr_debugl(2, "vdd_r_curr_max= 3:0x%08x\n", csd->vdd_r_curr_max);
++ pr_debugl(2, "vdd_w_curr_min= 3:0x%08x\n", csd->vdd_w_curr_min);
++ pr_debugl(2, "vdd_w_curr_max= 3:0x%08x\n", csd->vdd_w_curr_max);
++ pr_debugl(2, "c_size_mult= 3:0x%08x\n", csd->c_size_mult);
++ pr_debugl(2, "sector_size= 5:0x%08x\n", csd->sector_size);
++ pr_debugl(2, "erase_grp_size= 5:0x%08x\n", csd->erase_grp_size);
++ pr_debugl(2, "wp_grp_size= 5:0x%08x\n", csd->wp_grp_size);
++ pr_debugl(2, "wp_grp_enable= 1:0x%08x\n", csd->wp_grp_enable);
++ pr_debugl(2, "default_ecc= 0x%08x\n", csd->default_ecc);
++ pr_debugl(2, "r2w_factor= 0x%08x\n", csd->r2w_factor);
++ pr_debugl(2, "write_bl_len= 0x%08x\n", csd->write_bl_len);
++ pr_debugl(2, "write_bl_partial= 0x%08x\n", csd->write_bl_partial);
++ pr_debugl(2, "rsvd3= 0x%08x\n", csd->rsvd3);
++ pr_debugl(2, "file_format_grp= 1:0x%08x\n", csd->file_format_grp);
++ pr_debugl(2, "copy= 1:0x%08x\n", csd->copy);
++ pr_debugl(2, "perm_write_protect= 1:0x%08x\n", csd->perm_write_protect);
++ pr_debugl(2, "tmp_write_protect= 1:0x%08x\n", csd->tmp_write_protect);
++ pr_debugl(2, "file_format= 0x%08x\n", csd->file_format);
++ pr_debugl(2, "ecc= 0x%08x\n", csd->ecc);
++ pr_debugl(2, "crc= 0x%08x\n", csd->crc);
++ pr_debugl(2, "one= 0x%08x\n", csd->one);
++}
++
++
+
+ static void mmc_dump_cid(const struct mmc_cid *cid)
+ {
+@@ -290,15 +536,14 @@ static void mmc_dump_cid(const struct mmc_cid *cid)
+ printf("Product Revision: %u.%u\n",
+ cid->prv >> 4, cid->prv & 0x0f);
+ printf("Product Serial Number: %lu\n", cid->psn);
+- printf("Manufacturing Date: %02u/%02u\n",
+- cid->mdt >> 4, cid->mdt & 0x0f);
++ printf("Manufacturing Date: %s %4u\n",
++ month[cid->mdt & 0x0f], 2000u + ((cid->mdt >> 4) && 0xff));
++ pr_debug("mdt: %02x\n",cid->mdt);
+ }
+
+ static void mmc_dump_csd(const struct mmc_csd *csd)
+ {
+- unsigned long *csd_raw = (unsigned long *)csd;
+- printf("CSD data: %08lx %08lx %08lx %08lx\n",
+- csd_raw[0], csd_raw[1], csd_raw[2], csd_raw[3]);
++
+ printf("CSD structure version: 1.%u\n", csd->csd_structure);
+ printf("MMC System Spec version: %u\n", csd->spec_vers);
+ printf("Card command classes: %03x\n", csd->ccc);
+@@ -339,14 +584,19 @@ static int mmc_idle_cards(void)
+ return ret;
+
+ /* Keep the bus idle for 74 clock cycles */
+- return mmc_cmd(0, 0, NULL, INIT_CMD);
++ return mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, NULL, INIT_CMD);
+ }
+
+ static int sd_init_card(struct mmc_cid *cid, int verbose)
+ {
+ unsigned long resp[4];
+ int i, ret = 0;
+-
++#if 0
++ struct mmc_cid *cid_le;
++ struct mmc_cid *cid_be;
++ struct mmc_cid *cid_lx;
++#endif
++ unsigned char *p;
+ mmc_idle_cards();
+ for (i = 0; i < 1000; i++) {
+ ret = mmc_acmd(SD_CMD_APP_SEND_OP_COND, CONFIG_SYS_MMC_OP_COND,
+@@ -362,18 +612,45 @@ static int sd_init_card(struct mmc_cid *cid, int verbose)
+ ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, R2 | NID);
+ if (ret)
+ return ret;
+- sd_parse_cid(cid, resp);
++#if 0
++ sd_parse_cid_le(cid_le, resp);
++ if (verbose)
++ mmc_dump_cid(cid_le);
++
++ sd_parse_cid_be(cid_be, resp);
++ if (verbose)
++ mmc_dump_cid(cid_be);
++
++ sd_parse_cid_lx(cid_lx, (unsigned char *) resp);
++ if (verbose)
++ mmc_dump_cid(cid_lx);
++#endif
++ sd_parse_cid_be(cid, resp);
+ if (verbose)
+ mmc_dump_cid(cid);
+
++ for(i = 0; i < 4; i++) {
++ pr_debug("CID[%d]: %08x\n",i,(unsigned int) resp[i]);
++ }
++ p = (unsigned char *) resp;
++ for(i = 0; i < 15; i++) {
++ pr_debug("%2d: '%c'\n",i,*p++);
++ }
++
+ /* Get RCA of the card that responded */
++ /* CMD3 */
+ ret = mmc_cmd(SD_CMD_SEND_RELATIVE_ADDR, 0, resp, R6 | NCR);
+ if (ret)
+ return ret;
+
+- mmc_rca = resp[0] >> 16;
++ pr_debug("RCA resp = 0x%08x\n",(unsigned int) resp[0]);
++ mmc_rca =
++ (((resp[0] >> 24) & 0xff) * 0x00000100) |
++ (((resp[0] >> 16) & 0xff) * 0x00000001);
++
++
+ if (verbose)
+- printf("SD Card detected (RCA %u)\n", mmc_rca);
++ printf("SD Card detected (RCA %u:0x%04x)\n", mmc_rca,mmc_rca);
+ mmc_card_is_sd = 1;
+ return 0;
+ }
+@@ -399,7 +676,8 @@ static int mmc_init_card(struct mmc_cid *cid, int verbose)
+ ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, R2 | NID | OPEN_DRAIN);
+ if (ret)
+ return ret;
+- mmc_parse_cid(cid, resp);
++
++ mmc_parse_cid_be(cid, resp);
+ if (verbose)
+ mmc_dump_cid(cid);
+
+@@ -467,8 +745,9 @@ int mmc_legacy_init(int verbose)
+ {
+ struct mmc_cid cid;
+ struct mmc_csd csd;
+- unsigned int max_blksz;
+ int ret;
++ unsigned long resp[4];
++ int max_blksz;
+
+ /* Initialize controller */
+ mmci_writel(CR, MMCI_BIT(SWRST));
+@@ -488,9 +767,13 @@ int mmc_legacy_init(int verbose)
+ return ret;
+
+ /* Get CSD from the card */
+- ret = mmc_cmd(MMC_CMD_SEND_CSD, mmc_rca << 16, &csd, R2 | NCR);
++ /* CMD9 */
++ ret = mmc_cmd(MMC_CMD_SEND_CSD, mmc_rca << 16, resp, R2 | NCR);
+ if (ret)
+ return ret;
++
++ mmc_parse_csd(resp, &csd);
++
+ if (verbose)
+ mmc_dump_csd(&csd);
+
+@@ -498,15 +781,40 @@ int mmc_legacy_init(int verbose)
+
+ /* Initialize the blockdev structure */
+ mmc_blkdev.if_type = IF_TYPE_MMC;
++ mmc_blkdev.dev = 1;
+ mmc_blkdev.part_type = PART_TYPE_DOS;
+- mmc_blkdev.block_read = mmc_bread;
++ mmc_blkdev.target = 0;
++ mmc_blkdev.lun = 0;
++ mmc_blkdev.type = DEV_TYPE_HARDDISK;
++ mmc_blkdev.removable = 1;
++ mmc_blkdev.lba = (csd.c_size + 1) * (1 << (csd.c_size_mult + 2));
++ mmc_blkdev.blksz = MMC_DEFAULT_BLKLEN;
+ sprintf((char *)mmc_blkdev.vendor,
+- "Man %02x%04x Snr %08lx",
++ "Man %02x %04x Snr %08lx",
+ cid.mid, cid.oid, cid.psn);
+- strncpy((char *)mmc_blkdev.product, cid.pnm,
+- sizeof(mmc_blkdev.product));
++ sprintf((char *)mmc_blkdev.product, "%s",cid.pnm);
+ sprintf((char *)mmc_blkdev.revision, "%x %x",
+ cid.prv >> 4, cid.prv & 0x0f);
++ mmc_blkdev.block_read = mmc_bread;
++
++ pr_debugl(2,"c_size: %d, c_size_mult: %d, lba: %d\n",
++ csd.c_size,
++ csd.c_size_mult,
++ (int) mmc_blkdev.lba);
++
++ mci_set_mode(CONFIG_SYS_MMC_CLK_PP, mmc_blkdev.blksz);
++
++#if 0
++ pr_debugl(2,"mmc select card\n");
++ /* CMD7 */
++ ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, R1 | NCR);
++ if (ret) goto out;
++
++ /* CMD16 */
++ pr_debugl(2,"mmc set blocklen\n");
++ ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR);
++ if (ret) goto out;
++#endif
+
+ /*
+ * If we can't use 512 byte blocks, refuse to deal with the
+@@ -514,20 +822,21 @@ int mmc_legacy_init(int verbose)
+ */
+ max_blksz = 1 << csd.read_bl_len;
+ if (max_blksz < 512 || (max_blksz > 512 && !csd.read_bl_partial)) {
+- printf("Card does not support 512 byte reads, aborting.\n");
+- return -ENODEV;
++ printf("Card does not support 512 byte reads, aborting.\n");
++ return -ENODEV;
++ } else {
++ mmc_blkdev.blksz = 512;
+ }
+- mmc_blkdev.blksz = 512;
+ mmc_blkdev.lba = (csd.c_size + 1) * (1 << (csd.c_size_mult + 2));
+
+- mci_set_mode(CONFIG_SYS_MMC_CLK_PP, mmc_blkdev.blksz);
+
+-#if 0
++#if 1
+ if (fat_register_device(&mmc_blkdev, 1))
+ printf("Could not register MMC fat device\n");
+ #else
++ pr_debugl(1,"mmc init part\n");
+ init_part(&mmc_blkdev);
+ #endif
+-
++ pr_debugl(1,"mmc init done\n");
+ return 0;
+ }
+diff --git a/drivers/mmc/atmel_mci.h b/drivers/mmc/atmel_mci.h
+index 5b4f5c9..2d716c0 100644
+--- a/drivers/mmc/atmel_mci.h
++++ b/drivers/mmc/atmel_mci.h
+@@ -29,6 +29,10 @@
+ #define MMCI_SDCR 0x000c
+ #define MMCI_ARGR 0x0010
+ #define MMCI_CMDR 0x0014
++#if defined(CONFIG_ATMEL_HSMCI)
++#define MMCI_BLKR 0x0018
++#define MMCI_CSTOR 0x001c
++#endif
+ #define MMCI_RSPR 0x0020
+ #define MMCI_RSPR1 0x0024
+ #define MMCI_RSPR2 0x0028
+@@ -40,6 +44,14 @@
+ #define MMCI_IDR 0x0048
+ #define MMCI_IMR 0x004c
+
++#if defined(CONFIG_ATMEL_HSMCI)
++#define MMCI_DMA 0x0050
++#define MMCI_CFG 0x0054
++#define MMCI_WPMR 0x00E4
++#define MMCI_WPSR 0x00E8
++#define MMCI_FIFO 0x0200
++#endif
++
+ /* Bitfields in CR */
+ #define MMCI_MCIEN_OFFSET 0
+ #define MMCI_MCIEN_SIZE 1
+@@ -198,4 +210,6 @@
+ #define mmci_writel(reg,value) \
+ writel((value), (void *)MMCI_BASE + MMCI_##reg)
+
++extern int atmel_mci_init(void);
++
+ #endif /* __CPU_AT32AP_ATMEL_MCI_H__ */
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot-2009.11/at91/0015-sam9m10g45ek-Add-configuration-file.patch b/recipes/u-boot/u-boot-2009.11/at91/0015-sam9m10g45ek-Add-configuration-file.patch
new file mode 100644
index 0000000..fe128dc
--- /dev/null
+++ b/recipes/u-boot/u-boot-2009.11/at91/0015-sam9m10g45ek-Add-configuration-file.patch
@@ -0,0 +1,113 @@
+From 6002730900b2c062ce8433aba61cabbe7253eb17 Mon Sep 17 00:00:00 2001
+From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+Date: Sun, 14 Mar 2010 00:25:56 +0100
+Subject: [PATCH] sam9m10g45ek: Add configuration file
+
+Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
+---
+ include/configs/at91sam9m10g45ek.h | 47 +++++++++++++++++++++++++++++++----
+ 1 files changed, 41 insertions(+), 6 deletions(-)
+
+diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
+index a60bb6b..6ac56ca 100644
+--- a/include/configs/at91sam9m10g45ek.h
++++ b/include/configs/at91sam9m10g45ek.h
+@@ -26,7 +26,8 @@
+
+ #ifndef __CONFIG_H
+ #define __CONFIG_H
+-
++#define CONFIG_CMD_DEBUG 1
++#define CONFIG_SYS_ROOTFS_SD 1
+ /* ARM asynchronous clock */
+ #define AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+ #define CONFIG_SYS_HZ 1000
+@@ -96,13 +97,28 @@
+ #undef CONFIG_CMD_IMI
+ #undef CONFIG_CMD_IMLS
+ #undef CONFIG_CMD_LOADS
+-#undef CONFIG_CMD_SOURCE
+
++#define CONFIG_CMD_SOURCE
++#undef CONFIG_CMD_XIMG
++#define CONFIG_CMD_ASKENV
++#define CONFIG_CMD_EXT2
++#define CONFIG_CMD_FAT
++#undef CONFIG_CMD_JFFS2
++#define CONFIG_CMD_MMC
+ #define CONFIG_CMD_PING 1
+ #define CONFIG_CMD_DHCP 1
+ #define CONFIG_CMD_NAND 1
+ #define CONFIG_CMD_USB 1
+
++/* MCI */
++#define MMCI_BASE AT91SAM9G45_BASE_MCI0
++#define CONFIG_MMC 1
++#define CONFIG_ATMEL_MCI 1
++#define CONFIG_ATMEL_HSMCI 1
++#define CONFIG_SYS_MMC_CLK_OD 1000000
++#define CONFIG_SUPPORT_VFAT
++
++
+ /* SDRAM */
+ #define CONFIG_NR_DRAM_BANKS 1
+ #define PHYS_SDRAM 0x70000000
+@@ -122,7 +138,8 @@
+ #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
+ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
+-#define AT91_SPI_CLK 15000000
++#define AT91_SPI_CLK 1000000
++#define AT91_SPI_MODE AT91_SPI_MODE3
+ #define DATAFLASH_TCSS (0x1a << 16)
+ #define DATAFLASH_TCHS (0x1 << 24)
+
+@@ -179,10 +196,11 @@
+ #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+ #define CONFIG_USB_STORAGE 1
+
+-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
++
++#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* load address */
+
+ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+-#define CONFIG_SYS_MEMTEST_END 0x23e00000
++#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM + PHYS_SDRAM_SIZE
+
+ #ifdef CONFIG_SYS_USE_DATAFLASH
+
+@@ -192,13 +210,30 @@
+ #define CONFIG_SYS_MONITOR_BASE (0xC0000000 + 0x8400)
+ #define CONFIG_ENV_OFFSET 0x4200
+ #define CONFIG_ENV_ADDR (0xC0000000 + CONFIG_ENV_OFFSET)
++#if 1
+ #define CONFIG_ENV_SIZE 0x4200
+-#define CONFIG_ENV_SECT_SIZE 0x4200
++#define CONFIG_ENV_SECT_SIZE 0x420
++#else
++#define CONFIG_ENV_SIZE 0x420
++#define CONFIG_ENV_SECT_SIZE 0x420
++#endif
++
++#ifdef CONFIG_SYS_ROOTFS_SD
++#define CONFIG_BOOTCOMMAND "mmc init; fatload mmc 1:1 0x72000000 uImage; bootm 0x72000000"
++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
++ "root=/dev/mmcblk1p2 " \
++ "rootdelay=2 "\
++ "rootfstype=rootfs rw"
++#endif
++
++#ifdef CONFIG_SYS_ROOTFS_NAND
+ #define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x72000000 0x290000; bootm 0x72000000"
+ #define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock1 " \
+ "mtdparts=atmel_nand:4M(unused)ro,-(root) "\
+ "rw rootfstype=jffs2"
++#endif
++
+
+ #else /* CONFIG_SYS_USE_NANDFLASH */
+
+--
+1.6.0.2
+
diff --git a/recipes/u-boot/u-boot_2009.11.bb b/recipes/u-boot/u-boot_2009.11.bb
new file mode 100644
index 0000000..fd88679
--- /dev/null
+++ b/recipes/u-boot/u-boot_2009.11.bb
@@ -0,0 +1,44 @@
+PR = "r1"
+require u-boot.inc
+
+DEFAULT_PREFERENCE = "-1"
+DEFAULT_PREFERENCE_at91sam9g10ek = "2"
+DEFAULT_PREFERENCE_at91sam9g20ek = "2"
+DEFAULT_PREFERENCE_at91sam9g45ek = "2"
+DEFAULT_PREFERENCE_at91sam9m10ekes = "2"
+DEFAULT_PREFERENCE_at91sam9m10g45ek = "2"
+DEFAULT_PREFERENCE_at91sam9g45ek = "2"
+DEFAULT_PREFERENCE_at91sam9g45ekes = "2"
+
+
+SRC_URI = "ftp://ftp.denx.de/pub/u-boot/u-boot-${PV}.tar.bz2 "
+
+SRC_URI_append_at91 = "\
+ file://at91/0002-Support-running-ATSAM9G45-M10-from-dataflash.patch;patch=1 \
+ file://at91/0003-Update-SAM9M10-G45-config-for-dataflash-support.patch;patch=1 \
+ file://at91/0004-Support-selecting-SPI-mode-in-dataflash-driver.patch;patch=1 \
+ file://at91/0005-mux-replace-verbose-dataflash_mmc_mux-command.patch;patch=1 \
+ file://at91/0006-libarm-board.c-Gets-overwritten-workaround.patch;patch=1 \
+ file://at91/0007-fat.c-Add-DEBUG-currently-disabled.patch;patch=1 \
+ file://at91/0008-env_dataflash.c-More-robust-handling.patch;patch=1 \
+ file://at91/0009-cmd_debug.c-Add-a-generic-function-for-debug-vars.patch;patch=1 \
+ file://at91/0010-debug.h-Add-header-for-debug-variables.patch;patch=1 \
+ file://at91/0011-common-Makefile-Add-cmd_debug.c-to-build.patch;patch=1 \
+ file://at91/0012-cmd_mci.c-Support-writing-out-AT91-mci-config.patch;patch=1 \
+ file://at91/0013-atmel_dataflash.c-Status-printout-depend-on-DEBUG.patch;patch=1 \
+ file://at91/0014-AT91-MCI-Add-support-for-SD-Card.patch;patch=1 \
+ file://at91/0015-sam9m10g45ek-Add-configuration-file.patch;patch=1 \
+ "
+
+TARGET_LDFLAGS = ""
+
+inherit base
+
+do_compile () {
+ oe_runmake ${UBOOT_MACHINE}
+ oe_runmake all
+}
+
+SRC_URI[md5sum] = "d94700614225f53c853dfe714eb5fa47"
+SRC_URI[sha256sum] = "066615314fc90a314823ac975ca2a525a51fdad41802f4088a3a21ce073e8de6"
+
--
1.6.3.3
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 4/5] Add X-Windows support for AT91 LCD controller
2010-10-16 12:50 ` [PATCH 3/5] Add u-boot-2009.11 support for AT91SAM9 ulf.samuelsson
@ 2010-10-16 12:50 ` ulf.samuelsson
2010-10-16 12:50 ` [PATCH 5/5] Add X11 images with more multimedia support (mplayer etc.) ulf.samuelsson
0 siblings, 1 reply; 33+ messages in thread
From: ulf.samuelsson @ 2010-10-16 12:50 UTC (permalink / raw)
To: openembedded-devel; +Cc: Ulf Samuelsson
From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
---
.../xserver-kdrive-1.4.0.90/at91sam9-kmode.patch | 18 +++++++++++++++
.../xserver-kdrive-1.4.0.90/wvga-kmode.patch | 16 +++++++++++++
recipes/xorg-xserver/xserver-kdrive_1.4.0.90.bb | 2 +
.../xserver-xorg-conf/at91sam9g45ek/xorg.conf | 23 ++++++++++++++++++++
4 files changed, 59 insertions(+), 0 deletions(-)
create mode 100644 recipes/xorg-xserver/xserver-kdrive-1.4.0.90/at91sam9-kmode.patch
create mode 100644 recipes/xorg-xserver/xserver-kdrive-1.4.0.90/wvga-kmode.patch
create mode 100644 recipes/xorg-xserver/xserver-xorg-conf/at91sam9g45ek/xorg.conf
diff --git a/recipes/xorg-xserver/xserver-kdrive-1.4.0.90/at91sam9-kmode.patch b/recipes/xorg-xserver/xserver-kdrive-1.4.0.90/at91sam9-kmode.patch
new file mode 100644
index 0000000..96d814c
--- /dev/null
+++ b/recipes/xorg-xserver/xserver-kdrive-1.4.0.90/at91sam9-kmode.patch
@@ -0,0 +1,18 @@
+diff -Nru xorg-server-1.4.0.90_orig/hw/kdrive/src/kmode.c xorg-server-1.4.0.90/hw/kdrive/src/kmode.c
+--- xorg-server-1.4.0.90_orig/hw/kdrive/src/kmode.c
++++ xorg-server-1.4.0.90/hw/kdrive/src/kmode.c
+@@ -69,6 +69,12 @@
+ 0, 0, 0, KdSyncNegative,
+ },
+
++ /* at91sam9g45-ekes */
++ { 480, 272, 60, 0, /* VESA */
++ 0, 0, 0, KdSyncNegative, /* 31.469 */
++ 0, 0, 0, KdSyncNegative, /* 59.940 */
++ },
++
+ /* Other VESA modes */
+ { 640, 350, 85, 31500, /* VESA */
+ 32, 96, 192, KdSyncPositive, /* 26.413 */
+
+
diff --git a/recipes/xorg-xserver/xserver-kdrive-1.4.0.90/wvga-kmode.patch b/recipes/xorg-xserver/xserver-kdrive-1.4.0.90/wvga-kmode.patch
new file mode 100644
index 0000000..4b6a1fc
--- /dev/null
+++ b/recipes/xorg-xserver/xserver-kdrive-1.4.0.90/wvga-kmode.patch
@@ -0,0 +1,16 @@
+--- xorg-server-1.4.0.90/hw/kdrive/src/kmode.c.orig
++++ xorg-server-1.4.0.90/hw/kdrive/src/kmode.c
+@@ -75,6 +75,13 @@
+ 0, 0, 0, KdSyncNegative, /* 59.940 */
+ },
+
++ /* at91sam9m10-ekes */
++ { 800, 480, 60, 0,
++ 0, 0, 0, KdSyncNegative,
++ 0, 0, 0, KdSyncNegative,
++ },
++
++
+ /* Other VESA modes */
+ { 640, 350, 85, 31500, /* VESA */
+ 32, 96, 192, KdSyncPositive, /* 26.413 */
diff --git a/recipes/xorg-xserver/xserver-kdrive_1.4.0.90.bb b/recipes/xorg-xserver/xserver-kdrive_1.4.0.90.bb
index 6f329d1..6e2457b 100644
--- a/recipes/xorg-xserver/xserver-kdrive_1.4.0.90.bb
+++ b/recipes/xorg-xserver/xserver-kdrive_1.4.0.90.bb
@@ -28,6 +28,8 @@ SRC_URI = "${XORG_MIRROR}/individual/xserver/xorg-server-${PV}.tar.bz2 \
file://xorg-1.4-kdrive-rotation.patch \
file://split_multiple_AC_SUBST.patch \
file://vm86_masks.patch \
+ file://at91sam9-kmode.patch \
+ file://wvga-kmode.patch \
"
S = "${WORKDIR}/xorg-server-${PV}"
diff --git a/recipes/xorg-xserver/xserver-xorg-conf/at91sam9g45ek/xorg.conf b/recipes/xorg-xserver/xserver-xorg-conf/at91sam9g45ek/xorg.conf
new file mode 100644
index 0000000..0502f87
--- /dev/null
+++ b/recipes/xorg-xserver/xserver-xorg-conf/at91sam9g45ek/xorg.conf
@@ -0,0 +1,23 @@
+Section "ServerLayout"
+ Identifier "default"
+ InputDevice "atmel-tsadcc" "CorePointer"
+EndSection
+
+Section "InputDevice"
+ Identifier "atmel-tsadcc"
+ Driver "evdev"
+ Option "Device" "/dev/input/touchscreen0"
+EndSection
+
+Section "InputDevice"
+ Driver "mouse"
+ Identifier "Mouse[1]"
+ Option "Buttons" "10"
+ Option "Device" "/dev/input/mice"
+EndSection
+
+Section "InputDevice"
+ Driver "kbd"
+ Identifier "Keyboard[0]"
+ Option "Protocol" "Standard"
+EndSection
--
1.6.3.3
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 5/5] Add X11 images with more multimedia support (mplayer etc.)
2010-10-16 12:50 ` [PATCH 4/5] Add X-Windows support for AT91 LCD controller ulf.samuelsson
@ 2010-10-16 12:50 ` ulf.samuelsson
2010-10-18 13:18 ` Marcin Juszkiewicz
0 siblings, 1 reply; 33+ messages in thread
From: ulf.samuelsson @ 2010-10-16 12:50 UTC (permalink / raw)
To: openembedded-devel; +Cc: Ulf Samuelsson
From: Ulf Samuelsson <ulf.samuelsson@atmel.com>
Signed-off-by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
---
recipes/images/console-audio-image.bb | 33 ++++++++++++++++++
recipes/images/x11-at91sam9-image.bb | 58 +++++++++++++++++++++++++++++++++
2 files changed, 91 insertions(+), 0 deletions(-)
create mode 100644 recipes/images/console-audio-image.bb
create mode 100644 recipes/images/x11-at91sam9-image.bb
diff --git a/recipes/images/console-audio-image.bb b/recipes/images/console-audio-image.bb
new file mode 100644
index 0000000..271ebfb
--- /dev/null
+++ b/recipes/images/console-audio-image.bb
@@ -0,0 +1,33 @@
+# Angstrom bootstrap at91sam9 image
+require console-base-image.bb
+
+export IMAGE_BASENAME = "console-at91sam9-image"
+
+IMAGE_PREPROCESS_COMMAND = "create_etc_timestamp"
+
+DEPENDS = "task-base-extended \
+ ${@base_contains("MACHINE_FEATURES", "screen", "psplash-zap", "",d)} \
+ "
+
+IMAGE_INSTALL = "task-base-extended \
+ usbview \
+ mplayer \
+ thttpd \
+ madplay \
+ alsa-utils-aplay \
+ alsa-utils-amixer \
+ iperf \
+ dosfstools \
+ mtd-utils \
+ ${@base_contains("MACHINE_FEATURES", "screen", "psplash-zap", "",d)} \
+ ${IMAGE_EXTRA_INSTALL} \
+# nbench-byte \
+ "
+
+IMAGE_LINGUAS = ""
+
+#we dont need the kernel in the image
+ROOTFS_POSTPROCESS_COMMAND += "rm -f ${IMAGE_ROOTFS}/boot/*Image*; "
+
+inherit image
+
diff --git a/recipes/images/x11-at91sam9-image.bb b/recipes/images/x11-at91sam9-image.bb
new file mode 100644
index 0000000..3917873
--- /dev/null
+++ b/recipes/images/x11-at91sam9-image.bb
@@ -0,0 +1,58 @@
+# Angstrom x11-gpe-image with additional apps included
+XSERVER = "xserver-xorg \
+ xf86-input-evdev \
+ xf86-input-tslib \
+ xf86-video-fbdev "
+
+require x11-gpe-image.bb
+
+export IMAGE_BASENAME = "x11-at91sam9-image"
+
+DEPENDS = "task-base"
+
+IMAGE_INSTALL += "\
+ gpe-calculator \
+ gpe-calendar \
+ gpe-clock \
+ gpe-contacts \
+ gpe-edit \
+ gpe-filemanager \
+ gpe-gallery \
+ gpe-go \
+ gpe-irc \
+ gpe-mixer \
+ gpe-scap \
+ gpe-sketchbook \
+ gpe-terminal \
+ gpe-tetris \
+ gpe-watch \
+ gpe-windowlist \
+ gnome-mplayer \
+ matchbox-panel-hacks \
+ usbview \
+ mplayer \
+ thttpd \
+ madplay \
+ alsa-utils-aplay \
+ alsa-utils-amixer \
+ iperf \
+ fbv \
+ dosfstools \
+ mtd-utils \
+ gpe-mini-browser \
+ tslib-conf \
+ tslib-calibrate \
+ tslib-tests \
+ libstdc++ \
+ ${IMAGE_EXTRA_INSTALL} \
+# nbench-byte \
+# pointercal \
+ "
+
+# IMAGE_LINGUAS += " se no dk fi"
+ROOTFS_POSTPROCESS_COMMAND += "set_image_autologin; "
+ROOTFS_POSTPROCESS_COMMAND += "install_linguas; "
+
+#we dont need the kernel in the image
+ROOTFS_POSTPROCESS_COMMAND += "rm -f ${IMAGE_ROOTFS}/boot/*Image*; "
+
--
1.6.3.3
^ permalink raw reply related [flat|nested] 33+ messages in thread
* Re: [PATCH 5/5] Add X11 images with more multimedia support (mplayer etc.)
2010-10-16 12:50 ` [PATCH 5/5] Add X11 images with more multimedia support (mplayer etc.) ulf.samuelsson
@ 2010-10-18 13:18 ` Marcin Juszkiewicz
2010-10-18 13:46 ` Ulf Samuelsson
0 siblings, 1 reply; 33+ messages in thread
From: Marcin Juszkiewicz @ 2010-10-18 13:18 UTC (permalink / raw)
To: openembedded-devel
Dnia sobota, 16 października 2010 o 14:50:06 ulf.samuelsson@atmel.com
napisał(a):
> +++ b/recipes/images/console-audio-image.bb
> @@ -0,0 +1,33 @@
> +# Angstrom bootstrap at91sam9 image
> +require console-base-image.bb
> +
> +export IMAGE_BASENAME = "console-at91sam9-image"
Please decide - is it audio-image or at91sam9-image... Looks more like second
one because I do not see iperf being related to audio.
> +#we dont need the kernel in the image
> +ROOTFS_POSTPROCESS_COMMAND += "rm -f ${IMAGE_ROOTFS}/boot/*Image*; "
Who is we? I have some boards which needs it...
Regards,
--
JID: hrw@jabber.org
Website: http://marcin.juszkiewicz.com.pl/
LinkedIn: http://www.linkedin.com/in/marcinjuszkiewicz
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-16 12:50 [PATCH 1/5] Use common files for AT91SAM9 configuration ulf.samuelsson
2010-10-16 12:50 ` [PATCH 2/5] Add AT91SAM9 linux-2.6.30 from www.linux4sam.org ulf.samuelsson
@ 2010-10-18 13:20 ` Marcin Juszkiewicz
2010-10-18 13:38 ` Ulf Samuelsson
1 sibling, 1 reply; 33+ messages in thread
From: Marcin Juszkiewicz @ 2010-10-18 13:20 UTC (permalink / raw)
To: openembedded-devel
Dnia sobota, 16 października 2010 o 14:50:02 ulf.samuelsson@atmel.com
napisał(a):
> +++ b/conf/machine/include/at91-2.6.30.inc
> +++ b/conf/machine/include/at91-2.6.32.inc
Do you plan to duplicate that file with each kernel you will produce? Create
include/at91-sam9.inc and put it there.
Regards,
--
JID: hrw@jabber.org
Website: http://marcin.juszkiewicz.com.pl/
LinkedIn: http://www.linkedin.com/in/marcinjuszkiewicz
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-18 13:20 ` [PATCH 1/5] Use common files for AT91SAM9 configuration Marcin Juszkiewicz
@ 2010-10-18 13:38 ` Ulf Samuelsson
2010-10-18 15:36 ` Koen Kooi
0 siblings, 1 reply; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-18 13:38 UTC (permalink / raw)
To: openembedded-devel
Marcin Juszkiewicz skrev:
> Dnia sobota, 16 października 2010 o 14:50:02 ulf.samuelsson@atmel.com
> napisał(a):
>
>> +++ b/conf/machine/include/at91-2.6.30.inc
>> +++ b/conf/machine/include/at91-2.6.32.inc
>
> Do you plan to duplicate that file with each kernel you will produce? Create
> include/at91-sam9.inc and put it there.
>
> Regards,
This is to allow different kernel versions for different AT91 chips.
This allows both a "stable" version, and a development kernel
to be easily handled.
The file defines (amongst other things) the
* kernel version,
* u-boot version
* at91bootstrap version
so you need one file per version.
There are basically two choices.
1) versions in one file per kernel, and functions in a common include file.
2) versions and functions in one file per kernel
I do not see how a single include file will give me this flexibility,
but I am open to suggestions.
Best Regards
Ulf Samuelsson
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 5/5] Add X11 images with more multimedia support (mplayer etc.)
2010-10-18 13:18 ` Marcin Juszkiewicz
@ 2010-10-18 13:46 ` Ulf Samuelsson
0 siblings, 0 replies; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-18 13:46 UTC (permalink / raw)
To: openembedded-devel
Marcin Juszkiewicz skrev:
> Dnia sobota, 16 października 2010 o 14:50:06 ulf.samuelsson@atmel.com
> napisał(a):
>
>> +++ b/recipes/images/console-audio-image.bb
>> @@ -0,0 +1,33 @@
>> +# Angstrom bootstrap at91sam9 image
>> +require console-base-image.bb
>> +
>> +export IMAGE_BASENAME = "console-at91sam9-image"
>
> Please decide - is it audio-image or at91sam9-image... Looks more like second
> one because I do not see iperf being related to audio.
OK, I'll have a look at this.
>
>> +#we dont need the kernel in the image
>> +ROOTFS_POSTPROCESS_COMMAND += "rm -f ${IMAGE_ROOTFS}/boot/*Image*; "
>
> Who is we? I have some boards which needs it...
>
Me an my lice ?
Actually, it is for people that need to create demo on a Windows machine.
The idea is to have an SD-Card with a FAT partition using maybe 128 MB
of the SD-Card, and the rest is empty unpartitioned.
The kernel loads a simple RAMFS and runs a script which will partition
the empty space on the SD-Card, and then extract the file system tarball
from the FAT partition to the new partition.
Since the kernel is needed on the FAT partition, it is not needed
on the Linux file system partition.
Each and every image is made to suit its author.
If there is variation, then this can be easily handled
by editing the file, or by creating a new image.
> Regards,
Best Regards
Ulf Samuelsson
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-18 13:38 ` Ulf Samuelsson
@ 2010-10-18 15:36 ` Koen Kooi
2010-10-18 17:00 ` Frans Meulenbroeks
2010-10-18 17:10 ` Ulf Samuelsson
0 siblings, 2 replies; 33+ messages in thread
From: Koen Kooi @ 2010-10-18 15:36 UTC (permalink / raw)
To: openembedded-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 18-10-10 15:38, Ulf Samuelsson wrote:
> Marcin Juszkiewicz skrev:
>> Dnia sobota, 16 października 2010 o 14:50:02 ulf.samuelsson@atmel.com
>> napisał(a):
>>
>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>
>> Do you plan to duplicate that file with each kernel you will produce?
>> Create include/at91-sam9.inc and put it there.
>>
>> Regards,
>
> This is to allow different kernel versions for different AT91 chips.
> This allows both a "stable" version, and a development kernel
> to be easily handled.
>
> The file defines (amongst other things) the
> * kernel version,
> * u-boot version
> * at91bootstrap version
> so you need one file per version.
NAK! Machines don't get to decide versions! Please revert that commit
and come up with a better way, e.g. default_preference in the recipes or
distro include files.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFMvGmSMkyGM64RGpERAoEpAJwP7tGmHa9mq3bUhbc0WKfwRWJETgCgrd3l
3rfyCWSdNXlK4lIbgpZLMBA=
=2WQm
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-18 15:36 ` Koen Kooi
@ 2010-10-18 17:00 ` Frans Meulenbroeks
2010-10-18 17:16 ` Ulf Samuelsson
2010-10-18 17:10 ` Ulf Samuelsson
1 sibling, 1 reply; 33+ messages in thread
From: Frans Meulenbroeks @ 2010-10-18 17:00 UTC (permalink / raw)
To: openembedded-devel
2010/10/18 Koen Kooi <k.kooi@student.utwente.nl>:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 18-10-10 15:38, Ulf Samuelsson wrote:
>> Marcin Juszkiewicz skrev:
>>> Dnia sobota, 16 października 2010 o 14:50:02 ulf.samuelsson@atmel.com
>>> napisał(a):
>>>
>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>
>>> Do you plan to duplicate that file with each kernel you will produce?
>>> Create include/at91-sam9.inc and put it there.
>>>
>>> Regards,
>>
>> This is to allow different kernel versions for different AT91 chips.
>> This allows both a "stable" version, and a development kernel
>> to be easily handled.
>>
>> The file defines (amongst other things) the
>> * kernel version,
>> * u-boot version
>> * at91bootstrap version
>> so you need one file per version.
>
> NAK! Machines don't get to decide versions! Please revert that commit
> and come up with a better way, e.g. default_preference in the recipes or
> distro include files.
Well machines are probably better capable to decide what u-boot and
kernel version is best for them.
One alternative (which is probably by more yukky) is to create an
kernel-at91 recipe and define PREFERRED_PROVIDER_virtual/kernel
I don't feel that is a better scenario
Frans
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.5 (Darwin)
>
> iD8DBQFMvGmSMkyGM64RGpERAoEpAJwP7tGmHa9mq3bUhbc0WKfwRWJETgCgrd3l
> 3rfyCWSdNXlK4lIbgpZLMBA=
> =2WQm
> -----END PGP SIGNATURE-----
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-18 15:36 ` Koen Kooi
2010-10-18 17:00 ` Frans Meulenbroeks
@ 2010-10-18 17:10 ` Ulf Samuelsson
2010-10-18 19:05 ` Khem Raj
1 sibling, 1 reply; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-18 17:10 UTC (permalink / raw)
To: openembedded-devel
Koen Kooi skrev:
> On 18-10-10 15:38, Ulf Samuelsson wrote:
>> Marcin Juszkiewicz skrev:
>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02 ulf.samuelsson@atmel.com
>>> napisaB(a):
>>>
>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>> Do you plan to duplicate that file with each kernel you will produce?
>>> Create include/at91-sam9.inc and put it there.
>>>
>>> Regards,
>> This is to allow different kernel versions for different AT91 chips.
>> This allows both a "stable" version, and a development kernel
>> to be easily handled.
>
>> The file defines (amongst other things) the
>> * kernel version,
>> * u-boot version
>> * at91bootstrap version
>> so you need one file per version.
>
> NAK! Machines don't get to decide versions! Please revert that commit
> and come up with a better way, e.g. default_preference in the recipes or
> distro include files.
If I look at the machine files, almost all of them provide
a preferred kernel / u-boot. Some also provide version.
The patch will move the definition from the machine file to the include
file for a few board, so reverting the patch will not solve the problem,
just spread it out into multiple files.
The patch also adds some boards.
Having default preference in recipes is not going to make it easy to
switch between version so I don't like that method at all.
Using the distro to select boot and kernel, seems flawed since none of
the stuff will reside in the file system (my file system)
but at least this is easily maintainable.
The best right now seems to be to make a new distro file for each kernel
version, which just includes Angstrom and adds version info for kernel,
u-boot and at91bootstrap.
Long term, I think that there should be something equivalent to DISTRO
for the files outside the file system, and that you should be able to
select between multiple variants like you select a DISTRO today,
but I am not yet into bitbake, so I can't tell where to start.
Since the reversal of the patch, wont solve anything,
I suggest we agree on how to proceed, and then do the fixes.
Is including Angstrom from a kernel specific distro file OK?
If a distro file is to include another file, then
you have to be able to tell different kernels for
I guess we could do:
require conf/distro/include/$(SOC_FAMILY).inc
conf/distro/include/at91.inc would contain:
PREFERRED_VERSION_at91bootstrap = "2.13"
PREFERRED_VERSION_u-boot = "2009.11"
Not sure how to do machine dependent kernel version
PREFERRED_VERSION_linux_at91sam9g45ek = "2.6.30"
does not feel like it would work.
Ideas?
--------------------------------------------
ulf@bulwark:~/Skrivbord/home/projects/OE_atmel/openembedded/conf/machine$
grep PREFERRED_VERSION_linux *
acern30.conf:PREFERRED_VERSION_linux ?= "2.6.14"
at32stk1000.conf:PREFERRED_VERSION_linux = "2.6.28"
at91cap9adk.conf:PREFERRED_VERSION_linux = "2.6.28"
at91-l9260.conf:PREFERRED_VERSION_linux = "2.6.25"
at91sam9260ek.conf:PREFERRED_VERSION_linux = "2.6.28"
at91sam9261ek.conf:PREFERRED_VERSION_linux = "2.6.28"
at91sam9263ek.conf:PREFERRED_VERSION_linux = "2.6.28"
at91sam9rlek.conf:PREFERRED_VERSION_linux = "2.6.28"
canyonlands.conf:PREFERRED_VERSION_linux = "2.6.26"
ea3250.conf:PREFERRED_VERSION_linux-ea3250 = "2.6.27.8"
eee701.conf:PREFERRED_VERSION_linux ?= "2.6.33"
em-x270.conf:PREFERRED_VERSION_linux = "2.6.23"
gesbc-9302.conf:PREFERRED_VERSION_linux ?= "2.6.24"
ghi270.conf:PREFERRED_VERSION_linux-handhelds-2.6 =
"2.6.21-hh11"
jornada6xx.conf:PREFERRED_VERSION_linux-jlime-jornada6xx = "2.6.32"
kixrp435.conf:PREFERRED_VERSION_linux = "2.6.30"
lsmipsel.conf:PREFERRED_VERSION_linux-lsmipsel = "2.6.23.17"
micro2440.conf:# PREFERRED_VERSION_linux = "2.6.29"
n1200.conf:PREFERRED_VERSION_linux-n1200 = "2.6.27-rc9+git"
n2100.conf:PREFERRED_VERSION_linux = "2.6.20"
netvista.conf:PREFERRED_VERSION_linux = "2.6.23"
rx1950.conf:PREFERRED_VERSION_linux = "2.6.35"
sarge-at91.conf:PREFERRED_VERSION_linux = "2.6.21"
stamp9g20evb.conf:PREFERRED_VERSION_linux = "2.6.29"
storcenter.conf:PREFERRED_VERSION_linux-storcenter = "2.6.27.7"
tx25.conf:PREFERRED_VERSION_linux = "2.6.29+2.6.30-rc4"
tx27.conf:PREFERRED_VERSION_linux = "2.6.28"
ulf@bulwark:~/Skrivbord/home/projects/OE_atmel/openembedded/conf/machine$
grep "PREFERRED_PROVIDER_virtual/kernel" *
acern30.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
adsp-bf537-stamp.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-bfin"
adzs-bf538f-ezlite.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-bfin"
adzs-bf548-ezlite.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-bfin"
alix.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
am3517-evm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
am37x-evm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
amsdelta.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-amsdelta-2.6"
archos5.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-archos"
archos5it.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-archos"
asus620.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
asus730.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
at2440evb.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
at32stk1000.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
at91cap9adk.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
at91-l9260.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
at91sam9260ek.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
at91sam9261ek.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
at91sam9263ek.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
at91sam9rlek.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
atngw100.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
aximx50.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
babbage.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
bd-neon.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
beagleboard.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
ben-nanonote.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-jlime-ben"
boc01.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
bug20.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-hah"
bug.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-bug"
calamari.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
canyonlands.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
chumby.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel"
chumby-falconwing.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-imx"
cm-x270.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
cm-x300.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
colinux.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-colinux"
cs-e9302.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
d201gly2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
davinci-sffsdr.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-davinci"
db1200.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
devkitidp-pxa255.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}"
dht-walnut.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-${MACHINE}"
dm37x-evm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
dockstar.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
ea3250.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-ea3250"
eee701.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
efika.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-rt"
efikamx.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-efikamx"
em-x270.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
ep93xx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
epia.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-epia"
er0100.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-er0100"
eseries.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
eteng500.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
eten-m800.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-eten"
fsg3be.conf:PREFERRED_PROVIDER_virtual/kernel ?= "fsg3-kernel"
gamecube.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
geodegx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-geodegx"
geodelx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-geodelx"
gesbc-9302.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
ghi270.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
guinness.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-x86"
h1910.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
h1940.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-h1940"
h2200.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
h3600.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
h3900.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
h4000.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
h5000.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
h6300.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-h6300-omap1"
hipox.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
htcalpine.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
htcapache.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
htcblueangel.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
htcdream.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-leviathan"
htchimalaya.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
htcsable.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
htctornado.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-tornado-omap2"
htcuniversal.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
htcwallaby.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
hx2000.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-rp"
hx4700.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
i586-generic.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
i686-generic.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
iei-nanogx-466.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
igep0020.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-igep2"
imote2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-zigbee"
ion.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
jornada56x.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
jornada6xx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-jlime-jornada6xx"
jornada7xx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-jlime-jornada7xx"
kb9202.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
kilauea.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
kixrp435.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
ks8695.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-${MACHINE}"
lite5200.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
logicpd-pxa270.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}"
looxc550.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
lsmipsel.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-lsmipsel"
m8050.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
magicbox.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-${MACHINE}"
magician.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
mainstone.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-${MACHINE}"
mh355.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
micro2440.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mini2440"
micro2440.conf:# PREFERRED_PROVIDER_virtual/kernel = "linux"
mini2440.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mini2440"
mini6410.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
mnci.conf:PREFERRED_PROVIDER_virtual/kernel = "mnci-ramses"
mp900c.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-jlime-mobilepro900"
mpc8313e-rdb.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
mpc8315e-rdb.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
mpc8323e-rdb.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
mpc8544ds.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
mpc8641-hpcn.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
mtx-1.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mtx-1"
mtx-2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mtx-2"
mtx-3a.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mtx-3a"
mtx-3.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mtx-3"
mx21ads.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel"
mx27ads.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
mx31ads.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
mx31moboard.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
n1200.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-n1200"
n2100.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
native.conf:PREFERRED_PROVIDER_virtual/kernel = "native-kernel"
navman-icn330.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-navman"
neek.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-nios2"
netbook-pro.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel"
netvista.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
neuros-osd2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-neuros"
neuros-osd.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-neuros"
nhk15.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
nokia770.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-nokia800"
nokia800.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-nokia800"
nokia900.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
om-3d7k.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-openmoko-2.6.29"
omap1510inn.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-2.6"
omap1610h2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-2.6"
omap1710h3.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap1"
omap2420h4.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap2"
omap2430sdp.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap2"
omap3evm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
omap3-pandora.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel"
omap3-touchbook.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
omap4430-panda.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap4"
omap5912osk.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
omapzoom2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-zoomsync"
omapzoom36x.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-zoomsync"
omapzoom.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap"
om-gta01.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-openmoko-2.6.29"
om-gta02.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-openmoko-2.6.34"
overo.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
p1020rdb.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
p2020ds.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
palmpre.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-palmpre"
palmtt.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-palm-omap1"
palmz71.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-palm-omap1"
progear.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
qemuarm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
qemumips64.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
qemumips.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
qemumipsel.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
qemuppc.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
qemush4.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
qemux86.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
rb500.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-rb500"
ronetix-pm9261.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
ronetix-pm9263.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
rt3000.conf:PREFERRED_PROVIDER_virtual/kernel = "rt3000"
rx1950.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
rx3000.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
sarge-at91.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
sequoia.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
sgh-i900.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-sgh-i900"
sh7785lcr.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
shark.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-z"
simpad.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
smartq5.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
smartqv7.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
smdk2440.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-smdk2440"
smdk2443.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-smdk2443"
smdk6410.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
stamp9g20evb.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
stb225.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
storcenter.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-storcenter"
sun4cdm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-sun4cdm"
titan.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-titan-sh4"
topas910.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
tqm8540.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
triton.conf:PREFERRED_PROVIDER_virtual/kernel = "triton-kernel"
ts72xx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
tx25.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
tx27.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
wgt634u.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-brcm"
vmware.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
vortex86sx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
wrap.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
wrt54.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-wrt"
x86-32-nocona.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-x86"
x86.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
x86-prescott.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-x86"
x86-uml.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-uml"
xilinx-ml403.conf:#PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx-slab"
xilinx-ml410.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-${MACHINE}"
xilinx-ml507.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx-ml507"
xilinx-virtex4.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx"
xilinx-virtex5.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx"
xo.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-xo"
xxs1500.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-xxs1500"
_______________________________________________
Openembedded-devel mailing list
Openembedded-devel@lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-18 17:00 ` Frans Meulenbroeks
@ 2010-10-18 17:16 ` Ulf Samuelsson
0 siblings, 0 replies; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-18 17:16 UTC (permalink / raw)
To: openembedded-devel
Frans Meulenbroeks skrev:
> 2010/10/18 Koen Kooi <k.kooi@student.utwente.nl>:
> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>>> Marcin Juszkiewicz skrev:
>>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02 ulf.samuelsson@atmel.com
>>>>> napisaB(a):
>>>>>
>>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>>> Do you plan to duplicate that file with each kernel you will produce?
>>>>> Create include/at91-sam9.inc and put it there.
>>>>>
>>>>> Regards,
>>>> This is to allow different kernel versions for different AT91 chips.
>>>> This allows both a "stable" version, and a development kernel
>>>> to be easily handled.
>>>>
>>>> The file defines (amongst other things) the
>>>> * kernel version,
>>>> * u-boot version
>>>> * at91bootstrap version
>>>> so you need one file per version.
> NAK! Machines don't get to decide versions! Please revert that commit
> and come up with a better way, e.g. default_preference in the recipes or
> distro include files.
>
>> Well machines are probably better capable to decide what u-boot and
>> kernel version is best for them.
>> One alternative (which is probably by more yukky) is to create an
>> kernel-at91 recipe and define PREFERRED_PROVIDER_virtual/kernel
>> I don't feel that is a better scenario
>
The advantage of putting the kernel/u-boot/at91bootstrap in the
machine file, is that I can make a copy of a machine file to another
file, change the version of the include file and build.
I dont have to change any files, so nothing existing breaks.
Once everything is tested, I can just replace the old machine file
with the new file and check in.
>> Frans
>
>
>>
>>
_______________________________________________
Openembedded-devel mailing list
Openembedded-devel@lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
BR
Ulf Samuelsson
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-18 17:10 ` Ulf Samuelsson
@ 2010-10-18 19:05 ` Khem Raj
2010-10-18 23:10 ` Ulf Samuelsson
0 siblings, 1 reply; 33+ messages in thread
From: Khem Raj @ 2010-10-18 19:05 UTC (permalink / raw)
To: openembedded-devel
On Mon, Oct 18, 2010 at 10:10 AM, Ulf Samuelsson
<ulf.samuelsson@atmel.com> wrote:
> Koen Kooi skrev:
>> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>> Marcin Juszkiewicz skrev:
>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02 ulf.samuelsson@atmel.com
>>>> napisaB(a):
>>>>
>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>> Do you plan to duplicate that file with each kernel you will produce?
>>>> Create include/at91-sam9.inc and put it there.
>>>>
>>>> Regards,
>>> This is to allow different kernel versions for different AT91 chips.
>>> This allows both a "stable" version, and a development kernel
>>> to be easily handled.
>>
>>> The file defines (amongst other things) the
>>> * kernel version,
>>> * u-boot version
>>> * at91bootstrap version
>>> so you need one file per version.
>>
>> NAK! Machines don't get to decide versions! Please revert that commit
>> and come up with a better way, e.g. default_preference in the recipes or
>> distro include files.
>
> If I look at the machine files, almost all of them provide
> a preferred kernel / u-boot. Some also provide version.
we should avoid pinning versions there. Choosing a type is fine.
>
> The patch will move the definition from the machine file to the include
> file for a few board, so reverting the patch will not solve the problem,
> just spread it out into multiple files.
> The patch also adds some boards.
it pins a kernel version thats not ok IMO. You should pin this in the
kernel recipes
instead for the machines that should use it using PREFERRED_VERSIONS
>
> Having default preference in recipes is not going to make it easy to
> switch between version so I don't like that method at all.
>
what do you mean by easy here ? Its not difficult to change two
priority numbers. I think we should try to remain inline with our
policies
whatever they are otherwise it will create confusion.
>
> Using the distro to select boot and kernel, seems flawed since none of
> the stuff will reside in the file system (my file system)
> but at least this is easily maintainable.
>
usually in OE distros set policy with sufficient knowledge of machine
characteristics
you can think of ways to use this approach. distro does not decide on
which kernel or u-boot
these are machine specific recipes and you decide which one to feed
for which machine in the recipe.
> The best right now seems to be to make a new distro file for each kernel
> version, which just includes Angstrom and adds version info for kernel,
> u-boot and at91bootstrap.
>
> Long term, I think that there should be something equivalent to DISTRO
> for the files outside the file system, and that you should be able to
> select between multiple variants like you select a DISTRO today,
> but I am not yet into bitbake, so I can't tell where to start.
>
> Since the reversal of the patch, wont solve anything,
> I suggest we agree on how to proceed, and then do the fixes.
> Is including Angstrom from a kernel specific distro file OK?
>
> If a distro file is to include another file, then
> you have to be able to tell different kernels for
>
>
> I guess we could do:
>
> require conf/distro/include/$(SOC_FAMILY).inc
>
> conf/distro/include/at91.inc would contain:
>
>
> PREFERRED_VERSION_at91bootstrap = "2.13"
> PREFERRED_VERSION_u-boot = "2009.11"
why is all this needed ?
>
> Not sure how to do machine dependent kernel version
>
> PREFERRED_VERSION_linux_at91sam9g45ek = "2.6.30"
> does not feel like it would work.
> Ideas?
>
>
>
>
> --------------------------------------------
>
> ulf@bulwark:~/Skrivbord/home/projects/OE_atmel/openembedded/conf/machine$
> grep PREFERRED_VERSION_linux *
> acern30.conf:PREFERRED_VERSION_linux ?= "2.6.14"
> at32stk1000.conf:PREFERRED_VERSION_linux = "2.6.28"
> at91cap9adk.conf:PREFERRED_VERSION_linux = "2.6.28"
> at91-l9260.conf:PREFERRED_VERSION_linux = "2.6.25"
> at91sam9260ek.conf:PREFERRED_VERSION_linux = "2.6.28"
> at91sam9261ek.conf:PREFERRED_VERSION_linux = "2.6.28"
> at91sam9263ek.conf:PREFERRED_VERSION_linux = "2.6.28"
> at91sam9rlek.conf:PREFERRED_VERSION_linux = "2.6.28"
> canyonlands.conf:PREFERRED_VERSION_linux = "2.6.26"
> ea3250.conf:PREFERRED_VERSION_linux-ea3250 = "2.6.27.8"
> eee701.conf:PREFERRED_VERSION_linux ?= "2.6.33"
> em-x270.conf:PREFERRED_VERSION_linux = "2.6.23"
> gesbc-9302.conf:PREFERRED_VERSION_linux ?= "2.6.24"
> ghi270.conf:PREFERRED_VERSION_linux-handhelds-2.6 =
> "2.6.21-hh11"
> jornada6xx.conf:PREFERRED_VERSION_linux-jlime-jornada6xx = "2.6.32"
> kixrp435.conf:PREFERRED_VERSION_linux = "2.6.30"
> lsmipsel.conf:PREFERRED_VERSION_linux-lsmipsel = "2.6.23.17"
> micro2440.conf:# PREFERRED_VERSION_linux = "2.6.29"
> n1200.conf:PREFERRED_VERSION_linux-n1200 = "2.6.27-rc9+git"
> n2100.conf:PREFERRED_VERSION_linux = "2.6.20"
> netvista.conf:PREFERRED_VERSION_linux = "2.6.23"
> rx1950.conf:PREFERRED_VERSION_linux = "2.6.35"
> sarge-at91.conf:PREFERRED_VERSION_linux = "2.6.21"
> stamp9g20evb.conf:PREFERRED_VERSION_linux = "2.6.29"
> storcenter.conf:PREFERRED_VERSION_linux-storcenter = "2.6.27.7"
> tx25.conf:PREFERRED_VERSION_linux = "2.6.29+2.6.30-rc4"
> tx27.conf:PREFERRED_VERSION_linux = "2.6.28"
>
>
> ulf@bulwark:~/Skrivbord/home/projects/OE_atmel/openembedded/conf/machine$
> grep "PREFERRED_PROVIDER_virtual/kernel" *
> acern30.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> adsp-bf537-stamp.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-bfin"
> adzs-bf538f-ezlite.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-bfin"
> adzs-bf548-ezlite.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-bfin"
> alix.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> am3517-evm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
> am37x-evm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
> amsdelta.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-amsdelta-2.6"
> archos5.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-archos"
> archos5it.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-archos"
> asus620.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> asus730.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> at2440evb.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> at32stk1000.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> at91cap9adk.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> at91-l9260.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> at91sam9260ek.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> at91sam9261ek.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> at91sam9263ek.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> at91sam9rlek.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> atngw100.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> aximx50.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> babbage.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> bd-neon.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> beagleboard.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
> ben-nanonote.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-jlime-ben"
> boc01.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> bug20.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-hah"
> bug.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-bug"
> calamari.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> canyonlands.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> chumby.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel"
> chumby-falconwing.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-imx"
> cm-x270.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> cm-x300.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> colinux.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-colinux"
> cs-e9302.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> d201gly2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> davinci-sffsdr.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-davinci"
> db1200.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> devkitidp-pxa255.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}"
> dht-walnut.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-${MACHINE}"
> dm37x-evm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
> dockstar.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> ea3250.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-ea3250"
> eee701.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> efika.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-rt"
> efikamx.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-efikamx"
> em-x270.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> ep93xx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> epia.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-epia"
> er0100.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-er0100"
> eseries.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> eteng500.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> eten-m800.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-eten"
> fsg3be.conf:PREFERRED_PROVIDER_virtual/kernel ?= "fsg3-kernel"
> gamecube.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> geodegx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-geodegx"
> geodelx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-geodelx"
> gesbc-9302.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> ghi270.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> guinness.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-x86"
> h1910.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> h1940.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-h1940"
> h2200.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> h3600.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> h3900.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> h4000.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> h5000.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> h6300.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-h6300-omap1"
> hipox.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> htcalpine.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> htcapache.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> htcblueangel.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> htcdream.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-leviathan"
> htchimalaya.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> htcsable.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> htctornado.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-tornado-omap2"
> htcuniversal.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> htcwallaby.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> hx2000.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-rp"
> hx4700.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> i586-generic.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> i686-generic.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> iei-nanogx-466.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> igep0020.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-igep2"
> imote2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-zigbee"
> ion.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> jornada56x.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> jornada6xx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-jlime-jornada6xx"
> jornada7xx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-jlime-jornada7xx"
> kb9202.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> kilauea.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> kixrp435.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> ks8695.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-${MACHINE}"
> lite5200.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> logicpd-pxa270.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}"
> looxc550.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> lsmipsel.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-lsmipsel"
> m8050.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> magicbox.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-${MACHINE}"
> magician.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> mainstone.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-${MACHINE}"
> mh355.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> micro2440.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mini2440"
> micro2440.conf:# PREFERRED_PROVIDER_virtual/kernel = "linux"
> mini2440.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mini2440"
> mini6410.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> mnci.conf:PREFERRED_PROVIDER_virtual/kernel = "mnci-ramses"
> mp900c.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-jlime-mobilepro900"
> mpc8313e-rdb.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> mpc8315e-rdb.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> mpc8323e-rdb.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> mpc8544ds.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> mpc8641-hpcn.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> mtx-1.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mtx-1"
> mtx-2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mtx-2"
> mtx-3a.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mtx-3a"
> mtx-3.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-mtx-3"
> mx21ads.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel"
> mx27ads.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> mx31ads.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> mx31moboard.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> n1200.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-n1200"
> n2100.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> native.conf:PREFERRED_PROVIDER_virtual/kernel = "native-kernel"
> navman-icn330.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-navman"
> neek.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-nios2"
> netbook-pro.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel"
> netvista.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> neuros-osd2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-neuros"
> neuros-osd.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-neuros"
> nhk15.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> nokia770.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-nokia800"
> nokia800.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-nokia800"
> nokia900.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> om-3d7k.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-openmoko-2.6.29"
> omap1510inn.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-2.6"
> omap1610h2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-2.6"
> omap1710h3.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap1"
> omap2420h4.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap2"
> omap2430sdp.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap2"
> omap3evm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
> omap3-pandora.conf:PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel"
> omap3-touchbook.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
> omap4430-panda.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap4"
> omap5912osk.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> omapzoom2.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-zoomsync"
> omapzoom36x.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-zoomsync"
> omapzoom.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap"
> om-gta01.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-openmoko-2.6.29"
> om-gta02.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux-openmoko-2.6.34"
> overo.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
> p1020rdb.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> p2020ds.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> palmpre.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-palmpre"
> palmtt.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-palm-omap1"
> palmz71.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-palm-omap1"
> progear.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> qemuarm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> qemumips64.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> qemumips.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> qemumipsel.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> qemuppc.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> qemush4.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> qemux86.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> rb500.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-rb500"
> ronetix-pm9261.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> ronetix-pm9263.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> rt3000.conf:PREFERRED_PROVIDER_virtual/kernel = "rt3000"
> rx1950.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> rx3000.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
> sarge-at91.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> sequoia.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> sgh-i900.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-sgh-i900"
> sh7785lcr.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> shark.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-z"
> simpad.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> smartq5.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> smartqv7.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> smdk2440.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-smdk2440"
> smdk2443.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-smdk2443"
> smdk6410.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> stamp9g20evb.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> stb225.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> storcenter.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-storcenter"
> sun4cdm.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-sun4cdm"
> titan.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-titan-sh4"
> topas910.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> tqm8540.conf:PREFERRED_PROVIDER_virtual/kernel ?= "linux"
> triton.conf:PREFERRED_PROVIDER_virtual/kernel = "triton-kernel"
> ts72xx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> tx25.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> tx27.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> wgt634u.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-brcm"
> vmware.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> vortex86sx.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> wrap.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> wrt54.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-wrt"
> x86-32-nocona.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-x86"
> x86.conf:PREFERRED_PROVIDER_virtual/kernel = "linux"
> x86-prescott.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-x86"
> x86-uml.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-uml"
> xilinx-ml403.conf:#PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx-slab"
> xilinx-ml410.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-${MACHINE}"
> xilinx-ml507.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx-ml507"
> xilinx-virtex4.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx"
> xilinx-virtex5.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx"
> xo.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-xo"
> xxs1500.conf:PREFERRED_PROVIDER_virtual/kernel = "linux-xxs1500"
>
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-18 19:05 ` Khem Raj
@ 2010-10-18 23:10 ` Ulf Samuelsson
2010-10-18 23:33 ` Khem Raj
2010-10-19 2:30 ` Philip Balister
0 siblings, 2 replies; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-18 23:10 UTC (permalink / raw)
To: openembedded-devel
Khem Raj skrev:
> On Mon, Oct 18, 2010 at 10:10 AM, Ulf Samuelsson
> <ulf.samuelsson@atmel.com> wrote:
>> Koen Kooi skrev:
>>> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>>> Marcin Juszkiewicz skrev:
>>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02 ulf.samuelsson@atmel.com
>>>>> napisaB(a):
>>>>>
>>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>>> Do you plan to duplicate that file with each kernel you will produce?
>>>>> Create include/at91-sam9.inc and put it there.
>>>>>
>>>>> Regards,
>>>> This is to allow different kernel versions for different AT91 chips.
>>>> This allows both a "stable" version, and a development kernel
>>>> to be easily handled.
>>>> The file defines (amongst other things) the
>>>> * kernel version,
>>>> * u-boot version
>>>> * at91bootstrap version
>>>> so you need one file per version.he
>>> NAK! Machines don't get to decide versions! Please revert that commit
>>> and come up with a better way, e.g. default_preference in the recipes or
>>> distro include files.
>> If I look at the machine files, almost all of them provide
>> a preferred kernel / u-boot. Some also provide version.
>
> we should avoid pinning versions there. Choosing a type is fine.
>
Why ?
Is it because it affect rebuild time?
It would be good to understand what problems people see with this.
We are pinning the version to a specific machine, in the kernel recipe.
If we add a new recipe, then we can, by increasing the priority
force a different kernel to be built.
This will not affect anything else.
If the version is in the machine configuration, then a change of
kernel version could force a total rebuild, or?
Any other problem?
BR
Ulf Samuelsson
>> The patch will move the definition from the machine file to the include
>> file for a few board, so reverting the patch will not solve the problem,
>> just spread it out into multiple files.
>> The patch also adds some boards.
>
> it pins a kernel version thats not ok IMO. You should pin this in the
> kernel recipes
> instead for the machines that should use it using PREFERRED_VERSIONS
>
>> Having default preference in recipes is not going to make it easy to
>> switch between version so I don't like that method at all.
>>
>
> what do you mean by easy here ? Its not difficult to change two
> priority numbers. I think we should try to remain inline with our
> policies
> whatever they are otherwise it will create confusion.
>
>> Using the distro to select boot and kernel, seems flawed since none of
>> the stuff will reside in the file system (my file system)
>> but at least this is easily maintainable.
>>
>
> usually in OE distros set policy with sufficient knowledge of machine
> characteristics
> you can think of ways to use this approach. distro does not decide on
> which kernel or u-boot
> these are machine specific recipes and you decide which one to feed
> for which machine in the recipe.
>
>> The best right now seems to be to make a new distro file for each kernel
>> version, which just includes Angstrom and adds version info for kernel,
>> u-boot and at91bootstrap.
>>
>> Long term, I think that there should be something equivalent to DISTRO
>> for the files outside the file system, and that you should be able to
>> select between multiple variants like you select a DISTRO today,
>> but I am not yet into bitbake, so I can't tell where to start.
>>
>> Since the reversal of the patch, wont solve anything,
>> I suggest we agree on how to proceed, and then do the fixes.
>> Is including Angstrom from a kernel specific distro file OK?
>
>
>
>> If a distro file is to include another file, then
>> you have to be able to tell different kernels for
>>
>>
>> I guess we could do:
>>
>> require conf/distro/include/$(SOC_FAMILY).inc
>>
>> conf/distro/include/at91.inc would contain:
>>
>>
>> PREFERRED_VERSION_at91bootstrap = "2.13"
>> PREFERRED_VERSION_u-boot = "2009.11"
>
> why is all this needed ?
>
>> Not sure how to do machine dependent kernel version
>>
>> PREFERRED_VERSION_linux_at91sam9g45ek = "2.6.30"
>> does not feel like it would work.
>> Ideas?
>>
>>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-18 23:10 ` Ulf Samuelsson
@ 2010-10-18 23:33 ` Khem Raj
2010-10-20 23:57 ` Ulf Samuelsson
2010-10-19 2:30 ` Philip Balister
1 sibling, 1 reply; 33+ messages in thread
From: Khem Raj @ 2010-10-18 23:33 UTC (permalink / raw)
To: openembedded-devel
On Mon, Oct 18, 2010 at 4:10 PM, Ulf Samuelsson
<ulf.samuelsson@atmel.com> wrote:
> Khem Raj skrev:
>> On Mon, Oct 18, 2010 at 10:10 AM, Ulf Samuelsson
>> <ulf.samuelsson@atmel.com> wrote:
>>> Koen Kooi skrev:
>>>> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>>>> Marcin Juszkiewicz skrev:
>>>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02 ulf.samuelsson@atmel.com
>>>>>> napisaB(a):
>>>>>>
>>>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>>>> Do you plan to duplicate that file with each kernel you will produce?
>>>>>> Create include/at91-sam9.inc and put it there.
>>>>>>
>>>>>> Regards,
>>>>> This is to allow different kernel versions for different AT91 chips.
>>>>> This allows both a "stable" version, and a development kernel
>>>>> to be easily handled.
>>>>> The file defines (amongst other things) the
>>>>> * kernel version,
>>>>> * u-boot version
>>>>> * at91bootstrap version
>>>>> so you need one file per version.he
>>>> NAK! Machines don't get to decide versions! Please revert that commit
>>>> and come up with a better way, e.g. default_preference in the recipes or
>>>> distro include files.
>>> If I look at the machine files, almost all of them provide
>>> a preferred kernel / u-boot. Some also provide version.
>>
>> we should avoid pinning versions there. Choosing a type is fine.
>>
>
> Why ?
> Is it because it affect rebuild time?
> It would be good to understand what problems people see with this.
Well we have distro which sets policies including which recipe
versions to be pinned
machine configuration decides on various machine features. There are
different ways to do it
but if we remain consistent in what we do, we can make it more
understandable for others
If you feel strongly that your approach is good I think it should be
decided if this is suitable
for majority of OE distro and machines, If it has technical merits
over existing approaches
people will be interested in it.
>
> We are pinning the version to a specific machine, in the kernel recipe.
> If we add a new recipe, then we can, by increasing the priority
> force a different kernel to be built.
> This will not affect anything else.
>
> If the version is in the machine configuration, then a change of
> kernel version could force a total rebuild, or?
>
I dont think it will force any rebuild or anything. It will just not
be the way other machines
do things. The machine configuration tend to be version agnostic as
per current approach.
> Any other problem?
>
what are the issues that you see in following approaches suggested in
this thread so far ?
> BR
> Ulf Samuelsson
>
>
>
>>> The patch will move the definition from the machine file to the include
>>> file for a few board, so reverting the patch will not solve the problem,
>>> just spread it out into multiple files.
>>> The patch also adds some boards.
>>
>> it pins a kernel version thats not ok IMO. You should pin this in the
>> kernel recipes
>> instead for the machines that should use it using PREFERRED_VERSIONS
>>
>>> Having default preference in recipes is not going to make it easy to
>>> switch between version so I don't like that method at all.
>>>
>>
>> what do you mean by easy here ? Its not difficult to change two
>> priority numbers. I think we should try to remain inline with our
>> policies
>> whatever they are otherwise it will create confusion.
>>
>>> Using the distro to select boot and kernel, seems flawed since none of
>>> the stuff will reside in the file system (my file system)
>>> but at least this is easily maintainable.
>>>
>>
>> usually in OE distros set policy with sufficient knowledge of machine
>> characteristics
>> you can think of ways to use this approach. distro does not decide on
>> which kernel or u-boot
>> these are machine specific recipes and you decide which one to feed
>> for which machine in the recipe.
>>
>>> The best right now seems to be to make a new distro file for each kernel
>>> version, which just includes Angstrom and adds version info for kernel,
>>> u-boot and at91bootstrap.
>>>
>>> Long term, I think that there should be something equivalent to DISTRO
>>> for the files outside the file system, and that you should be able to
>>> select between multiple variants like you select a DISTRO today,
>>> but I am not yet into bitbake, so I can't tell where to start.
>>>
>>> Since the reversal of the patch, wont solve anything,
>>> I suggest we agree on how to proceed, and then do the fixes.
>>> Is including Angstrom from a kernel specific distro file OK?
>>
>>
>>
>>> If a distro file is to include another file, then
>>> you have to be able to tell different kernels for
>>>
>>>
>>> I guess we could do:
>>>
>>> require conf/distro/include/$(SOC_FAMILY).inc
>>>
>>> conf/distro/include/at91.inc would contain:
>>>
>>>
>>> PREFERRED_VERSION_at91bootstrap = "2.13"
>>> PREFERRED_VERSION_u-boot = "2009.11"
>>
>> why is all this needed ?
>>
>>> Not sure how to do machine dependent kernel version
>>>
>>> PREFERRED_VERSION_linux_at91sam9g45ek = "2.6.30"
>>> does not feel like it would work.
>>> Ideas?
>>>
>>>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-18 23:10 ` Ulf Samuelsson
2010-10-18 23:33 ` Khem Raj
@ 2010-10-19 2:30 ` Philip Balister
2010-10-19 7:24 ` Frans Meulenbroeks
2010-10-20 23:44 ` Ulf Samuelsson
1 sibling, 2 replies; 33+ messages in thread
From: Philip Balister @ 2010-10-19 2:30 UTC (permalink / raw)
To: openembedded-devel
On 10/18/2010 07:10 PM, Ulf Samuelsson wrote:
> Khem Raj skrev:
>> On Mon, Oct 18, 2010 at 10:10 AM, Ulf Samuelsson
>> <ulf.samuelsson@atmel.com> wrote:
>>> Koen Kooi skrev:
>>>> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>>>> Marcin Juszkiewicz skrev:
>>>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02 ulf.samuelsson@atmel.com
>>>>>> napisaB(a):
>>>>>>
>>>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>>>> Do you plan to duplicate that file with each kernel you will produce?
>>>>>> Create include/at91-sam9.inc and put it there.
>>>>>>
>>>>>> Regards,
>>>>> This is to allow different kernel versions for different AT91 chips.
>>>>> This allows both a "stable" version, and a development kernel
>>>>> to be easily handled.
>>>>> The file defines (amongst other things) the
>>>>> * kernel version,
>>>>> * u-boot version
>>>>> * at91bootstrap version
>>>>> so you need one file per version.he
>>>> NAK! Machines don't get to decide versions! Please revert that commit
>>>> and come up with a better way, e.g. default_preference in the recipes or
>>>> distro include files.
>>> If I look at the machine files, almost all of them provide
>>> a preferred kernel / u-boot. Some also provide version.
>>
>> we should avoid pinning versions there. Choosing a type is fine.
>>
>
> Why ?
> Is it because it affect rebuild time?
> It would be good to understand what problems people see with this.
>
> We are pinning the version to a specific machine, in the kernel recipe.
> If we add a new recipe, then we can, by increasing the priority
> force a different kernel to be built.
> This will not affect anything else.
>
> If the version is in the machine configuration, then a change of
> kernel version could force a total rebuild, or?
>
> Any other problem?
In general, if you pin a version in a machine file, consider what
happens in the case of a distro that supports many machines. Your
machine build one version of something and the other machines build another.
now do an update, upgrade on a package the version you chose may change,
or it may change on the other machines. There are likely some packages
you can pin version in machine files, but in general, it will cause
problems for distros that support more than just one machine at a time.
Philip
>
> BR
> Ulf Samuelsson
>
>
>
>>> The patch will move the definition from the machine file to the include
>>> file for a few board, so reverting the patch will not solve the problem,
>>> just spread it out into multiple files.
>>> The patch also adds some boards.
>>
>> it pins a kernel version thats not ok IMO. You should pin this in the
>> kernel recipes
>> instead for the machines that should use it using PREFERRED_VERSIONS
>>
>>> Having default preference in recipes is not going to make it easy to
>>> switch between version so I don't like that method at all.
>>>
>>
>> what do you mean by easy here ? Its not difficult to change two
>> priority numbers. I think we should try to remain inline with our
>> policies
>> whatever they are otherwise it will create confusion.
>>
>>> Using the distro to select boot and kernel, seems flawed since none of
>>> the stuff will reside in the file system (my file system)
>>> but at least this is easily maintainable.
>>>
>>
>> usually in OE distros set policy with sufficient knowledge of machine
>> characteristics
>> you can think of ways to use this approach. distro does not decide on
>> which kernel or u-boot
>> these are machine specific recipes and you decide which one to feed
>> for which machine in the recipe.
>>
>>> The best right now seems to be to make a new distro file for each kernel
>>> version, which just includes Angstrom and adds version info for kernel,
>>> u-boot and at91bootstrap.
>>>
>>> Long term, I think that there should be something equivalent to DISTRO
>>> for the files outside the file system, and that you should be able to
>>> select between multiple variants like you select a DISTRO today,
>>> but I am not yet into bitbake, so I can't tell where to start.
>>>
>>> Since the reversal of the patch, wont solve anything,
>>> I suggest we agree on how to proceed, and then do the fixes.
>>> Is including Angstrom from a kernel specific distro file OK?
>>
>>
>>
>>> If a distro file is to include another file, then
>>> you have to be able to tell different kernels for
>>>
>>>
>>> I guess we could do:
>>>
>>> require conf/distro/include/$(SOC_FAMILY).inc
>>>
>>> conf/distro/include/at91.inc would contain:
>>>
>>>
>>> PREFERRED_VERSION_at91bootstrap = "2.13"
>>> PREFERRED_VERSION_u-boot = "2009.11"
>>
>> why is all this needed ?
>>
>>> Not sure how to do machine dependent kernel version
>>>
>>> PREFERRED_VERSION_linux_at91sam9g45ek = "2.6.30"
>>> does not feel like it would work.
>>> Ideas?
>>>
>>>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-19 2:30 ` Philip Balister
@ 2010-10-19 7:24 ` Frans Meulenbroeks
2010-10-20 23:44 ` Ulf Samuelsson
1 sibling, 0 replies; 33+ messages in thread
From: Frans Meulenbroeks @ 2010-10-19 7:24 UTC (permalink / raw)
To: openembedded-devel
2010/10/19 Philip Balister <philip@balister.org>:
> On 10/18/2010 07:10 PM, Ulf Samuelsson wrote:
>>
>> Khem Raj skrev:
>>>
>>> On Mon, Oct 18, 2010 at 10:10 AM, Ulf Samuelsson
>>> <ulf.samuelsson@atmel.com> wrote:
>>>>
>>>> Koen Kooi skrev:
>>>>>
>>>>> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>>>>>
>>>>>> Marcin Juszkiewicz skrev:
>>>>>>>
>>>>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02 ulf.samuelsson@atmel.com
>>>>>>> napisaB(a):
>>>>>>>
>>>>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>>>>>
>>>>>>> Do you plan to duplicate that file with each kernel you will produce?
>>>>>>> Create include/at91-sam9.inc and put it there.
>>>>>>>
>>>>>>> Regards,
>>>>>>
>>>>>> This is to allow different kernel versions for different AT91 chips.
>>>>>> This allows both a "stable" version, and a development kernel
>>>>>> to be easily handled.
>>>>>> The file defines (amongst other things) the
>>>>>> * kernel version,
>>>>>> * u-boot version
>>>>>> * at91bootstrap version
>>>>>> so you need one file per version.he
>>>>>
>>>>> NAK! Machines don't get to decide versions! Please revert that commit
>>>>> and come up with a better way, e.g. default_preference in the recipes
>>>>> or
>>>>> distro include files.
>>>>
>>>> If I look at the machine files, almost all of them provide
>>>> a preferred kernel / u-boot. Some also provide version.
>>>
>>> we should avoid pinning versions there. Choosing a type is fine.
>>>
>>
>> Why ?
>> Is it because it affect rebuild time?
>> It would be good to understand what problems people see with this.
>>
>> We are pinning the version to a specific machine, in the kernel recipe.
>> If we add a new recipe, then we can, by increasing the priority
>> force a different kernel to be built.
>> This will not affect anything else.
>>
>> If the version is in the machine configuration, then a change of
>> kernel version could force a total rebuild, or?
>>
>> Any other problem?
>
> In general, if you pin a version in a machine file, consider what happens in
> the case of a distro that supports many machines. Your machine build one
> version of something and the other machines build another.
>
> now do an update, upgrade on a package the version you chose may change, or
> it may change on the other machines. There are likely some packages you can
> pin version in machine files, but in general, it will cause problems for
> distros that support more than just one machine at a time.
>
> Philip
>
It does not cause a problem if it are machine specific recipes (things
like linux, u-boot etc. those which end up in tmp/work/${MACHINE}...
(and actually it seems logical to let the machine decide for those)
It may (and most likely will) cause problems in the way you describe
for the recipes that are arch specific and not machine specific.
One exception: if a pinning applies for *all* systems in the arch.
E.g. for nios2 gcc 4.1.2 is still the only option so pinning it would
cause no damage (but there it has been resolved in a different way)
Frans.
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-19 2:30 ` Philip Balister
2010-10-19 7:24 ` Frans Meulenbroeks
@ 2010-10-20 23:44 ` Ulf Samuelsson
1 sibling, 0 replies; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-20 23:44 UTC (permalink / raw)
To: openembedded-devel
Philip Balister skrev:
> On 10/18/2010 07:10 PM, Ulf Samuelsson wrote:
>> Khem Raj skrev:
>>> On Mon, Oct 18, 2010 at 10:10 AM, Ulf Samuelsson
>>> <ulf.samuelsson@atmel.com> wrote:
>>>> Koen Kooi skrev:
>>>>> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>>>>> Marcin Juszkiewicz skrev:
>>>>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02
>>>>>>> ulf.samuelsson@atmel.com
>>>>>>> napisaB(a):
>>>>>>>
>>>>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>>>>> Do you plan to duplicate that file with each kernel you will
>>>>>>> produce?
>>>>>>> Create include/at91-sam9.inc and put it there.
>>>>>>>
>>>>>>> Regards,
>>>>>> This is to allow different kernel versions for different AT91 chips.
>>>>>> This allows both a "stable" version, and a development kernel
>>>>>> to be easily handled.
>>>>>> The file defines (amongst other things) the
>>>>>> * kernel version,
>>>>>> * u-boot version
>>>>>> * at91bootstrap version
>>>>>> so you need one file per version.he
>>>>> NAK! Machines don't get to decide versions! Please revert that commit
>>>>> and come up with a better way, e.g. default_preference in the
>>>>> recipes or
>>>>> distro include files.
>>>> If I look at the machine files, almost all of them provide
>>>> a preferred kernel / u-boot. Some also provide version.
>>>
>>> we should avoid pinning versions there. Choosing a type is fine.
>>>
>>
>> Why ?
>> Is it because it affect rebuild time?
>> It would be good to understand what problems people see with this.
>>
>> We are pinning the version to a specific machine, in the kernel recipe.
>> If we add a new recipe, then we can, by increasing the priority
>> force a different kernel to be built.
>> This will not affect anything else.
>>
>> If the version is in the machine configuration, then a change of
>> kernel version could force a total rebuild, or?
>>
>> Any other problem?
>
> In general, if you pin a version in a machine file, consider what
> happens in the case of a distro that supports many machines. Your
> machine build one version of something and the other machines build
> another.
>
> now do an update, upgrade on a package the version you chose may change,
> or it may change on the other machines. There are likely some packages
> you can pin version in machine files, but in general, it will cause
> problems for distros that support more than just one machine at a time.
>
> Philip
We are only talking about the kernel/u-boot/at91bootstrap.
Not any arbitrary applications.
I do agree that the distro should handle versioning for the normal file
system.
BR
Ulf Samuelsson
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-18 23:33 ` Khem Raj
@ 2010-10-20 23:57 ` Ulf Samuelsson
2010-10-21 6:00 ` Khem Raj
2010-10-21 8:11 ` Koen Kooi
0 siblings, 2 replies; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-20 23:57 UTC (permalink / raw)
To: openembedded-devel
Khem Raj skrev:
> On Mon, Oct 18, 2010 at 4:10 PM, Ulf Samuelsson
> <ulf.samuelsson@atmel.com> wrote:
>> Khem Raj skrev:
>>> On Mon, Oct 18, 2010 at 10:10 AM, Ulf Samuelsson
>>> <ulf.samuelsson@atmel.com> wrote:
>>>> Koen Kooi skrev:
>>>>> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>>>>> Marcin Juszkiewicz skrev:
>>>>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02 ulf.samuelsson@atmel.com
>>>>>>> napisaB(a):
>>>>>>>
>>>>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>>>>> Do you plan to duplicate that file with each kernel you will produce?
>>>>>>> Create include/at91-sam9.inc and put it there.
>>>>>>>
>>>>>>> Regards,
>>>>>> This is to allow different kernel versions for different AT91 chips.
>>>>>> This allows both a "stable" version, and a development kernel
>>>>>> to be easily handled.
>>>>>> The file defines (amongst other things) the
>>>>>> * kernel version,
>>>>>> * u-boot version
>>>>>> * at91bootstrap version
>>>>>> so you need one file per version.he
>>>>> NAK! Machines don't get to decide versions! Please revert that commit
>>>>> and come up with a better way, e.g. default_preference in the recipes or
>>>>> distro include files.
>>>> If I look at the machine files, almost all of them provide
>>>> a preferred kernel / u-boot. Some also provide version.
>>> we should avoid pinning versions there. Choosing a type is fine.
>>>
>> Why ?
>> Is it because it affect rebuild time?
>> It would be good to understand what problems people see with this.
>
> Well we have distro which sets policies including which recipe
> versions to be pinned
> machine configuration decides on various machine features. There are
> different ways to do it
> but if we remain consistent in what we do, we can make it more
> understandable for others
>
> If you feel strongly that your approach is good I think it should be
> decided if this is suitable
> for majority of OE distro and machines, If it has technical merits
> over existing approaches
> people will be interested in it.
>
>> We are pinning the version to a specific machine, in the kernel recipe.
>> If we add a new recipe, then we can, by increasing the priority
>> force a different kernel to be built.
>> This will not affect anything else.
>>
>> If the version is in the machine configuration, then a change of
>> kernel version could force a total rebuild, or?
>>
>
> I dont think it will force any rebuild or anything. It will just not
> be the way other machines
> do things. The machine configuration tend to be version agnostic as
> per current approach.
>
>> Any other problem?
>>
>
> what are the issues that you see in following approaches suggested in
> this thread so far ?
1) Many boards do put kernel version in the machine conf file.
The patch was created to collect common stuff in an include file
to make maintenance easier.
2) I cannot assume that all Atmel chips should use the same kernel,
so a single include file will not make it.
3) I want to be able to work with two kernel versions for the same chip.
This is to have one stable kernel, and one development kernel.
The use of the develoment kernel, should not make the stable version
unbuildable.
If I put the preferred version in the recipe, then I can only work
with one kernel.
If I try to use the preferred version in the recipe, then I
have to have two machine files.
I.E:
at91sam9g45ek
at91sam9g45ek-devel
and I have to support both machines in the recipe.
Once I have come to a point, where the development kernel is
to become the stable version, then I have to edit the recipe
again to make this the official.
I have to remove all references to "sam9g45ek",
then I have to modify the "sam9g45ek-devel" settings to refer to
"sam9g45ek", remove the sam9g45ek.conf and rename the
sam9g45ek-devel.conf to sam9g45ek.conf.
I then have to retest everything!
As I see it, the kernel/u-boot/at91bootstrap hangs together,
and it is easier to maintain a single include file with versions
for this, than to maintain the three recipes.
If I maintain in the recipes, I have to create a lot
of preferred_version_<machine>) in multiple kernel recipes,
and with my method, I include a single file in the machine
configuration.
If I want to change kernel version, I edit a few characters.
4. This points to another weakness.
You can only build a certain machine in one way.
Today, when we specify a MACHINE, we use "$MACHINE.conf"
It would be better, if you could have several machine configuration
files referring to the same MACHINE, and specifying the MACHINE
in the configuration file.
local.conf would then contain
MACHINE_CONFIG = at91sam9g45ek-2.6.30.conf
"at91sam9g45ek-2.6.30.conf" would contain
MACHINE = at91sam9g45ek
This would allow several configuration files referring to the same
machine.
The machine configuration must support selecting separate
* linux ".config"
* uboot configuration
* boot monitor configuration.
Possibly, then machine configuration should support downloading such
stuff from internet.
(I don't expect the mainline OE to contain more than one "stable"
version)
BR
Ulf
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-20 23:57 ` Ulf Samuelsson
@ 2010-10-21 6:00 ` Khem Raj
2010-10-25 15:38 ` Ulf Samuelsson
2010-10-21 8:11 ` Koen Kooi
1 sibling, 1 reply; 33+ messages in thread
From: Khem Raj @ 2010-10-21 6:00 UTC (permalink / raw)
To: openembedded-devel
On Wed, Oct 20, 2010 at 4:57 PM, Ulf Samuelsson
<ulf.samuelsson@atmel.com> wrote:
> Khem Raj skrev:
>>
>> On Mon, Oct 18, 2010 at 4:10 PM, Ulf Samuelsson
>> <ulf.samuelsson@atmel.com> wrote:
>>>
>>> Khem Raj skrev:
>>>>
>>>> On Mon, Oct 18, 2010 at 10:10 AM, Ulf Samuelsson
>>>> <ulf.samuelsson@atmel.com> wrote:
>>>>>
>>>>> Koen Kooi skrev:
>>>>>>
>>>>>> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>>>>>>
>>>>>>> Marcin Juszkiewicz skrev:
>>>>>>>>
>>>>>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02
>>>>>>>> ulf.samuelsson@atmel.com
>>>>>>>> napisaB(a):
>>>>>>>>
>>>>>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>>>>>>
>>>>>>>> Do you plan to duplicate that file with each kernel you will
>>>>>>>> produce?
>>>>>>>> Create include/at91-sam9.inc and put it there.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>
>>>>>>> This is to allow different kernel versions for different AT91 chips.
>>>>>>> This allows both a "stable" version, and a development kernel
>>>>>>> to be easily handled.
>>>>>>> The file defines (amongst other things) the
>>>>>>> * kernel version,
>>>>>>> * u-boot version
>>>>>>> * at91bootstrap version
>>>>>>> so you need one file per version.he
>>>>>>
>>>>>> NAK! Machines don't get to decide versions! Please revert that commit
>>>>>> and come up with a better way, e.g. default_preference in the recipes
>>>>>> or
>>>>>> distro include files.
>>>>>
>>>>> If I look at the machine files, almost all of them provide
>>>>> a preferred kernel / u-boot. Some also provide version.
>>>>
>>>> we should avoid pinning versions there. Choosing a type is fine.
>>>>
>>> Why ?
>>> Is it because it affect rebuild time?
>>> It would be good to understand what problems people see with this.
>>
>> Well we have distro which sets policies including which recipe
>> versions to be pinned
>> machine configuration decides on various machine features. There are
>> different ways to do it
>> but if we remain consistent in what we do, we can make it more
>> understandable for others
>>
>> If you feel strongly that your approach is good I think it should be
>> decided if this is suitable
>> for majority of OE distro and machines, If it has technical merits
>> over existing approaches
>> people will be interested in it.
>>
>>> We are pinning the version to a specific machine, in the kernel recipe.
>>> If we add a new recipe, then we can, by increasing the priority
>>> force a different kernel to be built.
>>> This will not affect anything else.
>>>
>>> If the version is in the machine configuration, then a change of
>>> kernel version could force a total rebuild, or?
>>>
>>
>> I dont think it will force any rebuild or anything. It will just not
>> be the way other machines
>> do things. The machine configuration tend to be version agnostic as
>> per current approach.
>>
>>> Any other problem?
>>>
>>
>> what are the issues that you see in following approaches suggested in
>> this thread so far ?
>
> 1) Many boards do put kernel version in the machine conf file.
> The patch was created to collect common stuff in an include file
> to make maintenance easier.
>
> 2) I cannot assume that all Atmel chips should use the same kernel,
> so a single include file will not make it.
>
> 3) I want to be able to work with two kernel versions for the same chip.
> This is to have one stable kernel, and one development kernel.
> The use of the develoment kernel, should not make the stable version
> unbuildable.
you want to ship with two kernel or you want to work with two kernel versions?
if you just want to develop then you can have the stable kernel
version as preferred version
and override that in local.conf with yout dev kernel for development
purposes. Once you are
done with it and it is your next stable just add
DEFAULT_PREFERENCE_<machine> = "1" in that recipe
and it should become new default for this machine.
for release you can create your own pinned config file and call it
inside distro config you have
and have two distros one for dev and one for stable
>
> If I put the preferred version in the recipe, then I can only work
> with one kernel.
>
> If I try to use the preferred version in the recipe, then I
> have to have two machine files.
> I.E:
> at91sam9g45ek
> at91sam9g45ek-devel
>
> and I have to support both machines in the recipe.
>
> Once I have come to a point, where the development kernel is
> to become the stable version, then I have to edit the recipe
> again to make this the official.
> I have to remove all references to "sam9g45ek",
> then I have to modify the "sam9g45ek-devel" settings to refer to
> "sam9g45ek", remove the sam9g45ek.conf and rename the
> sam9g45ek-devel.conf to sam9g45ek.conf.
>
> I then have to retest everything!
>
> As I see it, the kernel/u-boot/at91bootstrap hangs together,
> and it is easier to maintain a single include file with versions
> for this, than to maintain the three recipes.
>
> If I maintain in the recipes, I have to create a lot
> of preferred_version_<machine>) in multiple kernel recipes,
> and with my method, I include a single file in the machine
> configuration.
> If I want to change kernel version, I edit a few characters.
>
> 4. This points to another weakness.
> You can only build a certain machine in one way.
>
> Today, when we specify a MACHINE, we use "$MACHINE.conf"
>
> It would be better, if you could have several machine configuration
> files referring to the same MACHINE, and specifying the MACHINE
> in the configuration file.
>
> local.conf would then contain
>
> MACHINE_CONFIG = at91sam9g45ek-2.6.30.conf
>
> "at91sam9g45ek-2.6.30.conf" would contain
>
> MACHINE = at91sam9g45ek
>
> This would allow several configuration files referring to the same
> machine.
> The machine configuration must support selecting separate
> * linux ".config"
> * uboot configuration
> * boot monitor configuration.
why not use existing MACHINE_FEATURES to steer the features you would
like to change in .config files.
> Possibly, then machine configuration should support downloading such
> stuff from internet.
>
> (I don't expect the mainline OE to contain more than one "stable"
> version)
>
>
> BR
> Ulf
>
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-20 23:57 ` Ulf Samuelsson
2010-10-21 6:00 ` Khem Raj
@ 2010-10-21 8:11 ` Koen Kooi
2010-10-21 8:43 ` Frans Meulenbroeks
1 sibling, 1 reply; 33+ messages in thread
From: Koen Kooi @ 2010-10-21 8:11 UTC (permalink / raw)
To: openembedded-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 21-10-10 01:57, Ulf Samuelsson wrote:
> 1) Many boards do put kernel version in the machine conf file.
And they all shouldn't be doing that. I'll remove everyone of those
later today.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFMv/WWMkyGM64RGpERAgr5AJsH+AY+hkvd0feTxYW+Ce2rAe77DgCdE87U
A5KFOyS45+AIPlC3oNO50w0=
=iQY+
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-21 8:11 ` Koen Kooi
@ 2010-10-21 8:43 ` Frans Meulenbroeks
2010-10-21 9:25 ` Koen Kooi
0 siblings, 1 reply; 33+ messages in thread
From: Frans Meulenbroeks @ 2010-10-21 8:43 UTC (permalink / raw)
To: openembedded-devel
2010/10/21 Koen Kooi <k.kooi@student.utwente.nl>:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 21-10-10 01:57, Ulf Samuelsson wrote:
>
>> 1) Many boards do put kernel version in the machine conf file.
>
> And they all shouldn't be doing that. I'll remove everyone of those
> later today.
I don't think you can do that without consulting the machine maintainers.
From the commit policy:
* Machine configs are less sensitive but machine maintainers should be
consulted where present and known
Also i feel a review and some time to let people adapt to it is useful.
Some distro's might (right or wrong) rely on the pinning that is done
by the machine, so removing the pinnings without any notice could
seriously break stuff for others.
From someone who complained before about others removing things or
touching "his" recipe, I expect also respect for the work and position
of others.
Frans.
PS: my opinion is that machine maintainers generally know better what
kernel works best for their machines than distro owners; they also
"own" the defconfig file
We have linux*/${MACHINE}/defconfig files, but not
linux*/${DISTRO}/defconfig files.
PPS: what's next? removing the PREFERRED_PROVIDER_virtual/kernel from
the machine configs because you feel you know better ?
Thinking of it: why not allow a machine to set its PREFERRED version
and provider and override that within the distro, should a distro
decide it wants something else?
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-21 8:43 ` Frans Meulenbroeks
@ 2010-10-21 9:25 ` Koen Kooi
2010-10-21 9:53 ` Frans Meulenbroeks
2010-10-21 22:01 ` Ulf Samuelsson
0 siblings, 2 replies; 33+ messages in thread
From: Koen Kooi @ 2010-10-21 9:25 UTC (permalink / raw)
To: openembedded-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 21-10-10 10:43, Frans Meulenbroeks wrote:
> PS: my opinion is that machine maintainers generally know better what
> kernel works best for their machines than distro owners;
And what's stopping them to put DEFAULT_PREFERENCE_machine and
COMPATIBLE_MACHINE in the kernel recipes?
There is no technical reason for setting it in machine.conf, so why
should we break the orthogonality for that?
> PPS: what's next? removing the PREFERRED_PROVIDER_virtual/kernel from
> the machine configs because you feel you know better ?
That is actually an option these days since most kernel recipes set
COMPATIBLE_MACHINE correctly :)
But seriously, there are use cases for one distro to use a different
kernel for a given machine for whatever reasons.
This whole situation is a mess because recipes/linux is a mess. It would
be a nice topic for OEDEM to see if we should switch to a poky BSP
model. It would boils down to:
1 bblayer per machine or SOC_FAMILY containing:
* machine.conf
* first and second stage bootloaders
* kernel
I can see some serious issues with that, but that's for another thread
to discuss.
regards,
Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFMwAb7MkyGM64RGpERAuYSAKCaGnOasoXFk0Cb9xvcASP211PU0gCfaacw
850xksIBon0+M5P9rbt4mOo=
=5mO/
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-21 9:25 ` Koen Kooi
@ 2010-10-21 9:53 ` Frans Meulenbroeks
2010-10-21 22:01 ` Ulf Samuelsson
1 sibling, 0 replies; 33+ messages in thread
From: Frans Meulenbroeks @ 2010-10-21 9:53 UTC (permalink / raw)
To: openembedded-devel
2010/10/21 Koen Kooi <k.kooi@student.utwente.nl>:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 21-10-10 10:43, Frans Meulenbroeks wrote:
>
>> PS: my opinion is that machine maintainers generally know better what
>> kernel works best for their machines than distro owners;
>
> And what's stopping them to put DEFAULT_PREFERENCE_machine and
> COMPATIBLE_MACHINE in the kernel recipes?
> There is no technical reason for setting it in machine.conf, so why
> should we break the orthogonality for that?
I have no problems with that. We could start a migration process to
achieve that. Guess the machine maintainers should be involved (and if
no maintainer is known, i feel the machine should either get a new
maintainer otherwise we should seriously consider whether we want to
keep the machine).
Then again on the other hand it would be nice to have all machine
specifics in one place (which is an argument for machine.conf), but of
course the distro should be able to override that.
>
>> PPS: what's next? removing the PREFERRED_PROVIDER_virtual/kernel from
>> the machine configs because you feel you know better ?
>
> That is actually an option these days since most kernel recipes set
> COMPATIBLE_MACHINE correctly :)
> But seriously, there are use cases for one distro to use a different
> kernel for a given machine for whatever reasons.
Agree. I am not saying the distro should blindly follow the machine,
the distro should have the ultimate control of what goes in the
distro, but I feel it is up to the machine maintainer to come with a
set of sensible defaults for that machine (which are applied if the
distro uses the default setting)
>
> This whole situation is a mess because recipes/linux is a mess. It would
Agree!
In a lesser case it also applies for u-boot (where some of the
messiness is hidden in the uboot-git recipe)
> be a nice topic for OEDEM to see if we should switch to a poky BSP
> model. It would boils down to:
>
> 1 bblayer per machine or SOC_FAMILY containing:
> * machine.conf
> * first and second stage bootloaders
> * kernel
>
> I can see some serious issues with that, but that's for another thread
> to discuss.
>
> regards,
>
> Koen
Enjoy, Frans.
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-21 9:25 ` Koen Kooi
2010-10-21 9:53 ` Frans Meulenbroeks
@ 2010-10-21 22:01 ` Ulf Samuelsson
2010-10-22 6:28 ` Frans Meulenbroeks
1 sibling, 1 reply; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-21 22:01 UTC (permalink / raw)
To: openembedded-devel
Koen Kooi skrev:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 21-10-10 10:43, Frans Meulenbroeks wrote:
>
>> PS: my opinion is that machine maintainers generally know better what
>> kernel works best for their machines than distro owners;
>
> And what's stopping them to put DEFAULT_PREFERENCE_machine and
> COMPATIBLE_MACHINE in the kernel recipes?
> There is no technical reason for setting it in machine.conf, so why
> should we break the orthogonality for that?
>
>> PPS: what's next? removing the PREFERRED_PROVIDER_virtual/kernel from
>> the machine configs because you feel you know better ?
>
> That is actually an option these days since most kernel recipes set
> COMPATIBLE_MACHINE correctly :)
> But seriously, there are use cases for one distro to use a different
> kernel for a given machine for whatever reasons.
>
> This whole situation is a mess because recipes/linux is a mess. It would
> be a nice topic for OEDEM to see if we should switch to a poky BSP
> model. It would boils down to:
>
> 1 bblayer per machine or SOC_FAMILY containing:
> * machine.conf
> * first and second stage bootloaders
> * kernel
I have already come to the conclusion that we could have a single
linux.bb recipe.
This assumes that you define things like KERNEL_VERSION, SOC_FAMILY
etc. outside the recipe and then include files with include filenames
containing approproate ENVIRONMENT variables.
I.E:
include $(KERNEL_VERSION)/kernel_source
include $(SOC_FAMILY)/$(KERNEL_VERSION)/kernel_patch
etc.
>
> I can see some serious issues with that, but that's for another thread
> to discuss.
>
> regards,
>
> Koen
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.5 (Darwin)
>
> iD8DBQFMwAb7MkyGM64RGpERAuYSAKCaGnOasoXFk0Cb9xvcASP211PU0gCfaacw
> 850xksIBon0+M5P9rbt4mOo=
> =5mO/
> -----END PGP SIGNATURE-----
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
BR
Ulf Samuelsson
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-21 22:01 ` Ulf Samuelsson
@ 2010-10-22 6:28 ` Frans Meulenbroeks
2010-10-25 15:35 ` Ulf Samuelsson
0 siblings, 1 reply; 33+ messages in thread
From: Frans Meulenbroeks @ 2010-10-22 6:28 UTC (permalink / raw)
To: openembedded-devel
2010/10/22 Ulf Samuelsson <ulf.samuelsson@atmel.com>:
> Koen Kooi skrev:
>>
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> On 21-10-10 10:43, Frans Meulenbroeks wrote:
>>
>>> PS: my opinion is that machine maintainers generally know better what
>>> kernel works best for their machines than distro owners;
>>
>> And what's stopping them to put DEFAULT_PREFERENCE_machine and
>> COMPATIBLE_MACHINE in the kernel recipes?
>> There is no technical reason for setting it in machine.conf, so why
>> should we break the orthogonality for that?
>>
>>> PPS: what's next? removing the PREFERRED_PROVIDER_virtual/kernel from
>>> the machine configs because you feel you know better ?
>>
>> That is actually an option these days since most kernel recipes set
>> COMPATIBLE_MACHINE correctly :)
>> But seriously, there are use cases for one distro to use a different
>> kernel for a given machine for whatever reasons.
>>
>> This whole situation is a mess because recipes/linux is a mess. It would
>> be a nice topic for OEDEM to see if we should switch to a poky BSP
>> model. It would boils down to:
>>
>> 1 bblayer per machine or SOC_FAMILY containing:
>> * machine.conf
>> * first and second stage bootloaders
>> * kernel
>
> I have already come to the conclusion that we could have a single linux.bb
> recipe.
>
> This assumes that you define things like KERNEL_VERSION, SOC_FAMILY
> etc. outside the recipe and then include files with include filenames
> containing approproate ENVIRONMENT variables.
>
> I.E:
> include $(KERNEL_VERSION)/kernel_source
> include $(SOC_FAMILY)/$(KERNEL_VERSION)/kernel_patch
>
> etc.
>
Isn't that what kernel.bbclass is about ?
Wrt your example:
instead of
include $(KERNEL_VERSION)/kernel_source
you could say:
at the place where you define kernel_source:
SRC_URI = "..."
Basically what you propose is kind of a template.
Frans
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-22 6:28 ` Frans Meulenbroeks
@ 2010-10-25 15:35 ` Ulf Samuelsson
0 siblings, 0 replies; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-25 15:35 UTC (permalink / raw)
To: openembedded-devel
Frans Meulenbroeks skrev:
> 2010/10/22 Ulf Samuelsson <ulf.samuelsson@atmel.com>:
>> Koen Kooi skrev:
>>> -----BEGIN PGP SIGNED MESSAGE-----
>>> Hash: SHA1
>>>
>>> On 21-10-10 10:43, Frans Meulenbroeks wrote:
>>>
>>>> PS: my opinion is that machine maintainers generally know better what
>>>> kernel works best for their machines than distro owners;
>>> And what's stopping them to put DEFAULT_PREFERENCE_machine and
>>> COMPATIBLE_MACHINE in the kernel recipes?
>>> There is no technical reason for setting it in machine.conf, so why
>>> should we break the orthogonality for that?
>>>
>>>> PPS: what's next? removing the PREFERRED_PROVIDER_virtual/kernel from
>>>> the machine configs because you feel you know better ?
>>> That is actually an option these days since most kernel recipes set
>>> COMPATIBLE_MACHINE correctly :)
>>> But seriously, there are use cases for one distro to use a different
>>> kernel for a given machine for whatever reasons.
>>>
>>> This whole situation is a mess because recipes/linux is a mess. It would
>>> be a nice topic for OEDEM to see if we should switch to a poky BSP
>>> model. It would boils down to:
>>>
>>> 1 bblayer per machine or SOC_FAMILY containing:
>>> * machine.conf
>>> * first and second stage bootloaders
>>> * kernel
>> I have already come to the conclusion that we could have a single linux.bb
>> recipe.
>>
>> This assumes that you define things like KERNEL_VERSION, SOC_FAMILY
>> etc. outside the recipe and then include files with include filenames
>> containing approproate ENVIRONMENT variables.
>>
>> I.E:
>> include $(KERNEL_VERSION)/kernel_source
>> include $(SOC_FAMILY)/$(KERNEL_VERSION)/kernel_patch
>>
>> etc.
>>
>
> Isn't that what kernel.bbclass is about ?
>
> Wrt your example:
> instead of
> include $(KERNEL_VERSION)/kernel_source
> you could say:
> at the place where you define kernel_source:
> SRC_URI = "..."
>
> Basically what you propose is kind of a template.
>
Didn't study kernel.bbclass.
A problem with this approach, is that different kernel version
are located in different directories.
http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.36-rc8.tar.gz
http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.36.tar.bz2
If we want to have a single linux.bb file, then it
seems to be cleaner to have an include file per kernel version which
specifies both the directory and the file name.
$(KERNEL_VERSION)/kernel_source would then contain
SRC_URI =
"http://www.kernel.org/pub/linux/kernel/v2.6/linux-$(KERNEL_VERSION).tar.bz2"
for a stable kernel, and
SRC_URI =
"http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-$(KERNEL_VERSION).tar.bz2"
for a release candidate.
One this file is created for a kernel version, it would require little
or no maintenance.
Similar files in the SOC_FAMILY directory structure would control which
minor patch as well as other architecture specific patches to be added.
> Frans
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-21 6:00 ` Khem Raj
@ 2010-10-25 15:38 ` Ulf Samuelsson
2010-10-25 17:56 ` Khem Raj
0 siblings, 1 reply; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-25 15:38 UTC (permalink / raw)
To: openembedded-devel
Khem Raj skrev:
> On Wed, Oct 20, 2010 at 4:57 PM, Ulf Samuelsson
> <ulf.samuelsson@atmel.com> wrote:
>> Khem Raj skrev:
>>> On Mon, Oct 18, 2010 at 4:10 PM, Ulf Samuelsson
>>> <ulf.samuelsson@atmel.com> wrote:
>>>> Khem Raj skrev:
>>>>> On Mon, Oct 18, 2010 at 10:10 AM, Ulf Samuelsson
>>>>> <ulf.samuelsson@atmel.com> wrote:
>>>>>> Koen Kooi skrev:
>>>>>>> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>>>>>>> Marcin Juszkiewicz skrev:
>>>>>>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02
>>>>>>>>> ulf.samuelsson@atmel.com
>>>>>>>>> napisaB(a):
>>>>>>>>>
>>>>>>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>>>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>>>>>>> Do you plan to duplicate that file with each kernel you will
>>>>>>>>> produce?
>>>>>>>>> Create include/at91-sam9.inc and put it there.
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>> This is to allow different kernel versions for different AT91 chips.
>>>>>>>> This allows both a "stable" version, and a development kernel
>>>>>>>> to be easily handled.
>>>>>>>> The file defines (amongst other things) the
>>>>>>>> * kernel version,
>>>>>>>> * u-boot version
>>>>>>>> * at91bootstrap version
>>>>>>>> so you need one file per version.he
>>>>>>> NAK! Machines don't get to decide versions! Please revert that commit
>>>>>>> and come up with a better way, e.g. default_preference in the recipes
>>>>>>> or
>>>>>>> distro include files.
>>>>>> If I look at the machine files, almost all of them provide
>>>>>> a preferred kernel / u-boot. Some also provide version.
>>>>> we should avoid pinning versions there. Choosing a type is fine.
>>>>>
>>>> Why ?
>>>> Is it because it affect rebuild time?
>>>> It would be good to understand what problems people see with this.
>>> Well we have distro which sets policies including which recipe
>>> versions to be pinned
>>> machine configuration decides on various machine features. There are
>>> different ways to do it
>>> but if we remain consistent in what we do, we can make it more
>>> understandable for others
>>>
>>> If you feel strongly that your approach is good I think it should be
>>> decided if this is suitable
>>> for majority of OE distro and machines, If it has technical merits
>>> over existing approaches
>>> people will be interested in it.
>>>
>>>> We are pinning the version to a specific machine, in the kernel recipe.
>>>> If we add a new recipe, then we can, by increasing the priority
>>>> force a different kernel to be built.
>>>> This will not affect anything else.
>>>>
>>>> If the version is in the machine configuration, then a change of
>>>> kernel version could force a total rebuild, or?
>>>>
>>> I dont think it will force any rebuild or anything. It will just not
>>> be the way other machines
>>> do things. The machine configuration tend to be version agnostic as
>>> per current approach.
>>>
>>>> Any other problem?
>>>>
>>> what are the issues that you see in following approaches suggested in
>>> this thread so far ?
>> 1) Many boards do put kernel version in the machine conf file.
>> The patch was created to collect common stuff in an include file
>> to make maintenance easier.
>>
>> 2) I cannot assume that all Atmel chips should use the same kernel,
>> so a single include file will not make it.
>>
>> 3) I want to be able to work with two kernel versions for the same chip.
>> This is to have one stable kernel, and one development kernel.
>> The use of the develoment kernel, should not make the stable version
>> unbuildable.
>
> you want to ship with two kernel or you want to work with two kernel versions?
> if you just want to develop then you can have the stable kernel
> version as preferred version
> and override that in local.conf with yout dev kernel for development
> purposes. Once you are
> done with it and it is your next stable just add
> DEFAULT_PREFERENCE_<machine> = "1" in that recipe
> and it should become new default for this machine.
>
I would like to ship with two kernels.
one "stable" kernel, and another "development" kernel
which is accessible to others to allow shared responsibility
for testing purposes.
Preferably, it should be possible to build both,
without having to rebuild the complete root fs.
>
> for release you can create your own pinned config file and call it
> inside distro config you have
> and have two distros one for dev and one for stable
>> If I put the preferred version in the recipe, then I can only work
>> with one kernel.
>>
>> If I try to use the preferred version in the recipe, then I
>> have to have two machine files.
>> I.E:
>> at91sam9g45ek
>> at91sam9g45ek-devel
>>
>> and I have to support both machines in the recipe.
>>
>> Once I have come to a point, where the development kernel is
>> to become the stable version, then I have to edit the recipe
>> again to make this the official.
>> I have to remove all references to "sam9g45ek",
>> then I have to modify the "sam9g45ek-devel" settings to refer to
>> "sam9g45ek", remove the sam9g45ek.conf and rename the
>> sam9g45ek-devel.conf to sam9g45ek.conf.
>>
>> I then have to retest everything!
>>
>> As I see it, the kernel/u-boot/at91bootstrap hangs together,
>> and it is easier to maintain a single include file with versions
>> for this, than to maintain the three recipes.
>>
>> If I maintain in the recipes, I have to create a lot
>> of preferred_version_<machine>) in multiple kernel recipes,
>> and with my method, I include a single file in the machine
>> configuration.
>> If I want to change kernel version, I edit a few characters.
>>
>> 4. This points to another weakness.
>> You can only build a certain machine in one way.
>>
>> Today, when we specify a MACHINE, we use "$MACHINE.conf"
>>
>> It would be better, if you could have several machine configuration
>> files referring to the same MACHINE, and specifying the MACHINE
>> in the configuration file.
>>
>> local.conf would then contain
>>
>> MACHINE_CONFIG = at91sam9g45ek-2.6.30.conf
>>
>> "at91sam9g45ek-2.6.30.conf" would contain
>>
>> MACHINE = at91sam9g45ek
>>
>> This would allow several configuration files referring to the same
>> machine.
>> The machine configuration must support selecting separate
>> * linux ".config"
>> * uboot configuration
>> * boot monitor configuration.
>
> why not use existing MACHINE_FEATURES to steer the features you would
> like to change in .config files.
>
>
>> Possibly, then machine configuration should support downloading such
>> stuff from internet.
>>
>> (I don't expect the mainline OE to contain more than one "stable"
>> version)
>>
>>
BR
Ulf
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-25 15:38 ` Ulf Samuelsson
@ 2010-10-25 17:56 ` Khem Raj
2010-10-25 19:32 ` Ulf Samuelsson
0 siblings, 1 reply; 33+ messages in thread
From: Khem Raj @ 2010-10-25 17:56 UTC (permalink / raw)
To: openembedded-devel
On 10/25/10, Ulf Samuelsson <ulf.samuelsson@atmel.com> wrote:
> Khem Raj skrev:
>> On Wed, Oct 20, 2010 at 4:57 PM, Ulf Samuelsson
>> <ulf.samuelsson@atmel.com> wrote:
>>> Khem Raj skrev:
>>>> On Mon, Oct 18, 2010 at 4:10 PM, Ulf Samuelsson
>>>> <ulf.samuelsson@atmel.com> wrote:
>>>>> Khem Raj skrev:
>>>>>> On Mon, Oct 18, 2010 at 10:10 AM, Ulf Samuelsson
>>>>>> <ulf.samuelsson@atmel.com> wrote:
>>>>>>> Koen Kooi skrev:
>>>>>>>> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>>>>>>>> Marcin Juszkiewicz skrev:
>>>>>>>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02
>>>>>>>>>> ulf.samuelsson@atmel.com
>>>>>>>>>> napisaB(a):
>>>>>>>>>>
>>>>>>>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>>>>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>>>>>>>> Do you plan to duplicate that file with each kernel you will
>>>>>>>>>> produce?
>>>>>>>>>> Create include/at91-sam9.inc and put it there.
>>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>> This is to allow different kernel versions for different AT91
>>>>>>>>> chips.
>>>>>>>>> This allows both a "stable" version, and a development kernel
>>>>>>>>> to be easily handled.
>>>>>>>>> The file defines (amongst other things) the
>>>>>>>>> * kernel version,
>>>>>>>>> * u-boot version
>>>>>>>>> * at91bootstrap version
>>>>>>>>> so you need one file per version.he
>>>>>>>> NAK! Machines don't get to decide versions! Please revert that
>>>>>>>> commit
>>>>>>>> and come up with a better way, e.g. default_preference in the
>>>>>>>> recipes
>>>>>>>> or
>>>>>>>> distro include files.
>>>>>>> If I look at the machine files, almost all of them provide
>>>>>>> a preferred kernel / u-boot. Some also provide version.
>>>>>> we should avoid pinning versions there. Choosing a type is fine.
>>>>>>
>>>>> Why ?
>>>>> Is it because it affect rebuild time?
>>>>> It would be good to understand what problems people see with this.
>>>> Well we have distro which sets policies including which recipe
>>>> versions to be pinned
>>>> machine configuration decides on various machine features. There are
>>>> different ways to do it
>>>> but if we remain consistent in what we do, we can make it more
>>>> understandable for others
>>>>
>>>> If you feel strongly that your approach is good I think it should be
>>>> decided if this is suitable
>>>> for majority of OE distro and machines, If it has technical merits
>>>> over existing approaches
>>>> people will be interested in it.
>>>>
>>>>> We are pinning the version to a specific machine, in the kernel recipe.
>>>>> If we add a new recipe, then we can, by increasing the priority
>>>>> force a different kernel to be built.
>>>>> This will not affect anything else.
>>>>>
>>>>> If the version is in the machine configuration, then a change of
>>>>> kernel version could force a total rebuild, or?
>>>>>
>>>> I dont think it will force any rebuild or anything. It will just not
>>>> be the way other machines
>>>> do things. The machine configuration tend to be version agnostic as
>>>> per current approach.
>>>>
>>>>> Any other problem?
>>>>>
>>>> what are the issues that you see in following approaches suggested in
>>>> this thread so far ?
>>> 1) Many boards do put kernel version in the machine conf file.
>>> The patch was created to collect common stuff in an include file
>>> to make maintenance easier.
>>>
>>> 2) I cannot assume that all Atmel chips should use the same kernel,
>>> so a single include file will not make it.
>>>
>>> 3) I want to be able to work with two kernel versions for the same chip.
>>> This is to have one stable kernel, and one development kernel.
>>> The use of the develoment kernel, should not make the stable version
>>> unbuildable.
>>
>> you want to ship with two kernel or you want to work with two kernel
>> versions?
>> if you just want to develop then you can have the stable kernel
>> version as preferred version
>> and override that in local.conf with yout dev kernel for development
>> purposes. Once you are
>> done with it and it is your next stable just add
>> DEFAULT_PREFERENCE_<machine> = "1" in that recipe
>> and it should become new default for this machine.
>>
>
> I would like to ship with two kernels.
> one "stable" kernel, and another "development" kernel
> which is accessible to others to allow shared responsibility
> for testing purposes.
>
you can either use different version of different recipe name
with different name you can just override the virtual/kernel
PREFERRED_PROVIDER_virtual/kernel = "/whatever/"
> Preferably, it should be possible to build both,
> without having to rebuild the complete root fs.
>
yes why not. One just needs to flip the PREFERRED_VERSION
in local.conf file and he should not get the kernel version he chose.
and no rebuild of rfs is needed.
>
>
>>
>> for release you can create your own pinned config file and call it
>> inside distro config you have
>> and have two distros one for dev and one for stable
>>> If I put the preferred version in the recipe, then I can only work
>>> with one kernel.
>>>
>>> If I try to use the preferred version in the recipe, then I
>>> have to have two machine files.
>>> I.E:
>>> at91sam9g45ek
>>> at91sam9g45ek-devel
>>>
>>> and I have to support both machines in the recipe.
>>>
>>> Once I have come to a point, where the development kernel is
>>> to become the stable version, then I have to edit the recipe
>>> again to make this the official.
>>> I have to remove all references to "sam9g45ek",
>>> then I have to modify the "sam9g45ek-devel" settings to refer to
>>> "sam9g45ek", remove the sam9g45ek.conf and rename the
>>> sam9g45ek-devel.conf to sam9g45ek.conf.
>>>
>>> I then have to retest everything!
>>>
>>> As I see it, the kernel/u-boot/at91bootstrap hangs together,
>>> and it is easier to maintain a single include file with versions
>>> for this, than to maintain the three recipes.
>>>
>>> If I maintain in the recipes, I have to create a lot
>>> of preferred_version_<machine>) in multiple kernel recipes,
>>> and with my method, I include a single file in the machine
>>> configuration.
>>> If I want to change kernel version, I edit a few characters.
>>>
>>> 4. This points to another weakness.
>>> You can only build a certain machine in one way.
>>>
>>> Today, when we specify a MACHINE, we use "$MACHINE.conf"
>>>
>>> It would be better, if you could have several machine configuration
>>> files referring to the same MACHINE, and specifying the MACHINE
>>> in the configuration file.
>>>
>>> local.conf would then contain
>>>
>>> MACHINE_CONFIG = at91sam9g45ek-2.6.30.conf
>>>
>>> "at91sam9g45ek-2.6.30.conf" would contain
>>>
>>> MACHINE = at91sam9g45ek
>>>
>>> This would allow several configuration files referring to the same
>>> machine.
>>> The machine configuration must support selecting separate
>>> * linux ".config"
>>> * uboot configuration
>>> * boot monitor configuration.
>>
>> why not use existing MACHINE_FEATURES to steer the features you would
>> like to change in .config files.
>>
>>
>>> Possibly, then machine configuration should support downloading such
>>> stuff from internet.
>>>
>>> (I don't expect the mainline OE to contain more than one "stable"
>>> version)
>>>
>>>
>
> BR
> Ulf
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
--
-Khem
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-25 17:56 ` Khem Raj
@ 2010-10-25 19:32 ` Ulf Samuelsson
2010-10-25 19:39 ` Frans Meulenbroeks
0 siblings, 1 reply; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-25 19:32 UTC (permalink / raw)
To: openembedded-devel
Khem Raj skrev:
> On 10/25/10, Ulf Samuelsson <ulf.samuelsson@atmel.com> wrote:
>> Khem Raj skrev:
>>> On Wed, Oct 20, 2010 at 4:57 PM, Ulf Samuelsson
>>> <ulf.samuelsson@atmel.com> wrote:
>>>> Khem Raj skrev:
>>>>> On Mon, Oct 18, 2010 at 4:10 PM, Ulf Samuelsson
>>>>> <ulf.samuelsson@atmel.com> wrote:
>>>>>> Khem Raj skrev:
>>>>>>> On Mon, Oct 18, 2010 at 10:10 AM, Ulf Samuelsson
>>>>>>> <ulf.samuelsson@atmel.com> wrote:
>>>>>>>> Koen Kooi skrev:
>>>>>>>>> On 18-10-10 15:38, Ulf Samuelsson wrote:
>>>>>>>>>> Marcin Juszkiewicz skrev:
>>>>>>>>>>> Dnia sobota, 16 pazdziernika 2010 o 14:50:02
>>>>>>>>>>> ulf.samuelsson@atmel.com
>>>>>>>>>>> napisaB(a):
>>>>>>>>>>>
>>>>>>>>>>>> +++ b/conf/machine/include/at91-2.6.30.inc
>>>>>>>>>>>> +++ b/conf/machine/include/at91-2.6.32.inc
>>>>>>>>>>> Do you plan to duplicate that file with each kernel you will
>>>>>>>>>>> produce?
>>>>>>>>>>> Create include/at91-sam9.inc and put it there.
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>> This is to allow different kernel versions for different AT91
>>>>>>>>>> chips.
>>>>>>>>>> This allows both a "stable" version, and a development kernel
>>>>>>>>>> to be easily handled.
>>>>>>>>>> The file defines (amongst other things) the
>>>>>>>>>> * kernel version,
>>>>>>>>>> * u-boot version
>>>>>>>>>> * at91bootstrap version
>>>>>>>>>> so you need one file per version.he
>>>>>>>>> NAK! Machines don't get to decide versions! Please revert that
>>>>>>>>> commit
>>>>>>>>> and come up with a better way, e.g. default_preference in the
>>>>>>>>> recipes
>>>>>>>>> or
>>>>>>>>> distro include files.
>>>>>>>> If I look at the machine files, almost all of them provide
>>>>>>>> a preferred kernel / u-boot. Some also provide version.
>>>>>>> we should avoid pinning versions there. Choosing a type is fine.
>>>>>>>
>>>>>> Why ?
>>>>>> Is it because it affect rebuild time?
>>>>>> It would be good to understand what problems people see with this.
>>>>> Well we have distro which sets policies including which recipe
>>>>> versions to be pinned
>>>>> machine configuration decides on various machine features. There are
>>>>> different ways to do it
>>>>> but if we remain consistent in what we do, we can make it more
>>>>> understandable for others
>>>>>
>>>>> If you feel strongly that your approach is good I think it should be
>>>>> decided if this is suitable
>>>>> for majority of OE distro and machines, If it has technical merits
>>>>> over existing approaches
>>>>> people will be interested in it.
>>>>>
>>>>>> We are pinning the version to a specific machine, in the kernel recipe.
>>>>>> If we add a new recipe, then we can, by increasing the priority
>>>>>> force a different kernel to be built.
>>>>>> This will not affect anything else.
>>>>>>
>>>>>> If the version is in the machine configuration, then a change of
>>>>>> kernel version could force a total rebuild, or?
>>>>>>
>>>>> I dont think it will force any rebuild or anything. It will just not
>>>>> be the way other machines
>>>>> do things. The machine configuration tend to be version agnostic as
>>>>> per current approach.
>>>>>
>>>>>> Any other problem?
>>>>>>
>>>>> what are the issues that you see in following approaches suggested in
>>>>> this thread so far ?
>>>> 1) Many boards do put kernel version in the machine conf file.
>>>> The patch was created to collect common stuff in an include file
>>>> to make maintenance easier.
>>>>
>>>> 2) I cannot assume that all Atmel chips should use the same kernel,
>>>> so a single include file will not make it.
>>>>
>>>> 3) I want to be able to work with two kernel versions for the same chip.
>>>> This is to have one stable kernel, and one development kernel.
>>>> The use of the develoment kernel, should not make the stable version
>>>> unbuildable.
>>> you want to ship with two kernel or you want to work with two kernel
>>> versions?
>>> if you just want to develop then you can have the stable kernel
>>> version as preferred version
>>> and override that in local.conf with yout dev kernel for development
>>> purposes. Once you are
>>> done with it and it is your next stable just add
>>> DEFAULT_PREFERENCE_<machine> = "1" in that recipe
>>> and it should become new default for this machine.
>>>
>> I would like to ship with two kernels.
>> one "stable" kernel, and another "development" kernel
>> which is accessible to others to allow shared responsibility
>> for testing purposes.
>>
>
> you can either use different version of different recipe name
> with different name you can just override the virtual/kernel
> PREFERRED_PROVIDER_virtual/kernel = "/whatever/"
>
>> Preferably, it should be possible to build both,
>> without having to rebuild the complete root fs.
>>
>
> yes why not. One just needs to flip the PREFERRED_VERSION
> in local.conf file and he should not get the kernel version he chose.
> and no rebuild of rfs is needed.
Except it is not obvious.
How does anyone know which kernel version is the stable
and which is the experimental.
Indeed, how does anyone know that there is an experimental kernel
version at all.
>
>>
>>> for release you can create your own pinned config file and call it
>>> inside distro config you have
>>> and have two distros one for dev and one for stable
>>>> If I put the preferred version in the recipe, then I can only work
>>>> with one kernel.
>>>>
>>>> If I try to use the preferred version in the recipe, then I
>>>> have to have two machine files.
>>>> I.E:
>>>> at91sam9g45ek
>>>> at91sam9g45ek-devel
>>>>
>>>> and I have to support both machines in the recipe.
>>>>
>>>> Once I have come to a point, where the development kernel is
>>>> to become the stable version, then I have to edit the recipe
>>>> again to make this the official.
>>>> I have to remove all references to "sam9g45ek",
>>>> then I have to modify the "sam9g45ek-devel" settings to refer to
>>>> "sam9g45ek", remove the sam9g45ek.conf and rename the
>>>> sam9g45ek-devel.conf to sam9g45ek.conf.
>>>>
>>>> I then have to retest everything!
>>>>
>>>> As I see it, the kernel/u-boot/at91bootstrap hangs together,
>>>> and it is easier to maintain a single include file with versions
>>>> for this, than to maintain the three recipes.
>>>>
>>>> If I maintain in the recipes, I have to create a lot
>>>> of preferred_version_<machine>) in multiple kernel recipes,
>>>> and with my method, I include a single file in the machine
>>>> configuration.
>>>> If I want to change kernel version, I edit a few characters.
>>>>
>>>> 4. This points to another weakness.
>>>> You can only build a certain machine in one way.
>>>>
>>>> Today, when we specify a MACHINE, we use "$MACHINE.conf"
>>>>
>>>> It would be better, if you could have several machine configuration
>>>> files referring to the same MACHINE, and specifying the MACHINE
>>>> in the configuration file.
>>>>
>>>> local.conf would then contain
>>>>
>>>> MACHINE_CONFIG = at91sam9g45ek-2.6.30.conf
>>>>
>>>> "at91sam9g45ek-2.6.30.conf" would contain
>>>>
>>>> MACHINE = at91sam9g45ek
>>>>
>>>> This would allow several configuration files referring to the same
>>>> machine.
>>>> The machine configuration must support selecting separate
>>>> * linux ".config"
>>>> * uboot configuration
>>>> * boot monitor configuration.
>>> why not use existing MACHINE_FEATURES to steer the features you would
>>> like to change in .config files.
>>>
>>>
>>>> Possibly, then machine configuration should support downloading such
>>>> stuff from internet.
>>>>
>>>> (I don't expect the mainline OE to contain more than one "stable"
>>>> version)
>>>>
>>>>
>> BR
>> Ulf
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
>
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-25 19:32 ` Ulf Samuelsson
@ 2010-10-25 19:39 ` Frans Meulenbroeks
2010-10-28 19:04 ` Ulf Samuelsson
0 siblings, 1 reply; 33+ messages in thread
From: Frans Meulenbroeks @ 2010-10-25 19:39 UTC (permalink / raw)
To: openembedded-devel
2010/10/25 Ulf Samuelsson <ulf.samuelsson@atmel.com>:
>
> Except it is not obvious.
> How does anyone know which kernel version is the stable
> and which is the experimental.
> Indeed, how does anyone know that there is an experimental kernel version at
> all.
>
Make two recipes (e.g. in an overlay)
linux-stable and linux-experimental
they can have their own defconfigs etc
and you can just include the base bb file.
if you want to you can even get both kernels in a single rfs so you
can boot from either.
Have fun! Frans
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 1/5] Use common files for AT91SAM9 configuration
2010-10-25 19:39 ` Frans Meulenbroeks
@ 2010-10-28 19:04 ` Ulf Samuelsson
0 siblings, 0 replies; 33+ messages in thread
From: Ulf Samuelsson @ 2010-10-28 19:04 UTC (permalink / raw)
To: openembedded-devel
Frans Meulenbroeks skrev:
> 2010/10/25 Ulf Samuelsson <ulf.samuelsson@atmel.com>:
>
>> Except it is not obvious.
>> How does anyone know which kernel version is the stable
>> and which is the experimental.
>> Indeed, how does anyone know that there is an experimental kernel version at
>> all.
>>
> Make two recipes (e.g. in an overlay)
> linux-stable and linux-experimental
> they can have their own defconfigs etc
> and you can just include the base bb file.
> if you want to you can even get both kernels in a single rfs so you
> can boot from either.
Well the plan *is* to use two recipes,
"linux-2.6.30.bb" and "linux-2.6.32.bb" as an example.
I am not sure what you mean by overlay.
Also not sure what you mean by includeing the base bb file.
Which file would be the base?
Which file would include the base?
>
> Have fun! Frans
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
^ permalink raw reply [flat|nested] 33+ messages in thread
end of thread, other threads:[~2010-10-28 19:05 UTC | newest]
Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-10-16 12:50 [PATCH 1/5] Use common files for AT91SAM9 configuration ulf.samuelsson
2010-10-16 12:50 ` [PATCH 2/5] Add AT91SAM9 linux-2.6.30 from www.linux4sam.org ulf.samuelsson
2010-10-16 12:50 ` [PATCH 3/5] Add u-boot-2009.11 support for AT91SAM9 ulf.samuelsson
2010-10-16 12:50 ` [PATCH 4/5] Add X-Windows support for AT91 LCD controller ulf.samuelsson
2010-10-16 12:50 ` [PATCH 5/5] Add X11 images with more multimedia support (mplayer etc.) ulf.samuelsson
2010-10-18 13:18 ` Marcin Juszkiewicz
2010-10-18 13:46 ` Ulf Samuelsson
2010-10-18 13:20 ` [PATCH 1/5] Use common files for AT91SAM9 configuration Marcin Juszkiewicz
2010-10-18 13:38 ` Ulf Samuelsson
2010-10-18 15:36 ` Koen Kooi
2010-10-18 17:00 ` Frans Meulenbroeks
2010-10-18 17:16 ` Ulf Samuelsson
2010-10-18 17:10 ` Ulf Samuelsson
2010-10-18 19:05 ` Khem Raj
2010-10-18 23:10 ` Ulf Samuelsson
2010-10-18 23:33 ` Khem Raj
2010-10-20 23:57 ` Ulf Samuelsson
2010-10-21 6:00 ` Khem Raj
2010-10-25 15:38 ` Ulf Samuelsson
2010-10-25 17:56 ` Khem Raj
2010-10-25 19:32 ` Ulf Samuelsson
2010-10-25 19:39 ` Frans Meulenbroeks
2010-10-28 19:04 ` Ulf Samuelsson
2010-10-21 8:11 ` Koen Kooi
2010-10-21 8:43 ` Frans Meulenbroeks
2010-10-21 9:25 ` Koen Kooi
2010-10-21 9:53 ` Frans Meulenbroeks
2010-10-21 22:01 ` Ulf Samuelsson
2010-10-22 6:28 ` Frans Meulenbroeks
2010-10-25 15:35 ` Ulf Samuelsson
2010-10-19 2:30 ` Philip Balister
2010-10-19 7:24 ` Frans Meulenbroeks
2010-10-20 23:44 ` Ulf Samuelsson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.