* Nouveau won't load with GeForce 6150SE nForce 430 (NV40)
@ 2011-02-06 0:30 Grant
[not found] ` <AANLkTim9QZxKmNwux38ggsp1Y22vzHCja1gV-F2QhsOZ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Grant @ 2011-02-06 0:30 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
I can't seem to get nouveau to load with my onboard GeForce 6150SE
nForce 430 which I believe is an NV40 chip. I enabled DRM and
DRM_NOUVEAU in the kernel but lspci -v doesn't show any kernel driver
in use and Xorg fails to load the module. It does work with the
nvidia driver. I'm using Gentoo.
Should nouveau work with my card? If so, any idea what I did wrong?
- Grant
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Nouveau won't load with GeForce 6150SE nForce 430 (NV40)
[not found] ` <AANLkTim9QZxKmNwux38ggsp1Y22vzHCja1gV-F2QhsOZ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2011-02-06 7:31 ` Xavier Chantry
[not found] ` <AANLkTik+NDg8JZoY+oM1mhCyevev3GmLKdnxtwE39yeR-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Xavier Chantry @ 2011-02-06 7:31 UTC (permalink / raw)
To: Grant; +Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
On Sun, Feb 6, 2011 at 1:30 AM, Grant <emailgrant-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> I can't seem to get nouveau to load with my onboard GeForce 6150SE
> nForce 430 which I believe is an NV40 chip. I enabled DRM and
> DRM_NOUVEAU in the kernel but lspci -v doesn't show any kernel driver
> in use and Xorg fails to load the module. It does work with the
> nvidia driver. I'm using Gentoo.
>
> Should nouveau work with my card? If so, any idea what I did wrong?
>
Please attach a full dmesg.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Nouveau won't load with GeForce 6150SE nForce 430 (NV40)
[not found] ` <AANLkTik+NDg8JZoY+oM1mhCyevev3GmLKdnxtwE39yeR-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2011-02-19 19:25 ` Grant
[not found] ` <AANLkTikBEFZWJ372gha1mmnMeXk2+nOP+CKvC_891bYX-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Grant @ 2011-02-19 19:25 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1: Type: text/plain, Size: 791 bytes --]
>> I can't seem to get nouveau to load with my onboard GeForce 6150SE
>> nForce 430 which I believe is an NV40 chip. I enabled DRM and
>> DRM_NOUVEAU in the kernel but lspci -v doesn't show any kernel driver
>> in use and Xorg fails to load the module. It does work with the
>> nvidia driver. I'm using Gentoo.
>>
>> Should nouveau work with my card? If so, any idea what I did wrong?
>>
>
> Please attach a full dmesg.
I switched everything over to nvidia, then back to nouveau, and lspci
-v does show the nouveau kernel module in use but X doesn't start
properly. The workstation is remote to me and the report I received
upon starting X was that the screen image was "scrambled" and
completely unrecognizable. I've attached a full dmesg and Xorg.0.log.
- Grant
[-- Attachment #2: Xorg.0.log --]
[-- Type: text/plain, Size: 25140 bytes --]
[ 30.408]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[ 30.408] X Protocol Version 11, Revision 0
[ 30.408] Build Operating System: Linux 2.6.36-hardened-r9 x86_64 Gentoo
[ 30.408] Current Operating System: Linux system3 2.6.36-hardened-r9 #8 SMP Wed Feb 16 10:12:06 PST 2011 x86_64
[ 30.408] Kernel command line: root=/dev/sda3
[ 30.408] Build Date: 12 February 2011 11:50:58AM
[ 30.408]
[ 30.408] Current version of pixman: 0.20.2
[ 30.408] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.408] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.408] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 18 08:03:32 2011
[ 30.458] (==) Using config file: "/etc/X11/xorg.conf"
[ 30.459] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.491] (==) No Layout section. Using the first Screen section.
[ 30.491] (**) |-->Screen "myscreen" (0)
[ 30.491] (**) | |-->Monitor "<default monitor>"
[ 30.491] (**) | |-->Device "mydevice"
[ 30.491] (==) No monitor specified for screen "myscreen".
Using a default monitor configuration.
[ 30.491] (==) Automatically adding devices
[ 30.491] (==) Automatically enabling devices
[ 30.514] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 30.514] Entry deleted from font path.
[ 30.514] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 30.514] Entry deleted from font path.
[ 30.542] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 30.542] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 30.542] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.542] (II) Loader magic: 0x7c6080
[ 30.542] (II) Module ABI versions:
[ 30.542] X.Org ANSI C Emulation: 0.4
[ 30.542] X.Org Video Driver: 8.0
[ 30.542] X.Org XInput driver : 11.0
[ 30.542] X.Org Server Extension : 4.0
[ 30.543] (--) PCI:*(0:0:13:0) 10de:03d0:1462:7309 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xdd000000/16777216, BIOS @ 0x????????/131072
[ 30.543] (WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
[ 30.543] (II) LoadModule: "extmod"
[ 30.558] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 30.574] (II) Module extmod: vendor="X.Org Foundation"
[ 30.574] compiled for 1.9.4, module version = 1.0.0
[ 30.574] Module class: X.Org Server Extension
[ 30.574] ABI class: X.Org Server Extension, version 4.0
[ 30.574] (II) Loading extension MIT-SCREEN-SAVER
[ 30.574] (II) Loading extension XFree86-VidModeExtension
[ 30.574] (II) Loading extension XFree86-DGA
[ 30.574] (II) Loading extension DPMS
[ 30.574] (II) Loading extension XVideo
[ 30.574] (II) Loading extension XVideo-MotionCompensation
[ 30.574] (II) Loading extension X-Resource
[ 30.574] (II) LoadModule: "dbe"
[ 30.583] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 30.594] (II) Module dbe: vendor="X.Org Foundation"
[ 30.594] compiled for 1.9.4, module version = 1.0.0
[ 30.594] Module class: X.Org Server Extension
[ 30.594] ABI class: X.Org Server Extension, version 4.0
[ 30.594] (II) Loading extension DOUBLE-BUFFER
[ 30.594] (II) LoadModule: "glx"
[ 30.625] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 30.642] (II) Module glx: vendor="X.Org Foundation"
[ 30.642] compiled for 1.9.4, module version = 1.0.0
[ 30.642] ABI class: X.Org Server Extension, version 4.0
[ 30.642] (==) AIGLX enabled
[ 30.642] (II) Loading extension GLX
[ 30.643] (II) LoadModule: "record"
[ 30.643] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 30.649] (II) Module record: vendor="X.Org Foundation"
[ 30.649] compiled for 1.9.4, module version = 1.13.0
[ 30.649] Module class: X.Org Server Extension
[ 30.649] ABI class: X.Org Server Extension, version 4.0
[ 30.649] (II) Loading extension RECORD
[ 30.649] (II) LoadModule: "dri"
[ 30.649] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 30.657] (II) Module dri: vendor="X.Org Foundation"
[ 30.657] compiled for 1.9.4, module version = 1.0.0
[ 30.657] ABI class: X.Org Server Extension, version 4.0
[ 30.657] (II) Loading extension XFree86-DRI
[ 30.657] (II) LoadModule: "dri2"
[ 30.657] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 30.662] (II) Module dri2: vendor="X.Org Foundation"
[ 30.662] compiled for 1.9.4, module version = 1.2.0
[ 30.662] ABI class: X.Org Server Extension, version 4.0
[ 30.662] (II) Loading extension DRI2
[ 30.662] (II) LoadModule: "nouveau"
[ 30.687] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 30.708] (II) Module nouveau: vendor="X.Org Foundation"
[ 30.708] compiled for 1.9.4, module version = 0.0.16
[ 30.708] Module class: X.Org Video Driver
[ 30.708] ABI class: X.Org Video Driver, version 8.0
[ 30.708] (II) NOUVEAU driver
[ 30.708] (II) NOUVEAU driver for NVIDIA chipset families :
[ 30.708] RIVA TNT (NV04)
[ 30.708] RIVA TNT2 (NV05)
[ 30.708] GeForce 256 (NV10)
[ 30.708] GeForce 2 (NV11, NV15)
[ 30.708] GeForce 4MX (NV17, NV18)
[ 30.708] GeForce 3 (NV20)
[ 30.708] GeForce 4Ti (NV25, NV28)
[ 30.708] GeForce FX (NV3x)
[ 30.708] GeForce 6 (NV4x)
[ 30.708] GeForce 7 (G7x)
[ 30.708] GeForce 8 (G8x)
[ 30.708] (++) using VT number 7
[ 30.710] drmOpenDevice: node name is /dev/dri/card0
[ 30.710] drmOpenDevice: open result is 7, (OK)
[ 30.710] drmOpenByBusid: Searching for BusID pci:0000:00:0d.0
[ 30.710] drmOpenDevice: node name is /dev/dri/card0
[ 30.710] drmOpenDevice: open result is 7, (OK)
[ 30.710] drmOpenByBusid: drmOpenMinor returns 7
[ 30.710] drmOpenByBusid: drmGetBusid reports pci:0000:00:0d.0
[ 30.710] (II) [drm] nouveau interface version: 0.0.16
[ 30.710] (II) Loading sub module "dri"
[ 30.710] (II) LoadModule: "dri"
[ 30.711] (II) Reloading /usr/lib64/xorg/modules/extensions/libdri.so
[ 30.711] (II) NOUVEAU(0): Loaded DRI module
[ 30.711] drmOpenDevice: node name is /dev/dri/card0
[ 30.711] drmOpenDevice: open result is 8, (OK)
[ 30.711] drmOpenDevice: node name is /dev/dri/card0
[ 30.711] drmOpenDevice: open result is 8, (OK)
[ 30.711] drmOpenByBusid: Searching for BusID pci:0000:00:0d.0
[ 30.711] drmOpenDevice: node name is /dev/dri/card0
[ 30.711] drmOpenDevice: open result is 8, (OK)
[ 30.711] drmOpenByBusid: drmOpenMinor returns 8
[ 30.711] drmOpenByBusid: drmGetBusid reports pci:0000:00:0d.0
[ 30.711] (II) [drm] DRM interface version 1.4
[ 30.711] (II) [drm] DRM open master succeeded.
[ 30.711] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[ 30.711] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 30.711] (==) NOUVEAU(0): RGB weight 888
[ 30.711] (==) NOUVEAU(0): Default visual is TrueColor
[ 30.711] (==) NOUVEAU(0): Using HW cursor
[ 30.711] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 30.824] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 30.928] (II) NOUVEAU(0): EDID for output VGA-1
[ 30.928] (II) NOUVEAU(0): Manufacturer: HWP Model: 260e Serial#: 1362184010
[ 30.928] (II) NOUVEAU(0): Year: 2004 Week: 12
[ 30.928] (II) NOUVEAU(0): EDID Version: 1.3
[ 30.928] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 30.928] (II) NOUVEAU(0): Sync: Separate
[ 30.928] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 30.928] (II) NOUVEAU(0): Gamma: 2.20
[ 30.928] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 30.928] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 30.928] (II) NOUVEAU(0): redX: 0.640 redY: 0.342 greenX: 0.309 greenY: 0.583
[ 30.928] (II) NOUVEAU(0): blueX: 0.142 blueY: 0.097 whiteX: 0.313 whiteY: 0.329
[ 30.928] (II) NOUVEAU(0): Supported established timings:
[ 30.928] (II) NOUVEAU(0): 720x400@70Hz
[ 30.928] (II) NOUVEAU(0): 640x480@60Hz
[ 30.928] (II) NOUVEAU(0): 640x480@72Hz
[ 30.928] (II) NOUVEAU(0): 640x480@75Hz
[ 30.928] (II) NOUVEAU(0): 800x600@60Hz
[ 30.928] (II) NOUVEAU(0): 800x600@72Hz
[ 30.928] (II) NOUVEAU(0): 800x600@75Hz
[ 30.928] (II) NOUVEAU(0): 832x624@75Hz
[ 30.928] (II) NOUVEAU(0): 1024x768@60Hz
[ 30.928] (II) NOUVEAU(0): 1024x768@70Hz
[ 30.928] (II) NOUVEAU(0): 1024x768@75Hz
[ 30.928] (II) NOUVEAU(0): 1280x1024@75Hz
[ 30.928] (II) NOUVEAU(0): 1152x864@75Hz
[ 30.928] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 30.928] (II) NOUVEAU(0): Supported standard timings:
[ 30.928] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 30.928] (II) NOUVEAU(0): Supported detailed timing:
[ 30.928] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 30.928] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 30.928] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 30.928] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 30.928] (II) NOUVEAU(0): Monitor name: hp L1730
[ 30.928] (II) NOUVEAU(0): Serial No: CNP412Q1GJ
[ 30.928] (II) NOUVEAU(0): EDID (in hex):
[ 30.928] (II) NOUVEAU(0): 00ffffffffffff0022f00e264a473151
[ 30.928] (II) NOUVEAU(0): 0c0e010368221b78eae175a3574f9524
[ 30.928] (II) NOUVEAU(0): 185054adef8081800101010101010101
[ 30.928] (II) NOUVEAU(0): 010101010101302a009851002a403070
[ 30.928] (II) NOUVEAU(0): 1300520e1100001e000000fd00384c1e
[ 30.928] (II) NOUVEAU(0): 530e000a202020202020000000fc0068
[ 30.928] (II) NOUVEAU(0): 70204c313733300a20202020000000ff
[ 30.928] (II) NOUVEAU(0): 00434e503431325131474a0a20200027
[ 30.928] (II) NOUVEAU(0): EDID vendor "HWP", prod id 9742
[ 30.929] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 30.929] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 30.929] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 30.929] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 30.929] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 30.929] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 30.929] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 30.929] (II) NOUVEAU(0): Output VGA-1 connected
[ 30.929] (II) NOUVEAU(0): Using user preference for initial modes
[ 30.929] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[ 30.929] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 30.929] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 30.929] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 30.929] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 30.929] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 30.930] (**) NOUVEAU(0): Display dimensions: (340, 270) mm
[ 30.930] (**) NOUVEAU(0): DPI set to (76, 72)
[ 30.930] (II) Loading sub module "fb"
[ 30.930] (II) LoadModule: "fb"
[ 30.930] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 30.945] (II) Module fb: vendor="X.Org Foundation"
[ 30.945] compiled for 1.9.4, module version = 1.0.0
[ 30.945] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.945] (II) Loading sub module "exa"
[ 30.945] (II) LoadModule: "exa"
[ 30.945] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 30.950] (II) Module exa: vendor="X.Org Foundation"
[ 30.950] compiled for 1.9.4, module version = 2.5.0
[ 30.950] ABI class: X.Org Video Driver, version 8.0
[ 30.950] (II) Loading sub module "shadowfb"
[ 30.950] (II) LoadModule: "shadowfb"
[ 30.950] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 30.957] (II) Module shadowfb: vendor="X.Org Foundation"
[ 30.957] compiled for 1.9.4, module version = 1.0.0
[ 30.957] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.957] (--) Depth 24 pixmap format is 32 bpp
[ 30.957] (II) NOUVEAU(0): Opened GPU channel 1
[ 30.957] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.957] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.957] (II) NOUVEAU(0): GART: 64MiB available
[ 30.958] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 30.976] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.976] (II) EXA(0): Driver registered support for the following operations:
[ 30.976] (II) Solid
[ 30.976] (II) Copy
[ 30.976] (II) Composite (RENDER acceleration)
[ 30.976] (II) UploadToScreen
[ 30.976] (II) DownloadFromScreen
[ 30.976] (==) NOUVEAU(0): Backing store disabled
[ 30.976] (==) NOUVEAU(0): Silken mouse enabled
[ 30.977] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 30.977] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 30.977] (==) NOUVEAU(0): DPMS enabled
[ 30.977] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 30.977] (WW) NOUVEAU(0): Option "Rotate" is not used
[ 30.977] (--) RandR disabled
[ 30.977] (II) Initializing built-in extension Generic Event Extension
[ 30.977] (II) Initializing built-in extension SHAPE
[ 30.977] (II) Initializing built-in extension MIT-SHM
[ 30.977] (II) Initializing built-in extension XInputExtension
[ 30.977] (II) Initializing built-in extension XTEST
[ 30.977] (II) Initializing built-in extension BIG-REQUESTS
[ 30.977] (II) Initializing built-in extension SYNC
[ 30.977] (II) Initializing built-in extension XKEYBOARD
[ 30.977] (II) Initializing built-in extension XC-MISC
[ 30.977] (II) Initializing built-in extension XINERAMA
[ 30.977] (II) Initializing built-in extension XFIXES
[ 30.977] (II) Initializing built-in extension RENDER
[ 30.977] (II) Initializing built-in extension RANDR
[ 30.977] (II) Initializing built-in extension COMPOSITE
[ 30.977] (II) Initializing built-in extension DAMAGE
[ 31.157] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 31.157] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 31.157] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 31.157] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 31.157] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 31.158] (II) AIGLX: Loaded and initialized /usr/lib64/dri/nouveau_dri.so
[ 31.158] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 31.160] (II) NOUVEAU(0): NVEnterVT is called.
[ 31.180] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 31.180] resize called 1024 768
[ 31.549] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 31.549] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.549] (II) LoadModule: "evdev"
[ 31.561] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 31.577] (II) Module evdev: vendor="X.Org Foundation"
[ 31.577] compiled for 1.9.4, module version = 2.6.0
[ 31.577] Module class: X.Org XInput Driver
[ 31.577] ABI class: X.Org XInput driver, version 11.0
[ 31.577] (**) Power Button: always reports core events
[ 31.577] (**) Power Button: Device: "/dev/input/event1"
[ 31.582] (--) Power Button: Found keys
[ 31.582] (II) Power Button: Configuring as keyboard
[ 31.582] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 31.582] (**) Option "xkb_rules" "evdev"
[ 31.582] (**) Option "xkb_model" "evdev"
[ 31.582] (**) Option "xkb_layout" "us"
[ 31.612] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 31.612] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.612] (**) Power Button: always reports core events
[ 31.612] (**) Power Button: Device: "/dev/input/event0"
[ 31.622] (--) Power Button: Found keys
[ 31.622] (II) Power Button: Configuring as keyboard
[ 31.622] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 31.622] (**) Option "xkb_rules" "evdev"
[ 31.622] (**) Option "xkb_model" "evdev"
[ 31.622] (**) Option "xkb_layout" "us"
[ 31.627] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 31.627] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 31.627] (**) AT Translated Set 2 keyboard: always reports core events
[ 31.627] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 31.634] (--) AT Translated Set 2 keyboard: Found keys
[ 31.634] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 31.634] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 31.634] (**) Option "xkb_rules" "evdev"
[ 31.634] (**) Option "xkb_model" "evdev"
[ 31.634] (**) Option "xkb_layout" "us"
[ 31.634] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event3)
[ 31.634] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 31.634] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 31.635] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event3"
[ 31.646] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 31.646] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 31.646] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 31.646] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 31.646] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 31.646] (II) ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 31.646] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 31.646] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.646] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
[ 31.646] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 31.646] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 31.646] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 31.646] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 31.646] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 31.646] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 31.646] (II) No input driver/identifier specified (ignoring)
[-- Attachment #3: dmesg --]
[-- Type: application/octet-stream, Size: 31055 bytes --]
eg 10: [io 0x4f00-0x4fff]
pci 0000:00:01.1: reg 10: [io 0x4900-0x493f]
pci 0000:00:01.1: reg 20: [io 0x4d00-0x4d3f]
pci 0000:00:01.1: reg 24: [io 0x4e00-0x4e3f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.3: reg 10: [mem 0xfec80000-0xfecfffff]
pci 0000:00:02.0: reg 10: [mem 0xdfe7f000-0xdfe7ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xdfe7ec00-0xdfe7ecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10: [mem 0xdfe78000-0xdfe7bfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20: [io 0xfff0-0xffff]
pci 0000:00:07.0: reg 10: [mem 0xdfe7d000-0xdfe7dfff]
pci 0000:00:07.0: reg 14: [io 0xee00-0xee07]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10: [io 0xed80-0xed87]
pci 0000:00:08.0: reg 14: [io 0xed00-0xed03]
pci 0000:00:08.0: reg 18: [io 0xec00-0xec07]
pci 0000:00:08.0: reg 1c: [io 0xeb80-0xeb83]
pci 0000:00:08.0: reg 20: [io 0xeb00-0xeb0f]
pci 0000:00:08.0: reg 24: [mem 0xdfe7c000-0xdfe7cfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: reg 10: [mem 0xde000000-0xdeffffff]
pci 0000:00:0d.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:0d.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit]
pci 0000:00:0d.0: reg 30: [mem 0xdfe40000-0xdfe5ffff pref]
pci 0000:01:09.0: reg 10: [mem 0xdfff0000-0xdfffffff]
pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:04.0: bridge window [mem 0xdff00000-0xdfffffff]
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:01.3: no compatible bridge window for [mem 0xfec80000-0xfecfffff]
reserve RAM buffer: 000000000009f000 - 000000000009ffff
reserve RAM buffer: 000000007bfc0000 - 000000007bffffff
cfg80211: Calling CRDA to update world regulatory domain
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x080f] has been reserved
system 00:07: [io 0x4000-0x407f] has been reserved
system 00:07: [io 0x4080-0x40ff] has been reserved
system 00:07: [io 0x4400-0x447f] has been reserved
system 00:07: [io 0x4480-0x44ff] has been reserved
system 00:07: [io 0x4800-0x487f] has been reserved
system 00:07: [io 0x4880-0x48ff] has been reserved
system 00:07: [io 0x4c00-0x4c7f] has been reserved
system 00:07: [io 0x4c80-0x4cff] has been reserved
system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
system 00:07: [mem 0xfec80000-0x1fd93ffff] could not be reserved
system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:07: [mem 0xffb80000-0xffffffff] could not be reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [io 0x0a00-0x0adf] has been reserved
system 00:0b: [io 0x0ae0-0x0aef] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
Switching to clocksource acpi_pm
pci 0000:00:01.3: BAR 0: assigned [mem 0x80000000-0x8007ffff]
pci 0000:00:01.3: BAR 0: set to [mem 0x80000000-0x8007ffff] (PCI address [0x80000000-0x8007ffff]
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem 0xdff00000-0xdfffffff]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem disabled]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem disabled]
pci 0000:00:0b.0: bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: bridge window [io disabled]
pci 0000:00:0c.0: bridge window [mem disabled]
pci 0000:00:0c.0: bridge window [mem pref disabled]
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xdff00000-0xdfffffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0x80000000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Boot video device
PCI: CLS 64 bytes, default 64
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 3888
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:09.0: ACPI _OSC control granted for 0x15
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0b.0: ACPI _OSC control granted for 0x15
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0c.0: ACPI _OSC control granted for 0x15
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Linux agpgart interface v0.103
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 23
nouveau 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 23 (level, low) -> IRQ 23
nouveau 0000:00:0d.0: setting latency timer to 64
[drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2)
[drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:00:0d.0: ... appears to be valid
[drm] nouveau 0000:00:0d.0: BIT BIOS found
[drm] nouveau 0000:00:0d.0: Bios version 05.61.32.25
[drm] nouveau 0000:00:0d.0: TMDS table version 1.1
[drm] nouveau 0000:00:0d.0: BIT table 'd' not found
[drm] nouveau 0000:00:0d.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023
[drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 98830003
[drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:00:0d.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:00:0d.0: 1: 0x00001131: type 0x31 idx 1 tag 0x07
[drm] nouveau 0000:00:0d.0: 2: 0x00000110: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:00:0d.0: 3: 0x00000111: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:00:0d.0: 4: 0x00000113: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xDEB3
[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xE00A
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xE00B
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xE18D
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xE1D6
[drm] nouveau 0000:00:0d.0: Detected 64MiB VRAM
[TTM] Zone kernel: Available graphics memory: 995468 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
[drm] nouveau 0000:00:0d.0: Saving VGA fonts
[drm] nouveau 0000:00:0d.0: unknown connector type: 0xff!!
[drm] nouveau 0000:00:0d.0: Allocating FIFO number 0
[drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: allocated 1280x1024 fb: 0x48000, bo ffff88007ba38c00
[drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A
Console: switching to colour frame buffer device 160x64
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:00:0d.0 on minor 0
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
loop: module loaded
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:06.0: UDMA133 controller
amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2)
amd74xx 0000:00:06.0: IDE port disabled
amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfff0-0xfff7
Probing IDE interface ide0...
hda: HL-DT-STDVD-RAM GH22LP20, ATAPI CD/DVD-ROM drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:08.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xed80 ctl 0xed00 bmdma 0xeb00 irq 22
ata2: SATA max UDMA/133 cmd 0xec00 ctl 0xeb80 bmdma 0xeb08 irq 22
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
forcedeth 0000:00:07.0: setting latency timer to 64
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:92:f1:1c:64
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: reset hcs_params 0x101a8a dbg=1 cc=1 pcc=10 !ppc ports=10
ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0
ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
ehci_hcd 0000:00:02.1: park 0
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: supports USB remote wakeup
ehci_hcd 0000:00:02.1: irq 20, io mem 0xdfe7ec00
ehci_hcd 0000:00:02.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.36-hardened-r9 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: created debug files
ohci_hcd 0000:00:02.0: supports USB remote wakeup
ohci_hcd 0000:00:02.0: irq 23, io mem 0xdfe7f000
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
ohci_hcd 0000:00:02.0: hcca frame #0003
ohci_hcd 0000:00:02.0: roothub.a 0100120a POTPGT=1 NOCP NPS NDP=10(10)
ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.36-hardened-r9 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: no over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
cpuidle: using governor ladder
ALSA device list:
No soundcards found.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
sda: sda1 sda2 sda3
NET: Registered protocol family 17
sd 0:0:0:0: [sda] Attached SCSI disk
NET: Registered protocol family 15
rtc_cmos 00:02: setting system clock to 2011-02-18 16:03:04 UTC (1298044984)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ehci_hcd 0000:00:02.1: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1: status 0501 change 0001
ehci_hcd 0000:00:02.1: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2: status 0501 change 0001
ehci_hcd 0000:00:02.1: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 3: status 0501 change 0001
ehci_hcd 0000:00:02.1: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 4: status 0501 change 0001
hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 10 chg 001e evt 0000
hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:02.1: port 1 full speed --> companion
ehci_hcd 0000:00:02.1: GetStatus port:1 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
hub 1-0:1.0: port 1 not reset yet, waiting 50ms
ehci_hcd 0000:00:02.1: GetStatus port:1 status 003802 0 ACK POWER OWNER sig=j CSC
hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:02.1: port 2 full speed --> companion
ehci_hcd 0000:00:02.1: GetStatus port:2 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
ata2: SATA link down (SStatus 0 SControl 300)
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 476k freed
ehci_hcd 0000:00:02.1: GetStatus port:2 status 003802 0 ACK POWER OWNER sig=j CSC
hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:02.1: port 3 high speed
ehci_hcd 0000:00:02.1: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-3: new high speed USB device using ehci_hcd and address 4
ehci_hcd 0000:00:02.1: port 3 high speed
ehci_hcd 0000:00:02.1: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-3: default language 0x0409
usb 1-3: udev 4, busnum 1, minor = 3
usb 1-3: New USB device found, idVendor=04f9, idProduct=002a
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: HL-5240
usb 1-3: Manufacturer: Brother
usb 1-3: SerialNumber: G8J667859
usb 1-3: usb_probe_device
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: adding 1-3:1.0 (config #1, interface 0)
usblp 1-3:1.0: usb_probe_interface
usblp 1-3:1.0: usb_probe_interface - got id
usblp 1-3:1.0: looking for a minor, starting at 0
usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x002A
drivers/usb/core/inode.c: creating file '004'
hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
ehci_hcd 0000:00:02.1: port 4 high speed
ehci_hcd 0000:00:02.1: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-4: new high speed USB device using ehci_hcd and address 5
ehci_hcd 0000:00:02.1: port 4 high speed
ehci_hcd 0000:00:02.1: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-4: skipped 1 descriptor after configuration
usb 1-4: skipped 11 descriptors after interface
usb 1-4: skipped 1 descriptor after endpoint
usb 1-4: skipped 22 descriptors after interface
usb 1-4: skipped 1 descriptor after endpoint
usb 1-4: skipped 4 descriptors after interface
usb 1-4: skipped 2 descriptors after interface
usb 1-4: skipped 1 descriptor after endpoint
usb 1-4: default language 0x0409
usb 1-4: udev 5, busnum 1, minor = 4
usb 1-4: New USB device found, idVendor=046d, idProduct=0991
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-4: SerialNumber: 5DA50FED
usb 1-4: usb_probe_device
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: adding 1-4:1.0 (config #1, interface 0)
usb 1-4: adding 1-4:1.1 (config #1, interface 1)
usb 1-4: adding 1-4:1.2 (config #1, interface 2)
usb 1-4: adding 1-4:1.3 (config #1, interface 3)
drivers/usb/core/inode.c: creating file '005'
hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0006
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 2-1: new full speed USB device using ohci_hcd and address 2
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 2-1: ep0 maxpacket = 8
usb 2-1: default language 0x0409
usb 2-1: udev 2, busnum 2, minor = 129
usb 2-1: New USB device found, idVendor=04f9, idProduct=2028
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: QL-570
usb 2-1: Manufacturer: Brother
usb 2-1: SerialNumber: M8G793141
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
usblp 2-1:1.0: usb_probe_interface
usblp 2-1:1.0: usb_probe_interface - got id
usblp 2-1:1.0: looking for a minor, starting at 0
usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x2028
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
grsec: mount of proc to /proc by /bin/mount[mount:644] uid/euid:0/0 gid/egid:0/0, parent /bin/bash[bash:643] uid/euid:0/0 gid/egid:0/0
grsec: mount of sysfs to /sys by /bin/mount[mount:659] uid/euid:0/0 gid/egid:0/0, parent /bin/bash[bash:658] uid/euid:0/0 gid/egid:0/0
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 2-2: new full speed USB device using ohci_hcd and address 3
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
grsec: mount of udev to /dev by /bin/mount[mount:700] uid/euid:0/0 gid/egid:0/0, parent /bin/bash[bash:674] uid/euid:0/0 gid/egid:0/0
usb 2-2: ep0 maxpacket = 8
usb 2-2: default language 0x0409
usb 2-2: udev 3, busnum 2, minor = 130
usb 2-2: New USB device found, idVendor=0a5f, idProduct=0006
usb 2-2: New USB device strings: Mfr=2, Product=4, SerialNumber=6
usb 2-2: Product: Thrmal 2844
usb 2-2: Manufacturer: UPS ;
usb 2-2: SerialNumber: 64A074201998
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usblp 2-2:1.0: usb_probe_interface
usblp 2-2:1.0: usb_probe_interface - got id
usblp 2-2:1.0: looking for a minor, starting at 0
usblp2: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0006
drivers/usb/core/inode.c: creating file '003'
hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0004
hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0004
udev: starting version 151
udevd (725): /proc/725/oom_adj is deprecated, please use /proc/725/oom_score_adj instead.
grsec: mount of devpts to /dev/pts by /bin/mount[mount:899] uid/euid:0/0 gid/egid:0/0, parent /bin/bash[bash:898] uid/euid:0/0 gid/egid:0/0
EXT3-fs (sda3): using internal journal
grsec: mount of /dev/sda3 to / by /bin/mount[mount:919] uid/euid:0/0 gid/egid:0/0, parent /bin/bash[bash:903] uid/euid:0/0 gid/egid:0/0
grsec: mount of /tmp to /tmp by /bin/mount[mount:985] uid/euid:0/0 gid/egid:0/0, parent /bin/bash[bash:982] uid/euid:0/0 gid/egid:0/0
grsec: mount of shm to /dev/shm by /bin/mount[mount:985] uid/euid:0/0 gid/egid:0/0, parent /bin/bash[bash:982] uid/euid:0/0 gid/egid:0/0
grsec: mount of usbfs to /proc/bus/usb by /bin/mount[mount:993] uid/euid:0/0 gid/egid:0/0, parent /bin/bash[bash:982] uid/euid:0/0 gid/egid:0/0
grsec: mount of binfmt_misc to /proc/sys/fs/binfmt_misc by /bin/mount[mount:995] uid/euid:0/0 gid/egid:0/0, parent /bin/bash[bash:982] uid/euid:0/0 gid/egid:0/0
grsec: time set by /sbin/hwclock[hwclock:1013] uid/euid:0/0 gid/egid:0/0, parent /bin/bash[bash:1012] uid/euid:0/0 gid/egid:0/0
forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
grsec: time set by /usr/sbin/ntpdate[ntpdate:3387] uid/euid:0/0 gid/egid:0/0, parent /sbin/runscript.sh[runscript.sh:3386] uid/euid:0/0 gid/egid:0/0
[drm] nouveau 0000:00:0d.0: unknown parameter 15
[drm] nouveau 0000:00:0d.0: unknown parameter 15
[drm] nouveau 0000:00:0d.0: unknown parameter 16
[drm] nouveau 0000:00:0d.0: Allocating FIFO number 1
[drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:00:0d.0: unknown parameter 15
[drm] nouveau 0000:00:0d.0: Allocating FIFO number 2
[drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 2
[drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A
[-- Attachment #4: Type: text/plain, Size: 181 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Nouveau won't load with GeForce 6150SE nForce 430 (NV40)
[not found] ` <AANLkTikBEFZWJ372gha1mmnMeXk2+nOP+CKvC_891bYX-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2011-03-01 0:20 ` Grant
0 siblings, 0 replies; 4+ messages in thread
From: Grant @ 2011-03-01 0:20 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
>>> I can't seem to get nouveau to load with my onboard GeForce 6150SE
>>> nForce 430 which I believe is an NV40 chip. I enabled DRM and
>>> DRM_NOUVEAU in the kernel but lspci -v doesn't show any kernel driver
>>> in use and Xorg fails to load the module. It does work with the
>>> nvidia driver. I'm using Gentoo.
>>>
>>> Should nouveau work with my card? If so, any idea what I did wrong?
>>>
>>
>> Please attach a full dmesg.
>
> I switched everything over to nvidia, then back to nouveau, and lspci
> -v does show the nouveau kernel module in use but X doesn't start
> properly. The workstation is remote to me and the report I received
> upon starting X was that the screen image was "scrambled" and
> completely unrecognizable. I've attached a full dmesg and Xorg.0.log.
>
> - Grant
Any idea on this? Do you need more info?
- Grant
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-03-01 0:20 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-02-06 0:30 Nouveau won't load with GeForce 6150SE nForce 430 (NV40) Grant
[not found] ` <AANLkTim9QZxKmNwux38ggsp1Y22vzHCja1gV-F2QhsOZ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-02-06 7:31 ` Xavier Chantry
[not found] ` <AANLkTik+NDg8JZoY+oM1mhCyevev3GmLKdnxtwE39yeR-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-02-19 19:25 ` Grant
[not found] ` <AANLkTikBEFZWJ372gha1mmnMeXk2+nOP+CKvC_891bYX-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-03-01 0:20 ` Grant
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.