iputils fails to build due to missing sgmlspl

iputils fails to build due to missing sgmlspl

[AJ ONeal]

This is with a fresh install of oe and bitbake (as per the gumstix docs)

|
/mnt/data/Code/overo-oe/tmp/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../../arm-angstrom-linux-gnueabi/bin/ld:
warning: libc.so, needed by
/mnt/data/Code/overo-oe/tmp/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../../arm-angstrom-linux-gnueabi/lib/libgcc_s.so,
not found (try using -rpath or -rpath-link)
| make -C doc man
| make[1]: Entering directory
`/mnt/data/Code/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/iputils-20071127-r1/iputils_20071127.orig/doc'
| /bin/sh: sgmlspl: command not found
| make[1]: *** [arping.8] Error 127
| make[1]: Leaving directory
`/mnt/data/Code/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/iputils-20071127-r1/iputils_20071127.orig/doc'
| make: *** [man] Error 2
| FATAL: oe_runmake failed


The problem is not solved by
bitbake -c clean iputils; bitbake sgmlspl; bitbake iputils

AJ ONeal

Re: iputils fails to build due to missing sgmlspl

[Tom Rini]

AJ ONeal wrote:
> This is with a fresh install of oe and bitbake (as per the gumstix docs)
> 
> |
> /mnt/data/Code/overo-oe/tmp/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../../arm-angstrom-linux-gnueabi/bin/ld:
> warning: libc.so, needed by
> /mnt/data/Code/overo-oe/tmp/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../../arm-angstrom-linux-gnueabi/lib/libgcc_s.so,
> not found (try using -rpath or -rpath-link)
> | make -C doc man
> | make[1]: Entering directory
> `/mnt/data/Code/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/iputils-20071127-r1/iputils_20071127.orig/doc'
> | /bin/sh: sgmlspl: command not found
> | make[1]: *** [arping.8] Error 127
> | make[1]: Leaving directory
> `/mnt/data/Code/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/iputils-20071127-r1/iputils_20071127.orig/doc'
> | make: *** [man] Error 2
> | FATAL: oe_runmake failed
> 
> 
> The problem is not solved by
> bitbake -c clean iputils; bitbake sgmlspl; bitbake iputils

You would need to do bitbake sgmlspl-native ; bitbake iputils, to get 
sgmlspl that runs on the host.  sgmlspl-native will bring in perl-native 
  and some other stuff, FYI.

-- 
Tom Rini
Mentor Graphics Corporation

Re: iputils fails to build due to missing sgmlspl

[AJ ONeal]

Actually, that's what I did. I just typed it wrong when I put it in the
e-mail. There is no non-native sgmlspl package.

AJ ONeal

On Fri, Aug 13, 2010 at 3:32 PM, Tom Rini <tom_rini@mentor.com> wrote:

> AJ ONeal wrote:
>
>> This is with a fresh install of oe and bitbake (as per the gumstix docs)
>>
>> |
>>
>> /mnt/data/Code/overo-oe/tmp/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../../arm-angstrom-linux-gnueabi/bin/ld:
>> warning: libc.so, needed by
>>
>> /mnt/data/Code/overo-oe/tmp/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../../arm-angstrom-linux-gnueabi/lib/libgcc_s.so,
>> not found (try using -rpath or -rpath-link)
>> | make -C doc man
>> | make[1]: Entering directory
>>
>> `/mnt/data/Code/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/iputils-20071127-r1/iputils_20071127.orig/doc'
>> | /bin/sh: sgmlspl: command not found
>> | make[1]: *** [arping.8] Error 127
>> | make[1]: Leaving directory
>>
>> `/mnt/data/Code/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/iputils-20071127-r1/iputils_20071127.orig/doc'
>> | make: *** [man] Error 2
>> | FATAL: oe_runmake failed
>>
>>
>> The problem is not solved by
>> bitbake -c clean iputils; bitbake sgmlspl; bitbake iputils
>>
>
> You would need to do bitbake sgmlspl-native ; bitbake iputils, to get
> sgmlspl that runs on the host.  sgmlspl-native will bring in perl-native
>  and some other stuff, FYI.
>
> --
> Tom Rini
> Mentor Graphics Corporation
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>

Re: iputils fails to build due to missing sgmlspl

[AJ ONeal]

Seems that it was a hanging environment issue. I exited from the current
shell, opened a new one, ran the same thing a third time and it worked.

AJ ONeal


On Fri, Aug 13, 2010 at 4:05 PM, AJ ONeal <coolaj86@gmail.com> wrote:

> Actually, that's what I did. I just typed it wrong when I put it in the
> e-mail. There is no non-native sgmlspl package.
>
> AJ ONeal
>
>
> On Fri, Aug 13, 2010 at 3:32 PM, Tom Rini <tom_rini@mentor.com> wrote:
>
>> AJ ONeal wrote:
>>
>>> This is with a fresh install of oe and bitbake (as per the gumstix docs)
>>>
>>> |
>>>
>>> /mnt/data/Code/overo-oe/tmp/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../../arm-angstrom-linux-gnueabi/bin/ld:
>>> warning: libc.so, needed by
>>>
>>> /mnt/data/Code/overo-oe/tmp/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../../arm-angstrom-linux-gnueabi/lib/libgcc_s.so,
>>> not found (try using -rpath or -rpath-link)
>>> | make -C doc man
>>> | make[1]: Entering directory
>>>
>>> `/mnt/data/Code/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/iputils-20071127-r1/iputils_20071127.orig/doc'
>>> | /bin/sh: sgmlspl: command not found
>>> | make[1]: *** [arping.8] Error 127
>>> | make[1]: Leaving directory
>>>
>>> `/mnt/data/Code/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/iputils-20071127-r1/iputils_20071127.orig/doc'
>>> | make: *** [man] Error 2
>>> | FATAL: oe_runmake failed
>>>
>>>
>>> The problem is not solved by
>>> bitbake -c clean iputils; bitbake sgmlspl; bitbake iputils
>>>
>>
>> You would need to do bitbake sgmlspl-native ; bitbake iputils, to get
>> sgmlspl that runs on the host.  sgmlspl-native will bring in perl-native
>>  and some other stuff, FYI.
>>
>> --
>> Tom Rini
>> Mentor Graphics Corporation
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
>
>

Re: iputils fails to build due to missing sgmlspl

[AJ ONeal]

I was mistaken. It didn't build iputils. I started over from scratch, built
everything up to iputils, and failed!

sgmlspl wasn't installed correctly (not in the path). I tried:
bash-3.2$
cp $OVEROTOP/tmp/work/i686-linux/sgmlspl-native-1.03ii-r0/SGMLSpm/sgmlspl
$OVEROTOP/tmp/sysroots/i686-linux/usr/bin/

but then got another error:
Can't locate SGMLS/Output.pm in @INC (@INC contains: /etc/perl
/usr/local/lib/perl/5.10.0 /usr/local/share/perl/5.10.0 /usr/lib/perl5
/usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10
/usr/local/lib/site_perl .) at
/mnt/data/overo-oe/tmp/sysroots/i686-linux/usr/bin/sgmlspl line 62.

Seeing that is was looking outside of the OE paths and not able to find it,
I gave up.

sudo-apt-get install sgmlspl
bitbake iputils

now it appears to be running...


AJ ONeal
(317) 426-6525


On Fri, Aug 13, 2010 at 6:25 PM, AJ ONeal <coolaj86@gmail.com> wrote:

> Seems that it was a hanging environment issue. I exited from the current
> shell, opened a new one, ran the same thing a third time and it worked.
>
> AJ ONeal
>
>
>
> On Fri, Aug 13, 2010 at 4:05 PM, AJ ONeal <coolaj86@gmail.com> wrote:
>
>> Actually, that's what I did. I just typed it wrong when I put it in the
>> e-mail. There is no non-native sgmlspl package.
>>
>> AJ ONeal
>>
>>
>> On Fri, Aug 13, 2010 at 3:32 PM, Tom Rini <tom_rini@mentor.com> wrote:
>>
>>> AJ ONeal wrote:
>>>
>>>> This is with a fresh install of oe and bitbake (as per the gumstix docs)
>>>>
>>>> |
>>>>
>>>> /mnt/data/Code/overo-oe/tmp/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../../arm-angstrom-linux-gnueabi/bin/ld:
>>>> warning: libc.so, needed by
>>>>
>>>> /mnt/data/Code/overo-oe/tmp/sysroots/i686-linux/usr/armv7a/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../../arm-angstrom-linux-gnueabi/lib/libgcc_s.so,
>>>> not found (try using -rpath or -rpath-link)
>>>> | make -C doc man
>>>> | make[1]: Entering directory
>>>>
>>>> `/mnt/data/Code/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/iputils-20071127-r1/iputils_20071127.orig/doc'
>>>> | /bin/sh: sgmlspl: command not found
>>>> | make[1]: *** [arping.8] Error 127
>>>> | make[1]: Leaving directory
>>>>
>>>> `/mnt/data/Code/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/iputils-20071127-r1/iputils_20071127.orig/doc'
>>>> | make: *** [man] Error 2
>>>> | FATAL: oe_runmake failed
>>>>
>>>>
>>>> The problem is not solved by
>>>> bitbake -c clean iputils; bitbake sgmlspl; bitbake iputils
>>>>
>>>
>>> You would need to do bitbake sgmlspl-native ; bitbake iputils, to get
>>> sgmlspl that runs on the host.  sgmlspl-native will bring in perl-native
>>>  and some other stuff, FYI.
>>>
>>> --
>>> Tom Rini
>>> Mentor Graphics Corporation
>>>
>>> _______________________________________________
>>> Openembedded-devel mailing list
>>> Openembedded-devel@lists.openembedded.org
>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>>
>>
>>
>

Re: iputils fails to build due to missing sgmlspl

[Denys Dmytriyenko]

On Sat, Aug 14, 2010 at 09:35:02AM -0600, AJ ONeal wrote:

> I was mistaken. It didn't build iputils. I started over from scratch, built
> everything up to iputils, and failed!
> 
> sgmlspl wasn't installed correctly (not in the path). I tried:
> bash-3.2$
> cp $OVEROTOP/tmp/work/i686-linux/sgmlspl-native-1.03ii-r0/SGMLSpm/sgmlspl
> $OVEROTOP/tmp/sysroots/i686-linux/usr/bin/
> 
> but then got another error:
> Can't locate SGMLS/Output.pm in @INC (@INC contains: /etc/perl
> /usr/local/lib/perl/5.10.0 /usr/local/share/perl/5.10.0 /usr/lib/perl5
> /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10
> /usr/local/lib/site_perl .) at
> /mnt/data/overo-oe/tmp/sysroots/i686-linux/usr/bin/sgmlspl line 62.
> 
> Seeing that is was looking outside of the OE paths and not able to find it,
> I gave up.
> 
> sudo-apt-get install sgmlspl
> bitbake iputils
> 
> now it appears to be running...

BTW, I think it has just been fixed:

http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=4511027a40d9659d944ff2e02503d51536af92a6

-- 
Denys

Re: iputils fails to build due to missing sgmlspl

[Frans Meulenbroeks]

2010/8/20 Denys Dmytriyenko <denis@denix.org>:
> On Sat, Aug 14, 2010 at 09:35:02AM -0600, AJ ONeal wrote:
>
>> I was mistaken. It didn't build iputils. I started over from scratch, built
>> everything up to iputils, and failed!
>>
[...]

>> sudo-apt-get install sgmlspl
>> bitbake iputils

That is a workaround which works because then you're using the native
sgmlspl (which is probably not too desirable wrt reproducability on
other systems).
>>
>> now it appears to be running...
>
> BTW, I think it has just been fixed:
>
> http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=4511027a40d9659d944ff2e02503d51536af92a6

Yup. I bumped into the same issue (being unawara of this thread).
sgmlspl-native did not export its executable, only a -dev pacakge
(which might have sufficed at some point in time).
I just let it stage all its files. After that for me iputils builds fine.

Enjoy, Frans