* [PATCH 1/3] omap4 hsmmc : Adding card detect support for MMC1
@ 2010-08-30 17:48 kishore kadiyala
2010-08-31 5:55 ` Matt Fleming
0 siblings, 1 reply; 3+ messages in thread
From: kishore kadiyala @ 2010-08-30 17:48 UTC (permalink / raw)
To: linux-mmc, linux-omap; +Cc: tony, akpm, madhu.cr, adrian.hunter
Adding card detect callback function and card detect configuration
function for MMC1 Controller.
Card detect configuration function does initial configuration of the
MMC Control & PullUp-PullDown registers of Phoenix.
For MMC1 Controller, Card detect interrupt source is
twl6030 and the card detect call back function provides card present/absent
status by reading MMC Control register.
Cc: Tony Lindgren <tony@atomide.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
---
arch/arm/mach-omap2/board-4430sdp.c | 7 +++-
drivers/mfd/twl6030-irq.c | 76 +++++++++++++++++++++++++++++++++++
drivers/mmc/host/omap_hsmmc.c | 4 +-
include/linux/i2c/twl.h | 31 ++++++++++++++
4 files changed, 115 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 9447644..a49f285 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -227,9 +227,14 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev)
struct omap_mmc_platform_data *pdata = dev->platform_data;
/* Setting MMC1 Card detect Irq */
- if (pdev->id == 0)
+ if (pdev->id == 0) {
+ ret = twl6030_mmc_card_detect_config();
+ if (ret)
+ pr_err("Failed configuring MMC1 card detect\n");
pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
MMCDETECT_INTR_OFFSET;
+ pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+ }
return ret;
}
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index 10bf228..91a6a45 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -36,6 +36,7 @@
#include <linux/irq.h>
#include <linux/kthread.h>
#include <linux/i2c/twl.h>
+#include <linux/platform_device.h>
/*
* TWL6030 (unlike its predecessors, which had two level interrupt handling)
@@ -223,6 +224,81 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
}
EXPORT_SYMBOL(twl6030_interrupt_mask);
+int twl6030_mmc_card_detect_config(void)
+{
+ int ret;
+ u8 reg_val = 0;
+
+ /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
+ if (twl_class_is_6030()) {
+ twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+ REG_INT_MSK_LINE_B);
+ twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+ REG_INT_MSK_STS_B);
+ }
+
+ /*
+ * Intially Configuring MMC_CTRL for receving interrupts &
+ * Card status on TWL6030 for MMC1
+ */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
+ return ret;
+ }
+ reg_val &= ~VMMC_AUTO_OFF;
+ reg_val |= SW_FC;
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
+ if (ret < 0) {
+ return ret;
+ pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
+ }
+
+ /* Configuring PullUp-PullDown register */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val,
+ TWL6030_CFG_INPUT_PUPD3);
+ if (ret < 0) {
+ return ret;
+ pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
+ ret);
+ }
+ reg_val &= ~(MMC_PU | MMC_PD);
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
+ TWL6030_CFG_INPUT_PUPD3);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
+ ret);
+ return ret;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
+
+int twl6030_mmc_card_detect(struct device *dev, int slot)
+{
+ int ret = -EIO;
+ u8 read_reg = 0;
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+
+ switch (pdev->id) {
+ case 0:
+ /*
+ * BIT0 of REG_MMC_CTRL
+ * 0 - Card not present ,1 - Card present
+ */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
+ TWL6030_MMCCTRL);
+ if (ret >= 0)
+ ret = read_reg & STS_MMC;
+ break;
+ default:
+ pr_err("Unkown MMC controller %d in %s\n", pdev->id, __func__);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(twl6030_mmc_card_detect);
+
int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
{
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 4a8776f..caa0163 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -466,8 +466,6 @@ static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
int ret;
if (gpio_is_valid(pdata->slots[0].switch_pin)) {
- pdata->suspend = omap_hsmmc_suspend_cdirq;
- pdata->resume = omap_hsmmc_resume_cdirq;
if (pdata->slots[0].cover)
pdata->slots[0].get_cover_state =
omap_hsmmc_get_cover_state;
@@ -2203,6 +2201,8 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
"Unable to grab MMC CD IRQ\n");
goto err_irq_cd;
}
+ pdata->suspend = omap_hsmmc_suspend_cdirq;
+ pdata->resume = omap_hsmmc_resume_cdirq;
}
omap_hsmmc_disable_irq(host);
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 6de90bf..4c97161 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -141,6 +141,16 @@
#define TWL6030_CHARGER_CTRL_INT_MASK 0x10
#define TWL6030_CHARGER_FAULT_INT_MASK 0x60
+#define TWL6030_MMCCTRL 0xEE
+#define VMMC_AUTO_OFF (0x1 << 3)
+#define SW_FC (0x1 << 2)
+#define STS_MMC 0x1
+
+#define TWL6030_CFG_INPUT_PUPD3 0xF2
+#define MMC_PU (0x1 << 3)
+#define MMC_PD (0x1 << 2)
+
+
#define TWL4030_CLASS_ID 0x4030
#define TWL6030_CLASS_ID 0x6030
@@ -173,6 +183,27 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
+/* Card detect Configuration for MMC1 Controller on OMAP4 */
+#ifdef(CONFIG_TWL4030_CORE)
+int twl6030_mmc_card_detect_config(void);
+#else
+static inline int twl6030_mmc_card_detect_config(void)
+{
+ pr_err("twl6030_mmc_card_detect_config not supported\n");
+ return 0;
+}
+#endif
+
+/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
+#if defined(CONFIG_TWL4030_CORE)
+int twl6030_mmc_card_detect(struct device *dev, int slot);
+#else
+static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
+{
+ pr_err("Call back twl6030_mmc_card_detect not supported\n");
+ return -EIO;
+}
+#endif
/*----------------------------------------------------------------------*/
/*
--
1.7.0.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/3] omap4 hsmmc : Adding card detect support for MMC1
2010-08-30 17:48 [PATCH 1/3] omap4 hsmmc : Adding card detect support for MMC1 kishore kadiyala
@ 2010-08-31 5:55 ` Matt Fleming
2010-08-31 6:23 ` kishore kadiyala
0 siblings, 1 reply; 3+ messages in thread
From: Matt Fleming @ 2010-08-31 5:55 UTC (permalink / raw)
To: kishore kadiyala
Cc: linux-mmc, linux-omap, tony, akpm, madhu.cr, adrian.hunter
On Mon, Aug 30, 2010 at 11:18:23PM +0530, kishore kadiyala wrote:
> Adding card detect callback function and card detect configuration
> function for MMC1 Controller.
>
> Card detect configuration function does initial configuration of the
> MMC Control & PullUp-PullDown registers of Phoenix.
>
> For MMC1 Controller, Card detect interrupt source is
> twl6030 and the card detect call back function provides card present/absent
> status by reading MMC Control register.
>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Adrian Hunter <adrian.hunter@nokia.com>
> Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
[...]
> @@ -223,6 +224,81 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
> }
> EXPORT_SYMBOL(twl6030_interrupt_mask);
>
> +int twl6030_mmc_card_detect_config(void)
> +{
> + int ret;
> + u8 reg_val = 0;
> +
> + /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
> + if (twl_class_is_6030()) {
> + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
> + REG_INT_MSK_LINE_B);
> + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
> + REG_INT_MSK_STS_B);
> + }
> +
> + /*
> + * Intially Configuring MMC_CTRL for receving interrupts &
> + * Card status on TWL6030 for MMC1
> + */
> + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL);
> + if (ret < 0) {
> + pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
> + return ret;
> + }
> + reg_val &= ~VMMC_AUTO_OFF;
> + reg_val |= SW_FC;
> + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
> + if (ret < 0) {
> + return ret;
> + pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
> + }
Shouldn't this be
pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
return ret;
?
> +
> + /* Configuring PullUp-PullDown register */
> + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val,
> + TWL6030_CFG_INPUT_PUPD3);
> + if (ret < 0) {
> + return ret;
> + pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
> + ret);
Shouldn't this be,
pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
ret);
return ret;
?
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 1/3] omap4 hsmmc : Adding card detect support for MMC1
2010-08-31 5:55 ` Matt Fleming
@ 2010-08-31 6:23 ` kishore kadiyala
0 siblings, 0 replies; 3+ messages in thread
From: kishore kadiyala @ 2010-08-31 6:23 UTC (permalink / raw)
To: Matt Fleming
Cc: kishore kadiyala, linux-mmc, linux-omap, tony, akpm, madhu.cr,
adrian.hunter
Oops my fault .... will correct it and repost ...
Regards,
Kishore
On Tue, Aug 31, 2010 at 11:25 AM, Matt Fleming <matt@console-pimps.org> wrote:
> On Mon, Aug 30, 2010 at 11:18:23PM +0530, kishore kadiyala wrote:
>> Adding card detect callback function and card detect configuration
>> function for MMC1 Controller.
>>
>> Card detect configuration function does initial configuration of the
>> MMC Control & PullUp-PullDown registers of Phoenix.
>>
>> For MMC1 Controller, Card detect interrupt source is
>> twl6030 and the card detect call back function provides card present/absent
>> status by reading MMC Control register.
>>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Adrian Hunter <adrian.hunter@nokia.com>
>> Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
>> Cc: Andrew Morton <akpm@linux-foundation.org>
>> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
>
> [...]
>
>> @@ -223,6 +224,81 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
>> }
>> EXPORT_SYMBOL(twl6030_interrupt_mask);
>>
>> +int twl6030_mmc_card_detect_config(void)
>> +{
>> + int ret;
>> + u8 reg_val = 0;
>> +
>> + /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
>> + if (twl_class_is_6030()) {
>> + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
>> + REG_INT_MSK_LINE_B);
>> + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
>> + REG_INT_MSK_STS_B);
>> + }
>> +
>> + /*
>> + * Intially Configuring MMC_CTRL for receving interrupts &
>> + * Card status on TWL6030 for MMC1
>> + */
>> + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL);
>> + if (ret < 0) {
>> + pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
>> + return ret;
>> + }
>> + reg_val &= ~VMMC_AUTO_OFF;
>> + reg_val |= SW_FC;
>> + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
>> + if (ret < 0) {
>> + return ret;
>> + pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
>> + }
>
> Shouldn't this be
>
> pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
> return ret;
>
> ?
>
>> +
>> + /* Configuring PullUp-PullDown register */
>> + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val,
>> + TWL6030_CFG_INPUT_PUPD3);
>> + if (ret < 0) {
>> + return ret;
>> + pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
>> + ret);
>
> Shouldn't this be,
>
> pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
> ret);
> return ret;
> ?
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-08-31 6:23 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-08-30 17:48 [PATCH 1/3] omap4 hsmmc : Adding card detect support for MMC1 kishore kadiyala
2010-08-31 5:55 ` Matt Fleming
2010-08-31 6:23 ` kishore kadiyala
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.