[Buildroot] Video4Linux2 on Buildroot

[Buildroot] Video4Linux2 on Buildroot

[Neil Benn]

Hello,

        I've been trying to get an ARM kernal and rootfs compiled using
buildroot for my beagleboard (I'll do Gumstix as well later on).  I pulled
down buildroot and built the base example without much messing about.  I
could not find anything to enable video4linux2 in the buildroot menuconfig
so I compiled thinking I could change it in the kernel menuconfig but I
cnanot find it there either.  Does anyone know how I can bring in
video4linux2 support into the build from buildroot?

 Thanks for your help.

Cheers,

Neil

-- 
-- 

Neil Benn Msc
Director
Ziath Ltd
Phone :+44 (0)7508 107942
Website - http://www.ziath.com

IMPORTANT NOTICE:  This message, including any attached documents, is
intended only for the use of the individual or entity to which it is
addressed, and may contain information that is privileged, confidential and
exempt from disclosure under applicable law.  If the reader of this message
is not the intended recipient, or the employee or agent responsible for
delivering the message to the intended recipient, you are hereby notified
that any dissemination, distribution or copying of this communication is
strictly prohibited. If you have received this communication in error,
please notify Ziath Ltd immediately by email at info at ziath.com. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100915/0238b48b/attachment.html>

[Buildroot] Video4Linux2 on Buildroot

[Pierre-Luc Simard]

Hello Neil,

V4L2 is indeed in your kernel configuration. It's under Device Drivers--->
Multimedia support ---> Video For Linux

Cheers,

Pierre-Luc


On Wed, Sep 15, 2010 at 1:52 PM, Neil Benn <neil.benn@ziath.com> wrote:

> Hello,
>
>         I've been trying to get an ARM kernal and rootfs compiled using
> buildroot for my beagleboard (I'll do Gumstix as well later on).  I pulled
> down buildroot and built the base example without much messing about.  I
> could not find anything to enable video4linux2 in the buildroot menuconfig
> so I compiled thinking I could change it in the kernel menuconfig but I
> cnanot find it there either.  Does anyone know how I can bring in
> video4linux2 support into the build from buildroot?
>
>  Thanks for your help.
>
> Cheers,
>
> Neil
>
> --
> --
>
> Neil Benn Msc
> Director
> Ziath Ltd
> Phone :+44 (0)7508 107942
> Website - http://www.ziath.com
>
> IMPORTANT NOTICE:  This message, including any attached documents, is
> intended only for the use of the individual or entity to which it is
> addressed, and may contain information that is privileged, confidential and
> exempt from disclosure under applicable law.  If the reader of this message
> is not the intended recipient, or the employee or agent responsible for
> delivering the message to the intended recipient, you are hereby notified
> that any dissemination, distribution or copying of this communication is
> strictly prohibited. If you have received this communication in error,
> please notify Ziath Ltd immediately by email at info at ziath.com. Thank you.
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100915/cbd8c921/attachment-0001.html>

[Buildroot] Video4Linux2 on Buildroot

[Neil Benn]

Hello,

        Thanks, I made the mistake of not clicking the Y but pressing
return.

Cheers,

Neil

On 15 September 2010 19:23, Pierre-Luc Simard
<pierreluc.simard@admetric.ca>wrote:

> Hello Neil,
>
> V4L2 is indeed in your kernel configuration. It's under Device Drivers--->
> Multimedia support ---> Video For Linux
>
> Cheers,
>
> Pierre-Luc
>
>
> On Wed, Sep 15, 2010 at 1:52 PM, Neil Benn <neil.benn@ziath.com> wrote:
>
>> Hello,
>>
>>         I've been trying to get an ARM kernal and rootfs compiled using
>> buildroot for my beagleboard (I'll do Gumstix as well later on).  I pulled
>> down buildroot and built the base example without much messing about.  I
>> could not find anything to enable video4linux2 in the buildroot menuconfig
>> so I compiled thinking I could change it in the kernel menuconfig but I
>> cnanot find it there either.  Does anyone know how I can bring in
>> video4linux2 support into the build from buildroot?
>>
>>  Thanks for your help.
>>
>> Cheers,
>>
>> Neil
>>
>> --
>> --
>>
>> Neil Benn Msc
>> Director
>> Ziath Ltd
>> Phone :+44 (0)7508 107942
>> Website - http://www.ziath.com
>>
>> IMPORTANT NOTICE:  This message, including any attached documents, is
>> intended only for the use of the individual or entity to which it is
>> addressed, and may contain information that is privileged, confidential and
>> exempt from disclosure under applicable law.  If the reader of this message
>> is not the intended recipient, or the employee or agent responsible for
>> delivering the message to the intended recipient, you are hereby notified
>> that any dissemination, distribution or copying of this communication is
>> strictly prohibited. If you have received this communication in error,
>> please notify Ziath Ltd immediately by email at info at ziath.com. Thank
>> you.
>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>>
>
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>



-- 
-- 

Neil Benn Msc
Director
Ziath Ltd
Phone :+44 (0)7508 107942
Website - http://www.ziath.com

IMPORTANT NOTICE:  This message, including any attached documents, is
intended only for the use of the individual or entity to which it is
addressed, and may contain information that is privileged, confidential and
exempt from disclosure under applicable law.  If the reader of this message
is not the intended recipient, or the employee or agent responsible for
delivering the message to the intended recipient, you are hereby notified
that any dissemination, distribution or copying of this communication is
strictly prohibited. If you have received this communication in error,
please notify Ziath Ltd immediately by email at info at ziath.com. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100915/f823dfe7/attachment.html>