* [ath9k-devel] Atheros (9160+9106) device up in AP mode but no signal ??
@ 2010-11-19 1:09 y bhanu
2010-11-19 8:38 ` Mohammed Shafi
0 siblings, 1 reply; 2+ messages in thread
From: y bhanu @ 2010-11-19 1:09 UTC (permalink / raw)
To: ath9k-devel
I am trying to bring up my wireless Card in AP mode.
I can bring up the device and bridge it to the ETH0 port but when I
try to scan from a wireless client device, I don't see any signal of
"Atheros_XSpan".
Any ideas where I should start looking at. i.e. is it the driver or
wireless config tools.
ath0 IEEE 802.11ng ESSID:"Atheros_XSpan" Nickname:""
Mode:Master Frequency:2.432 GHz Access Point: 00:00:83:31:25:33
Bit Rate:auto Tx-Power:18 dBm Sensitivity=1/3
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/94 Signal level=161/162 Noise level=161/161
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Thanks
Mukund
^ permalink raw reply [flat|nested] 2+ messages in thread
* [ath9k-devel] Atheros (9160+9106) device up in AP mode but no signal ??
2010-11-19 1:09 [ath9k-devel] Atheros (9160+9106) device up in AP mode but no signal ?? y bhanu
@ 2010-11-19 8:38 ` Mohammed Shafi
0 siblings, 0 replies; 2+ messages in thread
From: Mohammed Shafi @ 2010-11-19 8:38 UTC (permalink / raw)
To: ath9k-devel
On Fri, Nov 19, 2010 at 6:39 AM, y bhanu <kernelccrazy@gmail.com> wrote:
> I am trying to bring up my wireless Card in AP mode.
> I can bring up the device and bridge it to the ETH0 port but when I
> try to scan from a wireless client device, I don't see any signal of
> "Atheros_XSpan".
> Any ideas where I should start looking at. i.e. is it the driver or
> wireless config tools.
>
>
> ath0 ? ? ?IEEE 802.11ng ?ESSID:"Atheros_XSpan" ?Nickname:""
> ? ? ? ? ?Mode:Master ?Frequency:2.432 GHz ?Access Point: 00:00:83:31:25:33
> ? ? ? ? ?Bit Rate:auto ? Tx-Power:18 dBm ? Sensitivity=1/3
> ? ? ? ? ?Retry:off ? RTS thr:off ? Fragment thr:off
> ? ? ? ? ?Encryption key:off
> ? ? ? ? ?Power Management:off
> ? ? ? ? ?Link Quality=0/94 ?Signal level=161/162 ?Noise level=161/161
> ? ? ? ? ?Rx invalid nwid:0 ?Rx invalid crypt:0 ?Rx invalid frag:0
> ? ? ? ? ?Tx excessive retries:0 ?Invalid misc:0 ? Missed beacon:0
May be this is the problem ? Link Quality=0/94
It will be usually 94/94 in the sheild box.
>
>
> Thanks
> Mukund
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-11-19 8:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-11-19 1:09 [ath9k-devel] Atheros (9160+9106) device up in AP mode but no signal ?? y bhanu
2010-11-19 8:38 ` Mohammed Shafi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.