Register WM8750

Register WM8750

[Marek Vasut]

Properly register WM8750 codec on affected machines now that the WM8750 codec
was converted to new API.

This is not even compile-tested, but should work, please test.

Cheers!

[PATCH 1/2] pxa/spitz: Correctly register WM8750

[Marek Vasut]

This patch registers the WM8750 codec on a proper place on the SPITZ machine
after the WM8750 driver was converted to new API.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/spitz.c |    3 +++
 sound/soc/pxa/spitz.c     |   36 ------------------------------------
 2 files changed, 3 insertions(+), 36 deletions(-)

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4d2413e..c1048a3 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = {
 		.type		= "max7310",
 		.addr		= 0x18,
 		.platform_data	= &akita_ioexp,
+	}, {
+		.type		= "wm8750",
+		.addr		= 0x1b,
 	},
 };
 
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 1941a35..d256f5f 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = {
 	.codec_dev = &soc_codec_dev_wm8750,
 };
 
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8750 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8750_i2c_register(void)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = 0x1b;
-	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(0);
-	if (!adapter) {
-		printk(KERN_ERR "can't get i2c adapter 0\n");
-		return -ENODEV;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		printk(KERN_ERR "can't add i2c device at 0x%x\n",
-		(unsigned int)info.addr);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 static struct platform_device *spitz_snd_device;
 
 static int __init spitz_init(void)
@@ -369,10 +337,6 @@ static int __init spitz_init(void)
 	if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
 		return -ENODEV;
 
-	ret = wm8750_i2c_setup();
-	if (ret != 0)
-		return ret;
-
 	spitz_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!spitz_snd_device)
 		return -ENOMEM;
-- 
1.7.0

[PATCH 2/2] pxa/z2: Register WM8750

[Marek Vasut]

This patch registers the WM8750 codec on a proper place on the ZipitZ2
machine after the WM8750 driver was converted to new API.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/z2.c |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 194865e..3976d24 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -479,7 +479,10 @@ static struct i2c_board_info __initdata z2_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("aer915", 0x55),
 		.platform_data	= &batt_chip_info,
-	}
+	}, {
+		I2C_BOARD_INFO("wm8750", 0x1a),
+	},
+
 };
 
 static void __init z2_i2c_init(void)
-- 
1.7.0

[PATCH 1/2] pxa/spitz: Correctly register WM8750

[Eric Miao]

On Fri, May 28, 2010 at 10:42 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> This patch registers the WM8750 codec on a proper place on the SPITZ machine
> after the WM8750 driver was converted to new API.
>
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Applied to 'fix'.

> ---
> ?arch/arm/mach-pxa/spitz.c | ? ?3 +++
> ?sound/soc/pxa/spitz.c ? ? | ? 36 ------------------------------------
> ?2 files changed, 3 insertions(+), 36 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index 4d2413e..c1048a3 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = {
> ? ? ? ? ? ? ? ?.type ? ? ? ? ? = "max7310",
> ? ? ? ? ? ? ? ?.addr ? ? ? ? ? = 0x18,
> ? ? ? ? ? ? ? ?.platform_data ?= &akita_ioexp,
> + ? ? ? }, {
> + ? ? ? ? ? ? ? .type ? ? ? ? ? = "wm8750",
> + ? ? ? ? ? ? ? .addr ? ? ? ? ? = 0x1b,
> ? ? ? ?},
> ?};
>
> diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
> index 1941a35..d256f5f 100644
> --- a/sound/soc/pxa/spitz.c
> +++ b/sound/soc/pxa/spitz.c
> @@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = {
> ? ? ? ?.codec_dev = &soc_codec_dev_wm8750,
> ?};
>
> -/*
> - * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
> - * New drivers should register the wm8750 I2C device in the machine
> - * setup code (under arch/arm for ARM systems).
> - */
> -static int wm8750_i2c_register(void)
> -{
> - ? ? ? struct i2c_board_info info;
> - ? ? ? struct i2c_adapter *adapter;
> - ? ? ? struct i2c_client *client;
> -
> - ? ? ? memset(&info, 0, sizeof(struct i2c_board_info));
> - ? ? ? info.addr = 0x1b;
> - ? ? ? strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
> -
> - ? ? ? adapter = i2c_get_adapter(0);
> - ? ? ? if (!adapter) {
> - ? ? ? ? ? ? ? printk(KERN_ERR "can't get i2c adapter 0\n");
> - ? ? ? ? ? ? ? return -ENODEV;
> - ? ? ? }
> -
> - ? ? ? client = i2c_new_device(adapter, &info);
> - ? ? ? i2c_put_adapter(adapter);
> - ? ? ? if (!client) {
> - ? ? ? ? ? ? ? printk(KERN_ERR "can't add i2c device at 0x%x\n",
> - ? ? ? ? ? ? ? (unsigned int)info.addr);
> - ? ? ? ? ? ? ? return -ENODEV;
> - ? ? ? }
> -
> - ? ? ? return 0;
> -}
> -
> ?static struct platform_device *spitz_snd_device;
>
> ?static int __init spitz_init(void)
> @@ -369,10 +337,6 @@ static int __init spitz_init(void)
> ? ? ? ?if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
> ? ? ? ? ? ? ? ?return -ENODEV;
>
> - ? ? ? ret = wm8750_i2c_setup();
> - ? ? ? if (ret != 0)
> - ? ? ? ? ? ? ? return ret;
> -
> ? ? ? ?spitz_snd_device = platform_device_alloc("soc-audio", -1);
> ? ? ? ?if (!spitz_snd_device)
> ? ? ? ? ? ? ? ?return -ENOMEM;
> --
> 1.7.0
>
>

[PATCH 1/2] pxa/spitz: Correctly register WM8750

[Mark Brown]

On Fri, May 28, 2010 at 04:45:32AM +0200, Marek Vasut wrote:
> This patch registers the WM8750 codec on a proper place on the SPITZ machine
> after the WM8750 driver was converted to new API.
> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Both

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

[PATCH 1/2] pxa/spitz: Correctly register WM8750

[Marek Vasut]

Dne P? 28. kv?tna 2010 16:17:31 Eric Miao napsal(a):
> On Fri, May 28, 2010 at 9:33 PM, Pavel Machek <pavel@ucw.cz> wrote:
> > On Fri 2010-05-28 04:45:32, Marek Vasut wrote:
> >> This patch registers the WM8750 codec on a proper place on the SPITZ
> >> machine after the WM8750 driver was converted to new API.
> >> 
> >> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> >> ---
> >>  arch/arm/mach-pxa/spitz.c |    3 +++
> >>  sound/soc/pxa/spitz.c     |   36 ------------------------------------
> >>  2 files changed, 3 insertions(+), 36 deletions(-)
> > 
> > I got rejects on second file when trying to apply it on 2.6.34...?

Apply it by hand, the patch is obvious. This is based on Eric's -devel, latest 
edition (updated before sending this), maybe you have local changes?

Marek
> 
> Pavel,
> 
> Could you give it a quick test? It does solve a building issue of
> spitz.
> 
> >                                                                      
> >  Pavel
> > 
> >> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> >> index 4d2413e..c1048a3 100644
> >> --- a/arch/arm/mach-pxa/spitz.c
> >> +++ b/arch/arm/mach-pxa/spitz.c
> >> @@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[]
> >> = { .type           = "max7310",
> >>               .addr           = 0x18,
> >>               .platform_data  = &akita_ioexp,
> >> +     }, {
> >> +             .type           = "wm8750",
> >> +             .addr           = 0x1b,
> >>       },
> >>  };
> >> 
> >> diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
> >> index 1941a35..d256f5f 100644
> >> --- a/sound/soc/pxa/spitz.c
> >> +++ b/sound/soc/pxa/spitz.c
> >> @@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = {
> >>       .codec_dev = &soc_codec_dev_wm8750,
> >>  };
> >> 
> >> -/*
> >> - * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
> >> - * New drivers should register the wm8750 I2C device in the machine
> >> - * setup code (under arch/arm for ARM systems).
> >> - */
> >> -static int wm8750_i2c_register(void)
> >> -{
> >> -     struct i2c_board_info info;
> >> -     struct i2c_adapter *adapter;
> >> -     struct i2c_client *client;
> >> -
> >> -     memset(&info, 0, sizeof(struct i2c_board_info));
> >> -     info.addr = 0x1b;
> >> -     strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
> >> -
> >> -     adapter = i2c_get_adapter(0);
> >> -     if (!adapter) {
> >> -             printk(KERN_ERR "can't get i2c adapter 0\n");
> >> -             return -ENODEV;
> >> -     }
> >> -
> >> -     client = i2c_new_device(adapter, &info);
> >> -     i2c_put_adapter(adapter);
> >> -     if (!client) {
> >> -             printk(KERN_ERR "can't add i2c device at 0x%x\n",
> >> -             (unsigned int)info.addr);
> >> -             return -ENODEV;
> >> -     }
> >> -
> >> -     return 0;
> >> -}
> >> -
> >>  static struct platform_device *spitz_snd_device;
> >> 
> >>  static int __init spitz_init(void)
> >> @@ -369,10 +337,6 @@ static int __init spitz_init(void)
> >>       if (!(machine_is_spitz() || machine_is_borzoi() ||
> >> machine_is_akita())) return -ENODEV;
> >> 
> >> -     ret = wm8750_i2c_setup();
> >> -     if (ret != 0)
> >> -             return ret;
> >> -
> >>       spitz_snd_device = platform_device_alloc("soc-audio", -1);
> >>       if (!spitz_snd_device)
> >>               return -ENOMEM;
> > 
> > --
> > (english) http://www.livejournal.com/~pavelmachek
> > (cesky, pictures)
> > http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[PATCH 1/2] pxa/spitz: Correctly register WM8750

[Eric Miao]

On Fri, May 28, 2010 at 9:33 PM, Pavel Machek <pavel@ucw.cz> wrote:
> On Fri 2010-05-28 04:45:32, Marek Vasut wrote:
>> This patch registers the WM8750 codec on a proper place on the SPITZ machine
>> after the WM8750 driver was converted to new API.
>>
>> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
>> ---
>> ?arch/arm/mach-pxa/spitz.c | ? ?3 +++
>> ?sound/soc/pxa/spitz.c ? ? | ? 36 ------------------------------------
>> ?2 files changed, 3 insertions(+), 36 deletions(-)
>
> I got rejects on second file when trying to apply it on 2.6.34...?

Pavel,

Could you give it a quick test? It does solve a building issue of
spitz.

> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?Pavel
>
>>
>> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
>> index 4d2413e..c1048a3 100644
>> --- a/arch/arm/mach-pxa/spitz.c
>> +++ b/arch/arm/mach-pxa/spitz.c
>> @@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = {
>> ? ? ? ? ? ? ? .type ? ? ? ? ? = "max7310",
>> ? ? ? ? ? ? ? .addr ? ? ? ? ? = 0x18,
>> ? ? ? ? ? ? ? .platform_data ?= &akita_ioexp,
>> + ? ? }, {
>> + ? ? ? ? ? ? .type ? ? ? ? ? = "wm8750",
>> + ? ? ? ? ? ? .addr ? ? ? ? ? = 0x1b,
>> ? ? ? },
>> ?};
>>
>> diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
>> index 1941a35..d256f5f 100644
>> --- a/sound/soc/pxa/spitz.c
>> +++ b/sound/soc/pxa/spitz.c
>> @@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = {
>> ? ? ? .codec_dev = &soc_codec_dev_wm8750,
>> ?};
>>
>> -/*
>> - * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
>> - * New drivers should register the wm8750 I2C device in the machine
>> - * setup code (under arch/arm for ARM systems).
>> - */
>> -static int wm8750_i2c_register(void)
>> -{
>> - ? ? struct i2c_board_info info;
>> - ? ? struct i2c_adapter *adapter;
>> - ? ? struct i2c_client *client;
>> -
>> - ? ? memset(&info, 0, sizeof(struct i2c_board_info));
>> - ? ? info.addr = 0x1b;
>> - ? ? strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
>> -
>> - ? ? adapter = i2c_get_adapter(0);
>> - ? ? if (!adapter) {
>> - ? ? ? ? ? ? printk(KERN_ERR "can't get i2c adapter 0\n");
>> - ? ? ? ? ? ? return -ENODEV;
>> - ? ? }
>> -
>> - ? ? client = i2c_new_device(adapter, &info);
>> - ? ? i2c_put_adapter(adapter);
>> - ? ? if (!client) {
>> - ? ? ? ? ? ? printk(KERN_ERR "can't add i2c device at 0x%x\n",
>> - ? ? ? ? ? ? (unsigned int)info.addr);
>> - ? ? ? ? ? ? return -ENODEV;
>> - ? ? }
>> -
>> - ? ? return 0;
>> -}
>> -
>> ?static struct platform_device *spitz_snd_device;
>>
>> ?static int __init spitz_init(void)
>> @@ -369,10 +337,6 @@ static int __init spitz_init(void)
>> ? ? ? if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
>> ? ? ? ? ? ? ? return -ENODEV;
>>
>> - ? ? ret = wm8750_i2c_setup();
>> - ? ? if (ret != 0)
>> - ? ? ? ? ? ? return ret;
>> -
>> ? ? ? spitz_snd_device = platform_device_alloc("soc-audio", -1);
>> ? ? ? if (!spitz_snd_device)
>> ? ? ? ? ? ? ? return -ENOMEM;
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
>

[PATCH 1/2] pxa/spitz: Correctly register WM8750

[Pavel Machek]

On Fri 2010-05-28 04:45:32, Marek Vasut wrote:
> This patch registers the WM8750 codec on a proper place on the SPITZ machine
> after the WM8750 driver was converted to new API.
> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> ---
>  arch/arm/mach-pxa/spitz.c |    3 +++
>  sound/soc/pxa/spitz.c     |   36 ------------------------------------
>  2 files changed, 3 insertions(+), 36 deletions(-)

I got rejects on second file when trying to apply it on 2.6.34...?
									Pavel

> 
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index 4d2413e..c1048a3 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = {
>  		.type		= "max7310",
>  		.addr		= 0x18,
>  		.platform_data	= &akita_ioexp,
> +	}, {
> +		.type		= "wm8750",
> +		.addr		= 0x1b,
>  	},
>  };
>  
> diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
> index 1941a35..d256f5f 100644
> --- a/sound/soc/pxa/spitz.c
> +++ b/sound/soc/pxa/spitz.c
> @@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = {
>  	.codec_dev = &soc_codec_dev_wm8750,
>  };
>  
> -/*
> - * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
> - * New drivers should register the wm8750 I2C device in the machine
> - * setup code (under arch/arm for ARM systems).
> - */
> -static int wm8750_i2c_register(void)
> -{
> -	struct i2c_board_info info;
> -	struct i2c_adapter *adapter;
> -	struct i2c_client *client;
> -
> -	memset(&info, 0, sizeof(struct i2c_board_info));
> -	info.addr = 0x1b;
> -	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
> -
> -	adapter = i2c_get_adapter(0);
> -	if (!adapter) {
> -		printk(KERN_ERR "can't get i2c adapter 0\n");
> -		return -ENODEV;
> -	}
> -
> -	client = i2c_new_device(adapter, &info);
> -	i2c_put_adapter(adapter);
> -	if (!client) {
> -		printk(KERN_ERR "can't add i2c device at 0x%x\n",
> -		(unsigned int)info.addr);
> -		return -ENODEV;
> -	}
> -
> -	return 0;
> -}
> -
>  static struct platform_device *spitz_snd_device;
>  
>  static int __init spitz_init(void)
> @@ -369,10 +337,6 @@ static int __init spitz_init(void)
>  	if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
>  		return -ENODEV;
>  
> -	ret = wm8750_i2c_setup();
> -	if (ret != 0)
> -		return ret;
> -
>  	spitz_snd_device = platform_device_alloc("soc-audio", -1);
>  	if (!spitz_snd_device)
>  		return -ENOMEM;

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[PATCH 1/2] pxa/spitz: Correctly register WM8750

[Marek Vasut]

This patch registers the WM8750 codec on a proper place on the SPITZ machine
after the WM8750 driver was converted to new API.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/spitz.c |    3 +++
 sound/soc/pxa/spitz.c     |   36 ------------------------------------
 2 files changed, 3 insertions(+), 36 deletions(-)

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4d2413e..c1048a3 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = {
 		.type		= "max7310",
 		.addr		= 0x18,
 		.platform_data	= &akita_ioexp,
+	}, {
+		.type		= "wm8750",
+		.addr		= 0x1b,
 	},
 };
 
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 1941a35..d256f5f 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = {
 	.codec_dev = &soc_codec_dev_wm8750,
 };
 
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8750 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8750_i2c_register(void)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = 0x1b;
-	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(0);
-	if (!adapter) {
-		printk(KERN_ERR "can't get i2c adapter 0\n");
-		return -ENODEV;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		printk(KERN_ERR "can't add i2c device at 0x%x\n",
-		(unsigned int)info.addr);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 static struct platform_device *spitz_snd_device;
 
 static int __init spitz_init(void)
@@ -369,10 +337,6 @@ static int __init spitz_init(void)
 	if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
 		return -ENODEV;
 
-	ret = wm8750_i2c_setup();
-	if (ret != 0)
-		return ret;
-
 	spitz_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!spitz_snd_device)
 		return -ENOMEM;
-- 
1.7.0