[PATCH] trivial: nandsim.c spell fixes in comments

[PATCH] trivial: nandsim.c spell fixes in comments

[srimugunthan dhandapani]

[-- Attachment #1.1: Type: text/plain, Size: 3723 bytes --]

attached patch has trivial spell fixes in comments in nandsim.c
Signed-off-by: srimugunthan  <srimugunthan.dhandapani@gmail.com>

------
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index a6a73aa..697979c 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -230,7 +230,7 @@ MODULE_PARM_DESC(bbt,         "0 OOB, 1 BBT with marker
in OOB, 2 BBT with marker in d
 #define STATE_ADDR_ZERO        0x00000040 /* one byte zero address was
accepted */
 #define STATE_ADDR_MASK        0x00000070 /* address states mask */

-/* Durind data input/output the simulator is in these states */
+/* During data input/output the simulator is in these states */
 #define STATE_DATAIN           0x00000100 /* waiting for data input */
 #define STATE_DATAIN_MASK      0x00000100 /* data input states mask */

@@ -263,18 +263,18 @@ MODULE_PARM_DESC(bbt,         "0 OOB, 1 BBT with
marker in OOB, 2 BBT with marker in d
 #define OPT_PAGE512      0x00000002 /* 512-byte  page chips */
 #define OPT_PAGE2048     0x00000008 /* 2048-byte page chips */
 #define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
-#define OPT_AUTOINCR     0x00000020 /* page number auto inctimentation is
possible */
+#define OPT_AUTOINCR     0x00000020 /* page number auto incrementation is
possible */
 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus
width */
 #define OPT_PAGE4096     0x00000080 /* 4096-byte page chips */
 #define OPT_LARGEPAGE    (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte
page chips */
 #define OPT_SMALLPAGE    (OPT_PAGE256  | OPT_PAGE512)  /* 256 and 512-byte
page chips */

-/* Remove action bits ftom state */
+/* Remove action bits from state */
 #define NS_STATE(x) ((x) & ~ACTION_MASK)

 /*
  * Maximum previous states which need to be saved. Currently saving is
- * only needed for page programm operation with preceeded read command
+ * only needed for page programm operation with preceded read command
  * (which is only valid for 512-byte pages).
  */
 #define NS_MAX_PREVSTATES 1
@@ -1171,9 +1171,9 @@ static inline void switch_to_ready_state(struct
nandsim *ns, u_char status)
  * of supported operations.
  *
  * Operation can be unknown because of the following.
- *   1. New command was accepted and this is the firs call to find the
+ *   1. New command was accepted and this is the first call to find the
  *      correspondent states chain. In this case ns->npstates = 0;
- *   2. There is several operations which begin with the same command(s)
+ *   2. There are several operations which begin with the same command(s)
  *      (for example program from the second half and read from the
  *      second half operations both begin with the READ1 command). In this
  *      case the ns->pstates[] array contains previous states.
@@ -1186,7 +1186,7 @@ static inline void switch_to_ready_state(struct
nandsim *ns, u_char status)
  * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
  * zeroed).
  *
- * If there are several maches, the current state is pushed to the
+ * If there are several matches, the current state is pushed to the
  * ns->pstates.
  *
  * The operation can be unknown only while commands are input to the chip.
@@ -1195,7 +1195,7 @@ static inline void switch_to_ready_state(struct
nandsim *ns, u_char status)
  * operation is searched using the following pattern:
  *     ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
  *
- * It is supposed that this pattern must either match one operation on
+ * It is supposed that this pattern must either match one operation or
  * none. There can't be ambiguity in that case.
  *
  * If no matches found, the functions does the following:

[-- Attachment #1.2: Type: text/html, Size: 4191 bytes --]

[-- Attachment #2: spell_fix_patch --]
[-- Type: application/octet-stream, Size: 3578 bytes --]

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index a6a73aa..697979c 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -230,7 +230,7 @@ MODULE_PARM_DESC(bbt,		 "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in d
 #define STATE_ADDR_ZERO        0x00000040 /* one byte zero address was accepted */
 #define STATE_ADDR_MASK        0x00000070 /* address states mask */
 
-/* Durind data input/output the simulator is in these states */
+/* During data input/output the simulator is in these states */
 #define STATE_DATAIN           0x00000100 /* waiting for data input */
 #define STATE_DATAIN_MASK      0x00000100 /* data input states mask */
 
@@ -263,18 +263,18 @@ MODULE_PARM_DESC(bbt,		 "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in d
 #define OPT_PAGE512      0x00000002 /* 512-byte  page chips */
 #define OPT_PAGE2048     0x00000008 /* 2048-byte page chips */
 #define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
-#define OPT_AUTOINCR     0x00000020 /* page number auto inctimentation is possible */
+#define OPT_AUTOINCR     0x00000020 /* page number auto incrementation is possible */
 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
 #define OPT_PAGE4096     0x00000080 /* 4096-byte page chips */
 #define OPT_LARGEPAGE    (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
 #define OPT_SMALLPAGE    (OPT_PAGE256  | OPT_PAGE512)  /* 256 and 512-byte page chips */
 
-/* Remove action bits ftom state */
+/* Remove action bits from state */
 #define NS_STATE(x) ((x) & ~ACTION_MASK)
 
 /*
  * Maximum previous states which need to be saved. Currently saving is
- * only needed for page programm operation with preceeded read command
+ * only needed for page programm operation with preceded read command
  * (which is only valid for 512-byte pages).
  */
 #define NS_MAX_PREVSTATES 1
@@ -1171,9 +1171,9 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
  * of supported operations.
  *
  * Operation can be unknown because of the following.
- *   1. New command was accepted and this is the firs call to find the
+ *   1. New command was accepted and this is the first call to find the
  *      correspondent states chain. In this case ns->npstates = 0;
- *   2. There is several operations which begin with the same command(s)
+ *   2. There are several operations which begin with the same command(s)
  *      (for example program from the second half and read from the
  *      second half operations both begin with the READ1 command). In this
  *      case the ns->pstates[] array contains previous states.
@@ -1186,7 +1186,7 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
  * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
  * zeroed).
  *
- * If there are several maches, the current state is pushed to the
+ * If there are several matches, the current state is pushed to the
  * ns->pstates.
  *
  * The operation can be unknown only while commands are input to the chip.
@@ -1195,7 +1195,7 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
  * operation is searched using the following pattern:
  *     ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
  *
- * It is supposed that this pattern must either match one operation on
+ * It is supposed that this pattern must either match one operation or
  * none. There can't be ambiguity in that case.
  *
  * If no matches found, the functions does the following:

RE: [PATCH] trivial: nandsim.c spell fixes in comments

[Jon Povey]

linux-mtd-bounces@lists.infradead.org wrote:
> attached patch has trivial spell fixes in comments in nandsim.c
> Signed-off-by: srimugunthan  <srimugunthan.dhandapani@gmail.com>
>
> ------
> diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
> index a6a73aa..697979c 100644 --- a/drivers/mtd/nand/nandsim.c
> +++ b/drivers/mtd/nand/nandsim.c

...

> - * only needed for page programm operation with preceeded read command
> + * only needed for page programm operation with preceded read command

Might as well fix programm -> program while you are there?

--
Jon Povey
jon.povey@racelogic.co.uk

Racelogic is a limited company registered in England. Registered number 2743719 .
Registered Office Unit 10, Swan Business Centre, Osier Way, Buckingham, Bucks, MK18 1TB .

The information contained in this electronic mail transmission is intended by Racelogic Ltd for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. The views expressed by the sender of this communication do not necessarily represent those of Racelogic Ltd. Please note that Racelogic reserves the right to monitor e-mail communications passing through its network

RE: [PATCH] trivial: nandsim.c spell fixes in comments

[Jon Povey]

linux-mtd-bounces@lists.infradead.org wrote:
> attached patch has trivial spell fixes in comments in nandsim.c
> Signed-off-by: srimugunthan  <srimugunthan.dhandapani@gmail.com>
>
> ------
> diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
> index a6a73aa..697979c 100644 --- a/drivers/mtd/nand/nandsim.c
> +++ b/drivers/mtd/nand/nandsim.c

...

> - * only needed for page programm operation with preceeded read command
> + * only needed for page programm operation with preceded read command

Might as well fix programm -> program while you are there?

--
Jon Povey
jon.povey@racelogic.co.uk

Racelogic is a limited company registered in England. Registered number 2743719 .
Registered Office Unit 10, Swan Business Centre, Osier Way, Buckingham, Bucks, MK18 1TB .

The information contained in this electronic mail transmission is intended by Racelogic Ltd for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. The views expressed by the sender of this communication do not necessarily represent those of Racelogic Ltd. Please note that Racelogic reserves the right to monitor e-mail communications passing through its network

RE: [PATCH] trivial: nandsim.c spell fixes in comments

[srimugunthan dhandapani]

[-- Attachment #1.1: Type: text/plain, Size: 7696 bytes --]

attached patch fixes the program->programm and other  spellfixes in comments
in nandsim.c

Signed-off-by: srimugunthan  <srimugunthan.dhandapani@gmail.com>

-----
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index a6a73aa..c45e06f 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -210,12 +210,12 @@ MODULE_PARM_DESC(bbt,         "0 OOB, 1 BBT with
marker in OOB, 2 BBT with marker in d
 #define STATE_CMD_READ0        0x00000001 /* read data from the beginning
of page */
 #define STATE_CMD_READ1        0x00000002 /* read data from the second half
of page */
 #define STATE_CMD_READSTART    0x00000003 /* read data second command
(large page devices) */
-#define STATE_CMD_PAGEPROG     0x00000004 /* start page programm */
+#define STATE_CMD_PAGEPROG     0x00000004 /* start page program */
 #define STATE_CMD_READOOB      0x00000005 /* read OOB area */
 #define STATE_CMD_ERASE1       0x00000006 /* sector erase first command */
 #define STATE_CMD_STATUS       0x00000007 /* read status */
 #define STATE_CMD_STATUS_M     0x00000008 /* read multi-plane status (isn't
implemented) */
-#define STATE_CMD_SEQIN        0x00000009 /* sequential data imput */
+#define STATE_CMD_SEQIN        0x00000009 /* sequential data input */
 #define STATE_CMD_READID       0x0000000A /* read ID */
 #define STATE_CMD_ERASE2       0x0000000B /* sector erase second command */
 #define STATE_CMD_RESET        0x0000000C /* reset */
@@ -230,7 +230,7 @@ MODULE_PARM_DESC(bbt,         "0 OOB, 1 BBT with marker
in OOB, 2 BBT with marker in d
 #define STATE_ADDR_ZERO        0x00000040 /* one byte zero address was
accepted */
 #define STATE_ADDR_MASK        0x00000070 /* address states mask */

-/* Durind data input/output the simulator is in these states */
+/* During data input/output the simulator is in these states */
 #define STATE_DATAIN           0x00000100 /* waiting for data input */
 #define STATE_DATAIN_MASK      0x00000100 /* data input states mask */

@@ -248,7 +248,7 @@ MODULE_PARM_DESC(bbt,         "0 OOB, 1 BBT with marker
in OOB, 2 BBT with marker in d

 /* Simulator's actions bit masks */
 #define ACTION_CPY       0x00100000 /* copy page/OOB to the internal buffer
*/
-#define ACTION_PRGPAGE   0x00200000 /* programm the internal buffer to
flash */
+#define ACTION_PRGPAGE   0x00200000 /* program the internal buffer to flash
*/
 #define ACTION_SECERASE  0x00300000 /* erase sector */
 #define ACTION_ZEROOFF   0x00400000 /* don't add any offset to address */
 #define ACTION_HALFOFF   0x00500000 /* add to address half of page */
@@ -263,18 +263,18 @@ MODULE_PARM_DESC(bbt,         "0 OOB, 1 BBT with
marker in OOB, 2 BBT with marker in d
 #define OPT_PAGE512      0x00000002 /* 512-byte  page chips */
 #define OPT_PAGE2048     0x00000008 /* 2048-byte page chips */
 #define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
-#define OPT_AUTOINCR     0x00000020 /* page number auto inctimentation is
possible */
+#define OPT_AUTOINCR     0x00000020 /* page number auto incrementation is
possible */
 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus
width */
 #define OPT_PAGE4096     0x00000080 /* 4096-byte page chips */
 #define OPT_LARGEPAGE    (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte
page chips */
 #define OPT_SMALLPAGE    (OPT_PAGE256  | OPT_PAGE512)  /* 256 and 512-byte
page chips */

-/* Remove action bits ftom state */
+/* Remove action bits from state */
 #define NS_STATE(x) ((x) & ~ACTION_MASK)

 /*
  * Maximum previous states which need to be saved. Currently saving is
- * only needed for page programm operation with preceeded read command
+ * only needed for page program operation with preceded read command
  * (which is only valid for 512-byte pages).
  */
 #define NS_MAX_PREVSTATES 1
@@ -380,16 +380,16 @@ static struct nandsim_operations {
     /* Read OOB */
     {OPT_SMALLPAGE, {STATE_CMD_READOOB | ACTION_OOBOFF, STATE_ADDR_PAGE |
ACTION_CPY,
             STATE_DATAOUT, STATE_READY}},
-    /* Programm page starting from the beginning */
+    /* Program page starting from the beginning */
     {OPT_ANY, {STATE_CMD_SEQIN, STATE_ADDR_PAGE, STATE_DATAIN,
             STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
-    /* Programm page starting from the beginning */
+    /* Program page starting from the beginning */
     {OPT_SMALLPAGE, {STATE_CMD_READ0, STATE_CMD_SEQIN | ACTION_ZEROOFF,
STATE_ADDR_PAGE,
                   STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE,
STATE_READY}},
-    /* Programm page starting from the second half */
+    /* Program page starting from the second half */
     {OPT_PAGE512, {STATE_CMD_READ1, STATE_CMD_SEQIN | ACTION_HALFOFF,
STATE_ADDR_PAGE,
                   STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE,
STATE_READY}},
-    /* Programm OOB */
+    /* Program OOB */
     {OPT_SMALLPAGE, {STATE_CMD_READOOB, STATE_CMD_SEQIN | ACTION_OOBOFF,
STATE_ADDR_PAGE,
                   STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE,
STATE_READY}},
     /* Erase sector */
@@ -1171,9 +1171,9 @@ static inline void switch_to_ready_state(struct
nandsim *ns, u_char status)
  * of supported operations.
  *
  * Operation can be unknown because of the following.
- *   1. New command was accepted and this is the firs call to find the
+ *   1. New command was accepted and this is the first call to find the
  *      correspondent states chain. In this case ns->npstates = 0;
- *   2. There is several operations which begin with the same command(s)
+ *   2. There are several operations which begin with the same command(s)
  *      (for example program from the second half and read from the
  *      second half operations both begin with the READ1 command). In this
  *      case the ns->pstates[] array contains previous states.
@@ -1186,7 +1186,7 @@ static inline void switch_to_ready_state(struct
nandsim *ns, u_char status)
  * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
  * zeroed).
  *
- * If there are several maches, the current state is pushed to the
+ * If there are several matches, the current state is pushed to the
  * ns->pstates.
  *
  * The operation can be unknown only while commands are input to the chip.
@@ -1195,10 +1195,10 @@ static inline void switch_to_ready_state(struct
nandsim *ns, u_char status)
  * operation is searched using the following pattern:
  *     ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
  *
- * It is supposed that this pattern must either match one operation on
+ * It is supposed that this pattern must either match one operation or
  * none. There can't be ambiguity in that case.
  *
- * If no matches found, the functions does the following:
+ * If no matches found, the function does the following:
  *   1. if there are saved states present, try to ignore them and search
  *      again only using the last command. If nothing was found, switch
  *      to the STATE_READY state.
@@ -1668,7 +1668,7 @@ static int do_state_action(struct nandsim *ns,
uint32_t action)

     case ACTION_PRGPAGE:
         /*
-         * Programm page - move internal buffer data to the page.
+         * Program page - move internal buffer data to the page.
          */

         if (ns->lines.wp) {
@@ -1933,7 +1933,7 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd)
         NS_DBG("read_byte: all bytes were read\n");

         /*
-         * The OPT_AUTOINCR allows to read next conseqitive pages without
+         * The OPT_AUTOINCR allows to read next consecutive pages without
          * new read operation cycle.
          */
         if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) ==
STATE_DATAOUT) {

[-- Attachment #1.2: Type: text/html, Size: 8374 bytes --]

[-- Attachment #2: spell_fixpatch2 --]
[-- Type: application/octet-stream, Size: 7352 bytes --]

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index a6a73aa..c45e06f 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -210,12 +210,12 @@ MODULE_PARM_DESC(bbt,		 "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in d
 #define STATE_CMD_READ0        0x00000001 /* read data from the beginning of page */
 #define STATE_CMD_READ1        0x00000002 /* read data from the second half of page */
 #define STATE_CMD_READSTART    0x00000003 /* read data second command (large page devices) */
-#define STATE_CMD_PAGEPROG     0x00000004 /* start page programm */
+#define STATE_CMD_PAGEPROG     0x00000004 /* start page program */
 #define STATE_CMD_READOOB      0x00000005 /* read OOB area */
 #define STATE_CMD_ERASE1       0x00000006 /* sector erase first command */
 #define STATE_CMD_STATUS       0x00000007 /* read status */
 #define STATE_CMD_STATUS_M     0x00000008 /* read multi-plane status (isn't implemented) */
-#define STATE_CMD_SEQIN        0x00000009 /* sequential data imput */
+#define STATE_CMD_SEQIN        0x00000009 /* sequential data input */
 #define STATE_CMD_READID       0x0000000A /* read ID */
 #define STATE_CMD_ERASE2       0x0000000B /* sector erase second command */
 #define STATE_CMD_RESET        0x0000000C /* reset */
@@ -230,7 +230,7 @@ MODULE_PARM_DESC(bbt,		 "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in d
 #define STATE_ADDR_ZERO        0x00000040 /* one byte zero address was accepted */
 #define STATE_ADDR_MASK        0x00000070 /* address states mask */
 
-/* Durind data input/output the simulator is in these states */
+/* During data input/output the simulator is in these states */
 #define STATE_DATAIN           0x00000100 /* waiting for data input */
 #define STATE_DATAIN_MASK      0x00000100 /* data input states mask */
 
@@ -248,7 +248,7 @@ MODULE_PARM_DESC(bbt,		 "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in d
 
 /* Simulator's actions bit masks */
 #define ACTION_CPY       0x00100000 /* copy page/OOB to the internal buffer */
-#define ACTION_PRGPAGE   0x00200000 /* programm the internal buffer to flash */
+#define ACTION_PRGPAGE   0x00200000 /* program the internal buffer to flash */
 #define ACTION_SECERASE  0x00300000 /* erase sector */
 #define ACTION_ZEROOFF   0x00400000 /* don't add any offset to address */
 #define ACTION_HALFOFF   0x00500000 /* add to address half of page */
@@ -263,18 +263,18 @@ MODULE_PARM_DESC(bbt,		 "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in d
 #define OPT_PAGE512      0x00000002 /* 512-byte  page chips */
 #define OPT_PAGE2048     0x00000008 /* 2048-byte page chips */
 #define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
-#define OPT_AUTOINCR     0x00000020 /* page number auto inctimentation is possible */
+#define OPT_AUTOINCR     0x00000020 /* page number auto incrementation is possible */
 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
 #define OPT_PAGE4096     0x00000080 /* 4096-byte page chips */
 #define OPT_LARGEPAGE    (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
 #define OPT_SMALLPAGE    (OPT_PAGE256  | OPT_PAGE512)  /* 256 and 512-byte page chips */
 
-/* Remove action bits ftom state */
+/* Remove action bits from state */
 #define NS_STATE(x) ((x) & ~ACTION_MASK)
 
 /*
  * Maximum previous states which need to be saved. Currently saving is
- * only needed for page programm operation with preceeded read command
+ * only needed for page program operation with preceded read command
  * (which is only valid for 512-byte pages).
  */
 #define NS_MAX_PREVSTATES 1
@@ -380,16 +380,16 @@ static struct nandsim_operations {
 	/* Read OOB */
 	{OPT_SMALLPAGE, {STATE_CMD_READOOB | ACTION_OOBOFF, STATE_ADDR_PAGE | ACTION_CPY,
 			STATE_DATAOUT, STATE_READY}},
-	/* Programm page starting from the beginning */
+	/* Program page starting from the beginning */
 	{OPT_ANY, {STATE_CMD_SEQIN, STATE_ADDR_PAGE, STATE_DATAIN,
 			STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
-	/* Programm page starting from the beginning */
+	/* Program page starting from the beginning */
 	{OPT_SMALLPAGE, {STATE_CMD_READ0, STATE_CMD_SEQIN | ACTION_ZEROOFF, STATE_ADDR_PAGE,
 			      STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
-	/* Programm page starting from the second half */
+	/* Program page starting from the second half */
 	{OPT_PAGE512, {STATE_CMD_READ1, STATE_CMD_SEQIN | ACTION_HALFOFF, STATE_ADDR_PAGE,
 			      STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
-	/* Programm OOB */
+	/* Program OOB */
 	{OPT_SMALLPAGE, {STATE_CMD_READOOB, STATE_CMD_SEQIN | ACTION_OOBOFF, STATE_ADDR_PAGE,
 			      STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
 	/* Erase sector */
@@ -1171,9 +1171,9 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
  * of supported operations.
  *
  * Operation can be unknown because of the following.
- *   1. New command was accepted and this is the firs call to find the
+ *   1. New command was accepted and this is the first call to find the
  *      correspondent states chain. In this case ns->npstates = 0;
- *   2. There is several operations which begin with the same command(s)
+ *   2. There are several operations which begin with the same command(s)
  *      (for example program from the second half and read from the
  *      second half operations both begin with the READ1 command). In this
  *      case the ns->pstates[] array contains previous states.
@@ -1186,7 +1186,7 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
  * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
  * zeroed).
  *
- * If there are several maches, the current state is pushed to the
+ * If there are several matches, the current state is pushed to the
  * ns->pstates.
  *
  * The operation can be unknown only while commands are input to the chip.
@@ -1195,10 +1195,10 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
  * operation is searched using the following pattern:
  *     ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
  *
- * It is supposed that this pattern must either match one operation on
+ * It is supposed that this pattern must either match one operation or
  * none. There can't be ambiguity in that case.
  *
- * If no matches found, the functions does the following:
+ * If no matches found, the function does the following:
  *   1. if there are saved states present, try to ignore them and search
  *      again only using the last command. If nothing was found, switch
  *      to the STATE_READY state.
@@ -1668,7 +1668,7 @@ static int do_state_action(struct nandsim *ns, uint32_t action)
 
 	case ACTION_PRGPAGE:
 		/*
-		 * Programm page - move internal buffer data to the page.
+		 * Program page - move internal buffer data to the page.
 		 */
 
 		if (ns->lines.wp) {
@@ -1933,7 +1933,7 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd)
 		NS_DBG("read_byte: all bytes were read\n");
 
 		/*
-		 * The OPT_AUTOINCR allows to read next conseqitive pages without
+		 * The OPT_AUTOINCR allows to read next consecutive pages without
 		 * new read operation cycle.
 		 */
 		if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {

RE: [PATCH] trivial: nandsim.c spell fixes in comments

[Artem Bityutskiy]

On Tue, 2010-11-02 at 16:20 +0530, srimugunthan dhandapani wrote:
> attached patch fixes the program->programm and other  spellfixes in
> comments in nandsim.c
> 
> Signed-off-by: srimugunthan  <srimugunthan.dhandapani@gmail.com>

I've applied this patch to l2-mtd-2.6.git, but please, next time send
patches so that I could just save the e-mail and apply with git-am. In
this case I had to do a lot of work:

1. Try git-am to the body and fail
2. Check that your attachment matches the body
3. Edit your attachement and add author/signoff-by/etc for you.

But thanks for the fixes anyway.

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)

RE: [PATCH] trivial: nandsim.c spell fixes in comments

[Artem Bityutskiy]

On Tue, 2010-11-02 at 16:20 +0530, srimugunthan dhandapani wrote:
> attached patch fixes the program->programm and other  spellfixes in
> comments in nandsim.c
> 
> Signed-off-by: srimugunthan  <srimugunthan.dhandapani@gmail.com>

I've applied this patch to l2-mtd-2.6.git, but please, next time send
patches so that I could just save the e-mail and apply with git-am. In
this case I had to do a lot of work:

1. Try git-am to the body and fail
2. Check that your attachment matches the body
3. Edit your attachement and add author/signoff-by/etc for you.

But thanks for the fixes anyway.

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)