From: halli manjunatha <manjunatha_halli@ti.com>
To: linux-media <linux-media@vger.kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] TI WL 128x FM V4L2 driver
Date: Tue, 25 Jan 2011 11:18:18 +0530 [thread overview]
Message-ID: <AANLkTinAYrGV1k357Bn8trtxafZDoYozG7LDcm3KNBSt@mail.gmail.com> (raw)
Hi Mauro,
Please pull the WL128x FM V4L2 driver from
http://dev.omapzoom.org/pub/scm/manju/L24x-btfm.git fm_v4l2_upstream
This is TI WL128x FM V4L2 driver and it introduces ‘wl128x’ folder
under the ‘drivers/media/radio’. This driver enables support for FM RX
and TX for Texas Instrument's WL128x (also compatible with WL127x)
WiLink chip sets. The V4L2 FM driver can work in either Rx or Tx mode,
and V4L2 interfaces are provided for both.
Texas Instrument's WL128x chip set packs BT, FM, GPS and WLAN in a
single die with BT, FM and GPS being interfaced over a single UART.
This driver works on top of the shared transport line discipline
driver. This driver can also be made use for the WL127x version of the
chip which packs BT, FM and WLAN only.
This driver has been reviewed by various folks within TI and also in
Linux media community. The driver has been tested extensively on TI
platforms and we believe that it is ready for merge into mainline.
The following changes since commit db309d3d54c2f721dd1176ce86c63b0381c0a258:
Mauro Carvalho Chehab (1):
[media] add support for Encore FM3
are available in the git repository at:
http://dev.omapzoom.org/pub/scm/manju/L24x-btfm.git fm_v4l2_upstream
Manjunatha Halli (7):
drivers:media:radio: wl128x: FM Driver common header file
drivers:media:radio: wl128x: FM Driver V4L2 sources
drivers:media:radio: wl128x: FM Driver Common sources
drivers:media:radio: wl128x: FM driver RX sources
drivers:media:radio: wl128x: FM driver TX sources
drivers:media:radio: wl128x: Kconfig & Makefile for wl128x driver
drivers:media:radio: Update Kconfig and Makefile for wl128x FM driver
drivers/media/radio/Kconfig | 3 +
drivers/media/radio/Makefile | 1 +
drivers/media/radio/wl128x/Kconfig | 17 +
drivers/media/radio/wl128x/Makefile | 6 +
drivers/media/radio/wl128x/fmdrv.h | 244 +++++
drivers/media/radio/wl128x/fmdrv_common.c | 1677 +++++++++++++++++++++++++++++
drivers/media/radio/wl128x/fmdrv_common.h | 402 +++++++
drivers/media/radio/wl128x/fmdrv_rx.c | 847 +++++++++++++++
drivers/media/radio/wl128x/fmdrv_rx.h | 59 +
drivers/media/radio/wl128x/fmdrv_tx.c | 425 ++++++++
drivers/media/radio/wl128x/fmdrv_tx.h | 37 +
drivers/media/radio/wl128x/fmdrv_v4l2.c | 580 ++++++++++
drivers/media/radio/wl128x/fmdrv_v4l2.h | 33 +
13 files changed, 4331 insertions(+), 0 deletions(-)
create mode 100644 drivers/media/radio/wl128x/Kconfig
create mode 100644 drivers/media/radio/wl128x/Makefile
create mode 100644 drivers/media/radio/wl128x/fmdrv.h
create mode 100644 drivers/media/radio/wl128x/fmdrv_common.c
create mode 100644 drivers/media/radio/wl128x/fmdrv_common.h
create mode 100644 drivers/media/radio/wl128x/fmdrv_rx.c
create mode 100644 drivers/media/radio/wl128x/fmdrv_rx.h
create mode 100644 drivers/media/radio/wl128x/fmdrv_tx.c
create mode 100644 drivers/media/radio/wl128x/fmdrv_tx.h
create mode 100644 drivers/media/radio/wl128x/fmdrv_v4l2.c
create mode 100644 drivers/media/radio/wl128x/fmdrv_v4l2.h
--
Best Regards
Manjunatha Halli
next reply other threads:[~2011-01-25 5:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-25 5:48 halli manjunatha [this message]
2011-01-25 15:04 ` [GIT PULL] TI WL 128x FM V4L2 driver Mark Brown
2011-01-27 9:32 ` halli manjunatha
2011-01-27 9:54 ` Mark Brown
2011-01-27 11:43 ` Ohad Ben-Cohen
[not found] ` <AANLkTingOYyEs4ZZrcaV0NOhiuGzSpvkATPRFjhFMCmE@mail.gmail.com>
2011-02-14 12:28 ` halli manjunatha
2011-02-27 10:58 ` Mauro Carvalho Chehab
2011-02-28 13:12 ` halli manjunatha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AANLkTinAYrGV1k357Bn8trtxafZDoYozG7LDcm3KNBSt@mail.gmail.com \
--to=manjunatha_halli@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.