* pulseaudio issue @ 2010-09-05 9:10 Frans Meulenbroeks 2010-09-05 12:14 ` Michael 'Mickey' Lauer 2010-09-07 5:57 ` Khem Raj 0 siblings, 2 replies; 5+ messages in thread From: Frans Meulenbroeks @ 2010-09-05 9:10 UTC (permalink / raw) To: openembedded-devel I have an issue with pulseaudio: | CC libpulsecore_0.9.21_la-svolume_arm.lo | pulsecore/svolume_arm.c: In function 'pa_volume_s16ne_arm': | pulsecore/svolume_arm.c:53: error: can't find a register in class 'LO_REGS' while reloading 'asm' | pulsecore/svolume_arm.c:53: error: 'asm' operand has impossible constraints | make[3]: *** [libpulsecore_0.9.21_la-svolume_arm.lo] Error 1 From searching the irc log this is a longer standing issue. Is there any suggested solution for this. If I understand corrrectly it affects all our armv4 and armv5 machines. Frans ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: pulseaudio issue 2010-09-05 9:10 pulseaudio issue Frans Meulenbroeks @ 2010-09-05 12:14 ` Michael 'Mickey' Lauer 2010-09-06 19:53 ` Frans Meulenbroeks 2010-09-07 5:57 ` Khem Raj 1 sibling, 1 reply; 5+ messages in thread From: Michael 'Mickey' Lauer @ 2010-09-05 12:14 UTC (permalink / raw) To: openembedded-devel Am Sonntag, den 05.09.2010, 11:10 +0200 schrieb Frans Meulenbroeks: > I have an issue with pulseaudio: > > | CC libpulsecore_0.9.21_la-svolume_arm.lo > | pulsecore/svolume_arm.c: In function 'pa_volume_s16ne_arm': > | pulsecore/svolume_arm.c:53: error: can't find a register in class > 'LO_REGS' while reloading 'asm' > | pulsecore/svolume_arm.c:53: error: 'asm' operand has impossible constraints > | make[3]: *** [libpulsecore_0.9.21_la-svolume_arm.lo] Error 1 > > From searching the irc log this is a longer standing issue. > Is there any suggested solution for this. > If I understand corrrectly it affects all our armv4 and armv5 machines. Indeed. Pulseaudio has broken armv4 and armv5 support since a couple of versions. We should probably add some COMPATIBLE_ARCH (do we have that?) as a duct tape until someone knowledgable can fix the ARM ASM portions for good. Cheers, :M: ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: pulseaudio issue 2010-09-05 12:14 ` Michael 'Mickey' Lauer @ 2010-09-06 19:53 ` Frans Meulenbroeks 0 siblings, 0 replies; 5+ messages in thread From: Frans Meulenbroeks @ 2010-09-06 19:53 UTC (permalink / raw) To: openembedded-devel 2010/9/5 Michael 'Mickey' Lauer <mickey@vanille-media.de>: > Am Sonntag, den 05.09.2010, 11:10 +0200 schrieb Frans Meulenbroeks: >> I have an issue with pulseaudio: >> >> | CC libpulsecore_0.9.21_la-svolume_arm.lo >> | pulsecore/svolume_arm.c: In function 'pa_volume_s16ne_arm': >> | pulsecore/svolume_arm.c:53: error: can't find a register in class >> 'LO_REGS' while reloading 'asm' >> | pulsecore/svolume_arm.c:53: error: 'asm' operand has impossible constraints >> | make[3]: *** [libpulsecore_0.9.21_la-svolume_arm.lo] Error 1 >> >> From searching the irc log this is a longer standing issue. >> Is there any suggested solution for this. >> If I understand corrrectly it affects all our armv4 and armv5 machines. > > Indeed. Pulseaudio has broken armv4 and armv5 support since a couple of > versions. We should probably add some COMPATIBLE_ARCH (do we have that?) > as a duct tape until someone knowledgable can fix the ARM ASM portions > for good. > We have COMPATIBLE_HOST. Guess that can be used. 0.9.15 builds fine for arm5. Haven't exained the differences in that file yet Frans ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: pulseaudio issue 2010-09-05 9:10 pulseaudio issue Frans Meulenbroeks 2010-09-05 12:14 ` Michael 'Mickey' Lauer @ 2010-09-07 5:57 ` Khem Raj 2010-09-08 17:50 ` Frans Meulenbroeks 1 sibling, 1 reply; 5+ messages in thread From: Khem Raj @ 2010-09-07 5:57 UTC (permalink / raw) To: openembedded-devel On Sun, Sep 5, 2010 at 2:10 AM, Frans Meulenbroeks <fransmeulenbroeks@gmail.com> wrote: > I have an issue with pulseaudio: > > | CC libpulsecore_0.9.21_la-svolume_arm.lo > | pulsecore/svolume_arm.c: In function 'pa_volume_s16ne_arm': > | pulsecore/svolume_arm.c:53: error: can't find a register in class > 'LO_REGS' while reloading 'asm' > | pulsecore/svolume_arm.c:53: error: 'asm' operand has impossible constraints > | make[3]: *** [libpulsecore_0.9.21_la-svolume_arm.lo] Error 1 > > From searching the irc log this is a longer standing issue. > Is there any suggested solution for this. > If I understand corrrectly it affects all our armv4 and armv5 machines. > well its not arm v4 or v5 but its thumb. If you use arm instruction set then it would work. set ARM_INSTRUCTION_SET = "arm" in the recipe and retry. > Frans > > _______________________________________________ > Openembedded-devel mailing list > Openembedded-devel@lists.openembedded.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: pulseaudio issue 2010-09-07 5:57 ` Khem Raj @ 2010-09-08 17:50 ` Frans Meulenbroeks 0 siblings, 0 replies; 5+ messages in thread From: Frans Meulenbroeks @ 2010-09-08 17:50 UTC (permalink / raw) To: openembedded-devel 2010/9/7 Khem Raj <raj.khem@gmail.com>: > On Sun, Sep 5, 2010 at 2:10 AM, Frans Meulenbroeks > <fransmeulenbroeks@gmail.com> wrote: >> I have an issue with pulseaudio: >> >> | CC libpulsecore_0.9.21_la-svolume_arm.lo >> | pulsecore/svolume_arm.c: In function 'pa_volume_s16ne_arm': >> | pulsecore/svolume_arm.c:53: error: can't find a register in class >> 'LO_REGS' while reloading 'asm' >> | pulsecore/svolume_arm.c:53: error: 'asm' operand has impossible constraints >> | make[3]: *** [libpulsecore_0.9.21_la-svolume_arm.lo] Error 1 >> >> From searching the irc log this is a longer standing issue. >> Is there any suggested solution for this. >> If I understand corrrectly it affects all our armv4 and armv5 machines. >> > > well its not arm v4 or v5 but its thumb. If you use arm instruction > set then it would > work. set ARM_INSTRUCTION_SET = "arm" in the recipe and retry. > That seems to have helped a little bit but not enough. Apparently there is armv6 asm or so in it: | CC libpulsecore_0.9.21_la-svolume_arm.lo | {standard input}: Assembler messages: | {standard input}:33: Error: selected processor does not support `ssat r0,#16,r0' | {standard input}:47: Error: selected processor does not support `ssat r2,#16,r2' | {standard input}:48: Error: selected processor does not support `ssat r3,#16,r3' | {standard input}:49: Error: selected processor does not support `pkhbt r0,r3,r2,LSL#16' | {standard input}:65: Error: selected processor does not support `ssat r2,#16,r2' | {standard input}:66: Error: selected processor does not support `ssat r3,#16,r3' | {standard input}:67: Error: selected processor does not support `ssat r4,#16,r4' | {standard input}:68: Error: selected processor does not support `ssat r5,#16,r5' | {standard input}:69: Error: selected processor does not support `pkhbt r0,r3,r2,LSL#16' | {standard input}:70: Error: selected processor does not support `pkhbt r1,r5,r4,LSL#16' | make[3]: *** [libpulsecore_0.9.21_la-svolume_arm.lo] Error 1 see also: http://tinderbox.openembedded.net/public/logs/task/7634513.txt ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-09-08 17:51 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-09-05 9:10 pulseaudio issue Frans Meulenbroeks 2010-09-05 12:14 ` Michael 'Mickey' Lauer 2010-09-06 19:53 ` Frans Meulenbroeks 2010-09-07 5:57 ` Khem Raj 2010-09-08 17:50 ` Frans Meulenbroeks
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.