Pass the gpio value from phospohr-gpio-monitor to other applications

Pass the gpio value from phospohr-gpio-monitor to other applications

[P. Priyatharshan]

[-- Attachment #1: Type: text/plain, Size: 1393 bytes --]

I understand, when the gpio event occurs, phospohr-gpio-monitor starts the target unit and exits.

So whenever gpio event occurs, is there any way to pass the gpio value from phospohr-gpio-monitor to other running applications like x86-power-control.

Thanks,
Priyatharshan P
::DISCLAIMER::
________________________________
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
________________________________

[-- Attachment #2: Type: text/html, Size: 2141 bytes --]

Re: Pass the gpio value from phospohr-gpio-monitor to other applications

[Vijay Khemka]

[-- Attachment #1: Type: text/plain, Size: 1978 bytes --]

It will start systemd unit for a target application and you can define how that target application should behave. Passing a value to another application can be done by using dbus.

From: openbmc <openbmc-bounces+vijaykhemka=fb.com@lists.ozlabs.org> on behalf of "P. Priyatharshan" <PriyatharshanP@hcl.com>
Date: Monday, August 24, 2020 at 7:36 PM
To: "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>
Cc: Brad Bishop <bradleyb@fuzziesquirrel.com>, "Velumani T-ERS, HCLTech" <velumanit@hcl.com>
Subject: Pass the gpio value from phospohr-gpio-monitor to other applications

I understand, when the gpio event occurs, phospohr-gpio-monitor starts the target unit and exits.

So whenever gpio event occurs, is there any way to pass the gpio value from phospohr-gpio-monitor to other running applications like x86-power-control.

Thanks,
Priyatharshan P
::DISCLAIMER::
________________________________
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
________________________________

[-- Attachment #2: Type: text/html, Size: 5263 bytes --]

Pass the gpio value from phospohr-gpio-monitor to other applications

[Velumani T-ERS,HCLTech]

[-- Attachment #1: Type: text/plain, Size: 1395 bytes --]

Hi Team,

I understand, when the gpio event occurs, phospohr-gpio-monitor starts the target unit and exits.

So whenever gpio event occurs, is there any way to pass the gpio value from phospohr-gpio-monitor to other running applications like x86-power-control.

Regards,
Velu
::DISCLAIMER::
________________________________
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
________________________________

[-- Attachment #2: Type: text/html, Size: 3799 bytes --]