* [PATCHv2 0/5] misc meta-intel commits
@ 2012-10-10 1:16 nitin.a.kamble
2012-10-10 1:16 ` [PATCHv2 1/5] xf86-video-intel: Bring 2.20.0 version to match released graphics stack nitin.a.kamble
` (4 more replies)
0 siblings, 5 replies; 19+ messages in thread
From: nitin.a.kamble @ 2012-10-10 1:16 UTC (permalink / raw)
To: tom.zanussi, darren.hart, yocto
From: Nitin A Kamble <nitin.a.kamble@intel.com>
This is v2 of the commits, updated after feedback from mailing list.
This has been tested on crownbay and sugarbay BSPs to work as expected.
Thanks,
Nitin
The following changes since commit 2bd31135bdcdda19dabdf69706d9a38d5872e1fe:
crownbay: uprev v3.4 kernel commit ids (2012-10-08 16:09:33 -0500)
are available in the git repository at:
git://git.yoctoproject.org/meta-intel-contrib nitin/misc
http://git.yoctoproject.org/cgit.cgi/meta-intel-contrib/log/?h=nitin/misc
Nitin A Kamble (5):
xf86-video-intel: Bring 2.20.0 version to match released graphics
stack
crownbay.conf: specify the 8.0.4 version as preferred version of
mesa-dri
emgd-driver_bin_1.10: Remove in favor of 1.14
fishriver BSP retirement
update maintainers of various BSPs
MAINTAINERS | 16 +--
.../xorg-driver/emgd-driver-bin_1.10.bb | 93 ----------------
.../xorg-driver/xf86-video-intel_2.20.0.bb | 27 +++++
.../xorg-driver/xorg-driver-common.inc | 33 ++++++
.../xorg-driver/xorg-driver-video.inc | 4 +
meta-chiefriver/README | 11 ++
meta-crownbay/README | 2 +-
meta-crownbay/conf/machine/crownbay.conf | 2 +-
meta-emenlow/README | 2 +-
meta-fishriver/COPYING.MIT | 17 ---
meta-fishriver/README | 114 --------------------
meta-fishriver/README.sources | 17 ---
meta-fishriver/conf/layer.conf | 12 --
meta-fishriver/conf/machine/fishriver.conf | 17 ---
.../formfactor/formfactor/fishriver/machconfig | 3 -
.../recipes-bsp/formfactor/formfactor_0.0.bbappend | 3 -
.../xserver-xf86-config/fishriver/xorg.conf | 26 -----
.../xorg-xserver/xserver-xf86-config_0.1.bbappend | 1 -
.../linux/linux-yocto-rt_3.0.bbappend | 8 --
.../linux/linux-yocto-rt_3.2.bbappend | 8 --
.../recipes-kernel/linux/linux-yocto_3.0.bbappend | 9 --
.../recipes-kernel/linux/linux-yocto_3.2.bbappend | 8 --
.../recipes-kernel/linux/linux-yocto_3.4.bbappend | 8 --
meta-jasperforest/README | 2 +-
meta-sugarbay/README | 2 +-
25 files changed, 86 insertions(+), 359 deletions(-)
delete mode 100644 common/recipes-graphics/xorg-driver/emgd-driver-bin_1.10.bb
create mode 100644 common/recipes-graphics/xorg-driver/xf86-video-intel_2.20.0.bb
create mode 100644 common/recipes-graphics/xorg-driver/xorg-driver-common.inc
create mode 100644 common/recipes-graphics/xorg-driver/xorg-driver-video.inc
delete mode 100644 meta-fishriver/COPYING.MIT
delete mode 100644 meta-fishriver/README
delete mode 100644 meta-fishriver/README.sources
delete mode 100644 meta-fishriver/binary/.gitignore
delete mode 100644 meta-fishriver/conf/layer.conf
delete mode 100644 meta-fishriver/conf/machine/fishriver.conf
delete mode 100644 meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfig
delete mode 100644 meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
delete mode 100644 meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fishriver/xorg.conf
delete mode 100644 meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
--
1.7.3.4
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCHv2 1/5] xf86-video-intel: Bring 2.20.0 version to match released graphics stack
2012-10-10 1:16 [PATCHv2 0/5] misc meta-intel commits nitin.a.kamble
@ 2012-10-10 1:16 ` nitin.a.kamble
2012-10-10 2:43 ` Darren Hart
2012-10-10 1:16 ` [PATCHv2 2/5] crownbay.conf: specify the 8.0.4 version as preferred version of mesa-dri nitin.a.kamble
` (3 subsequent siblings)
4 siblings, 1 reply; 19+ messages in thread
From: nitin.a.kamble @ 2012-10-10 1:16 UTC (permalink / raw)
To: tom.zanussi, darren.hart, yocto
From: Nitin A Kamble <nitin.a.kamble@intel.com>
The Intel Linux graphics stack version 12.07 released on 2012-07-24
requires version 2.20.0 as seen here:
http://intellinuxgraphics.org/2012.07.html
Currently oecore has 2.19.0 version. So get this 2.20.0 version in
meta-intel layer to be used by sugarbay and other BSPs using the
Intel graphics stack.
Also took changes from version 2.20.8 recipe from Ross Burton's branch.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
---
.../xorg-driver/xf86-video-intel_2.20.0.bb | 27 ++++++++++++++++
.../xorg-driver/xorg-driver-common.inc | 33 ++++++++++++++++++++
.../xorg-driver/xorg-driver-video.inc | 4 ++
3 files changed, 64 insertions(+), 0 deletions(-)
create mode 100644 common/recipes-graphics/xorg-driver/xf86-video-intel_2.20.0.bb
create mode 100644 common/recipes-graphics/xorg-driver/xorg-driver-common.inc
create mode 100644 common/recipes-graphics/xorg-driver/xorg-driver-video.inc
diff --git a/common/recipes-graphics/xorg-driver/xf86-video-intel_2.20.0.bb b/common/recipes-graphics/xorg-driver/xf86-video-intel_2.20.0.bb
new file mode 100644
index 0000000..6cfca03
--- /dev/null
+++ b/common/recipes-graphics/xorg-driver/xf86-video-intel_2.20.0.bb
@@ -0,0 +1,27 @@
+require xorg-driver-video.inc
+
+SUMMARY = "X.Org X server -- Intel integrated graphics chipsets driver"
+
+DESCRIPTION = "intel is an Xorg driver for Intel integrated graphics \
+chipsets. The driver supports depths 8, 15, 16 and 24. On some chipsets, \
+the driver supports hardware accelerated 3D via the Direct Rendering \
+Infrastructure (DRI)."
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=8730ad58d11c7bbad9a7066d69f7808e"
+
+PR = "${INC_PR}.0"
+
+DEPENDS += "virtual/libx11 drm xf86driproto glproto \
+ virtual/libgl xineramaproto xf86driproto libpciaccess"
+
+PACKAGECONFIG ??= ""
+PACKAGECONFIG[sna] = "--enable-sna,--disable-sna"
+PACKAGECONFIG[xvmc] = "--enable-xvmc,--disable-xvmc,libxvmc"
+
+# --enable-kms-only option is required by ROOTLESS_X
+EXTRA_OECONF += '${@base_conditional( "ROOTLESS_X", "1", " --enable-kms-only", "", d )}'
+
+COMPATIBLE_HOST = '(i.86|x86_64).*-linux'
+
+SRC_URI[md5sum] = "070bb866b05a16366bd9bb844c9b91aa"
+SRC_URI[sha256sum] = "21949297220ceda32bba430f778c6409002079dc717c7190dbd1062ab4a56783"
diff --git a/common/recipes-graphics/xorg-driver/xorg-driver-common.inc b/common/recipes-graphics/xorg-driver/xorg-driver-common.inc
new file mode 100644
index 0000000..1ed2742
--- /dev/null
+++ b/common/recipes-graphics/xorg-driver/xorg-driver-common.inc
@@ -0,0 +1,33 @@
+DESCRIPTION = "X driver"
+HOMEPAGE = "http://www.x.org"
+BUGTRACKER = "https://bugs.freedesktop.org"
+SECTION = "x11/drivers"
+LICENSE = "MIT-X"
+
+PE = "2"
+INC_PR = "r0"
+
+DEPENDS = "virtual/xserver xproto randrproto util-macros"
+
+SRC_URI = "${XORG_MIRROR}/individual/driver/${BPN}-${PV}.tar.bz2"
+
+S = "${WORKDIR}/${BPN}-${PV}"
+
+FILES_${PN} += " ${libdir}/xorg/modules/drivers/*.so"
+FILES_${PN}-dbg += " ${libdir}/xorg/modules/drivers/.debug"
+
+inherit autotools pkgconfig
+
+# AC_CHECK_FILE doesn't work when cross compiling, so we create a replacement
+# macro that simply assumes the test succeeds.
+do_configure_prepend () {
+ echo 'AC_DEFUN(CC_AC_CHECK_FILE, $2)' > configure.ac.new
+ sed 's/AC_CHECK_FILE/CC_AC_CHECK_FILE/g' configure.ac >> configure.ac.new
+ mv configure.ac.new configure.ac
+}
+
+# FIXME: We don't want to include the libtool archives (*.la) from modules
+# directory, as they serve no useful purpose. Upstream should fix Makefile.am
+do_install_append() {
+ find ${D}${libdir}/xorg/modules -regex ".*\.la$" | xargs rm -f --
+}
diff --git a/common/recipes-graphics/xorg-driver/xorg-driver-video.inc b/common/recipes-graphics/xorg-driver/xorg-driver-video.inc
new file mode 100644
index 0000000..57c80d1
--- /dev/null
+++ b/common/recipes-graphics/xorg-driver/xorg-driver-video.inc
@@ -0,0 +1,4 @@
+include xorg-driver-common.inc
+
+DEPENDS =+ "renderproto videoproto xextproto fontsproto"
+
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCHv2 2/5] crownbay.conf: specify the 8.0.4 version as preferred version of mesa-dri
2012-10-10 1:16 [PATCHv2 0/5] misc meta-intel commits nitin.a.kamble
2012-10-10 1:16 ` [PATCHv2 1/5] xf86-video-intel: Bring 2.20.0 version to match released graphics stack nitin.a.kamble
@ 2012-10-10 1:16 ` nitin.a.kamble
2012-10-10 2:45 ` Darren Hart
2012-10-10 9:25 ` Burton, Ross
2012-10-10 1:16 ` [PATCHv2 3/5] emgd-driver_bin_1.10: Remove in favor of 1.14 nitin.a.kamble
` (2 subsequent siblings)
4 siblings, 2 replies; 19+ messages in thread
From: nitin.a.kamble @ 2012-10-10 1:16 UTC (permalink / raw)
To: tom.zanussi, darren.hart, yocto
From: Nitin A Kamble <nitin.a.kamble@intel.com>
Avoid following warnings while building crownbay BSPs:
NOTE: preferred version 7.11 of mesa-dri not available (for item virtual/libgl)
NOTE: versions of mesa-dri available: 2:8.0.4 2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
This commit addresses one of the issue reported on the bug:
[YOCTO #3238]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
---
meta-crownbay/conf/machine/crownbay.conf | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/meta-crownbay/conf/machine/crownbay.conf b/meta-crownbay/conf/machine/crownbay.conf
index c18fa1d..72431de 100644
--- a/meta-crownbay/conf/machine/crownbay.conf
+++ b/meta-crownbay/conf/machine/crownbay.conf
@@ -18,7 +18,7 @@ XSERVER ?= "${XSERVER_IA32_BASE} \
"
PREFERRED_VERSION_xserver-xorg ?= "1.9.3"
-PREFERRED_VERSION_mesa-dri ?= "7.11"
+PREFERRED_VERSION_mesa-dri ?= "8.0.4"
PREFERRED_VERSION_xf86-input-evdev ?= "2.6.0"
APPEND += "video=vesafb vga=0x318 vmalloc=256MB"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCHv2 3/5] emgd-driver_bin_1.10: Remove in favor of 1.14
2012-10-10 1:16 [PATCHv2 0/5] misc meta-intel commits nitin.a.kamble
2012-10-10 1:16 ` [PATCHv2 1/5] xf86-video-intel: Bring 2.20.0 version to match released graphics stack nitin.a.kamble
2012-10-10 1:16 ` [PATCHv2 2/5] crownbay.conf: specify the 8.0.4 version as preferred version of mesa-dri nitin.a.kamble
@ 2012-10-10 1:16 ` nitin.a.kamble
2012-10-10 2:45 ` Darren Hart
2012-10-10 1:16 ` [PATCHv2 4/5] fishriver BSP retirement nitin.a.kamble
2012-10-10 1:16 ` [PATCHv2 5/5] update maintainers of various BSPs nitin.a.kamble
4 siblings, 1 reply; 19+ messages in thread
From: nitin.a.kamble @ 2012-10-10 1:16 UTC (permalink / raw)
To: tom.zanussi, darren.hart, yocto
From: Nitin A Kamble <nitin.a.kamble@intel.com>
All BSPs have been migrated to 1.14, we can now safely retire 1.10
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
---
.../xorg-driver/emgd-driver-bin_1.10.bb | 93 --------------------
1 files changed, 0 insertions(+), 93 deletions(-)
delete mode 100644 common/recipes-graphics/xorg-driver/emgd-driver-bin_1.10.bb
diff --git a/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.10.bb b/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.10.bb
deleted file mode 100644
index 6d80bee..0000000
--- a/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.10.bb
+++ /dev/null
@@ -1,93 +0,0 @@
-SUMMARY = "EMGD 1.10 xserver binaries"
-DESCRIPTION = "EMGD 1.10 includes some userspace binaries that use non-free \
-licensing, which are now available via a non-click-through downloadable \
-tarball, and is what this recipe now uses. Since it is a non-free license, \
-this recipe is marked as 'License_emgd-driver-bin_1.10' and you need to add \
-to LICENSE_FLAGS_WHITELIST += \"License_emgd-driver-bin_1.10\" to your \
-local.conf in order to enable it in a build."
-LICENSE = "Intel-binary-only"
-LICENSE_FLAGS = "license_${PN}_${PV}"
-PR = "r1"
-
-EMGD_LIC_DIR = "IEMGD_HEAD_Linux/License"
-EMGD_RPM_DIR = "IEMGD_HEAD_Linux/MeeGo1.2"
-EMGD_VIDEO_PLUGIN_DIR = "../common/video_plugin"
-
-LIC_FILES_CHKSUM = "file://${WORKDIR}/${EMGD_LIC_DIR}/License.txt;md5=b54f01caaf8483b3cb60c0c40f2bf22d"
-
-DEPENDS = "rpm-native xz-native"
-
-SRC_URI = "https://edc.intel.com/App_Shared/Downloads/LIN_EMGD_1_10_RC_2209.tgz"
-
-SRC_URI[md5sum] = "e4a38d9efa0b086ae21b68145c4db4e9"
-SRC_URI[sha256sum] = "acea5f0f93a31553553428623c007d7ed0c604cf715fd87dfe075751da4be548"
-
-# These are closed binaries generated elsewhere so don't check ldflags
-INSANE_SKIP_${PN} = "ldflags"
-# Inhibit warnings about files being stripped, we can't do anything about it.
-INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
-
-FILES_${PN} += "${libdir}/dri ${libdir}/gstreamer-0.10 ${libdir}/xorg/modules/drivers"
-FILES_${PN}-dbg += "${libdir}/xorg/modules/drivers/.debug ${libdir}/dri/.debug"
-
-S = "${WORKDIR}/${EMGD_RPM_DIR}"
-
-do_install () {
- # A gstreamer VA buffer library
- rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/gst-vabuffer*.rpm | cpio -id
-
- # MIX Common contains common classes, datatype, header files used by other MIX components
- rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/mixcommon*.rpm | cpio -id
-
- # MIX Video Bitstream Parser is an user library interface for various video format bitstream parsing
- rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/mixvbp*.rpm | cpio -id
-
- # MIX Video is an user library interface for various video codecs available on the platform.
- rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/mixvideo*.rpm | cpio -id
-
- install -d -m 0755 ${D}${libdir}/gstreamer-0.10
- install -m 0755 ${S}/usr/lib/* ${D}${libdir}/
-
- # A gstreamer plugin that uses MIX Video for hardware accelerated video decoding and rendering.
- rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/gst-plugins-mixvideo*.rpm | cpio -id
-
- # A collection of gstreamer plugins that uses VA libraries for hardware accelerated video rendering and text overlay.
- rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/gst-plugins-va*.rpm | cpio -id
-
- install -m 0755 ${S}/usr/lib/gstreamer-0.10/* ${D}${libdir}/gstreamer-0.10/
-
- # EMGD runtime graphics libraries
- rpm2cpio ${S}/emgd-bin*.rpm | xz -d | cpio -id
-
- install -d -m 0755 ${D}${libdir}/dri
- install -d -m 0755 ${D}${libdir}/xorg/modules/drivers
- install -d -m 0755 ${D}${sysconfdir}
- install -d -m 0755 ${D}${mandir}/man4
- install -m 0755 ${S}/usr/lib/*.so.* ${D}${libdir}/
- install -m 0755 ${S}/usr/lib/dri/* ${D}${libdir}/dri/
- install -m 0755 ${S}/usr/lib/xorg/modules/drivers/* ${D}${libdir}/xorg/modules/drivers/
- install -m 0755 ${S}/etc/* ${D}${sysconfdir}/
- install -m 0755 ${S}/usr/share/man/man4/* ${D}${mandir}/man4/
-
- # Khronos development headers needed for EGL, OpenGL-ES, and OpenVG development
- rpm2cpio ${S}/emgd-devel*.rpm | xz -d | cpio -id
-
- install -d -m 0755 ${D}${includedir}/EGL
- install -m 0755 ${S}/usr/include/EGL/*.h ${D}${includedir}/EGL/
- install -d -m 0755 ${D}${includedir}/GLES
- install -m 0755 ${S}/usr/include/GLES/*.h ${D}${includedir}/GLES/
- install -d -m 0755 ${D}${includedir}/GLES2
- install -m 0755 ${S}/usr/include/GLES2/*.h ${D}${includedir}/GLES2/
- install -d -m 0755 ${D}${includedir}/KHR
- install -m 0755 ${S}/usr/include/KHR/*.h ${D}${includedir}/KHR/
- install -d -m 0755 ${D}${includedir}/VG
- install -m 0755 ${S}/usr/include/VG/*.h ${D}${includedir}/VG/
-
- ln -sf libEGL.so.1 ${D}${libdir}/libEGL.so
- ln -sf libGLES_CM.so.1 ${D}${libdir}/libGLES_CM.so
- ln -sf libGLESv2.so.2 ${D}${libdir}/libGLESv2.so
- ln -sf libOpenVG.so.1 ${D}${libdir}/libOpenVG.so
- ln -sf libOpenVGU.so.1 ${D}${libdir}/libOpenVGU.so
-}
-
-LEAD_SONAME = "libEGL.so"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCHv2 4/5] fishriver BSP retirement
2012-10-10 1:16 [PATCHv2 0/5] misc meta-intel commits nitin.a.kamble
` (2 preceding siblings ...)
2012-10-10 1:16 ` [PATCHv2 3/5] emgd-driver_bin_1.10: Remove in favor of 1.14 nitin.a.kamble
@ 2012-10-10 1:16 ` nitin.a.kamble
2012-10-10 2:42 ` Darren Hart
2012-10-10 21:06 ` Bruce Ashfield
2012-10-10 1:16 ` [PATCHv2 5/5] update maintainers of various BSPs nitin.a.kamble
4 siblings, 2 replies; 19+ messages in thread
From: nitin.a.kamble @ 2012-10-10 1:16 UTC (permalink / raw)
To: tom.zanussi, darren.hart, yocto
From: Nitin A Kamble <nitin.a.kamble@intel.com>
This commit removes fishriver bsp from meta-intel layer.
Fish-River-Islnad-2 hardware and BSP has made this
Fish-River-Island hardware and BSP absolute.
Also we discussed this on the Yocto Execution Tracking Meeting,
and to our knowledge no customer is using (cares about) this BSP now.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
---
MAINTAINERS | 4 -
meta-fishriver/COPYING.MIT | 17 ---
meta-fishriver/README | 114 --------------------
meta-fishriver/README.sources | 17 ---
meta-fishriver/conf/layer.conf | 12 --
meta-fishriver/conf/machine/fishriver.conf | 17 ---
.../formfactor/formfactor/fishriver/machconfig | 3 -
.../recipes-bsp/formfactor/formfactor_0.0.bbappend | 3 -
.../xserver-xf86-config/fishriver/xorg.conf | 26 -----
.../xorg-xserver/xserver-xf86-config_0.1.bbappend | 1 -
.../linux/linux-yocto-rt_3.0.bbappend | 8 --
.../linux/linux-yocto-rt_3.2.bbappend | 8 --
.../recipes-kernel/linux/linux-yocto_3.0.bbappend | 9 --
.../recipes-kernel/linux/linux-yocto_3.2.bbappend | 8 --
.../recipes-kernel/linux/linux-yocto_3.4.bbappend | 8 --
15 files changed, 0 insertions(+), 255 deletions(-)
delete mode 100644 meta-fishriver/COPYING.MIT
delete mode 100644 meta-fishriver/README
delete mode 100644 meta-fishriver/README.sources
delete mode 100644 meta-fishriver/binary/.gitignore
delete mode 100644 meta-fishriver/conf/layer.conf
delete mode 100644 meta-fishriver/conf/machine/fishriver.conf
delete mode 100644 meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfig
delete mode 100644 meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
delete mode 100644 meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fishriver/xorg.conf
delete mode 100644 meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
diff --git a/MAINTAINERS b/MAINTAINERS
index 5bcf470..3bf0add 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -56,10 +56,6 @@ EMENLOW
M: Tom Zanussi <tom.zanussi@intel.com>
F: meta-emenlow/
-FISHRIVER
-M: Tom Zanussi <tom.zanussi@intel.com>
-F: meta-fishriver/
-
FRI2
M: Darren Hart <dvhart@linux.intel.com>
F: meta-fri2/
diff --git a/meta-fishriver/COPYING.MIT b/meta-fishriver/COPYING.MIT
deleted file mode 100644
index fb950dc..0000000
--- a/meta-fishriver/COPYING.MIT
+++ /dev/null
@@ -1,17 +0,0 @@
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.
diff --git a/meta-fishriver/README b/meta-fishriver/README
deleted file mode 100644
index 1dd0a4c..0000000
--- a/meta-fishriver/README
+++ /dev/null
@@ -1,114 +0,0 @@
-This README file contains information on building the meta-fishriver
-BSP layer, and booting the images contained in the /binary directory.
-Please see the corresponding sections below for details.
-
-
-Dependencies
-============
-
-This layer depends on:
-
- URI: git://git.openembedded.org/bitbake
- branch: master
-
- URI: git://git.openembedded.org/openembedded-core
- layers: meta
- branch: master
-
- URI: git://git.yoctoproject.org/meta-intel
- layers: intel
- branch: master
-
-
-Patches
-=======
-
-Please submit any patches against this BSP to the Yocto mailing list
-(yocto@yoctoproject.org) and cc: the maintainer:
-
-Maintainer: Tom Zanussi <tom.zanussi@intel.com>
-
-Please see the meta-intel/MAINTAINERS file for more details.
-
-
-Table of Contents
-=================
-
- I. Building the meta-fishriver BSP layer
- II. Booting the images in /binary
-
-
-I. Building the meta-fishriver BSP layer
-========================================
-
-In order to build an image with BSP support for a given release, you
-need to download the corresponding BSP tarball from the 'Board Support
-Package (BSP) Downloads' page of the Yocto Project website.
-
-Having done that, and assuming you extracted the BSP tarball contents
-at the top-level of your yocto build tree, you can build a fishriver
-image by adding the location of the meta-fishriver layer to
-bblayers.conf, along with the meta-intel layer itself (to access
-common metadata shared between BSPs) e.g.:
-
- yocto/meta-intel \
- yocto/meta-intel/meta-fishriver \
-
-To enable the fishriver layer, add the fishriver MACHINE to local.conf:
-
- MACHINE ?= "fishriver"
-
-You should then be able to build a fishriver image as such:
-
- $ source oe-init-build-env
- $ bitbake core-image-sato
-
-At the end of a successful build, you should have a live image that
-you can boot from a USB flash drive (see instructions on how to do
-that below, in the section 'Booting the images from /binary').
-
-As an alternative to downloading the BSP tarball, you can also work
-directly from the meta-intel git repository. For each BSP in the
-'meta-intel' repository, there are multiple branches, one
-corresponding to each major release starting with 'laverne' (0.90), in
-addition to the latest code which tracks the current master (note that
-not all BSPs are present in every release). Instead of extracting a
-BSP tarball at the top level of your yocto build tree, you can
-equivalently check out the appropriate branch from the meta-intel
-repository at the same location.
-
-
-II. Booting the images in /binary
-=================================
-
-This BSP contains bootable live images, which can be used to directly
-boot Yocto off of a USB flash drive.
-
-Under Linux, insert a USB flash drive. Assuming the USB flash drive
-takes device /dev/sdf, use dd to copy the live image to it. For
-example:
-
-# dd if=core-image-sato-fishriver-20101207053738.hddimg of=/dev/sdf
-# sync
-# eject /dev/sdf
-
-This should give you a bootable USB flash device. Insert the device
-into a bootable USB socket on the target, and power on. This should
-result in a system booted to the Sato graphical desktop.
-
-If you want a terminal, use the arrows at the top of the UI to move to
-different pages of available applications, one of which is named
-'Terminal'. Clicking that should give you a root terminal.
-
-If you want to ssh into the system, you can use the root terminal to
-ifconfig the IP address and use that to ssh in. The root password is
-empty, so to log in type 'root' for the user name and hit 'Enter' at
-the Password prompt: and you should be in.
-
-----
-
-If you find you're getting corrupt images on the USB (it doesn't show
-the syslinux boot: prompt, or the boot: prompt contains strange
-characters), try doing this first:
-
-# dd if=/dev/zero of=/dev/sdf bs=1M count=512
diff --git a/meta-fishriver/README.sources b/meta-fishriver/README.sources
deleted file mode 100644
index 76180f1..0000000
--- a/meta-fishriver/README.sources
+++ /dev/null
@@ -1,17 +0,0 @@
-The sources for the packages comprising the images shipped with this
-BSP can be found at the following location:
-
-http://downloads.yoctoproject.org/mirror/sources/
-
-The metadata used to generate the images shipped with this BSP, in
-addition to the code contained in this BSP, can be found at the
-following location:
-
-http://www.yoctoproject.org/downloads/yocto-1.2/poky-denzil-7.0.tar.bz2
-
-The metadata used to generate the images shipped with this BSP, in
-addition to the code contained in this BSP, can also be found at the
-following locations:
-
-git://git.yoctoproject.org/poky.git
-git://git.yoctoproject.org/meta-intel
diff --git a/meta-fishriver/binary/.gitignore b/meta-fishriver/binary/.gitignore
deleted file mode 100644
index e69de29..0000000
diff --git a/meta-fishriver/conf/layer.conf b/meta-fishriver/conf/layer.conf
deleted file mode 100644
index 61e292b..0000000
--- a/meta-fishriver/conf/layer.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-# We have a conf and classes directory, add to BBPATH
-BBPATH := "${BBPATH}:${LAYERDIR}"
-
-# We have a recipes directory, add to BBFILES
-BBFILES := "${BBFILES} ${LAYERDIR}/recipes-*/*/*.bb \
- ${LAYERDIR}/recipes-*/*/*.bbappend"
-
-BBFILE_COLLECTIONS += "fishriver"
-BBFILE_PATTERN_fishriver := "^${LAYERDIR}/"
-BBFILE_PRIORITY_fishriver = "6"
-
-LAYERDEPENDS_fishriver = "intel"
diff --git a/meta-fishriver/conf/machine/fishriver.conf b/meta-fishriver/conf/machine/fishriver.conf
deleted file mode 100644
index ec2e87f..0000000
--- a/meta-fishriver/conf/machine/fishriver.conf
+++ /dev/null
@@ -1,17 +0,0 @@
-#@TYPE: Machine
-#@NAME: fishriver
-
-#@DESCRIPTION: Machine configuration for Fish River Island systems
-# i.e. Z530/E660 + EG20T
-
-PREFERRED_VERSION_linux-yocto ?= "3.4%"
-
-require conf/machine/include/tune-atom.inc
-require conf/machine/include/ia32-base.inc
-
-XSERVER ?= "${XSERVER_IA32_BASE} \
- ${XSERVER_IA32_EXT} \
- ${XSERVER_IA32_VESA} \
- "
-
-APPEND += "video=vesafb vga=0x318"
diff --git a/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfig b/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfig
deleted file mode 100644
index ffce012..0000000
--- a/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-# Assume a USB mouse and keyboard are connected
-HAVE_TOUCHSCREEN=0
-HAVE_KEYBOARD=1
diff --git a/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend b/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
deleted file mode 100644
index 54da0ff..0000000
--- a/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
+++ /dev/null
@@ -1,3 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-PRINC = "1"
diff --git a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fishriver/xorg.conf b/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fishriver/xorg.conf
deleted file mode 100644
index da4fc3c..0000000
--- a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fishriver/xorg.conf
+++ /dev/null
@@ -1,26 +0,0 @@
-Section "Device"
- Identifier "Generic VESA"
- Driver "vesa"
-EndSection
-
-Section "Monitor"
- Identifier "Generic Monitor"
- Option "DPMS"
-EndSection
-
-Section "Screen"
- Identifier "Default Screen"
- Device "Generic VESA"
- Monitor "Generic Monitor"
- DefaultDepth 24
-EndSection
-
-Section "ServerLayout"
- Identifier "Default Layout"
- Screen "Default Screen"
-EndSection
-
-Section "ServerFlags"
- Option "DontZap" "0"
- Option "AutoAddDevices" "False"
-EndSection
diff --git a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend b/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
deleted file mode 100644
index 72d991c..0000000
--- a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
+++ /dev/null
@@ -1 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
diff --git a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend b/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
deleted file mode 100644
index 7a502bd..0000000
--- a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
+++ /dev/null
@@ -1,8 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-COMPATIBLE_MACHINE_fishriver = "fishriver"
-KMACHINE_fishriver = "fishriver"
-
-# Update the following to use a different BSP branch or meta SRCREV
-#KBRANCH_fishriver = "yocto/standard/preempt-rt/base"
-#SRCREV_machine_pn-linux-yocto-rt_fishriver ?= XXXX
-#SRCREV_meta_pn-linux-yocto-rt_fishriver ?= XXXX
diff --git a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend b/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
deleted file mode 100644
index a91a425..0000000
--- a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
+++ /dev/null
@@ -1,8 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-COMPATIBLE_MACHINE_fishriver = "fishriver"
-KMACHINE_fishriver = "fishriver"
-
-# Update the following to use a different BSP branch or meta SRCREV
-#KBRANCH_fishriver = "standard/preempt-rt/base"
-#SRCREV_machine_pn-linux-yocto-rt_fishriver ?= XXXX
-#SRCREV_meta_pn-linux-yocto-rt_fishriver ?= XXXX
diff --git a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
deleted file mode 100644
index 6ac6ef5..0000000
--- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
+++ /dev/null
@@ -1,9 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-COMPATIBLE_MACHINE_fishriver = "fishriver"
-KMACHINE_fishriver = "fishriver"
-KBRANCH_fishriver = "yocto/standard/fishriver"
-KERNEL_FEATURES_append_fishriver += " cfg/smp.scc"
-
-SRCREV_machine_pn-linux-yocto_fishriver ?= "c139592c96722727a9f074515a4061c3820da1a6"
-SRCREV_meta_pn-linux-yocto_fishriver ?= "59314a3523e360796419d76d78c6f7d8c5ef2593"
diff --git a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
deleted file mode 100644
index 9a2f678..0000000
--- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
+++ /dev/null
@@ -1,8 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-COMPATIBLE_MACHINE_fishriver = "fishriver"
-KMACHINE_fishriver = "fishriver"
-KBRANCH_fishriver = "standard/default/fishriver"
-
-SRCREV_machine_pn-linux-yocto_fishriver ?= "969edd015a46eed77d6c3daeffdc299dd06e3397"
-SRCREV_meta_pn-linux-yocto_fishriver ?= "5b4c9dc78b5ae607173cc3ddab9bce1b5f78129b"
diff --git a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
deleted file mode 100644
index c0d04dc..0000000
--- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
+++ /dev/null
@@ -1,8 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-COMPATIBLE_MACHINE_fishriver = "fishriver"
-KMACHINE_fishriver = "fishriver"
-KBRANCH_fishriver = "standard/fishriver"
-
-SRCREV_machine_pn-linux-yocto_fishriver ?= "3fa06aa29078fdb2af431de2d3fdae7d281ba85f"
-SRCREV_meta_pn-linux-yocto_fishriver ?= "5bdc655034a58a7147176a8a882d81e2fd51e4b9"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCHv2 5/5] update maintainers of various BSPs
2012-10-10 1:16 [PATCHv2 0/5] misc meta-intel commits nitin.a.kamble
` (3 preceding siblings ...)
2012-10-10 1:16 ` [PATCHv2 4/5] fishriver BSP retirement nitin.a.kamble
@ 2012-10-10 1:16 ` nitin.a.kamble
4 siblings, 0 replies; 19+ messages in thread
From: nitin.a.kamble @ 2012-10-10 1:16 UTC (permalink / raw)
To: tom.zanussi, darren.hart, yocto
From: Nitin A Kamble <nitin.a.kamble@intel.com>
BSP maintainership for following BSPs is now transitioned from Tom to Nitin
sugarbay, emenlow, crownbay, jasperforest, chiefriver
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
---
MAINTAINERS | 12 ++++++------
meta-chiefriver/README | 11 +++++++++++
meta-crownbay/README | 2 +-
meta-emenlow/README | 2 +-
meta-jasperforest/README | 2 +-
meta-sugarbay/README | 2 +-
6 files changed, 21 insertions(+), 10 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3bf0add..d63ed31 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -37,15 +37,15 @@ M: Kishore Bodke <kishore.k.bodke@intel.com>
F: meta-cedartrail/
CHIEFRIVER
-M: Tom Zanussi <tom.zanussi@intel.com>
+M: Nitin A Kamble<nitin.a.kamble@intel.com>
F: meta-chiefriver/
COMMON
-M: Tom Zanussi <tom.zanussi@intel.com>
+M: Nitin A Kamble<nitin.a.kamble@intel.com>
F: common/recipes-core/
CROWNBAY
-M: Tom Zanussi <tom.zanussi@intel.com>
+M: Nitin A Kamble<nitin.a.kamble@intel.com>
F: meta-crownbay/
CRYSTALFOREST
@@ -53,7 +53,7 @@ M: Kishore Bodke <kishore.k.bodke@intel.com>
F: meta-crystalforest/
EMENLOW
-M: Tom Zanussi <tom.zanussi@intel.com>
+M: Nitin A Kamble<nitin.a.kamble@intel.com>
F: meta-emenlow/
FRI2
@@ -61,7 +61,7 @@ M: Darren Hart <dvhart@linux.intel.com>
F: meta-fri2/
JASPERFOREST
-M: Tom Zanussi <tom.zanussi@intel.com>
+M: Nitin A Kamble<nitin.a.kamble@intel.com>
F: meta-jasperforest/
N450
@@ -73,6 +73,6 @@ M: Kishore Bodke <kishore.k.bodke@intel.com>
F: meta-romley/
SUGARBAY
-M: Tom Zanussi <tom.zanussi@intel.com>
+M: Nitin A Kamble<nitin.a.kamble@intel.com>
F: meta-sugarbay/
diff --git a/meta-chiefriver/README b/meta-chiefriver/README
index 438c293..7c47b02 100644
--- a/meta-chiefriver/README
+++ b/meta-chiefriver/README
@@ -24,6 +24,17 @@ This layer depends on:
branch: master
+Patches
+=======
+
+Please submit any patches against this BSP to the Yocto mailing list
+(yocto@yoctoproject.org) and cc: the maintainer:
+
+Maintainer: Nitin A Kamble <nitin.a.kamble@intel.com>
+
+Please see the meta-intel/MAINTAINERS file for more details.
+
+
Table of Contents
=================
diff --git a/meta-crownbay/README b/meta-crownbay/README
index f7aeffa..4bc9f31 100644
--- a/meta-crownbay/README
+++ b/meta-crownbay/README
@@ -32,7 +32,7 @@ Patches
Please submit any patches against this BSP to the Yocto mailing list
(yocto@yoctoproject.org) and cc: the maintainer:
-Maintainer: Tom Zanussi <tom.zanussi@intel.com>
+Maintainer: Nitin A Kamble <nitin.a.kamble@intel.com>
Please see the meta-intel/MAINTAINERS file for more details.
diff --git a/meta-emenlow/README b/meta-emenlow/README
index 9bef671..3932718 100644
--- a/meta-emenlow/README
+++ b/meta-emenlow/README
@@ -36,7 +36,7 @@ Patches
Please submit any patches against this BSP to the Yocto mailing list
(yocto@yoctoproject.org) and cc: the maintainer:
-Maintainer: Tom Zanussi <tom.zanussi@intel.com>
+Maintainer: Nitin A Kamble <nitin.a.kamble@intel.com>
Please see the meta-intel/MAINTAINERS file for more details.
diff --git a/meta-jasperforest/README b/meta-jasperforest/README
index 78852bd..12f84c2 100644
--- a/meta-jasperforest/README
+++ b/meta-jasperforest/README
@@ -31,7 +31,7 @@ Patches
Please submit any patches against this BSP to the Yocto mailing list
(yocto@yoctoproject.org) and cc: the maintainer:
-Maintainer: Tom Zanussi <tom.zanussi@intel.com>
+Maintainer: Nitin A Kamble <nitin.a.kamble@intel.com>
Please see the meta-intel/MAINTAINERS file for more details.
diff --git a/meta-sugarbay/README b/meta-sugarbay/README
index 80833c1..c8a99d7 100644
--- a/meta-sugarbay/README
+++ b/meta-sugarbay/README
@@ -30,7 +30,7 @@ Patches
Please submit any patches against this BSP to the Yocto mailing list
(yocto@yoctoproject.org) and cc: the maintainer:
-Maintainer: Tom Zanussi <tom.zanussi@intel.com>
+Maintainer: Nitin A Kamble <nitin.a.kamble@intel.com>
Please see the meta-intel/MAINTAINERS file for more details.
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCHv2 4/5] fishriver BSP retirement
2012-10-10 1:16 ` [PATCHv2 4/5] fishriver BSP retirement nitin.a.kamble
@ 2012-10-10 2:42 ` Darren Hart
2012-10-10 2:50 ` Kamble, Nitin A
2012-10-10 21:06 ` Bruce Ashfield
1 sibling, 1 reply; 19+ messages in thread
From: Darren Hart @ 2012-10-10 2:42 UTC (permalink / raw)
To: nitin.a.kamble; +Cc: yocto
On 10/09/2012 06:16 PM, nitin.a.kamble@intel.com wrote:
> From: Nitin A Kamble <nitin.a.kamble@intel.com>
>
> This commit removes fishriver bsp from meta-intel layer.
>
> Fish-River-Islnad-2 hardware and BSP has made this
s/Islnad/Island/
> Fish-River-Island hardware and BSP absolute.
s/absolute/obsolete/
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 1/5] xf86-video-intel: Bring 2.20.0 version to match released graphics stack
2012-10-10 1:16 ` [PATCHv2 1/5] xf86-video-intel: Bring 2.20.0 version to match released graphics stack nitin.a.kamble
@ 2012-10-10 2:43 ` Darren Hart
2012-10-10 9:23 ` Burton, Ross
0 siblings, 1 reply; 19+ messages in thread
From: Darren Hart @ 2012-10-10 2:43 UTC (permalink / raw)
To: nitin.a.kamble; +Cc: yocto
On 10/09/2012 06:16 PM, nitin.a.kamble@intel.com wrote:
> From: Nitin A Kamble <nitin.a.kamble@intel.com>
>
> The Intel Linux graphics stack version 12.07 released on 2012-07-24
> requires version 2.20.0 as seen here:
> http://intellinuxgraphics.org/2012.07.html
>
> Currently oecore has 2.19.0 version. So get this 2.20.0 version in
> meta-intel layer to be used by sugarbay and other BSPs using the
> Intel graphics stack.
>
> Also took changes from version 2.20.8 recipe from Ross Burton's branch.
Saw you asked in a bug about the impact of this, I'd like to hear back
from Ross on the changes regarding xvmc and PACKAGECONFIG.
--
Darren
>
> Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
> ---
> .../xorg-driver/xf86-video-intel_2.20.0.bb | 27 ++++++++++++++++
> .../xorg-driver/xorg-driver-common.inc | 33 ++++++++++++++++++++
> .../xorg-driver/xorg-driver-video.inc | 4 ++
> 3 files changed, 64 insertions(+), 0 deletions(-)
> create mode 100644 common/recipes-graphics/xorg-driver/xf86-video-intel_2.20.0.bb
> create mode 100644 common/recipes-graphics/xorg-driver/xorg-driver-common.inc
> create mode 100644 common/recipes-graphics/xorg-driver/xorg-driver-video.inc
>
> diff --git a/common/recipes-graphics/xorg-driver/xf86-video-intel_2.20.0.bb b/common/recipes-graphics/xorg-driver/xf86-video-intel_2.20.0.bb
> new file mode 100644
> index 0000000..6cfca03
> --- /dev/null
> +++ b/common/recipes-graphics/xorg-driver/xf86-video-intel_2.20.0.bb
> @@ -0,0 +1,27 @@
> +require xorg-driver-video.inc
> +
> +SUMMARY = "X.Org X server -- Intel integrated graphics chipsets driver"
> +
> +DESCRIPTION = "intel is an Xorg driver for Intel integrated graphics \
> +chipsets. The driver supports depths 8, 15, 16 and 24. On some chipsets, \
> +the driver supports hardware accelerated 3D via the Direct Rendering \
> +Infrastructure (DRI)."
> +
> +LIC_FILES_CHKSUM = "file://COPYING;md5=8730ad58d11c7bbad9a7066d69f7808e"
> +
> +PR = "${INC_PR}.0"
> +
> +DEPENDS += "virtual/libx11 drm xf86driproto glproto \
> + virtual/libgl xineramaproto xf86driproto libpciaccess"
> +
> +PACKAGECONFIG ??= ""
> +PACKAGECONFIG[sna] = "--enable-sna,--disable-sna"
> +PACKAGECONFIG[xvmc] = "--enable-xvmc,--disable-xvmc,libxvmc"
> +
> +# --enable-kms-only option is required by ROOTLESS_X
> +EXTRA_OECONF += '${@base_conditional( "ROOTLESS_X", "1", " --enable-kms-only", "", d )}'
> +
> +COMPATIBLE_HOST = '(i.86|x86_64).*-linux'
> +
> +SRC_URI[md5sum] = "070bb866b05a16366bd9bb844c9b91aa"
> +SRC_URI[sha256sum] = "21949297220ceda32bba430f778c6409002079dc717c7190dbd1062ab4a56783"
> diff --git a/common/recipes-graphics/xorg-driver/xorg-driver-common.inc b/common/recipes-graphics/xorg-driver/xorg-driver-common.inc
> new file mode 100644
> index 0000000..1ed2742
> --- /dev/null
> +++ b/common/recipes-graphics/xorg-driver/xorg-driver-common.inc
> @@ -0,0 +1,33 @@
> +DESCRIPTION = "X driver"
> +HOMEPAGE = "http://www.x.org"
> +BUGTRACKER = "https://bugs.freedesktop.org"
> +SECTION = "x11/drivers"
> +LICENSE = "MIT-X"
> +
> +PE = "2"
> +INC_PR = "r0"
> +
> +DEPENDS = "virtual/xserver xproto randrproto util-macros"
> +
> +SRC_URI = "${XORG_MIRROR}/individual/driver/${BPN}-${PV}.tar.bz2"
> +
> +S = "${WORKDIR}/${BPN}-${PV}"
> +
> +FILES_${PN} += " ${libdir}/xorg/modules/drivers/*.so"
> +FILES_${PN}-dbg += " ${libdir}/xorg/modules/drivers/.debug"
> +
> +inherit autotools pkgconfig
> +
> +# AC_CHECK_FILE doesn't work when cross compiling, so we create a replacement
> +# macro that simply assumes the test succeeds.
> +do_configure_prepend () {
> + echo 'AC_DEFUN(CC_AC_CHECK_FILE, $2)' > configure.ac.new
> + sed 's/AC_CHECK_FILE/CC_AC_CHECK_FILE/g' configure.ac >> configure.ac.new
> + mv configure.ac.new configure.ac
> +}
> +
> +# FIXME: We don't want to include the libtool archives (*.la) from modules
> +# directory, as they serve no useful purpose. Upstream should fix Makefile.am
> +do_install_append() {
> + find ${D}${libdir}/xorg/modules -regex ".*\.la$" | xargs rm -f --
> +}
> diff --git a/common/recipes-graphics/xorg-driver/xorg-driver-video.inc b/common/recipes-graphics/xorg-driver/xorg-driver-video.inc
> new file mode 100644
> index 0000000..57c80d1
> --- /dev/null
> +++ b/common/recipes-graphics/xorg-driver/xorg-driver-video.inc
> @@ -0,0 +1,4 @@
> +include xorg-driver-common.inc
> +
> +DEPENDS =+ "renderproto videoproto xextproto fontsproto"
> +
>
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 3/5] emgd-driver_bin_1.10: Remove in favor of 1.14
2012-10-10 1:16 ` [PATCHv2 3/5] emgd-driver_bin_1.10: Remove in favor of 1.14 nitin.a.kamble
@ 2012-10-10 2:45 ` Darren Hart
0 siblings, 0 replies; 19+ messages in thread
From: Darren Hart @ 2012-10-10 2:45 UTC (permalink / raw)
To: nitin.a.kamble; +Cc: yocto
On 10/09/2012 06:16 PM, nitin.a.kamble@intel.com wrote:
> From: Nitin A Kamble <nitin.a.kamble@intel.com>
>
> All BSPs have been migrated to 1.14, we can now safely retire 1.10
>
> Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
> ---
> .../xorg-driver/emgd-driver-bin_1.10.bb | 93 --------------------
> 1 files changed, 0 insertions(+), 93 deletions(-)
> delete mode 100644 common/recipes-graphics/xorg-driver/emgd-driver-bin_1.10.bb
>
> diff --git a/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.10.bb b/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.10.bb
> deleted file mode 100644
> index 6d80bee..0000000
> --- a/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.10.bb
> +++ /dev/null
> @@ -1,93 +0,0 @@
> -SUMMARY = "EMGD 1.10 xserver binaries"
> -DESCRIPTION = "EMGD 1.10 includes some userspace binaries that use non-free \
> -licensing, which are now available via a non-click-through downloadable \
> -tarball, and is what this recipe now uses. Since it is a non-free license, \
> -this recipe is marked as 'License_emgd-driver-bin_1.10' and you need to add \
> -to LICENSE_FLAGS_WHITELIST += \"License_emgd-driver-bin_1.10\" to your \
> -local.conf in order to enable it in a build."
> -LICENSE = "Intel-binary-only"
> -LICENSE_FLAGS = "license_${PN}_${PV}"
> -PR = "r1"
> -
> -EMGD_LIC_DIR = "IEMGD_HEAD_Linux/License"
> -EMGD_RPM_DIR = "IEMGD_HEAD_Linux/MeeGo1.2"
> -EMGD_VIDEO_PLUGIN_DIR = "../common/video_plugin"
> -
> -LIC_FILES_CHKSUM = "file://${WORKDIR}/${EMGD_LIC_DIR}/License.txt;md5=b54f01caaf8483b3cb60c0c40f2bf22d"
> -
> -DEPENDS = "rpm-native xz-native"
> -
> -SRC_URI = "https://edc.intel.com/App_Shared/Downloads/LIN_EMGD_1_10_RC_2209.tgz"
> -
> -SRC_URI[md5sum] = "e4a38d9efa0b086ae21b68145c4db4e9"
> -SRC_URI[sha256sum] = "acea5f0f93a31553553428623c007d7ed0c604cf715fd87dfe075751da4be548"
> -
> -# These are closed binaries generated elsewhere so don't check ldflags
> -INSANE_SKIP_${PN} = "ldflags"
> -# Inhibit warnings about files being stripped, we can't do anything about it.
> -INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
> -
> -FILES_${PN} += "${libdir}/dri ${libdir}/gstreamer-0.10 ${libdir}/xorg/modules/drivers"
> -FILES_${PN}-dbg += "${libdir}/xorg/modules/drivers/.debug ${libdir}/dri/.debug"
> -
> -S = "${WORKDIR}/${EMGD_RPM_DIR}"
> -
> -do_install () {
> - # A gstreamer VA buffer library
> - rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/gst-vabuffer*.rpm | cpio -id
> -
> - # MIX Common contains common classes, datatype, header files used by other MIX components
> - rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/mixcommon*.rpm | cpio -id
> -
> - # MIX Video Bitstream Parser is an user library interface for various video format bitstream parsing
> - rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/mixvbp*.rpm | cpio -id
> -
> - # MIX Video is an user library interface for various video codecs available on the platform.
> - rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/mixvideo*.rpm | cpio -id
> -
> - install -d -m 0755 ${D}${libdir}/gstreamer-0.10
> - install -m 0755 ${S}/usr/lib/* ${D}${libdir}/
> -
> - # A gstreamer plugin that uses MIX Video for hardware accelerated video decoding and rendering.
> - rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/gst-plugins-mixvideo*.rpm | cpio -id
> -
> - # A collection of gstreamer plugins that uses VA libraries for hardware accelerated video rendering and text overlay.
> - rpm2cpio ${S}/${EMGD_VIDEO_PLUGIN_DIR}/gst-plugins-va*.rpm | cpio -id
> -
> - install -m 0755 ${S}/usr/lib/gstreamer-0.10/* ${D}${libdir}/gstreamer-0.10/
> -
> - # EMGD runtime graphics libraries
> - rpm2cpio ${S}/emgd-bin*.rpm | xz -d | cpio -id
> -
> - install -d -m 0755 ${D}${libdir}/dri
> - install -d -m 0755 ${D}${libdir}/xorg/modules/drivers
> - install -d -m 0755 ${D}${sysconfdir}
> - install -d -m 0755 ${D}${mandir}/man4
> - install -m 0755 ${S}/usr/lib/*.so.* ${D}${libdir}/
> - install -m 0755 ${S}/usr/lib/dri/* ${D}${libdir}/dri/
> - install -m 0755 ${S}/usr/lib/xorg/modules/drivers/* ${D}${libdir}/xorg/modules/drivers/
> - install -m 0755 ${S}/etc/* ${D}${sysconfdir}/
> - install -m 0755 ${S}/usr/share/man/man4/* ${D}${mandir}/man4/
> -
> - # Khronos development headers needed for EGL, OpenGL-ES, and OpenVG development
> - rpm2cpio ${S}/emgd-devel*.rpm | xz -d | cpio -id
> -
> - install -d -m 0755 ${D}${includedir}/EGL
> - install -m 0755 ${S}/usr/include/EGL/*.h ${D}${includedir}/EGL/
> - install -d -m 0755 ${D}${includedir}/GLES
> - install -m 0755 ${S}/usr/include/GLES/*.h ${D}${includedir}/GLES/
> - install -d -m 0755 ${D}${includedir}/GLES2
> - install -m 0755 ${S}/usr/include/GLES2/*.h ${D}${includedir}/GLES2/
> - install -d -m 0755 ${D}${includedir}/KHR
> - install -m 0755 ${S}/usr/include/KHR/*.h ${D}${includedir}/KHR/
> - install -d -m 0755 ${D}${includedir}/VG
> - install -m 0755 ${S}/usr/include/VG/*.h ${D}${includedir}/VG/
> -
> - ln -sf libEGL.so.1 ${D}${libdir}/libEGL.so
> - ln -sf libGLES_CM.so.1 ${D}${libdir}/libGLES_CM.so
> - ln -sf libGLESv2.so.2 ${D}${libdir}/libGLESv2.so
> - ln -sf libOpenVG.so.1 ${D}${libdir}/libOpenVG.so
> - ln -sf libOpenVGU.so.1 ${D}${libdir}/libOpenVGU.so
> -}
> -
> -LEAD_SONAME = "libEGL.so"
>
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 2/5] crownbay.conf: specify the 8.0.4 version as preferred version of mesa-dri
2012-10-10 1:16 ` [PATCHv2 2/5] crownbay.conf: specify the 8.0.4 version as preferred version of mesa-dri nitin.a.kamble
@ 2012-10-10 2:45 ` Darren Hart
2012-10-10 9:25 ` Burton, Ross
1 sibling, 0 replies; 19+ messages in thread
From: Darren Hart @ 2012-10-10 2:45 UTC (permalink / raw)
To: nitin.a.kamble; +Cc: yocto
On 10/09/2012 06:16 PM, nitin.a.kamble@intel.com wrote:
> From: Nitin A Kamble <nitin.a.kamble@intel.com>
>
> Avoid following warnings while building crownbay BSPs:
>
> NOTE: preferred version 7.11 of mesa-dri not available (for item virtual/libgl)
> NOTE: versions of mesa-dri available: 2:8.0.4 2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
>
> This commit addresses one of the issue reported on the bug:
> [YOCTO #3238]
>
> Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
> ---
> meta-crownbay/conf/machine/crownbay.conf | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/meta-crownbay/conf/machine/crownbay.conf b/meta-crownbay/conf/machine/crownbay.conf
> index c18fa1d..72431de 100644
> --- a/meta-crownbay/conf/machine/crownbay.conf
> +++ b/meta-crownbay/conf/machine/crownbay.conf
> @@ -18,7 +18,7 @@ XSERVER ?= "${XSERVER_IA32_BASE} \
> "
>
> PREFERRED_VERSION_xserver-xorg ?= "1.9.3"
> -PREFERRED_VERSION_mesa-dri ?= "7.11"
> +PREFERRED_VERSION_mesa-dri ?= "8.0.4"
> PREFERRED_VERSION_xf86-input-evdev ?= "2.6.0"
>
> APPEND += "video=vesafb vga=0x318 vmalloc=256MB"
>
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 4/5] fishriver BSP retirement
2012-10-10 2:42 ` Darren Hart
@ 2012-10-10 2:50 ` Kamble, Nitin A
2012-10-10 3:07 ` Darren Hart
0 siblings, 1 reply; 19+ messages in thread
From: Kamble, Nitin A @ 2012-10-10 2:50 UTC (permalink / raw)
To: Hart, Darren; +Cc: yocto
Sorry for these typos. I fixed these on the contrib branch.
Thanks,
Nitin
> -----Original Message-----
> From: Hart, Darren
> Sent: Tuesday, October 09, 2012 7:42 PM
> To: Kamble, Nitin A
> Cc: Zanussi, Tom; yocto@yoctoproject.org
> Subject: Re: [PATCHv2 4/5] fishriver BSP retirement
>
> On 10/09/2012 06:16 PM, nitin.a.kamble@intel.com wrote:
> > From: Nitin A Kamble <nitin.a.kamble@intel.com>
> >
> > This commit removes fishriver bsp from meta-intel layer.
> >
> > Fish-River-Islnad-2 hardware and BSP has made this
>
> s/Islnad/Island/
>
> > Fish-River-Island hardware and BSP absolute.
>
> s/absolute/obsolete/
>
> --
> Darren Hart
> Intel Open Source Technology Center
> Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 4/5] fishriver BSP retirement
2012-10-10 2:50 ` Kamble, Nitin A
@ 2012-10-10 3:07 ` Darren Hart
0 siblings, 0 replies; 19+ messages in thread
From: Darren Hart @ 2012-10-10 3:07 UTC (permalink / raw)
To: Kamble, Nitin A; +Cc: yocto
On 10/09/2012 07:50 PM, Kamble, Nitin A wrote:
> Sorry for these typos. I fixed these on the contrib branch.
>
Acked-by: Darren Hart <dvhart@linux.intel.com>
> Thanks,
> Nitin
>
>
>> -----Original Message-----
>> From: Hart, Darren
>> Sent: Tuesday, October 09, 2012 7:42 PM
>> To: Kamble, Nitin A
>> Cc: Zanussi, Tom; yocto@yoctoproject.org
>> Subject: Re: [PATCHv2 4/5] fishriver BSP retirement
>>
>> On 10/09/2012 06:16 PM, nitin.a.kamble@intel.com wrote:
>>> From: Nitin A Kamble <nitin.a.kamble@intel.com>
>>>
>>> This commit removes fishriver bsp from meta-intel layer.
>>>
>>> Fish-River-Islnad-2 hardware and BSP has made this
>>
>> s/Islnad/Island/
>>
>>> Fish-River-Island hardware and BSP absolute.
>>
>> s/absolute/obsolete/
>>
>> --
>> Darren Hart
>> Intel Open Source Technology Center
>> Yocto Project - Linux Kernel
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 1/5] xf86-video-intel: Bring 2.20.0 version to match released graphics stack
2012-10-10 2:43 ` Darren Hart
@ 2012-10-10 9:23 ` Burton, Ross
0 siblings, 0 replies; 19+ messages in thread
From: Burton, Ross @ 2012-10-10 9:23 UTC (permalink / raw)
To: Darren Hart; +Cc: yocto
On 10 October 2012 03:43, Darren Hart <darren.hart@intel.com> wrote:
> Saw you asked in a bug about the impact of this, I'd like to hear back
> from Ross on the changes regarding xvmc and PACKAGECONFIG.
So everyone hears and not just people on the bug, I'll repeat what I put.
XVMC is disabled by default (as before) but available to be enabled
via PACKAGECONFIG.
SNA (new acceleration architecture) is disabled by default but also
enabled via PACKAGECONFIG. Enabling SNA adds about 1MB to the binary.
Ross
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 2/5] crownbay.conf: specify the 8.0.4 version as preferred version of mesa-dri
2012-10-10 1:16 ` [PATCHv2 2/5] crownbay.conf: specify the 8.0.4 version as preferred version of mesa-dri nitin.a.kamble
2012-10-10 2:45 ` Darren Hart
@ 2012-10-10 9:25 ` Burton, Ross
2012-10-10 23:14 ` Kamble, Nitin A
1 sibling, 1 reply; 19+ messages in thread
From: Burton, Ross @ 2012-10-10 9:25 UTC (permalink / raw)
To: nitin.a.kamble; +Cc: yocto, darren.hart
On 10 October 2012 02:16, <nitin.a.kamble@intel.com> wrote:
> Avoid following warnings while building crownbay BSPs:
>
> NOTE: preferred version 7.11 of mesa-dri not available (for item virtual/libgl)
> NOTE: versions of mesa-dri available: 2:8.0.4 2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
This is the preferred version in oe-core, so wouldn't it be easier to
just drop this preferred version line and avoid this repeating itself
in the future?
Ross
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 4/5] fishriver BSP retirement
2012-10-10 1:16 ` [PATCHv2 4/5] fishriver BSP retirement nitin.a.kamble
2012-10-10 2:42 ` Darren Hart
@ 2012-10-10 21:06 ` Bruce Ashfield
2012-10-10 23:18 ` Kamble, Nitin A
1 sibling, 1 reply; 19+ messages in thread
From: Bruce Ashfield @ 2012-10-10 21:06 UTC (permalink / raw)
To: nitin.a.kamble; +Cc: yocto, darren.hart
On 12-10-09 09:16 PM, nitin.a.kamble@intel.com wrote:
> From: Nitin A Kamble<nitin.a.kamble@intel.com>
>
> This commit removes fishriver bsp from meta-intel layer.
>
> Fish-River-Islnad-2 hardware and BSP has made this
> Fish-River-Island hardware and BSP absolute.
> Also we discussed this on the Yocto Execution Tracking Meeting,
> and to our knowledge no customer is using (cares about) this BSP now.
Just so I don't forget, can you send a patch that also removes the
kernel meta data for the BSP ? That way I won't recreate the branch
for future releases :)
I assume it is ok that the kernel branches stay in the 3.x kernels
for the yocto 1.3 release ?
Cheers,
Bruce
>
> Signed-off-by: Nitin A Kamble<nitin.a.kamble@intel.com>
> ---
> MAINTAINERS | 4 -
> meta-fishriver/COPYING.MIT | 17 ---
> meta-fishriver/README | 114 --------------------
> meta-fishriver/README.sources | 17 ---
> meta-fishriver/conf/layer.conf | 12 --
> meta-fishriver/conf/machine/fishriver.conf | 17 ---
> .../formfactor/formfactor/fishriver/machconfig | 3 -
> .../recipes-bsp/formfactor/formfactor_0.0.bbappend | 3 -
> .../xserver-xf86-config/fishriver/xorg.conf | 26 -----
> .../xorg-xserver/xserver-xf86-config_0.1.bbappend | 1 -
> .../linux/linux-yocto-rt_3.0.bbappend | 8 --
> .../linux/linux-yocto-rt_3.2.bbappend | 8 --
> .../recipes-kernel/linux/linux-yocto_3.0.bbappend | 9 --
> .../recipes-kernel/linux/linux-yocto_3.2.bbappend | 8 --
> .../recipes-kernel/linux/linux-yocto_3.4.bbappend | 8 --
> 15 files changed, 0 insertions(+), 255 deletions(-)
> delete mode 100644 meta-fishriver/COPYING.MIT
> delete mode 100644 meta-fishriver/README
> delete mode 100644 meta-fishriver/README.sources
> delete mode 100644 meta-fishriver/binary/.gitignore
> delete mode 100644 meta-fishriver/conf/layer.conf
> delete mode 100644 meta-fishriver/conf/machine/fishriver.conf
> delete mode 100644 meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfig
> delete mode 100644 meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
> delete mode 100644 meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fishriver/xorg.conf
> delete mode 100644 meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
> delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
> delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
> delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
> delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
> delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5bcf470..3bf0add 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -56,10 +56,6 @@ EMENLOW
> M: Tom Zanussi<tom.zanussi@intel.com>
> F: meta-emenlow/
>
> -FISHRIVER
> -M: Tom Zanussi<tom.zanussi@intel.com>
> -F: meta-fishriver/
> -
> FRI2
> M: Darren Hart<dvhart@linux.intel.com>
> F: meta-fri2/
> diff --git a/meta-fishriver/COPYING.MIT b/meta-fishriver/COPYING.MIT
> deleted file mode 100644
> index fb950dc..0000000
> --- a/meta-fishriver/COPYING.MIT
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -Permission is hereby granted, free of charge, to any person obtaining a copy
> -of this software and associated documentation files (the "Software"), to deal
> -in the Software without restriction, including without limitation the rights
> -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> -copies of the Software, and to permit persons to whom the Software is
> -furnished to do so, subject to the following conditions:
> -
> -The above copyright notice and this permission notice shall be included in
> -all copies or substantial portions of the Software.
> -
> -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
> -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> -THE SOFTWARE.
> diff --git a/meta-fishriver/README b/meta-fishriver/README
> deleted file mode 100644
> index 1dd0a4c..0000000
> --- a/meta-fishriver/README
> +++ /dev/null
> @@ -1,114 +0,0 @@
> -This README file contains information on building the meta-fishriver
> -BSP layer, and booting the images contained in the /binary directory.
> -Please see the corresponding sections below for details.
> -
> -
> -Dependencies
> -============
> -
> -This layer depends on:
> -
> - URI: git://git.openembedded.org/bitbake
> - branch: master
> -
> - URI: git://git.openembedded.org/openembedded-core
> - layers: meta
> - branch: master
> -
> - URI: git://git.yoctoproject.org/meta-intel
> - layers: intel
> - branch: master
> -
> -
> -Patches
> -=======
> -
> -Please submit any patches against this BSP to the Yocto mailing list
> -(yocto@yoctoproject.org) and cc: the maintainer:
> -
> -Maintainer: Tom Zanussi<tom.zanussi@intel.com>
> -
> -Please see the meta-intel/MAINTAINERS file for more details.
> -
> -
> -Table of Contents
> -=================
> -
> - I. Building the meta-fishriver BSP layer
> - II. Booting the images in /binary
> -
> -
> -I. Building the meta-fishriver BSP layer
> -========================================
> -
> -In order to build an image with BSP support for a given release, you
> -need to download the corresponding BSP tarball from the 'Board Support
> -Package (BSP) Downloads' page of the Yocto Project website.
> -
> -Having done that, and assuming you extracted the BSP tarball contents
> -at the top-level of your yocto build tree, you can build a fishriver
> -image by adding the location of the meta-fishriver layer to
> -bblayers.conf, along with the meta-intel layer itself (to access
> -common metadata shared between BSPs) e.g.:
> -
> - yocto/meta-intel \
> - yocto/meta-intel/meta-fishriver \
> -
> -To enable the fishriver layer, add the fishriver MACHINE to local.conf:
> -
> - MACHINE ?= "fishriver"
> -
> -You should then be able to build a fishriver image as such:
> -
> - $ source oe-init-build-env
> - $ bitbake core-image-sato
> -
> -At the end of a successful build, you should have a live image that
> -you can boot from a USB flash drive (see instructions on how to do
> -that below, in the section 'Booting the images from /binary').
> -
> -As an alternative to downloading the BSP tarball, you can also work
> -directly from the meta-intel git repository. For each BSP in the
> -'meta-intel' repository, there are multiple branches, one
> -corresponding to each major release starting with 'laverne' (0.90), in
> -addition to the latest code which tracks the current master (note that
> -not all BSPs are present in every release). Instead of extracting a
> -BSP tarball at the top level of your yocto build tree, you can
> -equivalently check out the appropriate branch from the meta-intel
> -repository at the same location.
> -
> -
> -II. Booting the images in /binary
> -=================================
> -
> -This BSP contains bootable live images, which can be used to directly
> -boot Yocto off of a USB flash drive.
> -
> -Under Linux, insert a USB flash drive. Assuming the USB flash drive
> -takes device /dev/sdf, use dd to copy the live image to it. For
> -example:
> -
> -# dd if=core-image-sato-fishriver-20101207053738.hddimg of=/dev/sdf
> -# sync
> -# eject /dev/sdf
> -
> -This should give you a bootable USB flash device. Insert the device
> -into a bootable USB socket on the target, and power on. This should
> -result in a system booted to the Sato graphical desktop.
> -
> -If you want a terminal, use the arrows at the top of the UI to move to
> -different pages of available applications, one of which is named
> -'Terminal'. Clicking that should give you a root terminal.
> -
> -If you want to ssh into the system, you can use the root terminal to
> -ifconfig the IP address and use that to ssh in. The root password is
> -empty, so to log in type 'root' for the user name and hit 'Enter' at
> -the Password prompt: and you should be in.
> -
> -----
> -
> -If you find you're getting corrupt images on the USB (it doesn't show
> -the syslinux boot: prompt, or the boot: prompt contains strange
> -characters), try doing this first:
> -
> -# dd if=/dev/zero of=/dev/sdf bs=1M count=512
> diff --git a/meta-fishriver/README.sources b/meta-fishriver/README.sources
> deleted file mode 100644
> index 76180f1..0000000
> --- a/meta-fishriver/README.sources
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -The sources for the packages comprising the images shipped with this
> -BSP can be found at the following location:
> -
> -http://downloads.yoctoproject.org/mirror/sources/
> -
> -The metadata used to generate the images shipped with this BSP, in
> -addition to the code contained in this BSP, can be found at the
> -following location:
> -
> -http://www.yoctoproject.org/downloads/yocto-1.2/poky-denzil-7.0.tar.bz2
> -
> -The metadata used to generate the images shipped with this BSP, in
> -addition to the code contained in this BSP, can also be found at the
> -following locations:
> -
> -git://git.yoctoproject.org/poky.git
> -git://git.yoctoproject.org/meta-intel
> diff --git a/meta-fishriver/binary/.gitignore b/meta-fishriver/binary/.gitignore
> deleted file mode 100644
> index e69de29..0000000
> diff --git a/meta-fishriver/conf/layer.conf b/meta-fishriver/conf/layer.conf
> deleted file mode 100644
> index 61e292b..0000000
> --- a/meta-fishriver/conf/layer.conf
> +++ /dev/null
> @@ -1,12 +0,0 @@
> -# We have a conf and classes directory, add to BBPATH
> -BBPATH := "${BBPATH}:${LAYERDIR}"
> -
> -# We have a recipes directory, add to BBFILES
> -BBFILES := "${BBFILES} ${LAYERDIR}/recipes-*/*/*.bb \
> - ${LAYERDIR}/recipes-*/*/*.bbappend"
> -
> -BBFILE_COLLECTIONS += "fishriver"
> -BBFILE_PATTERN_fishriver := "^${LAYERDIR}/"
> -BBFILE_PRIORITY_fishriver = "6"
> -
> -LAYERDEPENDS_fishriver = "intel"
> diff --git a/meta-fishriver/conf/machine/fishriver.conf b/meta-fishriver/conf/machine/fishriver.conf
> deleted file mode 100644
> index ec2e87f..0000000
> --- a/meta-fishriver/conf/machine/fishriver.conf
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -#@TYPE: Machine
> -#@NAME: fishriver
> -
> -#@DESCRIPTION: Machine configuration for Fish River Island systems
> -# i.e. Z530/E660 + EG20T
> -
> -PREFERRED_VERSION_linux-yocto ?= "3.4%"
> -
> -require conf/machine/include/tune-atom.inc
> -require conf/machine/include/ia32-base.inc
> -
> -XSERVER ?= "${XSERVER_IA32_BASE} \
> - ${XSERVER_IA32_EXT} \
> - ${XSERVER_IA32_VESA} \
> - "
> -
> -APPEND += "video=vesafb vga=0x318"
> diff --git a/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfig b/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfig
> deleted file mode 100644
> index ffce012..0000000
> --- a/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfig
> +++ /dev/null
> @@ -1,3 +0,0 @@
> -# Assume a USB mouse and keyboard are connected
> -HAVE_TOUCHSCREEN=0
> -HAVE_KEYBOARD=1
> diff --git a/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend b/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
> deleted file mode 100644
> index 54da0ff..0000000
> --- a/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
> +++ /dev/null
> @@ -1,3 +0,0 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> -
> -PRINC = "1"
> diff --git a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fishriver/xorg.conf b/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fishriver/xorg.conf
> deleted file mode 100644
> index da4fc3c..0000000
> --- a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fishriver/xorg.conf
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -Section "Device"
> - Identifier "Generic VESA"
> - Driver "vesa"
> -EndSection
> -
> -Section "Monitor"
> - Identifier "Generic Monitor"
> - Option "DPMS"
> -EndSection
> -
> -Section "Screen"
> - Identifier "Default Screen"
> - Device "Generic VESA"
> - Monitor "Generic Monitor"
> - DefaultDepth 24
> -EndSection
> -
> -Section "ServerLayout"
> - Identifier "Default Layout"
> - Screen "Default Screen"
> -EndSection
> -
> -Section "ServerFlags"
> - Option "DontZap" "0"
> - Option "AutoAddDevices" "False"
> -EndSection
> diff --git a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend b/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
> deleted file mode 100644
> index 72d991c..0000000
> --- a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
> +++ /dev/null
> @@ -1 +0,0 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> diff --git a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend b/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
> deleted file mode 100644
> index 7a502bd..0000000
> --- a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> -COMPATIBLE_MACHINE_fishriver = "fishriver"
> -KMACHINE_fishriver = "fishriver"
> -
> -# Update the following to use a different BSP branch or meta SRCREV
> -#KBRANCH_fishriver = "yocto/standard/preempt-rt/base"
> -#SRCREV_machine_pn-linux-yocto-rt_fishriver ?= XXXX
> -#SRCREV_meta_pn-linux-yocto-rt_fishriver ?= XXXX
> diff --git a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend b/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
> deleted file mode 100644
> index a91a425..0000000
> --- a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> -COMPATIBLE_MACHINE_fishriver = "fishriver"
> -KMACHINE_fishriver = "fishriver"
> -
> -# Update the following to use a different BSP branch or meta SRCREV
> -#KBRANCH_fishriver = "standard/preempt-rt/base"
> -#SRCREV_machine_pn-linux-yocto-rt_fishriver ?= XXXX
> -#SRCREV_meta_pn-linux-yocto-rt_fishriver ?= XXXX
> diff --git a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
> deleted file mode 100644
> index 6ac6ef5..0000000
> --- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
> +++ /dev/null
> @@ -1,9 +0,0 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> -
> -COMPATIBLE_MACHINE_fishriver = "fishriver"
> -KMACHINE_fishriver = "fishriver"
> -KBRANCH_fishriver = "yocto/standard/fishriver"
> -KERNEL_FEATURES_append_fishriver += " cfg/smp.scc"
> -
> -SRCREV_machine_pn-linux-yocto_fishriver ?= "c139592c96722727a9f074515a4061c3820da1a6"
> -SRCREV_meta_pn-linux-yocto_fishriver ?= "59314a3523e360796419d76d78c6f7d8c5ef2593"
> diff --git a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
> deleted file mode 100644
> index 9a2f678..0000000
> --- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> -
> -COMPATIBLE_MACHINE_fishriver = "fishriver"
> -KMACHINE_fishriver = "fishriver"
> -KBRANCH_fishriver = "standard/default/fishriver"
> -
> -SRCREV_machine_pn-linux-yocto_fishriver ?= "969edd015a46eed77d6c3daeffdc299dd06e3397"
> -SRCREV_meta_pn-linux-yocto_fishriver ?= "5b4c9dc78b5ae607173cc3ddab9bce1b5f78129b"
> diff --git a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
> deleted file mode 100644
> index c0d04dc..0000000
> --- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> -
> -COMPATIBLE_MACHINE_fishriver = "fishriver"
> -KMACHINE_fishriver = "fishriver"
> -KBRANCH_fishriver = "standard/fishriver"
> -
> -SRCREV_machine_pn-linux-yocto_fishriver ?= "3fa06aa29078fdb2af431de2d3fdae7d281ba85f"
> -SRCREV_meta_pn-linux-yocto_fishriver ?= "5bdc655034a58a7147176a8a882d81e2fd51e4b9"
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 2/5] crownbay.conf: specify the 8.0.4 version as preferred version of mesa-dri
2012-10-10 9:25 ` Burton, Ross
@ 2012-10-10 23:14 ` Kamble, Nitin A
2012-10-11 10:28 ` Burton, Ross
0 siblings, 1 reply; 19+ messages in thread
From: Kamble, Nitin A @ 2012-10-10 23:14 UTC (permalink / raw)
To: Burton, Ross; +Cc: yocto, Hart, Darren
> -----Original Message-----
> From: Burton, Ross [mailto:ross.burton@intel.com]
> Sent: Wednesday, October 10, 2012 2:25 AM
> To: Kamble, Nitin A
> Cc: Zanussi, Tom; Hart, Darren; yocto@yoctoproject.org
> Subject: Re: [yocto] [PATCHv2 2/5] crownbay.conf: specify the 8.0.4 version
> as preferred version of mesa-dri
>
> On 10 October 2012 02:16, <nitin.a.kamble@intel.com> wrote:
> > Avoid following warnings while building crownbay BSPs:
> >
> > NOTE: preferred version 7.11 of mesa-dri not available (for item
> > virtual/libgl)
> > NOTE: versions of mesa-dri available: 2:8.0.4
> > 2:8.0.4+git1+c1f4867c89adb1a6b19d66ec8ad146115909f0a7
>
> This is the preferred version in oe-core, so wouldn't it be easier to just drop
> this preferred version line and avoid this repeating itself in the future?
>
> Ross
Hi Ross,
The reason is we want to know if the version of mesa in oecore has changed or not. EMGD has specific needs of mesa, and in the testing we are not finding any issues with v8.0.4 of mesa. But that may not hold true for future versions of mesa, so we would like to pin the version here so we know that this version works as expected.
Nitin
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 4/5] fishriver BSP retirement
2012-10-10 21:06 ` Bruce Ashfield
@ 2012-10-10 23:18 ` Kamble, Nitin A
2012-10-10 23:26 ` Bruce Ashfield
0 siblings, 1 reply; 19+ messages in thread
From: Kamble, Nitin A @ 2012-10-10 23:18 UTC (permalink / raw)
To: Bruce Ashfield; +Cc: yocto, Hart, Darren
> -----Original Message-----
> From: Bruce Ashfield [mailto:bruce.ashfield@windriver.com]
> Sent: Wednesday, October 10, 2012 2:07 PM
> To: Kamble, Nitin A
> Cc: Zanussi, Tom; Hart, Darren; yocto@yoctoproject.org
> Subject: Re: [yocto] [PATCHv2 4/5] fishriver BSP retirement
>
> On 12-10-09 09:16 PM, nitin.a.kamble@intel.com wrote:
> > From: Nitin A Kamble<nitin.a.kamble@intel.com>
> >
> > This commit removes fishriver bsp from meta-intel layer.
> >
> > Fish-River-Islnad-2 hardware and BSP has made this
> > Fish-River-Island hardware and BSP absolute.
> > Also we discussed this on the Yocto Execution Tracking Meeting, and
> > to our knowledge no customer is using (cares about) this BSP now.
>
> Just so I don't forget, can you send a patch that also removes the kernel
> meta data for the BSP ? That way I won't recreate the branch for future
> releases :)
>
Removing the FRI-1 contents from meta branch of v3.4 kernel tree should be ok because it preserves the old commits.
But I think we will have to leave the topic branch for fishriver machine as it is.
> I assume it is ok that the kernel branches stay in the 3.x kernels for the yocto
> 1.3 release ?
>
I also think that is the right way to handle it.
Regards,
Nitin
> Cheers,
>
> Bruce
>
> >
> > Signed-off-by: Nitin A Kamble<nitin.a.kamble@intel.com>
> > ---
> > MAINTAINERS | 4 -
> > meta-fishriver/COPYING.MIT | 17 ---
> > meta-fishriver/README | 114 --------------------
> > meta-fishriver/README.sources | 17 ---
> > meta-fishriver/conf/layer.conf | 12 --
> > meta-fishriver/conf/machine/fishriver.conf | 17 ---
> > .../formfactor/formfactor/fishriver/machconfig | 3 -
> > .../recipes-bsp/formfactor/formfactor_0.0.bbappend | 3 -
> > .../xserver-xf86-config/fishriver/xorg.conf | 26 -----
> > .../xorg-xserver/xserver-xf86-config_0.1.bbappend | 1 -
> > .../linux/linux-yocto-rt_3.0.bbappend | 8 --
> > .../linux/linux-yocto-rt_3.2.bbappend | 8 --
> > .../recipes-kernel/linux/linux-yocto_3.0.bbappend | 9 --
> > .../recipes-kernel/linux/linux-yocto_3.2.bbappend | 8 --
> > .../recipes-kernel/linux/linux-yocto_3.4.bbappend | 8 --
> > 15 files changed, 0 insertions(+), 255 deletions(-)
> > delete mode 100644 meta-fishriver/COPYING.MIT
> > delete mode 100644 meta-fishriver/README
> > delete mode 100644 meta-fishriver/README.sources
> > delete mode 100644 meta-fishriver/binary/.gitignore
> > delete mode 100644 meta-fishriver/conf/layer.conf
> > delete mode 100644 meta-fishriver/conf/machine/fishriver.conf
> > delete mode 100644 meta-fishriver/recipes-
> bsp/formfactor/formfactor/fishriver/machconfig
> > delete mode 100644 meta-fishriver/recipes-
> bsp/formfactor/formfactor_0.0.bbappend
> > delete mode 100644 meta-fishriver/recipes-graphics/xorg-
> xserver/xserver-xf86-config/fishriver/xorg.conf
> > delete mode 100644 meta-fishriver/recipes-graphics/xorg-
> xserver/xserver-xf86-config_0.1.bbappend
> > delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto-
> rt_3.0.bbappend
> > delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto-
> rt_3.2.bbappend
> > delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-
> yocto_3.0.bbappend
> > delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-
> yocto_3.2.bbappend
> > delete mode 100644
> > meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS index 5bcf470..3bf0add 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -56,10 +56,6 @@ EMENLOW
> > M: Tom Zanussi<tom.zanussi@intel.com>
> > F: meta-emenlow/
> >
> > -FISHRIVER
> > -M: Tom Zanussi<tom.zanussi@intel.com>
> > -F: meta-fishriver/
> > -
> > FRI2
> > M: Darren Hart<dvhart@linux.intel.com>
> > F: meta-fri2/
> > diff --git a/meta-fishriver/COPYING.MIT b/meta-fishriver/COPYING.MIT
> > deleted file mode 100644 index fb950dc..0000000
> > --- a/meta-fishriver/COPYING.MIT
> > +++ /dev/null
> > @@ -1,17 +0,0 @@
> > -Permission is hereby granted, free of charge, to any person obtaining
> > a copy -of this software and associated documentation files (the
> > "Software"), to deal -in the Software without restriction, including
> > without limitation the rights -to use, copy, modify, merge, publish,
> > distribute, sublicense, and/or sell -copies of the Software, and to
> > permit persons to whom the Software is -furnished to do so, subject to the
> following conditions:
> > -
> > -The above copyright notice and this permission notice shall be
> > included in -all copies or substantial portions of the Software.
> > -
> > -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> OF
> > MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND
> > NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT
> HOLDERS
> > BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN
> AN
> > ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR
> IN
> > CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN -
> THE SOFTWARE.
> > diff --git a/meta-fishriver/README b/meta-fishriver/README deleted
> > file mode 100644 index 1dd0a4c..0000000
> > --- a/meta-fishriver/README
> > +++ /dev/null
> > @@ -1,114 +0,0 @@
> > -This README file contains information on building the meta-fishriver
> > -BSP layer, and booting the images contained in the /binary directory.
> > -Please see the corresponding sections below for details.
> > -
> > -
> > -Dependencies
> > -============
> > -
> > -This layer depends on:
> > -
> > - URI: git://git.openembedded.org/bitbake
> > - branch: master
> > -
> > - URI: git://git.openembedded.org/openembedded-core
> > - layers: meta
> > - branch: master
> > -
> > - URI: git://git.yoctoproject.org/meta-intel
> > - layers: intel
> > - branch: master
> > -
> > -
> > -Patches
> > -=======
> > -
> > -Please submit any patches against this BSP to the Yocto mailing list
> > -(yocto@yoctoproject.org) and cc: the maintainer:
> > -
> > -Maintainer: Tom Zanussi<tom.zanussi@intel.com>
> > -
> > -Please see the meta-intel/MAINTAINERS file for more details.
> > -
> > -
> > -Table of Contents
> > -=================
> > -
> > - I. Building the meta-fishriver BSP layer
> > - II. Booting the images in /binary
> > -
> > -
> > -I. Building the meta-fishriver BSP layer
> > -========================================
> > -
> > -In order to build an image with BSP support for a given release, you
> > -need to download the corresponding BSP tarball from the 'Board
> > Support -Package (BSP) Downloads' page of the Yocto Project website.
> > -
> > -Having done that, and assuming you extracted the BSP tarball contents
> > -at the top-level of your yocto build tree, you can build a fishriver
> > -image by adding the location of the meta-fishriver layer to
> > -bblayers.conf, along with the meta-intel layer itself (to access
> > -common metadata shared between BSPs) e.g.:
> > -
> > - yocto/meta-intel \
> > - yocto/meta-intel/meta-fishriver \
> > -
> > -To enable the fishriver layer, add the fishriver MACHINE to local.conf:
> > -
> > - MACHINE ?= "fishriver"
> > -
> > -You should then be able to build a fishriver image as such:
> > -
> > - $ source oe-init-build-env
> > - $ bitbake core-image-sato
> > -
> > -At the end of a successful build, you should have a live image that
> > -you can boot from a USB flash drive (see instructions on how to do
> > -that below, in the section 'Booting the images from /binary').
> > -
> > -As an alternative to downloading the BSP tarball, you can also work
> > -directly from the meta-intel git repository. For each BSP in the
> > -'meta-intel' repository, there are multiple branches, one
> > -corresponding to each major release starting with 'laverne' (0.90),
> > in -addition to the latest code which tracks the current master (note
> > that -not all BSPs are present in every release). Instead of
> > extracting a -BSP tarball at the top level of your yocto build tree,
> > you can -equivalently check out the appropriate branch from the
> > meta-intel -repository at the same location.
> > -
> > -
> > -II. Booting the images in /binary
> > -=================================
> > -
> > -This BSP contains bootable live images, which can be used to directly
> > -boot Yocto off of a USB flash drive.
> > -
> > -Under Linux, insert a USB flash drive. Assuming the USB flash drive
> > -takes device /dev/sdf, use dd to copy the live image to it. For
> > -example:
> > -
> > -# dd if=core-image-sato-fishriver-20101207053738.hddimg of=/dev/sdf
> > -# sync -# eject /dev/sdf
> > -
> > -This should give you a bootable USB flash device. Insert the device
> > -into a bootable USB socket on the target, and power on. This should
> > -result in a system booted to the Sato graphical desktop.
> > -
> > -If you want a terminal, use the arrows at the top of the UI to move
> > to -different pages of available applications, one of which is named
> > -'Terminal'. Clicking that should give you a root terminal.
> > -
> > -If you want to ssh into the system, you can use the root terminal to
> > -ifconfig the IP address and use that to ssh in. The root password is
> > -empty, so to log in type 'root' for the user name and hit 'Enter' at
> > -the Password prompt: and you should be in.
> > -
> > -----
> > -
> > -If you find you're getting corrupt images on the USB (it doesn't show
> > -the syslinux boot: prompt, or the boot: prompt contains strange
> > -characters), try doing this first:
> > -
> > -# dd if=/dev/zero of=/dev/sdf bs=1M count=512 diff --git
> > a/meta-fishriver/README.sources b/meta-fishriver/README.sources
> > deleted file mode 100644 index 76180f1..0000000
> > --- a/meta-fishriver/README.sources
> > +++ /dev/null
> > @@ -1,17 +0,0 @@
> > -The sources for the packages comprising the images shipped with this
> > -BSP can be found at the following location:
> > -
> > -http://downloads.yoctoproject.org/mirror/sources/
> > -
> > -The metadata used to generate the images shipped with this BSP, in
> > -addition to the code contained in this BSP, can be found at the
> > -following location:
> > -
> > -http://www.yoctoproject.org/downloads/yocto-1.2/poky-denzil-7.0.tar.b
> > z2
> > -
> > -The metadata used to generate the images shipped with this BSP, in
> > -addition to the code contained in this BSP, can also be found at the
> > -following locations:
> > -
> > -git://git.yoctoproject.org/poky.git
> > -git://git.yoctoproject.org/meta-intel
> > diff --git a/meta-fishriver/binary/.gitignore
> > b/meta-fishriver/binary/.gitignore
> > deleted file mode 100644
> > index e69de29..0000000
> > diff --git a/meta-fishriver/conf/layer.conf
> > b/meta-fishriver/conf/layer.conf deleted file mode 100644 index
> > 61e292b..0000000
> > --- a/meta-fishriver/conf/layer.conf
> > +++ /dev/null
> > @@ -1,12 +0,0 @@
> > -# We have a conf and classes directory, add to BBPATH -BBPATH :=
> > "${BBPATH}:${LAYERDIR}"
> > -
> > -# We have a recipes directory, add to BBFILES -BBFILES := "${BBFILES}
> > ${LAYERDIR}/recipes-*/*/*.bb \
> > - ${LAYERDIR}/recipes-*/*/*.bbappend"
> > -
> > -BBFILE_COLLECTIONS += "fishriver"
> > -BBFILE_PATTERN_fishriver := "^${LAYERDIR}/"
> > -BBFILE_PRIORITY_fishriver = "6"
> > -
> > -LAYERDEPENDS_fishriver = "intel"
> > diff --git a/meta-fishriver/conf/machine/fishriver.conf
> > b/meta-fishriver/conf/machine/fishriver.conf
> > deleted file mode 100644
> > index ec2e87f..0000000
> > --- a/meta-fishriver/conf/machine/fishriver.conf
> > +++ /dev/null
> > @@ -1,17 +0,0 @@
> > -#@TYPE: Machine
> > -#@NAME: fishriver
> > -
> > -#@DESCRIPTION: Machine configuration for Fish River Island systems -#
> > i.e. Z530/E660 + EG20T
> > -
> > -PREFERRED_VERSION_linux-yocto ?= "3.4%"
> > -
> > -require conf/machine/include/tune-atom.inc
> > -require conf/machine/include/ia32-base.inc
> > -
> > -XSERVER ?= "${XSERVER_IA32_BASE} \
> > - ${XSERVER_IA32_EXT} \
> > - ${XSERVER_IA32_VESA} \
> > - "
> > -
> > -APPEND += "video=vesafb vga=0x318"
> > diff --git
> > a/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfi
> > g
> > b/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfi
> > g
> > deleted file mode 100644
> > index ffce012..0000000
> > ---
> > a/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfi
> > g
> > +++ /dev/null
> > @@ -1,3 +0,0 @@
> > -# Assume a USB mouse and keyboard are connected
> > -HAVE_TOUCHSCREEN=0
> > -HAVE_KEYBOARD=1
> > diff --git
> > a/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
> > b/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
> > deleted file mode 100644
> > index 54da0ff..0000000
> > --- a/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
> > +++ /dev/null
> > @@ -1,3 +0,0 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > -
> > -PRINC = "1"
> > diff --git
> > a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fis
> > hriver/xorg.conf
> > b/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fis
> > hriver/xorg.conf
> > deleted file mode 100644
> > index da4fc3c..0000000
> > ---
> > a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fis
> > hriver/xorg.conf
> > +++ /dev/null
> > @@ -1,26 +0,0 @@
> > -Section "Device"
> > - Identifier "Generic VESA"
> > - Driver "vesa"
> > -EndSection
> > -
> > -Section "Monitor"
> > - Identifier "Generic Monitor"
> > - Option "DPMS"
> > -EndSection
> > -
> > -Section "Screen"
> > - Identifier "Default Screen"
> > - Device "Generic VESA"
> > - Monitor "Generic Monitor"
> > - DefaultDepth 24
> > -EndSection
> > -
> > -Section "ServerLayout"
> > - Identifier "Default Layout"
> > - Screen "Default Screen"
> > -EndSection
> > -
> > -Section "ServerFlags"
> > - Option "DontZap" "0"
> > - Option "AutoAddDevices" "False"
> > -EndSection
> > diff --git
> > a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1
> > .bbappend
> > b/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1
> > .bbappend
> > deleted file mode 100644
> > index 72d991c..0000000
> > ---
> > a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1
> > .bbappend
> > +++ /dev/null
> > @@ -1 +0,0 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > diff --git
> > a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
> > b/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
> > deleted file mode 100644
> > index 7a502bd..0000000
> > --- a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
> > +++ /dev/null
> > @@ -1,8 +0,0 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > -COMPATIBLE_MACHINE_fishriver = "fishriver"
> > -KMACHINE_fishriver = "fishriver"
> > -
> > -# Update the following to use a different BSP branch or meta SRCREV
> > -#KBRANCH_fishriver = "yocto/standard/preempt-rt/base"
> > -#SRCREV_machine_pn-linux-yocto-rt_fishriver ?= XXXX
> > -#SRCREV_meta_pn-linux-yocto-rt_fishriver ?= XXXX diff --git
> > a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
> > b/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
> > deleted file mode 100644
> > index a91a425..0000000
> > --- a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
> > +++ /dev/null
> > @@ -1,8 +0,0 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > -COMPATIBLE_MACHINE_fishriver = "fishriver"
> > -KMACHINE_fishriver = "fishriver"
> > -
> > -# Update the following to use a different BSP branch or meta SRCREV
> > -#KBRANCH_fishriver = "standard/preempt-rt/base"
> > -#SRCREV_machine_pn-linux-yocto-rt_fishriver ?= XXXX
> > -#SRCREV_meta_pn-linux-yocto-rt_fishriver ?= XXXX diff --git
> > a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
> > b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
> > deleted file mode 100644
> > index 6ac6ef5..0000000
> > --- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
> > +++ /dev/null
> > @@ -1,9 +0,0 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > -
> > -COMPATIBLE_MACHINE_fishriver = "fishriver"
> > -KMACHINE_fishriver = "fishriver"
> > -KBRANCH_fishriver = "yocto/standard/fishriver"
> > -KERNEL_FEATURES_append_fishriver += " cfg/smp.scc"
> > -
> > -SRCREV_machine_pn-linux-yocto_fishriver ?=
> "c139592c96722727a9f074515a4061c3820da1a6"
> > -SRCREV_meta_pn-linux-yocto_fishriver ?=
> "59314a3523e360796419d76d78c6f7d8c5ef2593"
> > diff --git
> > a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
> > b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
> > deleted file mode 100644
> > index 9a2f678..0000000
> > --- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
> > +++ /dev/null
> > @@ -1,8 +0,0 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > -
> > -COMPATIBLE_MACHINE_fishriver = "fishriver"
> > -KMACHINE_fishriver = "fishriver"
> > -KBRANCH_fishriver = "standard/default/fishriver"
> > -
> > -SRCREV_machine_pn-linux-yocto_fishriver ?=
> "969edd015a46eed77d6c3daeffdc299dd06e3397"
> > -SRCREV_meta_pn-linux-yocto_fishriver ?=
> "5b4c9dc78b5ae607173cc3ddab9bce1b5f78129b"
> > diff --git
> > a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
> > b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
> > deleted file mode 100644
> > index c0d04dc..0000000
> > --- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
> > +++ /dev/null
> > @@ -1,8 +0,0 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > -
> > -COMPATIBLE_MACHINE_fishriver = "fishriver"
> > -KMACHINE_fishriver = "fishriver"
> > -KBRANCH_fishriver = "standard/fishriver"
> > -
> > -SRCREV_machine_pn-linux-yocto_fishriver ?=
> "3fa06aa29078fdb2af431de2d3fdae7d281ba85f"
> > -SRCREV_meta_pn-linux-yocto_fishriver ?=
> "5bdc655034a58a7147176a8a882d81e2fd51e4b9"
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 4/5] fishriver BSP retirement
2012-10-10 23:18 ` Kamble, Nitin A
@ 2012-10-10 23:26 ` Bruce Ashfield
0 siblings, 0 replies; 19+ messages in thread
From: Bruce Ashfield @ 2012-10-10 23:26 UTC (permalink / raw)
To: Kamble, Nitin A; +Cc: yocto, Hart, Darren
On 12-10-10 7:18 PM, Kamble, Nitin A wrote:
>
>
>> -----Original Message-----
>> From: Bruce Ashfield [mailto:bruce.ashfield@windriver.com]
>> Sent: Wednesday, October 10, 2012 2:07 PM
>> To: Kamble, Nitin A
>> Cc: Zanussi, Tom; Hart, Darren; yocto@yoctoproject.org
>> Subject: Re: [yocto] [PATCHv2 4/5] fishriver BSP retirement
>>
>> On 12-10-09 09:16 PM, nitin.a.kamble@intel.com wrote:
>>> From: Nitin A Kamble<nitin.a.kamble@intel.com>
>>>
>>> This commit removes fishriver bsp from meta-intel layer.
>>>
>>> Fish-River-Islnad-2 hardware and BSP has made this
>>> Fish-River-Island hardware and BSP absolute.
>>> Also we discussed this on the Yocto Execution Tracking Meeting, and
>>> to our knowledge no customer is using (cares about) this BSP now.
>>
>> Just so I don't forget, can you send a patch that also removes the kernel
>> meta data for the BSP ? That way I won't recreate the branch for future
>> releases :)
>>
> Removing the FRI-1 contents from meta branch of v3.4 kernel tree should be ok because it preserves the old commits.
> But I think we will have to leave the topic branch for fishriver machine as it is.
ok, works for me. We still do have the yocto-kernel-cache repository
to track the history, but for historical purposes, I agree that keeping
it in all the 3.x trees is ok, without the meta-intel support .. you can't
build it and it doesn't do any harm.
>
>> I assume it is ok that the kernel branches stay in the 3.x kernels for the yocto
>> 1.3 release ?
>>
> I also think that is the right way to handle it.
Fine with me as well, I'll just ensure that it doesn't appear in new
repos, a kernel meta commit patch against the 3.4 tree that says 3.6+
will make sure that happens.
Bruce
>
> Regards,
> Nitin
>
>
>> Cheers,
>>
>> Bruce
>>
>>>
>>> Signed-off-by: Nitin A Kamble<nitin.a.kamble@intel.com>
>>> ---
>>> MAINTAINERS | 4 -
>>> meta-fishriver/COPYING.MIT | 17 ---
>>> meta-fishriver/README | 114 --------------------
>>> meta-fishriver/README.sources | 17 ---
>>> meta-fishriver/conf/layer.conf | 12 --
>>> meta-fishriver/conf/machine/fishriver.conf | 17 ---
>>> .../formfactor/formfactor/fishriver/machconfig | 3 -
>>> .../recipes-bsp/formfactor/formfactor_0.0.bbappend | 3 -
>>> .../xserver-xf86-config/fishriver/xorg.conf | 26 -----
>>> .../xorg-xserver/xserver-xf86-config_0.1.bbappend | 1 -
>>> .../linux/linux-yocto-rt_3.0.bbappend | 8 --
>>> .../linux/linux-yocto-rt_3.2.bbappend | 8 --
>>> .../recipes-kernel/linux/linux-yocto_3.0.bbappend | 9 --
>>> .../recipes-kernel/linux/linux-yocto_3.2.bbappend | 8 --
>>> .../recipes-kernel/linux/linux-yocto_3.4.bbappend | 8 --
>>> 15 files changed, 0 insertions(+), 255 deletions(-)
>>> delete mode 100644 meta-fishriver/COPYING.MIT
>>> delete mode 100644 meta-fishriver/README
>>> delete mode 100644 meta-fishriver/README.sources
>>> delete mode 100644 meta-fishriver/binary/.gitignore
>>> delete mode 100644 meta-fishriver/conf/layer.conf
>>> delete mode 100644 meta-fishriver/conf/machine/fishriver.conf
>>> delete mode 100644 meta-fishriver/recipes-
>> bsp/formfactor/formfactor/fishriver/machconfig
>>> delete mode 100644 meta-fishriver/recipes-
>> bsp/formfactor/formfactor_0.0.bbappend
>>> delete mode 100644 meta-fishriver/recipes-graphics/xorg-
>> xserver/xserver-xf86-config/fishriver/xorg.conf
>>> delete mode 100644 meta-fishriver/recipes-graphics/xorg-
>> xserver/xserver-xf86-config_0.1.bbappend
>>> delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto-
>> rt_3.0.bbappend
>>> delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-yocto-
>> rt_3.2.bbappend
>>> delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-
>> yocto_3.0.bbappend
>>> delete mode 100644 meta-fishriver/recipes-kernel/linux/linux-
>> yocto_3.2.bbappend
>>> delete mode 100644
>>> meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS index 5bcf470..3bf0add 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -56,10 +56,6 @@ EMENLOW
>>> M: Tom Zanussi<tom.zanussi@intel.com>
>>> F: meta-emenlow/
>>>
>>> -FISHRIVER
>>> -M: Tom Zanussi<tom.zanussi@intel.com>
>>> -F: meta-fishriver/
>>> -
>>> FRI2
>>> M: Darren Hart<dvhart@linux.intel.com>
>>> F: meta-fri2/
>>> diff --git a/meta-fishriver/COPYING.MIT b/meta-fishriver/COPYING.MIT
>>> deleted file mode 100644 index fb950dc..0000000
>>> --- a/meta-fishriver/COPYING.MIT
>>> +++ /dev/null
>>> @@ -1,17 +0,0 @@
>>> -Permission is hereby granted, free of charge, to any person obtaining
>>> a copy -of this software and associated documentation files (the
>>> "Software"), to deal -in the Software without restriction, including
>>> without limitation the rights -to use, copy, modify, merge, publish,
>>> distribute, sublicense, and/or sell -copies of the Software, and to
>>> permit persons to whom the Software is -furnished to do so, subject to the
>> following conditions:
>>> -
>>> -The above copyright notice and this permission notice shall be
>>> included in -all copies or substantial portions of the Software.
>>> -
>>> -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>> EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> OF
>>> MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND
>>> NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT
>> HOLDERS
>>> BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN
>> AN
>>> ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR
>> IN
>>> CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN -
>> THE SOFTWARE.
>>> diff --git a/meta-fishriver/README b/meta-fishriver/README deleted
>>> file mode 100644 index 1dd0a4c..0000000
>>> --- a/meta-fishriver/README
>>> +++ /dev/null
>>> @@ -1,114 +0,0 @@
>>> -This README file contains information on building the meta-fishriver
>>> -BSP layer, and booting the images contained in the /binary directory.
>>> -Please see the corresponding sections below for details.
>>> -
>>> -
>>> -Dependencies
>>> -============
>>> -
>>> -This layer depends on:
>>> -
>>> - URI: git://git.openembedded.org/bitbake
>>> - branch: master
>>> -
>>> - URI: git://git.openembedded.org/openembedded-core
>>> - layers: meta
>>> - branch: master
>>> -
>>> - URI: git://git.yoctoproject.org/meta-intel
>>> - layers: intel
>>> - branch: master
>>> -
>>> -
>>> -Patches
>>> -=======
>>> -
>>> -Please submit any patches against this BSP to the Yocto mailing list
>>> -(yocto@yoctoproject.org) and cc: the maintainer:
>>> -
>>> -Maintainer: Tom Zanussi<tom.zanussi@intel.com>
>>> -
>>> -Please see the meta-intel/MAINTAINERS file for more details.
>>> -
>>> -
>>> -Table of Contents
>>> -=================
>>> -
>>> - I. Building the meta-fishriver BSP layer
>>> - II. Booting the images in /binary
>>> -
>>> -
>>> -I. Building the meta-fishriver BSP layer
>>> -========================================
>>> -
>>> -In order to build an image with BSP support for a given release, you
>>> -need to download the corresponding BSP tarball from the 'Board
>>> Support -Package (BSP) Downloads' page of the Yocto Project website.
>>> -
>>> -Having done that, and assuming you extracted the BSP tarball contents
>>> -at the top-level of your yocto build tree, you can build a fishriver
>>> -image by adding the location of the meta-fishriver layer to
>>> -bblayers.conf, along with the meta-intel layer itself (to access
>>> -common metadata shared between BSPs) e.g.:
>>> -
>>> - yocto/meta-intel \
>>> - yocto/meta-intel/meta-fishriver \
>>> -
>>> -To enable the fishriver layer, add the fishriver MACHINE to local.conf:
>>> -
>>> - MACHINE ?= "fishriver"
>>> -
>>> -You should then be able to build a fishriver image as such:
>>> -
>>> - $ source oe-init-build-env
>>> - $ bitbake core-image-sato
>>> -
>>> -At the end of a successful build, you should have a live image that
>>> -you can boot from a USB flash drive (see instructions on how to do
>>> -that below, in the section 'Booting the images from /binary').
>>> -
>>> -As an alternative to downloading the BSP tarball, you can also work
>>> -directly from the meta-intel git repository. For each BSP in the
>>> -'meta-intel' repository, there are multiple branches, one
>>> -corresponding to each major release starting with 'laverne' (0.90),
>>> in -addition to the latest code which tracks the current master (note
>>> that -not all BSPs are present in every release). Instead of
>>> extracting a -BSP tarball at the top level of your yocto build tree,
>>> you can -equivalently check out the appropriate branch from the
>>> meta-intel -repository at the same location.
>>> -
>>> -
>>> -II. Booting the images in /binary
>>> -=================================
>>> -
>>> -This BSP contains bootable live images, which can be used to directly
>>> -boot Yocto off of a USB flash drive.
>>> -
>>> -Under Linux, insert a USB flash drive. Assuming the USB flash drive
>>> -takes device /dev/sdf, use dd to copy the live image to it. For
>>> -example:
>>> -
>>> -# dd if=core-image-sato-fishriver-20101207053738.hddimg of=/dev/sdf
>>> -# sync -# eject /dev/sdf
>>> -
>>> -This should give you a bootable USB flash device. Insert the device
>>> -into a bootable USB socket on the target, and power on. This should
>>> -result in a system booted to the Sato graphical desktop.
>>> -
>>> -If you want a terminal, use the arrows at the top of the UI to move
>>> to -different pages of available applications, one of which is named
>>> -'Terminal'. Clicking that should give you a root terminal.
>>> -
>>> -If you want to ssh into the system, you can use the root terminal to
>>> -ifconfig the IP address and use that to ssh in. The root password is
>>> -empty, so to log in type 'root' for the user name and hit 'Enter' at
>>> -the Password prompt: and you should be in.
>>> -
>>> -----
>>> -
>>> -If you find you're getting corrupt images on the USB (it doesn't show
>>> -the syslinux boot: prompt, or the boot: prompt contains strange
>>> -characters), try doing this first:
>>> -
>>> -# dd if=/dev/zero of=/dev/sdf bs=1M count=512 diff --git
>>> a/meta-fishriver/README.sources b/meta-fishriver/README.sources
>>> deleted file mode 100644 index 76180f1..0000000
>>> --- a/meta-fishriver/README.sources
>>> +++ /dev/null
>>> @@ -1,17 +0,0 @@
>>> -The sources for the packages comprising the images shipped with this
>>> -BSP can be found at the following location:
>>> -
>>> -http://downloads.yoctoproject.org/mirror/sources/
>>> -
>>> -The metadata used to generate the images shipped with this BSP, in
>>> -addition to the code contained in this BSP, can be found at the
>>> -following location:
>>> -
>>> -http://www.yoctoproject.org/downloads/yocto-1.2/poky-denzil-7.0.tar.b
>>> z2
>>> -
>>> -The metadata used to generate the images shipped with this BSP, in
>>> -addition to the code contained in this BSP, can also be found at the
>>> -following locations:
>>> -
>>> -git://git.yoctoproject.org/poky.git
>>> -git://git.yoctoproject.org/meta-intel
>>> diff --git a/meta-fishriver/binary/.gitignore
>>> b/meta-fishriver/binary/.gitignore
>>> deleted file mode 100644
>>> index e69de29..0000000
>>> diff --git a/meta-fishriver/conf/layer.conf
>>> b/meta-fishriver/conf/layer.conf deleted file mode 100644 index
>>> 61e292b..0000000
>>> --- a/meta-fishriver/conf/layer.conf
>>> +++ /dev/null
>>> @@ -1,12 +0,0 @@
>>> -# We have a conf and classes directory, add to BBPATH -BBPATH :=
>>> "${BBPATH}:${LAYERDIR}"
>>> -
>>> -# We have a recipes directory, add to BBFILES -BBFILES := "${BBFILES}
>>> ${LAYERDIR}/recipes-*/*/*.bb \
>>> - ${LAYERDIR}/recipes-*/*/*.bbappend"
>>> -
>>> -BBFILE_COLLECTIONS += "fishriver"
>>> -BBFILE_PATTERN_fishriver := "^${LAYERDIR}/"
>>> -BBFILE_PRIORITY_fishriver = "6"
>>> -
>>> -LAYERDEPENDS_fishriver = "intel"
>>> diff --git a/meta-fishriver/conf/machine/fishriver.conf
>>> b/meta-fishriver/conf/machine/fishriver.conf
>>> deleted file mode 100644
>>> index ec2e87f..0000000
>>> --- a/meta-fishriver/conf/machine/fishriver.conf
>>> +++ /dev/null
>>> @@ -1,17 +0,0 @@
>>> -#@TYPE: Machine
>>> -#@NAME: fishriver
>>> -
>>> -#@DESCRIPTION: Machine configuration for Fish River Island systems -#
>>> i.e. Z530/E660 + EG20T
>>> -
>>> -PREFERRED_VERSION_linux-yocto ?= "3.4%"
>>> -
>>> -require conf/machine/include/tune-atom.inc
>>> -require conf/machine/include/ia32-base.inc
>>> -
>>> -XSERVER ?= "${XSERVER_IA32_BASE} \
>>> - ${XSERVER_IA32_EXT} \
>>> - ${XSERVER_IA32_VESA} \
>>> - "
>>> -
>>> -APPEND += "video=vesafb vga=0x318"
>>> diff --git
>>> a/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfi
>>> g
>>> b/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfi
>>> g
>>> deleted file mode 100644
>>> index ffce012..0000000
>>> ---
>>> a/meta-fishriver/recipes-bsp/formfactor/formfactor/fishriver/machconfi
>>> g
>>> +++ /dev/null
>>> @@ -1,3 +0,0 @@
>>> -# Assume a USB mouse and keyboard are connected
>>> -HAVE_TOUCHSCREEN=0
>>> -HAVE_KEYBOARD=1
>>> diff --git
>>> a/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
>>> b/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
>>> deleted file mode 100644
>>> index 54da0ff..0000000
>>> --- a/meta-fishriver/recipes-bsp/formfactor/formfactor_0.0.bbappend
>>> +++ /dev/null
>>> @@ -1,3 +0,0 @@
>>> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>>> -
>>> -PRINC = "1"
>>> diff --git
>>> a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fis
>>> hriver/xorg.conf
>>> b/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fis
>>> hriver/xorg.conf
>>> deleted file mode 100644
>>> index da4fc3c..0000000
>>> ---
>>> a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config/fis
>>> hriver/xorg.conf
>>> +++ /dev/null
>>> @@ -1,26 +0,0 @@
>>> -Section "Device"
>>> - Identifier "Generic VESA"
>>> - Driver "vesa"
>>> -EndSection
>>> -
>>> -Section "Monitor"
>>> - Identifier "Generic Monitor"
>>> - Option "DPMS"
>>> -EndSection
>>> -
>>> -Section "Screen"
>>> - Identifier "Default Screen"
>>> - Device "Generic VESA"
>>> - Monitor "Generic Monitor"
>>> - DefaultDepth 24
>>> -EndSection
>>> -
>>> -Section "ServerLayout"
>>> - Identifier "Default Layout"
>>> - Screen "Default Screen"
>>> -EndSection
>>> -
>>> -Section "ServerFlags"
>>> - Option "DontZap" "0"
>>> - Option "AutoAddDevices" "False"
>>> -EndSection
>>> diff --git
>>> a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1
>>> .bbappend
>>> b/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1
>>> .bbappend
>>> deleted file mode 100644
>>> index 72d991c..0000000
>>> ---
>>> a/meta-fishriver/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1
>>> .bbappend
>>> +++ /dev/null
>>> @@ -1 +0,0 @@
>>> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>>> diff --git
>>> a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
>>> b/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
>>> deleted file mode 100644
>>> index 7a502bd..0000000
>>> --- a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend
>>> +++ /dev/null
>>> @@ -1,8 +0,0 @@
>>> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>>> -COMPATIBLE_MACHINE_fishriver = "fishriver"
>>> -KMACHINE_fishriver = "fishriver"
>>> -
>>> -# Update the following to use a different BSP branch or meta SRCREV
>>> -#KBRANCH_fishriver = "yocto/standard/preempt-rt/base"
>>> -#SRCREV_machine_pn-linux-yocto-rt_fishriver ?= XXXX
>>> -#SRCREV_meta_pn-linux-yocto-rt_fishriver ?= XXXX diff --git
>>> a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
>>> b/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
>>> deleted file mode 100644
>>> index a91a425..0000000
>>> --- a/meta-fishriver/recipes-kernel/linux/linux-yocto-rt_3.2.bbappend
>>> +++ /dev/null
>>> @@ -1,8 +0,0 @@
>>> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>>> -COMPATIBLE_MACHINE_fishriver = "fishriver"
>>> -KMACHINE_fishriver = "fishriver"
>>> -
>>> -# Update the following to use a different BSP branch or meta SRCREV
>>> -#KBRANCH_fishriver = "standard/preempt-rt/base"
>>> -#SRCREV_machine_pn-linux-yocto-rt_fishriver ?= XXXX
>>> -#SRCREV_meta_pn-linux-yocto-rt_fishriver ?= XXXX diff --git
>>> a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
>>> b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
>>> deleted file mode 100644
>>> index 6ac6ef5..0000000
>>> --- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.0.bbappend
>>> +++ /dev/null
>>> @@ -1,9 +0,0 @@
>>> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>>> -
>>> -COMPATIBLE_MACHINE_fishriver = "fishriver"
>>> -KMACHINE_fishriver = "fishriver"
>>> -KBRANCH_fishriver = "yocto/standard/fishriver"
>>> -KERNEL_FEATURES_append_fishriver += " cfg/smp.scc"
>>> -
>>> -SRCREV_machine_pn-linux-yocto_fishriver ?=
>> "c139592c96722727a9f074515a4061c3820da1a6"
>>> -SRCREV_meta_pn-linux-yocto_fishriver ?=
>> "59314a3523e360796419d76d78c6f7d8c5ef2593"
>>> diff --git
>>> a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
>>> b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
>>> deleted file mode 100644
>>> index 9a2f678..0000000
>>> --- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.2.bbappend
>>> +++ /dev/null
>>> @@ -1,8 +0,0 @@
>>> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>>> -
>>> -COMPATIBLE_MACHINE_fishriver = "fishriver"
>>> -KMACHINE_fishriver = "fishriver"
>>> -KBRANCH_fishriver = "standard/default/fishriver"
>>> -
>>> -SRCREV_machine_pn-linux-yocto_fishriver ?=
>> "969edd015a46eed77d6c3daeffdc299dd06e3397"
>>> -SRCREV_meta_pn-linux-yocto_fishriver ?=
>> "5b4c9dc78b5ae607173cc3ddab9bce1b5f78129b"
>>> diff --git
>>> a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
>>> b/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
>>> deleted file mode 100644
>>> index c0d04dc..0000000
>>> --- a/meta-fishriver/recipes-kernel/linux/linux-yocto_3.4.bbappend
>>> +++ /dev/null
>>> @@ -1,8 +0,0 @@
>>> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>>> -
>>> -COMPATIBLE_MACHINE_fishriver = "fishriver"
>>> -KMACHINE_fishriver = "fishriver"
>>> -KBRANCH_fishriver = "standard/fishriver"
>>> -
>>> -SRCREV_machine_pn-linux-yocto_fishriver ?=
>> "3fa06aa29078fdb2af431de2d3fdae7d281ba85f"
>>> -SRCREV_meta_pn-linux-yocto_fishriver ?=
>> "5bdc655034a58a7147176a8a882d81e2fd51e4b9"
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCHv2 2/5] crownbay.conf: specify the 8.0.4 version as preferred version of mesa-dri
2012-10-10 23:14 ` Kamble, Nitin A
@ 2012-10-11 10:28 ` Burton, Ross
0 siblings, 0 replies; 19+ messages in thread
From: Burton, Ross @ 2012-10-11 10:28 UTC (permalink / raw)
To: Kamble, Nitin A; +Cc: yocto, Hart, Darren
On 11 October 2012 00:14, Kamble, Nitin A <nitin.a.kamble@intel.com> wrote:
> The reason is we want to know if the version of mesa in oecore has changed or not. EMGD has specific needs of mesa, and in the testing we are not finding any issues with v8.0.4 of mesa. But that may not hold true for future versions of mesa, so we would like to pin the version here so we know that this version works as expected.
That's an excellent reason.
Ross
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2012-10-11 10:28 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-10-10 1:16 [PATCHv2 0/5] misc meta-intel commits nitin.a.kamble
2012-10-10 1:16 ` [PATCHv2 1/5] xf86-video-intel: Bring 2.20.0 version to match released graphics stack nitin.a.kamble
2012-10-10 2:43 ` Darren Hart
2012-10-10 9:23 ` Burton, Ross
2012-10-10 1:16 ` [PATCHv2 2/5] crownbay.conf: specify the 8.0.4 version as preferred version of mesa-dri nitin.a.kamble
2012-10-10 2:45 ` Darren Hart
2012-10-10 9:25 ` Burton, Ross
2012-10-10 23:14 ` Kamble, Nitin A
2012-10-11 10:28 ` Burton, Ross
2012-10-10 1:16 ` [PATCHv2 3/5] emgd-driver_bin_1.10: Remove in favor of 1.14 nitin.a.kamble
2012-10-10 2:45 ` Darren Hart
2012-10-10 1:16 ` [PATCHv2 4/5] fishriver BSP retirement nitin.a.kamble
2012-10-10 2:42 ` Darren Hart
2012-10-10 2:50 ` Kamble, Nitin A
2012-10-10 3:07 ` Darren Hart
2012-10-10 21:06 ` Bruce Ashfield
2012-10-10 23:18 ` Kamble, Nitin A
2012-10-10 23:26 ` Bruce Ashfield
2012-10-10 1:16 ` [PATCHv2 5/5] update maintainers of various BSPs nitin.a.kamble
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.