* [PATCH 00/11] Add basic code support for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: devicetree, kernel, daniel.lezcano, linux-gpio, p.zabel, fabio.estevam, tglx, linux-clk, linux-arm-kernel, ping.bai The i.MX 6SoloLiteLite application processors are NXP's latest additions to a growing family of multimedia-focused products offering high-performance processing optimized for lowest power consumption. The i.MX 6SoloLiteLite processors feature NXP's advanced implementation of the ARM Cortex-A9 core, which can be interfaced with LPDDR3 and LPDDR2 DRAM memory devices. i.MX6SLL is a new SOC of the i.MX6 family, shares many common modules, so most of the MSL code can be resued from i.MX6 serious SOC. Bai Ping (11): ARM: imx: Add basic msl support for imx6sll driver: clocksource: add gpt timer for imx6sll driver: clk: imx: Add clock driver for imx6sll driver: pinctrl: imx: Add pinctrl driver support for imx6sll ARM: dts: imx: Add basic dtsi for imx6sll ARM: dts: imx: Add imx6sll EVK board dts support ARM: debug: Add low level debug support for imx6sll ARM: imx: Add suspend/resume support for imx6sll ARM: imx: correct i.mx6sll dram io low power mode Document: dt: binding: imx: update doc for imx6sll ARM: configs: enable imx6sll support in defconfig .../devicetree/bindings/clock/imx6sll-clock.txt | 13 + .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 + arch/arm/Kconfig.debug | 9 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6sll-evk.dts | 652 +++++++++++++++ arch/arm/boot/dts/imx6sll-pinfunc.h | 882 +++++++++++++++++++++ arch/arm/boot/dts/imx6sll.dtsi | 854 ++++++++++++++++++++ arch/arm/configs/imx_v6_v7_defconfig | 1 + arch/arm/include/debug/imx-uart.h | 10 + arch/arm/mach-imx/Kconfig | 8 + arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/cpu.c | 3 + arch/arm/mach-imx/cpuidle-imx6sl.c | 7 +- arch/arm/mach-imx/gpc.c | 8 + arch/arm/mach-imx/mach-imx6sl.c | 10 +- arch/arm/mach-imx/mxc.h | 6 + arch/arm/mach-imx/pm-imx6.c | 49 +- arch/arm/mach-imx/suspend-imx6.S | 29 +- drivers/clk/imx/Makefile | 1 + drivers/clk/imx/clk-imx6sll.c | 366 +++++++++ drivers/clocksource/timer-imx-gpt.c | 1 + drivers/pinctrl/freescale/Kconfig | 7 + drivers/pinctrl/freescale/Makefile | 1 + drivers/pinctrl/freescale/pinctrl-imx6sll.c | 385 +++++++++ include/dt-bindings/clock/imx6sll-clock.h | 204 +++++ 25 files changed, 3514 insertions(+), 32 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt create mode 100644 arch/arm/boot/dts/imx6sll-evk.dts create mode 100644 arch/arm/boot/dts/imx6sll-pinfunc.h create mode 100644 arch/arm/boot/dts/imx6sll.dtsi create mode 100644 drivers/clk/imx/clk-imx6sll.c create mode 100644 drivers/pinctrl/freescale/pinctrl-imx6sll.c create mode 100644 include/dt-bindings/clock/imx6sll-clock.h -- 1.9.1 ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 00/11] Add basic code support for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: linux-arm-kernel The i.MX 6SoloLiteLite application processors are NXP's latest additions to a growing family of multimedia-focused products offering high-performance processing optimized for lowest power consumption. The i.MX 6SoloLiteLite processors feature NXP's advanced implementation of the ARM Cortex-A9 core, which can be interfaced with LPDDR3 and LPDDR2 DRAM memory devices. i.MX6SLL is a new SOC of the i.MX6 family, shares many common modules, so most of the MSL code can be resued from i.MX6 serious SOC. Bai Ping (11): ARM: imx: Add basic msl support for imx6sll driver: clocksource: add gpt timer for imx6sll driver: clk: imx: Add clock driver for imx6sll driver: pinctrl: imx: Add pinctrl driver support for imx6sll ARM: dts: imx: Add basic dtsi for imx6sll ARM: dts: imx: Add imx6sll EVK board dts support ARM: debug: Add low level debug support for imx6sll ARM: imx: Add suspend/resume support for imx6sll ARM: imx: correct i.mx6sll dram io low power mode Document: dt: binding: imx: update doc for imx6sll ARM: configs: enable imx6sll support in defconfig .../devicetree/bindings/clock/imx6sll-clock.txt | 13 + .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 + arch/arm/Kconfig.debug | 9 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6sll-evk.dts | 652 +++++++++++++++ arch/arm/boot/dts/imx6sll-pinfunc.h | 882 +++++++++++++++++++++ arch/arm/boot/dts/imx6sll.dtsi | 854 ++++++++++++++++++++ arch/arm/configs/imx_v6_v7_defconfig | 1 + arch/arm/include/debug/imx-uart.h | 10 + arch/arm/mach-imx/Kconfig | 8 + arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/cpu.c | 3 + arch/arm/mach-imx/cpuidle-imx6sl.c | 7 +- arch/arm/mach-imx/gpc.c | 8 + arch/arm/mach-imx/mach-imx6sl.c | 10 +- arch/arm/mach-imx/mxc.h | 6 + arch/arm/mach-imx/pm-imx6.c | 49 +- arch/arm/mach-imx/suspend-imx6.S | 29 +- drivers/clk/imx/Makefile | 1 + drivers/clk/imx/clk-imx6sll.c | 366 +++++++++ drivers/clocksource/timer-imx-gpt.c | 1 + drivers/pinctrl/freescale/Kconfig | 7 + drivers/pinctrl/freescale/Makefile | 1 + drivers/pinctrl/freescale/pinctrl-imx6sll.c | 385 +++++++++ include/dt-bindings/clock/imx6sll-clock.h | 204 +++++ 25 files changed, 3514 insertions(+), 32 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt create mode 100644 arch/arm/boot/dts/imx6sll-evk.dts create mode 100644 arch/arm/boot/dts/imx6sll-pinfunc.h create mode 100644 arch/arm/boot/dts/imx6sll.dtsi create mode 100644 drivers/clk/imx/clk-imx6sll.c create mode 100644 drivers/pinctrl/freescale/pinctrl-imx6sll.c create mode 100644 include/dt-bindings/clock/imx6sll-clock.h -- 1.9.1 ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 00/11] Add basic code support for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai The i.MX 6SoloLiteLite application processors are NXP's latest additions to a growing family of multimedia-focused products offering high-performance processing optimized for lowest power consumption. The i.MX 6SoloLiteLite processors feature NXP's advanced implementation of the ARM Cortex-A9 core, which can be interfaced with LPDDR3 and LPDDR2 DRAM memory devices. i.MX6SLL is a new SOC of the i.MX6 family, shares many common modules, so most of the MSL code can be resued from i.MX6 serious SOC. Bai Ping (11): ARM: imx: Add basic msl support for imx6sll driver: clocksource: add gpt timer for imx6sll driver: clk: imx: Add clock driver for imx6sll driver: pinctrl: imx: Add pinctrl driver support for imx6sll ARM: dts: imx: Add basic dtsi for imx6sll ARM: dts: imx: Add imx6sll EVK board dts support ARM: debug: Add low level debug support for imx6sll ARM: imx: Add suspend/resume support for imx6sll ARM: imx: correct i.mx6sll dram io low power mode Document: dt: binding: imx: update doc for imx6sll ARM: configs: enable imx6sll support in defconfig .../devicetree/bindings/clock/imx6sll-clock.txt | 13 + .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 + arch/arm/Kconfig.debug | 9 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6sll-evk.dts | 652 +++++++++++++++ arch/arm/boot/dts/imx6sll-pinfunc.h | 882 +++++++++++++++++++++ arch/arm/boot/dts/imx6sll.dtsi | 854 ++++++++++++++++++++ arch/arm/configs/imx_v6_v7_defconfig | 1 + arch/arm/include/debug/imx-uart.h | 10 + arch/arm/mach-imx/Kconfig | 8 + arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/cpu.c | 3 + arch/arm/mach-imx/cpuidle-imx6sl.c | 7 +- arch/arm/mach-imx/gpc.c | 8 + arch/arm/mach-imx/mach-imx6sl.c | 10 +- arch/arm/mach-imx/mxc.h | 6 + arch/arm/mach-imx/pm-imx6.c | 49 +- arch/arm/mach-imx/suspend-imx6.S | 29 +- drivers/clk/imx/Makefile | 1 + drivers/clk/imx/clk-imx6sll.c | 366 +++++++++ drivers/clocksource/timer-imx-gpt.c | 1 + drivers/pinctrl/freescale/Kconfig | 7 + drivers/pinctrl/freescale/Makefile | 1 + drivers/pinctrl/freescale/pinctrl-imx6sll.c | 385 +++++++++ include/dt-bindings/clock/imx6sll-clock.h | 204 +++++ 25 files changed, 3514 insertions(+), 32 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt create mode 100644 arch/arm/boot/dts/imx6sll-evk.dts create mode 100644 arch/arm/boot/dts/imx6sll-pinfunc.h create mode 100644 arch/arm/boot/dts/imx6sll.dtsi create mode 100644 drivers/clk/imx/clk-imx6sll.c create mode 100644 drivers/pinctrl/freescale/pinctrl-imx6sll.c create mode 100644 include/dt-bindings/clock/imx6sll-clock.h -- 1.9.1 ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 01/11] ARM: imx: Add basic msl support for imx6sll 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-02 6:39 ` Bai Ping -1 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: devicetree, kernel, daniel.lezcano, linux-gpio, p.zabel, fabio.estevam, tglx, linux-clk, linux-arm-kernel, ping.bai Add basic MSL support for i.MX6SLL. The i.MX 6SoloLiteLite application processors are NXP's latest additions to a growing family of multimedia-focused products offering high-performance processing optimized for lowest power consumption. The i.MX 6SoloLiteLite processors feature NXP's advanced implementation of the ARM Cortex-A9 core, which can be interfaced with LPDDR3 and LPDDR2 DRAM memory devices. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/Kconfig | 7 +++++++ arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/cpu.c | 3 +++ arch/arm/mach-imx/cpuidle-imx6sl.c | 7 +++++-- arch/arm/mach-imx/gpc.c | 8 ++++++++ arch/arm/mach-imx/mach-imx6sl.c | 10 ++++++++-- arch/arm/mach-imx/mxc.h | 6 ++++++ 7 files changed, 38 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 936c59d..33bcfda 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -512,6 +512,13 @@ config SOC_IMX6SL help This enables support for Freescale i.MX6 SoloLite processor. +config SOC_IMX6SLL + bool "i.MX6 SoloLiteLite support" + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloLiteLite processor. + config SOC_IMX6SX bool "i.MX6 SoloX support" select PINCTRL_IMX6SX diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index cab1289..f2bf650 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -77,6 +77,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o endif obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o +obj-$(CONFIG_SOC_IMX6SLL) += mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index b3347d3..62e8c0f 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -131,6 +131,9 @@ struct device * __init imx_soc_device_init(void) case MXC_CPU_IMX6UL: soc_id = "i.MX6UL"; break; + case MXC_CPU_IMX6SLL: + soc_id = "i.MX6SLL"; + break; case MXC_CPU_IMX7D: soc_id = "i.MX7D"; break; diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index 8d866fb..124f982 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -11,6 +11,7 @@ #include <asm/cpuidle.h> #include "common.h" +#include "hardware.h" #include "cpuidle.h" static int imx6sl_enter_wait(struct cpuidle_device *dev, @@ -21,9 +22,11 @@ static int imx6sl_enter_wait(struct cpuidle_device *dev, * Software workaround for ERR005311, see function * description for details. */ - imx6sl_set_wait_clk(true); + if (cpu_is_imx6sl()) + imx6sl_set_wait_clk(true); cpu_do_idle(); - imx6sl_set_wait_clk(false); + if (cpu_is_imx6sl()) + imx6sl_set_wait_clk(false); imx6_set_lpm(WAIT_CLOCKED); return index; diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 1dc2a34..4ed8a63 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -26,6 +26,7 @@ #include "hardware.h" #define GPC_CNTR 0x000 +#define GPC_CNTR_L2_PGE 22 #define GPC_IMR1 0x008 #define GPC_PGC_GPU_PDN 0x260 #define GPC_PGC_GPU_PUPSCR 0x264 @@ -243,6 +244,7 @@ static int __init imx_gpc_init(struct device_node *node, { struct irq_domain *parent_domain, *domain; int i; + u32 val; if (!parent) { pr_err("%s: no parent, giving up\n", node->full_name); @@ -271,6 +273,12 @@ static int __init imx_gpc_init(struct device_node *node, for (i = 0; i < IMR_NUM; i++) writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4); + /* clear the L2_PGE bit on i.MX6SLL */ + if (cpu_is_imx6sll()) { + val = readl_relaxed(gpc_base + GPC_CNTR); + val &= ~(1 << GPC_CNTR_L2_PGE); + writel_relaxed(val, gpc_base + GPC_CNTR); + } /* * Clear the OF_POPULATED flag set in of_irq_init so that * later the GPC power domain driver will not be skipped. diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 0408490..462ed9c 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -17,6 +17,7 @@ #include <asm/mach/map.h> #include "common.h" +#include "hardware.h" #include "cpuidle.h" static void __init imx6sl_fec_init(void) @@ -54,7 +55,8 @@ static void __init imx6sl_init_machine(void) of_platform_default_populate(NULL, NULL, parent); - imx6sl_fec_init(); + if (cpu_is_imx6sl()) + imx6sl_fec_init(); imx_anatop_init(); imx6sl_pm_init(); } @@ -66,11 +68,15 @@ static void __init imx6sl_init_irq(void) imx_init_l2cache(); imx_src_init(); irqchip_init(); - imx6_pm_ccm_init("fsl,imx6sl-ccm"); + if (cpu_is_imx6sl()) + imx6_pm_ccm_init("fsl,imx6sl-ccm"); + else + imx6_pm_ccm_init("fsl,imx6sll-ccm"); } static const char * const imx6sl_dt_compat[] __initconst = { "fsl,imx6sl", + "fsl,imx6sll", NULL, }; diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 34f2ff6..e047611 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -39,6 +39,7 @@ #define MXC_CPU_IMX6SX 0x62 #define MXC_CPU_IMX6Q 0x63 #define MXC_CPU_IMX6UL 0x64 +#define MXC_CPU_IMX6SLL 0x67 #define MXC_CPU_IMX7D 0x72 #define IMX_DDR_TYPE_LPDDR2 1 @@ -73,6 +74,11 @@ static inline bool cpu_is_imx6ul(void) return __mxc_cpu_type == MXC_CPU_IMX6UL; } +static inline bool cpu_is_imx6sll(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SLL; +} + static inline bool cpu_is_imx6q(void) { return __mxc_cpu_type == MXC_CPU_IMX6Q; -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 01/11] ARM: imx: Add basic msl support for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: linux-arm-kernel Add basic MSL support for i.MX6SLL. The i.MX 6SoloLiteLite application processors are NXP's latest additions to a growing family of multimedia-focused products offering high-performance processing optimized for lowest power consumption. The i.MX 6SoloLiteLite processors feature NXP's advanced implementation of the ARM Cortex-A9 core, which can be interfaced with LPDDR3 and LPDDR2 DRAM memory devices. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/Kconfig | 7 +++++++ arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/cpu.c | 3 +++ arch/arm/mach-imx/cpuidle-imx6sl.c | 7 +++++-- arch/arm/mach-imx/gpc.c | 8 ++++++++ arch/arm/mach-imx/mach-imx6sl.c | 10 ++++++++-- arch/arm/mach-imx/mxc.h | 6 ++++++ 7 files changed, 38 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 936c59d..33bcfda 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -512,6 +512,13 @@ config SOC_IMX6SL help This enables support for Freescale i.MX6 SoloLite processor. +config SOC_IMX6SLL + bool "i.MX6 SoloLiteLite support" + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloLiteLite processor. + config SOC_IMX6SX bool "i.MX6 SoloX support" select PINCTRL_IMX6SX diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index cab1289..f2bf650 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -77,6 +77,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o endif obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o +obj-$(CONFIG_SOC_IMX6SLL) += mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index b3347d3..62e8c0f 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -131,6 +131,9 @@ struct device * __init imx_soc_device_init(void) case MXC_CPU_IMX6UL: soc_id = "i.MX6UL"; break; + case MXC_CPU_IMX6SLL: + soc_id = "i.MX6SLL"; + break; case MXC_CPU_IMX7D: soc_id = "i.MX7D"; break; diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index 8d866fb..124f982 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -11,6 +11,7 @@ #include <asm/cpuidle.h> #include "common.h" +#include "hardware.h" #include "cpuidle.h" static int imx6sl_enter_wait(struct cpuidle_device *dev, @@ -21,9 +22,11 @@ static int imx6sl_enter_wait(struct cpuidle_device *dev, * Software workaround for ERR005311, see function * description for details. */ - imx6sl_set_wait_clk(true); + if (cpu_is_imx6sl()) + imx6sl_set_wait_clk(true); cpu_do_idle(); - imx6sl_set_wait_clk(false); + if (cpu_is_imx6sl()) + imx6sl_set_wait_clk(false); imx6_set_lpm(WAIT_CLOCKED); return index; diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 1dc2a34..4ed8a63 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -26,6 +26,7 @@ #include "hardware.h" #define GPC_CNTR 0x000 +#define GPC_CNTR_L2_PGE 22 #define GPC_IMR1 0x008 #define GPC_PGC_GPU_PDN 0x260 #define GPC_PGC_GPU_PUPSCR 0x264 @@ -243,6 +244,7 @@ static int __init imx_gpc_init(struct device_node *node, { struct irq_domain *parent_domain, *domain; int i; + u32 val; if (!parent) { pr_err("%s: no parent, giving up\n", node->full_name); @@ -271,6 +273,12 @@ static int __init imx_gpc_init(struct device_node *node, for (i = 0; i < IMR_NUM; i++) writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4); + /* clear the L2_PGE bit on i.MX6SLL */ + if (cpu_is_imx6sll()) { + val = readl_relaxed(gpc_base + GPC_CNTR); + val &= ~(1 << GPC_CNTR_L2_PGE); + writel_relaxed(val, gpc_base + GPC_CNTR); + } /* * Clear the OF_POPULATED flag set in of_irq_init so that * later the GPC power domain driver will not be skipped. diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 0408490..462ed9c 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -17,6 +17,7 @@ #include <asm/mach/map.h> #include "common.h" +#include "hardware.h" #include "cpuidle.h" static void __init imx6sl_fec_init(void) @@ -54,7 +55,8 @@ static void __init imx6sl_init_machine(void) of_platform_default_populate(NULL, NULL, parent); - imx6sl_fec_init(); + if (cpu_is_imx6sl()) + imx6sl_fec_init(); imx_anatop_init(); imx6sl_pm_init(); } @@ -66,11 +68,15 @@ static void __init imx6sl_init_irq(void) imx_init_l2cache(); imx_src_init(); irqchip_init(); - imx6_pm_ccm_init("fsl,imx6sl-ccm"); + if (cpu_is_imx6sl()) + imx6_pm_ccm_init("fsl,imx6sl-ccm"); + else + imx6_pm_ccm_init("fsl,imx6sll-ccm"); } static const char * const imx6sl_dt_compat[] __initconst = { "fsl,imx6sl", + "fsl,imx6sll", NULL, }; diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 34f2ff6..e047611 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -39,6 +39,7 @@ #define MXC_CPU_IMX6SX 0x62 #define MXC_CPU_IMX6Q 0x63 #define MXC_CPU_IMX6UL 0x64 +#define MXC_CPU_IMX6SLL 0x67 #define MXC_CPU_IMX7D 0x72 #define IMX_DDR_TYPE_LPDDR2 1 @@ -73,6 +74,11 @@ static inline bool cpu_is_imx6ul(void) return __mxc_cpu_type == MXC_CPU_IMX6UL; } +static inline bool cpu_is_imx6sll(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SLL; +} + static inline bool cpu_is_imx6q(void) { return __mxc_cpu_type == MXC_CPU_IMX6Q; -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 01/11] ARM: imx: Add basic msl support for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Add basic MSL support for i.MX6SLL. The i.MX 6SoloLiteLite application processors are NXP's latest additions to a growing family of multimedia-focused products offering high-performance processing optimized for lowest power consumption. The i.MX 6SoloLiteLite processors feature NXP's advanced implementation of the ARM Cortex-A9 core, which can be interfaced with LPDDR3 and LPDDR2 DRAM memory devices. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/Kconfig | 7 +++++++ arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/cpu.c | 3 +++ arch/arm/mach-imx/cpuidle-imx6sl.c | 7 +++++-- arch/arm/mach-imx/gpc.c | 8 ++++++++ arch/arm/mach-imx/mach-imx6sl.c | 10 ++++++++-- arch/arm/mach-imx/mxc.h | 6 ++++++ 7 files changed, 38 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 936c59d..33bcfda 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -512,6 +512,13 @@ config SOC_IMX6SL help This enables support for Freescale i.MX6 SoloLite processor. +config SOC_IMX6SLL + bool "i.MX6 SoloLiteLite support" + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloLiteLite processor. + config SOC_IMX6SX bool "i.MX6 SoloX support" select PINCTRL_IMX6SX diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index cab1289..f2bf650 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -77,6 +77,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o endif obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o +obj-$(CONFIG_SOC_IMX6SLL) += mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index b3347d3..62e8c0f 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -131,6 +131,9 @@ struct device * __init imx_soc_device_init(void) case MXC_CPU_IMX6UL: soc_id = "i.MX6UL"; break; + case MXC_CPU_IMX6SLL: + soc_id = "i.MX6SLL"; + break; case MXC_CPU_IMX7D: soc_id = "i.MX7D"; break; diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index 8d866fb..124f982 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -11,6 +11,7 @@ #include <asm/cpuidle.h> #include "common.h" +#include "hardware.h" #include "cpuidle.h" static int imx6sl_enter_wait(struct cpuidle_device *dev, @@ -21,9 +22,11 @@ static int imx6sl_enter_wait(struct cpuidle_device *dev, * Software workaround for ERR005311, see function * description for details. */ - imx6sl_set_wait_clk(true); + if (cpu_is_imx6sl()) + imx6sl_set_wait_clk(true); cpu_do_idle(); - imx6sl_set_wait_clk(false); + if (cpu_is_imx6sl()) + imx6sl_set_wait_clk(false); imx6_set_lpm(WAIT_CLOCKED); return index; diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 1dc2a34..4ed8a63 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -26,6 +26,7 @@ #include "hardware.h" #define GPC_CNTR 0x000 +#define GPC_CNTR_L2_PGE 22 #define GPC_IMR1 0x008 #define GPC_PGC_GPU_PDN 0x260 #define GPC_PGC_GPU_PUPSCR 0x264 @@ -243,6 +244,7 @@ static int __init imx_gpc_init(struct device_node *node, { struct irq_domain *parent_domain, *domain; int i; + u32 val; if (!parent) { pr_err("%s: no parent, giving up\n", node->full_name); @@ -271,6 +273,12 @@ static int __init imx_gpc_init(struct device_node *node, for (i = 0; i < IMR_NUM; i++) writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4); + /* clear the L2_PGE bit on i.MX6SLL */ + if (cpu_is_imx6sll()) { + val = readl_relaxed(gpc_base + GPC_CNTR); + val &= ~(1 << GPC_CNTR_L2_PGE); + writel_relaxed(val, gpc_base + GPC_CNTR); + } /* * Clear the OF_POPULATED flag set in of_irq_init so that * later the GPC power domain driver will not be skipped. diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 0408490..462ed9c 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -17,6 +17,7 @@ #include <asm/mach/map.h> #include "common.h" +#include "hardware.h" #include "cpuidle.h" static void __init imx6sl_fec_init(void) @@ -54,7 +55,8 @@ static void __init imx6sl_init_machine(void) of_platform_default_populate(NULL, NULL, parent); - imx6sl_fec_init(); + if (cpu_is_imx6sl()) + imx6sl_fec_init(); imx_anatop_init(); imx6sl_pm_init(); } @@ -66,11 +68,15 @@ static void __init imx6sl_init_irq(void) imx_init_l2cache(); imx_src_init(); irqchip_init(); - imx6_pm_ccm_init("fsl,imx6sl-ccm"); + if (cpu_is_imx6sl()) + imx6_pm_ccm_init("fsl,imx6sl-ccm"); + else + imx6_pm_ccm_init("fsl,imx6sll-ccm"); } static const char * const imx6sl_dt_compat[] __initconst = { "fsl,imx6sl", + "fsl,imx6sll", NULL, }; diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 34f2ff6..e047611 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -39,6 +39,7 @@ #define MXC_CPU_IMX6SX 0x62 #define MXC_CPU_IMX6Q 0x63 #define MXC_CPU_IMX6UL 0x64 +#define MXC_CPU_IMX6SLL 0x67 #define MXC_CPU_IMX7D 0x72 #define IMX_DDR_TYPE_LPDDR2 1 @@ -73,6 +74,11 @@ static inline bool cpu_is_imx6ul(void) return __mxc_cpu_type == MXC_CPU_IMX6UL; } +static inline bool cpu_is_imx6sll(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SLL; +} + static inline bool cpu_is_imx6q(void) { return __mxc_cpu_type == MXC_CPU_IMX6Q; -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 02/11] driver: clocksource: add gpt timer for imx6sll 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-02 6:39 ` Bai Ping -1 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: devicetree, kernel, daniel.lezcano, linux-gpio, p.zabel, fabio.estevam, tglx, linux-clk, linux-arm-kernel, ping.bai Add gpt timer support for i.MX6SLL. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- drivers/clocksource/timer-imx-gpt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clocksource/timer-imx-gpt.c b/drivers/clocksource/timer-imx-gpt.c index f595460..f71822d 100644 --- a/drivers/clocksource/timer-imx-gpt.c +++ b/drivers/clocksource/timer-imx-gpt.c @@ -556,4 +556,5 @@ static int __init imx6dl_timer_init_dt(struct device_node *np) CLOCKSOURCE_OF_DECLARE(imx6q_timer, "fsl,imx6q-gpt", imx31_timer_init_dt); CLOCKSOURCE_OF_DECLARE(imx6dl_timer, "fsl,imx6dl-gpt", imx6dl_timer_init_dt); CLOCKSOURCE_OF_DECLARE(imx6sl_timer, "fsl,imx6sl-gpt", imx6dl_timer_init_dt); +CLOCKSOURCE_OF_DECLARE(imx6sll_timer, "fsl,imx6sll-gpt", imx6dl_timer_init_dt); CLOCKSOURCE_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt); -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 02/11] driver: clocksource: add gpt timer for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: linux-arm-kernel Add gpt timer support for i.MX6SLL. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- drivers/clocksource/timer-imx-gpt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clocksource/timer-imx-gpt.c b/drivers/clocksource/timer-imx-gpt.c index f595460..f71822d 100644 --- a/drivers/clocksource/timer-imx-gpt.c +++ b/drivers/clocksource/timer-imx-gpt.c @@ -556,4 +556,5 @@ static int __init imx6dl_timer_init_dt(struct device_node *np) CLOCKSOURCE_OF_DECLARE(imx6q_timer, "fsl,imx6q-gpt", imx31_timer_init_dt); CLOCKSOURCE_OF_DECLARE(imx6dl_timer, "fsl,imx6dl-gpt", imx6dl_timer_init_dt); CLOCKSOURCE_OF_DECLARE(imx6sl_timer, "fsl,imx6sl-gpt", imx6dl_timer_init_dt); +CLOCKSOURCE_OF_DECLARE(imx6sll_timer, "fsl,imx6sll-gpt", imx6dl_timer_init_dt); CLOCKSOURCE_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt); -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 02/11] driver: clocksource: add gpt timer for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Add gpt timer support for i.MX6SLL. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- drivers/clocksource/timer-imx-gpt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clocksource/timer-imx-gpt.c b/drivers/clocksource/timer-imx-gpt.c index f595460..f71822d 100644 --- a/drivers/clocksource/timer-imx-gpt.c +++ b/drivers/clocksource/timer-imx-gpt.c @@ -556,4 +556,5 @@ static int __init imx6dl_timer_init_dt(struct device_node *np) CLOCKSOURCE_OF_DECLARE(imx6q_timer, "fsl,imx6q-gpt", imx31_timer_init_dt); CLOCKSOURCE_OF_DECLARE(imx6dl_timer, "fsl,imx6dl-gpt", imx6dl_timer_init_dt); CLOCKSOURCE_OF_DECLARE(imx6sl_timer, "fsl,imx6sl-gpt", imx6dl_timer_init_dt); +CLOCKSOURCE_OF_DECLARE(imx6sll_timer, "fsl,imx6sll-gpt", imx6dl_timer_init_dt); CLOCKSOURCE_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt); -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-02 6:39 ` Bai Ping -1 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: devicetree, kernel, daniel.lezcano, linux-gpio, p.zabel, fabio.estevam, tglx, linux-clk, linux-arm-kernel, ping.bai Add clk driver support for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- drivers/clk/imx/Makefile | 1 + drivers/clk/imx/clk-imx6sll.c | 366 ++++++++++++++++++++++++++++++ include/dt-bindings/clock/imx6sll-clock.h | 204 +++++++++++++++++ 3 files changed, 571 insertions(+) create mode 100644 drivers/clk/imx/clk-imx6sll.c create mode 100644 include/dt-bindings/clock/imx6sll-clock.h diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile index 1ada68a..9fb8e1f 100644 --- a/drivers/clk/imx/Makefile +++ b/drivers/clk/imx/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_SOC_IMX35) += clk-imx35.o obj-$(CONFIG_SOC_IMX5) += clk-imx51-imx53.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o +obj-$(CONFIG_SOC_IMX6SLL) += clk-imx6sll.o obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += clk-imx6ul.o obj-$(CONFIG_SOC_IMX7D) += clk-imx7d.o diff --git a/drivers/clk/imx/clk-imx6sll.c b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index 0000000..c5219e1 --- /dev/null +++ b/drivers/clk/imx/clk-imx6sll.c @@ -0,0 +1,366 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/clock/imx6sll-clock.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/types.h> + +#include "clk.h" + +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) +#define CCDR 0x4 + +static const char *pll_bypass_src_sels[] = { "osc", "dummy", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; +static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char *axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *axi_sels[] = {"periph", "axi_alt_sel", }; +static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; +static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; +static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; +static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", "dummy",}; +static const char *spdif_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; +static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", }; +static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", }; +static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", }; +static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; +static const char *lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char *uart_sels[] = { "pll3_80m", "osc", }; +static const char *perclk_sels[] = { "ipg", "osc", }; +static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; + +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; +static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; + +static struct clk *clks[IMX6SLL_CLK_END]; +static struct clk_onecell_data clk_data; + +static int const clks_init_on[] __initconst = { + IMX6SLL_CLK_AIPSTZ1, IMX6SLL_CLK_AIPSTZ2, + IMX6SLL_CLK_OCRAM, IMX6SLL_CLK_ARM, IMX6SLL_CLK_ROM, + IMX6SLL_CLK_MMDC_P0_FAST, IMX6SLL_CLK_MMDC_P0_IPG, +}; + +static struct clk_div_table post_div_table[] = { + { .val = 2, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 0, .div = 4, }, + { } +}; + +static struct clk_div_table video_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 1, }, + { .val = 3, .div = 4, }, + { } +}; + +static u32 share_count_audio; +static u32 share_count_ssi1; +static u32 share_count_ssi2; +static u32 share_count_ssi3; + +static void __init imx6sll_clocks_init(struct device_node *ccm_node) +{ + struct device_node *np; + void __iomem *base; + int i; + + clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); + + clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); + clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); + + /* ipp_di clock is external input */ + clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); + clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop"); + base = of_iomap(np, 0); + WARN_ON(!base); + + clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); + clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); + clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); + clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); + clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); + clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); + clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); + + clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + /* Do not bypass PLLs initially */ + clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]); + clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]); + clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]); + clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]); + clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]); + clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]); + clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]); + + clks[IMX6SLL_CLK_PLL1_SYS] = imx_clk_fixed_factor("pll1_sys", "pll1_bypass", 1, 1); + clks[IMX6SLL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); + clks[IMX6SLL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); + clks[IMX6SLL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); + clks[IMX6SLL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); + clks[IMX6SLL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); + clks[IMX6SLL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); + + /* + * Bit 20 is the reserved and read-only bit, we do this only for: + * - Do nothing for usbphy clk_enable/disable + * - Keep refcount when do usbphy clk_enable/disable, in that case, + * the clk framework many need to enable/disable usbphy's parent + */ + clks[IMX6SLL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); + clks[IMX6SLL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); + + /* + * usbphy*_gate needs to be on after system boots up, and software + * never needs to control it anymore. + */ + clks[IMX6SLL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); + clks[IMX6SLL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); + + /* name parent_name reg idx */ + clks[IMX6SLL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); + clks[IMX6SLL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); + clks[IMX6SLL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); + clks[IMX6SLL_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3); + clks[IMX6SLL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); + clks[IMX6SLL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); + clks[IMX6SLL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); + clks[IMX6SLL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); + + clks[IMX6SLL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 15, 1, 0, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); + + /* name parent_name mult div */ + clks[IMX6SLL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); + clks[IMX6SLL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); + clks[IMX6SLL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); + clks[IMX6SLL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); + + np = ccm_node; + base = of_iomap(np, 0); + WARN_ON(!base); + + clks[IMX6SLL_CLK_STEP] = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels)); + clks[IMX6SLL_CLK_PLL1_SW] = imx_clk_mux_flags("pll1_sw", base + 0x0c, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0); + clks[IMX6SLL_CLK_AXI_ALT_SEL] = imx_clk_mux("axi_alt_sel", base + 0x14, 7, 1, axi_alt_sels, ARRAY_SIZE(axi_alt_sels)); + clks[IMX6SLL_CLK_AXI_SEL] = imx_clk_mux_flags("axi_sel", base + 0x14, 6, 1, axi_sels, ARRAY_SIZE(axi_sels), 0); + clks[IMX6SLL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); + clks[IMX6SLL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels)); + clks[IMX6SLL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clks[IMX6SLL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); + clks[IMX6SLL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); + clks[IMX6SLL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); + clks[IMX6SLL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels)); + clks[IMX6SLL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel", base + 0x30, 7, 2, spdif_sels, ARRAY_SIZE(spdif_sels)); + clks[IMX6SLL_CLK_EPDC_PRE_SEL] = imx_clk_mux("epdc_pre_sel", base + 0x34, 15, 3, epdc_pre_sels, ARRAY_SIZE(epdc_pre_sels)); + clks[IMX6SLL_CLK_EPDC_SEL] = imx_clk_mux("epdc_sel", base + 0x34, 9, 3, epdc_sels, ARRAY_SIZE(epdc_sels)); + clks[IMX6SLL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); + clks[IMX6SLL_CLK_LCDIF_PRE_SEL] = imx_clk_mux("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels)); + clks[IMX6SLL_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels)); + + clks[IMX6SLL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); + clks[IMX6SLL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); + + clks[IMX6SLL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); + clks[IMX6SLL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); + clks[IMX6SLL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); + clks[IMX6SLL_CLK_LCDIF_PODF] = imx_clk_divider("lcdif_podf", "lcdif_pred", base + 0x18, 23, 3); + clks[IMX6SLL_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); + clks[IMX6SLL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); + clks[IMX6SLL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); + clks[IMX6SLL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); + clks[IMX6SLL_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6); + clks[IMX6SLL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); + clks[IMX6SLL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); + clks[IMX6SLL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); + clks[IMX6SLL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); + clks[IMX6SLL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); + clks[IMX6SLL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); + clks[IMX6SLL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); + clks[IMX6SLL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); + clks[IMX6SLL_CLK_EXTERN_AUDIO_PRED] = imx_clk_divider("extern_audio_pred", "extern_audio_sel", base + 0x30, 12, 3); + clks[IMX6SLL_CLK_EXTERN_AUDIO_PODF] = imx_clk_divider("extern_audio_podf", "extern_audio_pred", base + 0x30, 9, 3); + clks[IMX6SLL_CLK_EPDC_PODF] = imx_clk_divider("epdc_podf", "epdc_pre_sel", base + 0x34, 12, 3); + clks[IMX6SLL_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6); + clks[IMX6SLL_CLK_LCDIF_PRED] = imx_clk_divider("lcdif_pred", "lcdif_pre_sel", base + 0x38, 12, 3); + + clks[IMX6SLL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); + clks[IMX6SLL_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); + clks[IMX6SLL_CLK_AXI_PODF] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0); + clks[IMX6SLL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); + + clks[IMX6SLL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clks[IMX6SLL_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7); + clks[IMX6SLL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clks[IMX6SLL_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7); + + clks[IMX6SLL_CLK_LDB_DI0_SEL] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels)); + clks[IMX6SLL_CLK_LDB_DI1_SEL] = imx_clk_mux("ldb_di1_sel", base + 0x1c, 7, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels)); + clks[IMX6SLL_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels)); + clks[IMX6SLL_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux("ldb_di1_div_sel", base + 0x20, 10, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels)); + + /* CCGR0 */ + clks[IMX6SLL_CLK_AIPSTZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0); + clks[IMX6SLL_CLK_AIPSTZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2); + clks[IMX6SLL_CLK_DCP] = imx_clk_gate2("dcp", "ahb", base + 0x68, 10); + clks[IMX6SLL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28); + clks[IMX6SLL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28); + + /* CCGR1 */ + clks[IMX6SLL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); + clks[IMX6SLL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2); + clks[IMX6SLL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4); + clks[IMX6SLL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6); + clks[IMX6SLL_CLK_UART3_IPG] = imx_clk_gate2("uart3_ipg", "ipg", base + 0x6c, 10); + clks[IMX6SLL_CLK_UART3_SERIAL] = imx_clk_gate2("uart3_serial", "uart_podf", base + 0x6c, 10); + clks[IMX6SLL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); + clks[IMX6SLL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); + clks[IMX6SLL_CLK_GPT_BUS] = imx_clk_gate2("gpt1_bus", "perclk", base + 0x6c, 20); + clks[IMX6SLL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt1_serial", "perclk", base + 0x6c, 22); + clks[IMX6SLL_CLK_UART4_IPG] = imx_clk_gate2("uart4_ipg", "ipg", base + 0x6c, 24); + clks[IMX6SLL_CLK_UART4_SERIAL] = imx_clk_gate2("uart4_serail", "uart_podf", base + 0x6c, 24); + + /* CCGR2 */ + clks[IMX6SLL_CLK_CSI] = imx_clk_gate2("csi", "axi", base + 0x70, 2); + clks[IMX6SLL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); + clks[IMX6SLL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); + clks[IMX6SLL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); + clks[IMX6SLL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); + clks[IMX6SLL_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "axi", base + 0x70, 28); + clks[IMX6SLL_CLK_PXP] = imx_clk_gate2("pxp", "axi", base + 0x70, 30); + + /* CCGR3 */ + clks[IMX6SLL_CLK_UART5_IPG] = imx_clk_gate2("uart5_ipg", "ipg", base + 0x74, 2); + clks[IMX6SLL_CLK_UART5_SERIAL] = imx_clk_gate2("uart5_serial", "uart_podf", base + 0x74, 2); + clks[IMX6SLL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_aclk", "axi", base + 0x74, 4); + clks[IMX6SLL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_podf", base + 0x74, 4); + clks[IMX6SLL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10); + clks[IMX6SLL_CLK_WDOG1] = imx_clk_gate2("wdog1", "ipg", base + 0x74, 16); + clks[IMX6SLL_CLK_MMDC_P0_FAST] = imx_clk_gate("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20); + clks[IMX6SLL_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24); + clks[IMX6SLL_CLK_OCRAM] = imx_clk_gate("ocram", "ahb", base + 0x74, 28); + + /* CCGR4 */ + clks[IMX6SLL_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); + clks[IMX6SLL_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); + clks[IMX6SLL_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); + clks[IMX6SLL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); + + /* CCGR5 */ + clks[IMX6SLL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); + clks[IMX6SLL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); + clks[IMX6SLL_CLK_WDOG2] = imx_clk_gate2("wdog2", "ipg", base + 0x7c, 10); + clks[IMX6SLL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); + clks[IMX6SLL_CLK_EXTERN_AUDIO] = imx_clk_gate2_shared("extern_audio", "extern_audio_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SLL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SLL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SLL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SLL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); + clks[IMX6SLL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); + clks[IMX6SLL_CLK_UART1_IPG] = imx_clk_gate2("uart1_ipg", "ipg", base + 0x7c, 24); + clks[IMX6SLL_CLK_UART1_SERIAL] = imx_clk_gate2("uart1_serial", "uart_podf", base + 0x7c, 24); + + /* CCGR6 */ + clks[IMX6SLL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); + clks[IMX6SLL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); + clks[IMX6SLL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); + clks[IMX6SLL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); + + /* mask handshake of mmdc */ + writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR); + + for (i = 0; i < ARRAY_SIZE(clks); i++) + if (IS_ERR(clks[i])) + pr_err("i.MX6SLL clk %d: register failed with %ld\n", i, PTR_ERR(clks[i])); + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + /* set perclk to from OSC */ + clk_set_parent(clks[IMX6SLL_CLK_PERCLK_SEL], clks[IMX6SLL_CLK_OSC]); + + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clks[clks_init_on[i]]); + + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { + clk_prepare_enable(clks[IMX6SLL_CLK_USBPHY1_GATE]); + clk_prepare_enable(clks[IMX6SLL_CLK_USBPHY2_GATE]); + } + + /* Lower the AHB clock rate before changing the clock source. */ + clk_set_rate(clks[IMX6SLL_CLK_AHB], 99000000); + + /* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */ + clk_set_parent(clks[IMX6SLL_CLK_PERIPH_CLK2_SEL], clks[IMX6SLL_CLK_PLL3_USB_OTG]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_CLK2]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH_PRE], clks[IMX6SLL_CLK_PLL2_BUS]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_PRE]); + + clk_set_rate(clks[IMX6SLL_CLK_AHB], 132000000); +} + +CLK_OF_DECLARE(imx6sll, "fsl,imx6sll-ccm", imx6sll_clocks_init); + diff --git a/include/dt-bindings/clock/imx6sll-clock.h b/include/dt-bindings/clock/imx6sll-clock.h new file mode 100644 index 0000000..39c2567 --- /dev/null +++ b/include/dt-bindings/clock/imx6sll-clock.h @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX6SLL_H +#define __DT_BINDINGS_CLOCK_IMX6SLL_H + +#define IMX6SLL_CLK_DUMMY 0 +#define IMX6SLL_CLK_CKIL 1 +#define IMX6SLL_CLK_OSC 2 +#define IMX6SLL_PLL1_BYPASS_SRC 3 +#define IMX6SLL_PLL2_BYPASS_SRC 4 +#define IMX6SLL_PLL3_BYPASS_SRC 5 +#define IMX6SLL_PLL4_BYPASS_SRC 6 +#define IMX6SLL_PLL5_BYPASS_SRC 7 +#define IMX6SLL_PLL6_BYPASS_SRC 8 +#define IMX6SLL_PLL7_BYPASS_SRC 9 +#define IMX6SLL_CLK_PLL1 10 +#define IMX6SLL_CLK_PLL2 11 +#define IMX6SLL_CLK_PLL3 12 +#define IMX6SLL_CLK_PLL4 13 +#define IMX6SLL_CLK_PLL5 14 +#define IMX6SLL_CLK_PLL6 15 +#define IMX6SLL_CLK_PLL7 16 +#define IMX6SLL_PLL1_BYPASS 17 +#define IMX6SLL_PLL2_BYPASS 18 +#define IMX6SLL_PLL3_BYPASS 19 +#define IMX6SLL_PLL4_BYPASS 20 +#define IMX6SLL_PLL5_BYPASS 21 +#define IMX6SLL_PLL6_BYPASS 22 +#define IMX6SLL_PLL7_BYPASS 23 +#define IMX6SLL_CLK_PLL1_SYS 24 +#define IMX6SLL_CLK_PLL2_BUS 25 +#define IMX6SLL_CLK_PLL3_USB_OTG 26 +#define IMX6SLL_CLK_PLL4_AUDIO 27 +#define IMX6SLL_CLK_PLL5_VIDEO 28 +#define IMX6SLL_CLK_PLL6_ENET 29 +#define IMX6SLL_CLK_PLL7_USB_HOST 30 +#define IMX6SLL_CLK_USBPHY1 31 +#define IMX6SLL_CLK_USBPHY2 32 +#define IMX6SLL_CLK_USBPHY1_GATE 33 +#define IMX6SLL_CLK_USBPHY2_GATE 34 +#define IMX6SLL_CLK_PLL2_PFD0 35 +#define IMX6SLL_CLK_PLL2_PFD1 36 +#define IMX6SLL_CLK_PLL2_PFD2 37 +#define IMX6SLL_CLK_PLL2_PFD3 38 +#define IMX6SLL_CLK_PLL3_PFD0 39 +#define IMX6SLL_CLK_PLL3_PFD1 40 +#define IMX6SLL_CLK_PLL3_PFD2 41 +#define IMX6SLL_CLK_PLL3_PFD3 42 +#define IMX6SLL_CLK_PLL4_POST_DIV 43 +#define IMX6SLL_CLK_PLL4_AUDIO_DIV 44 +#define IMX6SLL_CLK_PLL5_POST_DIV 45 +#define IMX6SLL_CLK_PLL5_VIDEO_DIV 46 +#define IMX6SLL_CLK_PLL2_198M 47 +#define IMX6SLL_CLK_PLL3_120M 48 +#define IMX6SLL_CLK_PLL3_80M 49 +#define IMX6SLL_CLK_PLL3_60M 50 +#define IMX6SLL_CLK_STEP 51 +#define IMX6SLL_CLK_PLL1_SW 52 +#define IMX6SLL_CLK_AXI_ALT_SEL 53 +#define IMX6SLL_CLK_AXI_SEL 54 +#define IMX6SLL_CLK_PERIPH_PRE 55 +#define IMX6SLL_CLK_PERIPH2_PRE 56 +#define IMX6SLL_CLK_PERIPH_CLK2_SEL 57 +#define IMX6SLL_CLK_PERIPH2_CLK2_SEL 58 +#define IMX6SLL_CLK_PERCLK_SEL 59 +#define IMX6SLL_CLK_USDHC1_SEL 60 +#define IMX6SLL_CLK_USDHC2_SEL 61 +#define IMX6SLL_CLK_USDHC3_SEL 62 +#define IMX6SLL_CLK_SSI1_SEL 63 +#define IMX6SLL_CLK_SSI2_SEL 64 +#define IMX6SLL_CLK_SSI3_SEL 65 +#define IMX6SLL_CLK_PXP_SEL 66 +#define IMX6SLL_CLK_LCDIF_PRE_SEL 67 +#define IMX6SLL_CLK_LCDIF_SEL 68 +#define IMX6SLL_CLK_EPDC_PRE_SEL 69 +#define IMX6SLL_CLK_SPDIF_SEL 70 +#define IMX6SLL_CLK_ECSPI_SEL 71 +#define IMX6SLL_CLK_UART_SEL 72 +#define IMX6SLL_CLK_ARM 73 +#define IMX6SLL_CLK_PERIPH 74 +#define IMX6SLL_CLK_PERIPH2 75 +#define IMX6SLL_CLK_PERIPH2_CLK2 76 +#define IMX6SLL_CLK_PERIPH_CLK2 77 +#define IMX6SLL_CLK_MMDC_PODF 78 +#define IMX6SLL_CLK_AXI_PODF 79 +#define IMX6SLL_CLK_AHB 80 +#define IMX6SLL_CLK_IPG 81 +#define IMX6SLL_CLK_PERCLK 82 +#define IMX6SLL_CLK_USDHC1_PODF 83 +#define IMX6SLL_CLK_USDHC2_PODF 84 +#define IMX6SLL_CLK_USDHC3_PODF 85 +#define IMX6SLL_CLK_SSI1_PRED 86 +#define IMX6SLL_CLK_SSI2_PRED 87 +#define IMX6SLL_CLK_SSI3_PRED 88 +#define IMX6SLL_CLK_SSI1_PODF 89 +#define IMX6SLL_CLK_SSI2_PODF 90 +#define IMX6SLL_CLK_SSI3_PODF 91 +#define IMX6SLL_CLK_PXP_PODF 92 +#define IMX6SLL_CLK_LCDIF_PRED 93 +#define IMX6SLL_CLK_LCDIF_PODF 94 +#define IMX6SLL_CLK_EPDC_SEL 95 +#define IMX6SLL_CLK_EPDC_PODF 96 +#define IMX6SLL_CLK_SPDIF_PRED 97 +#define IMX6SLL_CLK_SPDIF_PODF 98 +#define IMX6SLL_CLK_ECSPI_PODF 99 +#define IMX6SLL_CLK_UART_PODF 100 + +/* CCGR 0 */ +#define IMX6SLL_CLK_AIPSTZ1 101 +#define IMX6SLL_CLK_AIPSTZ2 102 +#define IMX6SLL_CLK_DCP 103 +#define IMX6SLL_CLK_UART2_IPG 104 +#define IMX6SLL_CLK_UART2_SERIAL 105 + +/* CCGR 1 */ +#define IMX6SLL_CLK_ECSPI1 106 +#define IMX6SLL_CLK_ECSPI2 107 +#define IMX6SLL_CLK_ECSPI3 108 +#define IMX6SLL_CLK_ECSPI4 109 +#define IMX6SLL_CLK_UART3_IPG 110 +#define IMX6SLL_CLK_UART3_SERIAL 111 +#define IMX6SLL_CLK_UART4_IPG 112 +#define IMX6SLL_CLK_UART4_SERIAL 113 +#define IMX6SLL_CLK_EPIT1 114 +#define IMX6SLL_CLK_EPIT2 115 +#define IMX6SLL_CLK_GPT_BUS 116 +#define IMX6SLL_CLK_GPT_SERIAL 117 + +/* CCGR2 */ +#define IMX6SLL_CLK_CSI 118 +#define IMX6SLL_CLK_I2C1 119 +#define IMX6SLL_CLK_I2C2 120 +#define IMX6SLL_CLK_I2C3 121 +#define IMX6SLL_CLK_OCOTP 122 +#define IMX6SLL_CLK_LCDIF_APB 123 +#define IMX6SLL_CLK_PXP 124 + +/* CCGR3 */ +#define IMX6SLL_CLK_UART5_IPG 125 +#define IMX6SLL_CLK_UART5_SERIAL 126 +#define IMX6SLL_CLK_EPDC_AXI 127 +#define IMX6SLL_CLK_EPDC_PIX 128 +#define IMX6SLL_CLK_LCDIF_PIX 129 +#define IMX6SLL_CLK_WDOG1 130 +#define IMX6SLL_CLK_MMDC_P0_FAST 131 +#define IMX6SLL_CLK_MMDC_P0_IPG 132 +#define IMX6SLL_CLK_OCRAM 133 + +/* CCGR4 */ +#define IMX6SLL_CLK_PWM1 134 +#define IMX6SLL_CLK_PWM2 135 +#define IMX6SLL_CLK_PWM3 136 +#define IMX6SLL_CLK_PWM4 137 + +/* CCGR 5 */ +#define IMX6SLL_CLK_ROM 138 +#define IMX6SLL_CLK_SDMA 139 +#define IMX6SLL_CLK_KPP 140 +#define IMX6SLL_CLK_WDOG2 141 +#define IMX6SLL_CLK_SPBA 142 +#define IMX6SLL_CLK_SPDIF 143 +#define IMX6SLL_CLK_SPDIF_GCLK 144 +#define IMX6SLL_CLK_SSI1 145 +#define IMX6SLL_CLK_SSI1_IPG 146 +#define IMX6SLL_CLK_SSI2 147 +#define IMX6SLL_CLK_SSI2_IPG 148 +#define IMX6SLL_CLK_SSI3 149 +#define IMX6SLL_CLK_SSI3_IPG 150 +#define IMX6SLL_CLK_UART1_IPG 151 +#define IMX6SLL_CLK_UART1_SERIAL 152 + +/* CCGR 6 */ +#define IMX6SLL_CLK_USBOH3 153 +#define IMX6SLL_CLK_USDHC1 154 +#define IMX6SLL_CLK_USDHC2 155 +#define IMX6SLL_CLK_USDHC3 156 + +#define IMX6SLL_CLK_IPP_DI0 157 +#define IMX6SLL_CLK_IPP_DI1 158 +#define IMX6SLL_CLK_LDB_DI0_SEL 159 +#define IMX6SLL_CLK_LDB_DI0_DIV_3_5 160 +#define IMX6SLL_CLK_LDB_DI0_DIV_7 161 +#define IMX6SLL_CLK_LDB_DI0_DIV_SEL 162 +#define IMX6SLL_CLK_LDB_DI0 163 +#define IMX6SLL_CLK_LDB_DI1_SEL 164 +#define IMX6SLL_CLK_LDB_DI1_DIV_3_5 165 +#define IMX6SLL_CLK_LDB_DI1_DIV_7 166 +#define IMX6SLL_CLK_LDB_DI1_DIV_SEL 167 +#define IMX6SLL_CLK_LDB_DI1 168 +#define IMX6SLL_CLK_EXTERN_AUDIO_SEL 169 +#define IMX6SLL_CLK_EXTERN_AUDIO_PRED 170 +#define IMX6SLL_CLK_EXTERN_AUDIO_PODF 171 +#define IMX6SLL_CLK_EXTERN_AUDIO 172 + +#define IMX6SLL_CLK_END 173 + +#endif /* __DT_BINDINGS_CLOCK_IMX6SLL_H */ -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: linux-arm-kernel Add clk driver support for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- drivers/clk/imx/Makefile | 1 + drivers/clk/imx/clk-imx6sll.c | 366 ++++++++++++++++++++++++++++++ include/dt-bindings/clock/imx6sll-clock.h | 204 +++++++++++++++++ 3 files changed, 571 insertions(+) create mode 100644 drivers/clk/imx/clk-imx6sll.c create mode 100644 include/dt-bindings/clock/imx6sll-clock.h diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile index 1ada68a..9fb8e1f 100644 --- a/drivers/clk/imx/Makefile +++ b/drivers/clk/imx/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_SOC_IMX35) += clk-imx35.o obj-$(CONFIG_SOC_IMX5) += clk-imx51-imx53.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o +obj-$(CONFIG_SOC_IMX6SLL) += clk-imx6sll.o obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += clk-imx6ul.o obj-$(CONFIG_SOC_IMX7D) += clk-imx7d.o diff --git a/drivers/clk/imx/clk-imx6sll.c b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index 0000000..c5219e1 --- /dev/null +++ b/drivers/clk/imx/clk-imx6sll.c @@ -0,0 +1,366 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/clock/imx6sll-clock.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/types.h> + +#include "clk.h" + +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) +#define CCDR 0x4 + +static const char *pll_bypass_src_sels[] = { "osc", "dummy", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; +static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char *axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *axi_sels[] = {"periph", "axi_alt_sel", }; +static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; +static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; +static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; +static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", "dummy",}; +static const char *spdif_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; +static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", }; +static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", }; +static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", }; +static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; +static const char *lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char *uart_sels[] = { "pll3_80m", "osc", }; +static const char *perclk_sels[] = { "ipg", "osc", }; +static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; + +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; +static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; + +static struct clk *clks[IMX6SLL_CLK_END]; +static struct clk_onecell_data clk_data; + +static int const clks_init_on[] __initconst = { + IMX6SLL_CLK_AIPSTZ1, IMX6SLL_CLK_AIPSTZ2, + IMX6SLL_CLK_OCRAM, IMX6SLL_CLK_ARM, IMX6SLL_CLK_ROM, + IMX6SLL_CLK_MMDC_P0_FAST, IMX6SLL_CLK_MMDC_P0_IPG, +}; + +static struct clk_div_table post_div_table[] = { + { .val = 2, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 0, .div = 4, }, + { } +}; + +static struct clk_div_table video_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 1, }, + { .val = 3, .div = 4, }, + { } +}; + +static u32 share_count_audio; +static u32 share_count_ssi1; +static u32 share_count_ssi2; +static u32 share_count_ssi3; + +static void __init imx6sll_clocks_init(struct device_node *ccm_node) +{ + struct device_node *np; + void __iomem *base; + int i; + + clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); + + clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); + clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); + + /* ipp_di clock is external input */ + clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); + clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop"); + base = of_iomap(np, 0); + WARN_ON(!base); + + clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); + clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); + clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); + clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); + clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); + clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); + clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); + + clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + /* Do not bypass PLLs initially */ + clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]); + clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]); + clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]); + clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]); + clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]); + clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]); + clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]); + + clks[IMX6SLL_CLK_PLL1_SYS] = imx_clk_fixed_factor("pll1_sys", "pll1_bypass", 1, 1); + clks[IMX6SLL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); + clks[IMX6SLL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); + clks[IMX6SLL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); + clks[IMX6SLL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); + clks[IMX6SLL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); + clks[IMX6SLL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); + + /* + * Bit 20 is the reserved and read-only bit, we do this only for: + * - Do nothing for usbphy clk_enable/disable + * - Keep refcount when do usbphy clk_enable/disable, in that case, + * the clk framework many need to enable/disable usbphy's parent + */ + clks[IMX6SLL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); + clks[IMX6SLL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); + + /* + * usbphy*_gate needs to be on after system boots up, and software + * never needs to control it anymore. + */ + clks[IMX6SLL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); + clks[IMX6SLL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); + + /* name parent_name reg idx */ + clks[IMX6SLL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); + clks[IMX6SLL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); + clks[IMX6SLL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); + clks[IMX6SLL_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3); + clks[IMX6SLL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); + clks[IMX6SLL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); + clks[IMX6SLL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); + clks[IMX6SLL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); + + clks[IMX6SLL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 15, 1, 0, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); + + /* name parent_name mult div */ + clks[IMX6SLL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); + clks[IMX6SLL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); + clks[IMX6SLL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); + clks[IMX6SLL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); + + np = ccm_node; + base = of_iomap(np, 0); + WARN_ON(!base); + + clks[IMX6SLL_CLK_STEP] = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels)); + clks[IMX6SLL_CLK_PLL1_SW] = imx_clk_mux_flags("pll1_sw", base + 0x0c, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0); + clks[IMX6SLL_CLK_AXI_ALT_SEL] = imx_clk_mux("axi_alt_sel", base + 0x14, 7, 1, axi_alt_sels, ARRAY_SIZE(axi_alt_sels)); + clks[IMX6SLL_CLK_AXI_SEL] = imx_clk_mux_flags("axi_sel", base + 0x14, 6, 1, axi_sels, ARRAY_SIZE(axi_sels), 0); + clks[IMX6SLL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); + clks[IMX6SLL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels)); + clks[IMX6SLL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clks[IMX6SLL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); + clks[IMX6SLL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); + clks[IMX6SLL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); + clks[IMX6SLL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels)); + clks[IMX6SLL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel", base + 0x30, 7, 2, spdif_sels, ARRAY_SIZE(spdif_sels)); + clks[IMX6SLL_CLK_EPDC_PRE_SEL] = imx_clk_mux("epdc_pre_sel", base + 0x34, 15, 3, epdc_pre_sels, ARRAY_SIZE(epdc_pre_sels)); + clks[IMX6SLL_CLK_EPDC_SEL] = imx_clk_mux("epdc_sel", base + 0x34, 9, 3, epdc_sels, ARRAY_SIZE(epdc_sels)); + clks[IMX6SLL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); + clks[IMX6SLL_CLK_LCDIF_PRE_SEL] = imx_clk_mux("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels)); + clks[IMX6SLL_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels)); + + clks[IMX6SLL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); + clks[IMX6SLL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); + + clks[IMX6SLL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); + clks[IMX6SLL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); + clks[IMX6SLL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); + clks[IMX6SLL_CLK_LCDIF_PODF] = imx_clk_divider("lcdif_podf", "lcdif_pred", base + 0x18, 23, 3); + clks[IMX6SLL_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); + clks[IMX6SLL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); + clks[IMX6SLL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); + clks[IMX6SLL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); + clks[IMX6SLL_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6); + clks[IMX6SLL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); + clks[IMX6SLL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); + clks[IMX6SLL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); + clks[IMX6SLL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); + clks[IMX6SLL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); + clks[IMX6SLL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); + clks[IMX6SLL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); + clks[IMX6SLL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); + clks[IMX6SLL_CLK_EXTERN_AUDIO_PRED] = imx_clk_divider("extern_audio_pred", "extern_audio_sel", base + 0x30, 12, 3); + clks[IMX6SLL_CLK_EXTERN_AUDIO_PODF] = imx_clk_divider("extern_audio_podf", "extern_audio_pred", base + 0x30, 9, 3); + clks[IMX6SLL_CLK_EPDC_PODF] = imx_clk_divider("epdc_podf", "epdc_pre_sel", base + 0x34, 12, 3); + clks[IMX6SLL_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6); + clks[IMX6SLL_CLK_LCDIF_PRED] = imx_clk_divider("lcdif_pred", "lcdif_pre_sel", base + 0x38, 12, 3); + + clks[IMX6SLL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); + clks[IMX6SLL_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); + clks[IMX6SLL_CLK_AXI_PODF] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0); + clks[IMX6SLL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); + + clks[IMX6SLL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clks[IMX6SLL_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7); + clks[IMX6SLL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clks[IMX6SLL_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7); + + clks[IMX6SLL_CLK_LDB_DI0_SEL] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels)); + clks[IMX6SLL_CLK_LDB_DI1_SEL] = imx_clk_mux("ldb_di1_sel", base + 0x1c, 7, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels)); + clks[IMX6SLL_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels)); + clks[IMX6SLL_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux("ldb_di1_div_sel", base + 0x20, 10, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels)); + + /* CCGR0 */ + clks[IMX6SLL_CLK_AIPSTZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0); + clks[IMX6SLL_CLK_AIPSTZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2); + clks[IMX6SLL_CLK_DCP] = imx_clk_gate2("dcp", "ahb", base + 0x68, 10); + clks[IMX6SLL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28); + clks[IMX6SLL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28); + + /* CCGR1 */ + clks[IMX6SLL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); + clks[IMX6SLL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2); + clks[IMX6SLL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4); + clks[IMX6SLL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6); + clks[IMX6SLL_CLK_UART3_IPG] = imx_clk_gate2("uart3_ipg", "ipg", base + 0x6c, 10); + clks[IMX6SLL_CLK_UART3_SERIAL] = imx_clk_gate2("uart3_serial", "uart_podf", base + 0x6c, 10); + clks[IMX6SLL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); + clks[IMX6SLL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); + clks[IMX6SLL_CLK_GPT_BUS] = imx_clk_gate2("gpt1_bus", "perclk", base + 0x6c, 20); + clks[IMX6SLL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt1_serial", "perclk", base + 0x6c, 22); + clks[IMX6SLL_CLK_UART4_IPG] = imx_clk_gate2("uart4_ipg", "ipg", base + 0x6c, 24); + clks[IMX6SLL_CLK_UART4_SERIAL] = imx_clk_gate2("uart4_serail", "uart_podf", base + 0x6c, 24); + + /* CCGR2 */ + clks[IMX6SLL_CLK_CSI] = imx_clk_gate2("csi", "axi", base + 0x70, 2); + clks[IMX6SLL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); + clks[IMX6SLL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); + clks[IMX6SLL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); + clks[IMX6SLL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); + clks[IMX6SLL_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "axi", base + 0x70, 28); + clks[IMX6SLL_CLK_PXP] = imx_clk_gate2("pxp", "axi", base + 0x70, 30); + + /* CCGR3 */ + clks[IMX6SLL_CLK_UART5_IPG] = imx_clk_gate2("uart5_ipg", "ipg", base + 0x74, 2); + clks[IMX6SLL_CLK_UART5_SERIAL] = imx_clk_gate2("uart5_serial", "uart_podf", base + 0x74, 2); + clks[IMX6SLL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_aclk", "axi", base + 0x74, 4); + clks[IMX6SLL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_podf", base + 0x74, 4); + clks[IMX6SLL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10); + clks[IMX6SLL_CLK_WDOG1] = imx_clk_gate2("wdog1", "ipg", base + 0x74, 16); + clks[IMX6SLL_CLK_MMDC_P0_FAST] = imx_clk_gate("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20); + clks[IMX6SLL_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24); + clks[IMX6SLL_CLK_OCRAM] = imx_clk_gate("ocram", "ahb", base + 0x74, 28); + + /* CCGR4 */ + clks[IMX6SLL_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); + clks[IMX6SLL_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); + clks[IMX6SLL_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); + clks[IMX6SLL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); + + /* CCGR5 */ + clks[IMX6SLL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); + clks[IMX6SLL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); + clks[IMX6SLL_CLK_WDOG2] = imx_clk_gate2("wdog2", "ipg", base + 0x7c, 10); + clks[IMX6SLL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); + clks[IMX6SLL_CLK_EXTERN_AUDIO] = imx_clk_gate2_shared("extern_audio", "extern_audio_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SLL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SLL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SLL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SLL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); + clks[IMX6SLL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); + clks[IMX6SLL_CLK_UART1_IPG] = imx_clk_gate2("uart1_ipg", "ipg", base + 0x7c, 24); + clks[IMX6SLL_CLK_UART1_SERIAL] = imx_clk_gate2("uart1_serial", "uart_podf", base + 0x7c, 24); + + /* CCGR6 */ + clks[IMX6SLL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); + clks[IMX6SLL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); + clks[IMX6SLL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); + clks[IMX6SLL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); + + /* mask handshake of mmdc */ + writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR); + + for (i = 0; i < ARRAY_SIZE(clks); i++) + if (IS_ERR(clks[i])) + pr_err("i.MX6SLL clk %d: register failed with %ld\n", i, PTR_ERR(clks[i])); + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + /* set perclk to from OSC */ + clk_set_parent(clks[IMX6SLL_CLK_PERCLK_SEL], clks[IMX6SLL_CLK_OSC]); + + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clks[clks_init_on[i]]); + + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { + clk_prepare_enable(clks[IMX6SLL_CLK_USBPHY1_GATE]); + clk_prepare_enable(clks[IMX6SLL_CLK_USBPHY2_GATE]); + } + + /* Lower the AHB clock rate before changing the clock source. */ + clk_set_rate(clks[IMX6SLL_CLK_AHB], 99000000); + + /* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */ + clk_set_parent(clks[IMX6SLL_CLK_PERIPH_CLK2_SEL], clks[IMX6SLL_CLK_PLL3_USB_OTG]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_CLK2]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH_PRE], clks[IMX6SLL_CLK_PLL2_BUS]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_PRE]); + + clk_set_rate(clks[IMX6SLL_CLK_AHB], 132000000); +} + +CLK_OF_DECLARE(imx6sll, "fsl,imx6sll-ccm", imx6sll_clocks_init); + diff --git a/include/dt-bindings/clock/imx6sll-clock.h b/include/dt-bindings/clock/imx6sll-clock.h new file mode 100644 index 0000000..39c2567 --- /dev/null +++ b/include/dt-bindings/clock/imx6sll-clock.h @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX6SLL_H +#define __DT_BINDINGS_CLOCK_IMX6SLL_H + +#define IMX6SLL_CLK_DUMMY 0 +#define IMX6SLL_CLK_CKIL 1 +#define IMX6SLL_CLK_OSC 2 +#define IMX6SLL_PLL1_BYPASS_SRC 3 +#define IMX6SLL_PLL2_BYPASS_SRC 4 +#define IMX6SLL_PLL3_BYPASS_SRC 5 +#define IMX6SLL_PLL4_BYPASS_SRC 6 +#define IMX6SLL_PLL5_BYPASS_SRC 7 +#define IMX6SLL_PLL6_BYPASS_SRC 8 +#define IMX6SLL_PLL7_BYPASS_SRC 9 +#define IMX6SLL_CLK_PLL1 10 +#define IMX6SLL_CLK_PLL2 11 +#define IMX6SLL_CLK_PLL3 12 +#define IMX6SLL_CLK_PLL4 13 +#define IMX6SLL_CLK_PLL5 14 +#define IMX6SLL_CLK_PLL6 15 +#define IMX6SLL_CLK_PLL7 16 +#define IMX6SLL_PLL1_BYPASS 17 +#define IMX6SLL_PLL2_BYPASS 18 +#define IMX6SLL_PLL3_BYPASS 19 +#define IMX6SLL_PLL4_BYPASS 20 +#define IMX6SLL_PLL5_BYPASS 21 +#define IMX6SLL_PLL6_BYPASS 22 +#define IMX6SLL_PLL7_BYPASS 23 +#define IMX6SLL_CLK_PLL1_SYS 24 +#define IMX6SLL_CLK_PLL2_BUS 25 +#define IMX6SLL_CLK_PLL3_USB_OTG 26 +#define IMX6SLL_CLK_PLL4_AUDIO 27 +#define IMX6SLL_CLK_PLL5_VIDEO 28 +#define IMX6SLL_CLK_PLL6_ENET 29 +#define IMX6SLL_CLK_PLL7_USB_HOST 30 +#define IMX6SLL_CLK_USBPHY1 31 +#define IMX6SLL_CLK_USBPHY2 32 +#define IMX6SLL_CLK_USBPHY1_GATE 33 +#define IMX6SLL_CLK_USBPHY2_GATE 34 +#define IMX6SLL_CLK_PLL2_PFD0 35 +#define IMX6SLL_CLK_PLL2_PFD1 36 +#define IMX6SLL_CLK_PLL2_PFD2 37 +#define IMX6SLL_CLK_PLL2_PFD3 38 +#define IMX6SLL_CLK_PLL3_PFD0 39 +#define IMX6SLL_CLK_PLL3_PFD1 40 +#define IMX6SLL_CLK_PLL3_PFD2 41 +#define IMX6SLL_CLK_PLL3_PFD3 42 +#define IMX6SLL_CLK_PLL4_POST_DIV 43 +#define IMX6SLL_CLK_PLL4_AUDIO_DIV 44 +#define IMX6SLL_CLK_PLL5_POST_DIV 45 +#define IMX6SLL_CLK_PLL5_VIDEO_DIV 46 +#define IMX6SLL_CLK_PLL2_198M 47 +#define IMX6SLL_CLK_PLL3_120M 48 +#define IMX6SLL_CLK_PLL3_80M 49 +#define IMX6SLL_CLK_PLL3_60M 50 +#define IMX6SLL_CLK_STEP 51 +#define IMX6SLL_CLK_PLL1_SW 52 +#define IMX6SLL_CLK_AXI_ALT_SEL 53 +#define IMX6SLL_CLK_AXI_SEL 54 +#define IMX6SLL_CLK_PERIPH_PRE 55 +#define IMX6SLL_CLK_PERIPH2_PRE 56 +#define IMX6SLL_CLK_PERIPH_CLK2_SEL 57 +#define IMX6SLL_CLK_PERIPH2_CLK2_SEL 58 +#define IMX6SLL_CLK_PERCLK_SEL 59 +#define IMX6SLL_CLK_USDHC1_SEL 60 +#define IMX6SLL_CLK_USDHC2_SEL 61 +#define IMX6SLL_CLK_USDHC3_SEL 62 +#define IMX6SLL_CLK_SSI1_SEL 63 +#define IMX6SLL_CLK_SSI2_SEL 64 +#define IMX6SLL_CLK_SSI3_SEL 65 +#define IMX6SLL_CLK_PXP_SEL 66 +#define IMX6SLL_CLK_LCDIF_PRE_SEL 67 +#define IMX6SLL_CLK_LCDIF_SEL 68 +#define IMX6SLL_CLK_EPDC_PRE_SEL 69 +#define IMX6SLL_CLK_SPDIF_SEL 70 +#define IMX6SLL_CLK_ECSPI_SEL 71 +#define IMX6SLL_CLK_UART_SEL 72 +#define IMX6SLL_CLK_ARM 73 +#define IMX6SLL_CLK_PERIPH 74 +#define IMX6SLL_CLK_PERIPH2 75 +#define IMX6SLL_CLK_PERIPH2_CLK2 76 +#define IMX6SLL_CLK_PERIPH_CLK2 77 +#define IMX6SLL_CLK_MMDC_PODF 78 +#define IMX6SLL_CLK_AXI_PODF 79 +#define IMX6SLL_CLK_AHB 80 +#define IMX6SLL_CLK_IPG 81 +#define IMX6SLL_CLK_PERCLK 82 +#define IMX6SLL_CLK_USDHC1_PODF 83 +#define IMX6SLL_CLK_USDHC2_PODF 84 +#define IMX6SLL_CLK_USDHC3_PODF 85 +#define IMX6SLL_CLK_SSI1_PRED 86 +#define IMX6SLL_CLK_SSI2_PRED 87 +#define IMX6SLL_CLK_SSI3_PRED 88 +#define IMX6SLL_CLK_SSI1_PODF 89 +#define IMX6SLL_CLK_SSI2_PODF 90 +#define IMX6SLL_CLK_SSI3_PODF 91 +#define IMX6SLL_CLK_PXP_PODF 92 +#define IMX6SLL_CLK_LCDIF_PRED 93 +#define IMX6SLL_CLK_LCDIF_PODF 94 +#define IMX6SLL_CLK_EPDC_SEL 95 +#define IMX6SLL_CLK_EPDC_PODF 96 +#define IMX6SLL_CLK_SPDIF_PRED 97 +#define IMX6SLL_CLK_SPDIF_PODF 98 +#define IMX6SLL_CLK_ECSPI_PODF 99 +#define IMX6SLL_CLK_UART_PODF 100 + +/* CCGR 0 */ +#define IMX6SLL_CLK_AIPSTZ1 101 +#define IMX6SLL_CLK_AIPSTZ2 102 +#define IMX6SLL_CLK_DCP 103 +#define IMX6SLL_CLK_UART2_IPG 104 +#define IMX6SLL_CLK_UART2_SERIAL 105 + +/* CCGR 1 */ +#define IMX6SLL_CLK_ECSPI1 106 +#define IMX6SLL_CLK_ECSPI2 107 +#define IMX6SLL_CLK_ECSPI3 108 +#define IMX6SLL_CLK_ECSPI4 109 +#define IMX6SLL_CLK_UART3_IPG 110 +#define IMX6SLL_CLK_UART3_SERIAL 111 +#define IMX6SLL_CLK_UART4_IPG 112 +#define IMX6SLL_CLK_UART4_SERIAL 113 +#define IMX6SLL_CLK_EPIT1 114 +#define IMX6SLL_CLK_EPIT2 115 +#define IMX6SLL_CLK_GPT_BUS 116 +#define IMX6SLL_CLK_GPT_SERIAL 117 + +/* CCGR2 */ +#define IMX6SLL_CLK_CSI 118 +#define IMX6SLL_CLK_I2C1 119 +#define IMX6SLL_CLK_I2C2 120 +#define IMX6SLL_CLK_I2C3 121 +#define IMX6SLL_CLK_OCOTP 122 +#define IMX6SLL_CLK_LCDIF_APB 123 +#define IMX6SLL_CLK_PXP 124 + +/* CCGR3 */ +#define IMX6SLL_CLK_UART5_IPG 125 +#define IMX6SLL_CLK_UART5_SERIAL 126 +#define IMX6SLL_CLK_EPDC_AXI 127 +#define IMX6SLL_CLK_EPDC_PIX 128 +#define IMX6SLL_CLK_LCDIF_PIX 129 +#define IMX6SLL_CLK_WDOG1 130 +#define IMX6SLL_CLK_MMDC_P0_FAST 131 +#define IMX6SLL_CLK_MMDC_P0_IPG 132 +#define IMX6SLL_CLK_OCRAM 133 + +/* CCGR4 */ +#define IMX6SLL_CLK_PWM1 134 +#define IMX6SLL_CLK_PWM2 135 +#define IMX6SLL_CLK_PWM3 136 +#define IMX6SLL_CLK_PWM4 137 + +/* CCGR 5 */ +#define IMX6SLL_CLK_ROM 138 +#define IMX6SLL_CLK_SDMA 139 +#define IMX6SLL_CLK_KPP 140 +#define IMX6SLL_CLK_WDOG2 141 +#define IMX6SLL_CLK_SPBA 142 +#define IMX6SLL_CLK_SPDIF 143 +#define IMX6SLL_CLK_SPDIF_GCLK 144 +#define IMX6SLL_CLK_SSI1 145 +#define IMX6SLL_CLK_SSI1_IPG 146 +#define IMX6SLL_CLK_SSI2 147 +#define IMX6SLL_CLK_SSI2_IPG 148 +#define IMX6SLL_CLK_SSI3 149 +#define IMX6SLL_CLK_SSI3_IPG 150 +#define IMX6SLL_CLK_UART1_IPG 151 +#define IMX6SLL_CLK_UART1_SERIAL 152 + +/* CCGR 6 */ +#define IMX6SLL_CLK_USBOH3 153 +#define IMX6SLL_CLK_USDHC1 154 +#define IMX6SLL_CLK_USDHC2 155 +#define IMX6SLL_CLK_USDHC3 156 + +#define IMX6SLL_CLK_IPP_DI0 157 +#define IMX6SLL_CLK_IPP_DI1 158 +#define IMX6SLL_CLK_LDB_DI0_SEL 159 +#define IMX6SLL_CLK_LDB_DI0_DIV_3_5 160 +#define IMX6SLL_CLK_LDB_DI0_DIV_7 161 +#define IMX6SLL_CLK_LDB_DI0_DIV_SEL 162 +#define IMX6SLL_CLK_LDB_DI0 163 +#define IMX6SLL_CLK_LDB_DI1_SEL 164 +#define IMX6SLL_CLK_LDB_DI1_DIV_3_5 165 +#define IMX6SLL_CLK_LDB_DI1_DIV_7 166 +#define IMX6SLL_CLK_LDB_DI1_DIV_SEL 167 +#define IMX6SLL_CLK_LDB_DI1 168 +#define IMX6SLL_CLK_EXTERN_AUDIO_SEL 169 +#define IMX6SLL_CLK_EXTERN_AUDIO_PRED 170 +#define IMX6SLL_CLK_EXTERN_AUDIO_PODF 171 +#define IMX6SLL_CLK_EXTERN_AUDIO 172 + +#define IMX6SLL_CLK_END 173 + +#endif /* __DT_BINDINGS_CLOCK_IMX6SLL_H */ -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Add clk driver support for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- drivers/clk/imx/Makefile | 1 + drivers/clk/imx/clk-imx6sll.c | 366 ++++++++++++++++++++++++++++++ include/dt-bindings/clock/imx6sll-clock.h | 204 +++++++++++++++++ 3 files changed, 571 insertions(+) create mode 100644 drivers/clk/imx/clk-imx6sll.c create mode 100644 include/dt-bindings/clock/imx6sll-clock.h diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile index 1ada68a..9fb8e1f 100644 --- a/drivers/clk/imx/Makefile +++ b/drivers/clk/imx/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_SOC_IMX35) += clk-imx35.o obj-$(CONFIG_SOC_IMX5) += clk-imx51-imx53.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o +obj-$(CONFIG_SOC_IMX6SLL) += clk-imx6sll.o obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += clk-imx6ul.o obj-$(CONFIG_SOC_IMX7D) += clk-imx7d.o diff --git a/drivers/clk/imx/clk-imx6sll.c b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index 0000000..c5219e1 --- /dev/null +++ b/drivers/clk/imx/clk-imx6sll.c @@ -0,0 +1,366 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/clock/imx6sll-clock.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/types.h> + +#include "clk.h" + +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) +#define CCDR 0x4 + +static const char *pll_bypass_src_sels[] = { "osc", "dummy", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; +static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char *axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *axi_sels[] = {"periph", "axi_alt_sel", }; +static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; +static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; +static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; +static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", "dummy",}; +static const char *spdif_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; +static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", }; +static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", }; +static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", }; +static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; +static const char *lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char *uart_sels[] = { "pll3_80m", "osc", }; +static const char *perclk_sels[] = { "ipg", "osc", }; +static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; + +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; +static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; + +static struct clk *clks[IMX6SLL_CLK_END]; +static struct clk_onecell_data clk_data; + +static int const clks_init_on[] __initconst = { + IMX6SLL_CLK_AIPSTZ1, IMX6SLL_CLK_AIPSTZ2, + IMX6SLL_CLK_OCRAM, IMX6SLL_CLK_ARM, IMX6SLL_CLK_ROM, + IMX6SLL_CLK_MMDC_P0_FAST, IMX6SLL_CLK_MMDC_P0_IPG, +}; + +static struct clk_div_table post_div_table[] = { + { .val = 2, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 0, .div = 4, }, + { } +}; + +static struct clk_div_table video_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 1, }, + { .val = 3, .div = 4, }, + { } +}; + +static u32 share_count_audio; +static u32 share_count_ssi1; +static u32 share_count_ssi2; +static u32 share_count_ssi3; + +static void __init imx6sll_clocks_init(struct device_node *ccm_node) +{ + struct device_node *np; + void __iomem *base; + int i; + + clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); + + clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); + clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); + + /* ipp_di clock is external input */ + clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); + clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop"); + base = of_iomap(np, 0); + WARN_ON(!base); + + clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); + clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); + clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); + clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); + clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); + clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); + clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); + + clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + /* Do not bypass PLLs initially */ + clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]); + clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]); + clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]); + clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]); + clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]); + clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]); + clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]); + + clks[IMX6SLL_CLK_PLL1_SYS] = imx_clk_fixed_factor("pll1_sys", "pll1_bypass", 1, 1); + clks[IMX6SLL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); + clks[IMX6SLL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); + clks[IMX6SLL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); + clks[IMX6SLL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); + clks[IMX6SLL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); + clks[IMX6SLL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); + + /* + * Bit 20 is the reserved and read-only bit, we do this only for: + * - Do nothing for usbphy clk_enable/disable + * - Keep refcount when do usbphy clk_enable/disable, in that case, + * the clk framework many need to enable/disable usbphy's parent + */ + clks[IMX6SLL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); + clks[IMX6SLL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); + + /* + * usbphy*_gate needs to be on after system boots up, and software + * never needs to control it anymore. + */ + clks[IMX6SLL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); + clks[IMX6SLL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); + + /* name parent_name reg idx */ + clks[IMX6SLL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); + clks[IMX6SLL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); + clks[IMX6SLL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); + clks[IMX6SLL_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3); + clks[IMX6SLL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); + clks[IMX6SLL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); + clks[IMX6SLL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); + clks[IMX6SLL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); + + clks[IMX6SLL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 15, 1, 0, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SLL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", + CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); + + /* name parent_name mult div */ + clks[IMX6SLL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); + clks[IMX6SLL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); + clks[IMX6SLL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); + clks[IMX6SLL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); + + np = ccm_node; + base = of_iomap(np, 0); + WARN_ON(!base); + + clks[IMX6SLL_CLK_STEP] = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels)); + clks[IMX6SLL_CLK_PLL1_SW] = imx_clk_mux_flags("pll1_sw", base + 0x0c, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0); + clks[IMX6SLL_CLK_AXI_ALT_SEL] = imx_clk_mux("axi_alt_sel", base + 0x14, 7, 1, axi_alt_sels, ARRAY_SIZE(axi_alt_sels)); + clks[IMX6SLL_CLK_AXI_SEL] = imx_clk_mux_flags("axi_sel", base + 0x14, 6, 1, axi_sels, ARRAY_SIZE(axi_sels), 0); + clks[IMX6SLL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); + clks[IMX6SLL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels)); + clks[IMX6SLL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clks[IMX6SLL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); + clks[IMX6SLL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SLL_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SLL_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); + clks[IMX6SLL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); + clks[IMX6SLL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels)); + clks[IMX6SLL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel", base + 0x30, 7, 2, spdif_sels, ARRAY_SIZE(spdif_sels)); + clks[IMX6SLL_CLK_EPDC_PRE_SEL] = imx_clk_mux("epdc_pre_sel", base + 0x34, 15, 3, epdc_pre_sels, ARRAY_SIZE(epdc_pre_sels)); + clks[IMX6SLL_CLK_EPDC_SEL] = imx_clk_mux("epdc_sel", base + 0x34, 9, 3, epdc_sels, ARRAY_SIZE(epdc_sels)); + clks[IMX6SLL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); + clks[IMX6SLL_CLK_LCDIF_PRE_SEL] = imx_clk_mux("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels)); + clks[IMX6SLL_CLK_LCDIF_SEL] = imx_clk_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels)); + + clks[IMX6SLL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); + clks[IMX6SLL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); + + clks[IMX6SLL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); + clks[IMX6SLL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); + clks[IMX6SLL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); + clks[IMX6SLL_CLK_LCDIF_PODF] = imx_clk_divider("lcdif_podf", "lcdif_pred", base + 0x18, 23, 3); + clks[IMX6SLL_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); + clks[IMX6SLL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); + clks[IMX6SLL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); + clks[IMX6SLL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); + clks[IMX6SLL_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6); + clks[IMX6SLL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); + clks[IMX6SLL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); + clks[IMX6SLL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); + clks[IMX6SLL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); + clks[IMX6SLL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); + clks[IMX6SLL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); + clks[IMX6SLL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); + clks[IMX6SLL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); + clks[IMX6SLL_CLK_EXTERN_AUDIO_PRED] = imx_clk_divider("extern_audio_pred", "extern_audio_sel", base + 0x30, 12, 3); + clks[IMX6SLL_CLK_EXTERN_AUDIO_PODF] = imx_clk_divider("extern_audio_podf", "extern_audio_pred", base + 0x30, 9, 3); + clks[IMX6SLL_CLK_EPDC_PODF] = imx_clk_divider("epdc_podf", "epdc_pre_sel", base + 0x34, 12, 3); + clks[IMX6SLL_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6); + clks[IMX6SLL_CLK_LCDIF_PRED] = imx_clk_divider("lcdif_pred", "lcdif_pre_sel", base + 0x38, 12, 3); + + clks[IMX6SLL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); + clks[IMX6SLL_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); + clks[IMX6SLL_CLK_AXI_PODF] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0); + clks[IMX6SLL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); + + clks[IMX6SLL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clks[IMX6SLL_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7); + clks[IMX6SLL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clks[IMX6SLL_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7); + + clks[IMX6SLL_CLK_LDB_DI0_SEL] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels)); + clks[IMX6SLL_CLK_LDB_DI1_SEL] = imx_clk_mux("ldb_di1_sel", base + 0x1c, 7, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels)); + clks[IMX6SLL_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels)); + clks[IMX6SLL_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux("ldb_di1_div_sel", base + 0x20, 10, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels)); + + /* CCGR0 */ + clks[IMX6SLL_CLK_AIPSTZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0); + clks[IMX6SLL_CLK_AIPSTZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2); + clks[IMX6SLL_CLK_DCP] = imx_clk_gate2("dcp", "ahb", base + 0x68, 10); + clks[IMX6SLL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28); + clks[IMX6SLL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28); + + /* CCGR1 */ + clks[IMX6SLL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); + clks[IMX6SLL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2); + clks[IMX6SLL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4); + clks[IMX6SLL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6); + clks[IMX6SLL_CLK_UART3_IPG] = imx_clk_gate2("uart3_ipg", "ipg", base + 0x6c, 10); + clks[IMX6SLL_CLK_UART3_SERIAL] = imx_clk_gate2("uart3_serial", "uart_podf", base + 0x6c, 10); + clks[IMX6SLL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); + clks[IMX6SLL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); + clks[IMX6SLL_CLK_GPT_BUS] = imx_clk_gate2("gpt1_bus", "perclk", base + 0x6c, 20); + clks[IMX6SLL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt1_serial", "perclk", base + 0x6c, 22); + clks[IMX6SLL_CLK_UART4_IPG] = imx_clk_gate2("uart4_ipg", "ipg", base + 0x6c, 24); + clks[IMX6SLL_CLK_UART4_SERIAL] = imx_clk_gate2("uart4_serail", "uart_podf", base + 0x6c, 24); + + /* CCGR2 */ + clks[IMX6SLL_CLK_CSI] = imx_clk_gate2("csi", "axi", base + 0x70, 2); + clks[IMX6SLL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); + clks[IMX6SLL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); + clks[IMX6SLL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); + clks[IMX6SLL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); + clks[IMX6SLL_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "axi", base + 0x70, 28); + clks[IMX6SLL_CLK_PXP] = imx_clk_gate2("pxp", "axi", base + 0x70, 30); + + /* CCGR3 */ + clks[IMX6SLL_CLK_UART5_IPG] = imx_clk_gate2("uart5_ipg", "ipg", base + 0x74, 2); + clks[IMX6SLL_CLK_UART5_SERIAL] = imx_clk_gate2("uart5_serial", "uart_podf", base + 0x74, 2); + clks[IMX6SLL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_aclk", "axi", base + 0x74, 4); + clks[IMX6SLL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_podf", base + 0x74, 4); + clks[IMX6SLL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10); + clks[IMX6SLL_CLK_WDOG1] = imx_clk_gate2("wdog1", "ipg", base + 0x74, 16); + clks[IMX6SLL_CLK_MMDC_P0_FAST] = imx_clk_gate("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20); + clks[IMX6SLL_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24); + clks[IMX6SLL_CLK_OCRAM] = imx_clk_gate("ocram", "ahb", base + 0x74, 28); + + /* CCGR4 */ + clks[IMX6SLL_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); + clks[IMX6SLL_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); + clks[IMX6SLL_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); + clks[IMX6SLL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); + + /* CCGR5 */ + clks[IMX6SLL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); + clks[IMX6SLL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); + clks[IMX6SLL_CLK_WDOG2] = imx_clk_gate2("wdog2", "ipg", base + 0x7c, 10); + clks[IMX6SLL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); + clks[IMX6SLL_CLK_EXTERN_AUDIO] = imx_clk_gate2_shared("extern_audio", "extern_audio_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SPDIF_GCLK] = imx_clk_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_audio); + clks[IMX6SLL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SLL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); + clks[IMX6SLL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SLL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); + clks[IMX6SLL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); + clks[IMX6SLL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); + clks[IMX6SLL_CLK_UART1_IPG] = imx_clk_gate2("uart1_ipg", "ipg", base + 0x7c, 24); + clks[IMX6SLL_CLK_UART1_SERIAL] = imx_clk_gate2("uart1_serial", "uart_podf", base + 0x7c, 24); + + /* CCGR6 */ + clks[IMX6SLL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); + clks[IMX6SLL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); + clks[IMX6SLL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); + clks[IMX6SLL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); + + /* mask handshake of mmdc */ + writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR); + + for (i = 0; i < ARRAY_SIZE(clks); i++) + if (IS_ERR(clks[i])) + pr_err("i.MX6SLL clk %d: register failed with %ld\n", i, PTR_ERR(clks[i])); + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + /* set perclk to from OSC */ + clk_set_parent(clks[IMX6SLL_CLK_PERCLK_SEL], clks[IMX6SLL_CLK_OSC]); + + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clks[clks_init_on[i]]); + + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { + clk_prepare_enable(clks[IMX6SLL_CLK_USBPHY1_GATE]); + clk_prepare_enable(clks[IMX6SLL_CLK_USBPHY2_GATE]); + } + + /* Lower the AHB clock rate before changing the clock source. */ + clk_set_rate(clks[IMX6SLL_CLK_AHB], 99000000); + + /* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */ + clk_set_parent(clks[IMX6SLL_CLK_PERIPH_CLK2_SEL], clks[IMX6SLL_CLK_PLL3_USB_OTG]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_CLK2]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH_PRE], clks[IMX6SLL_CLK_PLL2_BUS]); + clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_PRE]); + + clk_set_rate(clks[IMX6SLL_CLK_AHB], 132000000); +} + +CLK_OF_DECLARE(imx6sll, "fsl,imx6sll-ccm", imx6sll_clocks_init); + diff --git a/include/dt-bindings/clock/imx6sll-clock.h b/include/dt-bindings/clock/imx6sll-clock.h new file mode 100644 index 0000000..39c2567 --- /dev/null +++ b/include/dt-bindings/clock/imx6sll-clock.h @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX6SLL_H +#define __DT_BINDINGS_CLOCK_IMX6SLL_H + +#define IMX6SLL_CLK_DUMMY 0 +#define IMX6SLL_CLK_CKIL 1 +#define IMX6SLL_CLK_OSC 2 +#define IMX6SLL_PLL1_BYPASS_SRC 3 +#define IMX6SLL_PLL2_BYPASS_SRC 4 +#define IMX6SLL_PLL3_BYPASS_SRC 5 +#define IMX6SLL_PLL4_BYPASS_SRC 6 +#define IMX6SLL_PLL5_BYPASS_SRC 7 +#define IMX6SLL_PLL6_BYPASS_SRC 8 +#define IMX6SLL_PLL7_BYPASS_SRC 9 +#define IMX6SLL_CLK_PLL1 10 +#define IMX6SLL_CLK_PLL2 11 +#define IMX6SLL_CLK_PLL3 12 +#define IMX6SLL_CLK_PLL4 13 +#define IMX6SLL_CLK_PLL5 14 +#define IMX6SLL_CLK_PLL6 15 +#define IMX6SLL_CLK_PLL7 16 +#define IMX6SLL_PLL1_BYPASS 17 +#define IMX6SLL_PLL2_BYPASS 18 +#define IMX6SLL_PLL3_BYPASS 19 +#define IMX6SLL_PLL4_BYPASS 20 +#define IMX6SLL_PLL5_BYPASS 21 +#define IMX6SLL_PLL6_BYPASS 22 +#define IMX6SLL_PLL7_BYPASS 23 +#define IMX6SLL_CLK_PLL1_SYS 24 +#define IMX6SLL_CLK_PLL2_BUS 25 +#define IMX6SLL_CLK_PLL3_USB_OTG 26 +#define IMX6SLL_CLK_PLL4_AUDIO 27 +#define IMX6SLL_CLK_PLL5_VIDEO 28 +#define IMX6SLL_CLK_PLL6_ENET 29 +#define IMX6SLL_CLK_PLL7_USB_HOST 30 +#define IMX6SLL_CLK_USBPHY1 31 +#define IMX6SLL_CLK_USBPHY2 32 +#define IMX6SLL_CLK_USBPHY1_GATE 33 +#define IMX6SLL_CLK_USBPHY2_GATE 34 +#define IMX6SLL_CLK_PLL2_PFD0 35 +#define IMX6SLL_CLK_PLL2_PFD1 36 +#define IMX6SLL_CLK_PLL2_PFD2 37 +#define IMX6SLL_CLK_PLL2_PFD3 38 +#define IMX6SLL_CLK_PLL3_PFD0 39 +#define IMX6SLL_CLK_PLL3_PFD1 40 +#define IMX6SLL_CLK_PLL3_PFD2 41 +#define IMX6SLL_CLK_PLL3_PFD3 42 +#define IMX6SLL_CLK_PLL4_POST_DIV 43 +#define IMX6SLL_CLK_PLL4_AUDIO_DIV 44 +#define IMX6SLL_CLK_PLL5_POST_DIV 45 +#define IMX6SLL_CLK_PLL5_VIDEO_DIV 46 +#define IMX6SLL_CLK_PLL2_198M 47 +#define IMX6SLL_CLK_PLL3_120M 48 +#define IMX6SLL_CLK_PLL3_80M 49 +#define IMX6SLL_CLK_PLL3_60M 50 +#define IMX6SLL_CLK_STEP 51 +#define IMX6SLL_CLK_PLL1_SW 52 +#define IMX6SLL_CLK_AXI_ALT_SEL 53 +#define IMX6SLL_CLK_AXI_SEL 54 +#define IMX6SLL_CLK_PERIPH_PRE 55 +#define IMX6SLL_CLK_PERIPH2_PRE 56 +#define IMX6SLL_CLK_PERIPH_CLK2_SEL 57 +#define IMX6SLL_CLK_PERIPH2_CLK2_SEL 58 +#define IMX6SLL_CLK_PERCLK_SEL 59 +#define IMX6SLL_CLK_USDHC1_SEL 60 +#define IMX6SLL_CLK_USDHC2_SEL 61 +#define IMX6SLL_CLK_USDHC3_SEL 62 +#define IMX6SLL_CLK_SSI1_SEL 63 +#define IMX6SLL_CLK_SSI2_SEL 64 +#define IMX6SLL_CLK_SSI3_SEL 65 +#define IMX6SLL_CLK_PXP_SEL 66 +#define IMX6SLL_CLK_LCDIF_PRE_SEL 67 +#define IMX6SLL_CLK_LCDIF_SEL 68 +#define IMX6SLL_CLK_EPDC_PRE_SEL 69 +#define IMX6SLL_CLK_SPDIF_SEL 70 +#define IMX6SLL_CLK_ECSPI_SEL 71 +#define IMX6SLL_CLK_UART_SEL 72 +#define IMX6SLL_CLK_ARM 73 +#define IMX6SLL_CLK_PERIPH 74 +#define IMX6SLL_CLK_PERIPH2 75 +#define IMX6SLL_CLK_PERIPH2_CLK2 76 +#define IMX6SLL_CLK_PERIPH_CLK2 77 +#define IMX6SLL_CLK_MMDC_PODF 78 +#define IMX6SLL_CLK_AXI_PODF 79 +#define IMX6SLL_CLK_AHB 80 +#define IMX6SLL_CLK_IPG 81 +#define IMX6SLL_CLK_PERCLK 82 +#define IMX6SLL_CLK_USDHC1_PODF 83 +#define IMX6SLL_CLK_USDHC2_PODF 84 +#define IMX6SLL_CLK_USDHC3_PODF 85 +#define IMX6SLL_CLK_SSI1_PRED 86 +#define IMX6SLL_CLK_SSI2_PRED 87 +#define IMX6SLL_CLK_SSI3_PRED 88 +#define IMX6SLL_CLK_SSI1_PODF 89 +#define IMX6SLL_CLK_SSI2_PODF 90 +#define IMX6SLL_CLK_SSI3_PODF 91 +#define IMX6SLL_CLK_PXP_PODF 92 +#define IMX6SLL_CLK_LCDIF_PRED 93 +#define IMX6SLL_CLK_LCDIF_PODF 94 +#define IMX6SLL_CLK_EPDC_SEL 95 +#define IMX6SLL_CLK_EPDC_PODF 96 +#define IMX6SLL_CLK_SPDIF_PRED 97 +#define IMX6SLL_CLK_SPDIF_PODF 98 +#define IMX6SLL_CLK_ECSPI_PODF 99 +#define IMX6SLL_CLK_UART_PODF 100 + +/* CCGR 0 */ +#define IMX6SLL_CLK_AIPSTZ1 101 +#define IMX6SLL_CLK_AIPSTZ2 102 +#define IMX6SLL_CLK_DCP 103 +#define IMX6SLL_CLK_UART2_IPG 104 +#define IMX6SLL_CLK_UART2_SERIAL 105 + +/* CCGR 1 */ +#define IMX6SLL_CLK_ECSPI1 106 +#define IMX6SLL_CLK_ECSPI2 107 +#define IMX6SLL_CLK_ECSPI3 108 +#define IMX6SLL_CLK_ECSPI4 109 +#define IMX6SLL_CLK_UART3_IPG 110 +#define IMX6SLL_CLK_UART3_SERIAL 111 +#define IMX6SLL_CLK_UART4_IPG 112 +#define IMX6SLL_CLK_UART4_SERIAL 113 +#define IMX6SLL_CLK_EPIT1 114 +#define IMX6SLL_CLK_EPIT2 115 +#define IMX6SLL_CLK_GPT_BUS 116 +#define IMX6SLL_CLK_GPT_SERIAL 117 + +/* CCGR2 */ +#define IMX6SLL_CLK_CSI 118 +#define IMX6SLL_CLK_I2C1 119 +#define IMX6SLL_CLK_I2C2 120 +#define IMX6SLL_CLK_I2C3 121 +#define IMX6SLL_CLK_OCOTP 122 +#define IMX6SLL_CLK_LCDIF_APB 123 +#define IMX6SLL_CLK_PXP 124 + +/* CCGR3 */ +#define IMX6SLL_CLK_UART5_IPG 125 +#define IMX6SLL_CLK_UART5_SERIAL 126 +#define IMX6SLL_CLK_EPDC_AXI 127 +#define IMX6SLL_CLK_EPDC_PIX 128 +#define IMX6SLL_CLK_LCDIF_PIX 129 +#define IMX6SLL_CLK_WDOG1 130 +#define IMX6SLL_CLK_MMDC_P0_FAST 131 +#define IMX6SLL_CLK_MMDC_P0_IPG 132 +#define IMX6SLL_CLK_OCRAM 133 + +/* CCGR4 */ +#define IMX6SLL_CLK_PWM1 134 +#define IMX6SLL_CLK_PWM2 135 +#define IMX6SLL_CLK_PWM3 136 +#define IMX6SLL_CLK_PWM4 137 + +/* CCGR 5 */ +#define IMX6SLL_CLK_ROM 138 +#define IMX6SLL_CLK_SDMA 139 +#define IMX6SLL_CLK_KPP 140 +#define IMX6SLL_CLK_WDOG2 141 +#define IMX6SLL_CLK_SPBA 142 +#define IMX6SLL_CLK_SPDIF 143 +#define IMX6SLL_CLK_SPDIF_GCLK 144 +#define IMX6SLL_CLK_SSI1 145 +#define IMX6SLL_CLK_SSI1_IPG 146 +#define IMX6SLL_CLK_SSI2 147 +#define IMX6SLL_CLK_SSI2_IPG 148 +#define IMX6SLL_CLK_SSI3 149 +#define IMX6SLL_CLK_SSI3_IPG 150 +#define IMX6SLL_CLK_UART1_IPG 151 +#define IMX6SLL_CLK_UART1_SERIAL 152 + +/* CCGR 6 */ +#define IMX6SLL_CLK_USBOH3 153 +#define IMX6SLL_CLK_USDHC1 154 +#define IMX6SLL_CLK_USDHC2 155 +#define IMX6SLL_CLK_USDHC3 156 + +#define IMX6SLL_CLK_IPP_DI0 157 +#define IMX6SLL_CLK_IPP_DI1 158 +#define IMX6SLL_CLK_LDB_DI0_SEL 159 +#define IMX6SLL_CLK_LDB_DI0_DIV_3_5 160 +#define IMX6SLL_CLK_LDB_DI0_DIV_7 161 +#define IMX6SLL_CLK_LDB_DI0_DIV_SEL 162 +#define IMX6SLL_CLK_LDB_DI0 163 +#define IMX6SLL_CLK_LDB_DI1_SEL 164 +#define IMX6SLL_CLK_LDB_DI1_DIV_3_5 165 +#define IMX6SLL_CLK_LDB_DI1_DIV_7 166 +#define IMX6SLL_CLK_LDB_DI1_DIV_SEL 167 +#define IMX6SLL_CLK_LDB_DI1 168 +#define IMX6SLL_CLK_EXTERN_AUDIO_SEL 169 +#define IMX6SLL_CLK_EXTERN_AUDIO_PRED 170 +#define IMX6SLL_CLK_EXTERN_AUDIO_PODF 171 +#define IMX6SLL_CLK_EXTERN_AUDIO 172 + +#define IMX6SLL_CLK_END 173 + +#endif /* __DT_BINDINGS_CLOCK_IMX6SLL_H */ -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll 2016-12-02 6:39 ` Bai Ping @ 2016-12-08 22:52 ` Stephen Boyd -1 siblings, 0 replies; 60+ messages in thread From: Stephen Boyd @ 2016-12-08 22:52 UTC (permalink / raw) To: Bai Ping Cc: shawnguo, mturquette, robh+dt, mark.rutland, linus.walleij, kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel On 12/02, Bai Ping wrote: > diff --git a/drivers/clk/imx/clk-imx6sll.c b/drivers/clk/imx/clk-imx6sll.c > new file mode 100644 > index 0000000..c5219e1 > --- /dev/null > +++ b/drivers/clk/imx/clk-imx6sll.c > @@ -0,0 +1,366 @@ > +/* > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +#include <dt-bindings/clock/imx6sll-clock.h> > +#include <linux/clk.h> > +#include <linux/clkdev.h> Is this include used? > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_irq.h> > +#include <linux/types.h> Is there an include of clk_provider.h missing? > + > +#include "clk.h" > + > +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) > +#define CCDR 0x4 > + > +static const char *pll_bypass_src_sels[] = { "osc", "dummy", }; const char * const? For all of these names. > +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; > +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; > +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; > +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; > +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; > +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; > +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; > +static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; > +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; > +static const char *axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", }; > +static const char *axi_sels[] = {"periph", "axi_alt_sel", }; > +static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; > +static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", }; > +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; > +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; > +static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; > +static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; > +static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; > +static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", "dummy",}; > +static const char *spdif_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; > +static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", }; > +static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", }; > +static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", }; > +static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; > +static const char *lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; > +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; > +static const char *uart_sels[] = { "pll3_80m", "osc", }; > +static const char *perclk_sels[] = { "ipg", "osc", }; > +static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > + > +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; > +static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > + > +static struct clk *clks[IMX6SLL_CLK_END]; > +static struct clk_onecell_data clk_data; > + > +static int const clks_init_on[] __initconst = { static const int is more preferred style. > + IMX6SLL_CLK_AIPSTZ1, IMX6SLL_CLK_AIPSTZ2, > + IMX6SLL_CLK_OCRAM, IMX6SLL_CLK_ARM, IMX6SLL_CLK_ROM, > + IMX6SLL_CLK_MMDC_P0_FAST, IMX6SLL_CLK_MMDC_P0_IPG, > +}; > + > +static struct clk_div_table post_div_table[] = { const? > + { .val = 2, .div = 1, }, > + { .val = 1, .div = 2, }, > + { .val = 0, .div = 4, }, > + { } > +}; > + > +static struct clk_div_table video_div_table[] = { const? > + { .val = 0, .div = 1, }, > + { .val = 1, .div = 2, }, > + { .val = 2, .div = 1, }, > + { .val = 3, .div = 4, }, > + { } > +}; > + > +static u32 share_count_audio; > +static u32 share_count_ssi1; > +static u32 share_count_ssi2; > +static u32 share_count_ssi3; > + > +static void __init imx6sll_clocks_init(struct device_node *ccm_node) > +{ > + struct device_node *np; > + void __iomem *base; > + int i; > + > + clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); > + > + clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); > + clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); > + > + /* ipp_di clock is external input */ > + clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); > + clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); > + > + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop"); > + base = of_iomap(np, 0); > + WARN_ON(!base); > + > + clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + > + clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); > + clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); > + clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); > + clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); > + clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); > + clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); > + clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); > + > + clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); > + > + /* Do not bypass PLLs initially */ > + clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]); > + clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]); > + clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]); > + clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]); > + clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]); > + clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]); > + clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]); Can we just put raw register writes here instead? I'd prefer we didn't use clk consumer APIs to do things to the clk tree from the providers. The problem there being that: 1) We're trying to move away from using consumer APIs in provider drivers. It's ok if they're used during probe, but inside clk_ops is not preferred. 2) Even if you have a clk pointer, it may be "orphaned" at the time of registration and so calling the APIs here works now but eventually we may want to return an EPROBE_DEFER error in that case and this may block that effort. I suppose if this is the only clk driver on this machine then this last point isn't a concern and things are probably ok here. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll @ 2016-12-08 22:52 ` Stephen Boyd 0 siblings, 0 replies; 60+ messages in thread From: Stephen Boyd @ 2016-12-08 22:52 UTC (permalink / raw) To: linux-arm-kernel On 12/02, Bai Ping wrote: > diff --git a/drivers/clk/imx/clk-imx6sll.c b/drivers/clk/imx/clk-imx6sll.c > new file mode 100644 > index 0000000..c5219e1 > --- /dev/null > +++ b/drivers/clk/imx/clk-imx6sll.c > @@ -0,0 +1,366 @@ > +/* > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +#include <dt-bindings/clock/imx6sll-clock.h> > +#include <linux/clk.h> > +#include <linux/clkdev.h> Is this include used? > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_irq.h> > +#include <linux/types.h> Is there an include of clk_provider.h missing? > + > +#include "clk.h" > + > +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) > +#define CCDR 0x4 > + > +static const char *pll_bypass_src_sels[] = { "osc", "dummy", }; const char * const? For all of these names. > +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; > +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; > +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; > +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; > +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; > +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; > +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; > +static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; > +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; > +static const char *axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", }; > +static const char *axi_sels[] = {"periph", "axi_alt_sel", }; > +static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; > +static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", }; > +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; > +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; > +static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; > +static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; > +static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; > +static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", "dummy",}; > +static const char *spdif_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; > +static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", }; > +static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", }; > +static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", }; > +static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; > +static const char *lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; > +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; > +static const char *uart_sels[] = { "pll3_80m", "osc", }; > +static const char *perclk_sels[] = { "ipg", "osc", }; > +static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > + > +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; > +static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > + > +static struct clk *clks[IMX6SLL_CLK_END]; > +static struct clk_onecell_data clk_data; > + > +static int const clks_init_on[] __initconst = { static const int is more preferred style. > + IMX6SLL_CLK_AIPSTZ1, IMX6SLL_CLK_AIPSTZ2, > + IMX6SLL_CLK_OCRAM, IMX6SLL_CLK_ARM, IMX6SLL_CLK_ROM, > + IMX6SLL_CLK_MMDC_P0_FAST, IMX6SLL_CLK_MMDC_P0_IPG, > +}; > + > +static struct clk_div_table post_div_table[] = { const? > + { .val = 2, .div = 1, }, > + { .val = 1, .div = 2, }, > + { .val = 0, .div = 4, }, > + { } > +}; > + > +static struct clk_div_table video_div_table[] = { const? > + { .val = 0, .div = 1, }, > + { .val = 1, .div = 2, }, > + { .val = 2, .div = 1, }, > + { .val = 3, .div = 4, }, > + { } > +}; > + > +static u32 share_count_audio; > +static u32 share_count_ssi1; > +static u32 share_count_ssi2; > +static u32 share_count_ssi3; > + > +static void __init imx6sll_clocks_init(struct device_node *ccm_node) > +{ > + struct device_node *np; > + void __iomem *base; > + int i; > + > + clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); > + > + clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); > + clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); > + > + /* ipp_di clock is external input */ > + clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); > + clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); > + > + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop"); > + base = of_iomap(np, 0); > + WARN_ON(!base); > + > + clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > + > + clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); > + clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); > + clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); > + clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); > + clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); > + clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); > + clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); > + > + clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); > + clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); > + > + /* Do not bypass PLLs initially */ > + clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]); > + clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]); > + clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]); > + clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]); > + clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]); > + clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]); > + clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]); Can we just put raw register writes here instead? I'd prefer we didn't use clk consumer APIs to do things to the clk tree from the providers. The problem there being that: 1) We're trying to move away from using consumer APIs in provider drivers. It's ok if they're used during probe, but inside clk_ops is not preferred. 2) Even if you have a clk pointer, it may be "orphaned" at the time of registration and so calling the APIs here works now but eventually we may want to return an EPROBE_DEFER error in that case and this may block that effort. I suppose if this is the only clk driver on this machine then this last point isn't a concern and things are probably ok here. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll 2016-12-08 22:52 ` Stephen Boyd (?) @ 2016-12-12 2:58 ` Jacky Bai -1 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-12 2:58 UTC (permalink / raw) To: Stephen Boyd Cc: mark.rutland, devicetree, p.zabel, mturquette, daniel.lezcano, linux-clk, linux-gpio, robh+dt, kernel, jacky.baip, Fabio Estevam, tglx, shawnguo, linus.walleij, linux-arm-kernel > Subject: Re: [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll > > On 12/02, Bai Ping wrote: > > diff --git a/drivers/clk/imx/clk-imx6sll.c > > b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index > > 0000000..c5219e1 > > --- /dev/null > > +++ b/drivers/clk/imx/clk-imx6sll.c > > @@ -0,0 +1,366 @@ > > +/* > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 or later at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +#include <dt-bindings/clock/imx6sll-clock.h> > > +#include <linux/clk.h> > > +#include <linux/clkdev.h> > > Is this include used? > It seems no use, I will remove it in V2. > > +#include <linux/err.h> > > +#include <linux/init.h> > > +#include <linux/io.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/of_irq.h> > > +#include <linux/types.h> > > Is there an include of clk_provider.h missing? > clk_provider.h is included in below "clk.h". > > + > > +#include "clk.h" > > + > > +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) > > +#define CCDR 0x4 > > + > > +static const char *pll_bypass_src_sels[] = { "osc", "dummy", }; > > const char * const? For all of these names. > ok, I will fix in V2. > > +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", > > +}; static const char *pll2_bypass_sels[] = { "pll2", > > +"pll2_bypass_src", }; static const char *pll3_bypass_sels[] = { > > +"pll3", "pll3_bypass_src", }; static const char *pll4_bypass_sels[] = > > +{ "pll4", "pll4_bypass_src", }; static const char *pll5_bypass_sels[] > > += { "pll5", "pll5_bypass_src", }; static const char > > +*pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; static const > > +char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; static > > +const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const > > +char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char > > +*axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", }; static > > +const char *axi_sels[] = {"periph", "axi_alt_sel", }; static const > > +char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", > > +"pll2_pfd0_352m", "pll2_198m", }; static const char > > +*periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", > > +"pll2_pfd0_352m", "pll4_audio_div", }; static const char > > +*periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; static const > > +char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; static const > > +char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const > > +char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static > > +const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; > > +static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m", > > +"pll4_audio_div", "dummy",}; static const char *spdif_sels[] = { > > +"pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", > > +}; static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", > > +"ldb_di0_div_7", }; static const char *ldb_di1_div_sels[] = { > > +"ldb_di1_div_3_5", "ldb_di1_div_7", }; static const char > > +*ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", > > +"pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", > > +"pll3_pfd3_454m", }; static const char *ldb_di1_sels[] = { > > +"pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", > > +"pll3_pfd3_454m", "pll3_pfd2_508m", }; static const char > > +*lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", > > +"pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; static const > > +char *ecspi_sels[] = { "pll3_60m", "osc", }; static const char > > +*uart_sels[] = { "pll3_80m", "osc", }; static const char > > +*perclk_sels[] = { "ipg", "osc", }; static const char *lcdif_sels[] = > > +{ "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > > + > > +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", > > +"pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", > > +"pll3_pfd2_508m", }; static const char *epdc_sels[] = { "epdc_podf", > > +"ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > > + > > +static struct clk *clks[IMX6SLL_CLK_END]; static struct > > +clk_onecell_data clk_data; > > + > > +static int const clks_init_on[] __initconst = { > > static const int is more preferred style. > ok, will fix in V2. > > + IMX6SLL_CLK_AIPSTZ1, IMX6SLL_CLK_AIPSTZ2, > > + IMX6SLL_CLK_OCRAM, IMX6SLL_CLK_ARM, IMX6SLL_CLK_ROM, > > + IMX6SLL_CLK_MMDC_P0_FAST, IMX6SLL_CLK_MMDC_P0_IPG, }; > > + > > +static struct clk_div_table post_div_table[] = { > > const? > ok, will fix in V2. > > + { .val = 2, .div = 1, }, > > + { .val = 1, .div = 2, }, > > + { .val = 0, .div = 4, }, > > + { } > > +}; > > + > > +static struct clk_div_table video_div_table[] = { > > const? > ok. will fix in V2. > > + { .val = 0, .div = 1, }, > > + { .val = 1, .div = 2, }, > > + { .val = 2, .div = 1, }, > > + { .val = 3, .div = 4, }, > > + { } > > +}; > > + > > +static u32 share_count_audio; > > +static u32 share_count_ssi1; > > +static u32 share_count_ssi2; > > +static u32 share_count_ssi3; > > + > > +static void __init imx6sll_clocks_init(struct device_node *ccm_node) > > +{ > > + struct device_node *np; > > + void __iomem *base; > > + int i; > > + > > + clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); > > + > > + clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); > > + clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); > > + > > + /* ipp_di clock is external input */ > > + clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, > "ipp_di0"); > > + clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, > "ipp_di1"); > > + > > + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop"); > > + base = of_iomap(np, 0); > > + WARN_ON(!base); > > + > > + clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", > base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", > base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", > base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", > base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", > base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", > base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", > base > > ++ 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + > > + clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", > "pll1_bypass_src", base + 0x00, 0x7f); > > + clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", > "pll2_bypass_src", base + 0x30, 0x1); > > + clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", > "pll3_bypass_src", base + 0x10, 0x3); > > + clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", > "pll4_bypass_src", base + 0x70, 0x7f); > > + clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", > "pll5_bypass_src", base + 0xa0, 0x7f); > > + clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", > "pll6_bypass_src", base + 0xe0, 0x3); > > + clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", > "pll7_bypass_src", base + 0x20, 0x3); > > + > > + clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base > + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base > + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base > + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base > + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base > + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base > + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base > + > > +0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), > > +CLK_SET_RATE_PARENT); > > + > > + /* Do not bypass PLLs initially */ > > + clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]); > > + clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]); > > + clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]); > > + clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]); > > + clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]); > > + clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]); > > + clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]); > > Can we just put raw register writes here instead? I'd prefer we didn't use clk > consumer APIs to do things to the clk tree from the providers. The problem > there being that: > > 1) We're trying to move away from using consumer APIs in provider drivers. > It's ok if they're used during probe, but inside clk_ops is not preferred. > > 2) Even if you have a clk pointer, it may be "orphaned" at the time of > registration and so calling the APIs here works now but eventually we may > want to return an EPROBE_DEFER error in that case and this may block that > effort. > > I suppose if this is the only clk driver on this machine then this last point isn't a > concern and things are probably ok here. > Using raw register writing has an issue. The register is modified, but it seems the clock 'parent-child' relationship can not match the register setting. The register setting is not bypass the pll, but in debug 'clk_summary', the pll is bypassed. BR > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux > Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll @ 2016-12-12 2:58 ` Jacky Bai 0 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-12 2:58 UTC (permalink / raw) To: linux-arm-kernel > Subject: Re: [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll > > On 12/02, Bai Ping wrote: > > diff --git a/drivers/clk/imx/clk-imx6sll.c > > b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index > > 0000000..c5219e1 > > --- /dev/null > > +++ b/drivers/clk/imx/clk-imx6sll.c > > @@ -0,0 +1,366 @@ > > +/* > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 or later at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +#include <dt-bindings/clock/imx6sll-clock.h> > > +#include <linux/clk.h> > > +#include <linux/clkdev.h> > > Is this include used? > It seems no use, I will remove it in V2. > > +#include <linux/err.h> > > +#include <linux/init.h> > > +#include <linux/io.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/of_irq.h> > > +#include <linux/types.h> > > Is there an include of clk_provider.h missing? > clk_provider.h is included in below "clk.h". > > + > > +#include "clk.h" > > + > > +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) > > +#define CCDR 0x4 > > + > > +static const char *pll_bypass_src_sels[] = { "osc", "dummy", }; > > const char * const? For all of these names. > ok, I will fix in V2. > > +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", > > +}; static const char *pll2_bypass_sels[] = { "pll2", > > +"pll2_bypass_src", }; static const char *pll3_bypass_sels[] = { > > +"pll3", "pll3_bypass_src", }; static const char *pll4_bypass_sels[] = > > +{ "pll4", "pll4_bypass_src", }; static const char *pll5_bypass_sels[] > > += { "pll5", "pll5_bypass_src", }; static const char > > +*pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; static const > > +char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; static > > +const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const > > +char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char > > +*axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", }; static > > +const char *axi_sels[] = {"periph", "axi_alt_sel", }; static const > > +char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", > > +"pll2_pfd0_352m", "pll2_198m", }; static const char > > +*periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", > > +"pll2_pfd0_352m", "pll4_audio_div", }; static const char > > +*periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; static const > > +char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; static const > > +char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const > > +char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static > > +const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; > > +static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m", > > +"pll4_audio_div", "dummy",}; static const char *spdif_sels[] = { > > +"pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", > > +}; static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", > > +"ldb_di0_div_7", }; static const char *ldb_di1_div_sels[] = { > > +"ldb_di1_div_3_5", "ldb_di1_div_7", }; static const char > > +*ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", > > +"pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", > > +"pll3_pfd3_454m", }; static const char *ldb_di1_sels[] = { > > +"pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", > > +"pll3_pfd3_454m", "pll3_pfd2_508m", }; static const char > > +*lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", > > +"pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; static const > > +char *ecspi_sels[] = { "pll3_60m", "osc", }; static const char > > +*uart_sels[] = { "pll3_80m", "osc", }; static const char > > +*perclk_sels[] = { "ipg", "osc", }; static const char *lcdif_sels[] = > > +{ "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > > + > > +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", > > +"pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", > > +"pll3_pfd2_508m", }; static const char *epdc_sels[] = { "epdc_podf", > > +"ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > > + > > +static struct clk *clks[IMX6SLL_CLK_END]; static struct > > +clk_onecell_data clk_data; > > + > > +static int const clks_init_on[] __initconst = { > > static const int is more preferred style. > ok, will fix in V2. > > + IMX6SLL_CLK_AIPSTZ1, IMX6SLL_CLK_AIPSTZ2, > > + IMX6SLL_CLK_OCRAM, IMX6SLL_CLK_ARM, IMX6SLL_CLK_ROM, > > + IMX6SLL_CLK_MMDC_P0_FAST, IMX6SLL_CLK_MMDC_P0_IPG, }; > > + > > +static struct clk_div_table post_div_table[] = { > > const? > ok, will fix in V2. > > + { .val = 2, .div = 1, }, > > + { .val = 1, .div = 2, }, > > + { .val = 0, .div = 4, }, > > + { } > > +}; > > + > > +static struct clk_div_table video_div_table[] = { > > const? > ok. will fix in V2. > > + { .val = 0, .div = 1, }, > > + { .val = 1, .div = 2, }, > > + { .val = 2, .div = 1, }, > > + { .val = 3, .div = 4, }, > > + { } > > +}; > > + > > +static u32 share_count_audio; > > +static u32 share_count_ssi1; > > +static u32 share_count_ssi2; > > +static u32 share_count_ssi3; > > + > > +static void __init imx6sll_clocks_init(struct device_node *ccm_node) > > +{ > > + struct device_node *np; > > + void __iomem *base; > > + int i; > > + > > + clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); > > + > > + clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); > > + clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); > > + > > + /* ipp_di clock is external input */ > > + clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, > "ipp_di0"); > > + clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, > "ipp_di1"); > > + > > + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop"); > > + base = of_iomap(np, 0); > > + WARN_ON(!base); > > + > > + clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", > base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", > base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", > base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", > base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", > base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", > base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", > base > > ++ 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + > > + clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", > "pll1_bypass_src", base + 0x00, 0x7f); > > + clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", > "pll2_bypass_src", base + 0x30, 0x1); > > + clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", > "pll3_bypass_src", base + 0x10, 0x3); > > + clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", > "pll4_bypass_src", base + 0x70, 0x7f); > > + clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", > "pll5_bypass_src", base + 0xa0, 0x7f); > > + clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", > "pll6_bypass_src", base + 0xe0, 0x3); > > + clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", > "pll7_bypass_src", base + 0x20, 0x3); > > + > > + clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base > + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base > + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base > + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base > + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base > + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base > + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base > + > > +0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), > > +CLK_SET_RATE_PARENT); > > + > > + /* Do not bypass PLLs initially */ > > + clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]); > > + clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]); > > + clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]); > > + clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]); > > + clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]); > > + clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]); > > + clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]); > > Can we just put raw register writes here instead? I'd prefer we didn't use clk > consumer APIs to do things to the clk tree from the providers. The problem > there being that: > > 1) We're trying to move away from using consumer APIs in provider drivers. > It's ok if they're used during probe, but inside clk_ops is not preferred. > > 2) Even if you have a clk pointer, it may be "orphaned" at the time of > registration and so calling the APIs here works now but eventually we may > want to return an EPROBE_DEFER error in that case and this may block that > effort. > > I suppose if this is the only clk driver on this machine then this last point isn't a > concern and things are probably ok here. > Using raw register writing has an issue. The register is modified, but it seems the clock 'parent-child' relationship can not match the register setting. The register setting is not bypass the pll, but in debug 'clk_summary', the pll is bypassed. BR > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux > Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll @ 2016-12-12 2:58 ` Jacky Bai 0 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-12 2:58 UTC (permalink / raw) To: Stephen Boyd Cc: shawnguo, mturquette, robh+dt, mark.rutland, linus.walleij, kernel, Fabio Estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, jacky.baip > Subject: Re: [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll >=20 > On 12/02, Bai Ping wrote: > > diff --git a/drivers/clk/imx/clk-imx6sll.c > > b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index > > 0000000..c5219e1 > > --- /dev/null > > +++ b/drivers/clk/imx/clk-imx6sll.c > > @@ -0,0 +1,366 @@ > > +/* > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 or later at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +#include <dt-bindings/clock/imx6sll-clock.h> > > +#include <linux/clk.h> > > +#include <linux/clkdev.h> >=20 > Is this include used? >=20 It seems no use, I will remove it in V2. > > +#include <linux/err.h> > > +#include <linux/init.h> > > +#include <linux/io.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/of_irq.h> > > +#include <linux/types.h> >=20 > Is there an include of clk_provider.h missing? >=20 clk_provider.h is included in below "clk.h". > > + > > +#include "clk.h" > > + > > +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) > > +#define CCDR 0x4 > > + > > +static const char *pll_bypass_src_sels[] =3D { "osc", "dummy", }; >=20 > const char * const? For all of these names. >=20 ok, I will fix in V2. > > +static const char *pll1_bypass_sels[] =3D { "pll1", "pll1_bypass_src", > > +}; static const char *pll2_bypass_sels[] =3D { "pll2", > > +"pll2_bypass_src", }; static const char *pll3_bypass_sels[] =3D { > > +"pll3", "pll3_bypass_src", }; static const char *pll4_bypass_sels[] = =3D > > +{ "pll4", "pll4_bypass_src", }; static const char *pll5_bypass_sels[] > > +=3D { "pll5", "pll5_bypass_src", }; static const char > > +*pll6_bypass_sels[] =3D { "pll6", "pll6_bypass_src", }; static const > > +char *pll7_bypass_sels[] =3D { "pll7", "pll7_bypass_src", }; static > > +const char *step_sels[] =3D { "osc", "pll2_pfd2_396m", }; static const > > +char *pll1_sw_sels[] =3D { "pll1_sys", "step", }; static const char > > +*axi_alt_sels[] =3D { "pll2_pfd2_396m", "pll3_pfd1_540m", }; static > > +const char *axi_sels[] =3D {"periph", "axi_alt_sel", }; static const > > +char *periph_pre_sels[] =3D { "pll2_bus", "pll2_pfd2_396m", > > +"pll2_pfd0_352m", "pll2_198m", }; static const char > > +*periph2_pre_sels[] =3D { "pll2_bus", "pll2_pfd2_396m", > > +"pll2_pfd0_352m", "pll4_audio_div", }; static const char > > +*periph_clk2_sels[] =3D { "pll3_usb_otg", "osc", "osc", }; static cons= t > > +char *periph2_clk2_sels[] =3D { "pll3_usb_otg", "osc", }; static const > > +char *periph_sels[] =3D { "periph_pre", "periph_clk2", }; static const > > +char *periph2_sels[] =3D { "periph2_pre", "periph2_clk2", }; static > > +const char *usdhc_sels[] =3D { "pll2_pfd2_396m", "pll2_pfd0_352m", }; > > +static const char *ssi_sels[] =3D {"pll3_pfd2_508m", "pll3_pfd3_454m", > > +"pll4_audio_div", "dummy",}; static const char *spdif_sels[] =3D { > > +"pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", > > +}; static const char *ldb_di0_div_sels[] =3D { "ldb_di0_div_3_5", > > +"ldb_di0_div_7", }; static const char *ldb_di1_div_sels[] =3D { > > +"ldb_di1_div_3_5", "ldb_di1_div_7", }; static const char > > +*ldb_di0_sels[] =3D { "pll5_video_div", "pll2_pfd0_352m", > > +"pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", > > +"pll3_pfd3_454m", }; static const char *ldb_di1_sels[] =3D { > > +"pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", > > +"pll3_pfd3_454m", "pll3_pfd2_508m", }; static const char > > +*lcdif_pre_sels[] =3D { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div"= , > > +"pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; static const > > +char *ecspi_sels[] =3D { "pll3_60m", "osc", }; static const char > > +*uart_sels[] =3D { "pll3_80m", "osc", }; static const char > > +*perclk_sels[] =3D { "ipg", "osc", }; static const char *lcdif_sels[] = =3D > > +{ "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > > + > > +static const char *epdc_pre_sels[] =3D { "pll2_bus", "pll3_usb_otg", > > +"pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", > > +"pll3_pfd2_508m", }; static const char *epdc_sels[] =3D { "epdc_podf", > > +"ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; > > + > > +static struct clk *clks[IMX6SLL_CLK_END]; static struct > > +clk_onecell_data clk_data; > > + > > +static int const clks_init_on[] __initconst =3D { >=20 > static const int is more preferred style. >=20 ok, will fix in V2. > > + IMX6SLL_CLK_AIPSTZ1, IMX6SLL_CLK_AIPSTZ2, > > + IMX6SLL_CLK_OCRAM, IMX6SLL_CLK_ARM, IMX6SLL_CLK_ROM, > > + IMX6SLL_CLK_MMDC_P0_FAST, IMX6SLL_CLK_MMDC_P0_IPG, }; > > + > > +static struct clk_div_table post_div_table[] =3D { >=20 > const? >=20 ok, will fix in V2. > > + { .val =3D 2, .div =3D 1, }, > > + { .val =3D 1, .div =3D 2, }, > > + { .val =3D 0, .div =3D 4, }, > > + { } > > +}; > > + > > +static struct clk_div_table video_div_table[] =3D { >=20 > const? >=20 ok. will fix in V2. > > + { .val =3D 0, .div =3D 1, }, > > + { .val =3D 1, .div =3D 2, }, > > + { .val =3D 2, .div =3D 1, }, > > + { .val =3D 3, .div =3D 4, }, > > + { } > > +}; > > + > > +static u32 share_count_audio; > > +static u32 share_count_ssi1; > > +static u32 share_count_ssi2; > > +static u32 share_count_ssi3; > > + > > +static void __init imx6sll_clocks_init(struct device_node *ccm_node) > > +{ > > + struct device_node *np; > > + void __iomem *base; > > + int i; > > + > > + clks[IMX6SLL_CLK_DUMMY] =3D imx_clk_fixed("dummy", 0); > > + > > + clks[IMX6SLL_CLK_CKIL] =3D of_clk_get_by_name(ccm_node, "ckil"); > > + clks[IMX6SLL_CLK_OSC] =3D of_clk_get_by_name(ccm_node, "osc"); > > + > > + /* ipp_di clock is external input */ > > + clks[IMX6SLL_CLK_IPP_DI0] =3D of_clk_get_by_name(ccm_node, > "ipp_di0"); > > + clks[IMX6SLL_CLK_IPP_DI1] =3D of_clk_get_by_name(ccm_node, > "ipp_di1"); > > + > > + np =3D of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop"); > > + base =3D of_iomap(np, 0); > > + WARN_ON(!base); > > + > > + clks[IMX6SLL_PLL1_BYPASS_SRC] =3D imx_clk_mux("pll1_bypass_src", > base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels))= ; > > + clks[IMX6SLL_PLL2_BYPASS_SRC] =3D imx_clk_mux("pll2_bypass_src", > base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels))= ; > > + clks[IMX6SLL_PLL3_BYPASS_SRC] =3D imx_clk_mux("pll3_bypass_src", > base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels))= ; > > + clks[IMX6SLL_PLL4_BYPASS_SRC] =3D imx_clk_mux("pll4_bypass_src", > base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels))= ; > > + clks[IMX6SLL_PLL5_BYPASS_SRC] =3D imx_clk_mux("pll5_bypass_src", > base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels))= ; > > + clks[IMX6SLL_PLL6_BYPASS_SRC] =3D imx_clk_mux("pll6_bypass_src", > base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels))= ; > > + clks[IMX6SLL_PLL7_BYPASS_SRC] =3D imx_clk_mux("pll7_bypass_src", > base > > ++ 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); > > + > > + clks[IMX6SLL_CLK_PLL1] =3D imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", > "pll1_bypass_src", base + 0x00, 0x7f); > > + clks[IMX6SLL_CLK_PLL2] =3D imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", > "pll2_bypass_src", base + 0x30, 0x1); > > + clks[IMX6SLL_CLK_PLL3] =3D imx_clk_pllv3(IMX_PLLV3_USB, "pll3", > "pll3_bypass_src", base + 0x10, 0x3); > > + clks[IMX6SLL_CLK_PLL4] =3D imx_clk_pllv3(IMX_PLLV3_AV, "pll4", > "pll4_bypass_src", base + 0x70, 0x7f); > > + clks[IMX6SLL_CLK_PLL5] =3D imx_clk_pllv3(IMX_PLLV3_AV, "pll5", > "pll5_bypass_src", base + 0xa0, 0x7f); > > + clks[IMX6SLL_CLK_PLL6] =3D imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", > "pll6_bypass_src", base + 0xe0, 0x3); > > + clks[IMX6SLL_CLK_PLL7] =3D imx_clk_pllv3(IMX_PLLV3_USB, "pll7", > "pll7_bypass_src", base + 0x20, 0x3); > > + > > + clks[IMX6SLL_PLL1_BYPASS] =3D imx_clk_mux_flags("pll1_bypass", base > + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL2_BYPASS] =3D imx_clk_mux_flags("pll2_bypass", base > + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL3_BYPASS] =3D imx_clk_mux_flags("pll3_bypass", base > + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL4_BYPASS] =3D imx_clk_mux_flags("pll4_bypass", base > + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL5_BYPASS] =3D imx_clk_mux_flags("pll5_bypass", base > + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL6_BYPASS] =3D imx_clk_mux_flags("pll6_bypass", base > + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), > CLK_SET_RATE_PARENT); > > + clks[IMX6SLL_PLL7_BYPASS] =3D imx_clk_mux_flags("pll7_bypass", base > + > > +0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), > > +CLK_SET_RATE_PARENT); > > + > > + /* Do not bypass PLLs initially */ > > + clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]); > > + clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]); > > + clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]); > > + clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]); > > + clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]); > > + clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]); > > + clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]); >=20 > Can we just put raw register writes here instead? I'd prefer we didn't us= e clk > consumer APIs to do things to the clk tree from the providers. The proble= m > there being that: >=20 > 1) We're trying to move away from using consumer APIs in provider drive= rs. > It's ok if they're used during probe, but inside clk_ops is not preferre= d. >=20 > 2) Even if you have a clk pointer, it may be "orphaned" at the time of > registration and so calling the APIs here works now but eventually we ma= y > want to return an EPROBE_DEFER error in that case and this may block tha= t > effort. >=20 > I suppose if this is the only clk driver on this machine then this last p= oint isn't a > concern and things are probably ok here. >=20 Using raw register writing has an issue. The register is modified, but it = seems the clock 'parent-child' relationship can=20 not match the register setting. The register setting is not bypass the pll,= but in debug 'clk_summary', the pll is bypassed. =20 BR > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linu= x > Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll 2016-12-12 2:58 ` Jacky Bai (?) @ 2016-12-13 23:28 ` Stephen Boyd -1 siblings, 0 replies; 60+ messages in thread From: Stephen Boyd @ 2016-12-13 23:28 UTC (permalink / raw) To: Jacky Bai Cc: shawnguo, mturquette, robh+dt, mark.rutland, linus.walleij, kernel, Fabio Estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, jacky.baip@gmail.com On 12/12, Jacky Bai wrote: > > On 12/02, Bai Ping wrote: > > > diff --git a/drivers/clk/imx/clk-imx6sll.c > > > b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index > > > 0000000..c5219e1 > > > --- /dev/null > > > +++ b/drivers/clk/imx/clk-imx6sll.c > > > +0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), > > > +CLK_SET_RATE_PARENT); > > > + > > > + /* Do not bypass PLLs initially */ > > > + clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]); > > > + clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]); > > > + clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]); > > > + clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]); > > > + clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]); > > > + clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]); > > > + clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]); > > > > Can we just put raw register writes here instead? I'd prefer we didn't use clk > > consumer APIs to do things to the clk tree from the providers. The problem > > there being that: > > > > 1) We're trying to move away from using consumer APIs in provider drivers. > > It's ok if they're used during probe, but inside clk_ops is not preferred. > > > > 2) Even if you have a clk pointer, it may be "orphaned" at the time of > > registration and so calling the APIs here works now but eventually we may > > want to return an EPROBE_DEFER error in that case and this may block that > > effort. > > > > I suppose if this is the only clk driver on this machine then this last point isn't a > > concern and things are probably ok here. > > > > Using raw register writing has an issue. The register is modified, but it seems the clock 'parent-child' relationship can > not match the register setting. The register setting is not bypass the pll, but in debug 'clk_summary', the > pll is bypassed. So program the register settings before registering the clocks with the framework? -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll @ 2016-12-13 23:28 ` Stephen Boyd 0 siblings, 0 replies; 60+ messages in thread From: Stephen Boyd @ 2016-12-13 23:28 UTC (permalink / raw) To: linux-arm-kernel On 12/12, Jacky Bai wrote: > > On 12/02, Bai Ping wrote: > > > diff --git a/drivers/clk/imx/clk-imx6sll.c > > > b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index > > > 0000000..c5219e1 > > > --- /dev/null > > > +++ b/drivers/clk/imx/clk-imx6sll.c > > > +0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), > > > +CLK_SET_RATE_PARENT); > > > + > > > + /* Do not bypass PLLs initially */ > > > + clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]); > > > + clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]); > > > + clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]); > > > + clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]); > > > + clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]); > > > + clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]); > > > + clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]); > > > > Can we just put raw register writes here instead? I'd prefer we didn't use clk > > consumer APIs to do things to the clk tree from the providers. The problem > > there being that: > > > > 1) We're trying to move away from using consumer APIs in provider drivers. > > It's ok if they're used during probe, but inside clk_ops is not preferred. > > > > 2) Even if you have a clk pointer, it may be "orphaned" at the time of > > registration and so calling the APIs here works now but eventually we may > > want to return an EPROBE_DEFER error in that case and this may block that > > effort. > > > > I suppose if this is the only clk driver on this machine then this last point isn't a > > concern and things are probably ok here. > > > > Using raw register writing has an issue. The register is modified, but it seems the clock 'parent-child' relationship can > not match the register setting. The register setting is not bypass the pll, but in debug 'clk_summary', the > pll is bypassed. So program the register settings before registering the clocks with the framework? -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll @ 2016-12-13 23:28 ` Stephen Boyd 0 siblings, 0 replies; 60+ messages in thread From: Stephen Boyd @ 2016-12-13 23:28 UTC (permalink / raw) To: Jacky Bai Cc: shawnguo, mturquette, robh+dt, mark.rutland, linus.walleij, kernel, Fabio Estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, jacky.baip On 12/12, Jacky Bai wrote: > > On 12/02, Bai Ping wrote: > > > diff --git a/drivers/clk/imx/clk-imx6sll.c > > > b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index > > > 0000000..c5219e1 > > > --- /dev/null > > > +++ b/drivers/clk/imx/clk-imx6sll.c > > > +0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), > > > +CLK_SET_RATE_PARENT); > > > + > > > + /* Do not bypass PLLs initially */ > > > + clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]); > > > + clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]); > > > + clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]); > > > + clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]); > > > + clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]); > > > + clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]); > > > + clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]); > > > > Can we just put raw register writes here instead? I'd prefer we didn't use clk > > consumer APIs to do things to the clk tree from the providers. The problem > > there being that: > > > > 1) We're trying to move away from using consumer APIs in provider drivers. > > It's ok if they're used during probe, but inside clk_ops is not preferred. > > > > 2) Even if you have a clk pointer, it may be "orphaned" at the time of > > registration and so calling the APIs here works now but eventually we may > > want to return an EPROBE_DEFER error in that case and this may block that > > effort. > > > > I suppose if this is the only clk driver on this machine then this last point isn't a > > concern and things are probably ok here. > > > > Using raw register writing has an issue. The register is modified, but it seems the clock 'parent-child' relationship can > not match the register setting. The register setting is not bypass the pll, but in debug 'clk_summary', the > pll is bypassed. So program the register settings before registering the clocks with the framework? -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 04/11] driver: pinctrl: imx: Add pinctrl driver support for imx6sll 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-02 6:39 ` Bai Ping -1 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: devicetree, kernel, daniel.lezcano, linux-gpio, p.zabel, fabio.estevam, tglx, linux-clk, linux-arm-kernel, ping.bai Add pinctrl driver support for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/Kconfig | 1 + drivers/pinctrl/freescale/Kconfig | 7 + drivers/pinctrl/freescale/Makefile | 1 + drivers/pinctrl/freescale/pinctrl-imx6sll.c | 385 ++++++++++++++++++++++++++++ 4 files changed, 394 insertions(+) create mode 100644 drivers/pinctrl/freescale/pinctrl-imx6sll.c diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 33bcfda..c907d9f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -514,6 +514,7 @@ config SOC_IMX6SL config SOC_IMX6SLL bool "i.MX6 SoloLiteLite support" + select PINCTRL_IMX6SLL select SOC_IMX6 help diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig index fc8cbf6..93ca39f 100644 --- a/drivers/pinctrl/freescale/Kconfig +++ b/drivers/pinctrl/freescale/Kconfig @@ -81,6 +81,13 @@ config PINCTRL_IMX6SL help Say Y here to enable the imx6sl pinctrl driver +config PINCTRL_IMX6SLL + bool "IMX6SL pinctrl driver" + depends on SOC_IMX6SLL + select PINCTRL_IMX + help + Say Y here to enable the imx6sl pinctrl driver + config PINCTRL_IMX6SX bool "IMX6SX pinctrl driver" depends on SOC_IMX6SX diff --git a/drivers/pinctrl/freescale/Makefile b/drivers/pinctrl/freescale/Makefile index d44c9e2..5f23765 100644 --- a/drivers/pinctrl/freescale/Makefile +++ b/drivers/pinctrl/freescale/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_PINCTRL_IMX53) += pinctrl-imx53.o obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6dl.o obj-$(CONFIG_PINCTRL_IMX6SL) += pinctrl-imx6sl.o +obj-$(CONFIG_PINCTRL_IMX6SLL) += pinctrl-imx6sll.o obj-$(CONFIG_PINCTRL_IMX6SX) += pinctrl-imx6sx.o obj-$(CONFIG_PINCTRL_IMX6UL) += pinctrl-imx6ul.o obj-$(CONFIG_PINCTRL_IMX7D) += pinctrl-imx7d.o diff --git a/drivers/pinctrl/freescale/pinctrl-imx6sll.c b/drivers/pinctrl/freescale/pinctrl-imx6sll.c new file mode 100644 index 0000000..2f4baff --- /dev/null +++ b/drivers/pinctrl/freescale/pinctrl-imx6sll.c @@ -0,0 +1,385 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Author: Bai Ping <ping.bai@nxp.com> + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-imx.h" + +enum imx6sll_pads { + MX6SLL_PAD_RESERVE0 = 0, + MX6SLL_PAD_RESERVE1 = 1, + MX6SLL_PAD_RESERVE2 = 2, + MX6SLL_PAD_RESERVE3 = 3, + MX6SLL_PAD_RESERVE4 = 4, + MX6SLL_PAD_WDOG_B = 5, + MX6SLL_PAD_REF_CLK_24M = 6, + MX6SLL_PAD_REF_CLK_32K = 7, + MX6SLL_PAD_PWM1 = 8, + MX6SLL_PAD_KEY_COL0 = 9, + MX6SLL_PAD_KEY_ROW0 = 10, + MX6SLL_PAD_KEY_COL1 = 11, + MX6SLL_PAD_KEY_ROW1 = 12, + MX6SLL_PAD_KEY_COL2 = 13, + MX6SLL_PAD_KEY_ROW2 = 14, + MX6SLL_PAD_KEY_COL3 = 15, + MX6SLL_PAD_KEY_ROW3 = 16, + MX6SLL_PAD_KEY_COL4 = 17, + MX6SLL_PAD_KEY_ROW4 = 18, + MX6SLL_PAD_KEY_COL5 = 19, + MX6SLL_PAD_KEY_ROW5 = 20, + MX6SLL_PAD_KEY_COL6 = 21, + MX6SLL_PAD_KEY_ROW6 = 22, + MX6SLL_PAD_KEY_COL7 = 23, + MX6SLL_PAD_KEY_ROW7 = 24, + MX6SLL_PAD_EPDC_DATA00 = 25, + MX6SLL_PAD_EPDC_DATA01 = 26, + MX6SLL_PAD_EPDC_DATA02 = 27, + MX6SLL_PAD_EPDC_DATA03 = 28, + MX6SLL_PAD_EPDC_DATA04 = 29, + MX6SLL_PAD_EPDC_DATA05 = 30, + MX6SLL_PAD_EPDC_DATA06 = 31, + MX6SLL_PAD_EPDC_DATA07 = 32, + MX6SLL_PAD_EPDC_DATA08 = 33, + MX6SLL_PAD_EPDC_DATA09 = 34, + MX6SLL_PAD_EPDC_DATA10 = 35, + MX6SLL_PAD_EPDC_DATA11 = 36, + MX6SLL_PAD_EPDC_DATA12 = 37, + MX6SLL_PAD_EPDC_DATA13 = 38, + MX6SLL_PAD_EPDC_DATA14 = 39, + MX6SLL_PAD_EPDC_DATA15 = 40, + MX6SLL_PAD_EPDC_SDCLK = 41, + MX6SLL_PAD_EPDC_SDLE = 42, + MX6SLL_PAD_EPDC_SDOE = 43, + MX6SLL_PAD_EPDC_SDSHR = 44, + MX6SLL_PAD_EPDC_SDCE0 = 45, + MX6SLL_PAD_EPDC_SDCE1 = 46, + MX6SLL_PAD_EPDC_SDCE2 = 47, + MX6SLL_PAD_EPDC_SDCE3 = 48, + MX6SLL_PAD_EPDC_GDCLK = 49, + MX6SLL_PAD_EPDC_GDOE = 50, + MX6SLL_PAD_EPDC_GDRL = 51, + MX6SLL_PAD_EPDC_GDSP = 52, + MX6SLL_PAD_EPDC_VCOM0 = 53, + MX6SLL_PAD_EPDC_VCOM1 = 54, + MX6SLL_PAD_EPDC_BDR0 = 55, + MX6SLL_PAD_EPDC_BDR1 = 56, + MX6SLL_PAD_EPDC_PWR_CTRL0 = 57, + MX6SLL_PAD_EPDC_PWR_CTRL1 = 58, + MX6SLL_PAD_EPDC_PWR_CTRL2 = 59, + MX6SLL_PAD_EPDC_PWR_CTRL3 = 60, + MX6SLL_PAD_EPDC_PWR_COM = 61, + MX6SLL_PAD_EPDC_PWR_INT = 62, + MX6SLL_PAD_EPDC_PWR_STAT = 63, + MX6SLL_PAD_EPDC_PWR_WAKE = 64, + MX6SLL_PAD_LCD_CLK = 65, + MX6SLL_PAD_LCD_ENABLE = 66, + MX6SLL_PAD_LCD_HSYNC = 67, + MX6SLL_PAD_LCD_VSYNC = 68, + MX6SLL_PAD_LCD_RESET = 69, + MX6SLL_PAD_LCD_DATA00 = 70, + MX6SLL_PAD_LCD_DATA01 = 71, + MX6SLL_PAD_LCD_DATA02 = 72, + MX6SLL_PAD_LCD_DATA03 = 73, + MX6SLL_PAD_LCD_DATA04 = 74, + MX6SLL_PAD_LCD_DATA05 = 75, + MX6SLL_PAD_LCD_DATA06 = 76, + MX6SLL_PAD_LCD_DATA07 = 77, + MX6SLL_PAD_LCD_DATA08 = 78, + MX6SLL_PAD_LCD_DATA09 = 79, + MX6SLL_PAD_LCD_DATA10 = 80, + MX6SLL_PAD_LCD_DATA11 = 81, + MX6SLL_PAD_LCD_DATA12 = 82, + MX6SLL_PAD_LCD_DATA13 = 83, + MX6SLL_PAD_LCD_DATA14 = 84, + MX6SLL_PAD_LCD_DATA15 = 85, + MX6SLL_PAD_LCD_DATA16 = 86, + MX6SLL_PAD_LCD_DATA17 = 87, + MX6SLL_PAD_LCD_DATA18 = 88, + MX6SLL_PAD_LCD_DATA19 = 89, + MX6SLL_PAD_LCD_DATA20 = 90, + MX6SLL_PAD_LCD_DATA21 = 91, + MX6SLL_PAD_LCD_DATA22 = 92, + MX6SLL_PAD_LCD_DATA23 = 93, + MX6SLL_PAD_AUD_RXFS = 94, + MX6SLL_PAD_AUD_RXC = 95, + MX6SLL_PAD_AUD_RXD = 96, + MX6SLL_PAD_AUD_TXC = 97, + MX6SLL_PAD_AUD_TXFS = 98, + MX6SLL_PAD_AUD_TXD = 99, + MX6SLL_PAD_AUD_MCLK = 100, + MX6SLL_PAD_UART1_RXD = 101, + MX6SLL_PAD_UART1_TXD = 102, + MX6SLL_PAD_I2C1_SCL = 103, + MX6SLL_PAD_I2C1_SDA = 104, + MX6SLL_PAD_I2C2_SCL = 105, + MX6SLL_PAD_I2C2_SDA = 106, + MX6SLL_PAD_ECSPI1_SCLK = 107, + MX6SLL_PAD_ECSPI1_MOSI = 108, + MX6SLL_PAD_ECSPI1_MISO = 109, + MX6SLL_PAD_ECSPI1_SS0 = 110, + MX6SLL_PAD_ECSPI2_SCLK = 111, + MX6SLL_PAD_ECSPI2_MOSI = 112, + MX6SLL_PAD_ECSPI2_MISO = 113, + MX6SLL_PAD_ECSPI2_SS0 = 114, + MX6SLL_PAD_SD1_CLK = 115, + MX6SLL_PAD_SD1_CMD = 116, + MX6SLL_PAD_SD1_DATA0 = 117, + MX6SLL_PAD_SD1_DATA1 = 118, + MX6SLL_PAD_SD1_DATA2 = 119, + MX6SLL_PAD_SD1_DATA3 = 120, + MX6SLL_PAD_SD1_DATA4 = 121, + MX6SLL_PAD_SD1_DATA5 = 122, + MX6SLL_PAD_SD1_DATA6 = 123, + MX6SLL_PAD_SD1_DATA7 = 124, + MX6SLL_PAD_SD2_RESET = 125, + MX6SLL_PAD_SD2_CLK = 126, + MX6SLL_PAD_SD2_CMD = 127, + MX6SLL_PAD_SD2_DATA0 = 128, + MX6SLL_PAD_SD2_DATA1 = 129, + MX6SLL_PAD_SD2_DATA2 = 130, + MX6SLL_PAD_SD2_DATA3 = 131, + MX6SLL_PAD_SD2_DATA4 = 132, + MX6SLL_PAD_SD2_DATA5 = 133, + MX6SLL_PAD_SD2_DATA6 = 134, + MX6SLL_PAD_SD2_DATA7 = 135, + MX6SLL_PAD_SD3_CLK = 136, + MX6SLL_PAD_SD3_CMD = 137, + MX6SLL_PAD_SD3_DATA0 = 138, + MX6SLL_PAD_SD3_DATA1 = 139, + MX6SLL_PAD_SD3_DATA2 = 140, + MX6SLL_PAD_SD3_DATA3 = 141, + MX6SLL_PAD_GPIO4_IO20 = 142, + MX6SLL_PAD_GPIO4_IO21 = 143, + MX6SLL_PAD_GPIO4_IO19 = 144, + MX6SLL_PAD_GPIO4_IO25 = 145, + MX6SLL_PAD_GPIO4_IO18 = 146, + MX6SLL_PAD_GPIO4_IO24 = 147, + MX6SLL_PAD_GPIO4_IO23 = 148, + MX6SLL_PAD_GPIO4_IO17 = 149, + MX6SLL_PAD_GPIO4_IO22 = 150, + MX6SLL_PAD_GPIO4_IO16 = 151, + MX6SLL_PAD_GPIO4_IO26 = 152, +}; + +enum imx6sll_lpsr_pads { + MX6SLL_PAD_SNVS_TAMPER = 0, + MX6SLL_PAD_SNVS_PMIC_ON_REQ = 1, + MX6SLL_PAD_SNVS_PMIC_STBY_REQ = 2, + MX6SLL_PAD_SNVS_BOOT_MODE0 = 3, + MX6SLL_PAD_SNVS_BOOT_MODE1 = 4, +}; + +/* Pad names for the pinmux subsystem */ +static const struct pinctrl_pin_desc imx6sll_pinctrl_pads[] = { + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE0), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE1), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE2), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE3), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE4), + IMX_PINCTRL_PIN(MX6SLL_PAD_WDOG_B), + IMX_PINCTRL_PIN(MX6SLL_PAD_REF_CLK_24M), + IMX_PINCTRL_PIN(MX6SLL_PAD_REF_CLK_32K), + IMX_PINCTRL_PIN(MX6SLL_PAD_PWM1), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL0), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW0), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL1), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW1), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL2), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW2), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL3), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW3), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL4), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW4), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL5), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW5), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL6), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW6), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL7), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW7), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA00), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA01), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA02), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA03), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA04), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA05), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA06), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA07), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA08), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA09), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA10), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA11), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA12), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA13), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA14), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA15), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDLE), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDOE), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDSHR), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE2), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE3), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDOE), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDRL), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDSP), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_VCOM0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_VCOM1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_BDR0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_BDR1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL2), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL3), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_COM), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_INT), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_STAT), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_WAKE), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_ENABLE), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_HSYNC), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_VSYNC), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_RESET), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA00), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA01), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA02), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA03), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA04), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA05), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA06), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA07), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA08), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA09), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA10), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA11), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA12), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA13), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA14), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA15), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA16), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA17), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA18), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA19), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA20), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA21), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA22), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA23), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXFS), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXC), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXC), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXFS), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_MCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_UART1_RXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_UART1_TXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C1_SCL), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C1_SDA), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C2_SCL), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C2_SDA), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_SCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_MOSI), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_MISO), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_SS0), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_SCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_MOSI), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_MISO), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_SS0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_CMD), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA1), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA2), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA3), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA4), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA5), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA6), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA7), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_RESET), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_CMD), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA1), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA2), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA3), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA4), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA5), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA6), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA7), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_CMD), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA1), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA2), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA3), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO20), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO21), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO19), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO25), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO18), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO24), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO23), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO17), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO22), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO16), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO26), +}; + +static struct imx_pinctrl_soc_info imx6sll_pinctrl_info = { + .pins = imx6sll_pinctrl_pads, + .npins = ARRAY_SIZE(imx6sll_pinctrl_pads), + .gpr_compatible = "fsl,imx6sll-iomuxc-gpr", +}; + +static const struct of_device_id imx6sll_pinctrl_of_match[] = { + { .compatible = "fsl,imx6sll-iomuxc", .data = &imx6sll_pinctrl_info, }, + { /* sentinel */ } +}; + +static int imx6sll_pinctrl_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct imx_pinctrl_soc_info *pinctrl_info; + + match = of_match_device(imx6sll_pinctrl_of_match, &pdev->dev); + + if (!match) + return -ENODEV; + + pinctrl_info = (struct imx_pinctrl_soc_info *) match->data; + + return imx_pinctrl_probe(pdev, pinctrl_info); +} + +static struct platform_driver imx6sll_pinctrl_driver = { + .driver = { + .name = "imx6sll-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(imx6sll_pinctrl_of_match), + }, + .probe = imx6sll_pinctrl_probe, +}; + +static int __init imx6sll_pinctrl_init(void) +{ + return platform_driver_register(&imx6sll_pinctrl_driver); +} +arch_initcall(imx6sll_pinctrl_init); + +static void __exit imx6sll_pinctrl_exit(void) +{ + platform_driver_unregister(&imx6sll_pinctrl_driver); +} +module_exit(imx6sll_pinctrl_exit); -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 04/11] driver: pinctrl: imx: Add pinctrl driver support for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: linux-arm-kernel Add pinctrl driver support for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/Kconfig | 1 + drivers/pinctrl/freescale/Kconfig | 7 + drivers/pinctrl/freescale/Makefile | 1 + drivers/pinctrl/freescale/pinctrl-imx6sll.c | 385 ++++++++++++++++++++++++++++ 4 files changed, 394 insertions(+) create mode 100644 drivers/pinctrl/freescale/pinctrl-imx6sll.c diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 33bcfda..c907d9f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -514,6 +514,7 @@ config SOC_IMX6SL config SOC_IMX6SLL bool "i.MX6 SoloLiteLite support" + select PINCTRL_IMX6SLL select SOC_IMX6 help diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig index fc8cbf6..93ca39f 100644 --- a/drivers/pinctrl/freescale/Kconfig +++ b/drivers/pinctrl/freescale/Kconfig @@ -81,6 +81,13 @@ config PINCTRL_IMX6SL help Say Y here to enable the imx6sl pinctrl driver +config PINCTRL_IMX6SLL + bool "IMX6SL pinctrl driver" + depends on SOC_IMX6SLL + select PINCTRL_IMX + help + Say Y here to enable the imx6sl pinctrl driver + config PINCTRL_IMX6SX bool "IMX6SX pinctrl driver" depends on SOC_IMX6SX diff --git a/drivers/pinctrl/freescale/Makefile b/drivers/pinctrl/freescale/Makefile index d44c9e2..5f23765 100644 --- a/drivers/pinctrl/freescale/Makefile +++ b/drivers/pinctrl/freescale/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_PINCTRL_IMX53) += pinctrl-imx53.o obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6dl.o obj-$(CONFIG_PINCTRL_IMX6SL) += pinctrl-imx6sl.o +obj-$(CONFIG_PINCTRL_IMX6SLL) += pinctrl-imx6sll.o obj-$(CONFIG_PINCTRL_IMX6SX) += pinctrl-imx6sx.o obj-$(CONFIG_PINCTRL_IMX6UL) += pinctrl-imx6ul.o obj-$(CONFIG_PINCTRL_IMX7D) += pinctrl-imx7d.o diff --git a/drivers/pinctrl/freescale/pinctrl-imx6sll.c b/drivers/pinctrl/freescale/pinctrl-imx6sll.c new file mode 100644 index 0000000..2f4baff --- /dev/null +++ b/drivers/pinctrl/freescale/pinctrl-imx6sll.c @@ -0,0 +1,385 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Author: Bai Ping <ping.bai@nxp.com> + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-imx.h" + +enum imx6sll_pads { + MX6SLL_PAD_RESERVE0 = 0, + MX6SLL_PAD_RESERVE1 = 1, + MX6SLL_PAD_RESERVE2 = 2, + MX6SLL_PAD_RESERVE3 = 3, + MX6SLL_PAD_RESERVE4 = 4, + MX6SLL_PAD_WDOG_B = 5, + MX6SLL_PAD_REF_CLK_24M = 6, + MX6SLL_PAD_REF_CLK_32K = 7, + MX6SLL_PAD_PWM1 = 8, + MX6SLL_PAD_KEY_COL0 = 9, + MX6SLL_PAD_KEY_ROW0 = 10, + MX6SLL_PAD_KEY_COL1 = 11, + MX6SLL_PAD_KEY_ROW1 = 12, + MX6SLL_PAD_KEY_COL2 = 13, + MX6SLL_PAD_KEY_ROW2 = 14, + MX6SLL_PAD_KEY_COL3 = 15, + MX6SLL_PAD_KEY_ROW3 = 16, + MX6SLL_PAD_KEY_COL4 = 17, + MX6SLL_PAD_KEY_ROW4 = 18, + MX6SLL_PAD_KEY_COL5 = 19, + MX6SLL_PAD_KEY_ROW5 = 20, + MX6SLL_PAD_KEY_COL6 = 21, + MX6SLL_PAD_KEY_ROW6 = 22, + MX6SLL_PAD_KEY_COL7 = 23, + MX6SLL_PAD_KEY_ROW7 = 24, + MX6SLL_PAD_EPDC_DATA00 = 25, + MX6SLL_PAD_EPDC_DATA01 = 26, + MX6SLL_PAD_EPDC_DATA02 = 27, + MX6SLL_PAD_EPDC_DATA03 = 28, + MX6SLL_PAD_EPDC_DATA04 = 29, + MX6SLL_PAD_EPDC_DATA05 = 30, + MX6SLL_PAD_EPDC_DATA06 = 31, + MX6SLL_PAD_EPDC_DATA07 = 32, + MX6SLL_PAD_EPDC_DATA08 = 33, + MX6SLL_PAD_EPDC_DATA09 = 34, + MX6SLL_PAD_EPDC_DATA10 = 35, + MX6SLL_PAD_EPDC_DATA11 = 36, + MX6SLL_PAD_EPDC_DATA12 = 37, + MX6SLL_PAD_EPDC_DATA13 = 38, + MX6SLL_PAD_EPDC_DATA14 = 39, + MX6SLL_PAD_EPDC_DATA15 = 40, + MX6SLL_PAD_EPDC_SDCLK = 41, + MX6SLL_PAD_EPDC_SDLE = 42, + MX6SLL_PAD_EPDC_SDOE = 43, + MX6SLL_PAD_EPDC_SDSHR = 44, + MX6SLL_PAD_EPDC_SDCE0 = 45, + MX6SLL_PAD_EPDC_SDCE1 = 46, + MX6SLL_PAD_EPDC_SDCE2 = 47, + MX6SLL_PAD_EPDC_SDCE3 = 48, + MX6SLL_PAD_EPDC_GDCLK = 49, + MX6SLL_PAD_EPDC_GDOE = 50, + MX6SLL_PAD_EPDC_GDRL = 51, + MX6SLL_PAD_EPDC_GDSP = 52, + MX6SLL_PAD_EPDC_VCOM0 = 53, + MX6SLL_PAD_EPDC_VCOM1 = 54, + MX6SLL_PAD_EPDC_BDR0 = 55, + MX6SLL_PAD_EPDC_BDR1 = 56, + MX6SLL_PAD_EPDC_PWR_CTRL0 = 57, + MX6SLL_PAD_EPDC_PWR_CTRL1 = 58, + MX6SLL_PAD_EPDC_PWR_CTRL2 = 59, + MX6SLL_PAD_EPDC_PWR_CTRL3 = 60, + MX6SLL_PAD_EPDC_PWR_COM = 61, + MX6SLL_PAD_EPDC_PWR_INT = 62, + MX6SLL_PAD_EPDC_PWR_STAT = 63, + MX6SLL_PAD_EPDC_PWR_WAKE = 64, + MX6SLL_PAD_LCD_CLK = 65, + MX6SLL_PAD_LCD_ENABLE = 66, + MX6SLL_PAD_LCD_HSYNC = 67, + MX6SLL_PAD_LCD_VSYNC = 68, + MX6SLL_PAD_LCD_RESET = 69, + MX6SLL_PAD_LCD_DATA00 = 70, + MX6SLL_PAD_LCD_DATA01 = 71, + MX6SLL_PAD_LCD_DATA02 = 72, + MX6SLL_PAD_LCD_DATA03 = 73, + MX6SLL_PAD_LCD_DATA04 = 74, + MX6SLL_PAD_LCD_DATA05 = 75, + MX6SLL_PAD_LCD_DATA06 = 76, + MX6SLL_PAD_LCD_DATA07 = 77, + MX6SLL_PAD_LCD_DATA08 = 78, + MX6SLL_PAD_LCD_DATA09 = 79, + MX6SLL_PAD_LCD_DATA10 = 80, + MX6SLL_PAD_LCD_DATA11 = 81, + MX6SLL_PAD_LCD_DATA12 = 82, + MX6SLL_PAD_LCD_DATA13 = 83, + MX6SLL_PAD_LCD_DATA14 = 84, + MX6SLL_PAD_LCD_DATA15 = 85, + MX6SLL_PAD_LCD_DATA16 = 86, + MX6SLL_PAD_LCD_DATA17 = 87, + MX6SLL_PAD_LCD_DATA18 = 88, + MX6SLL_PAD_LCD_DATA19 = 89, + MX6SLL_PAD_LCD_DATA20 = 90, + MX6SLL_PAD_LCD_DATA21 = 91, + MX6SLL_PAD_LCD_DATA22 = 92, + MX6SLL_PAD_LCD_DATA23 = 93, + MX6SLL_PAD_AUD_RXFS = 94, + MX6SLL_PAD_AUD_RXC = 95, + MX6SLL_PAD_AUD_RXD = 96, + MX6SLL_PAD_AUD_TXC = 97, + MX6SLL_PAD_AUD_TXFS = 98, + MX6SLL_PAD_AUD_TXD = 99, + MX6SLL_PAD_AUD_MCLK = 100, + MX6SLL_PAD_UART1_RXD = 101, + MX6SLL_PAD_UART1_TXD = 102, + MX6SLL_PAD_I2C1_SCL = 103, + MX6SLL_PAD_I2C1_SDA = 104, + MX6SLL_PAD_I2C2_SCL = 105, + MX6SLL_PAD_I2C2_SDA = 106, + MX6SLL_PAD_ECSPI1_SCLK = 107, + MX6SLL_PAD_ECSPI1_MOSI = 108, + MX6SLL_PAD_ECSPI1_MISO = 109, + MX6SLL_PAD_ECSPI1_SS0 = 110, + MX6SLL_PAD_ECSPI2_SCLK = 111, + MX6SLL_PAD_ECSPI2_MOSI = 112, + MX6SLL_PAD_ECSPI2_MISO = 113, + MX6SLL_PAD_ECSPI2_SS0 = 114, + MX6SLL_PAD_SD1_CLK = 115, + MX6SLL_PAD_SD1_CMD = 116, + MX6SLL_PAD_SD1_DATA0 = 117, + MX6SLL_PAD_SD1_DATA1 = 118, + MX6SLL_PAD_SD1_DATA2 = 119, + MX6SLL_PAD_SD1_DATA3 = 120, + MX6SLL_PAD_SD1_DATA4 = 121, + MX6SLL_PAD_SD1_DATA5 = 122, + MX6SLL_PAD_SD1_DATA6 = 123, + MX6SLL_PAD_SD1_DATA7 = 124, + MX6SLL_PAD_SD2_RESET = 125, + MX6SLL_PAD_SD2_CLK = 126, + MX6SLL_PAD_SD2_CMD = 127, + MX6SLL_PAD_SD2_DATA0 = 128, + MX6SLL_PAD_SD2_DATA1 = 129, + MX6SLL_PAD_SD2_DATA2 = 130, + MX6SLL_PAD_SD2_DATA3 = 131, + MX6SLL_PAD_SD2_DATA4 = 132, + MX6SLL_PAD_SD2_DATA5 = 133, + MX6SLL_PAD_SD2_DATA6 = 134, + MX6SLL_PAD_SD2_DATA7 = 135, + MX6SLL_PAD_SD3_CLK = 136, + MX6SLL_PAD_SD3_CMD = 137, + MX6SLL_PAD_SD3_DATA0 = 138, + MX6SLL_PAD_SD3_DATA1 = 139, + MX6SLL_PAD_SD3_DATA2 = 140, + MX6SLL_PAD_SD3_DATA3 = 141, + MX6SLL_PAD_GPIO4_IO20 = 142, + MX6SLL_PAD_GPIO4_IO21 = 143, + MX6SLL_PAD_GPIO4_IO19 = 144, + MX6SLL_PAD_GPIO4_IO25 = 145, + MX6SLL_PAD_GPIO4_IO18 = 146, + MX6SLL_PAD_GPIO4_IO24 = 147, + MX6SLL_PAD_GPIO4_IO23 = 148, + MX6SLL_PAD_GPIO4_IO17 = 149, + MX6SLL_PAD_GPIO4_IO22 = 150, + MX6SLL_PAD_GPIO4_IO16 = 151, + MX6SLL_PAD_GPIO4_IO26 = 152, +}; + +enum imx6sll_lpsr_pads { + MX6SLL_PAD_SNVS_TAMPER = 0, + MX6SLL_PAD_SNVS_PMIC_ON_REQ = 1, + MX6SLL_PAD_SNVS_PMIC_STBY_REQ = 2, + MX6SLL_PAD_SNVS_BOOT_MODE0 = 3, + MX6SLL_PAD_SNVS_BOOT_MODE1 = 4, +}; + +/* Pad names for the pinmux subsystem */ +static const struct pinctrl_pin_desc imx6sll_pinctrl_pads[] = { + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE0), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE1), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE2), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE3), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE4), + IMX_PINCTRL_PIN(MX6SLL_PAD_WDOG_B), + IMX_PINCTRL_PIN(MX6SLL_PAD_REF_CLK_24M), + IMX_PINCTRL_PIN(MX6SLL_PAD_REF_CLK_32K), + IMX_PINCTRL_PIN(MX6SLL_PAD_PWM1), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL0), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW0), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL1), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW1), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL2), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW2), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL3), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW3), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL4), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW4), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL5), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW5), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL6), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW6), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL7), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW7), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA00), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA01), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA02), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA03), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA04), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA05), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA06), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA07), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA08), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA09), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA10), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA11), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA12), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA13), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA14), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA15), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDLE), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDOE), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDSHR), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE2), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE3), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDOE), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDRL), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDSP), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_VCOM0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_VCOM1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_BDR0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_BDR1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL2), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL3), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_COM), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_INT), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_STAT), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_WAKE), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_ENABLE), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_HSYNC), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_VSYNC), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_RESET), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA00), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA01), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA02), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA03), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA04), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA05), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA06), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA07), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA08), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA09), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA10), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA11), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA12), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA13), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA14), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA15), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA16), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA17), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA18), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA19), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA20), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA21), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA22), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA23), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXFS), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXC), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXC), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXFS), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_MCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_UART1_RXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_UART1_TXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C1_SCL), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C1_SDA), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C2_SCL), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C2_SDA), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_SCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_MOSI), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_MISO), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_SS0), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_SCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_MOSI), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_MISO), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_SS0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_CMD), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA1), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA2), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA3), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA4), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA5), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA6), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA7), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_RESET), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_CMD), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA1), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA2), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA3), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA4), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA5), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA6), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA7), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_CMD), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA1), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA2), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA3), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO20), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO21), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO19), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO25), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO18), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO24), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO23), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO17), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO22), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO16), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO26), +}; + +static struct imx_pinctrl_soc_info imx6sll_pinctrl_info = { + .pins = imx6sll_pinctrl_pads, + .npins = ARRAY_SIZE(imx6sll_pinctrl_pads), + .gpr_compatible = "fsl,imx6sll-iomuxc-gpr", +}; + +static const struct of_device_id imx6sll_pinctrl_of_match[] = { + { .compatible = "fsl,imx6sll-iomuxc", .data = &imx6sll_pinctrl_info, }, + { /* sentinel */ } +}; + +static int imx6sll_pinctrl_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct imx_pinctrl_soc_info *pinctrl_info; + + match = of_match_device(imx6sll_pinctrl_of_match, &pdev->dev); + + if (!match) + return -ENODEV; + + pinctrl_info = (struct imx_pinctrl_soc_info *) match->data; + + return imx_pinctrl_probe(pdev, pinctrl_info); +} + +static struct platform_driver imx6sll_pinctrl_driver = { + .driver = { + .name = "imx6sll-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(imx6sll_pinctrl_of_match), + }, + .probe = imx6sll_pinctrl_probe, +}; + +static int __init imx6sll_pinctrl_init(void) +{ + return platform_driver_register(&imx6sll_pinctrl_driver); +} +arch_initcall(imx6sll_pinctrl_init); + +static void __exit imx6sll_pinctrl_exit(void) +{ + platform_driver_unregister(&imx6sll_pinctrl_driver); +} +module_exit(imx6sll_pinctrl_exit); -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 04/11] driver: pinctrl: imx: Add pinctrl driver support for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Add pinctrl driver support for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/Kconfig | 1 + drivers/pinctrl/freescale/Kconfig | 7 + drivers/pinctrl/freescale/Makefile | 1 + drivers/pinctrl/freescale/pinctrl-imx6sll.c | 385 ++++++++++++++++++++++++++++ 4 files changed, 394 insertions(+) create mode 100644 drivers/pinctrl/freescale/pinctrl-imx6sll.c diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 33bcfda..c907d9f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -514,6 +514,7 @@ config SOC_IMX6SL config SOC_IMX6SLL bool "i.MX6 SoloLiteLite support" + select PINCTRL_IMX6SLL select SOC_IMX6 help diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig index fc8cbf6..93ca39f 100644 --- a/drivers/pinctrl/freescale/Kconfig +++ b/drivers/pinctrl/freescale/Kconfig @@ -81,6 +81,13 @@ config PINCTRL_IMX6SL help Say Y here to enable the imx6sl pinctrl driver +config PINCTRL_IMX6SLL + bool "IMX6SL pinctrl driver" + depends on SOC_IMX6SLL + select PINCTRL_IMX + help + Say Y here to enable the imx6sl pinctrl driver + config PINCTRL_IMX6SX bool "IMX6SX pinctrl driver" depends on SOC_IMX6SX diff --git a/drivers/pinctrl/freescale/Makefile b/drivers/pinctrl/freescale/Makefile index d44c9e2..5f23765 100644 --- a/drivers/pinctrl/freescale/Makefile +++ b/drivers/pinctrl/freescale/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_PINCTRL_IMX53) += pinctrl-imx53.o obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6dl.o obj-$(CONFIG_PINCTRL_IMX6SL) += pinctrl-imx6sl.o +obj-$(CONFIG_PINCTRL_IMX6SLL) += pinctrl-imx6sll.o obj-$(CONFIG_PINCTRL_IMX6SX) += pinctrl-imx6sx.o obj-$(CONFIG_PINCTRL_IMX6UL) += pinctrl-imx6ul.o obj-$(CONFIG_PINCTRL_IMX7D) += pinctrl-imx7d.o diff --git a/drivers/pinctrl/freescale/pinctrl-imx6sll.c b/drivers/pinctrl/freescale/pinctrl-imx6sll.c new file mode 100644 index 0000000..2f4baff --- /dev/null +++ b/drivers/pinctrl/freescale/pinctrl-imx6sll.c @@ -0,0 +1,385 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Author: Bai Ping <ping.bai@nxp.com> + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-imx.h" + +enum imx6sll_pads { + MX6SLL_PAD_RESERVE0 = 0, + MX6SLL_PAD_RESERVE1 = 1, + MX6SLL_PAD_RESERVE2 = 2, + MX6SLL_PAD_RESERVE3 = 3, + MX6SLL_PAD_RESERVE4 = 4, + MX6SLL_PAD_WDOG_B = 5, + MX6SLL_PAD_REF_CLK_24M = 6, + MX6SLL_PAD_REF_CLK_32K = 7, + MX6SLL_PAD_PWM1 = 8, + MX6SLL_PAD_KEY_COL0 = 9, + MX6SLL_PAD_KEY_ROW0 = 10, + MX6SLL_PAD_KEY_COL1 = 11, + MX6SLL_PAD_KEY_ROW1 = 12, + MX6SLL_PAD_KEY_COL2 = 13, + MX6SLL_PAD_KEY_ROW2 = 14, + MX6SLL_PAD_KEY_COL3 = 15, + MX6SLL_PAD_KEY_ROW3 = 16, + MX6SLL_PAD_KEY_COL4 = 17, + MX6SLL_PAD_KEY_ROW4 = 18, + MX6SLL_PAD_KEY_COL5 = 19, + MX6SLL_PAD_KEY_ROW5 = 20, + MX6SLL_PAD_KEY_COL6 = 21, + MX6SLL_PAD_KEY_ROW6 = 22, + MX6SLL_PAD_KEY_COL7 = 23, + MX6SLL_PAD_KEY_ROW7 = 24, + MX6SLL_PAD_EPDC_DATA00 = 25, + MX6SLL_PAD_EPDC_DATA01 = 26, + MX6SLL_PAD_EPDC_DATA02 = 27, + MX6SLL_PAD_EPDC_DATA03 = 28, + MX6SLL_PAD_EPDC_DATA04 = 29, + MX6SLL_PAD_EPDC_DATA05 = 30, + MX6SLL_PAD_EPDC_DATA06 = 31, + MX6SLL_PAD_EPDC_DATA07 = 32, + MX6SLL_PAD_EPDC_DATA08 = 33, + MX6SLL_PAD_EPDC_DATA09 = 34, + MX6SLL_PAD_EPDC_DATA10 = 35, + MX6SLL_PAD_EPDC_DATA11 = 36, + MX6SLL_PAD_EPDC_DATA12 = 37, + MX6SLL_PAD_EPDC_DATA13 = 38, + MX6SLL_PAD_EPDC_DATA14 = 39, + MX6SLL_PAD_EPDC_DATA15 = 40, + MX6SLL_PAD_EPDC_SDCLK = 41, + MX6SLL_PAD_EPDC_SDLE = 42, + MX6SLL_PAD_EPDC_SDOE = 43, + MX6SLL_PAD_EPDC_SDSHR = 44, + MX6SLL_PAD_EPDC_SDCE0 = 45, + MX6SLL_PAD_EPDC_SDCE1 = 46, + MX6SLL_PAD_EPDC_SDCE2 = 47, + MX6SLL_PAD_EPDC_SDCE3 = 48, + MX6SLL_PAD_EPDC_GDCLK = 49, + MX6SLL_PAD_EPDC_GDOE = 50, + MX6SLL_PAD_EPDC_GDRL = 51, + MX6SLL_PAD_EPDC_GDSP = 52, + MX6SLL_PAD_EPDC_VCOM0 = 53, + MX6SLL_PAD_EPDC_VCOM1 = 54, + MX6SLL_PAD_EPDC_BDR0 = 55, + MX6SLL_PAD_EPDC_BDR1 = 56, + MX6SLL_PAD_EPDC_PWR_CTRL0 = 57, + MX6SLL_PAD_EPDC_PWR_CTRL1 = 58, + MX6SLL_PAD_EPDC_PWR_CTRL2 = 59, + MX6SLL_PAD_EPDC_PWR_CTRL3 = 60, + MX6SLL_PAD_EPDC_PWR_COM = 61, + MX6SLL_PAD_EPDC_PWR_INT = 62, + MX6SLL_PAD_EPDC_PWR_STAT = 63, + MX6SLL_PAD_EPDC_PWR_WAKE = 64, + MX6SLL_PAD_LCD_CLK = 65, + MX6SLL_PAD_LCD_ENABLE = 66, + MX6SLL_PAD_LCD_HSYNC = 67, + MX6SLL_PAD_LCD_VSYNC = 68, + MX6SLL_PAD_LCD_RESET = 69, + MX6SLL_PAD_LCD_DATA00 = 70, + MX6SLL_PAD_LCD_DATA01 = 71, + MX6SLL_PAD_LCD_DATA02 = 72, + MX6SLL_PAD_LCD_DATA03 = 73, + MX6SLL_PAD_LCD_DATA04 = 74, + MX6SLL_PAD_LCD_DATA05 = 75, + MX6SLL_PAD_LCD_DATA06 = 76, + MX6SLL_PAD_LCD_DATA07 = 77, + MX6SLL_PAD_LCD_DATA08 = 78, + MX6SLL_PAD_LCD_DATA09 = 79, + MX6SLL_PAD_LCD_DATA10 = 80, + MX6SLL_PAD_LCD_DATA11 = 81, + MX6SLL_PAD_LCD_DATA12 = 82, + MX6SLL_PAD_LCD_DATA13 = 83, + MX6SLL_PAD_LCD_DATA14 = 84, + MX6SLL_PAD_LCD_DATA15 = 85, + MX6SLL_PAD_LCD_DATA16 = 86, + MX6SLL_PAD_LCD_DATA17 = 87, + MX6SLL_PAD_LCD_DATA18 = 88, + MX6SLL_PAD_LCD_DATA19 = 89, + MX6SLL_PAD_LCD_DATA20 = 90, + MX6SLL_PAD_LCD_DATA21 = 91, + MX6SLL_PAD_LCD_DATA22 = 92, + MX6SLL_PAD_LCD_DATA23 = 93, + MX6SLL_PAD_AUD_RXFS = 94, + MX6SLL_PAD_AUD_RXC = 95, + MX6SLL_PAD_AUD_RXD = 96, + MX6SLL_PAD_AUD_TXC = 97, + MX6SLL_PAD_AUD_TXFS = 98, + MX6SLL_PAD_AUD_TXD = 99, + MX6SLL_PAD_AUD_MCLK = 100, + MX6SLL_PAD_UART1_RXD = 101, + MX6SLL_PAD_UART1_TXD = 102, + MX6SLL_PAD_I2C1_SCL = 103, + MX6SLL_PAD_I2C1_SDA = 104, + MX6SLL_PAD_I2C2_SCL = 105, + MX6SLL_PAD_I2C2_SDA = 106, + MX6SLL_PAD_ECSPI1_SCLK = 107, + MX6SLL_PAD_ECSPI1_MOSI = 108, + MX6SLL_PAD_ECSPI1_MISO = 109, + MX6SLL_PAD_ECSPI1_SS0 = 110, + MX6SLL_PAD_ECSPI2_SCLK = 111, + MX6SLL_PAD_ECSPI2_MOSI = 112, + MX6SLL_PAD_ECSPI2_MISO = 113, + MX6SLL_PAD_ECSPI2_SS0 = 114, + MX6SLL_PAD_SD1_CLK = 115, + MX6SLL_PAD_SD1_CMD = 116, + MX6SLL_PAD_SD1_DATA0 = 117, + MX6SLL_PAD_SD1_DATA1 = 118, + MX6SLL_PAD_SD1_DATA2 = 119, + MX6SLL_PAD_SD1_DATA3 = 120, + MX6SLL_PAD_SD1_DATA4 = 121, + MX6SLL_PAD_SD1_DATA5 = 122, + MX6SLL_PAD_SD1_DATA6 = 123, + MX6SLL_PAD_SD1_DATA7 = 124, + MX6SLL_PAD_SD2_RESET = 125, + MX6SLL_PAD_SD2_CLK = 126, + MX6SLL_PAD_SD2_CMD = 127, + MX6SLL_PAD_SD2_DATA0 = 128, + MX6SLL_PAD_SD2_DATA1 = 129, + MX6SLL_PAD_SD2_DATA2 = 130, + MX6SLL_PAD_SD2_DATA3 = 131, + MX6SLL_PAD_SD2_DATA4 = 132, + MX6SLL_PAD_SD2_DATA5 = 133, + MX6SLL_PAD_SD2_DATA6 = 134, + MX6SLL_PAD_SD2_DATA7 = 135, + MX6SLL_PAD_SD3_CLK = 136, + MX6SLL_PAD_SD3_CMD = 137, + MX6SLL_PAD_SD3_DATA0 = 138, + MX6SLL_PAD_SD3_DATA1 = 139, + MX6SLL_PAD_SD3_DATA2 = 140, + MX6SLL_PAD_SD3_DATA3 = 141, + MX6SLL_PAD_GPIO4_IO20 = 142, + MX6SLL_PAD_GPIO4_IO21 = 143, + MX6SLL_PAD_GPIO4_IO19 = 144, + MX6SLL_PAD_GPIO4_IO25 = 145, + MX6SLL_PAD_GPIO4_IO18 = 146, + MX6SLL_PAD_GPIO4_IO24 = 147, + MX6SLL_PAD_GPIO4_IO23 = 148, + MX6SLL_PAD_GPIO4_IO17 = 149, + MX6SLL_PAD_GPIO4_IO22 = 150, + MX6SLL_PAD_GPIO4_IO16 = 151, + MX6SLL_PAD_GPIO4_IO26 = 152, +}; + +enum imx6sll_lpsr_pads { + MX6SLL_PAD_SNVS_TAMPER = 0, + MX6SLL_PAD_SNVS_PMIC_ON_REQ = 1, + MX6SLL_PAD_SNVS_PMIC_STBY_REQ = 2, + MX6SLL_PAD_SNVS_BOOT_MODE0 = 3, + MX6SLL_PAD_SNVS_BOOT_MODE1 = 4, +}; + +/* Pad names for the pinmux subsystem */ +static const struct pinctrl_pin_desc imx6sll_pinctrl_pads[] = { + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE0), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE1), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE2), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE3), + IMX_PINCTRL_PIN(MX6SLL_PAD_RESERVE4), + IMX_PINCTRL_PIN(MX6SLL_PAD_WDOG_B), + IMX_PINCTRL_PIN(MX6SLL_PAD_REF_CLK_24M), + IMX_PINCTRL_PIN(MX6SLL_PAD_REF_CLK_32K), + IMX_PINCTRL_PIN(MX6SLL_PAD_PWM1), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL0), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW0), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL1), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW1), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL2), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW2), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL3), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW3), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL4), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW4), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL5), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW5), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL6), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW6), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_COL7), + IMX_PINCTRL_PIN(MX6SLL_PAD_KEY_ROW7), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA00), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA01), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA02), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA03), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA04), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA05), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA06), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA07), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA08), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA09), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA10), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA11), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA12), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA13), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA14), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_DATA15), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDLE), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDOE), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDSHR), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE2), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_SDCE3), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDOE), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDRL), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_GDSP), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_VCOM0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_VCOM1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_BDR0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_BDR1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL0), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL1), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL2), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_CTRL3), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_COM), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_INT), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_STAT), + IMX_PINCTRL_PIN(MX6SLL_PAD_EPDC_PWR_WAKE), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_ENABLE), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_HSYNC), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_VSYNC), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_RESET), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA00), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA01), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA02), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA03), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA04), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA05), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA06), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA07), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA08), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA09), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA10), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA11), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA12), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA13), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA14), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA15), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA16), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA17), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA18), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA19), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA20), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA21), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA22), + IMX_PINCTRL_PIN(MX6SLL_PAD_LCD_DATA23), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXFS), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXC), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_RXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXC), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXFS), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_TXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_AUD_MCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_UART1_RXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_UART1_TXD), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C1_SCL), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C1_SDA), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C2_SCL), + IMX_PINCTRL_PIN(MX6SLL_PAD_I2C2_SDA), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_SCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_MOSI), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_MISO), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI1_SS0), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_SCLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_MOSI), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_MISO), + IMX_PINCTRL_PIN(MX6SLL_PAD_ECSPI2_SS0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_CMD), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA1), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA2), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA3), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA4), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA5), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA6), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD1_DATA7), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_RESET), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_CMD), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA1), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA2), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA3), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA4), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA5), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA6), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD2_DATA7), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_CLK), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_CMD), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA0), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA1), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA2), + IMX_PINCTRL_PIN(MX6SLL_PAD_SD3_DATA3), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO20), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO21), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO19), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO25), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO18), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO24), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO23), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO17), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO22), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO16), + IMX_PINCTRL_PIN(MX6SLL_PAD_GPIO4_IO26), +}; + +static struct imx_pinctrl_soc_info imx6sll_pinctrl_info = { + .pins = imx6sll_pinctrl_pads, + .npins = ARRAY_SIZE(imx6sll_pinctrl_pads), + .gpr_compatible = "fsl,imx6sll-iomuxc-gpr", +}; + +static const struct of_device_id imx6sll_pinctrl_of_match[] = { + { .compatible = "fsl,imx6sll-iomuxc", .data = &imx6sll_pinctrl_info, }, + { /* sentinel */ } +}; + +static int imx6sll_pinctrl_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct imx_pinctrl_soc_info *pinctrl_info; + + match = of_match_device(imx6sll_pinctrl_of_match, &pdev->dev); + + if (!match) + return -ENODEV; + + pinctrl_info = (struct imx_pinctrl_soc_info *) match->data; + + return imx_pinctrl_probe(pdev, pinctrl_info); +} + +static struct platform_driver imx6sll_pinctrl_driver = { + .driver = { + .name = "imx6sll-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(imx6sll_pinctrl_of_match), + }, + .probe = imx6sll_pinctrl_probe, +}; + +static int __init imx6sll_pinctrl_init(void) +{ + return platform_driver_register(&imx6sll_pinctrl_driver); +} +arch_initcall(imx6sll_pinctrl_init); + +static void __exit imx6sll_pinctrl_exit(void) +{ + platform_driver_unregister(&imx6sll_pinctrl_driver); +} +module_exit(imx6sll_pinctrl_exit); -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
[parent not found: <1480660774-25055-1-git-send-email-ping.bai-3arQi8VN3Tc@public.gmane.org>]
* [PATCH 05/11] ARM: dts: imx: Add basic dtsi for imx6sll 2016-12-02 6:39 ` Bai Ping @ 2016-12-02 6:39 ` Bai Ping -1 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, mturquette-rdvid1DuHRBWk0Htik3J/w, sboyd-sgV2jX0FEOL9JmXXK+q4OQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, linus.walleij-QSEj5FYQhm4dnm+yROfE0A Cc: kernel-bIcnvbaLZ9MEGnE8C9+IrQ, fabio.estevam-3arQi8VN3Tc, daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A, tglx-hfZtesqFncYOwBW4kG4KsQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, linux-clk-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-gpio-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, ping.bai-3arQi8VN3Tc Add basic dtsi and pinfunc header file for imx6sll Signed-off-by: Bai Ping <ping.bai-3arQi8VN3Tc@public.gmane.org> --- arch/arm/boot/dts/imx6sll-pinfunc.h | 882 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6sll.dtsi | 854 ++++++++++++++++++++++++++++++++++ 2 files changed, 1736 insertions(+) create mode 100644 arch/arm/boot/dts/imx6sll-pinfunc.h create mode 100644 arch/arm/boot/dts/imx6sll.dtsi diff --git a/arch/arm/boot/dts/imx6sll-pinfunc.h b/arch/arm/boot/dts/imx6sll-pinfunc.h new file mode 100644 index 0000000..5a3700b --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-pinfunc.h @@ -0,0 +1,882 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6SLL_PINFUNC_H +#define __DTS_IMX6SLL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6SLL_PAD_WDOG_B__WDOG1_B 0x0014 0x02DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x0014 0x02DC 0x0000 0x1 0x0 +#define MX6SLL_PAD_WDOG_B__UART5_RI_B 0x0014 0x02DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_WDOG_B__GPIO3_IO18 0x0014 0x02DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x0018 0x02E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x0018 0x02E0 0x068C 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT 0x0018 0x02E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID 0x0018 0x02E0 0x0560 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x0018 0x02E0 0x05AC 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21 0x0018 0x02E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__SD3_WP 0x0018 0x02E0 0x0794 0x6 0x0 +#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x001C 0x02E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x001C 0x02E4 0x0690 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT 0x001C 0x02E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID 0x001C 0x02E4 0x055C 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL 0x001C 0x02E4 0x0000 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x001C 0x02E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B 0x001C 0x02E4 0x0780 0x6 0x0 +#define MX6SLL_PAD_PWM1__PWM1_OUT 0x0020 0x02E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_PWM1__CCM_CLKO 0x0020 0x02E8 0x0000 0x1 0x0 +#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT 0x0020 0x02E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_PWM1__CSI_MCLK 0x0020 0x02E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_PWM1__GPIO3_IO23 0x0020 0x02E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_PWM1__EPIT1_OUT 0x0020 0x02E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL0__KEY_COL0 0x0024 0x02EC 0x06A0 0x0 0x0 +#define MX6SLL_PAD_KEY_COL0__I2C2_SCL 0x0024 0x02EC 0x0684 0x1 0x0 +#define MX6SLL_PAD_KEY_COL0__LCD_DATA00 0x0024 0x02EC 0x06D8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL0__SD1_CD_B 0x0024 0x02EC 0x0770 0x4 0x1 +#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24 0x0024 0x02EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0 0x0028 0x02F0 0x06C0 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA 0x0028 0x02F0 0x0688 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01 0x0028 0x02F0 0x06DC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW0__SD1_WP 0x0028 0x02F0 0x0774 0x4 0x1 +#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25 0x0028 0x02F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL1__KEY_COL1 0x002C 0x02F4 0x06A4 0x0 0x0 +#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI 0x002C 0x02F4 0x0658 0x1 0x1 +#define MX6SLL_PAD_KEY_COL1__LCD_DATA02 0x002C 0x02F4 0x06E0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL1__SD3_DATA4 0x002C 0x02F4 0x0784 0x4 0x0 +#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26 0x002C 0x02F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1 0x0030 0x02F8 0x06C4 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO 0x0030 0x02F8 0x0654 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03 0x0030 0x02F8 0x06E4 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD 0x0030 0x02F8 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5 0x0030 0x02F8 0x0788 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x0030 0x02F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL2__KEY_COL2 0x0034 0x02FC 0x06A8 0x0 0x0 +#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0 0x0034 0x02FC 0x065C 0x1 0x1 +#define MX6SLL_PAD_KEY_COL2__LCD_DATA04 0x0034 0x02FC 0x06E8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL2__CSI_DATA12 0x0034 0x02FC 0x05B8 0x3 0x1 +#define MX6SLL_PAD_KEY_COL2__SD3_DATA6 0x0034 0x02FC 0x078C 0x4 0x0 +#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x0034 0x02FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2 0x0038 0x0300 0x06C8 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK 0x0038 0x0300 0x0650 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05 0x0038 0x0300 0x06EC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13 0x0038 0x0300 0x05BC 0x3 0x1 +#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7 0x0038 0x0300 0x0790 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29 0x0038 0x0300 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__KEY_COL3 0x003C 0x0304 0x06AC 0x0 0x0 +#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS 0x003C 0x0304 0x05A0 0x1 0x1 +#define MX6SLL_PAD_KEY_COL3__LCD_DATA06 0x003C 0x0304 0x06F0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL3__CSI_DATA14 0x003C 0x0304 0x05C0 0x3 0x1 +#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x003C 0x0304 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__SD1_RESET 0x003C 0x0304 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3 0x0040 0x0308 0x06CC 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC 0x0040 0x0308 0x059C 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07 0x0040 0x0308 0x06F4 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15 0x0040 0x0308 0x05C4 0x3 0x2 +#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31 0x0040 0x0308 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT 0x0040 0x0308 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL4__KEY_COL4 0x0044 0x030C 0x06B0 0x0 0x1 +#define MX6SLL_PAD_KEY_COL4__AUD6_RXD 0x0044 0x030C 0x0594 0x1 0x1 +#define MX6SLL_PAD_KEY_COL4__LCD_DATA08 0x0044 0x030C 0x06F8 0x2 0x1 +#define MX6SLL_PAD_KEY_COL4__CSI_DATA16 0x0044 0x030C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x0044 0x030C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR 0x0044 0x030C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4 0x0048 0x0310 0x06D0 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC 0x0048 0x0310 0x05A4 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09 0x0048 0x0310 0x06FC 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17 0x0048 0x0310 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01 0x0048 0x0310 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC 0x0048 0x0310 0x076C 0x6 0x2 +#define MX6SLL_PAD_KEY_COL5__KEY_COL5 0x004C 0x0314 0x0694 0x0 0x1 +#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS 0x004C 0x0314 0x05A8 0x1 0x1 +#define MX6SLL_PAD_KEY_COL5__LCD_DATA10 0x004C 0x0314 0x0700 0x2 0x0 +#define MX6SLL_PAD_KEY_COL5__CSI_DATA18 0x004C 0x0314 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x004C 0x0314 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR 0x004C 0x0314 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5 0x0050 0x0318 0x06B4 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD 0x0050 0x0318 0x0598 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11 0x0050 0x0318 0x0704 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19 0x0050 0x0318 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x0050 0x0318 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC 0x0050 0x0318 0x0768 0x6 0x3 +#define MX6SLL_PAD_KEY_COL6__KEY_COL6 0x0054 0x031C 0x0698 0x0 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x0054 0x031C 0x075C 0x1 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX 0x0054 0x031C 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL6__LCD_DATA12 0x0054 0x031C 0x0708 0x2 0x1 +#define MX6SLL_PAD_KEY_COL6__CSI_DATA20 0x0054 0x031C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x0054 0x031C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL6__SD3_RESET 0x0054 0x031C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6 0x0058 0x0320 0x06B8 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x0058 0x0320 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX 0x0058 0x0320 0x075C 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13 0x0058 0x0320 0x070C 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21 0x0058 0x0320 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x0058 0x0320 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT 0x0058 0x0320 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL7__KEY_COL7 0x005C 0x0324 0x069C 0x0 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS 0x005C 0x0324 0x0758 0x1 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS 0x005C 0x0324 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL7__LCD_DATA14 0x005C 0x0324 0x0710 0x2 0x1 +#define MX6SLL_PAD_KEY_COL7__CSI_DATA22 0x005C 0x0324 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06 0x005C 0x0324 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL7__SD1_WP 0x005C 0x0324 0x0774 0x6 0x3 +#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7 0x0060 0x0328 0x06BC 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS 0x0060 0x0328 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS 0x0060 0x0328 0x0758 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15 0x0060 0x0328 0x0714 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23 0x0060 0x0328 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x0060 0x0328 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B 0x0060 0x0328 0x0770 0x6 0x3 +#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x0064 0x032C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI 0x0064 0x032C 0x0658 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24 0x0064 0x032C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00 0x0064 0x032C 0x05C8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07 0x0064 0x032C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x0068 0x0330 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO 0x0068 0x0330 0x0654 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25 0x0068 0x0330 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01 0x0068 0x0330 0x05CC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08 0x0068 0x0330 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x006C 0x0334 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0 0x006C 0x0334 0x065C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26 0x006C 0x0334 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x006C 0x0334 0x05D0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09 0x006C 0x0334 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x0070 0x0338 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK 0x0070 0x0338 0x0650 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27 0x0070 0x0338 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x0070 0x0338 0x05D4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10 0x0070 0x0338 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x0074 0x033C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1 0x0074 0x033C 0x0660 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28 0x0074 0x033C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x0074 0x033C 0x05D8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11 0x0074 0x033C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x0078 0x0340 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2 0x0078 0x0340 0x0664 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29 0x0078 0x0340 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x0078 0x0340 0x05DC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12 0x0078 0x0340 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x007C 0x0344 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3 0x007C 0x0344 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30 0x007C 0x0344 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x007C 0x0344 0x05E0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13 0x007C 0x0344 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x0080 0x0348 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY 0x0080 0x0348 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31 0x0080 0x0348 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x0080 0x0348 0x05E4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14 0x0080 0x0348 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x0084 0x034C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI 0x0084 0x034C 0x063C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0 0x0084 0x034C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15 0x0084 0x034C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x0088 0x0350 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO 0x0088 0x0350 0x0638 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1 0x0088 0x0350 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16 0x0088 0x0350 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x008C 0x0354 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0 0x008C 0x0354 0x0648 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2 0x008C 0x0354 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17 0x008C 0x0354 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x0090 0x0358 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK 0x0090 0x0358 0x0630 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3 0x0090 0x0358 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18 0x0090 0x0358 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x0094 0x035C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX 0x0094 0x035C 0x074C 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX 0x0094 0x035C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM 0x0094 0x035C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19 0x0094 0x035C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1 0x0094 0x035C 0x064C 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x0098 0x0360 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX 0x0098 0x0360 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX 0x0098 0x0360 0x074C 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ 0x0098 0x0360 0x0668 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20 0x0098 0x0360 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2 0x0098 0x0360 0x0640 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x009C 0x0364 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS 0x009C 0x0364 0x0748 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS 0x009C 0x0364 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT 0x009C 0x0364 0x066C 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21 0x009C 0x0364 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3 0x009C 0x0364 0x0644 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x00A0 0x0368 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS 0x00A0 0x0368 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS 0x00A0 0x0368 0x0748 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE 0x00A0 0x0368 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22 0x00A0 0x0368 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY 0x00A0 0x0368 0x0634 0x6 0x1 +#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x00A4 0x036C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI 0x00A4 0x036C 0x0624 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL 0x00A4 0x036C 0x0684 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x00A4 0x036C 0x05E8 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23 0x00A4 0x036C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x00A8 0x0370 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO 0x00A8 0x0370 0x0620 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA 0x00A8 0x0370 0x0688 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x00A8 0x0370 0x05EC 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24 0x00A8 0x0370 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x00AC 0x0374 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0 0x00AC 0x0374 0x0628 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10 0x00AC 0x0374 0x05B0 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x00AC 0x0374 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x00B0 0x0378 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK 0x00B0 0x0378 0x061C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4 0x00B0 0x0378 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11 0x00B0 0x0378 0x05B4 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x00B0 0x0378 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x00B4 0x037C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1 0x00B4 0x037C 0x062C 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT 0x00B4 0x037C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27 0x00B4 0x037C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x00B8 0x0380 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B 0x00B8 0x0380 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT 0x00B8 0x0380 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28 0x00B8 0x0380 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x00BC 0x0384 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL 0x00BC 0x0384 0x068C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT 0x00BC 0x0384 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29 0x00BC 0x0384 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3 0x00C0 0x0388 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA 0x00C0 0x0388 0x0690 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT 0x00C0 0x0388 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30 0x00C0 0x0388 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x00C4 0x038C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2 0x00C4 0x038C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x00C4 0x038C 0x05F4 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31 0x00C4 0x038C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET 0x00C4 0x038C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x00C8 0x0390 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3 0x00C8 0x0390 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x00C8 0x0390 0x05F0 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00 0x00C8 0x0390 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT 0x00C8 0x0390 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x00CC 0x0394 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY 0x00CC 0x0394 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x00CC 0x0394 0x0000 0x3 0x0 +#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01 0x00CC 0x0394 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDRL__SD2_WP 0x00CC 0x0394 0x077C 0x6 0x2 +#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x00D0 0x0398 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT 0x00D0 0x0398 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x00D0 0x0398 0x05F8 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02 0x00D0 0x0398 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B 0x00D0 0x0398 0x0778 0x6 0x2 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0 0x00D4 0x039C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS 0x00D4 0x039C 0x0588 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX 0x00D4 0x039C 0x0754 0x2 0x4 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX 0x00D4 0x039C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x00D4 0x039C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5 0x00D4 0x039C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1 0x00D8 0x03A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD 0x00D8 0x03A0 0x057C 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX 0x00D8 0x03A0 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX 0x00D8 0x03A0 0x0754 0x2 0x5 +#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x00D8 0x03A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6 0x00D8 0x03A0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0 0x00DC 0x03A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS 0x00DC 0x03A4 0x0750 0x2 0x2 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS 0x00DC 0x03A4 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05 0x00DC 0x03A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7 0x00DC 0x03A4 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1 0x00E0 0x03A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS 0x00E0 0x03A8 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS 0x00E0 0x03A8 0x0750 0x2 0x3 +#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06 0x00E0 0x03A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8 0x00E0 0x03A8 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0 0x00E4 0x03AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC 0x00E4 0x03AC 0x0584 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16 0x00E4 0x03AC 0x0718 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x00E4 0x03AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1 0x00E8 0x03B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS 0x00E8 0x03B0 0x0590 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17 0x00E8 0x03B0 0x071C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x00E8 0x03B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2 0x00EC 0x03B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD 0x00EC 0x03B4 0x0580 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18 0x00EC 0x03B4 0x0720 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09 0x00EC 0x03B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3 0x00F0 0x03B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC 0x00F0 0x03B8 0x058C 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19 0x00F0 0x03B8 0x0724 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x00F0 0x03B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM 0x00F4 0x03BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20 0x00F4 0x03BC 0x0728 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x00F4 0x03BC 0x055C 0x4 0x4 +#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11 0x00F4 0x03BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET 0x00F4 0x03BC 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ 0x00F8 0x03C0 0x0668 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21 0x00F8 0x03C0 0x072C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID 0x00F8 0x03C0 0x0560 0x4 0x3 +#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x00F8 0x03C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT 0x00F8 0x03C0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT 0x00FC 0x03C4 0x066C 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22 0x00FC 0x03C4 0x0730 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI 0x00FC 0x03C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x00FC 0x03C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP 0x00FC 0x03C4 0x0794 0x6 0x2 +#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE 0x0100 0x03C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23 0x0100 0x03C8 0x0734 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO 0x0100 0x03C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x0100 0x03C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B 0x0100 0x03C8 0x0780 0x6 0x2 +#define MX6SLL_PAD_LCD_CLK__LCD_CLK 0x0104 0x03CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN 0x0104 0x03CC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_CLK__PWM4_OUT 0x0104 0x03CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x0104 0x03CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x0108 0x03D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E 0x0108 0x03D0 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x0108 0x03D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x010C 0x03D4 0x06D4 0x0 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_CS 0x010C 0x03D4 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX 0x010C 0x03D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX 0x010C 0x03D4 0x074C 0x4 0x1 +#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x010C 0x03D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK 0x010C 0x03D4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x0110 0x03D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_RS 0x0110 0x03D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS 0x0110 0x03D8 0x0748 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS 0x0110 0x03D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x0110 0x03D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL 0x0110 0x03D8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_RESET 0x0114 0x03DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_BUSY 0x0114 0x03DC 0x06D4 0x2 0x1 +#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS 0x0114 0x03DC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS 0x0114 0x03DC 0x0748 0x4 0x1 +#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x0114 0x03DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY 0x0114 0x03DC 0x05AC 0x6 0x2 +#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x0118 0x03E0 0x06D8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI 0x0118 0x03E0 0x0608 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID 0x0118 0x03E0 0x0560 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03E0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B 0x0118 0x03E0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20 0x0118 0x03E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00 0x0118 0x03E0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00 0x0118 0x03E0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x011C 0x03E4 0x06DC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO 0x011C 0x03E4 0x0604 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID 0x011C 0x03E4 0x055C 0x2 0x3 +#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT 0x011C 0x03E4 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS 0x011C 0x03E4 0x0570 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x011C 0x03E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01 0x011C 0x03E4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01 0x011C 0x03E4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x0120 0x03E8 0x06E0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0 0x0120 0x03E8 0x0614 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT 0x0120 0x03E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03E8 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC 0x0120 0x03E8 0x056C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22 0x0120 0x03E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02 0x0120 0x03E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02 0x0120 0x03E8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x0124 0x03EC 0x06E4 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK 0x0124 0x03EC 0x05FC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B 0x0124 0x03EC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03EC 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD 0x0124 0x03EC 0x0564 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23 0x0124 0x03EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03 0x0124 0x03EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03 0x0124 0x03EC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x0128 0x03F0 0x06E8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1 0x0128 0x03F0 0x060C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC 0x0128 0x03F0 0x05F8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB 0x0128 0x03F0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC 0x0128 0x03F0 0x0574 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x0128 0x03F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04 0x0128 0x03F0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04 0x0128 0x03F0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x012C 0x03F4 0x06EC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2 0x012C 0x03F4 0x0610 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC 0x012C 0x03F4 0x05F0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS 0x012C 0x03F4 0x0578 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x012C 0x03F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05 0x012C 0x03F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05 0x012C 0x03F4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x0130 0x03F8 0x06F0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3 0x0130 0x03F8 0x0618 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK 0x0130 0x03F8 0x05F4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD 0x0130 0x03F8 0x0568 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x0130 0x03F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06 0x0130 0x03F8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06 0x0130 0x03F8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x0134 0x03FC 0x06F4 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY 0x0134 0x03FC 0x0600 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK 0x0134 0x03FC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT 0x0134 0x03FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x0134 0x03FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07 0x0134 0x03FC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07 0x0134 0x03FC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x0138 0x0400 0x06F8 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA08__KEY_COL0 0x0138 0x0400 0x06A0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09 0x0138 0x0400 0x05EC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK 0x0138 0x0400 0x061C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x0138 0x0400 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08 0x0138 0x0400 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08 0x0138 0x0400 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x013C 0x0404 0x06FC 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0 0x013C 0x0404 0x06C0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08 0x013C 0x0404 0x05E8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI 0x013C 0x0404 0x0624 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x013C 0x0404 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09 0x013C 0x0404 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09 0x013C 0x0404 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x0140 0x0408 0x0700 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA10__KEY_COL1 0x0140 0x0408 0x06A4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07 0x0140 0x0408 0x05E4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO 0x0140 0x0408 0x0620 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x0140 0x0408 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10 0x0140 0x0408 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10 0x0140 0x0408 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x0144 0x040C 0x0704 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1 0x0144 0x040C 0x06C4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06 0x0144 0x040C 0x05E0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1 0x0144 0x040C 0x062C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x0144 0x040C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11 0x0144 0x040C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11 0x0144 0x040C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x0148 0x0410 0x0708 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA12__KEY_COL2 0x0148 0x0410 0x06A8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05 0x0148 0x0410 0x05DC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS 0x0148 0x0410 0x0760 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS 0x0148 0x0410 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x0148 0x0410 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12 0x0148 0x0410 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12 0x0148 0x0410 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x014C 0x0414 0x070C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2 0x014C 0x0414 0x06C8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04 0x014C 0x0414 0x05D8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS 0x014C 0x0414 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS 0x014C 0x0414 0x0760 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x014C 0x0414 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13 0x014C 0x0414 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13 0x014C 0x0414 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x0150 0x0418 0x0710 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA14__KEY_COL3 0x0150 0x0418 0x06AC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03 0x0150 0x0418 0x05D4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX 0x0150 0x0418 0x0764 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX 0x0150 0x0418 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x0150 0x0418 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14 0x0150 0x0418 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14 0x0150 0x0418 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x0154 0x041C 0x0714 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3 0x0154 0x041C 0x06CC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02 0x0154 0x041C 0x05D0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX 0x0154 0x041C 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX 0x0154 0x041C 0x0764 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x0154 0x041C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15 0x0154 0x041C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15 0x0154 0x041C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x0158 0x0420 0x0718 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA16__KEY_COL4 0x0158 0x0420 0x06B0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x0420 0x05CC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL 0x0158 0x0420 0x0684 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x0158 0x0420 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24 0x0158 0x0420 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x015C 0x0424 0x071C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4 0x015C 0x0424 0x06D0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00 0x015C 0x0424 0x05C8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA 0x015C 0x0424 0x0688 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x015C 0x0424 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25 0x015C 0x0424 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x0160 0x0428 0x0720 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA18__KEY_COL5 0x0160 0x0428 0x0694 0x1 0x2 +#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15 0x0160 0x0428 0x05C4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1 0x0160 0x0428 0x0670 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x0160 0x0428 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26 0x0160 0x0428 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x0164 0x042C 0x0724 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5 0x0164 0x042C 0x06B4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14 0x0164 0x042C 0x05C0 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2 0x0164 0x042C 0x0674 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x0164 0x042C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27 0x0164 0x042C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x0168 0x0430 0x0728 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA20__KEY_COL6 0x0168 0x0430 0x0698 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13 0x0168 0x0430 0x05BC 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1 0x0168 0x0430 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x0168 0x0430 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28 0x0168 0x0430 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x016C 0x0434 0x072C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6 0x016C 0x0434 0x06B8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12 0x016C 0x0434 0x05B8 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2 0x016C 0x0434 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x016C 0x0434 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29 0x016C 0x0434 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x0170 0x0438 0x0730 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA22__KEY_COL7 0x0170 0x0438 0x069C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11 0x0170 0x0438 0x05B4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3 0x0170 0x0438 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x0170 0x0438 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30 0x0170 0x0438 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x0174 0x043C 0x0734 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7 0x0174 0x043C 0x06BC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10 0x0174 0x043C 0x05B0 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN 0x0174 0x043C 0x0678 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x0174 0x043C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31 0x0174 0x043C 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS 0x0178 0x0440 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL 0x0178 0x0440 0x067C 0x1 0x1 +#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX 0x0178 0x0440 0x0754 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX 0x0178 0x0440 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x0178 0x0440 0x068C 0x4 0x1 +#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00 0x0178 0x0440 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0 0x0178 0x0440 0x0648 0x6 0x0 +#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND 0x0178 0x0440 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXC__AUD3_RXC 0x017C 0x0444 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXC__I2C1_SDA 0x017C 0x0444 0x0680 0x1 0x1 +#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX 0x017C 0x0444 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX 0x017C 0x0444 0x0754 0x2 0x1 +#define MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x017C 0x0444 0x0690 0x4 0x1 +#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01 0x017C 0x0444 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1 0x017C 0x0444 0x064C 0x6 0x0 +#define MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x0180 0x0448 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI 0x0180 0x0448 0x063C 0x1 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX 0x0180 0x0448 0x075C 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX 0x0180 0x0448 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__SD1_LCTL 0x0180 0x0448 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02 0x0180 0x0448 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x0184 0x044C 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO 0x0184 0x044C 0x0638 0x1 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX 0x0184 0x044C 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX 0x0184 0x044C 0x075C 0x2 0x1 +#define MX6SLL_PAD_AUD_TXC__SD2_LCTL 0x0184 0x044C 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03 0x0184 0x044C 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x0188 0x0450 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT 0x0188 0x0450 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS 0x0188 0x0450 0x0758 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS 0x0188 0x0450 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL 0x0188 0x0450 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04 0x0188 0x0450 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x018C 0x0454 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK 0x018C 0x0454 0x0630 0x1 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS 0x018C 0x0454 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS 0x018C 0x0454 0x0758 0x2 0x1 +#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05 0x018C 0x0454 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x0190 0x0458 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT 0x0190 0x0458 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY 0x0190 0x0458 0x0634 0x2 0x0 +#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x0190 0x0458 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06 0x0190 0x0458 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x0190 0x0458 0x073C 0x6 0x1 +#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x0194 0x045C 0x0744 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX 0x0194 0x045C 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__PWM1_OUT 0x0194 0x045C 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX 0x0194 0x045C 0x075C 0x2 0x4 +#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX 0x0194 0x045C 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX 0x0194 0x045C 0x0764 0x4 0x6 +#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX 0x0194 0x045C 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16 0x0194 0x045C 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x0198 0x0460 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX 0x0198 0x0460 0x0744 0x0 0x1 +#define MX6SLL_PAD_UART1_TXD__PWM2_OUT 0x0198 0x0460 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX 0x0198 0x0460 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX 0x0198 0x0460 0x075C 0x2 0x5 +#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX 0x0198 0x0460 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX 0x0198 0x0460 0x0764 0x4 0x7 +#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17 0x0198 0x0460 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B 0x0198 0x0460 0x0000 0x7 0x0 +#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x019C 0x0464 0x067C 0x0 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS 0x019C 0x0464 0x0740 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS 0x019C 0x0464 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2 0x019C 0x0464 0x0640 0x2 0x0 +#define MX6SLL_PAD_I2C1_SCL__SD3_RESET 0x019C 0x0464 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12 0x019C 0x0464 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1 0x019C 0x0464 0x060C 0x6 0x0 +#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x01A0 0x0468 0x0680 0x0 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS 0x01A0 0x0468 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS 0x01A0 0x0468 0x0740 0x1 0x1 +#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3 0x01A0 0x0468 0x0644 0x2 0x0 +#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT 0x01A0 0x0468 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13 0x01A0 0x0468 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2 0x01A0 0x0468 0x0610 0x6 0x0 +#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x01A4 0x046C 0x0684 0x0 0x3 +#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS 0x01A4 0x046C 0x0570 0x1 0x2 +#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN 0x01A4 0x046C 0x0738 0x2 0x2 +#define MX6SLL_PAD_I2C2_SCL__SD3_WP 0x01A4 0x046C 0x0794 0x4 0x3 +#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14 0x01A4 0x046C 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY 0x01A4 0x046C 0x0600 0x6 0x1 +#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x01A8 0x0470 0x0688 0x0 0x3 +#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC 0x01A8 0x0470 0x056C 0x1 0x2 +#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT 0x01A8 0x0470 0x0000 0x2 0x0 +#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B 0x01A8 0x0470 0x0780 0x4 0x3 +#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15 0x01A8 0x0470 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x01AC 0x0474 0x05FC 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD 0x01AC 0x0474 0x0568 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x01AC 0x0474 0x0764 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x01AC 0x0474 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0 0x01AC 0x0474 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET 0x01AC 0x0474 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x01AC 0x0474 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x01AC 0x0474 0x0768 0x6 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x01B0 0x0478 0x0608 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC 0x01B0 0x0478 0x0574 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x01B0 0x0478 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x01B0 0x0478 0x0764 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1 0x01B0 0x0478 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT 0x01B0 0x0478 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09 0x01B0 0x0478 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x01B4 0x047C 0x0604 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS 0x01B4 0x047C 0x0578 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x01B4 0x047C 0x0760 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x01B4 0x047C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0 0x01B4 0x047C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP 0x01B4 0x047C 0x077C 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10 0x01B4 0x047C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0 0x01B8 0x0480 0x0614 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD 0x01B8 0x0480 0x0564 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x01B8 0x0480 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x01B8 0x0480 0x0760 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1 0x01B8 0x0480 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B 0x01B8 0x0480 0x0778 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11 0x01B8 0x0480 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR 0x01B8 0x0480 0x0000 0x6 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x01BC 0x0484 0x061C 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK 0x01BC 0x0484 0x073C 0x1 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX 0x01BC 0x0484 0x0754 0x2 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX 0x01BC 0x0484 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK 0x01BC 0x0484 0x05F4 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET 0x01BC 0x0484 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12 0x01BC 0x0484 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x01BC 0x0484 0x0768 0x6 0x2 +#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x01C0 0x0488 0x0624 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 0x01C0 0x0488 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX 0x01C0 0x0488 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX 0x01C0 0x0488 0x0754 0x2 0x3 +#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC 0x01C0 0x0488 0x05F0 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT 0x01C0 0x0488 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x01C0 0x0488 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO 0x01C4 0x048C 0x0620 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 0x01C4 0x048C 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS 0x01C4 0x048C 0x0750 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS 0x01C4 0x048C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK 0x01C4 0x048C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP 0x01C4 0x048C 0x0774 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x01C4 0x048C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC 0x01C4 0x048C 0x076C 0x6 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0 0x01C8 0x0490 0x0628 0x0 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3 0x01C8 0x0490 0x0618 0x1 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS 0x01C8 0x0490 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS 0x01C8 0x0490 0x0750 0x2 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC 0x01C8 0x0490 0x05F8 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B 0x01C8 0x0490 0x0770 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x01C8 0x0490 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR 0x01C8 0x0490 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD1_CLK__SD1_CLK 0x01CC 0x0494 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CLK__KEY_COL0 0x01CC 0x0494 0x06A0 0x2 0x2 +#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4 0x01CC 0x0494 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15 0x01CC 0x0494 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_CMD__SD1_CMD 0x01D0 0x0498 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CMD__KEY_ROW0 0x01D0 0x0498 0x06C0 0x2 0x2 +#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5 0x01D0 0x0498 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14 0x01D0 0x0498 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x01D4 0x049C 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA0__KEY_COL1 0x01D4 0x049C 0x06A4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6 0x01D4 0x049C 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x01D4 0x049C 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x01D8 0x04A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1 0x01D8 0x04A0 0x06C4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7 0x01D8 0x04A0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x01D8 0x04A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x01DC 0x04A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA2__KEY_COL2 0x01DC 0x04A4 0x06A8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8 0x01DC 0x04A4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x01DC 0x04A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x01E0 0x04A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2 0x01E0 0x04A8 0x06C8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9 0x01E0 0x04A8 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x01E0 0x04A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x01E4 0x04AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA4__KEY_COL3 0x01E4 0x04AC 0x06AC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N 0x01E4 0x04AC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX 0x01E4 0x04AC 0x075C 0x4 0x6 +#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX 0x01E4 0x04AC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12 0x01E4 0x04AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x01E8 0x04B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3 0x01E8 0x04B0 0x06CC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED 0x01E8 0x04B0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX 0x01E8 0x04B0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX 0x01E8 0x04B0 0x075C 0x4 0x7 +#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09 0x01E8 0x04B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x01EC 0x04B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA6__KEY_COL4 0x01EC 0x04B4 0x06B0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ 0x01EC 0x04B4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS 0x01EC 0x04B4 0x0758 0x4 0x4 +#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS 0x01EC 0x04B4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x01EC 0x04B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x01F0 0x04B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4 0x01F0 0x04B8 0x06D0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY 0x01F0 0x04B8 0x05AC 0x3 0x3 +#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS 0x01F0 0x04B8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS 0x01F0 0x04B8 0x0758 0x4 0x5 +#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10 0x01F0 0x04B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_RESET__SD2_RESET 0x01F4 0x04BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_RESET__WDOG2_B 0x01F4 0x04BC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT 0x01F4 0x04BC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD2_RESET__CSI_MCLK 0x01F4 0x04BC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x01F4 0x04BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CLK__SD2_CLK 0x01F8 0x04C0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS 0x01F8 0x04C0 0x0570 0x1 0x1 +#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK 0x01F8 0x04C0 0x0630 0x2 0x1 +#define MX6SLL_PAD_SD2_CLK__CSI_DATA00 0x01F8 0x04C0 0x05C8 0x3 0x1 +#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x01F8 0x04C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CMD__SD2_CMD 0x01FC 0x04C4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CMD__AUD4_RXC 0x01FC 0x04C4 0x056C 0x1 0x1 +#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0 0x01FC 0x04C4 0x0648 0x2 0x1 +#define MX6SLL_PAD_SD2_CMD__CSI_DATA01 0x01FC 0x04C4 0x05CC 0x3 0x1 +#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT 0x01FC 0x04C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x01FC 0x04C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x0200 0x04C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD 0x0200 0x04C8 0x0564 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI 0x0200 0x04C8 0x063C 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02 0x0200 0x04C8 0x05D0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS 0x0200 0x04C8 0x0760 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS 0x0200 0x04C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x0200 0x04C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x0204 0x04CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC 0x0204 0x04CC 0x0574 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO 0x0204 0x04CC 0x0638 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03 0x0204 0x04CC 0x05D4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS 0x0204 0x04CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS 0x0204 0x04CC 0x0760 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x0204 0x04CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x0208 0x04D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS 0x0208 0x04D0 0x0578 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04 0x0208 0x04D0 0x05D8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX 0x0208 0x04D0 0x0764 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX 0x0208 0x04D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x0208 0x04D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x020C 0x04D4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD 0x020C 0x04D4 0x0568 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05 0x020C 0x04D4 0x05DC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX 0x020C 0x04D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX 0x020C 0x04D4 0x0764 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x020C 0x04D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x0210 0x04D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4 0x0210 0x04D8 0x0784 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX 0x0210 0x04D8 0x074C 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX 0x0210 0x04D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06 0x0210 0x04D8 0x05E0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x0210 0x04D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02 0x0210 0x04D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x0214 0x04DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5 0x0214 0x04DC 0x0788 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX 0x0214 0x04DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX 0x0214 0x04DC 0x074C 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07 0x0214 0x04DC 0x05E4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN 0x0214 0x04DC 0x0738 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31 0x0214 0x04DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x0218 0x04E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6 0x0218 0x04E0 0x078C 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS 0x0218 0x04E0 0x0748 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS 0x0218 0x04E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08 0x0218 0x04E0 0x05E8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA6__SD2_WP 0x0218 0x04E0 0x077C 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x0218 0x04E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x021C 0x04E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7 0x021C 0x04E4 0x0790 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS 0x021C 0x04E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS 0x021C 0x04E4 0x0748 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09 0x021C 0x04E4 0x05EC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B 0x021C 0x04E4 0x0778 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x021C 0x04E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__SD3_CLK 0x0220 0x04E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS 0x0220 0x04E8 0x0588 0x1 0x0 +#define MX6SLL_PAD_SD3_CLK__KEY_COL5 0x0220 0x04E8 0x0694 0x2 0x0 +#define MX6SLL_PAD_SD3_CLK__CSI_DATA10 0x0220 0x04E8 0x05B0 0x3 0x0 +#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB 0x0220 0x04E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x0220 0x04E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR 0x0220 0x04E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_CMD__SD3_CMD 0x0224 0x04EC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CMD__AUD5_RXC 0x0224 0x04EC 0x0584 0x1 0x0 +#define MX6SLL_PAD_SD3_CMD__KEY_ROW5 0x0224 0x04EC 0x06B4 0x2 0x0 +#define MX6SLL_PAD_SD3_CMD__CSI_DATA11 0x0224 0x04EC 0x05B4 0x3 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID 0x0224 0x04EC 0x0560 0x4 0x1 +#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x0224 0x04EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR 0x0224 0x04EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x0228 0x04F0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD 0x0228 0x04F0 0x057C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA0__KEY_COL6 0x0228 0x04F0 0x0698 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12 0x0228 0x04F0 0x05B8 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID 0x0228 0x04F0 0x055C 0x4 0x1 +#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x0228 0x04F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x022C 0x04F4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC 0x022C 0x04F4 0x058C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6 0x022C 0x04F4 0x06B8 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13 0x022C 0x04F4 0x05BC 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT 0x022C 0x04F4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x022C 0x04F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B 0x022C 0x04F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x0230 0x04F8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS 0x0230 0x04F8 0x0590 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA2__KEY_COL7 0x0230 0x04F8 0x069C 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14 0x0230 0x04F8 0x05C0 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT 0x0230 0x04F8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x0230 0x04F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC 0x0230 0x04F8 0x0768 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x0234 0x04FC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD 0x0234 0x04FC 0x0580 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7 0x0234 0x04FC 0x06BC 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15 0x0234 0x04FC 0x05C4 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT 0x0234 0x04FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x0234 0x04FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC 0x0234 0x04FC 0x076C 0x6 0x0 +#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE 0x0238 0x0500 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS 0x0238 0x0500 0x05A0 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0 0x0238 0x0500 0x065C 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1 0x0238 0x0500 0x0670 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x0238 0x0500 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x023C 0x0504 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC 0x023C 0x0504 0x059C 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK 0x023C 0x0504 0x0650 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2 0x023C 0x0504 0x0674 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x023C 0x0504 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE 0x0240 0x0508 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD 0x0240 0x0508 0x0594 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI 0x0240 0x0508 0x0658 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1 0x0240 0x0508 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x0240 0x0508 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC 0x0244 0x050C 0x05A4 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO 0x0244 0x050C 0x0654 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2 0x0244 0x050C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x0244 0x050C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS 0x0248 0x0510 0x05A8 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1 0x0248 0x0510 0x0660 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3 0x0248 0x0510 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18 0x0248 0x0510 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD 0x024C 0x0514 0x0598 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2 0x024C 0x0514 0x0664 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN 0x024C 0x0514 0x0678 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x024C 0x0514 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT 0x0250 0x0518 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET 0x0250 0x0518 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET 0x0250 0x0518 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x0250 0x0518 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID 0x0254 0x051C 0x055C 0x2 0x2 +#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT 0x0254 0x051C 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT 0x0254 0x051C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x0254 0x051C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN 0x0258 0x0520 0x0738 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD1_WP 0x0258 0x0520 0x0774 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD3_WP 0x0258 0x0520 0x0794 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x0258 0x0520 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT 0x025C 0x0524 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B 0x025C 0x0524 0x0770 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B 0x025C 0x0524 0x0780 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16 0x025C 0x0524 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B 0x0260 0x0528 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT 0x0260 0x0528 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY 0x0260 0x0528 0x05AC 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x0260 0x0528 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK 0x0260 0x0528 0x073C 0x6 0x0 + +#endif /* __DTS_IMX6SLL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi new file mode 100644 index 0000000..8eb9b7a --- /dev/null +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -0,0 +1,854 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/imx6sll-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx6sll-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi3 = &ecspi3; + spi4 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1225000 + 792000 1175000 + 396000 1075000 + 198000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1225000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + fsl,low-power-run; + clocks = <&clks IMX6SLL_CLK_ARM>, + <&clks IMX6SLL_CLK_PLL2_PFD2>, + <&clks IMX6SLL_CLK_STEP>, + <&clks IMX6SLL_CLK_PLL1_SW>, + <&clks IMX6SLL_CLK_PLL1_SYS>, + <&clks IMX6SLL_CLK_PLL1>, + <&clks IMX6SLL_PLL1_BYPASS>, + <&clks IMX6SLL_PLL1_BYPASS_SRC>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys", "pll1", "pll1_bypass", + "pll1_bypass_src"; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock@3 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + ocram: sram@00900000 { + compatible = "mmio-sram"; + reg = <0x00905000 0x20000>; + }; + + L2: l2-cache@00a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba: spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>, + <&clks IMX6SLL_CLK_OSC>, + <&clks IMX6SLL_CLK_SPDIF>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_IPG>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; + }; + + ecspi1: ecspi@02008000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI1>, + <&clks IMX6SLL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI2>, + <&clks IMX6SLL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI3>, + <&clks IMX6SLL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI4>, + <&clks IMX6SLL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@02018000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02018000 0x4000>; + interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART4_IPG>, + <&clks IMX6SLL_CLK_UART4_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART1_IPG>, + <&clks IMX6SLL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@02024000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02024000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART2_IPG>, + <&clks IMX6SLL_CLK_UART2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ssi1: ssi@02028000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 37 22 0>, <&sdma 38 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI1_IPG>, + <&clks IMX6SLL_CLK_SSI1>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi2: ssi2@0202c000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 41 22 0>, <&sdma 42 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI2_IPG>, + <&clks IMX6SLL_CLK_SSI2>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi3: ssi@02030000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 45 22 0>, <&sdma 46 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI3_IPG>, + <&clks IMX6SLL_CLK_SSI3>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + uart3: serial@02034000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02034000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-name = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART3_IPG>, + <&clks IMX6SLL_CLK_UART3_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + pwm1: pwm@02080000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM1>, + <&clks IMX6SLL_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm2: pwm@02084000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM2>, + <&clks IMX6SLL_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm3: pwm@02088000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM3>, + <&clks IMX6SLL_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm4: pwm@0208c000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM4>, + <&clks IMX6SLL_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + gpt1: gpt@02098000 { + compatible = "fsl,imx6sll-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPT_BUS>, + <&clks IMX6SLL_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@020b0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: kpp@020b8000 { + compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_KPP>; + status = "disabled"; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG1>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG2>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6sll-anatop", + "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x4000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + + reg_3p0: regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + }; + + tempmon: tempmon { + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + status = "disabled"; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY1>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY2>; + phy-reg_3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x61>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + }; + + src: src@020d8000 { + compatible = "fsl,imx6sll-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6sll-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@020e4000 { + compatible = "fsl,imx6sll-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + csi: csi@020e8000 { + compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi"; + reg = <0x020e8000 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_CSI>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "disp-axi", "csi_mclk", "disp_dcic"; + status = "disabled"; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_SDMA>, + <&clks IMX6SLL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + iram = <&ocram>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + + pxp: pxp@020f0000 { + compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma"; + reg = <0x020f0000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_PXP>; + clock-names = "pxp_ipg", "pxp_axi"; + status = "disabled"; + }; + + lcdif: lcdif@020f8000 { + compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif"; + reg = <0x020f8000 0x4000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>, + <&clks IMX6SLL_CLK_LCDIF_APB>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + dcp: dcp@020fc000 { + compatible = "fsl,imx6sl-dcp"; + reg = <0x020fc000 0x4000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DCP>; + clock-names = "dcp"; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc", + "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc3: usdhc@02198000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C3>; + status = "disabled"; + }; + + romcp@021ac000 { + compatible = "fsl,imx6sll-romcp", "syscon"; + reg = <0x021ac000 0x4000>; + }; + + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + rngb: rngb@021b4000 { + compatible = "fsl,imx6sl-rng", "fsl,imx-rng", "imx-rng"; + reg = <0x021b4000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>; + }; + + ocotp: ocotp-ctrl@021bc000 { + compatible = "fsl,imx6sll-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SLL_CLK_OCOTP>; + }; + + csu: csu@021c0000 { + compatible = "fsl,imx6sll-csu"; + reg = <0x021c0000 0x4000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + snvs_gpr: snvs-gpr@0x021c4000 { + compatible = "fsl, imx6sll-snvs-gpr"; + reg = <0x021c4000 0x10000>; + }; + + iomuxc_snvs: iomuxc-snvs@021c8000 { + compatible = "fsl,imx6sll-iomuxc-snvs"; + reg = <0x021c80000 0x10000>; + }; + + audmux: audmux@021d8000 { + compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART5_IPG>, + <&clks IMX6SLL_CLK_UART5_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + }; +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 05/11] ARM: dts: imx: Add basic dtsi for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Add basic dtsi and pinfunc header file for imx6sll Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/boot/dts/imx6sll-pinfunc.h | 882 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6sll.dtsi | 854 ++++++++++++++++++++++++++++++++++ 2 files changed, 1736 insertions(+) create mode 100644 arch/arm/boot/dts/imx6sll-pinfunc.h create mode 100644 arch/arm/boot/dts/imx6sll.dtsi diff --git a/arch/arm/boot/dts/imx6sll-pinfunc.h b/arch/arm/boot/dts/imx6sll-pinfunc.h new file mode 100644 index 0000000..5a3700b --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-pinfunc.h @@ -0,0 +1,882 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6SLL_PINFUNC_H +#define __DTS_IMX6SLL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6SLL_PAD_WDOG_B__WDOG1_B 0x0014 0x02DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x0014 0x02DC 0x0000 0x1 0x0 +#define MX6SLL_PAD_WDOG_B__UART5_RI_B 0x0014 0x02DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_WDOG_B__GPIO3_IO18 0x0014 0x02DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x0018 0x02E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x0018 0x02E0 0x068C 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT 0x0018 0x02E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID 0x0018 0x02E0 0x0560 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x0018 0x02E0 0x05AC 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21 0x0018 0x02E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__SD3_WP 0x0018 0x02E0 0x0794 0x6 0x0 +#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x001C 0x02E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x001C 0x02E4 0x0690 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT 0x001C 0x02E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID 0x001C 0x02E4 0x055C 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL 0x001C 0x02E4 0x0000 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x001C 0x02E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B 0x001C 0x02E4 0x0780 0x6 0x0 +#define MX6SLL_PAD_PWM1__PWM1_OUT 0x0020 0x02E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_PWM1__CCM_CLKO 0x0020 0x02E8 0x0000 0x1 0x0 +#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT 0x0020 0x02E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_PWM1__CSI_MCLK 0x0020 0x02E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_PWM1__GPIO3_IO23 0x0020 0x02E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_PWM1__EPIT1_OUT 0x0020 0x02E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL0__KEY_COL0 0x0024 0x02EC 0x06A0 0x0 0x0 +#define MX6SLL_PAD_KEY_COL0__I2C2_SCL 0x0024 0x02EC 0x0684 0x1 0x0 +#define MX6SLL_PAD_KEY_COL0__LCD_DATA00 0x0024 0x02EC 0x06D8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL0__SD1_CD_B 0x0024 0x02EC 0x0770 0x4 0x1 +#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24 0x0024 0x02EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0 0x0028 0x02F0 0x06C0 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA 0x0028 0x02F0 0x0688 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01 0x0028 0x02F0 0x06DC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW0__SD1_WP 0x0028 0x02F0 0x0774 0x4 0x1 +#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25 0x0028 0x02F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL1__KEY_COL1 0x002C 0x02F4 0x06A4 0x0 0x0 +#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI 0x002C 0x02F4 0x0658 0x1 0x1 +#define MX6SLL_PAD_KEY_COL1__LCD_DATA02 0x002C 0x02F4 0x06E0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL1__SD3_DATA4 0x002C 0x02F4 0x0784 0x4 0x0 +#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26 0x002C 0x02F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1 0x0030 0x02F8 0x06C4 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO 0x0030 0x02F8 0x0654 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03 0x0030 0x02F8 0x06E4 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD 0x0030 0x02F8 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5 0x0030 0x02F8 0x0788 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x0030 0x02F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL2__KEY_COL2 0x0034 0x02FC 0x06A8 0x0 0x0 +#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0 0x0034 0x02FC 0x065C 0x1 0x1 +#define MX6SLL_PAD_KEY_COL2__LCD_DATA04 0x0034 0x02FC 0x06E8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL2__CSI_DATA12 0x0034 0x02FC 0x05B8 0x3 0x1 +#define MX6SLL_PAD_KEY_COL2__SD3_DATA6 0x0034 0x02FC 0x078C 0x4 0x0 +#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x0034 0x02FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2 0x0038 0x0300 0x06C8 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK 0x0038 0x0300 0x0650 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05 0x0038 0x0300 0x06EC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13 0x0038 0x0300 0x05BC 0x3 0x1 +#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7 0x0038 0x0300 0x0790 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29 0x0038 0x0300 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__KEY_COL3 0x003C 0x0304 0x06AC 0x0 0x0 +#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS 0x003C 0x0304 0x05A0 0x1 0x1 +#define MX6SLL_PAD_KEY_COL3__LCD_DATA06 0x003C 0x0304 0x06F0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL3__CSI_DATA14 0x003C 0x0304 0x05C0 0x3 0x1 +#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x003C 0x0304 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__SD1_RESET 0x003C 0x0304 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3 0x0040 0x0308 0x06CC 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC 0x0040 0x0308 0x059C 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07 0x0040 0x0308 0x06F4 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15 0x0040 0x0308 0x05C4 0x3 0x2 +#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31 0x0040 0x0308 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT 0x0040 0x0308 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL4__KEY_COL4 0x0044 0x030C 0x06B0 0x0 0x1 +#define MX6SLL_PAD_KEY_COL4__AUD6_RXD 0x0044 0x030C 0x0594 0x1 0x1 +#define MX6SLL_PAD_KEY_COL4__LCD_DATA08 0x0044 0x030C 0x06F8 0x2 0x1 +#define MX6SLL_PAD_KEY_COL4__CSI_DATA16 0x0044 0x030C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x0044 0x030C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR 0x0044 0x030C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4 0x0048 0x0310 0x06D0 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC 0x0048 0x0310 0x05A4 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09 0x0048 0x0310 0x06FC 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17 0x0048 0x0310 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01 0x0048 0x0310 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC 0x0048 0x0310 0x076C 0x6 0x2 +#define MX6SLL_PAD_KEY_COL5__KEY_COL5 0x004C 0x0314 0x0694 0x0 0x1 +#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS 0x004C 0x0314 0x05A8 0x1 0x1 +#define MX6SLL_PAD_KEY_COL5__LCD_DATA10 0x004C 0x0314 0x0700 0x2 0x0 +#define MX6SLL_PAD_KEY_COL5__CSI_DATA18 0x004C 0x0314 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x004C 0x0314 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR 0x004C 0x0314 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5 0x0050 0x0318 0x06B4 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD 0x0050 0x0318 0x0598 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11 0x0050 0x0318 0x0704 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19 0x0050 0x0318 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x0050 0x0318 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC 0x0050 0x0318 0x0768 0x6 0x3 +#define MX6SLL_PAD_KEY_COL6__KEY_COL6 0x0054 0x031C 0x0698 0x0 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x0054 0x031C 0x075C 0x1 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX 0x0054 0x031C 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL6__LCD_DATA12 0x0054 0x031C 0x0708 0x2 0x1 +#define MX6SLL_PAD_KEY_COL6__CSI_DATA20 0x0054 0x031C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x0054 0x031C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL6__SD3_RESET 0x0054 0x031C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6 0x0058 0x0320 0x06B8 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x0058 0x0320 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX 0x0058 0x0320 0x075C 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13 0x0058 0x0320 0x070C 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21 0x0058 0x0320 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x0058 0x0320 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT 0x0058 0x0320 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL7__KEY_COL7 0x005C 0x0324 0x069C 0x0 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS 0x005C 0x0324 0x0758 0x1 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS 0x005C 0x0324 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL7__LCD_DATA14 0x005C 0x0324 0x0710 0x2 0x1 +#define MX6SLL_PAD_KEY_COL7__CSI_DATA22 0x005C 0x0324 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06 0x005C 0x0324 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL7__SD1_WP 0x005C 0x0324 0x0774 0x6 0x3 +#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7 0x0060 0x0328 0x06BC 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS 0x0060 0x0328 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS 0x0060 0x0328 0x0758 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15 0x0060 0x0328 0x0714 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23 0x0060 0x0328 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x0060 0x0328 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B 0x0060 0x0328 0x0770 0x6 0x3 +#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x0064 0x032C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI 0x0064 0x032C 0x0658 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24 0x0064 0x032C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00 0x0064 0x032C 0x05C8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07 0x0064 0x032C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x0068 0x0330 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO 0x0068 0x0330 0x0654 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25 0x0068 0x0330 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01 0x0068 0x0330 0x05CC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08 0x0068 0x0330 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x006C 0x0334 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0 0x006C 0x0334 0x065C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26 0x006C 0x0334 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x006C 0x0334 0x05D0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09 0x006C 0x0334 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x0070 0x0338 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK 0x0070 0x0338 0x0650 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27 0x0070 0x0338 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x0070 0x0338 0x05D4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10 0x0070 0x0338 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x0074 0x033C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1 0x0074 0x033C 0x0660 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28 0x0074 0x033C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x0074 0x033C 0x05D8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11 0x0074 0x033C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x0078 0x0340 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2 0x0078 0x0340 0x0664 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29 0x0078 0x0340 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x0078 0x0340 0x05DC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12 0x0078 0x0340 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x007C 0x0344 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3 0x007C 0x0344 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30 0x007C 0x0344 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x007C 0x0344 0x05E0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13 0x007C 0x0344 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x0080 0x0348 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY 0x0080 0x0348 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31 0x0080 0x0348 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x0080 0x0348 0x05E4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14 0x0080 0x0348 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x0084 0x034C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI 0x0084 0x034C 0x063C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0 0x0084 0x034C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15 0x0084 0x034C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x0088 0x0350 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO 0x0088 0x0350 0x0638 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1 0x0088 0x0350 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16 0x0088 0x0350 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x008C 0x0354 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0 0x008C 0x0354 0x0648 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2 0x008C 0x0354 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17 0x008C 0x0354 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x0090 0x0358 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK 0x0090 0x0358 0x0630 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3 0x0090 0x0358 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18 0x0090 0x0358 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x0094 0x035C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX 0x0094 0x035C 0x074C 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX 0x0094 0x035C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM 0x0094 0x035C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19 0x0094 0x035C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1 0x0094 0x035C 0x064C 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x0098 0x0360 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX 0x0098 0x0360 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX 0x0098 0x0360 0x074C 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ 0x0098 0x0360 0x0668 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20 0x0098 0x0360 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2 0x0098 0x0360 0x0640 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x009C 0x0364 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS 0x009C 0x0364 0x0748 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS 0x009C 0x0364 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT 0x009C 0x0364 0x066C 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21 0x009C 0x0364 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3 0x009C 0x0364 0x0644 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x00A0 0x0368 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS 0x00A0 0x0368 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS 0x00A0 0x0368 0x0748 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE 0x00A0 0x0368 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22 0x00A0 0x0368 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY 0x00A0 0x0368 0x0634 0x6 0x1 +#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x00A4 0x036C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI 0x00A4 0x036C 0x0624 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL 0x00A4 0x036C 0x0684 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x00A4 0x036C 0x05E8 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23 0x00A4 0x036C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x00A8 0x0370 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO 0x00A8 0x0370 0x0620 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA 0x00A8 0x0370 0x0688 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x00A8 0x0370 0x05EC 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24 0x00A8 0x0370 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x00AC 0x0374 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0 0x00AC 0x0374 0x0628 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10 0x00AC 0x0374 0x05B0 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x00AC 0x0374 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x00B0 0x0378 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK 0x00B0 0x0378 0x061C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4 0x00B0 0x0378 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11 0x00B0 0x0378 0x05B4 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x00B0 0x0378 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x00B4 0x037C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1 0x00B4 0x037C 0x062C 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT 0x00B4 0x037C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27 0x00B4 0x037C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x00B8 0x0380 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B 0x00B8 0x0380 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT 0x00B8 0x0380 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28 0x00B8 0x0380 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x00BC 0x0384 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL 0x00BC 0x0384 0x068C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT 0x00BC 0x0384 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29 0x00BC 0x0384 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3 0x00C0 0x0388 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA 0x00C0 0x0388 0x0690 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT 0x00C0 0x0388 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30 0x00C0 0x0388 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x00C4 0x038C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2 0x00C4 0x038C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x00C4 0x038C 0x05F4 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31 0x00C4 0x038C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET 0x00C4 0x038C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x00C8 0x0390 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3 0x00C8 0x0390 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x00C8 0x0390 0x05F0 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00 0x00C8 0x0390 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT 0x00C8 0x0390 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x00CC 0x0394 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY 0x00CC 0x0394 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x00CC 0x0394 0x0000 0x3 0x0 +#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01 0x00CC 0x0394 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDRL__SD2_WP 0x00CC 0x0394 0x077C 0x6 0x2 +#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x00D0 0x0398 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT 0x00D0 0x0398 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x00D0 0x0398 0x05F8 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02 0x00D0 0x0398 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B 0x00D0 0x0398 0x0778 0x6 0x2 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0 0x00D4 0x039C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS 0x00D4 0x039C 0x0588 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX 0x00D4 0x039C 0x0754 0x2 0x4 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX 0x00D4 0x039C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x00D4 0x039C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5 0x00D4 0x039C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1 0x00D8 0x03A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD 0x00D8 0x03A0 0x057C 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX 0x00D8 0x03A0 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX 0x00D8 0x03A0 0x0754 0x2 0x5 +#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x00D8 0x03A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6 0x00D8 0x03A0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0 0x00DC 0x03A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS 0x00DC 0x03A4 0x0750 0x2 0x2 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS 0x00DC 0x03A4 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05 0x00DC 0x03A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7 0x00DC 0x03A4 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1 0x00E0 0x03A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS 0x00E0 0x03A8 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS 0x00E0 0x03A8 0x0750 0x2 0x3 +#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06 0x00E0 0x03A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8 0x00E0 0x03A8 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0 0x00E4 0x03AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC 0x00E4 0x03AC 0x0584 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16 0x00E4 0x03AC 0x0718 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x00E4 0x03AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1 0x00E8 0x03B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS 0x00E8 0x03B0 0x0590 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17 0x00E8 0x03B0 0x071C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x00E8 0x03B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2 0x00EC 0x03B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD 0x00EC 0x03B4 0x0580 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18 0x00EC 0x03B4 0x0720 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09 0x00EC 0x03B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3 0x00F0 0x03B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC 0x00F0 0x03B8 0x058C 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19 0x00F0 0x03B8 0x0724 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x00F0 0x03B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM 0x00F4 0x03BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20 0x00F4 0x03BC 0x0728 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x00F4 0x03BC 0x055C 0x4 0x4 +#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11 0x00F4 0x03BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET 0x00F4 0x03BC 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ 0x00F8 0x03C0 0x0668 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21 0x00F8 0x03C0 0x072C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID 0x00F8 0x03C0 0x0560 0x4 0x3 +#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x00F8 0x03C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT 0x00F8 0x03C0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT 0x00FC 0x03C4 0x066C 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22 0x00FC 0x03C4 0x0730 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI 0x00FC 0x03C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x00FC 0x03C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP 0x00FC 0x03C4 0x0794 0x6 0x2 +#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE 0x0100 0x03C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23 0x0100 0x03C8 0x0734 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO 0x0100 0x03C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x0100 0x03C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B 0x0100 0x03C8 0x0780 0x6 0x2 +#define MX6SLL_PAD_LCD_CLK__LCD_CLK 0x0104 0x03CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN 0x0104 0x03CC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_CLK__PWM4_OUT 0x0104 0x03CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x0104 0x03CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x0108 0x03D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E 0x0108 0x03D0 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x0108 0x03D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x010C 0x03D4 0x06D4 0x0 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_CS 0x010C 0x03D4 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX 0x010C 0x03D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX 0x010C 0x03D4 0x074C 0x4 0x1 +#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x010C 0x03D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK 0x010C 0x03D4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x0110 0x03D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_RS 0x0110 0x03D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS 0x0110 0x03D8 0x0748 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS 0x0110 0x03D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x0110 0x03D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL 0x0110 0x03D8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_RESET 0x0114 0x03DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_BUSY 0x0114 0x03DC 0x06D4 0x2 0x1 +#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS 0x0114 0x03DC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS 0x0114 0x03DC 0x0748 0x4 0x1 +#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x0114 0x03DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY 0x0114 0x03DC 0x05AC 0x6 0x2 +#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x0118 0x03E0 0x06D8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI 0x0118 0x03E0 0x0608 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID 0x0118 0x03E0 0x0560 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03E0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B 0x0118 0x03E0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20 0x0118 0x03E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00 0x0118 0x03E0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00 0x0118 0x03E0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x011C 0x03E4 0x06DC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO 0x011C 0x03E4 0x0604 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID 0x011C 0x03E4 0x055C 0x2 0x3 +#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT 0x011C 0x03E4 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS 0x011C 0x03E4 0x0570 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x011C 0x03E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01 0x011C 0x03E4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01 0x011C 0x03E4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x0120 0x03E8 0x06E0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0 0x0120 0x03E8 0x0614 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT 0x0120 0x03E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03E8 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC 0x0120 0x03E8 0x056C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22 0x0120 0x03E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02 0x0120 0x03E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02 0x0120 0x03E8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x0124 0x03EC 0x06E4 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK 0x0124 0x03EC 0x05FC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B 0x0124 0x03EC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03EC 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD 0x0124 0x03EC 0x0564 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23 0x0124 0x03EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03 0x0124 0x03EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03 0x0124 0x03EC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x0128 0x03F0 0x06E8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1 0x0128 0x03F0 0x060C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC 0x0128 0x03F0 0x05F8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB 0x0128 0x03F0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC 0x0128 0x03F0 0x0574 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x0128 0x03F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04 0x0128 0x03F0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04 0x0128 0x03F0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x012C 0x03F4 0x06EC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2 0x012C 0x03F4 0x0610 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC 0x012C 0x03F4 0x05F0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS 0x012C 0x03F4 0x0578 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x012C 0x03F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05 0x012C 0x03F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05 0x012C 0x03F4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x0130 0x03F8 0x06F0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3 0x0130 0x03F8 0x0618 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK 0x0130 0x03F8 0x05F4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD 0x0130 0x03F8 0x0568 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x0130 0x03F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06 0x0130 0x03F8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06 0x0130 0x03F8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x0134 0x03FC 0x06F4 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY 0x0134 0x03FC 0x0600 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK 0x0134 0x03FC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT 0x0134 0x03FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x0134 0x03FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07 0x0134 0x03FC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07 0x0134 0x03FC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x0138 0x0400 0x06F8 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA08__KEY_COL0 0x0138 0x0400 0x06A0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09 0x0138 0x0400 0x05EC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK 0x0138 0x0400 0x061C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x0138 0x0400 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08 0x0138 0x0400 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08 0x0138 0x0400 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x013C 0x0404 0x06FC 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0 0x013C 0x0404 0x06C0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08 0x013C 0x0404 0x05E8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI 0x013C 0x0404 0x0624 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x013C 0x0404 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09 0x013C 0x0404 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09 0x013C 0x0404 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x0140 0x0408 0x0700 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA10__KEY_COL1 0x0140 0x0408 0x06A4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07 0x0140 0x0408 0x05E4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO 0x0140 0x0408 0x0620 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x0140 0x0408 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10 0x0140 0x0408 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10 0x0140 0x0408 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x0144 0x040C 0x0704 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1 0x0144 0x040C 0x06C4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06 0x0144 0x040C 0x05E0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1 0x0144 0x040C 0x062C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x0144 0x040C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11 0x0144 0x040C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11 0x0144 0x040C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x0148 0x0410 0x0708 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA12__KEY_COL2 0x0148 0x0410 0x06A8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05 0x0148 0x0410 0x05DC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS 0x0148 0x0410 0x0760 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS 0x0148 0x0410 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x0148 0x0410 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12 0x0148 0x0410 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12 0x0148 0x0410 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x014C 0x0414 0x070C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2 0x014C 0x0414 0x06C8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04 0x014C 0x0414 0x05D8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS 0x014C 0x0414 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS 0x014C 0x0414 0x0760 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x014C 0x0414 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13 0x014C 0x0414 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13 0x014C 0x0414 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x0150 0x0418 0x0710 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA14__KEY_COL3 0x0150 0x0418 0x06AC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03 0x0150 0x0418 0x05D4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX 0x0150 0x0418 0x0764 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX 0x0150 0x0418 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x0150 0x0418 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14 0x0150 0x0418 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14 0x0150 0x0418 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x0154 0x041C 0x0714 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3 0x0154 0x041C 0x06CC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02 0x0154 0x041C 0x05D0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX 0x0154 0x041C 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX 0x0154 0x041C 0x0764 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x0154 0x041C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15 0x0154 0x041C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15 0x0154 0x041C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x0158 0x0420 0x0718 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA16__KEY_COL4 0x0158 0x0420 0x06B0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x0420 0x05CC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL 0x0158 0x0420 0x0684 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x0158 0x0420 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24 0x0158 0x0420 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x015C 0x0424 0x071C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4 0x015C 0x0424 0x06D0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00 0x015C 0x0424 0x05C8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA 0x015C 0x0424 0x0688 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x015C 0x0424 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25 0x015C 0x0424 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x0160 0x0428 0x0720 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA18__KEY_COL5 0x0160 0x0428 0x0694 0x1 0x2 +#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15 0x0160 0x0428 0x05C4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1 0x0160 0x0428 0x0670 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x0160 0x0428 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26 0x0160 0x0428 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x0164 0x042C 0x0724 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5 0x0164 0x042C 0x06B4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14 0x0164 0x042C 0x05C0 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2 0x0164 0x042C 0x0674 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x0164 0x042C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27 0x0164 0x042C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x0168 0x0430 0x0728 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA20__KEY_COL6 0x0168 0x0430 0x0698 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13 0x0168 0x0430 0x05BC 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1 0x0168 0x0430 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x0168 0x0430 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28 0x0168 0x0430 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x016C 0x0434 0x072C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6 0x016C 0x0434 0x06B8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12 0x016C 0x0434 0x05B8 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2 0x016C 0x0434 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x016C 0x0434 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29 0x016C 0x0434 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x0170 0x0438 0x0730 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA22__KEY_COL7 0x0170 0x0438 0x069C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11 0x0170 0x0438 0x05B4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3 0x0170 0x0438 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x0170 0x0438 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30 0x0170 0x0438 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x0174 0x043C 0x0734 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7 0x0174 0x043C 0x06BC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10 0x0174 0x043C 0x05B0 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN 0x0174 0x043C 0x0678 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x0174 0x043C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31 0x0174 0x043C 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS 0x0178 0x0440 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL 0x0178 0x0440 0x067C 0x1 0x1 +#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX 0x0178 0x0440 0x0754 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX 0x0178 0x0440 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x0178 0x0440 0x068C 0x4 0x1 +#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00 0x0178 0x0440 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0 0x0178 0x0440 0x0648 0x6 0x0 +#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND 0x0178 0x0440 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXC__AUD3_RXC 0x017C 0x0444 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXC__I2C1_SDA 0x017C 0x0444 0x0680 0x1 0x1 +#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX 0x017C 0x0444 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX 0x017C 0x0444 0x0754 0x2 0x1 +#define MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x017C 0x0444 0x0690 0x4 0x1 +#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01 0x017C 0x0444 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1 0x017C 0x0444 0x064C 0x6 0x0 +#define MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x0180 0x0448 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI 0x0180 0x0448 0x063C 0x1 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX 0x0180 0x0448 0x075C 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX 0x0180 0x0448 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__SD1_LCTL 0x0180 0x0448 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02 0x0180 0x0448 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x0184 0x044C 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO 0x0184 0x044C 0x0638 0x1 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX 0x0184 0x044C 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX 0x0184 0x044C 0x075C 0x2 0x1 +#define MX6SLL_PAD_AUD_TXC__SD2_LCTL 0x0184 0x044C 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03 0x0184 0x044C 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x0188 0x0450 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT 0x0188 0x0450 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS 0x0188 0x0450 0x0758 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS 0x0188 0x0450 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL 0x0188 0x0450 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04 0x0188 0x0450 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x018C 0x0454 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK 0x018C 0x0454 0x0630 0x1 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS 0x018C 0x0454 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS 0x018C 0x0454 0x0758 0x2 0x1 +#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05 0x018C 0x0454 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x0190 0x0458 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT 0x0190 0x0458 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY 0x0190 0x0458 0x0634 0x2 0x0 +#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x0190 0x0458 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06 0x0190 0x0458 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x0190 0x0458 0x073C 0x6 0x1 +#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x0194 0x045C 0x0744 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX 0x0194 0x045C 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__PWM1_OUT 0x0194 0x045C 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX 0x0194 0x045C 0x075C 0x2 0x4 +#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX 0x0194 0x045C 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX 0x0194 0x045C 0x0764 0x4 0x6 +#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX 0x0194 0x045C 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16 0x0194 0x045C 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x0198 0x0460 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX 0x0198 0x0460 0x0744 0x0 0x1 +#define MX6SLL_PAD_UART1_TXD__PWM2_OUT 0x0198 0x0460 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX 0x0198 0x0460 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX 0x0198 0x0460 0x075C 0x2 0x5 +#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX 0x0198 0x0460 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX 0x0198 0x0460 0x0764 0x4 0x7 +#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17 0x0198 0x0460 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B 0x0198 0x0460 0x0000 0x7 0x0 +#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x019C 0x0464 0x067C 0x0 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS 0x019C 0x0464 0x0740 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS 0x019C 0x0464 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2 0x019C 0x0464 0x0640 0x2 0x0 +#define MX6SLL_PAD_I2C1_SCL__SD3_RESET 0x019C 0x0464 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12 0x019C 0x0464 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1 0x019C 0x0464 0x060C 0x6 0x0 +#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x01A0 0x0468 0x0680 0x0 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS 0x01A0 0x0468 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS 0x01A0 0x0468 0x0740 0x1 0x1 +#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3 0x01A0 0x0468 0x0644 0x2 0x0 +#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT 0x01A0 0x0468 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13 0x01A0 0x0468 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2 0x01A0 0x0468 0x0610 0x6 0x0 +#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x01A4 0x046C 0x0684 0x0 0x3 +#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS 0x01A4 0x046C 0x0570 0x1 0x2 +#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN 0x01A4 0x046C 0x0738 0x2 0x2 +#define MX6SLL_PAD_I2C2_SCL__SD3_WP 0x01A4 0x046C 0x0794 0x4 0x3 +#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14 0x01A4 0x046C 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY 0x01A4 0x046C 0x0600 0x6 0x1 +#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x01A8 0x0470 0x0688 0x0 0x3 +#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC 0x01A8 0x0470 0x056C 0x1 0x2 +#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT 0x01A8 0x0470 0x0000 0x2 0x0 +#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B 0x01A8 0x0470 0x0780 0x4 0x3 +#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15 0x01A8 0x0470 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x01AC 0x0474 0x05FC 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD 0x01AC 0x0474 0x0568 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x01AC 0x0474 0x0764 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x01AC 0x0474 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0 0x01AC 0x0474 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET 0x01AC 0x0474 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x01AC 0x0474 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x01AC 0x0474 0x0768 0x6 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x01B0 0x0478 0x0608 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC 0x01B0 0x0478 0x0574 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x01B0 0x0478 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x01B0 0x0478 0x0764 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1 0x01B0 0x0478 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT 0x01B0 0x0478 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09 0x01B0 0x0478 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x01B4 0x047C 0x0604 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS 0x01B4 0x047C 0x0578 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x01B4 0x047C 0x0760 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x01B4 0x047C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0 0x01B4 0x047C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP 0x01B4 0x047C 0x077C 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10 0x01B4 0x047C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0 0x01B8 0x0480 0x0614 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD 0x01B8 0x0480 0x0564 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x01B8 0x0480 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x01B8 0x0480 0x0760 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1 0x01B8 0x0480 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B 0x01B8 0x0480 0x0778 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11 0x01B8 0x0480 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR 0x01B8 0x0480 0x0000 0x6 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x01BC 0x0484 0x061C 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK 0x01BC 0x0484 0x073C 0x1 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX 0x01BC 0x0484 0x0754 0x2 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX 0x01BC 0x0484 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK 0x01BC 0x0484 0x05F4 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET 0x01BC 0x0484 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12 0x01BC 0x0484 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x01BC 0x0484 0x0768 0x6 0x2 +#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x01C0 0x0488 0x0624 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 0x01C0 0x0488 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX 0x01C0 0x0488 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX 0x01C0 0x0488 0x0754 0x2 0x3 +#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC 0x01C0 0x0488 0x05F0 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT 0x01C0 0x0488 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x01C0 0x0488 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO 0x01C4 0x048C 0x0620 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 0x01C4 0x048C 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS 0x01C4 0x048C 0x0750 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS 0x01C4 0x048C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK 0x01C4 0x048C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP 0x01C4 0x048C 0x0774 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x01C4 0x048C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC 0x01C4 0x048C 0x076C 0x6 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0 0x01C8 0x0490 0x0628 0x0 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3 0x01C8 0x0490 0x0618 0x1 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS 0x01C8 0x0490 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS 0x01C8 0x0490 0x0750 0x2 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC 0x01C8 0x0490 0x05F8 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B 0x01C8 0x0490 0x0770 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x01C8 0x0490 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR 0x01C8 0x0490 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD1_CLK__SD1_CLK 0x01CC 0x0494 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CLK__KEY_COL0 0x01CC 0x0494 0x06A0 0x2 0x2 +#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4 0x01CC 0x0494 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15 0x01CC 0x0494 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_CMD__SD1_CMD 0x01D0 0x0498 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CMD__KEY_ROW0 0x01D0 0x0498 0x06C0 0x2 0x2 +#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5 0x01D0 0x0498 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14 0x01D0 0x0498 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x01D4 0x049C 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA0__KEY_COL1 0x01D4 0x049C 0x06A4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6 0x01D4 0x049C 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x01D4 0x049C 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x01D8 0x04A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1 0x01D8 0x04A0 0x06C4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7 0x01D8 0x04A0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x01D8 0x04A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x01DC 0x04A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA2__KEY_COL2 0x01DC 0x04A4 0x06A8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8 0x01DC 0x04A4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x01DC 0x04A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x01E0 0x04A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2 0x01E0 0x04A8 0x06C8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9 0x01E0 0x04A8 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x01E0 0x04A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x01E4 0x04AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA4__KEY_COL3 0x01E4 0x04AC 0x06AC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N 0x01E4 0x04AC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX 0x01E4 0x04AC 0x075C 0x4 0x6 +#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX 0x01E4 0x04AC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12 0x01E4 0x04AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x01E8 0x04B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3 0x01E8 0x04B0 0x06CC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED 0x01E8 0x04B0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX 0x01E8 0x04B0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX 0x01E8 0x04B0 0x075C 0x4 0x7 +#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09 0x01E8 0x04B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x01EC 0x04B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA6__KEY_COL4 0x01EC 0x04B4 0x06B0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ 0x01EC 0x04B4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS 0x01EC 0x04B4 0x0758 0x4 0x4 +#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS 0x01EC 0x04B4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x01EC 0x04B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x01F0 0x04B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4 0x01F0 0x04B8 0x06D0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY 0x01F0 0x04B8 0x05AC 0x3 0x3 +#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS 0x01F0 0x04B8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS 0x01F0 0x04B8 0x0758 0x4 0x5 +#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10 0x01F0 0x04B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_RESET__SD2_RESET 0x01F4 0x04BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_RESET__WDOG2_B 0x01F4 0x04BC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT 0x01F4 0x04BC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD2_RESET__CSI_MCLK 0x01F4 0x04BC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x01F4 0x04BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CLK__SD2_CLK 0x01F8 0x04C0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS 0x01F8 0x04C0 0x0570 0x1 0x1 +#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK 0x01F8 0x04C0 0x0630 0x2 0x1 +#define MX6SLL_PAD_SD2_CLK__CSI_DATA00 0x01F8 0x04C0 0x05C8 0x3 0x1 +#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x01F8 0x04C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CMD__SD2_CMD 0x01FC 0x04C4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CMD__AUD4_RXC 0x01FC 0x04C4 0x056C 0x1 0x1 +#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0 0x01FC 0x04C4 0x0648 0x2 0x1 +#define MX6SLL_PAD_SD2_CMD__CSI_DATA01 0x01FC 0x04C4 0x05CC 0x3 0x1 +#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT 0x01FC 0x04C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x01FC 0x04C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x0200 0x04C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD 0x0200 0x04C8 0x0564 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI 0x0200 0x04C8 0x063C 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02 0x0200 0x04C8 0x05D0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS 0x0200 0x04C8 0x0760 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS 0x0200 0x04C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x0200 0x04C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x0204 0x04CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC 0x0204 0x04CC 0x0574 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO 0x0204 0x04CC 0x0638 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03 0x0204 0x04CC 0x05D4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS 0x0204 0x04CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS 0x0204 0x04CC 0x0760 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x0204 0x04CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x0208 0x04D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS 0x0208 0x04D0 0x0578 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04 0x0208 0x04D0 0x05D8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX 0x0208 0x04D0 0x0764 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX 0x0208 0x04D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x0208 0x04D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x020C 0x04D4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD 0x020C 0x04D4 0x0568 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05 0x020C 0x04D4 0x05DC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX 0x020C 0x04D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX 0x020C 0x04D4 0x0764 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x020C 0x04D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x0210 0x04D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4 0x0210 0x04D8 0x0784 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX 0x0210 0x04D8 0x074C 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX 0x0210 0x04D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06 0x0210 0x04D8 0x05E0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x0210 0x04D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02 0x0210 0x04D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x0214 0x04DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5 0x0214 0x04DC 0x0788 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX 0x0214 0x04DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX 0x0214 0x04DC 0x074C 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07 0x0214 0x04DC 0x05E4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN 0x0214 0x04DC 0x0738 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31 0x0214 0x04DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x0218 0x04E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6 0x0218 0x04E0 0x078C 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS 0x0218 0x04E0 0x0748 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS 0x0218 0x04E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08 0x0218 0x04E0 0x05E8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA6__SD2_WP 0x0218 0x04E0 0x077C 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x0218 0x04E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x021C 0x04E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7 0x021C 0x04E4 0x0790 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS 0x021C 0x04E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS 0x021C 0x04E4 0x0748 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09 0x021C 0x04E4 0x05EC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B 0x021C 0x04E4 0x0778 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x021C 0x04E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__SD3_CLK 0x0220 0x04E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS 0x0220 0x04E8 0x0588 0x1 0x0 +#define MX6SLL_PAD_SD3_CLK__KEY_COL5 0x0220 0x04E8 0x0694 0x2 0x0 +#define MX6SLL_PAD_SD3_CLK__CSI_DATA10 0x0220 0x04E8 0x05B0 0x3 0x0 +#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB 0x0220 0x04E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x0220 0x04E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR 0x0220 0x04E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_CMD__SD3_CMD 0x0224 0x04EC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CMD__AUD5_RXC 0x0224 0x04EC 0x0584 0x1 0x0 +#define MX6SLL_PAD_SD3_CMD__KEY_ROW5 0x0224 0x04EC 0x06B4 0x2 0x0 +#define MX6SLL_PAD_SD3_CMD__CSI_DATA11 0x0224 0x04EC 0x05B4 0x3 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID 0x0224 0x04EC 0x0560 0x4 0x1 +#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x0224 0x04EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR 0x0224 0x04EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x0228 0x04F0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD 0x0228 0x04F0 0x057C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA0__KEY_COL6 0x0228 0x04F0 0x0698 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12 0x0228 0x04F0 0x05B8 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID 0x0228 0x04F0 0x055C 0x4 0x1 +#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x0228 0x04F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x022C 0x04F4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC 0x022C 0x04F4 0x058C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6 0x022C 0x04F4 0x06B8 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13 0x022C 0x04F4 0x05BC 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT 0x022C 0x04F4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x022C 0x04F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B 0x022C 0x04F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x0230 0x04F8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS 0x0230 0x04F8 0x0590 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA2__KEY_COL7 0x0230 0x04F8 0x069C 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14 0x0230 0x04F8 0x05C0 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT 0x0230 0x04F8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x0230 0x04F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC 0x0230 0x04F8 0x0768 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x0234 0x04FC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD 0x0234 0x04FC 0x0580 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7 0x0234 0x04FC 0x06BC 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15 0x0234 0x04FC 0x05C4 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT 0x0234 0x04FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x0234 0x04FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC 0x0234 0x04FC 0x076C 0x6 0x0 +#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE 0x0238 0x0500 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS 0x0238 0x0500 0x05A0 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0 0x0238 0x0500 0x065C 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1 0x0238 0x0500 0x0670 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x0238 0x0500 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x023C 0x0504 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC 0x023C 0x0504 0x059C 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK 0x023C 0x0504 0x0650 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2 0x023C 0x0504 0x0674 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x023C 0x0504 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE 0x0240 0x0508 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD 0x0240 0x0508 0x0594 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI 0x0240 0x0508 0x0658 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1 0x0240 0x0508 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x0240 0x0508 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC 0x0244 0x050C 0x05A4 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO 0x0244 0x050C 0x0654 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2 0x0244 0x050C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x0244 0x050C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS 0x0248 0x0510 0x05A8 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1 0x0248 0x0510 0x0660 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3 0x0248 0x0510 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18 0x0248 0x0510 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD 0x024C 0x0514 0x0598 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2 0x024C 0x0514 0x0664 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN 0x024C 0x0514 0x0678 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x024C 0x0514 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT 0x0250 0x0518 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET 0x0250 0x0518 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET 0x0250 0x0518 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x0250 0x0518 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID 0x0254 0x051C 0x055C 0x2 0x2 +#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT 0x0254 0x051C 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT 0x0254 0x051C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x0254 0x051C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN 0x0258 0x0520 0x0738 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD1_WP 0x0258 0x0520 0x0774 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD3_WP 0x0258 0x0520 0x0794 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x0258 0x0520 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT 0x025C 0x0524 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B 0x025C 0x0524 0x0770 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B 0x025C 0x0524 0x0780 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16 0x025C 0x0524 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B 0x0260 0x0528 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT 0x0260 0x0528 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY 0x0260 0x0528 0x05AC 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x0260 0x0528 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK 0x0260 0x0528 0x073C 0x6 0x0 + +#endif /* __DTS_IMX6SLL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi new file mode 100644 index 0000000..8eb9b7a --- /dev/null +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -0,0 +1,854 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/imx6sll-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx6sll-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi3 = &ecspi3; + spi4 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1225000 + 792000 1175000 + 396000 1075000 + 198000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1225000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + fsl,low-power-run; + clocks = <&clks IMX6SLL_CLK_ARM>, + <&clks IMX6SLL_CLK_PLL2_PFD2>, + <&clks IMX6SLL_CLK_STEP>, + <&clks IMX6SLL_CLK_PLL1_SW>, + <&clks IMX6SLL_CLK_PLL1_SYS>, + <&clks IMX6SLL_CLK_PLL1>, + <&clks IMX6SLL_PLL1_BYPASS>, + <&clks IMX6SLL_PLL1_BYPASS_SRC>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys", "pll1", "pll1_bypass", + "pll1_bypass_src"; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock@3 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + ocram: sram@00900000 { + compatible = "mmio-sram"; + reg = <0x00905000 0x20000>; + }; + + L2: l2-cache@00a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba: spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>, + <&clks IMX6SLL_CLK_OSC>, + <&clks IMX6SLL_CLK_SPDIF>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_IPG>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; + }; + + ecspi1: ecspi@02008000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI1>, + <&clks IMX6SLL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI2>, + <&clks IMX6SLL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI3>, + <&clks IMX6SLL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI4>, + <&clks IMX6SLL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@02018000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02018000 0x4000>; + interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART4_IPG>, + <&clks IMX6SLL_CLK_UART4_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART1_IPG>, + <&clks IMX6SLL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@02024000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02024000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART2_IPG>, + <&clks IMX6SLL_CLK_UART2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ssi1: ssi@02028000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 37 22 0>, <&sdma 38 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI1_IPG>, + <&clks IMX6SLL_CLK_SSI1>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi2: ssi2@0202c000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 41 22 0>, <&sdma 42 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI2_IPG>, + <&clks IMX6SLL_CLK_SSI2>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi3: ssi@02030000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 45 22 0>, <&sdma 46 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI3_IPG>, + <&clks IMX6SLL_CLK_SSI3>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + uart3: serial@02034000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02034000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-name = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART3_IPG>, + <&clks IMX6SLL_CLK_UART3_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + pwm1: pwm@02080000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM1>, + <&clks IMX6SLL_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm2: pwm@02084000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM2>, + <&clks IMX6SLL_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm3: pwm@02088000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM3>, + <&clks IMX6SLL_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm4: pwm@0208c000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM4>, + <&clks IMX6SLL_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + gpt1: gpt@02098000 { + compatible = "fsl,imx6sll-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPT_BUS>, + <&clks IMX6SLL_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@020b0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: kpp@020b8000 { + compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_KPP>; + status = "disabled"; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG1>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG2>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6sll-anatop", + "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x4000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + + reg_3p0: regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + }; + + tempmon: tempmon { + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + status = "disabled"; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY1>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY2>; + phy-reg_3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x61>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + }; + + src: src@020d8000 { + compatible = "fsl,imx6sll-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6sll-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@020e4000 { + compatible = "fsl,imx6sll-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + csi: csi@020e8000 { + compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi"; + reg = <0x020e8000 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_CSI>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "disp-axi", "csi_mclk", "disp_dcic"; + status = "disabled"; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_SDMA>, + <&clks IMX6SLL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + iram = <&ocram>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + + pxp: pxp@020f0000 { + compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma"; + reg = <0x020f0000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_PXP>; + clock-names = "pxp_ipg", "pxp_axi"; + status = "disabled"; + }; + + lcdif: lcdif@020f8000 { + compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif"; + reg = <0x020f8000 0x4000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>, + <&clks IMX6SLL_CLK_LCDIF_APB>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + dcp: dcp@020fc000 { + compatible = "fsl,imx6sl-dcp"; + reg = <0x020fc000 0x4000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DCP>; + clock-names = "dcp"; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc", + "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc3: usdhc@02198000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C3>; + status = "disabled"; + }; + + romcp@021ac000 { + compatible = "fsl,imx6sll-romcp", "syscon"; + reg = <0x021ac000 0x4000>; + }; + + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + rngb: rngb@021b4000 { + compatible = "fsl,imx6sl-rng", "fsl,imx-rng", "imx-rng"; + reg = <0x021b4000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>; + }; + + ocotp: ocotp-ctrl@021bc000 { + compatible = "fsl,imx6sll-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SLL_CLK_OCOTP>; + }; + + csu: csu@021c0000 { + compatible = "fsl,imx6sll-csu"; + reg = <0x021c0000 0x4000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + snvs_gpr: snvs-gpr@0x021c4000 { + compatible = "fsl, imx6sll-snvs-gpr"; + reg = <0x021c4000 0x10000>; + }; + + iomuxc_snvs: iomuxc-snvs@021c8000 { + compatible = "fsl,imx6sll-iomuxc-snvs"; + reg = <0x021c80000 0x10000>; + }; + + audmux: audmux@021d8000 { + compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART5_IPG>, + <&clks IMX6SLL_CLK_UART5_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + }; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-02 6:39 ` Bai Ping -1 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: devicetree, kernel, daniel.lezcano, linux-gpio, p.zabel, fabio.estevam, tglx, linux-clk, linux-arm-kernel, ping.bai Add basic dts support for imx6sll EVK baoard. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6sll-evk.dts | 652 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 654 insertions(+) create mode 100644 arch/arm/boot/dts/imx6sll-evk.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c595d..24eb4bd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -416,6 +416,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb +dtb-$(CONFIG_SOC_IMX6SLL) += \ + imx6sll-evk.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts new file mode 100644 index 0000000..2a624cb --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -0,0 +1,652 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sll.dtsi" + +/ { + model = "Freescale i.MX6SLL EVK Board"; + compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + battery: max8903@0 { + compatible = "fsl,max8903-charger"; + pinctrl-names = "default"; + dok_input = <&gpio4 13 1>; + uok_input = <&gpio4 13 1>; + chg_input = <&gpio4 15 1>; + flt_input = <&gpio4 14 1>; + fsl,dcm_always_high; + fsl,dc_valid; + fsl,adc_disable; + status = "okay"; + }; + + pxp_v4l2_out { + compatible = "fsl,imx6sl-pxp-v4l2"; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_aud3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-pwr"; + gpio = <&gpio4 8 0>; + enable-active-high; + }; + + reg_sd1_vmmc: sd1_vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sd3_vmmc: sd3_vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD3_WIFI"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + cpu-dai = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + codec-master; + hp-det-gpios = <&gpio4 24 1>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux3>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <393216000>; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; + soc-supply = <&sw1c_reg>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + max17135: max17135@48 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max17135>; + compatible = "maxim,max17135"; + reg = <0x48>; + status = "okay"; + + vneg_pwrup = <1>; + gvee_pwrup = <2>; + vpos_pwrup = <10>; + gvdd_pwrup = <12>; + gvdd_pwrdn = <1>; + vpos_pwrdn = <2>; + gvee_pwrdn = <8>; + vneg_pwrdn = <10>; + gpio_pmic_pwrgood = <&gpio2 13 0>; + gpio_pmic_vcom_ctrl = <&gpio2 3 0>; + gpio_pmic_wakeup = <&gpio2 14 0>; + gpio_pmic_v3p3 = <&gpio2 7 0>; + gpio_pmic_intr = <&gpio2 12 0>; + + regulators { + DISPLAY_reg: DISPLAY { + regulator-name = "DISPLAY"; + }; + + GVDD_reg: GVDD { + /* 20v */ + regulator-name = "GVDD"; + }; + + GVEE_reg: GVEE { + /* -22v */ + regulator-name = "GVEE"; + }; + + HVINN_reg: HVINN { + /* -22v */ + regulator-name = "HVINN"; + }; + + HVINP_reg: HVINP { + /* 20v */ + regulator-name = "HVINP"; + }; + + VCOM_reg: VCOM { + regulator-name = "VCOM"; + /* 2's-compliment, -4325000 */ + regulator-min-microvolt = <0xffbe0178>; + /* 2's-compliment, -500000 */ + regulator-max-microvolt = <0xfff85ee0>; + }; + + VNEG_reg: VNEG { + /* -15v */ + regulator-name = "VNEG"; + }; + + VPOS_reg: VPOS { + /* 15v */ + regulator-name = "VPOS"; + }; + + V3P3_reg: V3P3 { + regulator-name = "V3P3"; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>; + DCVDD-supply = <&vgen3_reg>; + DBVDD-supply = <®_aud3v>; + AVDD-supply = <&vgen3_reg>; + CPVDD-supply = <&vgen3_reg>; + MICVDD-supply = <®_aud3v>; + PLLVDD-supply = <&vgen3_reg>; + SPKVDD1-supply = <®_aud4v>; + SPKVDD2-supply = <®_aud4v>; + amic-mono; + }; +}; + +&gpc { + fsl,ldo-bypass = <1>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 + MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059 + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059 + /* + * Must set the LVE of pad SD2_RESET, otherwise current + * leakage through eMMC chip will pull high the VCCQ to + * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch. + */ + MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x417059 + MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 /* SD3 CD */ + MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 /*SD3 RESET */ + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 + MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */ + /* CHG_FLT, CHG_UOK/DOK, CHG_STATUS */ + MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000 + MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000 + MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000 + >; + }; + + pinctrl_audmux3: audmux3grp { + fsl,pins = < + MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 + MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 + MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 + MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 + MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + >; + }; + + pinctrl_csi1: csi1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x1b088 + MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x1b088 + MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x1b088 + MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x1b088 + MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x1b088 + MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x1b088 + MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x1b088 + MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x1b088 + MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x1b088 + MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x1b088 + MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x1b088 + MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x1b088 + MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x80000000 + MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x80000000 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79 + MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79 + MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79 + MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79 + MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79 + MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79 + MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79 + MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79 + MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79 + MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79 + MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79 + MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79 + MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x79 + >; + }; + + pinctrl_max17135: max17135grp-1 { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x80000000 /* pwrgood */ + MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000 /* vcom_ctrl */ + MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x80000000 /* wakeup */ + MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x80000000 /* v3p3 */ + MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x80000000 /* pwr int */ + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x4130b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1 + MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1 + >; + }; + + pinctrl_pwm1: pmw1grp { + fsl,pins = < + MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + lcd-supply = <®_lcd>; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pxp { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: linux-arm-kernel Add basic dts support for imx6sll EVK baoard. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6sll-evk.dts | 652 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 654 insertions(+) create mode 100644 arch/arm/boot/dts/imx6sll-evk.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c595d..24eb4bd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -416,6 +416,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb +dtb-$(CONFIG_SOC_IMX6SLL) += \ + imx6sll-evk.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts new file mode 100644 index 0000000..2a624cb --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -0,0 +1,652 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sll.dtsi" + +/ { + model = "Freescale i.MX6SLL EVK Board"; + compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + battery: max8903 at 0 { + compatible = "fsl,max8903-charger"; + pinctrl-names = "default"; + dok_input = <&gpio4 13 1>; + uok_input = <&gpio4 13 1>; + chg_input = <&gpio4 15 1>; + flt_input = <&gpio4 14 1>; + fsl,dcm_always_high; + fsl,dc_valid; + fsl,adc_disable; + status = "okay"; + }; + + pxp_v4l2_out { + compatible = "fsl,imx6sl-pxp-v4l2"; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator at 0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator at 1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_aud3v: regulator at 2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator at 3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd: regulator at 4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-pwr"; + gpio = <&gpio4 8 0>; + enable-active-high; + }; + + reg_sd1_vmmc: sd1_vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sd3_vmmc: sd3_vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD3_WIFI"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + cpu-dai = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + codec-master; + hp-det-gpios = <&gpio4 24 1>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux3>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <393216000>; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; + soc-supply = <&sw1c_reg>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100 at 08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + max17135: max17135 at 48 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max17135>; + compatible = "maxim,max17135"; + reg = <0x48>; + status = "okay"; + + vneg_pwrup = <1>; + gvee_pwrup = <2>; + vpos_pwrup = <10>; + gvdd_pwrup = <12>; + gvdd_pwrdn = <1>; + vpos_pwrdn = <2>; + gvee_pwrdn = <8>; + vneg_pwrdn = <10>; + gpio_pmic_pwrgood = <&gpio2 13 0>; + gpio_pmic_vcom_ctrl = <&gpio2 3 0>; + gpio_pmic_wakeup = <&gpio2 14 0>; + gpio_pmic_v3p3 = <&gpio2 7 0>; + gpio_pmic_intr = <&gpio2 12 0>; + + regulators { + DISPLAY_reg: DISPLAY { + regulator-name = "DISPLAY"; + }; + + GVDD_reg: GVDD { + /* 20v */ + regulator-name = "GVDD"; + }; + + GVEE_reg: GVEE { + /* -22v */ + regulator-name = "GVEE"; + }; + + HVINN_reg: HVINN { + /* -22v */ + regulator-name = "HVINN"; + }; + + HVINP_reg: HVINP { + /* 20v */ + regulator-name = "HVINP"; + }; + + VCOM_reg: VCOM { + regulator-name = "VCOM"; + /* 2's-compliment, -4325000 */ + regulator-min-microvolt = <0xffbe0178>; + /* 2's-compliment, -500000 */ + regulator-max-microvolt = <0xfff85ee0>; + }; + + VNEG_reg: VNEG { + /* -15v */ + regulator-name = "VNEG"; + }; + + VPOS_reg: VPOS { + /* 15v */ + regulator-name = "VPOS"; + }; + + V3P3_reg: V3P3 { + regulator-name = "V3P3"; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + codec: wm8962 at 1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>; + DCVDD-supply = <&vgen3_reg>; + DBVDD-supply = <®_aud3v>; + AVDD-supply = <&vgen3_reg>; + CPVDD-supply = <&vgen3_reg>; + MICVDD-supply = <®_aud3v>; + PLLVDD-supply = <&vgen3_reg>; + SPKVDD1-supply = <®_aud4v>; + SPKVDD2-supply = <®_aud4v>; + amic-mono; + }; +}; + +&gpc { + fsl,ldo-bypass = <1>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 + MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059 + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059 + /* + * Must set the LVE of pad SD2_RESET, otherwise current + * leakage through eMMC chip will pull high the VCCQ to + * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch. + */ + MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x417059 + MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 /* SD3 CD */ + MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 /*SD3 RESET */ + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 + MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */ + /* CHG_FLT, CHG_UOK/DOK, CHG_STATUS */ + MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000 + MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000 + MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000 + >; + }; + + pinctrl_audmux3: audmux3grp { + fsl,pins = < + MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 + MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 + MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 + MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 + MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + >; + }; + + pinctrl_csi1: csi1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x1b088 + MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x1b088 + MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x1b088 + MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x1b088 + MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x1b088 + MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x1b088 + MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x1b088 + MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x1b088 + MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x1b088 + MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x1b088 + MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x1b088 + MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x1b088 + MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x80000000 + MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x80000000 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79 + MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79 + MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79 + MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79 + MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79 + MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79 + MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79 + MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79 + MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79 + MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79 + MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79 + MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79 + MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x79 + >; + }; + + pinctrl_max17135: max17135grp-1 { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x80000000 /* pwrgood */ + MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000 /* vcom_ctrl */ + MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x80000000 /* wakeup */ + MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x80000000 /* v3p3 */ + MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x80000000 /* pwr int */ + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x4130b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1 + MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1 + >; + }; + + pinctrl_pwm1: pmw1grp { + fsl,pins = < + MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + lcd-supply = <®_lcd>; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pxp { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Add basic dts support for imx6sll EVK baoard. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6sll-evk.dts | 652 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 654 insertions(+) create mode 100644 arch/arm/boot/dts/imx6sll-evk.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c595d..24eb4bd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -416,6 +416,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb +dtb-$(CONFIG_SOC_IMX6SLL) += \ + imx6sll-evk.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts new file mode 100644 index 0000000..2a624cb --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -0,0 +1,652 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sll.dtsi" + +/ { + model = "Freescale i.MX6SLL EVK Board"; + compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + battery: max8903@0 { + compatible = "fsl,max8903-charger"; + pinctrl-names = "default"; + dok_input = <&gpio4 13 1>; + uok_input = <&gpio4 13 1>; + chg_input = <&gpio4 15 1>; + flt_input = <&gpio4 14 1>; + fsl,dcm_always_high; + fsl,dc_valid; + fsl,adc_disable; + status = "okay"; + }; + + pxp_v4l2_out { + compatible = "fsl,imx6sl-pxp-v4l2"; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_aud3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-pwr"; + gpio = <&gpio4 8 0>; + enable-active-high; + }; + + reg_sd1_vmmc: sd1_vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sd3_vmmc: sd3_vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD3_WIFI"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + cpu-dai = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <3>; + codec-master; + hp-det-gpios = <&gpio4 24 1>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux3>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <393216000>; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; + soc-supply = <&sw1c_reg>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + max17135: max17135@48 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max17135>; + compatible = "maxim,max17135"; + reg = <0x48>; + status = "okay"; + + vneg_pwrup = <1>; + gvee_pwrup = <2>; + vpos_pwrup = <10>; + gvdd_pwrup = <12>; + gvdd_pwrdn = <1>; + vpos_pwrdn = <2>; + gvee_pwrdn = <8>; + vneg_pwrdn = <10>; + gpio_pmic_pwrgood = <&gpio2 13 0>; + gpio_pmic_vcom_ctrl = <&gpio2 3 0>; + gpio_pmic_wakeup = <&gpio2 14 0>; + gpio_pmic_v3p3 = <&gpio2 7 0>; + gpio_pmic_intr = <&gpio2 12 0>; + + regulators { + DISPLAY_reg: DISPLAY { + regulator-name = "DISPLAY"; + }; + + GVDD_reg: GVDD { + /* 20v */ + regulator-name = "GVDD"; + }; + + GVEE_reg: GVEE { + /* -22v */ + regulator-name = "GVEE"; + }; + + HVINN_reg: HVINN { + /* -22v */ + regulator-name = "HVINN"; + }; + + HVINP_reg: HVINP { + /* 20v */ + regulator-name = "HVINP"; + }; + + VCOM_reg: VCOM { + regulator-name = "VCOM"; + /* 2's-compliment, -4325000 */ + regulator-min-microvolt = <0xffbe0178>; + /* 2's-compliment, -500000 */ + regulator-max-microvolt = <0xfff85ee0>; + }; + + VNEG_reg: VNEG { + /* -15v */ + regulator-name = "VNEG"; + }; + + VPOS_reg: VPOS { + /* 15v */ + regulator-name = "VPOS"; + }; + + V3P3_reg: V3P3 { + regulator-name = "V3P3"; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>; + DCVDD-supply = <&vgen3_reg>; + DBVDD-supply = <®_aud3v>; + AVDD-supply = <&vgen3_reg>; + CPVDD-supply = <&vgen3_reg>; + MICVDD-supply = <®_aud3v>; + PLLVDD-supply = <&vgen3_reg>; + SPKVDD1-supply = <®_aud4v>; + SPKVDD2-supply = <®_aud4v>; + amic-mono; + }; +}; + +&gpc { + fsl,ldo-bypass = <1>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 + MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059 + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059 + /* + * Must set the LVE of pad SD2_RESET, otherwise current + * leakage through eMMC chip will pull high the VCCQ to + * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch. + */ + MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x417059 + MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 /* SD3 CD */ + MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 /*SD3 RESET */ + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 + MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */ + /* CHG_FLT, CHG_UOK/DOK, CHG_STATUS */ + MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000 + MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000 + MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000 + >; + }; + + pinctrl_audmux3: audmux3grp { + fsl,pins = < + MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 + MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 + MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 + MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 + MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + >; + }; + + pinctrl_csi1: csi1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x1b088 + MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x1b088 + MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x1b088 + MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x1b088 + MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x1b088 + MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x1b088 + MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x1b088 + MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x1b088 + MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x1b088 + MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x1b088 + MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x1b088 + MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x1b088 + MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x80000000 + MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x80000000 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79 + MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79 + MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79 + MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79 + MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79 + MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79 + MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79 + MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79 + MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79 + MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79 + MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79 + MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79 + MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x79 + >; + }; + + pinctrl_max17135: max17135grp-1 { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x80000000 /* pwrgood */ + MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000 /* vcom_ctrl */ + MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x80000000 /* wakeup */ + MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x80000000 /* v3p3 */ + MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x80000000 /* pwr int */ + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x4130b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1 + MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1 + >; + }; + + pinctrl_pwm1: pmw1grp { + fsl,pins = < + MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + lcd-supply = <®_lcd>; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pxp { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-05 10:25 ` Fabio Estevam -1 siblings, 0 replies; 60+ messages in thread From: Fabio Estevam @ 2016-12-05 10:25 UTC (permalink / raw) To: Bai Ping Cc: Mark Rutland, devicetree, Philipp Zabel, Michael Turquette, Daniel Lezcano, Stephen Boyd, linux-clk, linux-gpio, robh+dt, Sascha Hauer, Fabio Estevam, Thomas Gleixner, Shawn Guo, Linus Walleij, linux-arm-kernel On Fri, Dec 2, 2016 at 4:39 AM, Bai Ping <ping.bai@nxp.com> wrote: > Add basic dts support for imx6sll EVK baoard. s/baord/board > + battery: max8903@0 { > + compatible = "fsl,max8903-charger"; > + pinctrl-names = "default"; > + dok_input = <&gpio4 13 1>; > + uok_input = <&gpio4 13 1>; > + chg_input = <&gpio4 15 1>; > + flt_input = <&gpio4 14 1>; > + fsl,dcm_always_high; > + fsl,dc_valid; > + fsl,adc_disable; These properties do not exist in mainline, please remove them. > + status = "okay"; > + }; > + > + pxp_v4l2_out { > + compatible = "fsl,imx6sl-pxp-v4l2"; > + status = "okay"; > + }; We don't have pxp support in mainline kernel, please remove it. > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; Please remove it and place the regulator nodes directly as below: > + > + reg_usb_otg1_vbus: regulator@0 { > + compatible = "regulator-fixed"; > + reg = <0>; > + regulator-name = "usb_otg1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; reg_usb_otg1_vbus: regulator-usb-otg1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; enable-active-high; }; > +&cpu0 { > + arm-supply = <&sw1a_reg>; > + soc-supply = <&sw1c_reg>; > +}; This is only for LDO bypass mode, right? We don't support LDO-bypass in mainline. > +&gpc { > + fsl,ldo-bypass = <1>; We don't support ldo-bypass in mainline, please remove it. > +&pxp { > + status = "okay"; > +}; We don't support PXP in mainline, please remove it. ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support @ 2016-12-05 10:25 ` Fabio Estevam 0 siblings, 0 replies; 60+ messages in thread From: Fabio Estevam @ 2016-12-05 10:25 UTC (permalink / raw) To: linux-arm-kernel On Fri, Dec 2, 2016 at 4:39 AM, Bai Ping <ping.bai@nxp.com> wrote: > Add basic dts support for imx6sll EVK baoard. s/baord/board > + battery: max8903 at 0 { > + compatible = "fsl,max8903-charger"; > + pinctrl-names = "default"; > + dok_input = <&gpio4 13 1>; > + uok_input = <&gpio4 13 1>; > + chg_input = <&gpio4 15 1>; > + flt_input = <&gpio4 14 1>; > + fsl,dcm_always_high; > + fsl,dc_valid; > + fsl,adc_disable; These properties do not exist in mainline, please remove them. > + status = "okay"; > + }; > + > + pxp_v4l2_out { > + compatible = "fsl,imx6sl-pxp-v4l2"; > + status = "okay"; > + }; We don't have pxp support in mainline kernel, please remove it. > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; Please remove it and place the regulator nodes directly as below: > + > + reg_usb_otg1_vbus: regulator at 0 { > + compatible = "regulator-fixed"; > + reg = <0>; > + regulator-name = "usb_otg1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; reg_usb_otg1_vbus: regulator-usb-otg1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; enable-active-high; }; > +&cpu0 { > + arm-supply = <&sw1a_reg>; > + soc-supply = <&sw1c_reg>; > +}; This is only for LDO bypass mode, right? We don't support LDO-bypass in mainline. > +&gpc { > + fsl,ldo-bypass = <1>; We don't support ldo-bypass in mainline, please remove it. > +&pxp { > + status = "okay"; > +}; We don't support PXP in mainline, please remove it. ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support @ 2016-12-05 10:25 ` Fabio Estevam 0 siblings, 0 replies; 60+ messages in thread From: Fabio Estevam @ 2016-12-05 10:25 UTC (permalink / raw) To: Bai Ping Cc: Shawn Guo, Michael Turquette, Stephen Boyd, robh+dt, Mark Rutland, Linus Walleij, devicetree, Sascha Hauer, Daniel Lezcano, linux-gpio, Philipp Zabel, Fabio Estevam, Thomas Gleixner, linux-clk, linux-arm-kernel On Fri, Dec 2, 2016 at 4:39 AM, Bai Ping <ping.bai@nxp.com> wrote: > Add basic dts support for imx6sll EVK baoard. s/baord/board > + battery: max8903@0 { > + compatible = "fsl,max8903-charger"; > + pinctrl-names = "default"; > + dok_input = <&gpio4 13 1>; > + uok_input = <&gpio4 13 1>; > + chg_input = <&gpio4 15 1>; > + flt_input = <&gpio4 14 1>; > + fsl,dcm_always_high; > + fsl,dc_valid; > + fsl,adc_disable; These properties do not exist in mainline, please remove them. > + status = "okay"; > + }; > + > + pxp_v4l2_out { > + compatible = "fsl,imx6sl-pxp-v4l2"; > + status = "okay"; > + }; We don't have pxp support in mainline kernel, please remove it. > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; Please remove it and place the regulator nodes directly as below: > + > + reg_usb_otg1_vbus: regulator@0 { > + compatible = "regulator-fixed"; > + reg = <0>; > + regulator-name = "usb_otg1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; reg_usb_otg1_vbus: regulator-usb-otg1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; enable-active-high; }; > +&cpu0 { > + arm-supply = <&sw1a_reg>; > + soc-supply = <&sw1c_reg>; > +}; This is only for LDO bypass mode, right? We don't support LDO-bypass in mainline. > +&gpc { > + fsl,ldo-bypass = <1>; We don't support ldo-bypass in mainline, please remove it. > +&pxp { > + status = "okay"; > +}; We don't support PXP in mainline, please remove it. ^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support 2016-12-05 10:25 ` Fabio Estevam (?) @ 2016-12-06 8:39 ` Jacky Bai -1 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-06 8:39 UTC (permalink / raw) To: Fabio Estevam Cc: Mark Rutland, devicetree, Philipp Zabel, Michael Turquette, Daniel Lezcano, Stephen Boyd, linux-clk, linux-gpio, robh+dt, Sascha Hauer, Fabio Estevam, Thomas Gleixner, Shawn Guo, Linus Walleij, linux-arm-kernel Hi Fabio, Please see below. > Subject: Re: [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support > > On Fri, Dec 2, 2016 at 4:39 AM, Bai Ping <ping.bai@nxp.com> wrote: > > Add basic dts support for imx6sll EVK baoard. > > s/baord/board ok, I will fix this typo. > > > + battery: max8903@0 { > > + compatible = "fsl,max8903-charger"; > > + pinctrl-names = "default"; > > + dok_input = <&gpio4 13 1>; > > + uok_input = <&gpio4 13 1>; > > + chg_input = <&gpio4 15 1>; > > + flt_input = <&gpio4 14 1>; > > + fsl,dcm_always_high; > > + fsl,dc_valid; > > + fsl,adc_disable; > > These properties do not exist in mainline, please remove them. ok, thanks for you comment. > > > > + status = "okay"; > > + }; > > + > > + pxp_v4l2_out { > > + compatible = "fsl,imx6sl-pxp-v4l2"; > > + status = "okay"; > > + }; > > We don't have pxp support in mainline kernel, please remove it. Ok, I will remove it. > > > + > > + regulators { > > + compatible = "simple-bus"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > > Please remove it and place the regulator nodes directly as below: ok, I will fix it. > > > > + > > + reg_usb_otg1_vbus: regulator@0 { > > + compatible = "regulator-fixed"; > > + reg = <0>; > > + regulator-name = "usb_otg1_vbus"; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > > + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + }; > > reg_usb_otg1_vbus: regulator-usb-otg1-vbus { > compatible = "regulator-fixed"; > regulator-name = "usb_otg1_vbus"; > regulator-min-microvolt = <5000000>; > regulator-max-microvolt = <5000000>; > gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; > enable-active-high; > }; > > > +&cpu0 { > > + arm-supply = <&sw1a_reg>; > > + soc-supply = <&sw1c_reg>; > > +}; > > This is only for LDO bypass mode, right? We don't support LDO-bypass in > mainline. > On i.MX6SLL, no internal LDO for ARM and SOC. We can only use external regulator for DVFS. > > +&gpc { > > + fsl,ldo-bypass = <1>; > > We don't support ldo-bypass in mainline, please remove it. > > > +&pxp { > > + status = "okay"; > > +}; > > We don't support PXP in mainline, please remove it. ok I will remove it. BR Jacky Bai ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support @ 2016-12-06 8:39 ` Jacky Bai 0 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-06 8:39 UTC (permalink / raw) To: linux-arm-kernel Hi Fabio, Please see below. > Subject: Re: [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support > > On Fri, Dec 2, 2016 at 4:39 AM, Bai Ping <ping.bai@nxp.com> wrote: > > Add basic dts support for imx6sll EVK baoard. > > s/baord/board ok, I will fix this typo. > > > + battery: max8903 at 0 { > > + compatible = "fsl,max8903-charger"; > > + pinctrl-names = "default"; > > + dok_input = <&gpio4 13 1>; > > + uok_input = <&gpio4 13 1>; > > + chg_input = <&gpio4 15 1>; > > + flt_input = <&gpio4 14 1>; > > + fsl,dcm_always_high; > > + fsl,dc_valid; > > + fsl,adc_disable; > > These properties do not exist in mainline, please remove them. ok, thanks for you comment. > > > > + status = "okay"; > > + }; > > + > > + pxp_v4l2_out { > > + compatible = "fsl,imx6sl-pxp-v4l2"; > > + status = "okay"; > > + }; > > We don't have pxp support in mainline kernel, please remove it. Ok, I will remove it. > > > + > > + regulators { > > + compatible = "simple-bus"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > > Please remove it and place the regulator nodes directly as below: ok, I will fix it. > > > > + > > + reg_usb_otg1_vbus: regulator at 0 { > > + compatible = "regulator-fixed"; > > + reg = <0>; > > + regulator-name = "usb_otg1_vbus"; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > > + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + }; > > reg_usb_otg1_vbus: regulator-usb-otg1-vbus { > compatible = "regulator-fixed"; > regulator-name = "usb_otg1_vbus"; > regulator-min-microvolt = <5000000>; > regulator-max-microvolt = <5000000>; > gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; > enable-active-high; > }; > > > +&cpu0 { > > + arm-supply = <&sw1a_reg>; > > + soc-supply = <&sw1c_reg>; > > +}; > > This is only for LDO bypass mode, right? We don't support LDO-bypass in > mainline. > On i.MX6SLL, no internal LDO for ARM and SOC. We can only use external regulator for DVFS. > > +&gpc { > > + fsl,ldo-bypass = <1>; > > We don't support ldo-bypass in mainline, please remove it. > > > +&pxp { > > + status = "okay"; > > +}; > > We don't support PXP in mainline, please remove it. ok I will remove it. BR Jacky Bai ^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support @ 2016-12-06 8:39 ` Jacky Bai 0 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-06 8:39 UTC (permalink / raw) To: Fabio Estevam Cc: Shawn Guo, Michael Turquette, Stephen Boyd, robh+dt, Mark Rutland, Linus Walleij, devicetree, Sascha Hauer, Daniel Lezcano, linux-gpio, Philipp Zabel, Fabio Estevam, Thomas Gleixner, linux-clk, linux-arm-kernel SGkgRmFiaW8sDQoNClBsZWFzZSBzZWUgYmVsb3cuDQoNCj4gU3ViamVjdDogUmU6IFtQQVRDSCAw Ni8xMV0gQVJNOiBkdHM6IGlteDogQWRkIGlteDZzbGwgRVZLIGJvYXJkIGR0cyBzdXBwb3J0DQo+ IA0KPiBPbiBGcmksIERlYyAyLCAyMDE2IGF0IDQ6MzkgQU0sIEJhaSBQaW5nIDxwaW5nLmJhaUBu eHAuY29tPiB3cm90ZToNCj4gPiBBZGQgYmFzaWMgZHRzIHN1cHBvcnQgZm9yIGlteDZzbGwgRVZL IGJhb2FyZC4NCj4gDQo+IHMvYmFvcmQvYm9hcmQNCg0Kb2ssIEkgd2lsbCBmaXggdGhpcyB0eXBv Lg0KDQo+IA0KPiA+ICsgICAgICAgYmF0dGVyeTogbWF4ODkwM0AwIHsNCj4gPiArICAgICAgICAg ICAgICAgY29tcGF0aWJsZSA9ICJmc2wsbWF4ODkwMy1jaGFyZ2VyIjsNCj4gPiArICAgICAgICAg ICAgICAgcGluY3RybC1uYW1lcyA9ICJkZWZhdWx0IjsNCj4gPiArICAgICAgICAgICAgICAgZG9r X2lucHV0ID0gPCZncGlvNCAxMyAxPjsNCj4gPiArICAgICAgICAgICAgICAgdW9rX2lucHV0ID0g PCZncGlvNCAxMyAxPjsNCj4gPiArICAgICAgICAgICAgICAgY2hnX2lucHV0ID0gPCZncGlvNCAx NSAxPjsNCj4gPiArICAgICAgICAgICAgICAgZmx0X2lucHV0ID0gPCZncGlvNCAxNCAxPjsNCj4g PiArICAgICAgICAgICAgICAgZnNsLGRjbV9hbHdheXNfaGlnaDsNCj4gPiArICAgICAgICAgICAg ICAgZnNsLGRjX3ZhbGlkOw0KPiA+ICsgICAgICAgICAgICAgICBmc2wsYWRjX2Rpc2FibGU7DQo+ IA0KPiBUaGVzZSBwcm9wZXJ0aWVzIGRvIG5vdCBleGlzdCBpbiBtYWlubGluZSwgcGxlYXNlIHJl bW92ZSB0aGVtLg0KDQpvaywgdGhhbmtzIGZvciB5b3UgY29tbWVudC4NCj4gDQo+IA0KPiA+ICsg ICAgICAgICAgICAgICBzdGF0dXMgPSAib2theSI7DQo+ID4gKyAgICAgICB9Ow0KPiA+ICsNCj4g PiArICAgICAgIHB4cF92NGwyX291dCB7DQo+ID4gKyAgICAgICAgICAgICAgIGNvbXBhdGlibGUg PSAiZnNsLGlteDZzbC1weHAtdjRsMiI7DQo+ID4gKyAgICAgICAgICAgICAgIHN0YXR1cyA9ICJv a2F5IjsNCj4gPiArICAgICAgIH07DQo+IA0KPiBXZSBkb24ndCBoYXZlIHB4cCBzdXBwb3J0IGlu IG1haW5saW5lIGtlcm5lbCwgcGxlYXNlIHJlbW92ZSBpdC4NCg0KT2ssIEkgd2lsbCByZW1vdmUg aXQuDQoNCj4gDQo+ID4gKw0KPiA+ICsgICAgICAgcmVndWxhdG9ycyB7DQo+ID4gKyAgICAgICAg ICAgICAgIGNvbXBhdGlibGUgPSAic2ltcGxlLWJ1cyI7DQo+ID4gKyAgICAgICAgICAgICAgICNh ZGRyZXNzLWNlbGxzID0gPDE+Ow0KPiA+ICsgICAgICAgICAgICAgICAjc2l6ZS1jZWxscyA9IDww PjsNCj4gDQo+IA0KPiBQbGVhc2UgcmVtb3ZlIGl0IGFuZCBwbGFjZSB0aGUgcmVndWxhdG9yIG5v ZGVzIGRpcmVjdGx5IGFzIGJlbG93Og0KDQpvaywgSSB3aWxsIGZpeCBpdC4NCg0KPiANCj4gDQo+ ID4gKw0KPiA+ICsgICAgICAgICAgICAgICByZWdfdXNiX290ZzFfdmJ1czogcmVndWxhdG9yQDAg ew0KPiA+ICsgICAgICAgICAgICAgICAgICAgICAgIGNvbXBhdGlibGUgPSAicmVndWxhdG9yLWZp eGVkIjsNCj4gPiArICAgICAgICAgICAgICAgICAgICAgICByZWcgPSA8MD47DQo+ID4gKyAgICAg ICAgICAgICAgICAgICAgICAgcmVndWxhdG9yLW5hbWUgPSAidXNiX290ZzFfdmJ1cyI7DQo+ID4g KyAgICAgICAgICAgICAgICAgICAgICAgcmVndWxhdG9yLW1pbi1taWNyb3ZvbHQgPSA8NTAwMDAw MD47DQo+ID4gKyAgICAgICAgICAgICAgICAgICAgICAgcmVndWxhdG9yLW1heC1taWNyb3ZvbHQg PSA8NTAwMDAwMD47DQo+ID4gKyAgICAgICAgICAgICAgICAgICAgICAgZ3BpbyA9IDwmZ3BpbzQg MCBHUElPX0FDVElWRV9ISUdIPjsNCj4gPiArICAgICAgICAgICAgICAgICAgICAgICBlbmFibGUt YWN0aXZlLWhpZ2g7DQo+ID4gKyAgICAgICAgICAgICAgIH07DQo+IA0KPiAgICAgcmVnX3VzYl9v dGcxX3ZidXM6IHJlZ3VsYXRvci11c2Itb3RnMS12YnVzIHsNCj4gICAgICAgICAgIGNvbXBhdGli bGUgPSAicmVndWxhdG9yLWZpeGVkIjsNCj4gICAgICAgICAgIHJlZ3VsYXRvci1uYW1lID0gInVz Yl9vdGcxX3ZidXMiOw0KPiAgICAgICAgICAgcmVndWxhdG9yLW1pbi1taWNyb3ZvbHQgPSA8NTAw MDAwMD47DQo+ICAgICAgICAgICByZWd1bGF0b3ItbWF4LW1pY3Jvdm9sdCA9IDw1MDAwMDAwPjsN Cj4gICAgICAgICAgIGdwaW8gPSA8JmdwaW80IDAgR1BJT19BQ1RJVkVfSElHSD47DQo+ICAgICAg ICAgICBlbmFibGUtYWN0aXZlLWhpZ2g7DQo+ICAgICB9Ow0KPiANCj4gPiArJmNwdTAgew0KPiA+ ICsgICAgICAgYXJtLXN1cHBseSA9IDwmc3cxYV9yZWc+Ow0KPiA+ICsgICAgICAgc29jLXN1cHBs eSA9IDwmc3cxY19yZWc+Ow0KPiA+ICt9Ow0KPiANCj4gVGhpcyBpcyBvbmx5IGZvciBMRE8gYnlw YXNzIG1vZGUsIHJpZ2h0PyBXZSBkb24ndCBzdXBwb3J0IExETy1ieXBhc3MgaW4NCj4gbWFpbmxp bmUuDQo+IA0KDQpPbiBpLk1YNlNMTCwgbm8gaW50ZXJuYWwgTERPIGZvciBBUk0gYW5kIFNPQy4g IFdlIGNhbiBvbmx5IHVzZSBleHRlcm5hbCByZWd1bGF0b3IgZm9yIERWRlMuDQoNCj4gPiArJmdw YyB7DQo+ID4gKyAgICAgICBmc2wsbGRvLWJ5cGFzcyA9IDwxPjsNCj4gDQo+IFdlIGRvbid0IHN1 cHBvcnQgbGRvLWJ5cGFzcyBpbiBtYWlubGluZSwgcGxlYXNlIHJlbW92ZSBpdC4NCj4gDQo+ID4g KyZweHAgew0KPiA+ICsgICAgICAgc3RhdHVzID0gIm9rYXkiOw0KPiA+ICt9Ow0KPiANCj4gV2Ug ZG9uJ3Qgc3VwcG9ydCBQWFAgaW4gbWFpbmxpbmUsIHBsZWFzZSByZW1vdmUgaXQuDQoNCm9rIEkg d2lsbCByZW1vdmUgaXQuDQoNCkJSDQpKYWNreSBCYWkNCg== ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 07/11] ARM: debug: Add low level debug support for imx6sll 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-02 6:39 ` Bai Ping -1 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Add low level debug support for i.MX6SLL. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/Kconfig.debug | 9 +++++++++ arch/arm/include/debug/imx-uart.h | 10 ++++++++++ 2 files changed, 19 insertions(+) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 408540f..d52d48c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -405,6 +405,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6SL. + config DEBUG_IMX6SLL_UART + bool "i.MX6SLL Debug UART" + depends on SOC_IMX6SLL + help + Say Y here if you want kernel low-level debugging support + on i.MX6SLL. + config DEBUG_IMX6SX_UART bool "i.MX6SX Debug UART" depends on SOC_IMX6SX @@ -1374,6 +1381,7 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SLL_UART || \ DEBUG_IMX6SX_UART || \ DEBUG_IMX6UL_UART || \ DEBUG_IMX7D_UART @@ -1428,6 +1436,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SLL_UART || \ DEBUG_IMX6SX_UART || \ DEBUG_IMX6UL_UART || \ DEBUG_IMX7D_UART diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index bce58e9..24e60ce 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -81,6 +81,14 @@ #define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR #define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n) +#define IMX6SLL_UART1_BASE_ADDR 0x02020000 +#define IMX6SLL_UART2_BASE_ADDR 0x02024000 +#define IMX6SLL_UART3_BASE_ADDR 0x02034000 +#define IMX6SLL_UART4_BASE_ADDR 0x02018000 +#define IMX6SLL_UART5_BASE_ADDR 0x021f4000 +#define IMX6SLL_UART_BASE_ADDR(n) IMX6SLL_UART##n##_BASE_ADDR +#define IMX6SLL_UART_BASE(n) IMX6SLL_UART_BASE_ADDR(n) + #define IMX6SX_UART1_BASE_ADDR 0x02020000 #define IMX6SX_UART2_BASE_ADDR 0x021e8000 #define IMX6SX_UART3_BASE_ADDR 0x021ec000 @@ -133,6 +141,8 @@ #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q) #elif defined(CONFIG_DEBUG_IMX6SL_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL) +#elif defined(CONFIG_DEBUG_IMX6SLL_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SLL) #elif defined(CONFIG_DEBUG_IMX6SX_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX) #elif defined(CONFIG_DEBUG_IMX6UL_UART) -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 07/11] ARM: debug: Add low level debug support for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: linux-arm-kernel Add low level debug support for i.MX6SLL. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/Kconfig.debug | 9 +++++++++ arch/arm/include/debug/imx-uart.h | 10 ++++++++++ 2 files changed, 19 insertions(+) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 408540f..d52d48c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -405,6 +405,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6SL. + config DEBUG_IMX6SLL_UART + bool "i.MX6SLL Debug UART" + depends on SOC_IMX6SLL + help + Say Y here if you want kernel low-level debugging support + on i.MX6SLL. + config DEBUG_IMX6SX_UART bool "i.MX6SX Debug UART" depends on SOC_IMX6SX @@ -1374,6 +1381,7 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SLL_UART || \ DEBUG_IMX6SX_UART || \ DEBUG_IMX6UL_UART || \ DEBUG_IMX7D_UART @@ -1428,6 +1436,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SLL_UART || \ DEBUG_IMX6SX_UART || \ DEBUG_IMX6UL_UART || \ DEBUG_IMX7D_UART diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index bce58e9..24e60ce 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -81,6 +81,14 @@ #define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR #define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n) +#define IMX6SLL_UART1_BASE_ADDR 0x02020000 +#define IMX6SLL_UART2_BASE_ADDR 0x02024000 +#define IMX6SLL_UART3_BASE_ADDR 0x02034000 +#define IMX6SLL_UART4_BASE_ADDR 0x02018000 +#define IMX6SLL_UART5_BASE_ADDR 0x021f4000 +#define IMX6SLL_UART_BASE_ADDR(n) IMX6SLL_UART##n##_BASE_ADDR +#define IMX6SLL_UART_BASE(n) IMX6SLL_UART_BASE_ADDR(n) + #define IMX6SX_UART1_BASE_ADDR 0x02020000 #define IMX6SX_UART2_BASE_ADDR 0x021e8000 #define IMX6SX_UART3_BASE_ADDR 0x021ec000 @@ -133,6 +141,8 @@ #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q) #elif defined(CONFIG_DEBUG_IMX6SL_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL) +#elif defined(CONFIG_DEBUG_IMX6SLL_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SLL) #elif defined(CONFIG_DEBUG_IMX6SX_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX) #elif defined(CONFIG_DEBUG_IMX6UL_UART) -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 07/11] ARM: debug: Add low level debug support for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Add low level debug support for i.MX6SLL. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/Kconfig.debug | 9 +++++++++ arch/arm/include/debug/imx-uart.h | 10 ++++++++++ 2 files changed, 19 insertions(+) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 408540f..d52d48c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -405,6 +405,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6SL. + config DEBUG_IMX6SLL_UART + bool "i.MX6SLL Debug UART" + depends on SOC_IMX6SLL + help + Say Y here if you want kernel low-level debugging support + on i.MX6SLL. + config DEBUG_IMX6SX_UART bool "i.MX6SX Debug UART" depends on SOC_IMX6SX @@ -1374,6 +1381,7 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SLL_UART || \ DEBUG_IMX6SX_UART || \ DEBUG_IMX6UL_UART || \ DEBUG_IMX7D_UART @@ -1428,6 +1436,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SLL_UART || \ DEBUG_IMX6SX_UART || \ DEBUG_IMX6UL_UART || \ DEBUG_IMX7D_UART diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index bce58e9..24e60ce 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -81,6 +81,14 @@ #define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR #define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n) +#define IMX6SLL_UART1_BASE_ADDR 0x02020000 +#define IMX6SLL_UART2_BASE_ADDR 0x02024000 +#define IMX6SLL_UART3_BASE_ADDR 0x02034000 +#define IMX6SLL_UART4_BASE_ADDR 0x02018000 +#define IMX6SLL_UART5_BASE_ADDR 0x021f4000 +#define IMX6SLL_UART_BASE_ADDR(n) IMX6SLL_UART##n##_BASE_ADDR +#define IMX6SLL_UART_BASE(n) IMX6SLL_UART_BASE_ADDR(n) + #define IMX6SX_UART1_BASE_ADDR 0x02020000 #define IMX6SX_UART2_BASE_ADDR 0x021e8000 #define IMX6SX_UART3_BASE_ADDR 0x021ec000 @@ -133,6 +141,8 @@ #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q) #elif defined(CONFIG_DEBUG_IMX6SL_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL) +#elif defined(CONFIG_DEBUG_IMX6SLL_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SLL) #elif defined(CONFIG_DEBUG_IMX6SX_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX) #elif defined(CONFIG_DEBUG_IMX6UL_UART) -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 08/11] ARM: imx: Add suspend/resume support for imx6sll 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-02 6:39 ` Bai Ping -1 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: devicetree, kernel, daniel.lezcano, linux-gpio, p.zabel, fabio.estevam, tglx, linux-clk, linux-arm-kernel, ping.bai Add suspend/resume support for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/pm-imx6.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 1515e49..2ed4316 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -145,6 +145,13 @@ struct imx6_pm_socdata { 0x494, 0x4b0, /* MODE_CTL, MODE, */ }; +static const u32 imx6sll_mmdc_io_offset[] __initconst = { + 0x294, 0x298, 0x29c, 0x2a0, /* DQM0 ~ DQM3 */ + 0x544, 0x54c, 0x554, 0x558, /* GPR_B0DS ~ GPR_B3DS */ + 0x530, 0x540, 0x2ac, 0x52c, /* MODE_CTL, MODE, SDCLK_0, GPR_ADDDS */ + 0x2a4, 0x2a8, /* SDCKE0, SDCKE1*/ +}; + static const struct imx6_pm_socdata imx6q_pm_data __initconst = { .mmdc_compat = "fsl,imx6q-mmdc", .src_compat = "fsl,imx6q-src", @@ -195,6 +202,15 @@ struct imx6_pm_socdata { .mmdc_io_offset = imx6ul_mmdc_io_offset, }; +static const struct imx6_pm_socdata imx6sll_pm_data __initconst = { + .mmdc_compat = "fsl,imx6sll-mmdc", + .src_compat = "fsl,imx6sll-src", + .iomuxc_compat = "fsl,imx6sll-iomuxc", + .gpc_compat = "fsl,imx6sll-gpc", + .pl310_compat = "arm,pl310-cache", + .mmdc_io_num = ARRAY_SIZE(imx6sll_mmdc_io_offset), + .mmdc_io_offset = imx6sll_mmdc_io_offset, +}; /* * This structure is for passing necessary data for low level ocram * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct @@ -293,9 +309,10 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) val |= 0x2 << BP_CLPCR_LPM; val &= ~BM_CLPCR_VSTBY; val &= ~BM_CLPCR_SBYOS; - if (cpu_is_imx6sl()) + if (cpu_is_imx6sl() || cpu_is_imx6sll()) val |= BM_CLPCR_BYPASS_PMIC_READY; - if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || + cpu_is_imx6sll()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -310,9 +327,10 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) val |= 0x3 << BP_CLPCR_STBY_COUNT; val |= BM_CLPCR_VSTBY; val |= BM_CLPCR_SBYOS; - if (cpu_is_imx6sl() || cpu_is_imx6sx()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6sll()) val |= BM_CLPCR_BYPASS_PMIC_READY; - if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || + cpu_is_imx6ul() || cpu_is_imx6sll()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -373,6 +391,7 @@ static int imx6q_pm_enter(suspend_state_t state) imx6sl_set_wait_clk(true); /* Zzz ... */ cpu_do_idle(); + if (cpu_is_imx6sl()) imx6sl_set_wait_clk(false); imx_gpc_post_resume(); @@ -632,7 +651,10 @@ void __init imx6dl_pm_init(void) void __init imx6sl_pm_init(void) { - imx6_pm_common_init(&imx6sl_pm_data); + if (cpu_is_imx6sl()) + imx6_pm_common_init(&imx6sl_pm_data); + else + imx6_pm_common_init(&imx6sll_pm_data); } void __init imx6sx_pm_init(void) -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 08/11] ARM: imx: Add suspend/resume support for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: linux-arm-kernel Add suspend/resume support for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/pm-imx6.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 1515e49..2ed4316 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -145,6 +145,13 @@ struct imx6_pm_socdata { 0x494, 0x4b0, /* MODE_CTL, MODE, */ }; +static const u32 imx6sll_mmdc_io_offset[] __initconst = { + 0x294, 0x298, 0x29c, 0x2a0, /* DQM0 ~ DQM3 */ + 0x544, 0x54c, 0x554, 0x558, /* GPR_B0DS ~ GPR_B3DS */ + 0x530, 0x540, 0x2ac, 0x52c, /* MODE_CTL, MODE, SDCLK_0, GPR_ADDDS */ + 0x2a4, 0x2a8, /* SDCKE0, SDCKE1*/ +}; + static const struct imx6_pm_socdata imx6q_pm_data __initconst = { .mmdc_compat = "fsl,imx6q-mmdc", .src_compat = "fsl,imx6q-src", @@ -195,6 +202,15 @@ struct imx6_pm_socdata { .mmdc_io_offset = imx6ul_mmdc_io_offset, }; +static const struct imx6_pm_socdata imx6sll_pm_data __initconst = { + .mmdc_compat = "fsl,imx6sll-mmdc", + .src_compat = "fsl,imx6sll-src", + .iomuxc_compat = "fsl,imx6sll-iomuxc", + .gpc_compat = "fsl,imx6sll-gpc", + .pl310_compat = "arm,pl310-cache", + .mmdc_io_num = ARRAY_SIZE(imx6sll_mmdc_io_offset), + .mmdc_io_offset = imx6sll_mmdc_io_offset, +}; /* * This structure is for passing necessary data for low level ocram * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct @@ -293,9 +309,10 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) val |= 0x2 << BP_CLPCR_LPM; val &= ~BM_CLPCR_VSTBY; val &= ~BM_CLPCR_SBYOS; - if (cpu_is_imx6sl()) + if (cpu_is_imx6sl() || cpu_is_imx6sll()) val |= BM_CLPCR_BYPASS_PMIC_READY; - if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || + cpu_is_imx6sll()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -310,9 +327,10 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) val |= 0x3 << BP_CLPCR_STBY_COUNT; val |= BM_CLPCR_VSTBY; val |= BM_CLPCR_SBYOS; - if (cpu_is_imx6sl() || cpu_is_imx6sx()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6sll()) val |= BM_CLPCR_BYPASS_PMIC_READY; - if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || + cpu_is_imx6ul() || cpu_is_imx6sll()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -373,6 +391,7 @@ static int imx6q_pm_enter(suspend_state_t state) imx6sl_set_wait_clk(true); /* Zzz ... */ cpu_do_idle(); + if (cpu_is_imx6sl()) imx6sl_set_wait_clk(false); imx_gpc_post_resume(); @@ -632,7 +651,10 @@ void __init imx6dl_pm_init(void) void __init imx6sl_pm_init(void) { - imx6_pm_common_init(&imx6sl_pm_data); + if (cpu_is_imx6sl()) + imx6_pm_common_init(&imx6sl_pm_data); + else + imx6_pm_common_init(&imx6sll_pm_data); } void __init imx6sx_pm_init(void) -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 08/11] ARM: imx: Add suspend/resume support for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Add suspend/resume support for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/pm-imx6.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 1515e49..2ed4316 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -145,6 +145,13 @@ struct imx6_pm_socdata { 0x494, 0x4b0, /* MODE_CTL, MODE, */ }; +static const u32 imx6sll_mmdc_io_offset[] __initconst = { + 0x294, 0x298, 0x29c, 0x2a0, /* DQM0 ~ DQM3 */ + 0x544, 0x54c, 0x554, 0x558, /* GPR_B0DS ~ GPR_B3DS */ + 0x530, 0x540, 0x2ac, 0x52c, /* MODE_CTL, MODE, SDCLK_0, GPR_ADDDS */ + 0x2a4, 0x2a8, /* SDCKE0, SDCKE1*/ +}; + static const struct imx6_pm_socdata imx6q_pm_data __initconst = { .mmdc_compat = "fsl,imx6q-mmdc", .src_compat = "fsl,imx6q-src", @@ -195,6 +202,15 @@ struct imx6_pm_socdata { .mmdc_io_offset = imx6ul_mmdc_io_offset, }; +static const struct imx6_pm_socdata imx6sll_pm_data __initconst = { + .mmdc_compat = "fsl,imx6sll-mmdc", + .src_compat = "fsl,imx6sll-src", + .iomuxc_compat = "fsl,imx6sll-iomuxc", + .gpc_compat = "fsl,imx6sll-gpc", + .pl310_compat = "arm,pl310-cache", + .mmdc_io_num = ARRAY_SIZE(imx6sll_mmdc_io_offset), + .mmdc_io_offset = imx6sll_mmdc_io_offset, +}; /* * This structure is for passing necessary data for low level ocram * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct @@ -293,9 +309,10 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) val |= 0x2 << BP_CLPCR_LPM; val &= ~BM_CLPCR_VSTBY; val &= ~BM_CLPCR_SBYOS; - if (cpu_is_imx6sl()) + if (cpu_is_imx6sl() || cpu_is_imx6sll()) val |= BM_CLPCR_BYPASS_PMIC_READY; - if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || + cpu_is_imx6sll()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -310,9 +327,10 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) val |= 0x3 << BP_CLPCR_STBY_COUNT; val |= BM_CLPCR_VSTBY; val |= BM_CLPCR_SBYOS; - if (cpu_is_imx6sl() || cpu_is_imx6sx()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6sll()) val |= BM_CLPCR_BYPASS_PMIC_READY; - if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || + cpu_is_imx6ul() || cpu_is_imx6sll()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -373,6 +391,7 @@ static int imx6q_pm_enter(suspend_state_t state) imx6sl_set_wait_clk(true); /* Zzz ... */ cpu_do_idle(); + if (cpu_is_imx6sl()) imx6sl_set_wait_clk(false); imx_gpc_post_resume(); @@ -632,7 +651,10 @@ void __init imx6dl_pm_init(void) void __init imx6sl_pm_init(void) { - imx6_pm_common_init(&imx6sl_pm_data); + if (cpu_is_imx6sl()) + imx6_pm_common_init(&imx6sl_pm_data); + else + imx6_pm_common_init(&imx6sll_pm_data); } void __init imx6sx_pm_init(void) -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 09/11] ARM: imx: correct i.mx6sll dram io low power mode 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-02 6:39 ` Bai Ping -1 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: devicetree, kernel, daniel.lezcano, linux-gpio, p.zabel, fabio.estevam, tglx, linux-clk, linux-arm-kernel, ping.bai i.MX6SLL has different DRAM IO offset, and it has no CAS/RAS/ODT/RESET pin now, correct the DRAM IO offset. To better support all different i.MX6 SoCs and different DRAM types, introduce a new column to store the low power settings for DRAM IO, then suspend asm code no need to check SoC or DRAM type, just get the DRAM IO's low power settings from OCRAM pm_info and set to each DRAM IO. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/pm-imx6.c | 17 ++++++++++++++++- arch/arm/mach-imx/suspend-imx6.S | 29 +++++++---------------------- 2 files changed, 23 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 2ed4316..5fb78a9 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -230,7 +230,7 @@ struct imx6_cpu_pm_info { struct imx6_pm_base gpc_base; struct imx6_pm_base l2_base; u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */ - u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */ + u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][3]; /* To save offset,value and low power setting */ } __aligned(8); void imx6_set_int_mem_clk_lpm(bool enable) @@ -570,6 +570,21 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) pm_info->mmdc_io_val[i][1] = readl_relaxed(pm_info->iomuxc_base.vbase + mmdc_offset_array[i]); + pm_info->mmdc_io_val[i][2] = 0; + + } + + /* i.MX6SLL has no DRAM RESET pin */ + if (cpu_is_imx6sll()) { + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 2][2] = 0x1000; + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 1][2] = 0x1000; + } else { + if (pm_info->ddr_type == IMX_DDR_TYPE_LPDDR2) { + /* for LPDDR2, CKE0/1 and RESET pin need special setting */ + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 3][2] = 0x1000; + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 2][2] = 0x1000; + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 1][2] = 0x80000; + } } imx6_suspend_in_ocram_fn = fncpy( diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 76ee2ce..c9a26f4 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -104,7 +104,7 @@ add r7, r7, r0 1: ldr r8, [r7], #0x4 - ldr r9, [r7], #0x4 + ldr r9, [r7], #0x8 str r9, [r11, r8] subs r6, r6, #0x1 bne 1b @@ -179,7 +179,6 @@ ENTRY(imx6_suspend) ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] ldr r6, [r11, #0x0] - /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] /* store physical resume addr and pm_info address. */ str r9, [r11, #MX6Q_SRC_GPR1] @@ -207,32 +206,18 @@ poll_dvfs_set: ands r7, r7, #(1 << 25) beq poll_dvfs_set + /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] - ldr r6, =0x0 - ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] + ldr r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET add r8, r8, r0 - /* LPDDR2's last 3 IOs need special setting */ - cmp r3, #IMX_DDR_TYPE_LPDDR2 - subeq r7, r7, #0x3 set_mmdc_io_lpm: - ldr r9, [r8], #0x8 - str r6, [r11, r9] - subs r7, r7, #0x1 + ldr r7, [r8], #0x8 + ldr r9, [r8], #0x4 + str r9, [r11, r7] + subs r6, r6, #0x1 bne set_mmdc_io_lpm - cmp r3, #IMX_DDR_TYPE_LPDDR2 - bne set_mmdc_io_lpm_done - ldr r6, =0x1000 - ldr r9, [r8], #0x8 - str r6, [r11, r9] - ldr r9, [r8], #0x8 - str r6, [r11, r9] - ldr r6, =0x80000 - ldr r9, [r8] - str r6, [r11, r9] -set_mmdc_io_lpm_done: - /* * mask all GPC interrupts before * enabling the RBC counters to -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 09/11] ARM: imx: correct i.mx6sll dram io low power mode @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: linux-arm-kernel i.MX6SLL has different DRAM IO offset, and it has no CAS/RAS/ODT/RESET pin now, correct the DRAM IO offset. To better support all different i.MX6 SoCs and different DRAM types, introduce a new column to store the low power settings for DRAM IO, then suspend asm code no need to check SoC or DRAM type, just get the DRAM IO's low power settings from OCRAM pm_info and set to each DRAM IO. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/pm-imx6.c | 17 ++++++++++++++++- arch/arm/mach-imx/suspend-imx6.S | 29 +++++++---------------------- 2 files changed, 23 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 2ed4316..5fb78a9 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -230,7 +230,7 @@ struct imx6_cpu_pm_info { struct imx6_pm_base gpc_base; struct imx6_pm_base l2_base; u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */ - u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */ + u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][3]; /* To save offset,value and low power setting */ } __aligned(8); void imx6_set_int_mem_clk_lpm(bool enable) @@ -570,6 +570,21 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) pm_info->mmdc_io_val[i][1] = readl_relaxed(pm_info->iomuxc_base.vbase + mmdc_offset_array[i]); + pm_info->mmdc_io_val[i][2] = 0; + + } + + /* i.MX6SLL has no DRAM RESET pin */ + if (cpu_is_imx6sll()) { + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 2][2] = 0x1000; + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 1][2] = 0x1000; + } else { + if (pm_info->ddr_type == IMX_DDR_TYPE_LPDDR2) { + /* for LPDDR2, CKE0/1 and RESET pin need special setting */ + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 3][2] = 0x1000; + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 2][2] = 0x1000; + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 1][2] = 0x80000; + } } imx6_suspend_in_ocram_fn = fncpy( diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 76ee2ce..c9a26f4 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -104,7 +104,7 @@ add r7, r7, r0 1: ldr r8, [r7], #0x4 - ldr r9, [r7], #0x4 + ldr r9, [r7], #0x8 str r9, [r11, r8] subs r6, r6, #0x1 bne 1b @@ -179,7 +179,6 @@ ENTRY(imx6_suspend) ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] ldr r6, [r11, #0x0] - /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] /* store physical resume addr and pm_info address. */ str r9, [r11, #MX6Q_SRC_GPR1] @@ -207,32 +206,18 @@ poll_dvfs_set: ands r7, r7, #(1 << 25) beq poll_dvfs_set + /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] - ldr r6, =0x0 - ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] + ldr r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET add r8, r8, r0 - /* LPDDR2's last 3 IOs need special setting */ - cmp r3, #IMX_DDR_TYPE_LPDDR2 - subeq r7, r7, #0x3 set_mmdc_io_lpm: - ldr r9, [r8], #0x8 - str r6, [r11, r9] - subs r7, r7, #0x1 + ldr r7, [r8], #0x8 + ldr r9, [r8], #0x4 + str r9, [r11, r7] + subs r6, r6, #0x1 bne set_mmdc_io_lpm - cmp r3, #IMX_DDR_TYPE_LPDDR2 - bne set_mmdc_io_lpm_done - ldr r6, =0x1000 - ldr r9, [r8], #0x8 - str r6, [r11, r9] - ldr r9, [r8], #0x8 - str r6, [r11, r9] - ldr r6, =0x80000 - ldr r9, [r8] - str r6, [r11, r9] -set_mmdc_io_lpm_done: - /* * mask all GPC interrupts before * enabling the RBC counters to -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 09/11] ARM: imx: correct i.mx6sll dram io low power mode @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai i.MX6SLL has different DRAM IO offset, and it has no CAS/RAS/ODT/RESET pin now, correct the DRAM IO offset. To better support all different i.MX6 SoCs and different DRAM types, introduce a new column to store the low power settings for DRAM IO, then suspend asm code no need to check SoC or DRAM type, just get the DRAM IO's low power settings from OCRAM pm_info and set to each DRAM IO. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/mach-imx/pm-imx6.c | 17 ++++++++++++++++- arch/arm/mach-imx/suspend-imx6.S | 29 +++++++---------------------- 2 files changed, 23 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 2ed4316..5fb78a9 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -230,7 +230,7 @@ struct imx6_cpu_pm_info { struct imx6_pm_base gpc_base; struct imx6_pm_base l2_base; u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */ - u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */ + u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][3]; /* To save offset,value and low power setting */ } __aligned(8); void imx6_set_int_mem_clk_lpm(bool enable) @@ -570,6 +570,21 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) pm_info->mmdc_io_val[i][1] = readl_relaxed(pm_info->iomuxc_base.vbase + mmdc_offset_array[i]); + pm_info->mmdc_io_val[i][2] = 0; + + } + + /* i.MX6SLL has no DRAM RESET pin */ + if (cpu_is_imx6sll()) { + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 2][2] = 0x1000; + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 1][2] = 0x1000; + } else { + if (pm_info->ddr_type == IMX_DDR_TYPE_LPDDR2) { + /* for LPDDR2, CKE0/1 and RESET pin need special setting */ + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 3][2] = 0x1000; + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 2][2] = 0x1000; + pm_info->mmdc_io_val[pm_info->mmdc_io_num - 1][2] = 0x80000; + } } imx6_suspend_in_ocram_fn = fncpy( diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 76ee2ce..c9a26f4 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -104,7 +104,7 @@ add r7, r7, r0 1: ldr r8, [r7], #0x4 - ldr r9, [r7], #0x4 + ldr r9, [r7], #0x8 str r9, [r11, r8] subs r6, r6, #0x1 bne 1b @@ -179,7 +179,6 @@ ENTRY(imx6_suspend) ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] ldr r6, [r11, #0x0] - /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] /* store physical resume addr and pm_info address. */ str r9, [r11, #MX6Q_SRC_GPR1] @@ -207,32 +206,18 @@ poll_dvfs_set: ands r7, r7, #(1 << 25) beq poll_dvfs_set + /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] - ldr r6, =0x0 - ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] + ldr r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET add r8, r8, r0 - /* LPDDR2's last 3 IOs need special setting */ - cmp r3, #IMX_DDR_TYPE_LPDDR2 - subeq r7, r7, #0x3 set_mmdc_io_lpm: - ldr r9, [r8], #0x8 - str r6, [r11, r9] - subs r7, r7, #0x1 + ldr r7, [r8], #0x8 + ldr r9, [r8], #0x4 + str r9, [r11, r7] + subs r6, r6, #0x1 bne set_mmdc_io_lpm - cmp r3, #IMX_DDR_TYPE_LPDDR2 - bne set_mmdc_io_lpm_done - ldr r6, =0x1000 - ldr r9, [r8], #0x8 - str r6, [r11, r9] - ldr r9, [r8], #0x8 - str r6, [r11, r9] - ldr r6, =0x80000 - ldr r9, [r8] - str r6, [r11, r9] -set_mmdc_io_lpm_done: - /* * mask all GPC interrupts before * enabling the RBC counters to -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-02 6:39 ` Bai Ping -1 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: devicetree, kernel, daniel.lezcano, linux-gpio, p.zabel, fabio.estevam, tglx, linux-clk, linux-arm-kernel, ping.bai Add necessary document update for i.MX6SLL support. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ 2 files changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt new file mode 100644 index 0000000..4f52efa --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt @@ -0,0 +1,13 @@ +* Clock bindings for Freescale i.MX6 UltraLite + +Required properties: +- compatible: Should be "fsl,imx6sll-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h +for the full list of i.MX6 SLL clock IDs. diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt new file mode 100644 index 0000000..096e471 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt @@ -0,0 +1,37 @@ +* Freescale i.MX6 UltraLite IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx6sll-iomuxc" +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val + input_val> are specified using a PIN_FUNC_ID macro, which can be found in + imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX6SLL + Reference Manual for detailed CONFIG settings. + +CONFIG bits definition: +PAD_CTL_LVE (1 << 22) +PAD_CTL_HYS (1 << 16) +PAD_CTL_PUS_100K_DOWN (0 << 14) +PAD_CTL_PUS_47K_UP (1 << 14) +PAD_CTL_PUS_100K_UP (2 << 14) +PAD_CTL_PUS_22K_UP (3 << 14) +PAD_CTL_PUE (1 << 13) +PAD_CTL_PKE (1 << 12) +PAD_CTL_ODE (1 << 11) +PAD_CTL_SPEED_LOW (0 << 6) +PAD_CTL_SPEED_MED (1 << 6) +PAD_CTL_SPEED_HIGH (3 << 6) +PAD_CTL_DSE_DISABLE (0 << 3) +PAD_CTL_DSE_260ohm (1 << 3) +PAD_CTL_DSE_130ohm (2 << 3) +PAD_CTL_DSE_87ohm (3 << 3) +PAD_CTL_DSE_65ohm (4 << 3) +PAD_CTL_DSE_52ohm (5 << 3) +PAD_CTL_DSE_43ohm (6 << 3) +PAD_CTL_DSE_37ohm (7 << 3) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: linux-arm-kernel Add necessary document update for i.MX6SLL support. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ 2 files changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt new file mode 100644 index 0000000..4f52efa --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt @@ -0,0 +1,13 @@ +* Clock bindings for Freescale i.MX6 UltraLite + +Required properties: +- compatible: Should be "fsl,imx6sll-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h +for the full list of i.MX6 SLL clock IDs. diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt new file mode 100644 index 0000000..096e471 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt @@ -0,0 +1,37 @@ +* Freescale i.MX6 UltraLite IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx6sll-iomuxc" +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val + input_val> are specified using a PIN_FUNC_ID macro, which can be found in + imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX6SLL + Reference Manual for detailed CONFIG settings. + +CONFIG bits definition: +PAD_CTL_LVE (1 << 22) +PAD_CTL_HYS (1 << 16) +PAD_CTL_PUS_100K_DOWN (0 << 14) +PAD_CTL_PUS_47K_UP (1 << 14) +PAD_CTL_PUS_100K_UP (2 << 14) +PAD_CTL_PUS_22K_UP (3 << 14) +PAD_CTL_PUE (1 << 13) +PAD_CTL_PKE (1 << 12) +PAD_CTL_ODE (1 << 11) +PAD_CTL_SPEED_LOW (0 << 6) +PAD_CTL_SPEED_MED (1 << 6) +PAD_CTL_SPEED_HIGH (3 << 6) +PAD_CTL_DSE_DISABLE (0 << 3) +PAD_CTL_DSE_260ohm (1 << 3) +PAD_CTL_DSE_130ohm (2 << 3) +PAD_CTL_DSE_87ohm (3 << 3) +PAD_CTL_DSE_65ohm (4 << 3) +PAD_CTL_DSE_52ohm (5 << 3) +PAD_CTL_DSE_43ohm (6 << 3) +PAD_CTL_DSE_37ohm (7 << 3) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Add necessary document update for i.MX6SLL support. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ 2 files changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt new file mode 100644 index 0000000..4f52efa --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt @@ -0,0 +1,13 @@ +* Clock bindings for Freescale i.MX6 UltraLite + +Required properties: +- compatible: Should be "fsl,imx6sll-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h +for the full list of i.MX6 SLL clock IDs. diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt new file mode 100644 index 0000000..096e471 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt @@ -0,0 +1,37 @@ +* Freescale i.MX6 UltraLite IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx6sll-iomuxc" +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val + input_val> are specified using a PIN_FUNC_ID macro, which can be found in + imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX6SLL + Reference Manual for detailed CONFIG settings. + +CONFIG bits definition: +PAD_CTL_LVE (1 << 22) +PAD_CTL_HYS (1 << 16) +PAD_CTL_PUS_100K_DOWN (0 << 14) +PAD_CTL_PUS_47K_UP (1 << 14) +PAD_CTL_PUS_100K_UP (2 << 14) +PAD_CTL_PUS_22K_UP (3 << 14) +PAD_CTL_PUE (1 << 13) +PAD_CTL_PKE (1 << 12) +PAD_CTL_ODE (1 << 11) +PAD_CTL_SPEED_LOW (0 << 6) +PAD_CTL_SPEED_MED (1 << 6) +PAD_CTL_SPEED_HIGH (3 << 6) +PAD_CTL_DSE_DISABLE (0 << 3) +PAD_CTL_DSE_260ohm (1 << 3) +PAD_CTL_DSE_130ohm (2 << 3) +PAD_CTL_DSE_87ohm (3 << 3) +PAD_CTL_DSE_65ohm (4 << 3) +PAD_CTL_DSE_52ohm (5 << 3) +PAD_CTL_DSE_43ohm (6 << 3) +PAD_CTL_DSE_37ohm (7 << 3) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll 2016-12-02 6:39 ` Bai Ping @ 2016-12-08 22:54 ` Stephen Boyd -1 siblings, 0 replies; 60+ messages in thread From: Stephen Boyd @ 2016-12-08 22:54 UTC (permalink / raw) To: Bai Ping Cc: shawnguo, mturquette, robh+dt, mark.rutland, linus.walleij, kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel On 12/02, Bai Ping wrote: > Add necessary document update for i.MX6SLL support. > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > --- > .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ > .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ Please split the bindings into different patches and put them closer to the drivers that use them in the series. > 2 files changed, 50 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt > create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > new file mode 100644 > index 0000000..4f52efa > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > @@ -0,0 +1,13 @@ > +* Clock bindings for Freescale i.MX6 UltraLite > + > +Required properties: > +- compatible: Should be "fsl,imx6sll-ccm" > +- reg: Address and length of the register set > +- #clock-cells: Should be <1> > +- clocks: list of clock specifiers, must contain an entry for each required > + entry in clock-names > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" > + > +The clock consumer should specify the desired clock by having the clock > +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h > +for the full list of i.MX6 SLL clock IDs. Can you add an example node here? -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll @ 2016-12-08 22:54 ` Stephen Boyd 0 siblings, 0 replies; 60+ messages in thread From: Stephen Boyd @ 2016-12-08 22:54 UTC (permalink / raw) To: linux-arm-kernel On 12/02, Bai Ping wrote: > Add necessary document update for i.MX6SLL support. > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > --- > .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ > .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ Please split the bindings into different patches and put them closer to the drivers that use them in the series. > 2 files changed, 50 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt > create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > new file mode 100644 > index 0000000..4f52efa > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > @@ -0,0 +1,13 @@ > +* Clock bindings for Freescale i.MX6 UltraLite > + > +Required properties: > +- compatible: Should be "fsl,imx6sll-ccm" > +- reg: Address and length of the register set > +- #clock-cells: Should be <1> > +- clocks: list of clock specifiers, must contain an entry for each required > + entry in clock-names > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" > + > +The clock consumer should specify the desired clock by having the clock > +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h > +for the full list of i.MX6 SLL clock IDs. Can you add an example node here? -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll 2016-12-08 22:54 ` Stephen Boyd (?) @ 2016-12-12 2:32 ` Jacky Bai -1 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-12 2:32 UTC (permalink / raw) To: Stephen Boyd Cc: mark.rutland, devicetree, p.zabel, mturquette, daniel.lezcano, linux-clk, linux-gpio, robh+dt, kernel, jacky.baip, Fabio Estevam, tglx, shawnguo, linus.walleij, linux-arm-kernel > Subject: Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll > > On 12/02, Bai Ping wrote: > > Add necessary document update for i.MX6SLL support. > > > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > > --- > > .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ > > .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ > > Please split the bindings into different patches and put them closer to the > drivers that use them in the series. Ok, I will fix it in V2. > > > 2 files changed, 50 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > create mode 100644 > > Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > > > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > new file mode 100644 > > index 0000000..4f52efa > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > @@ -0,0 +1,13 @@ > > +* Clock bindings for Freescale i.MX6 UltraLite > > + > > +Required properties: > > +- compatible: Should be "fsl,imx6sll-ccm" > > +- reg: Address and length of the register set > > +- #clock-cells: Should be <1> > > +- clocks: list of clock specifiers, must contain an entry for each > > +required > > + entry in clock-names > > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" > > + > > +The clock consumer should specify the desired clock by having the > > +clock ID in its "clocks" phandle cell. See > > +include/dt-bindings/clock/imx6sll-clock.h > > +for the full list of i.MX6 SLL clock IDs. > > Can you add an example node here? > Thanks for review, I will add it in V2. > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux > Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll @ 2016-12-12 2:32 ` Jacky Bai 0 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-12 2:32 UTC (permalink / raw) To: linux-arm-kernel > Subject: Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll > > On 12/02, Bai Ping wrote: > > Add necessary document update for i.MX6SLL support. > > > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > > --- > > .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ > > .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ > > Please split the bindings into different patches and put them closer to the > drivers that use them in the series. Ok, I will fix it in V2. > > > 2 files changed, 50 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > create mode 100644 > > Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > > > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > new file mode 100644 > > index 0000000..4f52efa > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > @@ -0,0 +1,13 @@ > > +* Clock bindings for Freescale i.MX6 UltraLite > > + > > +Required properties: > > +- compatible: Should be "fsl,imx6sll-ccm" > > +- reg: Address and length of the register set > > +- #clock-cells: Should be <1> > > +- clocks: list of clock specifiers, must contain an entry for each > > +required > > + entry in clock-names > > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" > > + > > +The clock consumer should specify the desired clock by having the > > +clock ID in its "clocks" phandle cell. See > > +include/dt-bindings/clock/imx6sll-clock.h > > +for the full list of i.MX6 SLL clock IDs. > > Can you add an example node here? > Thanks for review, I will add it in V2. > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux > Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll @ 2016-12-12 2:32 ` Jacky Bai 0 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-12 2:32 UTC (permalink / raw) To: Stephen Boyd Cc: shawnguo, mturquette, robh+dt, mark.rutland, linus.walleij, kernel, Fabio Estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, jacky.baip > Subject: Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx= 6sll >=20 > On 12/02, Bai Ping wrote: > > Add necessary document update for i.MX6SLL support. > > > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > > --- > > .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ > > .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++= ++++++++ >=20 > Please split the bindings into different patches and put them closer to t= he > drivers that use them in the series. Ok, I will fix it in V2. >=20 > > 2 files changed, 50 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > create mode 100644 > > Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > > > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > new file mode 100644 > > index 0000000..4f52efa > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > @@ -0,0 +1,13 @@ > > +* Clock bindings for Freescale i.MX6 UltraLite > > + > > +Required properties: > > +- compatible: Should be "fsl,imx6sll-ccm" > > +- reg: Address and length of the register set > > +- #clock-cells: Should be <1> > > +- clocks: list of clock specifiers, must contain an entry for each > > +required > > + entry in clock-names > > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ip= p_di1" > > + > > +The clock consumer should specify the desired clock by having the > > +clock ID in its "clocks" phandle cell. See > > +include/dt-bindings/clock/imx6sll-clock.h > > +for the full list of i.MX6 SLL clock IDs. >=20 > Can you add an example node here? >=20 Thanks for review, I will add it in V2.=20 > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linu= x > Foundation Collaborative Project ^ permalink raw reply [flat|nested] 60+ messages in thread
[parent not found: <1480660774-25055-11-git-send-email-ping.bai-3arQi8VN3Tc@public.gmane.org>]
* Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-09 18:12 ` Rob Herring -1 siblings, 0 replies; 60+ messages in thread From: Rob Herring @ 2016-12-09 18:12 UTC (permalink / raw) To: Bai Ping Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, mturquette-rdvid1DuHRBWk0Htik3J/w, sboyd-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8, linus.walleij-QSEj5FYQhm4dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A, linux-gpio-u79uwXL29TY76Z2rM5mHXA, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, fabio.estevam-3arQi8VN3Tc, tglx-hfZtesqFncYOwBW4kG4KsQ, linux-clk-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On Fri, Dec 02, 2016 at 02:39:33PM +0800, Bai Ping wrote: > Add necessary document update for i.MX6SLL support. > > Signed-off-by: Bai Ping <ping.bai-3arQi8VN3Tc@public.gmane.org> > --- > .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ > .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ > 2 files changed, 50 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt > create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > new file mode 100644 > index 0000000..4f52efa > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > @@ -0,0 +1,13 @@ > +* Clock bindings for Freescale i.MX6 UltraLite I thought UltraLite was MX6UL? > + > +Required properties: > +- compatible: Should be "fsl,imx6sll-ccm" > +- reg: Address and length of the register set > +- #clock-cells: Should be <1> > +- clocks: list of clock specifiers, must contain an entry for each required > + entry in clock-names > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" > + > +The clock consumer should specify the desired clock by having the clock > +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h > +for the full list of i.MX6 SLL clock IDs. > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > new file mode 100644 > index 0000000..096e471 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > @@ -0,0 +1,37 @@ > +* Freescale i.MX6 UltraLite IOMUX Controller ditto > + > +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part > +and usage. > + > +Required properties: > +- compatible: "fsl,imx6sll-iomuxc" > +- fsl,pins: each entry consists of 6 integers and represents the mux and config > + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val > + input_val> are specified using a PIN_FUNC_ID macro, which can be found in > + imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is > + the pad setting value like pull-up on this pin. Please refer to i.MX6SLL > + Reference Manual for detailed CONFIG settings. > + > +CONFIG bits definition: > +PAD_CTL_LVE (1 << 22) > +PAD_CTL_HYS (1 << 16) > +PAD_CTL_PUS_100K_DOWN (0 << 14) > +PAD_CTL_PUS_47K_UP (1 << 14) > +PAD_CTL_PUS_100K_UP (2 << 14) > +PAD_CTL_PUS_22K_UP (3 << 14) > +PAD_CTL_PUE (1 << 13) > +PAD_CTL_PKE (1 << 12) > +PAD_CTL_ODE (1 << 11) > +PAD_CTL_SPEED_LOW (0 << 6) > +PAD_CTL_SPEED_MED (1 << 6) > +PAD_CTL_SPEED_HIGH (3 << 6) > +PAD_CTL_DSE_DISABLE (0 << 3) > +PAD_CTL_DSE_260ohm (1 << 3) > +PAD_CTL_DSE_130ohm (2 << 3) > +PAD_CTL_DSE_87ohm (3 << 3) > +PAD_CTL_DSE_65ohm (4 << 3) > +PAD_CTL_DSE_52ohm (5 << 3) > +PAD_CTL_DSE_43ohm (6 << 3) > +PAD_CTL_DSE_37ohm (7 << 3) > +PAD_CTL_SRE_FAST (1 << 0) > +PAD_CTL_SRE_SLOW (0 << 0) > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll @ 2016-12-09 18:12 ` Rob Herring 0 siblings, 0 replies; 60+ messages in thread From: Rob Herring @ 2016-12-09 18:12 UTC (permalink / raw) To: linux-arm-kernel On Fri, Dec 02, 2016 at 02:39:33PM +0800, Bai Ping wrote: > Add necessary document update for i.MX6SLL support. > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > --- > .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ > .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ > 2 files changed, 50 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt > create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > new file mode 100644 > index 0000000..4f52efa > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > @@ -0,0 +1,13 @@ > +* Clock bindings for Freescale i.MX6 UltraLite I thought UltraLite was MX6UL? > + > +Required properties: > +- compatible: Should be "fsl,imx6sll-ccm" > +- reg: Address and length of the register set > +- #clock-cells: Should be <1> > +- clocks: list of clock specifiers, must contain an entry for each required > + entry in clock-names > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" > + > +The clock consumer should specify the desired clock by having the clock > +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h > +for the full list of i.MX6 SLL clock IDs. > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > new file mode 100644 > index 0000000..096e471 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > @@ -0,0 +1,37 @@ > +* Freescale i.MX6 UltraLite IOMUX Controller ditto > + > +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part > +and usage. > + > +Required properties: > +- compatible: "fsl,imx6sll-iomuxc" > +- fsl,pins: each entry consists of 6 integers and represents the mux and config > + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val > + input_val> are specified using a PIN_FUNC_ID macro, which can be found in > + imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is > + the pad setting value like pull-up on this pin. Please refer to i.MX6SLL > + Reference Manual for detailed CONFIG settings. > + > +CONFIG bits definition: > +PAD_CTL_LVE (1 << 22) > +PAD_CTL_HYS (1 << 16) > +PAD_CTL_PUS_100K_DOWN (0 << 14) > +PAD_CTL_PUS_47K_UP (1 << 14) > +PAD_CTL_PUS_100K_UP (2 << 14) > +PAD_CTL_PUS_22K_UP (3 << 14) > +PAD_CTL_PUE (1 << 13) > +PAD_CTL_PKE (1 << 12) > +PAD_CTL_ODE (1 << 11) > +PAD_CTL_SPEED_LOW (0 << 6) > +PAD_CTL_SPEED_MED (1 << 6) > +PAD_CTL_SPEED_HIGH (3 << 6) > +PAD_CTL_DSE_DISABLE (0 << 3) > +PAD_CTL_DSE_260ohm (1 << 3) > +PAD_CTL_DSE_130ohm (2 << 3) > +PAD_CTL_DSE_87ohm (3 << 3) > +PAD_CTL_DSE_65ohm (4 << 3) > +PAD_CTL_DSE_52ohm (5 << 3) > +PAD_CTL_DSE_43ohm (6 << 3) > +PAD_CTL_DSE_37ohm (7 << 3) > +PAD_CTL_SRE_FAST (1 << 0) > +PAD_CTL_SRE_SLOW (0 << 0) > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll @ 2016-12-09 18:12 ` Rob Herring 0 siblings, 0 replies; 60+ messages in thread From: Rob Herring @ 2016-12-09 18:12 UTC (permalink / raw) To: Bai Ping Cc: shawnguo, mturquette, sboyd, mark.rutland, linus.walleij, devicetree, kernel, daniel.lezcano, linux-gpio, p.zabel, fabio.estevam, tglx, linux-clk, linux-arm-kernel On Fri, Dec 02, 2016 at 02:39:33PM +0800, Bai Ping wrote: > Add necessary document update for i.MX6SLL support. > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > --- > .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ > .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ > 2 files changed, 50 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt > create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > new file mode 100644 > index 0000000..4f52efa > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > @@ -0,0 +1,13 @@ > +* Clock bindings for Freescale i.MX6 UltraLite I thought UltraLite was MX6UL? > + > +Required properties: > +- compatible: Should be "fsl,imx6sll-ccm" > +- reg: Address and length of the register set > +- #clock-cells: Should be <1> > +- clocks: list of clock specifiers, must contain an entry for each required > + entry in clock-names > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" > + > +The clock consumer should specify the desired clock by having the clock > +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h > +for the full list of i.MX6 SLL clock IDs. > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > new file mode 100644 > index 0000000..096e471 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > @@ -0,0 +1,37 @@ > +* Freescale i.MX6 UltraLite IOMUX Controller ditto > + > +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part > +and usage. > + > +Required properties: > +- compatible: "fsl,imx6sll-iomuxc" > +- fsl,pins: each entry consists of 6 integers and represents the mux and config > + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val > + input_val> are specified using a PIN_FUNC_ID macro, which can be found in > + imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is > + the pad setting value like pull-up on this pin. Please refer to i.MX6SLL > + Reference Manual for detailed CONFIG settings. > + > +CONFIG bits definition: > +PAD_CTL_LVE (1 << 22) > +PAD_CTL_HYS (1 << 16) > +PAD_CTL_PUS_100K_DOWN (0 << 14) > +PAD_CTL_PUS_47K_UP (1 << 14) > +PAD_CTL_PUS_100K_UP (2 << 14) > +PAD_CTL_PUS_22K_UP (3 << 14) > +PAD_CTL_PUE (1 << 13) > +PAD_CTL_PKE (1 << 12) > +PAD_CTL_ODE (1 << 11) > +PAD_CTL_SPEED_LOW (0 << 6) > +PAD_CTL_SPEED_MED (1 << 6) > +PAD_CTL_SPEED_HIGH (3 << 6) > +PAD_CTL_DSE_DISABLE (0 << 3) > +PAD_CTL_DSE_260ohm (1 << 3) > +PAD_CTL_DSE_130ohm (2 << 3) > +PAD_CTL_DSE_87ohm (3 << 3) > +PAD_CTL_DSE_65ohm (4 << 3) > +PAD_CTL_DSE_52ohm (5 << 3) > +PAD_CTL_DSE_43ohm (6 << 3) > +PAD_CTL_DSE_37ohm (7 << 3) > +PAD_CTL_SRE_FAST (1 << 0) > +PAD_CTL_SRE_SLOW (0 << 0) > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll 2016-12-09 18:12 ` Rob Herring (?) @ 2016-12-12 2:59 ` Jacky Bai -1 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-12 2:59 UTC (permalink / raw) To: Rob Herring Cc: mark.rutland, devicetree, p.zabel, mturquette, daniel.lezcano, sboyd, linux-clk, linux-gpio, kernel, jacky.baip, Fabio Estevam, tglx, shawnguo, linus.walleij, linux-arm-kernel > Subject: Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll > > On Fri, Dec 02, 2016 at 02:39:33PM +0800, Bai Ping wrote: > > Add necessary document update for i.MX6SLL support. > > > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > > --- > > .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ > > .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ > > 2 files changed, 50 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > create mode 100644 > > Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > > > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > new file mode 100644 > > index 0000000..4f52efa > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > @@ -0,0 +1,13 @@ > > +* Clock bindings for Freescale i.MX6 UltraLite > > I thought UltraLite was MX6UL? > Sorry, it is a typo, will fix in V2. > > + > > +Required properties: > > +- compatible: Should be "fsl,imx6sll-ccm" > > +- reg: Address and length of the register set > > +- #clock-cells: Should be <1> > > +- clocks: list of clock specifiers, must contain an entry for each > > +required > > + entry in clock-names > > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" > > + > > +The clock consumer should specify the desired clock by having the > > +clock ID in its "clocks" phandle cell. See > > +include/dt-bindings/clock/imx6sll-clock.h > > +for the full list of i.MX6 SLL clock IDs. > > diff --git > > a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > new file mode 100644 > > index 0000000..096e471 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.tx > > +++ t > > @@ -0,0 +1,37 @@ > > +* Freescale i.MX6 UltraLite IOMUX Controller > > ditto > Will fix in V2. Thanks for review. > > + > > +Please refer to fsl,imx-pinctrl.txt in this directory for common > > +binding part and usage. > > + > > +Required properties: > > +- compatible: "fsl,imx6sll-iomuxc" > > +- fsl,pins: each entry consists of 6 integers and represents the mux > > +and config > > + setting for one pin. The first 5 integers <mux_reg conf_reg > > +input_reg mux_val > > + input_val> are specified using a PIN_FUNC_ID macro, which can be > > +found in > > + imx6ul-pinfunc.h under device tree source folder. The last integer > > +CONFIG is > > + the pad setting value like pull-up on this pin. Please refer to > > +i.MX6SLL > > + Reference Manual for detailed CONFIG settings. > > + > > +CONFIG bits definition: > > +PAD_CTL_LVE (1 << 22) > > +PAD_CTL_HYS (1 << 16) > > +PAD_CTL_PUS_100K_DOWN (0 << 14) > > +PAD_CTL_PUS_47K_UP (1 << 14) > > +PAD_CTL_PUS_100K_UP (2 << 14) > > +PAD_CTL_PUS_22K_UP (3 << 14) > > +PAD_CTL_PUE (1 << 13) > > +PAD_CTL_PKE (1 << 12) > > +PAD_CTL_ODE (1 << 11) > > +PAD_CTL_SPEED_LOW (0 << 6) > > +PAD_CTL_SPEED_MED (1 << 6) > > +PAD_CTL_SPEED_HIGH (3 << 6) > > +PAD_CTL_DSE_DISABLE (0 << 3) > > +PAD_CTL_DSE_260ohm (1 << 3) > > +PAD_CTL_DSE_130ohm (2 << 3) > > +PAD_CTL_DSE_87ohm (3 << 3) > > +PAD_CTL_DSE_65ohm (4 << 3) > > +PAD_CTL_DSE_52ohm (5 << 3) > > +PAD_CTL_DSE_43ohm (6 << 3) > > +PAD_CTL_DSE_37ohm (7 << 3) > > +PAD_CTL_SRE_FAST (1 << 0) > > +PAD_CTL_SRE_SLOW (0 << 0) > > -- > > 1.9.1 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll @ 2016-12-12 2:59 ` Jacky Bai 0 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-12 2:59 UTC (permalink / raw) To: linux-arm-kernel > Subject: Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll > > On Fri, Dec 02, 2016 at 02:39:33PM +0800, Bai Ping wrote: > > Add necessary document update for i.MX6SLL support. > > > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > > --- > > .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ > > .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++++++++++ > > 2 files changed, 50 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > create mode 100644 > > Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > > > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > new file mode 100644 > > index 0000000..4f52efa > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > @@ -0,0 +1,13 @@ > > +* Clock bindings for Freescale i.MX6 UltraLite > > I thought UltraLite was MX6UL? > Sorry, it is a typo, will fix in V2. > > + > > +Required properties: > > +- compatible: Should be "fsl,imx6sll-ccm" > > +- reg: Address and length of the register set > > +- #clock-cells: Should be <1> > > +- clocks: list of clock specifiers, must contain an entry for each > > +required > > + entry in clock-names > > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" > > + > > +The clock consumer should specify the desired clock by having the > > +clock ID in its "clocks" phandle cell. See > > +include/dt-bindings/clock/imx6sll-clock.h > > +for the full list of i.MX6 SLL clock IDs. > > diff --git > > a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > new file mode 100644 > > index 0000000..096e471 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.tx > > +++ t > > @@ -0,0 +1,37 @@ > > +* Freescale i.MX6 UltraLite IOMUX Controller > > ditto > Will fix in V2. Thanks for review. > > + > > +Please refer to fsl,imx-pinctrl.txt in this directory for common > > +binding part and usage. > > + > > +Required properties: > > +- compatible: "fsl,imx6sll-iomuxc" > > +- fsl,pins: each entry consists of 6 integers and represents the mux > > +and config > > + setting for one pin. The first 5 integers <mux_reg conf_reg > > +input_reg mux_val > > + input_val> are specified using a PIN_FUNC_ID macro, which can be > > +found in > > + imx6ul-pinfunc.h under device tree source folder. The last integer > > +CONFIG is > > + the pad setting value like pull-up on this pin. Please refer to > > +i.MX6SLL > > + Reference Manual for detailed CONFIG settings. > > + > > +CONFIG bits definition: > > +PAD_CTL_LVE (1 << 22) > > +PAD_CTL_HYS (1 << 16) > > +PAD_CTL_PUS_100K_DOWN (0 << 14) > > +PAD_CTL_PUS_47K_UP (1 << 14) > > +PAD_CTL_PUS_100K_UP (2 << 14) > > +PAD_CTL_PUS_22K_UP (3 << 14) > > +PAD_CTL_PUE (1 << 13) > > +PAD_CTL_PKE (1 << 12) > > +PAD_CTL_ODE (1 << 11) > > +PAD_CTL_SPEED_LOW (0 << 6) > > +PAD_CTL_SPEED_MED (1 << 6) > > +PAD_CTL_SPEED_HIGH (3 << 6) > > +PAD_CTL_DSE_DISABLE (0 << 3) > > +PAD_CTL_DSE_260ohm (1 << 3) > > +PAD_CTL_DSE_130ohm (2 << 3) > > +PAD_CTL_DSE_87ohm (3 << 3) > > +PAD_CTL_DSE_65ohm (4 << 3) > > +PAD_CTL_DSE_52ohm (5 << 3) > > +PAD_CTL_DSE_43ohm (6 << 3) > > +PAD_CTL_DSE_37ohm (7 << 3) > > +PAD_CTL_SRE_FAST (1 << 0) > > +PAD_CTL_SRE_SLOW (0 << 0) > > -- > > 1.9.1 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel at lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll @ 2016-12-12 2:59 ` Jacky Bai 0 siblings, 0 replies; 60+ messages in thread From: Jacky Bai @ 2016-12-12 2:59 UTC (permalink / raw) To: Rob Herring Cc: shawnguo, mturquette, sboyd, mark.rutland, linus.walleij, devicetree, kernel, daniel.lezcano, linux-gpio, p.zabel, Fabio Estevam, tglx, linux-clk, linux-arm-kernel, jacky.baip > Subject: Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx= 6sll >=20 > On Fri, Dec 02, 2016 at 02:39:33PM +0800, Bai Ping wrote: > > Add necessary document update for i.MX6SLL support. > > > > Signed-off-by: Bai Ping <ping.bai@nxp.com> > > --- > > .../devicetree/bindings/clock/imx6sll-clock.txt | 13 ++++++++ > > .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt | 37 ++++++++++++++= ++++++++ > > 2 files changed, 50 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > create mode 100644 > > Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > > > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > new file mode 100644 > > index 0000000..4f52efa > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt > > @@ -0,0 +1,13 @@ > > +* Clock bindings for Freescale i.MX6 UltraLite >=20 > I thought UltraLite was MX6UL? >=20 Sorry, it is a typo, will fix in V2. > > + > > +Required properties: > > +- compatible: Should be "fsl,imx6sll-ccm" > > +- reg: Address and length of the register set > > +- #clock-cells: Should be <1> > > +- clocks: list of clock specifiers, must contain an entry for each > > +required > > + entry in clock-names > > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ip= p_di1" > > + > > +The clock consumer should specify the desired clock by having the > > +clock ID in its "clocks" phandle cell. See > > +include/dt-bindings/clock/imx6sll-clock.h > > +for the full list of i.MX6 SLL clock IDs. > > diff --git > > a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt > > new file mode 100644 > > index 0000000..096e471 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.tx > > +++ t > > @@ -0,0 +1,37 @@ > > +* Freescale i.MX6 UltraLite IOMUX Controller >=20 > ditto >=20 Will fix in V2. Thanks for review. > > + > > +Please refer to fsl,imx-pinctrl.txt in this directory for common > > +binding part and usage. > > + > > +Required properties: > > +- compatible: "fsl,imx6sll-iomuxc" > > +- fsl,pins: each entry consists of 6 integers and represents the mux > > +and config > > + setting for one pin. The first 5 integers <mux_reg conf_reg > > +input_reg mux_val > > + input_val> are specified using a PIN_FUNC_ID macro, which can be > > +found in > > + imx6ul-pinfunc.h under device tree source folder. The last integer > > +CONFIG is > > + the pad setting value like pull-up on this pin. Please refer to > > +i.MX6SLL > > + Reference Manual for detailed CONFIG settings. > > + > > +CONFIG bits definition: > > +PAD_CTL_LVE (1 << 22) > > +PAD_CTL_HYS (1 << 16) > > +PAD_CTL_PUS_100K_DOWN (0 << 14) > > +PAD_CTL_PUS_47K_UP (1 << 14) > > +PAD_CTL_PUS_100K_UP (2 << 14) > > +PAD_CTL_PUS_22K_UP (3 << 14) > > +PAD_CTL_PUE (1 << 13) > > +PAD_CTL_PKE (1 << 12) > > +PAD_CTL_ODE (1 << 11) > > +PAD_CTL_SPEED_LOW (0 << 6) > > +PAD_CTL_SPEED_MED (1 << 6) > > +PAD_CTL_SPEED_HIGH (3 << 6) > > +PAD_CTL_DSE_DISABLE (0 << 3) > > +PAD_CTL_DSE_260ohm (1 << 3) > > +PAD_CTL_DSE_130ohm (2 << 3) > > +PAD_CTL_DSE_87ohm (3 << 3) > > +PAD_CTL_DSE_65ohm (4 << 3) > > +PAD_CTL_DSE_52ohm (5 << 3) > > +PAD_CTL_DSE_43ohm (6 << 3) > > +PAD_CTL_DSE_37ohm (7 << 3) > > +PAD_CTL_SRE_FAST (1 << 0) > > +PAD_CTL_SRE_SLOW (0 << 0) > > -- > > 1.9.1 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH 11/11] ARM: configs: enable imx6sll support in defconfig 2016-12-02 6:39 ` Bai Ping (?) @ 2016-12-02 6:39 ` Bai Ping -1 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Enable i.MX6SLL in imx_v6_v7_defconfig. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index cbe7faf..ab8afb3 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -38,6 +38,7 @@ CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y +CONFIG_SOC_IMX6SLL=y CONFIG_SOC_IMX6SX=y CONFIG_SOC_IMX6UL=y CONFIG_SOC_IMX7D=y -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 11/11] ARM: configs: enable imx6sll support in defconfig @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: linux-arm-kernel Enable i.MX6SLL in imx_v6_v7_defconfig. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index cbe7faf..ab8afb3 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -38,6 +38,7 @@ CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y +CONFIG_SOC_IMX6SLL=y CONFIG_SOC_IMX6SX=y CONFIG_SOC_IMX6UL=y CONFIG_SOC_IMX7D=y -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH 11/11] ARM: configs: enable imx6sll support in defconfig @ 2016-12-02 6:39 ` Bai Ping 0 siblings, 0 replies; 60+ messages in thread From: Bai Ping @ 2016-12-02 6:39 UTC (permalink / raw) To: shawnguo, mturquette, sboyd, robh+dt, mark.rutland, linus.walleij Cc: kernel, fabio.estevam, daniel.lezcano, tglx, p.zabel, linux-clk, devicetree, linux-gpio, linux-arm-kernel, ping.bai Enable i.MX6SLL in imx_v6_v7_defconfig. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index cbe7faf..ab8afb3 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -38,6 +38,7 @@ CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y +CONFIG_SOC_IMX6SLL=y CONFIG_SOC_IMX6SX=y CONFIG_SOC_IMX6UL=y CONFIG_SOC_IMX7D=y -- 1.9.1 ^ permalink raw reply related [flat|nested] 60+ messages in thread
end of thread, other threads:[~2016-12-13 23:28 UTC | newest]
Thread overview: 60+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-02 6:39 [PATCH 00/11] Add basic code support for imx6sll Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` [PATCH 01/11] ARM: imx: Add basic msl " Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` [PATCH 02/11] driver: clocksource: add gpt timer " Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` [PATCH 03/11] driver: clk: imx: Add clock driver " Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-08 22:52 ` Stephen Boyd
2016-12-08 22:52 ` Stephen Boyd
2016-12-12 2:58 ` Jacky Bai
2016-12-12 2:58 ` Jacky Bai
2016-12-12 2:58 ` Jacky Bai
2016-12-13 23:28 ` Stephen Boyd
2016-12-13 23:28 ` Stephen Boyd
2016-12-13 23:28 ` Stephen Boyd
2016-12-02 6:39 ` [PATCH 04/11] driver: pinctrl: imx: Add pinctrl driver support " Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` Bai Ping
[not found] ` <1480660774-25055-1-git-send-email-ping.bai-3arQi8VN3Tc@public.gmane.org>
2016-12-02 6:39 ` [PATCH 05/11] ARM: dts: imx: Add basic dtsi " Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` [PATCH 06/11] ARM: dts: imx: Add imx6sll EVK board dts support Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-05 10:25 ` Fabio Estevam
2016-12-05 10:25 ` Fabio Estevam
2016-12-05 10:25 ` Fabio Estevam
2016-12-06 8:39 ` Jacky Bai
2016-12-06 8:39 ` Jacky Bai
2016-12-06 8:39 ` Jacky Bai
2016-12-02 6:39 ` [PATCH 07/11] ARM: debug: Add low level debug support for imx6sll Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` [PATCH 08/11] ARM: imx: Add suspend/resume " Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` [PATCH 09/11] ARM: imx: correct i.mx6sll dram io low power mode Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-08 22:54 ` Stephen Boyd
2016-12-08 22:54 ` Stephen Boyd
2016-12-12 2:32 ` Jacky Bai
2016-12-12 2:32 ` Jacky Bai
2016-12-12 2:32 ` Jacky Bai
[not found] ` <1480660774-25055-11-git-send-email-ping.bai-3arQi8VN3Tc@public.gmane.org>
2016-12-09 18:12 ` Rob Herring
2016-12-09 18:12 ` Rob Herring
2016-12-09 18:12 ` Rob Herring
2016-12-12 2:59 ` Jacky Bai
2016-12-12 2:59 ` Jacky Bai
2016-12-12 2:59 ` Jacky Bai
2016-12-02 6:39 ` [PATCH 11/11] ARM: configs: enable imx6sll support in defconfig Bai Ping
2016-12-02 6:39 ` Bai Ping
2016-12-02 6:39 ` Bai Ping
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.