* [U-Boot] [PATCH][v3] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS
@ 2016-10-04 11:46 Pratiyush Mohan Srivastava
2016-10-06 16:32 ` york sun
0 siblings, 1 reply; 3+ messages in thread
From: Pratiyush Mohan Srivastava @ 2016-10-04 11:46 UTC (permalink / raw)
To: u-boot
LS1012AFRDM has 512MB of DDR.
So update Kernel load address as 0x96000000 instead of default
0xa0000000.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
---
Changes for v3:
- Rebased v2 patch to master
- Removed "initrd_high=0xffffffff\0"
- Removed console variable "console=ttyAMA0,115200n8\0"
Changes for v2: Incorporated York's comments
- Removed ramdisk_addr, ramdisk_size
- Updated UART baud-rate.
include/configs/ls1012afrdm.h | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index 612f243..5763d86 100644
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -20,6 +20,18 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "verify=no\0" \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "loadaddr=0x80100000\0" \
+ "kernel_addr=0x100000\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0xa00000\0" \
+ "kernel_load=0x96000000\0" \
+ "kernel_size=0x2800000\0"
+
/*
* USB
*/
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH][v3] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS
2016-10-04 11:46 [U-Boot] [PATCH][v3] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS Pratiyush Mohan Srivastava
@ 2016-10-06 16:32 ` york sun
2016-10-07 5:34 ` Pratiyush Srivastava
0 siblings, 1 reply; 3+ messages in thread
From: york sun @ 2016-10-06 16:32 UTC (permalink / raw)
To: u-boot
On 10/04/2016 04:38 AM, Pratiyush Mohan Srivastava wrote:
> LS1012AFRDM has 512MB of DDR.
> So update Kernel load address as 0x96000000 instead of default
> 0xa0000000.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
> ---
> Changes for v3:
> - Rebased v2 patch to master
> - Removed "initrd_high=0xffffffff\0"
> - Removed console variable "console=ttyAMA0,115200n8\0"
>
> Changes for v2: Incorporated York's comments
> - Removed ramdisk_addr, ramdisk_size
> - Updated UART baud-rate.
>
> include/configs/ls1012afrdm.h | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
> index 612f243..5763d86 100644
> --- a/include/configs/ls1012afrdm.h
> +++ b/include/configs/ls1012afrdm.h
> @@ -20,6 +20,18 @@
> #define CONFIG_SYS_MEMTEST_START 0x80000000
> #define CONFIG_SYS_MEMTEST_END 0x9fffffff
>
> +#undef CONFIG_EXTRA_ENV_SETTINGS
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "verify=no\0" \
Why do you need this?
> + "hwconfig=fsl_ddr:bank_intlv=auto\0" \
This board doesn't use Freescale DDR driver. This hwconfig is not used.
> + "loadaddr=0x80100000\0" \
> + "kernel_addr=0x100000\0" \
> + "fdt_high=0xffffffffffffffff\0" \
> + "initrd_high=0xffffffffffffffff\0" \
> + "kernel_start=0xa00000\0" \
> + "kernel_load=0x96000000\0" \
> + "kernel_size=0x2800000\0"
> +
York
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH][v3] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS
2016-10-06 16:32 ` york sun
@ 2016-10-07 5:34 ` Pratiyush Srivastava
0 siblings, 0 replies; 3+ messages in thread
From: Pratiyush Srivastava @ 2016-10-07 5:34 UTC (permalink / raw)
To: u-boot
> -----Original Message-----
> From: york sun
> Sent: Thursday, October 06, 2016 10:02 PM
> To: Pratiyush Srivastava <pratiyush.srivastava@nxp.com>; u-
> boot at lists.denx.de
> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
> Subject: Re: [PATCH][v3] board: ls1012afrdm: overwrite
> CONFIG_EXTRA_ENV_SETTINGS
>
> On 10/04/2016 04:38 AM, Pratiyush Mohan Srivastava wrote:
> > LS1012AFRDM has 512MB of DDR.
> > So update Kernel load address as 0x96000000 instead of default
> > 0xa0000000.
> >
> > Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
> > Signed-off-by: Pratiyush Mohan Srivastava
> > <pratiyush.srivastava@nxp.com>
> > ---
> > Changes for v3:
> > - Rebased v2 patch to master
> > - Removed "initrd_high=0xffffffff\0"
> > - Removed console variable "console=ttyAMA0,115200n8\0"
> >
> > Changes for v2: Incorporated York's comments
> > - Removed ramdisk_addr, ramdisk_size
> > - Updated UART baud-rate.
> >
> > include/configs/ls1012afrdm.h | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/include/configs/ls1012afrdm.h
> > b/include/configs/ls1012afrdm.h index 612f243..5763d86 100644
> > --- a/include/configs/ls1012afrdm.h
> > +++ b/include/configs/ls1012afrdm.h
> > @@ -20,6 +20,18 @@
> > #define CONFIG_SYS_MEMTEST_START 0x80000000
> > #define CONFIG_SYS_MEMTEST_END 0x9fffffff
> >
> > +#undef CONFIG_EXTRA_ENV_SETTINGS
> > +#define CONFIG_EXTRA_ENV_SETTINGS \
> > + "verify=no\0" \
>
> Why do you need this?
[Pratiyush>] This is needed for fast-boot.
>
> > + "hwconfig=fsl_ddr:bank_intlv=auto\0" \
>
> This board doesn't use Freescale DDR driver. This hwconfig is not used.
[Pratiyush>] ok I will remove it
>
> > + "loadaddr=0x80100000\0" \
> > + "kernel_addr=0x100000\0" \
> > + "fdt_high=0xffffffffffffffff\0" \
> > + "initrd_high=0xffffffffffffffff\0" \
> > + "kernel_start=0xa00000\0" \
> > + "kernel_load=0x96000000\0" \
> > + "kernel_size=0x2800000\0"
> > +
>
> York
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-10-07 5:34 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-04 11:46 [U-Boot] [PATCH][v3] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS Pratiyush Mohan Srivastava
2016-10-06 16:32 ` york sun
2016-10-07 5:34 ` Pratiyush Srivastava
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.