* [dev-4.7 patch 5/5] arch/arm: introduce support for Mallanox evb aspeed 2500 config and dts flavors
@ 2016-08-10 7:03 vadimp
2016-08-17 5:13 ` Joel Stanley
0 siblings, 1 reply; 7+ messages in thread
From: vadimp @ 2016-08-10 7:03 UTC (permalink / raw)
To: openbmc; +Cc: jiri, michaelsh, shays, yanivab, Vadim Pasternak
From: Vadim Pasternak <vadimp@mellanox.com>
Add kernel configuration and dts files.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi | 32 +
arch/arm/boot/dts/aspeed-g5-mlx.dtsi | 429 +++
arch/arm/boot/dts/mlx-ast2500-bmc.dts | 109 +
arch/arm/configs/mlx_bmc_defconfig | 2786 ++++++++++++++++++++
5 files changed, 3358 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi
create mode 100644 arch/arm/boot/dts/aspeed-g5-mlx.dtsi
create mode 100644 arch/arm/boot/dts/mlx-ast2500-bmc.dts
create mode 100644 arch/arm/configs/mlx_bmc_defconfig
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 048fbb5..2e364e6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -895,7 +895,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-firestone.dtb \
aspeed-bmc-opp-garrison.dtb \
aspeed-bmc-opp-witherspoon.dtb \
- aspeed-ast2500-evb.dtb
+ aspeed-ast2500-evb.dtb \
+ mlx-ast2500-bmc.dtb
endif
dtstree := $(srctree)/$(src)
diff --git a/arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi b/arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi
new file mode 100644
index 0000000..1c5ae2b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi
@@ -0,0 +1,32 @@
+/* This file is the label for the bmc primary flash and its partitions */
+ label = "bmc";
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ u-boot {
+ reg = < 0 0x60000 >;
+ label = "u-boot";
+ };
+ u-boot-env {
+ reg = < 0x60000 0x30000 >;
+ label = "u-boot-env";
+ };
+ kernel {
+ reg = < 0x90000 0x27e000 >;
+ label = "kernel";
+ };
+ dtb {
+ reg = < 0x30e000 0x2000 >;
+ label = "dtb";
+ };
+ initramfs {
+ reg = < 0x310000 0x1c0000 >;
+ label = "initramfs";
+ };
+ rofs {
+ reg = < 0x4d0000 0x1740000 >;
+ label = "rofs";
+ };
+ rwfs {
+ reg = < 0x1c10000 0x3f0000 >;
+ label = "rwfs";
+ };
diff --git a/arch/arm/boot/dts/aspeed-g5-mlx.dtsi b/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
new file mode 100644
index 0000000..0f4cce9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
@@ -0,0 +1,429 @@
+#include "skeleton.dtsi"
+
+/ {
+ model = "Aspeed BMC";
+ compatible = "aspeed,ast2500";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&vic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,arm1176jzf-s";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ fmc@1e620000 {
+ reg = < 0x1e620000 0x94
+ 0x20000000 0x02000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,fmc";
+
+ flash@0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor" ;
+#include "aspeed-bmc-mlx-flash-layout.dtsi"
+ };
+ };
+
+ pinmux: pinmux@1e6e2000 {
+ reg= <0x1e6e2000 0x1000>;
+ compatible = "aspeed,ast2500-pinctrl";
+ };
+
+ vic: interrupt-controller@1e6c0080 {
+ compatible = "aspeed,ast2400-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-sources = <0xfefff7ff 0x0807ffff>;
+ reg = <0x1e6c0080 0x80>;
+ };
+
+ mac0: ethernet@1e660000 {
+ compatible = "faraday,ftgmac100";
+ reg = <0x1e660000 0x180>;
+ interrupts = <2>;
+ no-hw-checksum;
+ status = "disabled";
+ };
+
+ mac1: ethernet@1e680000 {
+ compatible = "faraday,ftgmac100";
+ reg = <0x1e680000 0x180>;
+ interrupts = <3>;
+ no-hw-checksum;
+ status = "disabled";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clk_clkin: clk_clkin@1e6e2070 {
+ #clock-cells = <0>;
+ compatible = "aspeed,g5-clkin-clock";
+ reg = <0x1e6e2070 0x04>;
+ };
+
+ clk_hpll: clk_hpll@1e6e2024 {
+ #clock-cells = <0>;
+ compatible = "aspeed,g5-hpll-clock";
+ reg = <0x1e6e2024 0x4>;
+ clocks = <&clk_clkin>;
+ };
+
+ clk_ahb: clk_ahb@1e6e2070 {
+ #clock-cells = <0>;
+ compatible = "aspeed,g5-ahb-clock";
+ reg = <0x1e6e2070 0x4>;
+ clocks = <&clk_hpll>;
+ };
+
+ clk_apb: clk_apb@1e6e2008 {
+ #clock-cells = <0>;
+ compatible = "aspeed,g5-apb-clock";
+ reg = <0x1e6e2008 0x4>;
+ clocks = <&clk_hpll>;
+ };
+
+ clk_uart: clk_uart@1e6e2008 {
+ #clock-cells = <0>;
+ compatible = "aspeed,uart-clock";
+ reg = <0x1e6e202c 0x4>;
+ };
+
+ sram@1e720000 {
+ compatible = "mmio-sram";
+ reg = <0x1e720000 0x9000>; // 36K
+ };
+
+ timer: timer@1e782000 {
+ compatible = "aspeed,ast2400-timer";
+ reg = <0x1e782000 0x90>;
+ // The moxart_timer driver registers only one
+ // interrupt and assumes it's for timer 1
+ //interrupts = <16 17 18 35 36 37 38 39>;
+ interrupts = <16>;
+ clocks = <&clk_apb>;
+ };
+
+ ibt: ibt@1e789140 {
+ compatible = "aspeed,bt-host";
+ reg = <0x1e789140 0x18>;
+ interrupts = <8>;
+ };
+
+ wdt1: wdt@1e785000 {
+ compatible = "aspeed,ast2500-wdt";
+ reg = <0x1e785000 0x1c>;
+ };
+
+ wdt2: wdt@1e785020 {
+ compatible = "aspeed,ast2500-wdt";
+ reg = <0x1e785020 0x1c>;
+ status = "disabled";
+ };
+
+ wdt3: wdt@1e785040 {
+ compatible = "aspeed,wdt";
+ reg = <0x1e785074 0x1c>;
+ status = "disabled";
+ };
+
+ gpio: gpio@1e780000 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2400-gpio";
+ reg = <0x1e780000 0x1000>;
+ interrupts = <20>;
+ };
+
+ uart1: serial@1e783000 {
+ compatible = "ns16550a";
+ reg = <0x1e783000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <9>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart2: serial@1e78d000 {
+ compatible = "ns16550a";
+ reg = <0x1e78d000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <32>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart3: serial@1e78e000 {
+ compatible = "ns16550a";
+ reg = <0x1e78e000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <33>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart4: serial@1e78f000 {
+ compatible = "ns16550a";
+ reg = <0x1e78f000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <34>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart5: serial@1e784000 {
+ compatible = "ns16550a";
+ reg = <0x1e784000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ current-speed = <38400>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ uart6: serial@1e787000 {
+ compatible = "ns16550a";
+ reg = <0x1e787000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ pwm: pwm@1e786000 {
+ cooling-min-level = <0>;
+ cooling-max-level = <3>;
+ #cooling-cells = <2>; /* min followed by max */
+ compatible = "aspeed,aspeed2500-pwm-fan";
+ reg = <0x1e786000 0x7c>;
+ reg-shift = <2>;
+ interrupts = <28>;
+ status = "disabled";
+ };
+
+ peci: peci@1e78b000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ compatible = "aspeed,aspeed2500-peci";
+ reg = <0x1e78b000 0x60>;
+ reg-shift = <2>;
+ interrupts = <15>;
+ status = "disabled";
+ };
+
+ jtag: jtag@1e6e4000 {
+ compatible = "aspeed,aspeed2500-jtag";
+ reg = <0x1e6e4000 0x1c>;
+ reg-shift = <2>;
+ interrupts = <43>;
+ status = "disabled";
+ };
+
+ i2c: i2c@1e78a000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+
+ compatible = "aspeed,ast2400-i2c-controller";
+ reg = <0x1e78a000 0x40>;
+ ranges = <0 0x1e78a000 0x1000>;
+ interrupts = <12>;
+ clocks = <&clk_apb>;
+ clock-ranges;
+ interrupt-controller;
+
+ i2c0: i2c-bus@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <0>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c1: i2c-bus@80 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <1>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <1>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c2: i2c-bus@c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xC0 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <2>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <2>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c3: i2c-bus@100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x100 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <3>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <3>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c4: i2c-bus@140 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x140 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <4>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <4>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c5: i2c-bus@180 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x180 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <5>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <5>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c6: i2c-bus@1c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1C0 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <6>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <6>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c7: i2c-bus@300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x300 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <7>;
+ clock-frequency = <100000>;
+ status = "ok";
+ interrupts = <7>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c8: i2c-bus@340 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x340 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <8>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <8>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c9: i2c-bus@380 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x380 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <9>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <9>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c10: i2c-bus@3c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3c0 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <10>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <10>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c11: i2c-bus@400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x400 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <11>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <11>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c12: i2c-bus@440 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x440 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <12>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <12>;
+ interrupt-parent = <&i2c>;
+ };
+
+ i2c13: i2c-bus@480 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x480 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ bus = <13>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ interrupts = <13>;
+ interrupt-parent = <&i2c>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/mlx-ast2500-bmc.dts b/arch/arm/boot/dts/mlx-ast2500-bmc.dts
new file mode 100644
index 0000000..0817a67
--- /dev/null
+++ b/arch/arm/boot/dts/mlx-ast2500-bmc.dts
@@ -0,0 +1,109 @@
+/dts-v1/;
+
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "aspeed-g5-mlx.dtsi"
+
+/ {
+ model = "AST2500 EVB";
+ compatible = "mellanox,mlx-bmc", "aspeed,ast2500-evb", "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ aliases {
+ serial0 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200n8";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+};
+
+&mac1 {
+ status = "okay";
+ use-nc-si;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&peci {
+ status = "okay";
+};
+
+&jtag {
+ status = "okay";
+};
+
diff --git a/arch/arm/configs/mlx_bmc_defconfig b/arch/arm/configs/mlx_bmc_defconfig
new file mode 100644
index 0000000..b381dc5
--- /dev/null
+++ b/arch/arm/configs/mlx_bmc_defconfig
@@ -0,0 +1,2786 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/arm 4.6.4 Kernel Configuration
+#
+CONFIG_ARM=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+
+#
+# General setup
+#
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_LZ4=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_KERNEL_XZ=y
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_KERNEL_LZ4 is not set
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_FHANDLE=y
+CONFIG_USELIB=y
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ_COMMON=y
+# CONFIG_HZ_PERIODIC is not set
+CONFIG_NO_HZ_IDLE=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# CPU/Task time and stats accounting
+#
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_RCU_EXPERT is not set
+CONFIG_SRCU=y
+# CONFIG_TASKS_RCU is not set
+# CONFIG_RCU_STALL_COMMON is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_EXPEDITE_BOOT is not set
+# CONFIG_BUILD_BIN2C is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_CGROUPS=y
+# CONFIG_MEMCG is not set
+# CONFIG_BLK_CGROUP is not set
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUP_PIDS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CPUSETS is not set
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../initramfs"
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_HAVE_UID16=y
+CONFIG_BPF=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_MULTIUSER=y
+# CONFIG_SGETMASK_SYSCALL is not set
+CONFIG_SYSFS_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
+CONFIG_KALLSYMS_BASE_RELATIVE=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+CONFIG_ADVISE_SYSCALLS=y
+# CONFIG_USERFAULTFD is not set
+CONFIG_MEMBARRIER=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_SYSTEM_DATA_VERIFICATION is not set
+# CONFIG_PROFILING is not set
+CONFIG_KEXEC_CORE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+# CONFIG_UPROBES is not set
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR is not set
+CONFIG_CC_STACKPROTECTOR_NONE=y
+# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
+CONFIG_ARCH_MMAP_RND_BITS_MIN=8
+CONFIG_ARCH_MMAP_RND_BITS_MAX=16
+CONFIG_ARCH_MMAP_RND_BITS=8
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OLD_SIGACTION=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_MODULE_SIG is not set
+# CONFIG_MODULE_COMPRESS is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_BSGLIB is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_CMDLINE_PARSER is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_EFI_PARTITION=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C24XX is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP1 is not set
+
+#
+# Multiple platform selection
+#
+
+#
+# CPU Core family selection
+#
+CONFIG_ARCH_MULTI_V6=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+# CONFIG_ARCH_BCM is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+CONFIG_ARCH_ASPEED=y
+CONFIG_MACH_ASPEED_G5=y
+# CONFIG_ARCH_MXC is not set
+
+#
+# TI OMAP/AM/DM/DRA Family
+#
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_PICOXCELL is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_WM8750 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_V6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_KUSER_HELPERS=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_CACHE_L2X0=y
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_DEBUG_RODATA=y
+CONFIG_DEBUG_ALIGN_RODATA=y
+CONFIG_MULTI_IRQ_HANDLER=y
+# CONFIG_ARM_ERRATA_326103 is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+# CONFIG_ARM_ERRATA_364296 is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS_GENERIC is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_100=y
+# CONFIG_HZ_200 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_500 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HAVE_ARCH_PFN_VALID=y
+# CONFIG_HIGHMEM is not set
+CONFIG_CPU_SW_DOMAIN_PAN=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+# CONFIG_ARM_MODULE_PLTS is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_NO_BOOTMEM=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+# CONFIG_CMA is not set
+# CONFIG_ZPOOL is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
+CONFIG_GENERIC_EARLY_IOREMAP=y
+# CONFIG_IDLE_PAGE_TRACKING is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_SECCOMP=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_PARAVIRT is not set
+# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
+
+#
+# Boot options
+#
+CONFIG_USE_OF=y
+CONFIG_ATAGS=y
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
+CONFIG_CMDLINE=""
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_EFI is not set
+
+#
+# CPU Power Management
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# CPU Idle
+#
+# CONFIG_CPU_IDLE is not set
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_SCRIPT=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_COREDUMP=y
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_SUSPEND_SKIP_SYNC is not set
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_AUTOSLEEP is not set
+# CONFIG_PM_WAKELOCKS is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_CLK=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_CPU_PM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_NET_IP_TUNNEL is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_NET_UDP_TUNNEL is not set
+# CONFIG_NET_FOU is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_INET_UDP_DIAG=y
+# CONFIG_INET_DIAG_DESTROY is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NET_PTP_CLASSIFY is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+CONFIG_HAVE_NET_DSA=y
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_OPENVSWITCH is not set
+# CONFIG_VSOCKETS is not set
+# CONFIG_NETLINK_DIAG is not set
+# CONFIG_MPLS is not set
+# CONFIG_HSR is not set
+CONFIG_NET_SWITCHDEV=y
+# CONFIG_NET_L3_MASTER_DEV is not set
+CONFIG_NET_NCSI=y
+# CONFIG_SOCK_CGROUP_DATA is not set
+# CONFIG_CGROUP_NET_PRIO is not set
+# CONFIG_CGROUP_NET_CLASSID is not set
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_BQL=y
+# CONFIG_BPF_JIT is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AF_KCM is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NFC is not set
+# CONFIG_LWTUNNEL is not set
+# CONFIG_DST_CACHE is not set
+# CONFIG_NET_DEVLINK is not set
+CONFIG_MAY_USE_DEVLINK=y
+CONFIG_HAVE_BPF_JIT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
+CONFIG_ALLOW_DEV_COREDUMP=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGMAP_MMIO=y
+# CONFIG_DMA_SHARED_BUFFER is not set
+
+#
+# Bus devices
+#
+# CONFIG_BRCMSTB_GISB_ARB is not set
+# CONFIG_VEXPRESS_CONFIG is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_SWAP is not set
+CONFIG_MTD_PARTITIONED_MASTER=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOCG3 is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_DENALI_DT is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_DOCG4 is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_BRCMNAND is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_HISI504 is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR & LPDDR2 PCM memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_LPDDR2_NVM is not set
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_MT81xx_NOR is not set
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+CONFIG_ASPEED_FLASH_SPI=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_LIMIT=20
+# CONFIG_MTD_UBI_FASTMAP is not set
+CONFIG_MTD_UBI_GLUEBI=y
+# CONFIG_MTD_UBI_BLOCK is not set
+CONFIG_DTC=y
+CONFIG_OF=y
+# CONFIG_OF_UNITTEST is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_NET=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_RESERVED_MEM=y
+# CONFIG_OF_OVERLAY is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+
+#
+# Misc devices
+#
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_DUMMY_IRQ is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085_I2C is not set
+# CONFIG_BMP085_SPI is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+CONFIG_SRAM=y
+CONFIG_ASPEED_BT_IPMI_HOST=y
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_EEPROM_93XX46 is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+
+#
+# Intel MIC Bus Driver
+#
+
+#
+# SCIF Bus Driver
+#
+
+#
+# VOP Bus Driver
+#
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
+
+#
+# SCIF Driver
+#
+
+#
+# Intel MIC Coprocessor State Management (COSM) Drivers
+#
+
+#
+# VOP Driver
+#
+# CONFIG_ECHO is not set
+# CONFIG_CXL_BASE is not set
+# CONFIG_CXL_KERNEL_API is not set
+# CONFIG_CXL_EEH is not set
+
+#
+# ASPEED devices support
+#
+CONFIG_ASPEED_PECI=y
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_CORE=y
+# CONFIG_BONDING is not set
+# CONFIG_DUMMY is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_NET_TEAM is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_VXLAN is not set
+# CONFIG_MACSEC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_TUN is not set
+# CONFIG_TUN_VNET_CROSS_LE is not set
+# CONFIG_VETH is not set
+# CONFIG_NLMON is not set
+
+#
+# CAIF transport drivers
+#
+
+#
+# Distributed Switch Architecture drivers
+#
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+CONFIG_ETHERNET=y
+# CONFIG_ALTERA_TSE is not set
+CONFIG_NET_VENDOR_ARC=y
+# CONFIG_ARC_EMAC is not set
+# CONFIG_NET_VENDOR_AURORA is not set
+CONFIG_NET_CADENCE=y
+# CONFIG_MACB is not set
+CONFIG_NET_VENDOR_BROADCOM=y
+# CONFIG_B44 is not set
+# CONFIG_BCMGENET is not set
+# CONFIG_SYSTEMPORT is not set
+CONFIG_NET_VENDOR_CIRRUS=y
+# CONFIG_CS89x0 is not set
+# CONFIG_DM9000 is not set
+# CONFIG_DNET is not set
+CONFIG_NET_VENDOR_EZCHIP=y
+# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
+CONFIG_NET_VENDOR_FARADAY=y
+# CONFIG_FTMAC100 is not set
+CONFIG_FTGMAC100=y
+CONFIG_NET_VENDOR_HISILICON=y
+# CONFIG_HIX5HD2_GMAC is not set
+# CONFIG_HIP04_ETH is not set
+# CONFIG_HNS is not set
+# CONFIG_HNS_DSAF is not set
+# CONFIG_HNS_ENET is not set
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_NET_VENDOR_MARVELL=y
+# CONFIG_MVMDIO is not set
+# CONFIG_MVNETA_BM is not set
+CONFIG_NET_VENDOR_MICREL=y
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NET_VENDOR_MICROCHIP=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NET_VENDOR_NETRONOME=y
+CONFIG_NET_VENDOR_8390=y
+# CONFIG_AX88796 is not set
+# CONFIG_ETHOC is not set
+CONFIG_NET_VENDOR_QUALCOMM=y
+# CONFIG_QCA7000 is not set
+CONFIG_NET_VENDOR_RENESAS=y
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_NET_VENDOR_SAMSUNG=y
+# CONFIG_SXGBE_ETH is not set
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SMSC=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+CONFIG_NET_VENDOR_STMICRO=y
+# CONFIG_STMMAC_ETH is not set
+CONFIG_NET_VENDOR_SYNOPSYS=y
+# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
+CONFIG_NET_VENDOR_VIA=y
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_NET_VENDOR_WIZNET=y
+# CONFIG_WIZNET_W5100 is not set
+# CONFIG_WIZNET_W5300 is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AQUANTIA_PHY is not set
+# CONFIG_AT803X_PHY is not set
+# CONFIG_AMD_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_TERANETICS_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM7XXX_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_DP83848_PHY is not set
+# CONFIG_DP83867_PHY is not set
+# CONFIG_MICROCHIP_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MDIO_BCM_UNIMAC is not set
+# CONFIG_MICREL_KS8995MA is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_USB_NET_DRIVERS=y
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_RTL8152 is not set
+# CONFIG_USB_LAN78XX is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+CONFIG_WLAN=y
+CONFIG_WLAN_VENDOR_ADMTEK=y
+CONFIG_WLAN_VENDOR_ATH=y
+# CONFIG_ATH_DEBUG is not set
+CONFIG_WLAN_VENDOR_ATMEL=y
+CONFIG_WLAN_VENDOR_BROADCOM=y
+CONFIG_WLAN_VENDOR_CISCO=y
+CONFIG_WLAN_VENDOR_INTEL=y
+CONFIG_WLAN_VENDOR_INTERSIL=y
+# CONFIG_HOSTAP is not set
+CONFIG_WLAN_VENDOR_MARVELL=y
+CONFIG_WLAN_VENDOR_MEDIATEK=y
+CONFIG_WLAN_VENDOR_RALINK=y
+CONFIG_WLAN_VENDOR_REALTEK=y
+CONFIG_WLAN_VENDOR_RSI=y
+CONFIG_WLAN_VENDOR_ST=y
+CONFIG_WLAN_VENDOR_TI=y
+CONFIG_WLAN_VENDOR_ZYDAS=y
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_ISDN is not set
+# CONFIG_NVM is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_LEDS=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_MATRIXKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_LM8333 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_SAMSUNG is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_CAP11XX is not set
+# CONFIG_KEYBOARD_BCM is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_BYD=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_CYPRESS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_FOCALTECH=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_CYAPA is not set
+# CONFIG_MOUSE_ELAN_I2C is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+# CONFIG_RMI4_CORE is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_ARC_PS2 is not set
+# CONFIG_SERIO_APBPS2 is not set
+# CONFIG_USERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_TTY=y
+# CONFIG_VT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVMEM=y
+# CONFIG_DEVKMEM is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+CONFIG_SERIAL_8250_FSL=y
+# CONFIG_SERIAL_8250_DW is not set
+# CONFIG_SERIAL_8250_EM is not set
+# CONFIG_SERIAL_8250_RT288X is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_SC16IS7XX is not set
+# CONFIG_SERIAL_BCM63XX is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_FSL_LPUART is not set
+# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
+# CONFIG_SERIAL_ST_ASC is not set
+# CONFIG_SERIAL_STM32 is not set
+# CONFIG_SERIAL_MVEBU_UART is not set
+# CONFIG_TTY_PRINTK is not set
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_DCC=y
+CONFIG_IPMI_HANDLER=y
+CONFIG_IPMI_PANIC_EVENT=y
+# CONFIG_IPMI_PANIC_STRING is not set
+CONFIG_IPMI_DEVICE_INTERFACE=y
+CONFIG_IPMI_SI=y
+CONFIG_IPMI_SI_PROBE_DEFAULTS=y
+CONFIG_IPMI_SSIF=y
+CONFIG_IPMI_WATCHDOG=y
+CONFIG_IPMI_POWEROFF=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TPM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+CONFIG_TCG_TPM=y
+# CONFIG_TCG_TIS_I2C_ATMEL is not set
+# CONFIG_TCG_TIS_I2C_INFINEON is not set
+# CONFIG_TCG_TIS_I2C_NUVOTON is not set
+# CONFIG_TCG_ATMEL is not set
+# CONFIG_TCG_TIS_ST33ZP24 is not set
+# CONFIG_XILLYBUS is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CBUS_GPIO is not set
+# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
+# CONFIG_I2C_EMEV2 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_RK3X is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+CONFIG_I2C_ASPEED=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_SLAVE is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_AXI_SPI_ENGINE is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_CADENCE is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_FSL_SPI is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_ROCKCHIP is not set
+# CONFIG_SPI_SC18IS602 is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_ZYNQMP_GQSPI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_LOOPBACK_TEST is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_SPMI is not set
+# CONFIG_HSI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+# CONFIG_PTP_1588_CLOCK is not set
+
+#
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
+#
+CONFIG_PINCTRL=y
+
+#
+# Pin controllers
+#
+CONFIG_PINMUX=y
+CONFIG_PINCONF=y
+CONFIG_GENERIC_PINCONF=y
+# CONFIG_DEBUG_PINCTRL is not set
+CONFIG_PINCTRL_ASPEED=y
+# CONFIG_PINCTRL_AMD is not set
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PINCTRL_ASPEED_JTAG=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_OF_GPIO=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO drivers
+#
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_GPIO_ALTERA is not set
+CONFIG_GPIO_ASPEED=y
+# CONFIG_GPIO_DWAPB is not set
+# CONFIG_GPIO_EM is not set
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_GRGPIO is not set
+# CONFIG_GPIO_MPC8XXX is not set
+# CONFIG_GPIO_SYSCON is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_ZEVIO is not set
+# CONFIG_GPIO_ZX is not set
+
+#
+# I2C GPIO expanders
+#
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_ADNP is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_TPIC2810 is not set
+
+#
+# MFD GPIO expanders
+#
+
+#
+# SPI GPIO expanders
+#
+# CONFIG_GPIO_74X164 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_PISOSR is not set
+
+#
+# SPI or I2C GPIO expanders
+#
+# CONFIG_GPIO_MCP23S08 is not set
+
+#
+# USB GPIO expanders
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_POWER_RESET is not set
+# CONFIG_POWER_AVS is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7314 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7310 is not set
+# CONFIG_SENSORS_ADT7410 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS620 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_G762 is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_HIH6130 is not set
+# CONFIG_SENSORS_IBMAEM is not set
+# CONFIG_SENSORS_IBMPEX is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_POWR1220 is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LTC2945 is not set
+# CONFIG_SENSORS_LTC2990 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4222 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4260 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX1668 is not set
+# CONFIG_SENSORS_MAX197 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6697 is not set
+# CONFIG_SENSORS_MAX31790 is not set
+# CONFIG_SENSORS_MCP3021 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95234 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LM95245 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
+# CONFIG_SENSORS_NCT6683 is not set
+# CONFIG_SENSORS_NCT6775 is not set
+# CONFIG_SENSORS_NCT7802 is not set
+# CONFIG_SENSORS_NCT7904 is not set
+# CONFIG_SENSORS_POWER8_OCC_I2C is not set
+# CONFIG_SENSORS_PCF8591 is not set
+CONFIG_PMBUS=y
+CONFIG_SENSORS_PMBUS=y
+# CONFIG_SENSORS_ADM1275 is not set
+# CONFIG_SENSORS_LM25066 is not set
+# CONFIG_SENSORS_LTC2978 is not set
+# CONFIG_SENSORS_LTC3815 is not set
+# CONFIG_SENSORS_MAX16064 is not set
+# CONFIG_SENSORS_MAX20751 is not set
+# CONFIG_SENSORS_MAX34440 is not set
+# CONFIG_SENSORS_MAX8688 is not set
+# CONFIG_SENSORS_TPS40422 is not set
+# CONFIG_SENSORS_UCD9000 is not set
+# CONFIG_SENSORS_UCD9200 is not set
+# CONFIG_SENSORS_ZL6100 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SHTC1 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SCH56XX_COMMON is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_SCH5636 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_ADC128D818 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_INA209 is not set
+# CONFIG_SENSORS_INA2XX is not set
+# CONFIG_SENSORS_TC74 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP103 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+
+#
+# ASPEED hwmon support
+#
+CONFIG_SENSORS_ASPEED_PWM_FAN=y
+# CONFIG_MELLANOX is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+# CONFIG_THERMAL_WRITABLE_TRIPS is not set
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
+CONFIG_THERMAL_GOV_STEP_WISE=y
+# CONFIG_THERMAL_GOV_BANG_BANG is not set
+# CONFIG_THERMAL_GOV_USER_SPACE is not set
+# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
+# CONFIG_THERMAL_EMULATION is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_WATCHDOG_SYSFS is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_XILINX_WATCHDOG is not set
+# CONFIG_ZIIRAVE_WATCHDOG is not set
+# CONFIG_CADENCE_WATCHDOG is not set
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_ASPEED_WATCHDOG=y
+# CONFIG_MEN_A21_WDT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_ACT8945A is not set
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_MFD_AS3722 is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_ATMEL_FLEXCOM is not set
+# CONFIG_MFD_ATMEL_HLCDC is not set
+# CONFIG_MFD_BCM590XX is not set
+# CONFIG_MFD_AXP20X_I2C is not set
+# CONFIG_MFD_CROS_EC is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9062 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_DA9150 is not set
+# CONFIG_MFD_DLN2 is not set
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_MFD_HI6421_PMIC is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_INTEL_SOC_PMIC is not set
+# CONFIG_MFD_KEMPLD is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX14577 is not set
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX77843 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_MENF21BMC is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_VIPERBOARD is not set
+# CONFIG_MFD_RETU is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_PM8921_CORE is not set
+# CONFIG_MFD_RT5033 is not set
+# CONFIG_MFD_RTSX_USB is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_RN5T618 is not set
+# CONFIG_MFD_SEC_CORE is not set
+# CONFIG_MFD_SI476X_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SKY81452 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_STMPE is not set
+CONFIG_MFD_SYSCON=y
+# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS65086 is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TPS65218 is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL6040_CORE is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CAMERA_SUPPORT is not set
+# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
+# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
+# CONFIG_MEDIA_RADIO_SUPPORT is not set
+# CONFIG_MEDIA_SDR_SUPPORT is not set
+# CONFIG_MEDIA_RC_SUPPORT is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Media drivers
+#
+CONFIG_MEDIA_USB_SUPPORT=y
+
+#
+# Supported MMC/SDIO adapters
+#
+# CONFIG_CYPRESS_FIRMWARE is not set
+
+#
+# Media ancillary drivers (tuners, sensors, i2c, frontends)
+#
+
+#
+# Customise DVB Frontends
+#
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_TUNER_DIB0090=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+
+#
+# ACP (Audio CoProcessor) Configuration
+#
+# CONFIG_DRM_AMD_ACP is not set
+
+#
+# Frame buffer Devices
+#
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_SOUND is not set
+
+#
+# HID support
+#
+CONFIG_HID=y
+# CONFIG_HID_BATTERY_STRENGTH is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_UHID is not set
+CONFIG_HID_GENERIC=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_APPLEIR is not set
+# CONFIG_HID_AUREAL is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BETOP_FF is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CORSAIR is not set
+# CONFIG_HID_CMEDIA is not set
+# CONFIG_HID_CP2112 is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_GEMBIRD is not set
+# CONFIG_HID_GFRM is not set
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_GT683R is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_ICADE is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LENOVO is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MAGICMOUSE is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PENMOUNT is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PLANTRONICS is not set
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_STEELSERIES is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_RMI is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TIVO is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THINGM is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HID_SENSOR_HUB is not set
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=y
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# I2C HID support
+#
+# CONFIG_I2C_HID is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEFAULT_PERSIST=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG_FSM is not set
+# CONFIG_USB_ULPI_BUS is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_FOTG210_HCD is not set
+# CONFIG_USB_MAX3421_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_UHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_EHCI_ASPEED=y
+# CONFIG_USB_HCD_TEST_MODE is not set
+
+#
+# ASPEED USB Drivers
+#
+CONFIG_ASPEED_USB_UHCI_HCD=y
+# CONFIG_ASPEED_USB_UHCI_1_PORT is not set
+CONFIG_ASPEED_USB_UHCI_2_PORT=y
+# CONFIG_ASPEED_USB_UHCI_4_PORT is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USBIP_CORE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_DWC3 is not set
+# CONFIG_USB_DWC2 is not set
+# CONFIG_USB_CHIPIDEA is not set
+# CONFIG_USB_ISP1760 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+# CONFIG_USB_EZUSB_FX2 is not set
+# CONFIG_USB_HSIC_USB3503 is not set
+# CONFIG_USB_LINK_LAYER_TEST is not set
+# CONFIG_USB_CHAOSKEY is not set
+
+#
+# USB Physical Layer drivers
+#
+# CONFIG_USB_PHY is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_AM335X_PHY_USB is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+
+#
+# USB Peripheral Controller
+#
+# CONFIG_USB_FUSB300 is not set
+# CONFIG_USB_FOTG210_UDC is not set
+# CONFIG_USB_GR_UDC is not set
+# CONFIG_USB_R8A66597 is not set
+# CONFIG_USB_PXA27X is not set
+# CONFIG_USB_MV_UDC is not set
+# CONFIG_USB_MV_U3D is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_BDC_UDC is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_GADGET_XILINX is not set
+# CONFIG_USB_DUMMY_HCD is not set
+CONFIG_USB_LIBCOMPOSITE=y
+CONFIG_USB_F_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS=y
+# CONFIG_USB_CONFIGFS_SERIAL is not set
+# CONFIG_USB_CONFIGFS_ACM is not set
+# CONFIG_USB_CONFIGFS_OBEX is not set
+# CONFIG_USB_CONFIGFS_NCM is not set
+# CONFIG_USB_CONFIGFS_ECM is not set
+# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
+# CONFIG_USB_CONFIGFS_RNDIS is not set
+# CONFIG_USB_CONFIGFS_EEM is not set
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+# CONFIG_USB_CONFIGFS_F_LB_SS is not set
+# CONFIG_USB_CONFIGFS_F_FS is not set
+# CONFIG_USB_CONFIGFS_F_HID is not set
+# CONFIG_USB_CONFIGFS_F_PRINTER is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_ACM_MS is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_LED_TRIG is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS_FLASH is not set
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_BCM6328 is not set
+# CONFIG_LEDS_BCM6358 is not set
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LP5562 is not set
+# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_LP8860 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA963X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_TLC591XX is not set
+# CONFIG_LEDS_LM355x is not set
+# CONFIG_LEDS_IS31FL32XX is not set
+
+#
+# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
+#
+# CONFIG_LEDS_BLINKM is not set
+# CONFIG_LEDS_SYSCON is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_CPU is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
+# CONFIG_LEDS_TRIGGER_CAMERA is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_SYSTOHC=y
+CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_ABB5ZES3 is not set
+# CONFIG_RTC_DRV_ABX80X is not set
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1307_HWMON=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_HYM8563 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_ISL12057 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8523 is not set
+# CONFIG_RTC_DRV_PCF85063 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8010 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+# CONFIG_RTC_DRV_RV8803 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1343 is not set
+# CONFIG_RTC_DRV_DS1347 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RX4581 is not set
+# CONFIG_RTC_DRV_RX6110 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_MCP795 is not set
+CONFIG_RTC_I2C_AND_SPI=y
+
+#
+# SPI and I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_PCF2127 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1685_FAMILY is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS2404 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_ZYNQMP is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SNVS is not set
+CONFIG_RTC_DRV_ASPEED=y
+
+#
+# HID Sensor RTC drivers
+#
+# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_VIRT_DRIVERS is not set
+
+#
+# Virtio drivers
+#
+# CONFIG_VIRTIO_MMIO is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+# CONFIG_STAGING is not set
+# CONFIG_GOLDFISH is not set
+# CONFIG_CHROME_PLATFORMS is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_COMMON_CLK=y
+
+#
+# Common Clock Framework
+#
+# CONFIG_COMMON_CLK_SI5351 is not set
+# CONFIG_COMMON_CLK_SI514 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_CDCE706 is not set
+# CONFIG_COMMON_CLK_CDCE925 is not set
+# CONFIG_COMMON_CLK_CS2000_CP is not set
+# CONFIG_CLK_QORIQ is not set
+# CONFIG_COMMON_CLK_NXP is not set
+# CONFIG_COMMON_CLK_PXA is not set
+
+#
+# Hardware Spinlock drivers
+#
+
+#
+# Clock Source drivers
+#
+CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_PROBE=y
+CONFIG_CLKSRC_MMIO=y
+# CONFIG_ARM_TIMER_SP804 is not set
+# CONFIG_ATMEL_PIT is not set
+# CONFIG_SH_TIMER_CMT is not set
+# CONFIG_SH_TIMER_MTU2 is not set
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_EM_TIMER_STI is not set
+CONFIG_MOXART_TIMER=y
+# CONFIG_MAILBOX is not set
+# CONFIG_IOMMU_SUPPORT is not set
+
+#
+# Remoteproc drivers
+#
+# CONFIG_STE_MODEM_RPROC is not set
+
+#
+# Rpmsg drivers
+#
+
+#
+# SOC (System On Chip) specific Drivers
+#
+# CONFIG_SOC_BRCMSTB is not set
+# CONFIG_SUNXI_SRAM is not set
+# CONFIG_SOC_TI is not set
+# CONFIG_PM_DEVFREQ is not set
+# CONFIG_EXTCON is not set
+# CONFIG_MEMORY is not set
+# CONFIG_IIO is not set
+# CONFIG_PWM is not set
+CONFIG_IRQCHIP=y
+CONFIG_ARM_GIC_MAX_NR=1
+# CONFIG_IPACK_BUS is not set
+# CONFIG_RESET_CONTROLLER is not set
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+# CONFIG_GENERIC_PHY is not set
+# CONFIG_PHY_PXA_28NM_HSIC is not set
+# CONFIG_PHY_PXA_28NM_USB2 is not set
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_POWERCAP is not set
+# CONFIG_MCB is not set
+
+#
+# Performance monitor support
+#
+# CONFIG_RAS is not set
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+CONFIG_NVMEM=y
+# CONFIG_STM is not set
+# CONFIG_INTEL_TH is not set
+
+#
+# FPGA Configuration Support
+#
+# CONFIG_FPGA is not set
+
+#
+# Firmware Drivers
+#
+CONFIG_FIRMWARE_MEMMAP=y
+# CONFIG_FW_CFG_SYSFS is not set
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_F2FS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+CONFIG_FILE_LOCKING=y
+CONFIG_MANDATORY_FILE_LOCKING=y
+# CONFIG_FS_ENCRYPTION is not set
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_OVERLAY_FS=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_PROC_CHILDREN is not set
+CONFIG_KERNFS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ORANGEFS_FS is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_CACHE=y
+# CONFIG_SQUASHFS_FILE_DIRECT is not set
+CONFIG_SQUASHFS_DECOMP_SINGLE=y
+# CONFIG_SQUASHFS_DECOMP_MULTI is not set
+# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
+# CONFIG_SQUASHFS_XATTR is not set
+CONFIG_SQUASHFS_ZLIB=y
+# CONFIG_SQUASHFS_LZ4 is not set
+# CONFIG_SQUASHFS_LZO is not set
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+
+#
+# printk and dmesg options
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_DYNAMIC_DEBUG=y
+
+#
+# Compile-time checks and compiler options
+#
+# CONFIG_DEBUG_INFO is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_READABLE_ASM is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_PAGE_OWNER is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+CONFIG_PAGE_EXTENSION=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_PAGE_POISONING=y
+# CONFIG_PAGE_POISONING_NO_SANITY is not set
+# CONFIG_PAGE_POISONING_ZERO is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
+# CONFIG_DEBUG_KMEMLEAK_TEST is not set
+# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_SHIRQ=y
+
+#
+# Debug Lockups and Hangs
+#
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_WQ_WATCHDOG=y
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHED_STACK_END_CHECK=y
+# CONFIG_DEBUG_TIMEKEEPING is not set
+# CONFIG_TIMER_STATS is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_PI_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+
+#
+# RCU Debugging
+#
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_TORTURE_TEST is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RCU_EQS_DEBUG is not set
+# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_PRINTF is not set
+# CONFIG_TEST_BITMAP is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_UDELAY is not set
+CONFIG_MEMTEST=y
+# CONFIG_TEST_STATIC_KEYS is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_UBSAN=y
+CONFIG_UBSAN_ALIGNMENT=y
+CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
+# CONFIG_STRICT_DEVMEM is not set
+# CONFIG_ARM_PTDUMP is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_SEMIHOSTING is not set
+CONFIG_DEBUG_LL_UART_8250=y
+# CONFIG_DEBUG_LL_UART_PL01X is not set
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_UART_8250=y
+CONFIG_DEBUG_UART_PHYS=0x1e784000
+CONFIG_DEBUG_UART_VIRT=0xe8784000
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UNCOMPRESS=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_EARLY_PRINTK=y
+# CONFIG_PID_IN_CONTEXTIDR is not set
+CONFIG_DEBUG_SET_MODULE_RONX=y
+# CONFIG_CORESIGHT is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_AKCIPHER2=y
+# CONFIG_CRYPTO_RSA is not set
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_USER is not set
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_MCRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_ECHAINIV=y
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_KEYWRAP is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_CMAC is not set
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRC32 is not set
+# CONFIG_CRYPTO_CRCT10DIF is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_POLY1305 is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+CONFIG_CRYPTO_SHA256=y
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_CHACHA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_842 is not set
+# CONFIG_CRYPTO_LZ4 is not set
+# CONFIG_CRYPTO_LZ4HC is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+# CONFIG_CRYPTO_DRBG_HASH is not set
+# CONFIG_CRYPTO_DRBG_CTR is not set
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_USER_API_RNG is not set
+# CONFIG_CRYPTO_USER_API_AEAD is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Certificates for signature checking
+#
+# CONFIG_ARM_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_CRC8 is not set
+# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
+# CONFIG_RANDOM32_SELFTEST is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+# CONFIG_XZ_DEC_SPARC is not set
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAS_DMA=y
+CONFIG_DQL=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+# CONFIG_CORDIC is not set
+# CONFIG_DDR is not set
+# CONFIG_IRQ_POLL is not set
+CONFIG_LIBFDT=y
+# CONFIG_SG_SPLIT is not set
+CONFIG_ARCH_HAS_SG_CHAIN=y
+# CONFIG_VIRTUALIZATION is not set
--
2.1.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [dev-4.7 patch 5/5] arch/arm: introduce support for Mallanox evb aspeed 2500 config and dts flavors
2016-08-10 7:03 [dev-4.7 patch 5/5] arch/arm: introduce support for Mallanox evb aspeed 2500 config and dts flavors vadimp
@ 2016-08-17 5:13 ` Joel Stanley
2016-08-17 5:31 ` Vadim Pasternak
0 siblings, 1 reply; 7+ messages in thread
From: Joel Stanley @ 2016-08-17 5:13 UTC (permalink / raw)
To: Vadim Pasternak; +Cc: OpenBMC Maillist, jiri, michaelsh
On Wed, Aug 10, 2016 at 4:33 PM, <vadimp@mellanox.com> wrote:
> From: Vadim Pasternak <vadimp@mellanox.com>
>
> Add kernel configuration and dts files.
>
> Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
> ---
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi | 32 +
> arch/arm/boot/dts/aspeed-g5-mlx.dtsi | 429 +++
> arch/arm/boot/dts/mlx-ast2500-bmc.dts | 109 +
> arch/arm/configs/mlx_bmc_defconfig | 2786 ++++++++++++++++++++
> 5 files changed, 3358 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi
> create mode 100644 arch/arm/boot/dts/aspeed-g5-mlx.dtsi
> create mode 100644 arch/arm/boot/dts/mlx-ast2500-bmc.dts
> create mode 100644 arch/arm/configs/mlx_bmc_defconfig
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 048fbb5..2e364e6 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -895,7 +895,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
> aspeed-bmc-opp-firestone.dtb \
> aspeed-bmc-opp-garrison.dtb \
> aspeed-bmc-opp-witherspoon.dtb \
> - aspeed-ast2500-evb.dtb
> + aspeed-ast2500-evb.dtb \
> + mlx-ast2500-bmc.dtb
> endif
>
> dtstree := $(srctree)/$(src)
> diff --git a/arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi b/arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi
> new file mode 100644
> index 0000000..1c5ae2b
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi
> @@ -0,0 +1,32 @@
> +/* This file is the label for the bmc primary flash and its partitions */
> + label = "bmc";
> + #address-cells = < 1 >;
> + #size-cells = < 1 >;
> + u-boot {
> + reg = < 0 0x60000 >;
> + label = "u-boot";
> + };
> + u-boot-env {
> + reg = < 0x60000 0x30000 >;
> + label = "u-boot-env";
> + };
> + kernel {
> + reg = < 0x90000 0x27e000 >;
> + label = "kernel";
> + };
> + dtb {
> + reg = < 0x30e000 0x2000 >;
> + label = "dtb";
> + };
> + initramfs {
> + reg = < 0x310000 0x1c0000 >;
> + label = "initramfs";
> + };
> + rofs {
> + reg = < 0x4d0000 0x1740000 >;
> + label = "rofs";
> + };
> + rwfs {
> + reg = < 0x1c10000 0x3f0000 >;
> + label = "rwfs";
> + };
This looks like a copy of the existing layout. You don't need to
create your own.
> diff --git a/arch/arm/boot/dts/aspeed-g5-mlx.dtsi b/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
> new file mode 100644
> index 0000000..0f4cce9
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
> @@ -0,0 +1,429 @@
> +#include "skeleton.dtsi"
> +
> +/ {
> + model = "Aspeed BMC";
> + compatible = "aspeed,ast2500";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&vic>;
> +
This looks to be a copy of the existing aspeed-g5.dtsi. You should
include that in your .dts file instead of duplicating it.
> diff --git a/arch/arm/boot/dts/mlx-ast2500-bmc.dts b/arch/arm/boot/dts/mlx-ast2500-bmc.dts
> new file mode 100644
> index 0000000..0817a67
> --- /dev/null
> +++ b/arch/arm/boot/dts/mlx-ast2500-bmc.dts
> @@ -0,0 +1,109 @@
> +/dts-v1/;
> +
> +#include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include "aspeed-g5-mlx.dtsi"
> +
> +/ {
> + model = "AST2500 EVB";
If this is the ast2500 evb, you do not need to copy the dts - you can
use the existing one.
However this looks to be different. In that case, make the model name
be that of the system.
> + compatible = "mellanox,mlx-bmc", "aspeed,ast2500-evb", "aspeed,ast2500";
Drop the ast2500-evb compat string.
> +
> + aliases {
> + serial4 = &uart5;
> + };
> +
> + aliases {
> + serial0 = &uart5;
> + };
You can combine these two:
aliases {
serial0 = &uart5;
serial4 = &uart5;
};
However this highlights that you're creating two aliases for the same
uart. I doubt this was your intention.
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200n8";
> + };
> +
> + memory {
> + reg = <0x80000000 0x20000000>;
> + };
>
> diff --git a/arch/arm/configs/mlx_bmc_defconfig b/arch/arm/configs/mlx_bmc_defconfig
> new file mode 100644
> index 0000000..b381dc5
> --- /dev/null
> +++ b/arch/arm/configs/mlx_bmc_defconfig
Upstream do not like adding many defconfigs. We have one for the
ast2500 and one for the ast2400 series. I suggest adding options to
the aspeed_g5_defconfig.
> @@ -0,0 +1,2786 @@
> +#
> +# Automatically generated file; DO NOT EDIT.
> +# Linux/arm 4.6.4 Kernel Configuration
This needs to be against the dev-4.7 branch.
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [dev-4.7 patch 5/5] arch/arm: introduce support for Mallanox evb aspeed 2500 config and dts flavors
2016-08-17 5:13 ` Joel Stanley
@ 2016-08-17 5:31 ` Vadim Pasternak
2016-08-17 5:49 ` Joel Stanley
0 siblings, 1 reply; 7+ messages in thread
From: Vadim Pasternak @ 2016-08-17 5:31 UTC (permalink / raw)
To: Joel Stanley; +Cc: OpenBMC Maillist, Jiri Pirko, Michael Shych
> -----Original Message-----
> From: joel.stan@gmail.com [mailto:joel.stan@gmail.com] On Behalf Of Joel
> Stanley
> Sent: Wednesday, August 17, 2016 8:14 AM
> To: Vadim Pasternak <vadimp@mellanox.com>
> Cc: OpenBMC Maillist <openbmc@lists.ozlabs.org>; Jiri Pirko
> <jiri@mellanox.com>; Michael Shych <michaelsh@mellanox.com>
> Subject: Re: [dev-4.7 patch 5/5] arch/arm: introduce support for Mallanox evb
> aspeed 2500 config and dts flavors
>
> On Wed, Aug 10, 2016 at 4:33 PM, <vadimp@mellanox.com> wrote:
> > From: Vadim Pasternak <vadimp@mellanox.com>
> >
> > Add kernel configuration and dts files.
> >
> > Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
> > ---
> > arch/arm/boot/dts/Makefile | 3 +-
> > arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi | 32 +
> > arch/arm/boot/dts/aspeed-g5-mlx.dtsi | 429 +++
> > arch/arm/boot/dts/mlx-ast2500-bmc.dts | 109 +
> > arch/arm/configs/mlx_bmc_defconfig | 2786
> ++++++++++++++++++++
> > 5 files changed, 3358 insertions(+), 1 deletion(-) create mode
> > 100644 arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi
> > create mode 100644 arch/arm/boot/dts/aspeed-g5-mlx.dtsi
> > create mode 100644 arch/arm/boot/dts/mlx-ast2500-bmc.dts
> > create mode 100644 arch/arm/configs/mlx_bmc_defconfig
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 048fbb5..2e364e6 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -895,7 +895,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-
> palmetto.dtb \
> > aspeed-bmc-opp-firestone.dtb \
> > aspeed-bmc-opp-garrison.dtb \
> > aspeed-bmc-opp-witherspoon.dtb \
> > - aspeed-ast2500-evb.dtb
> > + aspeed-ast2500-evb.dtb \
> > + mlx-ast2500-bmc.dtb
> > endif
> >
> > dtstree := $(srctree)/$(src)
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi
> > b/arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi
> > new file mode 100644
> > index 0000000..1c5ae2b
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/aspeed-bmc-mlx-flash-layout.dtsi
> > @@ -0,0 +1,32 @@
> > +/* This file is the label for the bmc primary flash and its partitions */
> > + label = "bmc";
> > + #address-cells = < 1 >;
> > + #size-cells = < 1 >;
> > + u-boot {
> > + reg = < 0 0x60000 >;
> > + label = "u-boot";
> > + };
> > + u-boot-env {
> > + reg = < 0x60000 0x30000 >;
> > + label = "u-boot-env";
> > + };
> > + kernel {
> > + reg = < 0x90000 0x27e000 >;
> > + label = "kernel";
> > + };
> > + dtb {
> > + reg = < 0x30e000 0x2000 >;
> > + label = "dtb";
> > + };
> > + initramfs {
> > + reg = < 0x310000 0x1c0000 >;
> > + label = "initramfs";
> > + };
> > + rofs {
> > + reg = < 0x4d0000 0x1740000 >;
> > + label = "rofs";
> > + };
> > + rwfs {
> > + reg = < 0x1c10000 0x3f0000 >;
> > + label = "rwfs";
> > + };
>
> This looks like a copy of the existing layout. You don't need to create your own.
>
> > diff --git a/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
> > b/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
> > new file mode 100644
> > index 0000000..0f4cce9
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
> > @@ -0,0 +1,429 @@
> > +#include "skeleton.dtsi"
> > +
> > +/ {
> > + model = "Aspeed BMC";
> > + compatible = "aspeed,ast2500";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + interrupt-parent = <&vic>;
> > +
>
> This looks to be a copy of the existing aspeed-g5.dtsi. You should include that in
> your .dts file instead of duplicating it.
We have in this file peci, jtag, pwm and we are adding now usb.
We also wanted to change interrupt level sensitivity to LEVEL_HIGH.
Currently, using aspeed-g5 we are getting all interrupts as edge. According to datasheet most should be level. Possibly this is a reason of I2C failure (which we experienced also with 4.7).
>
> > diff --git a/arch/arm/boot/dts/mlx-ast2500-bmc.dts
> > b/arch/arm/boot/dts/mlx-ast2500-bmc.dts
> > new file mode 100644
> > index 0000000..0817a67
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/mlx-ast2500-bmc.dts
> > @@ -0,0 +1,109 @@
> > +/dts-v1/;
> > +
> > +#include <dt-bindings/thermal/thermal.h> #include
> > +<dt-bindings/pwm/pwm.h> #include "aspeed-g5-mlx.dtsi"
> > +
> > +/ {
> > + model = "AST2500 EVB";
>
> If this is the ast2500 evb, you do not need to copy the dts - you can use the
> existing one.
>
> However this looks to be different. In that case, make the model name be that
> of the system.
>
> > + compatible = "mellanox,mlx-bmc", "aspeed,ast2500-evb",
> > + "aspeed,ast2500";
>
> Drop the ast2500-evb compat string.
>
> > +
> > + aliases {
> > + serial4 = &uart5;
> > + };
> > +
> > + aliases {
> > + serial0 = &uart5;
> > + };
>
> You can combine these two:
>
>
> aliases {
> serial0 = &uart5;
> serial4 = &uart5;
> };
>
> However this highlights that you're creating two aliases for the same uart. I
> doubt this was your intention.
>
> > +
> > + chosen {
> > + stdout-path = &uart5;
> > + bootargs = "console=ttyS4,115200n8";
> > + };
> > +
> > + memory {
> > + reg = <0x80000000 0x20000000>;
> > + };
> >
>
> > diff --git a/arch/arm/configs/mlx_bmc_defconfig
> > b/arch/arm/configs/mlx_bmc_defconfig
> > new file mode 100644
> > index 0000000..b381dc5
> > --- /dev/null
> > +++ b/arch/arm/configs/mlx_bmc_defconfig
>
> Upstream do not like adding many defconfigs. We have one for the
> ast2500 and one for the ast2400 series. I suggest adding options to the
> aspeed_g5_defconfig.
We have a big gap between aspeed_g5_defconfig and our flavor of that (LED, SWITCHDEV). Also we would like to get rid of using JFFS2 and move to UBI.
Would it be possible to add all that to aspeed_g5_defconfig?
By the way, I see that in 4.7 upstream you already added some minimal stuff for Aspeed SoC.
Do you have some plan regarding upstream other stuff to kernel?
When you think it could happen?
And are you going to submit upstream all Aspeed files together or you are planning to do it in some particular order?
>
> > @@ -0,0 +1,2786 @@
> > +#
> > +# Automatically generated file; DO NOT EDIT.
> > +# Linux/arm 4.6.4 Kernel Configuration
>
> This needs to be against the dev-4.7 branch.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dev-4.7 patch 5/5] arch/arm: introduce support for Mallanox evb aspeed 2500 config and dts flavors
2016-08-17 5:31 ` Vadim Pasternak
@ 2016-08-17 5:49 ` Joel Stanley
2016-08-17 6:06 ` Vadim Pasternak
0 siblings, 1 reply; 7+ messages in thread
From: Joel Stanley @ 2016-08-17 5:49 UTC (permalink / raw)
To: Vadim Pasternak; +Cc: OpenBMC Maillist, Jiri Pirko, Michael Shych
On Wed, Aug 17, 2016 at 3:01 PM, Vadim Pasternak <vadimp@mellanox.com> wrote:
>> > diff --git a/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
>> > b/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
>> > new file mode 100644
>> > index 0000000..0f4cce9
>> > --- /dev/null
>> > +++ b/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
>> > @@ -0,0 +1,429 @@
>> > +#include "skeleton.dtsi"
>> > +
>> > +/ {
>> > + model = "Aspeed BMC";
>> > + compatible = "aspeed,ast2500";
>> > + #address-cells = <1>;
>> > + #size-cells = <1>;
>> > + interrupt-parent = <&vic>;
>> > +
>>
>> This looks to be a copy of the existing aspeed-g5.dtsi. You should include that in
>> your .dts file instead of duplicating it.
>
> We have in this file peci, jtag, pwm and we are adding now usb.
You can add these devices to the aspeed-g5.dtsi and set them to
disabled so the other systems ignore the extra devices.
You can then set them to enabled with status = "okay" in your .dts as
you have done with i2c, etc.
> We also wanted to change interrupt level sensitivity to LEVEL_HIGH.
> Currently, using aspeed-g5 we are getting all interrupts as edge. According to datasheet most should be level. Possibly this is a reason of I2C failure (which we experienced also with 4.7).
IIRC the irq driver doesn't have support for specifying the interrupt
as edge or level. This is an enhancement that needs to be made to the
driver before you can specify it in the device tree.
>> > diff --git a/arch/arm/configs/mlx_bmc_defconfig
>> > b/arch/arm/configs/mlx_bmc_defconfig
>> > new file mode 100644
>> > index 0000000..b381dc5
>> > --- /dev/null
>> > +++ b/arch/arm/configs/mlx_bmc_defconfig
>>
>> Upstream do not like adding many defconfigs. We have one for the
>> ast2500 and one for the ast2400 series. I suggest adding options to the
>> aspeed_g5_defconfig.
>
> We have a big gap between aspeed_g5_defconfig and our flavor of that (LED, SWITCHDEV). Also we would like to get rid of using JFFS2 and move to UBI.
> Would it be possible to add all that to aspeed_g5_defconfig?
There are two ways you can configure the kernel. One is to have the
defconfig in the kernel tree that is a superset of the requirements
for all systems.
The other is to have a kernel configuration specific to your board in
the yocto tree. This option allows everyone to build a smaller kernel
that meets the needs of their BMC. This is the option that the
existing boards currently support.
No matter which option you chose, I suggest sending a patch to
aspeed_g5_defconfig that enables all of the the functionality you use.
This way I can test that it builds correctly when modifying the
kernel.
> By the way, I see that in 4.7 upstream you already added some minimal stuff for Aspeed SoC.
> Do you have some plan regarding upstream other stuff to kernel?
Yes. I intend to merge all of the drivers upstream.
> When you think it could happen?
We have watchdog and irq controller in 4.8.
4.9 will have clocksource, gpio and pinmux.
Brendan is working on i2c which I hope will be ready in time for
inclusion in 4.9.
We also have bt, clock, mtd and vuart drivers that need review and
submission. I hope to get as many as possible into 4.9.
> And are you going to submit upstream all Aspeed files together or you are planning to do it in some particular order?
As each of the drivers are going to different maintainers, they do not
have any dependency on each other. They can go up when they are ready.
Cheers,
Joel
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [dev-4.7 patch 5/5] arch/arm: introduce support for Mallanox evb aspeed 2500 config and dts flavors
2016-08-17 5:49 ` Joel Stanley
@ 2016-08-17 6:06 ` Vadim Pasternak
2016-08-17 6:22 ` Joel Stanley
0 siblings, 1 reply; 7+ messages in thread
From: Vadim Pasternak @ 2016-08-17 6:06 UTC (permalink / raw)
To: Joel Stanley; +Cc: OpenBMC Maillist, Jiri Pirko, Michael Shych
> -----Original Message-----
> From: joel.stan@gmail.com [mailto:joel.stan@gmail.com] On Behalf Of Joel
> Stanley
> Sent: Wednesday, August 17, 2016 8:49 AM
> To: Vadim Pasternak <vadimp@mellanox.com>
> Cc: OpenBMC Maillist <openbmc@lists.ozlabs.org>; Jiri Pirko
> <jiri@mellanox.com>; Michael Shych <michaelsh@mellanox.com>
> Subject: Re: [dev-4.7 patch 5/5] arch/arm: introduce support for Mallanox evb
> aspeed 2500 config and dts flavors
>
> On Wed, Aug 17, 2016 at 3:01 PM, Vadim Pasternak <vadimp@mellanox.com>
> wrote:
> >> > diff --git a/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
> >> > b/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
> >> > new file mode 100644
> >> > index 0000000..0f4cce9
> >> > --- /dev/null
> >> > +++ b/arch/arm/boot/dts/aspeed-g5-mlx.dtsi
> >> > @@ -0,0 +1,429 @@
> >> > +#include "skeleton.dtsi"
> >> > +
> >> > +/ {
> >> > + model = "Aspeed BMC";
> >> > + compatible = "aspeed,ast2500";
> >> > + #address-cells = <1>;
> >> > + #size-cells = <1>;
> >> > + interrupt-parent = <&vic>;
> >> > +
> >>
> >> This looks to be a copy of the existing aspeed-g5.dtsi. You should
> >> include that in your .dts file instead of duplicating it.
> >
> > We have in this file peci, jtag, pwm and we are adding now usb.
>
> You can add these devices to the aspeed-g5.dtsi and set them to disabled so the
> other systems ignore the extra devices.
>
> You can then set them to enabled with status = "okay" in your .dts as you have
> done with i2c, etc.
>
> > We also wanted to change interrupt level sensitivity to LEVEL_HIGH.
> > Currently, using aspeed-g5 we are getting all interrupts as edge. According to
> datasheet most should be level. Possibly this is a reason of I2C failure (which we
> experienced also with 4.7).
>
> IIRC the irq driver doesn't have support for specifying the interrupt as edge or
> level. This is an enhancement that needs to be made to the driver before you
> can specify it in the device tree.
>
> >> > diff --git a/arch/arm/configs/mlx_bmc_defconfig
> >> > b/arch/arm/configs/mlx_bmc_defconfig
> >> > new file mode 100644
> >> > index 0000000..b381dc5
> >> > --- /dev/null
> >> > +++ b/arch/arm/configs/mlx_bmc_defconfig
> >>
> >> Upstream do not like adding many defconfigs. We have one for the
> >> ast2500 and one for the ast2400 series. I suggest adding options to
> >> the aspeed_g5_defconfig.
> >
> > We have a big gap between aspeed_g5_defconfig and our flavor of that (LED,
> SWITCHDEV). Also we would like to get rid of using JFFS2 and move to UBI.
> > Would it be possible to add all that to aspeed_g5_defconfig?
>
> There are two ways you can configure the kernel. One is to have the defconfig in
> the kernel tree that is a superset of the requirements for all systems.
>
> The other is to have a kernel configuration specific to your board in the yocto
> tree. This option allows everyone to build a smaller kernel that meets the needs
> of their BMC. This is the option that the existing boards currently support.
>
> No matter which option you chose, I suggest sending a patch to
> aspeed_g5_defconfig that enables all of the the functionality you use.
> This way I can test that it builds correctly when modifying the kernel.
>
> > By the way, I see that in 4.7 upstream you already added some minimal stuff
> for Aspeed SoC.
> > Do you have some plan regarding upstream other stuff to kernel?
>
> Yes. I intend to merge all of the drivers upstream.
>
> > When you think it could happen?
>
> We have watchdog and irq controller in 4.8.
>
> 4.9 will have clocksource, gpio and pinmux.
>
> Brendan is working on i2c which I hope will be ready in time for inclusion in 4.9.
>
> We also have bt, clock, mtd and vuart drivers that need review and submission. I
> hope to get as many as possible into 4.9.
>
> > And are you going to submit upstream all Aspeed files together or you are
> planning to do it in some particular order?
>
> As each of the drivers are going to different maintainers, they do not have any
> dependency on each other. They can go up when they are ready.
>
Great,
Thank you very much for your detailed answers.
I'll re-work the patches according to your comment and re-submit them.
As I understand you don't need peci, jtag, pwm, usb at the moment.
Could we submit these module for upstream review after your approval by ourselves?
What about RTC and SPI stuff?
> Cheers,
>
> Joel
Cheers,
Vadim.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dev-4.7 patch 5/5] arch/arm: introduce support for Mallanox evb aspeed 2500 config and dts flavors
2016-08-17 6:06 ` Vadim Pasternak
@ 2016-08-17 6:22 ` Joel Stanley
2016-08-22 22:53 ` Rick Altherr
0 siblings, 1 reply; 7+ messages in thread
From: Joel Stanley @ 2016-08-17 6:22 UTC (permalink / raw)
To: Vadim Pasternak; +Cc: OpenBMC Maillist, Jiri Pirko, Michael Shych
On Wed, Aug 17, 2016 at 3:36 PM, Vadim Pasternak <vadimp@mellanox.com> wrote:
>> > By the way, I see that in 4.7 upstream you already added some minimal stuff
>> for Aspeed SoC.
>> > Do you have some plan regarding upstream other stuff to kernel?
>>
>> Yes. I intend to merge all of the drivers upstream.
>>
>> > When you think it could happen?
>>
>> We have watchdog and irq controller in 4.8.
>>
>> 4.9 will have clocksource, gpio and pinmux.
>>
>> Brendan is working on i2c which I hope will be ready in time for inclusion in 4.9.
>>
>> We also have bt, clock, mtd and vuart drivers that need review and submission. I
>> hope to get as many as possible into 4.9.
>>
>> > And are you going to submit upstream all Aspeed files together or you are
>> planning to do it in some particular order?
>>
>> As each of the drivers are going to different maintainers, they do not have any
>> dependency on each other. They can go up when they are ready.
>>
>
> Great,
> Thank you very much for your detailed answers.
> I'll re-work the patches according to your comment and re-submit them.
>
> As I understand you don't need peci, jtag, pwm, usb at the moment.
> Could we submit these module for upstream review after your approval by ourselves?
Yeah, I think that would work best.
> What about RTC and SPI stuff?
The SPI driver (I called it a MTD driver, another name is a spi-nor
driver) is being worked on by Milton. I hope he is able to send it
upstream for 4.9.
I forgot about the rtc driver. I wrote that over a year ago; it can go
upstream in 4.9 as well.
Cheers,
Joel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dev-4.7 patch 5/5] arch/arm: introduce support for Mallanox evb aspeed 2500 config and dts flavors
2016-08-17 6:22 ` Joel Stanley
@ 2016-08-22 22:53 ` Rick Altherr
0 siblings, 0 replies; 7+ messages in thread
From: Rick Altherr @ 2016-08-22 22:53 UTC (permalink / raw)
To: Joel Stanley; +Cc: Vadim Pasternak, OpenBMC Maillist, Michael Shych, Jiri Pirko
[-- Attachment #1: Type: text/plain, Size: 1933 bytes --]
I believe Xo is working on lpc as well.
On Tue, Aug 16, 2016 at 11:22 PM, Joel Stanley <joel@jms.id.au> wrote:
> On Wed, Aug 17, 2016 at 3:36 PM, Vadim Pasternak <vadimp@mellanox.com>
> wrote:
> >> > By the way, I see that in 4.7 upstream you already added some minimal
> stuff
> >> for Aspeed SoC.
> >> > Do you have some plan regarding upstream other stuff to kernel?
> >>
> >> Yes. I intend to merge all of the drivers upstream.
> >>
> >> > When you think it could happen?
> >>
> >> We have watchdog and irq controller in 4.8.
> >>
> >> 4.9 will have clocksource, gpio and pinmux.
> >>
> >> Brendan is working on i2c which I hope will be ready in time for
> inclusion in 4.9.
> >>
> >> We also have bt, clock, mtd and vuart drivers that need review and
> submission. I
> >> hope to get as many as possible into 4.9.
> >>
> >> > And are you going to submit upstream all Aspeed files together or you
> are
> >> planning to do it in some particular order?
> >>
> >> As each of the drivers are going to different maintainers, they do not
> have any
> >> dependency on each other. They can go up when they are ready.
> >>
> >
> > Great,
> > Thank you very much for your detailed answers.
> > I'll re-work the patches according to your comment and re-submit them.
> >
> > As I understand you don't need peci, jtag, pwm, usb at the moment.
> > Could we submit these module for upstream review after your approval by
> ourselves?
>
> Yeah, I think that would work best.
>
> > What about RTC and SPI stuff?
>
> The SPI driver (I called it a MTD driver, another name is a spi-nor
> driver) is being worked on by Milton. I hope he is able to send it
> upstream for 4.9.
>
> I forgot about the rtc driver. I wrote that over a year ago; it can go
> upstream in 4.9 as well.
>
> Cheers,
>
> Joel
> _______________________________________________
> openbmc mailing list
> openbmc@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/openbmc
>
[-- Attachment #2: Type: text/html, Size: 2828 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-08-22 22:53 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-10 7:03 [dev-4.7 patch 5/5] arch/arm: introduce support for Mallanox evb aspeed 2500 config and dts flavors vadimp
2016-08-17 5:13 ` Joel Stanley
2016-08-17 5:31 ` Vadim Pasternak
2016-08-17 5:49 ` Joel Stanley
2016-08-17 6:06 ` Vadim Pasternak
2016-08-17 6:22 ` Joel Stanley
2016-08-22 22:53 ` Rick Altherr
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.