From: Joy Zou <joy.zou@nxp.com> To: Vinod Koul <vkoul@kernel.org> Cc: "S.J. Wang" <shengjiu.wang@nxp.com>, "shawnguo@kernel.org" <shawnguo@kernel.org>, "s.hauer@pengutronix.de" <s.hauer@pengutronix.de>, "kernel@pengutronix.de" <kernel@pengutronix.de>, "festevam@gmail.com" <festevam@gmail.com>, dl-linux-imx <linux-imx@nxp.com>, "dmaengine@vger.kernel.org" <dmaengine@vger.kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org> Subject: RE: [EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio Date: Tue, 24 May 2022 07:56:22 +0000 [thread overview] Message-ID: <AM6PR04MB592593CB38B5B391440478A3E1D79@AM6PR04MB5925.eurprd04.prod.outlook.com> (raw) In-Reply-To: <YXY2M0td08eDCi+9@matsya> > -----Original Message----- > From: Vinod Koul <vkoul@kernel.org> > Sent: 2021年10月25日 12:45 > To: Joy Zou <joy.zou@nxp.com> > Cc: Robin Gong <yibin.gong@nxp.com>; shawnguo@kernel.org; > s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com; > dl-linux-imx <linux-imx@nxp.com>; dmaengine@vger.kernel.org; > linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org > Subject: [EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio > > > On 21-10-21, 13:16, Joy Zou wrote: > > Add hdmi audio support in sdma. > > Pls send a series together and chained. They appear here as disjoint patches > The audio and dma patches always are separate. The audio driver owner can send audio patches after the dma patches are accepted. > > > > Signed-off-by: Joy Zou <joy.zou@nxp.com> > > --- > > drivers/dma/imx-sdma.c | 38 > +++++++++++++++++++++------ > > include/linux/platform_data/dma-imx.h | 1 + > > 2 files changed, 31 insertions(+), 8 deletions(-) > > > > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index > > cacc725ca545..3a0e408f7741 100644 > > --- a/drivers/dma/imx-sdma.c > > +++ b/drivers/dma/imx-sdma.c > > @@ -907,7 +907,10 @@ static irqreturn_t sdma_int_handler(int irq, void > *dev_id) > > desc = sdmac->desc; > > if (desc) { > > if (sdmac->flags & IMX_DMA_SG_LOOP) { > > - sdma_update_channel_loop(sdmac); > > + if (sdmac->peripheral_type != > IMX_DMATYPE_HDMI) > > + > sdma_update_channel_loop(sdmac); > > + else > > + > > + vchan_cyclic_callback(&desc->vd); > > } else { > > > mxc_sdma_handle_channel_normal(sdmac); > > vchan_cookie_complete(&desc->vd); > @@ > > -1023,6 +1026,10 @@ static void sdma_get_pc(struct sdma_channel > *sdmac, > > case IMX_DMATYPE_IPU_MEMORY: > > emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr; > > break; > > + case IMX_DMATYPE_HDMI: > > + emi_2_per = sdma->script_addrs->hdmi_dma_addr; > > + sdmac->is_ram_script = true; > > + break; > > default: > > break; > > } > > @@ -1070,11 +1077,16 @@ static int sdma_load_context(struct > sdma_channel *sdmac) > > /* Send by context the event mask,base address for peripheral > > * and watermark level > > */ > > - context->gReg[0] = sdmac->event_mask[1]; > > - context->gReg[1] = sdmac->event_mask[0]; > > - context->gReg[2] = sdmac->per_addr; > > - context->gReg[6] = sdmac->shp_addr; > > - context->gReg[7] = sdmac->watermark_level; > > + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { > > + context->gReg[4] = sdmac->per_addr; > > + context->gReg[6] = sdmac->shp_addr; > > + } else { > > + context->gReg[0] = sdmac->event_mask[1]; > > + context->gReg[1] = sdmac->event_mask[0]; > > + context->gReg[2] = sdmac->per_addr; > > + context->gReg[6] = sdmac->shp_addr; > > + context->gReg[7] = sdmac->watermark_level; > > + } > > > > bd0->mode.command = C0_SETDM; > > bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD; @@ -1420,7 > > +1432,7 @@ static struct sdma_desc *sdma_transfer_init(struct > sdma_channel *sdmac, > > desc->sdmac = sdmac; > > desc->num_bd = bds; > > > > - if (sdma_alloc_bd(desc)) > > + if (bds && sdma_alloc_bd(desc)) > > goto err_desc_out; > > > > /* No slave_config called in MEMCPY case, so do here */ @@ > > -1585,13 +1597,16 @@ static struct dma_async_tx_descriptor > > *sdma_prep_dma_cyclic( { > > struct sdma_channel *sdmac = to_sdma_chan(chan); > > struct sdma_engine *sdma = sdmac->sdma; > > - int num_periods = buf_len / period_len; > > + int num_periods = 0; > > int channel = sdmac->channel; > > int i = 0, buf = 0; > > struct sdma_desc *desc; > > > > dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel); > > > > + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI) > > + num_periods = buf_len / period_len; > > + > > sdma_config_write(chan, &sdmac->slave_config, direction); > > > > desc = sdma_transfer_init(sdmac, direction, num_periods); @@ > > -1608,6 +1623,9 @@ static struct dma_async_tx_descriptor > *sdma_prep_dma_cyclic( > > goto err_bd_out; > > } > > > > + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) > > + return vchan_tx_prep(&sdmac->vc, &desc->vd, flags); > > + > > while (buf < buf_len) { > > struct sdma_buffer_descriptor *bd = &desc->bd[i]; > > int param; > > @@ -1668,6 +1686,10 @@ static int sdma_config_write(struct dma_chan > *chan, > > sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst > << 16) & > > SDMA_WATERMARK_LEVEL_HWML; > > sdmac->word_size = dmaengine_cfg->dst_addr_width; > > + } else if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { > > + sdmac->per_address = dmaengine_cfg->dst_addr; > > + sdmac->per_address2 = dmaengine_cfg->src_addr; > > + sdmac->watermark_level = 0; > > } else { > > sdmac->per_address = dmaengine_cfg->dst_addr; > > sdmac->watermark_level = dmaengine_cfg->dst_maxburst * > > You missed adding cyclic capability, pls add that The design of hdmi script achieves the cyclic capability and is different from common script. > > > diff --git a/include/linux/platform_data/dma-imx.h > > b/include/linux/platform_data/dma-imx.h > > index 281adbb26e6b..29ac21d40f28 100644 > > --- a/include/linux/platform_data/dma-imx.h > > +++ b/include/linux/platform_data/dma-imx.h > > @@ -39,6 +39,7 @@ enum sdma_peripheral_type { > > IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ > > IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ > > IMX_DMATYPE_SAI, /* SAI */ > > + IMX_DMATYPE_HDMI, /* HDMI Audio */ > > Why is this in latform_data, these should be moved to include/dt-bindings I will fix it in patch v2. > > -- > ~Vinod
WARNING: multiple messages have this Message-ID (diff)
From: Joy Zou <joy.zou@nxp.com> To: Vinod Koul <vkoul@kernel.org> Cc: "S.J. Wang" <shengjiu.wang@nxp.com>, "shawnguo@kernel.org" <shawnguo@kernel.org>, "s.hauer@pengutronix.de" <s.hauer@pengutronix.de>, "kernel@pengutronix.de" <kernel@pengutronix.de>, "festevam@gmail.com" <festevam@gmail.com>, dl-linux-imx <linux-imx@nxp.com>, "dmaengine@vger.kernel.org" <dmaengine@vger.kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org> Subject: RE: [EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio Date: Tue, 24 May 2022 07:56:22 +0000 [thread overview] Message-ID: <AM6PR04MB592593CB38B5B391440478A3E1D79@AM6PR04MB5925.eurprd04.prod.outlook.com> (raw) In-Reply-To: <YXY2M0td08eDCi+9@matsya> > -----Original Message----- > From: Vinod Koul <vkoul@kernel.org> > Sent: 2021年10月25日 12:45 > To: Joy Zou <joy.zou@nxp.com> > Cc: Robin Gong <yibin.gong@nxp.com>; shawnguo@kernel.org; > s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com; > dl-linux-imx <linux-imx@nxp.com>; dmaengine@vger.kernel.org; > linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org > Subject: [EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio > > > On 21-10-21, 13:16, Joy Zou wrote: > > Add hdmi audio support in sdma. > > Pls send a series together and chained. They appear here as disjoint patches > The audio and dma patches always are separate. The audio driver owner can send audio patches after the dma patches are accepted. > > > > Signed-off-by: Joy Zou <joy.zou@nxp.com> > > --- > > drivers/dma/imx-sdma.c | 38 > +++++++++++++++++++++------ > > include/linux/platform_data/dma-imx.h | 1 + > > 2 files changed, 31 insertions(+), 8 deletions(-) > > > > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index > > cacc725ca545..3a0e408f7741 100644 > > --- a/drivers/dma/imx-sdma.c > > +++ b/drivers/dma/imx-sdma.c > > @@ -907,7 +907,10 @@ static irqreturn_t sdma_int_handler(int irq, void > *dev_id) > > desc = sdmac->desc; > > if (desc) { > > if (sdmac->flags & IMX_DMA_SG_LOOP) { > > - sdma_update_channel_loop(sdmac); > > + if (sdmac->peripheral_type != > IMX_DMATYPE_HDMI) > > + > sdma_update_channel_loop(sdmac); > > + else > > + > > + vchan_cyclic_callback(&desc->vd); > > } else { > > > mxc_sdma_handle_channel_normal(sdmac); > > vchan_cookie_complete(&desc->vd); > @@ > > -1023,6 +1026,10 @@ static void sdma_get_pc(struct sdma_channel > *sdmac, > > case IMX_DMATYPE_IPU_MEMORY: > > emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr; > > break; > > + case IMX_DMATYPE_HDMI: > > + emi_2_per = sdma->script_addrs->hdmi_dma_addr; > > + sdmac->is_ram_script = true; > > + break; > > default: > > break; > > } > > @@ -1070,11 +1077,16 @@ static int sdma_load_context(struct > sdma_channel *sdmac) > > /* Send by context the event mask,base address for peripheral > > * and watermark level > > */ > > - context->gReg[0] = sdmac->event_mask[1]; > > - context->gReg[1] = sdmac->event_mask[0]; > > - context->gReg[2] = sdmac->per_addr; > > - context->gReg[6] = sdmac->shp_addr; > > - context->gReg[7] = sdmac->watermark_level; > > + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { > > + context->gReg[4] = sdmac->per_addr; > > + context->gReg[6] = sdmac->shp_addr; > > + } else { > > + context->gReg[0] = sdmac->event_mask[1]; > > + context->gReg[1] = sdmac->event_mask[0]; > > + context->gReg[2] = sdmac->per_addr; > > + context->gReg[6] = sdmac->shp_addr; > > + context->gReg[7] = sdmac->watermark_level; > > + } > > > > bd0->mode.command = C0_SETDM; > > bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD; @@ -1420,7 > > +1432,7 @@ static struct sdma_desc *sdma_transfer_init(struct > sdma_channel *sdmac, > > desc->sdmac = sdmac; > > desc->num_bd = bds; > > > > - if (sdma_alloc_bd(desc)) > > + if (bds && sdma_alloc_bd(desc)) > > goto err_desc_out; > > > > /* No slave_config called in MEMCPY case, so do here */ @@ > > -1585,13 +1597,16 @@ static struct dma_async_tx_descriptor > > *sdma_prep_dma_cyclic( { > > struct sdma_channel *sdmac = to_sdma_chan(chan); > > struct sdma_engine *sdma = sdmac->sdma; > > - int num_periods = buf_len / period_len; > > + int num_periods = 0; > > int channel = sdmac->channel; > > int i = 0, buf = 0; > > struct sdma_desc *desc; > > > > dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel); > > > > + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI) > > + num_periods = buf_len / period_len; > > + > > sdma_config_write(chan, &sdmac->slave_config, direction); > > > > desc = sdma_transfer_init(sdmac, direction, num_periods); @@ > > -1608,6 +1623,9 @@ static struct dma_async_tx_descriptor > *sdma_prep_dma_cyclic( > > goto err_bd_out; > > } > > > > + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) > > + return vchan_tx_prep(&sdmac->vc, &desc->vd, flags); > > + > > while (buf < buf_len) { > > struct sdma_buffer_descriptor *bd = &desc->bd[i]; > > int param; > > @@ -1668,6 +1686,10 @@ static int sdma_config_write(struct dma_chan > *chan, > > sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst > << 16) & > > SDMA_WATERMARK_LEVEL_HWML; > > sdmac->word_size = dmaengine_cfg->dst_addr_width; > > + } else if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { > > + sdmac->per_address = dmaengine_cfg->dst_addr; > > + sdmac->per_address2 = dmaengine_cfg->src_addr; > > + sdmac->watermark_level = 0; > > } else { > > sdmac->per_address = dmaengine_cfg->dst_addr; > > sdmac->watermark_level = dmaengine_cfg->dst_maxburst * > > You missed adding cyclic capability, pls add that The design of hdmi script achieves the cyclic capability and is different from common script. > > > diff --git a/include/linux/platform_data/dma-imx.h > > b/include/linux/platform_data/dma-imx.h > > index 281adbb26e6b..29ac21d40f28 100644 > > --- a/include/linux/platform_data/dma-imx.h > > +++ b/include/linux/platform_data/dma-imx.h > > @@ -39,6 +39,7 @@ enum sdma_peripheral_type { > > IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ > > IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ > > IMX_DMATYPE_SAI, /* SAI */ > > + IMX_DMATYPE_HDMI, /* HDMI Audio */ > > Why is this in latform_data, these should be moved to include/dt-bindings I will fix it in patch v2. > > -- > ~Vinod _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-05-24 7:58 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-10-21 5:16 [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio Joy Zou 2021-10-21 5:16 ` Joy Zou 2021-10-25 4:44 ` Vinod Koul 2021-10-25 4:44 ` Vinod Koul 2022-04-18 4:06 ` [EXT] " Joy Zou 2022-04-18 4:06 ` Joy Zou 2022-04-20 10:18 ` Vinod Koul 2022-04-20 10:18 ` Vinod Koul 2022-05-24 7:56 ` Joy Zou 2022-05-24 7:56 ` Joy Zou 2022-05-24 7:56 ` Joy Zou [this message] 2022-05-24 7:56 ` Joy Zou
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=AM6PR04MB592593CB38B5B391440478A3E1D79@AM6PR04MB5925.eurprd04.prod.outlook.com \ --to=joy.zou@nxp.com \ --cc=dmaengine@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=shengjiu.wang@nxp.com \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.