RE: [PATCH v2 5/7] arm64: dts: imx8mp: add the iMX8MP PCIe support

[Hongxing Zhu <hongxing.zhu@nxp.com>]

> -----Original Message-----
> From: Tim Harvey <tharvey@gateworks.com>
> Sent: 2022年5月24日 2:48
> To: Hongxing Zhu <hongxing.zhu@nxp.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>; p.zabel@pengutronix.de;
> bhelgaas@google.com; lorenzo.pieralisi@arm.com; robh@kernel.org;
> shawnguo@kernel.org; vkoul@kernel.org; alexander.stein@ew.tq-group.com;
> linux-phy@lists.infradead.org; devicetree@vger.kernel.org;
> linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de; dl-linux-imx
> <linux-imx@nxp.com>
> Subject: Re: [PATCH v2 5/7] arm64: dts: imx8mp: add the iMX8MP PCIe
> support
> 
> On Sun, Apr 17, 2022 at 10:00 PM Hongxing Zhu <hongxing.zhu@nxp.com>
> wrote:
> >
> > > -----Original Message-----
> > > From: Lucas Stach <l.stach@pengutronix.de>
> > > Sent: 2022年4月15日 5:03
> > > To: Hongxing Zhu <hongxing.zhu@nxp.com>; p.zabel@pengutronix.de;
> > > bhelgaas@google.com; lorenzo.pieralisi@arm.com; robh@kernel.org;
> > > shawnguo@kernel.org; vkoul@kernel.org;
> > > alexander.stein@ew.tq-group.com
> > > Cc: linux-phy@lists.infradead.org; devicetree@vger.kernel.org;
> > > linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> > > linux-kernel@vger.kernel.org; kernel@pengutronix.de; dl-linux-imx
> > > <linux-imx@nxp.com>
> > > Subject: Re: [PATCH v2 5/7] arm64: dts: imx8mp: add the iMX8MP PCIe
> > > support
> > >
> > > Am Montag, dem 07.03.2022 um 17:07 +0800 schrieb Richard Zhu:
> > > > Add the i.MX8MP PCIe support.
> > > >
> > > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > > > ---
> > > >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 46
> > > > ++++++++++++++++++++++-
> > > >  1 file changed, 45 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > index b40a5646f205..e7b3d8029e34 100644
> > > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > @@ -5,6 +5,7 @@
> > > >
> > > >  #include <dt-bindings/clock/imx8mp-clock.h>
> > > >  #include <dt-bindings/power/imx8mp-power.h>
> > > > +#include <dt-bindings/reset/imx8mp-reset.h>
> > > >  #include <dt-bindings/gpio/gpio.h>  #include
> > > > <dt-bindings/input/input.h>  #include
> > > > <dt-bindings/interrupt-controller/arm-gic.h>
> > > > @@ -375,7 +376,8 @@ iomuxc: pinctrl@30330000 {
> > > >                     };
> > > >
> > > >                     gpr: iomuxc-gpr@30340000 {
> > > > -                           compatible = "fsl,imx8mp-iomuxc-gpr",
> "syscon";
> > > > +                           compatible = "fsl,imx8mp-iomuxc-gpr",
> > > > +                                        "fsl,imx6q-iomuxc-gpr",
> > > > + "syscon";
> > > >                             reg = <0x30340000 0x10000>;
> > > >                     };
> > > >
> > > > @@ -965,6 +967,17 @@ aips4: bus@32c00000 {
> > > >                     #size-cells = <1>;
> > > >                     ranges;
> > > >
> > > > +                   pcie_phy: pcie-phy@32f00000 {
> > > > +                           compatible = "fsl,imx8mp-pcie-phy";
> > > > +                           reg = <0x32f00000 0x10000>;
> > > > +                           resets = <&src
> IMX8MP_RESET_PCIEPHY>,
> > > > +                                    <&src
> IMX8MP_RESET_PCIEPHY_PERST>;
> > > > +                           reset-names = "pciephy", "perst";
> > > > +                           power-domains = <&hsio_blk_ctrl
> > > IMX8MP_HSIOBLK_PD_PCIE_PHY>;
> > > > +                           #phy-cells = <0>;
> > > > +                           status = "disabled";
> > > > +                   };
> > > > +
> > > >                     hsio_blk_ctrl: blk-ctrl@32f10000 {
> > > >                             compatible = "fsl,imx8mp-hsio-blk-ctrl",
> "syscon";
> > > >                             reg = <0x32f10000 0x24>; @@ -980,6
> > > > +993,37 @@ hsio_blk_ctrl: blk-ctrl@32f10000 {
> > > >                     };
> > > >             };
> > > >
> > > > +           pcie: pcie@33800000 {
> > > > +                   compatible = "fsl,imx8mp-pcie";
> > > > +                   reg = <0x33800000 0x400000>, <0x1ff00000
> 0x80000>;
> > > > +                   reg-names = "dbi", "config";
> > > > +                   #address-cells = <3>;
> > > > +                   #size-cells = <2>;
> > > > +                   device_type = "pci";
> > > > +                   bus-range = <0x00 0xff>;
> > > > +                   ranges =  <0x81000000 0 0x00000000
> 0x1ff80000
> > > > + 0
> > > 0x00010000 /* downstream I/O 64KB */
> > > > +                              0x82000000 0 0x18000000
> 0x18000000
> > > > + 0
> > > 0x07f00000>; /* non-prefetchable memory */
> > > > +                   num-lanes = <1>;
> > > > +                   num-viewport = <4>;
> > > > +                   interrupts = <GIC_SPI 140
> IRQ_TYPE_LEVEL_HIGH>;
> > > > +                   interrupt-names = "msi";
> > > > +                   #interrupt-cells = <1>;
> > > > +                   interrupt-map-mask = <0 0 0 0x7>;
> > > > +                   interrupt-map = <0 0 0 1 &gic GIC_SPI 126
> > > IRQ_TYPE_LEVEL_HIGH>,
> > > > +                                   <0 0 0 2 &gic GIC_SPI 125
> IRQ_TYPE_LEVEL_HIGH>,
> > > > +                                   <0 0 0 3 &gic GIC_SPI 124
> IRQ_TYPE_LEVEL_HIGH>,
> > > > +                                   <0 0 0 4 &gic GIC_SPI 123
> IRQ_TYPE_LEVEL_HIGH>;
> > > > +                   fsl,max-link-speed = <3>;
> > >
> > > I believe that imx6_pcie_start_link does not properly handle Gen3 speeds.
> > Good caught.
> > The according link_gen condition should be changed in driver too.
> > Would be changed in next version.
> > Thanks.
> >
> > Best Regards
> > Richard Zhu
> > >
> > > Regards,
> > > Lucas
> > >
> > > > +                   linux,pci-domain = <0>;
> > > > +                   power-domains = <&hsio_blk_ctrl
> IMX8MP_HSIOBLK_PD_PCIE>;
> > > > +                   resets = <&src
> IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
> > > > +                            <&src
> IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
> > > > +                   reset-names = "apps", "turnoff";
> > > > +                   phys = <&pcie_phy>;
> > > > +                   phy-names = "pcie-phy";
> > > > +                   status = "disabled";
> > > > +           };
> > > > +
> > > >             gpu3d: gpu@38000000 {
> > > >                     compatible = "vivante,gc";
> > > >                     reg = <0x38000000 0x8000>;
> > >
> >
> 
> Richard,
> 
> Do you have an updated series for IMX8MP PCIe yet? I believe everything you
> were waiting on is now merged (blk-ctrl and power-domain).
Hi Tim:
Thanks for your kindly help.
Lucas has some suggestions and advices about the HSIOMIX bits manipulations
in the PHY driver of this series(#3 patch).
Would issue the next version, after co-operate with Lucas and settle-down
 that part.

Best Regards
Richard Zhu
> 
> Best Regards,
> 
> Tim