Re: Cannot get USB ports on custom beagleboard to work

Re: Cannot get USB ports on custom beagleboard to work

[Felipe Balbi]

On Mon, Jan 03, 2011 at 02:37:14AM +0400, Elvis Dowson wrote:
>Hi, I have a custom beagleboard on which I cannot seem to get the USB
>ports to work with a wired mouse, using a powered USB hub.
>
>Any suggestions on how I can trouble shoot this issue. This is based
>off the TI rowboat-eclair-2.6.32 kernel.

You'd have to try with linux-2.6.git or at least linux-omap-2.6.git for
this report to be valuable. Sorry, here we can only help with the open
source mainline kernel.

-- 
balbi

RE: Cannot get USB ports on custom beagleboard to work

[Premi, Sanjeev]

> -----Original Message-----
> From: linux-omap-owner@vger.kernel.org 
> [mailto:linux-omap-owner@vger.kernel.org] On Behalf Of Elvis Dowson
> Sent: Monday, January 03, 2011 4:07 AM
> To: linux-omap Mailing List
> Subject: Cannot get USB ports on custom beagleboard to work
> 
> Hi,
>        I have a custom beagleboard on which I cannot seem to 
> get the USB ports to work with a wired mouse, using a powered USB hub.
> 
> Any suggestions on how I can trouble shoot this issue. This 
> is based off the TI rowboat-eclair-2.6.32 kernel.
>
[snip]...[snip]

> Starting udev
> Remounting root file system...
> Caching udev devnodes
> Populating dev cache
> logger: mount: mount point /proc/bus/usb does not exist

I not familiar with the Android kernels, but based on this error:
Check that "CONFIG_USB_DEVICEFS=y" in your kernel configuration.

~sanjeev

[snip]...[snip]