* [Fwd: [kde] Low maximum volume with pulseaudio on kde]
@ 2011-06-18 14:14 Sérgio Basto
[not found] ` <BANLkTikF+mMbJreeC9GMPvK=9BnZxhhBYw@mail.gmail.com>
2011-06-19 2:41 ` Raymond Yau
0 siblings, 2 replies; 4+ messages in thread
From: Sérgio Basto @ 2011-06-18 14:14 UTC (permalink / raw)
To: alsa ML
-------- Forwarded Message --------
From: Sérgio Basto <sergio@serjux.com>
Reply-to: kde@mail.kde.org
To: KDE ML <kde@mail.kde.org>
Subject: [kde] Low maximum volume with pulseaudio on kde
Date: Wed, 15 Jun 2011 23:04:26 +0100
Hi, try again,
1st - edit /etc/pulse/client.conf
and change
autospawn = no
2nd - killall pulseaudio
3rd - run on user env:
pulseaudio -vvv
lets test with kmix I see on pulseaudio logs at maximum :
D: alsa-sink.c: Requested volume: 0: 100% 1: 100%
D: alsa-sink.c: Got hardware volume: 0: 100% 1: 100%
D: alsa-sink.c: Calculated software volume: 0: 100% 1: 100%
(accurate-enough=yes)
with gnome-control-center -> sound I see on pulseaudio logs at
maximum :
D: protocol-native.c: Client gnome-control-center changes volume of sink
alsa_output.pci-0000_00_1b.0.analog-stereo.
D: alsa-sink.c: Requested volume: 0: 153% 1: 153%
D: alsa-sink.c: Got hardware volume: 0: 100% 1: 100%
D: alsa-sink.c: Calculated software volume: 0: 153% 1: 153%
(accurate-enough=no)
so how I put kmix also control "software volume" since system use pulse-audio ?
I read this articles
http://www.webupd8.org/2009/08/increase-maximum-sound-level-in-ubuntu.html
http://alsa.opensrc.org/How_to_use_softvol_to_control_the_master_volume
but can't figure out.
thanks,
--
Sérgio M. B.
___________________________________________________
This message is from the kde mailing list.
Account management: https://mail.kde.org/mailman/listinfo/kde.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
--
Sérgio M. B.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Fwd: [kde] Low maximum volume with pulseaudio on kde]
[not found] ` <BANLkTik5a77n818ph_hGSztSrdjigmqLXw@mail.gmail.com>
@ 2011-06-18 18:41 ` Sérgio Basto
0 siblings, 0 replies; 4+ messages in thread
From: Sérgio Basto @ 2011-06-18 18:41 UTC (permalink / raw)
To: Daniel Chen; +Cc: alsa ML
On Sat, 2011-06-18 at 13:12 -0400, Daniel Chen wrote:
>
> On Jun 18, 2011 1:05 PM, "Sérgio Basto" <sergio@serjux.com> wrote:
> >
> > On Sat, 2011-06-18 at 10:19 -0400, Daniel Chen wrote:
> > >
> > > Does the GNOME volume control in Sound Preferences show that the
> > > slider is to the right of 100%?
> >
> > yes go to 150%
> >
> > --
> > Sérgio M. B.
> >
>
> You should probably get in touch with Colin Guthrie, who made
> modifications to Kmix to support PulseAudio. This isn't an alsa-devel
> issue per se.
so how I put kmix also control "software volume" since system use
pulseaudio ?
http://alsa.opensrc.org/How_to_use_softvol_to_control_the_master_volume
and if I disable pulseaudio , how I configure softvols with kmix or
AlsaMixer ?
> Cheers,
> -Dan
>
--
Sérgio M. B.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Fwd: [kde] Low maximum volume with pulseaudio on kde]
2011-06-18 14:14 [Fwd: [kde] Low maximum volume with pulseaudio on kde] Sérgio Basto
[not found] ` <BANLkTikF+mMbJreeC9GMPvK=9BnZxhhBYw@mail.gmail.com>
@ 2011-06-19 2:41 ` Raymond Yau
2011-06-19 10:02 ` Sérgio Basto
1 sibling, 1 reply; 4+ messages in thread
From: Raymond Yau @ 2011-06-19 2:41 UTC (permalink / raw)
To: ALSA Development Mailing List
2011/6/18 Sérgio Basto <sergio@serjux.com>:
> -------- Forwarded Message --------
> From: Sérgio Basto <sergio@serjux.com>
> Reply-to: kde@mail.kde.org
> To: KDE ML <kde@mail.kde.org>
> Subject: [kde] Low maximum volume with pulseaudio on kde
> Date: Wed, 15 Jun 2011 23:04:26 +0100
>
> Hi, try again,
Which sound card/HDA Codec are you using ?
>
> 1st - edit /etc/pulse/client.conf
> and change
> autospawn = no
>
> 2nd - killall pulseaudio
>
> 3rd - run on user env:
> pulseaudio -vvv
>
> lets test with kmix I see on pulseaudio logs at maximum :
which version of kmix/ubuntu are you using ?
AFAIK, the pulseaudio developer rewrorte kmix to use pulse api , and
"new" kmix does not use alsa mixer api any more
>
> D: alsa-sink.c: Requested volume: 0: 100% 1: 100%
> D: alsa-sink.c: Got hardware volume: 0: 100% 1: 100%
> D: alsa-sink.c: Calculated software volume: 0: 100% 1: 100%
> (accurate-enough=yes)
>
> with gnome-control-center -> sound I see on pulseaudio logs at
> maximum :
>
> D: protocol-native.c: Client gnome-control-center changes volume of sink
> alsa_output.pci-0000_00_1b.0.analog-stereo.
> D: alsa-sink.c: Requested volume: 0: 153% 1: 153%
> D: alsa-sink.c: Got hardware volume: 0: 100% 1: 100%
> D: alsa-sink.c: Calculated software volume: 0: 153% 1: 153%
> (accurate-enough=no)
>
> so how I put kmix also control "software volume" since system use pulse-audio ?
>
gnome sound preference already used pulse api and this is why you can
see value over 100%
Those values over 100% are software gain and sound is distorted when
clipping occur
> I read this articles
> http://www.webupd8.org/2009/08/increase-maximum-sound-level-in-ubuntu.html
The example in the above URL is properly wrong , since PA server does
not use "default" device
> http://alsa.opensrc.org/How_to_use_softvol_to_control_the_master_volume
>
The "More complex example " in the above URL for SBLive! Platinum
[CT4760P] is also incorrect.
When the application use
1) "hw" , the volume is controlled by "Wave Front" and "Wave Surround"
controls as the sound card pan stereo to front and rear jacks
2) "front", the volume is controlled by "Front Playback Volume"
3) "rear", the volume is controlled by "Surround Playback Volume"
4) "surround40" the volume is controlled by "Front Playback Volume"
and "Surround Playback Volume"
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Fwd: [kde] Low maximum volume with pulseaudio on kde]
2011-06-19 2:41 ` Raymond Yau
@ 2011-06-19 10:02 ` Sérgio Basto
0 siblings, 0 replies; 4+ messages in thread
From: Sérgio Basto @ 2011-06-19 10:02 UTC (permalink / raw)
To: Raymond Yau; +Cc: ALSA Development Mailing List
[-- Attachment #1: Type: text/plain, Size: 2923 bytes --]
On Sun, 2011-06-19 at 10:41 +0800, Raymond Yau wrote:
> 2011/6/18 Sérgio Basto <sergio@serjux.com>:
> > -------- Forwarded Message --------
> > From: Sérgio Basto <sergio@serjux.com>
> > Reply-to: kde@mail.kde.org
> > To: KDE ML <kde@mail.kde.org>
> > Subject: [kde] Low maximum volume with pulseaudio on kde
> > Date: Wed, 15 Jun 2011 23:04:26 +0100
> >
> > Hi, try again,
>
> Which sound card/HDA Codec are you using ?
in attach
> >
> > 1st - edit /etc/pulse/client.conf
> > and change
> > autospawn = no
> >
> > 2nd - killall pulseaudio
> >
> > 3rd - run on user env:
> > pulseaudio -vvv
> >
> > lets test with kmix I see on pulseaudio logs at maximum :
>
> which version of kmix/ubuntu are you using ?
Fedora 15 , kdemultimedia-4.6.3-1.fc15.x86_64
>
> AFAIK, the pulseaudio developer rewrorte kmix to use pulse api , and
> "new" kmix does not use alsa mixer api any more
>
> >
> > D: alsa-sink.c: Requested volume: 0: 100% 1: 100%
> > D: alsa-sink.c: Got hardware volume: 0: 100% 1: 100%
> > D: alsa-sink.c: Calculated software volume: 0: 100% 1: 100%
> > (accurate-enough=yes)
> >
> > with gnome-control-center -> sound I see on pulseaudio logs at
> > maximum :
> >
> > D: protocol-native.c: Client gnome-control-center changes volume of sink
> > alsa_output.pci-0000_00_1b.0.analog-stereo.
> > D: alsa-sink.c: Requested volume: 0: 153% 1: 153%
> > D: alsa-sink.c: Got hardware volume: 0: 100% 1: 100%
> > D: alsa-sink.c: Calculated software volume: 0: 153% 1: 153%
> > (accurate-enough=no)
> >
> > so how I put kmix also control "software volume" since system use pulse-audio ?
> >
>
> gnome sound preference already used pulse api and this is why you can
> see value over 100%
>
> Those values over 100% are software gain and sound is distorted when
> clipping occur
>
yeah
> > I read this articles
> > http://www.webupd8.org/2009/08/increase-maximum-sound-level-in-ubuntu.html
>
> The example in the above URL is properly wrong , since PA server does
> not use "default" device
>
> > http://alsa.opensrc.org/How_to_use_softvol_to_control_the_master_volume
> >
>
> The "More complex example " in the above URL for SBLive! Platinum
> [CT4760P] is also incorrect.
>
> When the application use
>
> 1) "hw" , the volume is controlled by "Wave Front" and "Wave Surround"
> controls as the sound card pan stereo to front and rear jacks
> 2) "front", the volume is controlled by "Front Playback Volume"
> 3) "rear", the volume is controlled by "Surround Playback Volume"
> 4) "surround40" the volume is controlled by "Front Playback Volume"
> and "Surround Playback Volume"
I just want a way to control sofvol, with alsamixer , kmixer ( we know
that gnome-control-center -> sound already do that) , can you give me a
example that works.
Seems I don't have dmix either .
Thanks,
--
Sérgio M. B.
[-- Attachment #2: alsa-info.txt.DuaIjbrd46 --]
[-- Type: text/plain, Size: 27177 bytes --]
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Sun Jun 19 09:21:13 UTC 2011
!!Linux Distribution
!!------------------
Fedora release 15 (Lovelock) Fedora release 15 (Lovelock) Fedora release 15 (Lovelock) Fedora release 15 (Lovelock)
!!DMI Information
!!---------------
Manufacturer: Dell Inc.
Product Name: Latitude E6410
Product Version: 0001
!!Kernel Information
!!------------------
Kernel release: 2.6.38.8-32.fc15.x86_64
Operating System: GNU/Linux
Architecture: x86_64
Processor: x86_64
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.23
Library version: 1.0.24
Utilities version: 1.0.24.1
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
aRts:
Installed - Yes (/usr/bin/artsd)
Running - No
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf6960000 irq 45
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!--------------------------------------------------------
00:1b.0 0403: 8086:3b56 (rev 05)
Subsystem: 1028:040a
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: IDT 92HD81B1C5
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x111d76d5
Subsystem Id: 0x1028040a
Revision Id: 0x100104
No Modem Function Group found
Default PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Power-Map: 0x00
Node 0x0a [Pin Complex] wcaps 0x400583: Stereo Amp-In
Control: name="Mic Jack Mode", index=0, device=0
ControlAmp: chs=0, dir=In, idx=0, ofs=0
Control: name="Mic Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x0001173c: IN OUT HP EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x04a11020: [Jack] Mic at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=03, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0421101f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x0c [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00011734: IN OUT EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0d [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00010050: OUT EAPD Balanced
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0e [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x23011050: [Jack] Line Out at Sep Left
Conn = 1/8, Color = Black
DefAssociation = 0x5, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=02, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x0f [Pin Complex] wcaps 0x400583: Stereo Amp-In
Control: name="Dock Mic Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x23a1102e: [Jack] Mic at Sep Left
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0xe
Pin-ctls: 0x20: IN
Unsolicited: tag=04, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x10 [Pin Complex] wcaps 0x400500: Mono
Pincap 0x00000010: OUT
Pin Default 0x400000f3: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x3
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Connection: 1
0x1a
Node 0x11 [Pin Complex] wcaps 0x400483: Stereo Amp-In
Control: name="Internal Mic Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0x90a60130: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x12 [Vendor Defined Widget] wcaps 0xf00503: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Power: setting=D0, actual=D0
Connection: 1
0x20
Node 0x13 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Front Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=63
Control: name="Front Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="STAC92xx Analog", type="Audio", device=0
Amp-Out caps: N/A
Amp-Out vals: [0x6b 0x6b]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x14 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=63
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: N/A
Amp-Out vals: [0x6b 0x6b]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x15 [Audio Input] wcaps 0x1d0541: Stereo
Device: name="STAC92xx Analog", type="Audio", device=0
Converter: stream=1, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x17
Processing caps: benign=0, ncoeff=0
Node 0x16 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x18
Processing caps: benign=0, ncoeff=0
Node 0x17 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 7
0x0c 0x0e 0x0f 0x1b 0x11* 0x12 0x0a
Node 0x18 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 7
0x0c* 0x0e 0x0f 0x1b 0x11 0x12 0x0a
Node 0x19 [Audio Selector] wcaps 0x300501: Stereo
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x1a [Audio Mixer] wcaps 0x200500: Mono
Power: setting=D0, actual=D0
Connection: 1
0x19
Node 0x1b [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
Power: setting=D0, actual=D0
Connection: 6
0x0c 0x0e 0x0f 0x13 0x14 0x0a
Node 0x1c [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x9f 0x9f]
Power: setting=D0, actual=D0
Connection: 1
0x1b
Node 0x1d [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1e [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1f [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1d
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000034: IN OUT Detect
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x21 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Conexant ID 2c06
Address: 1
MFG Function Id: 0x2 (unsol 1)
Vendor Id: 0x14f12c06
Subsystem Id: 0x14f1000f
Revision Id: 0x100000
Modem Function Group: 0x2
Codec: Intel IbexPeak HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862804
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=8, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x04 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=04, enabled=1
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02* 0x03
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560020: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=05, enabled=1
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02* 0x03
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560030: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02* 0x03
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 8 Jun 19 10:04 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 7 Jun 19 10:04 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 6 Jun 19 10:04 /dev/snd/hwC0D1
crw-rw----+ 1 root audio 116, 5 Jun 19 10:04 /dev/snd/hwC0D3
crw-rw----+ 1 root audio 116, 4 Jun 19 10:06 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Jun 19 10:18 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 2 Jun 19 10:06 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116, 1 Jun 19 10:04 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Jun 19 10:04 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Jun 19 10:04 .
drwxr-xr-x 3 root root 240 Jun 19 10:04 ..
lrwxrwxrwx 1 root root 12 Jun 19 10:04 pci-0000:00:1b.0 -> ../controlC0
!!ALSA configuration files
!!------------------------
!!System wide config file (/etc/asound.conf)
#
# Place your global alsa-lib configuration here...
#
@hooks [
{
func load
files [
#"/etc/pulse/my-default.conf"
"/etc/alsa/pulse-default.conf"
#"/etc/alsa/alsactl.conf"
]
errors false
}
]
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xf6960000 irq 45'
Mixer name : 'Intel IbexPeak HDMI'
Components : 'HDA:111d76d5,1028040a,00100104 HDA:14f12c06,14f1000f,00100000 HDA:80862804,80860101,00100000'
Controls : 20
Simple ctrls : 11
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 44 [69%] [-15.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 253 [99%] [0.40dB]
Front Right: Playback 253 [99%] [0.40dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Mic',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 3
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Mic In'
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 3
Mono: Playback 1 [33%] [-12.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Dock Mic',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 3
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 3
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control.1 {
iface MIXER
name 'Front Playback Volume'
value.0 64
value.1 64
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -4800
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Mic Jack Mode'
value 'Mic In'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Mic In'
item.1 'Line In'
}
}
control.4 {
iface MIXER
name 'Beep Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.5 {
iface MIXER
name 'Beep Playback Volume'
value 1
comment {
access 'read write'
type INTEGER
count 1
range '0 - 3'
dbmin -1800
dbmax 0
dbvalue.0 -1200
}
}
control.6 {
iface MIXER
name 'Headphone Playback Volume'
value.0 64
value.1 64
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -4800
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.7 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 15'
dbmin 0
dbmax 2250
dbvalue.0 0
dbvalue.1 0
}
}
control.9 {
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.10 {
iface MIXER
name 'Mic Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.11 {
iface MIXER
name 'Dock Mic Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.12 {
iface MIXER
name 'Internal Mic Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.13 {
iface MIXER
name 'Master Playback Volume'
value 44
comment {
access 'read write'
type INTEGER
count 1
range '0 - 64'
dbmin -9999999
dbmax 0
dbvalue.0 -1500
}
}
control.14 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.15 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.16 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.17 {
iface MIXER
name 'IEC958 Playback Default'
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.18 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.19 {
iface MIXER
name 'PCM Playback Volume'
value.0 253
value.1 253
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -40
dbvalue.1 -40
}
}
control.20 {
iface MIXER
name PCM
value.0 253
value.1 253
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -40
dbvalue.1 -40
}
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
tcp_lp
fuse
ip6table_filter
ip6_tables
ebtable_nat
ebtables
ipt_MASQUERADE
iptable_nat
nf_nat
xt_CHECKSUM
iptable_mangle
bridge
stp
llc
sunrpc
cpufreq_ondemand
acpi_cpufreq
freq_table
mperf
sco
bnep
l2cap
bluetooth
snd_hda_codec_hdmi
snd_hda_codec_idt
arc4
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_seq
snd_seq_device
snd_pcm
uvcvideo
videodev
v4l2_compat_ioctl32
iwlagn
dell_laptop
iTCO_wdt
e1000e
iwlcore
mac80211
snd_timer
cfg80211
snd
dell_wmi
soundcore
rfkill
snd_page_alloc
iTCO_vendor_support
sparse_keymap
ppdev
i2c_i801
intel_ips
dcdbas
parport_pc
parport
microcode
wmi
virtio_net
kvm_intel
kvm
ipv6
sdhci_pci
sdhci
mmc_core
firewire_ohci
yenta_socket
firewire_core
crc_itu_t
i915
drm_kms_helper
drm
i2c_algo_bit
i2c_core
video
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:
0x0a 0x04a11020
0x0b 0x0421101f
0x0c 0x400000f0
0x0d 0x90170110
0x0e 0x23011050
0x0f 0x23a1102e
0x10 0x400000f3
0x11 0x90a60130
0x1f 0x400000f0
0x20 0x400000f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D1/init_pin_configs:
0x73 0x016a10f0
/sys/class/sound/hwC0D1/driver_pin_configs:
/sys/class/sound/hwC0D1/user_pin_configs:
/sys/class/sound/hwC0D1/init_verbs:
/sys/class/sound/hwC0D3/init_pin_configs:
0x04 0x18560010
0x05 0x18560020
0x06 0x58560030
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
!!ALSA/HDA dmesg
!!------------------
[ 15.276507] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.397589] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.397763] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 15.397797] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.567623] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 15.599523] ALSA sound/pci/hda/hda_codec.c:4633: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0)
[ 15.599531] ALSA sound/pci/hda/hda_codec.c:4637: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 15.599537] ALSA sound/pci/hda/hda_codec.c:4641: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 15.599543] ALSA sound/pci/hda/hda_codec.c:4642: mono: mono_out=0x0
[ 15.599548] ALSA sound/pci/hda/hda_codec.c:4646: inputs:
[ 15.599552] ALSA sound/pci/hda/hda_codec.c:4652:
[ 15.600267] ALSA sound/pci/hda/patch_sigmatel.c:3073: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
[ 15.663111] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 15.663317] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.663502] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 15.663678] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 15.789272] cfg80211: Calling CRDA for country: PT
--
[ 60.050665] fuse init (API version 7.16)
[ 262.993299] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 455.022007] TCP lp registered
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-06-19 10:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-18 14:14 [Fwd: [kde] Low maximum volume with pulseaudio on kde] Sérgio Basto
[not found] ` <BANLkTikF+mMbJreeC9GMPvK=9BnZxhhBYw@mail.gmail.com>
[not found] ` <1308416756.32022.5.camel@segulix>
[not found] ` <BANLkTik5a77n818ph_hGSztSrdjigmqLXw@mail.gmail.com>
2011-06-18 18:41 ` Sérgio Basto
2011-06-19 2:41 ` Raymond Yau
2011-06-19 10:02 ` Sérgio Basto
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.