[PATCH 2/2] drm/amd/powerplay: avoid using pm_en before it is initialized revised

[PATCH 2/2] drm/amd/powerplay: avoid using pm_en before it is initialized revised

[Tiecheng Zhou]

hwmgr->pm_en is initialized at hwmgr_hw_init.
during amdgpu_device_init, there is amdgpu_asic_reset that calls to
pp_get_asic_baco_capability, while hwmgr->pm_en has not yet been initialized.

this is to avoid using pm_en in pp_get_asic_baco_capability

Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Yintian Tao <yttao@amd.com>
---
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index 71b843f542d8..fb4ca614f6e3 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -1438,7 +1438,8 @@ static int pp_get_asic_baco_capability(void *handle, bool *cap)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->get_asic_baco_capability)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->get_asic_baco_capability)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
-- 
2.17.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

RE: [PATCH 2/2] drm/amd/powerplay: avoid using pm_en before it is initialized revised

[Zhou, Tiecheng]

[AMD Official Use Only - Internal Distribution Only]

Sorry for bothering, I'm going to send another one,

It seems pm_en should not be used in get_asic_baco_capability, get_asic_baco_state, set_asic_baco_state.


-----Original Message-----
From: Tiecheng Zhou <Tiecheng.Zhou@amd.com> 
Sent: Monday, April 27, 2020 9:57 AM
To: amd-gfx@lists.freedesktop.org
Cc: Zhou, Tiecheng <Tiecheng.Zhou@amd.com>; Tao, Yintian <Yintian.Tao@amd.com>
Subject: [PATCH 2/2] drm/amd/powerplay: avoid using pm_en before it is initialized revised

hwmgr->pm_en is initialized at hwmgr_hw_init.
during amdgpu_device_init, there is amdgpu_asic_reset that calls to pp_get_asic_baco_capability, while hwmgr->pm_en has not yet been initialized.

this is to avoid using pm_en in pp_get_asic_baco_capability

Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Yintian Tao <yttao@amd.com>
---
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index 71b843f542d8..fb4ca614f6e3 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -1438,7 +1438,8 @@ static int pp_get_asic_baco_capability(void *handle, bool *cap)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->get_asic_baco_capability)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->get_asic_baco_capability)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
--
2.17.1
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

RE: [PATCH 2/2] drm/amd/powerplay: avoid using pm_en before it is initialized revised

[Quan, Evan]

Series s reviewed-by: Evan Quan <evan.quan@amd.com>

-----Original Message-----
From: amd-gfx <amd-gfx-bounces@lists.freedesktop.org> On Behalf Of Tiecheng Zhou
Sent: Monday, April 27, 2020 11:30 AM
To: amd-gfx@lists.freedesktop.org
Cc: Zhou, Tiecheng <Tiecheng.Zhou@amd.com>
Subject: [PATCH 2/2] drm/amd/powerplay: avoid using pm_en before it is initialized revised

hwmgr->pm_en is initialized at hwmgr_hw_init.

during amdgpu_device_init, there is amdgpu_asic_reset that calls to soc15_asic_reset (for V320 usecase, Vega10 asic), in which:
1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en)
2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en)

pm_en is used in the above two cases while it has not yet been initialized

So avoid using pm_en in the above two functions for V320 passthrough.

Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
---
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index 71b843f542d8..fc31499c2e5c 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -1438,7 +1438,8 @@ static int pp_get_asic_baco_capability(void *handle, bool *cap)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->get_asic_baco_capability)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->get_asic_baco_capability)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
@@ -1472,7 +1473,8 @@ static int pp_set_asic_baco_state(void *handle, int state)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->set_asic_baco_state)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->set_asic_baco_state)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
--
2.17.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&amp;data=02%7C01%7Cevan.quan%40amd.com%7C083ee458638840b718b708d7ea5b3934%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637235550456598209&amp;sdata=hn2iTGG4U5RgB9QEwYbjZkSwbcpo3wjMsiMu%2BJc%2BbuA%3D&amp;reserved=0
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH 2/2] drm/amd/powerplay: avoid using pm_en before it is initialized revised

[Tiecheng Zhou]

hwmgr->pm_en is initialized at hwmgr_hw_init.

during amdgpu_device_init, there is amdgpu_asic_reset that calls to
soc15_asic_reset (for V320 usecase, Vega10 asic), in which:
1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en)
2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en)

pm_en is used in the above two cases while it has not yet been initialized

So avoid using pm_en in the above two functions for V320 passthrough.

Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
---
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index 71b843f542d8..fc31499c2e5c 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -1438,7 +1438,8 @@ static int pp_get_asic_baco_capability(void *handle, bool *cap)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->get_asic_baco_capability)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->get_asic_baco_capability)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
@@ -1472,7 +1473,8 @@ static int pp_set_asic_baco_state(void *handle, int state)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->set_asic_baco_state)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->set_asic_baco_state)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
-- 
2.17.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx