* [PULL] ath10k & ath11k firmware 20220307
@ 2022-03-07 17:37 ` Kalle Valo
0 siblings, 0 replies; 9+ messages in thread
From: Kalle Valo @ 2022-03-07 17:37 UTC (permalink / raw)
To: linux-firmware; +Cc: linux-wireless, ath10k, ath11k
Hi,
Here is a small pull request to use "File:" on all ath10k and ath11k notice.txt files and add support for
WCN6855 hw2.0 and hw2.1 hardware families. Please let me know if there are any problems.
Kalle
The following changes since commit f011ccb490f952ea35e9ce4d73ca9b7d0d2453c3:
linux-firmware: add firmware for MT7986 (2022-03-04 08:43:26 -0500)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware.git ath10k-20220307
for you to fetch changes up to e8bc0db413b4ab7f8e540ffa17991ff61252de9c:
ath11k: add links for WCN6855 hw2.1 (2022-03-07 19:18:22 +0200)
----------------------------------------------------------------
Kalle Valo (4):
ath10k/ath11k: mark notice.txt as "File:"
ath11k: WCN6855 hw2.0: add board-2.bin and regdb.bin
ath11k: WCN6855 hw2.0: add WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
ath11k: add links for WCN6855 hw2.1
WHENCE | 46 +-
ath11k/WCN6855/hw2.0/Notice.txt | 3658 ++++++++++++++++++++++++++++++++++++++
ath11k/WCN6855/hw2.0/amss.bin | Bin 0 -> 4972544 bytes
ath11k/WCN6855/hw2.0/board-2.bin | Bin 0 -> 1322820 bytes
ath11k/WCN6855/hw2.0/m3.bin | Bin 0 -> 266684 bytes
ath11k/WCN6855/hw2.0/regdb.bin | Bin 0 -> 24310 bytes
6 files changed, 3686 insertions(+), 18 deletions(-)
create mode 100644 ath11k/WCN6855/hw2.0/Notice.txt
create mode 100644 ath11k/WCN6855/hw2.0/amss.bin
create mode 100644 ath11k/WCN6855/hw2.0/board-2.bin
create mode 100644 ath11k/WCN6855/hw2.0/m3.bin
create mode 100644 ath11k/WCN6855/hw2.0/regdb.bin
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PULL] ath10k & ath11k firmware 20220307
@ 2022-03-07 17:37 ` Kalle Valo
0 siblings, 0 replies; 9+ messages in thread
From: Kalle Valo @ 2022-03-07 17:37 UTC (permalink / raw)
To: linux-firmware; +Cc: linux-wireless, ath10k, ath11k
Hi,
Here is a small pull request to use "File:" on all ath10k and ath11k notice.txt files and add support for
WCN6855 hw2.0 and hw2.1 hardware families. Please let me know if there are any problems.
Kalle
The following changes since commit f011ccb490f952ea35e9ce4d73ca9b7d0d2453c3:
linux-firmware: add firmware for MT7986 (2022-03-04 08:43:26 -0500)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware.git ath10k-20220307
for you to fetch changes up to e8bc0db413b4ab7f8e540ffa17991ff61252de9c:
ath11k: add links for WCN6855 hw2.1 (2022-03-07 19:18:22 +0200)
----------------------------------------------------------------
Kalle Valo (4):
ath10k/ath11k: mark notice.txt as "File:"
ath11k: WCN6855 hw2.0: add board-2.bin and regdb.bin
ath11k: WCN6855 hw2.0: add WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
ath11k: add links for WCN6855 hw2.1
WHENCE | 46 +-
ath11k/WCN6855/hw2.0/Notice.txt | 3658 ++++++++++++++++++++++++++++++++++++++
ath11k/WCN6855/hw2.0/amss.bin | Bin 0 -> 4972544 bytes
ath11k/WCN6855/hw2.0/board-2.bin | Bin 0 -> 1322820 bytes
ath11k/WCN6855/hw2.0/m3.bin | Bin 0 -> 266684 bytes
ath11k/WCN6855/hw2.0/regdb.bin | Bin 0 -> 24310 bytes
6 files changed, 3686 insertions(+), 18 deletions(-)
create mode 100644 ath11k/WCN6855/hw2.0/Notice.txt
create mode 100644 ath11k/WCN6855/hw2.0/amss.bin
create mode 100644 ath11k/WCN6855/hw2.0/board-2.bin
create mode 100644 ath11k/WCN6855/hw2.0/m3.bin
create mode 100644 ath11k/WCN6855/hw2.0/regdb.bin
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PULL] ath10k & ath11k firmware 20220307
@ 2022-03-07 17:37 ` Kalle Valo
0 siblings, 0 replies; 9+ messages in thread
From: Kalle Valo @ 2022-03-07 17:37 UTC (permalink / raw)
To: linux-firmware; +Cc: linux-wireless, ath10k, ath11k
Hi,
Here is a small pull request to use "File:" on all ath10k and ath11k notice.txt files and add support for
WCN6855 hw2.0 and hw2.1 hardware families. Please let me know if there are any problems.
Kalle
The following changes since commit f011ccb490f952ea35e9ce4d73ca9b7d0d2453c3:
linux-firmware: add firmware for MT7986 (2022-03-04 08:43:26 -0500)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware.git ath10k-20220307
for you to fetch changes up to e8bc0db413b4ab7f8e540ffa17991ff61252de9c:
ath11k: add links for WCN6855 hw2.1 (2022-03-07 19:18:22 +0200)
----------------------------------------------------------------
Kalle Valo (4):
ath10k/ath11k: mark notice.txt as "File:"
ath11k: WCN6855 hw2.0: add board-2.bin and regdb.bin
ath11k: WCN6855 hw2.0: add WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
ath11k: add links for WCN6855 hw2.1
WHENCE | 46 +-
ath11k/WCN6855/hw2.0/Notice.txt | 3658 ++++++++++++++++++++++++++++++++++++++
ath11k/WCN6855/hw2.0/amss.bin | Bin 0 -> 4972544 bytes
ath11k/WCN6855/hw2.0/board-2.bin | Bin 0 -> 1322820 bytes
ath11k/WCN6855/hw2.0/m3.bin | Bin 0 -> 266684 bytes
ath11k/WCN6855/hw2.0/regdb.bin | Bin 0 -> 24310 bytes
6 files changed, 3686 insertions(+), 18 deletions(-)
create mode 100644 ath11k/WCN6855/hw2.0/Notice.txt
create mode 100644 ath11k/WCN6855/hw2.0/amss.bin
create mode 100644 ath11k/WCN6855/hw2.0/board-2.bin
create mode 100644 ath11k/WCN6855/hw2.0/m3.bin
create mode 100644 ath11k/WCN6855/hw2.0/regdb.bin
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PULL] ath10k & ath11k firmware 20220307
2022-03-07 17:37 ` Kalle Valo
(?)
@ 2022-03-09 12:28 ` Josh Boyer
-1 siblings, 0 replies; 9+ messages in thread
From: Josh Boyer @ 2022-03-09 12:28 UTC (permalink / raw)
To: Kalle Valo; +Cc: linux-firmware, linux-wireless, ath10k, ath11k
On Mon, Mar 7, 2022 at 12:37 PM Kalle Valo <kvalo@qca.qualcomm.com> wrote:
>
> Hi,
>
> Here is a small pull request to use "File:" on all ath10k and ath11k notice.txt files and add support for
> WCN6855 hw2.0 and hw2.1 hardware families. Please let me know if there are any problems.
>
> Kalle
>
> The following changes since commit f011ccb490f952ea35e9ce4d73ca9b7d0d2453c3:
>
> linux-firmware: add firmware for MT7986 (2022-03-04 08:43:26 -0500)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware.git ath10k-20220307
>
> for you to fetch changes up to e8bc0db413b4ab7f8e540ffa17991ff61252de9c:
>
> ath11k: add links for WCN6855 hw2.1 (2022-03-07 19:18:22 +0200)
>
> ----------------------------------------------------------------
> Kalle Valo (4):
> ath10k/ath11k: mark notice.txt as "File:"
> ath11k: WCN6855 hw2.0: add board-2.bin and regdb.bin
> ath11k: WCN6855 hw2.0: add WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
> ath11k: add links for WCN6855 hw2.1
Pulled and pushed out. Thank you for working with me on this.
josh
>
> WHENCE | 46 +-
> ath11k/WCN6855/hw2.0/Notice.txt | 3658 ++++++++++++++++++++++++++++++++++++++
> ath11k/WCN6855/hw2.0/amss.bin | Bin 0 -> 4972544 bytes
> ath11k/WCN6855/hw2.0/board-2.bin | Bin 0 -> 1322820 bytes
> ath11k/WCN6855/hw2.0/m3.bin | Bin 0 -> 266684 bytes
> ath11k/WCN6855/hw2.0/regdb.bin | Bin 0 -> 24310 bytes
> 6 files changed, 3686 insertions(+), 18 deletions(-)
> create mode 100644 ath11k/WCN6855/hw2.0/Notice.txt
> create mode 100644 ath11k/WCN6855/hw2.0/amss.bin
> create mode 100644 ath11k/WCN6855/hw2.0/board-2.bin
> create mode 100644 ath11k/WCN6855/hw2.0/m3.bin
> create mode 100644 ath11k/WCN6855/hw2.0/regdb.bin
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PULL] ath10k & ath11k firmware 20220307
@ 2022-03-09 12:28 ` Josh Boyer
0 siblings, 0 replies; 9+ messages in thread
From: Josh Boyer @ 2022-03-09 12:28 UTC (permalink / raw)
To: Kalle Valo; +Cc: linux-firmware, linux-wireless, ath10k, ath11k
On Mon, Mar 7, 2022 at 12:37 PM Kalle Valo <kvalo@qca.qualcomm.com> wrote:
>
> Hi,
>
> Here is a small pull request to use "File:" on all ath10k and ath11k notice.txt files and add support for
> WCN6855 hw2.0 and hw2.1 hardware families. Please let me know if there are any problems.
>
> Kalle
>
> The following changes since commit f011ccb490f952ea35e9ce4d73ca9b7d0d2453c3:
>
> linux-firmware: add firmware for MT7986 (2022-03-04 08:43:26 -0500)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware.git ath10k-20220307
>
> for you to fetch changes up to e8bc0db413b4ab7f8e540ffa17991ff61252de9c:
>
> ath11k: add links for WCN6855 hw2.1 (2022-03-07 19:18:22 +0200)
>
> ----------------------------------------------------------------
> Kalle Valo (4):
> ath10k/ath11k: mark notice.txt as "File:"
> ath11k: WCN6855 hw2.0: add board-2.bin and regdb.bin
> ath11k: WCN6855 hw2.0: add WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
> ath11k: add links for WCN6855 hw2.1
Pulled and pushed out. Thank you for working with me on this.
josh
>
> WHENCE | 46 +-
> ath11k/WCN6855/hw2.0/Notice.txt | 3658 ++++++++++++++++++++++++++++++++++++++
> ath11k/WCN6855/hw2.0/amss.bin | Bin 0 -> 4972544 bytes
> ath11k/WCN6855/hw2.0/board-2.bin | Bin 0 -> 1322820 bytes
> ath11k/WCN6855/hw2.0/m3.bin | Bin 0 -> 266684 bytes
> ath11k/WCN6855/hw2.0/regdb.bin | Bin 0 -> 24310 bytes
> 6 files changed, 3686 insertions(+), 18 deletions(-)
> create mode 100644 ath11k/WCN6855/hw2.0/Notice.txt
> create mode 100644 ath11k/WCN6855/hw2.0/amss.bin
> create mode 100644 ath11k/WCN6855/hw2.0/board-2.bin
> create mode 100644 ath11k/WCN6855/hw2.0/m3.bin
> create mode 100644 ath11k/WCN6855/hw2.0/regdb.bin
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PULL] ath10k & ath11k firmware 20220307
@ 2022-03-09 12:28 ` Josh Boyer
0 siblings, 0 replies; 9+ messages in thread
From: Josh Boyer @ 2022-03-09 12:28 UTC (permalink / raw)
To: Kalle Valo; +Cc: linux-firmware, linux-wireless, ath10k, ath11k
On Mon, Mar 7, 2022 at 12:37 PM Kalle Valo <kvalo@qca.qualcomm.com> wrote:
>
> Hi,
>
> Here is a small pull request to use "File:" on all ath10k and ath11k notice.txt files and add support for
> WCN6855 hw2.0 and hw2.1 hardware families. Please let me know if there are any problems.
>
> Kalle
>
> The following changes since commit f011ccb490f952ea35e9ce4d73ca9b7d0d2453c3:
>
> linux-firmware: add firmware for MT7986 (2022-03-04 08:43:26 -0500)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware.git ath10k-20220307
>
> for you to fetch changes up to e8bc0db413b4ab7f8e540ffa17991ff61252de9c:
>
> ath11k: add links for WCN6855 hw2.1 (2022-03-07 19:18:22 +0200)
>
> ----------------------------------------------------------------
> Kalle Valo (4):
> ath10k/ath11k: mark notice.txt as "File:"
> ath11k: WCN6855 hw2.0: add board-2.bin and regdb.bin
> ath11k: WCN6855 hw2.0: add WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
> ath11k: add links for WCN6855 hw2.1
Pulled and pushed out. Thank you for working with me on this.
josh
>
> WHENCE | 46 +-
> ath11k/WCN6855/hw2.0/Notice.txt | 3658 ++++++++++++++++++++++++++++++++++++++
> ath11k/WCN6855/hw2.0/amss.bin | Bin 0 -> 4972544 bytes
> ath11k/WCN6855/hw2.0/board-2.bin | Bin 0 -> 1322820 bytes
> ath11k/WCN6855/hw2.0/m3.bin | Bin 0 -> 266684 bytes
> ath11k/WCN6855/hw2.0/regdb.bin | Bin 0 -> 24310 bytes
> 6 files changed, 3686 insertions(+), 18 deletions(-)
> create mode 100644 ath11k/WCN6855/hw2.0/Notice.txt
> create mode 100644 ath11k/WCN6855/hw2.0/amss.bin
> create mode 100644 ath11k/WCN6855/hw2.0/board-2.bin
> create mode 100644 ath11k/WCN6855/hw2.0/m3.bin
> create mode 100644 ath11k/WCN6855/hw2.0/regdb.bin
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PULL] ath10k & ath11k firmware 20220307
2022-03-09 12:28 ` Josh Boyer
(?)
@ 2022-03-09 13:44 ` Kalle Valo
-1 siblings, 0 replies; 9+ messages in thread
From: Kalle Valo @ 2022-03-09 13:44 UTC (permalink / raw)
To: Josh Boyer; +Cc: linux-firmware, linux-wireless, ath10k, ath11k
Josh Boyer <jwboyer@kernel.org> writes:
> On Mon, Mar 7, 2022 at 12:37 PM Kalle Valo <kvalo@qca.qualcomm.com> wrote:
>>
>> Hi,
>>
>> Here is a small pull request to use "File:" on all ath10k and ath11k notice.txt files and add support for
>> WCN6855 hw2.0 and hw2.1 hardware families. Please let me know if there are any problems.
>>
>> Kalle
>>
>> The following changes since commit f011ccb490f952ea35e9ce4d73ca9b7d0d2453c3:
>>
>> linux-firmware: add firmware for MT7986 (2022-03-04 08:43:26 -0500)
>>
>> are available in the Git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware.git ath10k-20220307
>>
>> for you to fetch changes up to e8bc0db413b4ab7f8e540ffa17991ff61252de9c:
>>
>> ath11k: add links for WCN6855 hw2.1 (2022-03-07 19:18:22 +0200)
>>
>> ----------------------------------------------------------------
>> Kalle Valo (4):
>> ath10k/ath11k: mark notice.txt as "File:"
>> ath11k: WCN6855 hw2.0: add board-2.bin and regdb.bin
>> ath11k: WCN6855 hw2.0: add WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
>> ath11k: add links for WCN6855 hw2.1
>
> Pulled and pushed out. Thank you for working with me on this.
Great, thanks for pulling!
Next I need to get the rest of notice.txt files cleaned up and then I'll
send a second pull request with updates and new firmwares. But that will
take some time, it's a tedious process.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PULL] ath10k & ath11k firmware 20220307
@ 2022-03-09 13:44 ` Kalle Valo
0 siblings, 0 replies; 9+ messages in thread
From: Kalle Valo @ 2022-03-09 13:44 UTC (permalink / raw)
To: Josh Boyer; +Cc: linux-firmware, linux-wireless, ath10k, ath11k
Josh Boyer <jwboyer@kernel.org> writes:
> On Mon, Mar 7, 2022 at 12:37 PM Kalle Valo <kvalo@qca.qualcomm.com> wrote:
>>
>> Hi,
>>
>> Here is a small pull request to use "File:" on all ath10k and ath11k notice.txt files and add support for
>> WCN6855 hw2.0 and hw2.1 hardware families. Please let me know if there are any problems.
>>
>> Kalle
>>
>> The following changes since commit f011ccb490f952ea35e9ce4d73ca9b7d0d2453c3:
>>
>> linux-firmware: add firmware for MT7986 (2022-03-04 08:43:26 -0500)
>>
>> are available in the Git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware.git ath10k-20220307
>>
>> for you to fetch changes up to e8bc0db413b4ab7f8e540ffa17991ff61252de9c:
>>
>> ath11k: add links for WCN6855 hw2.1 (2022-03-07 19:18:22 +0200)
>>
>> ----------------------------------------------------------------
>> Kalle Valo (4):
>> ath10k/ath11k: mark notice.txt as "File:"
>> ath11k: WCN6855 hw2.0: add board-2.bin and regdb.bin
>> ath11k: WCN6855 hw2.0: add WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
>> ath11k: add links for WCN6855 hw2.1
>
> Pulled and pushed out. Thank you for working with me on this.
Great, thanks for pulling!
Next I need to get the rest of notice.txt files cleaned up and then I'll
send a second pull request with updates and new firmwares. But that will
take some time, it's a tedious process.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PULL] ath10k & ath11k firmware 20220307
@ 2022-03-09 13:44 ` Kalle Valo
0 siblings, 0 replies; 9+ messages in thread
From: Kalle Valo @ 2022-03-09 13:44 UTC (permalink / raw)
To: Josh Boyer; +Cc: linux-firmware, linux-wireless, ath10k, ath11k
Josh Boyer <jwboyer@kernel.org> writes:
> On Mon, Mar 7, 2022 at 12:37 PM Kalle Valo <kvalo@qca.qualcomm.com> wrote:
>>
>> Hi,
>>
>> Here is a small pull request to use "File:" on all ath10k and ath11k notice.txt files and add support for
>> WCN6855 hw2.0 and hw2.1 hardware families. Please let me know if there are any problems.
>>
>> Kalle
>>
>> The following changes since commit f011ccb490f952ea35e9ce4d73ca9b7d0d2453c3:
>>
>> linux-firmware: add firmware for MT7986 (2022-03-04 08:43:26 -0500)
>>
>> are available in the Git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware.git ath10k-20220307
>>
>> for you to fetch changes up to e8bc0db413b4ab7f8e540ffa17991ff61252de9c:
>>
>> ath11k: add links for WCN6855 hw2.1 (2022-03-07 19:18:22 +0200)
>>
>> ----------------------------------------------------------------
>> Kalle Valo (4):
>> ath10k/ath11k: mark notice.txt as "File:"
>> ath11k: WCN6855 hw2.0: add board-2.bin and regdb.bin
>> ath11k: WCN6855 hw2.0: add WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
>> ath11k: add links for WCN6855 hw2.1
>
> Pulled and pushed out. Thank you for working with me on this.
Great, thanks for pulling!
Next I need to get the rest of notice.txt files cleaned up and then I'll
send a second pull request with updates and new firmwares. But that will
take some time, it's a tedious process.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-03-09 13:45 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-07 17:37 [PULL] ath10k & ath11k firmware 20220307 Kalle Valo
2022-03-07 17:37 ` Kalle Valo
2022-03-07 17:37 ` Kalle Valo
2022-03-09 12:28 ` Josh Boyer
2022-03-09 12:28 ` Josh Boyer
2022-03-09 12:28 ` Josh Boyer
2022-03-09 13:44 ` Kalle Valo
2022-03-09 13:44 ` Kalle Valo
2022-03-09 13:44 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.