Removing hostapd init file

Removing hostapd init file

[Kristupas Savickas]

[-- Attachment #1: Type: text/plain, Size: 6181 bytes --]

Greetings,

I'm trying to remove the hostapd init file as I'll handle startup of it 
on my own. I've created a .bbappend file in my layer to do this:

    do_install_append() {
         rm -rf ${D}${sysconfdir}/init.d
    }

However, this results in a compilation warning when building my image 
and the ipk-postinst is still being run on my target:

    WARNING: tlt-image-1.0-r0 do_rootfs: hostapd.postinst returned 1,
    marking as unpacked only, configuration required on target.
    WARNING: tlt-image-1.0-r0 do_rootfs: Intentionally failing
    postinstall scriptlets of ['hostapd'] to defer them to first boot is
    deprecated. Please place them into pkg_postinst_ontarget_${PN} ().
    If deferring to first boot wasn't the intent, then scriptlet failure
    may mean an issue in the recipe, or a regression elsewhere.
    Details of the failure are in
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/log.do_rootfs.
    WARNING: tlt-image-1.0-r0 do_rootfs: [log_check] tlt-image: found 1
    warning message in the logfile:
    [log_check] WARNING: Intentionally failing postinstall scriptlets of
    ['hostapd'] to defer them to first boot is deprecated. Please place
    them into pkg_postinst_ontarget_${PN} ().


I tried setting INITSCRIPT_NAME to "" in my .bbappend, but it fails with 
an error during do_rootfs task of my image:

    cat
    build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/log.do_rootfs.24919
    | grep hostapd
    NOTE: Found hostapd-dbg_2.6-r0_armv7ahf-neon.ipk in Packages, but
    mtime differs - re-reading
    Found hostapd-dev_2.6-r0_armv7ahf-neon.ipk in Packages, but mtime
    differs - re-reading
    Found hostapd_2.6-r0_armv7ahf-neon.ipk in Packages, but mtime
    differs - re-reading
    NOTE: Installing the following packages: android-system-core-adbd
    android-system-core-liblog android-system-core-usb ap6212 avlcommd
    base-files base-passwd boot-config config-backup curl dnsmasq
    dropbear ethtool eventslog factory-restore firewall3 fsl-rc-local
    gps-control gps-utils gpsd gpsd-conf gsmd hostapd iio-utils iiod
    iproute2 iptables iputils iw kernel-modules libcutils0 libglib-2.0-0
    libnl-3-200 libstdc++6 libtlt-lua libxml2 lsm6dsl-rebind lsqlite3
    luci lucihttp mnf-info motion-monitor mtd-utils-ubifs netifd openssl
    os-release packagegroup-core-boot perl ppp preinit procd qmuxd
    recgend rpcd run-postinsts shadow sms-utilities sqlite3 storage
    sysntpd system sysup tlt-base-files tlt-connection-manager
    tlt-eventslog-lua tzdata ubus uhttpd update-rc.d ustream-ssl
    NOTE:
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/recipe-sysroot-native/usr/bin/opkg
    --volatile-cache -f
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/opkg.conf
    -t
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/ipktemp/
    -o
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/rootfs
    --force_postinstall --prefer-arch-to-version
    --no-install-recommends  --force-overwrite install
    android-system-core-adbd android-system-core-liblog
    android-system-core-usb ap6212 avlcommd base-files base-passwd
    boot-config config-backup curl dnsmasq dropbear ethtool eventslog
    factory-restore firewall3 fsl-rc-local gps-control gps-utils gpsd
    gpsd-conf gsmd hostapd iio-utils iiod iproute2 iptables iputils iw
    kernel-modules libcutils0 libglib-2.0-0 libnl-3-200 libstdc++6
    libtlt-lua libxml2 lsm6dsl-rebind lsqlite3 luci lucihttp mnf-info
    motion-monitor mtd-utils-ubifs netifd openssl os-release
    packagegroup-core-boot perl ppp preinit procd qmuxd recgend rpcd
    run-postinsts shadow sms-utilities sqlite3 storage sysntpd system
    sysup tlt-base-files tlt-connection-manager tlt-eventslog-lua tzdata
    ubus uhttpd update-rc.d ustream-ssl
    ERROR: Unable to install packages. Command
    '/home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/recipe-sysroot-native/usr/bin/opkg
    --volatile-cache -f
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/opkg.conf
    -t
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/ipktemp/
    -o
    /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/rootfs
    --force_postinstall --prefer-arch-to-version
    --no-install-recommends  --force-overwrite install
    android-system-core-adbd android-system-core-liblog
    android-system-core-usb ap6212 avlcommd base-files base-passwd
    boot-config config-backup curl dnsmasq dropbear ethtool eventslog
    factory-restore firewall3 fsl-rc-local gps-control gps-utils gpsd
    gpsd-conf gsmd hostapd iio-utils iiod iproute2 iptables iputils iw
    kernel-modules libcutils0 libglib-2.0-0 libnl-3-200 libstdc++6
    libtlt-lua libxml2 lsm6dsl-rebind lsqlite3 luci lucihttp mnf-info
    motion-monitor mtd-utils-ubifs netifd openssl os-release
    packagegroup-core-boot perl ppp preinit procd qmuxd recgend rpcd
    run-postinsts shadow sms-utilities sqlite3 storage sysntpd system
    sysup tlt-base-files tlt-connection-manager tlt-eventslog-lua tzdata
    ubus uhttpd update-rc.d ustream-ssl' returned 255:
    Installing hostapd (2.6) on root
    Downloading
    file:/home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/deploy/ipk/armv7ahf-neon/hostapd_2.6-r0_armv7ahf-neon.ipk.
    To remove package debris, try `opkg remove hostapd`.
    To re-attempt the install, try `opkg install hostapd`.
      * preinst_configure: Aborting installation of hostapd.

Any pointers of how I could accomplish my goal?



[-- Attachment #2: Type: text/html, Size: 7019 bytes --]

Re: Removing hostapd init file

[Uwe Geuder]

On Tue, Oct 23, 2018 at 9:14 AM Kristupas Savickas kristupas.savickas-at-teltonika.lt wrote:
>
> Greetings,
>
> I'm trying to remove the hostapd init file as I'll handle startup of it on my own. I've created a .bbappend file in my layer to do this:
>
> do_install_append() {
>     rm -rf ${D}${sysconfdir}/init.d
> }
>
> However, this results in a compilation warning when building my image
> and the ipk-postinst is still being run on my target:
[...]
> I tried setting INITSCRIPT_NAME to "" in my .bbappend, but it fails
> with an error during do_rootfs task of my image:
[...]

I guess the problem is that the recipe inherits update-rc.d class and
that class wants to work with the init script. Unfortunately
uninheriting a class in a bbappend is not possible AFAIK. I am not
familiar with the details of the class whether there is a way to tell it
to do nothing.
 
> Any pointers of how I could accomplish my goal?
>

What about 

  do_install_append() {
      (echo "#!/bin/sh" ; echo true) > ${D}${sysconfdir}/init.d/hostapd    
  }


Just guessing. Untested and I have not worked with sysv init for
years... Maybe update-rc.d requires the typcial comment section at the
beginning. If so you just add it. 

Or actually if update-rc.d refers to the comment section in the
beginning of the script you could add a patch that changes the
Default-Start: value to empty (or some runlevel you do not use).

Regards,

Uwe Geuder
Neuro Event Labs Oy
Tampere, Finland
uwe.gexder at neuroeventlabs.com (Bot check: fix one obvious typo)

Re: Removing hostapd init file

[Joshua Watt]

[-- Attachment #1: Type: text/plain, Size: 7490 bytes --]

On Tue, 2018-10-23 at 09:03 +0300, Kristupas Savickas wrote:
>     Greetings,
>     I'm trying to remove the hostapd init file as I'll handle startup
>       of it on my own. I've created a .bbappend file in my layer to
> do
>       this:
>     
> >       do_install_append() {
> > 
> >             rm -rf ${D}${sysconfdir}/init.d
> > 
> >         }
> > 
> >       
> >     
> 
>     However, this results in a compilation warning when building my
>       image and the ipk-postinst is still being run on my target:
>     
> >       WARNING: tlt-image-1.0-r0 do_rootfs: hostapd.postinst
> > returned
> >         1, marking as unpacked only, configuration required on
> > target.
> > 
> >         WARNING: tlt-image-1.0-r0 do_rootfs: Intentionally failing
> >         postinstall scriptlets of ['hostapd'] to defer them to
> > first
> >         boot is deprecated. Please place them into
> >         pkg_postinst_ontarget_${PN} ().
> > 
> >         If deferring to first boot wasn't the intent, then
> > scriptlet
> >         failure may mean an issue in the recipe, or a regression
> >         elsewhere.
> > 
> >         Details of the failure are in
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-
> > r0/temp/log.do_rootfs.
> > 
> >         WARNING: tlt-image-1.0-r0 do_rootfs: [log_check] tlt-image:
> >         found 1 warning message in the logfile:
> > 
> >         [log_check] WARNING: Intentionally failing postinstall
> >         scriptlets of ['hostapd'] to defer them to first boot is
> >         deprecated. Please place them into
> > pkg_postinst_ontarget_${PN}
> >         ().
> >       
> > 
> >       
> >     
> 
>     I tried setting INITSCRIPT_NAME to "" in my .bbappend, but it
>       fails with an error during do_rootfs task of my image:
>     
> > cat
> > build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-
> > r0/temp/log.do_rootfs.24919
> >       | grep hostapd
> > 
> >       NOTE: Found hostapd-dbg_2.6-r0_armv7ahf-neon.ipk in Packages,
> > but
> >       mtime differs - re-reading
> > 
> >       Found hostapd-dev_2.6-r0_armv7ahf-neon.ipk in Packages, but
> > mtime
> >       differs - re-reading
> > 
> >       Found hostapd_2.6-r0_armv7ahf-neon.ipk in Packages, but mtime
> >       differs - re-reading
> > 
> >       NOTE: Installing the following packages: android-system-core-
> > adbd
> >       android-system-core-liblog android-system-core-usb ap6212
> > avlcommd
> >       base-files base-passwd boot-config config-backup curl dnsmasq
> >       dropbear ethtool eventslog factory-restore firewall3 fsl-rc-
> > local
> >       gps-control gps-utils gpsd gpsd-conf gsmd hostapd iio-utils
> > iiod
> >       iproute2 iptables iputils iw kernel-modules libcutils0
> >       libglib-2.0-0 libnl-3-200 libstdc++6 libtlt-lua libxml2
> >       lsm6dsl-rebind lsqlite3 luci lucihttp mnf-info motion-monitor
> >       mtd-utils-ubifs netifd openssl os-release packagegroup-core-
> > boot
> >       perl ppp preinit procd qmuxd recgend rpcd run-postinsts
> > shadow
> >       sms-utilities sqlite3 storage sysntpd system sysup tlt-base-
> > files
> >       tlt-connection-manager tlt-eventslog-lua tzdata ubus uhttpd
> >       update-rc.d ustream-ssl
> > 
> >       NOTE:
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/recipe-sysroot-
> > native/usr/bin/opkg
> >       --volatile-cache -f
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/opkg.conf
> >       -t
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/ipktemp/
> >       -o
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/rootfs 
> >       --force_postinstall --prefer-arch-to-version
> >       --no-install-recommends  --force-overwrite install
> >       android-system-core-adbd android-system-core-liblog
> >       android-system-core-usb ap6212 avlcommd base-files base-
> > passwd
> >       boot-config config-backup curl dnsmasq dropbear ethtool
> > eventslog
> >       factory-restore firewall3 fsl-rc-local gps-control gps-utils
> > gpsd
> >       gpsd-conf gsmd hostapd iio-utils iiod iproute2 iptables
> > iputils iw
> >       kernel-modules libcutils0 libglib-2.0-0 libnl-3-200
> > libstdc++6
> >       libtlt-lua libxml2 lsm6dsl-rebind lsqlite3 luci lucihttp mnf-
> > info
> >       motion-monitor mtd-utils-ubifs netifd openssl os-release
> >       packagegroup-core-boot perl ppp preinit procd qmuxd recgend
> > rpcd
> >       run-postinsts shadow sms-utilities sqlite3 storage sysntpd
> > system
> >       sysup tlt-base-files tlt-connection-manager tlt-eventslog-lua
> >       tzdata ubus uhttpd update-rc.d ustream-ssl
> > 
> >       ERROR: Unable to install packages. Command
> > '/home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/recipe-sysroot-
> > native/usr/bin/opkg
> >       --volatile-cache -f
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/opkg.conf
> >       -t
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/ipktemp/
> >       -o
> > /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/rootfs 
> >       --force_postinstall --prefer-arch-to-version
> >       --no-install-recommends  --force-overwrite install
> >       android-system-core-adbd android-system-core-liblog
> >       android-system-core-usb ap6212 avlcommd base-files base-
> > passwd
> >       boot-config config-backup curl dnsmasq dropbear ethtool
> > eventslog
> >       factory-restore firewall3 fsl-rc-local gps-control gps-utils
> > gpsd
> >       gpsd-conf gsmd hostapd iio-utils iiod iproute2 iptables
> > iputils iw
> >       kernel-modules libcutils0 libglib-2.0-0 libnl-3-200
> > libstdc++6
> >       libtlt-lua libxml2 lsm6dsl-rebind lsqlite3 luci lucihttp mnf-
> > info
> >       motion-monitor mtd-utils-ubifs netifd openssl os-release
> >       packagegroup-core-boot perl ppp preinit procd qmuxd recgend
> > rpcd
> >       run-postinsts shadow sms-utilities sqlite3 storage sysntpd
> > system
> >       sysup tlt-base-files tlt-connection-manager tlt-eventslog-lua
> >       tzdata ubus uhttpd update-rc.d ustream-ssl' returned 255:
> > 
> >       Installing hostapd (2.6) on root
> > 
> >       Downloading
> > file:/home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-
> > glibc/deploy/ipk/armv7ahf-neon/hostapd_2.6-r0_armv7ahf-neon.ipk.
> > 
> >       To remove package debris, try `opkg remove hostapd`.
> > 
> >       To re-attempt the install, try `opkg install hostapd`.
> > 
> >        * preinst_configure: Aborting installation of hostapd.
> > 
> >     
> 
>     Any pointers of how I could accomplish my goal?
> 
>     
>     
> 
>     
>   
> 

We override INITSCRIPT_PARAMS in a bbappend like so:

 INITSCRIPT_PARAMS = "stop 20 0 1 0 ."

Seems to work OK.


-- 
Joshua Watt <JPEWhacker@gmail.com>

[-- Attachment #2: Type: text/html, Size: 7830 bytes --]

Re: Removing hostapd init file

[Darcy Watkins]

[-- Attachment #1: Type: text/plain, Size: 7326 bytes --]

Hi,

I have tried schemes like these and found that although they appear to work during rootfs generation, it can result in RPM transaction failures if you try to perform in-place upgrades using RPMs.  The post install scriptlets can fail as they attempt to run the update-rc.d command, passing bad (or missing) parms.

Fortunately for this particular case there is a hook variable that is used to leep sysvinit out of the way when using system (or other alternative).  I fixed it by adding the following to my bbappend…

  INHIBIT_UPDATERCD_BBCLASS = “1”



Regards,

Darcy

Darcy Watkins ::  Senior Staff Engineer, Firmware

SIERRA WIRELESS
Direct  +1 604 233 7989   ::  Fax  +1 604 231 1109  ::  Main  +1 604 231 1100
13811 Wireless Way  :: Richmond, BC Canada V6V 3A4
[P2]
dwatkins@sierrawireless.com<mailto:dwatkins@sierrawireless.com> :: www.sierrawireless.com<http://www.sierrawireless.com/>

From: yocto-bounces@yoctoproject.org <yocto-bounces@yoctoproject.org> On Behalf Of Joshua Watt
Sent: November-01-18 10:39 AM
To: Kristupas Savickas <kristupas.savickas@teltonika.lt>; yocto@yoctoproject.org
Subject: Re: [yocto] Removing hostapd init file

On Tue, 2018-10-23 at 09:03 +0300, Kristupas Savickas wrote:

Greetings,

I'm trying to remove the hostapd init file as I'll handle startup of it on my own. I've created a .bbappend file in my layer to do this:

do_install_append() {
    rm -rf ${D}${sysconfdir}/init.d
}

However, this results in a compilation warning when building my image and the ipk-postinst is still being run on my target:

WARNING: tlt-image-1.0-r0 do_rootfs: hostapd.postinst returned 1, marking as unpacked only, configuration required on target.
WARNING: tlt-image-1.0-r0 do_rootfs: Intentionally failing postinstall scriptlets of ['hostapd'] to defer them to first boot is deprecated. Please place them into pkg_postinst_ontarget_${PN} ().
If deferring to first boot wasn't the intent, then scriptlet failure may mean an issue in the recipe, or a regression elsewhere.
Details of the failure are in /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/log.do_rootfs.
WARNING: tlt-image-1.0-r0 do_rootfs: [log_check] tlt-image: found 1 warning message in the logfile:
[log_check] WARNING: Intentionally failing postinstall scriptlets of ['hostapd'] to defer them to first boot is deprecated. Please place them into pkg_postinst_ontarget_${PN} ().



I tried setting INITSCRIPT_NAME to "" in my .bbappend, but it fails with an error during do_rootfs task of my image:
cat build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/log.do_rootfs.24919 | grep hostapd
NOTE: Found hostapd-dbg_2.6-r0_armv7ahf-neon.ipk in Packages, but mtime differs - re-reading
Found hostapd-dev_2.6-r0_armv7ahf-neon.ipk in Packages, but mtime differs - re-reading
Found hostapd_2.6-r0_armv7ahf-neon.ipk in Packages, but mtime differs - re-reading
NOTE: Installing the following packages: android-system-core-adbd android-system-core-liblog android-system-core-usb ap6212 avlcommd base-files base-passwd boot-config config-backup curl dnsmasq dropbear ethtool eventslog factory-restore firewall3 fsl-rc-local gps-control gps-utils gpsd gpsd-conf gsmd hostapd iio-utils iiod iproute2 iptables iputils iw kernel-modules libcutils0 libglib-2.0-0 libnl-3-200 libstdc++6 libtlt-lua libxml2 lsm6dsl-rebind lsqlite3 luci lucihttp mnf-info motion-monitor mtd-utils-ubifs netifd openssl os-release packagegroup-core-boot perl ppp preinit procd qmuxd recgend rpcd run-postinsts shadow sms-utilities sqlite3 storage sysntpd system sysup tlt-base-files tlt-connection-manager tlt-eventslog-lua tzdata ubus uhttpd update-rc.d ustream-ssl
NOTE: /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/recipe-sysroot-native/usr/bin/opkg --volatile-cache -f /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/opkg.conf -t /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/ipktemp/ -o /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/rootfs  --force_postinstall --prefer-arch-to-version --no-install-recommends  --force-overwrite install android-system-core-adbd android-system-core-liblog android-system-core-usb ap6212 avlcommd base-files base-passwd boot-config config-backup curl dnsmasq dropbear ethtool eventslog factory-restore firewall3 fsl-rc-local gps-control gps-utils gpsd gpsd-conf gsmd hostapd iio-utils iiod iproute2 iptables iputils iw kernel-modules libcutils0 libglib-2.0-0 libnl-3-200 libstdc++6 libtlt-lua libxml2 lsm6dsl-rebind lsqlite3 luci lucihttp mnf-info motion-monitor mtd-utils-ubifs netifd openssl os-release packagegroup-core-boot perl ppp preinit procd qmuxd recgend rpcd run-postinsts shadow sms-utilities sqlite3 storage sysntpd system sysup tlt-base-files tlt-connection-manager tlt-eventslog-lua tzdata ubus uhttpd update-rc.d ustream-ssl
ERROR: Unable to install packages. Command '/home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/recipe-sysroot-native/usr/bin/opkg --volatile-cache -f /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/opkg.conf -t /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/temp/ipktemp/ -o /home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/work/fml001-oe-linux-gnueabi/tlt-image/1.0-r0/rootfs  --force_postinstall --prefer-arch-to-version --no-install-recommends  --force-overwrite install android-system-core-adbd android-system-core-liblog android-system-core-usb ap6212 avlcommd base-files base-passwd boot-config config-backup curl dnsmasq dropbear ethtool eventslog factory-restore firewall3 fsl-rc-local gps-control gps-utils gpsd gpsd-conf gsmd hostapd iio-utils iiod iproute2 iptables iputils iw kernel-modules libcutils0 libglib-2.0-0 libnl-3-200 libstdc++6 libtlt-lua libxml2 lsm6dsl-rebind lsqlite3 luci lucihttp mnf-info motion-monitor mtd-utils-ubifs netifd openssl os-release packagegroup-core-boot perl ppp preinit procd qmuxd recgend rpcd run-postinsts shadow sms-utilities sqlite3 storage sysntpd system sysup tlt-base-files tlt-connection-manager tlt-eventslog-lua tzdata ubus uhttpd update-rc.d ustream-ssl' returned 255:
Installing hostapd (2.6) on root
Downloading file:/home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/deploy/ipk/armv7ahf-neon/hostapd_2.6-r0_armv7ahf-neon.ipk<file://home/kristupas/projects/fml-linux-sdk-qtel/oe-core/build/tmp-glibc/deploy/ipk/armv7ahf-neon/hostapd_2.6-r0_armv7ahf-neon.ipk>.
To remove package debris, try `opkg remove hostapd`.
To re-attempt the install, try `opkg install hostapd`.
 * preinst_configure: Aborting installation of hostapd.

Any pointers of how I could accomplish my goal?



We override INITSCRIPT_PARAMS in a bbappend like so:

INITSCRIPT_PARAMS = "stop 20 0 1 0 ."

Seems to work OK.


--
Joshua Watt <JPEWhacker@gmail.com<mailto:JPEWhacker@gmail.com>>

[-- Attachment #2: Type: text/html, Size: 15098 bytes --]