* State of current Xen debugger @ 2010-09-14 14:22 Roger Cruz 2010-09-14 14:30 ` Tim Deegan 0 siblings, 1 reply; 13+ messages in thread From: Roger Cruz @ 2010-09-14 14:22 UTC (permalink / raw) To: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 625 bytes --] I am trying to debug a problem where the hypervisor is hanging hard. Not even the NMI watchdog is triggering a reboot. So I wanted to hook up a debugger. What is the state of the current debuggers out there? Any input on how I should set it up (kdb, gdb, etc) and pointers to a good wiki page are much appreciated. I did perform a Google search and found some links but I want to hear from the current developers as to what is most stable and useful for debugging this type of hard hang. I only have a serial port PCI-express card to use as the laptop has no built in port. Thank you in advance. Roger R. Cruz [-- Attachment #1.2: Type: text/html, Size: 1045 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: State of current Xen debugger 2010-09-14 14:22 State of current Xen debugger Roger Cruz @ 2010-09-14 14:30 ` Tim Deegan 2010-09-14 14:56 ` Roger Cruz 0 siblings, 1 reply; 13+ messages in thread From: Tim Deegan @ 2010-09-14 14:30 UTC (permalink / raw) To: Roger Cruz; +Cc: xen-devel Hi, At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: > I am trying to debug a problem where the hypervisor is hanging hard. > Not even the NMI watchdog is triggering a reboot. So I wanted to hook > up a debugger. Sorry to bring a counsel of despair but if the NMI watchdog isn't working then your chances of getting a working debugger are slim. It's likely that at least one CPU is very very stuck. Does the 'd' debug key work on the serial line when the machine is wedged? On a more cheerful note, I've twice seen hard hangs like this that turned out to be hardware issues, fixable with BIOS upgrades. Cheers, Tim. > What is the state of the current debuggers out there? > Any input on how I should set it up (kdb, gdb, etc) and pointers to a > good wiki page are much appreciated. I did perform a Google search > and found some links but I want to hear from the current developers as > to what is most stable and useful for debugging this type of hard > hang. I only have a serial port PCI-express card to use as the laptop > has no built in port. -- Tim Deegan <Tim.Deegan@citrix.com> Principal Software Engineer, XenServer Engineering Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: State of current Xen debugger 2010-09-14 14:30 ` Tim Deegan @ 2010-09-14 14:56 ` Roger Cruz 2010-09-14 15:19 ` Dan Magenheimer 2010-09-14 15:20 ` Tim Deegan 0 siblings, 2 replies; 13+ messages in thread From: Roger Cruz @ 2010-09-14 14:56 UTC (permalink / raw) To: Tim Deegan; +Cc: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 2389 bytes --] Hi Tim, good to hear from you again I had a pretty good inkling that one of you hardcore developers would say that :-) Yes, it is pretty well wedged. I can cause the problem more rapidly by dropping to a single CPU. When the hang happens, the Xen console is completely dead. None of the special keys work. I do have hopes a BIOS upgrade could fix this as a last resort but I want to see if at least I can understand the problem. We have a few different machines that are exhibiting similar symptoms so I have to see if I can find a work-around without requiring every user to upgrade their BIOS :-( Just in case, what debugger have you been using? Are there recent instructions on how to set it up that you can point me to? Thanks Roger -----Original Message----- From: Tim Deegan [mailto:Tim.Deegan@citrix.com] Sent: Tue 9/14/2010 10:30 AM To: Roger Cruz Cc: xen-devel@lists.xensource.com Subject: Re: [Xen-devel] State of current Xen debugger Hi, At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: > I am trying to debug a problem where the hypervisor is hanging hard. > Not even the NMI watchdog is triggering a reboot. So I wanted to hook > up a debugger. Sorry to bring a counsel of despair but if the NMI watchdog isn't working then your chances of getting a working debugger are slim. It's likely that at least one CPU is very very stuck. Does the 'd' debug key work on the serial line when the machine is wedged? On a more cheerful note, I've twice seen hard hangs like this that turned out to be hardware issues, fixable with BIOS upgrades. Cheers, Tim. > What is the state of the current debuggers out there? > Any input on how I should set it up (kdb, gdb, etc) and pointers to a > good wiki page are much appreciated. I did perform a Google search > and found some links but I want to hear from the current developers as > to what is most stable and useful for debugging this type of hard > hang. I only have a serial port PCI-express card to use as the laptop > has no built in port. -- Tim Deegan <Tim.Deegan@citrix.com> Principal Software Engineer, XenServer Engineering Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 [-- Attachment #1.2: Type: text/html, Size: 3138 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: State of current Xen debugger 2010-09-14 14:56 ` Roger Cruz @ 2010-09-14 15:19 ` Dan Magenheimer 2010-09-14 15:54 ` Roger Cruz 2010-09-14 15:20 ` Tim Deegan 1 sibling, 1 reply; 13+ messages in thread From: Dan Magenheimer @ 2010-09-14 15:19 UTC (permalink / raw) To: Roger Cruz, Tim Deegan; +Cc: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 2935 bytes --] A couple of thoughts: Have you tried max_cstate=0 (as a Xen boot option)? Also, you didn't say what version of Xen you are using but playing around with hpet_broadcast (enabling it or force-disabling it as below) might be worth a try. http://lists.xensource.com/archives/html/xen-devel/2010-09/msg00556.html From: Roger Cruz [mailto:roger.cruz@virtualcomputer.com] Sent: Tuesday, September 14, 2010 8:56 AM To: Tim Deegan Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] State of current Xen debugger Hi Tim, good to hear from you again I had a pretty good inkling that one of you hardcore developers would say that :-) Yes, it is pretty well wedged. I can cause the problem more rapidly by dropping to a single CPU. When the hang happens, the Xen console is completely dead. None of the special keys work. I do have hopes a BIOS upgrade could fix this as a last resort but I want to see if at least I can understand the problem. We have a few different machines that are exhibiting similar symptoms so I have to see if I can find a work-around without requiring every user to upgrade their BIOS :-( Just in case, what debugger have you been using? Are there recent instructions on how to set it up that you can point me to? Thanks Roger -----Original Message----- From: Tim Deegan [mailto:Tim.Deegan@citrix.com] Sent: Tue 9/14/2010 10:30 AM To: Roger Cruz Cc: xen-devel@lists.xensource.com Subject: Re: [Xen-devel] State of current Xen debugger Hi, At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: > I am trying to debug a problem where the hypervisor is hanging hard. > Not even the NMI watchdog is triggering a reboot. So I wanted to hook > up a debugger. Sorry to bring a counsel of despair but if the NMI watchdog isn't working then your chances of getting a working debugger are slim. It's likely that at least one CPU is very very stuck. Does the 'd' debug key work on the serial line when the machine is wedged? On a more cheerful note, I've twice seen hard hangs like this that turned out to be hardware issues, fixable with BIOS upgrades. Cheers, Tim. > What is the state of the current debuggers out there? > Any input on how I should set it up (kdb, gdb, etc) and pointers to a > good wiki page are much appreciated. I did perform a Google search > and found some links but I want to hear from the current developers as > to what is most stable and useful for debugging this type of hard > hang. I only have a serial port PCI-express card to use as the laptop > has no built in port. -- Tim Deegan <Tim.Deegan@citrix.com> Principal Software Engineer, XenServer Engineering Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 [-- Attachment #1.2: Type: text/html, Size: 6897 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: State of current Xen debugger 2010-09-14 15:19 ` Dan Magenheimer @ 2010-09-14 15:54 ` Roger Cruz 2010-09-15 14:19 ` Roger Cruz 2010-09-28 15:21 ` Roger Cruz 0 siblings, 2 replies; 13+ messages in thread From: Roger Cruz @ 2010-09-14 15:54 UTC (permalink / raw) To: Dan Magenheimer, Tim Deegan; +Cc: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 3520 bytes --] Hi Dan, I am using 3.4.2 where we have made very minor modifications (some backports, for example). I have not tried your suggestions.. so I will do that next.. thanks! R. -----Original Message----- From: Dan Magenheimer [mailto:dan.magenheimer@oracle.com] Sent: Tue 9/14/2010 11:19 AM To: Roger Cruz; Tim Deegan Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] State of current Xen debugger A couple of thoughts: Have you tried max_cstate=0 (as a Xen boot option)? Also, you didn't say what version of Xen you are using but playing around with hpet_broadcast (enabling it or force-disabling it as below) might be worth a try. http://lists.xensource.com/archives/html/xen-devel/2010-09/msg00556.html From: Roger Cruz [mailto:roger.cruz@virtualcomputer.com] Sent: Tuesday, September 14, 2010 8:56 AM To: Tim Deegan Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] State of current Xen debugger Hi Tim, good to hear from you again I had a pretty good inkling that one of you hardcore developers would say that :-) Yes, it is pretty well wedged. I can cause the problem more rapidly by dropping to a single CPU. When the hang happens, the Xen console is completely dead. None of the special keys work. I do have hopes a BIOS upgrade could fix this as a last resort but I want to see if at least I can understand the problem. We have a few different machines that are exhibiting similar symptoms so I have to see if I can find a work-around without requiring every user to upgrade their BIOS :-( Just in case, what debugger have you been using? Are there recent instructions on how to set it up that you can point me to? Thanks Roger -----Original Message----- From: Tim Deegan [mailto:Tim.Deegan@citrix.com] Sent: Tue 9/14/2010 10:30 AM To: Roger Cruz Cc: xen-devel@lists.xensource.com Subject: Re: [Xen-devel] State of current Xen debugger Hi, At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: > I am trying to debug a problem where the hypervisor is hanging hard. > Not even the NMI watchdog is triggering a reboot. So I wanted to hook > up a debugger. Sorry to bring a counsel of despair but if the NMI watchdog isn't working then your chances of getting a working debugger are slim. It's likely that at least one CPU is very very stuck. Does the 'd' debug key work on the serial line when the machine is wedged? On a more cheerful note, I've twice seen hard hangs like this that turned out to be hardware issues, fixable with BIOS upgrades. Cheers, Tim. > What is the state of the current debuggers out there? > Any input on how I should set it up (kdb, gdb, etc) and pointers to a > good wiki page are much appreciated. I did perform a Google search > and found some links but I want to hear from the current developers as > to what is most stable and useful for debugging this type of hard > hang. I only have a serial port PCI-express card to use as the laptop > has no built in port. -- Tim Deegan <Tim.Deegan@citrix.com> Principal Software Engineer, XenServer Engineering Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 [-- Attachment #1.2: Type: text/html, Size: 4626 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: State of current Xen debugger 2010-09-14 15:54 ` Roger Cruz @ 2010-09-15 14:19 ` Roger Cruz 2010-09-28 15:21 ` Roger Cruz 1 sibling, 0 replies; 13+ messages in thread From: Roger Cruz @ 2010-09-15 14:19 UTC (permalink / raw) To: Roger Cruz, Dan Magenheimer, Tim Deegan; +Cc: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 8220 bytes --] Hi Dan, I tried both of your suggestions here and I am still seeing a hang. The only clue that I have to go on now is why the print statements that I have placed in the nmi tick handler do not continue to come at a regular 1 second interval. My expectation is that they come at a regular rate and it seems like upon boot, it does up to the 39th second. See the output below where curr_sum comes from the nmi_timer_ticks variable. After the 39th tick, the messages are printed at different intervals... anywhere between 2-20 seconds. Does Xen adjust the NMI interval rate? I know that the NMIs are programmed based on the CPU cycles, so what I did was disabled SpeedStep to make sure that the processor speed is not adjusted and the symptoms are still identical. Any other ideas? Regards, Roger R. Cruz void nmi_watchdog_tick(struct cpu_user_regs * regs) { unsigned int sum = this_cpu(nmi_timer_ticks); HEDLEY-T500 login: (XEN) [23:29:04] 17213**** CPU0, counter=0, last_sum=25, curr_sum=27, hz=10, nmis=36 (XEN) [23:29:05] 17298**** CPU0, counter=0, last_sum=27, curr_sum=28, hz=10, nmis=37 (XEN) [23:29:06] 17383**** CPU0, counter=0, last_sum=28, curr_sum=29, hz=10, nmis=38 (XEN) [23:29:06] 17468mm.c:806:d0 Error getting mfn 100 (pfn 3ff0) from L1 entry 8000000000100625 for l1e_owner=0, pg_owner=32753 (XEN) [23:29:07] 17598**** CPU0, counter=0, last_sum=29, curr_sum=29, hz=10, nmis=39 (XEN) [23:29:08] 17683**** CPU0, counter=1, last_sum=29, curr_sum=30, hz=10, nmis=40 (XEN) [23:29:08] 17768**** CPU0, counter=0, last_sum=30, curr_sum=31, hz=10, nmis=41 (XEN) [23:29:09] 17853**** CPU0, counter=0, last_sum=31, curr_sum=32, hz=10, nmis=42 mapping kernel into physical memory about to get started... (XEN) [23:29:10] 17938**** CPU0, counter=0, last_sum=32, curr_sum=32, hz=10, nmis=43 (XEN) [23:29:10] 18023**** CPU0, counter=1, last_sum=32, curr_sum=33, hz=10, nmis=44 (XEN) [23:29:11] 18108**** CPU0, counter=0, last_sum=33, curr_sum=34, hz=10, nmis=45 (XEN) [23:29:12] 18193**** CPU0, counter=0, last_sum=34, curr_sum=34, hz=10, nmis=46 (XEN) [23:29:13] 18278**** CPU0, counter=1, last_sum=34, curr_sum=35, hz=10, nmis=47 (XEN) [23:29:13] 18363**** CPU0, counter=0, last_sum=35, curr_sum=36, hz=10, nmis=48 (XEN) [23:29:15] 18448**** CPU0, counter=0, last_sum=36, curr_sum=38, hz=10, nmis=49 (XEN) [23:29:16] 18533**** CPU0, counter=0, last_sum=38, curr_sum=39, hz=10, nmis=50 (XEN) [23:29:18] 18618**** CPU0, counter=0, last_sum=39, curr_sum=41, hz=10, nmis=51 (XEN) [23:29:21] 18703**** CPU0, counter=0, last_sum=41, curr_sum=43, hz=10, nmis=52 (XEN) [23:29:27] 18788**** CPU0, counter=0, last_sum=43, curr_sum=49, hz=10, nmis=53 (XEN) [23:29:34] 18873**** CPU0, counter=0, last_sum=49, curr_sum=56, hz=10, nmis=54 (XEN) [23:29:39] 18958**** CPU0, counter=0, last_sum=56, curr_sum=61, hz=10, nmis=55 (XEN) [23:29:43] 19043**** CPU0, counter=0, last_sum=61, curr_sum=66, hz=10, nmis=56 (XEN) [23:29:47] 19128**** CPU0, counter=0, last_sum=66, curr_sum=69, hz=10, nmis=57 (XEN) [23:29:50] 19213**** CPU0, counter=0, last_sum=69, curr_sum=73, hz=10, nmis=58 (XEN) [23:29:54] 19298**** CPU0, counter=0, last_sum=73, curr_sum=77, hz=10, nmis=59 (XEN) [23:29:58] 19383**** CPU0, counter=0, last_sum=77, curr_sum=80, hz=10, nmis=60 (XEN) [23:30:01] 19468**** CPU0, counter=0, last_sum=80, curr_sum=83, hz=10, nmis=61 (XEN) [23:30:04] 19553**** CPU0, counter=0, last_sum=83, curr_sum=87, hz=10, nmis=62 (XEN) [23:30:08] 19638**** CPU0, counter=0, last_sum=87, curr_sum=91, hz=10, nmis=63 (XEN) [23:30:11] 19723**** CPU0, counter=0, last_sum=91, curr_sum=94, hz=10, nmis=64 (XEN) [23:30:13] 19808**** CPU0, counter=0, last_sum=94, curr_sum=96, hz=10, nmis=65 (XEN) [23:30:16] 19893**** CPU0, counter=0, last_sum=96, curr_sum=99, hz=10, nmis=66 (XEN) [23:30:19] 19978**** CPU0, counter=0, last_sum=99, curr_sum=102, hz=10, nmis=67 (XEN) [23:30:22] 20064**** CPU0, counter=0, last_sum=102, curr_sum=105, hz=10, nmis=68 (XEN) [23:30:25] 20151**** CPU0, counter=0, last_sum=105, curr_sum=108, hz=10, nmis=69 (XEN) [23:30:28] 20238**** CPU0, counter=0, last_sum=108, curr_sum=111, hz=10, nmis=70 From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Roger Cruz Sent: Tuesday, September 14, 2010 11:55 AM To: Dan Magenheimer; Tim Deegan Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] State of current Xen debugger Hi Dan, I am using 3.4.2 where we have made very minor modifications (some backports, for example). I have not tried your suggestions.. so I will do that next.. thanks! R. -----Original Message----- From: Dan Magenheimer [mailto:dan.magenheimer@oracle.com] Sent: Tue 9/14/2010 11:19 AM To: Roger Cruz; Tim Deegan Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] State of current Xen debugger A couple of thoughts: Have you tried max_cstate=0 (as a Xen boot option)? Also, you didn't say what version of Xen you are using but playing around with hpet_broadcast (enabling it or force-disabling it as below) might be worth a try. http://lists.xensource.com/archives/html/xen-devel/2010-09/msg00556.html From: Roger Cruz [mailto:roger.cruz@virtualcomputer.com] Sent: Tuesday, September 14, 2010 8:56 AM To: Tim Deegan Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] State of current Xen debugger Hi Tim, good to hear from you again I had a pretty good inkling that one of you hardcore developers would say that :-) Yes, it is pretty well wedged. I can cause the problem more rapidly by dropping to a single CPU. When the hang happens, the Xen console is completely dead. None of the special keys work. I do have hopes a BIOS upgrade could fix this as a last resort but I want to see if at least I can understand the problem. We have a few different machines that are exhibiting similar symptoms so I have to see if I can find a work-around without requiring every user to upgrade their BIOS :-( Just in case, what debugger have you been using? Are there recent instructions on how to set it up that you can point me to? Thanks Roger -----Original Message----- From: Tim Deegan [mailto:Tim.Deegan@citrix.com] Sent: Tue 9/14/2010 10:30 AM To: Roger Cruz Cc: xen-devel@lists.xensource.com Subject: Re: [Xen-devel] State of current Xen debugger Hi, At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: > I am trying to debug a problem where the hypervisor is hanging hard. > Not even the NMI watchdog is triggering a reboot. So I wanted to hook > up a debugger. Sorry to bring a counsel of despair but if the NMI watchdog isn't working then your chances of getting a working debugger are slim. It's likely that at least one CPU is very very stuck. Does the 'd' debug key work on the serial line when the machine is wedged? On a more cheerful note, I've twice seen hard hangs like this that turned out to be hardware issues, fixable with BIOS upgrades. Cheers, Tim. > What is the state of the current debuggers out there? > Any input on how I should set it up (kdb, gdb, etc) and pointers to a > good wiki page are much appreciated. I did perform a Google search > and found some links but I want to hear from the current developers as > to what is most stable and useful for debugging this type of hard > hang. I only have a serial port PCI-express card to use as the laptop > has no built in port. -- Tim Deegan <Tim.Deegan@citrix.com> Principal Software Engineer, XenServer Engineering Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 [-- Attachment #1.2: Type: text/html, Size: 13356 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: State of current Xen debugger 2010-09-14 15:54 ` Roger Cruz 2010-09-15 14:19 ` Roger Cruz @ 2010-09-28 15:21 ` Roger Cruz 2010-09-28 15:30 ` Keir Fraser 1 sibling, 1 reply; 13+ messages in thread From: Roger Cruz @ 2010-09-28 15:21 UTC (permalink / raw) To: Roger Cruz, Dan Magenheimer, Tim Deegan; +Cc: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 4959 bytes --] I am still chasing this hard hang in our system with a modified 3.4.2 xen. I have upgraded the BIOS and the problem still exists. The only thing that so far had appeared to work was adding max_cstate=0 but now I have a report where it still hung in one customer who had that flag enabled. The rest of them have been successfully running for more than a week with this "work-around". I have isolated the problem to Lenovo with the Centrino processors. These guys will stop the TSC when in C3. What I need to really understand is why the NMI/watchdog in Xen is not working and causing a crash when the CPU hangs. I was under the impression that NMIs couldn't be masked at all. Is there anyway that Xen could be disabling or changing that behavior? I know the NMI is being driven by a timer set in the NMI handler. Could there be a case where this timer is disabled? Any ideas are welcome! Thanks Roger R. Cruz From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Roger Cruz Sent: Tuesday, September 14, 2010 11:55 AM To: Dan Magenheimer; Tim Deegan Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] State of current Xen debugger Hi Dan, I am using 3.4.2 where we have made very minor modifications (some backports, for example). I have not tried your suggestions.. so I will do that next.. thanks! R. -----Original Message----- From: Dan Magenheimer [mailto:dan.magenheimer@oracle.com] Sent: Tue 9/14/2010 11:19 AM To: Roger Cruz; Tim Deegan Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] State of current Xen debugger A couple of thoughts: Have you tried max_cstate=0 (as a Xen boot option)? Also, you didn't say what version of Xen you are using but playing around with hpet_broadcast (enabling it or force-disabling it as below) might be worth a try. http://lists.xensource.com/archives/html/xen-devel/2010-09/msg00556.html From: Roger Cruz [mailto:roger.cruz@virtualcomputer.com] Sent: Tuesday, September 14, 2010 8:56 AM To: Tim Deegan Cc: xen-devel@lists.xensource.com Subject: RE: [Xen-devel] State of current Xen debugger Hi Tim, good to hear from you again I had a pretty good inkling that one of you hardcore developers would say that :-) Yes, it is pretty well wedged. I can cause the problem more rapidly by dropping to a single CPU. When the hang happens, the Xen console is completely dead. None of the special keys work. I do have hopes a BIOS upgrade could fix this as a last resort but I want to see if at least I can understand the problem. We have a few different machines that are exhibiting similar symptoms so I have to see if I can find a work-around without requiring every user to upgrade their BIOS :-( Just in case, what debugger have you been using? Are there recent instructions on how to set it up that you can point me to? Thanks Roger -----Original Message----- From: Tim Deegan [mailto:Tim.Deegan@citrix.com] Sent: Tue 9/14/2010 10:30 AM To: Roger Cruz Cc: xen-devel@lists.xensource.com Subject: Re: [Xen-devel] State of current Xen debugger Hi, At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: > I am trying to debug a problem where the hypervisor is hanging hard. > Not even the NMI watchdog is triggering a reboot. So I wanted to hook > up a debugger. Sorry to bring a counsel of despair but if the NMI watchdog isn't working then your chances of getting a working debugger are slim. It's likely that at least one CPU is very very stuck. Does the 'd' debug key work on the serial line when the machine is wedged? On a more cheerful note, I've twice seen hard hangs like this that turned out to be hardware issues, fixable with BIOS upgrades. Cheers, Tim. > What is the state of the current debuggers out there? > Any input on how I should set it up (kdb, gdb, etc) and pointers to a > good wiki page are much appreciated. I did perform a Google search > and found some links but I want to hear from the current developers as > to what is most stable and useful for debugging this type of hard > hang. I only have a serial port PCI-express card to use as the laptop > has no built in port. -- Tim Deegan <Tim.Deegan@citrix.com> Principal Software Engineer, XenServer Engineering Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 [-- Attachment #1.2: Type: text/html, Size: 12409 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: State of current Xen debugger 2010-09-28 15:21 ` Roger Cruz @ 2010-09-28 15:30 ` Keir Fraser 2010-09-28 15:40 ` Roger Cruz 0 siblings, 1 reply; 13+ messages in thread From: Keir Fraser @ 2010-09-28 15:30 UTC (permalink / raw) To: Roger Cruz, Dan Magenheimer, Tim Deegan; +Cc: xen-devel On 28/09/2010 16:21, "Roger Cruz" <roger.cruz@virtualcomputer.com> wrote: > I am still chasing this hard hang in our system with a modified 3.4.2 xen. I > have upgraded the BIOS and the problem still exists. The only thing that so > far had appeared to work was adding max_cstate=0 but now I have a report where > it still hung in one customer who had that flag enabled. The rest of them > have been successfully running for more than a week with this ³work-around². > I have isolated the problem to Lenovo with the Centrino processors. These > guys will stop the TSC when in C3. > > What I need to really understand is why the NMI/watchdog in Xen is not working > and causing a crash when the CPU hangs. I was under the impression that NMIs > couldn¹t be masked at all. Is there anyway that Xen could be disabling or > changing that behavior? I know the NMI is being driven by a timer set in the > NMI handler. Could there be a case where this timer is disabled? Any ideas > are welcome! The NMI counter gets driven by the APIC timer. Perhaps it needs poking womehow on wakeup from C3? My suggestion for debugging this would be to take a look at what native Linux does. The NMI perfctr poking logic was all taken from (rather old now) upstream Linux. -- Keir > Thanks > Roger R. Cruz > > > > > > > > From: xen-devel-bounces@lists.xensource.com > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Roger Cruz > Sent: Tuesday, September 14, 2010 11:55 AM > To: Dan Magenheimer; Tim Deegan > Cc: xen-devel@lists.xensource.com > Subject: RE: [Xen-devel] State of current Xen debugger > > Hi Dan, > > I am using 3.4.2 where we have made very minor modifications (some backports, > for example). > > I have not tried your suggestions.. so I will do that next.. thanks! > > R. > > -----Original Message----- > From: Dan Magenheimer [mailto:dan.magenheimer@oracle.com] > Sent: Tue 9/14/2010 11:19 AM > To: Roger Cruz; Tim Deegan > Cc: xen-devel@lists.xensource.com > Subject: RE: [Xen-devel] State of current Xen debugger > > A couple of thoughts: > > > > Have you tried max_cstate=0 (as a Xen boot option)? > > > > Also, you didn't say what version of Xen you are using but playing around with > hpet_broadcast (enabling it or force-disabling it as below) might be worth a > try. > > > > http://lists.xensource.com/archives/html/xen-devel/2010-09/msg00556.html > > > > From: Roger Cruz [mailto:roger.cruz@virtualcomputer.com] > Sent: Tuesday, September 14, 2010 8:56 AM > To: Tim Deegan > Cc: xen-devel@lists.xensource.com > Subject: RE: [Xen-devel] State of current Xen debugger > > > > Hi Tim, good to hear from you again > > I had a pretty good inkling that one of you hardcore developers would say that > :-) Yes, it is pretty well wedged. I can cause the problem more rapidly by > dropping to a single CPU. When the hang happens, the Xen console is > completely dead. None of the special keys work. > > I do have hopes a BIOS upgrade could fix this as a last resort but I want to > see if at least I can understand the problem. We have a few different > machines that are exhibiting similar symptoms so I have to see if I can find a > work-around without requiring every user to upgrade their BIOS :-( > > Just in case, what debugger have you been using? Are there recent > instructions on how to set it up that you can point me to? > > Thanks > Roger > > > -----Original Message----- > From: Tim Deegan [mailto:Tim.Deegan@citrix.com] > Sent: Tue 9/14/2010 10:30 AM > To: Roger Cruz > Cc: xen-devel@lists.xensource.com > Subject: Re: [Xen-devel] State of current Xen debugger > > Hi, > > At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: >> I am trying to debug a problem where the hypervisor is hanging hard. >> Not even the NMI watchdog is triggering a reboot. So I wanted to hook >> up a debugger. > > Sorry to bring a counsel of despair but if the NMI watchdog isn't > working then your chances of getting a working debugger are slim. It's > likely that at least one CPU is very very stuck. Does the 'd' debug key > work on the serial line when the machine is wedged? > > On a more cheerful note, I've twice seen hard hangs like this that > turned out to be hardware issues, fixable with BIOS upgrades. > > Cheers, > > Tim. > >> What is the state of the current debuggers out there? >> Any input on how I should set it up (kdb, gdb, etc) and pointers to a >> good wiki page are much appreciated. I did perform a Google search >> and found some links but I want to hear from the current developers as >> to what is most stable and useful for debugging this type of hard >> hang. I only have a serial port PCI-express card to use as the laptop >> has no built in port. > > -- > Tim Deegan <Tim.Deegan@citrix.com> > Principal Software Engineer, XenServer Engineering > Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 > 02:35:00 > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 > 02:35:00 > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 > 02:35:00 > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: State of current Xen debugger 2010-09-28 15:30 ` Keir Fraser @ 2010-09-28 15:40 ` Roger Cruz 2010-09-28 17:06 ` Keir Fraser 0 siblings, 1 reply; 13+ messages in thread From: Roger Cruz @ 2010-09-28 15:40 UTC (permalink / raw) To: Keir Fraser, Dan Magenheimer, Tim Deegan; +Cc: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 8548 bytes --] By the APIC timer? When I traced this code I was under the impression that is driven by the performance counters counting cycles and generating an interrupt when the counter overflows. I found this was the routine being called to setup the watchdog static void __pminit setup_p6_watchdog(unsigned counter) { unsigned int evntsel; nmi_perfctr_msr = MSR_P6_PERFCTR0; <--- register clear_msr_range(MSR_P6_EVNTSEL0, 2); clear_msr_range(MSR_P6_PERFCTR0, 2); evntsel = P6_EVNTSEL_INT | P6_EVNTSEL_OS | P6_EVNTSEL_USR | counter; wrmsr(MSR_P6_EVNTSEL0, evntsel, 0); write_watchdog_counter("P6_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= P6_EVNTSEL0_ENABLE; wrmsr(MSR_P6_EVNTSEL0, evntsel, 0); } and then during the NMI tick handler this path was executed else if ( nmi_perfctr_msr == MSR_P6_PERFCTR0 ) { /* * Only P6 based Pentium M need to re-unmask the apic vector but * it doesn't hurt other P6 variants. */ apic_write(APIC_LVTPC, APIC_DM_NMI); } write_watchdog_counter(NULL); static inline void write_watchdog_counter(const char *descr) { u64 count = (u64)cpu_khz * 1000; do_div(count, nmi_hz); if(descr) Dprintk("setting %s to -0x%08Lx\n", descr, count); wrmsrl(nmi_perfctr_msr, 0 - count); } It is also my understanding that during the CPU c3 state change in cpu_idle.c, the APIC timer is turned off. See comments below. /* * Before invoking C3, be aware that TSC/APIC timer may be * stopped by H/W. Without carefully handling of TSC/APIC stop issues, * deep C state can't work correctly. */ /* preparing APIC stop */ lapic_timer_off(); <------------- APIC timer appears to be turned off here. /* Get start time (ticks) */ t1 = inl(pmtmr_ioport); /* Trace cpu idle entry */ TRACE_2D(TRC_PM_IDLE_ENTRY, cx->idx, t1); /* Invoke C3 */ acpi_idle_do_entry(cx); /* Get end time (ticks) */ t2 = inl(pmtmr_ioport); /* recovering TSC */ cstate_restore_tsc(); <----- this is our backport of an unstable patch to keep TSCs synchronized /* Trace cpu idle exit */ Thanks Keir! Roger -----Original Message----- From: Keir Fraser on behalf of Keir Fraser Sent: Tue 9/28/2010 11:30 AM To: Roger Cruz; Dan Magenheimer; Tim Deegan Cc: xen-devel@lists.xensource.com Subject: Re: [Xen-devel] State of current Xen debugger On 28/09/2010 16:21, "Roger Cruz" <roger.cruz@virtualcomputer.com> wrote: > I am still chasing this hard hang in our system with a modified 3.4.2 xen. I > have upgraded the BIOS and the problem still exists. The only thing that so > far had appeared to work was adding max_cstate=0 but now I have a report where > it still hung in one customer who had that flag enabled. The rest of them > have been successfully running for more than a week with this ³work-around². > I have isolated the problem to Lenovo with the Centrino processors. These > guys will stop the TSC when in C3. > > What I need to really understand is why the NMI/watchdog in Xen is not working > and causing a crash when the CPU hangs. I was under the impression that NMIs > couldn¹t be masked at all. Is there anyway that Xen could be disabling or > changing that behavior? I know the NMI is being driven by a timer set in the > NMI handler. Could there be a case where this timer is disabled? Any ideas > are welcome! The NMI counter gets driven by the APIC timer. Perhaps it needs poking womehow on wakeup from C3? My suggestion for debugging this would be to take a look at what native Linux does. The NMI perfctr poking logic was all taken from (rather old now) upstream Linux. -- Keir > Thanks > Roger R. Cruz > > > > > > > > From: xen-devel-bounces@lists.xensource.com > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Roger Cruz > Sent: Tuesday, September 14, 2010 11:55 AM > To: Dan Magenheimer; Tim Deegan > Cc: xen-devel@lists.xensource.com > Subject: RE: [Xen-devel] State of current Xen debugger > > Hi Dan, > > I am using 3.4.2 where we have made very minor modifications (some backports, > for example). > > I have not tried your suggestions.. so I will do that next.. thanks! > > R. > > -----Original Message----- > From: Dan Magenheimer [mailto:dan.magenheimer@oracle.com] > Sent: Tue 9/14/2010 11:19 AM > To: Roger Cruz; Tim Deegan > Cc: xen-devel@lists.xensource.com > Subject: RE: [Xen-devel] State of current Xen debugger > > A couple of thoughts: > > > > Have you tried max_cstate=0 (as a Xen boot option)? > > > > Also, you didn't say what version of Xen you are using but playing around with > hpet_broadcast (enabling it or force-disabling it as below) might be worth a > try. > > > > http://lists.xensource.com/archives/html/xen-devel/2010-09/msg00556.html > > > > From: Roger Cruz [mailto:roger.cruz@virtualcomputer.com] > Sent: Tuesday, September 14, 2010 8:56 AM > To: Tim Deegan > Cc: xen-devel@lists.xensource.com > Subject: RE: [Xen-devel] State of current Xen debugger > > > > Hi Tim, good to hear from you again > > I had a pretty good inkling that one of you hardcore developers would say that > :-) Yes, it is pretty well wedged. I can cause the problem more rapidly by > dropping to a single CPU. When the hang happens, the Xen console is > completely dead. None of the special keys work. > > I do have hopes a BIOS upgrade could fix this as a last resort but I want to > see if at least I can understand the problem. We have a few different > machines that are exhibiting similar symptoms so I have to see if I can find a > work-around without requiring every user to upgrade their BIOS :-( > > Just in case, what debugger have you been using? Are there recent > instructions on how to set it up that you can point me to? > > Thanks > Roger > > > -----Original Message----- > From: Tim Deegan [mailto:Tim.Deegan@citrix.com] > Sent: Tue 9/14/2010 10:30 AM > To: Roger Cruz > Cc: xen-devel@lists.xensource.com > Subject: Re: [Xen-devel] State of current Xen debugger > > Hi, > > At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: >> I am trying to debug a problem where the hypervisor is hanging hard. >> Not even the NMI watchdog is triggering a reboot. So I wanted to hook >> up a debugger. > > Sorry to bring a counsel of despair but if the NMI watchdog isn't > working then your chances of getting a working debugger are slim. It's > likely that at least one CPU is very very stuck. Does the 'd' debug key > work on the serial line when the machine is wedged? > > On a more cheerful note, I've twice seen hard hangs like this that > turned out to be hardware issues, fixable with BIOS upgrades. > > Cheers, > > Tim. > >> What is the state of the current debuggers out there? >> Any input on how I should set it up (kdb, gdb, etc) and pointers to a >> good wiki page are much appreciated. I did perform a Google search >> and found some links but I want to hear from the current developers as >> to what is most stable and useful for debugging this type of hard >> hang. I only have a serial port PCI-express card to use as the laptop >> has no built in port. > > -- > Tim Deegan <Tim.Deegan@citrix.com> > Principal Software Engineer, XenServer Engineering > Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 > 02:35:00 > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 > 02:35:00 > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 > 02:35:00 > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.856 / Virus Database: 271.1.1/3149 - Release Date: 09/28/10 02:34:00 [-- Attachment #1.2: Type: text/html, Size: 12393 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: State of current Xen debugger 2010-09-28 15:40 ` Roger Cruz @ 2010-09-28 17:06 ` Keir Fraser 2010-09-28 17:14 ` Roger Cruz 0 siblings, 1 reply; 13+ messages in thread From: Keir Fraser @ 2010-09-28 17:06 UTC (permalink / raw) To: Roger Cruz, Dan Magenheimer, Tim Deegan; +Cc: xen-devel Yeah, but the performance counters are driven by the same LAPIC timesource that drives the main LAPIC timer. -- Keir On 28/09/2010 16:40, "Roger Cruz" <roger.cruz@virtualcomputer.com> wrote: > > > By the APIC timer? When I traced this code I was under the impression that is > driven by the performance counters counting cycles and generating an interrupt > when the counter overflows. I found this was the routine being called to > setup the watchdog > > static void __pminit setup_p6_watchdog(unsigned counter) > { > unsigned int evntsel; > > nmi_perfctr_msr = MSR_P6_PERFCTR0; <--- register > > clear_msr_range(MSR_P6_EVNTSEL0, 2); > clear_msr_range(MSR_P6_PERFCTR0, 2); > > evntsel = P6_EVNTSEL_INT > | P6_EVNTSEL_OS > | P6_EVNTSEL_USR > | counter; > > wrmsr(MSR_P6_EVNTSEL0, evntsel, 0); > write_watchdog_counter("P6_PERFCTR0"); > apic_write(APIC_LVTPC, APIC_DM_NMI); > evntsel |= P6_EVNTSEL0_ENABLE; > wrmsr(MSR_P6_EVNTSEL0, evntsel, 0); > } > > and then during the NMI tick handler this path was executed > > else if ( nmi_perfctr_msr == MSR_P6_PERFCTR0 ) > { > /* > * Only P6 based Pentium M need to re-unmask the apic vector but > * it doesn't hurt other P6 variants. > */ > apic_write(APIC_LVTPC, APIC_DM_NMI); > } > write_watchdog_counter(NULL); > > > > static inline void write_watchdog_counter(const char *descr) > { > u64 count = (u64)cpu_khz * 1000; > > do_div(count, nmi_hz); > if(descr) > Dprintk("setting %s to -0x%08Lx\n", descr, count); > wrmsrl(nmi_perfctr_msr, 0 - count); > } > > > It is also my understanding that during the CPU c3 state change in cpu_idle.c, > the APIC timer is turned off. See comments below. > > /* > * Before invoking C3, be aware that TSC/APIC timer may be > * stopped by H/W. Without carefully handling of TSC/APIC stop issues, > * deep C state can't work correctly. > */ > /* preparing APIC stop */ > lapic_timer_off(); <------------- APIC timer appears to be turned off > here. > > /* Get start time (ticks) */ > t1 = inl(pmtmr_ioport); > /* Trace cpu idle entry */ > TRACE_2D(TRC_PM_IDLE_ENTRY, cx->idx, t1); > /* Invoke C3 */ > acpi_idle_do_entry(cx); > /* Get end time (ticks) */ > t2 = inl(pmtmr_ioport); > > /* recovering TSC */ > cstate_restore_tsc(); <----- this is our backport of an unstable > patch to keep TSCs synchronized > /* Trace cpu idle exit */ > > > Thanks Keir! > > Roger > > -----Original Message----- > From: Keir Fraser on behalf of Keir Fraser > Sent: Tue 9/28/2010 11:30 AM > To: Roger Cruz; Dan Magenheimer; Tim Deegan > Cc: xen-devel@lists.xensource.com > Subject: Re: [Xen-devel] State of current Xen debugger > > On 28/09/2010 16:21, "Roger Cruz" <roger.cruz@virtualcomputer.com> wrote: > >> I am still chasing this hard hang in our system with a modified 3.4.2 xen. I >> have upgraded the BIOS and the problem still exists. The only thing that so >> far had appeared to work was adding max_cstate=0 but now I have a report >> where >> it still hung in one customer who had that flag enabled. The rest of them >> have been successfully running for more than a week with this ³work-around². >> I have isolated the problem to Lenovo with the Centrino processors. These >> guys will stop the TSC when in C3. >> >> What I need to really understand is why the NMI/watchdog in Xen is not >> working >> and causing a crash when the CPU hangs. I was under the impression that NMIs >> couldn¹t be masked at all. Is there anyway that Xen could be disabling or >> changing that behavior? I know the NMI is being driven by a timer set in >> the >> NMI handler. Could there be a case where this timer is disabled? Any ideas >> are welcome! > > The NMI counter gets driven by the APIC timer. Perhaps it needs poking > womehow on wakeup from C3? My suggestion for debugging this would be to take > a look at what native Linux does. The NMI perfctr poking logic was all taken > from (rather old now) upstream Linux. > > -- Keir > >> Thanks >> Roger R. Cruz >> >> >> >> >> >> >> >> From: xen-devel-bounces@lists.xensource.com >> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Roger Cruz >> Sent: Tuesday, September 14, 2010 11:55 AM >> To: Dan Magenheimer; Tim Deegan >> Cc: xen-devel@lists.xensource.com >> Subject: RE: [Xen-devel] State of current Xen debugger >> >> Hi Dan, >> >> I am using 3.4.2 where we have made very minor modifications (some backports, >> for example). >> >> I have not tried your suggestions.. so I will do that next.. thanks! >> >> R. >> >> -----Original Message----- >> From: Dan Magenheimer [mailto:dan.magenheimer@oracle.com] >> Sent: Tue 9/14/2010 11:19 AM >> To: Roger Cruz; Tim Deegan >> Cc: xen-devel@lists.xensource.com >> Subject: RE: [Xen-devel] State of current Xen debugger >> >> A couple of thoughts: >> >> >> >> Have you tried max_cstate=0 (as a Xen boot option)? >> >> >> >> Also, you didn't say what version of Xen you are using but playing around >> with >> hpet_broadcast (enabling it or force-disabling it as below) might be worth a >> try. >> >> >> >> http://lists.xensource.com/archives/html/xen-devel/2010-09/msg00556.html >> >> >> >> From: Roger Cruz [mailto:roger.cruz@virtualcomputer.com] >> Sent: Tuesday, September 14, 2010 8:56 AM >> To: Tim Deegan >> Cc: xen-devel@lists.xensource.com >> Subject: RE: [Xen-devel] State of current Xen debugger >> >> >> >> Hi Tim, good to hear from you again >> >> I had a pretty good inkling that one of you hardcore developers would say >> that >> :-) Yes, it is pretty well wedged. I can cause the problem more rapidly by >> dropping to a single CPU. When the hang happens, the Xen console is >> completely dead. None of the special keys work. >> >> I do have hopes a BIOS upgrade could fix this as a last resort but I want to >> see if at least I can understand the problem. We have a few different >> machines that are exhibiting similar symptoms so I have to see if I can find >> a >> work-around without requiring every user to upgrade their BIOS :-( >> >> Just in case, what debugger have you been using? Are there recent >> instructions on how to set it up that you can point me to? >> >> Thanks >> Roger >> >> >> -----Original Message----- >> From: Tim Deegan [mailto:Tim.Deegan@citrix.com] >> Sent: Tue 9/14/2010 10:30 AM >> To: Roger Cruz >> Cc: xen-devel@lists.xensource.com >> Subject: Re: [Xen-devel] State of current Xen debugger >> >> Hi, >> >> At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: >>> I am trying to debug a problem where the hypervisor is hanging hard. >>> Not even the NMI watchdog is triggering a reboot. So I wanted to hook >>> up a debugger. >> >> Sorry to bring a counsel of despair but if the NMI watchdog isn't >> working then your chances of getting a working debugger are slim. It's >> likely that at least one CPU is very very stuck. Does the 'd' debug key >> work on the serial line when the machine is wedged? >> >> On a more cheerful note, I've twice seen hard hangs like this that >> turned out to be hardware issues, fixable with BIOS upgrades. >> >> Cheers, >> >> Tim. >> >>> What is the state of the current debuggers out there? >>> Any input on how I should set it up (kdb, gdb, etc) and pointers to a >>> good wiki page are much appreciated. I did perform a Google search >>> and found some links but I want to hear from the current developers as >>> to what is most stable and useful for debugging this type of hard >>> hang. I only have a serial port PCI-express card to use as the laptop >>> has no built in port. >> >> -- >> Tim Deegan <Tim.Deegan@citrix.com> >> Principal Software Engineer, XenServer Engineering >> Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 >> 02:35:00 >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 >> 02:35:00 >> >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 >> 02:35:00 >> >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xensource.com >> http://lists.xensource.com/xen-devel > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.856 / Virus Database: 271.1.1/3149 - Release Date: 09/28/10 > 02:34:00 > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: State of current Xen debugger 2010-09-28 17:06 ` Keir Fraser @ 2010-09-28 17:14 ` Roger Cruz 0 siblings, 0 replies; 13+ messages in thread From: Roger Cruz @ 2010-09-28 17:14 UTC (permalink / raw) To: Keir Fraser, Dan Magenheimer, Tim Deegan; +Cc: xen-devel Ok, so I'm obviously missing something here. I thought the performance counters were setup to measure CPU cycles, so when the CPU enters C3 and it asserts the STPCLK signal, then the performance counters won't increment and hence we won't get an NMI while the core is in C3. Only an external interrupt or other wake up event will wake it up. I understood that interrupt to be the HPET timer which is always running and not affected by TSC being shutdown. Could you please correct me if this is not right? What is the time source for the LAPIC timer? -----Original Message----- From: Keir Fraser [mailto:keir.xen@gmail.com] On Behalf Of Keir Fraser Sent: Tuesday, September 28, 2010 1:07 PM To: Roger Cruz; Dan Magenheimer; Tim Deegan Cc: xen-devel@lists.xensource.com Subject: Re: [Xen-devel] State of current Xen debugger Yeah, but the performance counters are driven by the same LAPIC timesource that drives the main LAPIC timer. -- Keir On 28/09/2010 16:40, "Roger Cruz" <roger.cruz@virtualcomputer.com> wrote: > > > By the APIC timer? When I traced this code I was under the impression that is > driven by the performance counters counting cycles and generating an interrupt > when the counter overflows. I found this was the routine being called to > setup the watchdog > > static void __pminit setup_p6_watchdog(unsigned counter) > { > unsigned int evntsel; > > nmi_perfctr_msr = MSR_P6_PERFCTR0; <--- register > > clear_msr_range(MSR_P6_EVNTSEL0, 2); > clear_msr_range(MSR_P6_PERFCTR0, 2); > > evntsel = P6_EVNTSEL_INT > | P6_EVNTSEL_OS > | P6_EVNTSEL_USR > | counter; > > wrmsr(MSR_P6_EVNTSEL0, evntsel, 0); > write_watchdog_counter("P6_PERFCTR0"); > apic_write(APIC_LVTPC, APIC_DM_NMI); > evntsel |= P6_EVNTSEL0_ENABLE; > wrmsr(MSR_P6_EVNTSEL0, evntsel, 0); > } > > and then during the NMI tick handler this path was executed > > else if ( nmi_perfctr_msr == MSR_P6_PERFCTR0 ) > { > /* > * Only P6 based Pentium M need to re-unmask the apic vector but > * it doesn't hurt other P6 variants. > */ > apic_write(APIC_LVTPC, APIC_DM_NMI); > } > write_watchdog_counter(NULL); > > > > static inline void write_watchdog_counter(const char *descr) > { > u64 count = (u64)cpu_khz * 1000; > > do_div(count, nmi_hz); > if(descr) > Dprintk("setting %s to -0x%08Lx\n", descr, count); > wrmsrl(nmi_perfctr_msr, 0 - count); > } > > > It is also my understanding that during the CPU c3 state change in cpu_idle.c, > the APIC timer is turned off. See comments below. > > /* > * Before invoking C3, be aware that TSC/APIC timer may be > * stopped by H/W. Without carefully handling of TSC/APIC stop issues, > * deep C state can't work correctly. > */ > /* preparing APIC stop */ > lapic_timer_off(); <------------- APIC timer appears to be turned off > here. > > /* Get start time (ticks) */ > t1 = inl(pmtmr_ioport); > /* Trace cpu idle entry */ > TRACE_2D(TRC_PM_IDLE_ENTRY, cx->idx, t1); > /* Invoke C3 */ > acpi_idle_do_entry(cx); > /* Get end time (ticks) */ > t2 = inl(pmtmr_ioport); > > /* recovering TSC */ > cstate_restore_tsc(); <----- this is our backport of an unstable > patch to keep TSCs synchronized > /* Trace cpu idle exit */ > > > Thanks Keir! > > Roger > > -----Original Message----- > From: Keir Fraser on behalf of Keir Fraser > Sent: Tue 9/28/2010 11:30 AM > To: Roger Cruz; Dan Magenheimer; Tim Deegan > Cc: xen-devel@lists.xensource.com > Subject: Re: [Xen-devel] State of current Xen debugger > > On 28/09/2010 16:21, "Roger Cruz" <roger.cruz@virtualcomputer.com> wrote: > >> I am still chasing this hard hang in our system with a modified 3.4.2 xen. I >> have upgraded the BIOS and the problem still exists. The only thing that so >> far had appeared to work was adding max_cstate=0 but now I have a report >> where >> it still hung in one customer who had that flag enabled. The rest of them >> have been successfully running for more than a week with this ³work-around². >> I have isolated the problem to Lenovo with the Centrino processors. These >> guys will stop the TSC when in C3. >> >> What I need to really understand is why the NMI/watchdog in Xen is not >> working >> and causing a crash when the CPU hangs. I was under the impression that NMIs >> couldn¹t be masked at all. Is there anyway that Xen could be disabling or >> changing that behavior? I know the NMI is being driven by a timer set in >> the >> NMI handler. Could there be a case where this timer is disabled? Any ideas >> are welcome! > > The NMI counter gets driven by the APIC timer. Perhaps it needs poking > womehow on wakeup from C3? My suggestion for debugging this would be to take > a look at what native Linux does. The NMI perfctr poking logic was all taken > from (rather old now) upstream Linux. > > -- Keir > >> Thanks >> Roger R. Cruz >> >> >> >> >> >> >> >> From: xen-devel-bounces@lists.xensource.com >> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Roger Cruz >> Sent: Tuesday, September 14, 2010 11:55 AM >> To: Dan Magenheimer; Tim Deegan >> Cc: xen-devel@lists.xensource.com >> Subject: RE: [Xen-devel] State of current Xen debugger >> >> Hi Dan, >> >> I am using 3.4.2 where we have made very minor modifications (some backports, >> for example). >> >> I have not tried your suggestions.. so I will do that next.. thanks! >> >> R. >> >> -----Original Message----- >> From: Dan Magenheimer [mailto:dan.magenheimer@oracle.com] >> Sent: Tue 9/14/2010 11:19 AM >> To: Roger Cruz; Tim Deegan >> Cc: xen-devel@lists.xensource.com >> Subject: RE: [Xen-devel] State of current Xen debugger >> >> A couple of thoughts: >> >> >> >> Have you tried max_cstate=0 (as a Xen boot option)? >> >> >> >> Also, you didn't say what version of Xen you are using but playing around >> with >> hpet_broadcast (enabling it or force-disabling it as below) might be worth a >> try. >> >> >> >> http://lists.xensource.com/archives/html/xen-devel/2010-09/msg00556.html >> >> >> >> From: Roger Cruz [mailto:roger.cruz@virtualcomputer.com] >> Sent: Tuesday, September 14, 2010 8:56 AM >> To: Tim Deegan >> Cc: xen-devel@lists.xensource.com >> Subject: RE: [Xen-devel] State of current Xen debugger >> >> >> >> Hi Tim, good to hear from you again >> >> I had a pretty good inkling that one of you hardcore developers would say >> that >> :-) Yes, it is pretty well wedged. I can cause the problem more rapidly by >> dropping to a single CPU. When the hang happens, the Xen console is >> completely dead. None of the special keys work. >> >> I do have hopes a BIOS upgrade could fix this as a last resort but I want to >> see if at least I can understand the problem. We have a few different >> machines that are exhibiting similar symptoms so I have to see if I can find >> a >> work-around without requiring every user to upgrade their BIOS :-( >> >> Just in case, what debugger have you been using? Are there recent >> instructions on how to set it up that you can point me to? >> >> Thanks >> Roger >> >> >> -----Original Message----- >> From: Tim Deegan [mailto:Tim.Deegan@citrix.com] >> Sent: Tue 9/14/2010 10:30 AM >> To: Roger Cruz >> Cc: xen-devel@lists.xensource.com >> Subject: Re: [Xen-devel] State of current Xen debugger >> >> Hi, >> >> At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: >>> I am trying to debug a problem where the hypervisor is hanging hard. >>> Not even the NMI watchdog is triggering a reboot. So I wanted to hook >>> up a debugger. >> >> Sorry to bring a counsel of despair but if the NMI watchdog isn't >> working then your chances of getting a working debugger are slim. It's >> likely that at least one CPU is very very stuck. Does the 'd' debug key >> work on the serial line when the machine is wedged? >> >> On a more cheerful note, I've twice seen hard hangs like this that >> turned out to be hardware issues, fixable with BIOS upgrades. >> >> Cheers, >> >> Tim. >> >>> What is the state of the current debuggers out there? >>> Any input on how I should set it up (kdb, gdb, etc) and pointers to a >>> good wiki page are much appreciated. I did perform a Google search >>> and found some links but I want to hear from the current developers as >>> to what is most stable and useful for debugging this type of hard >>> hang. I only have a serial port PCI-express card to use as the laptop >>> has no built in port. >> >> -- >> Tim Deegan <Tim.Deegan@citrix.com> >> Principal Software Engineer, XenServer Engineering >> Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 >> 02:35:00 >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 >> 02:35:00 >> >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 >> 02:35:00 >> >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xensource.com >> http://lists.xensource.com/xen-devel > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.856 / Virus Database: 271.1.1/3149 - Release Date: 09/28/10 > 02:34:00 > > No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.856 / Virus Database: 271.1.1/3149 - Release Date: 09/28/10 02:34:00 ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: State of current Xen debugger 2010-09-14 14:56 ` Roger Cruz 2010-09-14 15:19 ` Dan Magenheimer @ 2010-09-14 15:20 ` Tim Deegan 2010-09-14 16:08 ` Roger Cruz 1 sibling, 1 reply; 13+ messages in thread From: Tim Deegan @ 2010-09-14 15:20 UTC (permalink / raw) To: Roger Cruz; +Cc: xen-devel At 15:56 +0100 on 14 Sep (1284479787), Roger Cruz wrote: > I had a pretty good inkling that one of you hardcore developers would > say that :-) Yes, it is pretty well wedged. I can cause the problem > more rapidly by dropping to a single CPU. When the hang happens, the > Xen console is completely dead. None of the special keys work. If the 'd' key doesn't work then the serial irq isn't getting handled, so the CPU is wedged at a higher TPR (at least). Usually in that case the CPU is spinning so the NMI watchdog timer kicks in OK; possibly if it was idle with a high TPR it wouldn't. What version of Xen are you using? It might be worth trying a boot with MSI disabled (there were reports at one stage of MSIs not being EOI'd because the timer interupt that would remind Xen to EOI them was at a lower priority than the MSI). > I do have hopes a BIOS upgrade could fix this as a last resort but I > want to see if at least I can understand the problem. We have a few > different machines that are exhibiting similar symptoms so I have to > see if I can find a work-around without requiring every user to > upgrade their BIOS :-( > > Just in case, what debugger have you been using? Are there recent > instructions on how to set it up that you can point me to? I don't use a debugger on Xen. I usually find that by the time the debugger kicks in it's too late to help, so I end up finding bugs by code inspection and printks. :) Mukesh Rathor at Oracle has done some debugger work, though, including an in-Xen debugger. There's a gdb stub too but I suspect it's rotted quite badly. Cheers, Tim. > Thanks > Roger > > > -----Original Message----- > From: Tim Deegan [mailto:Tim.Deegan@citrix.com] > Sent: Tue 9/14/2010 10:30 AM > To: Roger Cruz > Cc: xen-devel@lists.xensource.com > Subject: Re: [Xen-devel] State of current Xen debugger > > Hi, > > At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: > > I am trying to debug a problem where the hypervisor is hanging hard. > > Not even the NMI watchdog is triggering a reboot. So I wanted to hook > > up a debugger. > > Sorry to bring a counsel of despair but if the NMI watchdog isn't > working then your chances of getting a working debugger are slim. It's > likely that at least one CPU is very very stuck. Does the 'd' debug key > work on the serial line when the machine is wedged? > > On a more cheerful note, I've twice seen hard hangs like this that > turned out to be hardware issues, fixable with BIOS upgrades. > > Cheers, > > Tim. > > > What is the state of the current debuggers out there? > > Any input on how I should set it up (kdb, gdb, etc) and pointers to a > > good wiki page are much appreciated. I did perform a Google search > > and found some links but I want to hear from the current developers as > > to what is most stable and useful for debugging this type of hard > > hang. I only have a serial port PCI-express card to use as the laptop > > has no built in port. > > -- > Tim Deegan <Tim.Deegan@citrix.com> > Principal Software Engineer, XenServer Engineering > Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 > -- Tim Deegan <Tim.Deegan@citrix.com> Principal Software Engineer, XenServer Engineering Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: State of current Xen debugger 2010-09-14 15:20 ` Tim Deegan @ 2010-09-14 16:08 ` Roger Cruz 0 siblings, 0 replies; 13+ messages in thread From: Roger Cruz @ 2010-09-14 16:08 UTC (permalink / raw) To: Tim Deegan; +Cc: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 8938 bytes --] I am using 3.4.2 with some modifications I added printks to the nmi_watchdog_tick as shown below. I don't break the console lock.. but I am convinced that the printk lock is not the problem because I have also tested by having a void printk routine and it still hangs, so it felt pretty safe not breaking the lock. I also tried the console_start/end_sync to make sure I was seeing all the messages when it hung. void nmi_watchdog_tick(struct cpu_user_regs * regs) { unsigned int sum = this_cpu(nmi_timer_ticks); if ( (this_cpu(last_irq_sums) == sum) && !atomic_read(&watchdog_disable_count) ) { if (sum > 20) { // console_start_sync(); printk("**** CPU%d, counter=%d, last_sum=%d, curr_sum=%d, hz=%d, nmis=%d\n", smp_processor_id(), this_cpu(alert_counter), this_cpu(last_irq_sums), sum, 5*nmi_hz, nmi_count(smp_processor_id()) ); // console_end_sync(); } /* * Ayiee, looks like this CPU is stuck ... wait a few IRQs (5 seconds) * before doing the oops ... */ this_cpu(alert_counter)++; if ( this_cpu(alert_counter) == 5*nmi_hz ) { console_force_unlock(); printk("Watchdog timer detects that CPU%d is stuck!\n", smp_processor_id()); fatal_trap(TRAP_nmi, regs); } } else { if (sum > 20) { // console_start_sync(); printk("*CPU%d, counter=%d, last_sum=%d, curr_sum=%d, nmis=%d\n", smp_processor_id(), this_cpu(alert_counter), this_cpu(last_irq_sums), sum, nmi_count(smp_processor_id()) ); //console_end_sync(); } this_cpu(last_irq_sums) = sum; this_cpu(alert_counter) = 0; } My messages stop printing and I get a hard hang. the Performance Ctr NMI appears to come once every 4 seconds. However, I have observed instances where they are about 10 seconds apart. Not sure what is making the NMIs come in at uneven intervals. As a test, I turned on SpeedStep and power management functions in the BIOS and it still hangs. XEN) *CPU0, counter=0, last_sum=974, curr_sum=977, nmis=391 (XEN) *CPU0, counter=0, last_sum=977, curr_sum=979, nmis=392 (XEN) *CPU0, counter=0, last_sum=979, curr_sum=981, nmis=393 (XEN) *CPU0, counter=0, last_sum=981, curr_sum=984, nmis=394 (XEN) *CPU0, counter=0, last_sum=984, curr_sum=986, nmis=395 (XEN) *CPU0, counter=0, last_sum=986, curr_sum=988, nmis=396 (XEN) *CPU0, counter=0, last_sum=988, curr_sum=991, nmis=397 (XEN) *CPU0, counter=0, last_sum=991, curr_sum=993, nmis=398 (XEN) *CPU0, counter=0, last_sum=993, curr_sum=995, nmis=399 (XEN) *CPU0, counter=0, last_sum=995, curr_sum=997, nmis=400 (XEN) *CPU0, counter=0, last_sum=997, curr_sum=1000, nmis=401 (XEN) *CPU0, counter=0, last_sum=1000, curr_sum=1002, nmis=402 (XEN) *CPU0, counter=0, last_sum=1002, curr_sum=1005, nmis=403 (XEN) *CPU0, counter=0, last_sum=1005, curr_sum=1008, nmis=404 (XEN) *CPU0, counter=0, last_sum=1008, curr_sum=1010, nmis=405 (XEN) *CPU0, counter=0, last_sum=1010, curr_sum=1013, nmis=406 (XEN) *CPU0, counter=0, last_sum=1013, curr_sum=1015, nmis=407 (XEN) *CPU0, counter=0, last_sum=1015, curr_sum=1018, nmis=408 (XEN) *CPU0, counter=0, last_sum=1018, curr_sum=1020, nmis=409 (XEN) *CPU0, counter=0, last_sum=1020, curr_sum=1023, nmis=410 (XEN) *CPU0, counter=0, last_sum=1023, curr_sum=1026, nmis=411 (XEN) *CPU0, counter=0, last_sum=1026, curr_sum=1029, nmis=412 (XEN) *CPU0, counter=0, last_sum=1029, curr_sum=1031, nmis=413 (XEN) *CPU0, counter=0, last_sum=1031, curr_sum=1033, nmis=414 (XEN) *CPU0, counter=0, last_sum=1033, curr_sum=1035, nmis=415 (XEN) *CPU0, counter=0, last_sum=1035, curr_sum=1038, nmis=416 (XEN) *CPU0, counter=0, last_sum=1038, curr_sum=1041, nmis=417 (XEN) *CPU0, counter=0, last_sum=1041, curr_sum=1043, nmis=418 (XEN) *CPU0, counter=0, last_sum=1043, curr_sum=1046, nmis=419 (XEN) *CPU0, counter=0, last_sum=1046, curr_sum=1049, nmis=420 (XEN) *CPU0, counter=0, last_sum=1049, curr_sum=1051, nmis=421 (XEN) *CPU0, counter=0, last_sum=1051, curr_sum=1055, nmis=422 (XEN) *CPU0, counter=0, last_sum=1055, curr_sum=1058, nmis=423 (XEN) *CPU0, counter=0, last_sum=1058, curr_sum=1061, nmis=424 (XEN) *CPU0, counter=0, last_sum=1061, curr_sum=1064, nmis=425 (XEN) *CPU0, counter=0, last_sum=1064, curr_sum=1067, nmis=426 (XEN) *CPU0, counter=0, last_sum=1067, curr_sum=1070, nmis=427 (XEN) *CPU0, counter=0, last_sum=1070, curr_sum=1073, nmis=428 (XEN) *CPU0, counter=0, last_sum=1073, curr_sum=1076, nmis=429 __ __ _____ _ _ ____ \ \/ /___ _ __ |___ /| || | |___ \ \ // _ \ '_ \ |_ \| || |_ __) | / \ __/ | | | ___) |__ _| / __/ /_/\_\___|_| |_| |____(_) |_|(_)_____| (XEN) Xen version 3.4.2 (rcruz@) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) Mon Sep 13 23:06:17 UTC 2010 (XEN) Latest ChangeSet: Mon Sep 13 16:12:14 2010 -0400 132:a499dd8fcb55 -----Original Message----- From: Tim Deegan [mailto:Tim.Deegan@citrix.com] Sent: Tue 9/14/2010 11:20 AM To: Roger Cruz Cc: xen-devel@lists.xensource.com Subject: Re: [Xen-devel] State of current Xen debugger At 15:56 +0100 on 14 Sep (1284479787), Roger Cruz wrote: > I had a pretty good inkling that one of you hardcore developers would > say that :-) Yes, it is pretty well wedged. I can cause the problem > more rapidly by dropping to a single CPU. When the hang happens, the > Xen console is completely dead. None of the special keys work. If the 'd' key doesn't work then the serial irq isn't getting handled, so the CPU is wedged at a higher TPR (at least). Usually in that case the CPU is spinning so the NMI watchdog timer kicks in OK; possibly if it was idle with a high TPR it wouldn't. What version of Xen are you using? It might be worth trying a boot with MSI disabled (there were reports at one stage of MSIs not being EOI'd because the timer interupt that would remind Xen to EOI them was at a lower priority than the MSI). > I do have hopes a BIOS upgrade could fix this as a last resort but I > want to see if at least I can understand the problem. We have a few > different machines that are exhibiting similar symptoms so I have to > see if I can find a work-around without requiring every user to > upgrade their BIOS :-( > > Just in case, what debugger have you been using? Are there recent > instructions on how to set it up that you can point me to? I don't use a debugger on Xen. I usually find that by the time the debugger kicks in it's too late to help, so I end up finding bugs by code inspection and printks. :) Mukesh Rathor at Oracle has done some debugger work, though, including an in-Xen debugger. There's a gdb stub too but I suspect it's rotted quite badly. Cheers, Tim. > Thanks > Roger > > > -----Original Message----- > From: Tim Deegan [mailto:Tim.Deegan@citrix.com] > Sent: Tue 9/14/2010 10:30 AM > To: Roger Cruz > Cc: xen-devel@lists.xensource.com > Subject: Re: [Xen-devel] State of current Xen debugger > > Hi, > > At 15:22 +0100 on 14 Sep (1284477779), Roger Cruz wrote: > > I am trying to debug a problem where the hypervisor is hanging hard. > > Not even the NMI watchdog is triggering a reboot. So I wanted to hook > > up a debugger. > > Sorry to bring a counsel of despair but if the NMI watchdog isn't > working then your chances of getting a working debugger are slim. It's > likely that at least one CPU is very very stuck. Does the 'd' debug key > work on the serial line when the machine is wedged? > > On a more cheerful note, I've twice seen hard hangs like this that > turned out to be hardware issues, fixable with BIOS upgrades. > > Cheers, > > Tim. > > > What is the state of the current debuggers out there? > > Any input on how I should set it up (kdb, gdb, etc) and pointers to a > > good wiki page are much appreciated. I did perform a Google search > > and found some links but I want to hear from the current developers as > > to what is most stable and useful for debugging this type of hard > > hang. I only have a serial port PCI-express card to use as the laptop > > has no built in port. > > -- > Tim Deegan <Tim.Deegan@citrix.com> > Principal Software Engineer, XenServer Engineering > Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 > -- Tim Deegan <Tim.Deegan@citrix.com> Principal Software Engineer, XenServer Engineering Citrix Systems UK Ltd. (Company #02937203, SL9 0BG) No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3119 - Release Date: 09/14/10 02:35:00 [-- Attachment #1.2: Type: text/html, Size: 12355 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2010-09-28 17:14 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-09-14 14:22 State of current Xen debugger Roger Cruz 2010-09-14 14:30 ` Tim Deegan 2010-09-14 14:56 ` Roger Cruz 2010-09-14 15:19 ` Dan Magenheimer 2010-09-14 15:54 ` Roger Cruz 2010-09-15 14:19 ` Roger Cruz 2010-09-28 15:21 ` Roger Cruz 2010-09-28 15:30 ` Keir Fraser 2010-09-28 15:40 ` Roger Cruz 2010-09-28 17:06 ` Keir Fraser 2010-09-28 17:14 ` Roger Cruz 2010-09-14 15:20 ` Tim Deegan 2010-09-14 16:08 ` Roger Cruz
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.