Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[ZHOU Yanxin]

[-- Attachment #1: Type: text/plain, Size: 952 bytes --]

Dear Sir,

         I downloaded the imx-3.14.52-1.1.0_ga from freescale public git server, and now I am bitbake meta-toolchain-qt5,
and the linux-imx-3.14.52-r0 do_fetch task have stopped. Could you help me?

Thanks
Best regards!

Yanxin ZHOU
PE Electronic TL
STAUBLI HANGZHOU LTD.
No 123 Weiken Street Hangzhou Economic & Technological Development Zone
310018 Hangzhou / CN
Phone: +86 40066 70066-1229
mailto: y.zhou@staubli.com<mailto:y.zhou@staubli.com>
www.staubli.com<http://www.staubli.com/>
This e-mail and any attachment (the 'message') are confidential and privileged and intended solely for the person or the entity
to which it is addressed. If you have received it in error, please advise the sender by return e-mail and delete it immediately.
Any use not in accordance with its purpose, any dissemination or reproduction, either whole or partial, by entities other than
the intended recipient is strictly prohibited.


[-- Attachment #2: Type: text/html, Size: 5067 bytes --]

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[Otavio Salvador]

On Tue, Apr 12, 2016 at 3:22 AM, ZHOU Yanxin <y.zhou@staubli.com> wrote:
>          I downloaded the imx-3.14.52-1.1.0_ga from freescale public git
> server, and now I am bitbake meta-toolchain-qt5,
>
> and the linux-imx-3.14.52-r0 do_fetch task have stopped. Could you help me?

It is likely to be downloading it; this is a huge repository.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[ZHOU Yanxin]

I tried several times, and one time there was the error which told me that the repo is not reached.
And I also checked the
GitHub,there is no Linux-imx-3.14.52,
now I am stucked with this problem,because I need the rootfs and cross-tool chain for qt5 and c programs.
Thank you very much!

发自我的 iPhone

> 在 2016年4月12日，19:10，Otavio Salvador <otavio.salvador@ossystems.com.br> 写道：
> 
>> On Tue, Apr 12, 2016 at 3:22 AM, ZHOU Yanxin <y.zhou@staubli.com> wrote:
>>         I downloaded the imx-3.14.52-1.1.0_ga from freescale public git
>> server, and now I am bitbake meta-toolchain-qt5,
>> 
>> and the linux-imx-3.14.52-r0 do_fetch task have stopped. Could you help me?
> 
> It is likely to be downloading it; this is a huge repository.
> 
> -- 
> Otavio Salvador                             O.S. Systems
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=QF51mjz_kRqUZ4RRnAzbunrh5v7OMGGicaO3JlFabco&s=aw0PYZ0lSWvXzX-BLaalp-jNU_ZWI09USrWLMR42Lno&e=         https://urldefense.proofpoint.com/v2/url?u=http-3A__code.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=QF51mjz_kRqUZ4RRnAzbunrh5v7OMGGicaO3JlFabco&s=u3EHzMSzCl4_CkKHnAU7pf-RusSWvxvWUA_NuxA7rM8&e= 
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[Otavio Salvador]

On Tue, Apr 12, 2016 at 10:09 AM, ZHOU Yanxin <y.zhou@staubli.com> wrote:
> I tried several times, and one time there was the error which told me that the repo is not reached.
> And I also checked the
> GitHub,there is no Linux-imx-3.14.52,
> now I am stucked with this problem,because I need the rootfs and cross-tool chain for qt5 and c programs.
> Thank you very much!

If you use the community release, you will get it in linux-fslc-imx recipe.


-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[ZHOU Yanxin]

Let me describe the steps I did these days:
1. Install necessary packages on my Ubuntu 14.04 LTS;
2. Download the repo;
3. repo init ... imx 3.14.52-1.1.0_ga;
4. sudo repo sync;
5. MACHINE=imx6solosabreauto source fsl-...sh -b build -e fb;
6. I also modified the local.conf according to the "using yocto on wand board";
7. bitbake meta-tool chain-qt5;

Yes, I use the Freescale public git, and download the fsl-arm-yocto-bsp.
Because I don't have my laptop and manuals around, maybe there will be some mistakes.

We use imx6solo, and we want to use qt5, and there are also c programs to control the real time tasks.we also will use the Xenomai technology.

And we are playing with the riotboard, our customized board now
Is being made, so we really want to solve this big problem.

Thanks.



发自我的 iPhone

> 在 2016年4月12日，21:13，Otavio Salvador <otavio.salvador@ossystems.com.br> 写道：
> 
>> On Tue, Apr 12, 2016 at 10:09 AM, ZHOU Yanxin <y.zhou@staubli.com> wrote:
>> I tried several times, and one time there was the error which told me that the repo is not reached.
>> And I also checked the
>> GitHub,there is no Linux-imx-3.14.52,
>> now I am stucked with this problem,because I need the rootfs and cross-tool chain for qt5 and c programs.
>> Thank you very much!
> 
> If you use the community release, you will get it in linux-fslc-imx recipe.
> 
> 
> -- 
> Otavio Salvador                             O.S. Systems
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=83Az-QKFJmattlwqB0Yz-EEpUCmejN4jkP5IRARKudY&s=69_ESE2ioc3bqZEC8W0_VQsCa4Mma2Dxt1sWOVAt0Lo&e=         https://urldefense.proofpoint.com/v2/url?u=http-3A__code.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=83Az-QKFJmattlwqB0Yz-EEpUCmejN4jkP5IRARKudY&s=Y8bKGqyoiPOU0G88NB0IJFsKndSjczUNkH2-OTXCbSA&e= 
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[Otavio Salvador]

On Tue, Apr 12, 2016 at 10:26 AM, ZHOU Yanxin <y.zhou@staubli.com> wrote:
> Let me describe the steps I did these days:
> 1. Install necessary packages on my Ubuntu 14.04 LTS;
> 2. Download the repo;
> 3. repo init ... imx 3.14.52-1.1.0_ga;
> 4. sudo repo sync;
> 5. MACHINE=imx6solosabreauto source fsl-...sh -b build -e fb;
> 6. I also modified the local.conf according to the "using yocto on wand board";
> 7. bitbake meta-tool chain-qt5;
>
> Yes, I use the Freescale public git, and download the fsl-arm-yocto-bsp.
> Because I don't have my laptop and manuals around, maybe there will be some mistakes.
>
> We use imx6solo, and we want to use qt5, and there are also c programs to control the real time tasks.we also will use the Xenomai technology.
>
> And we are playing with the riotboard, our customized board now
> Is being made, so we really want to solve this big problem.

I said FSL Community BSP, not NXP release. Check the doc here:
http://freescale.github.io/doc/release-notes/2.0/


-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[ZHOU Yanxin]

Great! I didn't read this document, I read many Yocto documents and the Freescale Yocto user's guide, and quite confusing. I will read your document tomorrow and give it a try.
Thank you for much indeed. Much better than I contact the FAE in China.

发自我的 iPhone

> 在 2016年4月12日，21:47，Otavio Salvador <otavio.salvador@ossystems.com.br> 写道：
> 
>> On Tue, Apr 12, 2016 at 10:26 AM, ZHOU Yanxin <y.zhou@staubli.com> wrote:
>> Let me describe the steps I did these days:
>> 1. Install necessary packages on my Ubuntu 14.04 LTS;
>> 2. Download the repo;
>> 3. repo init ... imx 3.14.52-1.1.0_ga;
>> 4. sudo repo sync;
>> 5. MACHINE=imx6solosabreauto source fsl-...sh -b build -e fb;
>> 6. I also modified the local.conf according to the "using yocto on wand board";
>> 7. bitbake meta-tool chain-qt5;
>> 
>> Yes, I use the Freescale public git, and download the fsl-arm-yocto-bsp.
>> Because I don't have my laptop and manuals around, maybe there will be some mistakes.
>> 
>> We use imx6solo, and we want to use qt5, and there are also c programs to control the real time tasks.we also will use the Xenomai technology.
>> 
>> And we are playing with the riotboard, our customized board now
>> Is being made, so we really want to solve this big problem.
> 
> I said FSL Community BSP, not NXP release. Check the doc here:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__freescale.github.io_doc_release-2Dnotes_2.0_&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=rI5uUVmsASzy2lUKNHkgXK5SV5p-rKJt1KTjp6xGCL8&e= 
> 
> 
> -- 
> Otavio Salvador                             O.S. Systems
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=ADdimzq0O-y0SlFILTk-GVJuB05iL5fj6mRFbzffSPU&e=         https://urldefense.proofpoint.com/v2/url?u=http-3A__code.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=7lylyBNdaJvy2vPlUvPFB13xWWGqZH5GFdDI-5M1v8s&e= 
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[ZHOU Yanxin]

Dear Sir,
This time I tried the fsl-community-bsp(jethro branch),and the download of Linux-fslc is also ok now.
And I also download the meta-qt5(jethro branch), and referred to the "building qt5 using yocto
on wandboard",added many packages to the "Image_install_append"( is it necessary? cause there are already many recipes in meta-qt5).
The bitbake meta-tool chain-qt5 (MACHINE=imx6solosabreauto) is successful, but I only find the cross-toolchain, cannt find the rootfs to put on the riotboard.
Do I should use bitbake fsl-image-qt5 -c populate_sdk in my case?
Thank you very much!
Looking forward to receiving your reply!
Best regards!

发自我的 iPhone

> 在 2016年4月12日，21:47，Otavio Salvador <otavio.salvador@ossystems.com.br> 写道：
> 
>> On Tue, Apr 12, 2016 at 10:26 AM, ZHOU Yanxin <y.zhou@staubli.com> wrote:
>> Let me describe the steps I did these days:
>> 1. Install necessary packages on my Ubuntu 14.04 LTS;
>> 2. Download the repo;
>> 3. repo init ... imx 3.14.52-1.1.0_ga;
>> 4. sudo repo sync;
>> 5. MACHINE=imx6solosabreauto source fsl-...sh -b build -e fb;
>> 6. I also modified the local.conf according to the "using yocto on wand board";
>> 7. bitbake meta-tool chain-qt5;
>> 
>> Yes, I use the Freescale public git, and download the fsl-arm-yocto-bsp.
>> Because I don't have my laptop and manuals around, maybe there will be some mistakes.
>> 
>> We use imx6solo, and we want to use qt5, and there are also c programs to control the real time tasks.we also will use the Xenomai technology.
>> 
>> And we are playing with the riotboard, our customized board now
>> Is being made, so we really want to solve this big problem.
> 
> I said FSL Community BSP, not NXP release. Check the doc here:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__freescale.github.io_doc_release-2Dnotes_2.0_&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=rI5uUVmsASzy2lUKNHkgXK5SV5p-rKJt1KTjp6xGCL8&e= 
> 
> 
> -- 
> Otavio Salvador                             O.S. Systems
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=ADdimzq0O-y0SlFILTk-GVJuB05iL5fj6mRFbzffSPU&e=         https://urldefense.proofpoint.com/v2/url?u=http-3A__code.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=7lylyBNdaJvy2vPlUvPFB13xWWGqZH5GFdDI-5M1v8s&e= 
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[ZHOU Yanxin]

Dear Sir,

I see I should not use fsl-image-qt5, but use "bitbake fsl-image-multimedia-full". First I had "gst-fsl-plugin" error,
but now I have fixed it (referred to the fsl release note 2.0, updated the packagegroup names in the "IMAGE_INSTALL_append").
But there is one error "alsa-ultils-alsaconf is unbuildable" when I use "bitbake fsl-image-multimedia-full", can you help me?

Thanks
Best regards!

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Yesterday's email:

Dear Sir,
This time I tried the fsl-community-bsp(jethro branch),and the download of Linux-fslc is also ok now.
And I also download the meta-qt5(jethro branch), and referred to the "building qt5 using yocto
on wandboard",added many packages to the "Image_install_append"( is it necessary? cause there are already many recipes in meta-qt5).
The bitbake meta-tool chain-qt5 (MACHINE=imx6solosabreauto) is successful, but I only find the cross-toolchain, cannt find the rootfs to put on the riotboard.
Do I should use bitbake fsl-image-qt5 -c populate_sdk in my case?
Thank you very much!
Looking forward to receiving your reply!

Best regards!

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Yanxin ZHOU
Electronic Product Engineering
STAUBLI HANGZHOU LTD.
No 123 Weiken Street Hangzhou Economic & Technological Development Zone
310018 Hangzhou / CN
Phone: +86 40066 70066
Mobile: +86 18605811677
mailto: y.zhou@staubli.com
www.staubli.com
This e-mail and any attachment (the 'message') are confidential and privileged and intended solely for the person or the entity
to which it is addressed. If you have received it in error, please advise the sender by return e-mail and delete it immediately.
Any use not in accordance with its purpose, any dissemination or reproduction, either whole or partial, by entities other than
the intended recipient is strictly prohibited.
-----Original Message-----
From: ZHOU Yanxin 
Sent: 2016年4月17日 19:54
To: Otavio Salvador
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

Dear Sir,
This time I tried the fsl-community-bsp(jethro branch),and the download of Linux-fslc is also ok now.
And I also download the meta-qt5(jethro branch), and referred to the "building qt5 using yocto
on wandboard",added many packages to the "Image_install_append"( is it necessary? cause there are already many recipes in meta-qt5).
The bitbake meta-tool chain-qt5 (MACHINE=imx6solosabreauto) is successful, but I only find the cross-toolchain, cannt find the rootfs to put on the riotboard.
Do I should use bitbake fsl-image-qt5 -c populate_sdk in my case?
Thank you very much!
Looking forward to receiving your reply!
Best regards!

发自我的 iPhone

> 在 2016年4月12日，21:47，Otavio Salvador <otavio.salvador@ossystems.com.br> 写道：
> 
>> On Tue, Apr 12, 2016 at 10:26 AM, ZHOU Yanxin <y.zhou@staubli.com> wrote:
>> Let me describe the steps I did these days:
>> 1. Install necessary packages on my Ubuntu 14.04 LTS;
>> 2. Download the repo;
>> 3. repo init ... imx 3.14.52-1.1.0_ga;
>> 4. sudo repo sync;
>> 5. MACHINE=imx6solosabreauto source fsl-...sh -b build -e fb;
>> 6. I also modified the local.conf according to the "using yocto on wand board";
>> 7. bitbake meta-tool chain-qt5;
>> 
>> Yes, I use the Freescale public git, and download the fsl-arm-yocto-bsp.
>> Because I don't have my laptop and manuals around, maybe there will be some mistakes.
>> 
>> We use imx6solo, and we want to use qt5, and there are also c programs to control the real time tasks.we also will use the Xenomai technology.
>> 
>> And we are playing with the riotboard, our customized board now
>> Is being made, so we really want to solve this big problem.
> 
> I said FSL Community BSP, not NXP release. Check the doc here:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__freescale.github.io_doc_release-2Dnotes_2.0_&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=rI5uUVmsASzy2lUKNHkgXK5SV5p-rKJt1KTjp6xGCL8&e= 
> 
> 
> -- 
> Otavio Salvador                             O.S. Systems
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=ADdimzq0O-y0SlFILTk-GVJuB05iL5fj6mRFbzffSPU&e=         https://urldefense.proofpoint.com/v2/url?u=http-3A__code.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=7lylyBNdaJvy2vPlUvPFB13xWWGqZH5GFdDI-5M1v8s&e= 
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[ZHOU Yanxin]

Dear Sir,

Just now, I deleted "alsa-utils-alsaconf" in my local.conf, and now the "bitbake fsl-image-multimedia-full" can run, I don't know whether it is good or not...

Best regards!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Dear Sir,

I see I should not use fsl-image-qt5, but use "bitbake fsl-image-multimedia-full". First I had "gst-fsl-plugin" error,
but now I have fixed it (referred to the fsl release note 2.0, updated the packagegroup names in the "IMAGE_INSTALL_append").
But there is one error "alsa-ultils-alsaconf is unbuildable" when I use "bitbake fsl-image-multimedia-full", can you help me?

Thanks
Best regards!

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Yesterday's email:

Dear Sir,
This time I tried the fsl-community-bsp(jethro branch),and the download of Linux-fslc is also ok now.
And I also download the meta-qt5(jethro branch), and referred to the "building qt5 using yocto
on wandboard",added many packages to the "Image_install_append"( is it necessary? cause there are already many recipes in meta-qt5).
The bitbake meta-tool chain-qt5 (MACHINE=imx6solosabreauto) is successful, but I only find the cross-toolchain, cannt find the rootfs to put on the riotboard.
Do I should use bitbake fsl-image-qt5 -c populate_sdk in my case?
Thank you very much!
Looking forward to receiving your reply!

Best regards!

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Yanxin ZHOU
Electronic Product Engineering
STAUBLI HANGZHOU LTD.
No 123 Weiken Street Hangzhou Economic & Technological Development Zone
310018 Hangzhou / CN
Phone: +86 40066 70066
Mobile: +86 18605811677
mailto: y.zhou@staubli.com
www.staubli.com
This e-mail and any attachment (the 'message') are confidential and privileged and intended solely for the person or the entity
to which it is addressed. If you have received it in error, please advise the sender by return e-mail and delete it immediately.
Any use not in accordance with its purpose, any dissemination or reproduction, either whole or partial, by entities other than
the intended recipient is strictly prohibited.
-----Original Message-----
From: ZHOU Yanxin 
Sent: 2016年4月17日 19:54
To: Otavio Salvador
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

Dear Sir,
This time I tried the fsl-community-bsp(jethro branch),and the download of Linux-fslc is also ok now.
And I also download the meta-qt5(jethro branch), and referred to the "building qt5 using yocto
on wandboard",added many packages to the "Image_install_append"( is it necessary? cause there are already many recipes in meta-qt5).
The bitbake meta-tool chain-qt5 (MACHINE=imx6solosabreauto) is successful, but I only find the cross-toolchain, cannt find the rootfs to put on the riotboard.
Do I should use bitbake fsl-image-qt5 -c populate_sdk in my case?
Thank you very much!
Looking forward to receiving your reply!
Best regards!

发自我的 iPhone

> 在 2016年4月12日，21:47，Otavio Salvador <otavio.salvador@ossystems.com.br> 写道：
> 
>> On Tue, Apr 12, 2016 at 10:26 AM, ZHOU Yanxin <y.zhou@staubli.com> wrote:
>> Let me describe the steps I did these days:
>> 1. Install necessary packages on my Ubuntu 14.04 LTS;
>> 2. Download the repo;
>> 3. repo init ... imx 3.14.52-1.1.0_ga;
>> 4. sudo repo sync;
>> 5. MACHINE=imx6solosabreauto source fsl-...sh -b build -e fb;
>> 6. I also modified the local.conf according to the "using yocto on wand board";
>> 7. bitbake meta-tool chain-qt5;
>> 
>> Yes, I use the Freescale public git, and download the fsl-arm-yocto-bsp.
>> Because I don't have my laptop and manuals around, maybe there will be some mistakes.
>> 
>> We use imx6solo, and we want to use qt5, and there are also c programs to control the real time tasks.we also will use the Xenomai technology.
>> 
>> And we are playing with the riotboard, our customized board now
>> Is being made, so we really want to solve this big problem.
> 
> I said FSL Community BSP, not NXP release. Check the doc here:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__freescale.github.io_doc_release-2Dnotes_2.0_&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=rI5uUVmsASzy2lUKNHkgXK5SV5p-rKJt1KTjp6xGCL8&e= 
> 
> 
> -- 
> Otavio Salvador                             O.S. Systems
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=ADdimzq0O-y0SlFILTk-GVJuB05iL5fj6mRFbzffSPU&e=         https://urldefense.proofpoint.com/v2/url?u=http-3A__code.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=7lylyBNdaJvy2vPlUvPFB13xWWGqZH5GFdDI-5M1v8s&e= 
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[ZHOU Yanxin]

Dear Sir,

Finally I got a "do_rootfs " error, and I checked the log file, it says missing the "qt3d-tools", and I added one line on the local.conf: PACKAGECONFIG_DISTRO_pn-qtbase="accessibility".
Now I am doing "bitbake fsl-image-multimedia-full" again.
Do you have any other document about yocto and qt5, because it is really quite difficult for me to understand everything about yocto, freescale and qt5.

Thank you very much!
Best regards!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Dear Sir,

Just now, I deleted "alsa-utils-alsaconf" in my local.conf, and now the "bitbake fsl-image-multimedia-full" can run, I don't know whether it is good or not...

Best regards!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Dear Sir,

I see I should not use fsl-image-qt5, but use "bitbake fsl-image-multimedia-full". First I had "gst-fsl-plugin" error,
but now I have fixed it (referred to the fsl release note 2.0, updated the packagegroup names in the "IMAGE_INSTALL_append").
But there is one error "alsa-ultils-alsaconf is unbuildable" when I use "bitbake fsl-image-multimedia-full", can you help me?

Thanks
Best regards!

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Yesterday's email:

Dear Sir,
This time I tried the fsl-community-bsp(jethro branch),and the download of Linux-fslc is also ok now.
And I also download the meta-qt5(jethro branch), and referred to the "building qt5 using yocto
on wandboard",added many packages to the "Image_install_append"( is it necessary? cause there are already many recipes in meta-qt5).
The bitbake meta-tool chain-qt5 (MACHINE=imx6solosabreauto) is successful, but I only find the cross-toolchain, cannt find the rootfs to put on the riotboard.
Do I should use bitbake fsl-image-qt5 -c populate_sdk in my case?
Thank you very much!
Looking forward to receiving your reply!

Best regards!

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Yanxin ZHOU
Electronic Product Engineering
STAUBLI HANGZHOU LTD.
No 123 Weiken Street Hangzhou Economic & Technological Development Zone
310018 Hangzhou / CN
Phone: +86 40066 70066
Mobile: +86 18605811677
mailto: y.zhou@staubli.com
www.staubli.com
This e-mail and any attachment (the 'message') are confidential and privileged and intended solely for the person or the entity
to which it is addressed. If you have received it in error, please advise the sender by return e-mail and delete it immediately.
Any use not in accordance with its purpose, any dissemination or reproduction, either whole or partial, by entities other than
the intended recipient is strictly prohibited.
-----Original Message-----
From: ZHOU Yanxin 
Sent: 2016年4月17日 19:54
To: Otavio Salvador
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

Dear Sir,
This time I tried the fsl-community-bsp(jethro branch),and the download of Linux-fslc is also ok now.
And I also download the meta-qt5(jethro branch), and referred to the "building qt5 using yocto
on wandboard",added many packages to the "Image_install_append"( is it necessary? cause there are already many recipes in meta-qt5).
The bitbake meta-tool chain-qt5 (MACHINE=imx6solosabreauto) is successful, but I only find the cross-toolchain, cannt find the rootfs to put on the riotboard.
Do I should use bitbake fsl-image-qt5 -c populate_sdk in my case?
Thank you very much!
Looking forward to receiving your reply!
Best regards!

发自我的 iPhone

> 在 2016年4月12日，21:47，Otavio Salvador <otavio.salvador@ossystems.com.br> 写道：
> 
>> On Tue, Apr 12, 2016 at 10:26 AM, ZHOU Yanxin <y.zhou@staubli.com> wrote:
>> Let me describe the steps I did these days:
>> 1. Install necessary packages on my Ubuntu 14.04 LTS;
>> 2. Download the repo;
>> 3. repo init ... imx 3.14.52-1.1.0_ga;
>> 4. sudo repo sync;
>> 5. MACHINE=imx6solosabreauto source fsl-...sh -b build -e fb;
>> 6. I also modified the local.conf according to the "using yocto on wand board";
>> 7. bitbake meta-tool chain-qt5;
>> 
>> Yes, I use the Freescale public git, and download the fsl-arm-yocto-bsp.
>> Because I don't have my laptop and manuals around, maybe there will be some mistakes.
>> 
>> We use imx6solo, and we want to use qt5, and there are also c programs to control the real time tasks.we also will use the Xenomai technology.
>> 
>> And we are playing with the riotboard, our customized board now
>> Is being made, so we really want to solve this big problem.
> 
> I said FSL Community BSP, not NXP release. Check the doc here:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__freescale.github.io_doc_release-2Dnotes_2.0_&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=rI5uUVmsASzy2lUKNHkgXK5SV5p-rKJt1KTjp6xGCL8&e= 
> 
> 
> -- 
> Otavio Salvador                             O.S. Systems
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=ADdimzq0O-y0SlFILTk-GVJuB05iL5fj6mRFbzffSPU&e=         https://urldefense.proofpoint.com/v2/url?u=http-3A__code.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=7lylyBNdaJvy2vPlUvPFB13xWWGqZH5GFdDI-5M1v8s&e= 
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[ZHOU Yanxin]

Dear Sir，

The build is finished now, and I have the rootfs and cross-toolchain. I am now working on the qt5 deploy.
I also handle the ssh connection between qtcreator and the riotboard, but now there is one problem:
When I build the application, qtcreator says it can not find or load the qt platform plugin "xcb", I think I should 
Use linuxfb or eglfs, correct?

Thanks
Best regards!

Yanxin ZHOU
Electronic Product Engineering
STAUBLI HANGZHOU LTD.
No 123 Weiken Street Hangzhou Economic & Technological Development Zone
310018 Hangzhou / CN
Phone: +86 40066 70066
Mobile: +86 18605811677
mailto: y.zhou@staubli.com
www.staubli.com
This e-mail and any attachment (the 'message') are confidential and privileged and intended solely for the person or the entity
to which it is addressed. If you have received it in error, please advise the sender by return e-mail and delete it immediately.
Any use not in accordance with its purpose, any dissemination or reproduction, either whole or partial, by entities other than
the intended recipient is strictly prohibited.
-----Original Message-----
From: ZHOU Yanxin 
Sent: 2016年4月19日 9:15
To: 'Otavio Salvador'
Cc: 'meta-freescale@yoctoproject.org'
Subject: RE: [meta-freescale] [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

Dear Sir,

Finally I got a "do_rootfs " error, and I checked the log file, it says missing the "qt3d-tools", and I added one line on the local.conf: PACKAGECONFIG_DISTRO_pn-qtbase="accessibility".
Now I am doing "bitbake fsl-image-multimedia-full" again.
Do you have any other document about yocto and qt5, because it is really quite difficult for me to understand everything about yocto, freescale and qt5.

Thank you very much!
Best regards!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Dear Sir,

Just now, I deleted "alsa-utils-alsaconf" in my local.conf, and now the "bitbake fsl-image-multimedia-full" can run, I don't know whether it is good or not...

Best regards!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Dear Sir,

I see I should not use fsl-image-qt5, but use "bitbake fsl-image-multimedia-full". First I had "gst-fsl-plugin" error,
but now I have fixed it (referred to the fsl release note 2.0, updated the packagegroup names in the "IMAGE_INSTALL_append").
But there is one error "alsa-ultils-alsaconf is unbuildable" when I use "bitbake fsl-image-multimedia-full", can you help me?

Thanks
Best regards!

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Yesterday's email:

Dear Sir,
This time I tried the fsl-community-bsp(jethro branch),and the download of Linux-fslc is also ok now.
And I also download the meta-qt5(jethro branch), and referred to the "building qt5 using yocto
on wandboard",added many packages to the "Image_install_append"( is it necessary? cause there are already many recipes in meta-qt5).
The bitbake meta-tool chain-qt5 (MACHINE=imx6solosabreauto) is successful, but I only find the cross-toolchain, cannt find the rootfs to put on the riotboard.
Do I should use bitbake fsl-image-qt5 -c populate_sdk in my case?
Thank you very much!
Looking forward to receiving your reply!

Best regards!

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Yanxin ZHOU
Electronic Product Engineering
STAUBLI HANGZHOU LTD.
No 123 Weiken Street Hangzhou Economic & Technological Development Zone
310018 Hangzhou / CN
Phone: +86 40066 70066
Mobile: +86 18605811677
mailto: y.zhou@staubli.com
www.staubli.com
This e-mail and any attachment (the 'message') are confidential and privileged and intended solely for the person or the entity
to which it is addressed. If you have received it in error, please advise the sender by return e-mail and delete it immediately.
Any use not in accordance with its purpose, any dissemination or reproduction, either whole or partial, by entities other than
the intended recipient is strictly prohibited.
-----Original Message-----
From: ZHOU Yanxin 
Sent: 2016年4月17日 19:54
To: Otavio Salvador
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

Dear Sir,
This time I tried the fsl-community-bsp(jethro branch),and the download of Linux-fslc is also ok now.
And I also download the meta-qt5(jethro branch), and referred to the "building qt5 using yocto
on wandboard",added many packages to the "Image_install_append"( is it necessary? cause there are already many recipes in meta-qt5).
The bitbake meta-tool chain-qt5 (MACHINE=imx6solosabreauto) is successful, but I only find the cross-toolchain, cannt find the rootfs to put on the riotboard.
Do I should use bitbake fsl-image-qt5 -c populate_sdk in my case?
Thank you very much!
Looking forward to receiving your reply!
Best regards!

发自我的 iPhone

> 在 2016年4月12日，21:47，Otavio Salvador <otavio.salvador@ossystems.com.br> 写道：
> 
>> On Tue, Apr 12, 2016 at 10:26 AM, ZHOU Yanxin <y.zhou@staubli.com> wrote:
>> Let me describe the steps I did these days:
>> 1. Install necessary packages on my Ubuntu 14.04 LTS;
>> 2. Download the repo;
>> 3. repo init ... imx 3.14.52-1.1.0_ga;
>> 4. sudo repo sync;
>> 5. MACHINE=imx6solosabreauto source fsl-...sh -b build -e fb;
>> 6. I also modified the local.conf according to the "using yocto on wand board";
>> 7. bitbake meta-tool chain-qt5;
>> 
>> Yes, I use the Freescale public git, and download the fsl-arm-yocto-bsp.
>> Because I don't have my laptop and manuals around, maybe there will be some mistakes.
>> 
>> We use imx6solo, and we want to use qt5, and there are also c programs to control the real time tasks.we also will use the Xenomai technology.
>> 
>> And we are playing with the riotboard, our customized board now
>> Is being made, so we really want to solve this big problem.
> 
> I said FSL Community BSP, not NXP release. Check the doc here:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__freescale.github.io_doc_release-2Dnotes_2.0_&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=rI5uUVmsASzy2lUKNHkgXK5SV5p-rKJt1KTjp6xGCL8&e= 
> 
> 
> -- 
> Otavio Salvador                             O.S. Systems
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=ADdimzq0O-y0SlFILTk-GVJuB05iL5fj6mRFbzffSPU&e=         https://urldefense.proofpoint.com/v2/url?u=http-3A__code.ossystems.com.br&d=CwIBaQ&c=2s-ADuGVSPAUCa1HnsgOhA&r=vfIi17NQh0-6eyowN7wPkEhLl-GuLZHJsuTWI1c7u1s&m=o5Nm0dDpKFF5js35k610qV2PGI86kqwrh2AliU9X04c&s=7lylyBNdaJvy2vPlUvPFB13xWWGqZH5GFdDI-5M1v8s&e= 
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

[meta-fsl-arm][PATCH 01/27] linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA release

[Jun Zhu]

From: Lauren Post <lauren.post@freescale.com>

Signed-off-by: Lauren Post <lauren.post@freescale.com>
---
 ...LLVMLinux-use-static-inline-in-ARM-ftrace.patch | 48 ------------------
 ...nux-Change-extern-inline-to-static-inline.patch | 59 ----------------------
 ...Disable-imx6sl-specific-code-when-imx6sl-.patch |  0
 ...sdhc-imx-Fixup-runtime-PM-conditions-duri.patch |  0
 .../imx/defconfig                                  | 28 ++++++----
 ...ool_3.14.38.bb => linux-imx-mfgtool_3.14.52.bb} |  0
 recipes-kernel/linux/linux-imx_3.14.38.bb          | 43 ----------------
 recipes-kernel/linux/linux-imx_3.14.52.bb          | 23 +++++++++
 8 files changed, 42 insertions(+), 159 deletions(-)
 delete mode 100644 recipes-kernel/linux/linux-imx-3.14.38/0001-ARM-8158-LLVMLinux-use-static-inline-in-ARM-ftrace.patch
 delete mode 100644 recipes-kernel/linux/linux-imx-3.14.38/0001-ARM-LLVMLinux-Change-extern-inline-to-static-inline.patch
 rename recipes-kernel/linux/{linux-imx-3.14.38 => linux-imx-3.14.52}/0003-ARM-imx6sl-Disable-imx6sl-specific-code-when-imx6sl-.patch (100%)
 rename recipes-kernel/linux/{linux-imx-3.14.38 => linux-imx-3.14.52}/0004-mmc-sdhci-esdhc-imx-Fixup-runtime-PM-conditions-duri.patch (100%)
 rename recipes-kernel/linux/{linux-imx-3.14.38 => linux-imx-3.14.52}/imx/defconfig (94%)
 rename recipes-kernel/linux/{linux-imx-mfgtool_3.14.38.bb => linux-imx-mfgtool_3.14.52.bb} (100%)
 delete mode 100644 recipes-kernel/linux/linux-imx_3.14.38.bb
 create mode 100644 recipes-kernel/linux/linux-imx_3.14.52.bb

diff --git a/recipes-kernel/linux/linux-imx-3.14.38/0001-ARM-8158-LLVMLinux-use-static-inline-in-ARM-ftrace.patch b/recipes-kernel/linux/linux-imx-3.14.38/0001-ARM-8158-LLVMLinux-use-static-inline-in-ARM-ftrace.patch
deleted file mode 100644
index 47f13c7..0000000
--- a/recipes-kernel/linux/linux-imx-3.14.38/0001-ARM-8158-LLVMLinux-use-static-inline-in-ARM-ftrace.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From aeea3592a13bf12861943e44fc48f1f270941f8d Mon Sep 17 00:00:00 2001
-From: Behan Webster <behanw@converseincode.com>
-Date: Wed, 24 Sep 2014 01:06:46 +0100
-Subject: ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
-
-With compilers which follow the C99 standard (like modern versions of gcc and
-clang), "extern inline" does the wrong thing (emits code for an externally
-linkable version of the inline function). In this case using static inline
-and removing the NULL version of return_address in return_address.c does
-the right thing.
-
-Signed-off-by: Behan Webster <behanw@converseincode.com>
-Reviewed-by: Mark Charlebois <charlebm@gmail.com>
-Acked-by: Steven Rostedt <rostedt@goodmis.org>
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
-diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
-index 39eb16b..bfe2a2f 100644
---- a/arch/arm/include/asm/ftrace.h
-+++ b/arch/arm/include/asm/ftrace.h
-@@ -45,7 +45,7 @@ void *return_address(unsigned int);
- 
- #else
- 
--extern inline void *return_address(unsigned int level)
-+static inline void *return_address(unsigned int level)
- {
- 	return NULL;
- }
-diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
-index fafedd8..f6aa84d 100644
---- a/arch/arm/kernel/return_address.c
-+++ b/arch/arm/kernel/return_address.c
-@@ -63,11 +63,6 @@ void *return_address(unsigned int level)
- #warning "TODO: return_address should use unwind tables"
- #endif
- 
--void *return_address(unsigned int level)
--{
--	return NULL;
--}
--
- #endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
- 
- EXPORT_SYMBOL_GPL(return_address);
--- 
-cgit v0.10.2
-
diff --git a/recipes-kernel/linux/linux-imx-3.14.38/0001-ARM-LLVMLinux-Change-extern-inline-to-static-inline.patch b/recipes-kernel/linux/linux-imx-3.14.38/0001-ARM-LLVMLinux-Change-extern-inline-to-static-inline.patch
deleted file mode 100644
index 0ab03fb..0000000
--- a/recipes-kernel/linux/linux-imx-3.14.38/0001-ARM-LLVMLinux-Change-extern-inline-to-static-inline.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From a2561791169351cbf1ac5ca0c4299a0eef7eca65 Mon Sep 17 00:00:00 2001
-From: Behan Webster <behanw@converseincode.com>
-Date: Tue, 3 Sep 2013 22:27:26 -0400
-Subject: [PATCH] ARM: LLVMLinux: Change "extern inline" to "static inline" in
- glue-cache.h
-
-With compilers which follow the C99 standard (like modern versions of gcc and
-clang), "extern inline" does the wrong thing (emits code for an externally
-linkable version of the inline function). "static inline" is the correct choice
-instead.
-
-Author: Behan Webster <behanw@converseincode.com>
-Signed-off-by: Behan Webster <behanw@converseincode.com>
-Reviewed-by: Mark Charlebois <charlebm@gmail.com>
----
- arch/arm/include/asm/glue-cache.h | 22 +++++++++++-----------
- 1 file changed, 11 insertions(+), 11 deletions(-)
-
-diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h
-index c81adc0..a3c24cd 100644
---- a/arch/arm/include/asm/glue-cache.h
-+++ b/arch/arm/include/asm/glue-cache.h
-@@ -130,22 +130,22 @@
- #endif
- 
- #ifndef __ASSEMBLER__
--extern inline void nop_flush_icache_all(void) { }
--extern inline void nop_flush_kern_cache_all(void) { }
--extern inline void nop_flush_kern_cache_louis(void) { }
--extern inline void nop_flush_user_cache_all(void) { }
--extern inline void nop_flush_user_cache_range(unsigned long a,
-+static inline void nop_flush_icache_all(void) { }
-+static inline void nop_flush_kern_cache_all(void) { }
-+static inline void nop_flush_kern_cache_louis(void) { }
-+static inline void nop_flush_user_cache_all(void) { }
-+static inline void nop_flush_user_cache_range(unsigned long a,
- 		unsigned long b, unsigned int c) { }
- 
--extern inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { }
--extern inline int nop_coherent_user_range(unsigned long a,
-+static inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { }
-+static inline int nop_coherent_user_range(unsigned long a,
- 		unsigned long b) { return 0; }
--extern inline void nop_flush_kern_dcache_area(void *a, size_t s) { }
-+static inline void nop_flush_kern_dcache_area(void *a, size_t s) { }
- 
--extern inline void nop_dma_flush_range(const void *a, const void *b) { }
-+static inline void nop_dma_flush_range(const void *a, const void *b) { }
- 
--extern inline void nop_dma_map_area(const void *s, size_t l, int f) { }
--extern inline void nop_dma_unmap_area(const void *s, size_t l, int f) { }
-+static inline void nop_dma_map_area(const void *s, size_t l, int f) { }
-+static inline void nop_dma_unmap_area(const void *s, size_t l, int f) { }
- #endif
- 
- #ifndef MULTI_CACHE
--- 
-2.1.4
-
diff --git a/recipes-kernel/linux/linux-imx-3.14.38/0003-ARM-imx6sl-Disable-imx6sl-specific-code-when-imx6sl-.patch b/recipes-kernel/linux/linux-imx-3.14.52/0003-ARM-imx6sl-Disable-imx6sl-specific-code-when-imx6sl-.patch
similarity index 100%
rename from recipes-kernel/linux/linux-imx-3.14.38/0003-ARM-imx6sl-Disable-imx6sl-specific-code-when-imx6sl-.patch
rename to recipes-kernel/linux/linux-imx-3.14.52/0003-ARM-imx6sl-Disable-imx6sl-specific-code-when-imx6sl-.patch
diff --git a/recipes-kernel/linux/linux-imx-3.14.38/0004-mmc-sdhci-esdhc-imx-Fixup-runtime-PM-conditions-duri.patch b/recipes-kernel/linux/linux-imx-3.14.52/0004-mmc-sdhci-esdhc-imx-Fixup-runtime-PM-conditions-duri.patch
similarity index 100%
rename from recipes-kernel/linux/linux-imx-3.14.38/0004-mmc-sdhci-esdhc-imx-Fixup-runtime-PM-conditions-duri.patch
rename to recipes-kernel/linux/linux-imx-3.14.52/0004-mmc-sdhci-esdhc-imx-Fixup-runtime-PM-conditions-duri.patch
diff --git a/recipes-kernel/linux/linux-imx-3.14.38/imx/defconfig b/recipes-kernel/linux/linux-imx-3.14.52/imx/defconfig
similarity index 94%
rename from recipes-kernel/linux/linux-imx-3.14.38/imx/defconfig
rename to recipes-kernel/linux/linux-imx-3.14.52/imx/defconfig
index dd9f739..e3315f3 100644
--- a/recipes-kernel/linux/linux-imx-3.14.38/imx/defconfig
+++ b/recipes-kernel/linux/linux-imx-3.14.52/imx/defconfig
@@ -80,7 +80,6 @@ CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
 CONFIG_BT_HCIBTUSB=y
-CONFIG_BT_HCIBTSDIO=y
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -117,6 +116,8 @@ CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_SENSORS_FXOS8700=y
+CONFIG_SENSORS_FXAS2100X=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 # CONFIG_SCSI_PROC_FS is not set
@@ -145,33 +146,38 @@ CONFIG_SMC91X=y
 CONFIG_SMC911X=y
 CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_MICREL_PHY=y
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_CDC_EEM=m
-CONFIG_ATH_CARDS=y
-CONFIG_ATH6KL=m
-CONFIG_ATH6KL_SDIO=m
-CONFIG_BRCMFMAC=m
+CONFIG_BCMDHD=m
+CONFIG_BCMDHD_SDIO=y
+CONFIG_BCMDHD_FW_PATH="/lib/firmware/bcm/fw_bcmdhd.bin"
+CONFIG_BCMDHD_NVRAM_PATH="/lib/firmware/bcm/bcmdhd.cal"
+# CONFIG_RTL_CARDS is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_SNVS_PWRKEY=y
 CONFIG_KEYBOARD_IMX=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_TOUCHSCREEN_EGALAX=y
 CONFIG_TOUCHSCREEN_ELAN=y
 CONFIG_TOUCHSCREEN_MAX11801=y
+CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
 CONFIG_TOUCHSCREEN_MC13783=y
 CONFIG_TOUCHSCREEN_TSC2007=y
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MMA8450=y
 CONFIG_INPUT_ISL29023=y
+CONFIG_INPUT_MPL3115=y
+CONFIG_SENSOR_FXLS8471=y
 CONFIG_SERIO_SERPORT=m
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
@@ -194,7 +200,6 @@ CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_74X164=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_SABRESD_MAX8903=y
-CONFIG_IMX6_USB_CHARGER=y
 CONFIG_SENSORS_MAX17135=y
 CONFIG_SENSORS_MAG3110=y
 CONFIG_THERMAL=y
@@ -213,6 +218,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MAX17135=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
@@ -237,6 +243,8 @@ CONFIG_VIDEO_MXC_IPU_OUTPUT=y
 CONFIG_VIDEO_MXC_PXP_V4L2=y
 CONFIG_VIDEO_MXC_CSI_CAMERA=m
 CONFIG_MXC_VADC=m
+CONFIG_MXC_MIPI_CSI=m
+CONFIG_MXC_CAMERA_OV5647_MIPI=m
 CONFIG_SOC_CAMERA=y
 CONFIG_VIDEO_MX3=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
@@ -256,6 +264,7 @@ CONFIG_BACKLIGHT_PWM=y
 CONFIG_FB_MXC_SYNC_PANEL=y
 CONFIG_FB_MXC_LDB=y
 CONFIG_FB_MXC_MIPI_DSI=y
+CONFIG_FB_MXC_MIPI_DSI_SAMSUNG=y
 CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL=y
 CONFIG_FB_MXC_HDMI=y
 CONFIG_FB_MXC_EINK_PANEL=y
@@ -284,9 +293,11 @@ CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_SND_SOC_IMX_HDMI=y
 CONFIG_SND_SOC_IMX_SI476X=y
 CONFIG_USB=y
+CONFIG_USB_OTG_WHITELIST=y
 CONFIG_USB_OTG_FSM=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_HCD_TEST_MODE=y
 CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
@@ -296,7 +307,7 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_EHSET_TEST_FIXTURE=m
+CONFIG_USB_EHSET_TEST_FIXTURE=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
@@ -327,7 +338,6 @@ CONFIG_MXC_IPU=y
 CONFIG_MXC_GPU_VIV=y
 CONFIG_MXC_IPU_V3_PRE=y
 CONFIG_MXC_MIPI_CSI2=y
-CONFIG_MXC_MLB150=m
 CONFIG_MXC_SIM=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
diff --git a/recipes-kernel/linux/linux-imx-mfgtool_3.14.38.bb b/recipes-kernel/linux/linux-imx-mfgtool_3.14.52.bb
similarity index 100%
rename from recipes-kernel/linux/linux-imx-mfgtool_3.14.38.bb
rename to recipes-kernel/linux/linux-imx-mfgtool_3.14.52.bb
diff --git a/recipes-kernel/linux/linux-imx_3.14.38.bb b/recipes-kernel/linux/linux-imx_3.14.38.bb
deleted file mode 100644
index 886298f..0000000
--- a/recipes-kernel/linux/linux-imx_3.14.38.bb
+++ /dev/null
@@ -1,43 +0,0 @@
-# Copyright (C) 2013-2015 Freescale Semiconductor
-# Released under the MIT license (see COPYING.MIT for the terms)
-
-SUMMARY = "Linux Kernel provided and supported by Freescale"
-DESCRIPTION = "Linux Kernel provided and supported by Freescale with focus on \
-i.MX Family Reference Boards. It includes support for many IPs such as GPU, VPU and IPU."
-
-require recipes-kernel/linux/linux-imx.inc
-require recipes-kernel/linux/linux-dtb.inc
-
-DEPENDS += "lzop-native bc-native"
-
-SRCBRANCH_mx6q = "imx_3.14.38_6qp_ga"
-LOCALVERSION_mx6q = "-6QuadPlus"
-SRCREV_mx6q = "75a01115a7f53d728e6abeb7b205676cc2a50bc0"
-
-SRCBRANCH_mx6dl = "imx_3.14.38_6qp_ga"
-LOCALVERSION_mx6dl = "-6DualLite"
-SRCREV_mx6dl = "75a01115a7f53d728e6abeb7b205676cc2a50bc0"
-
-SRCBRANCH_mx6sx = "imx_3.14.38_6qp_ga"
-LOCALVERSION_mx6sx = "-6SoloX"
-SRCREV_mx6sx = "75a01115a7f53d728e6abeb7b205676cc2a50bc0"
-
-SRCBRANCH_mx6sl = "imx_3.14.38_6qp_ga"
-LOCALVERSION_mx6sl = "-6SOloLite"
-SRCREV_mx6sl = "75a01115a7f53d728e6abeb7b205676cc2a50bc0"
-
-SRCBRANCH_mx6ul = "imx_3.14.38_6ul_ga"
-LOCALVERSION_mx6ul = "-6UltraLite"
-SRCREV_mx6ul = "e4944a51c4bb950a8f13e421eefc000a87350e23"
-
-SRCBRANCH_mx7 = "imx_3.14.38_6ul_ga"
-LOCALVERSION_mx7 = "-7Dual_beta"
-SRCREV_mx7 = "e4944a51c4bb950a8f13e421eefc000a87350e23"
-
-SRC_URI += " \
-    file://0004-mmc-sdhci-esdhc-imx-Fixup-runtime-PM-conditions-duri.patch \
-    file://0001-ARM-LLVMLinux-Change-extern-inline-to-static-inline.patch \
-    file://0001-ARM-8158-LLVMLinux-use-static-inline-in-ARM-ftrace.patch \
-"
-
-COMPATIBLE_MACHINE = "(mx6|mx6ul|mx7)"
diff --git a/recipes-kernel/linux/linux-imx_3.14.52.bb b/recipes-kernel/linux/linux-imx_3.14.52.bb
new file mode 100644
index 0000000..bd54de2
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx_3.14.52.bb
@@ -0,0 +1,23 @@
+# Copyright (C) 2013-2015 Freescale Semiconductor
+# Released under the MIT license (see COPYING.MIT for the terms)
+
+SUMMARY = "Linux Kernel provided and supported by Freescale"
+DESCRIPTION = "Linux Kernel provided and supported by Freescale with focus on \
+i.MX Family Reference Boards. It includes support for many IPs such as GPU, VPU and IPU."
+
+require recipes-kernel/linux/linux-imx.inc
+require recipes-kernel/linux/linux-dtb.inc
+
+DEPENDS += "lzop-native bc-native"
+
+SRCBRANCH = "imx_3.14.52_1.1.0_ga"
+LOCALVERSION = "-1.1.0_ga"
+SRCREV = "5f6f0a50e6039370078369ddf380179d59024789"
+
+SRC_URI += " \
+    file://0004-mmc-sdhci-esdhc-imx-Fixup-runtime-PM-conditions-duri.patch \
+"
+
+DEFAULT_PREFERENCE = "1"
+
+COMPATIBLE_MACHINE = "(mx6|mx6ul|mx7)"
-- 
1.9.1