All of lore.kernel.org
 help / color / mirror / Atom feed
* 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-08 22:06 Rafael J. Wysocki
  2010-06-08 22:06   ` Rafael J. Wysocki
                   ` (17 more replies)
  0 siblings, 18 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:06 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Maciej Rutecki, Andrew Morton, Linus Torvalds,
	Kernel Testers List, Network Development, Linux ACPI,
	Linux PM List, Linux SCSI List, Linux Wireless List, DRI

[NOTES:
 * This by no means is a complete list, but we only put e-mail reports that
   are at least 1 week old into the Bugzilla.
 * Quite a few of the already reported regressions may be related to the bug
   fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
   bug in scrup, vt.c"), so reporters please retest with this commit applied.]

This message contains a list of some regressions from 2.6.34,
for which there are no fixes in the mainline known to the tracking team.
If any of them have been fixed already, please let us know.

If you know of any other unresolved regressions from 2.6.34, please let us
know either and we'll add them to the list.  Also, please let us know
if any of the entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply
to this message with CCs to the people involved in reporting and handling
the issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2010-06-09       15       13          10


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
Subject		: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
Submitter	: David John <davidjon@xenontk.org>
Date		: 2010-06-02 12:52 (7 days old)
Message-ID	: <4C065423.3000202@xenontk.org>
References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16161
Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
Submitter	: Mikael Pettersson <mikpe@it.uu.se>
Date		: 2010-06-01 19:57 (8 days old)
Message-ID	: <19461.26166.427857.612983@pilspetsen.it.uu.se>
References	: http://marc.info/?l=linux-kernel&m=127542227511925&w=2


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16160
Subject		: 2.6.35 Radeon KMS power management regression?
Submitter	: Nigel Cunningham <ncunningham@crca.org.au>
Date		: 2010-06-01 6:23 (8 days old)
Message-ID	: <4C04A767.8000209@crca.org.au>
References	: http://marc.info/?l=linux-kernel&m=127537343722290&w=2


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16145
Subject		: Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable"
Submitter	: Tom Gundersen <teg@jklm.no>
Date		: 2010-06-07 13:11 (2 days old)
Handled-By	: Venkatesh Pallipadi <venki@google.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
Subject		: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
Submitter	: Jan Kreuzer <kontrollator@gmx.de>
Date		: 2010-06-05 06:15 (4 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
Subject		: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2010-06-04 13:18 (5 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16120
Subject		: Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
Submitter	: Alex Zhavnerchik <alex.vizor@gmail.com>
Date		: 2010-06-04 09:25 (5 days old)
Handled-By	: Eric Dumazet <eric.dumazet@gmail.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16104
Subject		: Radeon KMS does not start after merge of the new PM-Code
Submitter	: Jan Kreuzer <kontrollator@gmx.de>
Date		: 2010-06-02 07:47 (7 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16090
Subject		: sysfs: cannot create duplicate filename
Submitter	: Tobias <devnull@plzk.org>
Date		: 2010-06-01 15:59 (8 days old)
Handled-By	: Jesse Barnes <jbarnes@virtuousgeek.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
Subject		: NULL Pointer dereference in __ir_input_register/budget_ci_attach
Submitter	: Sean Finney <seanius@debian.org>
Date		: 2010-05-23 19:52 (17 days old)


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16131
Subject		: kernel BUG at fs/btrfs/extent-tree.c:4363 (btrfs_free_tree_block)
Submitter	: Chow Loong Jin <hyperair@ubuntu.com>
Date		: 2010-06-05 18:53 (4 days old)
Handled-By	: Yan Zheng <zheng.yan@oracle.com>
Patch		: https://patchwork.kernel.org/patch/103235/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16127
Subject		: Boot freeze on HP Compaq nx6325 (RS482) with Radeon KMS
Submitter	: Jure Repinc <jlp.bugs@gmail.com>
Date		: 2010-06-04 21:14 (5 days old)
Handled-By	: Dave Airlie <airlied@linux.ie>
Patch		: https://bugzilla.kernel.org/attachment.cgi?id=26677


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16092
Subject		: Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
Submitter	: Christian Casteyde <casteyde.christian@free.fr>
Date		: 2010-06-01 18:08 (8 days old)
Handled-By	: Venki <venki@google.com>
Patch		: https://bugzilla.kernel.org/show_bug.cgi?id=16092#c2


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.34,
unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=16055

Please let the tracking team know if there are any Bugzilla entries that
should be added to the list in there.

Thanks!


^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16037] NULL Pointer dereference in __ir_input_register/budget_ci_attach
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
@ 2010-06-08 22:06   ` Rafael J. Wysocki
  2010-06-08 22:10   ` Rafael J. Wysocki
                     ` (16 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:06 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Sean Finney

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
Subject		: NULL Pointer dereference in __ir_input_register/budget_ci_attach
Submitter	: Sean Finney <seanius@debian.org>
Date		: 2010-05-23 19:52 (17 days old)



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16037] NULL Pointer dereference in __ir_input_register/budget_ci_attach
@ 2010-06-08 22:06   ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:06 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Sean Finney

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
Subject		: NULL Pointer dereference in __ir_input_register/budget_ci_attach
Submitter	: Sean Finney <seanius-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
Date		: 2010-05-23 19:52 (17 days old)


^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16129] BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
                   ` (6 preceding siblings ...)
  2010-06-08 22:10   ` Rafael J. Wysocki
@ 2010-06-08 22:10 ` Rafael J. Wysocki
  2010-06-08 22:10 ` [Bug #16160] 2.6.35 Radeon KMS power management regression? Rafael J. Wysocki
                   ` (9 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Jan Kreuzer

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
Subject		: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
Submitter	: Jan Kreuzer <kontrollator@gmx.de>
Date		: 2010-06-05 06:15 (4 days old)



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16127] Boot freeze on HP Compaq nx6325 (RS482) with Radeon KMS
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
  2010-06-08 22:06   ` Rafael J. Wysocki
  2010-06-08 22:10   ` Rafael J. Wysocki
@ 2010-06-08 22:10 ` Rafael J. Wysocki
  2010-06-08 22:10 ` [Bug #16090] sysfs: cannot create duplicate filename Rafael J. Wysocki
                   ` (14 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Dave Airlie, Jure Repinc

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16127
Subject		: Boot freeze on HP Compaq nx6325 (RS482) with Radeon KMS
Submitter	: Jure Repinc <jlp.bugs@gmail.com>
Date		: 2010-06-04 21:14 (5 days old)
Handled-By	: Dave Airlie <airlied@linux.ie>
Patch		: https://bugzilla.kernel.org/attachment.cgi?id=26677



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16120] Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  2010-06-08 22:10   ` Rafael J. Wysocki
                     ` (16 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Alex Zhavnerchik, Eric Dumazet

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16120
Subject		: Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
Submitter	: Alex Zhavnerchik <alex.vizor@gmail.com>
Date		: 2010-06-04 09:25 (5 days old)
Handled-By	: Eric Dumazet <eric.dumazet@gmail.com>



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16090] sysfs: cannot create duplicate filename
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
                   ` (2 preceding siblings ...)
  2010-06-08 22:10 ` [Bug #16127] Boot freeze on HP Compaq nx6325 (RS482) with Radeon KMS Rafael J. Wysocki
@ 2010-06-08 22:10 ` Rafael J. Wysocki
  2010-06-08 22:10   ` Rafael J. Wysocki
                   ` (13 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Alex Chiang, Jesse Barnes, Tobias

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16090
Subject		: sysfs: cannot create duplicate filename
Submitter	: Tobias <devnull@plzk.org>
Date		: 2010-06-01 15:59 (8 days old)
Handled-By	: Jesse Barnes <jbarnes@virtuousgeek.org>



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16104] Radeon KMS does not start after merge of the new PM-Code
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  2010-06-08 22:10   ` Rafael J. Wysocki
                     ` (16 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Jan Kreuzer

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16104
Subject		: Radeon KMS does not start after merge of the new PM-Code
Submitter	: Jan Kreuzer <kontrollator@gmx.de>
Date		: 2010-06-02 07:47 (7 days old)



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16092] Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  2010-06-08 22:10   ` Rafael J. Wysocki
                     ` (16 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Christian Casteyde, Venki

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16092
Subject		: Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
Submitter	: Christian Casteyde <casteyde.christian@free.fr>
Date		: 2010-06-01 18:08 (8 days old)
Handled-By	: Venki <venki@google.com>
Patch		: https://bugzilla.kernel.org/show_bug.cgi?id=16092#c2



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16122] 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  2010-06-08 22:10   ` Rafael J. Wysocki
                     ` (16 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Larry Finger

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
Subject		: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2010-06-04 13:18 (5 days old)



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16104] Radeon KMS does not start after merge of the new PM-Code
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Jan Kreuzer

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16104
Subject		: Radeon KMS does not start after merge of the new PM-Code
Submitter	: Jan Kreuzer <kontrollator-Mmb7MZpHnFY@public.gmane.org>
Date		: 2010-06-02 07:47 (7 days old)


^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16092] Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Christian Casteyde, Venki

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16092
Subject		: Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
Submitter	: Christian Casteyde <casteyde.christian-GANU6spQydw@public.gmane.org>
Date		: 2010-06-01 18:08 (8 days old)
Handled-By	: Venki <venki-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
Patch		: https://bugzilla.kernel.org/show_bug.cgi?id=16092#c2


^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16120] Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Alex Zhavnerchik, Eric Dumazet

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16120
Subject		: Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
Submitter	: Alex Zhavnerchik <alex.vizor-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2010-06-04 09:25 (5 days old)
Handled-By	: Eric Dumazet <eric.dumazet-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>


^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16122] 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Larry Finger

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
Subject		: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2010-06-04 13:18 (5 days old)


^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  2010-06-08 22:10   ` Rafael J. Wysocki
                     ` (16 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Mikael Pettersson

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16161
Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
Submitter	: Mikael Pettersson <mikpe@it.uu.se>
Date		: 2010-06-01 19:57 (8 days old)
Message-ID	: <19461.26166.427857.612983@pilspetsen.it.uu.se>
References	: http://marc.info/?l=linux-kernel&m=127542227511925&w=2



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16145] Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable"
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
                   ` (9 preceding siblings ...)
  2010-06-08 22:10   ` Rafael J. Wysocki
@ 2010-06-08 22:10 ` Rafael J. Wysocki
  2010-06-08 22:10   ` Rafael J. Wysocki
                   ` (6 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Tom Gundersen, Venkatesh Pallipadi

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16145
Subject		: Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable"
Submitter	: Tom Gundersen <teg@jklm.no>
Date		: 2010-06-07 13:11 (2 days old)
Handled-By	: Venkatesh Pallipadi <venki@google.com>



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16160] 2.6.35 Radeon KMS power management regression?
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
                   ` (7 preceding siblings ...)
  2010-06-08 22:10 ` [Bug #16129] BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2 Rafael J. Wysocki
@ 2010-06-08 22:10 ` Rafael J. Wysocki
  2010-06-08 22:10   ` Rafael J. Wysocki
                   ` (8 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Nigel Cunningham

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16160
Subject		: 2.6.35 Radeon KMS power management regression?
Submitter	: Nigel Cunningham <ncunningham@crca.org.au>
Date		: 2010-06-01 6:23 (8 days old)
Message-ID	: <4C04A767.8000209@crca.org.au>
References	: http://marc.info/?l=linux-kernel&m=127537343722290&w=2



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16131] kernel BUG at fs/btrfs/extent-tree.c:4363 (btrfs_free_tree_block)
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  2010-06-08 22:10   ` Rafael J. Wysocki
                     ` (16 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Chow Loong Jin, Yan Zheng

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16131
Subject		: kernel BUG at fs/btrfs/extent-tree.c:4363 (btrfs_free_tree_block)
Submitter	: Chow Loong Jin <hyperair@ubuntu.com>
Date		: 2010-06-05 18:53 (4 days old)
Handled-By	: Yan Zheng <zheng.yan@oracle.com>
Patch		: https://patchwork.kernel.org/patch/103235/



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Mikael Pettersson

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16161
Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
Submitter	: Mikael Pettersson <mikpe-1zs4UD6AkMk@public.gmane.org>
Date		: 2010-06-01 19:57 (8 days old)
Message-ID	: <19461.26166.427857.612983-tgku4HJDRZih8lFjZTKsyTAV6s6igYVG@public.gmane.org>
References	: http://marc.info/?l=linux-kernel&m=127542227511925&w=2


^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16131] kernel BUG at fs/btrfs/extent-tree.c:4363 (btrfs_free_tree_block)
@ 2010-06-08 22:10   ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Chow Loong Jin, Yan Zheng

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16131
Subject		: kernel BUG at fs/btrfs/extent-tree.c:4363 (btrfs_free_tree_block)
Submitter	: Chow Loong Jin <hyperair-GeWIH/nMZzLQT0dZR+AlfA@public.gmane.org>
Date		: 2010-06-05 18:53 (4 days old)
Handled-By	: Yan Zheng <zheng.yan-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Patch		: https://patchwork.kernel.org/patch/103235/


^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16163] [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
                   ` (11 preceding siblings ...)
  2010-06-08 22:10   ` Rafael J. Wysocki
@ 2010-06-08 22:10 ` Rafael J. Wysocki
  2010-06-09  1:53   ` Linus Torvalds
                   ` (4 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-08 22:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Maciej Rutecki, David John

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
Subject		: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
Submitter	: David John <davidjon@xenontk.org>
Date		: 2010-06-02 12:52 (7 days old)
Message-ID	: <4C065423.3000202@xenontk.org>
References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2



^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
  2010-06-08 22:06   ` Rafael J. Wysocki
@ 2010-06-09  1:53   ` Linus Torvalds
  2010-06-08 22:10 ` [Bug #16127] Boot freeze on HP Compaq nx6325 (RS482) with Radeon KMS Rafael J. Wysocki
                     ` (15 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Linus Torvalds @ 2010-06-09  1:53 UTC (permalink / raw)
  To: Rafael J. Wysocki, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Jens Axboe, Dave Airlie, Jesse Barnes, Ingo Molnar,
	David Härdeman, Mauro Carvalho Chehab, Eric Dumazet
  Cc: Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
	Kernel Testers List, Network Development, Linux ACPI,
	Linux PM List, Linux SCSI List, Linux Wireless List, DRI



[ Added lots of cc's to direct specific people to look at the regressions 
  that may or may not be theirs... ]

On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
>
>  * Quite a few of the already reported regressions may be related to the bug
>    fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
>    bug in scrup, vt.c"), so reporters please retest with this commit applied.]

>From a quick look, most of them look unrelated to that unfortunate bug. 
It's hard to tell for sure, of course (memory corruption can do pretty 
much anything), but I'm not seeing the 07200720.. pattern at least.

And some of them do seem to be bisected to likely culprits and/or have 
patches that are claimed to have fixed them.

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> Submitter	: David John <davidjon@xenontk.org>
> Date		: 2010-06-02 12:52 (7 days old)
> Message-ID	: <4C065423.3000202@xenontk.org>
> References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2

That has a "reverting the commit fixes it", and a confirmation from Nick 
Bowler.

Eric, Carl: should I just revert that commit? Or do you have a fix?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16145
> Subject	: Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable"
> Submitter	: Tom Gundersen <teg@jklm.no>
> Date		: 2010-06-07 13:11 (2 days old)
> Handled-By	: Venkatesh Pallipadi <venki@google.com>

Hmm. This does seem to be a properly bisected commit, but at the same time 
it looks from the bugzilla like it's just pure luck on that machine that 
the acpi_pad driver happened to mark TSC unstable - so while the commit 
bisected is the real one, it's not the "deeper reason" for the problem.

Venki, any updates?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> Date		: 2010-06-05 06:15 (4 days old)

This seems to have been introduced by

	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
	Author: Ingo Molnar <mingo@elte.hu>
	Date:   Sat Nov 8 17:05:38 2008 +0100

	    sched: optimize sched_clock() a bit
    
	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
	    variant of __cycles_2_ns().
    
	    Most of the time sched_clock() is called with irqs disabled already.
	    The few places that call it with irqs enabled need to be updated.
    
	    Signed-off-by: Ingo Molnar <mingo@elte.hu>

and this seems to be one of those calling cases that need to be updated.

Ingo? The call trace is:

	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
	caller is native_sched_clock+0x3c/0x68
	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
	Call Trace:
	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
	[<ffffffff8101043d>] sched_clock+0x9/0xd
	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
	[<ffffffff81215537>] __make_request+0x338/0x45b
	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
	[<ffffffff81214909>] submit_bio+0xd2/0xef
	[<ffffffff811413cb>] submit_bh+0xf4/0x116
	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
	[<ffffffff81144875>] block_write_full_page+0x15/0x17
	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
	[<ffffffff810e1f91>] __writepage+0x1a/0x39
	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
	[<ffffffff810e3406>] generic_writepages+0x27/0x29
	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
	[<ffffffff811d0cba>] kjournald2+0x147/0x37a

(from the bugzilla thing)

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
> Subject	: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
> Date		: 2010-06-04 13:18 (5 days old)

Jens?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16120
> Subject	: Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
> Submitter	: Alex Zhavnerchik <alex.vizor@gmail.com>
> Date		: 2010-06-04 09:25 (5 days old)
> Handled-By	: Eric Dumazet <eric.dumazet@gmail.com>

This one seems to have a patch in bugzilla.

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16104
> Subject	: Radeon KMS does not start after merge of the new PM-Code
> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> Date		: 2010-06-02 07:47 (7 days old)

This one also has a patch in Bugzilla, I think Airlie is just waiting to 
calm down his queue and already removed the dependency on the temperature 
code. DaveA?

> Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=16161
> Subject       : [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
> Submitter     : Mikael Pettersson <mikpe@it.uu.se>
> Date          : 2010-06-01 19:57 (8 days old)
> Message-ID    : <19461.26166.427857.612983@pilspetsen.it.uu.se>
> References    : http://marc.info/?l=linux-kernel&m=127542227511925&w=2
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16090
> Subject	: sysfs: cannot create duplicate filename
> Submitter	: Tobias <devnull@plzk.org>
> Date		: 2010-06-01 15:59 (8 days old)
> Handled-By	: Jesse Barnes <jbarnes@virtuousgeek.org>

These two look related. Both are related to that "slot" thing in sysfs 
PCI, but only one of them is marked as Jesse's. Jesse?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
> Submitter	: Sean Finney <seanius@debian.org>
> Date		: 2010-05-23 19:52 (17 days old)

Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?

David Härdeman, Mauro Carvalho Chehab added to cc.

				Linus

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  1:53   ` Linus Torvalds
  0 siblings, 0 replies; 129+ messages in thread
From: Linus Torvalds @ 2010-06-09  1:53 UTC (permalink / raw)
  To: Rafael J. Wysocki, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Jens Axboe
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, Andrew Morton,
	Kernel Testers List, Linux PM List, Maciej Rutecki



[ Added lots of cc's to direct specific people to look at the regressions 
  that may or may not be theirs... ]

On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
>
>  * Quite a few of the already reported regressions may be related to the bug
>    fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
>    bug in scrup, vt.c"), so reporters please retest with this commit applied.]

>From a quick look, most of them look unrelated to that unfortunate bug. 
It's hard to tell for sure, of course (memory corruption can do pretty 
much anything), but I'm not seeing the 07200720.. pattern at least.

And some of them do seem to be bisected to likely culprits and/or have 
patches that are claimed to have fixed them.

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> Submitter	: David John <davidjon@xenontk.org>
> Date		: 2010-06-02 12:52 (7 days old)
> Message-ID	: <4C065423.3000202@xenontk.org>
> References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2

That has a "reverting the commit fixes it", and a confirmation from Nick 
Bowler.

Eric, Carl: should I just revert that commit? Or do you have a fix?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16145
> Subject	: Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable"
> Submitter	: Tom Gundersen <teg@jklm.no>
> Date		: 2010-06-07 13:11 (2 days old)
> Handled-By	: Venkatesh Pallipadi <venki@google.com>

Hmm. This does seem to be a properly bisected commit, but at the same time 
it looks from the bugzilla like it's just pure luck on that machine that 
the acpi_pad driver happened to mark TSC unstable - so while the commit 
bisected is the real one, it's not the "deeper reason" for the problem.

Venki, any updates?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> Date		: 2010-06-05 06:15 (4 days old)

This seems to have been introduced by

	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
	Author: Ingo Molnar <mingo@elte.hu>
	Date:   Sat Nov 8 17:05:38 2008 +0100

	    sched: optimize sched_clock() a bit
    
	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
	    variant of __cycles_2_ns().
    
	    Most of the time sched_clock() is called with irqs disabled already.
	    The few places that call it with irqs enabled need to be updated.
    
	    Signed-off-by: Ingo Molnar <mingo@elte.hu>

and this seems to be one of those calling cases that need to be updated.

Ingo? The call trace is:

	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
	caller is native_sched_clock+0x3c/0x68
	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
	Call Trace:
	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
	[<ffffffff8101043d>] sched_clock+0x9/0xd
	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
	[<ffffffff81215537>] __make_request+0x338/0x45b
	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
	[<ffffffff81214909>] submit_bio+0xd2/0xef
	[<ffffffff811413cb>] submit_bh+0xf4/0x116
	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
	[<ffffffff81144875>] block_write_full_page+0x15/0x17
	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
	[<ffffffff810e1f91>] __writepage+0x1a/0x39
	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
	[<ffffffff810e3406>] generic_writepages+0x27/0x29
	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
	[<ffffffff811d0cba>] kjournald2+0x147/0x37a

(from the bugzilla thing)

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
> Subject	: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
> Date		: 2010-06-04 13:18 (5 days old)

Jens?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16120
> Subject	: Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
> Submitter	: Alex Zhavnerchik <alex.vizor@gmail.com>
> Date		: 2010-06-04 09:25 (5 days old)
> Handled-By	: Eric Dumazet <eric.dumazet@gmail.com>

This one seems to have a patch in bugzilla.

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16104
> Subject	: Radeon KMS does not start after merge of the new PM-Code
> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> Date		: 2010-06-02 07:47 (7 days old)

This one also has a patch in Bugzilla, I think Airlie is just waiting to 
calm down his queue and already removed the dependency on the temperature 
code. DaveA?

> Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=16161
> Subject       : [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
> Submitter     : Mikael Pettersson <mikpe@it.uu.se>
> Date          : 2010-06-01 19:57 (8 days old)
> Message-ID    : <19461.26166.427857.612983@pilspetsen.it.uu.se>
> References    : http://marc.info/?l=linux-kernel&m=127542227511925&w=2
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16090
> Subject	: sysfs: cannot create duplicate filename
> Submitter	: Tobias <devnull@plzk.org>
> Date		: 2010-06-01 15:59 (8 days old)
> Handled-By	: Jesse Barnes <jbarnes@virtuousgeek.org>

These two look related. Both are related to that "slot" thing in sysfs 
PCI, but only one of them is marked as Jesse's. Jesse?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
> Submitter	: Sean Finney <seanius@debian.org>
> Date		: 2010-05-23 19:52 (17 days old)

Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?

David Härdeman, Mauro Carvalho Chehab added to cc.

				Linus

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
                   ` (13 preceding siblings ...)
  2010-06-09  1:53   ` Linus Torvalds
@ 2010-06-09  1:53 ` Linus Torvalds
  2010-06-09  9:02 ` Sedat Dilek
                   ` (2 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Linus Torvalds @ 2010-06-09  1:53 UTC (permalink / raw)
  To: Rafael J. Wysocki, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Jens Axboe, Dave
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, Andrew Morton,
	Kernel Testers List, Linux PM List, Maciej Rutecki



[ Added lots of cc's to direct specific people to look at the regressions 
  that may or may not be theirs... ]

On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
>
>  * Quite a few of the already reported regressions may be related to the bug
>    fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
>    bug in scrup, vt.c"), so reporters please retest with this commit applied.]

>From a quick look, most of them look unrelated to that unfortunate bug. 
It's hard to tell for sure, of course (memory corruption can do pretty 
much anything), but I'm not seeing the 07200720.. pattern at least.

And some of them do seem to be bisected to likely culprits and/or have 
patches that are claimed to have fixed them.

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> Submitter	: David John <davidjon@xenontk.org>
> Date		: 2010-06-02 12:52 (7 days old)
> Message-ID	: <4C065423.3000202@xenontk.org>
> References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2

That has a "reverting the commit fixes it", and a confirmation from Nick 
Bowler.

Eric, Carl: should I just revert that commit? Or do you have a fix?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16145
> Subject	: Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable"
> Submitter	: Tom Gundersen <teg@jklm.no>
> Date		: 2010-06-07 13:11 (2 days old)
> Handled-By	: Venkatesh Pallipadi <venki@google.com>

Hmm. This does seem to be a properly bisected commit, but at the same time 
it looks from the bugzilla like it's just pure luck on that machine that 
the acpi_pad driver happened to mark TSC unstable - so while the commit 
bisected is the real one, it's not the "deeper reason" for the problem.

Venki, any updates?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> Date		: 2010-06-05 06:15 (4 days old)

This seems to have been introduced by

	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
	Author: Ingo Molnar <mingo@elte.hu>
	Date:   Sat Nov 8 17:05:38 2008 +0100

	    sched: optimize sched_clock() a bit
    
	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
	    variant of __cycles_2_ns().
    
	    Most of the time sched_clock() is called with irqs disabled already.
	    The few places that call it with irqs enabled need to be updated.
    
	    Signed-off-by: Ingo Molnar <mingo@elte.hu>

and this seems to be one of those calling cases that need to be updated.

Ingo? The call trace is:

	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
	caller is native_sched_clock+0x3c/0x68
	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
	Call Trace:
	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
	[<ffffffff8101043d>] sched_clock+0x9/0xd
	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
	[<ffffffff81215537>] __make_request+0x338/0x45b
	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
	[<ffffffff81214909>] submit_bio+0xd2/0xef
	[<ffffffff811413cb>] submit_bh+0xf4/0x116
	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
	[<ffffffff81144875>] block_write_full_page+0x15/0x17
	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
	[<ffffffff810e1f91>] __writepage+0x1a/0x39
	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
	[<ffffffff810e3406>] generic_writepages+0x27/0x29
	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
	[<ffffffff811d0cba>] kjournald2+0x147/0x37a

(from the bugzilla thing)

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
> Subject	: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
> Date		: 2010-06-04 13:18 (5 days old)

Jens?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16120
> Subject	: Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
> Submitter	: Alex Zhavnerchik <alex.vizor@gmail.com>
> Date		: 2010-06-04 09:25 (5 days old)
> Handled-By	: Eric Dumazet <eric.dumazet@gmail.com>

This one seems to have a patch in bugzilla.

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16104
> Subject	: Radeon KMS does not start after merge of the new PM-Code
> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> Date		: 2010-06-02 07:47 (7 days old)

This one also has a patch in Bugzilla, I think Airlie is just waiting to 
calm down his queue and already removed the dependency on the temperature 
code. DaveA?

> Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=16161
> Subject       : [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
> Submitter     : Mikael Pettersson <mikpe@it.uu.se>
> Date          : 2010-06-01 19:57 (8 days old)
> Message-ID    : <19461.26166.427857.612983@pilspetsen.it.uu.se>
> References    : http://marc.info/?l=linux-kernel&m=127542227511925&w=2
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16090
> Subject	: sysfs: cannot create duplicate filename
> Submitter	: Tobias <devnull@plzk.org>
> Date		: 2010-06-01 15:59 (8 days old)
> Handled-By	: Jesse Barnes <jbarnes@virtuousgeek.org>

These two look related. Both are related to that "slot" thing in sysfs 
PCI, but only one of them is marked as Jesse's. Jesse?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
> Submitter	: Sean Finney <seanius@debian.org>
> Date		: 2010-05-23 19:52 (17 days old)

Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?

David Härdeman, Mauro Carvalho Chehab added to cc.

				Linus

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  1:53   ` Linus Torvalds
  0 siblings, 0 replies; 129+ messages in thread
From: Linus Torvalds @ 2010-06-09  1:53 UTC (permalink / raw)
  To: Rafael J. Wysocki, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Jens Axboe
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, Andrew Morton,
	Kernel Testers List, Linux PM List, Maciej Rutecki



[ Added lots of cc's to direct specific people to look at the regressions 
  that may or may not be theirs... ]

On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
>
>  * Quite a few of the already reported regressions may be related to the bug
>    fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
>    bug in scrup, vt.c"), so reporters please retest with this commit applied.]

From a quick look, most of them look unrelated to that unfortunate bug. 
It's hard to tell for sure, of course (memory corruption can do pretty 
much anything), but I'm not seeing the 07200720.. pattern at least.

And some of them do seem to be bisected to likely culprits and/or have 
patches that are claimed to have fixed them.

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> Submitter	: David John <davidjon@xenontk.org>
> Date		: 2010-06-02 12:52 (7 days old)
> Message-ID	: <4C065423.3000202@xenontk.org>
> References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2

That has a "reverting the commit fixes it", and a confirmation from Nick 
Bowler.

Eric, Carl: should I just revert that commit? Or do you have a fix?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16145
> Subject	: Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable"
> Submitter	: Tom Gundersen <teg@jklm.no>
> Date		: 2010-06-07 13:11 (2 days old)
> Handled-By	: Venkatesh Pallipadi <venki@google.com>

Hmm. This does seem to be a properly bisected commit, but at the same time 
it looks from the bugzilla like it's just pure luck on that machine that 
the acpi_pad driver happened to mark TSC unstable - so while the commit 
bisected is the real one, it's not the "deeper reason" for the problem.

Venki, any updates?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> Date		: 2010-06-05 06:15 (4 days old)

This seems to have been introduced by

	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
	Author: Ingo Molnar <mingo@elte.hu>
	Date:   Sat Nov 8 17:05:38 2008 +0100

	    sched: optimize sched_clock() a bit
    
	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
	    variant of __cycles_2_ns().
    
	    Most of the time sched_clock() is called with irqs disabled already.
	    The few places that call it with irqs enabled need to be updated.
    
	    Signed-off-by: Ingo Molnar <mingo@elte.hu>

and this seems to be one of those calling cases that need to be updated.

Ingo? The call trace is:

	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
	caller is native_sched_clock+0x3c/0x68
	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
	Call Trace:
	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
	[<ffffffff8101043d>] sched_clock+0x9/0xd
	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
	[<ffffffff81215537>] __make_request+0x338/0x45b
	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
	[<ffffffff81214909>] submit_bio+0xd2/0xef
	[<ffffffff811413cb>] submit_bh+0xf4/0x116
	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
	[<ffffffff81144875>] block_write_full_page+0x15/0x17
	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
	[<ffffffff810e1f91>] __writepage+0x1a/0x39
	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
	[<ffffffff810e3406>] generic_writepages+0x27/0x29
	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
	[<ffffffff811d0cba>] kjournald2+0x147/0x37a

(from the bugzilla thing)

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
> Subject	: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
> Date		: 2010-06-04 13:18 (5 days old)

Jens?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16120
> Subject	: Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
> Submitter	: Alex Zhavnerchik <alex.vizor@gmail.com>
> Date		: 2010-06-04 09:25 (5 days old)
> Handled-By	: Eric Dumazet <eric.dumazet@gmail.com>

This one seems to have a patch in bugzilla.

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16104
> Subject	: Radeon KMS does not start after merge of the new PM-Code
> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> Date		: 2010-06-02 07:47 (7 days old)

This one also has a patch in Bugzilla, I think Airlie is just waiting to 
calm down his queue and already removed the dependency on the temperature 
code. DaveA?

> Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=16161
> Subject       : [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
> Submitter     : Mikael Pettersson <mikpe@it.uu.se>
> Date          : 2010-06-01 19:57 (8 days old)
> Message-ID    : <19461.26166.427857.612983@pilspetsen.it.uu.se>
> References    : http://marc.info/?l=linux-kernel&m=127542227511925&w=2
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16090
> Subject	: sysfs: cannot create duplicate filename
> Submitter	: Tobias <devnull@plzk.org>
> Date		: 2010-06-01 15:59 (8 days old)
> Handled-By	: Jesse Barnes <jbarnes@virtuousgeek.org>

These two look related. Both are related to that "slot" thing in sysfs 
PCI, but only one of them is marked as Jesse's. Jesse?

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
> Submitter	: Sean Finney <seanius@debian.org>
> Date		: 2010-05-23 19:52 (17 days old)

Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?

David Härdeman, Mauro Carvalho Chehab added to cc.

				Linus

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
@ 2010-06-09  2:26     ` Mauro Carvalho Chehab
  -1 siblings, 0 replies; 129+ messages in thread
From: Mauro Carvalho Chehab @ 2010-06-09  2:26 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Rafael J. Wysocki, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Jens Axboe, Dave Airlie, Jesse Barnes, Ingo Molnar,
	David Härdeman, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

Em 08-06-2010 22:53, Linus Torvalds escreveu:

> 
>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
>> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
>> Submitter	: Sean Finney <seanius@debian.org>
>> Date		: 2010-05-23 19:52 (17 days old)
> 
> Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?
> 
> David Härdeman, Mauro Carvalho Chehab added to cc.

This patch probably solves the issue:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=84b14f181a36eea6591779156ef356f8d198bbfd

The patch were already applied upstream. I've already asked the reporter to test it, via BZ.

Cheers,
Mauro

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  2:26     ` Mauro Carvalho Chehab
  0 siblings, 0 replies; 129+ messages in thread
From: Mauro Carvalho Chehab @ 2010-06-09  2:26 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Rafael J. Wysocki, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Jens Axboe, Dave Airlie, Jesse Barnes, Ingo Molnar,
	David Härdeman, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

Em 08-06-2010 22:53, Linus Torvalds escreveu:

> 
>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
>> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
>> Submitter	: Sean Finney <seanius@debian.org>
>> Date		: 2010-05-23 19:52 (17 days old)
> 
> Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?
> 
> David Härdeman, Mauro Carvalho Chehab added to cc.

This patch probably solves the issue:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=84b14f181a36eea6591779156ef356f8d198bbfd

The patch were already applied upstream. I've already asked the reporter to test it, via BZ.

Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
  (?)
  (?)
@ 2010-06-09  2:26   ` Mauro Carvalho Chehab
  -1 siblings, 0 replies; 129+ messages in thread
From: Mauro Carvalho Chehab @ 2010-06-09  2:26 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Venkatesh Pallipadi, DRI, Linux SCSI List, Eric Dumazet,
	Linux ACPI, Jens Axboe, Linux PM List, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Eric Anholt, Carl Worth,
	David Härdeman, Network Development, Ingo Molnar,
	Kernel Testers List, Dave Airlie, Andrew Morton

Em 08-06-2010 22:53, Linus Torvalds escreveu:

> 
>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
>> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
>> Submitter	: Sean Finney <seanius@debian.org>
>> Date		: 2010-05-23 19:52 (17 days old)
> 
> Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?
> 
> David Härdeman, Mauro Carvalho Chehab added to cc.

This patch probably solves the issue:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=84b14f181a36eea6591779156ef356f8d198bbfd

The patch were already applied upstream. I've already asked the reporter to test it, via BZ.

Cheers,
Mauro

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
                     ` (2 preceding siblings ...)
  (?)
@ 2010-06-09  2:26   ` Mauro Carvalho Chehab
  -1 siblings, 0 replies; 129+ messages in thread
From: Mauro Carvalho Chehab @ 2010-06-09  2:26 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Venkatesh Pallipadi, DRI, Linux SCSI List, Eric Dumazet,
	Linux ACPI, Jens Axboe, Linux PM List, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Rafael J. Wysocki,
	Carl Worth, David Härdeman, Network Development,
	Ingo Molnar, Kernel Testers List, Andrew Morton, Maciej Rutecki

Em 08-06-2010 22:53, Linus Torvalds escreveu:

> 
>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
>> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
>> Submitter	: Sean Finney <seanius@debian.org>
>> Date		: 2010-05-23 19:52 (17 days old)
> 
> Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?
> 
> David Härdeman, Mauro Carvalho Chehab added to cc.

This patch probably solves the issue:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=84b14f181a36eea6591779156ef356f8d198bbfd

The patch were already applied upstream. I've already asked the reporter to test it, via BZ.

Cheers,
Mauro

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  2:38     ` Carl Worth
  0 siblings, 0 replies; 129+ messages in thread
From: Carl Worth @ 2010-06-09  2:38 UTC (permalink / raw)
  To: Linus Torvalds, Rafael J. Wysocki, Eric Anholt,
	Venkatesh Pallipadi, Jens Axboe, Dave Airlie, Jesse Barnes,
	Ingo Molnar, David Härdeman, Mauro Carvalho Chehab,
	Eric Dumazet
  Cc: Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
	Kernel Testers List, Network Development, Linux ACPI,
	Linux PM List, Linux SCSI List, Linux Wireless List, DRI

[-- Attachment #1: Type: text/plain, Size: 1079 bytes --]

On Tue, 8 Jun 2010 18:53:55 -0700 (PDT), Linus Torvalds <torvalds@linux-foundation.org> wrote:
> And some of them do seem to be bisected to likely culprits and/or have 
> patches that are claimed to have fixed them.
> 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> > Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> > Submitter	: David John <davidjon@xenontk.org>
> > Date		: 2010-06-02 12:52 (7 days old)
> > Message-ID	: <4C065423.3000202@xenontk.org>
> > References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2
> 
> That has a "reverting the commit fixes it", and a confirmation from Nick 
> Bowler.
> 
> Eric, Carl: should I just revert that commit? Or do you have a fix?

I'm not aware of any real fix here. That commit isn't supposed to change
much, but it clearly unmasks some broken driver code.

So reverting it for now to hide the broken code from poor users does
seem a good plan to me, (unless Eric has any updates or alternate
suggestions).

-Carl

-- 
carl.d.worth@intel.com

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  2:38     ` Carl Worth
  0 siblings, 0 replies; 129+ messages in thread
From: Carl Worth @ 2010-06-09  2:38 UTC (permalink / raw)
  To: Linus Torvalds, Rafael J. Wysocki, Eric Anholt,
	Venkatesh Pallipadi, Jens Axboe
  Cc: Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
	Kernel Testers List, Network Development, Linux ACPI,
	Linux PM List, Linux SCSI List, Linux Wireless List, DRI

[-- Attachment #1: Type: text/plain, Size: 1165 bytes --]

On Tue, 8 Jun 2010 18:53:55 -0700 (PDT), Linus Torvalds <torvalds@linux-foundation.org> wrote:
> And some of them do seem to be bisected to likely culprits and/or have 
> patches that are claimed to have fixed them.
> 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> > Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> > Submitter	: David John <davidjon-XRr60H37pjdAfugRpC6u6w@public.gmane.org>
> > Date		: 2010-06-02 12:52 (7 days old)
> > Message-ID	: <4C065423.3000202-XRr60H37pjdAfugRpC6u6w@public.gmane.org>
> > References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2
> 
> That has a "reverting the commit fixes it", and a confirmation from Nick 
> Bowler.
> 
> Eric, Carl: should I just revert that commit? Or do you have a fix?

I'm not aware of any real fix here. That commit isn't supposed to change
much, but it clearly unmasks some broken driver code.

So reverting it for now to hide the broken code from poor users does
seem a good plan to me, (unless Eric has any updates or alternate
suggestions).

-Carl

-- 
carl.d.worth-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  2:38     ` Carl Worth
  0 siblings, 0 replies; 129+ messages in thread
From: Carl Worth @ 2010-06-09  2:38 UTC (permalink / raw)
  To: Linus Torvalds, Rafael J. Wysocki, Eric Anholt,
	Venkatesh Pallipadi, Jens Axboe
  Cc: Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
	Kernel Testers List, Network Development, Linux ACPI,
	Linux PM List, Linux SCSI List, Linux Wireless List, DRI

[-- Attachment #1: Type: text/plain, Size: 1165 bytes --]

On Tue, 8 Jun 2010 18:53:55 -0700 (PDT), Linus Torvalds <torvalds@linux-foundation.org> wrote:
> And some of them do seem to be bisected to likely culprits and/or have 
> patches that are claimed to have fixed them.
> 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> > Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> > Submitter	: David John <davidjon-XRr60H37pjdAfugRpC6u6w@public.gmane.org>
> > Date		: 2010-06-02 12:52 (7 days old)
> > Message-ID	: <4C065423.3000202-XRr60H37pjdAfugRpC6u6w@public.gmane.org>
> > References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2
> 
> That has a "reverting the commit fixes it", and a confirmation from Nick 
> Bowler.
> 
> Eric, Carl: should I just revert that commit? Or do you have a fix?

I'm not aware of any real fix here. That commit isn't supposed to change
much, but it clearly unmasks some broken driver code.

So reverting it for now to hide the broken code from poor users does
seem a good plan to me, (unless Eric has any updates or alternate
suggestions).

-Carl

-- 
carl.d.worth-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
                     ` (4 preceding siblings ...)
  (?)
@ 2010-06-09  2:38   ` Carl Worth
  -1 siblings, 0 replies; 129+ messages in thread
From: Carl Worth @ 2010-06-09  2:38 UTC (permalink / raw)
  To: Linus Torvalds, Rafael J. Wysocki, Eric Anholt,
	Venkatesh Pallipadi, Jens
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, Andrew Morton,
	Kernel Testers List, Linux PM List, Maciej Rutecki


[-- Attachment #1.1: Type: text/plain, Size: 1079 bytes --]

On Tue, 8 Jun 2010 18:53:55 -0700 (PDT), Linus Torvalds <torvalds@linux-foundation.org> wrote:
> And some of them do seem to be bisected to likely culprits and/or have 
> patches that are claimed to have fixed them.
> 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> > Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> > Submitter	: David John <davidjon@xenontk.org>
> > Date		: 2010-06-02 12:52 (7 days old)
> > Message-ID	: <4C065423.3000202@xenontk.org>
> > References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2
> 
> That has a "reverting the commit fixes it", and a confirmation from Nick 
> Bowler.
> 
> Eric, Carl: should I just revert that commit? Or do you have a fix?

I'm not aware of any real fix here. That commit isn't supposed to change
much, but it clearly unmasks some broken driver code.

So reverting it for now to hide the broken code from poor users does
seem a good plan to me, (unless Eric has any updates or alternate
suggestions).

-Carl

-- 
carl.d.worth@intel.com

[-- Attachment #1.2: Type: application/pgp-signature, Size: 189 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]



^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
                     ` (6 preceding siblings ...)
  (?)
@ 2010-06-09  2:38   ` Carl Worth
  -1 siblings, 0 replies; 129+ messages in thread
From: Carl Worth @ 2010-06-09  2:38 UTC (permalink / raw)
  To: Linus Torvalds, Rafael J. Wysocki, Eric Anholt,
	Venkatesh Pallipadi, Jens Axboe
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, Andrew Morton,
	Kernel Testers List, Linux PM List, Maciej Rutecki


[-- Attachment #1.1: Type: text/plain, Size: 1079 bytes --]

On Tue, 8 Jun 2010 18:53:55 -0700 (PDT), Linus Torvalds <torvalds@linux-foundation.org> wrote:
> And some of them do seem to be bisected to likely culprits and/or have 
> patches that are claimed to have fixed them.
> 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> > Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> > Submitter	: David John <davidjon@xenontk.org>
> > Date		: 2010-06-02 12:52 (7 days old)
> > Message-ID	: <4C065423.3000202@xenontk.org>
> > References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2
> 
> That has a "reverting the commit fixes it", and a confirmation from Nick 
> Bowler.
> 
> Eric, Carl: should I just revert that commit? Or do you have a fix?

I'm not aware of any real fix here. That commit isn't supposed to change
much, but it clearly unmasks some broken driver code.

So reverting it for now to hide the broken code from poor users does
seem a good plan to me, (unless Eric has any updates or alternate
suggestions).

-Carl

-- 
carl.d.worth@intel.com

[-- Attachment #1.2: Type: application/pgp-signature, Size: 189 bytes --]

[-- Attachment #2: Type: text/plain, Size: 287 bytes --]

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo

[-- Attachment #3: Type: text/plain, Size: 161 bytes --]

--
_______________________________________________
Dri-devel mailing list
Dri-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16122] 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
  2010-06-08 22:10   ` Rafael J. Wysocki
@ 2010-06-09  2:52     ` Larry Finger
  -1 siblings, 0 replies; 129+ messages in thread
From: Larry Finger @ 2010-06-09  2:52 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Linux Kernel Mailing List, Kernel Testers List, Maciej Rutecki

On 06/08/2010 05:10 PM, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a summary report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.34.  Please verify if it still should be listed and let the tracking team
> know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
> Subject		: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
> Date		: 2010-06-04 13:18 (5 days old)

Still present in 2.6.35-rc2.

Larry

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16122] 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
@ 2010-06-09  2:52     ` Larry Finger
  0 siblings, 0 replies; 129+ messages in thread
From: Larry Finger @ 2010-06-09  2:52 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Linux Kernel Mailing List, Kernel Testers List, Maciej Rutecki

On 06/08/2010 05:10 PM, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a summary report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.34.  Please verify if it still should be listed and let the tracking team
> know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
> Subject		: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> Date		: 2010-06-04 13:18 (5 days old)

Still present in 2.6.35-rc2.

Larry

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
                     ` (9 preceding siblings ...)
  (?)
@ 2010-06-09  5:34   ` Ingo Molnar
  -1 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-09  5:34 UTC (permalink / raw)
  To: Linus Torvalds, Jens Axboe, Peter Zijlstra
  Cc: Rafael J. Wysocki, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Jens Axboe, Dave Airlie, Jesse Barnes, David H?rdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI


* Linus Torvalds <torvalds@linux-foundation.org> wrote:

> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> > Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> > Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> > Date		: 2010-06-05 06:15 (4 days old)
> 
> This seems to have been introduced by
> 
> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> 	Author: Ingo Molnar <mingo@elte.hu>
> 	Date:   Sat Nov 8 17:05:38 2008 +0100
> 
> 	    sched: optimize sched_clock() a bit
>     
> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> 	    variant of __cycles_2_ns().
>     
> 	    Most of the time sched_clock() is called with irqs disabled already.
> 	    The few places that call it with irqs enabled need to be updated.
>     
> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> 
> and this seems to be one of those calling cases that need to be updated.

That's a commit from 2008.

> Ingo? The call trace is:
> 
> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> 	caller is native_sched_clock+0x3c/0x68
> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> 	Call Trace:
> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> 	[<ffffffff81215537>] __make_request+0x338/0x45b
> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> 
> (from the bugzilla thing)

The warning was introduced by this fresh commit (and a followup commit) merged 
in the .35 merge window:

 | commit 9195291e5f05e01d67f9a09c756b8aca8f009089
 | Author: Divyesh Shah <dpshah@google.com>
 | Date:   Thu Apr 1 15:01:41 2010 -0700
 | 
 |     blkio: Increment the blkio cgroup stats for real now

IIRC Jens posted a fix for the regression. Jens, what's the status of that?

As the code there started using a raw sched_clock() call for block statistics 
purposes, which was a poorly thought out (and buggy) approach:

 - it takes timestamps on different cpus and then compares then, but doesnt 
   consider that sched_clock() is not comparable between CPUs without extra 
   care

 - it doesnt consider the possibility for the sched_clock() result going
   backwards on certain platforms (such as x86)

 - it doesnt consider preemptability

(There's work ongoing to add a clock variant that can be used for such 
purposes, but that's .36 fodder.)

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
                     ` (7 preceding siblings ...)
  (?)
@ 2010-06-09  5:34   ` Ingo Molnar
  -1 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-09  5:34 UTC (permalink / raw)
  To: Linus Torvalds, Jens Axboe, Peter Zijlstra
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Jens Axboe, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Eric Anholt, Carl Worth,
	David H?rdeman, Network Development, Andrew Morton,
	Kernel Testers List, Dave Airlie, Linux PM List, Linux SCSI List,
	Maci


* Linus Torvalds <torvalds@linux-foundation.org> wrote:

> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> > Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> > Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> > Date		: 2010-06-05 06:15 (4 days old)
> 
> This seems to have been introduced by
> 
> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> 	Author: Ingo Molnar <mingo@elte.hu>
> 	Date:   Sat Nov 8 17:05:38 2008 +0100
> 
> 	    sched: optimize sched_clock() a bit
>     
> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> 	    variant of __cycles_2_ns().
>     
> 	    Most of the time sched_clock() is called with irqs disabled already.
> 	    The few places that call it with irqs enabled need to be updated.
>     
> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> 
> and this seems to be one of those calling cases that need to be updated.

That's a commit from 2008.

> Ingo? The call trace is:
> 
> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> 	caller is native_sched_clock+0x3c/0x68
> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> 	Call Trace:
> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> 	[<ffffffff81215537>] __make_request+0x338/0x45b
> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> 
> (from the bugzilla thing)

The warning was introduced by this fresh commit (and a followup commit) merged 
in the .35 merge window:

 | commit 9195291e5f05e01d67f9a09c756b8aca8f009089
 | Author: Divyesh Shah <dpshah@google.com>
 | Date:   Thu Apr 1 15:01:41 2010 -0700
 | 
 |     blkio: Increment the blkio cgroup stats for real now

IIRC Jens posted a fix for the regression. Jens, what's the status of that?

As the code there started using a raw sched_clock() call for block statistics 
purposes, which was a poorly thought out (and buggy) approach:

 - it takes timestamps on different cpus and then compares then, but doesnt 
   consider that sched_clock() is not comparable between CPUs without extra 
   care

 - it doesnt consider the possibility for the sched_clock() result going
   backwards on certain platforms (such as x86)

 - it doesnt consider preemptability

(There's work ongoing to add a clock variant that can be used for such 
purposes, but that's .36 fodder.)

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
                     ` (8 preceding siblings ...)
  (?)
@ 2010-06-09  5:34   ` Ingo Molnar
  -1 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-09  5:34 UTC (permalink / raw)
  To: Linus Torvalds, Jens Axboe, Peter Zijlstra
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Jens Axboe, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Linux SCSI List,
	Rafael J. Wysocki, Carl Worth, David H?rdeman,
	Network Development, Andrew Morton, Kernel Testers List,
	Linux PM List, Maciej Rutecki


* Linus Torvalds <torvalds@linux-foundation.org> wrote:

> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> > Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> > Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> > Date		: 2010-06-05 06:15 (4 days old)
> 
> This seems to have been introduced by
> 
> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> 	Author: Ingo Molnar <mingo@elte.hu>
> 	Date:   Sat Nov 8 17:05:38 2008 +0100
> 
> 	    sched: optimize sched_clock() a bit
>     
> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> 	    variant of __cycles_2_ns().
>     
> 	    Most of the time sched_clock() is called with irqs disabled already.
> 	    The few places that call it with irqs enabled need to be updated.
>     
> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> 
> and this seems to be one of those calling cases that need to be updated.

That's a commit from 2008.

> Ingo? The call trace is:
> 
> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> 	caller is native_sched_clock+0x3c/0x68
> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> 	Call Trace:
> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> 	[<ffffffff81215537>] __make_request+0x338/0x45b
> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> 
> (from the bugzilla thing)

The warning was introduced by this fresh commit (and a followup commit) merged 
in the .35 merge window:

 | commit 9195291e5f05e01d67f9a09c756b8aca8f009089
 | Author: Divyesh Shah <dpshah@google.com>
 | Date:   Thu Apr 1 15:01:41 2010 -0700
 | 
 |     blkio: Increment the blkio cgroup stats for real now

IIRC Jens posted a fix for the regression. Jens, what's the status of that?

As the code there started using a raw sched_clock() call for block statistics 
purposes, which was a poorly thought out (and buggy) approach:

 - it takes timestamps on different cpus and then compares then, but doesnt 
   consider that sched_clock() is not comparable between CPUs without extra 
   care

 - it doesnt consider the possibility for the sched_clock() result going
   backwards on certain platforms (such as x86)

 - it doesnt consider preemptability

(There's work ongoing to add a clock variant that can be used for such 
purposes, but that's .36 fodder.)

Thanks,

	Ingo

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  6:36     ` Eric Dumazet
  0 siblings, 0 replies; 129+ messages in thread
From: Eric Dumazet @ 2010-06-09  6:36 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Rafael J. Wysocki, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Jens Axboe, Dave Airlie, Jesse Barnes, Ingo Molnar,
	David Härdeman, Mauro Carvalho Chehab,
	Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
	Kernel Testers List, Network Development, Linux ACPI,
	Linux PM List, Linux SCSI List, Linux Wireless List, DRI

Le mardi 08 juin 2010 à 18:53 -0700, Linus Torvalds a écrit :

> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16120
> > Subject	: Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
> > Submitter	: Alex Zhavnerchik <alex.vizor@gmail.com>
> > Date		: 2010-06-04 09:25 (5 days old)
> > Handled-By	: Eric Dumazet <eric.dumazet@gmail.com>
> 
> This one seems to have a patch in bugzilla.

Yep, commit 035320d54758e21227987e3aae0d46e7a04f4ddc in David net-2.6
tree, i'll be included in its next pull request.

http://git.kernel.org/?p=linux/kernel/git/davem/net-2.6.git;a=commit;h=035320d54758e21227987e3aae0d46e7a04f4ddc

Thanks



^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  6:36     ` Eric Dumazet
  0 siblings, 0 replies; 129+ messages in thread
From: Eric Dumazet @ 2010-06-09  6:36 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Rafael J. Wysocki, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Jens Axboe, Dave Airlie, Jesse Barnes, Ingo Molnar,
	David Härdeman, Mauro Carvalho Chehab,
	Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
	Kernel Testers List, Network Development, Linux ACPI,
	Linux PM List, Linux SCSI List, Linux Wireless List, DRI

Le mardi 08 juin 2010 à 18:53 -0700, Linus Torvalds a écrit :

> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16120
> > Subject	: Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
> > Submitter	: Alex Zhavnerchik <alex.vizor-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > Date		: 2010-06-04 09:25 (5 days old)
> > Handled-By	: Eric Dumazet <eric.dumazet-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> This one seems to have a patch in bugzilla.

Yep, commit 035320d54758e21227987e3aae0d46e7a04f4ddc in David net-2.6
tree, i'll be included in its next pull request.

http://git.kernel.org/?p=linux/kernel/git/davem/net-2.6.git;a=commit;h=035320d54758e21227987e3aae0d46e7a04f4ddc

Thanks

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
                     ` (10 preceding siblings ...)
  (?)
@ 2010-06-09  6:36   ` Eric Dumazet
  -1 siblings, 0 replies; 129+ messages in thread
From: Eric Dumazet @ 2010-06-09  6:36 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Linux SCSI List,
	Linux ACPI, Jens Axboe, Linux PM List, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Eric Anholt, Carl Worth,
	David Härdeman, Network Development, Ingo Molnar,
	Kernel Testers List, Dave Airlie, Andrew Morton

Le mardi 08 juin 2010 à 18:53 -0700, Linus Torvalds a écrit :

> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16120
> > Subject	: Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
> > Submitter	: Alex Zhavnerchik <alex.vizor@gmail.com>
> > Date		: 2010-06-04 09:25 (5 days old)
> > Handled-By	: Eric Dumazet <eric.dumazet@gmail.com>
> 
> This one seems to have a patch in bugzilla.

Yep, commit 035320d54758e21227987e3aae0d46e7a04f4ddc in David net-2.6
tree, i'll be included in its next pull request.

http://git.kernel.org/?p=linux/kernel/git/davem/net-2.6.git;a=commit;h=035320d54758e21227987e3aae0d46e7a04f4ddc

Thanks


_______________________________________________
linux-pm mailing list
linux-pm@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
                     ` (14 preceding siblings ...)
  (?)
@ 2010-06-09  7:53   ` Jens Axboe
  2010-06-09  8:55     ` Rafael J. Wysocki
                       ` (7 more replies)
  -1 siblings, 8 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-09  7:53 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Rafael J. Wysocki, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Dave Airlie, Jesse Barnes, Ingo Molnar, David Härdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

On 2010-06-09 03:53, Linus Torvalds wrote:
>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
>> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
>> Date		: 2010-06-05 06:15 (4 days old)
> 
> This seems to have been introduced by
> 
> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> 	Author: Ingo Molnar <mingo@elte.hu>
> 	Date:   Sat Nov 8 17:05:38 2008 +0100
> 
> 	    sched: optimize sched_clock() a bit
>     
> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> 	    variant of __cycles_2_ns().
>     
> 	    Most of the time sched_clock() is called with irqs disabled already.
> 	    The few places that call it with irqs enabled need to be updated.
>     
> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> 
> and this seems to be one of those calling cases that need to be updated.
> 
> Ingo? The call trace is:
> 
> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> 	caller is native_sched_clock+0x3c/0x68
> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> 	Call Trace:
> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> 	[<ffffffff81215537>] __make_request+0x338/0x45b
> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> 
> (from the bugzilla thing)

This should be fixed by commit 28f4197e which was merged on friday.

>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
>> Subject	: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
>> Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
>> Date		: 2010-06-04 13:18 (5 days old)
> 
> Jens?

Looking into this one.

-- 
Jens Axboe


^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
                     ` (13 preceding siblings ...)
  (?)
@ 2010-06-09  7:53   ` Jens Axboe
  -1 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-09  7:53 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Eric Anholt, Carl Worth,
	David Härdeman, Linux PM List, Ingo Molnar,
	Kernel Testers List, Dave Airlie, Andrew Morton, Linux SCSI List

On 2010-06-09 03:53, Linus Torvalds wrote:
>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
>> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
>> Date		: 2010-06-05 06:15 (4 days old)
> 
> This seems to have been introduced by
> 
> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> 	Author: Ingo Molnar <mingo@elte.hu>
> 	Date:   Sat Nov 8 17:05:38 2008 +0100
> 
> 	    sched: optimize sched_clock() a bit
>     
> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> 	    variant of __cycles_2_ns().
>     
> 	    Most of the time sched_clock() is called with irqs disabled already.
> 	    The few places that call it with irqs enabled need to be updated.
>     
> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> 
> and this seems to be one of those calling cases that need to be updated.
> 
> Ingo? The call trace is:
> 
> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> 	caller is native_sched_clock+0x3c/0x68
> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> 	Call Trace:
> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> 	[<ffffffff81215537>] __make_request+0x338/0x45b
> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> 
> (from the bugzilla thing)

This should be fixed by commit 28f4197e which was merged on friday.

>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
>> Subject	: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
>> Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
>> Date		: 2010-06-04 13:18 (5 days old)
> 
> Jens?

Looking into this one.

-- 
Jens Axboe

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
                     ` (12 preceding siblings ...)
  (?)
@ 2010-06-09  7:53   ` Jens Axboe
  -1 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-09  7:53 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Linux SCSI List,
	Rafael J. Wysocki, Carl Worth, David Härdeman,
	Linux PM List, Ingo Molnar, Kernel Testers List, Andrew Morton,
	Maciej Rutecki

On 2010-06-09 03:53, Linus Torvalds wrote:
>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
>> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
>> Date		: 2010-06-05 06:15 (4 days old)
> 
> This seems to have been introduced by
> 
> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> 	Author: Ingo Molnar <mingo@elte.hu>
> 	Date:   Sat Nov 8 17:05:38 2008 +0100
> 
> 	    sched: optimize sched_clock() a bit
>     
> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> 	    variant of __cycles_2_ns().
>     
> 	    Most of the time sched_clock() is called with irqs disabled already.
> 	    The few places that call it with irqs enabled need to be updated.
>     
> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> 
> and this seems to be one of those calling cases that need to be updated.
> 
> Ingo? The call trace is:
> 
> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> 	caller is native_sched_clock+0x3c/0x68
> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> 	Call Trace:
> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> 	[<ffffffff81215537>] __make_request+0x338/0x45b
> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> 
> (from the bugzilla thing)

This should be fixed by commit 28f4197e which was merged on friday.

>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
>> Subject	: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
>> Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
>> Date		: 2010-06-04 13:18 (5 days old)
> 
> Jens?

Looking into this one.

-- 
Jens Axboe


------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16122] 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
@ 2010-06-09  8:51       ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  8:51 UTC (permalink / raw)
  To: Larry Finger
  Cc: Linux Kernel Mailing List, Kernel Testers List, Maciej Rutecki

On Wednesday 09 June 2010, Larry Finger wrote:
> On 06/08/2010 05:10 PM, Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a summary report
> > of recent regressions.
> > 
> > The following bug entry is on the current list of known regressions
> > from 2.6.34.  Please verify if it still should be listed and let the tracking team
> > know (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
> > Subject		: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> > Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
> > Date		: 2010-06-04 13:18 (5 days old)
> 
> Still present in 2.6.35-rc2.

Thanks for the update.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16122] 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
@ 2010-06-09  8:51       ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  8:51 UTC (permalink / raw)
  To: Larry Finger
  Cc: Linux Kernel Mailing List, Kernel Testers List, Maciej Rutecki

On Wednesday 09 June 2010, Larry Finger wrote:
> On 06/08/2010 05:10 PM, Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a summary report
> > of recent regressions.
> > 
> > The following bug entry is on the current list of known regressions
> > from 2.6.34.  Please verify if it still should be listed and let the tracking team
> > know (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16122
> > Subject		: 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> > Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> > Date		: 2010-06-04 13:18 (5 days old)
> 
> Still present in 2.6.35-rc2.

Thanks for the update.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  7:53   ` Jens Axboe
  2010-06-09  8:55     ` Rafael J. Wysocki
@ 2010-06-09  8:55     ` Rafael J. Wysocki
  2010-06-09  8:55     ` Rafael J. Wysocki
                       ` (5 subsequent siblings)
  7 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  8:55 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Linus Torvalds, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Dave Airlie, Jesse Barnes, Ingo Molnar, David Härdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

On Wednesday 09 June 2010, Jens Axboe wrote:
> On 2010-06-09 03:53, Linus Torvalds wrote:
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> >> Date		: 2010-06-05 06:15 (4 days old)
> > 
> > This seems to have been introduced by
> > 
> > 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> > 	Author: Ingo Molnar <mingo@elte.hu>
> > 	Date:   Sat Nov 8 17:05:38 2008 +0100
> > 
> > 	    sched: optimize sched_clock() a bit
> >     
> > 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> > 	    variant of __cycles_2_ns().
> >     
> > 	    Most of the time sched_clock() is called with irqs disabled already.
> > 	    The few places that call it with irqs enabled need to be updated.
> >     
> > 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> > 
> > and this seems to be one of those calling cases that need to be updated.
> > 
> > Ingo? The call trace is:
> > 
> > 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> > 	caller is native_sched_clock+0x3c/0x68
> > 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> > 	Call Trace:
> > 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> > 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> > 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> > 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> > 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> > 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> > 	[<ffffffff81215537>] __make_request+0x338/0x45b
> > 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> > 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> > 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> > 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> > 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> > 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> > 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> > 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> > 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> > 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> > 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> > 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> > 
> > (from the bugzilla thing)
> 
> This should be fixed by commit 28f4197e which was merged on friday.

Thanks, closed.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  7:53   ` Jens Axboe
@ 2010-06-09  8:55     ` Rafael J. Wysocki
  2010-06-09  8:55     ` Rafael J. Wysocki
                       ` (6 subsequent siblings)
  7 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  8:55 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux PM List, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, David, Linux SCSI List,
	Eric Anholt, Carl Worth, Härdeman, Network Development,
	Ingo Molnar, Kernel Testers List

On Wednesday 09 June 2010, Jens Axboe wrote:
> On 2010-06-09 03:53, Linus Torvalds wrote:
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> >> Date		: 2010-06-05 06:15 (4 days old)
> > 
> > This seems to have been introduced by
> > 
> > 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> > 	Author: Ingo Molnar <mingo@elte.hu>
> > 	Date:   Sat Nov 8 17:05:38 2008 +0100
> > 
> > 	    sched: optimize sched_clock() a bit
> >     
> > 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> > 	    variant of __cycles_2_ns().
> >     
> > 	    Most of the time sched_clock() is called with irqs disabled already.
> > 	    The few places that call it with irqs enabled need to be updated.
> >     
> > 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> > 
> > and this seems to be one of those calling cases that need to be updated.
> > 
> > Ingo? The call trace is:
> > 
> > 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> > 	caller is native_sched_clock+0x3c/0x68
> > 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> > 	Call Trace:
> > 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> > 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> > 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> > 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> > 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> > 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> > 	[<ffffffff81215537>] __make_request+0x338/0x45b
> > 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> > 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> > 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> > 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> > 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> > 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> > 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> > 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> > 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> > 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> > 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> > 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> > 
> > (from the bugzilla thing)
> 
> This should be fixed by commit 28f4197e which was merged on friday.

Thanks, closed.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  7:53   ` Jens Axboe
  2010-06-09  8:55     ` Rafael J. Wysocki
  2010-06-09  8:55     ` Rafael J. Wysocki
@ 2010-06-09  8:55     ` Rafael J. Wysocki
  2010-06-09  9:32     ` Ingo Molnar
                       ` (4 subsequent siblings)
  7 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  8:55 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux PM List, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Linux SCSI List,
	Carl Worth, Härdeman, Network Development, Ingo Molnar,
	Kernel Testers List, Andrew Morton, Maciej Rutecki

On Wednesday 09 June 2010, Jens Axboe wrote:
> On 2010-06-09 03:53, Linus Torvalds wrote:
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> >> Date		: 2010-06-05 06:15 (4 days old)
> > 
> > This seems to have been introduced by
> > 
> > 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> > 	Author: Ingo Molnar <mingo@elte.hu>
> > 	Date:   Sat Nov 8 17:05:38 2008 +0100
> > 
> > 	    sched: optimize sched_clock() a bit
> >     
> > 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> > 	    variant of __cycles_2_ns().
> >     
> > 	    Most of the time sched_clock() is called with irqs disabled already.
> > 	    The few places that call it with irqs enabled need to be updated.
> >     
> > 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> > 
> > and this seems to be one of those calling cases that need to be updated.
> > 
> > Ingo? The call trace is:
> > 
> > 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> > 	caller is native_sched_clock+0x3c/0x68
> > 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> > 	Call Trace:
> > 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> > 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> > 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> > 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> > 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> > 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> > 	[<ffffffff81215537>] __make_request+0x338/0x45b
> > 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> > 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> > 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> > 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> > 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> > 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> > 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> > 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> > 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> > 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> > 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> > 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> > 
> > (from the bugzilla thing)
> 
> This should be fixed by commit 28f4197e which was merged on friday.

Thanks, closed.

Rafael

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  9:00       ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  9:00 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linus Torvalds, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Jens Axboe, Dave Airlie, Jesse Barnes, Ingo Molnar,
	David Härdeman, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

On Wednesday 09 June 2010, Mauro Carvalho Chehab wrote:
> Em 08-06-2010 22:53, Linus Torvalds escreveu:
> 
> > 
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
> >> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
> >> Submitter	: Sean Finney <seanius@debian.org>
> >> Date		: 2010-05-23 19:52 (17 days old)
> > 
> > Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?
> > 
> > David Härdeman, Mauro Carvalho Chehab added to cc.
> 
> This patch probably solves the issue:
> 
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=84b14f181a36eea6591779156ef356f8d198bbfd
> 
> The patch were already applied upstream. I've already asked the reporter to test it, via BZ.

Confirmed fixed, so closing.

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  9:00       ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  9:00 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linus Torvalds, Carl Worth, Eric Anholt, Venkatesh Pallipadi,
	Jens Axboe, Dave Airlie, Jesse Barnes, Ingo Molnar,
	David Härdeman, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

On Wednesday 09 June 2010, Mauro Carvalho Chehab wrote:
> Em 08-06-2010 22:53, Linus Torvalds escreveu:
> 
> > 
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
> >> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
> >> Submitter	: Sean Finney <seanius-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
> >> Date		: 2010-05-23 19:52 (17 days old)
> > 
> > Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?
> > 
> > David Härdeman, Mauro Carvalho Chehab added to cc.
> 
> This patch probably solves the issue:
> 
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=84b14f181a36eea6591779156ef356f8d198bbfd
> 
> The patch were already applied upstream. I've already asked the reporter to test it, via BZ.

Confirmed fixed, so closing.

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  2:26     ` Mauro Carvalho Chehab
                       ` (2 preceding siblings ...)
  (?)
@ 2010-06-09  9:00     ` Rafael J. Wysocki
  -1 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  9:00 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Venkatesh Pallipadi, DRI, Linux SCSI List, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux PM List, Network Development,
	Linux Kernel Mailing List, Jesse Barnes, David, Eric Anholt,
	Carl Worth, Härdeman, Jens Axboe, Linux Wireless List,
	Ingo Molnar, Kernel Testers List

On Wednesday 09 June 2010, Mauro Carvalho Chehab wrote:
> Em 08-06-2010 22:53, Linus Torvalds escreveu:
> 
> > 
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
> >> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
> >> Submitter	: Sean Finney <seanius@debian.org>
> >> Date		: 2010-05-23 19:52 (17 days old)
> > 
> > Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?
> > 
> > David Härdeman, Mauro Carvalho Chehab added to cc.
> 
> This patch probably solves the issue:
> 
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=84b14f181a36eea6591779156ef356f8d198bbfd
> 
> The patch were already applied upstream. I've already asked the reporter to test it, via BZ.

Confirmed fixed, so closing.

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  2:26     ` Mauro Carvalho Chehab
  (?)
@ 2010-06-09  9:00     ` Rafael J. Wysocki
  -1 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  9:00 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Venkatesh Pallipadi, DRI, Linux SCSI List, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux PM List, Network Development,
	Linux Kernel Mailing List, Jesse Barnes, Carl Worth,
	Härdeman, Jens Axboe, Linux Wireless List, Ingo Molnar,
	Kernel Testers List, Andrew Morton, Maciej Rutecki

On Wednesday 09 June 2010, Mauro Carvalho Chehab wrote:
> Em 08-06-2010 22:53, Linus Torvalds escreveu:
> 
> > 
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16037
> >> Subject	: NULL Pointer dereference in __ir_input_register/budget_ci_attach
> >> Submitter	: Sean Finney <seanius@debian.org>
> >> Date		: 2010-05-23 19:52 (17 days old)
> > 
> > Perhaps related to commit 13c24497086418010bf4f76378bcae241d7f59cd?
> > 
> > David Härdeman, Mauro Carvalho Chehab added to cc.
> 
> This patch probably solves the issue:
> 
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=84b14f181a36eea6591779156ef356f8d198bbfd
> 
> The patch were already applied upstream. I've already asked the reporter to test it, via BZ.

Confirmed fixed, so closing.

Thanks,
Rafael

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
@ 2010-06-09  9:02   ` Sedat Dilek
  2010-06-08 22:10   ` Rafael J. Wysocki
                     ` (16 subsequent siblings)
  17 siblings, 0 replies; 129+ messages in thread
From: Sedat Dilek @ 2010-06-09  9:02 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
	Linus Torvalds, Kernel Testers List, Network Development,
	Linux ACPI, Linux PM List, Linux SCSI List, Linux Wireless List,
	DRI, dmonakhov

The patch from [1] is still missing.

   "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
Dmitry Monakhoc

Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>

I have already reported this issue on LKML [2] and cpufreq ML [3].

- Sedat -

[1] http://www.spinics.net/lists/cpufreq/msg01631.html
[2] http://lkml.org/lkml/2010/5/31/77
[3] http://www.spinics.net/lists/cpufreq/msg01637.html

On Wed, Jun 9, 2010 at 12:06 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> [NOTES:
>  * This by no means is a complete list, but we only put e-mail reports that
>   are at least 1 week old into the Bugzilla.
>  * Quite a few of the already reported regressions may be related to the bug
>   fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
>   bug in scrup, vt.c"), so reporters please retest with this commit applied.]
>
> This message contains a list of some regressions from 2.6.34,
> for which there are no fixes in the mainline known to the tracking team.
> If any of them have been fixed already, please let us know.
>
> If you know of any other unresolved regressions from 2.6.34, please let us
> know either and we'll add them to the list.  Also, please let us know
> if any of the entries below are invalid.
>
> Each entry from the list will be sent additionally in an automatic reply
> to this message with CCs to the people involved in reporting and handling
> the issue.
>
>
> Listed regressions statistics:
>
>  Date          Total  Pending  Unresolved
>  ----------------------------------------
>  2010-06-09       15       13          10
>
>
> Unresolved regressions
> ----------------------
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16163
> Subject         : [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> Submitter       : David John <davidjon@xenontk.org>
> Date            : 2010-06-02 12:52 (7 days old)
> Message-ID      : <4C065423.3000202@xenontk.org>
> References      : http://marc.info/?l=linux-kernel&m=127548313828613&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16161
> Subject         : [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
> Submitter       : Mikael Pettersson <mikpe@it.uu.se>
> Date            : 2010-06-01 19:57 (8 days old)
> Message-ID      : <19461.26166.427857.612983@pilspetsen.it.uu.se>
> References      : http://marc.info/?l=linux-kernel&m=127542227511925&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16160
> Subject         : 2.6.35 Radeon KMS power management regression?
> Submitter       : Nigel Cunningham <ncunningham@crca.org.au>
> Date            : 2010-06-01 6:23 (8 days old)
> Message-ID      : <4C04A767.8000209@crca.org.au>
> References      : http://marc.info/?l=linux-kernel&m=127537343722290&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16145
> Subject         : Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable"
> Submitter       : Tom Gundersen <teg@jklm.no>
> Date            : 2010-06-07 13:11 (2 days old)
> Handled-By      : Venkatesh Pallipadi <venki@google.com>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16129
> Subject         : BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> Submitter       : Jan Kreuzer <kontrollator@gmx.de>
> Date            : 2010-06-05 06:15 (4 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16122
> Subject         : 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> Submitter       : Larry Finger <Larry.Finger@lwfinger.net>
> Date            : 2010-06-04 13:18 (5 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16120
> Subject         : Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
> Submitter       : Alex Zhavnerchik <alex.vizor@gmail.com>
> Date            : 2010-06-04 09:25 (5 days old)
> Handled-By      : Eric Dumazet <eric.dumazet@gmail.com>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16104
> Subject         : Radeon KMS does not start after merge of the new PM-Code
> Submitter       : Jan Kreuzer <kontrollator@gmx.de>
> Date            : 2010-06-02 07:47 (7 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16090
> Subject         : sysfs: cannot create duplicate filename
> Submitter       : Tobias <devnull@plzk.org>
> Date            : 2010-06-01 15:59 (8 days old)
> Handled-By      : Jesse Barnes <jbarnes@virtuousgeek.org>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16037
> Subject         : NULL Pointer dereference in __ir_input_register/budget_ci_attach
> Submitter       : Sean Finney <seanius@debian.org>
> Date            : 2010-05-23 19:52 (17 days old)
>
>
> Regressions with patches
> ------------------------
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16131
> Subject         : kernel BUG at fs/btrfs/extent-tree.c:4363 (btrfs_free_tree_block)
> Submitter       : Chow Loong Jin <hyperair@ubuntu.com>
> Date            : 2010-06-05 18:53 (4 days old)
> Handled-By      : Yan Zheng <zheng.yan@oracle.com>
> Patch           : https://patchwork.kernel.org/patch/103235/
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16127
> Subject         : Boot freeze on HP Compaq nx6325 (RS482) with Radeon KMS
> Submitter       : Jure Repinc <jlp.bugs@gmail.com>
> Date            : 2010-06-04 21:14 (5 days old)
> Handled-By      : Dave Airlie <airlied@linux.ie>
> Patch           : https://bugzilla.kernel.org/attachment.cgi?id=26677
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16092
> Subject         : Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
> Submitter       : Christian Casteyde <casteyde.christian@free.fr>
> Date            : 2010-06-01 18:08 (8 days old)
> Handled-By      : Venki <venki@google.com>
> Patch           : https://bugzilla.kernel.org/show_bug.cgi?id=16092#c2
>
>
> For details, please visit the bug entries and follow the links given in
> references.
>
> As you can see, there is a Bugzilla entry for each of the listed regressions.
> There also is a Bugzilla entry used for tracking the regressions from 2.6.34,
> unresolved as well as resolved, at:
>
> http://bugzilla.kernel.org/show_bug.cgi?id=16055
>
> Please let the tracking team know if there are any Bugzilla entries that
> should be added to the list in there.
>
> Thanks!
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  9:02   ` Sedat Dilek
  0 siblings, 0 replies; 129+ messages in thread
From: Sedat Dilek @ 2010-06-09  9:02 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
	Linus Torvalds, Kernel Testers List, Network Development,
	Linux ACPI, Linux PM List, Linux SCSI List, Linux Wireless List,
	DRI, dmonakhov

The patch from [1] is still missing.

   "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
Dmitry Monakhoc

Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>

I have already reported this issue on LKML [2] and cpufreq ML [3].

- Sedat -

[1] http://www.spinics.net/lists/cpufreq/msg01631.html
[2] http://lkml.org/lkml/2010/5/31/77
[3] http://www.spinics.net/lists/cpufreq/msg01637.html

On Wed, Jun 9, 2010 at 12:06 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> [NOTES:
>  * This by no means is a complete list, but we only put e-mail reports that
>   are at least 1 week old into the Bugzilla.
>  * Quite a few of the already reported regressions may be related to the bug
>   fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
>   bug in scrup, vt.c"), so reporters please retest with this commit applied.]
>
> This message contains a list of some regressions from 2.6.34,
> for which there are no fixes in the mainline known to the tracking team.
> If any of them have been fixed already, please let us know.
>
> If you know of any other unresolved regressions from 2.6.34, please let us
> know either and we'll add them to the list.  Also, please let us know
> if any of the entries below are invalid.
>
> Each entry from the list will be sent additionally in an automatic reply
> to this message with CCs to the people involved in reporting and handling
> the issue.
>
>
> Listed regressions statistics:
>
>  Date          Total  Pending  Unresolved
>  ----------------------------------------
>  2010-06-09       15       13          10
>
>
> Unresolved regressions
> ----------------------
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16163
> Subject         : [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> Submitter       : David John <davidjon@xenontk.org>
> Date            : 2010-06-02 12:52 (7 days old)
> Message-ID      : <4C065423.3000202@xenontk.org>
> References      : http://marc.info/?l=linux-kernel&m=127548313828613&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16161
> Subject         : [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
> Submitter       : Mikael Pettersson <mikpe@it.uu.se>
> Date            : 2010-06-01 19:57 (8 days old)
> Message-ID      : <19461.26166.427857.612983@pilspetsen.it.uu.se>
> References      : http://marc.info/?l=linux-kernel&m=127542227511925&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16160
> Subject         : 2.6.35 Radeon KMS power management regression?
> Submitter       : Nigel Cunningham <ncunningham@crca.org.au>
> Date            : 2010-06-01 6:23 (8 days old)
> Message-ID      : <4C04A767.8000209@crca.org.au>
> References      : http://marc.info/?l=linux-kernel&m=127537343722290&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16145
> Subject         : Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable"
> Submitter       : Tom Gundersen <teg@jklm.no>
> Date            : 2010-06-07 13:11 (2 days old)
> Handled-By      : Venkatesh Pallipadi <venki@google.com>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16129
> Subject         : BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> Submitter       : Jan Kreuzer <kontrollator@gmx.de>
> Date            : 2010-06-05 06:15 (4 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16122
> Subject         : 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> Submitter       : Larry Finger <Larry.Finger@lwfinger.net>
> Date            : 2010-06-04 13:18 (5 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16120
> Subject         : Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
> Submitter       : Alex Zhavnerchik <alex.vizor@gmail.com>
> Date            : 2010-06-04 09:25 (5 days old)
> Handled-By      : Eric Dumazet <eric.dumazet@gmail.com>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16104
> Subject         : Radeon KMS does not start after merge of the new PM-Code
> Submitter       : Jan Kreuzer <kontrollator@gmx.de>
> Date            : 2010-06-02 07:47 (7 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16090
> Subject         : sysfs: cannot create duplicate filename
> Submitter       : Tobias <devnull@plzk.org>
> Date            : 2010-06-01 15:59 (8 days old)
> Handled-By      : Jesse Barnes <jbarnes@virtuousgeek.org>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16037
> Subject         : NULL Pointer dereference in __ir_input_register/budget_ci_attach
> Submitter       : Sean Finney <seanius@debian.org>
> Date            : 2010-05-23 19:52 (17 days old)
>
>
> Regressions with patches
> ------------------------
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16131
> Subject         : kernel BUG at fs/btrfs/extent-tree.c:4363 (btrfs_free_tree_block)
> Submitter       : Chow Loong Jin <hyperair@ubuntu.com>
> Date            : 2010-06-05 18:53 (4 days old)
> Handled-By      : Yan Zheng <zheng.yan@oracle.com>
> Patch           : https://patchwork.kernel.org/patch/103235/
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16127
> Subject         : Boot freeze on HP Compaq nx6325 (RS482) with Radeon KMS
> Submitter       : Jure Repinc <jlp.bugs@gmail.com>
> Date            : 2010-06-04 21:14 (5 days old)
> Handled-By      : Dave Airlie <airlied@linux.ie>
> Patch           : https://bugzilla.kernel.org/attachment.cgi?id=26677
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16092
> Subject         : Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
> Submitter       : Christian Casteyde <casteyde.christian@free.fr>
> Date            : 2010-06-01 18:08 (8 days old)
> Handled-By      : Venki <venki@google.com>
> Patch           : https://bugzilla.kernel.org/show_bug.cgi?id=16092#c2
>
>
> For details, please visit the bug entries and follow the links given in
> references.
>
> As you can see, there is a Bugzilla entry for each of the listed regressions.
> There also is a Bugzilla entry used for tracking the regressions from 2.6.34,
> unresolved as well as resolved, at:
>
> http://bugzilla.kernel.org/show_bug.cgi?id=16055
>
> Please let the tracking team know if there are any Bugzilla entries that
> should be added to the list in there.
>
> Thanks!
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
                   ` (14 preceding siblings ...)
  2010-06-09  1:53 ` Linus Torvalds
@ 2010-06-09  9:02 ` Sedat Dilek
  2010-06-09  9:02   ` Sedat Dilek
  2010-06-09  9:02 ` Sedat Dilek
  17 siblings, 0 replies; 129+ messages in thread
From: Sedat Dilek @ 2010-06-09  9:02 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, dmonakhov, Andrew Morton,
	Kernel Testers List, Linus Torvalds, Linux PM List,
	Maciej Rutecki

The patch from [1] is still missing.

   "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
Dmitry Monakhoc

Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>

I have already reported this issue on LKML [2] and cpufreq ML [3].

- Sedat -

[1] http://www.spinics.net/lists/cpufreq/msg01631.html
[2] http://lkml.org/lkml/2010/5/31/77
[3] http://www.spinics.net/lists/cpufreq/msg01637.html

On Wed, Jun 9, 2010 at 12:06 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> [NOTES:
>  * This by no means is a complete list, but we only put e-mail reports that
>   are at least 1 week old into the Bugzilla.
>  * Quite a few of the already reported regressions may be related to the bug
>   fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
>   bug in scrup, vt.c"), so reporters please retest with this commit applied.]
>
> This message contains a list of some regressions from 2.6.34,
> for which there are no fixes in the mainline known to the tracking team.
> If any of them have been fixed already, please let us know.
>
> If you know of any other unresolved regressions from 2.6.34, please let us
> know either and we'll add them to the list.  Also, please let us know
> if any of the entries below are invalid.
>
> Each entry from the list will be sent additionally in an automatic reply
> to this message with CCs to the people involved in reporting and handling
> the issue.
>
>
> Listed regressions statistics:
>
>  Date          Total  Pending  Unresolved
>  ----------------------------------------
>  2010-06-09       15       13          10
>
>
> Unresolved regressions
> ----------------------
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16163
> Subject         : [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> Submitter       : David John <davidjon@xenontk.org>
> Date            : 2010-06-02 12:52 (7 days old)
> Message-ID      : <4C065423.3000202@xenontk.org>
> References      : http://marc.info/?l=linux-kernel&m=127548313828613&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16161
> Subject         : [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
> Submitter       : Mikael Pettersson <mikpe@it.uu.se>
> Date            : 2010-06-01 19:57 (8 days old)
> Message-ID      : <19461.26166.427857.612983@pilspetsen.it.uu.se>
> References      : http://marc.info/?l=linux-kernel&m=127542227511925&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16160
> Subject         : 2.6.35 Radeon KMS power management regression?
> Submitter       : Nigel Cunningham <ncunningham@crca.org.au>
> Date            : 2010-06-01 6:23 (8 days old)
> Message-ID      : <4C04A767.8000209@crca.org.au>
> References      : http://marc.info/?l=linux-kernel&m=127537343722290&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16145
> Subject         : Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable"
> Submitter       : Tom Gundersen <teg@jklm.no>
> Date            : 2010-06-07 13:11 (2 days old)
> Handled-By      : Venkatesh Pallipadi <venki@google.com>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16129
> Subject         : BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> Submitter       : Jan Kreuzer <kontrollator@gmx.de>
> Date            : 2010-06-05 06:15 (4 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16122
> Subject         : 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> Submitter       : Larry Finger <Larry.Finger@lwfinger.net>
> Date            : 2010-06-04 13:18 (5 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16120
> Subject         : Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
> Submitter       : Alex Zhavnerchik <alex.vizor@gmail.com>
> Date            : 2010-06-04 09:25 (5 days old)
> Handled-By      : Eric Dumazet <eric.dumazet@gmail.com>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16104
> Subject         : Radeon KMS does not start after merge of the new PM-Code
> Submitter       : Jan Kreuzer <kontrollator@gmx.de>
> Date            : 2010-06-02 07:47 (7 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16090
> Subject         : sysfs: cannot create duplicate filename
> Submitter       : Tobias <devnull@plzk.org>
> Date            : 2010-06-01 15:59 (8 days old)
> Handled-By      : Jesse Barnes <jbarnes@virtuousgeek.org>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16037
> Subject         : NULL Pointer dereference in __ir_input_register/budget_ci_attach
> Submitter       : Sean Finney <seanius@debian.org>
> Date            : 2010-05-23 19:52 (17 days old)
>
>
> Regressions with patches
> ------------------------
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16131
> Subject         : kernel BUG at fs/btrfs/extent-tree.c:4363 (btrfs_free_tree_block)
> Submitter       : Chow Loong Jin <hyperair@ubuntu.com>
> Date            : 2010-06-05 18:53 (4 days old)
> Handled-By      : Yan Zheng <zheng.yan@oracle.com>
> Patch           : https://patchwork.kernel.org/patch/103235/
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16127
> Subject         : Boot freeze on HP Compaq nx6325 (RS482) with Radeon KMS
> Submitter       : Jure Repinc <jlp.bugs@gmail.com>
> Date            : 2010-06-04 21:14 (5 days old)
> Handled-By      : Dave Airlie <airlied@linux.ie>
> Patch           : https://bugzilla.kernel.org/attachment.cgi?id=26677
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16092
> Subject         : Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
> Submitter       : Christian Casteyde <casteyde.christian@free.fr>
> Date            : 2010-06-01 18:08 (8 days old)
> Handled-By      : Venki <venki@google.com>
> Patch           : https://bugzilla.kernel.org/show_bug.cgi?id=16092#c2
>
>
> For details, please visit the bug entries and follow the links given in
> references.
>
> As you can see, there is a Bugzilla entry for each of the listed regressions.
> There also is a Bugzilla entry used for tracking the regressions from 2.6.34,
> unresolved as well as resolved, at:
>
> http://bugzilla.kernel.org/show_bug.cgi?id=16055
>
> Please let the tracking team know if there are any Bugzilla entries that
> should be added to the list in there.
>
> Thanks!
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
_______________________________________________
linux-pm mailing list
linux-pm@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
                   ` (16 preceding siblings ...)
  2010-06-09  9:02   ` Sedat Dilek
@ 2010-06-09  9:02 ` Sedat Dilek
  17 siblings, 0 replies; 129+ messages in thread
From: Sedat Dilek @ 2010-06-09  9:02 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, dmonakhov, Andrew Morton,
	Kernel Testers List, Linus Torvalds, Linux PM List,
	Maciej Rutecki

The patch from [1] is still missing.

   "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
Dmitry Monakhoc

Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>

I have already reported this issue on LKML [2] and cpufreq ML [3].

- Sedat -

[1] http://www.spinics.net/lists/cpufreq/msg01631.html
[2] http://lkml.org/lkml/2010/5/31/77
[3] http://www.spinics.net/lists/cpufreq/msg01637.html

On Wed, Jun 9, 2010 at 12:06 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> [NOTES:
>  * This by no means is a complete list, but we only put e-mail reports that
>   are at least 1 week old into the Bugzilla.
>  * Quite a few of the already reported regressions may be related to the bug
>   fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
>   bug in scrup, vt.c"), so reporters please retest with this commit applied.]
>
> This message contains a list of some regressions from 2.6.34,
> for which there are no fixes in the mainline known to the tracking team.
> If any of them have been fixed already, please let us know.
>
> If you know of any other unresolved regressions from 2.6.34, please let us
> know either and we'll add them to the list.  Also, please let us know
> if any of the entries below are invalid.
>
> Each entry from the list will be sent additionally in an automatic reply
> to this message with CCs to the people involved in reporting and handling
> the issue.
>
>
> Listed regressions statistics:
>
>  Date          Total  Pending  Unresolved
>  ----------------------------------------
>  2010-06-09       15       13          10
>
>
> Unresolved regressions
> ----------------------
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16163
> Subject         : [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> Submitter       : David John <davidjon@xenontk.org>
> Date            : 2010-06-02 12:52 (7 days old)
> Message-ID      : <4C065423.3000202@xenontk.org>
> References      : http://marc.info/?l=linux-kernel&m=127548313828613&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16161
> Subject         : [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
> Submitter       : Mikael Pettersson <mikpe@it.uu.se>
> Date            : 2010-06-01 19:57 (8 days old)
> Message-ID      : <19461.26166.427857.612983@pilspetsen.it.uu.se>
> References      : http://marc.info/?l=linux-kernel&m=127542227511925&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16160
> Subject         : 2.6.35 Radeon KMS power management regression?
> Submitter       : Nigel Cunningham <ncunningham@crca.org.au>
> Date            : 2010-06-01 6:23 (8 days old)
> Message-ID      : <4C04A767.8000209@crca.org.au>
> References      : http://marc.info/?l=linux-kernel&m=127537343722290&w=2
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16145
> Subject         : Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable"
> Submitter       : Tom Gundersen <teg@jklm.no>
> Date            : 2010-06-07 13:11 (2 days old)
> Handled-By      : Venkatesh Pallipadi <venki@google.com>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16129
> Subject         : BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> Submitter       : Jan Kreuzer <kontrollator@gmx.de>
> Date            : 2010-06-05 06:15 (4 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16122
> Subject         : 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170
> Submitter       : Larry Finger <Larry.Finger@lwfinger.net>
> Date            : 2010-06-04 13:18 (5 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16120
> Subject         : Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null)
> Submitter       : Alex Zhavnerchik <alex.vizor@gmail.com>
> Date            : 2010-06-04 09:25 (5 days old)
> Handled-By      : Eric Dumazet <eric.dumazet@gmail.com>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16104
> Subject         : Radeon KMS does not start after merge of the new PM-Code
> Submitter       : Jan Kreuzer <kontrollator@gmx.de>
> Date            : 2010-06-02 07:47 (7 days old)
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16090
> Subject         : sysfs: cannot create duplicate filename
> Submitter       : Tobias <devnull@plzk.org>
> Date            : 2010-06-01 15:59 (8 days old)
> Handled-By      : Jesse Barnes <jbarnes@virtuousgeek.org>
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16037
> Subject         : NULL Pointer dereference in __ir_input_register/budget_ci_attach
> Submitter       : Sean Finney <seanius@debian.org>
> Date            : 2010-05-23 19:52 (17 days old)
>
>
> Regressions with patches
> ------------------------
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16131
> Subject         : kernel BUG at fs/btrfs/extent-tree.c:4363 (btrfs_free_tree_block)
> Submitter       : Chow Loong Jin <hyperair@ubuntu.com>
> Date            : 2010-06-05 18:53 (4 days old)
> Handled-By      : Yan Zheng <zheng.yan@oracle.com>
> Patch           : https://patchwork.kernel.org/patch/103235/
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16127
> Subject         : Boot freeze on HP Compaq nx6325 (RS482) with Radeon KMS
> Submitter       : Jure Repinc <jlp.bugs@gmail.com>
> Date            : 2010-06-04 21:14 (5 days old)
> Handled-By      : Dave Airlie <airlied@linux.ie>
> Patch           : https://bugzilla.kernel.org/attachment.cgi?id=26677
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=16092
> Subject         : Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
> Submitter       : Christian Casteyde <casteyde.christian@free.fr>
> Date            : 2010-06-01 18:08 (8 days old)
> Handled-By      : Venki <venki@google.com>
> Patch           : https://bugzilla.kernel.org/show_bug.cgi?id=16092#c2
>
>
> For details, please visit the bug entries and follow the links given in
> references.
>
> As you can see, there is a Bugzilla entry for each of the listed regressions.
> There also is a Bugzilla entry used for tracking the regressions from 2.6.34,
> unresolved as well as resolved, at:
>
> http://bugzilla.kernel.org/show_bug.cgi?id=16055
>
> Please let the tracking team know if there are any Bugzilla entries that
> should be added to the list in there.
>
> Thanks!
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--
_______________________________________________
Dri-devel mailing list
Dri-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
@ 2010-06-09  9:06     ` Rafael J. Wysocki
  -1 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  9:06 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Carl Worth, Eric Anholt, Venkatesh Pallipadi, Jens Axboe,
	Dave Airlie, Jesse Barnes, Ingo Molnar, David Härdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

On Wednesday 09 June 2010, Linus Torvalds wrote:
> 
> [ Added lots of cc's to direct specific people to look at the regressions 
>   that may or may not be theirs... ]
> 
> On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
> >
> >  * Quite a few of the already reported regressions may be related to the bug
> >    fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
> >    bug in scrup, vt.c"), so reporters please retest with this commit applied.]
> 
> From a quick look, most of them look unrelated to that unfortunate bug. 
> It's hard to tell for sure, of course (memory corruption can do pretty 
> much anything), but I'm not seeing the 07200720.. pattern at least.
> 
> And some of them do seem to be bisected to likely culprits and/or have 
> patches that are claimed to have fixed them.
> 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> > Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> > Submitter	: David John <davidjon@xenontk.org>
> > Date		: 2010-06-02 12:52 (7 days old)
> > Message-ID	: <4C065423.3000202@xenontk.org>
> > References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2
> 
> That has a "reverting the commit fixes it", and a confirmation from Nick 
> Bowler.
> 
> Eric, Carl: should I just revert that commit? Or do you have a fix?

This one is reported to have been fixed already.  Closed now.

...
> 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16104
> > Subject	: Radeon KMS does not start after merge of the new PM-Code
> > Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> > Date		: 2010-06-02 07:47 (7 days old)
> 
> This one also has a patch in Bugzilla, I think Airlie is just waiting to 
> calm down his queue and already removed the dependency on the temperature 
> code. DaveA?

This should be fixed by commit f8ed8b4c5d30b5214f185997131b06e35f6f7113, so
closing now.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  9:06     ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  9:06 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Jens Axboe, Linux PM List, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Linux SCSI List,
	Carl Worth, Härdeman, Network Development, Ingo Molnar,
	Kernel Testers List, Andrew Morton, Maciej Rutecki

On Wednesday 09 June 2010, Linus Torvalds wrote:
> 
> [ Added lots of cc's to direct specific people to look at the regressions 
>   that may or may not be theirs... ]
> 
> On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
> >
> >  * Quite a few of the already reported regressions may be related to the bug
> >    fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
> >    bug in scrup, vt.c"), so reporters please retest with this commit applied.]
> 
> From a quick look, most of them look unrelated to that unfortunate bug. 
> It's hard to tell for sure, of course (memory corruption can do pretty 
> much anything), but I'm not seeing the 07200720.. pattern at least.
> 
> And some of them do seem to be bisected to likely culprits and/or have 
> patches that are claimed to have fixed them.
> 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> > Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> > Submitter	: David John <davidjon@xenontk.org>
> > Date		: 2010-06-02 12:52 (7 days old)
> > Message-ID	: <4C065423.3000202@xenontk.org>
> > References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2
> 
> That has a "reverting the commit fixes it", and a confirmation from Nick 
> Bowler.
> 
> Eric, Carl: should I just revert that commit? Or do you have a fix?

This one is reported to have been fixed already.  Closed now.

...
> 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16104
> > Subject	: Radeon KMS does not start after merge of the new PM-Code
> > Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> > Date		: 2010-06-02 07:47 (7 days old)
> 
> This one also has a patch in Bugzilla, I think Airlie is just waiting to 
> calm down his queue and already removed the dependency on the temperature 
> code. DaveA?

This should be fixed by commit f8ed8b4c5d30b5214f185997131b06e35f6f7113, so
closing now.

Rafael

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  1:53   ` Linus Torvalds
                     ` (15 preceding siblings ...)
  (?)
@ 2010-06-09  9:06   ` Rafael J. Wysocki
  -1 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  9:06 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Jens Axboe, Linux PM List, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, David, Linux SCSI List,
	Eric Anholt, Carl Worth, Härdeman, Network Development,
	Ingo Molnar, Kernel Testers List

On Wednesday 09 June 2010, Linus Torvalds wrote:
> 
> [ Added lots of cc's to direct specific people to look at the regressions 
>   that may or may not be theirs... ]
> 
> On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
> >
> >  * Quite a few of the already reported regressions may be related to the bug
> >    fixed by 386f40c86d6c8d5b717ef20620af1a750d0dacb4 (Revert "tty: fix a little
> >    bug in scrup, vt.c"), so reporters please retest with this commit applied.]
> 
> From a quick look, most of them look unrelated to that unfortunate bug. 
> It's hard to tell for sure, of course (memory corruption can do pretty 
> much anything), but I'm not seeing the 07200720.. pattern at least.
> 
> And some of them do seem to be bisected to likely culprits and/or have 
> patches that are claimed to have fixed them.
> 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16163
> > Subject	: [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off
> > Submitter	: David John <davidjon@xenontk.org>
> > Date		: 2010-06-02 12:52 (7 days old)
> > Message-ID	: <4C065423.3000202@xenontk.org>
> > References	: http://marc.info/?l=linux-kernel&m=127548313828613&w=2
> 
> That has a "reverting the commit fixes it", and a confirmation from Nick 
> Bowler.
> 
> Eric, Carl: should I just revert that commit? Or do you have a fix?

This one is reported to have been fixed already.  Closed now.

...
> 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16104
> > Subject	: Radeon KMS does not start after merge of the new PM-Code
> > Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> > Date		: 2010-06-02 07:47 (7 days old)
> 
> This one also has a patch in Bugzilla, I think Airlie is just waiting to 
> calm down his queue and already removed the dependency on the temperature 
> code. DaveA?

This should be fixed by commit f8ed8b4c5d30b5214f185997131b06e35f6f7113, so
closing now.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  9:22     ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  9:22 UTC (permalink / raw)
  To: sedat.dilek
  Cc: Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
	Linus Torvalds, Kernel Testers List, Network Development,
	Linux ACPI, Linux PM List, Linux SCSI List, Linux Wireless List,
	DRI, dmonakhov

On Wednesday 09 June 2010, Sedat Dilek wrote:
> The patch from [1] is still missing.
> 
>    "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
> Dmitry Monakhoc
> 
> Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
> Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>
> 
> I have already reported this issue on LKML [2] and cpufreq ML [3].
> 
> - Sedat -
> 
> [1] http://www.spinics.net/lists/cpufreq/msg01631.html
> [2] http://lkml.org/lkml/2010/5/31/77
> [3] http://www.spinics.net/lists/cpufreq/msg01637.html

Thanks, added.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-09  9:22     ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  9:22 UTC (permalink / raw)
  To: sedat.dilek-Re5JQEeQqe8AvxtiuMwx3w
  Cc: Linux Kernel Mailing List, Maciej Rutecki, Andrew Morton,
	Linus Torvalds, Kernel Testers List, Network Development,
	Linux ACPI, Linux PM List, Linux SCSI List, Linux Wireless List,
	DRI, dmonakhov-GEFAQzZX7r8dnm+yROfE0A

On Wednesday 09 June 2010, Sedat Dilek wrote:
> The patch from [1] is still missing.
> 
>    "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
> Dmitry Monakhoc
> 
> Tested-by: Sedat Dilek <sedat.dilek-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Tested-by Maciej Rutecki <maciej.rutecki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> I have already reported this issue on LKML [2] and cpufreq ML [3].
> 
> - Sedat -
> 
> [1] http://www.spinics.net/lists/cpufreq/msg01631.html
> [2] http://lkml.org/lkml/2010/5/31/77
> [3] http://www.spinics.net/lists/cpufreq/msg01637.html

Thanks, added.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  9:02   ` Sedat Dilek
  (?)
@ 2010-06-09  9:22   ` Rafael J. Wysocki
  -1 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  9:22 UTC (permalink / raw)
  To: sedat.dilek
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, dmonakhov, Andrew Morton,
	Kernel Testers List, Linus Torvalds, Linux PM List,
	Maciej Rutecki

On Wednesday 09 June 2010, Sedat Dilek wrote:
> The patch from [1] is still missing.
> 
>    "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
> Dmitry Monakhoc
> 
> Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
> Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>
> 
> I have already reported this issue on LKML [2] and cpufreq ML [3].
> 
> - Sedat -
> 
> [1] http://www.spinics.net/lists/cpufreq/msg01631.html
> [2] http://lkml.org/lkml/2010/5/31/77
> [3] http://www.spinics.net/lists/cpufreq/msg01637.html

Thanks, added.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  9:02   ` Sedat Dilek
                     ` (2 preceding siblings ...)
  (?)
@ 2010-06-09  9:22   ` Rafael J. Wysocki
  -1 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09  9:22 UTC (permalink / raw)
  To: sedat.dilek
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, dmonakhov, Andrew Morton,
	Kernel Testers List, Linus Torvalds, Linux PM List,
	Maciej Rutecki

On Wednesday 09 June 2010, Sedat Dilek wrote:
> The patch from [1] is still missing.
> 
>    "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
> Dmitry Monakhoc
> 
> Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
> Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>
> 
> I have already reported this issue on LKML [2] and cpufreq ML [3].
> 
> - Sedat -
> 
> [1] http://www.spinics.net/lists/cpufreq/msg01631.html
> [2] http://lkml.org/lkml/2010/5/31/77
> [3] http://www.spinics.net/lists/cpufreq/msg01637.html

Thanks, added.

Rafael

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  7:53   ` Jens Axboe
                       ` (2 preceding siblings ...)
  2010-06-09  8:55     ` Rafael J. Wysocki
@ 2010-06-09  9:32     ` Ingo Molnar
  2010-06-09  9:39       ` Jens Axboe
                         ` (2 more replies)
  2010-06-09  9:32     ` Ingo Molnar
                       ` (3 subsequent siblings)
  7 siblings, 3 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-09  9:32 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Linus Torvalds, Rafael J. Wysocki, Carl Worth, Eric Anholt,
	Venkatesh Pallipadi, Dave Airlie, Jesse Barnes, David H?rdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI


* Jens Axboe <jaxboe@fusionio.com> wrote:

> On 2010-06-09 03:53, Linus Torvalds wrote:
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> >> Date		: 2010-06-05 06:15 (4 days old)
> > 
> > This seems to have been introduced by
> > 
> > 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> > 	Author: Ingo Molnar <mingo@elte.hu>
> > 	Date:   Sat Nov 8 17:05:38 2008 +0100
> > 
> > 	    sched: optimize sched_clock() a bit
> >     
> > 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> > 	    variant of __cycles_2_ns().
> >     
> > 	    Most of the time sched_clock() is called with irqs disabled already.
> > 	    The few places that call it with irqs enabled need to be updated.
> >     
> > 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> > 
> > and this seems to be one of those calling cases that need to be updated.
> > 
> > Ingo? The call trace is:
> > 
> > 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> > 	caller is native_sched_clock+0x3c/0x68
> > 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> > 	Call Trace:
> > 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> > 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> > 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> > 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> > 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> > 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> > 	[<ffffffff81215537>] __make_request+0x338/0x45b
> > 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> > 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> > 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> > 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> > 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> > 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> > 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> > 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> > 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> > 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> > 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> > 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> > 
> > (from the bugzilla thing)
> 
> This should be fixed by commit 28f4197e which was merged on friday.

The scheduler commit adding local_clock() (for .36) is:

  c676329: sched_clock: Add local_clock() API and improve documentation

So once that is upstream the block IO statistics code can use that.

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  7:53   ` Jens Axboe
                       ` (4 preceding siblings ...)
  2010-06-09  9:32     ` Ingo Molnar
@ 2010-06-09  9:32     ` Ingo Molnar
  2010-06-11  8:32       ` Ingo Molnar
  2010-06-11  8:32     ` Ingo Molnar
  7 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-09  9:32 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Eric Anholt, Carl Worth,
	David H?rdeman, Network Development, Andrew Morton,
	Kernel Testers List, Dave Airlie, Linux PM List, Linux SCSI List


* Jens Axboe <jaxboe@fusionio.com> wrote:

> On 2010-06-09 03:53, Linus Torvalds wrote:
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> >> Date		: 2010-06-05 06:15 (4 days old)
> > 
> > This seems to have been introduced by
> > 
> > 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> > 	Author: Ingo Molnar <mingo@elte.hu>
> > 	Date:   Sat Nov 8 17:05:38 2008 +0100
> > 
> > 	    sched: optimize sched_clock() a bit
> >     
> > 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> > 	    variant of __cycles_2_ns().
> >     
> > 	    Most of the time sched_clock() is called with irqs disabled already.
> > 	    The few places that call it with irqs enabled need to be updated.
> >     
> > 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> > 
> > and this seems to be one of those calling cases that need to be updated.
> > 
> > Ingo? The call trace is:
> > 
> > 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> > 	caller is native_sched_clock+0x3c/0x68
> > 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> > 	Call Trace:
> > 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> > 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> > 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> > 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> > 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> > 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> > 	[<ffffffff81215537>] __make_request+0x338/0x45b
> > 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> > 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> > 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> > 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> > 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> > 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> > 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> > 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> > 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> > 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> > 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> > 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> > 
> > (from the bugzilla thing)
> 
> This should be fixed by commit 28f4197e which was merged on friday.

The scheduler commit adding local_clock() (for .36) is:

  c676329: sched_clock: Add local_clock() API and improve documentation

So once that is upstream the block IO statistics code can use that.

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  7:53   ` Jens Axboe
                       ` (3 preceding siblings ...)
  2010-06-09  9:32     ` Ingo Molnar
@ 2010-06-09  9:32     ` Ingo Molnar
  2010-06-09  9:32     ` Ingo Molnar
                       ` (2 subsequent siblings)
  7 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-09  9:32 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Linux SCSI List,
	Rafael J. Wysocki, Carl Worth, David H?rdeman,
	Network Development, Andrew Morton, Kernel Testers List,
	Linux PM List, Maciej Rutecki


* Jens Axboe <jaxboe@fusionio.com> wrote:

> On 2010-06-09 03:53, Linus Torvalds wrote:
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> >> Date		: 2010-06-05 06:15 (4 days old)
> > 
> > This seems to have been introduced by
> > 
> > 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> > 	Author: Ingo Molnar <mingo@elte.hu>
> > 	Date:   Sat Nov 8 17:05:38 2008 +0100
> > 
> > 	    sched: optimize sched_clock() a bit
> >     
> > 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> > 	    variant of __cycles_2_ns().
> >     
> > 	    Most of the time sched_clock() is called with irqs disabled already.
> > 	    The few places that call it with irqs enabled need to be updated.
> >     
> > 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> > 
> > and this seems to be one of those calling cases that need to be updated.
> > 
> > Ingo? The call trace is:
> > 
> > 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> > 	caller is native_sched_clock+0x3c/0x68
> > 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> > 	Call Trace:
> > 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> > 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> > 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> > 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> > 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> > 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> > 	[<ffffffff81215537>] __make_request+0x338/0x45b
> > 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> > 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> > 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> > 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> > 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> > 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> > 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> > 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> > 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> > 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> > 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> > 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> > 
> > (from the bugzilla thing)
> 
> This should be fixed by commit 28f4197e which was merged on friday.

The scheduler commit adding local_clock() (for .36) is:

  c676329: sched_clock: Add local_clock() API and improve documentation

So once that is upstream the block IO statistics code can use that.

Thanks,

	Ingo

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  9:32     ` Ingo Molnar
  2010-06-09  9:39       ` Jens Axboe
  2010-06-09  9:39       ` Jens Axboe
@ 2010-06-09  9:39       ` Jens Axboe
  2 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-09  9:39 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Linus Torvalds, Rafael J. Wysocki, Carl Worth, Eric Anholt,
	Venkatesh Pallipadi, Dave Airlie, Jesse Barnes, David H?rdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

On 2010-06-09 11:32, Ingo Molnar wrote:
>> This should be fixed by commit 28f4197e which was merged on friday.
> 
> The scheduler commit adding local_clock() (for .36) is:
> 
>   c676329: sched_clock: Add local_clock() API and improve documentation
> 
> So once that is upstream the block IO statistics code can use that.

Thanks, I'll have to make a note of that.

-- 
Jens Axboe


^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  9:32     ` Ingo Molnar
  2010-06-09  9:39       ` Jens Axboe
@ 2010-06-09  9:39       ` Jens Axboe
  2010-06-09  9:39       ` Jens Axboe
  2 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-09  9:39 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Eric Anholt, Carl Worth,
	David H?rdeman, Network Development, Andrew Morton,
	Kernel Testers List, Dave Airlie, Linux PM List, Linux SCSI List

On 2010-06-09 11:32, Ingo Molnar wrote:
>> This should be fixed by commit 28f4197e which was merged on friday.
> 
> The scheduler commit adding local_clock() (for .36) is:
> 
>   c676329: sched_clock: Add local_clock() API and improve documentation
> 
> So once that is upstream the block IO statistics code can use that.

Thanks, I'll have to make a note of that.

-- 
Jens Axboe

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  9:32     ` Ingo Molnar
@ 2010-06-09  9:39       ` Jens Axboe
  2010-06-09  9:39       ` Jens Axboe
  2010-06-09  9:39       ` Jens Axboe
  2 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-09  9:39 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Linux SCSI List,
	Rafael J. Wysocki, Carl Worth, David H?rdeman,
	Network Development, Andrew Morton, Kernel Testers List,
	Linux PM List, Maciej Rutecki

On 2010-06-09 11:32, Ingo Molnar wrote:
>> This should be fixed by commit 28f4197e which was merged on friday.
> 
> The scheduler commit adding local_clock() (for .36) is:
> 
>   c676329: sched_clock: Add local_clock() API and improve documentation
> 
> So once that is upstream the block IO statistics code can use that.

Thanks, I'll have to make a note of that.

-- 
Jens Axboe


------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
  2010-06-08 22:10   ` Rafael J. Wysocki
@ 2010-06-09 12:39     ` Mikael Pettersson
  -1 siblings, 0 replies; 129+ messages in thread
From: Mikael Pettersson @ 2010-06-09 12:39 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Linux Kernel Mailing List, Kernel Testers List, Maciej Rutecki,
	Mikael Pettersson

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a summary report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.34.  Please verify if it still should be listed and let the tracking team
> know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=3D16161
> Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename =
> ... XVR-600 related?
> Submitter	: Mikael Pettersson <mikpe@it.uu.se>
> Date		: 2010-06-01 19:57 (8 days old)
> Message-ID	: <19461.26166.427857.612983@pilspetsen.it.uu.se>
> References	: http://marc.info/?l=3Dlinux-kernel&m=3D127542227511925&w=3D2

The bug is still there in 2.6.35-rc2. I haven't checked post-rc2 git snapshots.

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-09 12:39     ` Mikael Pettersson
  0 siblings, 0 replies; 129+ messages in thread
From: Mikael Pettersson @ 2010-06-09 12:39 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Linux Kernel Mailing List, Kernel Testers List, Maciej Rutecki,
	Mikael Pettersson

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a summary report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.34.  Please verify if it still should be listed and let the tracking team
> know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=3D16161
> Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename =
> ... XVR-600 related?
> Submitter	: Mikael Pettersson <mikpe-1zs4UD6AkMk@public.gmane.org>
> Date		: 2010-06-01 19:57 (8 days old)
> Message-ID	: <19461.26166.427857.612983-tgku4HJDRZih8lFjZTKsyTAV6s6igYVG@public.gmane.org>
> References	: http://marc.info/?l=3Dlinux-kernel&m=3D127542227511925&w=3D2

The bug is still there in 2.6.35-rc2. I haven't checked post-rc2 git snapshots.

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  9:06     ` Rafael J. Wysocki
  (?)
  (?)
@ 2010-06-09 14:24     ` Linus Torvalds
  -1 siblings, 0 replies; 129+ messages in thread
From: Linus Torvalds @ 2010-06-09 14:24 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Carl Worth, Eric Anholt, Venkatesh Pallipadi, Jens Axboe,
	Dave Airlie, Jesse Barnes, Ingo Molnar, David  Härdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI



On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
> > 
> > That has a "reverting the commit fixes it", and a confirmation from Nick 
> > Bowler.
> > 
> > Eric, Carl: should I just revert that commit? Or do you have a fix?
> 
> This one is reported to have been fixed already.  Closed now.

Heh. That "fixed already" is actually the revert. Carl acked it.

> This should be fixed by commit f8ed8b4c5d30b5214f185997131b06e35f6f7113, so
> closing now.

Good, that was in yesterday's drm pull.

		Linus

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  9:06     ` Rafael J. Wysocki
                       ` (2 preceding siblings ...)
  (?)
@ 2010-06-09 14:24     ` Linus Torvalds
  -1 siblings, 0 replies; 129+ messages in thread
From: Linus Torvalds @ 2010-06-09 14:24 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Jens Axboe, Linux PM List, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Linux SCSI List,
	Eric Anholt, Carl Worth, David  Härdeman,
	Network Development, Ingo Molnar, Kernel Testers List,
	Dave Airlie



On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
> > 
> > That has a "reverting the commit fixes it", and a confirmation from Nick 
> > Bowler.
> > 
> > Eric, Carl: should I just revert that commit? Or do you have a fix?
> 
> This one is reported to have been fixed already.  Closed now.

Heh. That "fixed already" is actually the revert. Carl acked it.

> This should be fixed by commit f8ed8b4c5d30b5214f185997131b06e35f6f7113, so
> closing now.

Good, that was in yesterday's drm pull.

		Linus

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  9:06     ` Rafael J. Wysocki
  (?)
@ 2010-06-09 14:24     ` Linus Torvalds
  -1 siblings, 0 replies; 129+ messages in thread
From: Linus Torvalds @ 2010-06-09 14:24 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Jens Axboe, Linux PM List, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Linux SCSI List,
	Carl Worth, David  Härdeman, Network Development,
	Ingo Molnar, Kernel Testers List, Andrew Morton, Maciej Rutecki



On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
> > 
> > That has a "reverting the commit fixes it", and a confirmation from Nick 
> > Bowler.
> > 
> > Eric, Carl: should I just revert that commit? Or do you have a fix?
> 
> This one is reported to have been fixed already.  Closed now.

Heh. That "fixed already" is actually the revert. Carl acked it.

> This should be fixed by commit f8ed8b4c5d30b5214f185997131b06e35f6f7113, so
> closing now.

Good, that was in yesterday's drm pull.

		Linus

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
  2010-06-09 12:39     ` Mikael Pettersson
  (?)
@ 2010-06-09 22:26     ` Rafael J. Wysocki
  2010-06-10 10:09         ` Mikael Pettersson
  -1 siblings, 1 reply; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-09 22:26 UTC (permalink / raw)
  To: Mikael Pettersson
  Cc: Linux Kernel Mailing List, Kernel Testers List, Maciej Rutecki

On Wednesday, June 09, 2010, Mikael Pettersson wrote:
> Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a summary report
> > of recent regressions.
> > 
> > The following bug entry is on the current list of known regressions
> > from 2.6.34.  Please verify if it still should be listed and let the tracking team
> > know (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=3D16161
> > Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename =
> > ... XVR-600 related?
> > Submitter	: Mikael Pettersson <mikpe@it.uu.se>
> > Date		: 2010-06-01 19:57 (8 days old)
> > Message-ID	: <19461.26166.427857.612983@pilspetsen.it.uu.se>
> > References	: http://marc.info/?l=3Dlinux-kernel&m=3D127542227511925&w=3D2
> 
> The bug is still there in 2.6.35-rc2. I haven't checked post-rc2 git snapshots.

Please test post-rc2 too.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-10 10:09         ` Mikael Pettersson
  0 siblings, 0 replies; 129+ messages in thread
From: Mikael Pettersson @ 2010-06-10 10:09 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Mikael Pettersson, Linux Kernel Mailing List,
	Kernel Testers List, Maciej Rutecki

Rafael J. Wysocki writes:
 > On Wednesday, June 09, 2010, Mikael Pettersson wrote:
 > > Rafael J. Wysocki wrote:
 > > > This message has been generated automatically as a part of a summary report
 > > > of recent regressions.
 > > > 
 > > > The following bug entry is on the current list of known regressions
 > > > from 2.6.34.  Please verify if it still should be listed and let the tracking team
 > > > know (either way).
 > > > 
 > > > 
 > > > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=3D16161
 > > > Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename =
 > > > ... XVR-600 related?
 > > > Submitter	: Mikael Pettersson <mikpe@it.uu.se>
 > > > Date		: 2010-06-01 19:57 (8 days old)
 > > > Message-ID	: <19461.26166.427857.612983@pilspetsen.it.uu.se>
 > > > References	: http://marc.info/?l=3Dlinux-kernel&m=3D127542227511925&w=3D2
 > > 
 > > The bug is still there in 2.6.35-rc2. I haven't checked post-rc2 git snapshots.
 > 
 > Please test post-rc2 too.

The bug is still there in 2.6.35-rc2-git4.

/Mikael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-10 10:09         ` Mikael Pettersson
  0 siblings, 0 replies; 129+ messages in thread
From: Mikael Pettersson @ 2010-06-10 10:09 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Mikael Pettersson, Linux Kernel Mailing List,
	Kernel Testers List, Maciej Rutecki

Rafael J. Wysocki writes:
 > On Wednesday, June 09, 2010, Mikael Pettersson wrote:
 > > Rafael J. Wysocki wrote:
 > > > This message has been generated automatically as a part of a summary report
 > > > of recent regressions.
 > > > 
 > > > The following bug entry is on the current list of known regressions
 > > > from 2.6.34.  Please verify if it still should be listed and let the tracking team
 > > > know (either way).
 > > > 
 > > > 
 > > > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=3D16161
 > > > Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename =
 > > > ... XVR-600 related?
 > > > Submitter	: Mikael Pettersson <mikpe-1zs4UD6AkMk@public.gmane.org>
 > > > Date		: 2010-06-01 19:57 (8 days old)
 > > > Message-ID	: <19461.26166.427857.612983-tgku4HJDRZih8lFjZTKsyTAV6s6igYVG@public.gmane.org>
 > > > References	: http://marc.info/?l=3Dlinux-kernel&m=3D127542227511925&w=3D2
 > > 
 > > The bug is still there in 2.6.35-rc2. I haven't checked post-rc2 git snapshots.
 > 
 > Please test post-rc2 too.

The bug is still there in 2.6.35-rc2-git4.

/Mikael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-10 15:37           ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-10 15:37 UTC (permalink / raw)
  To: Mikael Pettersson
  Cc: Linux Kernel Mailing List, Kernel Testers List, Maciej Rutecki

On Thursday, June 10, 2010, Mikael Pettersson wrote:
> Rafael J. Wysocki writes:
>  > On Wednesday, June 09, 2010, Mikael Pettersson wrote:
>  > > Rafael J. Wysocki wrote:
>  > > > This message has been generated automatically as a part of a summary report
>  > > > of recent regressions.
>  > > > 
>  > > > The following bug entry is on the current list of known regressions
>  > > > from 2.6.34.  Please verify if it still should be listed and let the tracking team
>  > > > know (either way).
>  > > > 
>  > > > 
>  > > > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=3D16161
>  > > > Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename =
>  > > > ... XVR-600 related?
>  > > > Submitter	: Mikael Pettersson <mikpe@it.uu.se>
>  > > > Date		: 2010-06-01 19:57 (8 days old)
>  > > > Message-ID	: <19461.26166.427857.612983@pilspetsen.it.uu.se>
>  > > > References	: http://marc.info/?l=3Dlinux-kernel&m=3D127542227511925&w=3D2
>  > > 
>  > > The bug is still there in 2.6.35-rc2. I haven't checked post-rc2 git snapshots.
>  > 
>  > Please test post-rc2 too.
> 
> The bug is still there in 2.6.35-rc2-git4.

Thanks for the confirmation.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-10 15:37           ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-10 15:37 UTC (permalink / raw)
  To: Mikael Pettersson
  Cc: Linux Kernel Mailing List, Kernel Testers List, Maciej Rutecki

On Thursday, June 10, 2010, Mikael Pettersson wrote:
> Rafael J. Wysocki writes:
>  > On Wednesday, June 09, 2010, Mikael Pettersson wrote:
>  > > Rafael J. Wysocki wrote:
>  > > > This message has been generated automatically as a part of a summary report
>  > > > of recent regressions.
>  > > > 
>  > > > The following bug entry is on the current list of known regressions
>  > > > from 2.6.34.  Please verify if it still should be listed and let the tracking team
>  > > > know (either way).
>  > > > 
>  > > > 
>  > > > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=3D16161
>  > > > Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename =
>  > > > ... XVR-600 related?
>  > > > Submitter	: Mikael Pettersson <mikpe-1zs4UD6AkMk@public.gmane.org>
>  > > > Date		: 2010-06-01 19:57 (8 days old)
>  > > > Message-ID	: <19461.26166.427857.612983-tgku4HJDRZih8lFjZTKsyTAV6s6igYVG@public.gmane.org>
>  > > > References	: http://marc.info/?l=3Dlinux-kernel&m=3D127542227511925&w=3D2
>  > > 
>  > > The bug is still there in 2.6.35-rc2. I haven't checked post-rc2 git snapshots.
>  > 
>  > Please test post-rc2 too.
> 
> The bug is still there in 2.6.35-rc2-git4.

Thanks for the confirmation.

Rafael

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-10 22:37     ` Alex Chiang
  0 siblings, 0 replies; 129+ messages in thread
From: Alex Chiang @ 2010-06-10 22:37 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Rafael J. Wysocki, Jesse Barnes, Linux Kernel Mailing List,
	Andrew Morton, Kernel Testers List

* Linus Torvalds <torvalds@linux-foundation.org>:
> On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
> > Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=16161
> > Subject       : [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
> > Submitter     : Mikael Pettersson <mikpe@it.uu.se>
> > Date          : 2010-06-01 19:57 (8 days old)
> > Message-ID    : <19461.26166.427857.612983@pilspetsen.it.uu.se>
> > References    : http://marc.info/?l=linux-kernel&m=127542227511925&w=2
> >
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16090
> > Subject	: sysfs: cannot create duplicate filename
> > Submitter	: Tobias <devnull@plzk.org>
> > Date		: 2010-06-01 15:59 (8 days old)
> > Handled-By	: Jesse Barnes <jbarnes@virtuousgeek.org>
> 
> These two look related. Both are related to that "slot" thing in sysfs 
> PCI, but only one of them is marked as Jesse's. Jesse?

Both related, yes.

I asked Jesse to revert the patch, so expect that to come
shortly.

Thanks,
/ac

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-10 22:37     ` Alex Chiang
  0 siblings, 0 replies; 129+ messages in thread
From: Alex Chiang @ 2010-06-10 22:37 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Rafael J. Wysocki, Jesse Barnes, Linux Kernel Mailing List,
	Andrew Morton, Kernel Testers List

* Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>:
> On Wed, 9 Jun 2010, Rafael J. Wysocki wrote:
> > Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=16161
> > Subject       : [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
> > Submitter     : Mikael Pettersson <mikpe-1zs4UD6AkMk@public.gmane.org>
> > Date          : 2010-06-01 19:57 (8 days old)
> > Message-ID    : <19461.26166.427857.612983-tgku4HJDRZih8lFjZTKsyTAV6s6igYVG@public.gmane.org>
> > References    : http://marc.info/?l=linux-kernel&m=127542227511925&w=2
> >
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16090
> > Subject	: sysfs: cannot create duplicate filename
> > Submitter	: Tobias <devnull-fBT1nhYaLZ4@public.gmane.org>
> > Date		: 2010-06-01 15:59 (8 days old)
> > Handled-By	: Jesse Barnes <jbarnes-Y1mF5jBUw70BENJcbMCuUQ@public.gmane.org>
> 
> These two look related. Both are related to that "slot" thing in sysfs 
> PCI, but only one of them is marked as Jesse's. Jesse?

Both related, yes.

I asked Jesse to revert the patch, so expect that to come
shortly.

Thanks,
/ac

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11  8:32       ` Ingo Molnar
  0 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-11  8:32 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Linus Torvalds, Rafael J. Wysocki, Carl Worth, Eric Anholt,
	Venkatesh Pallipadi, Dave Airlie, Jesse Barnes, David H?rdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

[-- Attachment #1: Type: text/plain, Size: 6309 bytes --]


* Jens Axboe <jaxboe@fusionio.com> wrote:

> On 2010-06-09 03:53, Linus Torvalds wrote:
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> >> Date		: 2010-06-05 06:15 (4 days old)
> > 
> > This seems to have been introduced by
> > 
> > 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> > 	Author: Ingo Molnar <mingo@elte.hu>
> > 	Date:   Sat Nov 8 17:05:38 2008 +0100
> > 
> > 	    sched: optimize sched_clock() a bit
> >     
> > 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> > 	    variant of __cycles_2_ns().
> >     
> > 	    Most of the time sched_clock() is called with irqs disabled already.
> > 	    The few places that call it with irqs enabled need to be updated.
> >     
> > 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> > 
> > and this seems to be one of those calling cases that need to be updated.
> > 
> > Ingo? The call trace is:
> > 
> > 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> > 	caller is native_sched_clock+0x3c/0x68
> > 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> > 	Call Trace:
> > 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> > 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> > 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> > 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> > 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> > 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> > 	[<ffffffff81215537>] __make_request+0x338/0x45b
> > 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> > 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> > 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> > 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> > 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> > 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> > 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> > 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> > 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> > 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> > 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> > 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> > 
> > (from the bugzilla thing)
> 
> This should be fixed by commit 28f4197e which was merged on friday.

Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
configs i get bad spinlock warnings during bootup:

[   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
[   28.972003] calling  b44_init+0x0/0x55 @ 1
[   28.976009] bus: 'pci': add driver b44
[   28.976374]  sda:
[   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
[   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
[   28.980000] Call Trace:
[   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
[   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
[   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
[   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
[   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
[   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
[   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
[   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
[   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
[   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
[   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
[   28.980000]  [<4132dd64>] __make_request+0x335/0x376
[   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
[   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
[   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
[   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
[   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
[   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
[   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
[   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
[   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
[   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
[   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
[   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
[   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
[   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
[   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
[   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
[   28.980000]  [<41088904>] read_cache_page+0xb/0x12
[   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
[   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
[   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
[   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
[   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
[   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
[   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
[   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
[   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
[   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
[   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
[   28.980000]  [<41332815>] add_disk+0x57/0x95
[   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
[   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
[   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
[   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
[   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
[   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
[   28.980000]  [<410433df>] kthread+0x5f/0x64
[   28.980000]  [<41043380>] ? kthread+0x0/0x64
[   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
[   29.264071] async/1 used greatest stack depth: 2336 bytes left
[   29.267020] bus: 'ssb': add driver b44
[   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
[   29.267076] calling  init_nic+0x0/0x16 @ 1

Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
attached. Reproducible on that sha1 and with that config.

Thanks,

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 73548 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35-rc2
# Fri Jun 11 12:25:08 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_PCI_QUIRKS is not set
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
CONFIG_SLOW_WORK_DEBUG=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
CONFIG_MVIAC3_2=y
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_INJECT=y
# CONFIG_VM86 is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_1G=y
CONFIG_PAGE_OFFSET=0x40000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_VERBOSE=y
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_PM_RUNTIME is not set
CONFIG_PM_OPS=y
# CONFIG_ACPI is not set
CONFIG_SFI=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCMCIA_PROBE=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
CONFIG_TCP_CONG_LP=y
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
CONFIG_IP_VS=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
# CONFIG_IP_VS_LBLC is not set
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
# CONFIG_IP_VS_NQ is not set

#
# IPVS application helper
#
# CONFIG_IP_VS_FTP is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_DCCP=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
# CONFIG_RDS_TCP is not set
CONFIG_RDS_DEBUG=y
# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
# CONFIG_ATM_BR2684 is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
# CONFIG_L2TP_ETH is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_RPS=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_L2CAP_EXT_FEATURES=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
# CONFIG_BT_BNEP_PROTO_FILTER is not set
# CONFIG_BT_CMTP is not set
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
# CONFIG_BT_ATH3K is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT_SYSFS is not set
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set

#
# CFG80211 needs to be enabled for MAC80211
#

#
# Some wireless drivers require a rate control algorithm
#
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
# CONFIG_PNPACPI is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_BLK_DEV_HD=y
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=y
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=y
# CONFIG_HP_ILO is not set
CONFIG_ISL29003=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=y
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=y
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_DTC3280=y
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_GENERIC_NCR5380=y
CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_NCR53C406A=y
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_PAS16=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
# CONFIG_SCSI_T128 is not set
CONFIG_SCSI_U14_34F=y
# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
# CONFIG_SCSI_ULTRASTOR is not set
CONFIG_SCSI_NSP32=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_SRP=y
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
# CONFIG_PATA_CMD64X is not set
CONFIG_PATA_CS5520=y
# CONFIG_PATA_CS5530 is not set
CONFIG_PATA_CS5535=y
# CONFIG_PATA_CS5536 is not set
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
# CONFIG_PATA_HPT366 is not set
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
# CONFIG_PATA_NETCELL is not set
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SC1200=y
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_QDI=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_WINBOND_VLB=y

#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MULTICORE_RAID456=y
CONFIG_MD_RAID6_PQ=y
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
# CONFIG_BLK_DEV_DM is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# The newer stack is recommended.
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
# CONFIG_IEEE1394 is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
# CONFIG_I2O_BUS is not set
# CONFIG_I2O_BLOCK is not set
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_EQUALIZER=y
CONFIG_TUN=y
CONFIG_VETH=y
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_LANCE=y
CONFIG_NET_VENDOR_SMC=y
# CONFIG_WD80x3 is not set
CONFIG_ULTRA=y
# CONFIG_SMC9194 is not set
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=y
CONFIG_NI65=y
CONFIG_DNET=y
# CONFIG_NET_TULIP is not set
CONFIG_AT1700=y
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_CS89x0=y
CONFIG_E100=y
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
CONFIG_SIS900=y
CONFIG_EPIC100=y
# CONFIG_SMSC9420 is not set
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
# CONFIG_TLAN is not set
CONFIG_KS8842=y
# CONFIG_KS8851_MLL is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_SC92031=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
# CONFIG_DE600 is not set
CONFIG_DE620=y
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IP1000=y
# CONFIG_IGB is not set
CONFIG_IGBVF=y
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_R8169_VLAN is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_CNIC=y
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=y
CONFIG_ATL1E=y
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4_DEPENDS=y
CONFIG_CHELSIO_T4=y
CONFIG_ENIC=y
# CONFIG_IXGBE is not set
CONFIG_IXGBEVF=y
CONFIG_IXGB=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_MYRI10GE=y
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
# CONFIG_MLX4_DEBUG is not set
CONFIG_TEHUTI=y
CONFIG_BNX2X=y
CONFIG_QLCNIC=y
CONFIG_QLGE=y
CONFIG_SFC=y
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMTR is not set
CONFIG_IBMOL=y
CONFIG_IBMLS=y
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
CONFIG_SMCTR=y
CONFIG_WLAN=y
CONFIG_AIRO=y
# CONFIG_ATMEL is not set
CONFIG_PRISM54=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set

#
# WiMAX Wireless Broadband devices
#

#
# Enable MMC support to see WiMAX SDIO drivers
#
# CONFIG_WIMAX_I2400M_USB is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=y
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_HSO is not set
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_CDC_PHONET=y
CONFIG_USB_IPHETH=y
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=y
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
CONFIG_ATM_HORIZON=y
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=y
CONFIG_IEEE802154_DRIVERS=y
# CONFIG_IEEE802154_FAKEHARD is not set

#
# CAIF transport drivers
#
# CONFIG_CAIF_TTY is not set
# CONFIG_FDDI is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=y
# CONFIG_PPPOATM is not set
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VMXNET3=y
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=y
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=y
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=y

#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
CONFIG_CAPI_EICON=y
# CONFIG_ISDN_DIVAS is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_DUMMYLL is not set
# CONFIG_GIGASET_BASE is not set
CONFIG_GIGASET_M105=y
# CONFIG_GIGASET_M101 is not set
CONFIG_GIGASET_DEBUG=y
# CONFIG_MISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_KBTAB=y
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879=y
# CONFIG_TOUCHSCREEN_DA9034 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=y
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_MCS5000=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_HTCPEN is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
CONFIG_TOUCHSCREEN_USB_3M=y
# CONFIG_TOUCHSCREEN_USB_ITM is not set
CONFIG_TOUCHSCREEN_USB_ETURBO=y
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
# CONFIG_TOUCHSCREEN_USB_ETT_TC5UH is not set
CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_APANEL=y
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_WINBOND_CIR=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_WM831X_ON=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_ISI=y
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=y
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_DTLK=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
# CONFIG_MWAVE is not set
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_CS5535_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
CONFIG_SCx200_I2C=y
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO expanders:
#
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_SCH=y

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=y
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TC35892=y
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8994=y
CONFIG_GPIO_ADP5588=y

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_TIMBERDALE is not set
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders:
#

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
# CONFIG_WM831X_POWER is not set
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_OLPC is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_DA9030 is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_HDAPS is not set
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_SENSORS_APPLESMC=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=y
# CONFIG_ALIM7101_WDT is not set
CONFIG_GEODE_WDT=y
CONFIG_SC520_WDT=y
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=y
# CONFIG_SC1200_WDT is not set
CONFIG_SCx200_WDT=y
# CONFIG_PC87413_WDT is not set
CONFIG_60XX_WDT=y
# CONFIG_SBC8360_WDT is not set
CONFIG_SBC7240_WDT=y
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_W83627HF_WDT=y
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y

#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=y
CONFIG_MIXCOMWD=y
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
# CONFIG_TWL4030_CORE is not set
CONFIG_MFD_TC35892=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
# CONFIG_AB3550_CORE is not set
CONFIG_MFD_TIMBERDALE=y
CONFIG_LPC_SCH=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_BQ24022=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_WM831X=y
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_KMS is not set
CONFIG_DRM_MGA=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX1=y
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_DA903X=y
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_WM831X is not set
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_88PM860X=y

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_VMIDI=y
# CONFIG_SOUND_TRIX is not set
CONFIG_SOUND_MSS=y
# CONFIG_SOUND_MPU401 is not set
CONFIG_SOUND_PAS=y
CONFIG_PAS_JOYSTICK=y
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
CONFIG_SOUND_YM3812=y
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# Special HID drivers
#
CONFIG_HID_3M_PCT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CANDO is not set
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EGALAX=y
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MOSART=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_FB is not set
CONFIG_HID_PICOLCD_BACKLIGHT=y
# CONFIG_HID_PICOLCD_LCD is not set
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_QUANTA=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_ROCCAT_KONE=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_STANTUM=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_WACOM=y
# CONFIG_HID_WACOM_POWER_SUPPLY is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_FUNSOFT=y
CONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_MOTOROLA=y
CONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=y
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=y
CONFIG_USB_SERIAL_ZIO=y
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_WLP=y
CONFIG_UWB_I1480U=y
CONFIG_UWB_I1480U_WLP=y
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_NET48XX is not set
# CONFIG_LEDS_WRAP is not set
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_DA903X is not set
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_AMSO1100 is not set
CONFIG_INFINIBAND_CXGB3=y
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=y
CONFIG_MLX4_INFINIBAND=y
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_MAX8925 is not set
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_WM831X=y

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_DELL_LAPTOP=y

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_EXT4_DEBUG=y
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=y
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTRS is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
# CONFIG_ACORN_PARTITION_RISCIX is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_LKDTM is not set
CONFIG_CPU_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_KSYM_TRACER=y
# CONFIG_PROFILE_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
CONFIG_WORKQUEUE_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_EVENT_TRACE_TEST_SYSCALLS is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
# CONFIG_KDB_KEYBOARD is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="tomoyo"
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
# CONFIG_CRYPTO_DEV_GEODE is not set
CONFIG_CRYPTO_DEV_HIFN_795X=y
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_NLATTR=y

[-- Attachment #3: boot.log --]
[-- Type: text/plain, Size: 547960 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35-rc2-00131-g7908a9e (mingo@sirius) (gcc version 4.4.4 20100514 (Red Hat 4.4.4-3) (GCC) ) #8184 SMP Fri Jun 11 12:26:19 CEST 2010
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.3 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 02c00000
[    0.000000] Scan SMP from 40000000 for 1024 bytes.
[    0.000000] Scan SMP from 4009fc00 for 1024 bytes.
[    0.000000] Scan SMP from 400f0000 for 65536 bytes.
[    0.000000] found SMP MP-table at [400f5680] f5680
[    0.000000]   mpc: f1400-f152c
[    0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
[    0.000000]  0000000000 - 003fff0000 page 4k
[    0.000000] kernel direct mapping tables up to 3fff0000 @ 100000-204000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 1023MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 3fff0000
[    0.000000]   low ram: 0 - 3fff0000
[    0.000000] early_res array is doubled to 64 at [11080 - 1187f]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0003fff0
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262015
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 2016 pages used for memmap
[    0.000000]   Normal zone: 256016 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000]   mpc: f1400-f152c
[    0.000000] MPTABLE: OEM ID: OEM00000
[    0.000000] MPTABLE: Product ID: PROD00000000
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] Processor #1
[    0.000000] Bus #0 is PCI   
[    0.000000] Bus #1 is PCI   
[    0.000000] Bus #2 is PCI   
[    0.000000] Bus #3 is PCI   
[    0.000000] Bus #4 is PCI   
[    0.000000] Bus #5 is PCI   
[    0.000000] Bus #6 is ISA   
[    0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 1-24
[    0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b
[    0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03
[    0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
[    0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b
[    0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
[    0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
[    0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
[    0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
[    0.000000] Processors: 2
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] nr_irqs_gsi: 41
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 15 pages/cpu @43000000 s45272 r0 d16168 u2097152
[    0.000000] pcpu-alloc: s45272 r0 d16168 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
[    0.000000] Kernel command line: root=/dev/sda1 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 3
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Subtract (47 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0001000000 - 0002619de0]   TEXT DATA BSS
[    0.000000]   #3 [000261a000 - 0002625149]             BRK
[    0.000000]   #4 [00000f5690 - 0000100000]   BIOS reserved
[    0.000000]   #5 [00000f5680 - 00000f5690]    MP-table mpf
[    0.000000]   #6 [000009f800 - 00000f1400]   BIOS reserved
[    0.000000]   #7 [00000f152c - 00000f5680]   BIOS reserved
[    0.000000]   #8 [00000f1400 - 00000f152c]    MP-table mpc
[    0.000000]   #9 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #10 [0000100000 - 00001f7000]         PGTABLE
[    0.000000]   #11 [0002626000 - 0002627000]         BOOTMEM
[    0.000000]   #12 [0000011000 - 0000011080]         BOOTMEM
[    0.000000]   #13 [0002627000 - 00026a7000]         BOOTMEM
[    0.000000]   #14 [00026a7000 - 0002727000]         BOOTMEM
[    0.000000]   #15 [0002727000 - 00027a7000]         BOOTMEM
[    0.000000]   #16 [00027a7000 - 0002827000]         BOOTMEM
[    0.000000]   #17 [0002827000 - 00028a7000]         BOOTMEM
[    0.000000]   #18 [00028a7000 - 0002927000]         BOOTMEM
[    0.000000]   #19 [0002927000 - 00029a7000]         BOOTMEM
[    0.000000]   #20 [00029a7000 - 0002a27000]         BOOTMEM
[    0.000000]   #21 [0002a27000 - 0002aa7000]         BOOTMEM
[    0.000000]   #22 [0002aa7000 - 0002b27000]         BOOTMEM
[    0.000000]   #23 [0002b27000 - 0002ba7000]         BOOTMEM
[    0.000000]   #24 [0002ba7000 - 0002c27000]         BOOTMEM
[    0.000000]   #25 [0002c27000 - 0002ca7000]         BOOTMEM
[    0.000000]   #26 [0002ca7000 - 0002d27000]         BOOTMEM
[    0.000000]   #27 [0002d27000 - 0002da7000]         BOOTMEM
[    0.000000]   #28 [0002da7000 - 0002e27000]         BOOTMEM
[    0.000000]   #29 [0002e27000 - 0002e3f000]         BOOTMEM
[    0.000000]   #30 [0002e3f000 - 0002e57000]         BOOTMEM
[    0.000000]   #31 [0002619de0 - 0002619e07]         BOOTMEM
[    0.000000]   #32 [0002619e20 - 0002619f1c]         BOOTMEM
[    0.000000]   #33 [0002619f20 - 0002619f30]         BOOTMEM
[    0.000000]   #34 [0002619f40 - 0002619ff5]         BOOTMEM
[    0.000000]   #35 [0002625160 - 0002625215]         BOOTMEM
[    0.000000]   #36 [0003000000 - 000300f000]         BOOTMEM
[    0.000000]   #37 [0003200000 - 000320f000]         BOOTMEM
[    0.000000]   #38 [0002625220 - 0002625224]         BOOTMEM
[    0.000000]   #39 [0002625240 - 0002625244]         BOOTMEM
[    0.000000]   #40 [0002625260 - 0002625268]         BOOTMEM
[    0.000000]   #41 [0002625280 - 0002625288]         BOOTMEM
[    0.000000]   #42 [00026252a0 - 0002625348]         BOOTMEM
[    0.000000]   #43 [0002625360 - 00026253c8]         BOOTMEM
[    0.000000]   #44 [0002e57000 - 0002e5b000]         BOOTMEM
[    0.000000]   #45 [0002e5b000 - 0002edb000]         BOOTMEM
[    0.000000]   #46 [0002edb000 - 0002f1b000]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 1015092k/1048512k available (11925k kernel code, 32968k reserved, 7341k data, 656k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffa98000 - 0xfffff000   (5532 kB)
[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.000000]     vmalloc : 0x807f0000 - 0xff3fe000   (2028 MB)
[    0.000000]     lowmem  : 0x40000000 - 0x7fff0000   (1023 MB)
[    0.000000]       .init : 0x422d1000 - 0x42375000   ( 656 kB)
[    0.000000]       .data : 0x41ba5570 - 0x422d0b8c   (7341 kB)
[    0.000000]       .text : 0x41000000 - 0x41ba5570   (11925 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU debugfs-based tracing is enabled.
[    0.000000] 	Hierarchical RCU autobalancing is disabled.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:1280
[    0.000000] CPU 0 irqstacks, hard=43000000 soft=43001000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.000000] ------------------------
[    0.000000] | Locking API testsuite:
[    0.000000] ----------------------------------------------------------------------------
[    0.000000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                     double unlock:  ok  |  ok  |failed|  ok  |failed|failed|
[    0.000000]                   initialize held:failed|failed|failed|failed|failed|failed|
[    0.000000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]               recursive read-lock:             |  ok  |             |failed|
[    0.000000]            recursive read-lock #2:             |  ok  |             |failed|
[    0.000000]             mixed read-write-lock:             |failed|             |failed|
[    0.000000]             mixed write-read-lock:             |failed|             |failed|
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       hard-irq read-recursion/123:  ok  |
[    0.000000]       soft-irq read-recursion/123:  ok  |
[    0.000000]       hard-irq read-recursion/132:  ok  |
[    0.000000]       soft-irq read-recursion/132:  ok  |
[    0.000000]       hard-irq read-recursion/213:  ok  |
[    0.000000]       soft-irq read-recursion/213:  ok  |
[    0.000000]       hard-irq read-recursion/231:  ok  |
[    0.000000]       soft-irq read-recursion/231:  ok  |
[    0.000000]       hard-irq read-recursion/312:  ok  |
[    0.000000]       soft-irq read-recursion/312:  ok  |
[    0.000000]       hard-irq read-recursion/321:  ok  |
[    0.000000]       soft-irq read-recursion/321:  ok  |
[    0.000000] --------------------------------------------------------
[    0.000000] 142 out of 218 testcases failed, as expected. |
[    0.000000] ----------------------------------------------------
[    0.000000] ODEBUG: 8 of 8 active objects replaced
[    0.000000] ODEBUG: selftest passed
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2010.275 MHz processor.
[    0.012005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.55 BogoMIPS (lpj=8041100)
[    0.020003] pid_max: default: 32768 minimum: 301
[    0.024074] Security Framework initialized
[    0.028012] TOMOYO Linux initialized
[    0.032161] Mount-cache hash table entries: 512
[    0.036399] Initializing cgroup subsys debug
[    0.040004] Initializing cgroup subsys ns
[    0.044004] Initializing cgroup subsys cpuacct
[    0.048006] Initializing cgroup subsys freezer
[    0.052003] Initializing cgroup subsys blkio
[    0.056068] CPU: Physical Processor ID: 0
[    0.060002] CPU: Processor Core ID: 0
[    0.064003] mce: CPU supports 5 MCE banks
[    0.068017] Performance Events: AMD PMU driver.
[    0.073530] ... version:                0
[    0.076002] ... bit width:              48
[    0.080002] ... generic registers:      4
[    0.084002] ... value mask:             0000ffffffffffff
[    0.088002] ... max period:             00007fffffffffff
[    0.092002] ... fixed-purpose events:   0
[    0.096002] ... event mask:             000000000000000f
[    0.104904] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.108007] enabled ExtINT on CPU#0
[    0.112048] ExtINT not setup in hardware but reported by MP table
[    0.120028] ENABLING IO-APIC IRQs
[    0.123336] init IO_APIC IRQs
[    0.124002]  2-0 (apicid-pin) not connected
[    0.128007] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[    0.132008] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[    0.136007] IOAPIC[0]: Set routing entry (2-3 -> 0x29 -> IRQ 29 Mode:1 Active:1)
[    0.140000] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-5 -> 0x41 -> IRQ 31 Mode:1 Active:1)
[    0.140000] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-11 -> 0x49 -> IRQ 37 Mode:1 Active:1)
[    0.140000] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[    0.140000]  2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
[    0.140000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.140000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.140000] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.140000] ..... (found apic 0 pin 0) ...
[    0.182315] ....... works.
[    0.184001] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[    0.192002] Using local APIC timer interrupts.
[    0.192003] calibrating APIC timer ...
[    0.200000] ... lapic delta = 1256509
[    0.200000] ..... delta 1256509
[    0.200000] ..... mult: 53963277
[    0.200000] ..... calibration result: 804165
[    0.200000] ..... CPU clock speed is 2010.1659 MHz.
[    0.200000] ..... host bus clock speed is 201.0165 MHz.
[    0.200000] ... verify APIC timer
[    0.311691] ... jiffies delta = 25
[    0.312001] ... jiffies result ok
[    0.316017] calling  migration_init+0x0/0x3c @ 1
[    0.320005] initcall migration_init+0x0/0x3c returned 0 after 0 usecs
[    0.324003] calling  spawn_ksoftirqd+0x0/0x3c @ 1
[    0.328051] initcall spawn_ksoftirqd+0x0/0x3c returned 0 after 0 usecs
[    0.332005] calling  init_call_single_data+0x0/0x96 @ 1
[    0.336005] initcall init_call_single_data+0x0/0x96 returned 0 after 0 usecs
[    0.340004] calling  cpu_stop_init+0x0/0xab @ 1
[    0.344054] initcall cpu_stop_init+0x0/0xab returned 0 after 0 usecs
[    0.348004] calling  spawn_softlockup_task+0x0/0x65 @ 1
[    0.352045] initcall spawn_softlockup_task+0x0/0x65 returned 0 after 0 usecs
[    0.356005] calling  tracer_alloc_buffers+0x0/0x172 @ 1
[    0.360138] Testing tracer nop: PASSED
[    0.364757] initcall tracer_alloc_buffers+0x0/0x172 returned 0 after 3906 usecs
[    0.368003] calling  init_trace_printk+0x0/0x7 @ 1
[    0.372003] initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs
[    0.376003] calling  trace_workqueue_early_init+0x0/0x121 @ 1
[    0.380176] initcall trace_workqueue_early_init+0x0/0x121 returned 0 after 0 usecs
[    0.384302] CPU 1 irqstacks, hard=43200000 soft=43201000
[    0.388007] Booting Node   0, Processors  #1 Ok.
[    0.016000] Initializing CPU#1
[    0.016000] masked ExtINT on CPU#1
[    0.484093] Brought up 2 CPUs
[    0.488003] Total of 2 processors activated (8041.41 BogoMIPS).
[    0.496153] device: 'platform': device_add
[    0.500016] PM: Adding info for No Bus:platform
[    0.504094] bus: 'platform': registered
[    0.508006] Registering sysdev class 'cpu'
[    0.512048] Registering sysdev class 'memory'
[    0.516049] Registering sys device of class 'memory'
[    0.520006] Registering sys device 'memory0'
[    0.524045] Registering sys device of class 'memory'
[    0.528005] Registering sys device 'memory1'
[    0.532043] Registering sys device of class 'memory'
[    0.540005] Registering sys device 'memory2'
[    0.544043] Registering sys device of class 'memory'
[    0.548005] Registering sys device 'memory3'
[    0.552052] Registering sys device of class 'memory'
[    0.556005] Registering sys device 'memory4'
[    0.560044] Registering sys device of class 'memory'
[    0.568005] Registering sys device 'memory5'
[    0.572043] Registering sys device of class 'memory'
[    0.576005] Registering sys device 'memory6'
[    0.580043] Registering sys device of class 'memory'
[    0.584005] Registering sys device 'memory7'
[    0.588043] Registering sys device of class 'memory'
[    0.596005] Registering sys device 'memory8'
[    0.600043] Registering sys device of class 'memory'
[    0.604005] Registering sys device 'memory9'
[    0.608043] Registering sys device of class 'memory'
[    0.612005] Registering sys device 'memory10'
[    0.616043] Registering sys device of class 'memory'
[    0.624005] Registering sys device 'memory11'
[    0.628052] Registering sys device of class 'memory'
[    0.632005] Registering sys device 'memory12'
[    0.636044] Registering sys device of class 'memory'
[    0.640005] Registering sys device 'memory13'
[    0.644043] Registering sys device of class 'memory'
[    0.652005] Registering sys device 'memory14'
[    0.656043] Registering sys device of class 'memory'
[    0.660005] Registering sys device 'memory15'
[    0.664509] calling  init_mmap_min_addr+0x0/0x11 @ 1
[    0.668004] initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
[    0.676005] calling  init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[    0.684006] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[    0.692004] calling  net_ns_init+0x0/0x1a8 @ 1
[    0.696006] initcall net_ns_init+0x0/0x1a8 returned 0 after 0 usecs
[    0.704004] calling  e820_mark_nvs_memory+0x0/0x31 @ 1
[    0.708006] initcall e820_mark_nvs_memory+0x0/0x31 returned 0 after 0 usecs
[    0.716003] calling  cpufreq_tsc+0x0/0x25 @ 1
[    0.720004] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
[    0.724003] calling  pci_reboot_init+0x0/0x11 @ 1
[    0.728005] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.736003] calling  reboot_init+0x0/0x11 @ 1
[    0.740010] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.748003] calling  init_lapic_sysfs+0x0/0x28 @ 1
[    0.752002] Registering sysdev class 'lapic'
[    0.756042] Registering sys device of class 'lapic'
[    0.760005] Registering sys device 'lapic0'
[    0.764039] initcall init_lapic_sysfs+0x0/0x28 returned 0 after 11718 usecs
[    0.772004] calling  init_smp_flush+0x0/0x2a @ 1
[    0.776003] initcall init_smp_flush+0x0/0x2a returned 0 after 0 usecs
[    0.784004] calling  alloc_frozen_cpus+0x0/0x7 @ 1
[    0.788003] initcall alloc_frozen_cpus+0x0/0x7 returned 0 after 0 usecs
[    0.796003] calling  ksysfs_init+0x0/0x74 @ 1
[    0.800017] initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs
[    0.804003] calling  async_init+0x0/0x3d @ 1
[    0.808041] initcall async_init+0x0/0x3d returned 0 after 0 usecs
[    0.812004] calling  init_jiffies_clocksource+0x0/0xf @ 1
[    0.816006] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[    0.820003] calling  pm_init+0x0/0x2d @ 1
[    0.824019] initcall pm_init+0x0/0x2d returned 0 after 0 usecs
[    0.828003] calling  pm_disk_init+0x0/0x14 @ 1
[    0.832007] initcall pm_disk_init+0x0/0x14 returned 0 after 0 usecs
[    0.836004] calling  swsusp_header_init+0x0/0x26 @ 1
[    0.840005] initcall swsusp_header_init+0x0/0x26 returned 0 after 0 usecs
[    0.844003] calling  init_ftrace_syscalls+0x0/0x96 @ 1
[    0.852382] initcall init_ftrace_syscalls+0x0/0x96 returned 0 after 3906 usecs
[    0.856003] calling  init_hw_breakpoint+0x0/0xee @ 1
[    0.860040] initcall init_hw_breakpoint+0x0/0xee returned 0 after 0 usecs
[    0.864003] calling  init_zero_pfn+0x0/0x41 @ 1
[    0.868003] initcall init_zero_pfn+0x0/0x41 returned 0 after 0 usecs
[    0.872003] calling  filelock_init+0x0/0x27 @ 1
[    0.876009] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs
[    0.880003] calling  init_script_binfmt+0x0/0x11 @ 1
[    0.884004] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.888003] calling  init_elf_binfmt+0x0/0x11 @ 1
[    0.892003] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.896004] calling  debugfs_init+0x0/0x4a @ 1
[    0.900012] initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs
[    0.904003] calling  securityfs_init+0x0/0x41 @ 1
[    0.908017] initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs
[    0.912004] calling  calibrate_xor_blocks+0x0/0x139 @ 1
[    0.916004] xor: automatically using best checksumming function: pIII_sse
[    0.940003]    pIII_sse  :  6085.000 MB/sec
[    0.944002] xor: using function: pIII_sse (6085.000 MB/sec)
[    0.948008] initcall calibrate_xor_blocks+0x0/0x139 returned 0 after 31250 usecs
[    0.952003] calling  random32_init+0x0/0xca @ 1
[    0.956004] initcall random32_init+0x0/0xca returned 0 after 0 usecs
[    0.960003] calling  test_atomic64+0x0/0x2e0 @ 1
[    0.964004] atomic64 test passed for i386+ platform with CX8 and with SSE
[    0.968003] initcall test_atomic64+0x0/0x2e0 returned 0 after 3906 usecs
[    0.972003] calling  sfi_sysfs_init+0x0/0xba @ 1
[    0.976003] initcall sfi_sysfs_init+0x0/0xba returned 0 after 0 usecs
[    0.980003] calling  regulator_init+0x0/0x23 @ 1
[    0.984002] regulator: core version 0.5
[    0.988002] device class 'regulator': registering
[    0.992052] initcall regulator_init+0x0/0x23 returned 0 after 7812 usecs
[    0.996006] calling  early_resume_init+0x0/0x169 @ 1
[    1.000020] Time: 21:24:41  Date: 06/11/10
[    1.004004] initcall early_resume_init+0x0/0x169 returned 0 after 3906 usecs
[    1.008004] calling  cpufreq_core_init+0x0/0x8c @ 1
[    1.012009] initcall cpufreq_core_init+0x0/0x8c returned 0 after 0 usecs
[    1.016003] calling  cpuidle_init+0x0/0x32 @ 1
[    1.020009] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs
[    1.024004] calling  sock_init+0x0/0x51 @ 1
[    1.028068] initcall sock_init+0x0/0x51 returned 0 after 0 usecs
[    1.032004] calling  netpoll_init+0x0/0x39 @ 1
[    1.036003] initcall netpoll_init+0x0/0x39 returned 0 after 0 usecs
[    1.040003] calling  netlink_proto_init+0x0/0x159 @ 1
[    1.044028] NET: Registered protocol family 16
[    1.048029] initcall netlink_proto_init+0x0/0x159 returned 0 after 3906 usecs
[    1.052003] calling  olpc_init+0x0/0x14b @ 1
[    1.056003] initcall olpc_init+0x0/0x14b returned 0 after 0 usecs
[    1.060003] calling  bdi_class_init+0x0/0x40 @ 1
[    1.064004] device class 'bdi': registering
[    1.068071] initcall bdi_class_init+0x0/0x40 returned 0 after 3906 usecs
[    1.072003] calling  kobject_uevent_init+0x0/0x1e @ 1
[    1.076013] initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs
[    1.080003] calling  gpiolib_sysfs_init+0x0/0x7e @ 1
[    1.084002] device class 'gpio': registering
[    1.088067] initcall gpiolib_sysfs_init+0x0/0x7e returned 0 after 3906 usecs
[    1.092003] calling  pcibus_class_init+0x0/0x14 @ 1
[    1.096002] device class 'pci_bus': registering
[    1.100051] initcall pcibus_class_init+0x0/0x14 returned 0 after 3906 usecs
[    1.104003] calling  pci_driver_init+0x0/0xf @ 1
[    1.108062] bus: 'pci': registered
[    1.111466] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
[    1.112004] calling  lcd_class_init+0x0/0x3f @ 1
[    1.116002] device class 'lcd': registering
[    1.120062] initcall lcd_class_init+0x0/0x3f returned 0 after 3906 usecs
[    1.124003] calling  backlight_class_init+0x0/0x4d @ 1
[    1.128003] device class 'backlight': registering
[    1.132052] initcall backlight_class_init+0x0/0x4d returned 0 after 3906 usecs
[    1.136003] calling  video_output_class_init+0x0/0x14 @ 1
[    1.140002] device class 'video_output': registering
[    1.144051] initcall video_output_class_init+0x0/0x14 returned 0 after 3906 usecs
[    1.148004] calling  tty_class_init+0x0/0x2f @ 1
[    1.152002] device class 'tty': registering
[    1.156050] initcall tty_class_init+0x0/0x2f returned 0 after 3906 usecs
[    1.160004] calling  vtconsole_class_init+0x0/0xa1 @ 1
[    1.164002] device class 'vtconsole': registering
[    1.168055] device: 'vtcon0': device_add
[    1.172012] PM: Adding info for No Bus:vtcon0
[    1.176053] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 11718 usecs
[    1.180003] calling  i2c_init+0x0/0x35 @ 1
[    1.184075] bus: 'i2c': registered
[    1.188003] bus: 'i2c': add driver dummy
[    1.192054] i2c-core: driver [dummy] registered
[    1.196004] initcall i2c_init+0x0/0x35 returned 0 after 11718 usecs
[    1.200003] calling  amd_postcore_init+0x0/0x85 @ 1
[    1.204006] node 0 link 0: io port [1000, fffff]
[    1.208003] TOM: 0000000040000000 aka 1024M
[    1.212003] node 0 link 0: mmio [e0000000, efffffff]
[    1.216192] node 0 link 0: mmio [feb00000, fec0ffff]
[    1.224003] node 0 link 0: mmio [a0000, bffff]
[    1.228191] node 0 link 0: mmio [40000000, fed3ffff]
[    1.232191] bus: [00, ff] on node 0 link 0
[    1.236003] bus: 00 index 0 [io  0x0000-0xffff]
[    1.240002] bus: 00 index 1 [mem 0x40000000-0xffffffff]
[    1.244002] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff]
[    1.248002] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[    1.252003] initcall amd_postcore_init+0x0/0x85 returned 0 after 46875 usecs
[    1.256004] calling  arch_kdebugfs_init+0x0/0x1e @ 1
[    1.260009] initcall arch_kdebugfs_init+0x0/0x1e returned 0 after 0 usecs
[    1.264003] calling  init_pit_clocksource+0x0/0x9e @ 1
[    1.268003] initcall init_pit_clocksource+0x0/0x9e returned 0 after 0 usecs
[    1.272003] calling  mtrr_if_init+0x0/0x44 @ 1
[    1.276009] initcall mtrr_if_init+0x0/0x44 returned 0 after 0 usecs
[    1.280003] calling  kdump_buf_page_init+0x0/0x76 @ 1
[    1.284021] initcall kdump_buf_page_init+0x0/0x76 returned 0 after 0 usecs
[    1.288003] calling  pci_arch_init+0x0/0x42 @ 1
[    1.300444] PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5
[    1.304013] initcall pci_arch_init+0x0/0x42 returned 0 after 11718 usecs
[    1.308003] calling  topology_init+0x0/0x50 @ 1
[    1.312002] Registering sys device of class 'cpu'
[    1.316008] Registering sys device 'cpu0'
[    1.320050] Registering sys device of class 'cpu'
[    1.324005] Registering sys device 'cpu1'
[    1.328049] initcall topology_init+0x0/0x50 returned 0 after 15625 usecs
[    1.332003] calling  mtrr_init_finialize+0x0/0x35 @ 1
[    1.336004] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
[    1.340003] calling  param_sysfs_init+0x0/0x2c5 @ 1
[    1.380209] initcall param_sysfs_init+0x0/0x2c5 returned 0 after 35156 usecs
[    1.384004] calling  pm_sysrq_init+0x0/0x16 @ 1
[    1.388003] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
[    1.392003] calling  init_slow_work+0x0/0x51 @ 1
[    1.396021] initcall init_slow_work+0x0/0x51 returned 0 after 0 usecs
[    1.400003] calling  default_bdi_init+0x0/0x8c @ 1
[    1.404044] device: 'default': device_add
[    1.408018] PM: Adding info for No Bus:default
[    1.412064] initcall default_bdi_init+0x0/0x8c returned 0 after 7812 usecs
[    1.416004] calling  init_bio+0x0/0xf2 @ 1
[    1.420051] bio: create slab <bio-0> at 0
[    1.424138] initcall init_bio+0x0/0xf2 returned 0 after 3906 usecs
[    1.432004] calling  fsnotify_init+0x0/0xf @ 1
[    1.436008] initcall fsnotify_init+0x0/0xf returned 0 after 0 usecs
[    1.440003] calling  fsnotify_notification_init+0x0/0x5b @ 1
[    1.448012] initcall fsnotify_notification_init+0x0/0x5b returned 0 after 0 usecs
[    1.456003] calling  cryptomgr_init+0x0/0xf @ 1
[    1.460003] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
[    1.464003] calling  blk_settings_init+0x0/0x1d @ 1
[    1.468003] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
[    1.476003] calling  blk_ioc_init+0x0/0x24 @ 1
[    1.480014] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs
[    1.488005] calling  blk_softirq_init+0x0/0x73 @ 1
[    1.492004] initcall blk_softirq_init+0x0/0x73 returned 0 after 0 usecs
[    1.500003] calling  blk_iopoll_setup+0x0/0x73 @ 1
[    1.504004] initcall blk_iopoll_setup+0x0/0x73 returned 0 after 0 usecs
[    1.508003] calling  genhd_device_init+0x0/0x50 @ 1
[    1.516002] device class 'block': registering
[    1.520051] initcall genhd_device_init+0x0/0x50 returned 0 after 3906 usecs
[    1.528003] calling  blk_dev_integrity_init+0x0/0x24 @ 1
[    1.532008] initcall blk_dev_integrity_init+0x0/0x24 returned 0 after 0 usecs
[    1.540003] calling  gpiolib_debugfs_init+0x0/0x1f @ 1
[    1.544027] initcall gpiolib_debugfs_init+0x0/0x1f returned 0 after 0 usecs
[    1.552003] calling  max7300_init+0x0/0x11 @ 1
[    1.556003] bus: 'i2c': add driver max7300
[    1.560067] i2c-core: driver [max7300] registered
[    1.564004] initcall max7300_init+0x0/0x11 returned 0 after 7812 usecs
[    1.572003] calling  pca953x_init+0x0/0x11 @ 1
[    1.576002] bus: 'i2c': add driver pca953x
[    1.580052] i2c-core: driver [pca953x] registered
[    1.584004] initcall pca953x_init+0x0/0x11 returned 0 after 7812 usecs
[    1.592003] calling  tc35892_gpio_init+0x0/0xf @ 1
[    1.596002] bus: 'platform': add driver tc35892-gpio
[    1.600054] initcall tc35892_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    1.608003] calling  wm8994_gpio_init+0x0/0xf @ 1
[    1.612002] bus: 'platform': add driver wm8994-gpio
[    1.616054] initcall wm8994_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    1.624005] calling  pci_slot_init+0x0/0x3b @ 1
[    1.628009] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs
[    1.636003] calling  fbmem_init+0x0/0x80 @ 1
[    1.640013] device class 'graphics': registering
[    1.644053] initcall fbmem_init+0x0/0x80 returned 0 after 3906 usecs
[    1.648003] calling  pnp_init+0x0/0xf @ 1
[    1.652060] bus: 'pnp': registered
[    1.656003] initcall pnp_init+0x0/0xf returned 0 after 3906 usecs
[    1.664003] calling  max1586_pmic_init+0x0/0x11 @ 1
[    1.668002] bus: 'i2c': add driver max1586
[    1.672066] i2c-core: driver [max1586] registered
[    1.676004] initcall max1586_pmic_init+0x0/0x11 returned 0 after 7812 usecs
[    1.684003] calling  max8660_init+0x0/0x11 @ 1
[    1.688002] bus: 'i2c': add driver max8660
[    1.692052] i2c-core: driver [max8660] registered
[    1.696004] initcall max8660_init+0x0/0x11 returned 0 after 7812 usecs
[    1.704003] calling  max8925_regulator_init+0x0/0xf @ 1
[    1.708002] bus: 'platform': add driver max8925-regulator
[    1.716054] initcall max8925_regulator_init+0x0/0xf returned 0 after 7812 usecs
[    1.720003] calling  wm831x_dcdc_init+0x0/0x73 @ 1
[    1.728002] bus: 'platform': add driver wm831x-buckv
[    1.732052] bus: 'platform': add driver wm831x-buckp
[    1.736062] bus: 'platform': add driver wm831x-boostp
[    1.740053] bus: 'platform': add driver wm831x-epe
[    1.748055] initcall wm831x_dcdc_init+0x0/0x73 returned 0 after 19531 usecs
[    1.752003] calling  wm831x_isink_init+0x0/0x28 @ 1
[    1.760002] bus: 'platform': add driver wm831x-isink
[    1.764054] initcall wm831x_isink_init+0x0/0x28 returned 0 after 3906 usecs
[    1.772003] calling  wm831x_ldo_init+0x0/0x58 @ 1
[    1.776002] bus: 'platform': add driver wm831x-ldo
[    1.780052] bus: 'platform': add driver wm831x-aldo
[    1.784052] bus: 'platform': add driver wm831x-alive-ldo
[    1.792054] initcall wm831x_ldo_init+0x0/0x58 returned 0 after 15625 usecs
[    1.796003] calling  da903x_regulator_init+0x0/0xf @ 1
[    1.804002] bus: 'platform': add driver da903x-regulator
[    1.808054] initcall da903x_regulator_init+0x0/0xf returned 0 after 3906 usecs
[    1.816007] calling  tps_65023_init+0x0/0x11 @ 1
[    1.820002] bus: 'i2c': add driver tps65023
[    1.824052] i2c-core: driver [tps65023] registered
[    1.828004] initcall tps_65023_init+0x0/0x11 returned 0 after 7812 usecs
[    1.836003] calling  tps6507x_pmic_init+0x0/0xf @ 1
[    1.840002] bus: 'platform': add driver tps6507x-pmic
[    1.844054] initcall tps6507x_pmic_init+0x0/0xf returned 0 after 3906 usecs
[    1.852003] calling  misc_init+0x0/0x9b @ 1
[    1.856007] device class 'misc': registering
[    1.860055] initcall misc_init+0x0/0x9b returned 0 after 3906 usecs
[    1.868003] calling  tifm_init+0x0/0x6f @ 1
[    1.872071] bus: 'tifm': registered
[    1.876003] device class 'tifm_adapter': registering
[    1.880062] initcall tifm_init+0x0/0x6f returned 0 after 7812 usecs
[    1.884003] calling  pm860x_i2c_init+0x0/0x2a @ 1
[    1.888004] bus: 'i2c': add driver 88PM860x
[    1.892054] i2c-core: driver [88PM860x] registered
[    1.896004] initcall pm860x_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[    1.900003] calling  tc35892_init+0x0/0x11 @ 1
[    1.904002] bus: 'i2c': add driver tc35892
[    1.908052] i2c-core: driver [tc35892] registered
[    1.912003] initcall tc35892_init+0x0/0x11 returned 0 after 7812 usecs
[    1.916003] calling  wm831x_i2c_init+0x0/0x2a @ 1
[    1.920002] bus: 'i2c': add driver wm831x
[    1.924052] i2c-core: driver [wm831x] registered
[    1.928004] initcall wm831x_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[    1.932002] calling  tps_init+0x0/0xa1 @ 1
[    1.936002] tps65010: version 2 May 2005
[    1.940002] bus: 'i2c': add driver tps65010
[    1.944051] i2c-core: driver [tps65010] registered
[    1.948007] bus: 'i2c': remove driver tps65010
[    1.952049] driver: 'tps65010': driver_release
[    1.956005] i2c-core: driver [tps65010] unregistered
[    1.976005] bus: 'i2c': add driver tps65010
[    1.980052] i2c-core: driver [tps65010] registered
[    1.984006] bus: 'i2c': remove driver tps65010
[    1.988047] driver: 'tps65010': driver_release
[    1.992005] i2c-core: driver [tps65010] unregistered
[    2.012004] bus: 'i2c': add driver tps65010
[    2.016052] i2c-core: driver [tps65010] registered
[    2.020006] bus: 'i2c': remove driver tps65010
[    2.024047] driver: 'tps65010': driver_release
[    2.028005] i2c-core: driver [tps65010] unregistered
[    2.032001] tps65010: no chip?
[    2.036003] initcall tps_init+0x0/0xa1 returned -19 after 97656 usecs
[    2.040003] calling  tps6507x_i2c_init+0x0/0x11 @ 1
[    2.044002] bus: 'i2c': add driver tps6507x
[    2.048052] i2c-core: driver [tps6507x] registered
[    2.052004] initcall tps6507x_i2c_init+0x0/0x11 returned 0 after 7812 usecs
[    2.056003] calling  da903x_init+0x0/0x11 @ 1
[    2.060002] bus: 'i2c': add driver da903x
[    2.064061] i2c-core: driver [da903x] registered
[    2.068004] initcall da903x_init+0x0/0x11 returned 0 after 7812 usecs
[    2.072003] calling  max8925_i2c_init+0x0/0x2a @ 1
[    2.076002] bus: 'i2c': add driver max8925
[    2.080052] i2c-core: driver [max8925] registered
[    2.084004] initcall max8925_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[    2.088003] calling  init_scsi+0x0/0x79 @ 1
[    2.092388] device class 'scsi_host': registering
[    2.096108] bus: 'scsi': registered
[    2.100002] device class 'scsi_device': registering
[    2.104063] SCSI subsystem initialized
[    2.108004] initcall init_scsi+0x0/0x79 returned 0 after 15625 usecs
[    2.112004] calling  ata_init+0x0/0x293 @ 1
[    2.116043] libata version 3.00 loaded.
[    2.120005] initcall ata_init+0x0/0x293 returned 0 after 3906 usecs
[    2.124003] calling  phy_init+0x0/0x2a @ 1
[    2.128002] device class 'mdio_bus': registering
[    2.136122] bus: 'mdio_bus': registered
[    2.140003] bus: 'mdio_bus': add driver Generic PHY
[    2.144055] initcall phy_init+0x0/0x2a returned 0 after 15625 usecs
[    2.148004] calling  init_pcmcia_cs+0x0/0x2d @ 1
[    2.156002] device class 'pcmcia_socket': registering
[    2.160052] initcall init_pcmcia_cs+0x0/0x2d returned 0 after 3906 usecs
[    2.164003] calling  nop_usb_xceiv_init+0x0/0xf @ 1
[    2.172002] bus: 'platform': add driver nop_usb_xceiv
[    2.176054] initcall nop_usb_xceiv_init+0x0/0xf returned 0 after 3906 usecs
[    2.184003] calling  usb_init+0x0/0x136 @ 1
[    2.188070] bus: 'usb': registered
[    2.192016] bus: 'usb': add driver usbfs
[    2.196056] usbcore: registered new interface driver usbfs
[    2.200005] device class 'usb_device': registering
[    2.204050] bus: 'usb': add driver hub
[    2.208054] usbcore: registered new interface driver hub
[    2.216025] bus: 'usb': add driver usb
[    2.219814] usbcore: registered new device driver usb
[    2.220005] initcall usb_init+0x0/0x136 returned 0 after 31250 usecs
[    2.224004] calling  serio_init+0x0/0x73 @ 1
[    2.228069] bus: 'serio': registered
[    2.232042] initcall serio_init+0x0/0x73 returned 0 after 3906 usecs
[    2.240003] calling  gameport_init+0x0/0x73 @ 1
[    2.244062] bus: 'gameport': registered
[    2.248042] initcall gameport_init+0x0/0x73 returned 0 after 3906 usecs
[    2.252003] calling  input_init+0x0/0x10f @ 1
[    2.256002] device class 'input': registering
[    2.260072] initcall input_init+0x0/0x10f returned 0 after 3906 usecs
[    2.264003] calling  tca6416_keypad_init+0x0/0x11 @ 1
[    2.268003] bus: 'i2c': add driver tca6416-keypad
[    2.272053] i2c-core: driver [tca6416-keypad] registered
[    2.276003] initcall tca6416_keypad_init+0x0/0x11 returned 0 after 7812 usecs
[    2.280003] calling  rtc_init+0x0/0x5e @ 1
[    2.284002] device class 'rtc': registering
[    2.288051] initcall rtc_init+0x0/0x5e returned 0 after 3906 usecs
[    2.292003] calling  i2c_gpio_init+0x0/0x28 @ 1
[    2.296004] bus: 'platform': add driver i2c-gpio
[    2.300056] initcall i2c_gpio_init+0x0/0x28 returned 0 after 3906 usecs
[    2.304003] calling  pps_init+0x0/0x92 @ 1
[    2.308002] device class 'pps': registering
[    2.312049] LinuxPPS API ver. 1 registered
[    2.316004] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.320003] initcall pps_init+0x0/0x92 returned 0 after 11718 usecs
[    2.324003] calling  power_supply_class_init+0x0/0x39 @ 1
[    2.328002] device class 'power_supply': registering
[    2.332051] initcall power_supply_class_init+0x0/0x39 returned 0 after 3906 usecs
[    2.336003] calling  hwmon_init+0x0/0xf3 @ 1
[    2.340003] device class 'hwmon': registering
[    2.344050] initcall hwmon_init+0x0/0xf3 returned 0 after 3906 usecs
[    2.348003] calling  thermal_init+0x0/0x46 @ 1
[    2.352002] device class 'thermal': registering
[    2.356062] initcall thermal_init+0x0/0x46 returned 0 after 3906 usecs
[    2.360004] calling  raid6_select_algo+0x0/0x16e @ 1
[    2.432065] raid6: int32x1    852 MB/s
[    2.500049] raid6: int32x2   1048 MB/s
[    2.568030] raid6: int32x4    565 MB/s
[    2.636050] raid6: int32x8    417 MB/s
[    2.704003] raid6: mmxx1     1666 MB/s
[    2.772010] raid6: mmxx2     2879 MB/s
[    2.840026] raid6: sse1x1    1495 MB/s
[    2.908019] raid6: sse1x2    2153 MB/s
[    2.976004] raid6: sse2x1    2558 MB/s
[    3.044015] raid6: sse2x2    3026 MB/s
[    3.047762] raid6: using algorithm sse2x2 (3026 MB/s)
[    3.048008] initcall raid6_select_algo+0x0/0x16e returned 0 after 667968 usecs
[    3.052003] calling  md_init+0x0/0xb7 @ 1
[    3.056013] initcall md_init+0x0/0xb7 returned 0 after 0 usecs
[    3.060003] calling  leds_init+0x0/0x3d @ 1
[    3.064002] device class 'leds': registering
[    3.068052] initcall leds_init+0x0/0x3d returned 0 after 3906 usecs
[    3.072003] calling  init_soundcore+0x0/0x83 @ 1
[    3.076006] device class 'sound': registering
[    3.080050] initcall init_soundcore+0x0/0x83 returned 0 after 3906 usecs
[    3.084003] calling  pci_subsys_init+0x0/0x44 @ 1
[    3.088002] PCI: Probing PCI hardware
[    3.092003] PCI: Probing PCI hardware (bus 00)
[    3.096010] device: 'pci0000:00': device_add
[    3.100020] PM: Adding info for No Bus:pci0000:00
[    3.104006] device: '0000:00': device_add
[    3.108017] PM: Adding info for No Bus:0000:00
[    3.112049] pci_bus 0000:00: scanning bus
[    3.116072] pci 0000:00:00.0: found [10de:005e] class 000580 header type 00
[    3.120282] pci 0000:00:01.0: found [10de:0050] class 000601 header type 00
[    3.124177] pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00
[    3.128042] pci 0000:00:01.1: reg 10: [io  0xdc00-0xdc1f]
[    3.132064] pci 0000:00:01.1: reg 20: [io  0x4c00-0x4c3f]
[    3.136018] pci 0000:00:01.1: reg 24: [io  0x4c40-0x4c7f]
[    3.140074] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    3.144012] pci 0000:00:01.1: PME# disabled
[    3.148078] pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00
[    3.152042] pci 0000:00:02.0: reg 10: [mem 0xda102000-0xda102fff]
[    3.156151] pci 0000:00:02.0: supports D1 D2
[    3.160002] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.164011] pci 0000:00:02.0: PME# disabled
[    3.168060] pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00
[    3.172050] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
[    3.176176] pci 0000:00:02.1: supports D1 D2
[    3.180002] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    3.184012] pci 0000:00:02.1: PME# disabled
[    3.188091] pci 0000:00:04.0: found [10de:0059] class 000401 header type 00
[    3.192041] pci 0000:00:04.0: reg 10: [io  0xd400-0xd4ff]
[    3.196018] pci 0000:00:04.0: reg 14: [io  0xd800-0xd8ff]
[    3.200018] pci 0000:00:04.0: reg 18: [mem 0xda101000-0xda101fff]
[    3.204120] pci 0000:00:04.0: supports D1 D2
[    3.208056] pci 0000:00:06.0: found [10de:0053] class 000101 header type 00
[    3.212100] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    3.216140] pci 0000:00:09.0: found [10de:005c] class 000604 header type 01
[    3.220110] pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00
[    3.224041] pci 0000:00:0a.0: reg 10: [mem 0xda100000-0xda100fff]
[    3.228018] pci 0000:00:0a.0: reg 14: [io  0xd000-0xd007]
[    3.232135] pci 0000:00:0a.0: supports D1 D2
[    3.236003] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.240011] pci 0000:00:0a.0: PME# disabled
[    3.244075] pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01
[    3.248190] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.252011] pci 0000:00:0b.0: PME# disabled
[    3.256098] pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01
[    3.260189] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.264011] pci 0000:00:0c.0: PME# disabled
[    3.268098] pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01
[    3.272190] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.276011] pci 0000:00:0d.0: PME# disabled
[    3.280097] pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01
[    3.284190] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.288011] pci 0000:00:0e.0: PME# disabled
[    3.292113] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00
[    3.296202] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00
[    3.300179] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00
[    3.304157] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00
[    3.308182] pci_bus 0000:00: fixups for bus
[    3.312002] PCI: peer root bus 00 res updated from pci conf
[    3.316002] Clocksource tsc unstable (delta = 116003322 ns)
[    3.320024] pci 0000:00:09.0: scanning [bus 05-05] behind bridge, pass 0
[    3.328028] pci_bus 0000:05: scanning bus
[    3.332067] pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00
[    3.336044] pci 0000:05:07.0: reg 10: [io  0xc000-0xc0ff]
[    3.340019] pci 0000:05:07.0: reg 14: [mem 0xda000000-0xda0000ff]
[    3.344142] pci 0000:05:07.0: supports D1 D2
[    3.348002] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
[    3.352012] pci 0000:05:07.0: PME# disabled
[    3.356121] pci_bus 0000:05: fixups for bus
[    3.360002] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
[    3.364010] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
[    3.368010] pci 0000:00:09.0:   bridge window [mem 0xda000000-0xda0fffff]
[    3.372010] pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.376003] pci 0000:00:09.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    3.380003] pci 0000:00:09.0:   bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[    3.384003] pci 0000:00:09.0:   bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
[    3.388003] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    3.392002] pci_bus 0000:05: bus scan returning with max=05
[    3.396012] pci 0000:00:0b.0: scanning [bus 04-04] behind bridge, pass 0
[    3.400188] pci_bus 0000:04: scanning bus
[    3.404007] pci_bus 0000:04: fixups for bus
[    3.408002] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    3.412018] pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)
[    3.416010] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    3.420018] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.424002] pci_bus 0000:04: bus scan returning with max=04
[    3.428012] pci 0000:00:0c.0: scanning [bus 03-03] behind bridge, pass 0
[    3.432175] pci_bus 0000:03: scanning bus
[    3.436006] pci_bus 0000:03: fixups for bus
[    3.440002] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    3.444018] pci 0000:00:0c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    3.448010] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    3.452018] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.456002] pci_bus 0000:03: bus scan returning with max=03
[    3.460012] pci 0000:00:0d.0: scanning [bus 02-02] behind bridge, pass 0
[    3.464174] pci_bus 0000:02: scanning bus
[    3.468006] pci_bus 0000:02: fixups for bus
[    3.472002] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    3.476018] pci 0000:00:0d.0:   bridge window [io  0xf000-0x0000] (disabled)
[    3.480010] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    3.484018] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.488002] pci_bus 0000:02: bus scan returning with max=02
[    3.492013] pci 0000:00:0e.0: scanning [bus 01-01] behind bridge, pass 0
[    3.496174] pci_bus 0000:01: scanning bus
[    3.500045] pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00
[    3.504028] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[    3.508018] pci 0000:01:00.0: reg 14: [io  0xb000-0xb0ff]
[    3.512018] pci 0000:01:00.0: reg 18: [mem 0xd9000000-0xd900ffff]
[    3.516067] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    3.520081] pci 0000:01:00.0: supports D1 D2
[    3.524078] pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00
[    3.528023] pci 0000:01:00.1: reg 10: [mem 0xd9010000-0xd901ffff]
[    3.532170] pci 0000:01:00.1: supports D1 D2
[    3.536052] pci_bus 0000:01: fixups for bus
[    3.540002] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    3.544018] pci 0000:00:0e.0:   bridge window [io  0xb000-0xbfff]
[    3.548010] pci 0000:00:0e.0:   bridge window [mem 0xd8000000-0xd9ffffff]
[    3.552018] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    3.556002] pci_bus 0000:01: bus scan returning with max=01
[    3.560012] pci 0000:00:09.0: scanning [bus 05-05] behind bridge, pass 1
[    3.564021] pci 0000:00:0b.0: scanning [bus 04-04] behind bridge, pass 1
[    3.568021] pci 0000:00:0c.0: scanning [bus 03-03] behind bridge, pass 1
[    3.572021] pci 0000:00:0d.0: scanning [bus 02-02] behind bridge, pass 1
[    3.576021] pci 0000:00:0e.0: scanning [bus 01-01] behind bridge, pass 1
[    3.580016] pci_bus 0000:00: bus scan returning with max=05
[    3.584003] device: '0000:00:00.0': device_add
[    3.588006] bus: 'pci': add device 0000:00:00.0
[    3.592036] PM: Adding info for pci:0000:00:00.0
[    3.596056] device: '0000:00:01.0': device_add
[    3.600005] bus: 'pci': add device 0000:00:01.0
[    3.604042] PM: Adding info for pci:0000:00:01.0
[    3.608053] device: '0000:00:01.1': device_add
[    3.612005] bus: 'pci': add device 0000:00:01.1
[    3.616032] PM: Adding info for pci:0000:00:01.1
[    3.620052] device: '0000:00:02.0': device_add
[    3.624014] bus: 'pci': add device 0000:00:02.0
[    3.628033] PM: Adding info for pci:0000:00:02.0
[    3.632052] device: '0000:00:02.1': device_add
[    3.636005] bus: 'pci': add device 0000:00:02.1
[    3.640042] PM: Adding info for pci:0000:00:02.1
[    3.644060] device: '0000:00:04.0': device_add
[    3.648006] bus: 'pci': add device 0000:00:04.0
[    3.652033] PM: Adding info for pci:0000:00:04.0
[    3.656052] device: '0000:00:06.0': device_add
[    3.660005] bus: 'pci': add device 0000:00:06.0
[    3.664042] PM: Adding info for pci:0000:00:06.0
[    3.668052] device: '0000:00:09.0': device_add
[    3.672006] bus: 'pci': add device 0000:00:09.0
[    3.676033] PM: Adding info for pci:0000:00:09.0
[    3.680051] device: '0000:00:0a.0': device_add
[    3.684006] bus: 'pci': add device 0000:00:0a.0
[    3.688042] PM: Adding info for pci:0000:00:0a.0
[    3.692052] device: '0000:00:0b.0': device_add
[    3.696006] bus: 'pci': add device 0000:00:0b.0
[    3.700033] PM: Adding info for pci:0000:00:0b.0
[    3.704051] device: '0000:00:0c.0': device_add
[    3.708015] bus: 'pci': add device 0000:00:0c.0
[    3.712033] PM: Adding info for pci:0000:00:0c.0
[    3.716052] device: '0000:00:0d.0': device_add
[    3.720006] bus: 'pci': add device 0000:00:0d.0
[    3.724042] PM: Adding info for pci:0000:00:0d.0
[    3.728052] device: '0000:00:0e.0': device_add
[    3.732006] bus: 'pci': add device 0000:00:0e.0
[    3.736033] PM: Adding info for pci:0000:00:0e.0
[    3.740051] device: '0000:00:18.0': device_add
[    3.744006] bus: 'pci': add device 0000:00:18.0
[    3.748043] PM: Adding info for pci:0000:00:18.0
[    3.752052] device: '0000:00:18.1': device_add
[    3.756006] bus: 'pci': add device 0000:00:18.1
[    3.760033] PM: Adding info for pci:0000:00:18.1
[    3.764051] device: '0000:00:18.2': device_add
[    3.768006] bus: 'pci': add device 0000:00:18.2
[    3.772046] PM: Adding info for pci:0000:00:18.2
[    3.776052] device: '0000:00:18.3': device_add
[    3.780006] bus: 'pci': add device 0000:00:18.3
[    3.784033] PM: Adding info for pci:0000:00:18.3
[    3.788052] device: '0000:05:07.0': device_add
[    3.792014] bus: 'pci': add device 0000:05:07.0
[    3.796044] PM: Adding info for pci:0000:05:07.0
[    3.800053] device: '0000:05': device_add
[    3.804018] PM: Adding info for No Bus:0000:05
[    3.808053] device: '0000:04': device_add
[    3.812018] PM: Adding info for No Bus:0000:04
[    3.816052] device: '0000:03': device_add
[    3.820027] PM: Adding info for No Bus:0000:03
[    3.824053] device: '0000:02': device_add
[    3.828017] PM: Adding info for No Bus:0000:02
[    3.832052] device: '0000:01:00.0': device_add
[    3.836006] bus: 'pci': add device 0000:01:00.0
[    3.840035] PM: Adding info for pci:0000:01:00.0
[    3.844052] device: '0000:01:00.1': device_add
[    3.848015] bus: 'pci': add device 0000:01:00.1
[    3.852035] PM: Adding info for pci:0000:01:00.1
[    3.856053] device: '0000:01': device_add
[    3.860018] PM: Adding info for No Bus:0000:01
[    3.864329] pci 0000:00:00.0: default IRQ router [10de:005e]
[    3.868011] pci 0000:00:01.1: ignoring bogus IRQ 255
[    3.872004] pci 0000:00:02.0: ignoring bogus IRQ 255
[    3.876004] pci 0000:00:02.1: ignoring bogus IRQ 255
[    3.880036] PCI: pci_cache_line_size set to 64 bytes
[    3.884025] pci 0000:00:01.1: BAR 0: reserving [io  0xdc00-0xdc1f flags 0x40101] (d=0, p=0)
[    3.888003] pci 0000:00:01.1: BAR 4: reserving [io  0x4c00-0x4c3f flags 0x40101] (d=0, p=0)
[    3.892003] pci 0000:00:01.1: BAR 5: reserving [io  0x4c40-0x4c7f flags 0x40101] (d=0, p=0)
[    3.896009] pci 0000:00:02.0: BAR 0: reserving [mem 0xda102000-0xda102fff flags 0x40200] (d=0, p=0)
[    3.900009] pci 0000:00:02.1: BAR 0: reserving [mem 0xfeb00000-0xfeb000ff flags 0x40200] (d=0, p=0)
[    3.904003] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
[    3.908009] pci 0000:00:04.0: BAR 0: reserving [io  0xd400-0xd4ff flags 0x40101] (d=0, p=0)
[    3.912003] pci 0000:00:04.0: BAR 1: reserving [io  0xd800-0xd8ff flags 0x40101] (d=0, p=0)
[    3.916003] pci 0000:00:04.0: BAR 2: reserving [mem 0xda101000-0xda101fff flags 0x40200] (d=0, p=0)
[    3.920009] pci 0000:00:06.0: BAR 0: reserving [io  0x01f0-0x01f7 flags 0x110] (d=0, p=0)
[    3.924003] pci 0000:00:06.0: BAR 1: reserving [io  0x03f6 flags 0x110] (d=0, p=0)
[    3.928003] pci 0000:00:06.0: BAR 2: reserving [io  0x0170-0x0177 flags 0x110] (d=0, p=0)
[    3.932003] pci 0000:00:06.0: BAR 3: reserving [io  0x0376 flags 0x110] (d=0, p=0)
[    3.936003] pci 0000:00:06.0: BAR 4: reserving [io  0xf000-0xf00f flags 0x40101] (d=0, p=0)
[    3.940015] pci 0000:00:0a.0: BAR 0: reserving [mem 0xda100000-0xda100fff flags 0x40200] (d=0, p=0)
[    3.944003] pci 0000:00:0a.0: BAR 1: reserving [io  0xd000-0xd007 flags 0x40101] (d=0, p=0)
[    3.948058] pci 0000:05:07.0: BAR 0: reserving [io  0xc000-0xc0ff flags 0x40101] (d=0, p=0)
[    3.952003] pci 0000:05:07.0: BAR 1: reserving [mem 0xda000000-0xda0000ff flags 0x40200] (d=0, p=0)
[    3.956009] pci 0000:01:00.0: BAR 0: reserving [mem 0xd0000000-0xd7ffffff flags 0x42208] (d=0, p=0)
[    3.960003] pci 0000:01:00.0: BAR 1: reserving [io  0xb000-0xb0ff flags 0x40101] (d=0, p=0)
[    3.964003] pci 0000:01:00.0: BAR 2: reserving [mem 0xd9000000-0xd900ffff flags 0x40200] (d=0, p=0)
[    3.968135] pci 0000:01:00.1: BAR 0: reserving [mem 0xd9010000-0xd901ffff flags 0x40200] (d=1, p=1)
[    3.972006] Expanded resource reserved due to conflict with PCI Bus #00
[    3.976002] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    3.980004] reserve RAM buffer: 000000003fff0000 - 000000003fffffff initcall pci_subsys_init+0x0/0x44 returned 0 after 875000 usecs
[    3.988003] calling  proto_init+0x0/0xf @ 1
[    3.992018] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[    3.996003] calling  net_dev_init+0x0/0x1cd @ 1
[    4.000019] device class 'net': registering
[    4.008054] device: 'lo': device_add
[    4.011704] PM: Adding info for No Bus:lo
[    4.012143] initcall net_dev_init+0x0/0x1cd returned 0 after 11718 usecs
[    4.016003] calling  neigh_init+0x0/0x66 @ 1
[    4.020003] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs
[    4.024003] calling  fib_rules_init+0x0/0x99 @ 1
[    4.028004] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs
[    4.032003] calling  genl_init+0x0/0x77 @ 1
[    4.036058] initcall genl_init+0x0/0x77 returned 0 after 0 usecs
[    4.040003] calling  cipso_v4_init+0x0/0x6b @ 1
[    4.044024] initcall cipso_v4_init+0x0/0x6b returned 0 after 0 usecs
[    4.048003] calling  wanrouter_init+0x0/0x42 @ 1
[    4.052002] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[    4.056015] initcall wanrouter_init+0x0/0x42 returned 0 after 3906 usecs
[    4.060002] calling  bt_init+0x0/0x4f @ 1
[    4.064002] Bluetooth: Core ver 2.15
[    4.068014] device class 'bluetooth': registering
[    4.072061] NET: Registered protocol family 31
[    4.076002] Bluetooth: HCI device and connection manager initialized
[    4.080003] Bluetooth: HCI socket layer initialized
[    4.084003] initcall bt_init+0x0/0x4f returned 0 after 19531 usecs
[    4.088002] calling  atm_init+0x0/0xbc @ 1
[    4.092002] NET: Registered protocol family 8
[    4.096002] NET: Registered protocol family 20
[    4.100021] device class 'atm': registering
[    4.104051] initcall atm_init+0x0/0xbc returned 0 after 11718 usecs
[    4.108003] calling  wireless_nlevent_init+0x0/0xf @ 1
[    4.112004] initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs
[    4.116003] calling  netlbl_init+0x0/0x6d @ 1
[    4.120001] NetLabel: Initializing
[    4.124002] NetLabel:  domain hash size = 128
[    4.128001] NetLabel:  protocols = UNLABELED CIPSOv4
[    4.132134] NetLabel:  unlabeled traffic allowed by default
[    4.136003] initcall netlbl_init+0x0/0x6d returned 0 after 15625 usecs
[    4.140003] calling  rfkill_init+0x0/0x66 @ 1
[    4.144002] device class 'rfkill': registering
[    4.148054] device: 'rfkill': device_add
[    4.152015] PM: Adding info for No Bus:rfkill
[    4.160023] initcall rfkill_init+0x0/0x66 returned 0 after 15625 usecs
[    4.164003] calling  wpan_phy_class_init+0x0/0x33 @ 1
[    4.168002] device class 'ieee802154': registering
[    4.172166] initcall wpan_phy_class_init+0x0/0x33 returned 0 after 3906 usecs
[    4.176004] calling  print_ICs+0x0/0x46d @ 1
[    4.180002] 
[    4.180002] printing PIC contents
[    4.184003] ... PIC  IMR: fffa
[    4.187057] ... PIC  IRR: 0001
[    4.188001] ... PIC  ISR: 0001
[    4.192003] ... PIC ELCR: 0828
[    4.196003] printing local APIC contents on CPU#0/0:
[    4.200000] ... APIC ID:      00000000 (0)
[    4.200000] ... APIC VERSION: 00040010
[    4.200000] ... APIC TASKPRI: 00000000 (00)
[    4.200000] ... APIC ARBPRI: 000000e0 (e0)
[    4.200000] ... APIC PROCPRI: 00000000
[    4.200000] ... APIC LDR: 01000000
[    4.200000] ... APIC DFR: ffffffff
[    4.200000] ... APIC SPIV: 000001ff
[    4.200000] ... APIC ISR field:
[    4.200000] 0000000000000000000000000000000000000000000000000000000000000000
[    4.200000] ... APIC TMR field:
[    4.200000] 0000000000000000000000000000000000000000000000000000000000000000
[    4.200000] ... APIC IRR field:
[    4.200000] 0000000000000000000000000000000000000000000000000000000000008000
[    4.200000] ... APIC ESR: 00000000
[    4.200000] ... APIC ICR: 000008fd
[    4.200000] ... APIC ICR2: 02000000
[    4.200000] ... APIC LVTT: 000200ef
[    4.200000] ... APIC LVTPC: 00000400
[    4.200000] ... APIC LVT0: 00010700
[    4.200000] ... APIC LVT1: 00000400
[    4.200000] ... APIC LVTERR: 000000fe
[    4.200000] ... APIC TMICT: 0000c454
[    4.200000] ... APIC TMCCT: 0000465c
[    4.200000] ... APIC TDCR: 00000003
[    4.200000] 
[    4.200002] number of MP IRQ sources: 17.
[    4.204002] number of IO-APIC #2 registers: 24.
[    4.208001] testing the IO APIC.......................
[    4.212004] 
[    4.213498] IO APIC #2......
[    4.216001] .... register #00: 00000000
[    4.220001] .......    : physical APIC id: 00
[    4.224001] .......    : Delivery Type: 0
[    4.228001] .......    : LTS          : 0
[    4.232001] .... register #01: 00170011
[    4.236002] .......     : max redirection entries: 0017
[    4.240001] .......     : PRQ implemented: 0
[    4.244001] .......     : IO APIC version: 0011
[    4.248001] .... register #02: 00000000
[    4.252001] .......     : arbitration: 00
[    4.256001] .... IRQ redirection table:
[    4.260002]  NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
[    4.264004]  00 003 0    0    0   0   0    1    1    30
[    4.268003]  01 003 0    0    0   0   0    1    1    31
[    4.272003]  02 000 1    0    0   0   0    0    0    00
[    4.280003]  03 003 1    1    0   1   0    1    1    29
[    4.284003]  04 003 0    0    0   0   0    1    1    34
[    4.288003]  05 003 1    1    0   1   0    1    1    41
[    4.295230]  06 003 0    0    0   0   0    1    1    36
[    4.300003]  07 003 1    0    0   0   0    1    1    37
[    4.304003]  08 003 0    0    0   0   0    1    1    38
[    4.311232]  09 003 0    0    0   0   0    1    1    39
[    4.316006]  0a 003 0    0    0   0   0    1    1    3A
[    4.320003]  0b 003 1    1    0   1   0    1    1    49
[    4.327232]  0c 003 0    0    0   0   0    1    1    3C
[    4.332003]  0d 003 0    0    0   0   0    1    1    3D
[    4.336003]  0e 003 0    0    0   0   0    1    1    3E
[    4.340003]  0f 003 0    0    0   0   0    1    1    3F
[    4.348003]  10 000 1    0    0   0   0    0    0    00
[    4.352003]  11 000 1    0    0   0   0    0    0    00
[    4.356003]  12 000 1    0    0   0   0    0    0    00
[    4.364003]  13 000 1    0    0   0   0    0    0    00
[    4.368003]  14 000 1    0    0   0   0    0    0    00
[    4.372003]  15 000 1    0    0   0   0    0    0    00
[    4.379232]  16 000 1    0    0   0   0    0    0    00
[    4.384003]  17 000 1    0    0   0   0    0    0    00
[    4.388001] IRQ to pin mappings:
[    4.392002] IRQ0 -> 0:0
[    4.396001] IRQ1 -> 0:1
[    4.398476] IRQ4 -> 0:4
[    4.400736] IRQ6 -> 0:6
[    4.403213] IRQ7 -> 0:7
[    4.404728] IRQ8 -> 0:8
[    4.408190] IRQ9 -> 0:9
[    4.410667] IRQ10 -> 0:10
[    4.412815] IRQ12 -> 0:12
[    4.416197] IRQ13 -> 0:13
[    4.418847] IRQ14 -> 0:14
[    4.420815] IRQ15 -> 0:15
[    4.424200] IRQ29 -> 0:3
[    4.426770] IRQ31 -> 0:5
[    4.428728] IRQ37 -> 0:11
[    4.432098] .................................... done.
[    4.436003] initcall print_ICs+0x0/0x46d returned 0 after 250000 usecs
[    4.440003] calling  hpet_late_init+0x0/0xef @ 1
[    4.444003] initcall hpet_late_init+0x0/0xef returned -19 after 0 usecs
[    4.448003] calling  init_k8_nbs+0x0/0x21 @ 1
[    4.452097] initcall init_k8_nbs+0x0/0x21 returned 0 after 0 usecs
[    4.456004] calling  clocksource_done_booting+0x0/0x4f @ 1
[    4.460006] initcall clocksource_done_booting+0x0/0x4f returned 0 after 0 usecs
[    4.464003] calling  rb_init_debugfs+0x0/0x27 @ 1
[    4.468016] initcall rb_init_debugfs+0x0/0x27 returned 0 after 0 usecs
[    4.472003] calling  tracer_init_debugfs+0x0/0x306 @ 1
[    4.476309] initcall tracer_init_debugfs+0x0/0x306 returned 0 after 0 usecs
[    4.480003] calling  init_trace_printk_function_export+0x0/0x2a @ 1
[    4.484008] initcall init_trace_printk_function_export+0x0/0x2a returned 0 after 0 usecs
[    4.488003] calling  stat_workqueue_init+0x0/0x27 @ 1
[    4.492022] initcall stat_workqueue_init+0x0/0x27 returned 0 after 0 usecs
[    4.496003] calling  event_trace_init+0x0/0x17a @ 1
[    4.549868] initcall event_trace_init+0x0/0x17a returned 0 after 46875 usecs
[    4.552005] calling  init_pipe_fs+0x0/0x3d @ 1
[    4.556035] initcall init_pipe_fs+0x0/0x3d returned 0 after 0 usecs
[    4.560003] calling  anon_inode_init+0x0/0xf2 @ 1
[    4.564024] initcall anon_inode_init+0x0/0xf2 returned 0 after 0 usecs
[    4.568003] calling  fscache_init+0x0/0x96 @ 1
[    4.572002] Slow work thread pool: Starting up
[    4.580025] Slow work thread pool: Ready
[    4.583926] FS-Cache: Loaded
[    4.584004] initcall fscache_init+0x0/0x96 returned 0 after 11718 usecs
[    4.592004] calling  cachefiles_init+0x0/0x8e @ 1
[    4.596015] device: 'cachefiles': device_add
[    4.600025] PM: Adding info for No Bus:cachefiles
[    4.604063] CacheFiles: Loaded
[    4.608004] initcall cachefiles_init+0x0/0x8e returned 0 after 11718 usecs
[    4.616003] calling  tomoyo_initerface_init+0x0/0x112 @ 1
[    4.620077] initcall tomoyo_initerface_init+0x0/0x112 returned 0 after 0 usecs
[    4.628003] calling  blk_scsi_ioctl_init+0x0/0x288 @ 1
[    4.632003] initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 0 usecs
[    4.640004] calling  pnp_system_init+0x0/0xf @ 1
[    4.644002] bus: 'pnp': add driver system
[    4.648055] initcall pnp_system_init+0x0/0xf returned 0 after 3906 usecs
[    4.656003] calling  chr_dev_init+0x0/0xaf @ 1
[    4.660011] device class 'mem': registering
[    4.664054] device: 'mem': device_add
[    4.668014] PM: Adding info for No Bus:mem
[    4.672049] device: 'kmem': device_add
[    4.676013] PM: Adding info for No Bus:kmem
[    4.680048] device: 'null': device_add
[    4.684013] PM: Adding info for No Bus:null
[    4.688062] device: 'port': device_add
[    4.692014] PM: Adding info for No Bus:port
[    4.696058] device: 'zero': device_add
[    4.700023] PM: Adding info for No Bus:zero
[    4.704053] device: 'full': device_add
[    4.708013] PM: Adding info for No Bus:full
[    4.712050] device: 'random': device_add
[    4.716013] PM: Adding info for No Bus:random
[    4.720049] device: 'urandom': device_add
[    4.724013] PM: Adding info for No Bus:urandom
[    4.728049] device: 'kmsg': device_add
[    4.732014] PM: Adding info for No Bus:kmsg
[    4.736050] device: 'oldmem': device_add
[    4.740024] PM: Adding info for No Bus:oldmem
[    4.744049] initcall chr_dev_init+0x0/0xaf returned 0 after 82031 usecs
[    4.752003] calling  firmware_class_init+0x0/0x14 @ 1
[    4.756002] device class 'firmware': registering
[    4.760071] initcall firmware_class_init+0x0/0x14 returned 0 after 3906 usecs
[    4.768005] calling  cpufreq_gov_performance_init+0x0/0xf @ 1
[    4.776005] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 usecs
[    4.780003] calling  cpufreq_gov_dbs_init+0x0/0x9f @ 1
[    4.788042] initcall cpufreq_gov_dbs_init+0x0/0x9f returned 0 after 0 usecs
[    4.796004] calling  ssb_modinit+0x0/0x4d @ 1
[    4.800082] bus: 'ssb': registered
[    4.803483] initcall ssb_modinit+0x0/0x4d returned 0 after 0 usecs
[    4.808003] calling  pcibios_assign_resources+0x0/0x66 @ 1
[    4.812176] pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x400000ff]
[    4.820012] pci 0000:00:02.1: BAR 0: set to [mem 0x40000000-0x400000ff] (PCI address [0x40000000-0x400000ff]
[    4.832006] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[    4.836006] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
[    4.840014] pci 0000:00:09.0:   bridge window [mem 0xda000000-0xda0fffff]
[    4.848009] pci 0000:00:09.0:   bridge window [mem pref disabled]
[    4.856019] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    4.860002] pci 0000:00:0b.0:   bridge window [io  disabled]
[    4.864013] pci 0000:00:0b.0:   bridge window [mem disabled]
[    4.872009] pci 0000:00:0b.0:   bridge window [mem pref disabled]
[    4.876019] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    4.884002] pci 0000:00:0c.0:   bridge window [io  disabled]
[    4.888013] pci 0000:00:0c.0:   bridge window [mem disabled]
[    4.892009] pci 0000:00:0c.0:   bridge window [mem pref disabled]
[    4.900019] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    4.904002] pci 0000:00:0d.0:   bridge window [io  disabled]
[    4.912013] pci 0000:00:0d.0:   bridge window [mem disabled]
[    4.916009] pci 0000:00:0d.0:   bridge window [mem pref disabled]
[    4.924021] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
[    4.928005] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    4.936006] pci 0000:00:0e.0:   bridge window [io  0xb000-0xbfff]
[    4.940013] pci 0000:00:0e.0:   bridge window [mem 0xd8000000-0xd9ffffff]
[    4.948010] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    4.956037] pci 0000:00:09.0: setting latency timer to 64
[    4.960036] pci 0000:00:0b.0: setting latency timer to 64
[    4.968036] pci 0000:00:0c.0: setting latency timer to 64
[    4.972036] pci 0000:00:0d.0: setting latency timer to 64
[    4.976036] pci 0000:00:0e.0: setting latency timer to 64
[    4.984008] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    4.988002] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
[    4.996002] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
[    5.000002] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    5.008003] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    5.012002] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
[    5.020002] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
[    5.024003] pci_bus 0000:05: resource 5 [mem 0x40000000-0xffffffff]
[    5.032002] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
[    5.036002] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[    5.044003] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    5.048002] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
[    5.056003] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[    5.064004] initcall pcibios_assign_resources+0x0/0x66 returned 0 after 246093 usecs
[    5.072004] calling  inet_init+0x0/0x202 @ 1
[    5.076106] NET: Registered protocol family 2
[    5.080051] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    5.088311] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    5.096728] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[    5.104307] TCP: Hash tables configured (established 131072 bind 65536)
[    5.108002] TCP reno registered
[    5.112012] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    5.120023] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    5.124135] initcall inet_init+0x0/0x202 returned 0 after 46875 usecs
[    5.132004] calling  af_unix_init+0x0/0x47 @ 1
[    5.136013] NET: Registered protocol family 1
[    5.140007] initcall af_unix_init+0x0/0x47 returned 0 after 3906 usecs
[    5.148004] calling  populate_rootfs+0x0/0x1c6 @ 1
[    5.152649] initcall populate_rootfs+0x0/0x1c6 returned 0 after 0 usecs
[    5.160005] calling  pci_iommu_init+0x0/0x21 @ 1
[    5.200581] DMA-API: preallocated 32768 debug entries
[    5.204002] DMA-API: debugging enabled by kernel config
[    5.208009] initcall pci_iommu_init+0x0/0x21 returned 0 after 42968 usecs
[    5.216004] calling  i8259A_init_sysfs+0x0/0x1d @ 1
[    5.220002] Registering sysdev class 'i8259'
[    5.224071] Registering sys device of class 'i8259'
[    5.228007] Registering sys device 'i82590'
[    5.236046] initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 15625 usecs
[    5.240003] calling  sbf_init+0x0/0xd8 @ 1
[    5.244003] initcall sbf_init+0x0/0xd8 returned 0 after 0 usecs
[    5.252003] calling  i8237A_init_sysfs+0x0/0x1d @ 1
[    5.256002] Registering sysdev class 'i8237'
[    5.260048] Registering sys device of class 'i8237'
[    5.264007] Registering sys device 'i82370'
[    5.268045] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 11718 usecs
[    5.276004] calling  add_rtc_cmos+0x0/0x87 @ 1
[    5.280010] Registering platform device 'rtc_cmos'. Parent at platform
[    5.288003] device: 'rtc_cmos': device_add
[    5.292011] bus: 'platform': add device rtc_cmos
[    5.296017] PM: Adding info for platform:rtc_cmos
[    5.300055] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    5.308004] initcall add_rtc_cmos+0x0/0x87 returned 0 after 27343 usecs
[    5.316005] calling  cache_sysfs_init+0x0/0x6f @ 1
[    5.320466] initcall cache_sysfs_init+0x0/0x6f returned 0 after 0 usecs
[    5.328004] calling  mcheck_init_device+0x0/0xf5 @ 1
[    5.332004] Registering sysdev class 'machinecheck'
[    5.336048] Registering sys device of class 'machinecheck'
[    5.344005] Registering sys device 'machinecheck0'
[    5.348070] Registering sys device of class 'machinecheck'
[    5.352005] Registering sys device 'machinecheck1'
[    5.356067] device: 'mcelog': device_add
[    5.360017] PM: Adding info for No Bus:mcelog
[    5.364050] initcall mcheck_init_device+0x0/0xf5 returned 0 after 35156 usecs
[    5.372006] calling  inject_init+0x0/0x25 @ 1
[    5.376002] Machine check injector initialized
[    5.380039] initcall inject_init+0x0/0x25 returned 0 after 3906 usecs
[    5.388004] calling  powernow_k6_init+0x0/0x85 @ 1
[    5.392004] initcall powernow_k6_init+0x0/0x85 returned -19 after 0 usecs
[    5.400003] calling  longrun_init+0x0/0x2d @ 1
[    5.404003] initcall longrun_init+0x0/0x2d returned -19 after 0 usecs
[    5.412003] calling  cpufreq_gx_init+0x0/0x18d @ 1
[    5.416004] initcall cpufreq_gx_init+0x0/0x18d returned -19 after 0 usecs
[    5.424003] calling  nforce2_init+0x0/0x5e @ 1
[    5.428010] cpufreq-nforce2: No nForce2 chipset.
[    5.432003] initcall nforce2_init+0x0/0x5e returned -19 after 3906 usecs
[    5.440003] calling  msr_init+0x0/0x15a @ 1
[    5.444008] device class 'msr': registering
[    5.448068] device: 'msr0': device_add
[    5.452014] PM: Adding info for No Bus:msr0
[    5.456054] device: 'msr1': device_add
[    5.460014] PM: Adding info for No Bus:msr1
[    5.464052] initcall msr_init+0x0/0x15a returned 0 after 19531 usecs
[    5.468004] calling  ioapic_init_sysfs+0x0/0x84 @ 1
[    5.472002] Registering sysdev class 'ioapic'
[    5.480058] Registering sys device of class 'ioapic'
[    5.484005] Registering sys device 'ioapic0'
[    5.488046] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 15625 usecs
[    5.496003] calling  add_pcspkr+0x0/0x24 @ 1
[    5.500006] Registering platform device 'pcspkr'. Parent at platform
[    5.504003] device: 'pcspkr': device_add
[    5.508005] bus: 'platform': add device pcspkr
[    5.512012] PM: Adding info for platform:pcspkr
[    5.520049] initcall add_pcspkr+0x0/0x24 returned 0 after 19531 usecs
[    5.524003] calling  scx200_init+0x0/0x20 @ 1
[    5.528001] scx200: NatSemi SCx200 Driver
[    5.532003] bus: 'pci': add driver scx200
[    5.536063] initcall scx200_init+0x0/0x20 returned 0 after 7812 usecs
[    5.544003] calling  microcode_init+0x0/0xf7 @ 1
[    5.548006] Registering platform device 'microcode'. Parent at platform
[    5.556003] device: 'microcode': device_add
[    5.560005] bus: 'platform': add device microcode
[    5.564012] PM: Adding info for platform:microcode
[    5.568002] microcode: microcode: CPU0: AMD CPU family 0xf not supported
[    5.571997] microcode: microcode: CPU1: AMD CPU family 0xf not supported
[    5.576014] device: 'microcode': device_add
[    5.584015] PM: Adding info for No Bus:microcode
[    5.588050] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    5.596004] initcall microcode_init+0x0/0xf7 returned 0 after 46875 usecs
[    5.604004] calling  start_pageattr_test+0x0/0x27 @ 1
[    5.608042] initcall start_pageattr_test+0x0/0x27 returned 0 after 0 usecs
[    5.612004] calling  pt_dump_init+0x0/0x64 @ 1
[    5.616011] initcall pt_dump_init+0x0/0x64 returned 0 after 0 usecs
[    5.620004] calling  init_sched_debug_procfs+0x0/0x27 @ 1
[    5.624012] initcall init_sched_debug_procfs+0x0/0x27 returned 0 after 0 usecs
[    5.628003] calling  proc_schedstat_init+0x0/0x1c @ 1
[    5.632007] initcall proc_schedstat_init+0x0/0x1c returned 0 after 0 usecs
[    5.636003] calling  proc_execdomains_init+0x0/0x1c @ 1
[    5.640007] initcall proc_execdomains_init+0x0/0x1c returned 0 after 0 usecs
[    5.644003] calling  ioresources_init+0x0/0x31 @ 1
[    5.648011] initcall ioresources_init+0x0/0x31 returned 0 after 0 usecs
[    5.652003] calling  uid_cache_init+0x0/0x78 @ 1
[    5.656019] initcall uid_cache_init+0x0/0x78 returned 0 after 0 usecs
[    5.660003] calling  init_posix_timers+0x0/0x14b @ 1
[    5.664011] initcall init_posix_timers+0x0/0x14b returned 0 after 0 usecs
[    5.668003] calling  init_posix_cpu_timers+0x0/0xa2 @ 1
[    5.672003] initcall init_posix_cpu_timers+0x0/0xa2 returned 0 after 0 usecs
[    5.676003] calling  nsproxy_cache_init+0x0/0x27 @ 1
[    5.680009] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 0 usecs
[    5.684005] calling  create_proc_profile+0x0/0x201 @ 1
[    5.688003] initcall create_proc_profile+0x0/0x201 returned 0 after 0 usecs
[    5.692003] calling  timekeeping_init_device+0x0/0x1d @ 1
[    5.696002] Registering sysdev class 'timekeeping'
[    5.700063] Registering sys device of class 'timekeeping'
[    5.704005] Registering sys device 'timekeeping0'
[    5.708049] initcall timekeeping_init_device+0x0/0x1d returned 0 after 11718 usecs
[    5.712003] calling  init_clocksource_sysfs+0x0/0x43 @ 1
[    5.716002] Registering sysdev class 'clocksource'
[    5.720048] Registering sys device of class 'clocksource'
[    5.724005] Registering sys device 'clocksource0'
[    5.728050] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 11718 usecs
[    5.732004] calling  init_timer_list_procfs+0x0/0x27 @ 1
[    5.736008] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 0 usecs
[    5.740003] calling  futex_init+0x0/0x93 @ 1
[    5.744012] initcall futex_init+0x0/0x93 returned 0 after 0 usecs
[    5.748005] calling  init_rttest+0x0/0x107 @ 1
[    5.752002] Registering sysdev class 'rttest'
[    5.756062] Registering sys device of class 'rttest'
[    5.760006] Registering sys device 'rttest0'
[    5.764053] Registering sys device of class 'rttest'
[    5.768007] Registering sys device 'rttest1'
[    5.772053] Registering sys device of class 'rttest'
[    5.776017] Registering sys device 'rttest2'
[    5.780053] Registering sys device of class 'rttest'
[    5.784007] Registering sys device 'rttest3'
[    5.788052] Registering sys device of class 'rttest'
[    5.796008] Registering sys device 'rttest4'
[    5.800052] Registering sys device of class 'rttest'
[    5.804007] Registering sys device 'rttest5'
[    5.808067] Registering sys device of class 'rttest'
[    5.812007] Registering sys device 'rttest6'
[    5.816071] Registering sys device of class 'rttest'
[    5.820007] Registering sys device 'rttest7'
[    5.824050] Initializing RT-Tester: OK
[    5.828004] initcall init_rttest+0x0/0x107 returned 0 after 74218 usecs
[    5.832003] calling  proc_dma_init+0x0/0x1c @ 1
[    5.836008] initcall proc_dma_init+0x0/0x1c returned 0 after 0 usecs
[    5.840003] calling  kallsyms_init+0x0/0x1f @ 1
[    5.844007] initcall kallsyms_init+0x0/0x1f returned 0 after 0 usecs
[    5.848003] calling  snapshot_device_init+0x0/0xf @ 1
[    5.852008] device: 'snapshot': device_add
[    5.856020] PM: Adding info for No Bus:snapshot
[    5.860052] initcall snapshot_device_init+0x0/0xf returned 0 after 7812 usecs
[    5.864004] calling  crash_save_vmcoreinfo_init+0x0/0x37b @ 1
[    5.868028] initcall crash_save_vmcoreinfo_init+0x0/0x37b returned 0 after 0 usecs
[    5.872003] calling  crash_notes_memory_init+0x0/0x31 @ 1
[    5.876006] initcall crash_notes_memory_init+0x0/0x31 returned 0 after 0 usecs
[    5.880003] calling  hung_task_init+0x0/0x42 @ 1
[    5.884025] initcall hung_task_init+0x0/0x42 returned 0 after 0 usecs
[    5.888004] calling  rcuclassic_trace_init+0x0/0xdb @ 1
[    5.892041] initcall rcuclassic_trace_init+0x0/0xdb returned 0 after 0 usecs
[    5.900003] calling  init_lstats_procfs+0x0/0x1f @ 1
[    5.904014] initcall init_lstats_procfs+0x0/0x1f returned 0 after 0 usecs
[    5.912003] calling  init_events+0x0/0x48 @ 1
[    5.916010] initcall init_events+0x0/0x48 returned 0 after 0 usecs
[    5.924003] calling  init_sched_switch_trace+0x0/0xf @ 1
[    5.936006] Testing tracer sched_switch: PASSED
[    6.072716] initcall init_sched_switch_trace+0x0/0xf returned 0 after 140625 usecs
[    6.080003] calling  init_stack_trace+0x0/0xf @ 1
[    6.092003] Testing tracer sysprof: .. no entries found ..FAILED!
[    6.206858] initcall init_stack_trace+0x0/0xf returned -1 after 117187 usecs
[    6.212003] initcall init_stack_trace+0x0/0xf returned with error code -1 
[    6.220003] calling  init_irqsoff_tracer+0x0/0x11 @ 1
[    6.236005] Testing tracer irqsoff: PASSED
[    6.260721] initcall init_irqsoff_tracer+0x0/0x11 returned 0 after 35156 usecs
[    6.268003] calling  init_wakeup_tracer+0x0/0x1d @ 1
[    6.280003] Testing tracer wakeup: 
[    6.616014] ftrace-test used greatest stack depth: 3388 bytes left
[    6.628004] PASSED
[    6.640004] Testing tracer wakeup_rt: PASSED
[    6.984717] initcall init_wakeup_tracer+0x0/0x1d returned 0 after 695312 usecs
[    6.992003] calling  init_ksym_trace+0x0/0x2c @ 1
[    7.008004] Testing tracer ksym_tracer: PASSED
[    7.060719] initcall init_ksym_trace+0x0/0x2c returned 0 after 62500 usecs
[    7.064003] calling  perf_event_sysfs_init+0x0/0x14 @ 1
[    7.072010] initcall perf_event_sysfs_init+0x0/0x14 returned 0 after 0 usecs
[    7.076003] calling  init_per_zone_wmark_min+0x0/0x59 @ 1
[    7.084047] initcall init_per_zone_wmark_min+0x0/0x59 returned 0 after 0 usecs
[    7.092003] calling  kswapd_init+0x0/0x1d @ 1
[    7.096048] initcall kswapd_init+0x0/0x1d returned 0 after 0 usecs
[    7.100003] calling  setup_vmstat+0x0/0xc2 @ 1
[    7.104027] initcall setup_vmstat+0x0/0xc2 returned 0 after 0 usecs
[    7.108003] calling  mm_sysfs_init+0x0/0x22 @ 1
[    7.112009] initcall mm_sysfs_init+0x0/0x22 returned 0 after 0 usecs
[    7.116003] calling  proc_vmalloc_init+0x0/0x1f @ 1
[    7.120007] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 0 usecs
[    7.124003] calling  init_emergency_pool+0x0/0x6b @ 1
[    7.128005] initcall init_emergency_pool+0x0/0x6b returned 0 after 0 usecs
[    7.132003] calling  procswaps_init+0x0/0x1c @ 1
[    7.136016] initcall procswaps_init+0x0/0x1c returned 0 after 0 usecs
[    7.140003] calling  hugetlb_init+0x0/0x32e @ 1
[    7.144003] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    7.148027] initcall hugetlb_init+0x0/0x32e returned 0 after 3906 usecs
[    7.152003] calling  ksm_init+0x0/0x1a5 @ 1
[    7.156049] initcall ksm_init+0x0/0x1a5 returned 0 after 0 usecs
[    7.160004] calling  slab_proc_init+0x0/0x1f @ 1
[    7.164010] initcall slab_proc_init+0x0/0x1f returned 0 after 0 usecs
[    7.172003] calling  slab_sysfs_init+0x0/0xb7 @ 1
[    7.191052] initcall slab_sysfs_init+0x0/0xb7 returned 0 after 11718 usecs
[    7.196009] calling  fasync_init+0x0/0x24 @ 1
[    7.200143] initcall fasync_init+0x0/0x24 returned 0 after 0 usecs
[    7.208003] calling  proc_filesystems_init+0x0/0x1c @ 1
[    7.212012] initcall proc_filesystems_init+0x0/0x1c returned 0 after 0 usecs
[    7.220003] calling  inotify_user_setup+0x0/0x65 @ 1
[    7.224281] initcall inotify_user_setup+0x0/0x65 returned 0 after 0 usecs
[    7.232003] calling  proc_locks_init+0x0/0x1c @ 1
[    7.236009] initcall proc_locks_init+0x0/0x1c returned 0 after 0 usecs
[    7.244006] calling  init_mbcache+0x0/0x11 @ 1
[    7.248003] initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs
[    7.252003] calling  quota_init+0x0/0x20 @ 1
[    7.256046] initcall quota_init+0x0/0x20 returned 0 after 0 usecs
[    7.264003] calling  proc_cmdline_init+0x0/0x1c @ 1
[    7.268008] initcall proc_cmdline_init+0x0/0x1c returned 0 after 0 usecs
[    7.276003] calling  proc_cpuinfo_init+0x0/0x1c @ 1
[    7.280008] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 0 usecs
[    7.288003] calling  proc_devices_init+0x0/0x1c @ 1
[    7.292008] initcall proc_devices_init+0x0/0x1c returned 0 after 0 usecs
[    7.300003] calling  proc_interrupts_init+0x0/0x1c @ 1
[    7.304008] initcall proc_interrupts_init+0x0/0x1c returned 0 after 0 usecs
[    7.312003] calling  proc_loadavg_init+0x0/0x1c @ 1
[    7.316008] initcall proc_loadavg_init+0x0/0x1c returned 0 after 0 usecs
[    7.320003] calling  proc_meminfo_init+0x0/0x1c @ 1
[    7.328008] initcall proc_meminfo_init+0x0/0x1c returned 0 after 0 usecs
[    7.332003] calling  proc_stat_init+0x0/0x1c @ 1
[    7.336008] initcall proc_stat_init+0x0/0x1c returned 0 after 0 usecs
[    7.344003] calling  proc_uptime_init+0x0/0x1c @ 1
[    7.348008] initcall proc_uptime_init+0x0/0x1c returned 0 after 0 usecs
[    7.356003] calling  proc_version_init+0x0/0x1c @ 1
[    7.360008] initcall proc_version_init+0x0/0x1c returned 0 after 0 usecs
[    7.368003] calling  proc_softirqs_init+0x0/0x1c @ 1
[    7.372008] initcall proc_softirqs_init+0x0/0x1c returned 0 after 0 usecs
[    7.380003] calling  proc_kcore_init+0x0/0x78 @ 1
[    7.384011] initcall proc_kcore_init+0x0/0x78 returned 0 after 0 usecs
[    7.392004] calling  vmcore_init+0x0/0x341 @ 1
[    7.396004] initcall vmcore_init+0x0/0x341 returned 0 after 0 usecs
[    7.400003] calling  proc_kmsg_init+0x0/0x1f @ 1
[    7.404008] initcall proc_kmsg_init+0x0/0x1f returned 0 after 0 usecs
[    7.412003] calling  proc_page_init+0x0/0x37 @ 1
[    7.416013] initcall proc_page_init+0x0/0x37 returned 0 after 0 usecs
[    7.424003] calling  configfs_init+0x0/0xbb @ 1
[    7.428155] initcall configfs_init+0x0/0xbb returned 0 after 0 usecs
[    7.436003] calling  init_devpts_fs+0x0/0x3d @ 1
[    7.440039] initcall init_devpts_fs+0x0/0x3d returned 0 after 0 usecs
[    7.444003] calling  init_dlm+0x0/0x8f @ 1
[    7.448209] device: 'dlm-control': device_add
[    7.456023] PM: Adding info for No Bus:dlm-control
[    7.460055] device: 'dlm-monitor': device_add
[    7.464015] PM: Adding info for No Bus:dlm-monitor
[    7.468089] device: 'dlm_plock': device_add
[    7.472014] PM: Adding info for No Bus:dlm_plock
[    7.476047] DLM (built Jun 11 2010 12:25:50) installed
[    7.484004] initcall init_dlm+0x0/0x8f returned 0 after 35156 usecs
[    7.488003] calling  init_ext3_fs+0x0/0x64 @ 1
[    7.492328] initcall init_ext3_fs+0x0/0x64 returned 0 after 0 usecs
[    7.500005] calling  init_ext2_fs+0x0/0x64 @ 1
[    7.504275] initcall init_ext2_fs+0x0/0x64 returned 0 after 0 usecs
[    7.512004] calling  init_ext4_fs+0x0/0xca @ 1
[    7.516860] initcall init_ext4_fs+0x0/0xca returned 0 after 0 usecs
[    7.524004] calling  journal_init+0x0/0xab @ 1
[    7.528565] initcall journal_init+0x0/0xab returned 0 after 0 usecs
[    7.532004] calling  journal_init+0x0/0xbe @ 1
[    7.540208] initcall journal_init+0x0/0xbe returned 0 after 3906 usecs
[    7.544004] calling  init_cramfs_fs+0x0/0x2a @ 1
[    7.548037] initcall init_cramfs_fs+0x0/0x2a returned 0 after 0 usecs
[    7.556003] calling  init_squashfs_fs+0x0/0x5d @ 1
[    7.560147] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    7.568004] initcall init_squashfs_fs+0x0/0x5d returned 0 after 7812 usecs
[    7.572003] calling  init_ramfs_fs+0x0/0xf @ 1
[    7.580004] initcall init_ramfs_fs+0x0/0xf returned 0 after 0 usecs
[    7.584003] calling  init_hugetlbfs_fs+0x0/0x82 @ 1
[    7.588189] initcall init_hugetlbfs_fs+0x0/0x82 returned 0 after 0 usecs
[    7.596004] calling  init_minix_fs+0x0/0x54 @ 1
[    7.600141] initcall init_minix_fs+0x0/0x54 returned 0 after 0 usecs
[    7.608003] calling  init_fat_fs+0x0/0x46 @ 1
[    7.612301] initcall init_fat_fs+0x0/0x46 returned 0 after 0 usecs
[    7.616004] calling  init_vfat_fs+0x0/0xf @ 1
[    7.624005] initcall init_vfat_fs+0x0/0xf returned 0 after 0 usecs
[    7.628003] calling  init_msdos_fs+0x0/0xf @ 1
[    7.632004] initcall init_msdos_fs+0x0/0xf returned 0 after 0 usecs
[    7.640003] calling  init_bfs_fs+0x0/0x54 @ 1
[    7.644136] initcall init_bfs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.648004] calling  init_iso9660_fs+0x0/0x64 @ 1
[    7.656200] initcall init_iso9660_fs+0x0/0x64 returned 0 after 0 usecs
[    7.660004] calling  init_hfs_fs+0x0/0x50 @ 1
[    7.664146] initcall init_hfs_fs+0x0/0x50 returned 0 after 0 usecs
[    7.672004] calling  ecryptfs_init+0x0/0x194 @ 1
[    7.680242] device: 'ecryptfs': device_add
[    7.684019] PM: Adding info for No Bus:ecryptfs
[    7.688055] initcall ecryptfs_init+0x0/0x194 returned 0 after 11718 usecs
[    7.692003] calling  vxfs_init+0x0/0x4d @ 1
[    7.696175] initcall vxfs_init+0x0/0x4d returned 0 after 0 usecs
[    7.700004] calling  init_nls_cp437+0x0/0xf @ 1
[    7.704004] initcall init_nls_cp437+0x0/0xf returned 0 after 0 usecs
[    7.708003] calling  init_nls_cp737+0x0/0xf @ 1
[    7.712003] initcall init_nls_cp737+0x0/0xf returned 0 after 0 usecs
[    7.716003] calling  init_nls_cp850+0x0/0xf @ 1
[    7.720003] initcall init_nls_cp850+0x0/0xf returned 0 after 0 usecs
[    7.724003] calling  init_nls_cp852+0x0/0xf @ 1
[    7.728003] initcall init_nls_cp852+0x0/0xf returned 0 after 0 usecs
[    7.732003] calling  init_nls_cp857+0x0/0xf @ 1
[    7.736003] initcall init_nls_cp857+0x0/0xf returned 0 after 0 usecs
[    7.740003] calling  init_nls_cp861+0x0/0xf @ 1
[    7.744003] initcall init_nls_cp861+0x0/0xf returned 0 after 0 usecs
[    7.748003] calling  init_nls_cp863+0x0/0xf @ 1
[    7.752003] initcall init_nls_cp863+0x0/0xf returned 0 after 0 usecs
[    7.756003] calling  init_nls_cp864+0x0/0xf @ 1
[    7.760003] initcall init_nls_cp864+0x0/0xf returned 0 after 0 usecs
[    7.764003] calling  init_nls_cp865+0x0/0xf @ 1
[    7.768003] initcall init_nls_cp865+0x0/0xf returned 0 after 0 usecs
[    7.772003] calling  init_nls_cp874+0x0/0xf @ 1
[    7.776003] initcall init_nls_cp874+0x0/0xf returned 0 after 0 usecs
[    7.780003] calling  init_nls_cp936+0x0/0xf @ 1
[    7.784003] initcall init_nls_cp936+0x0/0xf returned 0 after 0 usecs
[    7.788003] calling  init_nls_cp950+0x0/0xf @ 1
[    7.792003] initcall init_nls_cp950+0x0/0xf returned 0 after 0 usecs
[    7.796003] calling  init_nls_cp1250+0x0/0xf @ 1
[    7.800003] initcall init_nls_cp1250+0x0/0xf returned 0 after 0 usecs
[    7.804003] calling  init_nls_cp1251+0x0/0xf @ 1
[    7.808003] initcall init_nls_cp1251+0x0/0xf returned 0 after 0 usecs
[    7.812003] calling  init_nls_iso8859_1+0x0/0xf @ 1
[    7.816004] initcall init_nls_iso8859_1+0x0/0xf returned 0 after 0 usecs
[    7.820003] calling  init_nls_iso8859_3+0x0/0xf @ 1
[    7.824003] initcall init_nls_iso8859_3+0x0/0xf returned 0 after 0 usecs
[    7.828003] calling  init_nls_iso8859_4+0x0/0xf @ 1
[    7.832004] initcall init_nls_iso8859_4+0x0/0xf returned 0 after 0 usecs
[    7.836003] calling  init_nls_iso8859_5+0x0/0xf @ 1
[    7.840003] initcall init_nls_iso8859_5+0x0/0xf returned 0 after 0 usecs
[    7.844004] calling  init_nls_iso8859_6+0x0/0xf @ 1
[    7.848004] initcall init_nls_iso8859_6+0x0/0xf returned 0 after 0 usecs
[    7.852003] calling  init_nls_iso8859_7+0x0/0xf @ 1
[    7.856004] initcall init_nls_iso8859_7+0x0/0xf returned 0 after 0 usecs
[    7.860003] calling  init_nls_cp1255+0x0/0xf @ 1
[    7.864004] initcall init_nls_cp1255+0x0/0xf returned 0 after 0 usecs
[    7.868003] calling  init_nls_iso8859_9+0x0/0xf @ 1
[    7.872004] initcall init_nls_iso8859_9+0x0/0xf returned 0 after 0 usecs
[    7.876003] calling  init_nls_iso8859_13+0x0/0xf @ 1
[    7.880004] initcall init_nls_iso8859_13+0x0/0xf returned 0 after 0 usecs
[    7.884003] calling  init_nls_iso8859_15+0x0/0xf @ 1
[    7.888004] initcall init_nls_iso8859_15+0x0/0xf returned 0 after 0 usecs
[    7.892003] calling  init_hpfs_fs+0x0/0x54 @ 1
[    7.896149] initcall init_hpfs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.900004] calling  init_ntfs_fs+0x0/0x1d3 @ 1
[    7.904001] NTFS driver 2.1.29 [Flags: R/W DEBUG].
[    7.908734] initcall init_ntfs_fs+0x0/0x1d3 returned 0 after 3906 usecs
[    7.912004] calling  init_ufs_fs+0x0/0x54 @ 1
[    7.916137] initcall init_ufs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.920004] calling  logfs_init+0x0/0x62 @ 1
[    7.924225] initcall logfs_init+0x0/0x62 returned 0 after 0 usecs
[    7.928004] calling  init_romfs_fs+0x0/0x73 @ 1
[    7.932001] ROMFS MTD (C) 2007 Red Hat, Inc.
[    7.936139] initcall init_romfs_fs+0x0/0x73 returned 0 after 3906 usecs
[    7.940004] calling  init_adfs_fs+0x0/0x54 @ 1
[    7.944138] initcall init_adfs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.948004] calling  init_udf_fs+0x0/0x54 @ 1
[    7.952139] initcall init_udf_fs+0x0/0x54 returned 0 after 0 usecs
[    7.956004] calling  init_jfs_fs+0x0/0x17c @ 1
[    7.960287] JFS: nTxBlock = 7930, nTxLock = 63443
[    7.970162] initcall init_jfs_fs+0x0/0x17c returned 0 after 7812 usecs
[    7.972005] calling  init_xfs_fs+0x0/0x99 @ 1
[    7.976002] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled
[    7.984830] SGI XFS Quota Management subsystem
[    7.988019] initcall init_xfs_fs+0x0/0x99 returned 0 after 11718 usecs
[    7.996004] calling  init_nilfs_fs+0x0/0xc8 @ 1
[    8.000571] NILFS version 2 loaded
[    8.004005] initcall init_nilfs_fs+0x0/0xc8 returned 0 after 3906 usecs
[    8.008003] calling  init_befs_fs+0x0/0x6d @ 1
[    8.016002] BeFS version: 0.9.3
[    8.019281] initcall init_befs_fs+0x0/0x6d returned 0 after 0 usecs
[    8.024004] calling  init_btrfs_fs+0x0/0x83 @ 1
[    8.029031] device: 'btrfs-control': device_add
[    8.032021] PM: Adding info for No Bus:btrfs-control
[    8.040051] Btrfs loaded
[    8.042584] initcall init_btrfs_fs+0x0/0x83 returned 0 after 11718 usecs
[    8.048004] calling  init_gfs2_fs+0x0/0x1e4 @ 1
[    8.052911] GFS2 (built Jun 11 2010 12:26:03) installed
[    8.060006] initcall init_gfs2_fs+0x0/0x1e4 returned 0 after 7812 usecs
[    8.064003] calling  ipc_init+0x0/0x2a @ 1
[    8.068017] msgmni has been set to 1982
[    8.072015] initcall ipc_init+0x0/0x2a returned 0 after 3906 usecs
[    8.080003] calling  key_proc_init+0x0/0x4e @ 1
[    8.084014] initcall key_proc_init+0x0/0x4e returned 0 after 0 usecs
[    8.092003] calling  crypto_wq_init+0x0/0x29 @ 1
[    8.096042] initcall crypto_wq_init+0x0/0x29 returned 0 after 0 usecs
[    8.100003] calling  crypto_algapi_init+0x0/0xc @ 1
[    8.108011] initcall crypto_algapi_init+0x0/0xc returned 0 after 0 usecs
[    8.112003] calling  skcipher_module_init+0x0/0x29 @ 1
[    8.120003] initcall skcipher_module_init+0x0/0x29 returned 0 after 0 usecs
[    8.124003] calling  chainiv_module_init+0x0/0xf @ 1
[    8.132005] initcall chainiv_module_init+0x0/0xf returned 0 after 0 usecs
[    8.136003] calling  eseqiv_module_init+0x0/0xf @ 1
[    8.144003] initcall eseqiv_module_init+0x0/0xf returned 0 after 0 usecs
[    8.148003] calling  seqiv_module_init+0x0/0xf @ 1
[    8.152003] initcall seqiv_module_init+0x0/0xf returned 0 after 0 usecs
[    8.160003] calling  hmac_module_init+0x0/0xf @ 1
[    8.164003] initcall hmac_module_init+0x0/0xf returned 0 after 0 usecs
[    8.172003] calling  vmac_module_init+0x0/0xf @ 1
[    8.176003] initcall vmac_module_init+0x0/0xf returned 0 after 0 usecs
[    8.184003] calling  crypto_xcbc_module_init+0x0/0xf @ 1
[    8.188003] initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.196003] calling  md4_mod_init+0x0/0xf @ 1
[    8.200082] initcall md4_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.200090] cryptomgr_test used greatest stack depth: 2988 bytes left
[    8.204004] calling  md5_mod_init+0x0/0xf @ 1
[    8.208073] initcall md5_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.216008] calling  rmd128_mod_init+0x0/0xf @ 1
[    8.220073] initcall rmd128_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.224029] calling  rmd256_mod_init+0x0/0xf @ 1
[    8.228070] initcall rmd256_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.232027] calling  sha1_generic_mod_init+0x0/0xf @ 1
[    8.240060] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.240073] cryptomgr_test used greatest stack depth: 2816 bytes left
[    8.244030] calling  sha256_generic_mod_init+0x0/0x33 @ 1
[    8.248085] initcall sha256_generic_mod_init+0x0/0x33 returned 0 after 0 usecs
[    8.256029] calling  sha512_generic_mod_init+0x0/0x33 @ 1
[    8.264113] cryptomgr_test used greatest stack depth: 2692 bytes left
[    8.271099] initcall sha512_generic_mod_init+0x0/0x33 returned 0 after 3906 usecs
[    8.272051] calling  wp512_mod_init+0x0/0x52 @ 1
[    8.276196] initcall wp512_mod_init+0x0/0x52 returned 0 after 0 usecs
[    8.284008] calling  tgr192_mod_init+0x0/0x52 @ 1
[    8.288106] initcall tgr192_mod_init+0x0/0x52 returned 0 after 0 usecs
[    8.292093] calling  crypto_ecb_module_init+0x0/0xf @ 1
[    8.296004] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 0 usecs
[    8.300003] calling  crypto_cbc_module_init+0x0/0xf @ 1
[    8.304004] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.308003] calling  crypto_pcbc_module_init+0x0/0xf @ 1
[    8.312003] initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.316003] calling  crypto_module_init+0x0/0xf @ 1
[    8.320004] initcall crypto_module_init+0x0/0xf returned 0 after 0 usecs
[    8.324014] calling  crypto_ctr_module_init+0x0/0x35 @ 1
[    8.328003] initcall crypto_ctr_module_init+0x0/0x35 returned 0 after 0 usecs
[    8.332003] calling  crypto_gcm_module_init+0x0/0xd0 @ 1
[    8.336005] initcall crypto_gcm_module_init+0x0/0xd0 returned 0 after 0 usecs
[    8.340003] calling  crypto_ccm_module_init+0x0/0x4f @ 1
[    8.344004] initcall crypto_ccm_module_init+0x0/0x4f returned 0 after 0 usecs
[    8.348003] calling  pcrypt_init+0x0/0xc9 @ 1
[    8.352053] initcall pcrypt_init+0x0/0xc9 returned 0 after 0 usecs
[    8.356005] calling  cryptd_init+0x0/0xc8 @ 1
[    8.360008] initcall cryptd_init+0x0/0xc8 returned 0 after 0 usecs
[    8.368006] calling  des_generic_mod_init+0x0/0x33 @ 1
[    8.372081] initcall des_generic_mod_init+0x0/0x33 returned 0 after 0 usecs
[    8.376004] calling  fcrypt_mod_init+0x0/0xf @ 1
[    8.380043] alg: No test for fcrypt (fcrypt-generic)
[    8.384008] initcall fcrypt_mod_init+0x0/0xf returned 0 after 3906 usecs
[    8.392048] calling  blowfish_mod_init+0x0/0xf @ 1
[    8.396723] initcall blowfish_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.400005] calling  twofish_mod_init+0x0/0xf @ 1
[    8.404205] initcall twofish_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.412030] calling  serpent_mod_init+0x0/0x33 @ 1
[    8.416098] initcall serpent_mod_init+0x0/0x33 returned 0 after 0 usecs
[    8.420028] calling  aes_init+0x0/0xf @ 1
[    8.424087] initcall aes_init+0x0/0xf returned 0 after 0 usecs
[    8.428052] calling  camellia_init+0x0/0xf @ 1
[    8.436076] initcall camellia_init+0x0/0xf returned 0 after 0 usecs
[    8.440028] calling  cast5_mod_init+0x0/0xf @ 1
[    8.444067] initcall cast5_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.452031] calling  arc4_init+0x0/0xf @ 1
[    8.456081] initcall arc4_init+0x0/0xf returned 0 after 0 usecs
[    8.460029] calling  tea_mod_init+0x0/0x52 @ 1
[    8.464074] initcall tea_mod_init+0x0/0x52 returned 0 after 0 usecs
[    8.468031] calling  khazad_mod_init+0x0/0xf @ 1
[    8.472082] initcall khazad_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.476070] calling  anubis_mod_init+0x0/0xf @ 1
[    8.480121] initcall anubis_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.488033] calling  seed_init+0x0/0xf @ 1
[    8.492067] initcall seed_init+0x0/0xf returned 0 after 0 usecs
[    8.496033] calling  salsa20_generic_mod_init+0x0/0xf @ 1
[    8.500046] initcall salsa20_generic_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.508031] calling  deflate_mod_init+0x0/0xf @ 1
[    8.512612] initcall deflate_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.516032] calling  zlib_mod_init+0x0/0xf @ 1
[    8.520962] initcall zlib_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.520980] cryptomgr_test used greatest stack depth: 2664 bytes left
[    8.532034] calling  crc32c_mod_init+0x0/0xf @ 1
[    8.536115] initcall crc32c_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.540035] calling  crypto_authenc_module_init+0x0/0xf @ 1
[    8.544005] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.548003] calling  lzo_mod_init+0x0/0xf @ 1
[    8.552072] initcall lzo_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.560032] calling  krng_mod_init+0x0/0xf @ 1
[    8.564045] alg: No test for stdrng (krng)
[    8.568008] initcall krng_mod_init+0x0/0xf returned 0 after 3906 usecs
[    8.572029] calling  prng_mod_init+0x0/0x1d @ 1
[    8.587720] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    8.588008] initcall prng_mod_init+0x0/0x1d returned 0 after 11718 usecs
[    8.596026] calling  ghash_mod_init+0x0/0xf @ 1
[    8.600125] initcall ghash_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.604025] calling  async_pq_init+0x0/0x3c @ 1
[    8.608005] initcall async_pq_init+0x0/0x3c returned 0 after 0 usecs
[    8.612003] calling  proc_genhd_init+0x0/0x31 @ 1
[    8.616023] initcall proc_genhd_init+0x0/0x31 returned 0 after 0 usecs
[    8.620027] calling  init_cgroup_blkio+0x0/0xf @ 1
[    8.624004] initcall init_cgroup_blkio+0x0/0xf returned 0 after 0 usecs
[    8.628003] calling  noop_init+0x0/0x11 @ 1
[    8.632002] io scheduler noop registered
[    8.636003] initcall noop_init+0x0/0x11 returned 0 after 3906 usecs
[    8.640003] calling  cfq_init+0x0/0x93 @ 1
[    8.644342] io scheduler cfq registered (default)
[    8.648007] initcall cfq_init+0x0/0x93 returned 0 after 3906 usecs
[    8.652003] calling  btree_module_init+0x0/0x24 @ 1
[    8.656161] initcall btree_module_init+0x0/0x24 returned 0 after 0 usecs
[    8.660003] calling  debug_objects_init_debugfs+0x0/0x57 @ 1
[    8.664033] initcall debug_objects_init_debugfs+0x0/0x57 returned 0 after 0 usecs
[    8.668006] calling  libcrc32c_mod_init+0x0/0x25 @ 1
[    8.672009] initcall libcrc32c_mod_init+0x0/0x25 returned 0 after 0 usecs
[    8.676003] calling  percpu_counter_startup+0x0/0x16 @ 1
[    8.680006] initcall percpu_counter_startup+0x0/0x16 returned 0 after 0 usecs
[    8.684007] calling  err_inject_init+0x0/0x19 @ 1
[    8.688003] initcall err_inject_init+0x0/0x19 returned 0 after 0 usecs
[    8.692003] calling  dynamic_debug_init+0x0/0xf9 @ 1
[    8.696480] initcall dynamic_debug_init+0x0/0xf9 returned 0 after 0 usecs
[    8.700006] calling  adp5588_gpio_init+0x0/0x11 @ 1
[    8.704005] bus: 'i2c': add driver adp5588-gpio
[    8.708068] i2c-core: driver [adp5588-gpio] registered
[    8.712005] initcall adp5588_gpio_init+0x0/0x11 returned 0 after 7812 usecs
[    8.716004] calling  lnw_gpio_init+0x0/0x16 @ 1
[    8.720003] bus: 'pci': add driver langwell_gpio
[    8.724064] initcall lnw_gpio_init+0x0/0x16 returned 0 after 3906 usecs
[    8.728003] calling  bt8xxgpio_init+0x0/0x16 @ 1
[    8.732002] bus: 'pci': add driver bt8xxgpio
[    8.736059] initcall bt8xxgpio_init+0x0/0x16 returned 0 after 3906 usecs
[    8.740003] calling  it8761e_gpio_init+0x0/0x178 @ 1
[    8.744037] initcall it8761e_gpio_init+0x0/0x178 returned -19 after 0 usecs
[    8.748003] calling  sch_gpio_init+0x0/0xf @ 1
[    8.752004] bus: 'platform': add driver sch_gpio
[    8.756057] initcall sch_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    8.760003] calling  rdc321x_gpio_init+0x0/0xf @ 1
[    8.764002] bus: 'platform': add driver rdc321x-gpio
[    8.768056] initcall rdc321x_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    8.772003] calling  pci_proc_init+0x0/0x5b @ 1
[    8.776163] initcall pci_proc_init+0x0/0x5b returned 0 after 0 usecs
[    8.780003] calling  pcie_portdrv_init+0x0/0x4b @ 1
[    8.784066] bus: 'pci_express': registered
[    8.788002] bus: 'pci': add driver pcieport
[    8.792011] bus: 'pci': driver_probe_device: matched device 0000:00:0b.0 with driver pcieport
[    8.796002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0b.0
[    8.800028] pcieport 0000:00:0b.0: setting latency timer to 64
[    8.804153] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    8.808027] device: '0000:00:0b.0:pcie01': device_add
[    8.812007] bus: 'pci_express': add device 0000:00:0b.0:pcie01
[    8.816025] PM: Adding info for pci_express:0000:00:0b.0:pcie01
[    8.820174] driver: '0000:00:0b.0': driver_bound: bound to device 'pcieport'
[    8.824003] bus: 'pci': really_probe: bound device 0000:00:0b.0 to driver pcieport
[    8.828003] bus: 'pci': driver_probe_device: matched device 0000:00:0c.0 with driver pcieport
[    8.832002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0c.0
[    8.836024] pcieport 0000:00:0c.0: setting latency timer to 64
[    8.840147] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    8.844025] device: '0000:00:0c.0:pcie01': device_add
[    8.848006] bus: 'pci_express': add device 0000:00:0c.0:pcie01
[    8.852020] PM: Adding info for pci_express:0000:00:0c.0:pcie01
[    8.856171] driver: '0000:00:0c.0': driver_bound: bound to device 'pcieport'
[    8.860002] bus: 'pci': really_probe: bound device 0000:00:0c.0 to driver pcieport
[    8.864003] bus: 'pci': driver_probe_device: matched device 0000:00:0d.0 with driver pcieport
[    8.868002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0d.0
[    8.872024] pcieport 0000:00:0d.0: setting latency timer to 64
[    8.876147] pcieport 0000:00:0d.0: irq 43 for MSI/MSI-X
[    8.880025] device: '0000:00:0d.0:pcie01': device_add
[    8.884006] bus: 'pci_express': add device 0000:00:0d.0:pcie01
[    8.888011] PM: Adding info for pci_express:0000:00:0d.0:pcie01
[    8.892171] driver: '0000:00:0d.0': driver_bound: bound to device 'pcieport'
[    8.896002] bus: 'pci': really_probe: bound device 0000:00:0d.0 to driver pcieport
[    8.900003] bus: 'pci': driver_probe_device: matched device 0000:00:0e.0 with driver pcieport
[    8.904002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0e.0
[    8.908024] pcieport 0000:00:0e.0: setting latency timer to 64
[    8.912146] pcieport 0000:00:0e.0: irq 44 for MSI/MSI-X
[    8.916025] device: '0000:00:0e.0:pcie01': device_add
[    8.920015] bus: 'pci_express': add device 0000:00:0e.0:pcie01
[    8.924011] PM: Adding info for pci_express:0000:00:0e.0:pcie01
[    8.928171] driver: '0000:00:0e.0': driver_bound: bound to device 'pcieport'
[    8.932002] bus: 'pci': really_probe: bound device 0000:00:0e.0 to driver pcieport
[    8.936056] initcall pcie_portdrv_init+0x0/0x4b returned 0 after 148437 usecs
[    8.940003] calling  pci_hotplug_init+0x0/0x41 @ 1
[    8.944002] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.948003] initcall pci_hotplug_init+0x0/0x41 returned 0 after 3906 usecs
[    8.952003] calling  cpqhpc_init+0x0/0x5a @ 1
[    8.956002] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
[    8.960020] bus: 'pci': add driver compaq_pci_hotplug
[    8.964063] initcall cpqhpc_init+0x0/0x5a returned 0 after 7812 usecs
[    8.968003] calling  pcied_init+0x0/0x62 @ 1
[    8.972002] bus: 'pci_express': add driver pciehp
[    8.976054] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    8.980003] initcall pcied_init+0x0/0x62 returned 0 after 7812 usecs
[    8.984003] calling  zt5550_init+0x0/0x6c @ 1
[    8.988002] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[    8.992004] bus: 'pci': add driver zt5550_hc
[    8.996070] initcall zt5550_init+0x0/0x6c returned 0 after 7812 usecs
[    9.000004] calling  cpcihp_generic_init+0x0/0x3b0 @ 1
[    9.004002] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[    9.008002] cpcihp_generic: not configured, disabling.
[    9.012003] initcall cpcihp_generic_init+0x0/0x3b0 returned -22 after 7812 usecs
[    9.016003] initcall cpcihp_generic_init+0x0/0x3b0 returned with error code -22 
[    9.020003] calling  shpcd_init+0x0/0x4e @ 1
[    9.024002] bus: 'pci': add driver shpchp
[    9.028070] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.032004] initcall shpcd_init+0x0/0x4e returned 0 after 7812 usecs
[    9.036003] calling  init_legacy+0x0/0x36 @ 1
[    9.040200] initcall init_legacy+0x0/0x36 returned 0 after 0 usecs
[    9.044003] calling  pci_stub_init+0x0/0xf2 @ 1
[    9.048004] bus: 'pci': add driver pci-stub
[    9.052061] pci-stub: invalid id string ""
[    9.056004] initcall pci_stub_init+0x0/0xf2 returned 0 after 7812 usecs
[    9.060003] calling  genericbl_init+0x0/0xf @ 1
[    9.064003] bus: 'platform': add driver generic-bl
[    9.068055] initcall genericbl_init+0x0/0xf returned 0 after 3906 usecs
[    9.072003] calling  progearbl_init+0x0/0x49 @ 1
[    9.076002] bus: 'platform': add driver progear-bl
[    9.080057] Registering platform device 'progear-bl'. Parent at platform
[    9.084003] device: 'progear-bl': device_add
[    9.088006] bus: 'platform': add device progear-bl
[    9.092013] PM: Adding info for platform:progear-bl
[    9.096053] bus: 'platform': driver_probe_device: matched device progear-bl with driver progear-bl
[    9.100002] bus: 'platform': really_probe: probing driver progear-bl with device progear-bl
[    9.104011] ALI M7101 PMU not found.
[    9.108014] initcall progearbl_init+0x0/0x49 returned 0 after 31250 usecs
[    9.112004] calling  cr_backlight_init+0x0/0x56 @ 1
[    9.116002] bus: 'platform': add driver cr_backlight
[    9.120056] Registering platform device 'cr_backlight'. Parent at platform
[    9.124003] device: 'cr_backlight': device_add
[    9.128005] bus: 'platform': add device cr_backlight
[    9.132012] PM: Adding info for platform:cr_backlight
[    9.136065] bus: 'platform': driver_probe_device: matched device cr_backlight with driver cr_backlight
[    9.140002] bus: 'platform': really_probe: probing driver cr_backlight with device cr_backlight
[    9.144011] INTEL CARILLO RANCH LPC not found.
[    9.148009] Carillo Ranch Backlight Driver Initialized.
[    9.152004] initcall cr_backlight_init+0x0/0x56 returned 0 after 35156 usecs
[    9.156003] calling  da903x_backlight_init+0x0/0xf @ 1
[    9.160003] bus: 'platform': add driver da903x-backlight
[    9.164066] initcall da903x_backlight_init+0x0/0xf returned 0 after 3906 usecs
[    9.168003] calling  adp8860_init+0x0/0x11 @ 1
[    9.172003] bus: 'i2c': add driver adp8860_bl
[    9.176054] i2c-core: driver [adp8860_bl] registered
[    9.180004] initcall adp8860_init+0x0/0x11 returned 0 after 7812 usecs
[    9.184003] calling  pm860x_backlight_init+0x0/0xf @ 1
[    9.188002] bus: 'platform': add driver 88pm860x-backlight
[    9.192056] initcall pm860x_backlight_init+0x0/0xf returned 0 after 3906 usecs
[    9.196003] calling  display_class_init+0x0/0x69 @ 1
[    9.200003] device class 'display': registering
[    9.204056] initcall display_class_init+0x0/0x69 returned 0 after 3906 usecs
[    9.208003] calling  arcfb_init+0x0/0x60 @ 1
[    9.212003] initcall arcfb_init+0x0/0x60 returned -6 after 0 usecs
[    9.216003] initcall arcfb_init+0x0/0x60 returned with error code -6 
[    9.220003] calling  cyber2000fb_init+0x0/0xac @ 1
[    9.224003] bus: 'pci': add driver CyberPro
[    9.228063] initcall cyber2000fb_init+0x0/0xac returned 0 after 3906 usecs
[    9.232004] calling  nvidiafb_init+0x0/0x26a @ 1
[    9.236002] bus: 'pci': add driver nvidiafb
[    9.240061] initcall nvidiafb_init+0x0/0x26a returned 0 after 3906 usecs
[    9.244003] calling  atyfb_init+0x0/0x1dd @ 1
[    9.248002] bus: 'pci': add driver atyfb
[    9.252065] initcall atyfb_init+0x0/0x1dd returned 0 after 3906 usecs
[    9.256003] calling  aty128fb_init+0x0/0x113 @ 1
[    9.260002] bus: 'pci': add driver aty128fb
[    9.264065] initcall aty128fb_init+0x0/0x113 returned 0 after 3906 usecs
[    9.268003] calling  sisfb_init+0x0/0x6eb @ 1
[    9.272002] bus: 'pci': add driver sisfb
[    9.276062] initcall sisfb_init+0x0/0x6eb returned 0 after 3906 usecs
[    9.280003] calling  kyrofb_init+0x0/0xc9 @ 1
[    9.284002] bus: 'pci': add driver kyrofb
[    9.288071] initcall kyrofb_init+0x0/0xc9 returned 0 after 3906 usecs
[    9.292003] calling  savagefb_init+0x0/0x60 @ 1
[    9.296003] bus: 'pci': add driver savagefb
[    9.300063] initcall savagefb_init+0x0/0x60 returned 0 after 3906 usecs
[    9.304004] calling  gx1fb_init+0x0/0x104 @ 1
[    9.308003] bus: 'pci': add driver gx1fb
[    9.312062] initcall gx1fb_init+0x0/0x104 returned 0 after 3906 usecs
[    9.316003] calling  gxfb_init+0x0/0x6c @ 1
[    9.320002] bus: 'pci': add driver gxfb
[    9.324061] initcall gxfb_init+0x0/0x6c returned 0 after 3906 usecs
[    9.328003] calling  lxfb_init+0x0/0xc9 @ 1
[    9.332002] bus: 'pci': add driver lxfb
[    9.336062] initcall lxfb_init+0x0/0xc9 returned 0 after 3906 usecs
[    9.340003] calling  neofb_init+0x0/0x12e @ 1
[    9.344002] bus: 'pci': add driver neofb
[    9.348062] initcall neofb_init+0x0/0x12e returned 0 after 3906 usecs
[    9.352003] calling  imsttfb_init+0x0/0xd6 @ 1
[    9.356002] bus: 'pci': add driver imsttfb
[    9.360062] initcall imsttfb_init+0x0/0xd6 returned 0 after 3906 usecs
[    9.364003] calling  vt8623fb_init+0x0/0x75 @ 1
[    9.368002] bus: 'pci': add driver vt8623fb
[    9.372072] initcall vt8623fb_init+0x0/0x75 returned 0 after 3906 usecs
[    9.376004] calling  tridentfb_init+0x0/0x1da @ 1
[    9.380003] bus: 'pci': add driver tridentfb
[    9.384063] initcall tridentfb_init+0x0/0x1da returned 0 after 3906 usecs
[    9.388003] calling  vmlfb_init+0x0/0x7f @ 1
[    9.392002] vmlfb: initializing
[    9.396002] bus: 'pci': add driver vmlfb
[    9.400062] initcall vmlfb_init+0x0/0x7f returned 0 after 7812 usecs
[    9.404003] calling  cr_pll_init+0x0/0xc2 @ 1
[    9.408007] Could not find Carillo Ranch MCH device.
[    9.412003] initcall cr_pll_init+0x0/0xc2 returned -19 after 3906 usecs
[    9.416003] calling  arkfb_init+0x0/0x75 @ 1
[    9.420002] bus: 'pci': add driver arkfb
[    9.424062] initcall arkfb_init+0x0/0x75 returned 0 after 3906 usecs
[    9.428003] calling  hecubafb_init+0x0/0xf @ 1
[    9.432003] bus: 'platform': add driver hecubafb
[    9.436056] initcall hecubafb_init+0x0/0xf returned 0 after 3906 usecs
[    9.440003] calling  n411_init+0x0/0x7c @ 1
[    9.444001] no IO addresses supplied
[    9.448003] initcall n411_init+0x0/0x7c returned -22 after 3906 usecs
[    9.452003] initcall n411_init+0x0/0x7c returned with error code -22 
[    9.456003] calling  hgafb_init+0x0/0x5d @ 1
[    9.460002] bus: 'platform': add driver hgafb
[    9.464058] Registering platform device 'hgafb.0'. Parent at platform
[    9.468010] device: 'hgafb.0': device_add
[    9.472006] bus: 'platform': add device hgafb.0
[    9.476022] PM: Adding info for platform:hgafb.0
[    9.480052] bus: 'platform': driver_probe_device: matched device hgafb.0 with driver hgafb
[    9.484002] bus: 'platform': really_probe: probing driver hgafb with device hgafb.0
[    9.488016] hgafb: HGA card not detected.
[    9.492008] hgafb: probe of hgafb.0 failed with error -22
[    9.496004] initcall hgafb_init+0x0/0x5d returned 0 after 35156 usecs
[    9.500003] calling  sstfb_init+0x0/0x18a @ 1
[    9.504003] bus: 'pci': add driver sstfb
[    9.508072] initcall sstfb_init+0x0/0x18a returned 0 after 3906 usecs
[    9.512004] calling  intel_idle_init+0x0/0x2f9 @ 1
[    9.516004] initcall intel_idle_init+0x0/0x2f9 returned -19 after 0 usecs
[    9.520003] calling  regulator_userspace_consumer_init+0x0/0xf @ 1
[    9.524003] bus: 'platform': add driver reg-userspace-consumer
[    9.528057] initcall regulator_userspace_consumer_init+0x0/0xf returned 0 after 3906 usecs
[    9.532003] calling  bq24022_init+0x0/0x14 @ 1
[    9.536003] bus: 'platform': add driver bq24022
[    9.540057] bus: 'platform': remove driver bq24022
[    9.544051] driver: 'bq24022': driver_release
[    9.548007] initcall bq24022_init+0x0/0x14 returned -19 after 11718 usecs
[    9.552003] calling  lp3971_module_init+0x0/0x2a @ 1
[    9.556003] bus: 'i2c': add driver LP3971
[    9.560055] i2c-core: driver [LP3971] registered
[    9.564004] initcall lp3971_module_init+0x0/0x2a returned 0 after 7812 usecs
[    9.568005] calling  rand_initialize+0x0/0x25 @ 1
[    9.572036] initcall rand_initialize+0x0/0x25 returned 0 after 0 usecs
[    9.576003] calling  tty_init+0x0/0xd5 @ 1
[    9.580010] device: 'tty': device_add
[    9.584018] PM: Adding info for No Bus:tty
[    9.588056] device: 'console': device_add
[    9.592015] PM: Adding info for No Bus:console
[    9.596061] device: 'tty0': device_add
[    9.600015] PM: Adding info for No Bus:tty0
[    9.604054] device class 'vc': registering
[    9.608067] device: 'vcs': device_add
[    9.612014] PM: Adding info for No Bus:vcs
[    9.616051] device: 'vcsa': device_add
[    9.620023] PM: Adding info for No Bus:vcsa
[    9.624052] device: 'vcs1': device_add
[    9.628014] PM: Adding info for No Bus:vcs1
[    9.632051] device: 'vcsa1': device_add
[    9.636014] PM: Adding info for No Bus:vcsa1
[    9.640059] device: 'tty1': device_add
[    9.644014] PM: Adding info for No Bus:tty1
[    9.648051] device: 'tty2': device_add
[    9.652014] PM: Adding info for No Bus:tty2
[    9.656051] device: 'tty3': device_add
[    9.660015] PM: Adding info for No Bus:tty3
[    9.664051] device: 'tty4': device_add
[    9.668024] PM: Adding info for No Bus:tty4
[    9.672052] device: 'tty5': device_add
[    9.676015] PM: Adding info for No Bus:tty5
[    9.680051] device: 'tty6': device_add
[    9.684014] PM: Adding info for No Bus:tty6
[    9.688050] device: 'tty7': device_add
[    9.692014] PM: Adding info for No Bus:tty7
[    9.696058] device: 'tty8': device_add
[    9.700015] PM: Adding info for No Bus:tty8
[    9.704051] device: 'tty9': device_add
[    9.708014] PM: Adding info for No Bus:tty9
[    9.712050] device: 'tty10': device_add
[    9.716023] PM: Adding info for No Bus:tty10
[    9.720051] device: 'tty11': device_add
[    9.724015] PM: Adding info for No Bus:tty11
[    9.728050] device: 'tty12': device_add
[    9.732015] PM: Adding info for No Bus:tty12
[    9.736058] device: 'tty13': device_add
[    9.740015] PM: Adding info for No Bus:tty13
[    9.744051] device: 'tty14': device_add
[    9.748025] PM: Adding info for No Bus:tty14
[    9.752051] device: 'tty15': device_add
[    9.755901] PM: Adding info for No Bus:tty15
[    9.756050] device: 'tty16': device_add
[    9.760024] PM: Adding info for No Bus:tty16
[    9.764051] device: 'tty17': device_add
[    9.768015] PM: Adding info for No Bus:tty17
[    9.772050] device: 'tty18': device_add
[    9.776015] PM: Adding info for No Bus:tty18
[    9.780050] device: 'tty19': device_add
[    9.784015] PM: Adding info for No Bus:tty19
[    9.788050] device: 'tty20': device_add
[    9.792015] PM: Adding info for No Bus:tty20
[    9.796057] device: 'tty21': device_add
[    9.800016] PM: Adding info for No Bus:tty21
[    9.804051] device: 'tty22': device_add
[    9.808024] PM: Adding info for No Bus:tty22
[    9.812051] device: 'tty23': device_add
[    9.816024] PM: Adding info for No Bus:tty23
[    9.820051] device: 'tty24': device_add
[    9.824015] PM: Adding info for No Bus:tty24
[    9.828050] device: 'tty25': device_add
[    9.832015] PM: Adding info for No Bus:tty25
[    9.836050] device: 'tty26': device_add
[    9.840015] PM: Adding info for No Bus:tty26
[    9.844050] device: 'tty27': device_add
[    9.848015] PM: Adding info for No Bus:tty27
[    9.852050] device: 'tty28': device_add
[    9.856025] PM: Adding info for No Bus:tty28
[    9.860051] device: 'tty29': device_add
[    9.864016] PM: Adding info for No Bus:tty29
[    9.868050] device: 'tty30': device_add
[    9.872015] PM: Adding info for No Bus:tty30
[    9.876050] device: 'tty31': device_add
[    9.880016] PM: Adding info for No Bus:tty31
[    9.884050] device: 'tty32': device_add
[    9.888016] PM: Adding info for No Bus:tty32
[    9.892060] device: 'tty33': device_add
[    9.896017] PM: Adding info for No Bus:tty33
[    9.900058] device: 'tty34': device_add
[    9.904025] PM: Adding info for No Bus:tty34
[    9.908051] device: 'tty35': device_add
[    9.912016] PM: Adding info for No Bus:tty35
[    9.916050] device: 'tty36': device_add
[    9.920016] PM: Adding info for No Bus:tty36
[    9.924050] device: 'tty37': device_add
[    9.928016] PM: Adding info for No Bus:tty37
[    9.932050] device: 'tty38': device_add
[    9.936016] PM: Adding info for No Bus:tty38
[    9.940050] device: 'tty39': device_add
[    9.943894] PM: Adding info for No Bus:tty39
[    9.944050] device: 'tty40': device_add
[    9.948025] PM: Adding info for No Bus:tty40
[    9.952059] device: 'tty41': device_add
[    9.956017] PM: Adding info for No Bus:tty41
[    9.960051] device: 'tty42': device_add
[    9.964016] PM: Adding info for No Bus:tty42
[    9.968050] device: 'tty43': device_add
[    9.972016] PM: Adding info for No Bus:tty43
[    9.976050] device: 'tty44': device_add
[    9.980016] PM: Adding info for No Bus:tty44
[    9.984050] device: 'tty45': device_add
[    9.988016] PM: Adding info for No Bus:tty45
[    9.992050] device: 'tty46': device_add
[    9.996026] PM: Adding info for No Bus:tty46
[   10.000058] device: 'tty47': device_add
[   10.004017] PM: Adding info for No Bus:tty47
[   10.008051] device: 'tty48': device_add
[   10.012016] PM: Adding info for No Bus:tty48
[   10.016050] device: 'tty49': device_add
[   10.020016] PM: Adding info for No Bus:tty49
[   10.024050] device: 'tty50': device_add
[   10.028016] PM: Adding info for No Bus:tty50
[   10.032050] device: 'tty51': device_add
[   10.036028] PM: Adding info for No Bus:tty51
[   10.040051] device: 'tty52': device_add
[   10.044044] PM: Adding info for No Bus:tty52
[   10.048051] device: 'tty53': device_add
[   10.052024] PM: Adding info for No Bus:tty53
[   10.056050] device: 'tty54': device_add
[   10.060024] PM: Adding info for No Bus:tty54
[   10.064050] device: 'tty55': device_add
[   10.068016] PM: Adding info for No Bus:tty55
[   10.072051] device: 'tty56': device_add
[   10.076016] PM: Adding info for No Bus:tty56
[   10.080050] device: 'tty57': device_add
[   10.084027] PM: Adding info for No Bus:tty57
[   10.088052] device: 'tty58': device_add
[   10.092026] PM: Adding info for No Bus:tty58
[   10.096052] device: 'tty59': device_add
[   10.100017] PM: Adding info for No Bus:tty59
[   10.104057] device: 'tty60': device_add
[   10.108018] PM: Adding info for No Bus:tty60
[   10.112051] device: 'tty61': device_add
[   10.116017] PM: Adding info for No Bus:tty61
[   10.120050] device: 'tty62': device_add
[   10.123892] PM: Adding info for No Bus:tty62
[   10.124050] device: 'tty63': device_add
[   10.128017] PM: Adding info for No Bus:tty63
[   10.132054] initcall tty_init+0x0/0xd5 returned 0 after 539062 usecs
[   10.136005] calling  pty_init+0x0/0x40e @ 1
[   10.140023] device: 'ptyp0': device_add
[   10.144026] PM: Adding info for No Bus:ptyp0
[   10.148052] device: 'ptyp1': device_add
[   10.152016] PM: Adding info for No Bus:ptyp1
[   10.156050] device: 'ptyp2': device_add
[   10.160016] PM: Adding info for No Bus:ptyp2
[   10.164050] device: 'ptyp3': device_add
[   10.168016] PM: Adding info for No Bus:ptyp3
[   10.172058] device: 'ptyp4': device_add
[   10.176017] PM: Adding info for No Bus:ptyp4
[   10.180051] device: 'ptyp5': device_add
[   10.184027] PM: Adding info for No Bus:ptyp5
[   10.192032] device: 'ptyp6': device_add
[   10.195890] PM: Adding info for No Bus:ptyp6
[   10.196051] device: 'ptyp7': device_add
[   10.200016] PM: Adding info for No Bus:ptyp7
[   10.204050] device: 'ptyp8': device_add
[   10.208016] PM: Adding info for No Bus:ptyp8
[   10.212057] device: 'ptyp9': device_add
[   10.216017] PM: Adding info for No Bus:ptyp9
[   10.220051] device: 'ptypa': device_add
[   10.224017] PM: Adding info for No Bus:ptypa
[   10.228050] device: 'ptypb': device_add
[   10.232017] PM: Adding info for No Bus:ptypb
[   10.236050] device: 'ptypc': device_add
[   10.240026] PM: Adding info for No Bus:ptypc
[   10.244052] device: 'ptypd': device_add
[   10.248017] PM: Adding info for No Bus:ptypd
[   10.252050] device: 'ptype': device_add
[   10.256017] PM: Adding info for No Bus:ptype
[   10.260050] device: 'ptypf': device_add
[   10.264017] PM: Adding info for No Bus:ptypf
[   10.268050] device: 'ptyq0': device_add
[   10.272017] PM: Adding info for No Bus:ptyq0
[   10.276050] device: 'ptyq1': device_add
[   10.280017] PM: Adding info for No Bus:ptyq1
[   10.284050] device: 'ptyq2': device_add
[   10.288026] PM: Adding info for No Bus:ptyq2
[   10.292051] device: 'ptyq3': device_add
[   10.296017] PM: Adding info for No Bus:ptyq3
[   10.300050] device: 'ptyq4': device_add
[   10.304017] PM: Adding info for No Bus:ptyq4
[   10.308050] device: 'ptyq5': device_add
[   10.312018] PM: Adding info for No Bus:ptyq5
[   10.316057] device: 'ptyq6': device_add
[   10.320019] PM: Adding info for No Bus:ptyq6
[   10.324051] device: 'ptyq7': device_add
[   10.328030] PM: Adding info for No Bus:ptyq7
[   10.332052] device: 'ptyq8': device_add
[   10.336027] PM: Adding info for No Bus:ptyq8
[   10.340051] device: 'ptyq9': device_add
[   10.344018] PM: Adding info for No Bus:ptyq9
[   10.348050] device: 'ptyqa': device_add
[   10.352018] PM: Adding info for No Bus:ptyqa
[   10.356050] device: 'ptyqb': device_add
[   10.360018] PM: Adding info for No Bus:ptyqb
[   10.364050] device: 'ptyqc': device_add
[   10.368018] PM: Adding info for No Bus:ptyqc
[   10.376006] device: 'ptyqd': device_add
[   10.379857] PM: Adding info for No Bus:ptyqd
[   10.380050] device: 'ptyqe': device_add
[   10.384027] PM: Adding info for No Bus:ptyqe
[   10.388051] device: 'ptyqf': device_add
[   10.392018] PM: Adding info for No Bus:ptyqf
[   10.396058] device: 'ptyr0': device_add
[   10.400019] PM: Adding info for No Bus:ptyr0
[   10.404051] device: 'ptyr1': device_add
[   10.408018] PM: Adding info for No Bus:ptyr1
[   10.412050] device: 'ptyr2': device_add
[   10.416019] PM: Adding info for No Bus:ptyr2
[   10.420058] device: 'ptyr3': device_add
[   10.424020] PM: Adding info for No Bus:ptyr3
[   10.428051] device: 'ptyr4': device_add
[   10.432028] PM: Adding info for No Bus:ptyr4
[   10.436052] device: 'ptyr5': device_add
[   10.440019] PM: Adding info for No Bus:ptyr5
[   10.444050] device: 'ptyr6': device_add
[   10.448019] PM: Adding info for No Bus:ptyr6
[   10.452050] device: 'ptyr7': device_add
[   10.456019] PM: Adding info for No Bus:ptyr7
[   10.460050] device: 'ptyr8': device_add
[   10.464019] PM: Adding info for No Bus:ptyr8
[   10.468050] device: 'ptyr9': device_add
[   10.472019] PM: Adding info for No Bus:ptyr9
[   10.476060] device: 'ptyra': device_add
[   10.480029] PM: Adding info for No Bus:ptyra
[   10.484052] device: 'ptyrb': device_add
[   10.488020] PM: Adding info for No Bus:ptyrb
[   10.492050] device: 'ptyrc': device_add
[   10.496020] PM: Adding info for No Bus:ptyrc
[   10.500050] device: 'ptyrd': device_add
[   10.504020] PM: Adding info for No Bus:ptyrd
[   10.508050] device: 'ptyre': device_add
[   10.512020] PM: Adding info for No Bus:ptyre
[   10.516050] device: 'ptyrf': device_add
[   10.520020] PM: Adding info for No Bus:ptyrf
[   10.524058] device: 'ptys0': device_add
[   10.528030] PM: Adding info for No Bus:ptys0
[   10.532052] device: 'ptys1': device_add
[   10.536020] PM: Adding info for No Bus:ptys1
[   10.540050] device: 'ptys2': device_add
[   10.544020] PM: Adding info for No Bus:ptys2
[   10.548050] device: 'ptys3': device_add
[   10.552020] PM: Adding info for No Bus:ptys3
[   10.556050] device: 'ptys4': device_add
[   10.559898] PM: Adding info for No Bus:ptys4
[   10.560050] device: 'ptys5': device_add
[   10.564020] PM: Adding info for No Bus:ptys5
[   10.568050] device: 'ptys6': device_add
[   10.572030] PM: Adding info for No Bus:ptys6
[   10.576051] device: 'ptys7': device_add
[   10.580021] PM: Adding info for No Bus:ptys7
[   10.584051] device: 'ptys8': device_add
[   10.588021] PM: Adding info for No Bus:ptys8
[   10.592050] device: 'ptys9': device_add
[   10.596031] PM: Adding info for No Bus:ptys9
[   10.600052] device: 'ptysa': device_add
[   10.604021] PM: Adding info for No Bus:ptysa
[   10.608050] device: 'ptysb': device_add
[   10.612021] PM: Adding info for No Bus:ptysb
[   10.616058] device: 'ptysc': device_add
[   10.620041] PM: Adding info for No Bus:ptysc
[   10.624059] device: 'ptysd': device_add
[   10.628022] PM: Adding info for No Bus:ptysd
[   10.632051] device: 'ptyse': device_add
[   10.636021] PM: Adding info for No Bus:ptyse
[   10.640050] device: 'ptysf': device_add
[   10.644021] PM: Adding info for No Bus:ptysf
[   10.648050] device: 'ptyt0': device_add
[   10.652021] PM: Adding info for No Bus:ptyt0
[   10.656050] device: 'ptyt1': device_add
[   10.660021] PM: Adding info for No Bus:ptyt1
[   10.664050] device: 'ptyt2': device_add
[   10.668031] PM: Adding info for No Bus:ptyt2
[   10.672052] device: 'ptyt3': device_add
[   10.676022] PM: Adding info for No Bus:ptyt3
[   10.680050] device: 'ptyt4': device_add
[   10.684022] PM: Adding info for No Bus:ptyt4
[   10.688050] device: 'ptyt5': device_add
[   10.692022] PM: Adding info for No Bus:ptyt5
[   10.696050] device: 'ptyt6': device_add
[   10.700022] PM: Adding info for No Bus:ptyt6
[   10.704050] device: 'ptyt7': device_add
[   10.708022] PM: Adding info for No Bus:ptyt7
[   10.712050] device: 'ptyt8': device_add
[   10.716032] PM: Adding info for No Bus:ptyt8
[   10.720052] device: 'ptyt9': device_add
[   10.724022] PM: Adding info for No Bus:ptyt9
[   10.728058] device: 'ptyta': device_add
[   10.732023] PM: Adding info for No Bus:ptyta
[   10.736051] device: 'ptytb': device_add
[   10.739898] PM: Adding info for No Bus:ptytb
[   10.740050] device: 'ptytc': device_add
[   10.744022] PM: Adding info for No Bus:ptytc
[   10.748050] device: 'ptytd': device_add
[   10.752022] PM: Adding info for No Bus:ptytd
[   10.756050] device: 'ptyte': device_add
[   10.760042] PM: Adding info for No Bus:ptyte
[   10.764052] device: 'ptytf': device_add
[   10.768023] PM: Adding info for No Bus:ptytf
[   10.772050] device: 'ptyu0': device_add
[   10.776022] PM: Adding info for No Bus:ptyu0
[   10.780050] device: 'ptyu1': device_add
[   10.784023] PM: Adding info for No Bus:ptyu1
[   10.788050] device: 'ptyu2': device_add
[   10.792023] PM: Adding info for No Bus:ptyu2
[   10.796050] device: 'ptyu3': device_add
[   10.800023] PM: Adding info for No Bus:ptyu3
[   10.804050] device: 'ptyu4': device_add
[   10.808033] PM: Adding info for No Bus:ptyu4
[   10.812052] device: 'ptyu5': device_add
[   10.816029] PM: Adding info for No Bus:ptyu5
[   10.820051] device: 'ptyu6': device_add
[   10.824023] PM: Adding info for No Bus:ptyu6
[   10.828058] device: 'ptyu7': device_add
[   10.832024] PM: Adding info for No Bus:ptyu7
[   10.836059] device: 'ptyu8': device_add
[   10.840026] PM: Adding info for No Bus:ptyu8
[   10.844051] device: 'ptyu9': device_add
[   10.848023] PM: Adding info for No Bus:ptyu9
[   10.852050] device: 'ptyua': device_add
[   10.856033] PM: Adding info for No Bus:ptyua
[   10.860052] device: 'ptyub': device_add
[   10.864023] PM: Adding info for No Bus:ptyub
[   10.868051] device: 'ptyuc': device_add
[   10.872023] PM: Adding info for No Bus:ptyuc
[   10.876050] device: 'ptyud': device_add
[   10.880024] PM: Adding info for No Bus:ptyud
[   10.884050] device: 'ptyue': device_add
[   10.888024] PM: Adding info for No Bus:ptyue
[   10.892050] device: 'ptyuf': device_add
[   10.896024] PM: Adding info for No Bus:ptyuf
[   10.900050] device: 'ptyv0': device_add
[   10.904043] PM: Adding info for No Bus:ptyv0
[   10.912031] device: 'ptyv1': device_add
[   10.915885] PM: Adding info for No Bus:ptyv1
[   10.916050] device: 'ptyv2': device_add
[   10.920024] PM: Adding info for No Bus:ptyv2
[   10.924050] device: 'ptyv3': device_add
[   10.928024] PM: Adding info for No Bus:ptyv3
[   10.932058] device: 'ptyv4': device_add
[   10.936025] PM: Adding info for No Bus:ptyv4
[   10.940051] device: 'ptyv5': device_add
[   10.944024] PM: Adding info for No Bus:ptyv5
[   10.948050] device: 'ptyv6': device_add
[   10.952033] PM: Adding info for No Bus:ptyv6
[   10.956052] device: 'ptyv7': device_add
[   10.960024] PM: Adding info for No Bus:ptyv7
[   10.964050] device: 'ptyv8': device_add
[   10.968024] PM: Adding info for No Bus:ptyv8
[   10.972050] device: 'ptyv9': device_add
[   10.976024] PM: Adding info for No Bus:ptyv9
[   10.980050] device: 'ptyva': device_add
[   10.984025] PM: Adding info for No Bus:ptyva
[   10.988050] device: 'ptyvb': device_add
[   10.992025] PM: Adding info for No Bus:ptyvb
[   10.996050] device: 'ptyvc': device_add
[   11.000034] PM: Adding info for No Bus:ptyvc
[   11.004052] device: 'ptyvd': device_add
[   11.008025] PM: Adding info for No Bus:ptyvd
[   11.012051] device: 'ptyve': device_add
[   11.016025] PM: Adding info for No Bus:ptyve
[   11.020050] device: 'ptyvf': device_add
[   11.024025] PM: Adding info for No Bus:ptyvf
[   11.028050] device: 'ptyw0': device_add
[   11.032025] PM: Adding info for No Bus:ptyw0
[   11.036061] device: 'ptyw1': device_add
[   11.040026] PM: Adding info for No Bus:ptyw1
[   11.044051] device: 'ptyw2': device_add
[   11.048035] PM: Adding info for No Bus:ptyw2
[   11.052062] device: 'ptyw3': device_add
[   11.056027] PM: Adding info for No Bus:ptyw3
[   11.060059] device: 'ptyw4': device_add
[   11.064026] PM: Adding info for No Bus:ptyw4
[   11.068051] device: 'ptyw5': device_add
[   11.072025] PM: Adding info for No Bus:ptyw5
[   11.076050] device: 'ptyw6': device_add
[   11.080026] PM: Adding info for No Bus:ptyw6
[   11.084050] device: 'ptyw7': device_add
[   11.088026] PM: Adding info for No Bus:ptyw7
[   11.092050] device: 'ptyw8': device_add
[   11.096012] PM: Adding info for No Bus:ptyw8
[   11.100051] device: 'ptyw9': device_add
[   11.104036] PM: Adding info for No Bus:ptyw9
[   11.108052] device: 'ptywa': device_add
[   11.112027] PM: Adding info for No Bus:ptywa
[   11.116050] device: 'ptywb': device_add
[   11.120026] PM: Adding info for No Bus:ptywb
[   11.124050] device: 'ptywc': device_add
[   11.128026] PM: Adding info for No Bus:ptywc
[   11.132050] device: 'ptywd': device_add
[   11.136026] PM: Adding info for No Bus:ptywd
[   11.140058] device: 'ptywe': device_add
[   11.144037] PM: Adding info for No Bus:ptywe
[   11.148052] device: 'ptywf': device_add
[   11.152026] PM: Adding info for No Bus:ptywf
[   11.156050] device: 'ptyx0': device_add
[   11.160027] PM: Adding info for No Bus:ptyx0
[   11.164050] device: 'ptyx1': device_add
[   11.168027] PM: Adding info for No Bus:ptyx1
[   11.172050] device: 'ptyx2': device_add
[   11.176046] PM: Adding info for No Bus:ptyx2
[   11.180051] device: 'ptyx3': device_add
[   11.184034] PM: Adding info for No Bus:ptyx3
[   11.188051] device: 'ptyx4': device_add
[   11.192041] PM: Adding info for No Bus:ptyx4
[   11.196052] device: 'ptyx5': device_add
[   11.200038] PM: Adding info for No Bus:ptyx5
[   11.204052] device: 'ptyx6': device_add
[   11.208027] PM: Adding info for No Bus:ptyx6
[   11.212051] device: 'ptyx7': device_add
[   11.216027] PM: Adding info for No Bus:ptyx7
[   11.220050] device: 'ptyx8': device_add
[   11.224027] PM: Adding info for No Bus:ptyx8
[   11.228051] device: 'ptyx9': device_add
[   11.232027] PM: Adding info for No Bus:ptyx9
[   11.236051] device: 'ptyxa': device_add
[   11.240037] PM: Adding info for No Bus:ptyxa
[   11.244059] device: 'ptyxb': device_add
[   11.248029] PM: Adding info for No Bus:ptyxb
[   11.252051] device: 'ptyxc': device_add
[   11.256027] PM: Adding info for No Bus:ptyxc
[   11.264032] device: 'ptyxd': device_add
[   11.267885] PM: Adding info for No Bus:ptyxd
[   11.268051] device: 'ptyxe': device_add
[   11.272027] PM: Adding info for No Bus:ptyxe
[   11.276050] device: 'ptyxf': device_add
[   11.280028] PM: Adding info for No Bus:ptyxf
[   11.284059] device: 'ptyy0': device_add
[   11.288038] PM: Adding info for No Bus:ptyy0
[   11.292052] device: 'ptyy1': device_add
[   11.296028] PM: Adding info for No Bus:ptyy1
[   11.300051] device: 'ptyy2': device_add
[   11.304028] PM: Adding info for No Bus:ptyy2
[   11.308050] device: 'ptyy3': device_add
[   11.312028] PM: Adding info for No Bus:ptyy3
[   11.316050] device: 'ptyy4': device_add
[   11.320028] PM: Adding info for No Bus:ptyy4
[   11.324050] device: 'ptyy5': device_add
[   11.328028] PM: Adding info for No Bus:ptyy5
[   11.332050] device: 'ptyy6': device_add
[   11.336037] PM: Adding info for No Bus:ptyy6
[   11.340052] device: 'ptyy7': device_add
[   11.344039] PM: Adding info for No Bus:ptyy7
[   11.348059] device: 'ptyy8': device_add
[   11.352031] PM: Adding info for No Bus:ptyy8
[   11.356051] device: 'ptyy9': device_add
[   11.360028] PM: Adding info for No Bus:ptyy9
[   11.364050] device: 'ptyya': device_add
[   11.368028] PM: Adding info for No Bus:ptyya
[   11.372050] device: 'ptyyb': device_add
[   11.376028] PM: Adding info for No Bus:ptyyb
[   11.380050] device: 'ptyyc': device_add
[   11.384038] PM: Adding info for No Bus:ptyyc
[   11.388052] device: 'ptyyd': device_add
[   11.392029] PM: Adding info for No Bus:ptyyd
[   11.396050] device: 'ptyye': device_add
[   11.400029] PM: Adding info for No Bus:ptyye
[   11.404050] device: 'ptyyf': device_add
[   11.408029] PM: Adding info for No Bus:ptyyf
[   11.412050] device: 'ptyz0': device_add
[   11.416029] PM: Adding info for No Bus:ptyz0
[   11.420050] device: 'ptyz1': device_add
[   11.424029] PM: Adding info for No Bus:ptyz1
[   11.428050] device: 'ptyz2': device_add
[   11.432039] PM: Adding info for No Bus:ptyz2
[   11.436052] device: 'ptyz3': device_add
[   11.439915] PM: Adding info for No Bus:ptyz3
[   11.440050] device: 'ptyz4': device_add
[   11.444029] PM: Adding info for No Bus:ptyz4
[   11.448058] device: 'ptyz5': device_add
[   11.452030] PM: Adding info for No Bus:ptyz5
[   11.456051] device: 'ptyz6': device_add
[   11.460029] PM: Adding info for No Bus:ptyz6
[   11.464050] device: 'ptyz7': device_add
[   11.468029] PM: Adding info for No Bus:ptyz7
[   11.472050] device: 'ptyz8': device_add
[   11.476039] PM: Adding info for No Bus:ptyz8
[   11.480052] device: 'ptyz9': device_add
[   11.484040] PM: Adding info for No Bus:ptyz9
[   11.488052] device: 'ptyza': device_add
[   11.492030] PM: Adding info for No Bus:ptyza
[   11.496050] device: 'ptyzb': device_add
[   11.500029] PM: Adding info for No Bus:ptyzb
[   11.504059] device: 'ptyzc': device_add
[   11.508031] PM: Adding info for No Bus:ptyzc
[   11.512051] device: 'ptyzd': device_add
[   11.516029] PM: Adding info for No Bus:ptyzd
[   11.520050] device: 'ptyze': device_add
[   11.524040] PM: Adding info for No Bus:ptyze
[   11.528052] device: 'ptyzf': device_add
[   11.532030] PM: Adding info for No Bus:ptyzf
[   11.536050] device: 'ptya0': device_add
[   11.540030] PM: Adding info for No Bus:ptya0
[   11.544050] device: 'ptya1': device_add
[   11.548030] PM: Adding info for No Bus:ptya1
[   11.552058] device: 'ptya2': device_add
[   11.556032] PM: Adding info for No Bus:ptya2
[   11.560051] device: 'ptya3': device_add
[   11.564030] PM: Adding info for No Bus:ptya3
[   11.568051] device: 'ptya4': device_add
[   11.572040] PM: Adding info for No Bus:ptya4
[   11.576052] device: 'ptya5': device_add
[   11.580030] PM: Adding info for No Bus:ptya5
[   11.584051] device: 'ptya6': device_add
[   11.588030] PM: Adding info for No Bus:ptya6
[   11.592051] device: 'ptya7': device_add
[   11.596030] PM: Adding info for No Bus:ptya7
[   11.600050] device: 'ptya8': device_add
[   11.604030] PM: Adding info for No Bus:ptya8
[   11.608051] device: 'ptya9': device_add
[   11.612041] PM: Adding info for No Bus:ptya9
[   11.616052] device: 'ptyaa': device_add
[   11.620041] PM: Adding info for No Bus:ptyaa
[   11.624052] device: 'ptyab': device_add
[   11.628031] PM: Adding info for No Bus:ptyab
[   11.632061] device: 'ptyac': device_add
[   11.636032] PM: Adding info for No Bus:ptyac
[   11.640051] device: 'ptyad': device_add
[   11.644031] PM: Adding info for No Bus:ptyad
[   11.648051] device: 'ptyae': device_add
[   11.652031] PM: Adding info for No Bus:ptyae
[   11.656058] device: 'ptyaf': device_add
[   11.660033] PM: Adding info for No Bus:ptyaf
[   11.664051] device: 'ptyb0': device_add
[   11.668041] PM: Adding info for No Bus:ptyb0
[   11.672052] device: 'ptyb1': device_add
[   11.676031] PM: Adding info for No Bus:ptyb1
[   11.680051] device: 'ptyb2': device_add
[   11.684032] PM: Adding info for No Bus:ptyb2
[   11.688051] device: 'ptyb3': device_add
[   11.692031] PM: Adding info for No Bus:ptyb3
[   11.696051] device: 'ptyb4': device_add
[   11.700031] PM: Adding info for No Bus:ptyb4
[   11.704051] device: 'ptyb5': device_add
[   11.708031] PM: Adding info for No Bus:ptyb5
[   11.712051] device: 'ptyb6': device_add
[   11.716044] PM: Adding info for No Bus:ptyb6
[   11.720052] device: 'ptyb7': device_add
[   11.724032] PM: Adding info for No Bus:ptyb7
[   11.728059] device: 'ptyb8': device_add
[   11.732033] PM: Adding info for No Bus:ptyb8
[   11.736051] device: 'ptyb9': device_add
[   11.740031] PM: Adding info for No Bus:ptyb9
[   11.744051] device: 'ptyba': device_add
[   11.748032] PM: Adding info for No Bus:ptyba
[   11.752051] device: 'ptybb': device_add
[   11.756031] PM: Adding info for No Bus:ptybb
[   11.760058] device: 'ptybc': device_add
[   11.764043] PM: Adding info for No Bus:ptybc
[   11.768052] device: 'ptybd': device_add
[   11.772032] PM: Adding info for No Bus:ptybd
[   11.776050] device: 'ptybe': device_add
[   11.779920] PM: Adding info for No Bus:ptybe
[   11.780052] device: 'ptybf': device_add
[   11.784032] PM: Adding info for No Bus:ptybf
[   11.788050] device: 'ptyc0': device_add
[   11.792032] PM: Adding info for No Bus:ptyc0
[   11.796050] device: 'ptyc1': device_add
[   11.800032] PM: Adding info for No Bus:ptyc1
[   11.804050] device: 'ptyc2': device_add
[   11.808042] PM: Adding info for No Bus:ptyc2
[   11.812052] device: 'ptyc3': device_add
[   11.816040] PM: Adding info for No Bus:ptyc3
[   11.820051] device: 'ptyc4': device_add
[   11.824032] PM: Adding info for No Bus:ptyc4
[   11.828051] device: 'ptyc5': device_add
[   11.832032] PM: Adding info for No Bus:ptyc5
[   11.836050] device: 'ptyc6': device_add
[   11.840032] PM: Adding info for No Bus:ptyc6
[   11.844051] device: 'ptyc7': device_add
[   11.848032] PM: Adding info for No Bus:ptyc7
[   11.852051] device: 'ptyc8': device_add
[   11.856043] PM: Adding info for No Bus:ptyc8
[   11.860060] device: 'ptyc9': device_add
[   11.864036] PM: Adding info for No Bus:ptyc9
[   11.868051] device: 'ptyca': device_add
[   11.872033] PM: Adding info for No Bus:ptyca
[   11.876051] device: 'ptycb': device_add
[   11.880033] PM: Adding info for No Bus:ptycb
[   11.884051] device: 'ptycc': device_add
[   11.888033] PM: Adding info for No Bus:ptycc
[   11.892051] device: 'ptycd': device_add
[   11.896033] PM: Adding info for No Bus:ptycd
[   11.900051] device: 'ptyce': device_add
[   11.904043] PM: Adding info for No Bus:ptyce
[   11.908052] device: 'ptycf': device_add
[   11.912033] PM: Adding info for No Bus:ptycf
[   11.916051] device: 'ptyd0': device_add
[   11.920045] PM: Adding info for No Bus:ptyd0
[   11.924052] device: 'ptyd1': device_add
[   11.928033] PM: Adding info for No Bus:ptyd1
[   11.932051] device: 'ptyd2': device_add
[   11.936034] PM: Adding info for No Bus:ptyd2
[   11.944006] device: 'ptyd3': device_add
[   11.947871] PM: Adding info for No Bus:ptyd3
[   11.948059] device: 'ptyd4': device_add
[   11.952045] PM: Adding info for No Bus:ptyd4
[   11.956052] device: 'ptyd5': device_add
[   11.960034] PM: Adding info for No Bus:ptyd5
[   11.964058] device: 'ptyd6': device_add
[   11.968035] PM: Adding info for No Bus:ptyd6
[   11.972051] device: 'ptyd7': device_add
[   11.976034] PM: Adding info for No Bus:ptyd7
[   11.980051] device: 'ptyd8': device_add
[   11.984034] PM: Adding info for No Bus:ptyd8
[   11.988051] device: 'ptyd9': device_add
[   11.992034] PM: Adding info for No Bus:ptyd9
[   11.996051] device: 'ptyda': device_add
[   12.000044] PM: Adding info for No Bus:ptyda
[   12.004052] device: 'ptydb': device_add
[   12.008035] PM: Adding info for No Bus:ptydb
[   12.012051] device: 'ptydc': device_add
[   12.016034] PM: Adding info for No Bus:ptydc
[   12.020051] device: 'ptydd': device_add
[   12.024034] PM: Adding info for No Bus:ptydd
[   12.028051] device: 'ptyde': device_add
[   12.032034] PM: Adding info for No Bus:ptyde
[   12.036051] device: 'ptydf': device_add
[   12.040034] PM: Adding info for No Bus:ptydf
[   12.044051] device: 'ptye0': device_add
[   12.048045] PM: Adding info for No Bus:ptye0
[   12.052052] device: 'ptye1': device_add
[   12.056035] PM: Adding info for No Bus:ptye1
[   12.060051] device: 'ptye2': device_add
[   12.064046] PM: Adding info for No Bus:ptye2
[   12.068059] device: 'ptye3': device_add
[   12.072036] PM: Adding info for No Bus:ptye3
[   12.076051] device: 'ptye4': device_add
[   12.080035] PM: Adding info for No Bus:ptye4
[   12.084051] device: 'ptye5': device_add
[   12.088035] PM: Adding info for No Bus:ptye5
[   12.092051] device: 'ptye6': device_add
[   12.096045] PM: Adding info for No Bus:ptye6
[   12.100052] device: 'ptye7': device_add
[   12.104035] PM: Adding info for No Bus:ptye7
[   12.112032] device: 'ptye8': device_add
[   12.115900] PM: Adding info for No Bus:ptye8
[   12.116051] device: 'ptye9': device_add
[   12.120047] PM: Adding info for No Bus:ptye9
[   12.124052] device: 'ptyea': device_add
[   12.128037] PM: Adding info for No Bus:ptyea
[   12.132051] device: 'ptyeb': device_add
[   12.136035] PM: Adding info for No Bus:ptyeb
[   12.140051] device: 'ptyec': device_add
[   12.144046] PM: Adding info for No Bus:ptyec
[   12.148052] device: 'ptyed': device_add
[   12.152036] PM: Adding info for No Bus:ptyed
[   12.156051] device: 'ptyee': device_add
[   12.160036] PM: Adding info for No Bus:ptyee
[   12.164051] device: 'ptyef': device_add
[   12.168036] PM: Adding info for No Bus:ptyef
[   12.172080] device: 'ttyp0': device_add
[   12.176033] PM: Adding info for No Bus:ttyp0
[   12.180051] device: 'ttyp1': device_add
[   12.184032] PM: Adding info for No Bus:ttyp1
[   12.188051] device: 'ttyp2': device_add
[   12.192043] PM: Adding info for No Bus:ttyp2
[   12.196052] device: 'ttyp3': device_add
[   12.200032] PM: Adding info for No Bus:ttyp3
[   12.204051] device: 'ttyp4': device_add
[   12.208032] PM: Adding info for No Bus:ttyp4
[   12.212061] device: 'ttyp5': device_add
[   12.216034] PM: Adding info for No Bus:ttyp5
[   12.220051] device: 'ttyp6': device_add
[   12.224032] PM: Adding info for No Bus:ttyp6
[   12.228051] device: 'ttyp7': device_add
[   12.232032] PM: Adding info for No Bus:ttyp7
[   12.236051] device: 'ttyp8': device_add
[   12.240042] PM: Adding info for No Bus:ttyp8
[   12.244052] device: 'ttyp9': device_add
[   12.248032] PM: Adding info for No Bus:ttyp9
[   12.252051] device: 'ttypa': device_add
[   12.256032] PM: Adding info for No Bus:ttypa
[   12.260051] device: 'ttypb': device_add
[   12.264032] PM: Adding info for No Bus:ttypb
[   12.268051] device: 'ttypc': device_add
[   12.272032] PM: Adding info for No Bus:ttypc
[   12.280040] device: 'ttypd': device_add
[   12.283900] PM: Adding info for No Bus:ttypd
[   12.284052] device: 'ttype': device_add
[   12.288043] PM: Adding info for No Bus:ttype
[   12.292052] device: 'ttypf': device_add
[   12.296033] PM: Adding info for No Bus:ttypf
[   12.300051] device: 'ttyq0': device_add
[   12.304054] PM: Adding info for No Bus:ttyq0
[   12.308051] device: 'ttyq1': device_add
[   12.312040] PM: Adding info for No Bus:ttyq1
[   12.316051] device: 'ttyq2': device_add
[   12.320036] PM: Adding info for No Bus:ttyq2
[   12.324051] device: 'ttyq3': device_add
[   12.328033] PM: Adding info for No Bus:ttyq3
[   12.332051] device: 'ttyq4': device_add
[   12.336044] PM: Adding info for No Bus:ttyq4
[   12.340052] device: 'ttyq5': device_add
[   12.344033] PM: Adding info for No Bus:ttyq5
[   12.348051] device: 'ttyq6': device_add
[   12.352033] PM: Adding info for No Bus:ttyq6
[   12.356051] device: 'ttyq7': device_add
[   12.360045] PM: Adding info for No Bus:ttyq7
[   12.364052] device: 'ttyq8': device_add
[   12.368033] PM: Adding info for No Bus:ttyq8
[   12.372051] device: 'ttyq9': device_add
[   12.376034] PM: Adding info for No Bus:ttyq9
[   12.380058] device: 'ttyqa': device_add
[   12.384045] PM: Adding info for No Bus:ttyqa
[   12.388064] device: 'ttyqb': device_add
[   12.392035] PM: Adding info for No Bus:ttyqb
[   12.396051] device: 'ttyqc': device_add
[   12.400034] PM: Adding info for No Bus:ttyqc
[   12.404051] device: 'ttyqd': device_add
[   12.408033] PM: Adding info for No Bus:ttyqd
[   12.412051] device: 'ttyqe': device_add
[   12.416034] PM: Adding info for No Bus:ttyqe
[   12.420051] device: 'ttyqf': device_add
[   12.424034] PM: Adding info for No Bus:ttyqf
[   12.428051] device: 'ttyr0': device_add
[   12.432044] PM: Adding info for No Bus:ttyr0
[   12.436052] device: 'ttyr1': device_add
[   12.440034] PM: Adding info for No Bus:ttyr1
[   12.444051] device: 'ttyr2': device_add
[   12.447910] PM: Adding info for No Bus:ttyr2
[   12.448051] device: 'ttyr3': device_add
[   12.452034] PM: Adding info for No Bus:ttyr3
[   12.456051] device: 'ttyr4': device_add
[   12.460034] PM: Adding info for No Bus:ttyr4
[   12.464051] device: 'ttyr5': device_add
[   12.468034] PM: Adding info for No Bus:ttyr5
[   12.472051] device: 'ttyr6': device_add
[   12.476044] PM: Adding info for No Bus:ttyr6
[   12.480060] device: 'ttyr7': device_add
[   12.484036] PM: Adding info for No Bus:ttyr7
[   12.488051] device: 'ttyr8': device_add
[   12.492034] PM: Adding info for No Bus:ttyr8
[   12.496051] device: 'ttyr9': device_add
[   12.500046] PM: Adding info for No Bus:ttyr9
[   12.504052] device: 'ttyra': device_add
[   12.508036] PM: Adding info for No Bus:ttyra
[   12.512051] device: 'ttyrb': device_add
[   12.516035] PM: Adding info for No Bus:ttyrb
[   12.520051] device: 'ttyrc': device_add
[   12.524045] PM: Adding info for No Bus:ttyrc
[   12.528052] device: 'ttyrd': device_add
[   12.532036] PM: Adding info for No Bus:ttyrd
[   12.536051] device: 'ttyre': device_add
[   12.540035] PM: Adding info for No Bus:ttyre
[   12.544051] device: 'ttyrf': device_add
[   12.548035] PM: Adding info for No Bus:ttyrf
[   12.552051] device: 'ttys0': device_add
[   12.556035] PM: Adding info for No Bus:ttys0
[   12.560051] device: 'ttys1': device_add
[   12.564035] PM: Adding info for No Bus:ttys1
[   12.568051] device: 'ttys2': device_add
[   12.572046] PM: Adding info for No Bus:ttys2
[   12.576052] device: 'ttys3': device_add
[   12.580036] PM: Adding info for No Bus:ttys3
[   12.584059] device: 'ttys4': device_add
[   12.588038] PM: Adding info for No Bus:ttys4
[   12.592052] device: 'ttys5': device_add
[   12.596035] PM: Adding info for No Bus:ttys5
[   12.600051] device: 'ttys6': device_add
[   12.604035] PM: Adding info for No Bus:ttys6
[   12.608059] device: 'ttys7': device_add
[   12.611922] PM: Adding info for No Bus:ttys7
[   12.612052] device: 'ttys8': device_add
[   12.616046] PM: Adding info for No Bus:ttys8
[   12.620052] device: 'ttys9': device_add
[   12.624046] PM: Adding info for No Bus:ttys9
[   12.628052] device: 'ttysa': device_add
[   12.632038] PM: Adding info for No Bus:ttysa
[   12.636051] device: 'ttysb': device_add
[   12.640047] PM: Adding info for No Bus:ttysb
[   12.644052] device: 'ttysc': device_add
[   12.648037] PM: Adding info for No Bus:ttysc
[   12.652051] device: 'ttysd': device_add
[   12.656036] PM: Adding info for No Bus:ttysd
[   12.660051] device: 'ttyse': device_add
[   12.664047] PM: Adding info for No Bus:ttyse
[   12.668052] device: 'ttysf': device_add
[   12.672037] PM: Adding info for No Bus:ttysf
[   12.676051] device: 'ttyt0': device_add
[   12.680037] PM: Adding info for No Bus:ttyt0
[   12.684059] device: 'ttyt1': device_add
[   12.688038] PM: Adding info for No Bus:ttyt1
[   12.692051] device: 'ttyt2': device_add
[   12.696036] PM: Adding info for No Bus:ttyt2
[   12.700051] device: 'ttyt3': device_add
[   12.704037] PM: Adding info for No Bus:ttyt3
[   12.708051] device: 'ttyt4': device_add
[   12.712047] PM: Adding info for No Bus:ttyt4
[   12.716052] device: 'ttyt5': device_add
[   12.720037] PM: Adding info for No Bus:ttyt5
[   12.724051] device: 'ttyt6': device_add
[   12.728037] PM: Adding info for No Bus:ttyt6
[   12.732051] device: 'ttyt7': device_add
[   12.736036] PM: Adding info for No Bus:ttyt7
[   12.740051] device: 'ttyt8': device_add
[   12.744037] PM: Adding info for No Bus:ttyt8
[   12.748051] device: 'ttyt9': device_add
[   12.752037] PM: Adding info for No Bus:ttyt9
[   12.756051] device: 'ttyta': device_add
[   12.760048] PM: Adding info for No Bus:ttyta
[   12.764052] device: 'ttytb': device_add
[   12.768038] PM: Adding info for No Bus:ttytb
[   12.772051] device: 'ttytc': device_add
[   12.776033] PM: Adding info for No Bus:ttytc
[   12.780051] device: 'ttytd': device_add
[   12.784037] PM: Adding info for No Bus:ttytd
[   12.788069] device: 'ttyte': device_add
[   12.792040] PM: Adding info for No Bus:ttyte
[   12.796051] device: 'ttytf': device_add
[   12.800037] PM: Adding info for No Bus:ttytf
[   12.804051] device: 'ttyu0': device_add
[   12.808049] PM: Adding info for No Bus:ttyu0
[   12.812052] device: 'ttyu1': device_add
[   12.816047] PM: Adding info for No Bus:ttyu1
[   12.820051] device: 'ttyu2': device_add
[   12.824038] PM: Adding info for No Bus:ttyu2
[   12.828059] device: 'ttyu3': device_add
[   12.832039] PM: Adding info for No Bus:ttyu3
[   12.836051] device: 'ttyu4': device_add
[   12.840038] PM: Adding info for No Bus:ttyu4
[   12.844051] device: 'ttyu5': device_add
[   12.848038] PM: Adding info for No Bus:ttyu5
[   12.852051] device: 'ttyu6': device_add
[   12.856050] PM: Adding info for No Bus:ttyu6
[   12.860052] device: 'ttyu7': device_add
[   12.864040] PM: Adding info for No Bus:ttyu7
[   12.868051] device: 'ttyu8': device_add
[   12.872040] PM: Adding info for No Bus:ttyu8
[   12.876051] device: 'ttyu9': device_add
[   12.880039] PM: Adding info for No Bus:ttyu9
[   12.884051] device: 'ttyua': device_add
[   12.888041] PM: Adding info for No Bus:ttyua
[   12.892059] device: 'ttyub': device_add
[   12.896041] PM: Adding info for No Bus:ttyub
[   12.900052] device: 'ttyuc': device_add
[   12.904050] PM: Adding info for No Bus:ttyuc
[   12.908052] device: 'ttyud': device_add
[   12.912041] PM: Adding info for No Bus:ttyud
[   12.916051] device: 'ttyue': device_add
[   12.920040] PM: Adding info for No Bus:ttyue
[   12.924051] device: 'ttyuf': device_add
[   12.928040] PM: Adding info for No Bus:ttyuf
[   12.932051] device: 'ttyv0': device_add
[   12.935932] PM: Adding info for No Bus:ttyv0
[   12.936053] device: 'ttyv1': device_add
[   12.940041] PM: Adding info for No Bus:ttyv1
[   12.944051] device: 'ttyv2': device_add
[   12.948051] PM: Adding info for No Bus:ttyv2
[   12.952052] device: 'ttyv3': device_add
[   12.956041] PM: Adding info for No Bus:ttyv3
[   12.960051] device: 'ttyv4': device_add
[   12.964041] PM: Adding info for No Bus:ttyv4
[   12.968051] device: 'ttyv5': device_add
[   12.972041] PM: Adding info for No Bus:ttyv5
[   12.976051] device: 'ttyv6': device_add
[   12.980041] PM: Adding info for No Bus:ttyv6
[   12.984051] device: 'ttyv7': device_add
[   12.988041] PM: Adding info for No Bus:ttyv7
[   12.992059] device: 'ttyv8': device_add
[   12.996054] PM: Adding info for No Bus:ttyv8
[   13.000053] device: 'ttyv9': device_add
[   13.004042] PM: Adding info for No Bus:ttyv9
[   13.008051] device: 'ttyva': device_add
[   13.012042] PM: Adding info for No Bus:ttyva
[   13.016051] device: 'ttyvb': device_add
[   13.020042] PM: Adding info for No Bus:ttyvb
[   13.024051] device: 'ttyvc': device_add
[   13.028042] PM: Adding info for No Bus:ttyvc
[   13.032051] device: 'ttyvd': device_add
[   13.036042] PM: Adding info for No Bus:ttyvd
[   13.040051] device: 'ttyve': device_add
[   13.044053] PM: Adding info for No Bus:ttyve
[   13.048061] device: 'ttyvf': device_add
[   13.052044] PM: Adding info for No Bus:ttyvf
[   13.056052] device: 'ttyw0': device_add
[   13.060042] PM: Adding info for No Bus:ttyw0
[   13.064051] device: 'ttyw1': device_add
[   13.068042] PM: Adding info for No Bus:ttyw1
[   13.072051] device: 'ttyw2': device_add
[   13.076054] PM: Adding info for No Bus:ttyw2
[   13.080052] device: 'ttyw3': device_add
[   13.084042] PM: Adding info for No Bus:ttyw3
[   13.092006] device: 'ttyw4': device_add
[   13.095891] PM: Adding info for No Bus:ttyw4
[   13.096062] device: 'ttyw5': device_add
[   13.100045] PM: Adding info for No Bus:ttyw5
[   13.104052] device: 'ttyw6': device_add
[   13.108042] PM: Adding info for No Bus:ttyw6
[   13.112051] device: 'ttyw7': device_add
[   13.116042] PM: Adding info for No Bus:ttyw7
[   13.120051] device: 'ttyw8': device_add
[   13.124043] PM: Adding info for No Bus:ttyw8
[   13.128051] device: 'ttyw9': device_add
[   13.132053] PM: Adding info for No Bus:ttyw9
[   13.136052] device: 'ttywa': device_add
[   13.140054] PM: Adding info for No Bus:ttywa
[   13.144053] device: 'ttywb': device_add
[   13.148043] PM: Adding info for No Bus:ttywb
[   13.152051] device: 'ttywc': device_add
[   13.156043] PM: Adding info for No Bus:ttywc
[   13.160051] device: 'ttywd': device_add
[   13.164043] PM: Adding info for No Bus:ttywd
[   13.168051] device: 'ttywe': device_add
[   13.172043] PM: Adding info for No Bus:ttywe
[   13.176051] device: 'ttywf': device_add
[   13.180044] PM: Adding info for No Bus:ttywf
[   13.184051] device: 'ttyx0': device_add
[   13.188054] PM: Adding info for No Bus:ttyx0
[   13.192053] device: 'ttyx1': device_add
[   13.196044] PM: Adding info for No Bus:ttyx1
[   13.200059] device: 'ttyx2': device_add
[   13.204045] PM: Adding info for No Bus:ttyx2
[   13.208052] device: 'ttyx3': device_add
[   13.212043] PM: Adding info for No Bus:ttyx3
[   13.216051] device: 'ttyx4': device_add
[   13.220055] PM: Adding info for No Bus:ttyx4
[   13.224053] device: 'ttyx5': device_add
[   13.228046] PM: Adding info for No Bus:ttyx5
[   13.232051] device: 'ttyx6': device_add
[   13.236055] PM: Adding info for No Bus:ttyx6
[   13.240053] device: 'ttyx7': device_add
[   13.244044] PM: Adding info for No Bus:ttyx7
[   13.248052] device: 'ttyx8': device_add
[   13.251921] PM: Adding info for No Bus:ttyx8
[   13.252051] device: 'ttyx9': device_add
[   13.256044] PM: Adding info for No Bus:ttyx9
[   13.260051] device: 'ttyxa': device_add
[   13.264045] PM: Adding info for No Bus:ttyxa
[   13.268059] device: 'ttyxb': device_add
[   13.272046] PM: Adding info for No Bus:ttyxb
[   13.276052] device: 'ttyxc': device_add
[   13.280055] PM: Adding info for No Bus:ttyxc
[   13.284053] device: 'ttyxd': device_add
[   13.288045] PM: Adding info for No Bus:ttyxd
[   13.292051] device: 'ttyxe': device_add
[   13.296045] PM: Adding info for No Bus:ttyxe
[   13.300059] device: 'ttyxf': device_add
[   13.304046] PM: Adding info for No Bus:ttyxf
[   13.308052] device: 'ttyy0': device_add
[   13.312045] PM: Adding info for No Bus:ttyy0
[   13.316051] device: 'ttyy1': device_add
[   13.320045] PM: Adding info for No Bus:ttyy1
[   13.324051] device: 'ttyy2': device_add
[   13.328056] PM: Adding info for No Bus:ttyy2
[   13.332053] device: 'ttyy3': device_add
[   13.336045] PM: Adding info for No Bus:ttyy3
[   13.340051] device: 'ttyy4': device_add
[   13.344046] PM: Adding info for No Bus:ttyy4
[   13.348051] device: 'ttyy5': device_add
[   13.352045] PM: Adding info for No Bus:ttyy5
[   13.356051] device: 'ttyy6': device_add
[   13.360046] PM: Adding info for No Bus:ttyy6
[   13.364062] device: 'ttyy7': device_add
[   13.368048] PM: Adding info for No Bus:ttyy7
[   13.372053] device: 'ttyy8': device_add
[   13.376057] PM: Adding info for No Bus:ttyy8
[   13.380053] device: 'ttyy9': device_add
[   13.384046] PM: Adding info for No Bus:ttyy9
[   13.388051] device: 'ttyya': device_add
[   13.392046] PM: Adding info for No Bus:ttyya
[   13.396051] device: 'ttyyb': device_add
[   13.400047] PM: Adding info for No Bus:ttyyb
[   13.404060] device: 'ttyyc': device_add
[   13.408049] PM: Adding info for No Bus:ttyyc
[   13.412052] device: 'ttyyd': device_add
[   13.416046] PM: Adding info for No Bus:ttyyd
[   13.420052] device: 'ttyye': device_add
[   13.424081] PM: Adding info for No Bus:ttyye
[   13.428053] device: 'ttyyf': device_add
[   13.432055] PM: Adding info for No Bus:ttyyf
[   13.436051] device: 'ttyz0': device_add
[   13.440047] PM: Adding info for No Bus:ttyz0
[   13.444051] device: 'ttyz1': device_add
[   13.448047] PM: Adding info for No Bus:ttyz1
[   13.452051] device: 'ttyz2': device_add
[   13.456046] PM: Adding info for No Bus:ttyz2
[   13.460051] device: 'ttyz3': device_add
[   13.464047] PM: Adding info for No Bus:ttyz3
[   13.468051] device: 'ttyz4': device_add
[   13.472057] PM: Adding info for No Bus:ttyz4
[   13.476052] device: 'ttyz5': device_add
[   13.480047] PM: Adding info for No Bus:ttyz5
[   13.484051] device: 'ttyz6': device_add
[   13.488047] PM: Adding info for No Bus:ttyz6
[   13.492060] device: 'ttyz7': device_add
[   13.496050] PM: Adding info for No Bus:ttyz7
[   13.500052] device: 'ttyz8': device_add
[   13.504047] PM: Adding info for No Bus:ttyz8
[   13.508060] device: 'ttyz9': device_add
[   13.512060] PM: Adding info for No Bus:ttyz9
[   13.516053] device: 'ttyza': device_add
[   13.520059] PM: Adding info for No Bus:ttyza
[   13.524053] device: 'ttyzb': device_add
[   13.528048] PM: Adding info for No Bus:ttyzb
[   13.532051] device: 'ttyzc': device_add
[   13.536048] PM: Adding info for No Bus:ttyzc
[   13.540052] device: 'ttyzd': device_add
[   13.544047] PM: Adding info for No Bus:ttyzd
[   13.548051] device: 'ttyze': device_add
[   13.552046] PM: Adding info for No Bus:ttyze
[   13.556051] device: 'ttyzf': device_add
[   13.559924] PM: Adding info for No Bus:ttyzf
[   13.560051] device: 'ttya0': device_add
[   13.564059] PM: Adding info for No Bus:ttya0
[   13.568053] device: 'ttya1': device_add
[   13.572048] PM: Adding info for No Bus:ttya1
[   13.576052] device: 'ttya2': device_add
[   13.580049] PM: Adding info for No Bus:ttya2
[   13.584052] device: 'ttya3': device_add
[   13.588049] PM: Adding info for No Bus:ttya3
[   13.592052] device: 'ttya4': device_add
[   13.596049] PM: Adding info for No Bus:ttya4
[   13.600051] device: 'ttya5': device_add
[   13.604049] PM: Adding info for No Bus:ttya5
[   13.608059] device: 'ttya6': device_add
[   13.612061] PM: Adding info for No Bus:ttya6
[   13.616053] device: 'ttya7': device_add
[   13.620049] PM: Adding info for No Bus:ttya7
[   13.624052] device: 'ttya8': device_add
[   13.628048] PM: Adding info for No Bus:ttya8
[   13.632052] device: 'ttya9': device_add
[   13.636060] PM: Adding info for No Bus:ttya9
[   13.640053] device: 'ttyaa': device_add
[   13.644050] PM: Adding info for No Bus:ttyaa
[   13.648052] device: 'ttyab': device_add
[   13.652061] PM: Adding info for No Bus:ttyab
[   13.656055] device: 'ttyac': device_add
[   13.660061] PM: Adding info for No Bus:ttyac
[   13.664053] device: 'ttyad': device_add
[   13.668049] PM: Adding info for No Bus:ttyad
[   13.672052] device: 'ttyae': device_add
[   13.676050] PM: Adding info for No Bus:ttyae
[   13.680052] device: 'ttyaf': device_add
[   13.684050] PM: Adding info for No Bus:ttyaf
[   13.688051] device: 'ttyb0': device_add
[   13.692049] PM: Adding info for No Bus:ttyb0
[   13.696052] device: 'ttyb1': device_add
[   13.700050] PM: Adding info for No Bus:ttyb1
[   13.704052] device: 'ttyb2': device_add
[   13.707937] PM: Adding info for No Bus:ttyb2
[   13.708069] device: 'ttyb3': device_add
[   13.712052] PM: Adding info for No Bus:ttyb3
[   13.716053] device: 'ttyb4': device_add
[   13.720049] PM: Adding info for No Bus:ttyb4
[   13.724052] device: 'ttyb5': device_add
[   13.728049] PM: Adding info for No Bus:ttyb5
[   13.732052] device: 'ttyb6': device_add
[   13.736050] PM: Adding info for No Bus:ttyb6
[   13.740052] device: 'ttyb7': device_add
[   13.744049] PM: Adding info for No Bus:ttyb7
[   13.748052] device: 'ttyb8': device_add
[   13.752060] PM: Adding info for No Bus:ttyb8
[   13.756053] device: 'ttyb9': device_add
[   13.760050] PM: Adding info for No Bus:ttyb9
[   13.764052] device: 'ttyba': device_add
[   13.768050] PM: Adding info for No Bus:ttyba
[   13.772052] device: 'ttybb': device_add
[   13.776050] PM: Adding info for No Bus:ttybb
[   13.780052] device: 'ttybc': device_add
[   13.784050] PM: Adding info for No Bus:ttybc
[   13.788052] device: 'ttybd': device_add
[   13.792062] PM: Adding info for No Bus:ttybd
[   13.796053] device: 'ttybe': device_add
[   13.800067] PM: Adding info for No Bus:ttybe
[   13.804054] device: 'ttybf': device_add
[   13.808052] PM: Adding info for No Bus:ttybf
[   13.812060] device: 'ttyc0': device_add
[   13.816066] PM: Adding info for No Bus:ttyc0
[   13.820054] device: 'ttyc1': device_add
[   13.824052] PM: Adding info for No Bus:ttyc1
[   13.828052] device: 'ttyc2': device_add
[   13.832052] PM: Adding info for No Bus:ttyc2
[   13.836053] device: 'ttyc3': device_add
[   13.840051] PM: Adding info for No Bus:ttyc3
[   13.844052] device: 'ttyc4': device_add
[   13.848062] PM: Adding info for No Bus:ttyc4
[   13.852053] device: 'ttyc5': device_add
[   13.856025] PM: Adding info for No Bus:ttyc5
[   13.860052] device: 'ttyc6': device_add
[   13.864052] PM: Adding info for No Bus:ttyc6
[   13.868052] device: 'ttyc7': device_add
[   13.872052] PM: Adding info for No Bus:ttyc7
[   13.876052] device: 'ttyc8': device_add
[   13.880051] PM: Adding info for No Bus:ttyc8
[   13.884052] device: 'ttyc9': device_add
[   13.888051] PM: Adding info for No Bus:ttyc9
[   13.892052] device: 'ttyca': device_add
[   13.896063] PM: Adding info for No Bus:ttyca
[   13.900053] device: 'ttycb': device_add
[   13.904053] PM: Adding info for No Bus:ttycb
[   13.908052] device: 'ttycc': device_add
[   13.912054] PM: Adding info for No Bus:ttycc
[   13.916060] device: 'ttycd': device_add
[   13.920055] PM: Adding info for No Bus:ttycd
[   13.924052] device: 'ttyce': device_add
[   13.928053] PM: Adding info for No Bus:ttyce
[   13.932061] device: 'ttycf': device_add
[   13.936054] PM: Adding info for No Bus:ttycf
[   13.940063] device: 'ttyd0': device_add
[   13.944067] PM: Adding info for No Bus:ttyd0
[   13.948053] device: 'ttyd1': device_add
[   13.952053] PM: Adding info for No Bus:ttyd1
[   13.956052] device: 'ttyd2': device_add
[   13.960052] PM: Adding info for No Bus:ttyd2
[   13.964052] device: 'ttyd3': device_add
[   13.968053] PM: Adding info for No Bus:ttyd3
[   13.972052] device: 'ttyd4': device_add
[   13.976053] PM: Adding info for No Bus:ttyd4
[   13.980052] device: 'ttyd5': device_add
[   13.984053] PM: Adding info for No Bus:ttyd5
[   13.988052] device: 'ttyd6': device_add
[   13.992064] PM: Adding info for No Bus:ttyd6
[   14.000034] device: 'ttyd7': device_add
[   14.003918] PM: Adding info for No Bus:ttyd7
[   14.004053] device: 'ttyd8': device_add
[   14.008055] PM: Adding info for No Bus:ttyd8
[   14.012053] device: 'ttyd9': device_add
[   14.016054] PM: Adding info for No Bus:ttyd9
[   14.020060] device: 'ttyda': device_add
[   14.024057] PM: Adding info for No Bus:ttyda
[   14.028053] device: 'ttydb': device_add
[   14.032054] PM: Adding info for No Bus:ttydb
[   14.036053] device: 'ttydc': device_add
[   14.040066] PM: Adding info for No Bus:ttydc
[   14.044054] device: 'ttydd': device_add
[   14.048055] PM: Adding info for No Bus:ttydd
[   14.052052] device: 'ttyde': device_add
[   14.056054] PM: Adding info for No Bus:ttyde
[   14.060052] device: 'ttydf': device_add
[   14.064055] PM: Adding info for No Bus:ttydf
[   14.068053] device: 'ttye0': device_add
[   14.072055] PM: Adding info for No Bus:ttye0
[   14.076053] device: 'ttye1': device_add
[   14.080055] PM: Adding info for No Bus:ttye1
[   14.084052] device: 'ttye2': device_add
[   14.088080] PM: Adding info for No Bus:ttye2
[   14.092053] device: 'ttye3': device_add
[   14.096056] PM: Adding info for No Bus:ttye3
[   14.100052] device: 'ttye4': device_add
[   14.104055] PM: Adding info for No Bus:ttye4
[   14.108052] device: 'ttye5': device_add
[   14.112056] PM: Adding info for No Bus:ttye5
[   14.116052] device: 'ttye6': device_add
[   14.120056] PM: Adding info for No Bus:ttye6
[   14.124061] device: 'ttye7': device_add
[   14.128059] PM: Adding info for No Bus:ttye7
[   14.132053] device: 'ttye8': device_add
[   14.136068] PM: Adding info for No Bus:ttye8
[   14.140054] device: 'ttye9': device_add
[   14.144069] PM: Adding info for No Bus:ttye9
[   14.148053] device: 'ttyea': device_add
[   14.152059] PM: Adding info for No Bus:ttyea
[   14.156061] device: 'ttyeb': device_add
[   14.160060] PM: Adding info for No Bus:ttyeb
[   14.164054] device: 'ttyec': device_add
[   14.168059] PM: Adding info for No Bus:ttyec
[   14.172052] device: 'ttyed': device_add
[   14.176059] PM: Adding info for No Bus:ttyed
[   14.180052] device: 'ttyee': device_add
[   14.184070] PM: Adding info for No Bus:ttyee
[   14.188054] device: 'ttyef': device_add
[   14.192061] PM: Adding info for No Bus:ttyef
[   14.196074] device: 'ptmx': device_add
[   14.200060] PM: Adding info for No Bus:ptmx
[   14.204057] initcall pty_init+0x0/0x40e returned 0 after 3968750 usecs
[   14.208004] calling  sysrq_init+0x0/0x6d @ 1
[   14.212020] initcall sysrq_init+0x0/0x6d returned 0 after 0 usecs
[   14.216003] calling  rp_init+0x0/0xf40 @ 1
[   14.220002] RocketPort device driver module, version 2.09, 12-June-2003
[   14.224025] No rocketport ports found; unloading driver
[   14.228018] initcall rp_init+0x0/0xf40 returned -6 after 7812 usecs
[   14.232004] initcall rp_init+0x0/0xf40 returned with error code -6 
[   14.236003] calling  cy_init+0x0/0x453 @ 1
[   14.240003] Cyclades driver 2.6 (built Jun 11 2010 12:25:28)
[   14.257665] bus: 'pci': add driver cyclades
[   14.260069] initcall cy_init+0x0/0x453 returned 0 after 19531 usecs
[   14.264004] calling  epca_module_init+0x0/0x39e @ 1
[   14.268004] DIGI epca driver version 1.3.0.1-LK2.6 loaded.
[   14.272003] bus: 'pci': add driver epca
[   14.276076] device: 'ttyD0': device_add
[   14.280076] PM: Adding info for No Bus:ttyD0
[   14.284053] device: 'ttyD1': device_add
[   14.288069] PM: Adding info for No Bus:ttyD1
[   14.292054] device: 'ttyD2': device_add
[   14.296064] PM: Adding info for No Bus:ttyD2
[   14.300070] device: 'ttyD3': device_add
[   14.304065] PM: Adding info for No Bus:ttyD3
[   14.308054] device: 'ttyD4': device_add
[   14.312060] PM: Adding info for No Bus:ttyD4
[   14.316053] device: 'ttyD5': device_add
[   14.320061] PM: Adding info for No Bus:ttyD5
[   14.324053] device: 'ttyD6': device_add
[   14.328059] PM: Adding info for No Bus:ttyD6
[   14.336033] device: 'ttyD7': device_add
[   14.339931] PM: Adding info for No Bus:ttyD7
[   14.340053] device: 'ttyD8': device_add
[   14.344064] PM: Adding info for No Bus:ttyD8
[   14.348053] device: 'ttyD9': device_add
[   14.352059] PM: Adding info for No Bus:ttyD9
[   14.356053] device: 'ttyD10': device_add
[   14.360060] PM: Adding info for No Bus:ttyD10
[   14.364053] device: 'ttyD11': device_add
[   14.368060] PM: Adding info for No Bus:ttyD11
[   14.372052] device: 'ttyD12': device_add
[   14.376060] PM: Adding info for No Bus:ttyD12
[   14.380052] device: 'ttyD13': device_add
[   14.384070] PM: Adding info for No Bus:ttyD13
[   14.388053] device: 'ttyD14': device_add
[   14.392062] PM: Adding info for No Bus:ttyD14
[   14.396061] device: 'ttyD15': device_add
[   14.400064] PM: Adding info for No Bus:ttyD15
[   14.404061] device: 'ttyD16': device_add
[   14.408065] PM: Adding info for No Bus:ttyD16
[   14.412053] device: 'ttyD17': device_add
[   14.416061] PM: Adding info for No Bus:ttyD17
[   14.420052] device: 'ttyD18': device_add
[   14.424063] PM: Adding info for No Bus:ttyD18
[   14.428052] device: 'ttyD19': device_add
[   14.432070] PM: Adding info for No Bus:ttyD19
[   14.436053] device: 'ttyD20': device_add
[   14.440063] PM: Adding info for No Bus:ttyD20
[   14.444052] device: 'ttyD21': device_add
[   14.448076] PM: Adding info for No Bus:ttyD21
[   14.452053] device: 'ttyD22': device_add
[   14.456061] PM: Adding info for No Bus:ttyD22
[   14.460053] device: 'ttyD23': device_add
[   14.464061] PM: Adding info for No Bus:ttyD23
[   14.468052] device: 'ttyD24': device_add
[   14.472061] PM: Adding info for No Bus:ttyD24
[   14.476053] device: 'ttyD25': device_add
[   14.480070] PM: Adding info for No Bus:ttyD25
[   14.484054] device: 'ttyD26': device_add
[   14.488065] PM: Adding info for No Bus:ttyD26
[   14.492053] device: 'ttyD27': device_add
[   14.496061] PM: Adding info for No Bus:ttyD27
[   14.500052] device: 'ttyD28': device_add
[   14.504062] PM: Adding info for No Bus:ttyD28
[   14.508061] device: 'ttyD29': device_add
[   14.512066] PM: Adding info for No Bus:ttyD29
[   14.516054] device: 'ttyD30': device_add
[   14.520062] PM: Adding info for No Bus:ttyD30
[   14.524052] device: 'ttyD31': device_add
[   14.528071] PM: Adding info for No Bus:ttyD31
[   14.532054] device: 'ttyD32': device_add
[   14.536067] PM: Adding info for No Bus:ttyD32
[   14.540053] device: 'ttyD33': device_add
[   14.544062] PM: Adding info for No Bus:ttyD33
[   14.548053] device: 'ttyD34': device_add
[   14.552063] PM: Adding info for No Bus:ttyD34
[   14.556052] device: 'ttyD35': device_add
[   14.560063] PM: Adding info for No Bus:ttyD35
[   14.564053] device: 'ttyD36': device_add
[   14.568063] PM: Adding info for No Bus:ttyD36
[   14.572053] device: 'ttyD37': device_add
[   14.576075] PM: Adding info for No Bus:ttyD37
[   14.580054] device: 'ttyD38': device_add
[   14.584066] PM: Adding info for No Bus:ttyD38
[   14.588053] device: 'ttyD39': device_add
[   14.592076] PM: Adding info for No Bus:ttyD39
[   14.596054] device: 'ttyD40': device_add
[   14.600064] PM: Adding info for No Bus:ttyD40
[   14.604052] device: 'ttyD41': device_add
[   14.608089] PM: Adding info for No Bus:ttyD41
[   14.612061] device: 'ttyD42': device_add
[   14.616077] PM: Adding info for No Bus:ttyD42
[   14.620061] device: 'ttyD43': device_add
[   14.624076] PM: Adding info for No Bus:ttyD43
[   14.628054] device: 'ttyD44': device_add
[   14.632067] PM: Adding info for No Bus:ttyD44
[   14.636052] device: 'ttyD45': device_add
[   14.640064] PM: Adding info for No Bus:ttyD45
[   14.644053] device: 'ttyD46': device_add
[   14.648064] PM: Adding info for No Bus:ttyD46
[   14.652052] device: 'ttyD47': device_add
[   14.656064] PM: Adding info for No Bus:ttyD47
[   14.660053] device: 'ttyD48': device_add
[   14.664064] PM: Adding info for No Bus:ttyD48
[   14.668052] device: 'ttyD49': device_add
[   14.672073] PM: Adding info for No Bus:ttyD49
[   14.676054] device: 'ttyD50': device_add
[   14.680069] PM: Adding info for No Bus:ttyD50
[   14.684053] device: 'ttyD51': device_add
[   14.688064] PM: Adding info for No Bus:ttyD51
[   14.692053] device: 'ttyD52': device_add
[   14.696063] PM: Adding info for No Bus:ttyD52
[   14.700052] device: 'ttyD53': device_add
[   14.704063] PM: Adding info for No Bus:ttyD53
[   14.708052] device: 'ttyD54': device_add
[   14.712074] PM: Adding info for No Bus:ttyD54
[   14.716061] device: 'ttyD55': device_add
[   14.720079] PM: Adding info for No Bus:ttyD55
[   14.724054] device: 'ttyD56': device_add
[   14.728068] PM: Adding info for No Bus:ttyD56
[   14.732052] device: 'ttyD57': device_add
[   14.736075] PM: Adding info for No Bus:ttyD57
[   14.740054] device: 'ttyD58': device_add
[   14.744068] PM: Adding info for No Bus:ttyD58
[   14.748053] device: 'ttyD59': device_add
[   14.752064] PM: Adding info for No Bus:ttyD59
[   14.756052] device: 'ttyD60': device_add
[   14.760064] PM: Adding info for No Bus:ttyD60
[   14.764053] device: 'ttyD61': device_add
[   14.768074] PM: Adding info for No Bus:ttyD61
[   14.772054] device: 'ttyD62': device_add
[   14.776069] PM: Adding info for No Bus:ttyD62
[   14.780052] device: 'ttyD63': device_add
[   14.784065] PM: Adding info for No Bus:ttyD63
[   14.788052] device: 'ttyD64': device_add
[   14.792066] PM: Adding info for No Bus:ttyD64
[   14.796053] device: 'ttyD65': device_add
[   14.800066] PM: Adding info for No Bus:ttyD65
[   14.804053] device: 'ttyD66': device_add
[   14.808065] PM: Adding info for No Bus:ttyD66
[   14.812053] device: 'ttyD67': device_add
[   14.816092] PM: Adding info for No Bus:ttyD67
[   14.820062] device: 'ttyD68': device_add
[   14.824073] PM: Adding info for No Bus:ttyD68
[   14.828053] device: 'ttyD69': device_add
[   14.832066] PM: Adding info for No Bus:ttyD69
[   14.836052] device: 'ttyD70': device_add
[   14.840065] PM: Adding info for No Bus:ttyD70
[   14.844061] device: 'ttyD71': device_add
[   14.848070] PM: Adding info for No Bus:ttyD71
[   14.852053] device: 'ttyD72': device_add
[   14.856066] PM: Adding info for No Bus:ttyD72
[   14.860053] device: 'ttyD73': device_add
[   14.864076] PM: Adding info for No Bus:ttyD73
[   14.868054] device: 'ttyD74': device_add
[   14.872069] PM: Adding info for No Bus:ttyD74
[   14.876052] device: 'ttyD75': device_add
[   14.880066] PM: Adding info for No Bus:ttyD75
[   14.884063] device: 'ttyD76': device_add
[   14.888071] PM: Adding info for No Bus:ttyD76
[   14.892053] device: 'ttyD77': device_add
[   14.896066] PM: Adding info for No Bus:ttyD77
[   14.900052] device: 'ttyD78': device_add
[   14.904066] PM: Adding info for No Bus:ttyD78
[   14.908052] device: 'ttyD79': device_add
[   14.912077] PM: Adding info for No Bus:ttyD79
[   14.916053] device: 'ttyD80': device_add
[   14.920070] PM: Adding info for No Bus:ttyD80
[   14.924060] device: 'ttyD81': device_add
[   14.928072] PM: Adding info for No Bus:ttyD81
[   14.932053] device: 'ttyD82': device_add
[   14.936070] PM: Adding info for No Bus:ttyD82
[   14.940053] device: 'ttyD83': device_add
[   14.944067] PM: Adding info for No Bus:ttyD83
[   14.948052] device: 'ttyD84': device_add
[   14.952067] PM: Adding info for No Bus:ttyD84
[   14.956053] device: 'ttyD85': device_add
[   14.960077] PM: Adding info for No Bus:ttyD85
[   14.964054] device: 'ttyD86': device_add
[   14.968071] PM: Adding info for No Bus:ttyD86
[   14.972052] device: 'ttyD87': device_add
[   14.976069] PM: Adding info for No Bus:ttyD87
[   14.980053] device: 'ttyD88': device_add
[   14.984068] PM: Adding info for No Bus:ttyD88
[   14.988053] device: 'ttyD89': device_add
[   14.992068] PM: Adding info for No Bus:ttyD89
[   14.996053] device: 'ttyD90': device_add
[   15.000070] PM: Adding info for No Bus:ttyD90
[   15.004053] device: 'ttyD91': device_add
[   15.008080] PM: Adding info for No Bus:ttyD91
[   15.012054] device: 'ttyD92': device_add
[   15.016073] PM: Adding info for No Bus:ttyD92
[   15.020053] device: 'ttyD93': device_add
[   15.024071] PM: Adding info for No Bus:ttyD93
[   15.028061] device: 'ttyD94': device_add
[   15.032086] PM: Adding info for No Bus:ttyD94
[   15.036054] device: 'ttyD95': device_add
[   15.040071] PM: Adding info for No Bus:ttyD95
[   15.044053] device: 'ttyD96': device_add
[   15.048070] PM: Adding info for No Bus:ttyD96
[   15.052052] device: 'ttyD97': device_add
[   15.056080] PM: Adding info for No Bus:ttyD97
[   15.060054] device: 'ttyD98': device_add
[   15.064068] PM: Adding info for No Bus:ttyD98
[   15.068061] device: 'ttyD99': device_add
[   15.072076] PM: Adding info for No Bus:ttyD99
[   15.076053] device: 'ttyD100': device_add
[   15.080071] PM: Adding info for No Bus:ttyD100
[   15.084053] device: 'ttyD101': device_add
[   15.088071] PM: Adding info for No Bus:ttyD101
[   15.092053] device: 'ttyD102': device_add
[   15.096071] PM: Adding info for No Bus:ttyD102
[   15.100053] device: 'ttyD103': device_add
[   15.104081] PM: Adding info for No Bus:ttyD103
[   15.108054] device: 'ttyD104': device_add
[   15.112074] PM: Adding info for No Bus:ttyD104
[   15.116053] device: 'ttyD105': device_add
[   15.120071] PM: Adding info for No Bus:ttyD105
[   15.124053] device: 'ttyD106': device_add
[   15.128071] PM: Adding info for No Bus:ttyD106
[   15.132061] device: 'ttyD107': device_add
[   15.136077] PM: Adding info for No Bus:ttyD107
[   15.140054] device: 'ttyD108': device_add
[   15.144072] PM: Adding info for No Bus:ttyD108
[   15.148053] device: 'ttyD109': device_add
[   15.152082] PM: Adding info for No Bus:ttyD109
[   15.156054] device: 'ttyD110': device_add
[   15.160076] PM: Adding info for No Bus:ttyD110
[   15.164053] device: 'ttyD111': device_add
[   15.168073] PM: Adding info for No Bus:ttyD111
[   15.172053] device: 'ttyD112': device_add
[   15.176088] PM: Adding info for No Bus:ttyD112
[   15.180054] device: 'ttyD113': device_add
[   15.184074] PM: Adding info for No Bus:ttyD113
[   15.188053] device: 'ttyD114': device_add
[   15.192076] PM: Adding info for No Bus:ttyD114
[   15.196052] device: 'ttyD115': device_add
[   15.200084] PM: Adding info for No Bus:ttyD115
[   15.204055] device: 'ttyD116': device_add
[   15.208078] PM: Adding info for No Bus:ttyD116
[   15.212053] device: 'ttyD117': device_add
[   15.216075] PM: Adding info for No Bus:ttyD117
[   15.220053] device: 'ttyD118': device_add
[   15.224086] PM: Adding info for No Bus:ttyD118
[   15.228054] device: 'ttyD119': device_add
[   15.236067] PM: Adding info for No Bus:ttyD119
[   15.240061] device: 'ttyD120': device_add
[   15.244079] PM: Adding info for No Bus:ttyD120
[   15.248053] device: 'ttyD121': device_add
[   15.252088] PM: Adding info for No Bus:ttyD121
[   15.256055] device: 'ttyD122': device_add
[   15.260081] PM: Adding info for No Bus:ttyD122
[   15.264053] device: 'ttyD123': device_add
[   15.268075] PM: Adding info for No Bus:ttyD123
[   15.272053] device: 'ttyD124': device_add
[   15.276076] PM: Adding info for No Bus:ttyD124
[   15.280053] device: 'ttyD125': device_add
[   15.284075] PM: Adding info for No Bus:ttyD125
[   15.288053] device: 'ttyD126': device_add
[   15.292075] PM: Adding info for No Bus:ttyD126
[   15.296062] device: 'ttyD127': device_add
[   15.300089] PM: Adding info for No Bus:ttyD127
[   15.304055] device: 'ttyD128': device_add
[   15.308080] PM: Adding info for No Bus:ttyD128
[   15.312053] device: 'ttyD129': device_add
[   15.316076] PM: Adding info for No Bus:ttyD129
[   15.320053] device: 'ttyD130': device_add
[   15.324088] PM: Adding info for No Bus:ttyD130
[   15.328054] device: 'ttyD131': device_add
[   15.332080] PM: Adding info for No Bus:ttyD131
[   15.336053] device: 'ttyD132': device_add
[   15.340077] PM: Adding info for No Bus:ttyD132
[   15.344061] device: 'ttyD133': device_add
[   15.348091] PM: Adding info for No Bus:ttyD133
[   15.352054] device: 'ttyD134': device_add
[   15.356083] PM: Adding info for No Bus:ttyD134
[   15.360053] device: 'ttyD135': device_add
[   15.364078] PM: Adding info for No Bus:ttyD135
[   15.368053] device: 'ttyD136': device_add
[   15.372078] PM: Adding info for No Bus:ttyD136
[   15.376053] device: 'ttyD137': device_add
[   15.380078] PM: Adding info for No Bus:ttyD137
[   15.384053] device: 'ttyD138': device_add
[   15.388079] PM: Adding info for No Bus:ttyD138
[   15.392053] device: 'ttyD139': device_add
[   15.396088] PM: Adding info for No Bus:ttyD139
[   15.400055] device: 'ttyD140': device_add
[   15.404082] PM: Adding info for No Bus:ttyD140
[   15.408053] device: 'ttyD141': device_add
[   15.412078] PM: Adding info for No Bus:ttyD141
[   15.416053] device: 'ttyD142': device_add
[   15.420078] PM: Adding info for No Bus:ttyD142
[   15.424053] device: 'ttyD143': device_add
[   15.428079] PM: Adding info for No Bus:ttyD143
[   15.432053] device: 'ttyD144': device_add
[   15.436079] PM: Adding info for No Bus:ttyD144
[   15.440053] device: 'ttyD145': device_add
[   15.444089] PM: Adding info for No Bus:ttyD145
[   15.448063] device: 'ttyD146': device_add
[   15.452087] PM: Adding info for No Bus:ttyD146
[   15.456054] device: 'ttyD147': device_add
[   15.460080] PM: Adding info for No Bus:ttyD147
[   15.464053] device: 'ttyD148': device_add
[   15.468080] PM: Adding info for No Bus:ttyD148
[   15.472064] device: 'ttyD149': device_add
[   15.476084] PM: Adding info for No Bus:ttyD149
[   15.480055] device: 'ttyD150': device_add
[   15.484081] PM: Adding info for No Bus:ttyD150
[   15.488053] device: 'ttyD151': device_add
[   15.492090] PM: Adding info for No Bus:ttyD151
[   15.496055] device: 'ttyD152': device_add
[   15.500085] PM: Adding info for No Bus:ttyD152
[   15.508020] device: 'ttyD153': device_add
[   15.512081] PM: Adding info for No Bus:ttyD153
[   15.516053] device: 'ttyD154': device_add
[   15.520082] PM: Adding info for No Bus:ttyD154
[   15.524063] device: 'ttyD155': device_add
[   15.528087] PM: Adding info for No Bus:ttyD155
[   15.532055] device: 'ttyD156': device_add
[   15.536082] PM: Adding info for No Bus:ttyD156
[   15.540054] device: 'ttyD157': device_add
[   15.544093] PM: Adding info for No Bus:ttyD157
[   15.548056] device: 'ttyD158': device_add
[   15.552085] PM: Adding info for No Bus:ttyD158
[   15.556062] device: 'ttyD159': device_add
[   15.560088] PM: Adding info for No Bus:ttyD159
[   15.564055] device: 'ttyD160': device_add
[   15.568083] PM: Adding info for No Bus:ttyD160
[   15.572053] device: 'ttyD161': device_add
[   15.576082] PM: Adding info for No Bus:ttyD161
[   15.580053] device: 'ttyD162': device_add
[   15.584083] PM: Adding info for No Bus:ttyD162
[   15.588053] device: 'ttyD163': device_add
[   15.592091] PM: Adding info for No Bus:ttyD163
[   15.596055] device: 'ttyD164': device_add
[   15.600087] PM: Adding info for No Bus:ttyD164
[   15.604054] device: 'ttyD165': device_add
[   15.608082] PM: Adding info for No Bus:ttyD165
[   15.612053] device: 'ttyD166': device_add
[   15.616083] PM: Adding info for No Bus:ttyD166
[   15.620054] device: 'ttyD167': device_add
[   15.624097] PM: Adding info for No Bus:ttyD167
[   15.628055] device: 'ttyD168': device_add
[   15.632084] PM: Adding info for No Bus:ttyD168
[   15.636053] device: 'ttyD169': device_add
[   15.640094] PM: Adding info for No Bus:ttyD169
[   15.644055] device: 'ttyD170': device_add
[   15.648088] PM: Adding info for No Bus:ttyD170
[   15.652054] device: 'ttyD171': device_add
[   15.656083] PM: Adding info for No Bus:ttyD171
[   15.660063] device: 'ttyD172': device_add
[   15.664088] PM: Adding info for No Bus:ttyD172
[   15.668056] device: 'ttyD173': device_add
[   15.672086] PM: Adding info for No Bus:ttyD173
[   15.676054] device: 'ttyD174': device_add
[   15.680084] PM: Adding info for No Bus:ttyD174
[   15.684054] device: 'ttyD175': device_add
[   15.688095] PM: Adding info for No Bus:ttyD175
[   15.692055] device: 'ttyD176': device_add
[   15.696089] PM: Adding info for No Bus:ttyD176
[   15.700054] device: 'ttyD177': device_add
[   15.704086] PM: Adding info for No Bus:ttyD177
[   15.708053] device: 'ttyD178': device_add
[   15.712084] PM: Adding info for No Bus:ttyD178
[   15.716054] device: 'ttyD179': device_add
[   15.720084] PM: Adding info for No Bus:ttyD179
[   15.728034] device: 'ttyD180': device_add
[   15.732084] PM: Adding info for No Bus:ttyD180
[   15.736054] device: 'ttyD181': device_add
[   15.740096] PM: Adding info for No Bus:ttyD181
[   15.744055] device: 'ttyD182': device_add
[   15.748121] PM: Adding info for No Bus:ttyD182
[   15.752063] device: 'ttyD183': device_add
[   15.756101] PM: Adding info for No Bus:ttyD183
[   15.760054] device: 'ttyD184': device_add
[   15.764094] PM: Adding info for No Bus:ttyD184
[   15.768062] device: 'ttyD185': device_add
[   15.772105] PM: Adding info for No Bus:ttyD185
[   15.776055] device: 'ttyD186': device_add
[   15.780090] PM: Adding info for No Bus:ttyD186
[   15.784054] device: 'ttyD187': device_add
[   15.788098] PM: Adding info for No Bus:ttyD187
[   15.792055] device: 'ttyD188': device_add
[   15.796092] PM: Adding info for No Bus:ttyD188
[   15.800054] device: 'ttyD189': device_add
[   15.804087] PM: Adding info for No Bus:ttyD189
[   15.808053] device: 'ttyD190': device_add
[   15.812088] PM: Adding info for No Bus:ttyD190
[   15.816064] device: 'ttyD191': device_add
[   15.820094] PM: Adding info for No Bus:ttyD191
[   15.824054] device: 'ttyD192': device_add
[   15.828089] PM: Adding info for No Bus:ttyD192
[   15.832054] device: 'ttyD193': device_add
[   15.840024] PM: Adding info for No Bus:ttyD193
[   15.844055] device: 'ttyD194': device_add
[   15.848094] PM: Adding info for No Bus:ttyD194
[   15.852054] device: 'ttyD195': device_add
[   15.856089] PM: Adding info for No Bus:ttyD195
[   15.860054] device: 'ttyD196': device_add
[   15.864089] PM: Adding info for No Bus:ttyD196
[   15.868054] device: 'ttyD197': device_add
[   15.872090] PM: Adding info for No Bus:ttyD197
[   15.876062] device: 'ttyD198': device_add
[   15.880094] PM: Adding info for No Bus:ttyD198
[   15.884055] device: 'ttyD199': device_add
[   15.888101] PM: Adding info for No Bus:ttyD199
[   15.892055] device: 'ttyD200': device_add
[   15.896093] PM: Adding info for No Bus:ttyD200
[   15.900054] device: 'ttyD201': device_add
[   15.904089] PM: Adding info for No Bus:ttyD201
[   15.908054] device: 'ttyD202': device_add
[   15.912090] PM: Adding info for No Bus:ttyD202
[   15.916053] device: 'ttyD203': device_add
[   15.920101] PM: Adding info for No Bus:ttyD203
[   15.924055] device: 'ttyD204': device_add
[   15.928094] PM: Adding info for No Bus:ttyD204
[   15.932054] device: 'ttyD205': device_add
[   15.936101] PM: Adding info for No Bus:ttyD205
[   15.940055] device: 'ttyD206': device_add
[   15.944093] PM: Adding info for No Bus:ttyD206
[   15.948054] device: 'ttyD207': device_add
[   15.952089] PM: Adding info for No Bus:ttyD207
[   15.956054] device: 'ttyD208': device_add
[   15.960093] PM: Adding info for No Bus:ttyD208
[   15.964054] device: 'ttyD209': device_add
[   15.968090] PM: Adding info for No Bus:ttyD209
[   15.972054] device: 'ttyD210': device_add
[   15.976090] PM: Adding info for No Bus:ttyD210
[   15.980073] device: 'ttyD211': device_add
[   15.984107] PM: Adding info for No Bus:ttyD211
[   15.988056] device: 'ttyD212': device_add
[   15.992095] PM: Adding info for No Bus:ttyD212
[   15.996054] device: 'ttyD213': device_add
[   16.004033] PM: Adding info for No Bus:ttyD213
[   16.008054] device: 'ttyD214': device_add
[   16.012091] PM: Adding info for No Bus:ttyD214
[   16.016054] device: 'ttyD215': device_add
[   16.020091] PM: Adding info for No Bus:ttyD215
[   16.024054] device: 'ttyD216': device_add
[   16.028091] PM: Adding info for No Bus:ttyD216
[   16.032054] device: 'ttyD217': device_add
[   16.036100] PM: Adding info for No Bus:ttyD217
[   16.040055] device: 'ttyD218': device_add
[   16.044096] PM: Adding info for No Bus:ttyD218
[   16.048054] device: 'ttyD219': device_add
[   16.052091] PM: Adding info for No Bus:ttyD219
[   16.056054] device: 'ttyD220': device_add
[   16.060091] PM: Adding info for No Bus:ttyD220
[   16.064054] device: 'ttyD221': device_add
[   16.068092] PM: Adding info for No Bus:ttyD221
[   16.072065] device: 'ttyD222': device_add
[   16.076099] PM: Adding info for No Bus:ttyD222
[   16.080055] device: 'ttyD223': device_add
[   16.084102] PM: Adding info for No Bus:ttyD223
[   16.088063] device: 'ttyD224': device_add
[   16.092098] PM: Adding info for No Bus:ttyD224
[   16.096055] device: 'ttyD225': device_add
[   16.100093] PM: Adding info for No Bus:ttyD225
[   16.104054] device: 'ttyD226': device_add
[   16.108093] PM: Adding info for No Bus:ttyD226
[   16.112054] device: 'ttyD227': device_add
[   16.116093] PM: Adding info for No Bus:ttyD227
[   16.120053] device: 'ttyD228': device_add
[   16.124093] PM: Adding info for No Bus:ttyD228
[   16.128054] device: 'ttyD229': device_add
[   16.132103] PM: Adding info for No Bus:ttyD229
[   16.136055] device: 'ttyD230': device_add
[   16.140099] PM: Adding info for No Bus:ttyD230
[   16.144054] device: 'ttyD231': device_add
[   16.148093] PM: Adding info for No Bus:ttyD231
[   16.152054] device: 'ttyD232': device_add
[   16.156095] PM: Adding info for No Bus:ttyD232
[   16.160054] device: 'ttyD233': device_add
[   16.168068] PM: Adding info for No Bus:ttyD233
[   16.172054] device: 'ttyD234': device_add
[   16.176094] PM: Adding info for No Bus:ttyD234
[   16.180055] device: 'ttyD235': device_add
[   16.184106] PM: Adding info for No Bus:ttyD235
[   16.188056] device: 'ttyD236': device_add
[   16.192100] PM: Adding info for No Bus:ttyD236
[   16.196063] device: 'ttyD237': device_add
[   16.200101] PM: Adding info for No Bus:ttyD237
[   16.204055] device: 'ttyD238': device_add
[   16.208096] PM: Adding info for No Bus:ttyD238
[   16.212063] device: 'ttyD239': device_add
[   16.216105] PM: Adding info for No Bus:ttyD239
[   16.220055] device: 'ttyD240': device_add
[   16.224112] PM: Adding info for No Bus:ttyD240
[   16.228055] device: 'ttyD241': device_add
[   16.232106] PM: Adding info for No Bus:ttyD241
[   16.236055] device: 'ttyD242': device_add
[   16.240101] PM: Adding info for No Bus:ttyD242
[   16.244054] device: 'ttyD243': device_add
[   16.248097] PM: Adding info for No Bus:ttyD243
[   16.252054] device: 'ttyD244': device_add
[   16.256097] PM: Adding info for No Bus:ttyD244
[   16.260055] device: 'ttyD245': device_add
[   16.264096] PM: Adding info for No Bus:ttyD245
[   16.268054] device: 'ttyD246': device_add
[   16.276006] PM: Adding info for No Bus:ttyD246
[   16.280055] device: 'ttyD247': device_add
[   16.284114] PM: Adding info for No Bus:ttyD247
[   16.288055] device: 'ttyD248': device_add
[   16.292102] PM: Adding info for No Bus:ttyD248
[   16.296054] device: 'ttyD249': device_add
[   16.300098] PM: Adding info for No Bus:ttyD249
[   16.304063] device: 'ttyD250': device_add
[   16.308104] PM: Adding info for No Bus:ttyD250
[   16.312055] device: 'ttyD251': device_add
[   16.316099] PM: Adding info for No Bus:ttyD251
[   16.320054] device: 'ttyD252': device_add
[   16.324099] PM: Adding info for No Bus:ttyD252
[   16.328054] device: 'ttyD253': device_add
[   16.332110] PM: Adding info for No Bus:ttyD253
[   16.336056] device: 'ttyD254': device_add
[   16.340104] PM: Adding info for No Bus:ttyD254
[   16.344054] device: 'ttyD255': device_add
[   16.348100] PM: Adding info for No Bus:ttyD255
[   16.352068] device: 'digi_ctl0': device_add
[   16.356085] PM: Adding info for No Bus:digi_ctl0
[   16.360055] device: 'digi_ctl1': device_add
[   16.364085] PM: Adding info for No Bus:digi_ctl1
[   16.368054] device: 'digi_ctl2': device_add
[   16.372085] PM: Adding info for No Bus:digi_ctl2
[   16.376054] device: 'digi_ctl3': device_add
[   16.380096] PM: Adding info for No Bus:digi_ctl3
[   16.384056] device: 'digi_ctl4': device_add
[   16.388090] PM: Adding info for No Bus:digi_ctl4
[   16.392054] device: 'digi_ctl5': device_add
[   16.396101] PM: Adding info for No Bus:digi_ctl5
[   16.400056] device: 'digi_ctl6': device_add
[   16.404088] PM: Adding info for No Bus:digi_ctl6
[   16.408063] device: 'digi_ctl7': device_add
[   16.412091] PM: Adding info for No Bus:digi_ctl7
[   16.416055] device: 'digi_ctl8': device_add
[   16.420086] PM: Adding info for No Bus:digi_ctl8
[   16.424054] device: 'digi_ctl9': device_add
[   16.428095] PM: Adding info for No Bus:digi_ctl9
[   16.432063] device: 'digi_ctl10': device_add
[   16.436094] PM: Adding info for No Bus:digi_ctl10
[   16.440056] device: 'digi_ctl11': device_add
[   16.444086] PM: Adding info for No Bus:digi_ctl11
[   16.448054] device: 'digi_ctl12': device_add
[   16.452086] PM: Adding info for No Bus:digi_ctl12
[   16.456054] device: 'digi_ctl13': device_add
[   16.460087] PM: Adding info for No Bus:digi_ctl13
[   16.464054] device: 'digi_ctl14': device_add
[   16.468087] PM: Adding info for No Bus:digi_ctl14
[   16.472055] device: 'digi_ctl15': device_add
[   16.476099] PM: Adding info for No Bus:digi_ctl15
[   16.480055] device: 'digi_ctl16': device_add
[   16.484091] PM: Adding info for No Bus:digi_ctl16
[   16.488054] device: 'digi_ctl17': device_add
[   16.492089] PM: Adding info for No Bus:digi_ctl17
[   16.496066] device: 'digi_ctl18': device_add
[   16.500094] PM: Adding info for No Bus:digi_ctl18
[   16.504055] device: 'digi_ctl19': device_add
[   16.508090] PM: Adding info for No Bus:digi_ctl19
[   16.512063] device: 'digi_ctl20': device_add
[   16.516094] PM: Adding info for No Bus:digi_ctl20
[   16.520055] device: 'digi_ctl21': device_add
[   16.524100] PM: Adding info for No Bus:digi_ctl21
[   16.528056] device: 'digi_ctl22': device_add
[   16.532096] PM: Adding info for No Bus:digi_ctl22
[   16.536054] device: 'digi_ctl23': device_add
[   16.540091] PM: Adding info for No Bus:digi_ctl23
[   16.544054] device: 'digi_ctl24': device_add
[   16.548091] PM: Adding info for No Bus:digi_ctl24
[   16.552054] device: 'digi_ctl25': device_add
[   16.556091] PM: Adding info for No Bus:digi_ctl25
[   16.560055] device: 'digi_ctl26': device_add
[   16.564091] PM: Adding info for No Bus:digi_ctl26
[   16.568054] device: 'digi_ctl27': device_add
[   16.572102] PM: Adding info for No Bus:digi_ctl27
[   16.576056] device: 'digi_ctl28': device_add
[   16.580097] PM: Adding info for No Bus:digi_ctl28
[   16.584055] device: 'digi_ctl29': device_add
[   16.588092] PM: Adding info for No Bus:digi_ctl29
[   16.592055] device: 'digi_ctl30': device_add
[   16.596093] PM: Adding info for No Bus:digi_ctl30
[   16.600054] device: 'digi_ctl31': device_add
[   16.604094] PM: Adding info for No Bus:digi_ctl31
[   16.608055] device: 'digi_ctl32': device_add
[   16.612093] PM: Adding info for No Bus:digi_ctl32
[   16.616063] device: 'digi_ctl33': device_add
[   16.620109] PM: Adding info for No Bus:digi_ctl33
[   16.624056] device: 'digi_ctl34': device_add
[   16.628099] PM: Adding info for No Bus:digi_ctl34
[   16.632055] device: 'digi_ctl35': device_add
[   16.636094] PM: Adding info for No Bus:digi_ctl35
[   16.640054] device: 'digi_ctl36': device_add
[   16.644094] PM: Adding info for No Bus:digi_ctl36
[   16.648054] device: 'digi_ctl37': device_add
[   16.652094] PM: Adding info for No Bus:digi_ctl37
[   16.656063] device: 'digi_ctl38': device_add
[   16.660100] PM: Adding info for No Bus:digi_ctl38
[   16.664056] device: 'digi_ctl39': device_add
[   16.668120] PM: Adding info for No Bus:digi_ctl39
[   16.672056] device: 'digi_ctl40': device_add
[   16.676100] PM: Adding info for No Bus:digi_ctl40
[   16.680054] device: 'digi_ctl41': device_add
[   16.684110] PM: Adding info for No Bus:digi_ctl41
[   16.688055] device: 'digi_ctl42': device_add
[   16.692101] PM: Adding info for No Bus:digi_ctl42
[   16.696054] device: 'digi_ctl43': device_add
[   16.700095] PM: Adding info for No Bus:digi_ctl43
[   16.704054] device: 'digi_ctl44': device_add
[   16.708095] PM: Adding info for No Bus:digi_ctl44
[   16.712054] device: 'digi_ctl45': device_add
[   16.716105] PM: Adding info for No Bus:digi_ctl45
[   16.720063] device: 'digi_ctl46': device_add
[   16.724104] PM: Adding info for No Bus:digi_ctl46
[   16.728056] device: 'digi_ctl47': device_add
[   16.732097] PM: Adding info for No Bus:digi_ctl47
[   16.736054] device: 'digi_ctl48': device_add
[   16.740098] PM: Adding info for No Bus:digi_ctl48
[   16.744054] device: 'digi_ctl49': device_add
[   16.748097] PM: Adding info for No Bus:digi_ctl49
[   16.752054] device: 'digi_ctl50': device_add
[   16.756098] PM: Adding info for No Bus:digi_ctl50
[   16.760054] device: 'digi_ctl51': device_add
[   16.764107] PM: Adding info for No Bus:digi_ctl51
[   16.768056] device: 'digi_ctl52': device_add
[   16.772101] PM: Adding info for No Bus:digi_ctl52
[   16.776054] device: 'digi_ctl53': device_add
[   16.780098] PM: Adding info for No Bus:digi_ctl53
[   16.784054] device: 'digi_ctl54': device_add
[   16.788099] PM: Adding info for No Bus:digi_ctl54
[   16.792054] device: 'digi_ctl55': device_add
[   16.796099] PM: Adding info for No Bus:digi_ctl55
[   16.800054] device: 'digi_ctl56': device_add
[   16.804099] PM: Adding info for No Bus:digi_ctl56
[   16.808054] device: 'digi_ctl57': device_add
[   16.812109] PM: Adding info for No Bus:digi_ctl57
[   16.816068] device: 'digi_ctl58': device_add
[   16.820110] PM: Adding info for No Bus:digi_ctl58
[   16.824064] device: 'digi_ctl59': device_add
[   16.828106] PM: Adding info for No Bus:digi_ctl59
[   16.832056] device: 'digi_ctl60': device_add
[   16.840110] PM: Adding info for No Bus:digi_ctl60
[   16.844056] device: 'digi_ctl61': device_add
[   16.848103] PM: Adding info for No Bus:digi_ctl61
[   16.852055] device: 'digi_ctl62': device_add
[   16.856100] PM: Adding info for No Bus:digi_ctl62
[   16.860055] device: 'digi_ctl63': device_add
[   16.864110] PM: Adding info for No Bus:digi_ctl63
[   16.868056] device: 'digi_ctl64': device_add
[   16.872105] PM: Adding info for No Bus:digi_ctl64
[   16.876055] device: 'digi_ctl65': device_add
[   16.880101] PM: Adding info for No Bus:digi_ctl65
[   16.884064] device: 'digi_ctl66': device_add
[   16.888106] PM: Adding info for No Bus:digi_ctl66
[   16.892055] device: 'digi_ctl67': device_add
[   16.900037] PM: Adding info for No Bus:digi_ctl67
[   16.904054] device: 'digi_ctl68': device_add
[   16.908123] PM: Adding info for No Bus:digi_ctl68
[   16.912055] device: 'digi_ctl69': device_add
[   16.916123] PM: Adding info for No Bus:digi_ctl69
[   16.920056] device: 'digi_ctl70': device_add
[   16.924112] PM: Adding info for No Bus:digi_ctl70
[   16.928055] device: 'digi_ctl71': device_add
[   16.932104] PM: Adding info for No Bus:digi_ctl71
[   16.936063] device: 'digi_ctl72': device_add
[   16.940110] PM: Adding info for No Bus:digi_ctl72
[   16.944055] device: 'digi_ctl73': device_add
[   16.948103] PM: Adding info for No Bus:digi_ctl73
[   16.952054] device: 'digi_ctl74': device_add
[   16.960013] PM: Adding info for No Bus:digi_ctl74
[   16.964054] device: 'digi_ctl75': device_add
[   16.968112] PM: Adding info for No Bus:digi_ctl75
[   16.972056] device: 'digi_ctl76': device_add
[   16.976106] PM: Adding info for No Bus:digi_ctl76
[   16.980055] device: 'digi_ctl77': device_add
[   16.984106] PM: Adding info for No Bus:digi_ctl77
[   16.988055] device: 'digi_ctl78': device_add
[   16.992120] PM: Adding info for No Bus:digi_ctl78
[   16.996056] device: 'digi_ctl79': device_add
[   17.000107] PM: Adding info for No Bus:digi_ctl79
[   17.004055] device: 'digi_ctl80': device_add
[   17.008104] PM: Adding info for No Bus:digi_ctl80
[   17.012055] device: 'digi_ctl81': device_add
[   17.016114] PM: Adding info for No Bus:digi_ctl81
[   17.020066] device: 'digi_ctl82': device_add
[   17.024111] PM: Adding info for No Bus:digi_ctl82
[   17.028056] device: 'digi_ctl83': device_add
[   17.032105] PM: Adding info for No Bus:digi_ctl83
[   17.036055] device: 'digi_ctl84': device_add
[   17.040105] PM: Adding info for No Bus:digi_ctl84
[   17.044064] device: 'digi_ctl85': device_add
[   17.048111] PM: Adding info for No Bus:digi_ctl85
[   17.052055] device: 'digi_ctl86': device_add
[   17.056106] PM: Adding info for No Bus:digi_ctl86
[   17.060055] device: 'digi_ctl87': device_add
[   17.064115] PM: Adding info for No Bus:digi_ctl87
[   17.068056] device: 'digi_ctl88': device_add
[   17.072110] PM: Adding info for No Bus:digi_ctl88
[   17.076055] device: 'digi_ctl89': device_add
[   17.080106] PM: Adding info for No Bus:digi_ctl89
[   17.084055] device: 'digi_ctl90': device_add
[   17.088106] PM: Adding info for No Bus:digi_ctl90
[   17.092054] device: 'digi_ctl91': device_add
[   17.096106] PM: Adding info for No Bus:digi_ctl91
[   17.100055] device: 'digi_ctl92': device_add
[   17.104108] PM: Adding info for No Bus:digi_ctl92
[   17.108055] device: 'digi_ctl93': device_add
[   17.112116] PM: Adding info for No Bus:digi_ctl93
[   17.116064] device: 'digi_ctl94': device_add
[   17.120116] PM: Adding info for No Bus:digi_ctl94
[   17.124056] device: 'digi_ctl95': device_add
[   17.128108] PM: Adding info for No Bus:digi_ctl95
[   17.132054] device: 'digi_ctl96': device_add
[   17.136108] PM: Adding info for No Bus:digi_ctl96
[   17.140054] device: 'digi_ctl97': device_add
[   17.144108] PM: Adding info for No Bus:digi_ctl97
[   17.148064] device: 'digi_ctl98': device_add
[   17.152114] PM: Adding info for No Bus:digi_ctl98
[   17.156056] device: 'digi_ctl99': device_add
[   17.160118] PM: Adding info for No Bus:digi_ctl99
[   17.164056] device: 'digi_ctl100': device_add
[   17.168116] PM: Adding info for No Bus:digi_ctl100
[   17.172055] device: 'digi_ctl101': device_add
[   17.176110] PM: Adding info for No Bus:digi_ctl101
[   17.180055] device: 'digi_ctl102': device_add
[   17.184110] PM: Adding info for No Bus:digi_ctl102
[   17.188054] device: 'digi_ctl103': device_add
[   17.192127] PM: Adding info for No Bus:digi_ctl103
[   17.196056] device: 'digi_ctl104': device_add
[   17.200111] PM: Adding info for No Bus:digi_ctl104
[   17.204055] device: 'digi_ctl105': device_add
[   17.208119] PM: Adding info for No Bus:digi_ctl105
[   17.212056] device: 'digi_ctl106': device_add
[   17.216115] PM: Adding info for No Bus:digi_ctl106
[   17.220055] device: 'digi_ctl107': device_add
[   17.224111] PM: Adding info for No Bus:digi_ctl107
[   17.228055] device: 'digi_ctl108': device_add
[   17.232111] PM: Adding info for No Bus:digi_ctl108
[   17.236055] device: 'digi_ctl109': device_add
[   17.240112] PM: Adding info for No Bus:digi_ctl109
[   17.244055] device: 'digi_ctl110': device_add
[   17.248110] PM: Adding info for No Bus:digi_ctl110
[   17.252064] device: 'digi_ctl111': device_add
[   17.256127] PM: Adding info for No Bus:digi_ctl111
[   17.260056] device: 'digi_ctl112': device_add
[   17.264117] PM: Adding info for No Bus:digi_ctl112
[   17.268055] device: 'digi_ctl113': device_add
[   17.272111] PM: Adding info for No Bus:digi_ctl113
[   17.276055] device: 'digi_ctl114': device_add
[   17.280124] PM: Adding info for No Bus:digi_ctl114
[   17.284057] device: 'digi_ctl115': device_add
[   17.288118] PM: Adding info for No Bus:digi_ctl115
[   17.292055] device: 'digi_ctl116': device_add
[   17.296113] PM: Adding info for No Bus:digi_ctl116
[   17.300055] device: 'digi_ctl117': device_add
[   17.308088] PM: Adding info for No Bus:digi_ctl117
[   17.312056] device: 'digi_ctl118': device_add
[   17.316119] PM: Adding info for No Bus:digi_ctl118
[   17.320055] device: 'digi_ctl119': device_add
[   17.324114] PM: Adding info for No Bus:digi_ctl119
[   17.328055] device: 'digi_ctl120': device_add
[   17.336037] PM: Adding info for No Bus:digi_ctl120
[   17.340054] device: 'digi_ctl121': device_add
[   17.344116] PM: Adding info for No Bus:digi_ctl121
[   17.348064] device: 'digi_ctl122': device_add
[   17.352119] PM: Adding info for No Bus:digi_ctl122
[   17.356056] device: 'digi_ctl123': device_add
[   17.364014] PM: Adding info for No Bus:digi_ctl123
[   17.368063] device: 'digi_ctl124': device_add
[   17.372133] PM: Adding info for No Bus:digi_ctl124
[   17.376057] device: 'digi_ctl125': device_add
[   17.380120] PM: Adding info for No Bus:digi_ctl125
[   17.384055] device: 'digi_ctl126': device_add
[   17.392004] PM: Adding info for No Bus:digi_ctl126
[   17.396054] device: 'digi_ctl127': device_add
[   17.400115] PM: Adding info for No Bus:digi_ctl127
[   17.404055] device: 'digi_ctl128': device_add
[   17.408115] PM: Adding info for No Bus:digi_ctl128
[   17.412055] device: 'digi_ctl129': device_add
[   17.416128] PM: Adding info for No Bus:digi_ctl129
[   17.420056] device: 'digi_ctl130': device_add
[   17.424123] PM: Adding info for No Bus:digi_ctl130
[   17.428055] device: 'digi_ctl131': device_add
[   17.432117] PM: Adding info for No Bus:digi_ctl131
[   17.436055] device: 'digi_ctl132': device_add
[   17.440116] PM: Adding info for No Bus:digi_ctl132
[   17.444054] device: 'digi_ctl133': device_add
[   17.448116] PM: Adding info for No Bus:digi_ctl133
[   17.452054] device: 'digi_ctl134': device_add
[   17.456117] PM: Adding info for No Bus:digi_ctl134
[   17.460055] device: 'digi_ctl135': device_add
[   17.464126] PM: Adding info for No Bus:digi_ctl135
[   17.468056] device: 'digi_ctl136': device_add
[   17.472123] PM: Adding info for No Bus:digi_ctl136
[   17.476064] device: 'digi_ctl137': device_add
[   17.480124] PM: Adding info for No Bus:digi_ctl137
[   17.484056] device: 'digi_ctl138': device_add
[   17.488119] PM: Adding info for No Bus:digi_ctl138
[   17.492055] device: 'digi_ctl139': device_add
[   17.496121] PM: Adding info for No Bus:digi_ctl139
[   17.500055] device: 'digi_ctl140': device_add
[   17.504119] PM: Adding info for No Bus:digi_ctl140
[   17.508055] device: 'digi_ctl141': device_add
[   17.512128] PM: Adding info for No Bus:digi_ctl141
[   17.516057] device: 'digi_ctl142': device_add
[   17.520125] PM: Adding info for No Bus:digi_ctl142
[   17.524055] device: 'digi_ctl143': device_add
[   17.528119] PM: Adding info for No Bus:digi_ctl143
[   17.532055] device: 'digi_ctl144': device_add
[   17.536120] PM: Adding info for No Bus:digi_ctl144
[   17.540055] device: 'digi_ctl145': device_add
[   17.544121] PM: Adding info for No Bus:digi_ctl145
[   17.548066] device: 'digi_ctl146': device_add
[   17.552126] PM: Adding info for No Bus:digi_ctl146
[   17.556056] device: 'digi_ctl147': device_add
[   17.560130] PM: Adding info for No Bus:digi_ctl147
[   17.564056] device: 'digi_ctl148': device_add
[   17.568126] PM: Adding info for No Bus:digi_ctl148
[   17.572055] device: 'digi_ctl149': device_add
[   17.576122] PM: Adding info for No Bus:digi_ctl149
[   17.580071] device: 'digi_ctl150': device_add
[   17.584129] PM: Adding info for No Bus:digi_ctl150
[   17.588057] device: 'digi_ctl151': device_add
[   17.592139] PM: Adding info for No Bus:digi_ctl151
[   17.596057] device: 'digi_ctl152': device_add
[   17.600126] PM: Adding info for No Bus:digi_ctl152
[   17.604055] device: 'digi_ctl153': device_add
[   17.608132] PM: Adding info for No Bus:digi_ctl153
[   17.612057] device: 'digi_ctl154': device_add
[   17.616128] PM: Adding info for No Bus:digi_ctl154
[   17.620055] device: 'digi_ctl155': device_add
[   17.624123] PM: Adding info for No Bus:digi_ctl155
[   17.628055] device: 'digi_ctl156': device_add
[   17.632123] PM: Adding info for No Bus:digi_ctl156
[   17.636055] device: 'digi_ctl157': device_add
[   17.640122] PM: Adding info for No Bus:digi_ctl157
[   17.644055] device: 'digi_ctl158': device_add
[   17.648123] PM: Adding info for No Bus:digi_ctl158
[   17.652055] device: 'digi_ctl159': device_add
[   17.656134] PM: Adding info for No Bus:digi_ctl159
[   17.660057] device: 'digi_ctl160': device_add
[   17.664129] PM: Adding info for No Bus:digi_ctl160
[   17.668055] device: 'digi_ctl161': device_add
[   17.672124] PM: Adding info for No Bus:digi_ctl161
[   17.676055] device: 'digi_ctl162': device_add
[   17.680125] PM: Adding info for No Bus:digi_ctl162
[   17.684064] device: 'digi_ctl163': device_add
[   17.688132] PM: Adding info for No Bus:digi_ctl163
[   17.692056] device: 'digi_ctl164': device_add
[   17.696127] PM: Adding info for No Bus:digi_ctl164
[   17.700055] device: 'digi_ctl165': device_add
[   17.704137] PM: Adding info for No Bus:digi_ctl165
[   17.708057] device: 'digi_ctl166': device_add
[   17.712133] PM: Adding info for No Bus:digi_ctl166
[   17.716055] device: 'digi_ctl167': device_add
[   17.720145] PM: Adding info for No Bus:digi_ctl167
[   17.724057] device: 'digi_ctl168': device_add
[   17.728129] PM: Adding info for No Bus:digi_ctl168
[   17.732055] device: 'digi_ctl169': device_add
[   17.736128] PM: Adding info for No Bus:digi_ctl169
[   17.740055] device: 'digi_ctl170': device_add
[   17.744129] PM: Adding info for No Bus:digi_ctl170
[   17.748055] device: 'digi_ctl171': device_add
[   17.752142] PM: Adding info for No Bus:digi_ctl171
[   17.756057] device: 'digi_ctl172': device_add
[   17.760137] PM: Adding info for No Bus:digi_ctl172
[   17.764055] device: 'digi_ctl173': device_add
[   17.768131] PM: Adding info for No Bus:digi_ctl173
[   17.772055] device: 'digi_ctl174': device_add
[   17.776130] PM: Adding info for No Bus:digi_ctl174
[   17.780055] device: 'digi_ctl175': device_add
[   17.784131] PM: Adding info for No Bus:digi_ctl175
[   17.788063] device: 'digi_ctl176': device_add
[   17.792139] PM: Adding info for No Bus:digi_ctl176
[   17.796057] device: 'digi_ctl177': device_add
[   17.800142] PM: Adding info for No Bus:digi_ctl177
[   17.804065] device: 'digi_ctl178': device_add
[   17.808141] PM: Adding info for No Bus:digi_ctl178
[   17.812057] device: 'digi_ctl179': device_add
[   17.816151] PM: Adding info for No Bus:digi_ctl179
[   17.820056] device: 'digi_ctl180': device_add
[   17.824133] PM: Adding info for No Bus:digi_ctl180
[   17.828055] device: 'digi_ctl181': device_add
[   17.832132] PM: Adding info for No Bus:digi_ctl181
[   17.836055] device: 'digi_ctl182': device_add
[   17.840133] PM: Adding info for No Bus:digi_ctl182
[   17.844055] device: 'digi_ctl183': device_add
[   17.848142] PM: Adding info for No Bus:digi_ctl183
[   17.852057] device: 'digi_ctl184': device_add
[   17.856139] PM: Adding info for No Bus:digi_ctl184
[   17.860056] device: 'digi_ctl185': device_add
[   17.864133] PM: Adding info for No Bus:digi_ctl185
[   17.868055] device: 'digi_ctl186': device_add
[   17.872133] PM: Adding info for No Bus:digi_ctl186
[   17.876055] device: 'digi_ctl187': device_add
[   17.880146] PM: Adding info for No Bus:digi_ctl187
[   17.884057] device: 'digi_ctl188': device_add
[   17.888153] PM: Adding info for No Bus:digi_ctl188
[   17.892065] device: 'digi_ctl189': device_add
[   17.896150] PM: Adding info for No Bus:digi_ctl189
[   17.900057] device: 'digi_ctl190': device_add
[   17.904141] PM: Adding info for No Bus:digi_ctl190
[   17.908055] device: 'digi_ctl191': device_add
[   17.912136] PM: Adding info for No Bus:digi_ctl191
[   17.916055] device: 'digi_ctl192': device_add
[   17.920135] PM: Adding info for No Bus:digi_ctl192
[   17.924055] device: 'digi_ctl193': device_add
[   17.928135] PM: Adding info for No Bus:digi_ctl193
[   17.932055] device: 'digi_ctl194': device_add
[   17.936134] PM: Adding info for No Bus:digi_ctl194
[   17.940055] device: 'digi_ctl195': device_add
[   17.944146] PM: Adding info for No Bus:digi_ctl195
[   17.948057] device: 'digi_ctl196': device_add
[   17.952141] PM: Adding info for No Bus:digi_ctl196
[   17.956055] device: 'digi_ctl197': device_add
[   17.960135] PM: Adding info for No Bus:digi_ctl197
[   17.964055] device: 'digi_ctl198': device_add
[   17.968136] PM: Adding info for No Bus:digi_ctl198
[   17.972055] device: 'digi_ctl199': device_add
[   17.976136] PM: Adding info for No Bus:digi_ctl199
[   17.980055] device: 'digi_ctl200': device_add
[   17.984134] PM: Adding info for No Bus:digi_ctl200
[   17.988055] device: 'digi_ctl201': device_add
[   17.992145] PM: Adding info for No Bus:digi_ctl201
[   17.996065] device: 'digi_ctl202': device_add
[   18.000146] PM: Adding info for No Bus:digi_ctl202
[   18.004056] device: 'digi_ctl203': device_add
[   18.008140] PM: Adding info for No Bus:digi_ctl203
[   18.012055] device: 'digi_ctl204': device_add
[   18.016137] PM: Adding info for No Bus:digi_ctl204
[   18.020055] device: 'digi_ctl205': device_add
[   18.024137] PM: Adding info for No Bus:digi_ctl205
[   18.028065] device: 'digi_ctl206': device_add
[   18.032145] PM: Adding info for No Bus:digi_ctl206
[   18.036056] device: 'digi_ctl207': device_add
[   18.040147] PM: Adding info for No Bus:digi_ctl207
[   18.044057] device: 'digi_ctl208': device_add
[   18.048143] PM: Adding info for No Bus:digi_ctl208
[   18.052055] device: 'digi_ctl209': device_add
[   18.056139] PM: Adding info for No Bus:digi_ctl209
[   18.060066] device: 'digi_ctl210': device_add
[   18.068027] PM: Adding info for No Bus:digi_ctl210
[   18.072056] device: 'digi_ctl211': device_add
[   18.076153] PM: Adding info for No Bus:digi_ctl211
[   18.080055] device: 'digi_ctl212': device_add
[   18.084142] PM: Adding info for No Bus:digi_ctl212
[   18.088055] device: 'digi_ctl213': device_add
[   18.096075] PM: Adding info for No Bus:digi_ctl213
[   18.100057] device: 'digi_ctl214': device_add
[   18.104146] PM: Adding info for No Bus:digi_ctl214
[   18.108067] device: 'digi_ctl215': device_add
[   18.112147] PM: Adding info for No Bus:digi_ctl215
[   18.116057] device: 'digi_ctl216': device_add
[   18.124118] PM: Adding info for No Bus:digi_ctl216
[   18.128055] device: 'digi_ctl217': device_add
[   18.132139] PM: Adding info for No Bus:digi_ctl217
[   18.136055] device: 'digi_ctl218': device_add
[   18.140140] PM: Adding info for No Bus:digi_ctl218
[   18.144055] device: 'digi_ctl219': device_add
[   18.148151] PM: Adding info for No Bus:digi_ctl219
[   18.152057] device: 'digi_ctl220': device_add
[   18.156148] PM: Adding info for No Bus:digi_ctl220
[   18.160055] device: 'digi_ctl221': device_add
[   18.164141] PM: Adding info for No Bus:digi_ctl221
[   18.168055] device: 'digi_ctl222': device_add
[   18.172141] PM: Adding info for No Bus:digi_ctl222
[   18.176055] device: 'digi_ctl223': device_add
[   18.180141] PM: Adding info for No Bus:digi_ctl223
[   18.184056] device: 'digi_ctl224': device_add
[   18.188158] PM: Adding info for No Bus:digi_ctl224
[   18.192058] device: 'digi_ctl225': device_add
[   18.196155] PM: Adding info for No Bus:digi_ctl225
[   18.200058] device: 'digi_ctl226': device_add
[   18.204149] PM: Adding info for No Bus:digi_ctl226
[   18.208055] device: 'digi_ctl227': device_add
[   18.212143] PM: Adding info for No Bus:digi_ctl227
[   18.216064] device: 'digi_ctl228': device_add
[   18.220153] PM: Adding info for No Bus:digi_ctl228
[   18.224057] device: 'digi_ctl229': device_add
[   18.228144] PM: Adding info for No Bus:digi_ctl229
[   18.232055] device: 'digi_ctl230': device_add
[   18.236143] PM: Adding info for No Bus:digi_ctl230
[   18.240056] device: 'digi_ctl231': device_add
[   18.244170] PM: Adding info for No Bus:digi_ctl231
[   18.248057] device: 'digi_ctl232': device_add
[   18.252153] PM: Adding info for No Bus:digi_ctl232
[   18.256055] device: 'digi_ctl233': device_add
[   18.260147] PM: Adding info for No Bus:digi_ctl233
[   18.264067] device: 'digi_ctl234': device_add
[   18.268156] PM: Adding info for No Bus:digi_ctl234
[   18.272057] device: 'digi_ctl235': device_add
[   18.276146] PM: Adding info for No Bus:digi_ctl235
[   18.280055] device: 'digi_ctl236': device_add
[   18.284147] PM: Adding info for No Bus:digi_ctl236
[   18.288056] device: 'digi_ctl237': device_add
[   18.292156] PM: Adding info for No Bus:digi_ctl237
[   18.296057] device: 'digi_ctl238': device_add
[   18.300152] PM: Adding info for No Bus:digi_ctl238
[   18.304056] device: 'digi_ctl239': device_add
[   18.308146] PM: Adding info for No Bus:digi_ctl239
[   18.316007] device: 'digi_ctl240': device_add
[   18.320146] PM: Adding info for No Bus:digi_ctl240
[   18.324064] device: 'digi_ctl241': device_add
[   18.328154] PM: Adding info for No Bus:digi_ctl241
[   18.332056] device: 'digi_ctl242': device_add
[   18.336147] PM: Adding info for No Bus:digi_ctl242
[   18.344035] device: 'digi_ctl243': device_add
[   18.348155] PM: Adding info for No Bus:digi_ctl243
[   18.352057] device: 'digi_ctl244': device_add
[   18.356154] PM: Adding info for No Bus:digi_ctl244
[   18.360056] device: 'digi_ctl245': device_add
[   18.364148] PM: Adding info for No Bus:digi_ctl245
[   18.368055] device: 'digi_ctl246': device_add
[   18.372148] PM: Adding info for No Bus:digi_ctl246
[   18.376055] device: 'digi_ctl247': device_add
[   18.380148] PM: Adding info for No Bus:digi_ctl247
[   18.384055] device: 'digi_ctl248': device_add
[   18.388148] PM: Adding info for No Bus:digi_ctl248
[   18.392056] device: 'digi_ctl249': device_add
[   18.396158] PM: Adding info for No Bus:digi_ctl249
[   18.400058] device: 'digi_ctl250': device_add
[   18.404156] PM: Adding info for No Bus:digi_ctl250
[   18.408056] device: 'digi_ctl251': device_add
[   18.412151] PM: Adding info for No Bus:digi_ctl251
[   18.416056] device: 'digi_ctl252': device_add
[   18.420162] PM: Adding info for No Bus:digi_ctl252
[   18.424057] device: 'digi_ctl253': device_add
[   18.428160] PM: Adding info for No Bus:digi_ctl253
[   18.432065] device: 'digi_ctl254': device_add
[   18.436159] PM: Adding info for No Bus:digi_ctl254
[   18.440057] device: 'digi_ctl255': device_add
[   18.444160] PM: Adding info for No Bus:digi_ctl255
[   18.448062] initcall epca_module_init+0x0/0x39e returned 0 after 4082031 usecs
[   18.452004] calling  specialix_init_module+0x0/0x386 @ 1
[   18.456002] sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998.
[   18.460001] sx: derived from work (c) D.Gorodchanin 1994-1996.
[   18.464001] sx: DTR/RTS pin is always RTS.
[   18.468015] device: 'ttyW0': device_add
[   18.472162] PM: Adding info for No Bus:ttyW0
[   18.476056] device: 'ttyW1': device_add
[   18.480145] PM: Adding info for No Bus:ttyW1
[   18.484055] device: 'ttyW2': device_add
[   18.488167] PM: Adding info for No Bus:ttyW2
[   18.492057] device: 'ttyW3': device_add
[   18.496145] PM: Adding info for No Bus:ttyW3
[   18.500056] device: 'ttyW4': device_add
[   18.504144] PM: Adding info for No Bus:ttyW4
[   18.508065] device: 'ttyW5': device_add
[   18.512150] PM: Adding info for No Bus:ttyW5
[   18.516057] device: 'ttyW6': device_add
[   18.520156] PM: Adding info for No Bus:ttyW6
[   18.524056] device: 'ttyW7': device_add
[   18.528148] PM: Adding info for No Bus:ttyW7
[   18.532055] device: 'ttyW8': device_add
[   18.536147] PM: Adding info for No Bus:ttyW8
[   18.540055] device: 'ttyW9': device_add
[   18.544145] PM: Adding info for No Bus:ttyW9
[   18.548055] device: 'ttyW10': device_add
[   18.552146] PM: Adding info for No Bus:ttyW10
[   18.556064] device: 'ttyW11': device_add
[   18.560166] PM: Adding info for No Bus:ttyW11
[   18.564057] device: 'ttyW12': device_add
[   18.568156] PM: Adding info for No Bus:ttyW12
[   18.572056] device: 'ttyW13': device_add
[   18.576147] PM: Adding info for No Bus:ttyW13
[   18.580055] device: 'ttyW14': device_add
[   18.584147] PM: Adding info for No Bus:ttyW14
[   18.588056] device: 'ttyW15': device_add
[   18.592147] PM: Adding info for No Bus:ttyW15
[   18.596055] device: 'ttyW16': device_add
[   18.600148] PM: Adding info for No Bus:ttyW16
[   18.604055] device: 'ttyW17': device_add
[   18.608159] PM: Adding info for No Bus:ttyW17
[   18.612058] device: 'ttyW18': device_add
[   18.616157] PM: Adding info for No Bus:ttyW18
[   18.620055] device: 'ttyW19': device_add
[   18.624151] PM: Adding info for No Bus:ttyW19
[   18.628055] device: 'ttyW20': device_add
[   18.632167] PM: Adding info for No Bus:ttyW20
[   18.636057] device: 'ttyW21': device_add
[   18.640154] PM: Adding info for No Bus:ttyW21
[   18.644055] device: 'ttyW22': device_add
[   18.648153] PM: Adding info for No Bus:ttyW22
[   18.652056] device: 'ttyW23': device_add
[   18.656161] PM: Adding info for No Bus:ttyW23
[   18.660064] device: 'ttyW24': device_add
[   18.664163] PM: Adding info for No Bus:ttyW24
[   18.668056] device: 'ttyW25': device_add
[   18.672154] PM: Adding info for No Bus:ttyW25
[   18.676055] device: 'ttyW26': device_add
[   18.680154] PM: Adding info for No Bus:ttyW26
[   18.684055] device: 'ttyW27': device_add
[   18.688156] PM: Adding info for No Bus:ttyW27
[   18.692055] device: 'ttyW28': device_add
[   18.696154] PM: Adding info for No Bus:ttyW28
[   18.700055] device: 'ttyW29': device_add
[   18.704166] PM: Adding info for No Bus:ttyW29
[   18.708057] device: 'ttyW30': device_add
[   18.712161] PM: Adding info for No Bus:ttyW30
[   18.720019] device: 'ttyW31': device_add
[   18.724094] PM: Adding info for No Bus:ttyW31
[   18.728056] device: 'ttyW32': device_add
[   18.732157] PM: Adding info for No Bus:ttyW32
[   18.736066] device: 'ttyW33': device_add
[   18.740165] PM: Adding info for No Bus:ttyW33
[   18.744057] device: 'ttyW34': device_add
[   18.748157] PM: Adding info for No Bus:ttyW34
[   18.752056] device: 'ttyW35': device_add
[   18.756167] PM: Adding info for No Bus:ttyW35
[   18.760057] device: 'ttyW36': device_add
[   18.764165] PM: Adding info for No Bus:ttyW36
[   18.768066] device: 'ttyW37': device_add
[   18.772167] PM: Adding info for No Bus:ttyW37
[   18.776059] device: 'ttyW38': device_add
[   18.780173] PM: Adding info for No Bus:ttyW38
[   18.788034] device: 'ttyW39': device_add
[   18.792124] PM: Adding info for No Bus:ttyW39
[   18.796056] device: 'ttyW40': device_add
[   18.800159] PM: Adding info for No Bus:ttyW40
[   18.804056] device: 'ttyW41': device_add
[   18.808171] PM: Adding info for No Bus:ttyW41
[   18.812057] device: 'ttyW42': device_add
[   18.816192] PM: Adding info for No Bus:ttyW42
[   18.820057] device: 'ttyW43': device_add
[   18.824164] PM: Adding info for No Bus:ttyW43
[   18.828056] device: 'ttyW44': device_add
[   18.832161] PM: Adding info for No Bus:ttyW44
[   18.836056] device: 'ttyW45': device_add
[   18.840161] PM: Adding info for No Bus:ttyW45
[   18.844056] device: 'ttyW46': device_add
[   18.848165] PM: Adding info for No Bus:ttyW46
[   18.856036] device: 'ttyW47': device_add
[   18.860147] PM: Adding info for No Bus:ttyW47
[   18.864057] device: 'ttyW48': device_add
[   18.868172] PM: Adding info for No Bus:ttyW48
[   18.872056] device: 'ttyW49': device_add
[   18.876165] PM: Adding info for No Bus:ttyW49
[   18.880068] device: 'ttyW50': device_add
[   18.884174] PM: Adding info for No Bus:ttyW50
[   18.888059] device: 'ttyW51': device_add
[   18.892166] PM: Adding info for No Bus:ttyW51
[   18.896056] device: 'ttyW52': device_add
[   18.900165] PM: Adding info for No Bus:ttyW52
[   18.904056] device: 'ttyW53': device_add
[   18.908176] PM: Adding info for No Bus:ttyW53
[   18.912058] device: 'ttyW54': device_add
[   18.916185] PM: Adding info for No Bus:ttyW54
[   18.920057] device: 'ttyW55': device_add
[   18.924174] PM: Adding info for No Bus:ttyW55
[   18.928057] device: 'ttyW56': device_add
[   18.932169] PM: Adding info for No Bus:ttyW56
[   18.936068] device: 'ttyW57': device_add
[   18.940176] PM: Adding info for No Bus:ttyW57
[   18.944057] device: 'ttyW58': device_add
[   18.948167] PM: Adding info for No Bus:ttyW58
[   18.952056] device: 'ttyW59': device_add
[   18.956179] PM: Adding info for No Bus:ttyW59
[   18.960058] device: 'ttyW60': device_add
[   18.964178] PM: Adding info for No Bus:ttyW60
[   18.968066] device: 'ttyW61': device_add
[   18.972180] PM: Adding info for No Bus:ttyW61
[   18.976057] device: 'ttyW62': device_add
[   18.980169] PM: Adding info for No Bus:ttyW62
[   18.984065] device: 'ttyW63': device_add
[   18.988177] PM: Adding info for No Bus:ttyW63
[   18.992079] sx0: specialix IO8+ Board at 0x100 not found.
[   18.996012] sx1: specialix IO8+ Board at 0x180 not found.
[   19.000011] sx2: specialix IO8+ Board at 0x250 not found.
[   19.004011] sx3: specialix IO8+ Board at 0x260 not found.
[   19.008234] device: 'ttyW0': device_unregister
[   19.012002] PM: Removing info for No Bus:ttyW0
[   19.016190] device: 'ttyW0': device_create_release
[   19.020165] device: 'ttyW1': device_unregister
[   19.024002] PM: Removing info for No Bus:ttyW1
[   19.028174] device: 'ttyW1': device_create_release
[   19.032161] device: 'ttyW2': device_unregister
[   19.036002] PM: Removing info for No Bus:ttyW2
[   19.040175] device: 'ttyW2': device_create_release
[   19.044158] device: 'ttyW3': device_unregister
[   19.048003] PM: Removing info for No Bus:ttyW3
[   19.052175] device: 'ttyW3': device_create_release
[   19.056158] device: 'ttyW4': device_unregister
[   19.060002] PM: Removing info for No Bus:ttyW4
[   19.064177] device: 'ttyW4': device_create_release
[   19.068158] device: 'ttyW5': device_unregister
[   19.072002] PM: Removing info for No Bus:ttyW5
[   19.076176] device: 'ttyW5': device_create_release
[   19.080159] device: 'ttyW6': device_unregister
[   19.084002] PM: Removing info for No Bus:ttyW6
[   19.088174] device: 'ttyW6': device_create_release
[   19.092158] device: 'ttyW7': device_unregister
[   19.096002] PM: Removing info for No Bus:ttyW7
[   19.100173] device: 'ttyW7': device_create_release
[   19.104158] device: 'ttyW8': device_unregister
[   19.108002] PM: Removing info for No Bus:ttyW8
[   19.112177] device: 'ttyW8': device_create_release
[   19.116159] device: 'ttyW9': device_unregister
[   19.120002] PM: Removing info for No Bus:ttyW9
[   19.124182] device: 'ttyW9': device_create_release
[   19.128160] device: 'ttyW10': device_unregister
[   19.132002] PM: Removing info for No Bus:ttyW10
[   19.140021] device: 'ttyW10': device_create_release
[   19.144160] device: 'ttyW11': device_unregister
[   19.148002] PM: Removing info for No Bus:ttyW11
[   19.152196] device: 'ttyW11': device_create_release
[   19.156164] device: 'ttyW12': device_unregister
[   19.160002] PM: Removing info for No Bus:ttyW12
[   19.164180] device: 'ttyW12': device_create_release
[   19.168161] device: 'ttyW13': device_unregister
[   19.172002] PM: Removing info for No Bus:ttyW13
[   19.176179] device: 'ttyW13': device_create_release
[   19.180160] device: 'ttyW14': device_unregister
[   19.184002] PM: Removing info for No Bus:ttyW14
[   19.188182] device: 'ttyW14': device_create_release
[   19.192161] device: 'ttyW15': device_unregister
[   19.196002] PM: Removing info for No Bus:ttyW15
[   19.200185] device: 'ttyW15': device_create_release
[   19.204161] device: 'ttyW16': device_unregister
[   19.208003] PM: Removing info for No Bus:ttyW16
[   19.212189] device: 'ttyW16': device_create_release
[   19.216161] device: 'ttyW17': device_unregister
[   19.220002] PM: Removing info for No Bus:ttyW17
[   19.224199] device: 'ttyW17': device_create_release
[   19.228165] device: 'ttyW18': device_unregister
[   19.232002] PM: Removing info for No Bus:ttyW18
[   19.236184] device: 'ttyW18': device_create_release
[   19.240163] device: 'ttyW19': device_unregister
[   19.244002] PM: Removing info for No Bus:ttyW19
[   19.248185] device: 'ttyW19': device_create_release
[   19.252163] device: 'ttyW20': device_unregister
[   19.256002] PM: Removing info for No Bus:ttyW20
[   19.260179] device: 'ttyW20': device_create_release
[   19.264179] device: 'ttyW21': device_unregister
[   19.268002] PM: Removing info for No Bus:ttyW21
[   19.272182] device: 'ttyW21': device_create_release
[   19.276160] device: 'ttyW22': device_unregister
[   19.280002] PM: Removing info for No Bus:ttyW22
[   19.284181] device: 'ttyW22': device_create_release
[   19.288163] device: 'ttyW23': device_unregister
[   19.292002] PM: Removing info for No Bus:ttyW23
[   19.296193] device: 'ttyW23': device_create_release
[   19.300175] device: 'ttyW24': device_unregister
[   19.304002] PM: Removing info for No Bus:ttyW24
[   19.308178] device: 'ttyW24': device_create_release
[   19.312160] device: 'ttyW25': device_unregister
[   19.316002] PM: Removing info for No Bus:ttyW25
[   19.320174] device: 'ttyW25': device_create_release
[   19.324159] device: 'ttyW26': device_unregister
[   19.328003] PM: Removing info for No Bus:ttyW26
[   19.332177] device: 'ttyW26': device_create_release
[   19.336159] device: 'ttyW27': device_unregister
[   19.340002] PM: Removing info for No Bus:ttyW27
[   19.344180] device: 'ttyW27': device_create_release
[   19.348159] device: 'ttyW28': device_unregister
[   19.352002] PM: Removing info for No Bus:ttyW28
[   19.356183] device: 'ttyW28': device_create_release
[   19.360160] device: 'ttyW29': device_unregister
[   19.364002] PM: Removing info for No Bus:ttyW29
[   19.368196] device: 'ttyW29': device_create_release
[   19.372162] device: 'ttyW30': device_unregister
[   19.376002] PM: Removing info for No Bus:ttyW30
[   19.380180] device: 'ttyW30': device_create_release
[   19.384160] device: 'ttyW31': device_unregister
[   19.388002] PM: Removing info for No Bus:ttyW31
[   19.392179] device: 'ttyW31': device_create_release
[   19.396160] device: 'ttyW32': device_unregister
[   19.400002] PM: Removing info for No Bus:ttyW32
[   19.404181] device: 'ttyW32': device_create_release
[   19.408176] device: 'ttyW33': device_unregister
[   19.412002] PM: Removing info for No Bus:ttyW33
[   19.416188] device: 'ttyW33': device_create_release
[   19.420161] device: 'ttyW34': device_unregister
[   19.424002] PM: Removing info for No Bus:ttyW34
[   19.428187] device: 'ttyW34': device_create_release
[   19.432161] device: 'ttyW35': device_unregister
[   19.436002] PM: Removing info for No Bus:ttyW35
[   19.440197] device: 'ttyW35': device_create_release
[   19.444164] device: 'ttyW36': device_unregister
[   19.448003] PM: Removing info for No Bus:ttyW36
[   19.452182] device: 'ttyW36': device_create_release
[   19.456173] device: 'ttyW37': device_unregister
[   19.460002] PM: Removing info for No Bus:ttyW37
[   19.464185] device: 'ttyW37': device_create_release
[   19.468161] device: 'ttyW38': device_unregister
[   19.472002] PM: Removing info for No Bus:ttyW38
[   19.476182] device: 'ttyW38': device_create_release
[   19.480176] device: 'ttyW39': device_unregister
[   19.484002] PM: Removing info for No Bus:ttyW39
[   19.488184] device: 'ttyW39': device_create_release
[   19.492159] device: 'ttyW40': device_unregister
[   19.496002] PM: Removing info for No Bus:ttyW40
[   19.500180] device: 'ttyW40': device_create_release
[   19.504159] device: 'ttyW41': device_unregister
[   19.508002] PM: Removing info for No Bus:ttyW41
[   19.512190] device: 'ttyW41': device_create_release
[   19.516163] device: 'ttyW42': device_unregister
[   19.520002] PM: Removing info for No Bus:ttyW42
[   19.524176] device: 'ttyW42': device_create_release
[   19.528160] device: 'ttyW43': device_unregister
[   19.532002] PM: Removing info for No Bus:ttyW43
[   19.536176] device: 'ttyW43': device_create_release
[   19.540160] device: 'ttyW44': device_unregister
[   19.544003] PM: Removing info for No Bus:ttyW44
[   19.548180] device: 'ttyW44': device_create_release
[   19.552160] device: 'ttyW45': device_unregister
[   19.556002] PM: Removing info for No Bus:ttyW45
[   19.560182] device: 'ttyW45': device_create_release
[   19.564160] device: 'ttyW46': device_unregister
[   19.568003] PM: Removing info for No Bus:ttyW46
[   19.572187] device: 'ttyW46': device_create_release
[   19.576160] device: 'ttyW47': device_unregister
[   19.580002] PM: Removing info for No Bus:ttyW47
[   19.584196] device: 'ttyW47': device_create_release
[   19.588163] device: 'ttyW48': device_unregister
[   19.592002] PM: Removing info for No Bus:ttyW48
[   19.596181] device: 'ttyW48': device_create_release
[   19.600161] device: 'ttyW49': device_unregister
[   19.604002] PM: Removing info for No Bus:ttyW49
[   19.608182] device: 'ttyW49': device_create_release
[   19.612173] device: 'ttyW50': device_unregister
[   19.616002] PM: Removing info for No Bus:ttyW50
[   19.620186] device: 'ttyW50': device_create_release
[   19.624161] device: 'ttyW51': device_unregister
[   19.628002] PM: Removing info for No Bus:ttyW51
[   19.632185] device: 'ttyW51': device_create_release
[   19.636161] device: 'ttyW52': device_unregister
[   19.640002] PM: Removing info for No Bus:ttyW52
[   19.644187] device: 'ttyW52': device_create_release
[   19.648162] device: 'ttyW53': device_unregister
[   19.652002] PM: Removing info for No Bus:ttyW53
[   19.656199] device: 'ttyW53': device_create_release
[   19.660164] device: 'ttyW54': device_unregister
[   19.664002] PM: Removing info for No Bus:ttyW54
[   19.668185] device: 'ttyW54': device_create_release
[   19.672162] device: 'ttyW55': device_unregister
[   19.676002] PM: Removing info for No Bus:ttyW55
[   19.680185] device: 'ttyW55': device_create_release
[   19.684162] device: 'ttyW56': device_unregister
[   19.688003] PM: Removing info for No Bus:ttyW56
[   19.692187] device: 'ttyW56': device_create_release
[   19.696178] device: 'ttyW57': device_unregister
[   19.700002] PM: Removing info for No Bus:ttyW57
[   19.704191] device: 'ttyW57': device_create_release
[   19.708162] device: 'ttyW58': device_unregister
[   19.712002] PM: Removing info for No Bus:ttyW58
[   19.716188] device: 'ttyW58': device_create_release
[   19.720163] device: 'ttyW59': device_unregister
[   19.724002] PM: Removing info for No Bus:ttyW59
[   19.728203] device: 'ttyW59': device_create_release
[   19.732165] device: 'ttyW60': device_unregister
[   19.736002] PM: Removing info for No Bus:ttyW60
[   19.740189] device: 'ttyW60': device_create_release
[   19.744176] device: 'ttyW61': device_unregister
[   19.748002] PM: Removing info for No Bus:ttyW61
[   19.752192] device: 'ttyW61': device_create_release
[   19.756165] device: 'ttyW62': device_unregister
[   19.760002] PM: Removing info for No Bus:ttyW62
[   19.764191] device: 'ttyW62': device_create_release
[   19.768178] device: 'ttyW63': device_unregister
[   19.772002] PM: Removing info for No Bus:ttyW63
[   19.776198] device: 'ttyW63': device_create_release
[   19.780018] sx: No specialix IO8+ boards detected.
[   19.784008] initcall specialix_init_module+0x0/0x386 returned -5 after 1296875 usecs
[   19.788004] initcall specialix_init_module+0x0/0x386 returned with error code -5 
[   19.792004] calling  ip2_loadmain+0x0/0x11c0 @ 1
[   19.796002] Computone IntelliPort Plus multiport driver version 1.2.14
[   19.800031] device class 'ip2': registering
[   19.804073] initcall ip2_loadmain+0x0/0x11c0 returned 0 after 7812 usecs
[   19.808005] calling  riscom8_init_module+0x0/0x3be @ 1
[   19.812002] rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996.
[   19.816026] device: 'ttyL0': device_add
[   19.820207] PM: Adding info for No Bus:ttyL0
[   19.824058] device: 'ttyL1': device_add
[   19.828153] PM: Adding info for No Bus:ttyL1
[   19.832056] device: 'ttyL2': device_add
[   19.836147] PM: Adding info for No Bus:ttyL2
[   19.840055] device: 'ttyL3': device_add
[   19.844144] PM: Adding info for No Bus:ttyL3
[   19.848057] device: 'ttyL4': device_add
[   19.852146] PM: Adding info for No Bus:ttyL4
[   19.856055] device: 'ttyL5': device_add
[   19.860146] PM: Adding info for No Bus:ttyL5
[   19.864056] device: 'ttyL6': device_add
[   19.868146] PM: Adding info for No Bus:ttyL6
[   19.872056] device: 'ttyL7': device_add
[   19.876147] PM: Adding info for No Bus:ttyL7
[   19.880056] device: 'ttyL8': device_add
[   19.884146] PM: Adding info for No Bus:ttyL8
[   19.888057] device: 'ttyL9': device_add
[   19.892147] PM: Adding info for No Bus:ttyL9
[   19.896056] device: 'ttyL10': device_add
[   19.900147] PM: Adding info for No Bus:ttyL10
[   19.904056] device: 'ttyL11': device_add
[   19.908164] PM: Adding info for No Bus:ttyL11
[   19.912058] device: 'ttyL12': device_add
[   19.916153] PM: Adding info for No Bus:ttyL12
[   19.920056] device: 'ttyL13': device_add
[   19.924148] PM: Adding info for No Bus:ttyL13
[   19.928057] device: 'ttyL14': device_add
[   19.932148] PM: Adding info for No Bus:ttyL14
[   19.936056] device: 'ttyL15': device_add
[   19.940147] PM: Adding info for No Bus:ttyL15
[   19.944056] device: 'ttyL16': device_add
[   19.948149] PM: Adding info for No Bus:ttyL16
[   19.952056] device: 'ttyL17': device_add
[   19.956163] PM: Adding info for No Bus:ttyL17
[   19.960057] device: 'ttyL18': device_add
[   19.964151] PM: Adding info for No Bus:ttyL18
[   19.968057] device: 'ttyL19': device_add
[   19.972160] PM: Adding info for No Bus:ttyL19
[   19.976058] device: 'ttyL20': device_add
[   19.980155] PM: Adding info for No Bus:ttyL20
[   19.984056] device: 'ttyL21': device_add
[   19.988147] PM: Adding info for No Bus:ttyL21
[   19.992064] device: 'ttyL22': device_add
[   19.996156] PM: Adding info for No Bus:ttyL22
[   20.000057] device: 'ttyL23': device_add
[   20.004166] PM: Adding info for No Bus:ttyL23
[   20.008059] device: 'ttyL24': device_add
[   20.012155] PM: Adding info for No Bus:ttyL24
[   20.016056] device: 'ttyL25': device_add
[   20.020151] PM: Adding info for No Bus:ttyL25
[   20.024056] device: 'ttyL26': device_add
[   20.028151] PM: Adding info for No Bus:ttyL26
[   20.032056] device: 'ttyL27': device_add
[   20.036150] PM: Adding info for No Bus:ttyL27
[   20.040056] device: 'ttyL28': device_add
[   20.044150] PM: Adding info for No Bus:ttyL28
[   20.048057] device: 'ttyL29': device_add
[   20.052166] PM: Adding info for No Bus:ttyL29
[   20.056061] device: 'ttyL30': device_add
[   20.060158] PM: Adding info for No Bus:ttyL30
[   20.064065] device: 'ttyL31': device_add
[   20.068156] PM: Adding info for No Bus:ttyL31
[   20.072075] rc0: RISCom/8 Board at 0x220 not found.
[   20.076030] rc1: RISCom/8 Board at 0x240 not found.
[   20.080029] rc2: RISCom/8 Board at 0x250 not found.
[   20.084029] rc3: RISCom/8 Board at 0x260 not found.
[   20.088222] device: 'ttyL0': device_unregister
[   20.092002] PM: Removing info for No Bus:ttyL0
[   20.096176] device: 'ttyL0': device_create_release
[   20.104049] device: 'ttyL1': device_unregister
[   20.108002] PM: Removing info for No Bus:ttyL1
[   20.112176] device: 'ttyL1': device_create_release
[   20.116158] device: 'ttyL2': device_unregister
[   20.120002] PM: Removing info for No Bus:ttyL2
[   20.124179] device: 'ttyL2': device_create_release
[   20.132073] device: 'ttyL3': device_unregister
[   20.136002] PM: Removing info for No Bus:ttyL3
[   20.140181] device: 'ttyL3': device_create_release
[   20.144158] device: 'ttyL4': device_unregister
[   20.148002] PM: Removing info for No Bus:ttyL4
[   20.152183] device: 'ttyL4': device_create_release
[   20.160108] device: 'ttyL5': device_unregister
[   20.164002] PM: Removing info for No Bus:ttyL5
[   20.168186] device: 'ttyL5': device_create_release
[   20.172159] device: 'ttyL6': device_unregister
[   20.176002] PM: Removing info for No Bus:ttyL6
[   20.180177] device: 'ttyL6': device_create_release
[   20.188143] device: 'ttyL7': device_unregister
[   20.192002] PM: Removing info for No Bus:ttyL7
[   20.196179] device: 'ttyL7': device_create_release
[   20.200160] device: 'ttyL8': device_unregister
[   20.204002] PM: Removing info for No Bus:ttyL8
[   20.208183] device: 'ttyL8': device_create_release
[   20.212160] device: 'ttyL9': device_unregister
[   20.216002] PM: Removing info for No Bus:ttyL9
[   20.220184] device: 'ttyL9': device_create_release
[   20.224161] device: 'ttyL10': device_unregister
[   20.228002] PM: Removing info for No Bus:ttyL10
[   20.232187] device: 'ttyL10': device_create_release
[   20.236161] device: 'ttyL11': device_unregister
[   20.240002] PM: Removing info for No Bus:ttyL11
[   20.244183] device: 'ttyL11': device_create_release
[   20.248163] device: 'ttyL12': device_unregister
[   20.252002] PM: Removing info for No Bus:ttyL12
[   20.260007] device: 'ttyL12': device_create_release
[   20.264161] device: 'ttyL13': device_unregister
[   20.268002] PM: Removing info for No Bus:ttyL13
[   20.272183] device: 'ttyL13': device_create_release
[   20.276162] device: 'ttyL14': device_unregister
[   20.280002] PM: Removing info for No Bus:ttyL14
[   20.284186] device: 'ttyL14': device_create_release
[   20.288163] device: 'ttyL15': device_unregister
[   20.292002] PM: Removing info for No Bus:ttyL15
[   20.296189] device: 'ttyL15': device_create_release
[   20.300162] device: 'ttyL16': device_unregister
[   20.304002] PM: Removing info for No Bus:ttyL16
[   20.308191] device: 'ttyL16': device_create_release
[   20.312165] device: 'ttyL17': device_unregister
[   20.316002] PM: Removing info for No Bus:ttyL17
[   20.320197] device: 'ttyL17': device_create_release
[   20.324167] device: 'ttyL18': device_unregister
[   20.328003] PM: Removing info for No Bus:ttyL18
[   20.332180] device: 'ttyL18': device_create_release
[   20.336160] device: 'ttyL19': device_unregister
[   20.340002] PM: Removing info for No Bus:ttyL19
[   20.348002] device: 'ttyL19': device_create_release
[   20.352158] device: 'ttyL20': device_unregister
[   20.356002] PM: Removing info for No Bus:ttyL20
[   20.360181] device: 'ttyL20': device_create_release
[   20.364159] device: 'ttyL21': device_unregister
[   20.368003] PM: Removing info for No Bus:ttyL21
[   20.372185] device: 'ttyL21': device_create_release
[   20.376161] device: 'ttyL22': device_unregister
[   20.380002] PM: Removing info for No Bus:ttyL22
[   20.384186] device: 'ttyL22': device_create_release
[   20.388161] device: 'ttyL23': device_unregister
[   20.392002] PM: Removing info for No Bus:ttyL23
[   20.396197] device: 'ttyL23': device_create_release
[   20.400163] device: 'ttyL24': device_unregister
[   20.404002] PM: Removing info for No Bus:ttyL24
[   20.408185] device: 'ttyL24': device_create_release
[   20.412161] device: 'ttyL25': device_unregister
[   20.416002] PM: Removing info for No Bus:ttyL25
[   20.420183] device: 'ttyL25': device_create_release
[   20.424160] device: 'ttyL26': device_unregister
[   20.428002] PM: Removing info for No Bus:ttyL26
[   20.432187] device: 'ttyL26': device_create_release
[   20.436160] device: 'ttyL27': device_unregister
[   20.440002] PM: Removing info for No Bus:ttyL27
[   20.444188] device: 'ttyL27': device_create_release
[   20.448161] device: 'ttyL28': device_unregister
[   20.452002] PM: Removing info for No Bus:ttyL28
[   20.456190] device: 'ttyL28': device_create_release
[   20.460160] device: 'ttyL29': device_unregister
[   20.464002] PM: Removing info for No Bus:ttyL29
[   20.468204] device: 'ttyL29': device_create_release
[   20.472163] device: 'ttyL30': device_unregister
[   20.476002] PM: Removing info for No Bus:ttyL30
[   20.480193] device: 'ttyL30': device_create_release
[   20.484161] device: 'ttyL31': device_unregister
[   20.488003] PM: Removing info for No Bus:ttyL31
[   20.492195] device: 'ttyL31': device_create_release
[   20.496018] rc: No RISCom/8 boards detected.
[   20.500008] initcall riscom8_init_module+0x0/0x3be returned -5 after 671875 usecs
[   20.504004] initcall riscom8_init_module+0x0/0x3be returned with error code -5 
[   20.508003] calling  isicom_init+0x0/0x1b2 @ 1
[   20.512025] bus: 'pci': add driver isicom
[   20.516074] initcall isicom_init+0x0/0x1b2 returned 0 after 3906 usecs
[   20.520005] calling  synclink_init+0x0/0x20c @ 1
[   20.524002] SyncLink serial driver $Revision: 4.38 $
[   20.528004] bus: 'pci': add driver synclink
[   20.532074] device: 'ttySL0': device_add
[   20.536198] PM: Adding info for No Bus:ttySL0
[   20.540057] device: 'ttySL1': device_add
[   20.544153] PM: Adding info for No Bus:ttySL1
[   20.548055] device: 'ttySL2': device_add
[   20.552147] PM: Adding info for No Bus:ttySL2
[   20.556056] device: 'ttySL3': device_add
[   20.560150] PM: Adding info for No Bus:ttySL3
[   20.564055] device: 'ttySL4': device_add
[   20.568156] PM: Adding info for No Bus:ttySL4
[   20.572056] device: 'ttySL5': device_add
[   20.576149] PM: Adding info for No Bus:ttySL5
[   20.580057] device: 'ttySL6': device_add
[   20.584149] PM: Adding info for No Bus:ttySL6
[   20.588056] device: 'ttySL7': device_add
[   20.592150] PM: Adding info for No Bus:ttySL7
[   20.596056] device: 'ttySL8': device_add
[   20.600148] PM: Adding info for No Bus:ttySL8
[   20.604057] device: 'ttySL9': device_add
[   20.608150] PM: Adding info for No Bus:ttySL9
[   20.612056] device: 'ttySL10': device_add
[   20.616152] PM: Adding info for No Bus:ttySL10
[   20.620056] device: 'ttySL11': device_add
[   20.624150] PM: Adding info for No Bus:ttySL11
[   20.628057] device: 'ttySL12': device_add
[   20.632151] PM: Adding info for No Bus:ttySL12
[   20.636056] device: 'ttySL13': device_add
[   20.640152] PM: Adding info for No Bus:ttySL13
[   20.644056] device: 'ttySL14': device_add
[   20.648151] PM: Adding info for No Bus:ttySL14
[   20.652056] device: 'ttySL15': device_add
[   20.656163] PM: Adding info for No Bus:ttySL15
[   20.660058] device: 'ttySL16': device_add
[   20.664161] PM: Adding info for No Bus:ttySL16
[   20.668056] device: 'ttySL17': device_add
[   20.672150] PM: Adding info for No Bus:ttySL17
[   20.676057] device: 'ttySL18': device_add
[   20.680153] PM: Adding info for No Bus:ttySL18
[   20.684056] device: 'ttySL19': device_add
[   20.688154] PM: Adding info for No Bus:ttySL19
[   20.692056] device: 'ttySL20': device_add
[   20.696151] PM: Adding info for No Bus:ttySL20
[   20.700057] device: 'ttySL21': device_add
[   20.704163] PM: Adding info for No Bus:ttySL21
[   20.708058] device: 'ttySL22': device_add
[   20.712162] PM: Adding info for No Bus:ttySL22
[   20.716056] device: 'ttySL23': device_add
[   20.720154] PM: Adding info for No Bus:ttySL23
[   20.724057] device: 'ttySL24': device_add
[   20.728156] PM: Adding info for No Bus:ttySL24
[   20.732056] device: 'ttySL25': device_add
[   20.736156] PM: Adding info for No Bus:ttySL25
[   20.740056] device: 'ttySL26': device_add
[   20.744153] PM: Adding info for No Bus:ttySL26
[   20.748057] device: 'ttySL27': device_add
[   20.752165] PM: Adding info for No Bus:ttySL27
[   20.756058] device: 'ttySL28': device_add
[   20.760167] PM: Adding info for No Bus:ttySL28
[   20.764056] device: 'ttySL29': device_add
[   20.768160] PM: Adding info for No Bus:ttySL29
[   20.772057] device: 'ttySL30': device_add
[   20.776158] PM: Adding info for No Bus:ttySL30
[   20.780055] device: 'ttySL31': device_add
[   20.784159] PM: Adding info for No Bus:ttySL31
[   20.788056] device: 'ttySL32': device_add
[   20.792158] PM: Adding info for No Bus:ttySL32
[   20.796056] device: 'ttySL33': device_add
[   20.800170] PM: Adding info for No Bus:ttySL33
[   20.804058] device: 'ttySL34': device_add
[   20.808169] PM: Adding info for No Bus:ttySL34
[   20.812056] device: 'ttySL35': device_add
[   20.816187] PM: Adding info for No Bus:ttySL35
[   20.820067] device: 'ttySL36': device_add
[   20.824175] PM: Adding info for No Bus:ttySL36
[   20.828057] device: 'ttySL37': device_add
[   20.832181] PM: Adding info for No Bus:ttySL37
[   20.836058] device: 'ttySL38': device_add
[   20.844038] PM: Adding info for No Bus:ttySL38
[   20.848056] device: 'ttySL39': device_add
[   20.852172] PM: Adding info for No Bus:ttySL39
[   20.856059] device: 'ttySL40': device_add
[   20.860169] PM: Adding info for No Bus:ttySL40
[   20.864056] device: 'ttySL41': device_add
[   20.868164] PM: Adding info for No Bus:ttySL41
[   20.872056] device: 'ttySL42': device_add
[   20.876162] PM: Adding info for No Bus:ttySL42
[   20.880057] device: 'ttySL43': device_add
[   20.884163] PM: Adding info for No Bus:ttySL43
[   20.888057] device: 'ttySL44': device_add
[   20.896083] PM: Adding info for No Bus:ttySL44
[   20.900056] device: 'ttySL45': device_add
[   20.904172] PM: Adding info for No Bus:ttySL45
[   20.908058] device: 'ttySL46': device_add
[   20.912171] PM: Adding info for No Bus:ttySL46
[   20.916057] device: 'ttySL47': device_add
[   20.920164] PM: Adding info for No Bus:ttySL47
[   20.924056] device: 'ttySL48': device_add
[   20.928167] PM: Adding info for No Bus:ttySL48
[   20.932065] device: 'ttySL49': device_add
[   20.936172] PM: Adding info for No Bus:ttySL49
[   20.940059] device: 'ttySL50': device_add
[   20.948151] PM: Adding info for No Bus:ttySL50
[   20.952057] device: 'ttySL51': device_add
[   20.956175] PM: Adding info for No Bus:ttySL51
[   20.960058] device: 'ttySL52': device_add
[   20.964174] PM: Adding info for No Bus:ttySL52
[   20.968058] device: 'ttySL53': device_add
[   20.972166] PM: Adding info for No Bus:ttySL53
[   20.976057] device: 'ttySL54': device_add
[   20.980165] PM: Adding info for No Bus:ttySL54
[   20.984056] device: 'ttySL55': device_add
[   20.988181] PM: Adding info for No Bus:ttySL55
[   20.992066] device: 'ttySL56': device_add
[   20.996181] PM: Adding info for No Bus:ttySL56
[   21.000059] device: 'ttySL57': device_add
[   21.004178] PM: Adding info for No Bus:ttySL57
[   21.008059] device: 'ttySL58': device_add
[   21.012177] PM: Adding info for No Bus:ttySL58
[   21.016056] device: 'ttySL59': device_add
[   21.020168] PM: Adding info for No Bus:ttySL59
[   21.024057] device: 'ttySL60': device_add
[   21.028167] PM: Adding info for No Bus:ttySL60
[   21.032056] device: 'ttySL61': device_add
[   21.036170] PM: Adding info for No Bus:ttySL61
[   21.040065] device: 'ttySL62': device_add
[   21.044176] PM: Adding info for No Bus:ttySL62
[   21.048060] device: 'ttySL63': device_add
[   21.052181] PM: Adding info for No Bus:ttySL63
[   21.056058] device: 'ttySL64': device_add
[   21.060180] PM: Adding info for No Bus:ttySL64
[   21.064056] device: 'ttySL65': device_add
[   21.068170] PM: Adding info for No Bus:ttySL65
[   21.072057] device: 'ttySL66': device_add
[   21.076173] PM: Adding info for No Bus:ttySL66
[   21.080058] device: 'ttySL67': device_add
[   21.084174] PM: Adding info for No Bus:ttySL67
[   21.088057] device: 'ttySL68': device_add
[   21.092174] PM: Adding info for No Bus:ttySL68
[   21.096057] device: 'ttySL69': device_add
[   21.100185] PM: Adding info for No Bus:ttySL69
[   21.104058] device: 'ttySL70': device_add
[   21.108186] PM: Adding info for No Bus:ttySL70
[   21.112056] device: 'ttySL71': device_add
[   21.116173] PM: Adding info for No Bus:ttySL71
[   21.120058] device: 'ttySL72': device_add
[   21.124174] PM: Adding info for No Bus:ttySL72
[   21.128057] device: 'ttySL73': device_add
[   21.132178] PM: Adding info for No Bus:ttySL73
[   21.136068] device: 'ttySL74': device_add
[   21.140183] PM: Adding info for No Bus:ttySL74
[   21.144067] device: 'ttySL75': device_add
[   21.148196] PM: Adding info for No Bus:ttySL75
[   21.152059] device: 'ttySL76': device_add
[   21.156187] PM: Adding info for No Bus:ttySL76
[   21.160057] device: 'ttySL77': device_add
[   21.164177] PM: Adding info for No Bus:ttySL77
[   21.168059] device: 'ttySL78': device_add
[   21.172181] PM: Adding info for No Bus:ttySL78
[   21.176056] device: 'ttySL79': device_add
[   21.184060] PM: Adding info for No Bus:ttySL79
[   21.188056] device: 'ttySL80': device_add
[   21.192179] PM: Adding info for No Bus:ttySL80
[   21.196057] device: 'ttySL81': device_add
[   21.200187] PM: Adding info for No Bus:ttySL81
[   21.204060] device: 'ttySL82': device_add
[   21.208188] PM: Adding info for No Bus:ttySL82
[   21.212056] device: 'ttySL83': device_add
[   21.216182] PM: Adding info for No Bus:ttySL83
[   21.220066] device: 'ttySL84': device_add
[   21.224189] PM: Adding info for No Bus:ttySL84
[   21.232037] device: 'ttySL85': device_add
[   21.236181] PM: Adding info for No Bus:ttySL85
[   21.240058] device: 'ttySL86': device_add
[   21.244181] PM: Adding info for No Bus:ttySL86
[   21.248058] device: 'ttySL87': device_add
[   21.252194] PM: Adding info for No Bus:ttySL87
[   21.256065] device: 'ttySL88': device_add
[   21.260191] PM: Adding info for No Bus:ttySL88
[   21.264059] device: 'ttySL89': device_add
[   21.268185] PM: Adding info for No Bus:ttySL89
[   21.272056] device: 'ttySL90': device_add
[   21.276187] PM: Adding info for No Bus:ttySL90
[   21.280057] device: 'ttySL91': device_add
[   21.284183] PM: Adding info for No Bus:ttySL91
[   21.288059] device: 'ttySL92': device_add
[   21.292204] PM: Adding info for No Bus:ttySL92
[   21.296059] device: 'ttySL93': device_add
[   21.300198] PM: Adding info for No Bus:ttySL93
[   21.304058] device: 'ttySL94': device_add
[   21.308220] PM: Adding info for No Bus:ttySL94
[   21.312058] device: 'ttySL95': device_add
[   21.316198] PM: Adding info for No Bus:ttySL95
[   21.320057] device: 'ttySL96': device_add
[   21.324188] PM: Adding info for No Bus:ttySL96
[   21.328058] device: 'ttySL97': device_add
[   21.332187] PM: Adding info for No Bus:ttySL97
[   21.336059] device: 'ttySL98': device_add
[   21.340187] PM: Adding info for No Bus:ttySL98
[   21.344056] device: 'ttySL99': device_add
[   21.348197] PM: Adding info for No Bus:ttySL99
[   21.352058] device: 'ttySL100': device_add
[   21.356194] PM: Adding info for No Bus:ttySL100
[   21.360067] device: 'ttySL101': device_add
[   21.364196] PM: Adding info for No Bus:ttySL101
[   21.368059] device: 'ttySL102': device_add
[   21.372191] PM: Adding info for No Bus:ttySL102
[   21.376056] device: 'ttySL103': device_add
[   21.380188] PM: Adding info for No Bus:ttySL103
[   21.384057] device: 'ttySL104': device_add
[   21.388188] PM: Adding info for No Bus:ttySL104
[   21.392056] device: 'ttySL105': device_add
[   21.396217] PM: Adding info for No Bus:ttySL105
[   21.400059] device: 'ttySL106': device_add
[   21.408129] PM: Adding info for No Bus:ttySL106
[   21.412056] device: 'ttySL107': device_add
[   21.416190] PM: Adding info for No Bus:ttySL107
[   21.420058] device: 'ttySL108': device_add
[   21.424190] PM: Adding info for No Bus:ttySL108
[   21.428056] device: 'ttySL109': device_add
[   21.432192] PM: Adding info for No Bus:ttySL109
[   21.436057] device: 'ttySL110': device_add
[   21.440190] PM: Adding info for No Bus:ttySL110
[   21.444058] device: 'ttySL111': device_add
[   21.448202] PM: Adding info for No Bus:ttySL111
[   21.452066] device: 'ttySL112': device_add
[   21.456202] PM: Adding info for No Bus:ttySL112
[   21.460057] device: 'ttySL113': device_add
[   21.464191] PM: Adding info for No Bus:ttySL113
[   21.468066] device: 'ttySL114': device_add
[   21.472200] PM: Adding info for No Bus:ttySL114
[   21.476058] device: 'ttySL115': device_add
[   21.484038] PM: Adding info for No Bus:ttySL115
[   21.488057] device: 'ttySL116': device_add
[   21.492193] PM: Adding info for No Bus:ttySL116
[   21.496056] device: 'ttySL117': device_add
[   21.500202] PM: Adding info for No Bus:ttySL117
[   21.504060] device: 'ttySL118': device_add
[   21.508201] PM: Adding info for No Bus:ttySL118
[   21.512056] device: 'ttySL119': device_add
[   21.516195] PM: Adding info for No Bus:ttySL119
[   21.520057] device: 'ttySL120': device_add
[   21.524193] PM: Adding info for No Bus:ttySL120
[   21.528059] device: 'ttySL121': device_add
[   21.532212] PM: Adding info for No Bus:ttySL121
[   21.536058] device: 'ttySL122': device_add
[   21.540200] PM: Adding info for No Bus:ttySL122
[   21.544057] device: 'ttySL123': device_add
[   21.548205] PM: Adding info for No Bus:ttySL123
[   21.552060] device: 'ttySL124': device_add
[   21.556202] PM: Adding info for No Bus:ttySL124
[   21.560056] device: 'ttySL125': device_add
[   21.564198] PM: Adding info for No Bus:ttySL125
[   21.568058] device: 'ttySL126': device_add
[   21.572208] PM: Adding info for No Bus:ttySL126
[   21.576067] device: 'ttySL127': device_add
[   21.580208] PM: Adding info for No Bus:ttySL127
[   21.584060] SyncLink serial driver $Revision: 4.38 $, tty major#252
[   21.588008] initcall synclink_init+0x0/0x20c returned 0 after 1039062 usecs
[   21.592005] calling  synclinkmp_init+0x0/0x150 @ 1
[   21.596002] SyncLink MultiPort driver $Revision: 4.38 $
[   21.600006] bus: 'pci': add driver synclinkmp
[   21.604105] device: 'ttySLM0': device_add
[   21.608242] PM: Adding info for No Bus:ttySLM0
[   21.612062] device: 'ttySLM1': device_add
[   21.616207] PM: Adding info for No Bus:ttySLM1
[   21.620057] device: 'ttySLM2': device_add
[   21.624198] PM: Adding info for No Bus:ttySLM2
[   21.628057] device: 'ttySLM3': device_add
[   21.632193] PM: Adding info for No Bus:ttySLM3
[   21.636058] device: 'ttySLM4': device_add
[   21.640195] PM: Adding info for No Bus:ttySLM4
[   21.644057] device: 'ttySLM5': device_add
[   21.648198] PM: Adding info for No Bus:ttySLM5
[   21.652057] device: 'ttySLM6': device_add
[   21.656210] PM: Adding info for No Bus:ttySLM6
[   21.660060] device: 'ttySLM7': device_add
[   21.668179] PM: Adding info for No Bus:ttySLM7
[   21.672058] device: 'ttySLM8': device_add
[   21.676197] PM: Adding info for No Bus:ttySLM8
[   21.680057] device: 'ttySLM9': device_add
[   21.684198] PM: Adding info for No Bus:ttySLM9
[   21.688068] device: 'ttySLM10': device_add
[   21.692205] PM: Adding info for No Bus:ttySLM10
[   21.696060] device: 'ttySLM11': device_add
[   21.700198] PM: Adding info for No Bus:ttySLM11
[   21.704065] device: 'ttySLM12': device_add
[   21.712190] PM: Adding info for No Bus:ttySLM12
[   21.716059] device: 'ttySLM13': device_add
[   21.720208] PM: Adding info for No Bus:ttySLM13
[   21.724057] device: 'ttySLM14': device_add
[   21.728201] PM: Adding info for No Bus:ttySLM14
[   21.732058] device: 'ttySLM15': device_add
[   21.736200] PM: Adding info for No Bus:ttySLM15
[   21.740057] device: 'ttySLM16': device_add
[   21.744200] PM: Adding info for No Bus:ttySLM16
[   21.748056] device: 'ttySLM17': device_add
[   21.752199] PM: Adding info for No Bus:ttySLM17
[   21.756058] device: 'ttySLM18': device_add
[   21.760209] PM: Adding info for No Bus:ttySLM18
[   21.764058] device: 'ttySLM19': device_add
[   21.768224] PM: Adding info for No Bus:ttySLM19
[   21.772059] device: 'ttySLM20': device_add
[   21.776209] PM: Adding info for No Bus:ttySLM20
[   21.780058] device: 'ttySLM21': device_add
[   21.784203] PM: Adding info for No Bus:ttySLM21
[   21.788057] device: 'ttySLM22': device_add
[   21.792202] PM: Adding info for No Bus:ttySLM22
[   21.796057] device: 'ttySLM23': device_add
[   21.800201] PM: Adding info for No Bus:ttySLM23
[   21.804058] device: 'ttySLM24': device_add
[   21.808216] PM: Adding info for No Bus:ttySLM24
[   21.812066] device: 'ttySLM25': device_add
[   21.816238] PM: Adding info for No Bus:ttySLM25
[   21.820071] device: 'ttySLM26': device_add
[   21.824214] PM: Adding info for No Bus:ttySLM26
[   21.828060] device: 'ttySLM27': device_add
[   21.832204] PM: Adding info for No Bus:ttySLM27
[   21.836057] device: 'ttySLM28': device_add
[   21.840204] PM: Adding info for No Bus:ttySLM28
[   21.844057] device: 'ttySLM29': device_add
[   21.848209] PM: Adding info for No Bus:ttySLM29
[   21.852058] device: 'ttySLM30': device_add
[   21.856214] PM: Adding info for No Bus:ttySLM30
[   21.860059] device: 'ttySLM31': device_add
[   21.864216] PM: Adding info for No Bus:ttySLM31
[   21.868057] device: 'ttySLM32': device_add
[   21.872206] PM: Adding info for No Bus:ttySLM32
[   21.876058] device: 'ttySLM33': device_add
[   21.880205] PM: Adding info for No Bus:ttySLM33
[   21.884057] device: 'ttySLM34': device_add
[   21.888208] PM: Adding info for No Bus:ttySLM34
[   21.892057] device: 'ttySLM35': device_add
[   21.896204] PM: Adding info for No Bus:ttySLM35
[   21.900058] device: 'ttySLM36': device_add
[   21.904216] PM: Adding info for No Bus:ttySLM36
[   21.908059] device: 'ttySLM37': device_add
[   21.912215] PM: Adding info for No Bus:ttySLM37
[   21.916073] device: 'ttySLM38': device_add
[   21.920218] PM: Adding info for No Bus:ttySLM38
[   21.924060] device: 'ttySLM39': device_add
[   21.928209] PM: Adding info for No Bus:ttySLM39
[   21.932057] device: 'ttySLM40': device_add
[   21.936207] PM: Adding info for No Bus:ttySLM40
[   21.940057] device: 'ttySLM41': device_add
[   21.944206] PM: Adding info for No Bus:ttySLM41
[   21.948058] device: 'ttySLM42': device_add
[   21.952216] PM: Adding info for No Bus:ttySLM42
[   21.956059] device: 'ttySLM43': device_add
[   21.960216] PM: Adding info for No Bus:ttySLM43
[   21.964057] device: 'ttySLM44': device_add
[   21.968209] PM: Adding info for No Bus:ttySLM44
[   21.972059] device: 'ttySLM45': device_add
[   21.976207] PM: Adding info for No Bus:ttySLM45
[   21.980057] device: 'ttySLM46': device_add
[   21.984208] PM: Adding info for No Bus:ttySLM46
[   21.988057] device: 'ttySLM47': device_add
[   21.992228] PM: Adding info for No Bus:ttySLM47
[   22.000057] device: 'ttySLM48': device_add
[   22.004221] PM: Adding info for No Bus:ttySLM48
[   22.008062] device: 'ttySLM49': device_add
[   22.012218] PM: Adding info for No Bus:ttySLM49
[   22.016057] device: 'ttySLM50': device_add
[   22.020210] PM: Adding info for No Bus:ttySLM50
[   22.024066] device: 'ttySLM51': device_add
[   22.028218] PM: Adding info for No Bus:ttySLM51
[   22.032060] device: 'ttySLM52': device_add
[   22.036209] PM: Adding info for No Bus:ttySLM52
[   22.040057] device: 'ttySLM53': device_add
[   22.044210] PM: Adding info for No Bus:ttySLM53
[   22.048059] device: 'ttySLM54': device_add
[   22.052221] PM: Adding info for No Bus:ttySLM54
[   22.056061] device: 'ttySLM55': device_add
[   22.060220] PM: Adding info for No Bus:ttySLM55
[   22.064057] device: 'ttySLM56': device_add
[   22.068233] PM: Adding info for No Bus:ttySLM56
[   22.072059] device: 'ttySLM57': device_add
[   22.076216] PM: Adding info for No Bus:ttySLM57
[   22.080059] device: 'ttySLM58': device_add
[   22.084211] PM: Adding info for No Bus:ttySLM58
[   22.088059] device: 'ttySLM59': device_add
[   22.092213] PM: Adding info for No Bus:ttySLM59
[   22.096057] device: 'ttySLM60': device_add
[   22.100222] PM: Adding info for No Bus:ttySLM60
[   22.104063] device: 'ttySLM61': device_add
[   22.112116] PM: Adding info for No Bus:ttySLM61
[   22.116058] device: 'ttySLM62': device_add
[   22.120213] PM: Adding info for No Bus:ttySLM62
[   22.124058] device: 'ttySLM63': device_add
[   22.128216] PM: Adding info for No Bus:ttySLM63
[   22.132067] device: 'ttySLM64': device_add
[   22.136223] PM: Adding info for No Bus:ttySLM64
[   22.140060] device: 'ttySLM65': device_add
[   22.144217] PM: Adding info for No Bus:ttySLM65
[   22.148067] device: 'ttySLM66': device_add
[   22.152236] PM: Adding info for No Bus:ttySLM66
[   22.156060] device: 'ttySLM67': device_add
[   22.160227] PM: Adding info for No Bus:ttySLM67
[   22.164059] device: 'ttySLM68': device_add
[   22.168231] PM: Adding info for No Bus:ttySLM68
[   22.172059] device: 'ttySLM69': device_add
[   22.176228] PM: Adding info for No Bus:ttySLM69
[   22.184007] device: 'ttySLM70': device_add
[   22.188220] PM: Adding info for No Bus:ttySLM70
[   22.192057] device: 'ttySLM71': device_add
[   22.196217] PM: Adding info for No Bus:ttySLM71
[   22.200059] device: 'ttySLM72': device_add
[   22.204230] PM: Adding info for No Bus:ttySLM72
[   22.208061] device: 'ttySLM73': device_add
[   22.212231] PM: Adding info for No Bus:ttySLM73
[   22.216058] device: 'ttySLM74': device_add
[   22.220218] PM: Adding info for No Bus:ttySLM74
[   22.224059] device: 'ttySLM75': device_add
[   22.228219] PM: Adding info for No Bus:ttySLM75
[   22.232058] device: 'ttySLM76': device_add
[   22.236220] PM: Adding info for No Bus:ttySLM76
[   22.240067] device: 'ttySLM77': device_add
[   22.244229] PM: Adding info for No Bus:ttySLM77
[   22.248062] device: 'ttySLM78': device_add
[   22.252235] PM: Adding info for No Bus:ttySLM78
[   22.256059] device: 'ttySLM79': device_add
[   22.260233] PM: Adding info for No Bus:ttySLM79
[   22.264058] device: 'ttySLM80': device_add
[   22.268221] PM: Adding info for No Bus:ttySLM80
[   22.272059] device: 'ttySLM81': device_add
[   22.276221] PM: Adding info for No Bus:ttySLM81
[   22.280058] device: 'ttySLM82': device_add
[   22.284223] PM: Adding info for No Bus:ttySLM82
[   22.288060] device: 'ttySLM83': device_add
[   22.296138] PM: Adding info for No Bus:ttySLM83
[   22.300058] device: 'ttySLM84': device_add
[   22.304232] PM: Adding info for No Bus:ttySLM84
[   22.308061] device: 'ttySLM85': device_add
[   22.312233] PM: Adding info for No Bus:ttySLM85
[   22.316058] device: 'ttySLM86': device_add
[   22.320225] PM: Adding info for No Bus:ttySLM86
[   22.324058] device: 'ttySLM87': device_add
[   22.328225] PM: Adding info for No Bus:ttySLM87
[   22.332059] device: 'ttySLM88': device_add
[   22.336226] PM: Adding info for No Bus:ttySLM88
[   22.340058] device: 'ttySLM89': device_add
[   22.344226] PM: Adding info for No Bus:ttySLM89
[   22.348077] device: 'ttySLM90': device_add
[   22.352247] PM: Adding info for No Bus:ttySLM90
[   22.356062] device: 'ttySLM91': device_add
[   22.360241] PM: Adding info for No Bus:ttySLM91
[   22.364058] device: 'ttySLM92': device_add
[   22.368247] PM: Adding info for No Bus:ttySLM92
[   22.372060] device: 'ttySLM93': device_add
[   22.376238] PM: Adding info for No Bus:ttySLM93
[   22.380069] device: 'ttySLM94': device_add
[   22.384239] PM: Adding info for No Bus:ttySLM94
[   22.388059] device: 'ttySLM95': device_add
[   22.392230] PM: Adding info for No Bus:ttySLM95
[   22.396058] device: 'ttySLM96': device_add
[   22.404109] PM: Adding info for No Bus:ttySLM96
[   22.408060] device: 'ttySLM97': device_add
[   22.412239] PM: Adding info for No Bus:ttySLM97
[   22.416059] device: 'ttySLM98': device_add
[   22.420232] PM: Adding info for No Bus:ttySLM98
[   22.424058] device: 'ttySLM99': device_add
[   22.428232] PM: Adding info for No Bus:ttySLM99
[   22.432058] device: 'ttySLM100': device_add
[   22.436231] PM: Adding info for No Bus:ttySLM100
[   22.440059] device: 'ttySLM101': device_add
[   22.444232] PM: Adding info for No Bus:ttySLM101
[   22.448059] device: 'ttySLM102': device_add
[   22.452244] PM: Adding info for No Bus:ttySLM102
[   22.456067] device: 'ttySLM103': device_add
[   22.460244] PM: Adding info for No Bus:ttySLM103
[   22.464060] device: 'ttySLM104': device_add
[   22.468235] PM: Adding info for No Bus:ttySLM104
[   22.472058] device: 'ttySLM105': device_add
[   22.476235] PM: Adding info for No Bus:ttySLM105
[   22.480058] device: 'ttySLM106': device_add
[   22.484253] PM: Adding info for No Bus:ttySLM106
[   22.488060] device: 'ttySLM107': device_add
[   22.492247] PM: Adding info for No Bus:ttySLM107
[   22.496058] device: 'ttySLM108': device_add
[   22.500256] PM: Adding info for No Bus:ttySLM108
[   22.504060] device: 'ttySLM109': device_add
[   22.508244] PM: Adding info for No Bus:ttySLM109
[   22.512059] device: 'ttySLM110': device_add
[   22.516236] PM: Adding info for No Bus:ttySLM110
[   22.520058] device: 'ttySLM111': device_add
[   22.524256] PM: Adding info for No Bus:ttySLM111
[   22.528061] device: 'ttySLM112': device_add
[   22.532240] PM: Adding info for No Bus:ttySLM112
[   22.536059] device: 'ttySLM113': device_add
[   22.540237] PM: Adding info for No Bus:ttySLM113
[   22.544058] device: 'ttySLM114': device_add
[   22.548248] PM: Adding info for No Bus:ttySLM114
[   22.552060] device: 'ttySLM115': device_add
[   22.556247] PM: Adding info for No Bus:ttySLM115
[   22.560068] device: 'ttySLM116': device_add
[   22.564248] PM: Adding info for No Bus:ttySLM116
[   22.568060] device: 'ttySLM117': device_add
[   22.572240] PM: Adding info for No Bus:ttySLM117
[   22.576057] device: 'ttySLM118': device_add
[   22.580239] PM: Adding info for No Bus:ttySLM118
[   22.584059] device: 'ttySLM119': device_add
[   22.588238] PM: Adding info for No Bus:ttySLM119
[   22.592058] device: 'ttySLM120': device_add
[   22.596251] PM: Adding info for No Bus:ttySLM120
[   22.600060] device: 'ttySLM121': device_add
[   22.604248] PM: Adding info for No Bus:ttySLM121
[   22.608071] device: 'ttySLM122': device_add
[   22.616129] PM: Adding info for No Bus:ttySLM122
[   22.620060] device: 'ttySLM123': device_add
[   22.624242] PM: Adding info for No Bus:ttySLM123
[   22.628058] device: 'ttySLM124': device_add
[   22.632244] PM: Adding info for No Bus:ttySLM124
[   22.636058] device: 'ttySLM125': device_add
[   22.640241] PM: Adding info for No Bus:ttySLM125
[   22.644059] device: 'ttySLM126': device_add
[   22.648254] PM: Adding info for No Bus:ttySLM126
[   22.652060] device: 'ttySLM127': device_add
[   22.656252] PM: Adding info for No Bus:ttySLM127
[   22.660061] SyncLink MultiPort driver $Revision: 4.38 $, tty major#251
[   22.664006] initcall synclinkmp_init+0x0/0x150 returned 0 after 1042968 usecs
[   22.668004] calling  slgt_init+0x0/0x168 @ 1
[   22.672002] SyncLink GT
[   22.674463] SyncLink GT, tty major#250
[   22.676006] bus: 'pci': add driver synclink_gt
[   22.680069] SyncLink GT no devices found
[   22.684003] initcall slgt_init+0x0/0x168 returned 0 after 11718 usecs
[   22.688004] calling  n_hdlc_init+0x0/0x81 @ 1
[   22.692002] HDLC line discipline maxframe=4096
[   22.696002] N_HDLC line discipline registered.
[   22.700003] initcall n_hdlc_init+0x0/0x81 returned 0 after 7812 usecs
[   22.704003] calling  gsm_init+0x0/0x11b @ 1
[   22.708016] gsm_init: loaded as 249,0.
[   22.712003] initcall gsm_init+0x0/0x11b returned 0 after 3906 usecs
[   22.716003] calling  raw_init+0x0/0xc7 @ 1
[   22.720006] device class 'raw': registering
[   22.724078] device: 'rawctl': device_add
[   22.728089] PM: Adding info for No Bus:rawctl
[   22.736035] initcall raw_init+0x0/0xc7 returned 0 after 15625 usecs
[   22.740004] calling  lp_init_module+0x0/0x1f4 @ 1
[   22.744010] device class 'printer': registering
[   22.748051] lp: driver loaded but no devices found
[   22.752004] initcall lp_init_module+0x0/0x1f4 returned 0 after 7812 usecs
[   22.756003] calling  dtlk_init+0x0/0x1c5 @ 1
[   22.760025] DoubleTalk PC - not found
[   22.764013] initcall dtlk_init+0x0/0x1c5 returned -19 after 3906 usecs
[   22.768003] calling  r3964_init+0x0/0x38 @ 1
[   22.772001] r3964: Philips r3964 Driver $Revision: 1.10 $
[   22.776003] initcall r3964_init+0x0/0x38 returned 0 after 3906 usecs
[   22.780002] calling  applicom_init+0x0/0x439 @ 1
[   22.784002] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[   22.788008] ac.o: No PCI boards found.
[   22.792002] ac.o: For an ISA board you must supply memory and irq parameters.
[   22.796003] initcall applicom_init+0x0/0x439 returned -6 after 11718 usecs
[   22.800003] initcall applicom_init+0x0/0x439 returned with error code -6 
[   22.804002] calling  sonypi_init+0x0/0x79 @ 1
[   22.808002] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   22.812005] initcall sonypi_init+0x0/0x79 returned -19 after 3906 usecs
[   22.816008] calling  nvram_init+0x0/0x70 @ 1
[   22.820015] device: 'nvram': device_add
[   22.824086] PM: Adding info for No Bus:nvram
[   22.828061] Non-volatile memory driver v1.3
[   22.832004] initcall nvram_init+0x0/0x70 returned 0 after 11718 usecs
[   22.836003] calling  ppdev_init+0x0/0xac @ 1
[   22.840007] device class 'ppdev': registering
[   22.844052] ppdev: user-space parallel port driver
[   22.848005] initcall ppdev_init+0x0/0xac returned 0 after 7812 usecs
[   22.852003] calling  scx200_gpio_init+0x0/0x115 @ 1
[   22.856002] scx200_gpio: no SCx200 gpio present
[   22.860003] initcall scx200_gpio_init+0x0/0x115 returned -19 after 3906 usecs
[   22.864003] calling  pc8736x_gpio_init+0x0/0x3b7 @ 1
[   22.868007] Registering platform device 'pc8736x_gpio.0'. Parent at platform
[   22.872005] device: 'pc8736x_gpio.0': device_add
[   22.876007] bus: 'platform': add device pc8736x_gpio.0
[   22.880014] PM: Adding info for platform:pc8736x_gpio.0
[   22.884058] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[   22.888009] platform pc8736x_gpio.0: no device found
[   22.892002] PM: Removing info for platform:pc8736x_gpio.0
[   22.896023] bus: 'platform': remove device pc8736x_gpio.0
[   22.900057] initcall pc8736x_gpio_init+0x0/0x3b7 returned -19 after 31250 usecs
[   22.908003] calling  nsc_gpio_init+0x0/0x11 @ 1
[   22.912001] nsc_gpio initializing
[   22.915318] initcall nsc_gpio_init+0x0/0x11 returned 0 after 0 usecs
[   22.916003] calling  cs5535_gpio_init+0x0/0x13f @ 1
[   22.920007] cs5535_gpio: DIVIL not found
[   22.924003] initcall cs5535_gpio_init+0x0/0x13f returned -19 after 3906 usecs
[   22.928003] calling  hangcheck_init+0x0/0x9d @ 1
[   22.932003] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[   22.936001] Hangcheck: Using getrawmonotonic().
[   22.940005] initcall hangcheck_init+0x0/0x9d returned 0 after 7812 usecs
[   22.944003] calling  init_tis+0x0/0x81 @ 1
[   22.948003] bus: 'pnp': add driver tpm_tis
[   22.952057] initcall init_tis+0x0/0x81 returned 0 after 3906 usecs
[   22.956003] calling  init_nsc+0x0/0x632 @ 1
[   22.960014] initcall init_nsc+0x0/0x632 returned -19 after 0 usecs
[   22.964002] calling  init_atmel+0x0/0x15f @ 1
[   22.968005] bus: 'platform': add driver tpm_atmel
[   22.972067] bus: 'platform': remove driver tpm_atmel
[   22.976048] driver: 'tpm_atmel': driver_release
[   22.980006] initcall init_atmel+0x0/0x15f returned -19 after 11718 usecs
[   22.984003] calling  init_inf+0x0/0xf @ 1
[   22.988002] bus: 'pnp': add driver tpm_inf_pnp
[   22.992054] initcall init_inf+0x0/0xf returned 0 after 3906 usecs
[   22.996003] calling  ramoops_init+0x0/0xed @ 1
[   23.000001] ramoops: invalid size specificationinitcall ramoops_init+0x0/0xed returned -22 after 3906 usecs
[   23.008004] initcall ramoops_init+0x0/0xed returned with error code -22 
[   23.012002] calling  drm_core_init+0x0/0xfb @ 1
[   23.016017] device class 'drm': registering
[   23.020077] [drm] Initialized drm 1.1.0 20060810
[   23.024004] initcall drm_core_init+0x0/0xfb returned 0 after 7812 usecs
[   23.028003] calling  ttm_init+0x0/0x64 @ 1
[   23.032005] device: 'ttm': device_add
[   23.036020] PM: Adding info for No Bus:ttm
[   23.040048] initcall ttm_init+0x0/0x64 returned 0 after 7812 usecs
[   23.044003] calling  tdfx_init+0x0/0xf @ 1
[   23.048028] initcall tdfx_init+0x0/0xf returned 0 after 0 usecs
[   23.052003] calling  r128_init+0x0/0x19 @ 1
[   23.056135] initcall r128_init+0x0/0x19 returned 0 after 0 usecs
[   23.060003] calling  radeon_init+0x0/0xae @ 1
[   23.064003] [drm] radeon defaulting to userspace modesetting.
[   23.068463] IOAPIC[0]: Set routing entry (2-5 -> 0x41 -> IRQ 31 Mode:1 Active:1)
[   23.072006] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 31
[   23.076012] pci 0000:01:00.0: setting latency timer to 64
[   23.080142] device: 'card0': device_add
[   23.084138] PM: Adding info for No Bus:card0
[   23.088146] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[   23.092864] initcall radeon_init+0x0/0xae returned 0 after 27343 usecs
[   23.096003] calling  mga_init+0x0/0x19 @ 1
[   23.100016] initcall mga_init+0x0/0x19 returned 0 after 0 usecs
[   23.104003] calling  savage_init+0x0/0x19 @ 1
[   23.108069] initcall savage_init+0x0/0x19 returned 0 after 0 usecs
[   23.112003] calling  via_init+0x0/0x1e @ 1
[   23.116032] initcall via_init+0x0/0x1e returned 0 after 0 usecs
[   23.120003] calling  serial8250_init+0x0/0x14b @ 1
[   23.124003] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   23.128037] Registering platform device 'serial8250'. Parent at platform
[   23.132003] device: 'serial8250': device_add
[   23.136007] bus: 'platform': add device serial8250
[   23.140013] PM: Adding info for platform:serial8250
[   23.144121] async_waiting @ 1
[   23.148003] async_continuing @ 1 after 0 usec
[   23.280258] async_waiting @ 1
[   23.283228] async_continuing @ 1 after 0 usec
[   23.412298] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   23.416008] device: 'ttyS0': device_add
[   23.420417] PM: Adding info for No Bus:ttyS0
[   23.424090] device: 'ttyS1': device_add
[   23.428269] PM: Adding info for No Bus:ttyS1
[   23.432077] device: 'ttyS2': device_add
[   23.436272] PM: Adding info for No Bus:ttyS2
[   23.440084] device: 'ttyS3': device_add
[   23.444256] PM: Adding info for No Bus:ttyS3
[   23.448067] bus: 'platform': add driver serial8250
[   23.452014] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
[   23.456002] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[   23.460008] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[   23.464002] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[   23.468058] initcall serial8250_init+0x0/0x14b returned 0 after 335937 usecs
[   23.472004] calling  serial8250_pnp_init+0x0/0xf @ 1
[   23.476003] bus: 'pnp': add driver serial
[   23.480057] initcall serial8250_pnp_init+0x0/0xf returned 0 after 3906 usecs
[   23.484004] calling  jsm_init_module+0x0/0x3a @ 1
[   23.488067] bus: 'pci': add driver jsm
[   23.492082] initcall jsm_init_module+0x0/0x3a returned 0 after 3906 usecs
[   23.496004] calling  timbuart_init+0x0/0xf @ 1
[   23.500004] bus: 'platform': add driver timb-uart
[   23.504056] initcall timbuart_init+0x0/0xf returned 0 after 3906 usecs
[   23.508004] calling  parport_default_proc_register+0x0/0x7 @ 1
[   23.512003] initcall parport_default_proc_register+0x0/0x7 returned 0 after 0 usecs
[   23.516003] calling  parport_ax88796_init+0x0/0xf @ 1
[   23.520003] bus: 'platform': add driver ax88796-pp
[   23.524056] initcall parport_ax88796_init+0x0/0xf returned 0 after 3906 usecs
[   23.528004] calling  isa_bus_init+0x0/0x33 @ 1
[   23.532074] bus: 'isa': registered
[   23.536005] device: 'isa': device_add
[   23.540009] PM: Adding info for No Bus:isa
[   23.544005] initcall isa_bus_init+0x0/0x33 returned 0 after 11718 usecs
[   23.548004] calling  topology_sysfs_init+0x0/0x5e @ 1
[   23.552027] initcall topology_sysfs_init+0x0/0x5e returned 0 after 0 usecs
[   23.556003] calling  brd_init+0x0/0x14e @ 1
[   23.560368] device: 'ram0': device_add
[   23.564033] PM: Adding info for No Bus:ram0
[   23.568113] device: '1:0': device_add
[   23.572015] PM: Adding info for No Bus:1:0
[   23.576073] device: 'ram1': device_add
[   23.580039] PM: Adding info for No Bus:ram1
[   23.584088] device: '1:1': device_add
[   23.588014] PM: Adding info for No Bus:1:1
[   23.592072] device: 'ram2': device_add
[   23.596038] PM: Adding info for No Bus:ram2
[   23.600097] device: '1:2': device_add
[   23.604024] PM: Adding info for No Bus:1:2
[   23.608063] device: 'ram3': device_add
[   23.612029] PM: Adding info for No Bus:ram3
[   23.616095] device: '1:3': device_add
[   23.620014] PM: Adding info for No Bus:1:3
[   23.624069] device: 'ram4': device_add
[   23.628031] PM: Adding info for No Bus:ram4
[   23.632096] device: '1:4': device_add
[   23.636014] PM: Adding info for No Bus:1:4
[   23.640074] device: 'ram5': device_add
[   23.644030] PM: Adding info for No Bus:ram5
[   23.648107] device: '1:5': device_add
[   23.652015] PM: Adding info for No Bus:1:5
[   23.656076] device: 'ram6': device_add
[   23.660039] PM: Adding info for No Bus:ram6
[   23.664088] device: '1:6': device_add
[   23.668017] PM: Adding info for No Bus:1:6
[   23.672060] device: 'ram7': device_add
[   23.676039] PM: Adding info for No Bus:ram7
[   23.680087] device: '1:7': device_add
[   23.684014] PM: Adding info for No Bus:1:7
[   23.688070] device: 'ram8': device_add
[   23.692027] PM: Adding info for No Bus:ram8
[   23.696087] device: '1:8': device_add
[   23.699763] PM: Adding info for No Bus:1:8
[   23.700062] device: 'ram9': device_add
[   23.703837] PM: Adding info for No Bus:ram9
[   23.704095] device: '1:9': device_add
[   23.707761] PM: Adding info for No Bus:1:9
[   23.712018] device: 'ram10': device_add
[   23.715878] PM: Adding info for No Bus:ram10
[   23.716104] device: '1:10': device_add
[   23.720015] PM: Adding info for No Bus:1:10
[   23.724069] device: 'ram11': device_add
[   23.728040] PM: Adding info for No Bus:ram11
[   23.732087] device: '1:11': device_add
[   23.736015] PM: Adding info for No Bus:1:11
[   23.740060] device: 'ram12': device_add
[   23.744039] PM: Adding info for No Bus:ram12
[   23.748088] device: '1:12': device_add
[   23.752014] PM: Adding info for No Bus:1:12
[   23.756059] device: 'ram13': device_add
[   23.760040] PM: Adding info for No Bus:ram13
[   23.764087] device: '1:13': device_add
[   23.768024] PM: Adding info for No Bus:1:13
[   23.772072] device: 'ram14': device_add
[   23.776066] PM: Adding info for No Bus:ram14
[   23.780103] device: '1:14': device_add
[   23.784015] PM: Adding info for No Bus:1:14
[   23.788069] device: 'ram15': device_add
[   23.792031] PM: Adding info for No Bus:ram15
[   23.796102] device: '1:15': device_add
[   23.800015] PM: Adding info for No Bus:1:15
[   23.804093] brd: module loaded
[   23.808006] initcall brd_init+0x0/0x14e returned 0 after 242187 usecs
[   23.812003] calling  loop_init+0x0/0x167 @ 1
[   23.816242] device: 'loop0': device_add
[   23.820031] PM: Adding info for No Bus:loop0
[   23.824095] device: '7:0': device_add
[   23.828014] PM: Adding info for No Bus:7:0
[   23.832061] device: 'loop1': device_add
[   23.836038] PM: Adding info for No Bus:loop1
[   23.840085] device: '7:1': device_add
[   23.844015] PM: Adding info for No Bus:7:1
[   23.848067] device: 'loop2': device_add
[   23.852040] PM: Adding info for No Bus:loop2
[   23.856086] device: '7:2': device_add
[   23.860023] PM: Adding info for No Bus:7:2
[   23.864060] device: 'loop3': device_add
[   23.868031] PM: Adding info for No Bus:loop3
[   23.872093] device: '7:3': device_add
[   23.876015] PM: Adding info for No Bus:7:3
[   23.880061] device: 'loop4': device_add
[   23.884030] PM: Adding info for No Bus:loop4
[   23.892029] device: '7:4': device_add
[   23.895700] PM: Adding info for No Bus:7:4
[   23.896059] device: 'loop5': device_add
[   23.900041] PM: Adding info for No Bus:loop5
[   23.908094] device: '7:5': device_add
[   23.911767] PM: Adding info for No Bus:7:5
[   23.912067] device: 'loop6': device_add
[   23.916040] PM: Adding info for No Bus:loop6
[   23.920085] device: '7:6': device_add
[   23.923753] PM: Adding info for No Bus:7:6
[   23.924071] device: 'loop7': device_add
[   23.928041] PM: Adding info for No Bus:loop7
[   23.932099] device: '7:7': device_add
[   23.935777] PM: Adding info for No Bus:7:7
[   23.936061] loop: module loaded
[   23.939205] initcall loop_init+0x0/0x167 returned 0 after 117187 usecs
[   23.940004] calling  cpqarray_init+0x0/0x235 @ 1
[   23.944002] Compaq SMART2 Driver (v 2.6.0)
[   23.948006] bus: 'pci': add driver cpqarray
[   23.952083] bus: 'pci': remove driver cpqarray
[   23.956052] driver: 'cpqarray': driver_release
[   23.960008] initcall cpqarray_init+0x0/0x235 returned -19 after 15625 usecs
[   23.964004] calling  cciss_init+0x0/0x81 @ 1
[   23.968002] HP CISS Driver (v 3.6.20)
[   23.972063] bus: 'cciss': registered
[   23.976043] bus: 'pci': add driver cciss
[   23.980090] initcall cciss_init+0x0/0x81 returned 0 after 11718 usecs
[   23.988003] calling  pkt_init+0x0/0x1ca @ 1
[   23.992052] device class 'pktcdvd': registering
[   23.996084] device: 'pktcdvd': device_add
[   24.000217] PM: Adding info for No Bus:pktcdvd
[   24.004072] initcall pkt_init+0x0/0x1ca returned 0 after 11718 usecs
[   24.012003] calling  nbd_init+0x0/0x2a7 @ 1
[   24.016990] nbd: registered device at major 43
[   24.020016] device: 'nbd0': device_add
[   24.024048] PM: Adding info for No Bus:nbd0
[   24.028111] device: '43:0': device_add
[   24.032026] PM: Adding info for No Bus:43:0
[   24.036076] device: 'nbd1': device_add
[   24.040032] PM: Adding info for No Bus:nbd1
[   24.044112] device: '43:1': device_add
[   24.048015] PM: Adding info for No Bus:43:1
[   24.052061] device: 'nbd2': device_add
[   24.056039] PM: Adding info for No Bus:nbd2
[   24.060110] device: '43:2': device_add
[   24.064024] PM: Adding info for No Bus:43:2
[   24.068079] device: 'nbd3': device_add
[   24.072032] PM: Adding info for No Bus:nbd3
[   24.076112] device: '43:3': device_add
[   24.080015] PM: Adding info for No Bus:43:3
[   24.084060] device: 'nbd4': device_add
[   24.088039] PM: Adding info for No Bus:nbd4
[   24.092103] device: '43:4': device_add
[   24.096023] PM: Adding info for No Bus:43:4
[   24.100084] device: 'nbd5': device_add
[   24.104032] PM: Adding info for No Bus:nbd5
[   24.108125] device: '43:5': device_add
[   24.112016] PM: Adding info for No Bus:43:5
[   24.116063] device: 'nbd6': device_add
[   24.120032] PM: Adding info for No Bus:nbd6
[   24.124114] device: '43:6': device_add
[   24.128015] PM: Adding info for No Bus:43:6
[   24.132077] device: 'nbd7': device_add
[   24.136032] PM: Adding info for No Bus:nbd7
[   24.140154] device: '43:7': device_add
[   24.144016] PM: Adding info for No Bus:43:7
[   24.148069] device: 'nbd8': device_add
[   24.152031] PM: Adding info for No Bus:nbd8
[   24.156113] device: '43:8': device_add
[   24.160015] PM: Adding info for No Bus:43:8
[   24.164061] device: 'nbd9': device_add
[   24.168040] PM: Adding info for No Bus:nbd9
[   24.172113] device: '43:9': device_add
[   24.176016] PM: Adding info for No Bus:43:9
[   24.180061] device: 'nbd10': device_add
[   24.184042] PM: Adding info for No Bus:nbd10
[   24.188113] device: '43:10': device_add
[   24.192016] PM: Adding info for No Bus:43:10
[   24.196062] device: 'nbd11': device_add
[   24.200040] PM: Adding info for No Bus:nbd11
[   24.204113] device: '43:11': device_add
[   24.208016] PM: Adding info for No Bus:43:11
[   24.216069] device: 'nbd12': device_add
[   24.219934] PM: Adding info for No Bus:nbd12
[   24.224113] device: '43:12': device_add
[   24.228019] PM: Adding info for No Bus:43:12
[   24.232068] device: 'nbd13': device_add
[   24.236041] PM: Adding info for No Bus:nbd13
[   24.240113] device: '43:13': device_add
[   24.244016] PM: Adding info for No Bus:43:13
[   24.248071] device: 'nbd14': device_add
[   24.252033] PM: Adding info for No Bus:nbd14
[   24.256123] device: '43:14': device_add
[   24.260016] PM: Adding info for No Bus:43:14
[   24.264062] device: 'nbd15': device_add
[   24.268040] PM: Adding info for No Bus:nbd15
[   24.272120] device: '43:15': device_add
[   24.276016] PM: Adding info for No Bus:43:15
[   24.280061] initcall nbd_init+0x0/0x2a7 returned 0 after 257812 usecs
[   24.288004] calling  init_cryptoloop+0x0/0x26 @ 1
[   24.292003] initcall init_cryptoloop+0x0/0x26 returned 0 after 0 usecs
[   24.296003] calling  tifm_7xx1_init+0x0/0x16 @ 1
[   24.304007] bus: 'pci': add driver tifm_7xx1
[   24.308070] initcall tifm_7xx1_init+0x0/0x16 returned 0 after 3906 usecs
[   24.312003] calling  phantom_init+0x0/0xe1 @ 1
[   24.316003] device class 'phantom': registering
[   24.324059] bus: 'pci': add driver phantom
[   24.328060] Phantom Linux Driver, version n0.9.8, init OK
[   24.332003] initcall phantom_init+0x0/0xe1 returned 0 after 15625 usecs
[   24.340003] calling  ioc4_init+0x0/0x16 @ 1
[   24.344003] bus: 'pci': add driver IOC4
[   24.348060] initcall ioc4_init+0x0/0x16 returned 0 after 3906 usecs
[   24.352003] calling  enclosure_init+0x0/0x14 @ 1
[   24.356002] device class 'enclosure': registering
[   24.364052] initcall enclosure_init+0x0/0x14 returned 0 after 7812 usecs
[   24.368003] calling  init_kgdbts+0x0/0x15 @ 1
[   24.372003] initcall init_kgdbts+0x0/0x15 returned 0 after 0 usecs
[   24.380003] calling  cs5535_mfgpt_init+0x0/0x1b2 @ 1
[   24.384018] initcall cs5535_mfgpt_init+0x0/0x1b2 returned -19 after 0 usecs
[   24.392003] calling  isl29003_init+0x0/0x11 @ 1
[   24.396004] bus: 'i2c': add driver isl29003
[   24.400055] i2c-core: driver [isl29003] registered
[   24.404004] initcall isl29003_init+0x0/0x11 returned 0 after 7812 usecs
[   24.412003] calling  c2port_init+0x0/0x45 @ 1
[   24.416002] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[   24.424011] device class 'c2port': registering
[   24.428053] initcall c2port_init+0x0/0x45 returned 0 after 11718 usecs
[   24.436003] calling  duramar2150_c2port_init+0x0/0x61 @ 1
[   24.440024] device: 'c2port0': device_add
[   24.444034] PM: Adding info for No Bus:c2port0
[   24.448050] c2port c2port0: C2 port uc added
[   24.452003] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[   24.460004] initcall duramar2150_c2port_init+0x0/0x61 returned 0 after 19531 usecs
[   24.468003] calling  at24_init+0x0/0x2a @ 1
[   24.472003] bus: 'i2c': add driver at24
[   24.476052] i2c-core: driver [at24] registered
[   24.480004] initcall at24_init+0x0/0x2a returned 0 after 7812 usecs
[   24.488004] calling  cb710_init_module+0x0/0x16 @ 1
[   24.492004] bus: 'pci': add driver cb710
[   24.496061] initcall cb710_init_module+0x0/0x16 returned 0 after 3906 usecs
[   24.504003] calling  vmballoon_init+0x0/0x166 @ 1
[   24.508003] initcall vmballoon_init+0x0/0x166 returned -19 after 0 usecs
[   24.512003] calling  sm501_base_init+0x0/0x20 @ 1
[   24.520005] bus: 'platform': add driver sm501
[   24.524061] bus: 'pci': add driver sm501
[   24.528060] initcall sm501_base_init+0x0/0x20 returned 0 after 7812 usecs
[   24.532003] calling  wm8994_i2c_init+0x0/0x2a @ 1
[   24.540002] bus: 'i2c': add driver wm8994
[   24.544053] i2c-core: driver [wm8994] registered
[   24.548004] initcall wm8994_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[   24.552003] calling  timberdale_init+0x0/0x45 @ 1
[   24.560004] bus: 'pci': add driver timberdale
[   24.564068] Driver for timberdale has been successfully registered.
[   24.568004] initcall timberdale_init+0x0/0x45 returned 0 after 7812 usecs
[   24.576003] calling  lpc_sch_init+0x0/0x16 @ 1
[   24.580004] bus: 'pci': add driver lpc_sch
[   24.584062] initcall lpc_sch_init+0x0/0x16 returned 0 after 3906 usecs
[   24.592003] calling  rdc321x_sb_init+0x0/0x16 @ 1
[   24.596003] bus: 'pci': add driver RDC321x Southbridge
[   24.600062] initcall rdc321x_sb_init+0x0/0x16 returned 0 after 3906 usecs
[   24.608003] calling  scsi_tgt_init+0x0/0x72 @ 1
[   24.612198] device: 'tgt': device_add
[   24.616219] PM: Adding info for No Bus:tgt
[   24.620064] initcall scsi_tgt_init+0x0/0x72 returned 0 after 7812 usecs
[   24.628003] calling  raid_init+0x0/0xf @ 1
[   24.632002] device class 'raid_devices': registering
[   24.636057] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   24.644003] calling  spi_transport_init+0x0/0x65 @ 1
[   24.648006] device class 'spi_transport': registering
[   24.652051] device class 'spi_host': registering
[   24.656052] initcall spi_transport_init+0x0/0x65 returned 0 after 7812 usecs
[   24.664003] calling  fc_transport_init+0x0/0x71 @ 1
[   24.668002] device class 'fc_host': registering
[   24.672050] device class 'fc_vports': registering
[   24.680050] device class 'fc_remote_ports': registering
[   24.684050] device class 'fc_transport': registering
[   24.688051] initcall fc_transport_init+0x0/0x71 returned 0 after 19531 usecs
[   24.696004] calling  iscsi_transport_init+0x0/0x11f @ 1
[   24.700002] Loading iSCSI transport class v2.0-870.
[   24.704002] device class 'iscsi_transport': registering
[   24.712061] device class 'iscsi_endpoint': registering
[   24.716050] device class 'iscsi_host': registering
[   24.720050] device class 'iscsi_connection': registering
[   24.728050] device class 'iscsi_session': registering
[   24.732078] initcall iscsi_transport_init+0x0/0x11f returned 0 after 31250 usecs
[   24.736004] calling  sas_transport_init+0x0/0x9f @ 1
[   24.740002] device class 'sas_host': registering
[   24.744063] device class 'sas_phy': registering
[   24.748052] device class 'sas_port': registering
[   24.752051] device class 'sas_device': registering
[   24.756050] device class 'sas_end_device': registering
[   24.760059] device class 'sas_expander': registering
[   24.764052] initcall sas_transport_init+0x0/0x9f returned 0 after 23437 usecs
[   24.768004] calling  sas_class_init+0x0/0x2c @ 1
[   24.772184] initcall sas_class_init+0x0/0x2c returned 0 after 0 usecs
[   24.776003] calling  scsi_dh_init+0x0/0x34 @ 1
[   24.780005] initcall scsi_dh_init+0x0/0x34 returned 0 after 0 usecs
[   24.784003] calling  clariion_init+0x0/0x2c @ 1
[   24.788002] emc: device handler registered
[   24.792004] initcall clariion_init+0x0/0x2c returned 0 after 3906 usecs
[   24.796003] calling  alua_init+0x0/0x2c @ 1
[   24.800002] alua: device handler registered
[   24.804004] initcall alua_init+0x0/0x2c returned 0 after 3906 usecs
[   24.808003] calling  libfc_init+0x0/0x39 @ 1
[   24.812314] initcall libfc_init+0x0/0x39 returned 0 after 0 usecs
[   24.816006] calling  fcoe_init+0x0/0x164 @ 1
[   24.820051] initcall fcoe_init+0x0/0x164 returned 0 after 0 usecs
[   24.824003] calling  fnic_init_module+0x0/0x1a7 @ 1
[   24.828003] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[   24.832465] bus: 'pci': add driver fnic
[   24.836083] initcall fnic_init_module+0x0/0x1a7 returned 0 after 7812 usecs
[   24.844004] calling  iscsi_sw_tcp_init+0x0/0x3a @ 1
[   24.848009] device: 'tcp': device_add
[   24.852011] PM: Adding info for No Bus:tcp
[   24.856051] iscsi: registered transport (tcp)
[   24.860004] initcall iscsi_sw_tcp_init+0x0/0x3a returned 0 after 11718 usecs
[   24.868003] calling  advansys_init+0x0/0x5e @ 1
[   24.872002] bus: 'isa': add driver advansys
[   24.876057] device: 'advansys.0': device_add
[   24.880006] bus: 'isa': add device advansys.0
[   24.884011] PM: Adding info for isa:advansys.0
[   24.888047] bus: 'isa': driver_probe_device: matched device advansys.0 with driver advansys
[   24.896002] bus: 'isa': really_probe: probing driver advansys with device advansys.0
[   24.904032] device: 'advansys.1': device_add
[   24.908006] bus: 'isa': add device advansys.1
[   24.912021] PM: Adding info for isa:advansys.1
[   24.920047] bus: 'isa': driver_probe_device: matched device advansys.1 with driver advansys
[   24.928002] bus: 'isa': really_probe: probing driver advansys with device advansys.1
[   24.936022] device: 'advansys.2': device_add
[   24.940005] bus: 'isa': add device advansys.2
[   24.944031] PM: Adding info for isa:advansys.2
[   24.948045] bus: 'isa': driver_probe_device: matched device advansys.2 with driver advansys
[   24.956002] bus: 'isa': really_probe: probing driver advansys with device advansys.2
[   24.964022] device: 'advansys.3': device_add
[   24.968008] bus: 'isa': add device advansys.3
[   24.972016] PM: Adding info for isa:advansys.3
[   24.976046] bus: 'isa': driver_probe_device: matched device advansys.3 with driver advansys
[   24.984002] bus: 'isa': really_probe: probing driver advansys with device advansys.3
[   24.992021] device: 'advansys.4': device_add
[   24.996007] bus: 'isa': add device advansys.4
[   25.000019] PM: Adding info for isa:advansys.4
[   25.004047] bus: 'isa': driver_probe_device: matched device advansys.4 with driver advansys
[   25.016002] bus: 'isa': really_probe: probing driver advansys with device advansys.4
[   25.020023] device: 'advansys.5': device_add
[   25.028006] bus: 'isa': add device advansys.5
[   25.032011] PM: Adding info for isa:advansys.5
[   25.036045] bus: 'isa': driver_probe_device: matched device advansys.5 with driver advansys
[   25.044002] bus: 'isa': really_probe: probing driver advansys with device advansys.5
[   25.052021] device: 'advansys.6': device_add
[   25.056006] bus: 'isa': add device advansys.6
[   25.060011] PM: Adding info for isa:advansys.6
[   25.064045] bus: 'isa': driver_probe_device: matched device advansys.6 with driver advansys
[   25.072002] bus: 'isa': really_probe: probing driver advansys with device advansys.6
[   25.080020] device: 'advansys.7': device_add
[   25.084007] bus: 'isa': add device advansys.7
[   25.088011] PM: Adding info for isa:advansys.7
[   25.092045] bus: 'isa': driver_probe_device: matched device advansys.7 with driver advansys
[   25.100002] bus: 'isa': really_probe: probing driver advansys with device advansys.7
[   25.108027] device: 'advansys.8': device_add
[   25.112006] bus: 'isa': add device advansys.8
[   25.120021] PM: Adding info for isa:advansys.8
[   25.124047] bus: 'isa': driver_probe_device: matched device advansys.8 with driver advansys
[   25.132002] bus: 'isa': really_probe: probing driver advansys with device advansys.8
[   25.140022] device: 'advansys.9': device_add
[   25.144006] bus: 'isa': add device advansys.9
[   25.148011] PM: Adding info for isa:advansys.9
[   25.152045] bus: 'isa': driver_probe_device: matched device advansys.9 with driver advansys
[   25.160002] bus: 'isa': really_probe: probing driver advansys with device advansys.9
[   25.168020] device: 'advansys.10': device_add
[   25.172006] bus: 'isa': add device advansys.10
[   25.176020] PM: Adding info for isa:advansys.10
[   25.180047] bus: 'isa': driver_probe_device: matched device advansys.10 with driver advansys
[   25.188002] bus: 'isa': really_probe: probing driver advansys with device advansys.10
[   25.196021] bus: 'isa': add driver advansys_vlb
[   25.204057] device: 'advansys_vlb.0': device_add
[   25.208006] bus: 'isa': add device advansys_vlb.0
[   25.212011] PM: Adding info for isa:advansys_vlb.0
[   25.216046] bus: 'isa': driver_probe_device: matched device advansys_vlb.0 with driver advansys_vlb
[   25.224002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.0
[   25.232022] device: 'advansys_vlb.1': device_add
[   25.240006] bus: 'isa': add device advansys_vlb.1
[   25.244011] PM: Adding info for isa:advansys_vlb.1
[   25.248046] bus: 'isa': driver_probe_device: matched device advansys_vlb.1 with driver advansys_vlb
[   25.256002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.1
[   25.264021] device: 'advansys_vlb.2': device_add
[   25.272006] bus: 'isa': add device advansys_vlb.2
[   25.276011] PM: Adding info for isa:advansys_vlb.2
[   25.280046] bus: 'isa': driver_probe_device: matched device advansys_vlb.2 with driver advansys_vlb
[   25.288002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.2
[   25.296020] device: 'advansys_vlb.3': device_add
[   25.300006] bus: 'isa': add device advansys_vlb.3
[   25.308011] PM: Adding info for isa:advansys_vlb.3
[   25.312046] bus: 'isa': driver_probe_device: matched device advansys_vlb.3 with driver advansys_vlb
[   25.320002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.3
[   25.328019] device: 'advansys_vlb.4': device_add
[   25.332006] bus: 'isa': add device advansys_vlb.4
[   25.340021] PM: Adding info for isa:advansys_vlb.4
[   25.344047] bus: 'isa': driver_probe_device: matched device advansys_vlb.4 with driver advansys_vlb
[   25.352002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.4
[   25.360023] device: 'advansys_vlb.5': device_add
[   25.364006] bus: 'isa': add device advansys_vlb.5
[   25.368011] PM: Adding info for isa:advansys_vlb.5
[   25.376046] bus: 'isa': driver_probe_device: matched device advansys_vlb.5 with driver advansys_vlb
[   25.384002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.5
[   25.392034] device: 'advansys_vlb.6': device_add
[   25.396007] bus: 'isa': add device advansys_vlb.6
[   25.400011] PM: Adding info for isa:advansys_vlb.6
[   25.408046] bus: 'isa': driver_probe_device: matched device advansys_vlb.6 with driver advansys_vlb
[   25.416002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.6
[   25.424023] device: 'advansys_vlb.7': device_add
[   25.428006] bus: 'isa': add device advansys_vlb.7
[   25.432011] PM: Adding info for isa:advansys_vlb.7
[   25.440028] bus: 'isa': driver_probe_device: matched device advansys_vlb.7 with driver advansys_vlb
[   25.448002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.7
[   25.456022] device: 'advansys_vlb.8': device_add
[   25.460006] bus: 'isa': add device advansys_vlb.8
[   25.464012] PM: Adding info for isa:advansys_vlb.8
[   25.468046] bus: 'isa': driver_probe_device: matched device advansys_vlb.8 with driver advansys_vlb
[   25.480002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.8
[   25.488021] device: 'advansys_vlb.9': device_add
[   25.492006] bus: 'isa': add device advansys_vlb.9
[   25.496011] PM: Adding info for isa:advansys_vlb.9
[   25.500046] bus: 'isa': driver_probe_device: matched device advansys_vlb.9 with driver advansys_vlb
[   25.512002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.9
[   25.520028] device: 'advansys_vlb.10': device_add
[   25.524007] bus: 'isa': add device advansys_vlb.10
[   25.528020] PM: Adding info for isa:advansys_vlb.10
[   25.532047] bus: 'isa': driver_probe_device: matched device advansys_vlb.10 with driver advansys_vlb
[   25.544002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.10
[   25.552024] bus: 'pci': add driver advansys
[   25.556063] initcall advansys_init+0x0/0x5e returned 0 after 667968 usecs
[   25.564003] calling  adpt_init+0x0/0xdfd @ 1
[   25.568002] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[   25.572001] Detecting Adaptec I2O RAID controllers...
[   25.576008] initcall adpt_init+0x0/0xdfd returned -19 after 7812 usecs
[   25.584003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.588027] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.596007] calling  arcmsr_module_init+0x0/0x16 @ 1
[   25.600004] bus: 'pci': add driver arcmsr
[   25.604062] initcall arcmsr_module_init+0x0/0x16 returned 0 after 3906 usecs
[   25.612003] calling  ahc_linux_init+0x0/0x4f @ 1
[   25.616006] bus: 'pci': add driver aic7xxx
[   25.620069] initcall ahc_linux_init+0x0/0x4f returned 0 after 3906 usecs
[   25.628003] calling  aac_init+0x0/0x65 @ 1
[   25.632002] Adaptec aacraid driver 1.1-5[26400]-ms
[   25.636004] bus: 'pci': add driver aacraid
[   25.640069] initcall aac_init+0x0/0x65 returned 0 after 7812 usecs
[   25.648003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.652249] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.660003] calling  aic94xx_init+0x0/0x115 @ 1
[   25.664002] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[   25.672341] bus: 'pci': add driver aic94xx
[   25.676074] initcall aic94xx_init+0x0/0x115 returned 0 after 11718 usecs
[   25.680003] calling  pm8001_init+0x0/0x4c @ 1
[   25.688016] bus: 'pci': add driver pm8001
[   25.692070] initcall pm8001_init+0x0/0x4c returned 0 after 3906 usecs
[   25.696003] calling  ips_module_init+0x0/0x37e @ 1
[   25.700004] bus: 'pci': add driver ips
[   25.704073] bus: 'pci': remove driver ips
[   25.708050] driver: 'ips': driver_release
[   25.712008] initcall ips_module_init+0x0/0x37e returned -19 after 11718 usecs
[   25.720003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.724004] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.732003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.740004] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.744003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.752043] NCR53c406a: no available ports found
[   25.756003] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 3906 usecs
[   25.764003] calling  qlogicfas408_init+0x0/0x7 @ 1
[   25.768003] initcall qlogicfas408_init+0x0/0x7 returned 0 after 0 usecs
[   25.776003] calling  qlogicfas_init+0x0/0x1f4 @ 1
[   25.780002] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsinitcall qlogicfas_init+0x0/0x1f4 returned -19 after 7812 usecs
[   25.796003] calling  qla1280_init+0x0/0x16 @ 1
[   25.800004] bus: 'pci': add driver qla1280
[   25.804068] initcall qla1280_init+0x0/0x16 returned 0 after 3906 usecs
[   25.808003] calling  qla2x00_module_init+0x0/0x131 @ 1
[   25.816179] QLogic Fibre Channel HBA Driver: 8.03.02-k2
[   25.820006] bus: 'pci': add driver qla2xxx
[   25.824062] initcall qla2x00_module_init+0x0/0x131 returned 0 after 7812 usecs
[   25.832003] calling  qla4xxx_module_init+0x0/0xbd @ 1
[   25.836157] device: 'qla4xxx': device_add
[   25.840011] PM: Adding info for No Bus:qla4xxx
[   25.844049] iscsi: registered transport (qla4xxx)
[   25.848005] bus: 'pci': add driver qla4xxx
[   25.856060] QLogic iSCSI HBA Driver
[   25.859541] initcall qla4xxx_module_init+0x0/0xbd returned 0 after 19531 usecs
[   25.864003] calling  lpfc_init+0x0/0xad @ 1
[   25.868002] Emulex LightPulse Fibre Channel SCSI driver 8.3.12
[   25.876001] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[   25.880027] bus: 'pci': add driver lpfc
[   25.884073] initcall lpfc_init+0x0/0xad returned 0 after 15625 usecs
[   25.892004] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.896011] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.904003] calling  hpsa_init+0x0/0x16 @ 1
[   25.908004] bus: 'pci': add driver hpsa
[   25.912061] initcall hpsa_init+0x0/0x16 returned 0 after 3906 usecs
[   25.916003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.924006] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.932003] calling  dc395x_module_init+0x0/0x16 @ 1
[   25.936004] bus: 'pci': add driver dc395x
[   25.940060] initcall dc395x_module_init+0x0/0x16 returned 0 after 3906 usecs
[   25.948003] calling  dc390_module_init+0x0/0x89 @ 1
[   25.952002] DC390: clustering now enabled by default. If you get problems load
[   25.960002]        with "disable_clustering=1" and report to maintainers
[   25.964004] bus: 'pci': add driver tmscsim
[   25.968060] initcall dc390_module_init+0x0/0x89 returned 0 after 15625 usecs
[   25.976003] calling  megaraid_init+0x0/0xa6 @ 1
[   25.980017] bus: 'pci': add driver megaraid_legacy
[   25.984068] initcall megaraid_init+0x0/0xa6 returned 0 after 3906 usecs
[   25.992003] calling  _scsih_init+0x0/0x11b @ 1
[   25.996002] mpt2sas version 05.100.00.02 loaded
[   26.000021] device: 'mpt2ctl': device_add
[   26.004180] PM: Adding info for No Bus:mpt2ctl
[   26.012055] bus: 'pci': add driver mpt2sas
[   26.016077] initcall _scsih_init+0x0/0x11b returned 0 after 19531 usecs
[   26.020004] calling  gdth_init+0x0/0x7f2 @ 1
[   26.024002] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[   26.032008] bus: 'pci': add driver gdth
[   26.036068] initcall gdth_init+0x0/0x7f2 returned 0 after 11718 usecs
[   26.040003] calling  initio_init_driver+0x0/0x16 @ 1
[   26.048004] bus: 'pci': add driver initio
[   26.052062] initcall initio_init_driver+0x0/0x16 returned 0 after 3906 usecs
[   26.056003] calling  inia100_init+0x0/0x16 @ 1
[   26.064004] bus: 'pci': add driver inia100
[   26.068061] initcall inia100_init+0x0/0x16 returned 0 after 3906 usecs
[   26.072003] calling  tw_init+0x0/0x25 @ 1
[   26.076002] 3ware Storage Controller device driver for Linux v1.26.02.003.
[   26.084004] bus: 'pci': add driver 3w-xxxx
[   26.088061] initcall tw_init+0x0/0x25 returned 0 after 11718 usecs
[   26.096003] calling  twa_init+0x0/0x25 @ 1
[   26.100002] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[   26.104005] bus: 'pci': add driver 3w-9xxx
[   26.108061] initcall twa_init+0x0/0x25 returned 0 after 7812 usecs
[   26.116005] calling  twl_init+0x0/0x25 @ 1
[   26.120002] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[   26.128005] bus: 'pci': add driver 3w-sas
[   26.132073] initcall twl_init+0x0/0x25 returned 0 after 11718 usecs
[   26.136003] calling  init_nsp32+0x0/0x2c @ 1
[   26.144002] nsp32: loading...
[   26.146973] bus: 'pci': add driver nsp32
[   26.148070] initcall init_nsp32+0x0/0x2c returned 0 after 3906 usecs
[   26.156003] calling  ipr_init+0x0/0x34 @ 1
[   26.160002] ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
[   26.168005] bus: 'pci': add driver ipr
[   26.172063] initcall ipr_init+0x0/0x34 returned 0 after 11718 usecs
[   26.176003] calling  hptiop_module_init+0x0/0x2a @ 1
[   26.184002] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[   26.188005] bus: 'pci': add driver hptiop
[   26.192062] initcall hptiop_module_init+0x0/0x2a returned 0 after 7812 usecs
[   26.200003] calling  cxgb3i_init_module+0x0/0x41 @ 1
[   26.204003] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[   26.212008] device: 'cxgb3i': device_add
[   26.216011] PM: Adding info for No Bus:cxgb3i
[   26.220049] iscsi: registered transport (cxgb3i)
[   26.224009] initcall cxgb3i_init_module+0x0/0x41 returned 0 after 19531 usecs
[   26.232003] calling  bnx2i_mod_init+0x0/0xa5 @ 1
[   26.236002] Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.1 (Mar 24, 2010)
[   26.240008] device: 'bnx2i': device_add
[   26.244011] PM: Adding info for No Bus:bnx2i
[   26.252049] iscsi: registered transport (bnx2i)
[   26.256006] initcall bnx2i_mod_init+0x0/0xa5 returned 0 after 19531 usecs
[   26.260003] calling  beiscsi_module_init+0x0/0x88 @ 1
[   26.268008] device: 'be2iscsi': device_add
[   26.272010] PM: Adding info for No Bus:be2iscsi
[   26.276048] iscsi: registered transport (be2iscsi)
[   26.280006] bus: 'pci': add driver be2iscsi
[   26.284062] initcall beiscsi_module_init+0x0/0x88 returned 0 after 15625 usecs
[   26.292003] calling  pmcraid_init+0x0/0x10e @ 1
[   26.296013] device class 'pmcsas': registering
[   26.300104] bus: 'pci': add driver PMC MaxRAID
[   26.304072] initcall pmcraid_init+0x0/0x10e returned 0 after 7812 usecs
[   26.312004] calling  pvscsi_init+0x0/0x2a @ 1
[   26.316002] VMware PVSCSI driver - version 1.0.1.0-k
[   26.320005] bus: 'pci': add driver vmw_pvscsi
[   26.324062] initcall pvscsi_init+0x0/0x2a returned 0 after 7812 usecs
[   26.332003] calling  init_st+0x0/0x162 @ 1
[   26.336003] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[   26.344002] device class 'scsi_tape': registering
[   26.348053] bus: 'scsi': add driver st
[   26.352061] initcall init_st+0x0/0x162 returned 0 after 15625 usecs
[   26.356003] calling  init_osst+0x0/0x124 @ 1
[   26.360002] osst :I: Tape driver with OnStream support version 0.99.4
[   26.360004] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   26.376004] device class 'onstream_tape': registering
[   26.380054] bus: 'scsi': add driver osst
[   26.384055] initcall init_osst+0x0/0x124 returned 0 after 23437 usecs
[   26.388003] calling  init_sd+0x0/0x12e @ 1
[   26.396016] device class 'scsi_disk': registering
[   26.400062] bus: 'scsi': add driver sd
[   26.404241] initcall init_sd+0x0/0x12e returned 0 after 7812 usecs
[   26.408003] calling  init_sr+0x0/0x3d @ 1
[   26.412009] bus: 'scsi': add driver sr
[   26.416057] initcall init_sr+0x0/0x3d returned 0 after 3906 usecs
[   26.424003] calling  init_ch_module+0x0/0x9d @ 1
[   26.428002] SCSI Media Changer driver v0.25 
[   26.432002] device class 'scsi_changer': registering
[   26.436056] bus: 'scsi': add driver ch
[   26.440065] initcall init_ch_module+0x0/0x9d returned 0 after 11718 usecs
[   26.448004] calling  ses_init+0x0/0x33 @ 1
[   26.452003] bus: 'scsi': add driver ses
[   26.456056] initcall ses_init+0x0/0x33 returned 0 after 3906 usecs
[   26.460003] calling  ahci_init+0x0/0x16 @ 1
[   26.464007] bus: 'pci': add driver ahci
[   26.468075] initcall ahci_init+0x0/0x16 returned 0 after 3906 usecs
[   26.476003] calling  ahci_init+0x0/0x14 @ 1
[   26.480005] bus: 'platform': add driver ahci
[   26.484062] bus: 'platform': remove driver ahci
[   26.488052] driver: 'ahci': driver_release
[   26.492007] initcall ahci_init+0x0/0x14 returned -19 after 11718 usecs
[   26.500003] calling  inic_init+0x0/0x16 @ 1
[   26.504006] bus: 'pci': add driver sata_inic162x
[   26.508063] initcall inic_init+0x0/0x16 returned 0 after 3906 usecs
[   26.516003] calling  sil24_init+0x0/0x16 @ 1
[   26.520005] bus: 'pci': add driver sata_sil24
[   26.524063] initcall sil24_init+0x0/0x16 returned 0 after 3906 usecs
[   26.528003] calling  adma_ata_init+0x0/0x16 @ 1
[   26.536005] bus: 'pci': add driver pdc_adma
[   26.540062] initcall adma_ata_init+0x0/0x16 returned 0 after 3906 usecs
[   26.544003] calling  pdc_sata_init+0x0/0x16 @ 1
[   26.548006] bus: 'pci': add driver sata_sx4
[   26.552062] initcall pdc_sata_init+0x0/0x16 returned 0 after 3906 usecs
[   26.560003] calling  piix_init+0x0/0x24 @ 1
[   26.564005] bus: 'pci': add driver ata_piix
[   26.568087] initcall piix_init+0x0/0x24 returned 0 after 3906 usecs
[   26.576004] calling  nv_init+0x0/0x16 @ 1
[   26.580006] bus: 'pci': add driver sata_nv
[   26.584065] initcall nv_init+0x0/0x16 returned 0 after 3906 usecs
[   26.588003] calling  pdc_ata_init+0x0/0x16 @ 1
[   26.596006] bus: 'pci': add driver sata_promise
[   26.600064] initcall pdc_ata_init+0x0/0x16 returned 0 after 3906 usecs
[   26.604003] calling  uli_init+0x0/0x16 @ 1
[   26.608006] bus: 'pci': add driver sata_uli
[   26.612063] initcall uli_init+0x0/0x16 returned 0 after 3906 usecs
[   26.620003] calling  svia_init+0x0/0x16 @ 1
[   26.624006] bus: 'pci': add driver sata_via
[   26.628063] initcall svia_init+0x0/0x16 returned 0 after 3906 usecs
[   26.636004] calling  amd_init+0x0/0x16 @ 1
[   26.640006] bus: 'pci': add driver pata_amd
[   26.644010] bus: 'pci': driver_probe_device: matched device 0000:00:06.0 with driver pata_amd
[   26.652002] bus: 'pci': really_probe: probing driver pata_amd with device 0000:00:06.0
[   26.660009] pata_amd 0000:00:06.0: version 0.4.1
[   26.664113] pata_amd 0000:00:06.0: setting latency timer to 64
[   26.668107] scsi0 : pata_amd
[   26.672327] device: 'host0': device_add
[   26.676014] PM: Adding info for No Bus:host0
[   26.680004] device: 'host0': device_add
[   26.684037] PM: Adding info for No Bus:host0
[   26.688076] scsi1 : pata_amd
[   26.692021] device: 'host1': device_add
[   26.696012] PM: Adding info for No Bus:host1
[   26.700004] device: 'host1': device_add
[   26.704048] PM: Adding info for No Bus:host1
[   26.708067] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[   26.716002] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[   26.724012] driver: '0000:00:06.0': driver_bound: bound to device 'pata_amd'
[   26.724107] calling  1_async_port_probe+0x0/0x9d @ 119
[   26.724269] calling  2_async_port_probe+0x0/0x9d @ 120
[   26.724271] async_waiting @ 120
[   26.744005] bus: 'pci': really_probe: bound device 0000:00:06.0 to driver pata_amd
[   26.752059] initcall amd_init+0x0/0x16 returned 0 after 109375 usecs
[   26.756003] calling  artop_init+0x0/0x16 @ 1
[   26.760007] bus: 'pci': add driver pata_artop
[   26.764063] initcall artop_init+0x0/0x16 returned 0 after 3906 usecs
[   26.772003] calling  atiixp_init+0x0/0x16 @ 1
[   26.776006] bus: 'pci': add driver pata_atiixp
[   26.780062] initcall atiixp_init+0x0/0x16 returned 0 after 3906 usecs
[   26.788004] calling  atp867x_init+0x0/0x16 @ 1
[   26.792006] bus: 'pci': add driver pata_atp867x
[   26.796072] initcall atp867x_init+0x0/0x16 returned 0 after 3906 usecs
[   26.804008] calling  cs5520_init+0x0/0x16 @ 1
[   26.808007] bus: 'pci': add driver pata_cs5520
[   26.812069] initcall cs5520_init+0x0/0x16 returned 0 after 3906 usecs
[   26.820003] calling  cs5535_init+0x0/0x16 @ 1
[   26.824006] bus: 'pci': add driver cs5535
[   26.828072] initcall cs5535_init+0x0/0x16 returned 0 after 3906 usecs
[   26.832004] calling  cy82c693_init+0x0/0x16 @ 1
[   26.836007] bus: 'pci': add driver pata_cypress
[   26.844063] initcall cy82c693_init+0x0/0x16 returned 0 after 7812 usecs
[   26.848003] calling  efar_init+0x0/0x16 @ 1
[   26.852006] bus: 'pci': add driver pata_efar
[   26.856061] initcall efar_init+0x0/0x16 returned 0 after 3906 usecs
[   26.864003] calling  hpt37x_init+0x0/0x16 @ 1
[   26.868006] bus: 'pci': add driver pata_hpt37x
[   26.872062] initcall hpt37x_init+0x0/0x16 returned 0 after 3906 usecs
[   26.880003] calling  hpt3x2n_init+0x0/0x16 @ 1
[   26.884006] bus: 'pci': add driver pata_hpt3x2n
[   26.888063] initcall hpt3x2n_init+0x0/0x16 returned 0 after 3906 usecs
[   26.896005] calling  it821x_init+0x0/0x16 @ 1
[   26.900021] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
[   26.900034] bus: 'pci': add driver pata_it821x
[   26.900097] initcall it821x_init+0x0/0x16 returned 0 after 0 usecs
[   26.900100] calling  jmicron_init+0x0/0x16 @ 1
[   26.900107] bus: 'pci': add driver pata_jmicron
[   26.900169] initcall jmicron_init+0x0/0x16 returned 0 after 0 usecs
[   26.900172] calling  marvell_init+0x0/0x16 @ 1
[   26.900179] bus: 'pci': add driver pata_marvell
[   26.900251] initcall marvell_init+0x0/0x16 returned 0 after 0 usecs
[   26.900254] calling  ninja32_init+0x0/0x16 @ 1
[   26.900262] bus: 'pci': add driver pata_ninja32
[   26.900324] initcall ninja32_init+0x0/0x16 returned 0 after 0 usecs
[   26.900328] calling  ns87415_init+0x0/0x16 @ 1
[   26.900335] bus: 'pci': add driver pata_ns87415
[   26.900397] initcall ns87415_init+0x0/0x16 returned 0 after 0 usecs
[   26.900400] calling  oldpiix_init+0x0/0x16 @ 1
[   26.900407] bus: 'pci': add driver pata_oldpiix
[   26.900469] initcall oldpiix_init+0x0/0x16 returned 0 after 0 usecs
[   26.900472] calling  optidma_init+0x0/0x16 @ 1
[   26.900480] bus: 'pci': add driver pata_optidma
[   26.900541] initcall optidma_init+0x0/0x16 returned 0 after 0 usecs
[   26.900545] calling  pdc2027x_init+0x0/0x16 @ 1
[   26.900552] bus: 'pci': add driver pata_pdc2027x
[   26.900614] initcall pdc2027x_init+0x0/0x16 returned 0 after 0 usecs
[   26.900618] calling  pdc202xx_init+0x0/0x16 @ 1
[   26.900625] bus: 'pci': add driver pata_pdc202xx_old
[   26.900687] initcall pdc202xx_init+0x0/0x16 returned 0 after 0 usecs
[   26.900691] calling  radisys_init+0x0/0x16 @ 1
[   26.900698] bus: 'pci': add driver pata_radisys
[   26.900769] initcall radisys_init+0x0/0x16 returned 0 after 0 usecs
[   26.900773] calling  sc1200_init+0x0/0x16 @ 1
[   26.900780] bus: 'pci': add driver sc1200
[   26.900842] initcall sc1200_init+0x0/0x16 returned 0 after 0 usecs
[   26.900845] calling  sch_init+0x0/0x16 @ 1
[   26.900853] bus: 'pci': add driver pata_sch
[   26.900914] initcall sch_init+0x0/0x16 returned 0 after 0 usecs
[   26.900918] calling  sis_init+0x0/0x16 @ 1
[   26.900925] bus: 'pci': add driver pata_sis
[   26.900987] initcall sis_init+0x0/0x16 returned 0 after 0 usecs
[   26.900991] calling  ata_tosh_init+0x0/0x16 @ 1
[   26.900998] bus: 'pci': add driver pata_piccolo
[   26.901061] initcall ata_tosh_init+0x0/0x16 returned 0 after 0 usecs
[   26.901064] calling  via_init+0x0/0x16 @ 1
[   26.901072] bus: 'pci': add driver pata_via
[   26.901134] initcall via_init+0x0/0x16 returned 0 after 0 usecs
[   26.901138] calling  sl82c105_init+0x0/0x16 @ 1
[   26.901145] bus: 'pci': add driver pata_sl82c105
[   26.901207] initcall sl82c105_init+0x0/0x16 returned 0 after 0 usecs
[   26.901211] calling  cmd640_init+0x0/0x16 @ 1
[   26.901219] bus: 'pci': add driver pata_cmd640
[   26.901290] initcall cmd640_init+0x0/0x16 returned 0 after 0 usecs
[   26.901294] calling  pata_platform_init+0x0/0xf @ 1
[   26.901299] bus: 'platform': add driver pata_platform
[   26.901356] initcall pata_platform_init+0x0/0xf returned 0 after 0 usecs
[   26.901359] calling  qdi_init+0x0/0x1c0 @ 1
[   26.901363] initcall qdi_init+0x0/0x1c0 returned -19 after 0 usecs
[   26.901367] calling  rz1000_init+0x0/0x16 @ 1
[   26.901375] bus: 'pci': add driver pata_rz1000
[   26.901438] initcall rz1000_init+0x0/0x16 returned 0 after 0 usecs
[   26.901441] calling  winbond_init+0x0/0x26d @ 1
[   26.901445] initcall winbond_init+0x0/0x26d returned -19 after 0 usecs
[   26.901449] calling  ata_generic_init+0x0/0x16 @ 1
[   26.901456] bus: 'pci': add driver ata_generic
[   26.901519] initcall ata_generic_init+0x0/0x16 returned 0 after 0 usecs
[   26.901523] calling  legacy_init+0x0/0x82a @ 1
[   26.901592] initcall legacy_init+0x0/0x82a returned -19 after 0 usecs
[   26.901595] calling  marvell_init+0x0/0x49 @ 1
[   26.901598] bus: 'mdio_bus': add driver Marvell 88E1101
[   26.901662] bus: 'mdio_bus': add driver Marvell 88E1112
[   26.901751] bus: 'mdio_bus': add driver Marvell 88E1111
[   26.901808] bus: 'mdio_bus': add driver Marvell 88E1118
[   26.901864] bus: 'mdio_bus': add driver Marvell 88E1121R
[   26.901919] bus: 'mdio_bus': add driver Marvell 88E1145
[   26.901981] bus: 'mdio_bus': add driver Marvell 88E1240
[   26.902035] initcall marvell_init+0x0/0x49 returned 0 after 0 usecs
[   26.902039] calling  lxt_init+0x0/0x33 @ 1
[   26.902041] bus: 'mdio_bus': add driver LXT970
[   26.902094] bus: 'mdio_bus': add driver LXT971
[   26.902148] initcall lxt_init+0x0/0x33 returned 0 after 0 usecs
[   26.902151] calling  qs6612_init+0x0/0xf @ 1
[   26.902153] bus: 'mdio_bus': add driver QS6612
[   26.902207] initcall qs6612_init+0x0/0xf returned 0 after 0 usecs
[   26.902211] calling  smsc_init+0x0/0x81 @ 1
[   26.902213] bus: 'mdio_bus': add driver SMSC LAN83C185
[   26.902266] bus: 'mdio_bus': add driver SMSC LAN8187
[   26.902318] bus: 'mdio_bus': add driver SMSC LAN8700
[   26.902370] bus: 'mdio_bus': add driver SMSC LAN911x Internal PHY
[   26.902423] bus: 'mdio_bus': add driver SMSC LAN8710/LAN8720
[   26.902478] initcall smsc_init+0x0/0x81 returned 0 after 0 usecs
[   26.902481] calling  vsc82xx_init+0x0/0x33 @ 1
[   26.902484] bus: 'mdio_bus': add driver Vitesse VSC8244
[   26.902536] bus: 'mdio_bus': add driver Vitesse VSC8221
[   26.902600] initcall vsc82xx_init+0x0/0x33 returned 0 after 0 usecs
[   26.902603] calling  ip175c_init+0x0/0xf @ 1
[   26.902606] bus: 'mdio_bus': add driver ICPlus IP175C
[   26.902660] initcall ip175c_init+0x0/0xf returned 0 after 0 usecs
[   26.902663] calling  et1011c_init+0x0/0xf @ 1
[   26.902666] bus: 'mdio_bus': add driver ET1011C
[   26.902720] initcall et1011c_init+0x0/0xf returned 0 after 0 usecs
[   26.902724] calling  fixed_mdio_bus_init+0x0/0xc7 @ 1
[   26.902731] Registering platform device 'Fixed MDIO bus.0'. Parent at platform
[   26.902734] device: 'Fixed MDIO bus.0': device_add
[   26.902741] bus: 'platform': add device Fixed MDIO bus.0
[   26.902755] PM: Adding info for platform:Fixed MDIO bus.0
[   26.902831] device: '0': device_add
[   26.902848] PM: Adding info for No Bus:0
[   26.902899] Fixed MDIO Bus: probed
[   26.902903] initcall fixed_mdio_bus_init+0x0/0xc7 returned 0 after 0 usecs
[   26.902907] calling  ksphy_init+0x0/0x4d @ 1
[   26.902909] bus: 'mdio_bus': add driver Micrel KS8001
[   26.902963] bus: 'mdio_bus': add driver Micrel VSC8201
[   26.903016] bus: 'mdio_bus': add driver Micrel KSZ9021 Gigabit PHY
[   26.903072] initcall ksphy_init+0x0/0x4d returned 0 after 0 usecs
[   26.903075] calling  e1000_init_module+0x0/0x6e @ 1
[   26.903078] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
[   26.903080] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   26.903088] bus: 'pci': add driver e1000
[   26.903162] initcall e1000_init_module+0x0/0x6e returned 0 after 0 usecs
[   26.903165] calling  e1000_init_module+0x0/0x2f @ 1
[   26.903167] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4
[   26.903169] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[   26.903177] bus: 'pci': add driver e1000e
[   26.903180] initcall e1000_init_module+0x0/0x2f returned 0 after 0 usecs
[   26.903180] calling  igbvf_init_module+0x0/0x53 @ 1
[   26.903180] Intel(R) Virtual Function Network Driver - version 1.0.0-k0
[   26.903180] Copyright (c) 2009 Intel Corporation.
[   26.903180] bus: 'pci': add driver igbvf
[   26.903180] initcall igbvf_init_module+0x0/0x53 returned 0 after 0 usecs
[   26.903180] calling  ixgbevf_init_module+0x0/0x39 @ 1
[   26.903180] ixgbevf: Intel(R) 82599 Virtual Function - version 1.0.0-k0
[   26.903180] Copyright (c) 2009 Intel Corporation.
[   26.903180] bus: 'pci': add driver ixgbevf
[   26.903180] initcall ixgbevf_init_module+0x0/0x39 returned 0 after 0 usecs
[   26.903180] calling  ixgb_init_module+0x0/0x39 @ 1
[   26.903180] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[   26.903180] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[   26.903180] bus: 'pci': add driver ixgb
[   26.903180] initcall ixgb_init_module+0x0/0x39 returned 0 after 0 usecs
[   26.903180] calling  ipg_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver Sundance Technology IPG Triple-Speed Ethernet
[   26.903180] initcall ipg_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  t1_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver cxgb
[   26.903180] initcall t1_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  cxgb3_init_module+0x0/0x1b @ 1
[   26.903180] bus: 'pci': add driver cxgb3
[   26.903180] initcall cxgb3_init_module+0x0/0x1b returned 0 after 0 usecs
[   26.903180] calling  cxgb4_init_module+0x0/0x4c @ 1
[   26.903180] bus: 'pci': add driver cxgb4
[   26.903180] initcall cxgb4_init_module+0x0/0x4c returned 0 after 0 usecs
[   26.903180] calling  atl1_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver atl1
[   26.903180] initcall atl1_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  atl2_init_module+0x0/0x39 @ 1
[   26.903180] Atheros(R) L2 Ethernet Driver - version 2.2.3
[   26.903180] Copyright (c) 2007 Atheros Corporation.
[   26.903180] bus: 'pci': add driver atl2
[   26.903180] initcall atl2_init_module+0x0/0x39 returned 0 after 0 usecs
[   26.903180] calling  atl1e_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver ATL1E
[   26.903180] initcall atl1e_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  bdx_module_init+0x0/0x6d @ 1
[   26.903180] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[   26.903180] tehuti: Options: hw_csum 
[   26.903180] bus: 'pci': add driver tehuti
[   26.903180] initcall bdx_module_init+0x0/0x6d returned 0 after 0 usecs
[   26.903180] calling  enic_init_module+0x0/0x2a @ 1
[   26.903180] enic: Cisco VIC Ethernet NIC Driver, ver 1.3.1.1-pp
[   26.903180] bus: 'pci': add driver enic
[   26.903180] initcall enic_init_module+0x0/0x2a returned 0 after 0 usecs
[   26.903180] calling  vmxnet3_init_module+0x0/0x2a @ 1
[   26.903180] VMware vmxnet3 virtual NIC driver - version 1.0.5.0-k-NAPI
[   26.903180] bus: 'pci': add driver vmxnet3
[   26.903180] initcall vmxnet3_init_module+0x0/0x2a returned 0 after 0 usecs
[   26.903180] calling  plip_init+0x0/0x52 @ 1
[   26.903180] initcall plip_init+0x0/0x52 returned 0 after 0 usecs
[   26.903180] calling  rr_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver rrunner
[   26.903180] initcall rr_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  happy_meal_probe+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver hme
[   26.903180] initcall happy_meal_probe+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  gem_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver gem
[   26.903180] initcall gem_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  cas_init+0x0/0x36 @ 1
[   26.903180] bus: 'pci': add driver cassini
[   26.903180] initcall cas_init+0x0/0x36 returned 0 after 0 usecs
[   26.903180] calling  ne2k_pci_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver ne2k-pci
[   26.903180] initcall ne2k_pci_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  pcnet32_init_module+0x0/0x102 @ 1
[   26.903180] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[   26.903180] bus: 'pci': add driver pcnet32
[   26.903180] initcall pcnet32_init_module+0x0/0x102 returned 0 after 0 usecs
[   26.903180] calling  e100_init_module+0x0/0x4d @ 1
[   26.903180] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   26.903180] e100: Copyright(c) 1999-2006 Intel Corporation
[   26.903180] bus: 'pci': add driver e100
[   26.903180] initcall e100_init_module+0x0/0x4d returned 0 after 0 usecs
[   26.903180] calling  epic_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver epic100
[   26.903180] initcall epic_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  sis900_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver sis900
[   26.903180] initcall sis900_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  r6040_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver r6040
[   26.903180] initcall r6040_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  yellowfin_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver yellowfin
[   26.903180] initcall yellowfin_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  acenic_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver acenic
[   26.903180] initcall acenic_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  natsemi_init_mod+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver natsemi
[   26.903180] initcall natsemi_init_mod+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  ns83820_init+0x0/0x20 @ 1
[   26.903180] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[   26.903180] bus: 'pci': add driver ns83820
[   26.903180] initcall ns83820_init+0x0/0x20 returned 0 after 0 usecs
[   26.903180] calling  tg3_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver tg3
[   26.903180] initcall tg3_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  bnx2_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver bnx2
[   26.903180] initcall bnx2_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  cnic_init+0x0/0x32 @ 1
[   26.903180] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
[   26.903180] initcall cnic_init+0x0/0x32 returned 0 after 0 usecs
[   26.903180] calling  bnx2x_init+0x0/0x7a @ 1
[   26.903180] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.52.53-1 (2010/18/04)
[   26.903180] bus: 'pci': add driver bnx2x
[   26.903180] initcall bnx2x_init+0x0/0x7a returned 0 after 0 usecs
[   26.903180] calling  skge_init_module+0x0/0x49 @ 1
[   26.903180] bus: 'pci': add driver skge
[   26.903180] initcall skge_init_module+0x0/0x49 returned 0 after 0 usecs
[   26.903180] calling  sky2_init_module+0x0/0x20 @ 1
[   26.903180] sky2: driver version 1.28
[   26.903180] bus: 'pci': add driver sky2
[   26.903180] initcall sky2_init_module+0x0/0x20 returned 0 after 0 usecs
[   26.903180] calling  ks8842_init+0x0/0xf @ 1
[   26.903180] bus: 'platform': add driver ks8842
[   26.903180] initcall ks8842_init+0x0/0xf returned 0 after 0 usecs
[   26.903180] calling  rhine_init+0x0/0x54 @ 1
[   26.903180] bus: 'pci': add driver via-rhine
[   26.903180] initcall rhine_init+0x0/0x54 returned 0 after 0 usecs
[   26.903180] calling  velocity_init_module+0x0/0x34 @ 1
[   26.903180] bus: 'pci': add driver via-velocity
[   26.903180] initcall velocity_init_module+0x0/0x34 returned 0 after 0 usecs
[   26.903180] calling  sundance_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver sundance
[   26.903180] initcall sundance_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  hamachi_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver hamachi
[   26.903180] initcall hamachi_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  net_olddevs_init+0x0/0x82 @ 1
[   26.903180] cs89x0:cs89x0_probe(0x0)
[   26.903180] PP_addr at 300[a]: 0xffff
[   26.903180] eth0: incorrect signature at 300[c]: 0xffff!=0x630E
[   26.903180] cs89x0: request_region(0x320, 0x10) failed
[   26.903180] PP_addr at 340[a]: 0xffff
[   26.903180] eth0: incorrect signature at 340[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 360[a]: 0xffff
[   26.903180] eth0: incorrect signature at 360[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 200[a]: 0xffff
[   26.903180] eth0: incorrect signature at 200[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 220[a]: 0xffff
[   26.903180] eth0: incorrect signature at 220[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 240[a]: 0xffff
[   26.903180] eth0: incorrect signature at 240[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 260[a]: 0xffff
[   26.903180] eth0: incorrect signature at 260[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 280[a]: 0xffff
[   26.903180] eth0: incorrect signature at 280[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 2a0[a]: 0xffff
[   26.903180] eth0: incorrect signature at 2a0[c]: 0xffff!=0x630E
[   26.903184] PP_addr at 2c0[a]: 0xffff
[   26.903190] eth0: incorrect signature at 2c0[c]: 0xffff!=0x630E
[   26.903197] PP_addr at 2e0[a]: 0xffff
[   26.903203] eth0: incorrect signature at 2e0[c]: 0xffff!=0x630E
[   26.903213] cs89x0: no cs8900 or cs8920 detected.  Be sure to disable PnP with SETUP
[   26.903446] D-Link DE-620 pocket adapter not identified in the printer port
[   26.903504] initcall net_olddevs_init+0x0/0x82 returned 0 after 0 usecs
[   26.903507] calling  b44_init+0x0/0x55 @ 1
[   26.903517] bus: 'pci': add driver b44
[   26.903581] bus: 'ssb': add driver b44
[   26.903634] initcall b44_init+0x0/0x55 returned 0 after 0 usecs
[   26.903637] calling  init_nic+0x0/0x16 @ 1
[   26.903646] bus: 'pci': add driver forcedeth
[   26.903658] bus: 'pci': driver_probe_device: matched device 0000:00:0a.0 with driver forcedeth
[   26.903661] bus: 'pci': really_probe: probing driver forcedeth with device 0000:00:0a.0
[   26.903670] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   26.903731] IOAPIC[0]: Set routing entry (2-11 -> 0x49 -> IRQ 37 Mode:1 Active:1)
[   26.903738] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 37
[   26.903750] forcedeth 0000:00:0a.0: setting latency timer to 64
[   26.903842] nv_probe: set workaround bit for reversed mac addr
[   26.904004] ata1.00: 488397168 sectors, multi 1: LBA48 
[   26.908022] ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[   26.936159] ata1.00: configured for UDMA/100
[   26.940007] async_waiting @ 119
[   26.943144] async_continuing @ 119 after 0 usec
[   26.944235] scsi 0:0:0:0: Direct-Access     ATA      HDS722525VLAT80  V36O PQ: 0 ANSI: 5
[   26.948009] device: 'target0:0:0': device_add
[   26.952012] PM: Adding info for No Bus:target0:0:0
[   26.956007] device: '0:0:0:0': device_add
[   26.960039] bus: 'scsi': add device 0:0:0:0
[   26.964013] PM: Adding info for scsi:0:0:0:0
[   26.968060] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver st
[   26.972002] bus: 'scsi': really_probe: probing driver st with device 0:0:0:0
[   26.976017] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver osst
[   26.980002] bus: 'scsi': really_probe: probing driver osst with device 0:0:0:0
[   26.984014] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd
[   26.988003] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
[   26.992038] device: '0:0:0:0': device_add
[   26.996027] PM: Adding info for No Bus:0:0:0:0
[   27.000056] driver: '0:0:0:0': driver_bound: bound to device 'sd'
[   27.000059] calling  3_sd_probe_async+0x0/0x1be @ 122
[   27.000196] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[   27.000370] sd 0:0:0:0: [sda] Write Protect is off
[   27.000373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   27.000444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   27.000455] device: 'sda': device_add
[   27.000498] PM: Adding info for No Bus:sda
[   27.000498]  sda:
[   27.000498] BUG: spinlock bad magic on CPU#1, async/2/122
[   27.000498]  lock: 7f8d6c3c, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[   27.000498] Pid: 122, comm: async/2 Not tainted 2.6.35-rc2-00131-g7908a9e #8184
[   27.000498] Call Trace:
[   27.000498]  [<41ba1a73>] ? printk+0x20/0x24
[   27.000498]  [<4134b647>] spin_bug+0x7c/0x87
[   27.000498]  [<4134b6e3>] do_raw_spin_lock+0x1e/0x123
[   27.000498]  [<41ba3ffa>] ? _raw_spin_lock_irqsave+0x12/0x20
[   27.000498]  [<41ba4002>] _raw_spin_lock_irqsave+0x1a/0x20
[   27.000498]  [<4133461b>] blkiocg_update_io_add_stats+0x25/0xfb
[   27.000498]  [<41335c5a>] ? cfq_prio_tree_add+0xb1/0xc1
[   27.000498]  [<41337a8c>] cfq_insert_request+0x8c/0x42b
[   27.000498]  [<41ba3fa1>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   27.000498]  [<41ba3fa1>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   27.000498]  [<41329125>] elv_insert+0x107/0x1a0
[   27.000498]  [<41329254>] __elv_add_request+0x96/0x9d
[   27.000498]  [<4132ba39>] ? drive_stat_acct+0x9d/0xc6
[   27.000498]  [<4132dc11>] __make_request+0x335/0x376
[   27.000501]  [<4132c5d3>] generic_make_request+0x336/0x39d
[   27.000506]  [<410ad4ca>] ? kmem_cache_alloc+0xa1/0x105
[   27.000510]  [<4108935d>] ? mempool_alloc_slab+0xe/0x10
[   27.000513]  [<4108935d>] ? mempool_alloc_slab+0xe/0x10
[   27.000517]  [<4108935d>] ? mempool_alloc_slab+0xe/0x10
[   27.000520]  [<4108941f>] ? mempool_alloc+0x57/0xe2
[   27.000524]  [<4132c6b1>] submit_bio+0x77/0x8f
[   27.000528]  [<410d2d48>] ? bio_alloc_bioset+0x37/0x94
[   27.000531]  [<410cec1c>] submit_bh+0xc3/0xe2
[   27.000535]  [<410d1500>] block_read_full_page+0x249/0x259
[   27.000538]  [<410d3287>] ? blkdev_get_block+0x0/0xc6
[   27.000542]  [<41087cd2>] ? add_to_page_cache_locked+0x94/0xb5
[   27.000545]  [<410d3e1e>] blkdev_readpage+0xf/0x11
[   27.000549]  [<410888fb>] do_read_cache_page+0x7d/0x11a
[   27.000552]  [<410d3e0f>] ? blkdev_readpage+0x0/0x11
[   27.000555]  [<410889cc>] read_cache_page_async+0x16/0x1b
[   27.000559]  [<410889dc>] read_cache_page+0xb/0x12
[   27.000563]  [<410e8171>] read_dev_sector+0x2a/0x63
[   27.000566]  [<410e9378>] adfspart_check_ICS+0x2e/0x166
[   27.000569]  [<41ba1a73>] ? printk+0x20/0x24
[   27.000573]  [<410e8db3>] rescan_partitions+0x196/0x3e4
[   27.000576]  [<41ba2af3>] ? __mutex_unlock_slowpath+0x98/0x9f
[   27.000580]  [<410e934a>] ? adfspart_check_ICS+0x0/0x166
[   27.000583]  [<410d4303>] __blkdev_get+0x1e7/0x292
[   27.000587]  [<4133a0d9>] ? kobject_put+0x14/0x16
[   27.000591]  [<410d43b8>] blkdev_get+0xa/0xc
[   27.000594]  [<410e828b>] register_disk+0x94/0xe5
[   27.000597]  [<41332572>] ? blk_register_region+0x1b/0x20
[   27.000601]  [<413326c1>] add_disk+0x57/0x95
[   27.000604]  [<41331e72>] ? exact_match+0x0/0x8
[   27.000607]  [<413321eb>] ? exact_lock+0x0/0x11
[   27.000610]  [<416436e0>] sd_probe_async+0x108/0x1be
[   27.000615]  [<41048489>] async_thread+0xf5/0x1e6
[   27.000619]  [<4102c9d7>] ? default_wake_function+0x0/0xd
[   27.000623]  [<41048394>] ? async_thread+0x0/0x1e6
[   27.000628]  [<4104304b>] kthread+0x5f/0x64
[   27.000631]  [<41042fec>] ? kthread+0x0/0x64
[   27.000635]  [<41002ce6>] kernel_thread_helper+0x6/0x10
[   27.000698]  sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[   27.000698] device: 'sda1': device_add
[   27.000698] PM: Adding info for No Bus:sda1
[   27.000698] device: 'sda2': device_add
[   27.000698] PM: Adding info for No Bus:sda2
[   27.000698] device: 'sda3': device_add
[   27.000698] PM: Adding info for No Bus:sda3
[   27.000698] device: 'sda5': device_add
[   27.000698] PM: Adding info for No Bus:sda5
[   27.000698] device: 'sda6': device_add
[   27.000698] PM: Adding info for No Bus:sda6
[   27.000698] device: 'sda7': device_add
[   27.000698] PM: Adding info for No Bus:sda7
[   27.000698] device: 'sda8': device_add
[   27.000698] PM: Adding info for No Bus:sda8
[   27.000698] device: 'sda9': device_add
[   27.000698] PM: Adding info for No Bus:sda9
[   27.000698] device: 'sda10': device_add
[   27.000698] PM: Adding info for No Bus:sda10
[   27.004004] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
[   27.003997] device: '8:0': device_add
[   27.003997] PM: Adding info for No Bus:8:0
[   27.004046] sd 0:0:0:0: [sda] Attached SCSI disk
[   27.004051] initcall 3_sd_probe_async+0x0/0x1be returned 0 after 3906 usecs
[   27.008005] device: '0:0:0:0': device_add
[   27.012030] PM: Adding info for No Bus:0:0:0:0
[   27.016071] initcall 1_async_port_probe+0x0/0x9d returned 0 after 285156 usecs
[   27.020005] async_continuing @ 120 after 289062 usec
[   27.192221] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
[   27.196021] ata2: nv_mode_filter: 0x1f39f&0x73ff->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
[   27.220156] ata2.01: configured for UDMA/33
[   27.224057] async_waiting @ 120
[   27.228003] async_continuing @ 120 after 0 usec
[   27.232047] scsi 1:0:1:0: CD-ROM            DVDRW    IDE 16X          A079 PQ: 0 ANSI: 5
[   27.240017] device: 'target1:0:1': device_add
[   27.244011] PM: Adding info for No Bus:target1:0:1
[   27.248008] device: '1:0:1:0': device_add
[   27.252039] bus: 'scsi': add device 1:0:1:0
[   27.256013] PM: Adding info for scsi:1:0:1:0
[   27.260059] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver st
[   27.268002] bus: 'scsi': really_probe: probing driver st with device 1:0:1:0
[   27.276017] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver osst
[   27.284002] bus: 'scsi': really_probe: probing driver osst with device 1:0:1:0
[   27.292015] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sd
[   27.300002] bus: 'scsi': really_probe: probing driver sd with device 1:0:1:0
[   27.304015] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sr
[   27.312002] bus: 'scsi': really_probe: probing driver sr with device 1:0:1:0
[   27.324025] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[   27.332005] Uniform CD-ROM driver Revision: 3.20
[   27.336007] device: 'sr0': device_add
[   27.340062] PM: Adding info for No Bus:sr0
[   27.344124] device: '11:0': device_add
[   27.348025] PM: Adding info for No Bus:11:0
[   27.352064] sr 1:0:1:0: Attached scsi CD-ROM sr0
[   27.356002] driver: '1:0:1:0': driver_bound: bound to device 'sr'
[   27.360003] bus: 'scsi': really_probe: bound device 1:0:1:0 to driver sr
[   27.368004] device: '1:0:1:0': device_add
[   27.372018] PM: Adding info for No Bus:1:0:1:0
[   27.376070] initcall 2_async_port_probe+0x0/0x9d returned 0 after 636718 usecs
[   27.420191] device: 'eth0': device_add
[   27.424031] PM: Adding info for No Bus:eth0
[   27.428145] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
[   27.436004] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[   27.440002] driver: '0000:00:0a.0': driver_bound: bound to device 'forcedeth'
[   27.448003] bus: 'pci': really_probe: bound device 0000:00:0a.0 to driver forcedeth
[   27.456062] initcall init_nic+0x0/0x16 returned 0 after 542968 usecs
[   27.464003] calling  qlcnic_init_module+0x0/0x39 @ 1
[   27.468002] QLogic Converged Ethernet Driver v5.0.2
[   27.472016] bus: 'pci': add driver qlcnic
[   27.476086] initcall qlcnic_init_module+0x0/0x39 returned 0 after 7812 usecs
[   27.484003] calling  qlge_init_module+0x0/0x16 @ 1
[   27.488010] bus: 'pci': add driver qlge
[   27.492062] initcall qlge_init_module+0x0/0x16 returned 0 after 3906 usecs
[   27.500003] calling  ppp_init+0x0/0xc3 @ 1
[   27.504002] PPP generic driver version 2.4.2
[   27.508030] device class 'ppp': registering
[   27.512062] device: 'ppp': device_add
[   27.516194] PM: Adding info for No Bus:ppp
[   27.520055] initcall ppp_init+0x0/0xc3 returned 0 after 15625 usecs
[   27.524003] calling  ppp_async_init+0x0/0x2d @ 1
[   27.532004] initcall ppp_async_init+0x0/0x2d returned 0 after 0 usecs
[   27.536003] calling  deflate_init+0x0/0x30 @ 1
[   27.540003] PPP Deflate Compression module registered
[   27.548004] initcall deflate_init+0x0/0x30 returned 0 after 7812 usecs
[   27.552003] calling  bsdcomp_init+0x0/0x26 @ 1
[   27.556002] PPP BSD Compression module registered
[   27.564003] initcall bsdcomp_init+0x0/0x26 returned 0 after 7812 usecs
[   27.568003] calling  pppox_init+0x0/0xf @ 1
[   27.572002] NET: Registered protocol family 24
[   27.576003] initcall pppox_init+0x0/0xf returned 0 after 3906 usecs
[   27.584003] calling  pppoe_init+0x0/0x71 @ 1
[   27.588018] initcall pppoe_init+0x0/0x71 returned 0 after 0 usecs
[   27.592003] calling  slip_init+0x0/0x99 @ 1
[   27.600002] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[   27.608002] CSLIP: code copyright 1989 Regents of the University of California.
[   27.616007] initcall slip_init+0x0/0x99 returned 0 after 15625 usecs
[   27.620003] calling  dummy_init_module+0x0/0x96 @ 1
[   27.628028] device: 'dummy0': device_add
[   27.632081] PM: Adding info for No Bus:dummy0
[   27.636135] initcall dummy_init_module+0x0/0x96 returned 0 after 7812 usecs
[   27.640003] calling  macvlan_init_module+0x0/0x45 @ 1
[   27.648005] initcall macvlan_init_module+0x0/0x45 returned 0 after 0 usecs
[   27.652004] calling  macvtap_init+0x0/0xa4 @ 1
[   27.660006] device class 'macvtap': registering
[   27.664058] initcall macvtap_init+0x0/0xa4 returned 0 after 3906 usecs
[   27.668003] calling  rtl8139_init_module+0x0/0x16 @ 1
[   27.676013] bus: 'pci': add driver 8139too
[   27.680022] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139too
[   27.688002] bus: 'pci': really_probe: probing driver 8139too with device 0000:05:07.0
[   27.696008] 8139too: 8139too Fast Ethernet driver 0.9.28
[   27.700047] 8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 37
[   27.708252] device: 'eth1': device_add
[   27.712085] PM: Adding info for No Bus:eth1
[   27.716130] 8139too 0000:05:07.0: eth1: RealTek RTL8139 at 0x80dfc000, 00:c0:df:03:68:5d, IRQ 37
[   27.724003] driver: '0000:05:07.0': driver_bound: bound to device '8139too'
[   27.732003] bus: 'pci': really_probe: bound device 0000:05:07.0 to driver 8139too
[   27.740055] initcall rtl8139_init_module+0x0/0x16 returned 0 after 62500 usecs
[   27.744003] calling  atp_init_module+0x0/0x81 @ 1
[   27.752002] atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@scyld.com>
[   27.756034] initcall atp_init_module+0x0/0x81 returned -19 after 3906 usecs
[   27.764005] calling  sc92031_init+0x0/0x16 @ 1
[   27.768011] bus: 'pci': add driver sc92031
[   27.772065] initcall sc92031_init+0x0/0x16 returned 0 after 3906 usecs
[   27.780003] calling  eql_init_module+0x0/0x50 @ 1
[   27.784002] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[   27.792019] device: 'eql': device_add
[   27.796120] PM: Adding info for No Bus:eql
[   27.800130] initcall eql_init_module+0x0/0x50 returned 0 after 15625 usecs
[   27.808009] calling  tun_init+0x0/0x79 @ 1
[   27.812003] tun: Universal TUN/TAP device driver, 1.6
[   27.816002] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   27.824022] device: 'tun': device_add
[   27.828201] PM: Adding info for No Bus:tun
[   27.832064] initcall tun_init+0x0/0x79 returned 0 after 19531 usecs
[   27.836003] calling  veth_init+0x0/0xf @ 1
[   27.840005] initcall veth_init+0x0/0xf returned 0 after 0 usecs
[   27.844003] calling  rio_init+0x0/0x16 @ 1
[   27.848017] bus: 'pci': add driver dl2k
[   27.852085] initcall rio_init+0x0/0x16 returned 0 after 3906 usecs
[   27.856003] calling  rtl8169_init_module+0x0/0x16 @ 1
[   27.860010] bus: 'pci': add driver r8169
[   27.864064] initcall rtl8169_init_module+0x0/0x16 returned 0 after 3906 usecs
[   27.868003] calling  amd8111e_init+0x0/0x16 @ 1
[   27.872010] bus: 'pci': add driver amd8111e
[   27.876063] initcall amd8111e_init+0x0/0x16 returned 0 after 3906 usecs
[   27.880003] calling  myri10ge_init_module+0x0/0x5b @ 1
[   27.884002] myri10ge: Version 1.5.2-1.459
[   27.888013] bus: 'pci': add driver myri10ge
[   27.892063] initcall myri10ge_init_module+0x0/0x5b returned 0 after 7812 usecs
[   27.896003] calling  mlx4_init+0x0/0x93 @ 1
[   27.900059] bus: 'pci': add driver mlx4_core
[   27.904071] initcall mlx4_init+0x0/0x93 returned 0 after 3906 usecs
[   27.912003] calling  mlx4_en_init+0x0/0xf @ 1
[   27.916004] initcall mlx4_en_init+0x0/0xf returned 0 after 0 usecs
[   27.924003] calling  ethoc_init+0x0/0xf @ 1
[   27.928005] bus: 'platform': add driver ethoc
[   27.932060] initcall ethoc_init+0x0/0xf returned 0 after 3906 usecs
[   27.936003] calling  dnet_init+0x0/0xf @ 1
[   27.940003] bus: 'platform': add driver dnet
[   27.944055] initcall dnet_init+0x0/0xf returned 0 after 7812 usecs
[   27.952003] calling  olympic_pci_init+0x0/0x16 @ 1
[   27.956011] bus: 'pci': add driver olympic
[   27.960061] initcall olympic_pci_init+0x0/0x16 returned 0 after 3906 usecs
[   27.968003] calling  streamer_init_module+0x0/0x16 @ 1
[   27.972010] bus: 'pci': add driver lanstreamer
[   27.976061] initcall streamer_init_module+0x0/0x16 returned 0 after 3906 usecs
[   27.984003] calling  catc_init+0x0/0x2d @ 1
[   27.988003] bus: 'usb': add driver catc
[   27.992056] usbcore: registered new interface driver catc
[   28.000002] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[   28.004006] initcall catc_init+0x0/0x2d returned 0 after 15625 usecs
[   28.004013] async/2 used greatest stack depth: 1884 bytes left
[   28.016003] calling  kaweth_init+0x0/0x16 @ 1
[   28.020003] bus: 'usb': add driver kaweth
[   28.024067] usbcore: registered new interface driver kaweth
[   28.032004] initcall kaweth_init+0x0/0x16 returned 0 after 11718 usecs
[   28.036003] calling  usb_rtl8150_init+0x0/0x20 @ 1
[   28.040002] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[   28.048002] bus: 'usb': add driver rtl8150
[   28.052055] usbcore: registered new interface driver rtl8150
[   28.060004] initcall usb_rtl8150_init+0x0/0x20 returned 0 after 19531 usecs
[   28.064003] calling  asix_init+0x0/0x16 @ 1
[   28.068002] bus: 'usb': add driver asix
[   28.072065] usbcore: registered new interface driver asix
[   28.080004] initcall asix_init+0x0/0x16 returned 0 after 11718 usecs
[   28.084003] calling  cdc_init+0x0/0x16 @ 1
[   28.088002] bus: 'usb': add driver cdc_ether
[   28.092055] usbcore: registered new interface driver cdc_ether
[   28.100004] initcall cdc_init+0x0/0x16 returned 0 after 11718 usecs
[   28.104003] calling  dm9601_init+0x0/0x16 @ 1
[   28.112002] bus: 'usb': add driver dm9601
[   28.116055] usbcore: registered new interface driver dm9601
[   28.120004] initcall dm9601_init+0x0/0x16 returned 0 after 7812 usecs
[   28.128003] calling  smsc75xx_init+0x0/0x16 @ 1
[   28.132002] bus: 'usb': add driver smsc75xx
[   28.136064] usbcore: registered new interface driver smsc75xx
[   28.140004] initcall smsc75xx_init+0x0/0x16 returned 0 after 7812 usecs
[   28.148003] calling  smsc95xx_init+0x0/0x16 @ 1
[   28.152002] bus: 'usb': add driver smsc95xx
[   28.156054] usbcore: registered new interface driver smsc95xx
[   28.160004] initcall smsc95xx_init+0x0/0x16 returned 0 after 7812 usecs
[   28.168003] calling  usbnet_init+0x0/0x16 @ 1
[   28.172002] bus: 'usb': add driver gl620a
[   28.176064] usbcore: registered new interface driver gl620a
[   28.184004] initcall usbnet_init+0x0/0x16 returned 0 after 11718 usecs
[   28.188003] calling  net1080_init+0x0/0x16 @ 1
[   28.192002] bus: 'usb': add driver net1080
[   28.196054] usbcore: registered new interface driver net1080
[   28.204004] initcall net1080_init+0x0/0x16 returned 0 after 11718 usecs
[   28.208003] calling  cdc_subset_init+0x0/0x16 @ 1
[   28.216002] bus: 'usb': add driver cdc_subset
[   28.220054] usbcore: registered new interface driver cdc_subset
[   28.224004] initcall cdc_subset_init+0x0/0x16 returned 0 after 7812 usecs
[   28.232003] calling  mcs7830_init+0x0/0x16 @ 1
[   28.236002] bus: 'usb': add driver MOSCHIP usb-ethernet driver
[   28.244056] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   28.248003] initcall mcs7830_init+0x0/0x16 returned 0 after 11718 usecs
[   28.256003] calling  usbnet_init+0x0/0x24 @ 1
[   28.260007] initcall usbnet_init+0x0/0x24 returned 0 after 0 usecs
[   28.268003] calling  int51x1_init+0x0/0x16 @ 1
[   28.272002] bus: 'usb': add driver int51x1
[   28.276056] usbcore: registered new interface driver int51x1
[   28.280004] initcall int51x1_init+0x0/0x16 returned 0 after 7812 usecs
[   28.288003] calling  usbpn_init+0x0/0x16 @ 1
[   28.292002] bus: 'usb': add driver cdc_phonet
[   28.296054] usbcore: registered new interface driver cdc_phonet
[   28.300003] initcall usbpn_init+0x0/0x16 returned 0 after 7812 usecs
[   28.308003] calling  ipheth_init+0x0/0x2f @ 1
[   28.312002] bus: 'usb': add driver ipheth
[   28.316054] usbcore: registered new interface driver ipheth
[   28.324004] initcall ipheth_init+0x0/0x2f returned 0 after 11718 usecs
[   28.328003] calling  airo_init_module+0x0/0xce @ 1
[   28.332012] airo(): Probing for PCI adapters
[   28.336012] bus: 'pci': add driver airo
[   28.340071] airo(): Finished probing for PCI adapters
[   28.348004] initcall airo_init_module+0x0/0xce returned 0 after 15625 usecs
[   28.352003] calling  prism54_module_init+0x0/0x2a @ 1
[   28.360002] Loaded prism54 driver, version 1.2
[   28.364011] bus: 'pci': add driver prism54
[   28.368063] initcall prism54_module_init+0x0/0x2a returned 0 after 7812 usecs
[   28.376003] calling  init_netconsole+0x0/0x1cb @ 1
[   28.380005] console [netcon0] enabled
[   28.384005] netconsole: network logging started
[   28.388004] initcall init_netconsole+0x0/0x1cb returned 0 after 7812 usecs
[   28.396003] calling  efx_init_module+0x0/0xb3 @ 1
[   28.400001] Solarflare NET driver v3.0
[   28.404077] bus: 'pci': add driver sfc
[   28.408085] initcall efx_init_module+0x0/0xb3 returned 0 after 7812 usecs
[   28.412004] calling  zatm_init_module+0x0/0x16 @ 1
[   28.416012] bus: 'pci': add driver zatm
[   28.420065] initcall zatm_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.424028] calling  uPD98402_module_init+0x0/0x7 @ 1
[   28.428004] initcall uPD98402_module_init+0x0/0x7 returned 0 after 0 usecs
[   28.432003] calling  nicstar_init+0x0/0x5b @ 1
[   28.436011] bus: 'pci': add driver nicstar
[   28.440076] initcall nicstar_init+0x0/0x5b returned 0 after 3906 usecs
[   28.444004] calling  hrz_module_init+0x0/0xb1 @ 1
[   28.448003] Madge ATM Horizon [Ultra] driver version 1.2.1
[   28.452012] bus: 'pci': add driver horizon
[   28.456063] initcall hrz_module_init+0x0/0xb1 returned 0 after 7812 usecs
[   28.460006] calling  fore200e_module_init+0x0/0x20 @ 1
[   28.464002] fore200e: FORE Systems 200E-series ATM driver - version 0.3e
[   28.468011] bus: 'pci': add driver fore_200e
[   28.472063] initcall fore200e_module_init+0x0/0x20 returned 0 after 7812 usecs
[   28.476005] calling  eni_init+0x0/0x16 @ 1
[   28.480011] bus: 'pci': add driver eni
[   28.484062] initcall eni_init+0x0/0x16 returned 0 after 3906 usecs
[   28.488004] calling  idt77252_init+0x0/0x2a @ 1
[   28.492002] idt77252_init: at 4230ec71
[   28.496011] bus: 'pci': add driver idt77252
[   28.500063] initcall idt77252_init+0x0/0x2a returned 0 after 7812 usecs
[   28.504005] calling  solos_pci_init+0x0/0x25 @ 1
[   28.508002] Solos PCI Driver Version 0.07
[   28.512012] bus: 'pci': add driver solos
[   28.516072] initcall solos_pci_init+0x0/0x25 returned 0 after 7812 usecs
[   28.520004] calling  adummy_init+0x0/0xda @ 1
[   28.524002] adummy: version 1.0
[   28.527160] device: 'adummy0': device_add
[   28.528012] PM: Adding info for No Bus:adummy0
[   28.532070] initcall adummy_init+0x0/0xda returned 0 after 7812 usecs
[   28.536004] calling  atmtcp_init+0x0/0x11 @ 1
[   28.540004] initcall atmtcp_init+0x0/0x11 returned 0 after 0 usecs
[   28.544003] calling  i2o_iop_init+0x0/0x44 @ 1
[   28.548002] I2O subsystem v1.325
[   28.552002] i2o: max drivers = 8
[   28.555292] bus: 'i2o': registered
[   28.556045] bus: 'i2o': add driver exec-osm
[   28.560068] bus: 'pci': add driver PCI_I2O
[   28.564070] initcall i2o_iop_init+0x0/0x44 returned 0 after 15625 usecs
[   28.572003] calling  i2o_config_init+0x0/0x8c @ 1
[   28.576001] I2O Configuration OSM v1.323
[   28.580002] bus: 'i2o': add driver config-osm
[   28.584057] device: 'i2octl': device_add
[   28.588165] PM: Adding info for No Bus:i2octl
[   28.592053] initcall i2o_config_init+0x0/0x8c returned 0 after 15625 usecs
[   28.600003] calling  i2o_scsi_init+0x0/0x37 @ 1
[   28.604001] I2O SCSI Peripheral OSM v1.316
[   28.608002] bus: 'i2o': add driver scsi-osm
[   28.612054] initcall i2o_scsi_init+0x0/0x37 returned 0 after 7812 usecs
[   28.620005] calling  i2o_proc_init+0x0/0x1af @ 1
[   28.624002] I2O ProcFS OSM v1.316
[   28.628002] bus: 'i2o': add driver proc-osm
[   28.632064] initcall i2o_proc_init+0x0/0x1af returned 0 after 7812 usecs
[   28.640003] calling  fusion_init+0x0/0x10a @ 1
[   28.644002] Fusion MPT base driver 3.04.15
[   28.648001] Copyright (c) 1999-2008 LSI Corporation
[   28.652017] initcall fusion_init+0x0/0x10a returned 0 after 7812 usecs
[   28.660003] calling  mptspi_init+0x0/0xb9 @ 1
[   28.664002] Fusion MPT SPI Host driver 3.04.15
[   28.668017] bus: 'pci': add driver mptspi
[   28.672082] initcall mptspi_init+0x0/0xb9 returned 0 after 7812 usecs
[   28.680003] calling  mptsas_init+0x0/0xe5 @ 1
[   28.684002] Fusion MPT SAS Host driver 3.04.15
[   28.688025] bus: 'pci': add driver mptsas
[   28.692065] initcall mptsas_init+0x0/0xe5 returned 0 after 7812 usecs
[   28.696003] calling  mptctl_init+0x0/0x114 @ 1
[   28.704002] Fusion MPT misc device (ioctl) driver 3.04.15
[   28.708007] device: 'mptctl': device_add
[   28.712099] PM: Adding info for No Bus:mptctl
[   28.716049] mptctl: Registered with Fusion MPT base driver
[   28.720002] mptctl: /dev/mptctl @ (major,minor=10,220)
[   28.728004] initcall mptctl_init+0x0/0x114 returned 0 after 23437 usecs
[   28.732003] calling  fw_core_init+0x0/0x7b @ 1
[   28.736074] bus: 'firewire': registered
[   28.740012] initcall fw_core_init+0x0/0x7b returned 0 after 3906 usecs
[   28.748005] calling  fw_ohci_init+0x0/0x16 @ 1
[   28.752014] bus: 'pci': add driver firewire_ohci
[   28.756071] initcall fw_ohci_init+0x0/0x16 returned 0 after 3906 usecs
[   28.764003] calling  sbp2_init+0x0/0x39 @ 1
[   28.768039] bus: 'firewire': add driver sbp2
[   28.772059] initcall sbp2_init+0x0/0x39 returned 0 after 3906 usecs
[   28.776004] calling  fwnet_init+0x0/0x64 @ 1
[   28.780175] bus: 'firewire': add driver net
[   28.784055] initcall fwnet_init+0x0/0x64 returned 0 after 3906 usecs
[   28.788004] calling  uio_init+0x0/0x7 @ 1
[   28.792003] initcall uio_init+0x0/0x7 returned 0 after 0 usecs
[   28.796003] calling  hilscher_init_module+0x0/0x16 @ 1
[   28.800014] bus: 'pci': add driver hilscher
[   28.804069] initcall hilscher_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.808004] calling  uio_pdrv_init+0x0/0xf @ 1
[   28.812006] bus: 'platform': add driver uio_pdrv
[   28.816070] initcall uio_pdrv_init+0x0/0xf returned 0 after 3906 usecs
[   28.820003] calling  uio_pdrv_genirq_init+0x0/0xf @ 1
[   28.824004] bus: 'platform': add driver uio_pdrv_genirq
[   28.832004] initcall uio_pdrv_genirq_init+0x0/0xf returned 0 after 7812 usecs
[   28.836004] calling  sercos3_init_module+0x0/0x16 @ 1
[   28.840012] bus: 'pci': add driver sercos3
[   28.844065] initcall sercos3_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.848004] calling  init+0x0/0x20 @ 1
[   28.852002] Generic UIO driver for PCI 2.3 devices version: 0.01.0
[   28.856011] bus: 'pci': add driver uio_pci_generic
[   28.860063] initcall init+0x0/0x20 returned 0 after 7812 usecs
[   28.864003] calling  netx_init_module+0x0/0x16 @ 1
[   28.868011] bus: 'pci': add driver netx
[   28.872064] initcall netx_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.876003] calling  cdrom_init+0x0/0x7 @ 1
[   28.880003] initcall cdrom_init+0x0/0x7 returned 0 after 0 usecs
[   28.884004] calling  yenta_socket_init+0x0/0x16 @ 1
[   28.888012] bus: 'pci': add driver yenta_cardbus
[   28.892066] initcall yenta_socket_init+0x0/0x16 returned 0 after 3906 usecs
[   28.896004] calling  aoe_init+0x0/0x9d @ 1
[   28.900017] device class 'aoe': registering
[   28.904062] device: 'err': device_add
[   28.908169] PM: Adding info for No Bus:err
[   28.912056] device: 'discover': device_add
[   28.916073] PM: Adding info for No Bus:discover
[   28.920056] device: 'interfaces': device_add
[   28.924097] PM: Adding info for No Bus:interfaces
[   28.928058] device: 'revalidate': device_add
[   28.932077] PM: Adding info for No Bus:revalidate
[   28.936055] device: 'flush': device_add
[   28.940072] PM: Adding info for No Bus:flush
[   28.944219] aoe: AoE v47 initialised.
[   28.948049] initcall aoe_init+0x0/0x9d returned 0 after 46875 usecs
[   28.952003] calling  uwb_subsys_init+0x0/0x46 @ 1
[   28.956005] device class 'uwb_rc': registering
[   28.960074] initcall uwb_subsys_init+0x0/0x46 returned 0 after 3906 usecs
[   28.964003] calling  wlp_subsys_init+0x0/0x7 @ 1
[   28.968005] initcall wlp_subsys_init+0x0/0x7 returned 0 after 0 usecs
[   28.972003] calling  umc_bus_init+0x0/0xf @ 1
[   28.976064] bus: 'umc': registered
[   28.980004] initcall umc_bus_init+0x0/0xf returned 0 after 3906 usecs
[   28.984003] calling  whci_init+0x0/0x16 @ 1
[   28.988015] bus: 'pci': add driver whci
[   28.992076] initcall whci_init+0x0/0x16 returned 0 after 3906 usecs
[   28.996003] calling  whcrc_driver_init+0x0/0x16 @ 1
[   29.000002] bus: 'umc': add driver whc-rc
[   29.004064] initcall whcrc_driver_init+0x0/0x16 returned 0 after 3906 usecs
[   29.008004] calling  hwarc_driver_init+0x0/0x16 @ 1
[   29.012004] bus: 'usb': add driver hwa-rc
[   29.016059] usbcore: registered new interface driver hwa-rc
[   29.020004] initcall hwarc_driver_init+0x0/0x16 returned 0 after 7812 usecs
[   29.024005] calling  i1480_dfu_driver_init+0x0/0x16 @ 1
[   29.028003] bus: 'usb': add driver i1480-dfu-usb
[   29.032055] usbcore: registered new interface driver i1480-dfu-usb
[   29.036004] initcall i1480_dfu_driver_init+0x0/0x16 returned 0 after 7812 usecs
[   29.040004] calling  i1480_est_init+0x0/0x73 @ 1
[   29.044006] initcall i1480_est_init+0x0/0x73 returned 0 after 0 usecs
[   29.048004] calling  i1480u_driver_init+0x0/0x16 @ 1
[   29.052003] bus: 'usb': add driver i1480u_wlp
[   29.056056] usbcore: registered new interface driver i1480u_wlp
[   29.060004] initcall i1480u_driver_init+0x0/0x16 returned 0 after 7812 usecs
[   29.064004] calling  gpio_vbus_init+0x0/0x14 @ 1
[   29.068005] bus: 'platform': add driver gpio-vbus
[   29.072059] bus: 'platform': remove driver gpio-vbus
[   29.076051] driver: 'gpio-vbus': driver_release
[   29.080008] initcall gpio_vbus_init+0x0/0x14 returned -19 after 11718 usecs
[   29.084003] calling  mon_init+0x0/0xee @ 1
[   29.088011] device class 'usbmon': registering
[   29.092085] device: 'usbmon0': device_add
[   29.096144] PM: Adding info for No Bus:usbmon0
[   29.100058] initcall mon_init+0x0/0xee returned 0 after 11718 usecs
[   29.104003] calling  ehci_hcd_init+0x0/0xa4 @ 1
[   29.108002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   29.112016] bus: 'pci': add driver ehci_hcd
[   29.116020] bus: 'pci': driver_probe_device: matched device 0000:00:02.1 with driver ehci_hcd
[   29.120002] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:02.1
[   29.124041] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
[   29.128003] ehci_hcd 0000:00:02.1: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.1 setup!
[   29.132012] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
[   29.136070] initcall ehci_hcd_init+0x0/0xa4 returned 0 after 27343 usecs
[   29.140003] calling  oxu_module_init+0x0/0xf @ 1
[   29.144004] bus: 'platform': add driver oxu210hp-hcd
[   29.148061] initcall oxu_module_init+0x0/0xf returned 0 after 3906 usecs
[   29.152003] calling  ohci_hcd_mod_init+0x0/0xa1 @ 1
[   29.156002] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   29.160013] bus: 'pci': add driver ohci_hcd
[   29.164011] bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver ohci_hcd
[   29.168003] bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:00:02.0
[   29.172035] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
[   29.176002] ohci_hcd 0000:00:02.0: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.0 setup!
[   29.180012] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
[   29.184076] bus: 'platform': add driver sm501-usb
[   29.188058] initcall ohci_hcd_mod_init+0x0/0xa1 returned 0 after 31250 usecs
[   29.192003] calling  uhci_hcd_init+0x0/0xa4 @ 1
[   29.196003] uhci_hcd: USB Universal Host Controller Interface driver
[   29.200181] bus: 'pci': add driver uhci_hcd
[   29.204066] initcall uhci_hcd_init+0x0/0xa4 returned 0 after 7812 usecs
[   29.208005] calling  xhci_hcd_init+0x0/0x25 @ 1
[   29.212012] bus: 'pci': add driver xhci_hcd
[   29.216064] initcall xhci_hcd_init+0x0/0x25 returned 0 after 3906 usecs
[   29.220004] calling  sl811h_init+0x0/0x36 @ 1
[   29.224002] sl811: driver sl811-hcd, 19 May 2005
[   29.228004] bus: 'platform': add driver sl811-hcd
[   29.232056] initcall sl811h_init+0x0/0x36 returned 0 after 7812 usecs
[   29.236003] calling  c67x00_init+0x0/0xf @ 1
[   29.240003] bus: 'platform': add driver c67x00
[   29.244056] initcall c67x00_init+0x0/0xf returned 0 after 3906 usecs
[   29.248004] calling  wusbcore_init+0x0/0x66 @ 1
[   29.252086] initcall wusbcore_init+0x0/0x66 returned 0 after 0 usecs
[   29.260004] calling  acm_init+0x0/0xcb @ 1
[   29.264012] bus: 'usb': add driver cdc_acm
[   29.268062] usbcore: registered new interface driver cdc_acm
[   29.276002] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[   29.284004] initcall acm_init+0x0/0xcb returned 0 after 19531 usecs
[   29.288003] calling  usblp_init+0x0/0x16 @ 1
[   29.292003] bus: 'usb': add driver usblp
[   29.296056] usbcore: registered new interface driver usblp
[   29.304004] initcall usblp_init+0x0/0x16 returned 0 after 11718 usecs
[   29.308003] calling  wdm_init+0x0/0x16 @ 1
[   29.312003] bus: 'usb': add driver cdc_wdm
[   29.316066] usbcore: registered new interface driver cdc_wdm
[   29.324004] initcall wdm_init+0x0/0x16 returned 0 after 11718 usecs
[   29.328003] calling  usbtmc_init+0x0/0x2d @ 1
[   29.332003] bus: 'usb': add driver usbtmc
[   29.336056] usbcore: registered new interface driver usbtmc
[   29.344004] initcall usbtmc_init+0x0/0x2d returned 0 after 11718 usecs
[   29.348003] calling  usb_stor_init+0x0/0x42 @ 1
[   29.356002] Initializing USB Mass Storage driver...
[   29.360003] bus: 'usb': add driver usb-storage
[   29.364057] usbcore: registered new interface driver usb-storage
[   29.368002] USB Mass Storage support registered.
[   29.376004] initcall usb_stor_init+0x0/0x42 returned 0 after 19531 usecs
[   29.380003] calling  usb_usual_init+0x0/0x30 @ 1
[   29.384003] bus: 'usb': add driver libusual
[   29.388065] usbcore: registered new interface driver libusual
[   29.396004] initcall usb_usual_init+0x0/0x30 returned 0 after 11718 usecs
[   29.404003] calling  alauda_init+0x0/0x16 @ 1
[   29.408003] bus: 'usb': add driver ums-alauda
[   29.412056] usbcore: registered new interface driver ums-alauda
[   29.416004] initcall alauda_init+0x0/0x16 returned 0 after 7812 usecs
[   29.424003] calling  cypress_init+0x0/0x16 @ 1
[   29.428003] bus: 'usb': add driver ums-cypress
[   29.432056] usbcore: registered new interface driver ums-cypress
[   29.440004] initcall cypress_init+0x0/0x16 returned 0 after 11718 usecs
[   29.444003] calling  datafab_init+0x0/0x16 @ 1
[   29.448003] bus: 'usb': add driver ums-datafab
[   29.452056] usbcore: registered new interface driver ums-datafab
[   29.460004] initcall datafab_init+0x0/0x16 returned 0 after 11718 usecs
[   29.468003] calling  freecom_init+0x0/0x16 @ 1
[   29.472003] bus: 'usb': add driver ums-freecom
[   29.476065] usbcore: registered new interface driver ums-freecom
[   29.480004] initcall freecom_init+0x0/0x16 returned 0 after 7812 usecs
[   29.488003] calling  isd200_init+0x0/0x16 @ 1
[   29.492003] bus: 'usb': add driver ums-isd200
[   29.496056] usbcore: registered new interface driver ums-isd200
[   29.504005] initcall isd200_init+0x0/0x16 returned 0 after 11718 usecs
[   29.508003] calling  onetouch_init+0x0/0x16 @ 1
[   29.512003] bus: 'usb': add driver ums-onetouch
[   29.520056] usbcore: registered new interface driver ums-onetouch
[   29.524004] initcall onetouch_init+0x0/0x16 returned 0 after 11718 usecs
[   29.532003] calling  sddr09_init+0x0/0x16 @ 1
[   29.536003] bus: 'usb': add driver ums-sddr09
[   29.540067] usbcore: registered new interface driver ums-sddr09
[   29.544004] initcall sddr09_init+0x0/0x16 returned 0 after 7812 usecs
[   29.552003] calling  usbat_init+0x0/0x16 @ 1
[   29.556003] bus: 'usb': add driver ums-usbat
[   29.560056] usbcore: registered new interface driver ums-usbat
[   29.568004] initcall usbat_init+0x0/0x16 returned 0 after 11718 usecs
[   29.572003] calling  usb_mdc800_init+0x0/0x307 @ 1
[   29.580011] bus: 'usb': add driver mdc800
[   29.584031] usbcore: registered new interface driver mdc800
[   29.588002] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[   29.596004] initcall usb_mdc800_init+0x0/0x307 returned 0 after 15625 usecs
[   29.604003] calling  microtek_drv_init+0x0/0x16 @ 1
[   29.608003] bus: 'usb': add driver microtekX6
[   29.612056] usbcore: registered new interface driver microtekX6
[   29.616004] initcall microtek_drv_init+0x0/0x16 returned 0 after 7812 usecs
[   29.624003] calling  usb_serial_init+0x0/0x1cd @ 1
[   29.628081] bus: 'usb-serial': registered
[   29.632023] bus: 'usb': add driver usbserial
[   29.636056] usbcore: registered new interface driver usbserial
[   29.644002] usbserial: USB Serial Driver core
[   29.648004] initcall usb_serial_init+0x0/0x1cd returned 0 after 19531 usecs
[   29.656003] calling  aircable_init+0x0/0x3a @ 1
[   29.660003] bus: 'usb-serial': add driver aircable
[   29.664055] USB Serial support registered for aircable
[   29.668003] bus: 'usb': add driver aircable
[   29.672055] usbcore: registered new interface driver aircable
[   29.680004] initcall aircable_init+0x0/0x3a returned 0 after 19531 usecs
[   29.688003] calling  ark3116_init+0x0/0x4f @ 1
[   29.692002] bus: 'usb-serial': add driver ark3116
[   29.696054] USB Serial support registered for ark3116
[   29.700003] bus: 'usb': add driver ark3116
[   29.704055] usbcore: registered new interface driver ark3116
[   29.712002] ark3116:v0.6:USB ARK3116 serial/IrDA driver
[   29.716004] initcall ark3116_init+0x0/0x4f returned 0 after 23437 usecs
[   29.720003] calling  belkin_sa_init+0x0/0x49 @ 1
[   29.728002] bus: 'usb-serial': add driver belkin
[   29.732054] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[   29.740003] bus: 'usb': add driver belkin
[   29.744055] usbcore: registered new interface driver belkin
[   29.748002] belkin_sa: v1.3:USB Belkin Serial converter driver
[   29.756004] initcall belkin_sa_init+0x0/0x49 returned 0 after 27343 usecs
[   29.760004] calling  ch341_init+0x0/0x3a @ 1
[   29.768002] bus: 'usb-serial': add driver ch341-uart
[   29.772063] USB Serial support registered for ch341-uart
[   29.776004] bus: 'usb': add driver ch341
[   29.780055] usbcore: registered new interface driver ch341
[   29.784004] initcall ch341_init+0x0/0x3a returned 0 after 15625 usecs
[   29.792003] calling  cp210x_init+0x0/0x49 @ 1
[   29.796002] bus: 'usb-serial': add driver cp210x
[   29.800054] USB Serial support registered for cp210x
[   29.808006] bus: 'usb': add driver cp210x
[   29.812060] usbcore: registered new interface driver cp210x
[   29.816002] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[   29.824004] initcall cp210x_init+0x0/0x49 returned 0 after 27343 usecs
[   29.828003] calling  cyberjack_init+0x0/0x54 @ 1
[   29.832002] bus: 'usb-serial': add driver cyberjack
[   29.840054] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[   29.848003] bus: 'usb': add driver cyberjack
[   29.852055] usbcore: registered new interface driver cyberjack
[   29.856002] cyberjack: v1.01 Matthias Bruestle
[   29.860002] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[   29.868004] initcall cyberjack_init+0x0/0x54 returned 0 after 35156 usecs
[   29.876003] calling  cypress_init+0x0/0x9d @ 1
[   29.880002] bus: 'usb-serial': add driver earthmate
[   29.884054] USB Serial support registered for DeLorme Earthmate USB
[   29.892002] bus: 'usb-serial': add driver cyphidcom
[   29.896054] USB Serial support registered for HID->COM RS232 Adapter
[   29.904002] bus: 'usb-serial': add driver nokiaca42v2
[   29.908054] USB Serial support registered for Nokia CA-42 V2 Adapter
[   29.912003] bus: 'usb': add driver cypress
[   29.916073] usbcore: registered new interface driver cypress
[   29.924002] cypress_m8: v1.10:Cypress USB to Serial Driver
[   29.928004] initcall cypress_init+0x0/0x9d returned 0 after 46875 usecs
[   29.936003] calling  debug_init+0x0/0x3a @ 1
[   29.940002] bus: 'usb-serial': add driver debug
[   29.944054] USB Serial support registered for debug
[   29.948003] bus: 'usb': add driver debug
[   29.952055] usbcore: registered new interface driver debug
[   29.960004] initcall debug_init+0x0/0x3a returned 0 after 19531 usecs
[   29.964003] calling  edgeport_init+0x0/0xa5 @ 1
[   29.968002] bus: 'usb-serial': add driver edgeport_2
[   29.976054] USB Serial support registered for Edgeport 2 port adapter
[   29.980002] bus: 'usb-serial': add driver edgeport_4
[   29.988054] USB Serial support registered for Edgeport 4 port adapter
[   29.992002] bus: 'usb-serial': add driver edgeport_8
[   29.996054] USB Serial support registered for Edgeport 8 port adapter
[   30.004002] bus: 'usb-serial': add driver epic
[   30.008054] USB Serial support registered for EPiC device
[   30.016004] bus: 'usb': add driver io_edgeport
[   30.020055] usbcore: registered new interface driver io_edgeport
[   30.024002] io_edgeport: v2.7:Edgeport USB Serial Driver
[   30.028004] initcall edgeport_init+0x0/0xa5 returned 0 after 58593 usecs
[   30.036003] calling  edgeport_init+0x0/0x63 @ 1
[   30.040002] bus: 'usb-serial': add driver edgeport_ti_1
[   30.048064] USB Serial support registered for Edgeport TI 1 port adapter
[   30.052003] bus: 'usb-serial': add driver edgeport_ti_2
[   30.060054] USB Serial support registered for Edgeport TI 2 port adapter
[   30.064003] bus: 'usb': add driver io_ti
[   30.068055] usbcore: registered new interface driver io_ti
[   30.076002] io_ti: v0.7mode043006:Edgeport USB Serial Driver
[   30.080004] initcall edgeport_init+0x0/0x63 returned 0 after 39062 usecs
[   30.088003] calling  empeg_init+0x0/0x49 @ 1
[   30.092002] bus: 'usb-serial': add driver empeg
[   30.096066] USB Serial support registered for empeg
[   30.100004] bus: 'usb': add driver empeg
[   30.104055] usbcore: registered new interface driver empeg
[   30.112002] empeg: v1.3:USB Empeg Mark I/II Driver
[   30.116004] initcall empeg_init+0x0/0x49 returned 0 after 23437 usecs
[   30.120003] calling  funsoft_init+0x0/0x3a @ 1
[   30.124002] bus: 'usb-serial': add driver funsoft
[   30.132054] USB Serial support registered for funsoft
[   30.136003] bus: 'usb': add driver funsoft
[   30.140055] usbcore: registered new interface driver funsoft
[   30.144004] initcall funsoft_init+0x0/0x3a returned 0 after 19531 usecs
[   30.152003] calling  garmin_init+0x0/0x49 @ 1
[   30.156002] bus: 'usb-serial': add driver garmin_gps
[   30.160054] USB Serial support registered for Garmin GPS usb/tty
[   30.168003] bus: 'usb': add driver garmin_gps
[   30.172063] usbcore: registered new interface driver garmin_gps
[   30.176002] garmin_gps: v0.33:garmin gps driver
[   30.184004] initcall garmin_init+0x0/0x49 returned 0 after 27343 usecs
[   30.188003] calling  hp49gp_init+0x0/0x49 @ 1
[   30.192003] bus: 'usb-serial': add driver hp4X
[   30.196055] USB Serial support registered for hp4X
[   30.204003] bus: 'usb': add driver hp4X
[   30.208055] usbcore: registered new interface driver hp4X
[   30.212002] hp4x: v1.00:HP4x (48/49) Generic Serial driver
[   30.216004] initcall hp49gp_init+0x0/0x49 returned 0 after 23437 usecs
[   30.224003] calling  iuu_init+0x0/0x49 @ 1
[   30.228002] bus: 'usb-serial': add driver iuu_phoenix
[   30.232054] USB Serial support registered for iuu_phoenix
[   30.240003] bus: 'usb': add driver iuu_phoenix
[   30.244055] usbcore: registered new interface driver iuu_phoenix
[   30.248002] iuu_phoenix: v0.11:Infinity USB Unlimited Phoenix driver
[   30.256004] initcall iuu_init+0x0/0x49 returned 0 after 27343 usecs
[   30.260003] calling  keyspan_pda_init+0x0/0x7d @ 1
[   30.268002] bus: 'usb-serial': add driver keyspan_pda
[   30.272055] USB Serial support registered for Keyspan PDA
[   30.276003] bus: 'usb-serial': add driver keyspan_pda_pre
[   30.284054] USB Serial support registered for Keyspan PDA - (prerenumeration)
[   30.288002] bus: 'usb-serial': add driver xircom_no_firm
[   30.296054] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[   30.304003] bus: 'usb': add driver keyspan_pda
[   30.308056] usbcore: registered new interface driver keyspan_pda
[   30.312002] keyspan_pda: v1.1:USB Keyspan PDA Converter driver
[   30.320004] initcall keyspan_pda_init+0x0/0x7d returned 0 after 50781 usecs
[   30.328003] calling  klsi_105_init+0x0/0x49 @ 1
[   30.332002] bus: 'usb-serial': add driver kl5kusb105d
[   30.336064] USB Serial support registered for KL5KUSB105D / PalmConnect
[   30.344004] bus: 'usb': add driver kl5kusb105d
[   30.348055] usbcore: registered new interface driver kl5kusb105d
[   30.352002] kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
[   30.360004] initcall klsi_105_init+0x0/0x49 returned 0 after 27343 usecs
[   30.368003] calling  kobil_init+0x0/0x49 @ 1
[   30.372003] bus: 'usb-serial': add driver kobil
[   30.376055] USB Serial support registered for KOBIL USB smart card terminal
[   30.384003] bus: 'usb': add driver kobil
[   30.388064] usbcore: registered new interface driver kobil
[   30.392002] kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
[   30.400004] initcall kobil_init+0x0/0x49 returned 0 after 27343 usecs
[   30.408003] calling  mct_u232_init+0x0/0x49 @ 1
[   30.412003] bus: 'usb-serial': add driver mct_u232
[   30.416055] USB Serial support registered for MCT U232
[   30.420003] bus: 'usb': add driver mct_u232
[   30.424055] usbcore: registered new interface driver mct_u232
[   30.432002] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
[   30.440004] initcall mct_u232_init+0x0/0x49 returned 0 after 27343 usecs
[   30.444003] calling  moschip7720_init+0x0/0x67 @ 1
[   30.448003] bus: 'usb-serial': add driver moschip7720
[   30.456054] USB Serial support registered for Moschip 2 port adapter
[   30.460002] mos7720: 2.1:Moschip USB Serial Driver
[   30.468003] bus: 'usb': add driver moschip7720
[   30.472067] usbcore: registered new interface driver moschip7720
[   30.476005] initcall moschip7720_init+0x0/0x67 returned 0 after 27343 usecs
[   30.484003] calling  moto_init+0x0/0x3a @ 1
[   30.488003] bus: 'usb-serial': add driver moto-modem
[   30.492064] USB Serial support registered for moto-modem
[   30.500004] bus: 'usb': add driver moto-modem
[   30.504055] usbcore: registered new interface driver moto-modem
[   30.508004] initcall moto_init+0x0/0x3a returned 0 after 19531 usecs
[   30.516003] calling  navman_init+0x0/0x3a @ 1
[   30.520003] bus: 'usb-serial': add driver navman
[   30.524054] USB Serial support registered for navman
[   30.528004] bus: 'usb': add driver navman
[   30.532055] usbcore: registered new interface driver navman
[   30.540004] initcall navman_init+0x0/0x3a returned 0 after 19531 usecs
[   30.544003] calling  omninet_init+0x0/0x49 @ 1
[   30.548002] bus: 'usb-serial': add driver omninet
[   30.556055] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[   30.560003] bus: 'usb': add driver omninet
[   30.564055] usbcore: registered new interface driver omninet
[   30.572002] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
[   30.576004] initcall omninet_init+0x0/0x49 returned 0 after 27343 usecs
[   30.584003] calling  opticon_init+0x0/0x3a @ 1
[   30.588003] bus: 'usb-serial': add driver opticon
[   30.592055] USB Serial support registered for opticon
[   30.596003] bus: 'usb': add driver opticon
[   30.600055] usbcore: registered new interface driver opticon
[   30.608004] initcall opticon_init+0x0/0x3a returned 0 after 19531 usecs
[   30.612003] calling  option_init+0x0/0x49 @ 1
[   30.620003] bus: 'usb-serial': add driver option1
[   30.624075] USB Serial support registered for GSM modem (1-port)
[   30.628004] bus: 'usb': add driver option
[   30.632071] usbcore: registered new interface driver option
[   30.640002] option: v0.7.2:USB Driver for GSM modems
[   30.644004] initcall option_init+0x0/0x49 returned 0 after 23437 usecs
[   30.652003] calling  oti6858_init+0x0/0x3a @ 1
[   30.656003] bus: 'usb-serial': add driver oti6858
[   30.660062] USB Serial support registered for oti6858
[   30.664004] bus: 'usb': add driver oti6858
[   30.668056] usbcore: registered new interface driver oti6858
[   30.676004] initcall oti6858_init+0x0/0x3a returned 0 after 19531 usecs
[   30.680003] calling  qcaux_init+0x0/0x3a @ 1
[   30.684002] bus: 'usb-serial': add driver qcaux
[   30.688054] USB Serial support registered for qcaux
[   30.696003] bus: 'usb': add driver qcaux
[   30.700055] usbcore: registered new interface driver qcaux
[   30.704004] initcall qcaux_init+0x0/0x3a returned 0 after 19531 usecs
[   30.712003] calling  siemens_usb_mpi_init+0x0/0x54 @ 1
[   30.716003] bus: 'usb-serial': add driver siemens_mpi
[   30.720054] USB Serial support registered for siemens_mpi
[   30.728004] bus: 'usb': add driver siemens_mpi
[   30.732056] usbcore: registered new interface driver siemens_mpi
[   30.736002] Driver for Siemens USB/MPI adapter
[   30.740002] Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net
[   30.748004] initcall siemens_usb_mpi_init+0x0/0x54 returned 0 after 31250 usecs
[   30.756003] calling  sierra_init+0x0/0x49 @ 1
[   30.760003] bus: 'usb-serial': add driver sierra
[   30.764055] USB Serial support registered for Sierra USB modem
[   30.772004] bus: 'usb': add driver sierra
[   30.776064] usbcore: registered new interface driver sierra
[   30.780002] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[   30.788005] initcall sierra_init+0x0/0x49 returned 0 after 27343 usecs
[   30.792003] calling  symbol_init+0x0/0x3a @ 1
[   30.796003] bus: 'usb-serial': add driver symbol
[   30.804060] USB Serial support registered for symbol
[   30.808004] bus: 'usb': add driver symbol
[   30.812055] usbcore: registered new interface driver symbol
[   30.816008] initcall symbol_init+0x0/0x3a returned 0 after 19531 usecs
[   30.824003] calling  ti_init+0x0/0x12e @ 1
[   30.828003] bus: 'usb-serial': add driver ti_usb_3410_5052_1
[   30.832055] USB Serial support registered for TI USB 3410 1 port adapter
[   30.840003] bus: 'usb-serial': add driver ti_usb_3410_5052_2
[   30.844054] USB Serial support registered for TI USB 5052 2 port adapter
[   30.852004] bus: 'usb': add driver ti_usb_3410_5052
[   30.856055] usbcore: registered new interface driver ti_usb_3410_5052
[   30.864002] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[   30.872004] initcall ti_init+0x0/0x12e returned 0 after 42968 usecs
[   30.876004] calling  visor_init+0x0/0x15e @ 1
[   30.880003] bus: 'usb-serial': add driver visor
[   30.884064] USB Serial support registered for Handspring Visor / Palm OS
[   30.892003] bus: 'usb-serial': add driver clie_3.5
[   30.896054] USB Serial support registered for Sony Clie 3.5
[   30.904003] bus: 'usb-serial': add driver clie_5
[   30.908063] USB Serial support registered for Sony Clie 5.0
[   30.912004] bus: 'usb': add driver visor
[   30.916055] usbcore: registered new interface driver visor
[   30.924002] visor: USB HandSpring Visor / Palm OS driver
[   30.928004] initcall visor_init+0x0/0x15e returned 0 after 46875 usecs
[   30.936003] calling  vivopay_serial_init+0x0/0x49 @ 1
[   30.940003] bus: 'usb-serial': add driver vivopay-serial
[   30.944055] USB Serial support registered for vivopay-serial
[   30.952004] bus: 'usb': add driver vivopay-serial
[   30.956055] usbcore: registered new interface driver vivopay-serial
[   30.960002] vivopay_serial: v1.0:ViVOpay USB Serial Driver
[   30.968004] initcall vivopay_serial_init+0x0/0x49 returned 0 after 27343 usecs
[   30.972003] calling  zio_init+0x0/0x3a @ 1
[   30.976003] bus: 'usb-serial': add driver zio
[   30.984055] USB Serial support registered for zio
[   30.988004] bus: 'usb': add driver zio
[   30.992055] usbcore: registered new interface driver zio
[   30.996004] initcall zio_init+0x0/0x3a returned 0 after 19531 usecs
[   31.004003] calling  appledisplay_init+0x0/0x4b @ 1
[   31.008081] bus: 'usb': add driver appledisplay
[   31.012067] usbcore: registered new interface driver appledisplay
[   31.016005] initcall appledisplay_init+0x0/0x4b returned 0 after 7812 usecs
[   31.020004] calling  cypress_init+0x0/0x2f @ 1
[   31.024005] bus: 'usb': add driver cypress_cy7c63
[   31.028066] usbcore: registered new interface driver cypress_cy7c63
[   31.032006] initcall cypress_init+0x0/0x2f returned 0 after 7812 usecs
[   31.036003] calling  emi26_init+0x0/0x16 @ 1
[   31.040005] bus: 'usb': add driver emi26 - firmware loader
[   31.044061] usbcore: registered new interface driver emi26 - firmware loader
[   31.048005] initcall emi26_init+0x0/0x16 returned 0 after 7812 usecs
[   31.052003] calling  emi62_init+0x0/0x2d @ 1
[   31.056005] bus: 'usb': add driver emi62 - firmware loader
[   31.060069] usbcore: registered new interface driver emi62 - firmware loader
[   31.064004] initcall emi62_init+0x0/0x2d returned 0 after 7812 usecs
[   31.068004] calling  ftdi_elan_init+0x0/0x127 @ 1
[   31.072002] driver ftdi-elan built at 12:25:45 on Jun 11 2010
[   31.076047] bus: 'usb': add driver ftdi-elan
[   31.080062] usbcore: registered new interface driver ftdi-elan
[   31.088004] initcall ftdi_elan_init+0x0/0x127 returned 0 after 15625 usecs
[   31.092003] calling  usb_idmouse_init+0x0/0x3a @ 1
[   31.096002] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
[   31.104004] bus: 'usb': add driver idmouse
[   31.108057] usbcore: registered new interface driver idmouse
[   31.112004] initcall usb_idmouse_init+0x0/0x3a returned 0 after 15625 usecs
[   31.120003] calling  iowarrior_init+0x0/0x16 @ 1
[   31.124004] bus: 'usb': add driver iowarrior
[   31.128067] usbcore: registered new interface driver iowarrior
[   31.136004] initcall iowarrior_init+0x0/0x16 returned 0 after 11718 usecs
[   31.144003] calling  isight_firmware_init+0x0/0x16 @ 1
[   31.148004] bus: 'usb': add driver isight_firmware
[   31.152057] usbcore: registered new interface driver isight_firmware
[   31.160004] initcall isight_firmware_init+0x0/0x16 returned 0 after 11718 usecs
[   31.168003] calling  tv_init+0x0/0x3c @ 1
[   31.172004] bus: 'usb': add driver trancevibrator
[   31.176056] usbcore: registered new interface driver trancevibrator
[   31.180002] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
[   31.188004] initcall tv_init+0x0/0x3c returned 0 after 15625 usecs
[   31.192003] calling  uss720_init+0x0/0x4d @ 1
[   31.200004] bus: 'usb': add driver uss720
[   31.204053] usbcore: registered new interface driver uss720
[   31.208002] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[   31.216001] uss720: NOTE: this is a special purpose driver to allow nonstandard
[   31.224001] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[   31.232001] uss720: If you just want to connect to a printer, use usblp instead
[   31.240004] initcall uss720_init+0x0/0x4d returned 0 after 39062 usecs
[   31.244003] calling  usb_sevseg_init+0x0/0x2f @ 1
[   31.252004] bus: 'usb': add driver usbsevseg
[   31.256056] usbcore: registered new interface driver usbsevseg
[   31.260004] initcall usb_sevseg_init+0x0/0x2f returned 0 after 7812 usecs
[   31.268003] calling  usb_sisusb_init+0x0/0x16 @ 1
[   31.272004] bus: 'usb': add driver sisusb
[   31.276056] usbcore: registered new interface driver sisusb
[   31.280004] initcall usb_sisusb_init+0x0/0x16 returned 0 after 7812 usecs
[   31.288003] calling  i8042_init+0x0/0x31b @ 1
[   31.292004] bus: 'pnp': add driver i8042 kbd
[   31.296054] bus: 'pnp': add driver i8042 aux
[   31.300059] bus: 'pnp': remove driver i8042 kbd
[   31.304050] driver: 'i8042 kbd': driver_release
[   31.312010] bus: 'pnp': remove driver i8042 aux
[   31.316049] driver: 'i8042 aux': driver_release
[   31.320005] PNP: No PS/2 controller found. Probing ports directly.
[   31.324030] Registering platform device 'i8042'. Parent at platform
[   31.332004] device: 'i8042': device_add
[   31.336008] bus: 'platform': add device i8042
[   31.340014] PM: Adding info for platform:i8042
[   31.344066] bus: 'platform': add driver i8042
[   31.348014] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
[   31.356002] bus: 'platform': really_probe: probing driver i8042 with device i8042
[   31.893201] serio: i8042 KBD port at 0x60,0x64 irq 1
[   31.896019] serio: i8042 AUX port at 0x60,0x64 irq 12
[   31.896017] device: 'serio0': device_add
[   31.896023] bus: 'serio': add device serio0
[   31.896040] PM: Adding info for serio:serio0
[   31.916008] driver: 'i8042': driver_bound: bound to device 'i8042'
[   31.916005] device: 'serio1': device_add
[   31.916017] bus: 'serio': add device serio1
[   31.916041] PM: Adding info for serio:serio1
[   31.932003] bus: 'platform': really_probe: bound device i8042 to driver i8042
[   31.940054] initcall i8042_init+0x0/0x31b returned 0 after 632812 usecs
[   31.948003] calling  parkbd_init+0x0/0x184 @ 1
[   31.952002] parkbd: no such parport
[   31.956003] initcall parkbd_init+0x0/0x184 returned -19 after 3906 usecs
[   31.960003] calling  serport_init+0x0/0x2b @ 1
[   31.968003] initcall serport_init+0x0/0x2b returned 0 after 0 usecs
[   31.972003] calling  ct82c710_init+0x0/0x151 @ 1
[   31.976010] initcall ct82c710_init+0x0/0x151 returned -19 after 0 usecs
[   31.984002] calling  pcips2_init+0x0/0x16 @ 1
[   31.988016] bus: 'pci': add driver pcips2
[   31.992076] initcall pcips2_init+0x0/0x16 returned 0 after 3906 usecs
[   32.000003] calling  altera_ps2_init+0x0/0xf @ 1
[   32.004004] bus: 'platform': add driver altera_ps2
[   32.008057] initcall altera_ps2_init+0x0/0xf returned 0 after 3906 usecs
[   32.016003] calling  emu_init+0x0/0x16 @ 1
[   32.020013] bus: 'pci': add driver Emu10k1_gameport
[   32.024064] initcall emu_init+0x0/0x16 returned 0 after 3906 usecs
[   32.032003] calling  fm801_gp_init+0x0/0x16 @ 1
[   32.036012] bus: 'pci': add driver FM801_gameport
[   32.040063] initcall fm801_gp_init+0x0/0x16 returned 0 after 3906 usecs
[   32.044003] calling  l4_init+0x0/0x2c8 @ 1
[   32.052015] initcall l4_init+0x0/0x2c8 returned -19 after 0 usecs
[   32.056003] calling  mousedev_init+0x0/0x78 @ 1
[   32.060007] device: 'mice': device_add
[   32.064192] PM: Adding info for No Bus:mice
[   32.068063] device: 'psaux': device_add
[   32.072077] PM: Adding info for No Bus:psaux
[   32.076051] mice: PS/2 mouse device common for all mice
[   32.084004] initcall mousedev_init+0x0/0x78 returned 0 after 23437 usecs
[   32.088003] calling  joydev_init+0x0/0xf @ 1
[   32.092003] initcall joydev_init+0x0/0xf returned 0 after 0 usecs
[   32.100002] calling  evdev_init+0x0/0xf @ 1
[   32.104003] initcall evdev_init+0x0/0xf returned 0 after 0 usecs
[   32.108002] calling  atkbd_init+0x0/0x20 @ 1
[   32.112009] bus: 'serio': add driver atkbd
[   32.120001] initcall atkbd_init+0x0/0x20 returned 0 after 7812 usecs
[   32.120006] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
[   32.120009] bus: 'serio': really_probe: probing driver atkbd with device serio0
[   32.140006] calling  gpio_keys_init+0x0/0xf @ 1
[   32.144005] bus: 'platform': add driver gpio-keys
[   32.148062] initcall gpio_keys_init+0x0/0xf returned 0 after 3906 usecs
[   32.156003] calling  lm8323_init+0x0/0x11 @ 1
[   32.160004] bus: 'i2c': add driver lm8323
[   32.164056] i2c-core: driver [lm8323] registered
[   32.168004] initcall lm8323_init+0x0/0x11 returned 0 after 7812 usecs
[   32.176003] calling  matrix_keypad_init+0x0/0xf @ 1
[   32.180004] bus: 'platform': add driver matrix-keypad
[   32.184057] initcall matrix_keypad_init+0x0/0xf returned 0 after 3906 usecs
[   32.192003] calling  max7359_init+0x0/0x11 @ 1
[   32.196003] bus: 'i2c': add driver max7359
[   32.200062] i2c-core: driver [max7359] registered
[   32.204004] initcall max7359_init+0x0/0x11 returned 0 after 7812 usecs
[   32.212003] calling  nkbd_init+0x0/0x16 @ 1
[   32.216002] bus: 'serio': add driver newtonkbd
[   32.220059] initcall nkbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.228003] calling  opencores_kbd_init+0x0/0xf @ 1
[   32.232004] bus: 'platform': add driver opencores-kbd
[   32.236056] initcall opencores_kbd_init+0x0/0xf returned 0 after 3906 usecs
[   32.244003] calling  skbd_init+0x0/0x16 @ 1
[   32.248002] bus: 'serio': add driver stowaway
[   32.252058] initcall skbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.260003] calling  sunkbd_init+0x0/0x16 @ 1
[   32.264002] bus: 'serio': add driver sunkbd
[   32.268058] initcall sunkbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.276003] calling  xtkbd_init+0x0/0x16 @ 1
[   32.280002] bus: 'serio': add driver xtkbd
[   32.284067] initcall xtkbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.288003] calling  a3d_init+0x0/0x16 @ 1
[   32.292002] bus: 'gameport': add driver adc
[   32.296060] initcall a3d_init+0x0/0x16 returned 0 after 3906 usecs
[   32.304003] calling  adi_init+0x0/0x16 @ 1
[   32.308002] bus: 'gameport': add driver adi
[   32.312059] initcall adi_init+0x0/0x16 returned 0 after 3906 usecs
[   32.316003] calling  analog_init+0x0/0xcd @ 1
[   32.324002] bus: 'gameport': add driver analog
[   32.328059] initcall analog_init+0x0/0xcd returned 0 after 3906 usecs
[   32.332003] calling  db9_init+0x0/0x3ce @ 1
[   32.336003] initcall db9_init+0x0/0x3ce returned -19 after 0 usecs
[   32.344003] calling  gc_init+0x0/0x652 @ 1
[   32.348003] initcall gc_init+0x0/0x652 returned -19 after 0 usecs
[   32.352003] calling  gf2k_init+0x0/0x16 @ 1
[   32.356002] bus: 'gameport': add driver gf2k
[   32.364059] initcall gf2k_init+0x0/0x16 returned 0 after 7812 usecs
[   32.368003] calling  grip_init+0x0/0x16 @ 1
[   32.372002] bus: 'gameport': add driver grip_mp
[   32.376059] initcall grip_init+0x0/0x16 returned 0 after 3906 usecs
[   32.384003] calling  guillemot_init+0x0/0x16 @ 1
[   32.388002] bus: 'gameport': add driver guillemot
[   32.392059] initcall guillemot_init+0x0/0x16 returned 0 after 3906 usecs
[   32.400004] calling  iforce_init+0x0/0x41 @ 1
[   32.404007] bus: 'usb': add driver iforce
[   32.408063] usbcore: registered new interface driver iforce
[   32.412002] bus: 'serio': add driver iforce
[   32.416067] initcall iforce_init+0x0/0x41 returned 0 after 11718 usecs
[   32.424003] calling  interact_init+0x0/0x16 @ 1
[   32.428002] bus: 'gameport': add driver interact
[   32.432059] initcall interact_init+0x0/0x16 returned 0 after 3906 usecs
[   32.440003] calling  magellan_init+0x0/0x16 @ 1
[   32.444002] bus: 'serio': add driver magellan
[   32.448059] initcall magellan_init+0x0/0x16 returned 0 after 3906 usecs
[   32.456003] calling  sw_init+0x0/0x16 @ 1
[   32.460002] bus: 'gameport': add driver sidewinder
[   32.464058] initcall sw_init+0x0/0x16 returned 0 after 3906 usecs
[   32.472003] calling  spaceball_init+0x0/0x16 @ 1
[   32.476002] bus: 'serio': add driver spaceball
[   32.480058] initcall spaceball_init+0x0/0x16 returned 0 after 3906 usecs
[   32.488003] calling  spaceorb_init+0x0/0x16 @ 1
[   32.492002] bus: 'serio': add driver spaceorb
[   32.496059] initcall spaceorb_init+0x0/0x16 returned 0 after 3906 usecs
[   32.504003] calling  stinger_init+0x0/0x16 @ 1
[   32.508002] bus: 'serio': add driver stinger
[   32.512058] initcall stinger_init+0x0/0x16 returned 0 after 3906 usecs
[   32.516003] calling  tmdc_init+0x0/0x16 @ 1
[   32.520002] bus: 'gameport': add driver tmdc
[   32.524068] initcall tmdc_init+0x0/0x16 returned 0 after 3906 usecs
[   32.532003] calling  tgfx_init+0x0/0x3c7 @ 1
[   32.536003] initcall tgfx_init+0x0/0x3c7 returned -19 after 0 usecs
[   32.544003] calling  twidjoy_init+0x0/0x16 @ 1
[   32.548002] bus: 'serio': add driver twidjoy
[   32.552059] initcall twidjoy_init+0x0/0x16 returned 0 after 3906 usecs
[   32.556003] calling  warrior_init+0x0/0x16 @ 1
[   32.564002] bus: 'serio': add driver warrior
[   32.568058] initcall warrior_init+0x0/0x16 returned 0 after 3906 usecs
[   32.572003] calling  zhenhua_init+0x0/0x16 @ 1
[   32.576002] bus: 'serio': add driver zhenhua
[   32.580059] initcall zhenhua_init+0x0/0x16 returned 0 after 7812 usecs
[   32.588003] calling  usb_acecad_init+0x0/0x2d @ 1
[   32.592006] bus: 'usb': add driver usb_acecad
[   32.596057] usbcore: registered new interface driver usb_acecad
[   32.604002] acecad: v3.2:USB Acecad Flair tablet driver
[   32.608003] initcall usb_acecad_init+0x0/0x2d returned 0 after 15625 usecs
[   32.616003] calling  kbtab_init+0x0/0x2d @ 1
[   32.636008] bus: 'usb': add driver kbtab
[   32.652024] device: 'input0': device_add
[   32.652058] usbcore: registered new interface driver kbtab
[   32.652060] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[   32.652064] initcall kbtab_init+0x0/0x2d returned 0 after 19531 usecs
[   32.652067] calling  pm860x_touch_init+0x0/0xf @ 1
[   32.652072] bus: 'platform': add driver 88pm860x-touch
[   32.652129] initcall pm860x_touch_init+0x0/0xf returned 0 after 0 usecs
[   32.652132] calling  ad7879_init+0x0/0x11 @ 1
[   32.652135] bus: 'i2c': add driver ad7879
[   32.652187] i2c-core: driver [ad7879] registered
[   32.652191] initcall ad7879_init+0x0/0x11 returned 0 after 0 usecs
[   32.652194] calling  dynapro_init+0x0/0x16 @ 1
[   32.652196] bus: 'serio': add driver dynapro
[   32.652271] initcall dynapro_init+0x0/0x16 returned 0 after 0 usecs
[   32.652274] calling  gunze_init+0x0/0x16 @ 1
[   32.652277] bus: 'serio': add driver gunze
[   32.652334] initcall gunze_init+0x0/0x16 returned 0 after 0 usecs
[   32.652337] calling  eeti_ts_init+0x0/0x11 @ 1
[   32.652340] bus: 'i2c': add driver eeti_ts
[   32.652392] i2c-core: driver [eeti_ts] registered
[   32.652395] initcall eeti_ts_init+0x0/0x11 returned 0 after 0 usecs
[   32.652398] calling  inexio_init+0x0/0x16 @ 1
[   32.652401] bus: 'serio': add driver inexio
[   32.652457] initcall inexio_init+0x0/0x16 returned 0 after 0 usecs
[   32.652461] calling  mcs5000_ts_init+0x0/0x11 @ 1
[   32.652463] bus: 'i2c': add driver mcs5000_ts
[   32.652515] i2c-core: driver [mcs5000_ts] registered
[   32.652519] initcall mcs5000_ts_init+0x0/0x11 returned 0 after 0 usecs
[   32.652522] calling  mk712_init+0x0/0x1b4 @ 1
[   32.652528] mk712: device not present
[   32.652532] initcall mk712_init+0x0/0x1b4 returned -19 after 0 usecs
[   32.652535] calling  usbtouch_init+0x0/0x16 @ 1
[   32.652542] bus: 'usb': add driver usbtouchscreen
[   32.652599] usbcore: registered new interface driver usbtouchscreen
[   32.652602] initcall usbtouch_init+0x0/0x16 returned 0 after 0 usecs
[   32.652605] calling  pm_init+0x0/0x16 @ 1
[   32.652608] bus: 'serio': add driver penmountlpc
[   32.652665] initcall pm_init+0x0/0x16 returned 0 after 0 usecs
[   32.652668] calling  tr_init+0x0/0x16 @ 1
[   32.652670] bus: 'serio': add driver touchright
[   32.652738] initcall tr_init+0x0/0x16 returned 0 after 0 usecs
[   32.652741] calling  tw_init+0x0/0x16 @ 1
[   32.652743] bus: 'serio': add driver touchwin
[   32.652810] initcall tw_init+0x0/0x16 returned 0 after 0 usecs
[   32.652813] calling  tsc2007_init+0x0/0x11 @ 1
[   32.652816] bus: 'i2c': add driver tsc2007
[   32.652868] i2c-core: driver [tsc2007] registered
[   32.652872] initcall tsc2007_init+0x0/0x11 returned 0 after 0 usecs
[   32.652875] calling  ad714x_i2c_init+0x0/0x11 @ 1
[   32.652878] bus: 'i2c': add driver ad714x_captouch
[   32.652931] i2c-core: driver [ad714x_captouch] registered
[   32.652934] initcall ad714x_i2c_init+0x0/0x11 returned 0 after 0 usecs
[   32.652937] calling  apanel_init+0x0/0x179 @ 1
[   32.653094] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[   32.653094] initcall apanel_init+0x0/0x179 returned -19 after 0 usecs
[   32.653094] calling  ati_remote_init+0x0/0x3c @ 1
[   32.653094] bus: 'usb': add driver ati_remote
[   32.653094] usbcore: registered new interface driver ati_remote
[   32.653094] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
[   32.653094] initcall ati_remote_init+0x0/0x3c returned 0 after 0 usecs
[   32.653094] calling  ati_remote2_init+0x0/0x3c @ 1
[   32.653094] bus: 'usb': add driver ati_remote2
[   32.653094] usbcore: registered new interface driver ati_remote2
[   32.653094] ati_remote2: ATI/Philips USB RF remote driver 0.3
[   32.653094] initcall ati_remote2_init+0x0/0x3c returned 0 after 0 usecs
[   32.653094] calling  cm109_init+0x0/0xdc @ 1
[   32.653094] cm109: Keymap for Komunikate KIP1000 phone loaded
[   32.653094] bus: 'usb': add driver cm109
[   32.653094] usbcore: registered new interface driver cm109
[   32.653094] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[   32.653094] initcall cm109_init+0x0/0xdc returned 0 after 0 usecs
[   32.653094] calling  usb_keyspan_init+0x0/0x2f @ 1
[   32.653094] bus: 'usb': add driver keyspan_remote
[   32.653094] usbcore: registered new interface driver keyspan_remote
[   32.653094] initcall usb_keyspan_init+0x0/0x2f returned 0 after 0 usecs
[   32.653094] calling  max8925_onkey_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver max8925-onkey
[   32.653094] initcall max8925_onkey_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  wbcir_init+0x0/0x40 @ 1
[   32.653094] bus: 'pnp': add driver Winbond CIR
[   32.653094] initcall wbcir_init+0x0/0x40 returned 0 after 0 usecs
[   32.653094] calling  wm831x_on_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver wm831x-on
[   32.653094] initcall wm831x_on_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  yealink_dev_init+0x0/0x2d @ 1
[   32.653094] bus: 'usb': add driver yealink
[   32.653094] usbcore: registered new interface driver yealink
[   32.653094] yealink: yld-20051230:Yealink phone driver
[   32.653094] initcall yealink_dev_init+0x0/0x2d returned 0 after 0 usecs
[   32.653094] calling  bq4802_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver rtc-bq4802
[   32.653094] initcall bq4802_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1286_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver rtc-ds1286
[   32.653094] initcall ds1286_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1307_init+0x0/0x11 @ 1
[   32.653094] bus: 'i2c': add driver rtc-ds1307
[   32.653094] i2c-core: driver [rtc-ds1307] registered
[   32.653094] initcall ds1307_init+0x0/0x11 returned 0 after 0 usecs
[   32.653094] calling  ds1511_rtc_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver ds1511
[   32.653094] initcall ds1511_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1553_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver rtc-ds1553
[   32.653094] initcall ds1553_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1672_init+0x0/0x11 @ 1
[   32.653094] bus: 'i2c': add driver rtc-ds1672
[   32.653094] i2c-core: driver [rtc-ds1672] registered
[   32.653097] initcall ds1672_init+0x0/0x11 returned 0 after 0 usecs
[   32.653100] calling  fm3130_init+0x0/0x11 @ 1
[   32.653102] bus: 'i2c': add driver rtc-fm3130
[   32.653154] i2c-core: driver [rtc-fm3130] registered
[   32.653158] initcall fm3130_init+0x0/0x11 returned 0 after 0 usecs
[   32.653161] calling  isl1208_init+0x0/0x11 @ 1
[   32.653164] bus: 'i2c': add driver rtc-isl1208
[   32.653225] i2c-core: driver [rtc-isl1208] registered
[   32.653229] initcall isl1208_init+0x0/0x11 returned 0 after 0 usecs
[   32.653232] calling  m48t35_init+0x0/0xf @ 1
[   32.653237] bus: 'platform': add driver rtc-m48t35
[   32.653293] initcall m48t35_init+0x0/0xf returned 0 after 0 usecs
[   32.653296] calling  m48t59_rtc_init+0x0/0xf @ 1
[   32.653300] bus: 'platform': add driver rtc-m48t59
[   32.653366] initcall m48t59_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.653369] calling  m48t86_rtc_init+0x0/0xf @ 1
[   32.653373] bus: 'platform': add driver rtc-m48t86
[   32.653429] initcall m48t86_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.653432] calling  max6900_init+0x0/0x11 @ 1
[   32.653435] bus: 'i2c': add driver rtc-max6900
[   32.653488] i2c-core: driver [rtc-max6900] registered
[   32.653491] initcall max6900_init+0x0/0x11 returned 0 after 0 usecs
[   32.653495] calling  msm6242_rtc_init+0x0/0x14 @ 1
[   32.653499] bus: 'platform': add driver rtc-msm6242
[   32.653555] bus: 'platform': remove driver rtc-msm6242
[   32.653605] driver: 'rtc-msm6242': driver_release
[   32.653612] initcall msm6242_rtc_init+0x0/0x14 returned -19 after 0 usecs
[   32.653615] calling  rp5c01_rtc_init+0x0/0x14 @ 1
[   32.653619] bus: 'platform': add driver rtc-rp5c01
[   32.653673] bus: 'platform': remove driver rtc-rp5c01
[   32.653722] driver: 'rtc-rp5c01': driver_release
[   32.653729] initcall rp5c01_rtc_init+0x0/0x14 returned -19 after 0 usecs
[   32.653732] calling  rs5c372_init+0x0/0x11 @ 1
[   32.653736] bus: 'i2c': add driver rtc-rs5c372
[   32.653788] i2c-core: driver [rtc-rs5c372] registered
[   32.653792] initcall rs5c372_init+0x0/0x11 returned 0 after 0 usecs
[   32.653795] calling  rx8581_init+0x0/0x11 @ 1
[   32.653798] bus: 'i2c': add driver rtc-rx8581
[   32.653850] i2c-core: driver [rtc-rx8581] registered
[   32.653853] initcall rx8581_init+0x0/0x11 returned 0 after 0 usecs
[   32.653856] calling  s35390a_rtc_init+0x0/0x11 @ 1
[   32.653859] bus: 'i2c': add driver rtc-s35390a
[   32.653911] i2c-core: driver [rtc-s35390a] registered
[   32.653915] initcall s35390a_rtc_init+0x0/0x11 returned 0 after 0 usecs
[   32.653918] calling  test_init+0x0/0x93 @ 1
[   32.653923] bus: 'platform': add driver rtc-test
[   32.653984] Registering platform device 'rtc-test.0'. Parent at platform
[   32.653987] device: 'rtc-test.0': device_add
[   32.653994] bus: 'platform': add device rtc-test.0
[   32.654016] PM: Adding info for platform:rtc-test.0
[   32.654077] bus: 'platform': driver_probe_device: matched device rtc-test.0 with driver rtc-test
[   32.654080] bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.0
[   32.654108] device: 'rtc0': device_add
[   32.654270] PM: Adding info for No Bus:rtc0
[   32.654325] rtc-test rtc-test.0: rtc core: registered test as rtc0
[   32.654329] driver: 'rtc-test.0': driver_bound: bound to device 'rtc-test'
[   32.654332] bus: 'platform': really_probe: bound device rtc-test.0 to driver rtc-test
[   32.654337] Registering platform device 'rtc-test.1'. Parent at platform
[   32.654340] device: 'rtc-test.1': device_add
[   32.654346] bus: 'platform': add device rtc-test.1
[   32.654359] PM: Adding info for platform:rtc-test.1
[   32.654416] bus: 'platform': driver_probe_device: matched device rtc-test.1 with driver rtc-test
[   32.654419] bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.1
[   32.654432] device: 'rtc1': device_add
[   32.654535] PM: Adding info for No Bus:rtc1
[   32.654588] rtc-test rtc-test.1: rtc core: registered test as rtc1
[   32.654592] driver: 'rtc-test.1': driver_bound: bound to device 'rtc-test'
[   32.654595] bus: 'platform': really_probe: bound device rtc-test.1 to driver rtc-test
[   32.654601] initcall test_init+0x0/0x93 returned 0 after 0 usecs
[   32.654604] calling  v3020_init+0x0/0xf @ 1
[   32.654610] bus: 'platform': add driver v3020
[   32.654669] initcall v3020_init+0x0/0xf returned 0 after 0 usecs
[   32.654672] calling  wm831x_rtc_init+0x0/0xf @ 1
[   32.654676] bus: 'platform': add driver wm831x-rtc
[   32.654734] initcall wm831x_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.654737] calling  x1205_init+0x0/0x11 @ 1
[   32.654741] bus: 'i2c': add driver rtc-x1205
[   32.654805] i2c-core: driver [rtc-x1205] registered
[   32.654809] initcall x1205_init+0x0/0x11 returned 0 after 0 usecs
[   32.654813] calling  i2c_smbus_init+0x0/0x11 @ 1
[   32.654816] bus: 'i2c': add driver smbus_alert
[   32.654868] i2c-core: driver [smbus_alert] registered
[   32.654872] initcall i2c_smbus_init+0x0/0x11 returned 0 after 0 usecs
[   32.654875] calling  ali1563_init+0x0/0x16 @ 1
[   32.654891] bus: 'pci': add driver ali1563_smbus
[   32.654967] initcall ali1563_init+0x0/0x16 returned 0 after 0 usecs
[   32.654971] calling  i2c_ali15x3_init+0x0/0x16 @ 1
[   32.654983] bus: 'pci': add driver ali15x3_smbus
[   32.655046] initcall i2c_ali15x3_init+0x0/0x16 returned 0 after 0 usecs
[   32.655049] calling  amd756_init+0x0/0x16 @ 1
[   32.655062] bus: 'pci': add driver amd756_smbus
[   32.655125] initcall amd756_init+0x0/0x16 returned 0 after 0 usecs
[   32.655128] calling  i2c_amd8111_init+0x0/0x16 @ 1
[   32.655141] bus: 'pci': add driver amd8111_smbus2
[   32.655213] initcall i2c_amd8111_init+0x0/0x16 returned 0 after 0 usecs
[   32.655216] calling  i2c_i801_init+0x0/0x9e @ 1
[   32.655549] bus: 'pci': add driver i801_smbus
[   32.655615] initcall i2c_i801_init+0x0/0x9e returned 0 after 0 usecs
[   32.655618] calling  i2c_sch_init+0x0/0xf @ 1
[   32.655623] bus: 'platform': add driver isch_smbus
[   32.655680] initcall i2c_sch_init+0x0/0xf returned 0 after 0 usecs
[   32.655684] calling  nforce2_init+0x0/0x16 @ 1
[   32.655697] bus: 'pci': add driver nForce2_smbus
[   32.655708] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver nForce2_smbus
[   32.655711] bus: 'pci': really_probe: probing driver nForce2_smbus with device 0000:00:01.1
[   32.655754] device: 'i2c-0': device_add
[   32.655764] bus: 'i2c': add device i2c-0
[   32.655775] PM: Adding info for i2c:i2c-0
[   32.655830] i2c i2c-0: adapter [SMBus nForce2 adapter at 4c00] registered
[   32.655838] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[   32.655845] device: 'i2c-1': device_add
[   32.655855] bus: 'i2c': add device i2c-1
[   32.655865] PM: Adding info for i2c:i2c-1
[   32.655915] i2c i2c-1: adapter [SMBus nForce2 adapter at 4c40] registered
[   32.655920] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[   32.655923] driver: '0000:00:01.1': driver_bound: bound to device 'nForce2_smbus'
[   32.655927] bus: 'pci': really_probe: bound device 0000:00:01.1 to driver nForce2_smbus
[   32.655985] initcall nforce2_init+0x0/0x16 returned 0 after 0 usecs
[   32.655988] calling  i2c_vt586b_init+0x0/0x16 @ 1
[   32.655998] bus: 'pci': add driver vt586b_smbus
[   32.655998] initcall i2c_vt586b_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  i2c_vt596_init+0x0/0x16 @ 1
[   32.655998] bus: 'pci': add driver vt596_smbus
[   32.655998] initcall i2c_vt596_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  ocores_i2c_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver ocores-i2c
[   32.655998] initcall ocores_i2c_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  i2c_pca_pf_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver i2c-pca-platform
[   32.655998] initcall i2c_pca_pf_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  i2c_adap_simtec_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver simtec-i2c
[   32.655998] initcall i2c_adap_simtec_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  xiic_i2c_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver xiic-i2c
[   32.655998] initcall xiic_i2c_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  i2c_parport_init+0x0/0x43 @ 1
[   32.655998] i2c-parport: adapter type unspecified
[   32.655998] initcall i2c_parport_init+0x0/0x43 returned -19 after 0 usecs
[   32.655998] calling  taos_init+0x0/0x16 @ 1
[   32.655998] bus: 'serio': add driver taos-evm
[   32.655998] initcall taos_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  usb_i2c_tiny_usb_init+0x0/0x16 @ 1
[   32.655998] bus: 'usb': add driver i2c-tiny-usb
[   32.655998] usbcore: registered new interface driver i2c-tiny-usb
[   32.655998] initcall usb_i2c_tiny_usb_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  scx200_acb_init+0x0/0x1e3 @ 1
[   32.655998] scx200_acb: NatSemi SCx200 ACCESS.bus Driver
[   32.655998] initcall scx200_acb_init+0x0/0x1e3 returned -19 after 0 usecs
[   32.655998] calling  scx200_i2c_init+0x0/0xb9 @ 1
[   32.655998] scx200_i2c: NatSemi SCx200 I2C Driver
[   32.655998] scx200_i2c: no SCx200 gpio pins available
[   32.655998] initcall scx200_i2c_init+0x0/0xb9 returned -19 after 0 usecs
[   32.655998] calling  pps_ktimer_init+0x0/0x7e @ 1
[   32.655998] device: 'pps0': device_add
[   32.655998] PM: Adding info for No Bus:pps0
[   32.655998] new PPS source ktimer at ID 0
[   32.655998] ktimer PPS source registered at 0
[   32.655998] initcall pps_ktimer_init+0x0/0x7e returned 0 after 0 usecs
[   32.655998] calling  pda_power_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver pda-power
[   32.655998] initcall pda_power_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  max8925_power_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver max8925-power
[   32.655998] initcall max8925_power_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  wm831x_backup_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver wm831x-backup
[   32.655998] initcall wm831x_backup_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  test_power_init+0x0/0x5b @ 1
[   32.655998] device: 'test_ac': device_add
[   32.655998] PM: Adding info for No Bus:test_ac
[   32.655998] device: 'test_battery': device_add
[   32.655998] PM: Adding info for No Bus:test_battery
[   32.655998] test_power_get_battery_property: some properties deliberately report errors.
[   32.655998] power_supply test_battery: driver failed to report `charge_full' property
[   32.655998] device: 'test_battery': dev_uevent: class uevent() returned -22
[   32.655998] initcall test_power_init+0x0/0x5b returned 0 after 0 usecs
[   32.655998] calling  ds278x_init+0x0/0x11 @ 1
[   32.655998] bus: 'i2c': add driver ds2782-battery
[   32.655998] test_power_get_battery_property: some properties deliberately report errors.
[   32.655998] power_supply test_battery: driver failed to report `charge_full' property
[   32.655998] device: 'test_battery': dev_uevent: class uevent() returned -22
[   32.655998] i2c-core: driver [ds2782-battery] registered
[   32.655998] initcall ds278x_init+0x0/0x11 returned 0 after 0 usecs
[   32.655998] calling  max17040_init+0x0/0x11 @ 1
[   32.655998] bus: 'i2c': add driver max17040
[   32.655998] i2c-core: driver [max17040] registered
[   32.655998] initcall max17040_init+0x0/0x11 returned 0 after 0 usecs
[   32.655998] calling  sensors_w83792d_init+0x0/0x11 @ 1
[   32.655998] bus: 'i2c': add driver w83792d
[   32.655998] i2c-core: driver [w83792d] registered
[   32.655998] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   32.656047] PM: Adding info for No Bus:input0
[   32.660097] input: AT Translated Set 2 keyboard as /class/input/input0
[   32.660007] i2c i2c-0: Transaction failed (0x10)!
[   32.660011] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   32.664020] device: 'event0': device_add
[   32.668191] PM: Adding info for No Bus:event0
[   32.668005] i2c i2c-0: Transaction failed (0x10)!
[   32.668007] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   32.672062] driver: 'serio0': driver_bound: bound to device 'atkbd'
[   32.676004] bus: 'serio': really_probe: bound device serio0 to driver atkbd
[   32.676005] i2c i2c-0: Transaction failed (0x10)!
[   32.676007] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   32.680004] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd
[   32.684002] bus: 'serio': really_probe: probing driver atkbd with device serio1
[   32.684005] i2c i2c-0: Transaction failed (0x10)!
[   32.684013] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   32.692019] i2c i2c-1: Transaction failed (0x10)!
[   32.696003] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   32.708004] i2c i2c-1: Transaction failed (0x10)!
[   32.712002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   32.724003] i2c i2c-1: Transaction failed (0x10)!
[   32.728002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   32.740003] i2c i2c-1: Transaction failed (0x10)!
[   32.744007] initcall sensors_w83792d_init+0x0/0x11 returned 0 after 89843 usecs
[   32.752003] calling  sensors_w83781d_init+0x0/0x367 @ 1
[   32.756026] w83781d: Detection failed at step 3
[   32.760015] bus: 'i2c': add driver w83781d
[   32.764058] i2c-core: driver [w83781d] registered
[   32.768006] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[   32.784004] i2c i2c-0: Transaction failed (0x10)!
[   32.788002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   32.800003] i2c i2c-0: Transaction failed (0x10)!
[   32.804005] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   32.816004] i2c i2c-0: Transaction failed (0x10)!
[   32.820002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   32.832004] i2c i2c-0: Transaction failed (0x10)!
[   32.836002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   32.848003] i2c i2c-0: Transaction failed (0x10)!
[   32.852002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   32.864003] i2c i2c-0: Transaction failed (0x10)!
[   32.868002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   32.880004] i2c i2c-0: Transaction failed (0x10)!
[   32.884002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   32.896004] i2c i2c-0: Transaction failed (0x10)!
[   32.900007] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[   32.912004] i2c i2c-1: Transaction failed (0x10)!
[   32.916002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   32.928004] i2c i2c-1: Transaction failed (0x10)!
[   32.932002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   32.944004] i2c i2c-1: Transaction failed (0x10)!
[   32.948003] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   32.960004] i2c i2c-1: Transaction failed (0x10)!
[   32.964002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   32.976004] i2c i2c-1: Transaction failed (0x10)!
[   32.980002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   32.992004] i2c i2c-1: Transaction failed (0x10)!
[   32.996002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.008004] i2c i2c-1: Transaction failed (0x10)!
[   33.012002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   33.024004] i2c i2c-1: Transaction failed (0x10)!
[   33.028007] initcall sensors_w83781d_init+0x0/0x367 returned 0 after 265625 usecs
[   33.036003] calling  sensors_w83791d_init+0x0/0x11 @ 1
[   33.040003] bus: 'i2c': add driver w83791d
[   33.044055] i2c-core: driver [w83791d] registered
[   33.048005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.064004] i2c i2c-0: Transaction failed (0x10)!
[   33.068002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.080004] i2c i2c-0: Transaction failed (0x10)!
[   33.084002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.096004] i2c i2c-0: Transaction failed (0x10)!
[   33.100002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   33.112004] i2c i2c-0: Transaction failed (0x10)!
[   33.116007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   33.128004] i2c i2c-1: Transaction failed (0x10)!
[   33.132002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   33.144004] i2c i2c-1: Transaction failed (0x10)!
[   33.148002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.160004] i2c i2c-1: Transaction failed (0x10)!
[   33.164002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   33.176004] i2c i2c-1: Transaction failed (0x10)!
[   33.180006] initcall sensors_w83791d_init+0x0/0x11 returned 0 after 136718 usecs
[   33.188003] calling  abituguru3_init+0x0/0x1f3 @ 1
[   33.192007] initcall abituguru3_init+0x0/0x1f3 returned -19 after 0 usecs
[   33.200004] calling  ad7414_init+0x0/0x11 @ 1
[   33.204005] bus: 'i2c': add driver ad7414
[   33.208056] i2c-core: driver [ad7414] registered
[   33.212004] initcall ad7414_init+0x0/0x11 returned 0 after 7812 usecs
[   33.220003] calling  sensors_adm1021_init+0x0/0x11 @ 1
[   33.224003] bus: 'i2c': add driver adm1021
[   33.228054] i2c-core: driver [adm1021] registered
[   33.232005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   33.248004] i2c i2c-0: Transaction failed (0x10)!
[   33.252002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   33.264004] i2c i2c-0: Transaction failed (0x10)!
[   33.268002] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   33.280004] i2c i2c-0: Transaction failed (0x10)!
[   33.284002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   33.296004] i2c i2c-0: Transaction failed (0x10)!
[   33.300002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   33.312004] i2c i2c-0: Transaction failed (0x10)!
[   33.316002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   33.328004] i2c i2c-0: Transaction failed (0x10)!
[   33.332002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   33.344004] i2c i2c-0: Transaction failed (0x10)!
[   33.348002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   33.360004] i2c i2c-0: Transaction failed (0x10)!
[   33.364002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   33.376004] i2c i2c-0: Transaction failed (0x10)!
[   33.380007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   33.392005] i2c i2c-1: Transaction failed (0x10)!
[   33.396003] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   33.412004] i2c i2c-1: Transaction failed (0x10)!
[   33.416002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   33.428004] i2c i2c-1: Transaction failed (0x10)!
[   33.432002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   33.444004] i2c i2c-1: Transaction failed (0x10)!
[   33.448002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   33.460004] i2c i2c-1: Transaction failed (0x10)!
[   33.464002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   33.476004] i2c i2c-1: Transaction failed (0x10)!
[   33.480002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   33.492004] i2c i2c-1: Transaction failed (0x10)!
[   33.496002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   33.508004] i2c i2c-1: Transaction failed (0x10)!
[   33.512002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   33.524004] i2c i2c-1: Transaction failed (0x10)!
[   33.528007] initcall sensors_adm1021_init+0x0/0x11 returned 0 after 296875 usecs
[   33.536003] calling  sensors_adm1025_init+0x0/0x11 @ 1
[   33.540004] bus: 'i2c': add driver adm1025
[   33.544057] i2c-core: driver [adm1025] registered
[   33.548005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.564004] i2c i2c-0: Transaction failed (0x10)!
[   33.568002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.580004] i2c i2c-0: Transaction failed (0x10)!
[   33.584002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.596004] i2c i2c-0: Transaction failed (0x10)!
[   33.600007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   33.612004] i2c i2c-1: Transaction failed (0x10)!
[   33.616002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   33.628004] i2c i2c-1: Transaction failed (0x10)!
[   33.632002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.644004] i2c i2c-1: Transaction failed (0x10)!
[   33.648006] initcall sensors_adm1025_init+0x0/0x11 returned 0 after 105468 usecs
[   33.656002] PPS event at 4294900710
[   33.659494] calling  sensors_adm1029_init+0x0/0x11 @ 1
[   33.664004] bus: 'i2c': add driver adm1029
[   33.668055] i2c-core: driver [adm1029] registered
[   33.672005] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[   33.684004] i2c i2c-0: Transaction failed (0x10)!
[   33.688002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   33.700004] i2c i2c-0: Transaction failed (0x10)!
[   33.704002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   33.716004] i2c i2c-0: Transaction failed (0x10)!
[   33.720002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   33.732004] i2c i2c-0: Transaction failed (0x10)!
[   33.736002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.748004] i2c i2c-0: Transaction failed (0x10)!
[   33.752002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.764004] i2c i2c-0: Transaction failed (0x10)!
[   33.768002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.780004] i2c i2c-0: Transaction failed (0x10)!
[   33.784002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   33.796004] i2c i2c-0: Transaction failed (0x10)!
[   33.800007] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[   33.812004] i2c i2c-1: Transaction failed (0x10)!
[   33.816002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   33.828004] i2c i2c-1: Transaction failed (0x10)!
[   33.832002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   33.844004] i2c i2c-1: Transaction failed (0x10)!
[   33.848002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   33.860004] i2c i2c-1: Transaction failed (0x10)!
[   33.864002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   33.876004] i2c i2c-1: Transaction failed (0x10)!
[   33.880002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   33.892004] i2c i2c-1: Transaction failed (0x10)!
[   33.896002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.908004] i2c i2c-1: Transaction failed (0x10)!
[   33.912002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   33.924004] i2c i2c-1: Transaction failed (0x10)!
[   33.928006] initcall sensors_adm1029_init+0x0/0x11 returned 0 after 257812 usecs
[   33.936003] calling  sensors_adm9240_init+0x0/0x11 @ 1
[   33.940004] bus: 'i2c': add driver adm9240
[   33.944065] i2c-core: driver [adm9240] registered
[   33.948006] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.964004] i2c i2c-0: Transaction failed (0x10)!
[   33.968002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.980004] i2c i2c-0: Transaction failed (0x10)!
[   33.984002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.996004] i2c i2c-0: Transaction failed (0x10)!
[   34.000002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   34.012004] i2c i2c-0: Transaction failed (0x10)!
[   34.016007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.028004] i2c i2c-1: Transaction failed (0x10)!
[   34.032002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   34.044004] i2c i2c-1: Transaction failed (0x10)!
[   34.048002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.060004] i2c i2c-1: Transaction failed (0x10)!
[   34.064002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   34.076004] i2c i2c-1: Transaction failed (0x10)!
[   34.080006] initcall sensors_adm9240_init+0x0/0x11 returned 0 after 136718 usecs
[   34.088003] calling  sensors_ads7828_init+0x0/0x4a @ 1
[   34.092004] bus: 'i2c': add driver ads7828
[   34.096055] i2c-core: driver [ads7828] registered
[   34.100005] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   34.116004] i2c i2c-0: Transaction failed (0x10)!
[   34.120002] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   34.132004] i2c i2c-0: Transaction failed (0x10)!
[   34.136002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   34.148004] i2c i2c-0: Transaction failed (0x10)!
[   34.152002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   34.164004] i2c i2c-0: Transaction failed (0x10)!
[   34.168007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   34.180004] i2c i2c-1: Transaction failed (0x10)!
[   34.184002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   34.196004] i2c i2c-1: Transaction failed (0x10)!
[   34.200002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   34.212004] i2c i2c-1: Transaction failed (0x10)!
[   34.216002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   34.228004] i2c i2c-1: Transaction failed (0x10)!
[   34.232006] initcall sensors_ads7828_init+0x0/0x4a returned 0 after 136718 usecs
[   34.240003] calling  adt7462_init+0x0/0x11 @ 1
[   34.244003] bus: 'i2c': add driver adt7462
[   34.248055] i2c-core: driver [adt7462] registered
[   34.252005] i2c i2c-0: found normal entry for adapter 0, addr 0x58
[   34.264004] i2c i2c-0: Transaction failed (0x10)!
[   34.268002] i2c i2c-0: found normal entry for adapter 0, addr 0x5c
[   34.280004] i2c i2c-0: Transaction failed (0x10)!
[   34.284007] i2c i2c-1: found normal entry for adapter 1, addr 0x58
[   34.296004] i2c i2c-1: Transaction failed (0x10)!
[   34.300002] i2c i2c-1: found normal entry for adapter 1, addr 0x5c
[   34.312004] i2c i2c-1: Transaction failed (0x10)!
[   34.316006] initcall adt7462_init+0x0/0x11 returned 0 after 70312 usecs
[   34.320003] calling  adt7470_init+0x0/0x11 @ 1
[   34.324004] bus: 'i2c': add driver adt7470
[   34.328055] i2c-core: driver [adt7470] registered
[   34.336005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   34.348004] i2c i2c-0: Transaction failed (0x10)!
[   34.352002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   34.364004] i2c i2c-0: Transaction failed (0x10)!
[   34.368002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   34.380004] i2c i2c-0: Transaction failed (0x10)!
[   34.384007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.396004] i2c i2c-1: Transaction failed (0x10)!
[   34.400002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.412004] i2c i2c-1: Transaction failed (0x10)!
[   34.416002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   34.428004] i2c i2c-1: Transaction failed (0x10)!
[   34.432006] initcall adt7470_init+0x0/0x11 returned 0 after 105468 usecs
[   34.436003] calling  sensors_adt7475_init+0x0/0x11 @ 1
[   34.444004] bus: 'i2c': add driver adt7475
[   34.448055] i2c-core: driver [adt7475] registered
[   34.452005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   34.464004] i2c i2c-0: Transaction failed (0x10)!
[   34.468002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   34.480004] i2c i2c-0: Transaction failed (0x10)!
[   34.484003] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   34.496004] i2c i2c-0: Transaction failed (0x10)!
[   34.500007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.512004] i2c i2c-1: Transaction failed (0x10)!
[   34.516002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   34.528004] i2c i2c-1: Transaction failed (0x10)!
[   34.532002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.544004] i2c i2c-1: Transaction failed (0x10)!
[   34.548006] initcall sensors_adt7475_init+0x0/0x11 returned 0 after 101562 usecs
[   34.556003] calling  applesmc_init+0x0/0x47a @ 1
[   34.560011] applesmc: supported laptop not found!
[   34.564002] applesmc: driver init failed (ret=-19)!
[   34.568003] initcall applesmc_init+0x0/0x47a returned -19 after 7812 usecs
[   34.576003] calling  atxp1_init+0x0/0x11 @ 1
[   34.580004] bus: 'i2c': add driver atxp1
[   34.584055] i2c-core: driver [atxp1] registered
[   34.588005] i2c i2c-0: found normal entry for adapter 0, addr 0x37
[   34.604004] i2c i2c-0: Transaction failed (0x10)!
[   34.608002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   34.620004] i2c i2c-0: Transaction failed (0x10)!
[   34.624007] i2c i2c-1: found normal entry for adapter 1, addr 0x37
[   34.636004] i2c i2c-1: Transaction failed (0x10)!
[   34.640002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   34.652004] i2c i2c-1: Transaction failed (0x10)!
[   34.656001] PPS event at 4294900960
[   34.660007] initcall atxp1_init+0x0/0x11 returned 0 after 78125 usecs
[   34.664004] calling  dme1737_init+0x0/0x139 @ 1
[   34.668003] bus: 'i2c': add driver dme1737
[   34.672056] i2c-core: driver [dme1737] registered
[   34.680005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   34.692004] i2c i2c-0: Transaction failed (0x10)!
[   34.696002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   34.708004] i2c i2c-0: Transaction failed (0x10)!
[   34.712002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   34.724004] i2c i2c-0: Transaction failed (0x10)!
[   34.728007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.740004] i2c i2c-1: Transaction failed (0x10)!
[   34.744002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   34.756004] i2c i2c-1: Transaction failed (0x10)!
[   34.760002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.772004] i2c i2c-1: Transaction failed (0x10)!
[   34.776020] initcall dme1737_init+0x0/0x139 returned 0 after 105468 usecs
[   34.780003] calling  sensor_emc1403_init+0x0/0x11 @ 1
[   34.788004] bus: 'i2c': add driver emc1403
[   34.792055] i2c-core: driver [emc1403] registered
[   34.796005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   34.808004] i2c i2c-0: Transaction failed (0x10)!
[   34.812002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   34.824004] i2c i2c-0: Transaction failed (0x10)!
[   34.828002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   34.840004] i2c i2c-0: Transaction failed (0x10)!
[   34.844002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   34.856004] i2c i2c-0: Transaction failed (0x10)!
[   34.860007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   34.872004] i2c i2c-1: Transaction failed (0x10)!
[   34.876002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   34.888004] i2c i2c-1: Transaction failed (0x10)!
[   34.892002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   34.904004] i2c i2c-1: Transaction failed (0x10)!
[   34.908002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   34.920004] i2c i2c-1: Transaction failed (0x10)!
[   34.924006] initcall sensor_emc1403_init+0x0/0x11 returned 0 after 132812 usecs
[   34.932003] calling  f71805f_init+0x0/0x111 @ 1
[   34.936027] initcall f71805f_init+0x0/0x111 returned -19 after 0 usecs
[   34.940003] calling  f71882fg_init+0x0/0x102 @ 1
[   34.944012] f71882fg: Not a Fintek device
[   34.948016] f71882fg: Not a Fintek device
[   34.952008] initcall f71882fg_init+0x0/0x102 returned -19 after 7812 usecs
[   34.960003] calling  sensors_f75375_init+0x0/0x11 @ 1
[   34.964004] bus: 'i2c': add driver f75375
[   34.968055] i2c-core: driver [f75375] registered
[   34.976005] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   34.988004] i2c i2c-0: Transaction failed (0x10)!
[   34.992002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   35.004004] i2c i2c-0: Transaction failed (0x10)!
[   35.008007] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   35.020004] i2c i2c-1: Transaction failed (0x10)!
[   35.024002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   35.036004] i2c i2c-1: Transaction failed (0x10)!
[   35.040006] initcall sensors_f75375_init+0x0/0x11 returned 0 after 74218 usecs
[   35.048003] calling  fschmd_init+0x0/0x11 @ 1
[   35.052004] bus: 'i2c': add driver fschmd
[   35.056065] i2c-core: driver [fschmd] registered
[   35.060006] i2c i2c-0: found normal entry for adapter 0, addr 0x73
[   35.072004] i2c i2c-0: Transaction failed (0x10)!
[   35.076007] i2c i2c-1: found normal entry for adapter 1, addr 0x73
[   35.088004] i2c i2c-1: Transaction failed (0x10)!
[   35.092006] initcall fschmd_init+0x0/0x11 returned 0 after 39062 usecs
[   35.096003] calling  g760a_init+0x0/0x11 @ 1
[   35.100004] bus: 'i2c': add driver g760a
[   35.104065] i2c-core: driver [g760a] registered
[   35.112005] initcall g760a_init+0x0/0x11 returned 0 after 11718 usecs
[   35.116003] calling  sensors_gl518sm_init+0x0/0x11 @ 1
[   35.120004] bus: 'i2c': add driver gl518sm
[   35.124055] i2c-core: driver [gl518sm] registered
[   35.132006] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   35.144004] i2c i2c-0: Transaction failed (0x10)!
[   35.148002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   35.160004] i2c i2c-0: Transaction failed (0x10)!
[   35.164007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   35.176004] i2c i2c-1: Transaction failed (0x10)!
[   35.180002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   35.192004] i2c i2c-1: Transaction failed (0x10)!
[   35.196006] initcall sensors_gl518sm_init+0x0/0x11 returned 0 after 74218 usecs
[   35.204003] calling  i5k_amb_init+0x0/0x52 @ 1
[   35.208006] bus: 'platform': add driver i5k_amb
[   35.212063] Registering platform device 'i5k_amb.0'. Parent at platform
[   35.216003] device: 'i5k_amb.0': device_add
[   35.220007] bus: 'platform': add device i5k_amb.0
[   35.228014] PM: Adding info for platform:i5k_amb.0
[   35.232066] bus: 'platform': driver_probe_device: matched device i5k_amb.0 with driver i5k_amb
[   35.240002] bus: 'platform': really_probe: probing driver i5k_amb with device i5k_amb.0
[   35.248032] initcall i5k_amb_init+0x0/0x52 returned 0 after 39062 usecs
[   35.256004] calling  sm_it87_init+0x0/0x34a @ 1
[   35.260031] it87: Found IT8712F chip at 0x290, revision 7
[   35.264008] it87: VID is disabled (pins used for GPIO)
[   35.268007] it87: in3 is VCC (+5V)
[   35.272001] it87: in7 is VCCH (+5V Stand-By)
[   35.276011] bus: 'platform': add driver it87
[   35.280079] Registering platform device 'it87.656'. Parent at platform
[   35.288003] device: 'it87.656': device_add
[   35.292006] bus: 'platform': add device it87.656
[   35.296012] PM: Adding info for platform:it87.656
[   35.300056] bus: 'platform': driver_probe_device: matched device it87.656 with driver it87
[   35.312002] bus: 'platform': really_probe: probing driver it87 with device it87.656
[   35.316017] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
[   35.324222] device: 'hwmon0': device_add
[   35.328017] PM: Adding info for No Bus:hwmon0
[   35.332053] driver: 'it87.656': driver_bound: bound to device 'it87'
[   35.340002] bus: 'platform': really_probe: bound device it87.656 to driver it87
[   35.348005] initcall sm_it87_init+0x0/0x34a returned 0 after 85937 usecs
[   35.356004] calling  k8temp_init+0x0/0x16 @ 1
[   35.360016] bus: 'pci': add driver k8temp
[   35.364024] bus: 'pci': driver_probe_device: matched device 0000:00:18.3 with driver k8temp
[   35.372002] bus: 'pci': really_probe: probing driver k8temp with device 0000:00:18.3
[   35.380058] device: 'hwmon1': device_add
[   35.384029] PM: Adding info for No Bus:hwmon1
[   35.388053] driver: '0000:00:18.3': driver_bound: bound to device 'k8temp'
[   35.396003] bus: 'pci': really_probe: bound device 0000:00:18.3 to driver k8temp
[   35.400056] initcall k8temp_init+0x0/0x16 returned 0 after 39062 usecs
[   35.408003] calling  k10temp_init+0x0/0x16 @ 1
[   35.412014] bus: 'pci': add driver k10temp
[   35.416066] initcall k10temp_init+0x0/0x16 returned 0 after 3906 usecs
[   35.424003] calling  lis3lv02d_init+0x0/0x11 @ 1
[   35.428004] bus: 'i2c': add driver lis3lv02d_i2c
[   35.432065] i2c-core: driver [lis3lv02d_i2c] registered
[   35.436005] initcall lis3lv02d_init+0x0/0x11 returned 0 after 7812 usecs
[   35.444003] calling  sensors_lm73_init+0x0/0x11 @ 1
[   35.448004] bus: 'i2c': add driver lm73
[   35.452055] i2c-core: driver [lm73] registered
[   35.456005] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   35.472004] i2c i2c-0: Transaction failed (0x10)!
[   35.476002] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   35.488004] i2c i2c-0: Transaction failed (0x10)!
[   35.492002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   35.504003] i2c i2c-0: Transaction failed (0x10)!
[   35.508002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   35.520004] i2c i2c-0: Transaction failed (0x10)!
[   35.524002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   35.536003] i2c i2c-0: Transaction failed (0x10)!
[   35.540002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   35.552003] i2c i2c-0: Transaction failed (0x10)!
[   35.556007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   35.568004] i2c i2c-1: Transaction failed (0x10)!
[   35.572002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   35.584003] i2c i2c-1: Transaction failed (0x10)!
[   35.588002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   35.600003] i2c i2c-1: Transaction failed (0x10)!
[   35.604002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   35.608004] CPA self-test:
[   35.616004] i2c i2c-1: Transaction failed (0x10)!
[   35.616996]  4k 262128 large 0 gb 0 x 262128[40000000-7ffef000] miss 0
[   35.624004] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   35.640005] i2c i2c-1: Transaction failed (0x10)!
[   35.640571]  4k 262128 large 0 gb 0 x 262128[40000000-7ffef000] miss 0
[   35.648003] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   35.660002] PPS event at 4294901211
[   35.664006] i2c i2c-1: Transaction failed (0x10)!
[   35.668009] initcall sensors_lm73_init+0x0/0x11 returned 0 after 214843 usecs
[   35.672004] calling  sensors_lm75_init+0x0/0x11 @ 1
[   35.680005] bus: 'i2c': add driver lm75
[   35.684067] i2c-core: driver [lm75] registered
[   35.688006] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   35.698803]  4k 262128 large 0 gb 0 x 262128[40000000-7ffef000] miss 0
[   35.700002] ok.
[   35.704006] i2c i2c-0: Transaction failed (0x10)!
[   35.708003] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   35.720003] i2c i2c-0: Transaction failed (0x10)!
[   35.724002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   35.736003] i2c i2c-0: Transaction failed (0x10)!
[   35.740002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   35.752003] i2c i2c-0: Transaction failed (0x10)!
[   35.756002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   35.768004] i2c i2c-0: Transaction failed (0x10)!
[   35.772002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   35.784003] i2c i2c-0: Transaction failed (0x10)!
[   35.788002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   35.800003] i2c i2c-0: Transaction failed (0x10)!
[   35.804004] i2c i2c-0: found normal entry for adapter 0, addr 0x4f
[   35.816004] i2c i2c-0: Transaction failed (0x10)!
[   35.820007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   35.832004] i2c i2c-1: Transaction failed (0x10)!
[   35.836002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   35.848003] i2c i2c-1: Transaction failed (0x10)!
[   35.852002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   35.864003] i2c i2c-1: Transaction failed (0x10)!
[   35.868002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   35.880003] i2c i2c-1: Transaction failed (0x10)!
[   35.884002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   35.896003] i2c i2c-1: Transaction failed (0x10)!
[   35.900002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   35.912003] i2c i2c-1: Transaction failed (0x10)!
[   35.916002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   35.928003] i2c i2c-1: Transaction failed (0x10)!
[   35.932002] i2c i2c-1: found normal entry for adapter 1, addr 0x4f
[   35.944003] i2c i2c-1: Transaction failed (0x10)!
[   35.948006] initcall sensors_lm75_init+0x0/0x11 returned 0 after 261718 usecs
[   35.952003] calling  sm_lm78_init+0x0/0x320 @ 1
[   35.960009] lm78: Failed to request port 0x295
[   35.964017] bus: 'i2c': add driver lm78
[   35.968056] i2c-core: driver [lm78] registered
[   35.972005] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[   35.984004] i2c i2c-0: Transaction failed (0x10)!
[   35.988002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   36.000003] i2c i2c-0: Transaction failed (0x10)!
[   36.004002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.016003] i2c i2c-0: Transaction failed (0x10)!
[   36.020002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.032004] i2c i2c-0: Transaction failed (0x10)!
[   36.036002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   36.048003] i2c i2c-0: Transaction failed (0x10)!
[   36.052002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   36.064003] i2c i2c-0: Transaction failed (0x10)!
[   36.068002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   36.080003] i2c i2c-0: Transaction failed (0x10)!
[   36.084002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   36.096003] i2c i2c-0: Transaction failed (0x10)!
[   36.100007] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[   36.112004] i2c i2c-1: Transaction failed (0x10)!
[   36.116002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   36.128003] i2c i2c-1: Transaction failed (0x10)!
[   36.132002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   36.144003] i2c i2c-1: Transaction failed (0x10)!
[   36.148002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   36.160003] i2c i2c-1: Transaction failed (0x10)!
[   36.164002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   36.176003] i2c i2c-1: Transaction failed (0x10)!
[   36.180002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   36.192003] i2c i2c-1: Transaction failed (0x10)!
[   36.196002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   36.208003] i2c i2c-1: Transaction failed (0x10)!
[   36.212002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   36.224003] i2c i2c-1: Transaction failed (0x10)!
[   36.228006] initcall sm_lm78_init+0x0/0x320 returned 0 after 261718 usecs
[   36.232003] calling  sensors_lm83_init+0x0/0x11 @ 1
[   36.240004] bus: 'i2c': add driver lm83
[   36.244055] i2c-core: driver [lm83] registered
[   36.248005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   36.260004] i2c i2c-0: Transaction failed (0x10)!
[   36.264002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   36.276003] i2c i2c-0: Transaction failed (0x10)!
[   36.280003] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   36.292004] i2c i2c-0: Transaction failed (0x10)!
[   36.296002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   36.308004] i2c i2c-0: Transaction failed (0x10)!
[   36.312002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.324004] i2c i2c-0: Transaction failed (0x10)!
[   36.328002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.340004] i2c i2c-0: Transaction failed (0x10)!
[   36.344002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   36.356004] i2c i2c-0: Transaction failed (0x10)!
[   36.360002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   36.372004] i2c i2c-0: Transaction failed (0x10)!
[   36.376002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   36.388004] i2c i2c-0: Transaction failed (0x10)!
[   36.392007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   36.404004] i2c i2c-1: Transaction failed (0x10)!
[   36.408002] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   36.420004] i2c i2c-1: Transaction failed (0x10)!
[   36.424002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   36.436004] i2c i2c-1: Transaction failed (0x10)!
[   36.440002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   36.452004] i2c i2c-1: Transaction failed (0x10)!
[   36.456002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   36.468004] i2c i2c-1: Transaction failed (0x10)!
[   36.472002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   36.484004] i2c i2c-1: Transaction failed (0x10)!
[   36.488002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   36.500004] i2c i2c-1: Transaction failed (0x10)!
[   36.504002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   36.516004] i2c i2c-1: Transaction failed (0x10)!
[   36.520002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   36.532004] i2c i2c-1: Transaction failed (0x10)!
[   36.536007] initcall sensors_lm83_init+0x0/0x11 returned 0 after 289062 usecs
[   36.540003] calling  sensors_lm87_init+0x0/0x11 @ 1
[   36.548004] bus: 'i2c': add driver lm87
[   36.552054] i2c-core: driver [lm87] registered
[   36.556005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   36.568004] i2c i2c-0: Transaction failed (0x10)!
[   36.572002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   36.584004] i2c i2c-0: Transaction failed (0x10)!
[   36.588002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   36.600004] i2c i2c-0: Transaction failed (0x10)!
[   36.604007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   36.616004] i2c i2c-1: Transaction failed (0x10)!
[   36.620002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   36.632004] i2c i2c-1: Transaction failed (0x10)!
[   36.636002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   36.648004] i2c i2c-1: Transaction failed (0x10)!
[   36.652006] initcall sensors_lm87_init+0x0/0x11 returned 0 after 101562 usecs
[   36.656003] calling  sensors_lm95241_init+0x0/0x11 @ 1
[   36.664001] PPS event at 4294901462
[   36.668006] bus: 'i2c': add driver lm95241
[   36.672055] i2c-core: driver [lm95241] registered
[   36.676005] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   36.688004] i2c i2c-0: Transaction failed (0x10)!
[   36.692002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.704004] i2c i2c-0: Transaction failed (0x10)!
[   36.708002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.720004] i2c i2c-0: Transaction failed (0x10)!
[   36.724007] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   36.736004] i2c i2c-1: Transaction failed (0x10)!
[   36.740002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   36.752004] i2c i2c-1: Transaction failed (0x10)!
[   36.756002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   36.768004] i2c i2c-1: Transaction failed (0x10)!
[   36.772006] initcall sensors_lm95241_init+0x0/0x11 returned 0 after 101562 usecs
[   36.780003] calling  ltc4215_init+0x0/0x11 @ 1
[   36.784004] bus: 'i2c': add driver ltc4215
[   36.788055] i2c-core: driver [ltc4215] registered
[   36.792005] initcall ltc4215_init+0x0/0x11 returned 0 after 7812 usecs
[   36.800003] calling  sensors_max1619_init+0x0/0x11 @ 1
[   36.804006] bus: 'i2c': add driver max1619
[   36.808058] i2c-core: driver [max1619] registered
[   36.812005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   36.828004] i2c i2c-0: Transaction failed (0x10)!
[   36.832002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   36.844003] i2c i2c-0: Transaction failed (0x10)!
[   36.848002] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   36.860003] i2c i2c-0: Transaction failed (0x10)!
[   36.864002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   36.876003] i2c i2c-0: Transaction failed (0x10)!
[   36.880002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.892003] i2c i2c-0: Transaction failed (0x10)!
[   36.896002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.908003] i2c i2c-0: Transaction failed (0x10)!
[   36.912002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   36.924003] i2c i2c-0: Transaction failed (0x10)!
[   36.928002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   36.940003] i2c i2c-0: Transaction failed (0x10)!
[   36.944002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   36.956003] i2c i2c-0: Transaction failed (0x10)!
[   36.960007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   36.972004] i2c i2c-1: Transaction failed (0x10)!
[   36.976002] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   36.988003] i2c i2c-1: Transaction failed (0x10)!
[   36.992002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   37.004003] i2c i2c-1: Transaction failed (0x10)!
[   37.008002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   37.020003] i2c i2c-1: Transaction failed (0x10)!
[   37.024002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   37.036003] i2c i2c-1: Transaction failed (0x10)!
[   37.040002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   37.052004] i2c i2c-1: Transaction failed (0x10)!
[   37.056003] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   37.068004] i2c i2c-1: Transaction failed (0x10)!
[   37.072002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   37.084003] i2c i2c-1: Transaction failed (0x10)!
[   37.088002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   37.100003] i2c i2c-1: Transaction failed (0x10)!
[   37.104006] initcall sensors_max1619_init+0x0/0x11 returned 0 after 292968 usecs
[   37.112003] calling  sensors_max6650_init+0x0/0x11 @ 1
[   37.116004] bus: 'i2c': add driver max6650
[   37.120055] i2c-core: driver [max6650] registered
[   37.124005] i2c i2c-0: found normal entry for adapter 0, addr 0x1b
[   37.140004] i2c i2c-0: Transaction failed (0x10)!
[   37.144002] i2c i2c-0: found normal entry for adapter 0, addr 0x1f
[   37.156003] i2c i2c-0: Transaction failed (0x10)!
[   37.160002] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   37.172003] i2c i2c-0: Transaction failed (0x10)!
[   37.176002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   37.188003] i2c i2c-0: Transaction failed (0x10)!
[   37.192007] i2c i2c-1: found normal entry for adapter 1, addr 0x1b
[   37.204004] i2c i2c-1: Transaction failed (0x10)!
[   37.208002] i2c i2c-1: found normal entry for adapter 1, addr 0x1f
[   37.220003] i2c i2c-1: Transaction failed (0x10)!
[   37.224002] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   37.236003] i2c i2c-1: Transaction failed (0x10)!
[   37.240002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   37.252003] i2c i2c-1: Transaction failed (0x10)!
[   37.256006] initcall sensors_max6650_init+0x0/0x11 returned 0 after 136718 usecs
[   37.264003] calling  pc87360_init+0x0/0x13c @ 1
[   37.268015] pc87360: PC8736x not detected, module not inserted.
[   37.272003] initcall pc87360_init+0x0/0x13c returned -19 after 3906 usecs
[   37.280003] calling  pcf8591_init+0x0/0x32 @ 1
[   37.284004] bus: 'i2c': add driver pcf8591
[   37.288055] i2c-core: driver [pcf8591] registered
[   37.292005] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   37.308004] i2c i2c-0: Transaction failed (0x10)!
[   37.312002] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   37.324004] i2c i2c-0: Transaction failed (0x10)!
[   37.328002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   37.340003] i2c i2c-0: Transaction failed (0x10)!
[   37.344002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   37.356003] i2c i2c-0: Transaction failed (0x10)!
[   37.360002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   37.372003] i2c i2c-0: Transaction failed (0x10)!
[   37.376002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   37.388003] i2c i2c-0: Transaction failed (0x10)!
[   37.392002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   37.404003] i2c i2c-0: Transaction failed (0x10)!
[   37.408002] i2c i2c-0: found normal entry for adapter 0, addr 0x4f
[   37.420003] i2c i2c-0: Transaction failed (0x10)!
[   37.424007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   37.436004] i2c i2c-1: Transaction failed (0x10)!
[   37.440002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   37.452003] i2c i2c-1: Transaction failed (0x10)!
[   37.456002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   37.468003] i2c i2c-1: Transaction failed (0x10)!
[   37.472002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   37.484003] i2c i2c-1: Transaction failed (0x10)!
[   37.488002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   37.500003] i2c i2c-1: Transaction failed (0x10)!
[   37.504002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   37.516003] i2c i2c-1: Transaction failed (0x10)!
[   37.520002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   37.532003] i2c i2c-1: Transaction failed (0x10)!
[   37.536002] i2c i2c-1: found normal entry for adapter 1, addr 0x4f
[   37.548003] i2c i2c-1: Transaction failed (0x10)!
[   37.552006] initcall pcf8591_init+0x0/0x32 returned 0 after 261718 usecs
[   37.556003] calling  sht15_init+0x0/0x4a @ 1
[   37.560005] bus: 'platform': add driver sht10
[   37.568071] bus: 'platform': add driver sht11
[   37.572059] bus: 'platform': add driver sht15
[   37.576058] bus: 'platform': add driver sht71
[   37.580058] bus: 'platform': add driver sht75
[   37.584058] initcall sht15_init+0x0/0x4a returned 0 after 23437 usecs
[   37.592003] calling  sm_sis5595_init+0x0/0x16 @ 1
[   37.596014] bus: 'pci': add driver sis5595
[   37.600077] initcall sm_sis5595_init+0x0/0x16 returned 0 after 3906 usecs
[   37.604004] calling  smsc47b397_init+0x0/0x147 @ 1
[   37.612010] initcall smsc47b397_init+0x0/0x147 returned -19 after 0 usecs
[   37.616003] calling  sm_smsc47m1_init+0x0/0x21f @ 1
[   37.624010] initcall sm_smsc47m1_init+0x0/0x21f returned -19 after 0 usecs
[   37.628003] calling  smsc47m192_init+0x0/0x11 @ 1
[   37.636005] bus: 'i2c': add driver smsc47m192
[   37.640055] i2c-core: driver [smsc47m192] registered
[   37.644005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   37.656004] i2c i2c-0: Transaction failed (0x10)!
[   37.660002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   37.668001] PPS event at 4294901713
[   37.672004] i2c i2c-0: Transaction failed (0x10)!
[   37.676007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   37.688004] i2c i2c-1: Transaction failed (0x10)!
[   37.692002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   37.704004] i2c i2c-1: Transaction failed (0x10)!
[   37.708006] initcall smsc47m192_init+0x0/0x11 returned 0 after 70312 usecs
[   37.712003] calling  amc6821_init+0x0/0x11 @ 1
[   37.720004] bus: 'i2c': add driver amc6821
[   37.724055] i2c-core: driver [amc6821] registered
[   37.728005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   37.740004] i2c i2c-0: Transaction failed (0x10)!
[   37.744002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   37.756004] i2c i2c-0: Transaction failed (0x10)!
[   37.760002] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   37.772004] i2c i2c-0: Transaction failed (0x10)!
[   37.776002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   37.788004] i2c i2c-0: Transaction failed (0x10)!
[   37.792002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   37.804007] i2c i2c-0: Transaction failed (0x10)!
[   37.808002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   37.820004] i2c i2c-0: Transaction failed (0x10)!
[   37.824003] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   37.836004] i2c i2c-0: Transaction failed (0x10)!
[   37.840002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   37.852004] i2c i2c-0: Transaction failed (0x10)!
[   37.856002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   37.868003] i2c i2c-0: Transaction failed (0x10)!
[   37.872007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   37.884004] i2c i2c-1: Transaction failed (0x10)!
[   37.888002] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   37.900003] i2c i2c-1: Transaction failed (0x10)!
[   37.904002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   37.916004] i2c i2c-1: Transaction failed (0x10)!
[   37.920002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   37.932003] i2c i2c-1: Transaction failed (0x10)!
[   37.936002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   37.948003] i2c i2c-1: Transaction failed (0x10)!
[   37.952002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   37.964003] i2c i2c-1: Transaction failed (0x10)!
[   37.968002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   37.980003] i2c i2c-1: Transaction failed (0x10)!
[   37.984002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   37.996003] i2c i2c-1: Transaction failed (0x10)!
[   38.000002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   38.012003] i2c i2c-1: Transaction failed (0x10)!
[   38.016006] initcall amc6821_init+0x0/0x11 returned 0 after 289062 usecs
[   38.020003] calling  tmp102_init+0x0/0x11 @ 1
[   38.024004] bus: 'i2c': add driver tmp102
[   38.028055] i2c-core: driver [tmp102] registered
[   38.036004] initcall tmp102_init+0x0/0x11 returned 0 after 11718 usecs
[   38.040003] calling  via_cputemp_init+0x0/0x13f @ 1
[   38.044002] via_cputemp: Not a VIA CPU
[   38.048003] initcall via_cputemp_init+0x0/0x13f returned -19 after 3906 usecs
[   38.056003] calling  sm_vt8231_init+0x0/0x16 @ 1
[   38.060014] bus: 'pci': add driver vt8231
[   38.064075] initcall sm_vt8231_init+0x0/0x16 returned 0 after 3906 usecs
[   38.072004] calling  sensors_w83l785ts_init+0x0/0x11 @ 1
[   38.076005] bus: 'i2c': add driver w83l785ts
[   38.080057] i2c-core: driver [w83l785ts] registered
[   38.088005] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   38.100004] i2c i2c-0: Transaction failed (0x10)!
[   38.104007] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   38.116004] i2c i2c-1: Transaction failed (0x10)!
[   38.120006] initcall sensors_w83l785ts_init+0x0/0x11 returned 0 after 42968 usecs
[   38.128004] calling  sensors_w83l786ng_init+0x0/0x11 @ 1
[   38.132004] bus: 'i2c': add driver w83l786ng
[   38.136055] i2c-core: driver [w83l786ng] registered
[   38.140005] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   38.156004] i2c i2c-0: Transaction failed (0x10)!
[   38.160002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   38.172003] i2c i2c-0: Transaction failed (0x10)!
[   38.176007] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   38.188004] i2c i2c-1: Transaction failed (0x10)!
[   38.192002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   38.204003] i2c i2c-1: Transaction failed (0x10)!
[   38.208006] initcall sensors_w83l786ng_init+0x0/0x11 returned 0 after 74218 usecs
[   38.216003] calling  wm831x_hwmon_init+0x0/0xf @ 1
[   38.220006] bus: 'platform': add driver wm831x-hwmon
[   38.224059] initcall wm831x_hwmon_init+0x0/0xf returned 0 after 3906 usecs
[   38.232003] calling  pcwd_init_module+0x0/0x14 @ 1
[   38.236003] bus: 'isa': add driver pcwd
[   38.240063] device: 'pcwd.0': device_add
[   38.244008] bus: 'isa': add device pcwd.0
[   38.248013] PM: Adding info for isa:pcwd.0
[   38.252053] device: 'pcwd.0': device_unregister
[   38.256002] PM: Removing info for isa:pcwd.0
[   38.260022] bus: 'isa': remove device pcwd.0
[   38.264059] device: 'pcwd.1': device_add
[   38.268006] bus: 'isa': add device pcwd.1
[   38.272011] PM: Adding info for isa:pcwd.1
[   38.276051] device: 'pcwd.1': device_unregister
[   38.280002] PM: Removing info for isa:pcwd.1
[   38.284020] bus: 'isa': remove device pcwd.1
[   38.292039] device: 'pcwd.2': device_add
[   38.295957] bus: 'isa': add device pcwd.2
[   38.300011] PM: Adding info for isa:pcwd.2
[   38.304052] device: 'pcwd.2': device_unregister
[   38.308002] PM: Removing info for isa:pcwd.2
[   38.312020] bus: 'isa': remove device pcwd.2
[   38.316062] bus: 'isa': remove driver pcwd
[   38.320050] driver: 'pcwd': driver_release
[   38.324007] initcall pcwd_init_module+0x0/0x14 returned -19 after 85937 usecs
[   38.332003] calling  mixcomwd_init+0x0/0xf7 @ 1
[   38.336086] mixcomwd: No card detected, or port not available.
[   38.340004] initcall mixcomwd_init+0x0/0xf7 returned -19 after 3906 usecs
[   38.348003] calling  wdtpci_init+0x0/0x16 @ 1
[   38.352014] bus: 'pci': add driver wdt_pci
[   38.356068] initcall wdtpci_init+0x0/0x16 returned 0 after 3906 usecs
[   38.364003] calling  usb_pcwd_init+0x0/0x3c @ 1
[   38.368009] bus: 'usb': add driver pcwd_usb
[   38.372065] usbcore: registered new interface driver pcwd_usb
[   38.376002] pcwd_usb: Berkshire USB-PC Watchdog driver v1.02
[   38.384004] initcall usb_pcwd_init+0x0/0x3c returned 0 after 15625 usecs
[   38.388003] calling  acq_init+0x0/0x50 @ 1
[   38.392002] WDT driver for Acquire single board computer initialising.
[   38.400006] bus: 'platform': add driver acquirewdt
[   38.404060] Registering platform device 'acquirewdt'. Parent at platform
[   38.412003] device: 'acquirewdt': device_add
[   38.416006] bus: 'platform': add device acquirewdt
[   38.420013] PM: Adding info for platform:acquirewdt
[   38.424058] bus: 'platform': driver_probe_device: matched device acquirewdt with driver acquirewdt
[   38.436002] bus: 'platform': really_probe: probing driver acquirewdt with device acquirewdt
[   38.444010] acquirewdt: I/O address 0x0043 already in use
[   38.448009] acquirewdt: probe of acquirewdt failed with error -5
[   38.456004] initcall acq_init+0x0/0x50 returned 0 after 62500 usecs
[   38.460003] calling  watchdog_init+0x0/0x146 @ 1
[   38.464014] initcall watchdog_init+0x0/0x146 returned -19 after 0 usecs
[   38.472003] calling  geodewdt_init+0x0/0x45 @ 1
[   38.476005] bus: 'platform': add driver geodewdt
[   38.480060] Registering platform device 'geodewdt'. Parent at platform
[   38.488003] device: 'geodewdt': device_add
[   38.492015] bus: 'platform': add device geodewdt
[   38.496013] PM: Adding info for platform:geodewdt
[   38.500057] bus: 'platform': driver_probe_device: matched device geodewdt with driver geodewdt
[   38.512002] bus: 'platform': really_probe: probing driver geodewdt with device geodewdt
[   38.520006] geodewdt:  No timers were available
[   38.524014] initcall geodewdt_init+0x0/0x45 returned 0 after 46875 usecs
[   38.528003] calling  sc520_wdt_init+0x0/0xd0 @ 1
[   38.532020] device: 'watchdog': device_add
[   38.540139] PM: Adding info for No Bus:watchdog
[   38.544053] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=1)
[   38.552005] initcall sc520_wdt_init+0x0/0xd0 returned 0 after 19531 usecs
[   38.556003] calling  ibmasr_init+0x0/0x235 @ 1
[   38.560004] initcall ibmasr_init+0x0/0x235 returned -19 after 0 usecs
[   38.568003] calling  wafwdt_init+0x0/0x141 @ 1
[   38.572002] WDT driver for Wafer 5823 single board computer initialising.
[   38.580005] Wafer 5823 WDT: cannot register miscdev on minor=130 (err=-16)
[   38.588009] initcall wafwdt_init+0x0/0x141 returned -16 after 15625 usecs
[   38.592006] initcall wafwdt_init+0x0/0x141 returned with error code -16 
[   38.600003] calling  watchdog_init+0x0/0x16 @ 1
[   38.604017] bus: 'pci': add driver i6300ESB timer
[   38.608078] initcall watchdog_init+0x0/0x16 returned 0 after 3906 usecs
[   38.616004] calling  iTCO_wdt_init_module+0x0/0x56 @ 1
[   38.620002] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   38.628006] bus: 'platform': add driver iTCO_wdt
[   38.632065] Registering platform device 'iTCO_wdt'. Parent at platform
[   38.636003] device: 'iTCO_wdt': device_add
[   38.640006] bus: 'platform': add device iTCO_wdt
[   38.648013] PM: Adding info for platform:iTCO_wdt
[   38.652064] bus: 'platform': driver_probe_device: matched device iTCO_wdt with driver iTCO_wdt
[   38.660002] bus: 'platform': really_probe: probing driver iTCO_wdt with device iTCO_wdt
[   38.668002] PPS event at 4294901963
[   38.672094] iTCO_wdt: No card detected
[   38.676011] initcall iTCO_wdt_init_module+0x0/0x56 returned 0 after 54687 usecs
[   38.684003] calling  iTCO_vendor_init_module+0x0/0x17 @ 1
[   38.688002] iTCO_vendor_support: vendor-support=0
[   38.692004] initcall iTCO_vendor_init_module+0x0/0x17 returned 0 after 3906 usecs
[   38.700003] calling  it87_wdt_init+0x0/0x460 @ 1
[   38.704021] IT87 WDT: Unsupported Chip found, Chip 8712 Revision 07
[   38.712004] initcall it87_wdt_init+0x0/0x460 returned -19 after 7812 usecs
[   38.716003] calling  hpwdt_init+0x0/0x16 @ 1
[   38.724014] bus: 'pci': add driver hpwdt
[   38.727931] initcall hpwdt_init+0x0/0x16 returned 0 after 3906 usecs
[   38.732003] calling  scx200_wdt_init+0x0/0xd9 @ 1
[   38.736002] scx200_wdt: NatSemi SCx200 Watchdog Driver
[   38.744004] initcall scx200_wdt_init+0x0/0xd9 returned -19 after 7812 usecs
[   38.748003] calling  sbc60xxwdt_init+0x0/0x15a @ 1
[   38.752004] sbc60xxwdt: cannot register miscdev on minor=130 (err=-16)
[   38.760006] initcall sbc60xxwdt_init+0x0/0x15a returned -16 after 7812 usecs
[   38.768004] initcall sbc60xxwdt_init+0x0/0x15a returned with error code -16 
[   38.776003] calling  sbc7240_wdt_init+0x0/0xf6 @ 1
[   38.780003] sbc7240_wdt: timeout set to 30 seconds
[   38.784003] sbc7240_wdt: cannot register miscdev on minor=130 (err=-16)
[   38.792006] initcall sbc7240_wdt_init+0x0/0xf6 returned -16 after 11718 usecs
[   38.796004] initcall sbc7240_wdt_init+0x0/0xf6 returned with error code -16 
[   38.804008] calling  sch311x_wdt_init+0x0/0x12b @ 1
[   38.808022] initcall sch311x_wdt_init+0x0/0x12b returned -19 after 0 usecs
[   38.816003] calling  wb_smsc_wdt_init+0x0/0x184 @ 1
[   38.820003] SMsC 37B787 watchdog component driver 1.1 initialising...
[   38.829023] smsc37b787_wdt: Unable to register miscdev on minor 130
[   38.832011] initcall wb_smsc_wdt_init+0x0/0x184 returned -16 after 11718 usecs
[   38.836004] initcall wb_smsc_wdt_init+0x0/0x184 returned with error code -16 
[   38.840004] calling  wdt_init+0x0/0x1b5 @ 1
[   38.844003] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.
[   38.848020] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec
[   38.852016] w83627hf/thf/hg WDT: cannot register miscdev on minor=130 (err=-16)
[   38.856007] initcall wdt_init+0x0/0x1b5 returned -16 after 11718 usecs
[   38.860003] initcall wdt_init+0x0/0x1b5 returned with error code -16 
[   38.864004] calling  w83977f_wdt_init+0x0/0x126 @ 1
[   38.868002] W83977F WDT: W83977F WDT driver, v1.00
[   38.872004] W83977F WDT: cannot register miscdev on minor=130 (err=-16)
[   38.876006] initcall w83977f_wdt_init+0x0/0x126 returned -16 after 7812 usecs
[   38.880004] initcall w83977f_wdt_init+0x0/0x126 returned with error code -16 
[   38.884003] calling  zf_init+0x0/0x142 @ 1
[   38.888002] machzwd: MachZ ZF-Logic Watchdog driver initializing.
[   38.892004] machzwd: no ZF-Logic found
[   38.896004] initcall zf_init+0x0/0x142 returned -19 after 7812 usecs
[   38.900003] calling  watchdog_init+0x0/0xa0 @ 1
[   38.904004] epx_c3: cannot register miscdev on minor=130 (err=-16)
[   38.908006] initcall watchdog_init+0x0/0xa0 returned -16 after 3906 usecs
[   38.912004] initcall watchdog_init+0x0/0xa0 returned with error code -16 
[   38.916004] calling  wm831x_wdt_init+0x0/0xf @ 1
[   38.920010] bus: 'platform': add driver wm831x-watchdog
[   38.924078] initcall wm831x_wdt_init+0x0/0xf returned 0 after 3906 usecs
[   38.928005] calling  watchdog_init+0x0/0xa0 @ 1
[   38.932003] SoftDog: cannot register miscdev on minor=130 (err=-16)
[   38.936004] initcall watchdog_init+0x0/0xa0 returned -16 after 3906 usecs
[   38.940004] initcall watchdog_init+0x0/0xa0 returned with error code -16 
[   38.944003] calling  linear_init+0x0/0xf @ 1
[   38.948002] md: linear personality registered for level -1
[   38.952004] initcall linear_init+0x0/0xf returned 0 after 3906 usecs
[   38.956004] calling  raid0_init+0x0/0xf @ 1
[   38.960002] md: raid0 personality registered for level 0
[   38.964004] initcall raid0_init+0x0/0xf returned 0 after 3906 usecs
[   38.968004] calling  raid_init+0x0/0xf @ 1
[   38.972002] md: raid1 personality registered for level 1
[   38.976004] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   38.980003] calling  raid_init+0x0/0xf @ 1
[   38.984002] md: raid10 personality registered for level 10
[   38.988004] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   38.992003] calling  raid5_init+0x0/0x25 @ 1
[   38.996002] md: raid6 personality registered for level 6
[   39.000003] md: raid5 personality registered for level 5
[   39.004002] md: raid4 personality registered for level 4
[   39.008004] initcall raid5_init+0x0/0x25 returned 0 after 11718 usecs
[   39.012004] calling  multipath_init+0x0/0xf @ 1
[   39.016002] md: multipath personality registered for level -4
[   39.020004] initcall multipath_init+0x0/0xf returned 0 after 3906 usecs
[   39.024004] calling  raid_init+0x0/0xf @ 1
[   39.028002] md: faulty personality registered for level -5
[   39.032003] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   39.036004] calling  vhci_init+0x0/0x1e @ 1
[   39.040002] Bluetooth: Virtual HCI driver ver 1.3
[   39.044008] device: 'vhci': device_add
[   39.048177] PM: Adding info for No Bus:vhci
[   39.052056] initcall vhci_init+0x0/0x1e returned 0 after 11718 usecs
[   39.056003] calling  bcm203x_init+0x0/0x44 @ 1
[   39.060003] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[   39.064011] bus: 'usb': add driver bcm203x
[   39.068068] usbcore: registered new interface driver bcm203x
[   39.072005] initcall bcm203x_init+0x0/0x44 returned 0 after 11718 usecs
[   39.076003] calling  bpa10x_init+0x0/0x25 @ 1
[   39.080002] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[   39.084007] bus: 'usb': add driver bpa10x
[   39.088059] usbcore: registered new interface driver bpa10x
[   39.092004] initcall bpa10x_init+0x0/0x25 returned 0 after 11718 usecs
[   39.096004] calling  bfusb_init+0x0/0x44 @ 1
[   39.100002] Bluetooth: BlueFRITZ! USB driver ver 1.2
[   39.104006] bus: 'usb': add driver bfusb
[   39.108059] usbcore: registered new interface driver bfusb
[   39.112004] initcall bfusb_init+0x0/0x44 returned 0 after 11718 usecs
[   39.116003] calling  btusb_init+0x0/0x25 @ 1
[   39.120002] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   39.124006] bus: 'usb': add driver btusb
[   39.128059] usbcore: registered new interface driver btusb
[   39.132004] initcall btusb_init+0x0/0x25 returned 0 after 11718 usecs
[   39.136003] calling  kcapi_init+0x0/0x26 @ 1
[   39.140072] initcall kcapi_init+0x0/0x26 returned 0 after 0 usecs
[   39.144005] calling  capi_init+0x0/0x22f @ 1
[   39.148009] device class 'capi': registering
[   39.152066] device: 'capi': device_add
[   39.156110] PM: Adding info for No Bus:capi
[   39.160070] CAPI 2.0 started up with major 68 (middleware+capifs)
[   39.164005] initcall capi_init+0x0/0x22f returned 0 after 15625 usecs
[   39.168005] calling  capifs_init+0x0/0xf @ 1
[   39.172013] initcall capifs_init+0x0/0xf returned 0 after 0 usecs
[   39.176004] calling  gigaset_init_module+0x0/0x29 @ 1
[   39.180002] gigaset: Driver for Gigaset 307x (debug build)
[   39.184002] gigaset: Kernel CAPI interface
[   39.188004] initcall gigaset_init_module+0x0/0x29 returned 0 after 7812 usecs
[   39.192004] calling  usb_gigaset_init+0x0/0x81 @ 1
[   39.196033] bus: 'usb': add driver usb_gigaset
[   39.200065] usbcore: registered new interface driver usb_gigaset
[   39.204002] usb_gigaset: USB Driver for Gigaset 307x using M105
[   39.208004] initcall usb_gigaset_init+0x0/0x81 returned 0 after 11718 usecs
[   39.212003] calling  cpufreq_stats_init+0x0/0xa8 @ 1
[   39.216008] initcall cpufreq_stats_init+0x0/0xa8 returned 0 after 0 usecs
[   39.220003] calling  cpufreq_gov_powersave_init+0x0/0xf @ 1
[   39.224005] initcall cpufreq_gov_powersave_init+0x0/0xf returned 0 after 0 usecs
[   39.228004] calling  cpufreq_gov_userspace_init+0x0/0xf @ 1
[   39.232004] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 0 usecs
[   39.236003] calling  init_ladder+0x0/0xf @ 1
[   39.240004] cpuidle: using governor ladder
[   39.244004] initcall init_ladder+0x0/0xf returned 0 after 3906 usecs
[   39.248004] calling  init_menu+0x0/0xf @ 1
[   39.252002] cpuidle: using governor menu
[   39.256004] initcall init_menu+0x0/0xf returned 0 after 3906 usecs
[   39.260003] calling  memstick_init+0x0/0x6f @ 1
[   39.264087] bus: 'memstick': registered
[   39.268003] device class 'memstick_host': registering
[   39.272063] initcall memstick_init+0x0/0x6f returned 0 after 7812 usecs
[   39.280004] calling  mspro_block_init+0x0/0x63 @ 1
[   39.284004] bus: 'memstick': add driver mspro_block
[   39.288056] initcall mspro_block_init+0x0/0x63 returned 0 after 3906 usecs
[   39.296003] calling  tifm_ms_init+0x0/0xf @ 1
[   39.300003] bus: 'tifm': add driver tifm_ms
[   39.304056] initcall tifm_ms_init+0x0/0xf returned 0 after 3906 usecs
[   39.312003] calling  jmb38x_ms_init+0x0/0x16 @ 1
[   39.316015] bus: 'pci': add driver jmb38x_ms
[   39.320066] initcall jmb38x_ms_init+0x0/0x16 returned 0 after 3906 usecs
[   39.328004] calling  bd2802_init+0x0/0x11 @ 1
[   39.332007] bus: 'i2c': add driver BD2802
[   39.336072] i2c-core: driver [BD2802] registered
[   39.340005] initcall bd2802_init+0x0/0x11 returned 0 after 7812 usecs
[   39.348003] calling  pca9532_init+0x0/0x11 @ 1
[   39.352005] bus: 'i2c': add driver pca9532
[   39.356054] i2c-core: driver [pca9532] registered
[   39.360004] initcall pca9532_init+0x0/0x11 returned 0 after 7812 usecs
[   39.368003] calling  lp3944_module_init+0x0/0x11 @ 1
[   39.372004] bus: 'i2c': add driver lp3944
[   39.376054] i2c-core: driver [lp3944] registered
[   39.380004] initcall lp3944_module_init+0x0/0x11 returned 0 after 7812 usecs
[   39.388003] calling  regulator_led_init+0x0/0xf @ 1
[   39.392006] bus: 'platform': add driver leds-regulator
[   39.396062] initcall regulator_led_init+0x0/0xf returned 0 after 3906 usecs
[   39.404003] calling  timer_trig_init+0x0/0xf @ 1
[   39.408004] initcall timer_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.416003] calling  heartbeat_trig_init+0x0/0xf @ 1
[   39.420003] initcall heartbeat_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.428002] calling  bl_trig_init+0x0/0xf @ 1
[   39.432003] initcall bl_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.436003] calling  gpio_trig_init+0x0/0xf @ 1
[   39.440003] initcall gpio_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.448002] calling  defon_trig_init+0x0/0xf @ 1
[   39.452003] initcall defon_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.460002] calling  ib_core_init+0x0/0x3a @ 1
[   39.464002] device class 'infiniband': registering
[   39.468054] initcall ib_core_init+0x0/0x3a returned 0 after 3906 usecs
[   39.476003] calling  ib_mad_init_module+0x0/0xbf @ 1
[   39.480185] initcall ib_mad_init_module+0x0/0xbf returned 0 after 0 usecs
[   39.488003] calling  ib_sa_init+0x0/0x57 @ 1
[   39.492060] initcall ib_sa_init+0x0/0x57 returned 0 after 0 usecs
[   39.496003] calling  ib_cm_init+0x0/0x156 @ 1
[   39.500030] device class 'infiniband_cm': registering
[   39.504070] initcall ib_cm_init+0x0/0x156 returned 0 after 3906 usecs
[   39.508003] calling  iw_cm_init+0x0/0x2c @ 1
[   39.512049] initcall iw_cm_init+0x0/0x2c returned 0 after 0 usecs
[   39.520004] calling  addr_init+0x0/0x3b @ 1
[   39.524042] initcall addr_init+0x0/0x3b returned 0 after 0 usecs
[   39.528005] calling  cma_init+0x0/0x89 @ 1
[   39.532042] initcall cma_init+0x0/0x89 returned 0 after 0 usecs
[   39.536003] calling  ib_umad_init+0x0/0xa9 @ 1
[   39.540005] device class 'infiniband_mad': registering
[   39.544060] initcall ib_umad_init+0x0/0xa9 returned 0 after 3906 usecs
[   39.552003] calling  ib_uverbs_init+0x0/0xa9 @ 1
[   39.556004] device class 'infiniband_verbs': registering
[   39.564064] initcall ib_uverbs_init+0x0/0xa9 returned 0 after 7812 usecs
[   39.568003] calling  ib_ucm_init+0x0/0x8d @ 1
[   39.572014] initcall ib_ucm_init+0x0/0x8d returned 0 after 0 usecs
[   39.580003] calling  ucma_init+0x0/0x45 @ 1
[   39.584008] device: 'rdma_cm': device_add
[   39.588174] PM: Adding info for No Bus:rdma_cm
[   39.592056] initcall ucma_init+0x0/0x45 returned 0 after 7812 usecs
[   39.600003] calling  iwch_init_module+0x0/0x33 @ 1
[   39.605299] initcall iwch_init_module+0x0/0x33 returned 0 after 0 usecs
[   39.608004] calling  c4iw_init_module+0x0/0x42 @ 1
[   39.612052] initcall c4iw_init_module+0x0/0x42 returned 0 after 0 usecs
[   39.620003] calling  mlx4_ib_init+0x0/0xf @ 1
[   39.624003] initcall mlx4_ib_init+0x0/0xf returned 0 after 0 usecs
[   39.628003] calling  ipoib_init_module+0x0/0xf3 @ 1
[   39.636079] initcall ipoib_init_module+0x0/0xf3 returned 0 after 0 usecs
[   39.640003] calling  dcdbas_init+0x0/0x53 @ 1
[   39.644009] bus: 'platform': add driver dcdbas
[   39.652019] Registering platform device 'dcdbas'. Parent at platform
[   39.656003] device: 'dcdbas': device_add
[   39.660009] bus: 'platform': add device dcdbas
[   39.664015] PM: Adding info for platform:dcdbas
[   39.668074] bus: 'platform': driver_probe_device: matched device dcdbas with driver dcdbas
[   39.672003] bus: 'platform': really_probe: probing driver dcdbas with device dcdbas
[   39.672003] PPS event at 4294902214
[   39.676018] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   39.680002] driver: 'dcdbas': driver_bound: bound to device 'dcdbas'
[   39.684003] bus: 'platform': really_probe: bound device dcdbas to driver dcdbas
[   39.692006] initcall dcdbas_init+0x0/0x53 returned 0 after 46875 usecs
[   39.696003] calling  padlock_init+0x0/0xc4 @ 1
[   39.700002] padlock: VIA PadLock not detected.
[   39.704003] initcall padlock_init+0x0/0xc4 returned -19 after 3906 usecs
[   39.708003] calling  padlock_init+0x0/0x6e @ 1
[   39.712002] padlock: VIA PadLock Hash Engine not detected.
[   39.716003] initcall padlock_init+0x0/0x6e returned -19 after 3906 usecs
[   39.720003] calling  hifn_init+0x0/0x98 @ 1
[   39.724018] bus: 'pci': add driver hifn795x
[   39.728085] Driver for HIFN 795x crypto accelerator chip has been successfully registered.
[   39.732004] initcall hifn_init+0x0/0x98 returned 0 after 7812 usecs
[   39.736003] calling  init_hrt_clocksource+0x0/0x134 @ 1
[   39.740003] initcall init_hrt_clocksource+0x0/0x134 returned -19 after 0 usecs
[   39.744004] calling  cs5535_mfgpt_init+0x0/0x174 @ 1
[   39.748003] cs5535-clockevt: Could not allocate MFPGT timer
[   39.752003] initcall cs5535_mfgpt_init+0x0/0x174 returned -19 after 3906 usecs
[   39.756003] calling  hid_init+0x0/0x58 @ 1
[   39.760072] bus: 'hid': registered
[   39.763476] device class 'hidraw': registering
[   39.768042] initcall hid_init+0x0/0x58 returned 0 after 7812 usecs
[   39.772004] calling  mmm_init+0x0/0x16 @ 1
[   39.776002] bus: 'hid': add driver 3m-pct
[   39.780057] initcall mmm_init+0x0/0x16 returned 0 after 3906 usecs
[   39.784003] calling  a4_init+0x0/0x16 @ 1
[   39.788002] bus: 'hid': add driver a4tech
[   39.792056] initcall a4_init+0x0/0x16 returned 0 after 3906 usecs
[   39.796003] calling  apple_init+0x0/0x2d @ 1
[   39.800002] bus: 'hid': add driver apple
[   39.804056] initcall apple_init+0x0/0x2d returned 0 after 3906 usecs
[   39.808003] calling  ch_init+0x0/0x16 @ 1
[   39.812003] bus: 'hid': add driver chicony
[   39.816066] initcall ch_init+0x0/0x16 returned 0 after 3906 usecs
[   39.820003] calling  cp_init+0x0/0x16 @ 1
[   39.824002] bus: 'hid': add driver cypress
[   39.828056] initcall cp_init+0x0/0x16 returned 0 after 3906 usecs
[   39.832003] calling  dr_init+0x0/0x16 @ 1
[   39.836002] bus: 'hid': add driver dragonrise
[   39.840056] initcall dr_init+0x0/0x16 returned 0 after 3906 usecs
[   39.844003] calling  egalax_init+0x0/0x16 @ 1
[   39.848002] bus: 'hid': add driver egalax-touch
[   39.852057] initcall egalax_init+0x0/0x16 returned 0 after 3906 usecs
[   39.856003] calling  ez_init+0x0/0x16 @ 1
[   39.860002] bus: 'hid': add driver ezkey
[   39.864076] initcall ez_init+0x0/0x16 returned 0 after 3906 usecs
[   39.868003] calling  gyration_init+0x0/0x16 @ 1
[   39.872002] bus: 'hid': add driver gyration
[   39.876057] initcall gyration_init+0x0/0x16 returned 0 after 3906 usecs
[   39.880003] calling  kye_init+0x0/0x16 @ 1
[   39.884002] bus: 'hid': add driver kye
[   39.888056] initcall kye_init+0x0/0x16 returned 0 after 3906 usecs
[   39.892003] calling  lg_init+0x0/0x16 @ 1
[   39.896002] bus: 'hid': add driver logitech
[   39.900056] initcall lg_init+0x0/0x16 returned 0 after 3906 usecs
[   39.904003] calling  magicmouse_init+0x0/0x2d @ 1
[   39.908002] bus: 'hid': add driver magicmouse
[   39.912056] initcall magicmouse_init+0x0/0x2d returned 0 after 3906 usecs
[   39.916003] calling  mr_init+0x0/0x16 @ 1
[   39.920002] bus: 'hid': add driver monterey
[   39.924056] initcall mr_init+0x0/0x16 returned 0 after 3906 usecs
[   39.928003] calling  mosart_init+0x0/0x16 @ 1
[   39.932003] bus: 'hid': add driver mosart
[   39.936056] initcall mosart_init+0x0/0x16 returned 0 after 3906 usecs
[   39.940003] calling  ntrig_init+0x0/0x16 @ 1
[   39.944002] bus: 'hid': add driver ntrig
[   39.948056] initcall ntrig_init+0x0/0x16 returned 0 after 3906 usecs
[   39.952003] calling  ortek_init+0x0/0x16 @ 1
[   39.956002] bus: 'hid': add driver ortek
[   39.960066] initcall ortek_init+0x0/0x16 returned 0 after 3906 usecs
[   39.964003] calling  quanta_init+0x0/0x16 @ 1
[   39.968002] bus: 'hid': add driver quanta-touch
[   39.972069] initcall quanta_init+0x0/0x16 returned 0 after 3906 usecs
[   39.976003] calling  pl_init+0x0/0x16 @ 1
[   39.980002] bus: 'hid': add driver pantherlord
[   39.984056] initcall pl_init+0x0/0x16 returned 0 after 3906 usecs
[   39.988003] calling  pl_init+0x0/0x16 @ 1
[   39.992002] bus: 'hid': add driver petalynx
[   39.996056] initcall pl_init+0x0/0x16 returned 0 after 3906 usecs
[   40.000003] calling  picolcd_init+0x0/0x16 @ 1
[   40.004003] bus: 'hid': add driver hid-picolcd
[   40.008056] initcall picolcd_init+0x0/0x16 returned 0 after 3906 usecs
[   40.012004] calling  roccat_init+0x0/0x92 @ 1
[   40.016004] device class 'roccat': registering
[   40.020056] initcall roccat_init+0x0/0x92 returned 0 after 3906 usecs
[   40.024003] calling  kone_init+0x0/0x16 @ 1
[   40.028002] bus: 'hid': add driver kone
[   40.032057] initcall kone_init+0x0/0x16 returned 0 after 3906 usecs
[   40.036003] calling  samsung_init+0x0/0x16 @ 1
[   40.040002] bus: 'hid': add driver samsung
[   40.044056] initcall samsung_init+0x0/0x16 returned 0 after 3906 usecs
[   40.048003] calling  sjoy_init+0x0/0x16 @ 1
[   40.052003] bus: 'hid': add driver smartjoyplus
[   40.056057] initcall sjoy_init+0x0/0x16 returned 0 after 3906 usecs
[   40.060003] calling  sony_init+0x0/0x16 @ 1
[   40.064002] bus: 'hid': add driver sony
[   40.068074] initcall sony_init+0x0/0x16 returned 0 after 3906 usecs
[   40.072003] calling  stantum_init+0x0/0x16 @ 1
[   40.076002] bus: 'hid': add driver stantum
[   40.080058] initcall stantum_init+0x0/0x16 returned 0 after 3906 usecs
[   40.084003] calling  sp_init+0x0/0x16 @ 1
[   40.088002] bus: 'hid': add driver sunplus
[   40.092057] initcall sp_init+0x0/0x16 returned 0 after 3906 usecs
[   40.096003] calling  ga_init+0x0/0x16 @ 1
[   40.100002] bus: 'hid': add driver greenasia
[   40.104056] initcall ga_init+0x0/0x16 returned 0 after 3906 usecs
[   40.108003] calling  ts_init+0x0/0x16 @ 1
[   40.112002] bus: 'hid': add driver topseed
[   40.116056] initcall ts_init+0x0/0x16 returned 0 after 3906 usecs
[   40.120003] calling  twinhan_init+0x0/0x16 @ 1
[   40.124002] bus: 'hid': add driver twinhan
[   40.128056] initcall twinhan_init+0x0/0x16 returned 0 after 3906 usecs
[   40.132003] calling  zp_init+0x0/0x16 @ 1
[   40.136002] bus: 'hid': add driver zeroplus
[   40.140056] initcall zp_init+0x0/0x16 returned 0 after 3906 usecs
[   40.144003] calling  wacom_init+0x0/0x2d @ 1
[   40.148002] bus: 'hid': add driver wacom
[   40.152056] initcall wacom_init+0x0/0x2d returned 0 after 3906 usecs
[   40.156003] calling  hid_init+0x0/0x9a @ 1
[   40.160043] bus: 'hid': add driver generic-usb
[   40.164074] bus: 'usb': add driver usbhid
[   40.168067] usbcore: registered new interface driver usbhid
[   40.172001] usbhid: USB HID core driver
[   40.176004] initcall hid_init+0x0/0x9a returned 0 after 15625 usecs
[   40.184003] calling  dell_init+0x0/0x3c9 @ 1
[   40.188004] initcall dell_init+0x0/0x3c9 returned -19 after 0 usecs
[   40.192003] calling  oss_init+0x0/0x110 @ 1
[   40.196008] device: 'sequencer': device_add
[   40.200159] PM: Adding info for No Bus:sequencer
[   40.208057] device: 'sequencer2': device_add
[   40.212074] PM: Adding info for No Bus:sequencer2
[   40.216054] device: 'dspW': device_add
[   40.220084] PM: Adding info for No Bus:dspW
[   40.224055] device: 'audio': device_add
[   40.228077] PM: Adding info for No Bus:audio
[   40.232052] initcall oss_init+0x0/0x110 returned 0 after 35156 usecs
[   40.236003] calling  init_ad1848+0x0/0x1f9 @ 1
[   40.244002] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
[   40.248002] ad1848: No ISAPnP cards found, trying standard ones...
[   40.256003] initcall init_ad1848+0x0/0x1f9 returned 0 after 11718 usecs
[   40.264003] calling  init_pas2+0x0/0x430 @ 1
[   40.268002] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996
[   40.276001] I/O, IRQ, DMA and type are mandatory
[   40.280003] initcall init_pas2+0x0/0x430 returned -22 after 11718 usecs
[   40.284003] initcall init_pas2+0x0/0x430 returned with error code -22 
[   40.292003] calling  sb_init+0x0/0x1c5 @ 1
[   40.296002] sb: Init: Starting Probe...
[   40.300004] bus: 'pnp': add driver OSS SndBlstr
[   40.304055] sb: Init: Done
[   40.308012] bus: 'pnp': remove driver OSS SndBlstr
[   40.312049] driver: 'OSS SndBlstr': driver_release
[   40.316007] initcall sb_init+0x0/0x1c5 returned -19 after 19531 usecs
[   40.324003] calling  init_uart401+0x0/0x45 @ 1
[   40.328003] initcall init_uart401+0x0/0x45 returned 0 after 0 usecs
[   40.336003] calling  init_opl3+0x0/0x522 @ 1
[   40.340002] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
[   40.348003] initcall init_opl3+0x0/0x522 returned 0 after 7812 usecs
[   40.352003] calling  init_vmidi+0x0/0x2cb @ 1
[   40.356001] MIDI Loopback device driver
[   40.360007] device: 'midi': device_add
[   40.364075] PM: Adding info for No Bus:midi
[   40.368093] device: 'midi1': device_add
[   40.372078] PM: Adding info for No Bus:midi1
[   40.376071] initcall init_vmidi+0x0/0x2cb returned 0 after 19531 usecs
[   40.384004] calling  oprofile_init+0x0/0x4c @ 1
[   40.388003] Registering sysdev class 'oprofile'
[   40.392062] Registering sys device of class 'oprofile'
[   40.400005] Registering sys device 'oprofile0'
[   40.404045] oprofile: using NMI interrupt.
[   40.408013] initcall oprofile_init+0x0/0x4c returned 0 after 19531 usecs
[   40.412006] calling  flow_cache_init_global+0x0/0x159 @ 1
[   40.420204] initcall flow_cache_init_global+0x0/0x159 returned 0 after 0 usecs
[   40.428004] calling  pg_init+0x0/0x2d0 @ 1
[   40.432002] pktgen 2.73: Packet Generator for packet performance testing.
[   40.436044] initcall pg_init+0x0/0x2d0 returned 0 after 3906 usecs
[   40.440005] calling  llc_init+0x0/0x1b @ 1
[   40.444004] initcall llc_init+0x0/0x1b returned 0 after 0 usecs
[   40.448003] calling  snap_init+0x0/0x31 @ 1
[   40.452010] initcall snap_init+0x0/0x31 returned 0 after 0 usecs
[   40.456003] calling  rif_init+0x0/0x5b @ 1
[   40.460013] initcall rif_init+0x0/0x5b returned 0 after 0 usecs
[   40.464004] calling  nfnetlink_init+0x0/0x1e @ 1
[   40.468002] Netfilter messages via NETLINK v0.30.
[   40.472020] initcall nfnetlink_init+0x0/0x1e returned 0 after 3906 usecs
[   40.476004] calling  nfnetlink_log_init+0x0/0xb3 @ 1
[   40.480015] initcall nfnetlink_log_init+0x0/0xb3 returned 0 after 0 usecs
[   40.484003] calling  nf_conntrack_standalone_init+0x0/0xf @ 1
[   40.488004] nf_conntrack version 0.5.0 (15860 buckets, 63440 max)
[   40.496199] initcall nf_conntrack_standalone_init+0x0/0xf returned 0 after 7812 usecs
[   40.500005] calling  nf_conntrack_ftp_init+0x0/0x1d0 @ 1
[   40.504008] initcall nf_conntrack_ftp_init+0x0/0x1d0 returned 0 after 0 usecs
[   40.508003] calling  nf_conntrack_irc_init+0x0/0x17c @ 1
[   40.512008] initcall nf_conntrack_irc_init+0x0/0x17c returned 0 after 0 usecs
[   40.516003] calling  xt_init+0x0/0x11f @ 1
[   40.520008] initcall xt_init+0x0/0x11f returned 0 after 0 usecs
[   40.524004] calling  tcpudp_mt_init+0x0/0x14 @ 1
[   40.528005] initcall tcpudp_mt_init+0x0/0x14 returned 0 after 0 usecs
[   40.532004] calling  connsecmark_tg_init+0x0/0xf @ 1
[   40.536010] initcall connsecmark_tg_init+0x0/0xf returned 0 after 0 usecs
[   40.540003] calling  nflog_tg_init+0x0/0xf @ 1
[   40.544003] initcall nflog_tg_init+0x0/0xf returned 0 after 0 usecs
[   40.548003] calling  tcpmss_tg_init+0x0/0x14 @ 1
[   40.552004] initcall tcpmss_tg_init+0x0/0x14 returned 0 after 0 usecs
[   40.556003] calling  conntrack_mt_init+0x0/0x14 @ 1
[   40.560004] initcall conntrack_mt_init+0x0/0x14 returned 0 after 0 usecs
[   40.564003] calling  policy_mt_init+0x0/0x14 @ 1
[   40.568004] initcall policy_mt_init+0x0/0x14 returned 0 after 0 usecs
[   40.572004] calling  ip_vs_init+0x0/0xa5 @ 1
[   40.576069] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[   40.580176] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[   40.588021] IPVS: ipvs loaded.
[   40.591076] initcall ip_vs_init+0x0/0xa5 returned 0 after 11718 usecs
[   40.592003] calling  ip_vs_rr_init+0x0/0xf @ 1
[   40.596003] IPVS: [rr] scheduler registered.
[   40.600003] initcall ip_vs_rr_init+0x0/0xf returned 0 after 3906 usecs
[   40.604003] calling  ip_vs_wrr_init+0x0/0xf @ 1
[   40.608003] IPVS: [wrr] scheduler registered.
[   40.612004] initcall ip_vs_wrr_init+0x0/0xf returned 0 after 3906 usecs
[   40.616003] calling  ip_vs_lc_init+0x0/0xf @ 1
[   40.620003] IPVS: [lc] scheduler registered.
[   40.624003] initcall ip_vs_lc_init+0x0/0xf returned 0 after 3906 usecs
[   40.628003] calling  ip_vs_wlc_init+0x0/0xf @ 1
[   40.632003] IPVS: [wlc] scheduler registered.
[   40.636005] initcall ip_vs_wlc_init+0x0/0xf returned 0 after 3906 usecs
[   40.640004] calling  ip_vs_lblcr_init+0x0/0x37 @ 1
[   40.644003] IPVS: [lblcr] scheduler registered.
[   40.648003] initcall ip_vs_lblcr_init+0x0/0x37 returned 0 after 3906 usecs
[   40.652004] calling  ip_vs_dh_init+0x0/0xf @ 1
[   40.656003] IPVS: [dh] scheduler registered.
[   40.660003] initcall ip_vs_dh_init+0x0/0xf returned 0 after 3906 usecs
[   40.664003] calling  ip_vs_sh_init+0x0/0xf @ 1
[   40.668002] IPVS: [sh] scheduler registered.
[   40.672004] initcall ip_vs_sh_init+0x0/0xf returned 0 after 3906 usecs
[   40.672002] PPS event at 4294902464
[   40.676004] calling  ip_vs_sed_init+0x0/0xf @ 1
[   40.680003] IPVS: [sed] scheduler registered.
[   40.684004] initcall ip_vs_sed_init+0x0/0xf returned 0 after 3906 usecs
[   40.688004] calling  ipip_init+0x0/0x50 @ 1
[   40.692004] IPv4 over IPv4 tunneling driver
[   40.696041] device: 'tunl0': device_add
[   40.700085] PM: Adding info for No Bus:tunl0
[   40.704134] initcall ipip_init+0x0/0x50 returned 0 after 11718 usecs
[   40.708004] calling  ipgre_init+0x0/0x8b @ 1
[   40.716001] GRE over IPv4 tunneling driver
[   40.720022] device: 'gre0': device_add
[   40.723853] PM: Adding info for No Bus:gre0
[   40.728169] initcall ipgre_init+0x0/0x8b returned 0 after 11718 usecs
[   40.732004] calling  ah4_init+0x0/0x5a @ 1
[   40.736006] initcall ah4_init+0x0/0x5a returned 0 after 0 usecs
[   40.744003] calling  esp4_init+0x0/0x5a @ 1
[   40.748004] initcall esp4_init+0x0/0x5a returned 0 after 0 usecs
[   40.752003] calling  tunnel4_init+0x0/0x2c @ 1
[   40.756005] initcall tunnel4_init+0x0/0x2c returned 0 after 0 usecs
[   40.764003] calling  xfrm4_transport_init+0x0/0x14 @ 1
[   40.768004] initcall xfrm4_transport_init+0x0/0x14 returned 0 after 0 usecs
[   40.776003] calling  xfrm4_mode_tunnel_init+0x0/0x14 @ 1
[   40.780004] initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 0 usecs
[   40.788004] calling  ipv4_netfilter_init+0x0/0xf @ 1
[   40.792008] initcall ipv4_netfilter_init+0x0/0xf returned 0 after 0 usecs
[   40.800004] calling  nf_conntrack_l3proto_ipv4_init+0x0/0x11d @ 1
[   40.808039] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x11d returned 0 after 0 usecs
[   40.816004] calling  nf_defrag_init+0x0/0x14 @ 1
[   40.820004] initcall nf_defrag_init+0x0/0x14 returned 0 after 0 usecs
[   40.824003] calling  bictcp_register+0x0/0xf @ 1
[   40.828002] TCP bic registered
[   40.832004] initcall bictcp_register+0x0/0xf returned 0 after 3906 usecs
[   40.840003] calling  tcp_westwood_register+0x0/0xf @ 1
[   40.844002] TCP westwood registered
[   40.848004] initcall tcp_westwood_register+0x0/0xf returned 0 after 3906 usecs
[   40.856003] calling  hybla_register+0x0/0xf @ 1
[   40.860002] TCP hybla registered
[   40.864003] initcall hybla_register+0x0/0xf returned 0 after 3906 usecs
[   40.868002] calling  tcp_vegas_register+0x0/0x11 @ 1
[   40.876002] TCP vegas registered
[   40.879231] initcall tcp_vegas_register+0x0/0x11 returned 0 after 0 usecs
[   40.884003] calling  tcp_lp_register+0x0/0xf @ 1
[   40.888002] TCP lp registered
[   40.892004] initcall tcp_lp_register+0x0/0xf returned 0 after 3906 usecs
[   40.900003] calling  xfrm_user_init+0x0/0x40 @ 1
[   40.904002] Initializing XFRM netlink socket
[   40.908024] initcall xfrm_user_init+0x0/0x40 returned 0 after 3906 usecs
[   40.916003] calling  packet_init+0x0/0x39 @ 1
[   40.920003] NET: Registered protocol family 17
[   40.924009] initcall packet_init+0x0/0x39 returned 0 after 3906 usecs
[   40.928003] calling  ipsec_pfkey_init+0x0/0x6b @ 1
[   40.936009] NET: Registered protocol family 15
[   40.940003] initcall ipsec_pfkey_init+0x0/0x6b returned 0 after 3906 usecs
[   40.944002] calling  br_init+0x0/0xa1 @ 1
[   40.952042] initcall br_init+0x0/0xa1 returned 0 after 3906 usecs
[   40.956003] calling  dsa_init_module+0x0/0x11 @ 1
[   40.960003] initcall dsa_init_module+0x0/0x11 returned 0 after 0 usecs
[   40.968003] calling  edsa_init_module+0x0/0x11 @ 1
[   40.972003] initcall edsa_init_module+0x0/0x11 returned 0 after 0 usecs
[   40.980003] calling  trailer_init_module+0x0/0x11 @ 1
[   40.984003] initcall trailer_init_module+0x0/0x11 returned 0 after 0 usecs
[   40.992003] calling  mv88e6060_init+0x0/0x11 @ 1
[   40.996003] initcall mv88e6060_init+0x0/0x11 returned 0 after 0 usecs
[   41.000003] calling  mv88e6123_61_65_init+0x0/0x11 @ 1
[   41.008008] initcall mv88e6123_61_65_init+0x0/0x11 returned 0 after 0 usecs
[   41.012003] calling  mv88e6131_init+0x0/0x11 @ 1
[   41.020003] initcall mv88e6131_init+0x0/0x11 returned 0 after 0 usecs
[   41.024003] calling  dsa_init_module+0x0/0xf @ 1
[   41.028009] bus: 'platform': add driver dsa
[   41.032084] initcall dsa_init_module+0x0/0xf returned 0 after 3906 usecs
[   41.040003] calling  ipx_init+0x0/0xcd @ 1
[   41.044195] NET: Registered protocol family 4
[   41.056026] initcall ipx_init+0x0/0xcd returned 0 after 11718 usecs
[   41.060003] calling  x25_init+0x0/0x7d @ 1
[   41.064002] NET: Registered protocol family 9
[   41.068003] X.25 for Linux Version 0.2
[   41.072020] initcall x25_init+0x0/0x7d returned 0 after 7812 usecs
[   41.080003] calling  lapb_init+0x0/0x7 @ 1
[   41.084003] initcall lapb_init+0x0/0x7 returned 0 after 0 usecs
[   41.088003] calling  l2cap_init+0x0/0xfb @ 1
[   41.092058] Bluetooth: L2CAP ver 2.14
[   41.096004] Bluetooth: L2CAP socket layer initialized
[   41.100005] initcall l2cap_init+0x0/0xfb returned 0 after 7812 usecs
[   41.104003] calling  sco_init+0x0/0xd8 @ 1
[   41.108011] Bluetooth: SCO (Voice Link) ver 0.6
[   41.112002] Bluetooth: SCO socket layer initialized
[   41.116003] initcall sco_init+0x0/0xd8 returned 0 after 7812 usecs
[   41.120003] calling  rfcomm_init+0x0/0xca @ 1
[   41.124113] Bluetooth: RFCOMM TTY layer initialized
[   41.128008] Bluetooth: RFCOMM socket layer initialized
[   41.136002] Bluetooth: RFCOMM ver 1.11
[   41.140004] initcall rfcomm_init+0x0/0xca returned 0 after 15625 usecs
[   41.144003] calling  bnep_init+0x0/0x78 @ 1
[   41.148002] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   41.156002] Bluetooth: BNEP filters: multicast
[   41.160003] initcall bnep_init+0x0/0x78 returned 0 after 11718 usecs
[   41.164002] calling  hidp_init+0x0/0x4d @ 1
[   41.168002] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   41.176005] bus: 'hid': add driver generic-bluetooth
[   41.180074] initcall hidp_init+0x0/0x4d returned 0 after 11718 usecs
[   41.188003] calling  af_rxrpc_init+0x0/0x167 @ 1
[   41.192164] NET: Registered protocol family 33
[   41.196016] initcall af_rxrpc_init+0x0/0x167 returned 0 after 3906 usecs
[   41.204003] calling  atm_clip_init+0x0/0x9a @ 1
[   41.208192] initcall atm_clip_init+0x0/0x9a returned 0 after 0 usecs
[   41.212003] calling  lane_module_init+0x0/0x5a @ 1
[   41.220007] lec:lane_module_init: lec.c: Jun 11 2010 12:25:33 initialized
[   41.224003] initcall lane_module_init+0x0/0x5a returned 0 after 3906 usecs
[   41.232003] calling  atm_mpoa_init+0x0/0x3a @ 1
[   41.236007] mpoa:atm_mpoa_init: mpc.c: Jun 11 2010 12:25:29 initialized
[   41.244003] initcall atm_mpoa_init+0x0/0x3a returned 0 after 7812 usecs
[   41.252003] calling  l2tp_init+0x0/0x2c @ 1
[   41.256014] L2TP core driver, V2.0
[   41.259414] initcall l2tp_init+0x0/0x2c returned 0 after 0 usecs
[   41.264003] calling  l2tp_ip_init+0x0/0x56 @ 1
[   41.268001] L2TP IP encapsulation support (L2TPv3)
[   41.272164] initcall l2tp_ip_init+0x0/0x56 returned 0 after 3906 usecs
[   41.280005] calling  l2tp_nl_init+0x0/0x23 @ 1
[   41.284001] L2TP netlink interface
[   41.288048] initcall l2tp_nl_init+0x0/0x23 returned 0 after 3906 usecs
[   41.292003] calling  econet_proto_init+0x0/0x1a4 @ 1
[   41.300002] NET: Registered protocol family 19
[   41.304036] initcall econet_proto_init+0x0/0x1a4 returned 0 after 3906 usecs
[   41.312005] calling  phonet_init+0x0/0x70 @ 1
[   41.316021] NET: Registered protocol family 35
[   41.320157] initcall phonet_init+0x0/0x70 returned 0 after 3906 usecs
[   41.324003] calling  pep_register+0x0/0x14 @ 1
[   41.332155] initcall pep_register+0x0/0x14 returned 0 after 0 usecs
[   41.336003] calling  vlan_proto_init+0x0/0x9d @ 1
[   41.340002] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[   41.348002] All bugs added by David S. Miller <davem@redhat.com>
[   41.356018] initcall vlan_proto_init+0x0/0x9d returned 0 after 15625 usecs
[   41.360003] calling  dccp_init+0x0/0x304 @ 1
[   41.370716] CCID: Activated CCID 2 (TCP-like)
[   41.372312] CCID: Activated CCID 3 (TCP-Friendly Rate Control)
[   41.380007] initcall dccp_init+0x0/0x304 returned 0 after 15625 usecs
[   41.384003] calling  dccp_v4_init+0x0/0x72 @ 1
[   41.392485] initcall dccp_v4_init+0x0/0x72 returned 0 after 0 usecs
[   41.396008] calling  sctp_init+0x0/0x706 @ 1
[   41.404902] SCTP: Hash tables configured (established 43690 bind 52428)
[   41.408290] initcall sctp_init+0x0/0x706 returned 0 after 7812 usecs
[   41.416011] calling  rds_init+0x0/0xa6 @ 1
[   41.420186] rds_page_remainder_cpu_notify(): cpu 0 action 0x7
[   41.428004] rds_page_remainder_cpu_notify(): cpu 1 action 0x7
[   41.432004] initcall rds_init+0x0/0xa6 returned -12 after 11718 usecs
[   41.440003] initcall rds_init+0x0/0xa6 returned with error code -12 
[   41.444003] calling  rds_rdma_init+0x0/0xf7 @ 1
[   41.448031] rds_rdma_listen_init(): cm 7dc2a9e0 listening on port 18634
[   41.456031] rds_rdma_listen_stop(): cm 7dc2a9e0
[   41.460011] initcall rds_rdma_init+0x0/0xf7 returned -12 after 11718 usecs
[   41.468003] initcall rds_rdma_init+0x0/0xf7 returned with error code -12 
[   41.476003] calling  lib80211_init+0x0/0x19 @ 1
[   41.480002] lib80211: common routines for IEEE802.11 drivers
[   41.484003] lib80211_crypt: registered algorithm 'NULL'
[   41.488003] initcall lib80211_init+0x0/0x19 returned 0 after 7812 usecs
[   41.496003] calling  caif_device_init+0x0/0x6b @ 1
[   41.500027] initcall caif_device_init+0x0/0x6b returned 0 after 0 usecs
[   41.508012] calling  chnl_init_module+0x0/0xf @ 1
[   41.512004] initcall chnl_init_module+0x0/0xf returned 0 after 0 usecs
[   41.520005] calling  caif_sktinit_module+0x0/0x132 @ 1
[   41.524082] NET: Registered protocol family 37
[   41.528004] initcall caif_sktinit_module+0x0/0x132 returned 0 after 3906 usecs
[   41.536003] calling  dcbnl_init+0x0/0x2d @ 1
[   41.540004] initcall dcbnl_init+0x0/0x2d returned 0 after 0 usecs
[   41.548003] calling  af_ieee802154_init+0x0/0x63 @ 1
[   41.552305] NET: Registered protocol family 36
[   41.556009] initcall af_ieee802154_init+0x0/0x63 returned 0 after 3906 usecs
[   41.564003] calling  wimax_subsys_init+0x0/0x2be @ 1
[   41.568089] initcall wimax_subsys_init+0x0/0x2be returned 0 after 0 usecs
[   41.576005] calling  mcheck_debugfs_init+0x0/0x35 @ 1
[   41.580022] initcall mcheck_debugfs_init+0x0/0x35 returned 0 after 0 usecs
[   41.588004] calling  severities_debugfs_init+0x0/0x35 @ 1
[   41.592017] initcall severities_debugfs_init+0x0/0x35 returned 0 after 0 usecs
[   41.600004] calling  powernow_init+0x0/0xcf @ 1
[   41.604004] initcall powernow_init+0x0/0xcf returned -19 after 0 usecs
[   41.612003] calling  centrino_init+0x0/0x26 @ 1
[   41.616004] initcall centrino_init+0x0/0x26 returned -19 after 0 usecs
[   41.620003] calling  cpufreq_p4_init+0x0/0x4f @ 1
[   41.628005] initcall cpufreq_p4_init+0x0/0x4f returned -19 after 0 usecs
[   41.632003] calling  update_mp_table+0x0/0x542 @ 1
[   41.640004] initcall update_mp_table+0x0/0x542 returned 0 after 0 usecs
[   41.644004] calling  lapic_insert_resource+0x0/0x35 @ 1
[   41.648006] initcall lapic_insert_resource+0x0/0x35 returned 0 after 0 usecs
[   41.656004] calling  print_ipi_mode+0x0/0x26 @ 1
[   41.660002] Using IPI No-Shortcut mode
[   41.664003] initcall print_ipi_mode+0x0/0x26 returned 0 after 3906 usecs
[   41.672003] PPS event at 4294902714
[   41.676007] calling  init_lapic_nmi_sysfs+0x0/0x33 @ 1
[   41.680003] initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 0 usecs
[   41.688003] calling  io_apic_bug_finalize+0x0/0x1a @ 1
[   41.692003] initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 0 usecs
[   41.700004] calling  check_early_ioremap_leak+0x0/0x45 @ 1
[   41.704004] initcall check_early_ioremap_leak+0x0/0x45 returned 0 after 0 usecs
[   41.712003] calling  pat_memtype_list_init+0x0/0x2e @ 1
[   41.716015] initcall pat_memtype_list_init+0x0/0x2e returned 0 after 0 usecs
[   41.720003] calling  sched_init_debug+0x0/0x1f @ 1
[   41.724020] initcall sched_init_debug+0x0/0x1f returned 0 after 0 usecs
[   41.728005] calling  init_oops_id+0x0/0x3a @ 1
[   41.732008] initcall init_oops_id+0x0/0x3a returned 0 after 0 usecs
[   41.736004] calling  disable_boot_consoles+0x0/0x3a @ 1
[   41.740003] initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 usecs
[   41.744003] calling  pm_qos_power_init+0x0/0xae @ 1
[   41.748011] device: 'cpu_dma_latency': device_add
[   41.752214] PM: Adding info for No Bus:cpu_dma_latency
[   41.756065] device: 'network_latency': device_add
[   41.760080] PM: Adding info for No Bus:network_latency
[   41.764056] device: 'network_throughput': device_add
[   41.768076] PM: Adding info for No Bus:network_throughput
[   41.772055] initcall pm_qos_power_init+0x0/0xae returned 0 after 23437 usecs
[   41.776004] calling  software_resume+0x0/0x1da @ 1
[   41.780004] PM: Resume from disk failed.
[   41.784004] initcall software_resume+0x0/0x1da returned -2 after 3906 usecs
[   41.788003] initcall software_resume+0x0/0x1da returned with error code -2 
[   41.792004] calling  taskstats_init+0x0/0x7d @ 1
[   41.796046] registered taskstats version 1
[   41.800004] initcall taskstats_init+0x0/0x7d returned 0 after 3906 usecs
[   41.804003] calling  clear_boot_tracer+0x0/0x27 @ 1
[   41.808007] initcall clear_boot_tracer+0x0/0x27 returned 0 after 0 usecs
[   41.812004] calling  event_trace_self_tests_init+0x0/0x20d @ 1
[   41.816004] Running tests on trace events:
[   41.820003] Testing event kfree_skb: OK
[   41.840561] Testing event skb_copy_datagram_iovec: OK
[   41.860549] Testing event scsi_dispatch_cmd_start: OK
[   41.880561] Testing event scsi_dispatch_cmd_error: OK
[   41.900557] Testing event scsi_dispatch_cmd_done: OK
[   41.920543] Testing event scsi_dispatch_cmd_timeout: OK
[   41.940546] Testing event scsi_eh_wakeup: OK
[   41.960548] Testing event lock_kernel: OK
[   41.980563] Testing event unlock_kernel: OK
[   42.000559] Testing event block_rq_abort: OK
[   42.020543] Testing event block_rq_requeue: OK
[   42.040561] Testing event block_rq_complete: OK
[   42.060554] Testing event block_rq_insert: OK
[   42.080557] Testing event block_rq_issue: OK
[   42.100560] Testing event block_bio_bounce: OK
[   42.120558] Testing event block_bio_complete: OK
[   42.140553] Testing event block_bio_backmerge: OK
[   42.160548] Testing event block_bio_frontmerge: OK
[   42.180564] Testing event block_bio_queue: OK
[   42.200556] Testing event block_getrq: OK
[   42.220544] Testing event block_sleeprq: OK
[   42.240556] Testing event block_plug: OK
[   42.260555] Testing event block_unplug_timer: OK
[   42.280539] Testing event block_unplug_io: OK
[   42.300541] Testing event block_split: OK
[   42.320557] Testing event block_remap: OK
[   42.340560] Testing event block_rq_remap: OK
[   42.360563] Testing event gfs2_glock_state_change: OK
[   42.380556] Testing event gfs2_glock_put: OK
[   42.400556] Testing event gfs2_demote_rq: OK
[   42.420560] Testing event gfs2_promote: OK
[   42.440545] Testing event gfs2_glock_queue: OK
[   42.460545] Testing event gfs2_pin: OK
[   42.480547] Testing event gfs2_log_flush: OK
[   42.500540] Testing event gfs2_log_blocks: OK
[   42.520563] Testing event gfs2_bmap: OK
[   42.540558] Testing event gfs2_block_alloc: OK
[   42.560562] Testing event xfs_attr_list_sf: OK
[   42.580557] Testing event xfs_attr_list_sf_all: OK
[   42.600541] Testing event xfs_attr_list_leaf: OK
[   42.620565] Testing event xfs_attr_list_leaf_end: OK
[   42.640559] Testing event xfs_attr_list_full: OK
[   42.660546] Testing event xfs_attr_list_add: 
[   42.676002] PPS event at 4294902965
[   42.680195] OK
[   42.681858] Testing event xfs_attr_list_wrong_blk: OK
[   42.700558] Testing event xfs_attr_list_notfound: OK
[   42.720555] Testing event xfs_perag_get: OK
[   42.740561] Testing event xfs_perag_put: OK
[   42.760561] Testing event xfs_attr_list_node_descend: OK
[   42.780555] Testing event xfs_iext_insert: OK
[   42.800549] Testing event xfs_iext_remove: OK
[   42.820556] Testing event xfs_bmap_pre_update: OK
[   42.840558] Testing event xfs_bmap_post_update: OK
[   42.860543] Testing event xfs_extlist: OK
[   42.880559] Testing event xfs_buf_init: OK
[   42.900556] Testing event xfs_buf_free: OK
[   42.920549] Testing event xfs_buf_hold: OK
[   42.940557] Testing event xfs_buf_rele: OK
[   42.960558] Testing event xfs_buf_pin: OK
[   42.980545] Testing event xfs_buf_unpin: OK
[   43.000561] Testing event xfs_buf_iodone: OK
[   43.020556] Testing event xfs_buf_iorequest: OK
[   43.040543] Testing event xfs_buf_bawrite: OK
[   43.060560] Testing event xfs_buf_bdwrite: OK
[   43.080561] Testing event xfs_buf_lock: OK
[   43.100548] Testing event xfs_buf_lock_done: OK
[   43.120561] Testing event xfs_buf_cond_lock: OK
[   43.140559] Testing event xfs_buf_unlock: OK
[   43.160545] Testing event xfs_buf_ordered_retry: OK
[   43.180561] Testing event xfs_buf_iowait: OK
[   43.200563] Testing event xfs_buf_iowait_done: OK
[   43.220564] Testing event xfs_buf_delwri_queue: OK
[   43.240559] Testing event xfs_buf_delwri_dequeue: OK
[   43.260559] Testing event xfs_buf_delwri_split: OK
[   43.280553] Testing event xfs_buf_get_noaddr: OK
[   43.300563] Testing event xfs_bdstrat_shut: OK
[   43.320556] Testing event xfs_buf_item_relse: OK
[   43.340543] Testing event xfs_buf_item_iodone: OK
[   43.360558] Testing event xfs_buf_item_iodone_async: OK
[   43.380559] Testing event xfs_buf_error_relse: OK
[   43.400546] Testing event xfs_trans_read_buf_io: OK
[   43.420560] Testing event xfs_trans_read_buf_shut: OK
[   43.440558] Testing event xfs_btree_corrupt: OK
[   43.460543] Testing event xfs_da_btree_corrupt: OK
[   43.480560] Testing event xfs_reset_dqcounts: OK
[   43.500561] Testing event xfs_inode_item_push: OK
[   43.520548] Testing event xfs_buf_find: OK
[   43.540541] Testing event xfs_buf_get: OK
[   43.560543] Testing event xfs_buf_read: OK
[   43.580557] Testing event xfs_buf_ioerror: OK
[   43.600555] Testing event xfs_buf_item_size: OK
[   43.620547] Testing event xfs_buf_item_size_stale: OK
[   43.640557] Testing event xfs_buf_item_format: OK
[   43.660557] Testing event xfs_buf_item_format_stale: 
[   43.676001] PPS event at 4294903215
[   43.680193] OK
[   43.681856] Testing event xfs_buf_item_pin: OK
[   43.700553] Testing event xfs_buf_item_unpin: OK
[   43.720548] Testing event xfs_buf_item_unpin_stale: OK
[   43.740540] Testing event xfs_buf_item_trylock: OK
[   43.760565] Testing event xfs_buf_item_unlock: OK
[   43.780559] Testing event xfs_buf_item_unlock_stale: OK
[   43.800544] Testing event xfs_buf_item_committed: OK
[   43.820547] Testing event xfs_buf_item_push: OK
[   43.840562] Testing event xfs_buf_item_pushbuf: OK
[   43.860559] Testing event xfs_trans_get_buf: OK
[   43.880543] Testing event xfs_trans_get_buf_recur: OK
[   43.900545] Testing event xfs_trans_getsb: OK
[   43.920545] Testing event xfs_trans_getsb_recur: OK
[   43.940563] Testing event xfs_trans_read_buf: OK
[   43.960557] Testing event xfs_trans_read_buf_recur: OK
[   43.980543] Testing event xfs_trans_log_buf: OK
[   44.000558] Testing event xfs_trans_brelse: OK
[   44.020554] Testing event xfs_trans_bjoin: OK
[   44.040548] Testing event xfs_trans_bhold: OK
[   44.060557] Testing event xfs_trans_bhold_release: OK
[   44.080556] Testing event xfs_trans_binval: OK
[   44.100543] Testing event xfs_ilock: OK
[   44.120547] Testing event xfs_ilock_nowait: OK
[   44.140560] Testing event xfs_ilock_demote: OK
[   44.160558] Testing event xfs_iunlock: OK
[   44.180543] Testing event xfs_iget_skip: OK
[   44.200558] Testing event xfs_iget_reclaim: OK
[   44.220560] Testing event xfs_iget_found: OK
[   44.240538] Testing event xfs_iget_alloc: OK
[   44.260562] Testing event xfs_ihold: OK
[   44.280557] Testing event xfs_irele: OK
[   44.300543] Testing event xfs_inode_pin: OK
[   44.320557] Testing event xfs_inode_unpin: OK
[   44.340555] Testing event xfs_inode_unpin_nowait: OK
[   44.360540] Testing event xfs_inode: OK
[   44.380541] Testing event xfs_dqadjust: OK
[   44.400556] Testing event xfs_dqreclaim_want: OK
[   44.420560] Testing event xfs_dqreclaim_dirty: OK
[   44.440546] Testing event xfs_dqreclaim_unlink: OK
[   44.460560] Testing event xfs_dqattach_found: OK
[   44.480558] Testing event xfs_dqattach_get: OK
[   44.500543] Testing event xfs_dqinit: OK
[   44.520544] Testing event xfs_dqreuse: OK
[   44.540545] Testing event xfs_dqalloc: OK
[   44.560562] Testing event xfs_dqtobp_read: OK
[   44.580555] Testing event xfs_dqread: OK
[   44.600541] Testing event xfs_dqread_fail: OK
[   44.620557] Testing event xfs_dqlookup_found: OK
[   44.640555] Testing event xfs_dqlookup_want: OK
[   44.660548] Testing event xfs_dqlookup_freelist: 
[   44.676001] PPS event at 4294903465
[   44.680180] OK
[   44.681848] Testing event xfs_dqlookup_done: OK
[   44.700541] Testing event xfs_dqget_hit: OK
[   44.720543] Testing event xfs_dqget_miss: OK
[   44.740560] Testing event xfs_dqput: OK
[   44.760554] Testing event xfs_dqput_wait: OK
[   44.780539] Testing event xfs_dqput_free: OK
[   44.800541] Testing event xfs_dqrele: OK
[   44.820564] Testing event xfs_dqflush: OK
[   44.840555] Testing event xfs_dqflush_force: OK
[   44.860547] Testing event xfs_dqflush_done: OK
[   44.880564] Testing event xfs_dquot_dqalloc: OK
[   44.900556] Testing event xfs_dquot_dqdetach: OK
[   44.920544] Testing event xfs_log_done_nonperm: OK
[   44.940545] Testing event xfs_log_done_perm: OK
[   44.960547] Testing event xfs_log_reserve: OK
[   44.980540] Testing event xfs_log_umount_write: OK
[   45.000541] Testing event xfs_log_grant_enter: OK
[   45.020544] Testing event xfs_log_grant_exit: OK
[   45.040546] Testing event xfs_log_grant_error: OK
[   45.060546] Testing event xfs_log_grant_sleep1: OK
[   45.080540] Testing event xfs_log_grant_wake1: OK
[   45.100541] Testing event xfs_log_grant_sleep2: OK
[   45.120564] Testing event xfs_log_grant_wake2: OK
[   45.140561] Testing event xfs_log_regrant_write_enter: OK
[   45.160546] Testing event xfs_log_regrant_write_exit: OK
[   45.180549] Testing event xfs_log_regrant_write_error: OK
[   45.200563] Testing event xfs_log_regrant_write_sleep1: OK
[   45.220557] Testing event xfs_log_regrant_write_wake1: OK
[   45.240544] Testing event xfs_log_regrant_write_sleep2: OK
[   45.260546] Testing event xfs_log_regrant_write_wake2: OK
[   45.280547] Testing event xfs_log_regrant_reserve_enter: OK
[   45.300561] Testing event xfs_log_regrant_reserve_exit: OK
[   45.320558] Testing event xfs_log_regrant_reserve_sub: OK
[   45.340543] Testing event xfs_log_ungrant_enter: OK
[   45.360545] Testing event xfs_log_ungrant_exit: OK
[   45.380546] Testing event xfs_log_ungrant_sub: OK
[   45.400563] Testing event xfs_file_read: OK
[   45.420556] Testing event xfs_file_buffered_write: OK
[   45.440543] Testing event xfs_file_direct_write: OK
[   45.460566] Testing event xfs_file_splice_read: OK
[   45.480556] Testing event xfs_file_splice_write: OK
[   45.500548] Testing event xfs_writepage: OK
[   45.520564] Testing event xfs_releasepage: OK
[   45.540556] Testing event xfs_invalidatepage: OK
[   45.560560] Testing event xfs_iomap_enter: OK
[   45.580554] Testing event xfs_iomap_found: OK
[   45.600548] Testing event xfs_iomap_alloc: OK
[   45.620540] Testing event xfs_delalloc_enospc: OK
[   45.640540] Testing event xfs_unwritten_convert: OK
[   45.660557] Testing event xfs_itruncate_start: 
[   45.676002] PPS event at 4294903715
[   45.680189] OK
[   45.681859] Testing event xfs_itruncate_finish_start: OK
[   45.700549] Testing event xfs_itruncate_finish_end: OK
[   45.720550] Testing event xfs_pagecache_inval: OK
[   45.740542] Testing event xfs_bunmap: OK
[   45.760558] Testing event xfs_alloc_busy: OK
[   45.780554] Testing event xfs_alloc_unbusy: OK
[   45.800548] Testing event xfs_alloc_busysearch: OK
[   45.820564] Testing event xfs_trans_commit_lsn: OK
[   45.840557] Testing event xfs_agf: OK
[   45.860543] Testing event xfs_free_extent: OK
[   45.880545] Testing event xfs_alloc_exact_done: OK
[   45.900560] Testing event xfs_alloc_exact_error: OK
[   45.920558] Testing event xfs_alloc_near_nominleft: OK
[   45.940541] Testing event xfs_alloc_near_first: OK
[   45.960558] Testing event xfs_alloc_near_greater: OK
[   45.980561] Testing event xfs_alloc_near_lesser: OK
[   46.000547] Testing event xfs_alloc_near_error: OK
[   46.020560] Testing event xfs_alloc_size_neither: OK
[   46.040558] Testing event xfs_alloc_size_noentry: OK
[   46.060542] Testing event xfs_alloc_size_nominleft: OK
[   46.080559] Testing event xfs_alloc_size_done: OK
[   46.100561] Testing event xfs_alloc_size_error: OK
[   46.120548] Testing event xfs_alloc_small_freelist: OK
[   46.140542] Testing event xfs_alloc_small_notenough: OK
[   46.160542] Testing event xfs_alloc_small_done: OK
[   46.180545] Testing event xfs_alloc_small_error: OK
[   46.200545] Testing event xfs_alloc_vextent_badargs: OK
[   46.220540] Testing event xfs_alloc_vextent_nofix: OK
[   46.240541] Testing event xfs_alloc_vextent_noagbp: OK
[   46.260543] Testing event xfs_alloc_vextent_loopfailed: OK
[   46.280544] Testing event xfs_alloc_vextent_allfailed: OK
[   46.300547] Testing event xfs_dir2_sf_addname: OK
[   46.320547] Testing event xfs_dir2_sf_create: OK
[   46.340540] Testing event xfs_dir2_sf_lookup: OK
[   46.360565] Testing event xfs_dir2_sf_replace: OK
[   46.380560] Testing event xfs_dir2_sf_removename: OK
[   46.400545] Testing event xfs_dir2_sf_toino4: OK
[   46.420546] Testing event xfs_dir2_sf_toino8: OK
[   46.440561] Testing event xfs_dir2_sf_to_block: OK
[   46.460556] Testing event xfs_dir2_block_addname: OK
[   46.480543] Testing event xfs_dir2_block_lookup: OK
[   46.500546] Testing event xfs_dir2_block_replace: OK
[   46.520546] Testing event xfs_dir2_block_removename: OK
[   46.540539] Testing event xfs_dir2_block_to_sf: OK
[   46.560541] Testing event xfs_dir2_block_to_leaf: OK
[   46.580543] Testing event xfs_dir2_leaf_addname: OK
[   46.600545] Testing event xfs_dir2_leaf_lookup: OK
[   46.620546] Testing event xfs_dir2_leaf_replace: OK
[   46.640547] Testing event xfs_dir2_leaf_removename: OK
[   46.660540] Testing event xfs_dir2_leaf_to_block: 
[   46.676001] PPS event at 4294903965
[   46.680193] OK
[   46.681863] Testing event xfs_dir2_leaf_to_node: OK
[   46.700561] Testing event xfs_dir2_node_addname: OK
[   46.720546] Testing event xfs_dir2_node_lookup: OK
[   46.740548] Testing event xfs_dir2_node_replace: OK
[   46.760563] Testing event xfs_dir2_node_removename: OK
[   46.780556] Testing event xfs_dir2_node_to_leaf: OK
[   46.800544] Testing event xfs_dir2_leafn_add: OK
[   46.820557] Testing event xfs_dir2_leafn_remove: OK
[   46.840555] Testing event xfs_dir2_grow_inode: OK
[   46.860549] Testing event xfs_dir2_shrink_inode: OK
[   46.880557] Testing event xfs_dir2_leafn_moveents: OK
[   46.900558] Testing event xfs_swap_extent_before: OK
[   46.920545] Testing event xfs_swap_extent_after: OK
[   46.940546] Testing event xfs_log_recover_item_add: OK
[   46.960540] Testing event xfs_log_recover_item_add_cont: OK
[   46.980542] Testing event xfs_log_recover_item_reorder_head: OK
[   47.000556] Testing event xfs_log_recover_item_reorder_tail: OK
[   47.020553] Testing event xfs_log_recover_item_recover: OK
[   47.040548] Testing event xfs_log_recover_buf_not_cancel: OK
[   47.060548] Testing event xfs_log_recover_buf_cancel: OK
[   47.080540] Testing event xfs_log_recover_buf_cancel_add: OK
[   47.100542] Testing event xfs_log_recover_buf_cancel_ref_inc: OK
[   47.120559] Testing event xfs_log_recover_buf_recover: OK
[   47.140552] Testing event xfs_log_recover_buf_inode_buf: OK
[   47.160548] Testing event xfs_log_recover_buf_reg_buf: OK
[   47.180542] Testing event xfs_log_recover_buf_dquot_buf: OK
[   47.200565] Testing event xfs_log_recover_inode_recover: OK
[   47.220554] Testing event xfs_log_recover_inode_cancel: OK
[   47.240547] Testing event xfs_log_recover_inode_skip: OK
[   47.260548] Testing event jbd2_checkpoint: OK
[   47.280562] Testing event jbd2_start_commit: OK
[   47.300556] Testing event jbd2_commit_locking: OK
[   47.320543] Testing event jbd2_commit_flushing: OK
[   47.340546] Testing event jbd2_commit_logging: OK
[   47.360548] Testing event jbd2_end_commit: OK
[   47.380540] Testing event jbd2_submit_inode_data: OK
[   47.400541] Testing event jbd2_run_stats: OK
[   47.420544] Testing event jbd2_checkpoint_stats: OK
[   47.440545] Testing event jbd2_cleanup_journal_tail: OK
[   47.460548] Testing event ext4_free_inode: OK
[   47.480540] Testing event ext4_request_inode: OK
[   47.500563] Testing event ext4_allocate_inode: OK
[   47.520559] Testing event ext4_write_begin: OK
[   47.540546] Testing event ext4_da_write_begin: OK
[   47.560548] Testing event ext4_ordered_write_end: OK
[   47.580547] Testing event ext4_writeback_write_end: OK
[   47.600540] Testing event ext4_journalled_write_end: OK
[   47.620542] Testing event ext4_da_write_end: OK
[   47.640559] Testing event ext4_writepage: OK
[   47.660561] Testing event ext4_da_writepages: 
[   47.676001] PPS event at 4294904215
[   47.680178] OK
[   47.681846] Testing event ext4_da_write_pages: OK
[   47.700541] Testing event ext4_da_writepages_result: OK
[   47.720543] Testing event ext4_discard_blocks: OK
[   47.740545] Testing event ext4_mb_new_inode_pa: OK
[   47.760560] Testing event ext4_mb_new_group_pa: OK
[   47.780555] Testing event ext4_mb_release_inode_pa: OK
[   47.800541] Testing event ext4_mb_release_group_pa: OK
[   47.820556] Testing event ext4_discard_preallocations: OK
[   47.840559] Testing event ext4_mb_discard_preallocations: OK
[   47.860544] Testing event ext4_request_blocks: OK
[   47.880547] Testing event ext4_allocate_blocks: OK
[   47.900541] Testing event ext4_free_blocks: OK
[   47.920543] Testing event ext4_sync_file: OK
[   47.940543] Testing event ext4_sync_fs: OK
[   47.960560] Testing event ext4_alloc_da_blocks: OK
[   47.980554] Testing event ext4_mballoc_alloc: OK
[   48.000541] Testing event ext4_mballoc_prealloc: OK
[   48.020541] Testing event ext4_mballoc_discard: OK
[   48.040541] Testing event ext4_mballoc_free: OK
[   48.060544] Testing event ext4_forget: OK
[   48.080546] Testing event ext4_da_update_reserve_space: OK
[   48.100563] Testing event ext4_da_reserve_space: OK
[   48.120557] Testing event ext4_da_release_space: OK
[   48.140542] Testing event ext4_mb_bitmap_load: OK
[   48.160557] Testing event ext4_mb_buddy_bitmap_load: OK
[   48.180572] Testing event kmalloc: OK
[   48.200540] Testing event kmem_cache_alloc: OK
[   48.220541] Testing event kmalloc_node: OK
[   48.240555] Testing event kmem_cache_alloc_node: OK
[   48.260560] Testing event kfree: OK
[   48.280545] Testing event kmem_cache_free: OK
[   48.300559] Testing event mm_page_free_direct: OK
[   48.320556] Testing event mm_pagevec_free: OK
[   48.340543] Testing event mm_page_alloc: OK
[   48.360544] Testing event mm_page_alloc_zone_locked: OK
[   48.380559] Testing event mm_page_pcpu_drain: OK
[   48.400554] Testing event mm_page_alloc_extfrag: OK
[   48.420541] Testing event power_start: OK
[   48.440563] Testing event power_frequency: OK
[   48.460551] Testing event power_end: OK
[   48.480553] Testing event workqueue_insertion: OK
[   48.500539] Testing event workqueue_execution: OK
[   48.520563] Testing event workqueue_creation: OK
[   48.540556] Testing event workqueue_destruction: OK
[   48.560563] Testing event signal_generate: OK
[   48.580561] Testing event signal_deliver: OK
[   48.600561] Testing event signal_overflow_fail: OK
[   48.620556] Testing event signal_lose_info: OK
[   48.640543] Testing event timer_init: OK
[   48.660543] Testing event timer_start: 
[   48.676001] PPS event at 4294904465
[   48.680193] OK
[   48.681858] Testing event timer_expire_entry: OK
[   48.700551] Testing event timer_expire_exit: OK
[   48.720560] Testing event timer_cancel: OK
[   48.740557] Testing event hrtimer_init: OK
[   48.760559] Testing event hrtimer_start: OK
[   48.780554] Testing event hrtimer_expire_entry: OK
[   48.800546] Testing event hrtimer_expire_exit: OK
[   48.820562] Testing event hrtimer_cancel: OK
[   48.840556] Testing event itimer_state: OK
[   48.860541] Testing event itimer_expire: OK
[   48.880558] Testing event irq_handler_entry: OK
[   48.900554] Testing event irq_handler_exit: OK
[   48.920546] Testing event softirq_entry: OK
[   48.940539] Testing event softirq_exit: OK
[   48.960566] Testing event sched_kthread_stop: OK
[   48.980559] Testing event sched_kthread_stop_ret: OK
[   49.000560] Testing event sched_wait_task: OK
[   49.020556] Testing event sched_wakeup: OK
[   49.040539] Testing event sched_wakeup_new: OK
[   49.060556] Testing event sched_switch: OK
[   49.080557] Testing event sched_migrate_task: OK
[   49.100559] Testing event sched_process_free: OK
[   49.120554] Testing event sched_process_exit: OK
[   49.140539] Testing event sched_process_wait: OK
[   49.160556] Testing event sched_process_fork: OK
[   49.180557] Testing event sched_stat_wait: OK
[   49.200559] Testing event sched_stat_sleep: OK
[   49.220554] Testing event sched_stat_iowait: OK
[   49.240539] Testing event sched_stat_runtime: OK
[   49.260556] Testing event mce_record: OK
[   49.280558] Testing event sys_enter: OK
[   49.300561] Testing event sys_exit: OK
[   49.320554] Running tests on trace event systems:
[   49.324003] Testing event system skb: OK
[   49.344660] Testing event system scsi: OK
[   49.364793] Testing event system bkl: OK
[   49.384642] Testing event system block: OK
[   49.405423] Testing event system gfs2: OK
[   49.425026] Testing event system xfs: OK
[   49.484002] Testing event system jbd2: OK
[   49.505031] Testing event system ext4: OK
[   49.526411] Testing event system kmem: OK
[   49.545121] Testing event system power: OK
[   49.564722] Testing event system workqueue: OK
[   49.584740] Testing event system signal: OK
[   49.604738] Testing event system timer: OK
[   49.625119] Testing event system irq: OK
[   49.644739] Testing event system sched: OK
[   49.665269] Testing event system syscalls: 
[   49.676032] PPS event at 4294904715
[   49.684511] OK
[   49.686174] Testing event system mce: OK
[   49.704607] Testing event system raw_syscalls: OK
[   49.724661] Running tests on all trace events:
[   49.728002] Testing all events: OK
[   49.816756] initcall event_trace_self_tests_init+0x0/0x20d returned 0 after 7812500 usecs
[   49.824006] calling  fail_page_alloc_debugfs+0x0/0xc1 @ 1
[   49.828105] initcall fail_page_alloc_debugfs+0x0/0xc1 returned 0 after 0 usecs
[   49.836003] calling  max_swapfiles_check+0x0/0x7 @ 1
[   49.840003] initcall max_swapfiles_check+0x0/0x7 returned 0 after 0 usecs
[   49.848003] calling  failslab_debugfs_init+0x0/0x8c @ 1
[   49.852098] initcall failslab_debugfs_init+0x0/0x8c returned 0 after 0 usecs
[   49.860238] calling  init_ima+0x0/0x14 @ 1
[   49.864060] IMA: No TPM chip found, activating TPM-bypass!
[   49.868046] initcall init_ima+0x0/0x14 returned 0 after 3906 usecs
[   49.876009] calling  fail_make_request_debugfs+0x0/0x14 @ 1
[   49.880081] initcall fail_make_request_debugfs+0x0/0x14 returned 0 after 0 usecs
[   49.888003] calling  fail_io_timeout_debugfs+0x0/0x14 @ 1
[   49.896071] initcall fail_io_timeout_debugfs+0x0/0x14 returned 0 after 0 usecs
[   49.900005] calling  random32_reseed+0x0/0x9d @ 1
[   49.908018] initcall random32_reseed+0x0/0x9d returned 0 after 0 usecs
[   49.912003] calling  pci_resource_alignment_sysfs_init+0x0/0x14 @ 1
[   49.920015] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 0 usecs
[   49.928003] calling  pci_sysfs_init+0x0/0x44 @ 1
[   49.932725] initcall pci_sysfs_init+0x0/0x44 returned 0 after 0 usecs
[   49.940004] calling  regulator_init_complete+0x0/0xf6 @ 1
[   49.944004] initcall regulator_init_complete+0x0/0xf6 returned 0 after 0 usecs
[   49.952003] calling  seqgen_init+0x0/0xe @ 1
[   49.956020] initcall seqgen_init+0x0/0xe returned 0 after 0 usecs
[   49.964006] calling  late_resume_init+0x0/0x10d @ 1
[   49.968002]   Magic number: 14:428:449
[   49.972448] initcall late_resume_init+0x0/0x10d returned 0 after 3906 usecs
[   49.980005] calling  hd_init+0x0/0x28c @ 1
[   49.984065] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[   49.992036] initcall hd_init+0x0/0x28c returned -1 after 7812 usecs
[   49.996003] initcall hd_init+0x0/0x28c returned with error code -1 
[   50.004004] calling  scsi_complete_async_scans+0x0/0x123 @ 1
[   50.008003] initcall scsi_complete_async_scans+0x0/0x123 returned 0 after 0 usecs
[   50.016003] calling  rtc_hctosys+0x0/0x13e @ 1
[   50.020019] rtc-test rtc-test.0: setting system clock to 2010-06-11 21:25:29 UTC (1276291529)
[   50.028010] initcall rtc_hctosys+0x0/0x13e returned 0 after 7812 usecs
[   50.036003] calling  edd_init+0x0/0x2d5 @ 1
[   50.040003] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[   50.044096] initcall edd_init+0x0/0x2d5 returned 0 after 3906 usecs
[   50.052005] calling  tcp_congestion_default+0x0/0xf @ 1
[   50.056005] initcall tcp_congestion_default+0x0/0xf returned 0 after 0 usecs
[   50.064004] calling  ip_auto_config+0x0/0xd2b @ 1
[   50.068015] initcall ip_auto_config+0x0/0xd2b returned 0 after 0 usecs
[   50.076003] calling  initialize_hashrnd+0x0/0x16 @ 1
[   50.080008] initcall initialize_hashrnd+0x0/0x16 returned 0 after 0 usecs
[   50.088231] async_waiting @ 1
[   50.092003] async_continuing @ 1 after 0 usec
[   50.096076] md: Waiting for all devices to be available before autodetect
[   50.100002] md: If you don't use raid, use raid=noautodetect
[   50.108002] async_waiting @ 1
[   50.112002] async_continuing @ 1 after 0 usec
[   50.116070] device: 'md0': device_add
[   50.120064] PM: Adding info for No Bus:md0
[   50.124140] device: '9:0': device_add
[   50.128024] PM: Adding info for No Bus:9:0
[   50.132129] md: Autodetecting RAID arrays.
[   50.136003] md: Scanned 0 and added 0 devices.
[   50.140001] md: autorun ...
[   50.142814] md: ... autorun DONE.
[   50.160050] EXT3-fs (sda1): recovery required on readonly filesystem
[   50.164197] EXT3-fs (sda1): write access will be enabled during recovery
[   50.176074] EXT3-fs: barriers not enabled
[   50.208072] kjournald starting.  Commit interval 5 seconds
[   50.208072] EXT3-fs (sda1): recovery complete
[   50.216034] EXT3-fs (sda1): mounted filesystem with writeback data mode
[   50.224272] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[   50.228085] async_waiting @ 1
[   50.232002] async_continuing @ 1 after 0 usec
[   50.236002] debug: unmapping init memory 422d1000..42375000
[   50.280105] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
[   50.676005] PPS event at 4294904965
[   51.676006] PPS event at 4294905215
[   52.676005] PPS event at 4294905465
[   53.276311] md: Autodetecting RAID arrays.
[   53.280003] md: Scanned 0 and added 0 devices.
[   53.288004] md: autorun ...
[   53.290832] md: ... autorun DONE.
[   53.676005] PPS event at 4294905715
[   54.084345] device: 'md1': device_add
[   54.088083] PM: Adding info for No Bus:md1
[   54.092138] device: '9:1': device_add
[   54.096038] PM: Adding info for No Bus:9:1
[   54.572083] EXT3-fs (sda1): using internal journal
[   54.652111] EXT3-fs: barriers not enabled
[   54.656055] kjournald starting.  Commit interval 5 seconds
[   54.660011] EXT3-fs (sda5): using internal journal
[   54.666132] EXT3-fs (sda5): mounted filesystem with writeback data mode
[   54.676004] PPS event at 4294905965
[   55.680006] PPS event at 4294906216
[   55.788980] rc.sysinit used greatest stack depth: 1732 bytes left
[   56.680005] PPS event at 4294906466
[   57.680001] PPS event at 4294906716
[   58.680011] PPS event at 4294906966
[   59.448967] Adding 3911820k swap on /dev/sda2.  Priority:-1 extents:1 across:3911820k 
[   59.680055] PPS event at 4294907216
[   60.680008] PPS event at 4294907466
[   60.785517] ssh used greatest stack depth: 1716 bytes left
[   61.121417] device: 'vcs3': device_add
[   61.121629] PM: Adding info for No Bus:vcs3
[   61.121695] device: 'vcsa3': device_add
[   61.129414] PM: Adding info for No Bus:vcsa3
[   61.145736] device: 'vcs4': device_add
[   61.145965] PM: Adding info for No Bus:vcs4
[   61.146029] device: 'vcsa4': device_add
[   61.146101] PM: Adding info for No Bus:vcsa4
[   61.148085] device: 'vcs10': device_add
[   61.148174] PM: Adding info for No Bus:vcs10
[   61.148227] device: 'vcsa10': device_add
[   61.148298] PM: Adding info for No Bus:vcsa10
[   61.152050] device: 'vcs8': device_add
[   61.152128] PM: Adding info for No Bus:vcs8
[   61.152180] device: 'vcsa8': device_add
[   61.152251] PM: Adding info for No Bus:vcsa8
[   61.160734] device: 'vcs7': device_add
[   61.160961] PM: Adding info for No Bus:vcs7
[   61.161025] device: 'vcsa7': device_add
[   61.161102] PM: Adding info for No Bus:vcsa7
[   61.176097] device: 'vcs9': device_add
[   61.176268] PM: Adding info for No Bus:vcs9
[   61.176333] device: 'vcsa9': device_add
[   61.176418] PM: Adding info for No Bus:vcsa9
[   61.180006] device: 'vcs6': device_add
[   61.180006] PM: Adding info for No Bus:vcs6
[   61.180006] device: 'vcsa6': device_add
[   61.180006] PM: Adding info for No Bus:vcsa6
[   61.196042] device: 'vcs5': device_add
[   61.196119] PM: Adding info for No Bus:vcs5
[   61.196171] device: 'vcsa5': device_add
[   61.196243] PM: Adding info for No Bus:vcsa5
[   61.215235] device: 'vcs2': device_add
[   61.215364] PM: Adding info for No Bus:vcs2
[   61.215433] device: 'vcsa2': device_add
[   61.215512] PM: Adding info for No Bus:vcsa2
[   61.680004] PPS event at 4294907716
[   62.680006] PPS event at 4294907966
[   63.680005] PPS event at 4294908216
[   64.680006] PPS event at 4294908466
[   65.680002] PPS event at 4294908716
[   66.680006] PPS event at 4294908966
[   67.680006] PPS event at 4294909216
[   68.680006] PPS event at 4294909466
[   69.680002] PPS event at 4294909716
[   70.680001] PPS event at 4294909966
[   71.680006] PPS event at 4294910216
[   72.680002] PPS event at 4294910466
[   73.680002] PPS event at 4294910716
[   74.680004] PPS event at 4294910966
[   75.680002] PPS event at 4294911216
[   76.680005] PPS event at 4294911466
[   77.680006] PPS event at 4294911716
[   78.680002] PPS event at 4294911966
[   79.680002] PPS event at 4294912216
[   80.680001] PPS event at 4294912466
[   81.680006] PPS event at 4294912716
[   82.680006] PPS event at 4294912966
[   83.680002] PPS event at 4294913216
[   84.680004] PPS event at 4294913466
[   85.680002] PPS event at 4294913716
[   86.680002] PPS event at 4294913966
[   87.680002] PPS event at 4294914216
[   88.680001] PPS event at 4294914466
[   89.680006] PPS event at 4294914716
[   90.680006] PPS event at 4294914966
[   91.680002] PPS event at 4294915216
[   92.680004] PPS event at 4294915466
[   93.680002] PPS event at 4294915716
[   94.680001] PPS event at 4294915966
[   95.680002] PPS event at 4294916216
[   96.680002] PPS event at 4294916466
[   97.680006] PPS event at 4294916716
[   98.680011] PPS event at 4294916966
[   99.680004] PPS event at 4294917216
[  100.680002] PPS event at 4294917466
[  101.680002] PPS event at 4294917716
[  102.680005] PPS event at 4294917966
[  103.680001] PPS event at 4294918216
[  104.680001] PPS event at 4294918466
[  105.680001] PPS event at 4294918716
[  106.680006] PPS event at 4294918966
[  107.680006] PPS event at 4294919216
[  108.680001] PPS event at 4294919466
[  109.680006] PPS event at 4294919716
[  110.680001] PPS event at 4294919966
[  111.680001] PPS event at 4294920216
[  112.680003] PPS event at 4294920466
[  113.680001] PPS event at 4294920716
[  114.680001] PPS event at 4294920966
[  115.680001] PPS event at 4294921216
[  116.680006] PPS event at 4294921466
[  117.680006] PPS event at 4294921716
[  118.680001] PPS event at 4294921966
[  119.680002] PPS event at 4294922216
[  120.680004] PPS event at 4294922466
[  121.680002] PPS event at 4294922716
[  122.680001] PPS event at 4294922966
[  123.680006] PPS event at 4294923216
[  124.680001] PPS event at 4294923466
[  125.680001] PPS event at 4294923716
[  126.680008] PPS event at 4294923966
[  127.680011] PPS event at 4294924216
[  128.680006] PPS event at 4294924466
[  129.680001] PPS event at 4294924716
[  130.680001] PPS event at 4294924966
[  131.680001] PPS event at 4294925216
[  132.680005] PPS event at 4294925466
[  133.680001] PPS event at 4294925716
[  134.680001] PPS event at 4294925966
[  135.680003] PPS event at 4294926216

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11  8:32       ` Ingo Molnar
  0 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-11  8:32 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Linus Torvalds, Rafael J. Wysocki, Carl Worth, Eric Anholt,
	Venkatesh Pallipadi, Dave Airlie, Jesse Barnes, David H?rdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

[-- Attachment #1: Type: text/plain, Size: 6400 bytes --]


* Jens Axboe <jaxboe-5c4llco8/ftWk0Htik3J/w@public.gmane.org> wrote:

> On 2010-06-09 03:53, Linus Torvalds wrote:
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >> Submitter	: Jan Kreuzer <kontrollator-Mmb7MZpHnFY@public.gmane.org>
> >> Date		: 2010-06-05 06:15 (4 days old)
> > 
> > This seems to have been introduced by
> > 
> > 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> > 	Author: Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org>
> > 	Date:   Sat Nov 8 17:05:38 2008 +0100
> > 
> > 	    sched: optimize sched_clock() a bit
> >     
> > 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> > 	    variant of __cycles_2_ns().
> >     
> > 	    Most of the time sched_clock() is called with irqs disabled already.
> > 	    The few places that call it with irqs enabled need to be updated.
> >     
> > 	    Signed-off-by: Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org>
> > 
> > and this seems to be one of those calling cases that need to be updated.
> > 
> > Ingo? The call trace is:
> > 
> > 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> > 	caller is native_sched_clock+0x3c/0x68
> > 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> > 	Call Trace:
> > 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> > 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> > 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> > 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> > 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> > 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> > 	[<ffffffff81215537>] __make_request+0x338/0x45b
> > 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> > 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> > 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> > 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> > 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> > 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> > 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> > 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> > 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> > 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> > 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> > 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> > 
> > (from the bugzilla thing)
> 
> This should be fixed by commit 28f4197e which was merged on friday.

Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
configs i get bad spinlock warnings during bootup:

[   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
[   28.972003] calling  b44_init+0x0/0x55 @ 1
[   28.976009] bus: 'pci': add driver b44
[   28.976374]  sda:
[   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
[   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
[   28.980000] Call Trace:
[   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
[   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
[   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
[   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
[   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
[   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
[   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
[   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
[   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
[   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
[   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
[   28.980000]  [<4132dd64>] __make_request+0x335/0x376
[   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
[   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
[   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
[   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
[   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
[   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
[   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
[   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
[   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
[   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
[   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
[   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
[   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
[   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
[   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
[   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
[   28.980000]  [<41088904>] read_cache_page+0xb/0x12
[   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
[   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
[   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
[   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
[   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
[   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
[   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
[   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
[   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
[   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
[   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
[   28.980000]  [<41332815>] add_disk+0x57/0x95
[   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
[   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
[   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
[   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
[   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
[   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
[   28.980000]  [<410433df>] kthread+0x5f/0x64
[   28.980000]  [<41043380>] ? kthread+0x0/0x64
[   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
[   29.264071] async/1 used greatest stack depth: 2336 bytes left
[   29.267020] bus: 'ssb': add driver b44
[   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
[   29.267076] calling  init_nic+0x0/0x16 @ 1

Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
attached. Reproducible on that sha1 and with that config.

Thanks,

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 73548 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35-rc2
# Fri Jun 11 12:25:08 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_PCI_QUIRKS is not set
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
CONFIG_SLOW_WORK_DEBUG=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
CONFIG_MVIAC3_2=y
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_INJECT=y
# CONFIG_VM86 is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_1G=y
CONFIG_PAGE_OFFSET=0x40000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_VERBOSE=y
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_PM_RUNTIME is not set
CONFIG_PM_OPS=y
# CONFIG_ACPI is not set
CONFIG_SFI=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCMCIA_PROBE=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
CONFIG_TCP_CONG_LP=y
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
CONFIG_IP_VS=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
# CONFIG_IP_VS_LBLC is not set
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
# CONFIG_IP_VS_NQ is not set

#
# IPVS application helper
#
# CONFIG_IP_VS_FTP is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_DCCP=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
# CONFIG_RDS_TCP is not set
CONFIG_RDS_DEBUG=y
# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
# CONFIG_ATM_BR2684 is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
# CONFIG_L2TP_ETH is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_RPS=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_L2CAP_EXT_FEATURES=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
# CONFIG_BT_BNEP_PROTO_FILTER is not set
# CONFIG_BT_CMTP is not set
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
# CONFIG_BT_ATH3K is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT_SYSFS is not set
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set

#
# CFG80211 needs to be enabled for MAC80211
#

#
# Some wireless drivers require a rate control algorithm
#
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
# CONFIG_PNPACPI is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_BLK_DEV_HD=y
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=y
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=y
# CONFIG_HP_ILO is not set
CONFIG_ISL29003=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=y
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=y
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_DTC3280=y
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_GENERIC_NCR5380=y
CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_NCR53C406A=y
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_PAS16=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
# CONFIG_SCSI_T128 is not set
CONFIG_SCSI_U14_34F=y
# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
# CONFIG_SCSI_ULTRASTOR is not set
CONFIG_SCSI_NSP32=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_SRP=y
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
# CONFIG_PATA_CMD64X is not set
CONFIG_PATA_CS5520=y
# CONFIG_PATA_CS5530 is not set
CONFIG_PATA_CS5535=y
# CONFIG_PATA_CS5536 is not set
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
# CONFIG_PATA_HPT366 is not set
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
# CONFIG_PATA_NETCELL is not set
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SC1200=y
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_QDI=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_WINBOND_VLB=y

#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MULTICORE_RAID456=y
CONFIG_MD_RAID6_PQ=y
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
# CONFIG_BLK_DEV_DM is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# The newer stack is recommended.
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
# CONFIG_IEEE1394 is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
# CONFIG_I2O_BUS is not set
# CONFIG_I2O_BLOCK is not set
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_EQUALIZER=y
CONFIG_TUN=y
CONFIG_VETH=y
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_LANCE=y
CONFIG_NET_VENDOR_SMC=y
# CONFIG_WD80x3 is not set
CONFIG_ULTRA=y
# CONFIG_SMC9194 is not set
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=y
CONFIG_NI65=y
CONFIG_DNET=y
# CONFIG_NET_TULIP is not set
CONFIG_AT1700=y
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_CS89x0=y
CONFIG_E100=y
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
CONFIG_SIS900=y
CONFIG_EPIC100=y
# CONFIG_SMSC9420 is not set
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
# CONFIG_TLAN is not set
CONFIG_KS8842=y
# CONFIG_KS8851_MLL is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_SC92031=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
# CONFIG_DE600 is not set
CONFIG_DE620=y
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IP1000=y
# CONFIG_IGB is not set
CONFIG_IGBVF=y
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_R8169_VLAN is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_CNIC=y
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=y
CONFIG_ATL1E=y
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4_DEPENDS=y
CONFIG_CHELSIO_T4=y
CONFIG_ENIC=y
# CONFIG_IXGBE is not set
CONFIG_IXGBEVF=y
CONFIG_IXGB=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_MYRI10GE=y
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
# CONFIG_MLX4_DEBUG is not set
CONFIG_TEHUTI=y
CONFIG_BNX2X=y
CONFIG_QLCNIC=y
CONFIG_QLGE=y
CONFIG_SFC=y
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMTR is not set
CONFIG_IBMOL=y
CONFIG_IBMLS=y
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
CONFIG_SMCTR=y
CONFIG_WLAN=y
CONFIG_AIRO=y
# CONFIG_ATMEL is not set
CONFIG_PRISM54=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set

#
# WiMAX Wireless Broadband devices
#

#
# Enable MMC support to see WiMAX SDIO drivers
#
# CONFIG_WIMAX_I2400M_USB is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=y
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_HSO is not set
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_CDC_PHONET=y
CONFIG_USB_IPHETH=y
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=y
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
CONFIG_ATM_HORIZON=y
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=y
CONFIG_IEEE802154_DRIVERS=y
# CONFIG_IEEE802154_FAKEHARD is not set

#
# CAIF transport drivers
#
# CONFIG_CAIF_TTY is not set
# CONFIG_FDDI is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=y
# CONFIG_PPPOATM is not set
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VMXNET3=y
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=y
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=y
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=y

#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
CONFIG_CAPI_EICON=y
# CONFIG_ISDN_DIVAS is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_DUMMYLL is not set
# CONFIG_GIGASET_BASE is not set
CONFIG_GIGASET_M105=y
# CONFIG_GIGASET_M101 is not set
CONFIG_GIGASET_DEBUG=y
# CONFIG_MISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_KBTAB=y
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879=y
# CONFIG_TOUCHSCREEN_DA9034 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=y
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_MCS5000=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_HTCPEN is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
CONFIG_TOUCHSCREEN_USB_3M=y
# CONFIG_TOUCHSCREEN_USB_ITM is not set
CONFIG_TOUCHSCREEN_USB_ETURBO=y
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
# CONFIG_TOUCHSCREEN_USB_ETT_TC5UH is not set
CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_APANEL=y
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_WINBOND_CIR=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_WM831X_ON=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_ISI=y
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=y
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_DTLK=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
# CONFIG_MWAVE is not set
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_CS5535_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
CONFIG_SCx200_I2C=y
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO expanders:
#
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_SCH=y

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=y
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TC35892=y
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8994=y
CONFIG_GPIO_ADP5588=y

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_TIMBERDALE is not set
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders:
#

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
# CONFIG_WM831X_POWER is not set
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_OLPC is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_DA9030 is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_HDAPS is not set
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_SENSORS_APPLESMC=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=y
# CONFIG_ALIM7101_WDT is not set
CONFIG_GEODE_WDT=y
CONFIG_SC520_WDT=y
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=y
# CONFIG_SC1200_WDT is not set
CONFIG_SCx200_WDT=y
# CONFIG_PC87413_WDT is not set
CONFIG_60XX_WDT=y
# CONFIG_SBC8360_WDT is not set
CONFIG_SBC7240_WDT=y
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_W83627HF_WDT=y
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y

#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=y
CONFIG_MIXCOMWD=y
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
# CONFIG_TWL4030_CORE is not set
CONFIG_MFD_TC35892=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
# CONFIG_AB3550_CORE is not set
CONFIG_MFD_TIMBERDALE=y
CONFIG_LPC_SCH=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_BQ24022=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_WM831X=y
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_KMS is not set
CONFIG_DRM_MGA=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX1=y
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_DA903X=y
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_WM831X is not set
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_88PM860X=y

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_VMIDI=y
# CONFIG_SOUND_TRIX is not set
CONFIG_SOUND_MSS=y
# CONFIG_SOUND_MPU401 is not set
CONFIG_SOUND_PAS=y
CONFIG_PAS_JOYSTICK=y
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
CONFIG_SOUND_YM3812=y
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# Special HID drivers
#
CONFIG_HID_3M_PCT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CANDO is not set
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EGALAX=y
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MOSART=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_FB is not set
CONFIG_HID_PICOLCD_BACKLIGHT=y
# CONFIG_HID_PICOLCD_LCD is not set
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_QUANTA=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_ROCCAT_KONE=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_STANTUM=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_WACOM=y
# CONFIG_HID_WACOM_POWER_SUPPLY is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_FUNSOFT=y
CONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_MOTOROLA=y
CONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=y
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=y
CONFIG_USB_SERIAL_ZIO=y
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_WLP=y
CONFIG_UWB_I1480U=y
CONFIG_UWB_I1480U_WLP=y
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_NET48XX is not set
# CONFIG_LEDS_WRAP is not set
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_DA903X is not set
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_AMSO1100 is not set
CONFIG_INFINIBAND_CXGB3=y
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=y
CONFIG_MLX4_INFINIBAND=y
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_MAX8925 is not set
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_WM831X=y

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_DELL_LAPTOP=y

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_EXT4_DEBUG=y
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=y
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTRS is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
# CONFIG_ACORN_PARTITION_RISCIX is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_LKDTM is not set
CONFIG_CPU_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_KSYM_TRACER=y
# CONFIG_PROFILE_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
CONFIG_WORKQUEUE_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_EVENT_TRACE_TEST_SYSCALLS is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
# CONFIG_KDB_KEYBOARD is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="tomoyo"
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
# CONFIG_CRYPTO_DEV_GEODE is not set
CONFIG_CRYPTO_DEV_HIFN_795X=y
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_NLATTR=y

[-- Attachment #3: boot.log --]
[-- Type: text/plain, Size: 548214 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35-rc2-00131-g7908a9e (mingo@sirius) (gcc version 4.4.4 20100514 (Red Hat 4.4.4-3) (GCC) ) #8184 SMP Fri Jun 11 12:26:19 CEST 2010
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.3 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 02c00000
[    0.000000] Scan SMP from 40000000 for 1024 bytes.
[    0.000000] Scan SMP from 4009fc00 for 1024 bytes.
[    0.000000] Scan SMP from 400f0000 for 65536 bytes.
[    0.000000] found SMP MP-table at [400f5680] f5680
[    0.000000]   mpc: f1400-f152c
[    0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
[    0.000000]  0000000000 - 003fff0000 page 4k
[    0.000000] kernel direct mapping tables up to 3fff0000 @ 100000-204000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 1023MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 3fff0000
[    0.000000]   low ram: 0 - 3fff0000
[    0.000000] early_res array is doubled to 64 at [11080 - 1187f]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0003fff0
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262015
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 2016 pages used for memmap
[    0.000000]   Normal zone: 256016 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000]   mpc: f1400-f152c
[    0.000000] MPTABLE: OEM ID: OEM00000
[    0.000000] MPTABLE: Product ID: PROD00000000
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] Processor #1
[    0.000000] Bus #0 is PCI   
[    0.000000] Bus #1 is PCI   
[    0.000000] Bus #2 is PCI   
[    0.000000] Bus #3 is PCI   
[    0.000000] Bus #4 is PCI   
[    0.000000] Bus #5 is PCI   
[    0.000000] Bus #6 is ISA   
[    0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 1-24
[    0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b
[    0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03
[    0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
[    0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b
[    0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
[    0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
[    0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
[    0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
[    0.000000] Processors: 2
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] nr_irqs_gsi: 41
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 15 pages/cpu @43000000 s45272 r0 d16168 u2097152
[    0.000000] pcpu-alloc: s45272 r0 d16168 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
[    0.000000] Kernel command line: root=/dev/sda1 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 3
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Subtract (47 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0001000000 - 0002619de0]   TEXT DATA BSS
[    0.000000]   #3 [000261a000 - 0002625149]             BRK
[    0.000000]   #4 [00000f5690 - 0000100000]   BIOS reserved
[    0.000000]   #5 [00000f5680 - 00000f5690]    MP-table mpf
[    0.000000]   #6 [000009f800 - 00000f1400]   BIOS reserved
[    0.000000]   #7 [00000f152c - 00000f5680]   BIOS reserved
[    0.000000]   #8 [00000f1400 - 00000f152c]    MP-table mpc
[    0.000000]   #9 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #10 [0000100000 - 00001f7000]         PGTABLE
[    0.000000]   #11 [0002626000 - 0002627000]         BOOTMEM
[    0.000000]   #12 [0000011000 - 0000011080]         BOOTMEM
[    0.000000]   #13 [0002627000 - 00026a7000]         BOOTMEM
[    0.000000]   #14 [00026a7000 - 0002727000]         BOOTMEM
[    0.000000]   #15 [0002727000 - 00027a7000]         BOOTMEM
[    0.000000]   #16 [00027a7000 - 0002827000]         BOOTMEM
[    0.000000]   #17 [0002827000 - 00028a7000]         BOOTMEM
[    0.000000]   #18 [00028a7000 - 0002927000]         BOOTMEM
[    0.000000]   #19 [0002927000 - 00029a7000]         BOOTMEM
[    0.000000]   #20 [00029a7000 - 0002a27000]         BOOTMEM
[    0.000000]   #21 [0002a27000 - 0002aa7000]         BOOTMEM
[    0.000000]   #22 [0002aa7000 - 0002b27000]         BOOTMEM
[    0.000000]   #23 [0002b27000 - 0002ba7000]         BOOTMEM
[    0.000000]   #24 [0002ba7000 - 0002c27000]         BOOTMEM
[    0.000000]   #25 [0002c27000 - 0002ca7000]         BOOTMEM
[    0.000000]   #26 [0002ca7000 - 0002d27000]         BOOTMEM
[    0.000000]   #27 [0002d27000 - 0002da7000]         BOOTMEM
[    0.000000]   #28 [0002da7000 - 0002e27000]         BOOTMEM
[    0.000000]   #29 [0002e27000 - 0002e3f000]         BOOTMEM
[    0.000000]   #30 [0002e3f000 - 0002e57000]         BOOTMEM
[    0.000000]   #31 [0002619de0 - 0002619e07]         BOOTMEM
[    0.000000]   #32 [0002619e20 - 0002619f1c]         BOOTMEM
[    0.000000]   #33 [0002619f20 - 0002619f30]         BOOTMEM
[    0.000000]   #34 [0002619f40 - 0002619ff5]         BOOTMEM
[    0.000000]   #35 [0002625160 - 0002625215]         BOOTMEM
[    0.000000]   #36 [0003000000 - 000300f000]         BOOTMEM
[    0.000000]   #37 [0003200000 - 000320f000]         BOOTMEM
[    0.000000]   #38 [0002625220 - 0002625224]         BOOTMEM
[    0.000000]   #39 [0002625240 - 0002625244]         BOOTMEM
[    0.000000]   #40 [0002625260 - 0002625268]         BOOTMEM
[    0.000000]   #41 [0002625280 - 0002625288]         BOOTMEM
[    0.000000]   #42 [00026252a0 - 0002625348]         BOOTMEM
[    0.000000]   #43 [0002625360 - 00026253c8]         BOOTMEM
[    0.000000]   #44 [0002e57000 - 0002e5b000]         BOOTMEM
[    0.000000]   #45 [0002e5b000 - 0002edb000]         BOOTMEM
[    0.000000]   #46 [0002edb000 - 0002f1b000]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 1015092k/1048512k available (11925k kernel code, 32968k reserved, 7341k data, 656k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffa98000 - 0xfffff000   (5532 kB)
[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.000000]     vmalloc : 0x807f0000 - 0xff3fe000   (2028 MB)
[    0.000000]     lowmem  : 0x40000000 - 0x7fff0000   (1023 MB)
[    0.000000]       .init : 0x422d1000 - 0x42375000   ( 656 kB)
[    0.000000]       .data : 0x41ba5570 - 0x422d0b8c   (7341 kB)
[    0.000000]       .text : 0x41000000 - 0x41ba5570   (11925 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU debugfs-based tracing is enabled.
[    0.000000] 	Hierarchical RCU autobalancing is disabled.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:1280
[    0.000000] CPU 0 irqstacks, hard=43000000 soft=43001000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.000000] ------------------------
[    0.000000] | Locking API testsuite:
[    0.000000] ----------------------------------------------------------------------------
[    0.000000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                     double unlock:  ok  |  ok  |failed|  ok  |failed|failed|
[    0.000000]                   initialize held:failed|failed|failed|failed|failed|failed|
[    0.000000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]               recursive read-lock:             |  ok  |             |failed|
[    0.000000]            recursive read-lock #2:             |  ok  |             |failed|
[    0.000000]             mixed read-write-lock:             |failed|             |failed|
[    0.000000]             mixed write-read-lock:             |failed|             |failed|
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       hard-irq read-recursion/123:  ok  |
[    0.000000]       soft-irq read-recursion/123:  ok  |
[    0.000000]       hard-irq read-recursion/132:  ok  |
[    0.000000]       soft-irq read-recursion/132:  ok  |
[    0.000000]       hard-irq read-recursion/213:  ok  |
[    0.000000]       soft-irq read-recursion/213:  ok  |
[    0.000000]       hard-irq read-recursion/231:  ok  |
[    0.000000]       soft-irq read-recursion/231:  ok  |
[    0.000000]       hard-irq read-recursion/312:  ok  |
[    0.000000]       soft-irq read-recursion/312:  ok  |
[    0.000000]       hard-irq read-recursion/321:  ok  |
[    0.000000]       soft-irq read-recursion/321:  ok  |
[    0.000000] --------------------------------------------------------
[    0.000000] 142 out of 218 testcases failed, as expected. |
[    0.000000] ----------------------------------------------------
[    0.000000] ODEBUG: 8 of 8 active objects replaced
[    0.000000] ODEBUG: selftest passed
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2010.275 MHz processor.
[    0.012005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.55 BogoMIPS (lpj=8041100)
[    0.020003] pid_max: default: 32768 minimum: 301
[    0.024074] Security Framework initialized
[    0.028012] TOMOYO Linux initialized
[    0.032161] Mount-cache hash table entries: 512
[    0.036399] Initializing cgroup subsys debug
[    0.040004] Initializing cgroup subsys ns
[    0.044004] Initializing cgroup subsys cpuacct
[    0.048006] Initializing cgroup subsys freezer
[    0.052003] Initializing cgroup subsys blkio
[    0.056068] CPU: Physical Processor ID: 0
[    0.060002] CPU: Processor Core ID: 0
[    0.064003] mce: CPU supports 5 MCE banks
[    0.068017] Performance Events: AMD PMU driver.
[    0.073530] ... version:                0
[    0.076002] ... bit width:              48
[    0.080002] ... generic registers:      4
[    0.084002] ... value mask:             0000ffffffffffff
[    0.088002] ... max period:             00007fffffffffff
[    0.092002] ... fixed-purpose events:   0
[    0.096002] ... event mask:             000000000000000f
[    0.104904] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.108007] enabled ExtINT on CPU#0
[    0.112048] ExtINT not setup in hardware but reported by MP table
[    0.120028] ENABLING IO-APIC IRQs
[    0.123336] init IO_APIC IRQs
[    0.124002]  2-0 (apicid-pin) not connected
[    0.128007] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[    0.132008] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[    0.136007] IOAPIC[0]: Set routing entry (2-3 -> 0x29 -> IRQ 29 Mode:1 Active:1)
[    0.140000] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-5 -> 0x41 -> IRQ 31 Mode:1 Active:1)
[    0.140000] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-11 -> 0x49 -> IRQ 37 Mode:1 Active:1)
[    0.140000] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[    0.140000]  2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
[    0.140000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.140000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.140000] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.140000] ..... (found apic 0 pin 0) ...
[    0.182315] ....... works.
[    0.184001] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[    0.192002] Using local APIC timer interrupts.
[    0.192003] calibrating APIC timer ...
[    0.200000] ... lapic delta = 1256509
[    0.200000] ..... delta 1256509
[    0.200000] ..... mult: 53963277
[    0.200000] ..... calibration result: 804165
[    0.200000] ..... CPU clock speed is 2010.1659 MHz.
[    0.200000] ..... host bus clock speed is 201.0165 MHz.
[    0.200000] ... verify APIC timer
[    0.311691] ... jiffies delta = 25
[    0.312001] ... jiffies result ok
[    0.316017] calling  migration_init+0x0/0x3c @ 1
[    0.320005] initcall migration_init+0x0/0x3c returned 0 after 0 usecs
[    0.324003] calling  spawn_ksoftirqd+0x0/0x3c @ 1
[    0.328051] initcall spawn_ksoftirqd+0x0/0x3c returned 0 after 0 usecs
[    0.332005] calling  init_call_single_data+0x0/0x96 @ 1
[    0.336005] initcall init_call_single_data+0x0/0x96 returned 0 after 0 usecs
[    0.340004] calling  cpu_stop_init+0x0/0xab @ 1
[    0.344054] initcall cpu_stop_init+0x0/0xab returned 0 after 0 usecs
[    0.348004] calling  spawn_softlockup_task+0x0/0x65 @ 1
[    0.352045] initcall spawn_softlockup_task+0x0/0x65 returned 0 after 0 usecs
[    0.356005] calling  tracer_alloc_buffers+0x0/0x172 @ 1
[    0.360138] Testing tracer nop: PASSED
[    0.364757] initcall tracer_alloc_buffers+0x0/0x172 returned 0 after 3906 usecs
[    0.368003] calling  init_trace_printk+0x0/0x7 @ 1
[    0.372003] initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs
[    0.376003] calling  trace_workqueue_early_init+0x0/0x121 @ 1
[    0.380176] initcall trace_workqueue_early_init+0x0/0x121 returned 0 after 0 usecs
[    0.384302] CPU 1 irqstacks, hard=43200000 soft=43201000
[    0.388007] Booting Node   0, Processors  #1 Ok.
[    0.016000] Initializing CPU#1
[    0.016000] masked ExtINT on CPU#1
[    0.484093] Brought up 2 CPUs
[    0.488003] Total of 2 processors activated (8041.41 BogoMIPS).
[    0.496153] device: 'platform': device_add
[    0.500016] PM: Adding info for No Bus:platform
[    0.504094] bus: 'platform': registered
[    0.508006] Registering sysdev class 'cpu'
[    0.512048] Registering sysdev class 'memory'
[    0.516049] Registering sys device of class 'memory'
[    0.520006] Registering sys device 'memory0'
[    0.524045] Registering sys device of class 'memory'
[    0.528005] Registering sys device 'memory1'
[    0.532043] Registering sys device of class 'memory'
[    0.540005] Registering sys device 'memory2'
[    0.544043] Registering sys device of class 'memory'
[    0.548005] Registering sys device 'memory3'
[    0.552052] Registering sys device of class 'memory'
[    0.556005] Registering sys device 'memory4'
[    0.560044] Registering sys device of class 'memory'
[    0.568005] Registering sys device 'memory5'
[    0.572043] Registering sys device of class 'memory'
[    0.576005] Registering sys device 'memory6'
[    0.580043] Registering sys device of class 'memory'
[    0.584005] Registering sys device 'memory7'
[    0.588043] Registering sys device of class 'memory'
[    0.596005] Registering sys device 'memory8'
[    0.600043] Registering sys device of class 'memory'
[    0.604005] Registering sys device 'memory9'
[    0.608043] Registering sys device of class 'memory'
[    0.612005] Registering sys device 'memory10'
[    0.616043] Registering sys device of class 'memory'
[    0.624005] Registering sys device 'memory11'
[    0.628052] Registering sys device of class 'memory'
[    0.632005] Registering sys device 'memory12'
[    0.636044] Registering sys device of class 'memory'
[    0.640005] Registering sys device 'memory13'
[    0.644043] Registering sys device of class 'memory'
[    0.652005] Registering sys device 'memory14'
[    0.656043] Registering sys device of class 'memory'
[    0.660005] Registering sys device 'memory15'
[    0.664509] calling  init_mmap_min_addr+0x0/0x11 @ 1
[    0.668004] initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
[    0.676005] calling  init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[    0.684006] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[    0.692004] calling  net_ns_init+0x0/0x1a8 @ 1
[    0.696006] initcall net_ns_init+0x0/0x1a8 returned 0 after 0 usecs
[    0.704004] calling  e820_mark_nvs_memory+0x0/0x31 @ 1
[    0.708006] initcall e820_mark_nvs_memory+0x0/0x31 returned 0 after 0 usecs
[    0.716003] calling  cpufreq_tsc+0x0/0x25 @ 1
[    0.720004] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
[    0.724003] calling  pci_reboot_init+0x0/0x11 @ 1
[    0.728005] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.736003] calling  reboot_init+0x0/0x11 @ 1
[    0.740010] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.748003] calling  init_lapic_sysfs+0x0/0x28 @ 1
[    0.752002] Registering sysdev class 'lapic'
[    0.756042] Registering sys device of class 'lapic'
[    0.760005] Registering sys device 'lapic0'
[    0.764039] initcall init_lapic_sysfs+0x0/0x28 returned 0 after 11718 usecs
[    0.772004] calling  init_smp_flush+0x0/0x2a @ 1
[    0.776003] initcall init_smp_flush+0x0/0x2a returned 0 after 0 usecs
[    0.784004] calling  alloc_frozen_cpus+0x0/0x7 @ 1
[    0.788003] initcall alloc_frozen_cpus+0x0/0x7 returned 0 after 0 usecs
[    0.796003] calling  ksysfs_init+0x0/0x74 @ 1
[    0.800017] initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs
[    0.804003] calling  async_init+0x0/0x3d @ 1
[    0.808041] initcall async_init+0x0/0x3d returned 0 after 0 usecs
[    0.812004] calling  init_jiffies_clocksource+0x0/0xf @ 1
[    0.816006] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[    0.820003] calling  pm_init+0x0/0x2d @ 1
[    0.824019] initcall pm_init+0x0/0x2d returned 0 after 0 usecs
[    0.828003] calling  pm_disk_init+0x0/0x14 @ 1
[    0.832007] initcall pm_disk_init+0x0/0x14 returned 0 after 0 usecs
[    0.836004] calling  swsusp_header_init+0x0/0x26 @ 1
[    0.840005] initcall swsusp_header_init+0x0/0x26 returned 0 after 0 usecs
[    0.844003] calling  init_ftrace_syscalls+0x0/0x96 @ 1
[    0.852382] initcall init_ftrace_syscalls+0x0/0x96 returned 0 after 3906 usecs
[    0.856003] calling  init_hw_breakpoint+0x0/0xee @ 1
[    0.860040] initcall init_hw_breakpoint+0x0/0xee returned 0 after 0 usecs
[    0.864003] calling  init_zero_pfn+0x0/0x41 @ 1
[    0.868003] initcall init_zero_pfn+0x0/0x41 returned 0 after 0 usecs
[    0.872003] calling  filelock_init+0x0/0x27 @ 1
[    0.876009] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs
[    0.880003] calling  init_script_binfmt+0x0/0x11 @ 1
[    0.884004] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.888003] calling  init_elf_binfmt+0x0/0x11 @ 1
[    0.892003] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.896004] calling  debugfs_init+0x0/0x4a @ 1
[    0.900012] initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs
[    0.904003] calling  securityfs_init+0x0/0x41 @ 1
[    0.908017] initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs
[    0.912004] calling  calibrate_xor_blocks+0x0/0x139 @ 1
[    0.916004] xor: automatically using best checksumming function: pIII_sse
[    0.940003]    pIII_sse  :  6085.000 MB/sec
[    0.944002] xor: using function: pIII_sse (6085.000 MB/sec)
[    0.948008] initcall calibrate_xor_blocks+0x0/0x139 returned 0 after 31250 usecs
[    0.952003] calling  random32_init+0x0/0xca @ 1
[    0.956004] initcall random32_init+0x0/0xca returned 0 after 0 usecs
[    0.960003] calling  test_atomic64+0x0/0x2e0 @ 1
[    0.964004] atomic64 test passed for i386+ platform with CX8 and with SSE
[    0.968003] initcall test_atomic64+0x0/0x2e0 returned 0 after 3906 usecs
[    0.972003] calling  sfi_sysfs_init+0x0/0xba @ 1
[    0.976003] initcall sfi_sysfs_init+0x0/0xba returned 0 after 0 usecs
[    0.980003] calling  regulator_init+0x0/0x23 @ 1
[    0.984002] regulator: core version 0.5
[    0.988002] device class 'regulator': registering
[    0.992052] initcall regulator_init+0x0/0x23 returned 0 after 7812 usecs
[    0.996006] calling  early_resume_init+0x0/0x169 @ 1
[    1.000020] Time: 21:24:41  Date: 06/11/10
[    1.004004] initcall early_resume_init+0x0/0x169 returned 0 after 3906 usecs
[    1.008004] calling  cpufreq_core_init+0x0/0x8c @ 1
[    1.012009] initcall cpufreq_core_init+0x0/0x8c returned 0 after 0 usecs
[    1.016003] calling  cpuidle_init+0x0/0x32 @ 1
[    1.020009] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs
[    1.024004] calling  sock_init+0x0/0x51 @ 1
[    1.028068] initcall sock_init+0x0/0x51 returned 0 after 0 usecs
[    1.032004] calling  netpoll_init+0x0/0x39 @ 1
[    1.036003] initcall netpoll_init+0x0/0x39 returned 0 after 0 usecs
[    1.040003] calling  netlink_proto_init+0x0/0x159 @ 1
[    1.044028] NET: Registered protocol family 16
[    1.048029] initcall netlink_proto_init+0x0/0x159 returned 0 after 3906 usecs
[    1.052003] calling  olpc_init+0x0/0x14b @ 1
[    1.056003] initcall olpc_init+0x0/0x14b returned 0 after 0 usecs
[    1.060003] calling  bdi_class_init+0x0/0x40 @ 1
[    1.064004] device class 'bdi': registering
[    1.068071] initcall bdi_class_init+0x0/0x40 returned 0 after 3906 usecs
[    1.072003] calling  kobject_uevent_init+0x0/0x1e @ 1
[    1.076013] initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs
[    1.080003] calling  gpiolib_sysfs_init+0x0/0x7e @ 1
[    1.084002] device class 'gpio': registering
[    1.088067] initcall gpiolib_sysfs_init+0x0/0x7e returned 0 after 3906 usecs
[    1.092003] calling  pcibus_class_init+0x0/0x14 @ 1
[    1.096002] device class 'pci_bus': registering
[    1.100051] initcall pcibus_class_init+0x0/0x14 returned 0 after 3906 usecs
[    1.104003] calling  pci_driver_init+0x0/0xf @ 1
[    1.108062] bus: 'pci': registered
[    1.111466] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
[    1.112004] calling  lcd_class_init+0x0/0x3f @ 1
[    1.116002] device class 'lcd': registering
[    1.120062] initcall lcd_class_init+0x0/0x3f returned 0 after 3906 usecs
[    1.124003] calling  backlight_class_init+0x0/0x4d @ 1
[    1.128003] device class 'backlight': registering
[    1.132052] initcall backlight_class_init+0x0/0x4d returned 0 after 3906 usecs
[    1.136003] calling  video_output_class_init+0x0/0x14 @ 1
[    1.140002] device class 'video_output': registering
[    1.144051] initcall video_output_class_init+0x0/0x14 returned 0 after 3906 usecs
[    1.148004] calling  tty_class_init+0x0/0x2f @ 1
[    1.152002] device class 'tty': registering
[    1.156050] initcall tty_class_init+0x0/0x2f returned 0 after 3906 usecs
[    1.160004] calling  vtconsole_class_init+0x0/0xa1 @ 1
[    1.164002] device class 'vtconsole': registering
[    1.168055] device: 'vtcon0': device_add
[    1.172012] PM: Adding info for No Bus:vtcon0
[    1.176053] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 11718 usecs
[    1.180003] calling  i2c_init+0x0/0x35 @ 1
[    1.184075] bus: 'i2c': registered
[    1.188003] bus: 'i2c': add driver dummy
[    1.192054] i2c-core: driver [dummy] registered
[    1.196004] initcall i2c_init+0x0/0x35 returned 0 after 11718 usecs
[    1.200003] calling  amd_postcore_init+0x0/0x85 @ 1
[    1.204006] node 0 link 0: io port [1000, fffff]
[    1.208003] TOM: 0000000040000000 aka 1024M
[    1.212003] node 0 link 0: mmio [e0000000, efffffff]
[    1.216192] node 0 link 0: mmio [feb00000, fec0ffff]
[    1.224003] node 0 link 0: mmio [a0000, bffff]
[    1.228191] node 0 link 0: mmio [40000000, fed3ffff]
[    1.232191] bus: [00, ff] on node 0 link 0
[    1.236003] bus: 00 index 0 [io  0x0000-0xffff]
[    1.240002] bus: 00 index 1 [mem 0x40000000-0xffffffff]
[    1.244002] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff]
[    1.248002] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[    1.252003] initcall amd_postcore_init+0x0/0x85 returned 0 after 46875 usecs
[    1.256004] calling  arch_kdebugfs_init+0x0/0x1e @ 1
[    1.260009] initcall arch_kdebugfs_init+0x0/0x1e returned 0 after 0 usecs
[    1.264003] calling  init_pit_clocksource+0x0/0x9e @ 1
[    1.268003] initcall init_pit_clocksource+0x0/0x9e returned 0 after 0 usecs
[    1.272003] calling  mtrr_if_init+0x0/0x44 @ 1
[    1.276009] initcall mtrr_if_init+0x0/0x44 returned 0 after 0 usecs
[    1.280003] calling  kdump_buf_page_init+0x0/0x76 @ 1
[    1.284021] initcall kdump_buf_page_init+0x0/0x76 returned 0 after 0 usecs
[    1.288003] calling  pci_arch_init+0x0/0x42 @ 1
[    1.300444] PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5
[    1.304013] initcall pci_arch_init+0x0/0x42 returned 0 after 11718 usecs
[    1.308003] calling  topology_init+0x0/0x50 @ 1
[    1.312002] Registering sys device of class 'cpu'
[    1.316008] Registering sys device 'cpu0'
[    1.320050] Registering sys device of class 'cpu'
[    1.324005] Registering sys device 'cpu1'
[    1.328049] initcall topology_init+0x0/0x50 returned 0 after 15625 usecs
[    1.332003] calling  mtrr_init_finialize+0x0/0x35 @ 1
[    1.336004] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
[    1.340003] calling  param_sysfs_init+0x0/0x2c5 @ 1
[    1.380209] initcall param_sysfs_init+0x0/0x2c5 returned 0 after 35156 usecs
[    1.384004] calling  pm_sysrq_init+0x0/0x16 @ 1
[    1.388003] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
[    1.392003] calling  init_slow_work+0x0/0x51 @ 1
[    1.396021] initcall init_slow_work+0x0/0x51 returned 0 after 0 usecs
[    1.400003] calling  default_bdi_init+0x0/0x8c @ 1
[    1.404044] device: 'default': device_add
[    1.408018] PM: Adding info for No Bus:default
[    1.412064] initcall default_bdi_init+0x0/0x8c returned 0 after 7812 usecs
[    1.416004] calling  init_bio+0x0/0xf2 @ 1
[    1.420051] bio: create slab <bio-0> at 0
[    1.424138] initcall init_bio+0x0/0xf2 returned 0 after 3906 usecs
[    1.432004] calling  fsnotify_init+0x0/0xf @ 1
[    1.436008] initcall fsnotify_init+0x0/0xf returned 0 after 0 usecs
[    1.440003] calling  fsnotify_notification_init+0x0/0x5b @ 1
[    1.448012] initcall fsnotify_notification_init+0x0/0x5b returned 0 after 0 usecs
[    1.456003] calling  cryptomgr_init+0x0/0xf @ 1
[    1.460003] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
[    1.464003] calling  blk_settings_init+0x0/0x1d @ 1
[    1.468003] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
[    1.476003] calling  blk_ioc_init+0x0/0x24 @ 1
[    1.480014] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs
[    1.488005] calling  blk_softirq_init+0x0/0x73 @ 1
[    1.492004] initcall blk_softirq_init+0x0/0x73 returned 0 after 0 usecs
[    1.500003] calling  blk_iopoll_setup+0x0/0x73 @ 1
[    1.504004] initcall blk_iopoll_setup+0x0/0x73 returned 0 after 0 usecs
[    1.508003] calling  genhd_device_init+0x0/0x50 @ 1
[    1.516002] device class 'block': registering
[    1.520051] initcall genhd_device_init+0x0/0x50 returned 0 after 3906 usecs
[    1.528003] calling  blk_dev_integrity_init+0x0/0x24 @ 1
[    1.532008] initcall blk_dev_integrity_init+0x0/0x24 returned 0 after 0 usecs
[    1.540003] calling  gpiolib_debugfs_init+0x0/0x1f @ 1
[    1.544027] initcall gpiolib_debugfs_init+0x0/0x1f returned 0 after 0 usecs
[    1.552003] calling  max7300_init+0x0/0x11 @ 1
[    1.556003] bus: 'i2c': add driver max7300
[    1.560067] i2c-core: driver [max7300] registered
[    1.564004] initcall max7300_init+0x0/0x11 returned 0 after 7812 usecs
[    1.572003] calling  pca953x_init+0x0/0x11 @ 1
[    1.576002] bus: 'i2c': add driver pca953x
[    1.580052] i2c-core: driver [pca953x] registered
[    1.584004] initcall pca953x_init+0x0/0x11 returned 0 after 7812 usecs
[    1.592003] calling  tc35892_gpio_init+0x0/0xf @ 1
[    1.596002] bus: 'platform': add driver tc35892-gpio
[    1.600054] initcall tc35892_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    1.608003] calling  wm8994_gpio_init+0x0/0xf @ 1
[    1.612002] bus: 'platform': add driver wm8994-gpio
[    1.616054] initcall wm8994_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    1.624005] calling  pci_slot_init+0x0/0x3b @ 1
[    1.628009] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs
[    1.636003] calling  fbmem_init+0x0/0x80 @ 1
[    1.640013] device class 'graphics': registering
[    1.644053] initcall fbmem_init+0x0/0x80 returned 0 after 3906 usecs
[    1.648003] calling  pnp_init+0x0/0xf @ 1
[    1.652060] bus: 'pnp': registered
[    1.656003] initcall pnp_init+0x0/0xf returned 0 after 3906 usecs
[    1.664003] calling  max1586_pmic_init+0x0/0x11 @ 1
[    1.668002] bus: 'i2c': add driver max1586
[    1.672066] i2c-core: driver [max1586] registered
[    1.676004] initcall max1586_pmic_init+0x0/0x11 returned 0 after 7812 usecs
[    1.684003] calling  max8660_init+0x0/0x11 @ 1
[    1.688002] bus: 'i2c': add driver max8660
[    1.692052] i2c-core: driver [max8660] registered
[    1.696004] initcall max8660_init+0x0/0x11 returned 0 after 7812 usecs
[    1.704003] calling  max8925_regulator_init+0x0/0xf @ 1
[    1.708002] bus: 'platform': add driver max8925-regulator
[    1.716054] initcall max8925_regulator_init+0x0/0xf returned 0 after 7812 usecs
[    1.720003] calling  wm831x_dcdc_init+0x0/0x73 @ 1
[    1.728002] bus: 'platform': add driver wm831x-buckv
[    1.732052] bus: 'platform': add driver wm831x-buckp
[    1.736062] bus: 'platform': add driver wm831x-boostp
[    1.740053] bus: 'platform': add driver wm831x-epe
[    1.748055] initcall wm831x_dcdc_init+0x0/0x73 returned 0 after 19531 usecs
[    1.752003] calling  wm831x_isink_init+0x0/0x28 @ 1
[    1.760002] bus: 'platform': add driver wm831x-isink
[    1.764054] initcall wm831x_isink_init+0x0/0x28 returned 0 after 3906 usecs
[    1.772003] calling  wm831x_ldo_init+0x0/0x58 @ 1
[    1.776002] bus: 'platform': add driver wm831x-ldo
[    1.780052] bus: 'platform': add driver wm831x-aldo
[    1.784052] bus: 'platform': add driver wm831x-alive-ldo
[    1.792054] initcall wm831x_ldo_init+0x0/0x58 returned 0 after 15625 usecs
[    1.796003] calling  da903x_regulator_init+0x0/0xf @ 1
[    1.804002] bus: 'platform': add driver da903x-regulator
[    1.808054] initcall da903x_regulator_init+0x0/0xf returned 0 after 3906 usecs
[    1.816007] calling  tps_65023_init+0x0/0x11 @ 1
[    1.820002] bus: 'i2c': add driver tps65023
[    1.824052] i2c-core: driver [tps65023] registered
[    1.828004] initcall tps_65023_init+0x0/0x11 returned 0 after 7812 usecs
[    1.836003] calling  tps6507x_pmic_init+0x0/0xf @ 1
[    1.840002] bus: 'platform': add driver tps6507x-pmic
[    1.844054] initcall tps6507x_pmic_init+0x0/0xf returned 0 after 3906 usecs
[    1.852003] calling  misc_init+0x0/0x9b @ 1
[    1.856007] device class 'misc': registering
[    1.860055] initcall misc_init+0x0/0x9b returned 0 after 3906 usecs
[    1.868003] calling  tifm_init+0x0/0x6f @ 1
[    1.872071] bus: 'tifm': registered
[    1.876003] device class 'tifm_adapter': registering
[    1.880062] initcall tifm_init+0x0/0x6f returned 0 after 7812 usecs
[    1.884003] calling  pm860x_i2c_init+0x0/0x2a @ 1
[    1.888004] bus: 'i2c': add driver 88PM860x
[    1.892054] i2c-core: driver [88PM860x] registered
[    1.896004] initcall pm860x_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[    1.900003] calling  tc35892_init+0x0/0x11 @ 1
[    1.904002] bus: 'i2c': add driver tc35892
[    1.908052] i2c-core: driver [tc35892] registered
[    1.912003] initcall tc35892_init+0x0/0x11 returned 0 after 7812 usecs
[    1.916003] calling  wm831x_i2c_init+0x0/0x2a @ 1
[    1.920002] bus: 'i2c': add driver wm831x
[    1.924052] i2c-core: driver [wm831x] registered
[    1.928004] initcall wm831x_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[    1.932002] calling  tps_init+0x0/0xa1 @ 1
[    1.936002] tps65010: version 2 May 2005
[    1.940002] bus: 'i2c': add driver tps65010
[    1.944051] i2c-core: driver [tps65010] registered
[    1.948007] bus: 'i2c': remove driver tps65010
[    1.952049] driver: 'tps65010': driver_release
[    1.956005] i2c-core: driver [tps65010] unregistered
[    1.976005] bus: 'i2c': add driver tps65010
[    1.980052] i2c-core: driver [tps65010] registered
[    1.984006] bus: 'i2c': remove driver tps65010
[    1.988047] driver: 'tps65010': driver_release
[    1.992005] i2c-core: driver [tps65010] unregistered
[    2.012004] bus: 'i2c': add driver tps65010
[    2.016052] i2c-core: driver [tps65010] registered
[    2.020006] bus: 'i2c': remove driver tps65010
[    2.024047] driver: 'tps65010': driver_release
[    2.028005] i2c-core: driver [tps65010] unregistered
[    2.032001] tps65010: no chip?
[    2.036003] initcall tps_init+0x0/0xa1 returned -19 after 97656 usecs
[    2.040003] calling  tps6507x_i2c_init+0x0/0x11 @ 1
[    2.044002] bus: 'i2c': add driver tps6507x
[    2.048052] i2c-core: driver [tps6507x] registered
[    2.052004] initcall tps6507x_i2c_init+0x0/0x11 returned 0 after 7812 usecs
[    2.056003] calling  da903x_init+0x0/0x11 @ 1
[    2.060002] bus: 'i2c': add driver da903x
[    2.064061] i2c-core: driver [da903x] registered
[    2.068004] initcall da903x_init+0x0/0x11 returned 0 after 7812 usecs
[    2.072003] calling  max8925_i2c_init+0x0/0x2a @ 1
[    2.076002] bus: 'i2c': add driver max8925
[    2.080052] i2c-core: driver [max8925] registered
[    2.084004] initcall max8925_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[    2.088003] calling  init_scsi+0x0/0x79 @ 1
[    2.092388] device class 'scsi_host': registering
[    2.096108] bus: 'scsi': registered
[    2.100002] device class 'scsi_device': registering
[    2.104063] SCSI subsystem initialized
[    2.108004] initcall init_scsi+0x0/0x79 returned 0 after 15625 usecs
[    2.112004] calling  ata_init+0x0/0x293 @ 1
[    2.116043] libata version 3.00 loaded.
[    2.120005] initcall ata_init+0x0/0x293 returned 0 after 3906 usecs
[    2.124003] calling  phy_init+0x0/0x2a @ 1
[    2.128002] device class 'mdio_bus': registering
[    2.136122] bus: 'mdio_bus': registered
[    2.140003] bus: 'mdio_bus': add driver Generic PHY
[    2.144055] initcall phy_init+0x0/0x2a returned 0 after 15625 usecs
[    2.148004] calling  init_pcmcia_cs+0x0/0x2d @ 1
[    2.156002] device class 'pcmcia_socket': registering
[    2.160052] initcall init_pcmcia_cs+0x0/0x2d returned 0 after 3906 usecs
[    2.164003] calling  nop_usb_xceiv_init+0x0/0xf @ 1
[    2.172002] bus: 'platform': add driver nop_usb_xceiv
[    2.176054] initcall nop_usb_xceiv_init+0x0/0xf returned 0 after 3906 usecs
[    2.184003] calling  usb_init+0x0/0x136 @ 1
[    2.188070] bus: 'usb': registered
[    2.192016] bus: 'usb': add driver usbfs
[    2.196056] usbcore: registered new interface driver usbfs
[    2.200005] device class 'usb_device': registering
[    2.204050] bus: 'usb': add driver hub
[    2.208054] usbcore: registered new interface driver hub
[    2.216025] bus: 'usb': add driver usb
[    2.219814] usbcore: registered new device driver usb
[    2.220005] initcall usb_init+0x0/0x136 returned 0 after 31250 usecs
[    2.224004] calling  serio_init+0x0/0x73 @ 1
[    2.228069] bus: 'serio': registered
[    2.232042] initcall serio_init+0x0/0x73 returned 0 after 3906 usecs
[    2.240003] calling  gameport_init+0x0/0x73 @ 1
[    2.244062] bus: 'gameport': registered
[    2.248042] initcall gameport_init+0x0/0x73 returned 0 after 3906 usecs
[    2.252003] calling  input_init+0x0/0x10f @ 1
[    2.256002] device class 'input': registering
[    2.260072] initcall input_init+0x0/0x10f returned 0 after 3906 usecs
[    2.264003] calling  tca6416_keypad_init+0x0/0x11 @ 1
[    2.268003] bus: 'i2c': add driver tca6416-keypad
[    2.272053] i2c-core: driver [tca6416-keypad] registered
[    2.276003] initcall tca6416_keypad_init+0x0/0x11 returned 0 after 7812 usecs
[    2.280003] calling  rtc_init+0x0/0x5e @ 1
[    2.284002] device class 'rtc': registering
[    2.288051] initcall rtc_init+0x0/0x5e returned 0 after 3906 usecs
[    2.292003] calling  i2c_gpio_init+0x0/0x28 @ 1
[    2.296004] bus: 'platform': add driver i2c-gpio
[    2.300056] initcall i2c_gpio_init+0x0/0x28 returned 0 after 3906 usecs
[    2.304003] calling  pps_init+0x0/0x92 @ 1
[    2.308002] device class 'pps': registering
[    2.312049] LinuxPPS API ver. 1 registered
[    2.316004] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti-k2GhghHVRtY@public.gmane.org>
[    2.320003] initcall pps_init+0x0/0x92 returned 0 after 11718 usecs
[    2.324003] calling  power_supply_class_init+0x0/0x39 @ 1
[    2.328002] device class 'power_supply': registering
[    2.332051] initcall power_supply_class_init+0x0/0x39 returned 0 after 3906 usecs
[    2.336003] calling  hwmon_init+0x0/0xf3 @ 1
[    2.340003] device class 'hwmon': registering
[    2.344050] initcall hwmon_init+0x0/0xf3 returned 0 after 3906 usecs
[    2.348003] calling  thermal_init+0x0/0x46 @ 1
[    2.352002] device class 'thermal': registering
[    2.356062] initcall thermal_init+0x0/0x46 returned 0 after 3906 usecs
[    2.360004] calling  raid6_select_algo+0x0/0x16e @ 1
[    2.432065] raid6: int32x1    852 MB/s
[    2.500049] raid6: int32x2   1048 MB/s
[    2.568030] raid6: int32x4    565 MB/s
[    2.636050] raid6: int32x8    417 MB/s
[    2.704003] raid6: mmxx1     1666 MB/s
[    2.772010] raid6: mmxx2     2879 MB/s
[    2.840026] raid6: sse1x1    1495 MB/s
[    2.908019] raid6: sse1x2    2153 MB/s
[    2.976004] raid6: sse2x1    2558 MB/s
[    3.044015] raid6: sse2x2    3026 MB/s
[    3.047762] raid6: using algorithm sse2x2 (3026 MB/s)
[    3.048008] initcall raid6_select_algo+0x0/0x16e returned 0 after 667968 usecs
[    3.052003] calling  md_init+0x0/0xb7 @ 1
[    3.056013] initcall md_init+0x0/0xb7 returned 0 after 0 usecs
[    3.060003] calling  leds_init+0x0/0x3d @ 1
[    3.064002] device class 'leds': registering
[    3.068052] initcall leds_init+0x0/0x3d returned 0 after 3906 usecs
[    3.072003] calling  init_soundcore+0x0/0x83 @ 1
[    3.076006] device class 'sound': registering
[    3.080050] initcall init_soundcore+0x0/0x83 returned 0 after 3906 usecs
[    3.084003] calling  pci_subsys_init+0x0/0x44 @ 1
[    3.088002] PCI: Probing PCI hardware
[    3.092003] PCI: Probing PCI hardware (bus 00)
[    3.096010] device: 'pci0000:00': device_add
[    3.100020] PM: Adding info for No Bus:pci0000:00
[    3.104006] device: '0000:00': device_add
[    3.108017] PM: Adding info for No Bus:0000:00
[    3.112049] pci_bus 0000:00: scanning bus
[    3.116072] pci 0000:00:00.0: found [10de:005e] class 000580 header type 00
[    3.120282] pci 0000:00:01.0: found [10de:0050] class 000601 header type 00
[    3.124177] pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00
[    3.128042] pci 0000:00:01.1: reg 10: [io  0xdc00-0xdc1f]
[    3.132064] pci 0000:00:01.1: reg 20: [io  0x4c00-0x4c3f]
[    3.136018] pci 0000:00:01.1: reg 24: [io  0x4c40-0x4c7f]
[    3.140074] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    3.144012] pci 0000:00:01.1: PME# disabled
[    3.148078] pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00
[    3.152042] pci 0000:00:02.0: reg 10: [mem 0xda102000-0xda102fff]
[    3.156151] pci 0000:00:02.0: supports D1 D2
[    3.160002] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.164011] pci 0000:00:02.0: PME# disabled
[    3.168060] pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00
[    3.172050] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
[    3.176176] pci 0000:00:02.1: supports D1 D2
[    3.180002] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    3.184012] pci 0000:00:02.1: PME# disabled
[    3.188091] pci 0000:00:04.0: found [10de:0059] class 000401 header type 00
[    3.192041] pci 0000:00:04.0: reg 10: [io  0xd400-0xd4ff]
[    3.196018] pci 0000:00:04.0: reg 14: [io  0xd800-0xd8ff]
[    3.200018] pci 0000:00:04.0: reg 18: [mem 0xda101000-0xda101fff]
[    3.204120] pci 0000:00:04.0: supports D1 D2
[    3.208056] pci 0000:00:06.0: found [10de:0053] class 000101 header type 00
[    3.212100] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    3.216140] pci 0000:00:09.0: found [10de:005c] class 000604 header type 01
[    3.220110] pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00
[    3.224041] pci 0000:00:0a.0: reg 10: [mem 0xda100000-0xda100fff]
[    3.228018] pci 0000:00:0a.0: reg 14: [io  0xd000-0xd007]
[    3.232135] pci 0000:00:0a.0: supports D1 D2
[    3.236003] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.240011] pci 0000:00:0a.0: PME# disabled
[    3.244075] pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01
[    3.248190] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.252011] pci 0000:00:0b.0: PME# disabled
[    3.256098] pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01
[    3.260189] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.264011] pci 0000:00:0c.0: PME# disabled
[    3.268098] pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01
[    3.272190] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.276011] pci 0000:00:0d.0: PME# disabled
[    3.280097] pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01
[    3.284190] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.288011] pci 0000:00:0e.0: PME# disabled
[    3.292113] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00
[    3.296202] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00
[    3.300179] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00
[    3.304157] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00
[    3.308182] pci_bus 0000:00: fixups for bus
[    3.312002] PCI: peer root bus 00 res updated from pci conf
[    3.316002] Clocksource tsc unstable (delta = 116003322 ns)
[    3.320024] pci 0000:00:09.0: scanning [bus 05-05] behind bridge, pass 0
[    3.328028] pci_bus 0000:05: scanning bus
[    3.332067] pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00
[    3.336044] pci 0000:05:07.0: reg 10: [io  0xc000-0xc0ff]
[    3.340019] pci 0000:05:07.0: reg 14: [mem 0xda000000-0xda0000ff]
[    3.344142] pci 0000:05:07.0: supports D1 D2
[    3.348002] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
[    3.352012] pci 0000:05:07.0: PME# disabled
[    3.356121] pci_bus 0000:05: fixups for bus
[    3.360002] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
[    3.364010] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
[    3.368010] pci 0000:00:09.0:   bridge window [mem 0xda000000-0xda0fffff]
[    3.372010] pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.376003] pci 0000:00:09.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    3.380003] pci 0000:00:09.0:   bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[    3.384003] pci 0000:00:09.0:   bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
[    3.388003] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    3.392002] pci_bus 0000:05: bus scan returning with max=05
[    3.396012] pci 0000:00:0b.0: scanning [bus 04-04] behind bridge, pass 0
[    3.400188] pci_bus 0000:04: scanning bus
[    3.404007] pci_bus 0000:04: fixups for bus
[    3.408002] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    3.412018] pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)
[    3.416010] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    3.420018] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.424002] pci_bus 0000:04: bus scan returning with max=04
[    3.428012] pci 0000:00:0c.0: scanning [bus 03-03] behind bridge, pass 0
[    3.432175] pci_bus 0000:03: scanning bus
[    3.436006] pci_bus 0000:03: fixups for bus
[    3.440002] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    3.444018] pci 0000:00:0c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    3.448010] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    3.452018] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.456002] pci_bus 0000:03: bus scan returning with max=03
[    3.460012] pci 0000:00:0d.0: scanning [bus 02-02] behind bridge, pass 0
[    3.464174] pci_bus 0000:02: scanning bus
[    3.468006] pci_bus 0000:02: fixups for bus
[    3.472002] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    3.476018] pci 0000:00:0d.0:   bridge window [io  0xf000-0x0000] (disabled)
[    3.480010] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    3.484018] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.488002] pci_bus 0000:02: bus scan returning with max=02
[    3.492013] pci 0000:00:0e.0: scanning [bus 01-01] behind bridge, pass 0
[    3.496174] pci_bus 0000:01: scanning bus
[    3.500045] pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00
[    3.504028] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[    3.508018] pci 0000:01:00.0: reg 14: [io  0xb000-0xb0ff]
[    3.512018] pci 0000:01:00.0: reg 18: [mem 0xd9000000-0xd900ffff]
[    3.516067] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    3.520081] pci 0000:01:00.0: supports D1 D2
[    3.524078] pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00
[    3.528023] pci 0000:01:00.1: reg 10: [mem 0xd9010000-0xd901ffff]
[    3.532170] pci 0000:01:00.1: supports D1 D2
[    3.536052] pci_bus 0000:01: fixups for bus
[    3.540002] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    3.544018] pci 0000:00:0e.0:   bridge window [io  0xb000-0xbfff]
[    3.548010] pci 0000:00:0e.0:   bridge window [mem 0xd8000000-0xd9ffffff]
[    3.552018] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    3.556002] pci_bus 0000:01: bus scan returning with max=01
[    3.560012] pci 0000:00:09.0: scanning [bus 05-05] behind bridge, pass 1
[    3.564021] pci 0000:00:0b.0: scanning [bus 04-04] behind bridge, pass 1
[    3.568021] pci 0000:00:0c.0: scanning [bus 03-03] behind bridge, pass 1
[    3.572021] pci 0000:00:0d.0: scanning [bus 02-02] behind bridge, pass 1
[    3.576021] pci 0000:00:0e.0: scanning [bus 01-01] behind bridge, pass 1
[    3.580016] pci_bus 0000:00: bus scan returning with max=05
[    3.584003] device: '0000:00:00.0': device_add
[    3.588006] bus: 'pci': add device 0000:00:00.0
[    3.592036] PM: Adding info for pci:0000:00:00.0
[    3.596056] device: '0000:00:01.0': device_add
[    3.600005] bus: 'pci': add device 0000:00:01.0
[    3.604042] PM: Adding info for pci:0000:00:01.0
[    3.608053] device: '0000:00:01.1': device_add
[    3.612005] bus: 'pci': add device 0000:00:01.1
[    3.616032] PM: Adding info for pci:0000:00:01.1
[    3.620052] device: '0000:00:02.0': device_add
[    3.624014] bus: 'pci': add device 0000:00:02.0
[    3.628033] PM: Adding info for pci:0000:00:02.0
[    3.632052] device: '0000:00:02.1': device_add
[    3.636005] bus: 'pci': add device 0000:00:02.1
[    3.640042] PM: Adding info for pci:0000:00:02.1
[    3.644060] device: '0000:00:04.0': device_add
[    3.648006] bus: 'pci': add device 0000:00:04.0
[    3.652033] PM: Adding info for pci:0000:00:04.0
[    3.656052] device: '0000:00:06.0': device_add
[    3.660005] bus: 'pci': add device 0000:00:06.0
[    3.664042] PM: Adding info for pci:0000:00:06.0
[    3.668052] device: '0000:00:09.0': device_add
[    3.672006] bus: 'pci': add device 0000:00:09.0
[    3.676033] PM: Adding info for pci:0000:00:09.0
[    3.680051] device: '0000:00:0a.0': device_add
[    3.684006] bus: 'pci': add device 0000:00:0a.0
[    3.688042] PM: Adding info for pci:0000:00:0a.0
[    3.692052] device: '0000:00:0b.0': device_add
[    3.696006] bus: 'pci': add device 0000:00:0b.0
[    3.700033] PM: Adding info for pci:0000:00:0b.0
[    3.704051] device: '0000:00:0c.0': device_add
[    3.708015] bus: 'pci': add device 0000:00:0c.0
[    3.712033] PM: Adding info for pci:0000:00:0c.0
[    3.716052] device: '0000:00:0d.0': device_add
[    3.720006] bus: 'pci': add device 0000:00:0d.0
[    3.724042] PM: Adding info for pci:0000:00:0d.0
[    3.728052] device: '0000:00:0e.0': device_add
[    3.732006] bus: 'pci': add device 0000:00:0e.0
[    3.736033] PM: Adding info for pci:0000:00:0e.0
[    3.740051] device: '0000:00:18.0': device_add
[    3.744006] bus: 'pci': add device 0000:00:18.0
[    3.748043] PM: Adding info for pci:0000:00:18.0
[    3.752052] device: '0000:00:18.1': device_add
[    3.756006] bus: 'pci': add device 0000:00:18.1
[    3.760033] PM: Adding info for pci:0000:00:18.1
[    3.764051] device: '0000:00:18.2': device_add
[    3.768006] bus: 'pci': add device 0000:00:18.2
[    3.772046] PM: Adding info for pci:0000:00:18.2
[    3.776052] device: '0000:00:18.3': device_add
[    3.780006] bus: 'pci': add device 0000:00:18.3
[    3.784033] PM: Adding info for pci:0000:00:18.3
[    3.788052] device: '0000:05:07.0': device_add
[    3.792014] bus: 'pci': add device 0000:05:07.0
[    3.796044] PM: Adding info for pci:0000:05:07.0
[    3.800053] device: '0000:05': device_add
[    3.804018] PM: Adding info for No Bus:0000:05
[    3.808053] device: '0000:04': device_add
[    3.812018] PM: Adding info for No Bus:0000:04
[    3.816052] device: '0000:03': device_add
[    3.820027] PM: Adding info for No Bus:0000:03
[    3.824053] device: '0000:02': device_add
[    3.828017] PM: Adding info for No Bus:0000:02
[    3.832052] device: '0000:01:00.0': device_add
[    3.836006] bus: 'pci': add device 0000:01:00.0
[    3.840035] PM: Adding info for pci:0000:01:00.0
[    3.844052] device: '0000:01:00.1': device_add
[    3.848015] bus: 'pci': add device 0000:01:00.1
[    3.852035] PM: Adding info for pci:0000:01:00.1
[    3.856053] device: '0000:01': device_add
[    3.860018] PM: Adding info for No Bus:0000:01
[    3.864329] pci 0000:00:00.0: default IRQ router [10de:005e]
[    3.868011] pci 0000:00:01.1: ignoring bogus IRQ 255
[    3.872004] pci 0000:00:02.0: ignoring bogus IRQ 255
[    3.876004] pci 0000:00:02.1: ignoring bogus IRQ 255
[    3.880036] PCI: pci_cache_line_size set to 64 bytes
[    3.884025] pci 0000:00:01.1: BAR 0: reserving [io  0xdc00-0xdc1f flags 0x40101] (d=0, p=0)
[    3.888003] pci 0000:00:01.1: BAR 4: reserving [io  0x4c00-0x4c3f flags 0x40101] (d=0, p=0)
[    3.892003] pci 0000:00:01.1: BAR 5: reserving [io  0x4c40-0x4c7f flags 0x40101] (d=0, p=0)
[    3.896009] pci 0000:00:02.0: BAR 0: reserving [mem 0xda102000-0xda102fff flags 0x40200] (d=0, p=0)
[    3.900009] pci 0000:00:02.1: BAR 0: reserving [mem 0xfeb00000-0xfeb000ff flags 0x40200] (d=0, p=0)
[    3.904003] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
[    3.908009] pci 0000:00:04.0: BAR 0: reserving [io  0xd400-0xd4ff flags 0x40101] (d=0, p=0)
[    3.912003] pci 0000:00:04.0: BAR 1: reserving [io  0xd800-0xd8ff flags 0x40101] (d=0, p=0)
[    3.916003] pci 0000:00:04.0: BAR 2: reserving [mem 0xda101000-0xda101fff flags 0x40200] (d=0, p=0)
[    3.920009] pci 0000:00:06.0: BAR 0: reserving [io  0x01f0-0x01f7 flags 0x110] (d=0, p=0)
[    3.924003] pci 0000:00:06.0: BAR 1: reserving [io  0x03f6 flags 0x110] (d=0, p=0)
[    3.928003] pci 0000:00:06.0: BAR 2: reserving [io  0x0170-0x0177 flags 0x110] (d=0, p=0)
[    3.932003] pci 0000:00:06.0: BAR 3: reserving [io  0x0376 flags 0x110] (d=0, p=0)
[    3.936003] pci 0000:00:06.0: BAR 4: reserving [io  0xf000-0xf00f flags 0x40101] (d=0, p=0)
[    3.940015] pci 0000:00:0a.0: BAR 0: reserving [mem 0xda100000-0xda100fff flags 0x40200] (d=0, p=0)
[    3.944003] pci 0000:00:0a.0: BAR 1: reserving [io  0xd000-0xd007 flags 0x40101] (d=0, p=0)
[    3.948058] pci 0000:05:07.0: BAR 0: reserving [io  0xc000-0xc0ff flags 0x40101] (d=0, p=0)
[    3.952003] pci 0000:05:07.0: BAR 1: reserving [mem 0xda000000-0xda0000ff flags 0x40200] (d=0, p=0)
[    3.956009] pci 0000:01:00.0: BAR 0: reserving [mem 0xd0000000-0xd7ffffff flags 0x42208] (d=0, p=0)
[    3.960003] pci 0000:01:00.0: BAR 1: reserving [io  0xb000-0xb0ff flags 0x40101] (d=0, p=0)
[    3.964003] pci 0000:01:00.0: BAR 2: reserving [mem 0xd9000000-0xd900ffff flags 0x40200] (d=0, p=0)
[    3.968135] pci 0000:01:00.1: BAR 0: reserving [mem 0xd9010000-0xd901ffff flags 0x40200] (d=1, p=1)
[    3.972006] Expanded resource reserved due to conflict with PCI Bus #00
[    3.976002] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    3.980004] reserve RAM buffer: 000000003fff0000 - 000000003fffffff initcall pci_subsys_init+0x0/0x44 returned 0 after 875000 usecs
[    3.988003] calling  proto_init+0x0/0xf @ 1
[    3.992018] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[    3.996003] calling  net_dev_init+0x0/0x1cd @ 1
[    4.000019] device class 'net': registering
[    4.008054] device: 'lo': device_add
[    4.011704] PM: Adding info for No Bus:lo
[    4.012143] initcall net_dev_init+0x0/0x1cd returned 0 after 11718 usecs
[    4.016003] calling  neigh_init+0x0/0x66 @ 1
[    4.020003] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs
[    4.024003] calling  fib_rules_init+0x0/0x99 @ 1
[    4.028004] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs
[    4.032003] calling  genl_init+0x0/0x77 @ 1
[    4.036058] initcall genl_init+0x0/0x77 returned 0 after 0 usecs
[    4.040003] calling  cipso_v4_init+0x0/0x6b @ 1
[    4.044024] initcall cipso_v4_init+0x0/0x6b returned 0 after 0 usecs
[    4.048003] calling  wanrouter_init+0x0/0x42 @ 1
[    4.052002] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[    4.056015] initcall wanrouter_init+0x0/0x42 returned 0 after 3906 usecs
[    4.060002] calling  bt_init+0x0/0x4f @ 1
[    4.064002] Bluetooth: Core ver 2.15
[    4.068014] device class 'bluetooth': registering
[    4.072061] NET: Registered protocol family 31
[    4.076002] Bluetooth: HCI device and connection manager initialized
[    4.080003] Bluetooth: HCI socket layer initialized
[    4.084003] initcall bt_init+0x0/0x4f returned 0 after 19531 usecs
[    4.088002] calling  atm_init+0x0/0xbc @ 1
[    4.092002] NET: Registered protocol family 8
[    4.096002] NET: Registered protocol family 20
[    4.100021] device class 'atm': registering
[    4.104051] initcall atm_init+0x0/0xbc returned 0 after 11718 usecs
[    4.108003] calling  wireless_nlevent_init+0x0/0xf @ 1
[    4.112004] initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs
[    4.116003] calling  netlbl_init+0x0/0x6d @ 1
[    4.120001] NetLabel: Initializing
[    4.124002] NetLabel:  domain hash size = 128
[    4.128001] NetLabel:  protocols = UNLABELED CIPSOv4
[    4.132134] NetLabel:  unlabeled traffic allowed by default
[    4.136003] initcall netlbl_init+0x0/0x6d returned 0 after 15625 usecs
[    4.140003] calling  rfkill_init+0x0/0x66 @ 1
[    4.144002] device class 'rfkill': registering
[    4.148054] device: 'rfkill': device_add
[    4.152015] PM: Adding info for No Bus:rfkill
[    4.160023] initcall rfkill_init+0x0/0x66 returned 0 after 15625 usecs
[    4.164003] calling  wpan_phy_class_init+0x0/0x33 @ 1
[    4.168002] device class 'ieee802154': registering
[    4.172166] initcall wpan_phy_class_init+0x0/0x33 returned 0 after 3906 usecs
[    4.176004] calling  print_ICs+0x0/0x46d @ 1
[    4.180002] 
[    4.180002] printing PIC contents
[    4.184003] ... PIC  IMR: fffa
[    4.187057] ... PIC  IRR: 0001
[    4.188001] ... PIC  ISR: 0001
[    4.192003] ... PIC ELCR: 0828
[    4.196003] printing local APIC contents on CPU#0/0:
[    4.200000] ... APIC ID:      00000000 (0)
[    4.200000] ... APIC VERSION: 00040010
[    4.200000] ... APIC TASKPRI: 00000000 (00)
[    4.200000] ... APIC ARBPRI: 000000e0 (e0)
[    4.200000] ... APIC PROCPRI: 00000000
[    4.200000] ... APIC LDR: 01000000
[    4.200000] ... APIC DFR: ffffffff
[    4.200000] ... APIC SPIV: 000001ff
[    4.200000] ... APIC ISR field:
[    4.200000] 0000000000000000000000000000000000000000000000000000000000000000
[    4.200000] ... APIC TMR field:
[    4.200000] 0000000000000000000000000000000000000000000000000000000000000000
[    4.200000] ... APIC IRR field:
[    4.200000] 0000000000000000000000000000000000000000000000000000000000008000
[    4.200000] ... APIC ESR: 00000000
[    4.200000] ... APIC ICR: 000008fd
[    4.200000] ... APIC ICR2: 02000000
[    4.200000] ... APIC LVTT: 000200ef
[    4.200000] ... APIC LVTPC: 00000400
[    4.200000] ... APIC LVT0: 00010700
[    4.200000] ... APIC LVT1: 00000400
[    4.200000] ... APIC LVTERR: 000000fe
[    4.200000] ... APIC TMICT: 0000c454
[    4.200000] ... APIC TMCCT: 0000465c
[    4.200000] ... APIC TDCR: 00000003
[    4.200000] 
[    4.200002] number of MP IRQ sources: 17.
[    4.204002] number of IO-APIC #2 registers: 24.
[    4.208001] testing the IO APIC.......................
[    4.212004] 
[    4.213498] IO APIC #2......
[    4.216001] .... register #00: 00000000
[    4.220001] .......    : physical APIC id: 00
[    4.224001] .......    : Delivery Type: 0
[    4.228001] .......    : LTS          : 0
[    4.232001] .... register #01: 00170011
[    4.236002] .......     : max redirection entries: 0017
[    4.240001] .......     : PRQ implemented: 0
[    4.244001] .......     : IO APIC version: 0011
[    4.248001] .... register #02: 00000000
[    4.252001] .......     : arbitration: 00
[    4.256001] .... IRQ redirection table:
[    4.260002]  NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
[    4.264004]  00 003 0    0    0   0   0    1    1    30
[    4.268003]  01 003 0    0    0   0   0    1    1    31
[    4.272003]  02 000 1    0    0   0   0    0    0    00
[    4.280003]  03 003 1    1    0   1   0    1    1    29
[    4.284003]  04 003 0    0    0   0   0    1    1    34
[    4.288003]  05 003 1    1    0   1   0    1    1    41
[    4.295230]  06 003 0    0    0   0   0    1    1    36
[    4.300003]  07 003 1    0    0   0   0    1    1    37
[    4.304003]  08 003 0    0    0   0   0    1    1    38
[    4.311232]  09 003 0    0    0   0   0    1    1    39
[    4.316006]  0a 003 0    0    0   0   0    1    1    3A
[    4.320003]  0b 003 1    1    0   1   0    1    1    49
[    4.327232]  0c 003 0    0    0   0   0    1    1    3C
[    4.332003]  0d 003 0    0    0   0   0    1    1    3D
[    4.336003]  0e 003 0    0    0   0   0    1    1    3E
[    4.340003]  0f 003 0    0    0   0   0    1    1    3F
[    4.348003]  10 000 1    0    0   0   0    0    0    00
[    4.352003]  11 000 1    0    0   0   0    0    0    00
[    4.356003]  12 000 1    0    0   0   0    0    0    00
[    4.364003]  13 000 1    0    0   0   0    0    0    00
[    4.368003]  14 000 1    0    0   0   0    0    0    00
[    4.372003]  15 000 1    0    0   0   0    0    0    00
[    4.379232]  16 000 1    0    0   0   0    0    0    00
[    4.384003]  17 000 1    0    0   0   0    0    0    00
[    4.388001] IRQ to pin mappings:
[    4.392002] IRQ0 -> 0:0
[    4.396001] IRQ1 -> 0:1
[    4.398476] IRQ4 -> 0:4
[    4.400736] IRQ6 -> 0:6
[    4.403213] IRQ7 -> 0:7
[    4.404728] IRQ8 -> 0:8
[    4.408190] IRQ9 -> 0:9
[    4.410667] IRQ10 -> 0:10
[    4.412815] IRQ12 -> 0:12
[    4.416197] IRQ13 -> 0:13
[    4.418847] IRQ14 -> 0:14
[    4.420815] IRQ15 -> 0:15
[    4.424200] IRQ29 -> 0:3
[    4.426770] IRQ31 -> 0:5
[    4.428728] IRQ37 -> 0:11
[    4.432098] .................................... done.
[    4.436003] initcall print_ICs+0x0/0x46d returned 0 after 250000 usecs
[    4.440003] calling  hpet_late_init+0x0/0xef @ 1
[    4.444003] initcall hpet_late_init+0x0/0xef returned -19 after 0 usecs
[    4.448003] calling  init_k8_nbs+0x0/0x21 @ 1
[    4.452097] initcall init_k8_nbs+0x0/0x21 returned 0 after 0 usecs
[    4.456004] calling  clocksource_done_booting+0x0/0x4f @ 1
[    4.460006] initcall clocksource_done_booting+0x0/0x4f returned 0 after 0 usecs
[    4.464003] calling  rb_init_debugfs+0x0/0x27 @ 1
[    4.468016] initcall rb_init_debugfs+0x0/0x27 returned 0 after 0 usecs
[    4.472003] calling  tracer_init_debugfs+0x0/0x306 @ 1
[    4.476309] initcall tracer_init_debugfs+0x0/0x306 returned 0 after 0 usecs
[    4.480003] calling  init_trace_printk_function_export+0x0/0x2a @ 1
[    4.484008] initcall init_trace_printk_function_export+0x0/0x2a returned 0 after 0 usecs
[    4.488003] calling  stat_workqueue_init+0x0/0x27 @ 1
[    4.492022] initcall stat_workqueue_init+0x0/0x27 returned 0 after 0 usecs
[    4.496003] calling  event_trace_init+0x0/0x17a @ 1
[    4.549868] initcall event_trace_init+0x0/0x17a returned 0 after 46875 usecs
[    4.552005] calling  init_pipe_fs+0x0/0x3d @ 1
[    4.556035] initcall init_pipe_fs+0x0/0x3d returned 0 after 0 usecs
[    4.560003] calling  anon_inode_init+0x0/0xf2 @ 1
[    4.564024] initcall anon_inode_init+0x0/0xf2 returned 0 after 0 usecs
[    4.568003] calling  fscache_init+0x0/0x96 @ 1
[    4.572002] Slow work thread pool: Starting up
[    4.580025] Slow work thread pool: Ready
[    4.583926] FS-Cache: Loaded
[    4.584004] initcall fscache_init+0x0/0x96 returned 0 after 11718 usecs
[    4.592004] calling  cachefiles_init+0x0/0x8e @ 1
[    4.596015] device: 'cachefiles': device_add
[    4.600025] PM: Adding info for No Bus:cachefiles
[    4.604063] CacheFiles: Loaded
[    4.608004] initcall cachefiles_init+0x0/0x8e returned 0 after 11718 usecs
[    4.616003] calling  tomoyo_initerface_init+0x0/0x112 @ 1
[    4.620077] initcall tomoyo_initerface_init+0x0/0x112 returned 0 after 0 usecs
[    4.628003] calling  blk_scsi_ioctl_init+0x0/0x288 @ 1
[    4.632003] initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 0 usecs
[    4.640004] calling  pnp_system_init+0x0/0xf @ 1
[    4.644002] bus: 'pnp': add driver system
[    4.648055] initcall pnp_system_init+0x0/0xf returned 0 after 3906 usecs
[    4.656003] calling  chr_dev_init+0x0/0xaf @ 1
[    4.660011] device class 'mem': registering
[    4.664054] device: 'mem': device_add
[    4.668014] PM: Adding info for No Bus:mem
[    4.672049] device: 'kmem': device_add
[    4.676013] PM: Adding info for No Bus:kmem
[    4.680048] device: 'null': device_add
[    4.684013] PM: Adding info for No Bus:null
[    4.688062] device: 'port': device_add
[    4.692014] PM: Adding info for No Bus:port
[    4.696058] device: 'zero': device_add
[    4.700023] PM: Adding info for No Bus:zero
[    4.704053] device: 'full': device_add
[    4.708013] PM: Adding info for No Bus:full
[    4.712050] device: 'random': device_add
[    4.716013] PM: Adding info for No Bus:random
[    4.720049] device: 'urandom': device_add
[    4.724013] PM: Adding info for No Bus:urandom
[    4.728049] device: 'kmsg': device_add
[    4.732014] PM: Adding info for No Bus:kmsg
[    4.736050] device: 'oldmem': device_add
[    4.740024] PM: Adding info for No Bus:oldmem
[    4.744049] initcall chr_dev_init+0x0/0xaf returned 0 after 82031 usecs
[    4.752003] calling  firmware_class_init+0x0/0x14 @ 1
[    4.756002] device class 'firmware': registering
[    4.760071] initcall firmware_class_init+0x0/0x14 returned 0 after 3906 usecs
[    4.768005] calling  cpufreq_gov_performance_init+0x0/0xf @ 1
[    4.776005] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 usecs
[    4.780003] calling  cpufreq_gov_dbs_init+0x0/0x9f @ 1
[    4.788042] initcall cpufreq_gov_dbs_init+0x0/0x9f returned 0 after 0 usecs
[    4.796004] calling  ssb_modinit+0x0/0x4d @ 1
[    4.800082] bus: 'ssb': registered
[    4.803483] initcall ssb_modinit+0x0/0x4d returned 0 after 0 usecs
[    4.808003] calling  pcibios_assign_resources+0x0/0x66 @ 1
[    4.812176] pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x400000ff]
[    4.820012] pci 0000:00:02.1: BAR 0: set to [mem 0x40000000-0x400000ff] (PCI address [0x40000000-0x400000ff]
[    4.832006] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[    4.836006] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
[    4.840014] pci 0000:00:09.0:   bridge window [mem 0xda000000-0xda0fffff]
[    4.848009] pci 0000:00:09.0:   bridge window [mem pref disabled]
[    4.856019] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    4.860002] pci 0000:00:0b.0:   bridge window [io  disabled]
[    4.864013] pci 0000:00:0b.0:   bridge window [mem disabled]
[    4.872009] pci 0000:00:0b.0:   bridge window [mem pref disabled]
[    4.876019] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    4.884002] pci 0000:00:0c.0:   bridge window [io  disabled]
[    4.888013] pci 0000:00:0c.0:   bridge window [mem disabled]
[    4.892009] pci 0000:00:0c.0:   bridge window [mem pref disabled]
[    4.900019] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    4.904002] pci 0000:00:0d.0:   bridge window [io  disabled]
[    4.912013] pci 0000:00:0d.0:   bridge window [mem disabled]
[    4.916009] pci 0000:00:0d.0:   bridge window [mem pref disabled]
[    4.924021] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
[    4.928005] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    4.936006] pci 0000:00:0e.0:   bridge window [io  0xb000-0xbfff]
[    4.940013] pci 0000:00:0e.0:   bridge window [mem 0xd8000000-0xd9ffffff]
[    4.948010] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    4.956037] pci 0000:00:09.0: setting latency timer to 64
[    4.960036] pci 0000:00:0b.0: setting latency timer to 64
[    4.968036] pci 0000:00:0c.0: setting latency timer to 64
[    4.972036] pci 0000:00:0d.0: setting latency timer to 64
[    4.976036] pci 0000:00:0e.0: setting latency timer to 64
[    4.984008] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    4.988002] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
[    4.996002] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
[    5.000002] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    5.008003] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    5.012002] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
[    5.020002] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
[    5.024003] pci_bus 0000:05: resource 5 [mem 0x40000000-0xffffffff]
[    5.032002] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
[    5.036002] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[    5.044003] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    5.048002] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
[    5.056003] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[    5.064004] initcall pcibios_assign_resources+0x0/0x66 returned 0 after 246093 usecs
[    5.072004] calling  inet_init+0x0/0x202 @ 1
[    5.076106] NET: Registered protocol family 2
[    5.080051] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    5.088311] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    5.096728] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[    5.104307] TCP: Hash tables configured (established 131072 bind 65536)
[    5.108002] TCP reno registered
[    5.112012] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    5.120023] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    5.124135] initcall inet_init+0x0/0x202 returned 0 after 46875 usecs
[    5.132004] calling  af_unix_init+0x0/0x47 @ 1
[    5.136013] NET: Registered protocol family 1
[    5.140007] initcall af_unix_init+0x0/0x47 returned 0 after 3906 usecs
[    5.148004] calling  populate_rootfs+0x0/0x1c6 @ 1
[    5.152649] initcall populate_rootfs+0x0/0x1c6 returned 0 after 0 usecs
[    5.160005] calling  pci_iommu_init+0x0/0x21 @ 1
[    5.200581] DMA-API: preallocated 32768 debug entries
[    5.204002] DMA-API: debugging enabled by kernel config
[    5.208009] initcall pci_iommu_init+0x0/0x21 returned 0 after 42968 usecs
[    5.216004] calling  i8259A_init_sysfs+0x0/0x1d @ 1
[    5.220002] Registering sysdev class 'i8259'
[    5.224071] Registering sys device of class 'i8259'
[    5.228007] Registering sys device 'i82590'
[    5.236046] initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 15625 usecs
[    5.240003] calling  sbf_init+0x0/0xd8 @ 1
[    5.244003] initcall sbf_init+0x0/0xd8 returned 0 after 0 usecs
[    5.252003] calling  i8237A_init_sysfs+0x0/0x1d @ 1
[    5.256002] Registering sysdev class 'i8237'
[    5.260048] Registering sys device of class 'i8237'
[    5.264007] Registering sys device 'i82370'
[    5.268045] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 11718 usecs
[    5.276004] calling  add_rtc_cmos+0x0/0x87 @ 1
[    5.280010] Registering platform device 'rtc_cmos'. Parent at platform
[    5.288003] device: 'rtc_cmos': device_add
[    5.292011] bus: 'platform': add device rtc_cmos
[    5.296017] PM: Adding info for platform:rtc_cmos
[    5.300055] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    5.308004] initcall add_rtc_cmos+0x0/0x87 returned 0 after 27343 usecs
[    5.316005] calling  cache_sysfs_init+0x0/0x6f @ 1
[    5.320466] initcall cache_sysfs_init+0x0/0x6f returned 0 after 0 usecs
[    5.328004] calling  mcheck_init_device+0x0/0xf5 @ 1
[    5.332004] Registering sysdev class 'machinecheck'
[    5.336048] Registering sys device of class 'machinecheck'
[    5.344005] Registering sys device 'machinecheck0'
[    5.348070] Registering sys device of class 'machinecheck'
[    5.352005] Registering sys device 'machinecheck1'
[    5.356067] device: 'mcelog': device_add
[    5.360017] PM: Adding info for No Bus:mcelog
[    5.364050] initcall mcheck_init_device+0x0/0xf5 returned 0 after 35156 usecs
[    5.372006] calling  inject_init+0x0/0x25 @ 1
[    5.376002] Machine check injector initialized
[    5.380039] initcall inject_init+0x0/0x25 returned 0 after 3906 usecs
[    5.388004] calling  powernow_k6_init+0x0/0x85 @ 1
[    5.392004] initcall powernow_k6_init+0x0/0x85 returned -19 after 0 usecs
[    5.400003] calling  longrun_init+0x0/0x2d @ 1
[    5.404003] initcall longrun_init+0x0/0x2d returned -19 after 0 usecs
[    5.412003] calling  cpufreq_gx_init+0x0/0x18d @ 1
[    5.416004] initcall cpufreq_gx_init+0x0/0x18d returned -19 after 0 usecs
[    5.424003] calling  nforce2_init+0x0/0x5e @ 1
[    5.428010] cpufreq-nforce2: No nForce2 chipset.
[    5.432003] initcall nforce2_init+0x0/0x5e returned -19 after 3906 usecs
[    5.440003] calling  msr_init+0x0/0x15a @ 1
[    5.444008] device class 'msr': registering
[    5.448068] device: 'msr0': device_add
[    5.452014] PM: Adding info for No Bus:msr0
[    5.456054] device: 'msr1': device_add
[    5.460014] PM: Adding info for No Bus:msr1
[    5.464052] initcall msr_init+0x0/0x15a returned 0 after 19531 usecs
[    5.468004] calling  ioapic_init_sysfs+0x0/0x84 @ 1
[    5.472002] Registering sysdev class 'ioapic'
[    5.480058] Registering sys device of class 'ioapic'
[    5.484005] Registering sys device 'ioapic0'
[    5.488046] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 15625 usecs
[    5.496003] calling  add_pcspkr+0x0/0x24 @ 1
[    5.500006] Registering platform device 'pcspkr'. Parent at platform
[    5.504003] device: 'pcspkr': device_add
[    5.508005] bus: 'platform': add device pcspkr
[    5.512012] PM: Adding info for platform:pcspkr
[    5.520049] initcall add_pcspkr+0x0/0x24 returned 0 after 19531 usecs
[    5.524003] calling  scx200_init+0x0/0x20 @ 1
[    5.528001] scx200: NatSemi SCx200 Driver
[    5.532003] bus: 'pci': add driver scx200
[    5.536063] initcall scx200_init+0x0/0x20 returned 0 after 7812 usecs
[    5.544003] calling  microcode_init+0x0/0xf7 @ 1
[    5.548006] Registering platform device 'microcode'. Parent at platform
[    5.556003] device: 'microcode': device_add
[    5.560005] bus: 'platform': add device microcode
[    5.564012] PM: Adding info for platform:microcode
[    5.568002] microcode: microcode: CPU0: AMD CPU family 0xf not supported
[    5.571997] microcode: microcode: CPU1: AMD CPU family 0xf not supported
[    5.576014] device: 'microcode': device_add
[    5.584015] PM: Adding info for No Bus:microcode
[    5.588050] microcode: Microcode Update Driver: v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
[    5.596004] initcall microcode_init+0x0/0xf7 returned 0 after 46875 usecs
[    5.604004] calling  start_pageattr_test+0x0/0x27 @ 1
[    5.608042] initcall start_pageattr_test+0x0/0x27 returned 0 after 0 usecs
[    5.612004] calling  pt_dump_init+0x0/0x64 @ 1
[    5.616011] initcall pt_dump_init+0x0/0x64 returned 0 after 0 usecs
[    5.620004] calling  init_sched_debug_procfs+0x0/0x27 @ 1
[    5.624012] initcall init_sched_debug_procfs+0x0/0x27 returned 0 after 0 usecs
[    5.628003] calling  proc_schedstat_init+0x0/0x1c @ 1
[    5.632007] initcall proc_schedstat_init+0x0/0x1c returned 0 after 0 usecs
[    5.636003] calling  proc_execdomains_init+0x0/0x1c @ 1
[    5.640007] initcall proc_execdomains_init+0x0/0x1c returned 0 after 0 usecs
[    5.644003] calling  ioresources_init+0x0/0x31 @ 1
[    5.648011] initcall ioresources_init+0x0/0x31 returned 0 after 0 usecs
[    5.652003] calling  uid_cache_init+0x0/0x78 @ 1
[    5.656019] initcall uid_cache_init+0x0/0x78 returned 0 after 0 usecs
[    5.660003] calling  init_posix_timers+0x0/0x14b @ 1
[    5.664011] initcall init_posix_timers+0x0/0x14b returned 0 after 0 usecs
[    5.668003] calling  init_posix_cpu_timers+0x0/0xa2 @ 1
[    5.672003] initcall init_posix_cpu_timers+0x0/0xa2 returned 0 after 0 usecs
[    5.676003] calling  nsproxy_cache_init+0x0/0x27 @ 1
[    5.680009] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 0 usecs
[    5.684005] calling  create_proc_profile+0x0/0x201 @ 1
[    5.688003] initcall create_proc_profile+0x0/0x201 returned 0 after 0 usecs
[    5.692003] calling  timekeeping_init_device+0x0/0x1d @ 1
[    5.696002] Registering sysdev class 'timekeeping'
[    5.700063] Registering sys device of class 'timekeeping'
[    5.704005] Registering sys device 'timekeeping0'
[    5.708049] initcall timekeeping_init_device+0x0/0x1d returned 0 after 11718 usecs
[    5.712003] calling  init_clocksource_sysfs+0x0/0x43 @ 1
[    5.716002] Registering sysdev class 'clocksource'
[    5.720048] Registering sys device of class 'clocksource'
[    5.724005] Registering sys device 'clocksource0'
[    5.728050] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 11718 usecs
[    5.732004] calling  init_timer_list_procfs+0x0/0x27 @ 1
[    5.736008] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 0 usecs
[    5.740003] calling  futex_init+0x0/0x93 @ 1
[    5.744012] initcall futex_init+0x0/0x93 returned 0 after 0 usecs
[    5.748005] calling  init_rttest+0x0/0x107 @ 1
[    5.752002] Registering sysdev class 'rttest'
[    5.756062] Registering sys device of class 'rttest'
[    5.760006] Registering sys device 'rttest0'
[    5.764053] Registering sys device of class 'rttest'
[    5.768007] Registering sys device 'rttest1'
[    5.772053] Registering sys device of class 'rttest'
[    5.776017] Registering sys device 'rttest2'
[    5.780053] Registering sys device of class 'rttest'
[    5.784007] Registering sys device 'rttest3'
[    5.788052] Registering sys device of class 'rttest'
[    5.796008] Registering sys device 'rttest4'
[    5.800052] Registering sys device of class 'rttest'
[    5.804007] Registering sys device 'rttest5'
[    5.808067] Registering sys device of class 'rttest'
[    5.812007] Registering sys device 'rttest6'
[    5.816071] Registering sys device of class 'rttest'
[    5.820007] Registering sys device 'rttest7'
[    5.824050] Initializing RT-Tester: OK
[    5.828004] initcall init_rttest+0x0/0x107 returned 0 after 74218 usecs
[    5.832003] calling  proc_dma_init+0x0/0x1c @ 1
[    5.836008] initcall proc_dma_init+0x0/0x1c returned 0 after 0 usecs
[    5.840003] calling  kallsyms_init+0x0/0x1f @ 1
[    5.844007] initcall kallsyms_init+0x0/0x1f returned 0 after 0 usecs
[    5.848003] calling  snapshot_device_init+0x0/0xf @ 1
[    5.852008] device: 'snapshot': device_add
[    5.856020] PM: Adding info for No Bus:snapshot
[    5.860052] initcall snapshot_device_init+0x0/0xf returned 0 after 7812 usecs
[    5.864004] calling  crash_save_vmcoreinfo_init+0x0/0x37b @ 1
[    5.868028] initcall crash_save_vmcoreinfo_init+0x0/0x37b returned 0 after 0 usecs
[    5.872003] calling  crash_notes_memory_init+0x0/0x31 @ 1
[    5.876006] initcall crash_notes_memory_init+0x0/0x31 returned 0 after 0 usecs
[    5.880003] calling  hung_task_init+0x0/0x42 @ 1
[    5.884025] initcall hung_task_init+0x0/0x42 returned 0 after 0 usecs
[    5.888004] calling  rcuclassic_trace_init+0x0/0xdb @ 1
[    5.892041] initcall rcuclassic_trace_init+0x0/0xdb returned 0 after 0 usecs
[    5.900003] calling  init_lstats_procfs+0x0/0x1f @ 1
[    5.904014] initcall init_lstats_procfs+0x0/0x1f returned 0 after 0 usecs
[    5.912003] calling  init_events+0x0/0x48 @ 1
[    5.916010] initcall init_events+0x0/0x48 returned 0 after 0 usecs
[    5.924003] calling  init_sched_switch_trace+0x0/0xf @ 1
[    5.936006] Testing tracer sched_switch: PASSED
[    6.072716] initcall init_sched_switch_trace+0x0/0xf returned 0 after 140625 usecs
[    6.080003] calling  init_stack_trace+0x0/0xf @ 1
[    6.092003] Testing tracer sysprof: .. no entries found ..FAILED!
[    6.206858] initcall init_stack_trace+0x0/0xf returned -1 after 117187 usecs
[    6.212003] initcall init_stack_trace+0x0/0xf returned with error code -1 
[    6.220003] calling  init_irqsoff_tracer+0x0/0x11 @ 1
[    6.236005] Testing tracer irqsoff: PASSED
[    6.260721] initcall init_irqsoff_tracer+0x0/0x11 returned 0 after 35156 usecs
[    6.268003] calling  init_wakeup_tracer+0x0/0x1d @ 1
[    6.280003] Testing tracer wakeup: 
[    6.616014] ftrace-test used greatest stack depth: 3388 bytes left
[    6.628004] PASSED
[    6.640004] Testing tracer wakeup_rt: PASSED
[    6.984717] initcall init_wakeup_tracer+0x0/0x1d returned 0 after 695312 usecs
[    6.992003] calling  init_ksym_trace+0x0/0x2c @ 1
[    7.008004] Testing tracer ksym_tracer: PASSED
[    7.060719] initcall init_ksym_trace+0x0/0x2c returned 0 after 62500 usecs
[    7.064003] calling  perf_event_sysfs_init+0x0/0x14 @ 1
[    7.072010] initcall perf_event_sysfs_init+0x0/0x14 returned 0 after 0 usecs
[    7.076003] calling  init_per_zone_wmark_min+0x0/0x59 @ 1
[    7.084047] initcall init_per_zone_wmark_min+0x0/0x59 returned 0 after 0 usecs
[    7.092003] calling  kswapd_init+0x0/0x1d @ 1
[    7.096048] initcall kswapd_init+0x0/0x1d returned 0 after 0 usecs
[    7.100003] calling  setup_vmstat+0x0/0xc2 @ 1
[    7.104027] initcall setup_vmstat+0x0/0xc2 returned 0 after 0 usecs
[    7.108003] calling  mm_sysfs_init+0x0/0x22 @ 1
[    7.112009] initcall mm_sysfs_init+0x0/0x22 returned 0 after 0 usecs
[    7.116003] calling  proc_vmalloc_init+0x0/0x1f @ 1
[    7.120007] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 0 usecs
[    7.124003] calling  init_emergency_pool+0x0/0x6b @ 1
[    7.128005] initcall init_emergency_pool+0x0/0x6b returned 0 after 0 usecs
[    7.132003] calling  procswaps_init+0x0/0x1c @ 1
[    7.136016] initcall procswaps_init+0x0/0x1c returned 0 after 0 usecs
[    7.140003] calling  hugetlb_init+0x0/0x32e @ 1
[    7.144003] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    7.148027] initcall hugetlb_init+0x0/0x32e returned 0 after 3906 usecs
[    7.152003] calling  ksm_init+0x0/0x1a5 @ 1
[    7.156049] initcall ksm_init+0x0/0x1a5 returned 0 after 0 usecs
[    7.160004] calling  slab_proc_init+0x0/0x1f @ 1
[    7.164010] initcall slab_proc_init+0x0/0x1f returned 0 after 0 usecs
[    7.172003] calling  slab_sysfs_init+0x0/0xb7 @ 1
[    7.191052] initcall slab_sysfs_init+0x0/0xb7 returned 0 after 11718 usecs
[    7.196009] calling  fasync_init+0x0/0x24 @ 1
[    7.200143] initcall fasync_init+0x0/0x24 returned 0 after 0 usecs
[    7.208003] calling  proc_filesystems_init+0x0/0x1c @ 1
[    7.212012] initcall proc_filesystems_init+0x0/0x1c returned 0 after 0 usecs
[    7.220003] calling  inotify_user_setup+0x0/0x65 @ 1
[    7.224281] initcall inotify_user_setup+0x0/0x65 returned 0 after 0 usecs
[    7.232003] calling  proc_locks_init+0x0/0x1c @ 1
[    7.236009] initcall proc_locks_init+0x0/0x1c returned 0 after 0 usecs
[    7.244006] calling  init_mbcache+0x0/0x11 @ 1
[    7.248003] initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs
[    7.252003] calling  quota_init+0x0/0x20 @ 1
[    7.256046] initcall quota_init+0x0/0x20 returned 0 after 0 usecs
[    7.264003] calling  proc_cmdline_init+0x0/0x1c @ 1
[    7.268008] initcall proc_cmdline_init+0x0/0x1c returned 0 after 0 usecs
[    7.276003] calling  proc_cpuinfo_init+0x0/0x1c @ 1
[    7.280008] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 0 usecs
[    7.288003] calling  proc_devices_init+0x0/0x1c @ 1
[    7.292008] initcall proc_devices_init+0x0/0x1c returned 0 after 0 usecs
[    7.300003] calling  proc_interrupts_init+0x0/0x1c @ 1
[    7.304008] initcall proc_interrupts_init+0x0/0x1c returned 0 after 0 usecs
[    7.312003] calling  proc_loadavg_init+0x0/0x1c @ 1
[    7.316008] initcall proc_loadavg_init+0x0/0x1c returned 0 after 0 usecs
[    7.320003] calling  proc_meminfo_init+0x0/0x1c @ 1
[    7.328008] initcall proc_meminfo_init+0x0/0x1c returned 0 after 0 usecs
[    7.332003] calling  proc_stat_init+0x0/0x1c @ 1
[    7.336008] initcall proc_stat_init+0x0/0x1c returned 0 after 0 usecs
[    7.344003] calling  proc_uptime_init+0x0/0x1c @ 1
[    7.348008] initcall proc_uptime_init+0x0/0x1c returned 0 after 0 usecs
[    7.356003] calling  proc_version_init+0x0/0x1c @ 1
[    7.360008] initcall proc_version_init+0x0/0x1c returned 0 after 0 usecs
[    7.368003] calling  proc_softirqs_init+0x0/0x1c @ 1
[    7.372008] initcall proc_softirqs_init+0x0/0x1c returned 0 after 0 usecs
[    7.380003] calling  proc_kcore_init+0x0/0x78 @ 1
[    7.384011] initcall proc_kcore_init+0x0/0x78 returned 0 after 0 usecs
[    7.392004] calling  vmcore_init+0x0/0x341 @ 1
[    7.396004] initcall vmcore_init+0x0/0x341 returned 0 after 0 usecs
[    7.400003] calling  proc_kmsg_init+0x0/0x1f @ 1
[    7.404008] initcall proc_kmsg_init+0x0/0x1f returned 0 after 0 usecs
[    7.412003] calling  proc_page_init+0x0/0x37 @ 1
[    7.416013] initcall proc_page_init+0x0/0x37 returned 0 after 0 usecs
[    7.424003] calling  configfs_init+0x0/0xbb @ 1
[    7.428155] initcall configfs_init+0x0/0xbb returned 0 after 0 usecs
[    7.436003] calling  init_devpts_fs+0x0/0x3d @ 1
[    7.440039] initcall init_devpts_fs+0x0/0x3d returned 0 after 0 usecs
[    7.444003] calling  init_dlm+0x0/0x8f @ 1
[    7.448209] device: 'dlm-control': device_add
[    7.456023] PM: Adding info for No Bus:dlm-control
[    7.460055] device: 'dlm-monitor': device_add
[    7.464015] PM: Adding info for No Bus:dlm-monitor
[    7.468089] device: 'dlm_plock': device_add
[    7.472014] PM: Adding info for No Bus:dlm_plock
[    7.476047] DLM (built Jun 11 2010 12:25:50) installed
[    7.484004] initcall init_dlm+0x0/0x8f returned 0 after 35156 usecs
[    7.488003] calling  init_ext3_fs+0x0/0x64 @ 1
[    7.492328] initcall init_ext3_fs+0x0/0x64 returned 0 after 0 usecs
[    7.500005] calling  init_ext2_fs+0x0/0x64 @ 1
[    7.504275] initcall init_ext2_fs+0x0/0x64 returned 0 after 0 usecs
[    7.512004] calling  init_ext4_fs+0x0/0xca @ 1
[    7.516860] initcall init_ext4_fs+0x0/0xca returned 0 after 0 usecs
[    7.524004] calling  journal_init+0x0/0xab @ 1
[    7.528565] initcall journal_init+0x0/0xab returned 0 after 0 usecs
[    7.532004] calling  journal_init+0x0/0xbe @ 1
[    7.540208] initcall journal_init+0x0/0xbe returned 0 after 3906 usecs
[    7.544004] calling  init_cramfs_fs+0x0/0x2a @ 1
[    7.548037] initcall init_cramfs_fs+0x0/0x2a returned 0 after 0 usecs
[    7.556003] calling  init_squashfs_fs+0x0/0x5d @ 1
[    7.560147] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    7.568004] initcall init_squashfs_fs+0x0/0x5d returned 0 after 7812 usecs
[    7.572003] calling  init_ramfs_fs+0x0/0xf @ 1
[    7.580004] initcall init_ramfs_fs+0x0/0xf returned 0 after 0 usecs
[    7.584003] calling  init_hugetlbfs_fs+0x0/0x82 @ 1
[    7.588189] initcall init_hugetlbfs_fs+0x0/0x82 returned 0 after 0 usecs
[    7.596004] calling  init_minix_fs+0x0/0x54 @ 1
[    7.600141] initcall init_minix_fs+0x0/0x54 returned 0 after 0 usecs
[    7.608003] calling  init_fat_fs+0x0/0x46 @ 1
[    7.612301] initcall init_fat_fs+0x0/0x46 returned 0 after 0 usecs
[    7.616004] calling  init_vfat_fs+0x0/0xf @ 1
[    7.624005] initcall init_vfat_fs+0x0/0xf returned 0 after 0 usecs
[    7.628003] calling  init_msdos_fs+0x0/0xf @ 1
[    7.632004] initcall init_msdos_fs+0x0/0xf returned 0 after 0 usecs
[    7.640003] calling  init_bfs_fs+0x0/0x54 @ 1
[    7.644136] initcall init_bfs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.648004] calling  init_iso9660_fs+0x0/0x64 @ 1
[    7.656200] initcall init_iso9660_fs+0x0/0x64 returned 0 after 0 usecs
[    7.660004] calling  init_hfs_fs+0x0/0x50 @ 1
[    7.664146] initcall init_hfs_fs+0x0/0x50 returned 0 after 0 usecs
[    7.672004] calling  ecryptfs_init+0x0/0x194 @ 1
[    7.680242] device: 'ecryptfs': device_add
[    7.684019] PM: Adding info for No Bus:ecryptfs
[    7.688055] initcall ecryptfs_init+0x0/0x194 returned 0 after 11718 usecs
[    7.692003] calling  vxfs_init+0x0/0x4d @ 1
[    7.696175] initcall vxfs_init+0x0/0x4d returned 0 after 0 usecs
[    7.700004] calling  init_nls_cp437+0x0/0xf @ 1
[    7.704004] initcall init_nls_cp437+0x0/0xf returned 0 after 0 usecs
[    7.708003] calling  init_nls_cp737+0x0/0xf @ 1
[    7.712003] initcall init_nls_cp737+0x0/0xf returned 0 after 0 usecs
[    7.716003] calling  init_nls_cp850+0x0/0xf @ 1
[    7.720003] initcall init_nls_cp850+0x0/0xf returned 0 after 0 usecs
[    7.724003] calling  init_nls_cp852+0x0/0xf @ 1
[    7.728003] initcall init_nls_cp852+0x0/0xf returned 0 after 0 usecs
[    7.732003] calling  init_nls_cp857+0x0/0xf @ 1
[    7.736003] initcall init_nls_cp857+0x0/0xf returned 0 after 0 usecs
[    7.740003] calling  init_nls_cp861+0x0/0xf @ 1
[    7.744003] initcall init_nls_cp861+0x0/0xf returned 0 after 0 usecs
[    7.748003] calling  init_nls_cp863+0x0/0xf @ 1
[    7.752003] initcall init_nls_cp863+0x0/0xf returned 0 after 0 usecs
[    7.756003] calling  init_nls_cp864+0x0/0xf @ 1
[    7.760003] initcall init_nls_cp864+0x0/0xf returned 0 after 0 usecs
[    7.764003] calling  init_nls_cp865+0x0/0xf @ 1
[    7.768003] initcall init_nls_cp865+0x0/0xf returned 0 after 0 usecs
[    7.772003] calling  init_nls_cp874+0x0/0xf @ 1
[    7.776003] initcall init_nls_cp874+0x0/0xf returned 0 after 0 usecs
[    7.780003] calling  init_nls_cp936+0x0/0xf @ 1
[    7.784003] initcall init_nls_cp936+0x0/0xf returned 0 after 0 usecs
[    7.788003] calling  init_nls_cp950+0x0/0xf @ 1
[    7.792003] initcall init_nls_cp950+0x0/0xf returned 0 after 0 usecs
[    7.796003] calling  init_nls_cp1250+0x0/0xf @ 1
[    7.800003] initcall init_nls_cp1250+0x0/0xf returned 0 after 0 usecs
[    7.804003] calling  init_nls_cp1251+0x0/0xf @ 1
[    7.808003] initcall init_nls_cp1251+0x0/0xf returned 0 after 0 usecs
[    7.812003] calling  init_nls_iso8859_1+0x0/0xf @ 1
[    7.816004] initcall init_nls_iso8859_1+0x0/0xf returned 0 after 0 usecs
[    7.820003] calling  init_nls_iso8859_3+0x0/0xf @ 1
[    7.824003] initcall init_nls_iso8859_3+0x0/0xf returned 0 after 0 usecs
[    7.828003] calling  init_nls_iso8859_4+0x0/0xf @ 1
[    7.832004] initcall init_nls_iso8859_4+0x0/0xf returned 0 after 0 usecs
[    7.836003] calling  init_nls_iso8859_5+0x0/0xf @ 1
[    7.840003] initcall init_nls_iso8859_5+0x0/0xf returned 0 after 0 usecs
[    7.844004] calling  init_nls_iso8859_6+0x0/0xf @ 1
[    7.848004] initcall init_nls_iso8859_6+0x0/0xf returned 0 after 0 usecs
[    7.852003] calling  init_nls_iso8859_7+0x0/0xf @ 1
[    7.856004] initcall init_nls_iso8859_7+0x0/0xf returned 0 after 0 usecs
[    7.860003] calling  init_nls_cp1255+0x0/0xf @ 1
[    7.864004] initcall init_nls_cp1255+0x0/0xf returned 0 after 0 usecs
[    7.868003] calling  init_nls_iso8859_9+0x0/0xf @ 1
[    7.872004] initcall init_nls_iso8859_9+0x0/0xf returned 0 after 0 usecs
[    7.876003] calling  init_nls_iso8859_13+0x0/0xf @ 1
[    7.880004] initcall init_nls_iso8859_13+0x0/0xf returned 0 after 0 usecs
[    7.884003] calling  init_nls_iso8859_15+0x0/0xf @ 1
[    7.888004] initcall init_nls_iso8859_15+0x0/0xf returned 0 after 0 usecs
[    7.892003] calling  init_hpfs_fs+0x0/0x54 @ 1
[    7.896149] initcall init_hpfs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.900004] calling  init_ntfs_fs+0x0/0x1d3 @ 1
[    7.904001] NTFS driver 2.1.29 [Flags: R/W DEBUG].
[    7.908734] initcall init_ntfs_fs+0x0/0x1d3 returned 0 after 3906 usecs
[    7.912004] calling  init_ufs_fs+0x0/0x54 @ 1
[    7.916137] initcall init_ufs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.920004] calling  logfs_init+0x0/0x62 @ 1
[    7.924225] initcall logfs_init+0x0/0x62 returned 0 after 0 usecs
[    7.928004] calling  init_romfs_fs+0x0/0x73 @ 1
[    7.932001] ROMFS MTD (C) 2007 Red Hat, Inc.
[    7.936139] initcall init_romfs_fs+0x0/0x73 returned 0 after 3906 usecs
[    7.940004] calling  init_adfs_fs+0x0/0x54 @ 1
[    7.944138] initcall init_adfs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.948004] calling  init_udf_fs+0x0/0x54 @ 1
[    7.952139] initcall init_udf_fs+0x0/0x54 returned 0 after 0 usecs
[    7.956004] calling  init_jfs_fs+0x0/0x17c @ 1
[    7.960287] JFS: nTxBlock = 7930, nTxLock = 63443
[    7.970162] initcall init_jfs_fs+0x0/0x17c returned 0 after 7812 usecs
[    7.972005] calling  init_xfs_fs+0x0/0x99 @ 1
[    7.976002] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled
[    7.984830] SGI XFS Quota Management subsystem
[    7.988019] initcall init_xfs_fs+0x0/0x99 returned 0 after 11718 usecs
[    7.996004] calling  init_nilfs_fs+0x0/0xc8 @ 1
[    8.000571] NILFS version 2 loaded
[    8.004005] initcall init_nilfs_fs+0x0/0xc8 returned 0 after 3906 usecs
[    8.008003] calling  init_befs_fs+0x0/0x6d @ 1
[    8.016002] BeFS version: 0.9.3
[    8.019281] initcall init_befs_fs+0x0/0x6d returned 0 after 0 usecs
[    8.024004] calling  init_btrfs_fs+0x0/0x83 @ 1
[    8.029031] device: 'btrfs-control': device_add
[    8.032021] PM: Adding info for No Bus:btrfs-control
[    8.040051] Btrfs loaded
[    8.042584] initcall init_btrfs_fs+0x0/0x83 returned 0 after 11718 usecs
[    8.048004] calling  init_gfs2_fs+0x0/0x1e4 @ 1
[    8.052911] GFS2 (built Jun 11 2010 12:26:03) installed
[    8.060006] initcall init_gfs2_fs+0x0/0x1e4 returned 0 after 7812 usecs
[    8.064003] calling  ipc_init+0x0/0x2a @ 1
[    8.068017] msgmni has been set to 1982
[    8.072015] initcall ipc_init+0x0/0x2a returned 0 after 3906 usecs
[    8.080003] calling  key_proc_init+0x0/0x4e @ 1
[    8.084014] initcall key_proc_init+0x0/0x4e returned 0 after 0 usecs
[    8.092003] calling  crypto_wq_init+0x0/0x29 @ 1
[    8.096042] initcall crypto_wq_init+0x0/0x29 returned 0 after 0 usecs
[    8.100003] calling  crypto_algapi_init+0x0/0xc @ 1
[    8.108011] initcall crypto_algapi_init+0x0/0xc returned 0 after 0 usecs
[    8.112003] calling  skcipher_module_init+0x0/0x29 @ 1
[    8.120003] initcall skcipher_module_init+0x0/0x29 returned 0 after 0 usecs
[    8.124003] calling  chainiv_module_init+0x0/0xf @ 1
[    8.132005] initcall chainiv_module_init+0x0/0xf returned 0 after 0 usecs
[    8.136003] calling  eseqiv_module_init+0x0/0xf @ 1
[    8.144003] initcall eseqiv_module_init+0x0/0xf returned 0 after 0 usecs
[    8.148003] calling  seqiv_module_init+0x0/0xf @ 1
[    8.152003] initcall seqiv_module_init+0x0/0xf returned 0 after 0 usecs
[    8.160003] calling  hmac_module_init+0x0/0xf @ 1
[    8.164003] initcall hmac_module_init+0x0/0xf returned 0 after 0 usecs
[    8.172003] calling  vmac_module_init+0x0/0xf @ 1
[    8.176003] initcall vmac_module_init+0x0/0xf returned 0 after 0 usecs
[    8.184003] calling  crypto_xcbc_module_init+0x0/0xf @ 1
[    8.188003] initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.196003] calling  md4_mod_init+0x0/0xf @ 1
[    8.200082] initcall md4_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.200090] cryptomgr_test used greatest stack depth: 2988 bytes left
[    8.204004] calling  md5_mod_init+0x0/0xf @ 1
[    8.208073] initcall md5_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.216008] calling  rmd128_mod_init+0x0/0xf @ 1
[    8.220073] initcall rmd128_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.224029] calling  rmd256_mod_init+0x0/0xf @ 1
[    8.228070] initcall rmd256_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.232027] calling  sha1_generic_mod_init+0x0/0xf @ 1
[    8.240060] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.240073] cryptomgr_test used greatest stack depth: 2816 bytes left
[    8.244030] calling  sha256_generic_mod_init+0x0/0x33 @ 1
[    8.248085] initcall sha256_generic_mod_init+0x0/0x33 returned 0 after 0 usecs
[    8.256029] calling  sha512_generic_mod_init+0x0/0x33 @ 1
[    8.264113] cryptomgr_test used greatest stack depth: 2692 bytes left
[    8.271099] initcall sha512_generic_mod_init+0x0/0x33 returned 0 after 3906 usecs
[    8.272051] calling  wp512_mod_init+0x0/0x52 @ 1
[    8.276196] initcall wp512_mod_init+0x0/0x52 returned 0 after 0 usecs
[    8.284008] calling  tgr192_mod_init+0x0/0x52 @ 1
[    8.288106] initcall tgr192_mod_init+0x0/0x52 returned 0 after 0 usecs
[    8.292093] calling  crypto_ecb_module_init+0x0/0xf @ 1
[    8.296004] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 0 usecs
[    8.300003] calling  crypto_cbc_module_init+0x0/0xf @ 1
[    8.304004] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.308003] calling  crypto_pcbc_module_init+0x0/0xf @ 1
[    8.312003] initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.316003] calling  crypto_module_init+0x0/0xf @ 1
[    8.320004] initcall crypto_module_init+0x0/0xf returned 0 after 0 usecs
[    8.324014] calling  crypto_ctr_module_init+0x0/0x35 @ 1
[    8.328003] initcall crypto_ctr_module_init+0x0/0x35 returned 0 after 0 usecs
[    8.332003] calling  crypto_gcm_module_init+0x0/0xd0 @ 1
[    8.336005] initcall crypto_gcm_module_init+0x0/0xd0 returned 0 after 0 usecs
[    8.340003] calling  crypto_ccm_module_init+0x0/0x4f @ 1
[    8.344004] initcall crypto_ccm_module_init+0x0/0x4f returned 0 after 0 usecs
[    8.348003] calling  pcrypt_init+0x0/0xc9 @ 1
[    8.352053] initcall pcrypt_init+0x0/0xc9 returned 0 after 0 usecs
[    8.356005] calling  cryptd_init+0x0/0xc8 @ 1
[    8.360008] initcall cryptd_init+0x0/0xc8 returned 0 after 0 usecs
[    8.368006] calling  des_generic_mod_init+0x0/0x33 @ 1
[    8.372081] initcall des_generic_mod_init+0x0/0x33 returned 0 after 0 usecs
[    8.376004] calling  fcrypt_mod_init+0x0/0xf @ 1
[    8.380043] alg: No test for fcrypt (fcrypt-generic)
[    8.384008] initcall fcrypt_mod_init+0x0/0xf returned 0 after 3906 usecs
[    8.392048] calling  blowfish_mod_init+0x0/0xf @ 1
[    8.396723] initcall blowfish_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.400005] calling  twofish_mod_init+0x0/0xf @ 1
[    8.404205] initcall twofish_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.412030] calling  serpent_mod_init+0x0/0x33 @ 1
[    8.416098] initcall serpent_mod_init+0x0/0x33 returned 0 after 0 usecs
[    8.420028] calling  aes_init+0x0/0xf @ 1
[    8.424087] initcall aes_init+0x0/0xf returned 0 after 0 usecs
[    8.428052] calling  camellia_init+0x0/0xf @ 1
[    8.436076] initcall camellia_init+0x0/0xf returned 0 after 0 usecs
[    8.440028] calling  cast5_mod_init+0x0/0xf @ 1
[    8.444067] initcall cast5_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.452031] calling  arc4_init+0x0/0xf @ 1
[    8.456081] initcall arc4_init+0x0/0xf returned 0 after 0 usecs
[    8.460029] calling  tea_mod_init+0x0/0x52 @ 1
[    8.464074] initcall tea_mod_init+0x0/0x52 returned 0 after 0 usecs
[    8.468031] calling  khazad_mod_init+0x0/0xf @ 1
[    8.472082] initcall khazad_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.476070] calling  anubis_mod_init+0x0/0xf @ 1
[    8.480121] initcall anubis_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.488033] calling  seed_init+0x0/0xf @ 1
[    8.492067] initcall seed_init+0x0/0xf returned 0 after 0 usecs
[    8.496033] calling  salsa20_generic_mod_init+0x0/0xf @ 1
[    8.500046] initcall salsa20_generic_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.508031] calling  deflate_mod_init+0x0/0xf @ 1
[    8.512612] initcall deflate_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.516032] calling  zlib_mod_init+0x0/0xf @ 1
[    8.520962] initcall zlib_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.520980] cryptomgr_test used greatest stack depth: 2664 bytes left
[    8.532034] calling  crc32c_mod_init+0x0/0xf @ 1
[    8.536115] initcall crc32c_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.540035] calling  crypto_authenc_module_init+0x0/0xf @ 1
[    8.544005] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.548003] calling  lzo_mod_init+0x0/0xf @ 1
[    8.552072] initcall lzo_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.560032] calling  krng_mod_init+0x0/0xf @ 1
[    8.564045] alg: No test for stdrng (krng)
[    8.568008] initcall krng_mod_init+0x0/0xf returned 0 after 3906 usecs
[    8.572029] calling  prng_mod_init+0x0/0x1d @ 1
[    8.587720] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    8.588008] initcall prng_mod_init+0x0/0x1d returned 0 after 11718 usecs
[    8.596026] calling  ghash_mod_init+0x0/0xf @ 1
[    8.600125] initcall ghash_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.604025] calling  async_pq_init+0x0/0x3c @ 1
[    8.608005] initcall async_pq_init+0x0/0x3c returned 0 after 0 usecs
[    8.612003] calling  proc_genhd_init+0x0/0x31 @ 1
[    8.616023] initcall proc_genhd_init+0x0/0x31 returned 0 after 0 usecs
[    8.620027] calling  init_cgroup_blkio+0x0/0xf @ 1
[    8.624004] initcall init_cgroup_blkio+0x0/0xf returned 0 after 0 usecs
[    8.628003] calling  noop_init+0x0/0x11 @ 1
[    8.632002] io scheduler noop registered
[    8.636003] initcall noop_init+0x0/0x11 returned 0 after 3906 usecs
[    8.640003] calling  cfq_init+0x0/0x93 @ 1
[    8.644342] io scheduler cfq registered (default)
[    8.648007] initcall cfq_init+0x0/0x93 returned 0 after 3906 usecs
[    8.652003] calling  btree_module_init+0x0/0x24 @ 1
[    8.656161] initcall btree_module_init+0x0/0x24 returned 0 after 0 usecs
[    8.660003] calling  debug_objects_init_debugfs+0x0/0x57 @ 1
[    8.664033] initcall debug_objects_init_debugfs+0x0/0x57 returned 0 after 0 usecs
[    8.668006] calling  libcrc32c_mod_init+0x0/0x25 @ 1
[    8.672009] initcall libcrc32c_mod_init+0x0/0x25 returned 0 after 0 usecs
[    8.676003] calling  percpu_counter_startup+0x0/0x16 @ 1
[    8.680006] initcall percpu_counter_startup+0x0/0x16 returned 0 after 0 usecs
[    8.684007] calling  err_inject_init+0x0/0x19 @ 1
[    8.688003] initcall err_inject_init+0x0/0x19 returned 0 after 0 usecs
[    8.692003] calling  dynamic_debug_init+0x0/0xf9 @ 1
[    8.696480] initcall dynamic_debug_init+0x0/0xf9 returned 0 after 0 usecs
[    8.700006] calling  adp5588_gpio_init+0x0/0x11 @ 1
[    8.704005] bus: 'i2c': add driver adp5588-gpio
[    8.708068] i2c-core: driver [adp5588-gpio] registered
[    8.712005] initcall adp5588_gpio_init+0x0/0x11 returned 0 after 7812 usecs
[    8.716004] calling  lnw_gpio_init+0x0/0x16 @ 1
[    8.720003] bus: 'pci': add driver langwell_gpio
[    8.724064] initcall lnw_gpio_init+0x0/0x16 returned 0 after 3906 usecs
[    8.728003] calling  bt8xxgpio_init+0x0/0x16 @ 1
[    8.732002] bus: 'pci': add driver bt8xxgpio
[    8.736059] initcall bt8xxgpio_init+0x0/0x16 returned 0 after 3906 usecs
[    8.740003] calling  it8761e_gpio_init+0x0/0x178 @ 1
[    8.744037] initcall it8761e_gpio_init+0x0/0x178 returned -19 after 0 usecs
[    8.748003] calling  sch_gpio_init+0x0/0xf @ 1
[    8.752004] bus: 'platform': add driver sch_gpio
[    8.756057] initcall sch_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    8.760003] calling  rdc321x_gpio_init+0x0/0xf @ 1
[    8.764002] bus: 'platform': add driver rdc321x-gpio
[    8.768056] initcall rdc321x_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    8.772003] calling  pci_proc_init+0x0/0x5b @ 1
[    8.776163] initcall pci_proc_init+0x0/0x5b returned 0 after 0 usecs
[    8.780003] calling  pcie_portdrv_init+0x0/0x4b @ 1
[    8.784066] bus: 'pci_express': registered
[    8.788002] bus: 'pci': add driver pcieport
[    8.792011] bus: 'pci': driver_probe_device: matched device 0000:00:0b.0 with driver pcieport
[    8.796002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0b.0
[    8.800028] pcieport 0000:00:0b.0: setting latency timer to 64
[    8.804153] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    8.808027] device: '0000:00:0b.0:pcie01': device_add
[    8.812007] bus: 'pci_express': add device 0000:00:0b.0:pcie01
[    8.816025] PM: Adding info for pci_express:0000:00:0b.0:pcie01
[    8.820174] driver: '0000:00:0b.0': driver_bound: bound to device 'pcieport'
[    8.824003] bus: 'pci': really_probe: bound device 0000:00:0b.0 to driver pcieport
[    8.828003] bus: 'pci': driver_probe_device: matched device 0000:00:0c.0 with driver pcieport
[    8.832002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0c.0
[    8.836024] pcieport 0000:00:0c.0: setting latency timer to 64
[    8.840147] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    8.844025] device: '0000:00:0c.0:pcie01': device_add
[    8.848006] bus: 'pci_express': add device 0000:00:0c.0:pcie01
[    8.852020] PM: Adding info for pci_express:0000:00:0c.0:pcie01
[    8.856171] driver: '0000:00:0c.0': driver_bound: bound to device 'pcieport'
[    8.860002] bus: 'pci': really_probe: bound device 0000:00:0c.0 to driver pcieport
[    8.864003] bus: 'pci': driver_probe_device: matched device 0000:00:0d.0 with driver pcieport
[    8.868002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0d.0
[    8.872024] pcieport 0000:00:0d.0: setting latency timer to 64
[    8.876147] pcieport 0000:00:0d.0: irq 43 for MSI/MSI-X
[    8.880025] device: '0000:00:0d.0:pcie01': device_add
[    8.884006] bus: 'pci_express': add device 0000:00:0d.0:pcie01
[    8.888011] PM: Adding info for pci_express:0000:00:0d.0:pcie01
[    8.892171] driver: '0000:00:0d.0': driver_bound: bound to device 'pcieport'
[    8.896002] bus: 'pci': really_probe: bound device 0000:00:0d.0 to driver pcieport
[    8.900003] bus: 'pci': driver_probe_device: matched device 0000:00:0e.0 with driver pcieport
[    8.904002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0e.0
[    8.908024] pcieport 0000:00:0e.0: setting latency timer to 64
[    8.912146] pcieport 0000:00:0e.0: irq 44 for MSI/MSI-X
[    8.916025] device: '0000:00:0e.0:pcie01': device_add
[    8.920015] bus: 'pci_express': add device 0000:00:0e.0:pcie01
[    8.924011] PM: Adding info for pci_express:0000:00:0e.0:pcie01
[    8.928171] driver: '0000:00:0e.0': driver_bound: bound to device 'pcieport'
[    8.932002] bus: 'pci': really_probe: bound device 0000:00:0e.0 to driver pcieport
[    8.936056] initcall pcie_portdrv_init+0x0/0x4b returned 0 after 148437 usecs
[    8.940003] calling  pci_hotplug_init+0x0/0x41 @ 1
[    8.944002] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.948003] initcall pci_hotplug_init+0x0/0x41 returned 0 after 3906 usecs
[    8.952003] calling  cpqhpc_init+0x0/0x5a @ 1
[    8.956002] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
[    8.960020] bus: 'pci': add driver compaq_pci_hotplug
[    8.964063] initcall cpqhpc_init+0x0/0x5a returned 0 after 7812 usecs
[    8.968003] calling  pcied_init+0x0/0x62 @ 1
[    8.972002] bus: 'pci_express': add driver pciehp
[    8.976054] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    8.980003] initcall pcied_init+0x0/0x62 returned 0 after 7812 usecs
[    8.984003] calling  zt5550_init+0x0/0x6c @ 1
[    8.988002] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[    8.992004] bus: 'pci': add driver zt5550_hc
[    8.996070] initcall zt5550_init+0x0/0x6c returned 0 after 7812 usecs
[    9.000004] calling  cpcihp_generic_init+0x0/0x3b0 @ 1
[    9.004002] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[    9.008002] cpcihp_generic: not configured, disabling.
[    9.012003] initcall cpcihp_generic_init+0x0/0x3b0 returned -22 after 7812 usecs
[    9.016003] initcall cpcihp_generic_init+0x0/0x3b0 returned with error code -22 
[    9.020003] calling  shpcd_init+0x0/0x4e @ 1
[    9.024002] bus: 'pci': add driver shpchp
[    9.028070] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.032004] initcall shpcd_init+0x0/0x4e returned 0 after 7812 usecs
[    9.036003] calling  init_legacy+0x0/0x36 @ 1
[    9.040200] initcall init_legacy+0x0/0x36 returned 0 after 0 usecs
[    9.044003] calling  pci_stub_init+0x0/0xf2 @ 1
[    9.048004] bus: 'pci': add driver pci-stub
[    9.052061] pci-stub: invalid id string ""
[    9.056004] initcall pci_stub_init+0x0/0xf2 returned 0 after 7812 usecs
[    9.060003] calling  genericbl_init+0x0/0xf @ 1
[    9.064003] bus: 'platform': add driver generic-bl
[    9.068055] initcall genericbl_init+0x0/0xf returned 0 after 3906 usecs
[    9.072003] calling  progearbl_init+0x0/0x49 @ 1
[    9.076002] bus: 'platform': add driver progear-bl
[    9.080057] Registering platform device 'progear-bl'. Parent at platform
[    9.084003] device: 'progear-bl': device_add
[    9.088006] bus: 'platform': add device progear-bl
[    9.092013] PM: Adding info for platform:progear-bl
[    9.096053] bus: 'platform': driver_probe_device: matched device progear-bl with driver progear-bl
[    9.100002] bus: 'platform': really_probe: probing driver progear-bl with device progear-bl
[    9.104011] ALI M7101 PMU not found.
[    9.108014] initcall progearbl_init+0x0/0x49 returned 0 after 31250 usecs
[    9.112004] calling  cr_backlight_init+0x0/0x56 @ 1
[    9.116002] bus: 'platform': add driver cr_backlight
[    9.120056] Registering platform device 'cr_backlight'. Parent at platform
[    9.124003] device: 'cr_backlight': device_add
[    9.128005] bus: 'platform': add device cr_backlight
[    9.132012] PM: Adding info for platform:cr_backlight
[    9.136065] bus: 'platform': driver_probe_device: matched device cr_backlight with driver cr_backlight
[    9.140002] bus: 'platform': really_probe: probing driver cr_backlight with device cr_backlight
[    9.144011] INTEL CARILLO RANCH LPC not found.
[    9.148009] Carillo Ranch Backlight Driver Initialized.
[    9.152004] initcall cr_backlight_init+0x0/0x56 returned 0 after 35156 usecs
[    9.156003] calling  da903x_backlight_init+0x0/0xf @ 1
[    9.160003] bus: 'platform': add driver da903x-backlight
[    9.164066] initcall da903x_backlight_init+0x0/0xf returned 0 after 3906 usecs
[    9.168003] calling  adp8860_init+0x0/0x11 @ 1
[    9.172003] bus: 'i2c': add driver adp8860_bl
[    9.176054] i2c-core: driver [adp8860_bl] registered
[    9.180004] initcall adp8860_init+0x0/0x11 returned 0 after 7812 usecs
[    9.184003] calling  pm860x_backlight_init+0x0/0xf @ 1
[    9.188002] bus: 'platform': add driver 88pm860x-backlight
[    9.192056] initcall pm860x_backlight_init+0x0/0xf returned 0 after 3906 usecs
[    9.196003] calling  display_class_init+0x0/0x69 @ 1
[    9.200003] device class 'display': registering
[    9.204056] initcall display_class_init+0x0/0x69 returned 0 after 3906 usecs
[    9.208003] calling  arcfb_init+0x0/0x60 @ 1
[    9.212003] initcall arcfb_init+0x0/0x60 returned -6 after 0 usecs
[    9.216003] initcall arcfb_init+0x0/0x60 returned with error code -6 
[    9.220003] calling  cyber2000fb_init+0x0/0xac @ 1
[    9.224003] bus: 'pci': add driver CyberPro
[    9.228063] initcall cyber2000fb_init+0x0/0xac returned 0 after 3906 usecs
[    9.232004] calling  nvidiafb_init+0x0/0x26a @ 1
[    9.236002] bus: 'pci': add driver nvidiafb
[    9.240061] initcall nvidiafb_init+0x0/0x26a returned 0 after 3906 usecs
[    9.244003] calling  atyfb_init+0x0/0x1dd @ 1
[    9.248002] bus: 'pci': add driver atyfb
[    9.252065] initcall atyfb_init+0x0/0x1dd returned 0 after 3906 usecs
[    9.256003] calling  aty128fb_init+0x0/0x113 @ 1
[    9.260002] bus: 'pci': add driver aty128fb
[    9.264065] initcall aty128fb_init+0x0/0x113 returned 0 after 3906 usecs
[    9.268003] calling  sisfb_init+0x0/0x6eb @ 1
[    9.272002] bus: 'pci': add driver sisfb
[    9.276062] initcall sisfb_init+0x0/0x6eb returned 0 after 3906 usecs
[    9.280003] calling  kyrofb_init+0x0/0xc9 @ 1
[    9.284002] bus: 'pci': add driver kyrofb
[    9.288071] initcall kyrofb_init+0x0/0xc9 returned 0 after 3906 usecs
[    9.292003] calling  savagefb_init+0x0/0x60 @ 1
[    9.296003] bus: 'pci': add driver savagefb
[    9.300063] initcall savagefb_init+0x0/0x60 returned 0 after 3906 usecs
[    9.304004] calling  gx1fb_init+0x0/0x104 @ 1
[    9.308003] bus: 'pci': add driver gx1fb
[    9.312062] initcall gx1fb_init+0x0/0x104 returned 0 after 3906 usecs
[    9.316003] calling  gxfb_init+0x0/0x6c @ 1
[    9.320002] bus: 'pci': add driver gxfb
[    9.324061] initcall gxfb_init+0x0/0x6c returned 0 after 3906 usecs
[    9.328003] calling  lxfb_init+0x0/0xc9 @ 1
[    9.332002] bus: 'pci': add driver lxfb
[    9.336062] initcall lxfb_init+0x0/0xc9 returned 0 after 3906 usecs
[    9.340003] calling  neofb_init+0x0/0x12e @ 1
[    9.344002] bus: 'pci': add driver neofb
[    9.348062] initcall neofb_init+0x0/0x12e returned 0 after 3906 usecs
[    9.352003] calling  imsttfb_init+0x0/0xd6 @ 1
[    9.356002] bus: 'pci': add driver imsttfb
[    9.360062] initcall imsttfb_init+0x0/0xd6 returned 0 after 3906 usecs
[    9.364003] calling  vt8623fb_init+0x0/0x75 @ 1
[    9.368002] bus: 'pci': add driver vt8623fb
[    9.372072] initcall vt8623fb_init+0x0/0x75 returned 0 after 3906 usecs
[    9.376004] calling  tridentfb_init+0x0/0x1da @ 1
[    9.380003] bus: 'pci': add driver tridentfb
[    9.384063] initcall tridentfb_init+0x0/0x1da returned 0 after 3906 usecs
[    9.388003] calling  vmlfb_init+0x0/0x7f @ 1
[    9.392002] vmlfb: initializing
[    9.396002] bus: 'pci': add driver vmlfb
[    9.400062] initcall vmlfb_init+0x0/0x7f returned 0 after 7812 usecs
[    9.404003] calling  cr_pll_init+0x0/0xc2 @ 1
[    9.408007] Could not find Carillo Ranch MCH device.
[    9.412003] initcall cr_pll_init+0x0/0xc2 returned -19 after 3906 usecs
[    9.416003] calling  arkfb_init+0x0/0x75 @ 1
[    9.420002] bus: 'pci': add driver arkfb
[    9.424062] initcall arkfb_init+0x0/0x75 returned 0 after 3906 usecs
[    9.428003] calling  hecubafb_init+0x0/0xf @ 1
[    9.432003] bus: 'platform': add driver hecubafb
[    9.436056] initcall hecubafb_init+0x0/0xf returned 0 after 3906 usecs
[    9.440003] calling  n411_init+0x0/0x7c @ 1
[    9.444001] no IO addresses supplied
[    9.448003] initcall n411_init+0x0/0x7c returned -22 after 3906 usecs
[    9.452003] initcall n411_init+0x0/0x7c returned with error code -22 
[    9.456003] calling  hgafb_init+0x0/0x5d @ 1
[    9.460002] bus: 'platform': add driver hgafb
[    9.464058] Registering platform device 'hgafb.0'. Parent at platform
[    9.468010] device: 'hgafb.0': device_add
[    9.472006] bus: 'platform': add device hgafb.0
[    9.476022] PM: Adding info for platform:hgafb.0
[    9.480052] bus: 'platform': driver_probe_device: matched device hgafb.0 with driver hgafb
[    9.484002] bus: 'platform': really_probe: probing driver hgafb with device hgafb.0
[    9.488016] hgafb: HGA card not detected.
[    9.492008] hgafb: probe of hgafb.0 failed with error -22
[    9.496004] initcall hgafb_init+0x0/0x5d returned 0 after 35156 usecs
[    9.500003] calling  sstfb_init+0x0/0x18a @ 1
[    9.504003] bus: 'pci': add driver sstfb
[    9.508072] initcall sstfb_init+0x0/0x18a returned 0 after 3906 usecs
[    9.512004] calling  intel_idle_init+0x0/0x2f9 @ 1
[    9.516004] initcall intel_idle_init+0x0/0x2f9 returned -19 after 0 usecs
[    9.520003] calling  regulator_userspace_consumer_init+0x0/0xf @ 1
[    9.524003] bus: 'platform': add driver reg-userspace-consumer
[    9.528057] initcall regulator_userspace_consumer_init+0x0/0xf returned 0 after 3906 usecs
[    9.532003] calling  bq24022_init+0x0/0x14 @ 1
[    9.536003] bus: 'platform': add driver bq24022
[    9.540057] bus: 'platform': remove driver bq24022
[    9.544051] driver: 'bq24022': driver_release
[    9.548007] initcall bq24022_init+0x0/0x14 returned -19 after 11718 usecs
[    9.552003] calling  lp3971_module_init+0x0/0x2a @ 1
[    9.556003] bus: 'i2c': add driver LP3971
[    9.560055] i2c-core: driver [LP3971] registered
[    9.564004] initcall lp3971_module_init+0x0/0x2a returned 0 after 7812 usecs
[    9.568005] calling  rand_initialize+0x0/0x25 @ 1
[    9.572036] initcall rand_initialize+0x0/0x25 returned 0 after 0 usecs
[    9.576003] calling  tty_init+0x0/0xd5 @ 1
[    9.580010] device: 'tty': device_add
[    9.584018] PM: Adding info for No Bus:tty
[    9.588056] device: 'console': device_add
[    9.592015] PM: Adding info for No Bus:console
[    9.596061] device: 'tty0': device_add
[    9.600015] PM: Adding info for No Bus:tty0
[    9.604054] device class 'vc': registering
[    9.608067] device: 'vcs': device_add
[    9.612014] PM: Adding info for No Bus:vcs
[    9.616051] device: 'vcsa': device_add
[    9.620023] PM: Adding info for No Bus:vcsa
[    9.624052] device: 'vcs1': device_add
[    9.628014] PM: Adding info for No Bus:vcs1
[    9.632051] device: 'vcsa1': device_add
[    9.636014] PM: Adding info for No Bus:vcsa1
[    9.640059] device: 'tty1': device_add
[    9.644014] PM: Adding info for No Bus:tty1
[    9.648051] device: 'tty2': device_add
[    9.652014] PM: Adding info for No Bus:tty2
[    9.656051] device: 'tty3': device_add
[    9.660015] PM: Adding info for No Bus:tty3
[    9.664051] device: 'tty4': device_add
[    9.668024] PM: Adding info for No Bus:tty4
[    9.672052] device: 'tty5': device_add
[    9.676015] PM: Adding info for No Bus:tty5
[    9.680051] device: 'tty6': device_add
[    9.684014] PM: Adding info for No Bus:tty6
[    9.688050] device: 'tty7': device_add
[    9.692014] PM: Adding info for No Bus:tty7
[    9.696058] device: 'tty8': device_add
[    9.700015] PM: Adding info for No Bus:tty8
[    9.704051] device: 'tty9': device_add
[    9.708014] PM: Adding info for No Bus:tty9
[    9.712050] device: 'tty10': device_add
[    9.716023] PM: Adding info for No Bus:tty10
[    9.720051] device: 'tty11': device_add
[    9.724015] PM: Adding info for No Bus:tty11
[    9.728050] device: 'tty12': device_add
[    9.732015] PM: Adding info for No Bus:tty12
[    9.736058] device: 'tty13': device_add
[    9.740015] PM: Adding info for No Bus:tty13
[    9.744051] device: 'tty14': device_add
[    9.748025] PM: Adding info for No Bus:tty14
[    9.752051] device: 'tty15': device_add
[    9.755901] PM: Adding info for No Bus:tty15
[    9.756050] device: 'tty16': device_add
[    9.760024] PM: Adding info for No Bus:tty16
[    9.764051] device: 'tty17': device_add
[    9.768015] PM: Adding info for No Bus:tty17
[    9.772050] device: 'tty18': device_add
[    9.776015] PM: Adding info for No Bus:tty18
[    9.780050] device: 'tty19': device_add
[    9.784015] PM: Adding info for No Bus:tty19
[    9.788050] device: 'tty20': device_add
[    9.792015] PM: Adding info for No Bus:tty20
[    9.796057] device: 'tty21': device_add
[    9.800016] PM: Adding info for No Bus:tty21
[    9.804051] device: 'tty22': device_add
[    9.808024] PM: Adding info for No Bus:tty22
[    9.812051] device: 'tty23': device_add
[    9.816024] PM: Adding info for No Bus:tty23
[    9.820051] device: 'tty24': device_add
[    9.824015] PM: Adding info for No Bus:tty24
[    9.828050] device: 'tty25': device_add
[    9.832015] PM: Adding info for No Bus:tty25
[    9.836050] device: 'tty26': device_add
[    9.840015] PM: Adding info for No Bus:tty26
[    9.844050] device: 'tty27': device_add
[    9.848015] PM: Adding info for No Bus:tty27
[    9.852050] device: 'tty28': device_add
[    9.856025] PM: Adding info for No Bus:tty28
[    9.860051] device: 'tty29': device_add
[    9.864016] PM: Adding info for No Bus:tty29
[    9.868050] device: 'tty30': device_add
[    9.872015] PM: Adding info for No Bus:tty30
[    9.876050] device: 'tty31': device_add
[    9.880016] PM: Adding info for No Bus:tty31
[    9.884050] device: 'tty32': device_add
[    9.888016] PM: Adding info for No Bus:tty32
[    9.892060] device: 'tty33': device_add
[    9.896017] PM: Adding info for No Bus:tty33
[    9.900058] device: 'tty34': device_add
[    9.904025] PM: Adding info for No Bus:tty34
[    9.908051] device: 'tty35': device_add
[    9.912016] PM: Adding info for No Bus:tty35
[    9.916050] device: 'tty36': device_add
[    9.920016] PM: Adding info for No Bus:tty36
[    9.924050] device: 'tty37': device_add
[    9.928016] PM: Adding info for No Bus:tty37
[    9.932050] device: 'tty38': device_add
[    9.936016] PM: Adding info for No Bus:tty38
[    9.940050] device: 'tty39': device_add
[    9.943894] PM: Adding info for No Bus:tty39
[    9.944050] device: 'tty40': device_add
[    9.948025] PM: Adding info for No Bus:tty40
[    9.952059] device: 'tty41': device_add
[    9.956017] PM: Adding info for No Bus:tty41
[    9.960051] device: 'tty42': device_add
[    9.964016] PM: Adding info for No Bus:tty42
[    9.968050] device: 'tty43': device_add
[    9.972016] PM: Adding info for No Bus:tty43
[    9.976050] device: 'tty44': device_add
[    9.980016] PM: Adding info for No Bus:tty44
[    9.984050] device: 'tty45': device_add
[    9.988016] PM: Adding info for No Bus:tty45
[    9.992050] device: 'tty46': device_add
[    9.996026] PM: Adding info for No Bus:tty46
[   10.000058] device: 'tty47': device_add
[   10.004017] PM: Adding info for No Bus:tty47
[   10.008051] device: 'tty48': device_add
[   10.012016] PM: Adding info for No Bus:tty48
[   10.016050] device: 'tty49': device_add
[   10.020016] PM: Adding info for No Bus:tty49
[   10.024050] device: 'tty50': device_add
[   10.028016] PM: Adding info for No Bus:tty50
[   10.032050] device: 'tty51': device_add
[   10.036028] PM: Adding info for No Bus:tty51
[   10.040051] device: 'tty52': device_add
[   10.044044] PM: Adding info for No Bus:tty52
[   10.048051] device: 'tty53': device_add
[   10.052024] PM: Adding info for No Bus:tty53
[   10.056050] device: 'tty54': device_add
[   10.060024] PM: Adding info for No Bus:tty54
[   10.064050] device: 'tty55': device_add
[   10.068016] PM: Adding info for No Bus:tty55
[   10.072051] device: 'tty56': device_add
[   10.076016] PM: Adding info for No Bus:tty56
[   10.080050] device: 'tty57': device_add
[   10.084027] PM: Adding info for No Bus:tty57
[   10.088052] device: 'tty58': device_add
[   10.092026] PM: Adding info for No Bus:tty58
[   10.096052] device: 'tty59': device_add
[   10.100017] PM: Adding info for No Bus:tty59
[   10.104057] device: 'tty60': device_add
[   10.108018] PM: Adding info for No Bus:tty60
[   10.112051] device: 'tty61': device_add
[   10.116017] PM: Adding info for No Bus:tty61
[   10.120050] device: 'tty62': device_add
[   10.123892] PM: Adding info for No Bus:tty62
[   10.124050] device: 'tty63': device_add
[   10.128017] PM: Adding info for No Bus:tty63
[   10.132054] initcall tty_init+0x0/0xd5 returned 0 after 539062 usecs
[   10.136005] calling  pty_init+0x0/0x40e @ 1
[   10.140023] device: 'ptyp0': device_add
[   10.144026] PM: Adding info for No Bus:ptyp0
[   10.148052] device: 'ptyp1': device_add
[   10.152016] PM: Adding info for No Bus:ptyp1
[   10.156050] device: 'ptyp2': device_add
[   10.160016] PM: Adding info for No Bus:ptyp2
[   10.164050] device: 'ptyp3': device_add
[   10.168016] PM: Adding info for No Bus:ptyp3
[   10.172058] device: 'ptyp4': device_add
[   10.176017] PM: Adding info for No Bus:ptyp4
[   10.180051] device: 'ptyp5': device_add
[   10.184027] PM: Adding info for No Bus:ptyp5
[   10.192032] device: 'ptyp6': device_add
[   10.195890] PM: Adding info for No Bus:ptyp6
[   10.196051] device: 'ptyp7': device_add
[   10.200016] PM: Adding info for No Bus:ptyp7
[   10.204050] device: 'ptyp8': device_add
[   10.208016] PM: Adding info for No Bus:ptyp8
[   10.212057] device: 'ptyp9': device_add
[   10.216017] PM: Adding info for No Bus:ptyp9
[   10.220051] device: 'ptypa': device_add
[   10.224017] PM: Adding info for No Bus:ptypa
[   10.228050] device: 'ptypb': device_add
[   10.232017] PM: Adding info for No Bus:ptypb
[   10.236050] device: 'ptypc': device_add
[   10.240026] PM: Adding info for No Bus:ptypc
[   10.244052] device: 'ptypd': device_add
[   10.248017] PM: Adding info for No Bus:ptypd
[   10.252050] device: 'ptype': device_add
[   10.256017] PM: Adding info for No Bus:ptype
[   10.260050] device: 'ptypf': device_add
[   10.264017] PM: Adding info for No Bus:ptypf
[   10.268050] device: 'ptyq0': device_add
[   10.272017] PM: Adding info for No Bus:ptyq0
[   10.276050] device: 'ptyq1': device_add
[   10.280017] PM: Adding info for No Bus:ptyq1
[   10.284050] device: 'ptyq2': device_add
[   10.288026] PM: Adding info for No Bus:ptyq2
[   10.292051] device: 'ptyq3': device_add
[   10.296017] PM: Adding info for No Bus:ptyq3
[   10.300050] device: 'ptyq4': device_add
[   10.304017] PM: Adding info for No Bus:ptyq4
[   10.308050] device: 'ptyq5': device_add
[   10.312018] PM: Adding info for No Bus:ptyq5
[   10.316057] device: 'ptyq6': device_add
[   10.320019] PM: Adding info for No Bus:ptyq6
[   10.324051] device: 'ptyq7': device_add
[   10.328030] PM: Adding info for No Bus:ptyq7
[   10.332052] device: 'ptyq8': device_add
[   10.336027] PM: Adding info for No Bus:ptyq8
[   10.340051] device: 'ptyq9': device_add
[   10.344018] PM: Adding info for No Bus:ptyq9
[   10.348050] device: 'ptyqa': device_add
[   10.352018] PM: Adding info for No Bus:ptyqa
[   10.356050] device: 'ptyqb': device_add
[   10.360018] PM: Adding info for No Bus:ptyqb
[   10.364050] device: 'ptyqc': device_add
[   10.368018] PM: Adding info for No Bus:ptyqc
[   10.376006] device: 'ptyqd': device_add
[   10.379857] PM: Adding info for No Bus:ptyqd
[   10.380050] device: 'ptyqe': device_add
[   10.384027] PM: Adding info for No Bus:ptyqe
[   10.388051] device: 'ptyqf': device_add
[   10.392018] PM: Adding info for No Bus:ptyqf
[   10.396058] device: 'ptyr0': device_add
[   10.400019] PM: Adding info for No Bus:ptyr0
[   10.404051] device: 'ptyr1': device_add
[   10.408018] PM: Adding info for No Bus:ptyr1
[   10.412050] device: 'ptyr2': device_add
[   10.416019] PM: Adding info for No Bus:ptyr2
[   10.420058] device: 'ptyr3': device_add
[   10.424020] PM: Adding info for No Bus:ptyr3
[   10.428051] device: 'ptyr4': device_add
[   10.432028] PM: Adding info for No Bus:ptyr4
[   10.436052] device: 'ptyr5': device_add
[   10.440019] PM: Adding info for No Bus:ptyr5
[   10.444050] device: 'ptyr6': device_add
[   10.448019] PM: Adding info for No Bus:ptyr6
[   10.452050] device: 'ptyr7': device_add
[   10.456019] PM: Adding info for No Bus:ptyr7
[   10.460050] device: 'ptyr8': device_add
[   10.464019] PM: Adding info for No Bus:ptyr8
[   10.468050] device: 'ptyr9': device_add
[   10.472019] PM: Adding info for No Bus:ptyr9
[   10.476060] device: 'ptyra': device_add
[   10.480029] PM: Adding info for No Bus:ptyra
[   10.484052] device: 'ptyrb': device_add
[   10.488020] PM: Adding info for No Bus:ptyrb
[   10.492050] device: 'ptyrc': device_add
[   10.496020] PM: Adding info for No Bus:ptyrc
[   10.500050] device: 'ptyrd': device_add
[   10.504020] PM: Adding info for No Bus:ptyrd
[   10.508050] device: 'ptyre': device_add
[   10.512020] PM: Adding info for No Bus:ptyre
[   10.516050] device: 'ptyrf': device_add
[   10.520020] PM: Adding info for No Bus:ptyrf
[   10.524058] device: 'ptys0': device_add
[   10.528030] PM: Adding info for No Bus:ptys0
[   10.532052] device: 'ptys1': device_add
[   10.536020] PM: Adding info for No Bus:ptys1
[   10.540050] device: 'ptys2': device_add
[   10.544020] PM: Adding info for No Bus:ptys2
[   10.548050] device: 'ptys3': device_add
[   10.552020] PM: Adding info for No Bus:ptys3
[   10.556050] device: 'ptys4': device_add
[   10.559898] PM: Adding info for No Bus:ptys4
[   10.560050] device: 'ptys5': device_add
[   10.564020] PM: Adding info for No Bus:ptys5
[   10.568050] device: 'ptys6': device_add
[   10.572030] PM: Adding info for No Bus:ptys6
[   10.576051] device: 'ptys7': device_add
[   10.580021] PM: Adding info for No Bus:ptys7
[   10.584051] device: 'ptys8': device_add
[   10.588021] PM: Adding info for No Bus:ptys8
[   10.592050] device: 'ptys9': device_add
[   10.596031] PM: Adding info for No Bus:ptys9
[   10.600052] device: 'ptysa': device_add
[   10.604021] PM: Adding info for No Bus:ptysa
[   10.608050] device: 'ptysb': device_add
[   10.612021] PM: Adding info for No Bus:ptysb
[   10.616058] device: 'ptysc': device_add
[   10.620041] PM: Adding info for No Bus:ptysc
[   10.624059] device: 'ptysd': device_add
[   10.628022] PM: Adding info for No Bus:ptysd
[   10.632051] device: 'ptyse': device_add
[   10.636021] PM: Adding info for No Bus:ptyse
[   10.640050] device: 'ptysf': device_add
[   10.644021] PM: Adding info for No Bus:ptysf
[   10.648050] device: 'ptyt0': device_add
[   10.652021] PM: Adding info for No Bus:ptyt0
[   10.656050] device: 'ptyt1': device_add
[   10.660021] PM: Adding info for No Bus:ptyt1
[   10.664050] device: 'ptyt2': device_add
[   10.668031] PM: Adding info for No Bus:ptyt2
[   10.672052] device: 'ptyt3': device_add
[   10.676022] PM: Adding info for No Bus:ptyt3
[   10.680050] device: 'ptyt4': device_add
[   10.684022] PM: Adding info for No Bus:ptyt4
[   10.688050] device: 'ptyt5': device_add
[   10.692022] PM: Adding info for No Bus:ptyt5
[   10.696050] device: 'ptyt6': device_add
[   10.700022] PM: Adding info for No Bus:ptyt6
[   10.704050] device: 'ptyt7': device_add
[   10.708022] PM: Adding info for No Bus:ptyt7
[   10.712050] device: 'ptyt8': device_add
[   10.716032] PM: Adding info for No Bus:ptyt8
[   10.720052] device: 'ptyt9': device_add
[   10.724022] PM: Adding info for No Bus:ptyt9
[   10.728058] device: 'ptyta': device_add
[   10.732023] PM: Adding info for No Bus:ptyta
[   10.736051] device: 'ptytb': device_add
[   10.739898] PM: Adding info for No Bus:ptytb
[   10.740050] device: 'ptytc': device_add
[   10.744022] PM: Adding info for No Bus:ptytc
[   10.748050] device: 'ptytd': device_add
[   10.752022] PM: Adding info for No Bus:ptytd
[   10.756050] device: 'ptyte': device_add
[   10.760042] PM: Adding info for No Bus:ptyte
[   10.764052] device: 'ptytf': device_add
[   10.768023] PM: Adding info for No Bus:ptytf
[   10.772050] device: 'ptyu0': device_add
[   10.776022] PM: Adding info for No Bus:ptyu0
[   10.780050] device: 'ptyu1': device_add
[   10.784023] PM: Adding info for No Bus:ptyu1
[   10.788050] device: 'ptyu2': device_add
[   10.792023] PM: Adding info for No Bus:ptyu2
[   10.796050] device: 'ptyu3': device_add
[   10.800023] PM: Adding info for No Bus:ptyu3
[   10.804050] device: 'ptyu4': device_add
[   10.808033] PM: Adding info for No Bus:ptyu4
[   10.812052] device: 'ptyu5': device_add
[   10.816029] PM: Adding info for No Bus:ptyu5
[   10.820051] device: 'ptyu6': device_add
[   10.824023] PM: Adding info for No Bus:ptyu6
[   10.828058] device: 'ptyu7': device_add
[   10.832024] PM: Adding info for No Bus:ptyu7
[   10.836059] device: 'ptyu8': device_add
[   10.840026] PM: Adding info for No Bus:ptyu8
[   10.844051] device: 'ptyu9': device_add
[   10.848023] PM: Adding info for No Bus:ptyu9
[   10.852050] device: 'ptyua': device_add
[   10.856033] PM: Adding info for No Bus:ptyua
[   10.860052] device: 'ptyub': device_add
[   10.864023] PM: Adding info for No Bus:ptyub
[   10.868051] device: 'ptyuc': device_add
[   10.872023] PM: Adding info for No Bus:ptyuc
[   10.876050] device: 'ptyud': device_add
[   10.880024] PM: Adding info for No Bus:ptyud
[   10.884050] device: 'ptyue': device_add
[   10.888024] PM: Adding info for No Bus:ptyue
[   10.892050] device: 'ptyuf': device_add
[   10.896024] PM: Adding info for No Bus:ptyuf
[   10.900050] device: 'ptyv0': device_add
[   10.904043] PM: Adding info for No Bus:ptyv0
[   10.912031] device: 'ptyv1': device_add
[   10.915885] PM: Adding info for No Bus:ptyv1
[   10.916050] device: 'ptyv2': device_add
[   10.920024] PM: Adding info for No Bus:ptyv2
[   10.924050] device: 'ptyv3': device_add
[   10.928024] PM: Adding info for No Bus:ptyv3
[   10.932058] device: 'ptyv4': device_add
[   10.936025] PM: Adding info for No Bus:ptyv4
[   10.940051] device: 'ptyv5': device_add
[   10.944024] PM: Adding info for No Bus:ptyv5
[   10.948050] device: 'ptyv6': device_add
[   10.952033] PM: Adding info for No Bus:ptyv6
[   10.956052] device: 'ptyv7': device_add
[   10.960024] PM: Adding info for No Bus:ptyv7
[   10.964050] device: 'ptyv8': device_add
[   10.968024] PM: Adding info for No Bus:ptyv8
[   10.972050] device: 'ptyv9': device_add
[   10.976024] PM: Adding info for No Bus:ptyv9
[   10.980050] device: 'ptyva': device_add
[   10.984025] PM: Adding info for No Bus:ptyva
[   10.988050] device: 'ptyvb': device_add
[   10.992025] PM: Adding info for No Bus:ptyvb
[   10.996050] device: 'ptyvc': device_add
[   11.000034] PM: Adding info for No Bus:ptyvc
[   11.004052] device: 'ptyvd': device_add
[   11.008025] PM: Adding info for No Bus:ptyvd
[   11.012051] device: 'ptyve': device_add
[   11.016025] PM: Adding info for No Bus:ptyve
[   11.020050] device: 'ptyvf': device_add
[   11.024025] PM: Adding info for No Bus:ptyvf
[   11.028050] device: 'ptyw0': device_add
[   11.032025] PM: Adding info for No Bus:ptyw0
[   11.036061] device: 'ptyw1': device_add
[   11.040026] PM: Adding info for No Bus:ptyw1
[   11.044051] device: 'ptyw2': device_add
[   11.048035] PM: Adding info for No Bus:ptyw2
[   11.052062] device: 'ptyw3': device_add
[   11.056027] PM: Adding info for No Bus:ptyw3
[   11.060059] device: 'ptyw4': device_add
[   11.064026] PM: Adding info for No Bus:ptyw4
[   11.068051] device: 'ptyw5': device_add
[   11.072025] PM: Adding info for No Bus:ptyw5
[   11.076050] device: 'ptyw6': device_add
[   11.080026] PM: Adding info for No Bus:ptyw6
[   11.084050] device: 'ptyw7': device_add
[   11.088026] PM: Adding info for No Bus:ptyw7
[   11.092050] device: 'ptyw8': device_add
[   11.096012] PM: Adding info for No Bus:ptyw8
[   11.100051] device: 'ptyw9': device_add
[   11.104036] PM: Adding info for No Bus:ptyw9
[   11.108052] device: 'ptywa': device_add
[   11.112027] PM: Adding info for No Bus:ptywa
[   11.116050] device: 'ptywb': device_add
[   11.120026] PM: Adding info for No Bus:ptywb
[   11.124050] device: 'ptywc': device_add
[   11.128026] PM: Adding info for No Bus:ptywc
[   11.132050] device: 'ptywd': device_add
[   11.136026] PM: Adding info for No Bus:ptywd
[   11.140058] device: 'ptywe': device_add
[   11.144037] PM: Adding info for No Bus:ptywe
[   11.148052] device: 'ptywf': device_add
[   11.152026] PM: Adding info for No Bus:ptywf
[   11.156050] device: 'ptyx0': device_add
[   11.160027] PM: Adding info for No Bus:ptyx0
[   11.164050] device: 'ptyx1': device_add
[   11.168027] PM: Adding info for No Bus:ptyx1
[   11.172050] device: 'ptyx2': device_add
[   11.176046] PM: Adding info for No Bus:ptyx2
[   11.180051] device: 'ptyx3': device_add
[   11.184034] PM: Adding info for No Bus:ptyx3
[   11.188051] device: 'ptyx4': device_add
[   11.192041] PM: Adding info for No Bus:ptyx4
[   11.196052] device: 'ptyx5': device_add
[   11.200038] PM: Adding info for No Bus:ptyx5
[   11.204052] device: 'ptyx6': device_add
[   11.208027] PM: Adding info for No Bus:ptyx6
[   11.212051] device: 'ptyx7': device_add
[   11.216027] PM: Adding info for No Bus:ptyx7
[   11.220050] device: 'ptyx8': device_add
[   11.224027] PM: Adding info for No Bus:ptyx8
[   11.228051] device: 'ptyx9': device_add
[   11.232027] PM: Adding info for No Bus:ptyx9
[   11.236051] device: 'ptyxa': device_add
[   11.240037] PM: Adding info for No Bus:ptyxa
[   11.244059] device: 'ptyxb': device_add
[   11.248029] PM: Adding info for No Bus:ptyxb
[   11.252051] device: 'ptyxc': device_add
[   11.256027] PM: Adding info for No Bus:ptyxc
[   11.264032] device: 'ptyxd': device_add
[   11.267885] PM: Adding info for No Bus:ptyxd
[   11.268051] device: 'ptyxe': device_add
[   11.272027] PM: Adding info for No Bus:ptyxe
[   11.276050] device: 'ptyxf': device_add
[   11.280028] PM: Adding info for No Bus:ptyxf
[   11.284059] device: 'ptyy0': device_add
[   11.288038] PM: Adding info for No Bus:ptyy0
[   11.292052] device: 'ptyy1': device_add
[   11.296028] PM: Adding info for No Bus:ptyy1
[   11.300051] device: 'ptyy2': device_add
[   11.304028] PM: Adding info for No Bus:ptyy2
[   11.308050] device: 'ptyy3': device_add
[   11.312028] PM: Adding info for No Bus:ptyy3
[   11.316050] device: 'ptyy4': device_add
[   11.320028] PM: Adding info for No Bus:ptyy4
[   11.324050] device: 'ptyy5': device_add
[   11.328028] PM: Adding info for No Bus:ptyy5
[   11.332050] device: 'ptyy6': device_add
[   11.336037] PM: Adding info for No Bus:ptyy6
[   11.340052] device: 'ptyy7': device_add
[   11.344039] PM: Adding info for No Bus:ptyy7
[   11.348059] device: 'ptyy8': device_add
[   11.352031] PM: Adding info for No Bus:ptyy8
[   11.356051] device: 'ptyy9': device_add
[   11.360028] PM: Adding info for No Bus:ptyy9
[   11.364050] device: 'ptyya': device_add
[   11.368028] PM: Adding info for No Bus:ptyya
[   11.372050] device: 'ptyyb': device_add
[   11.376028] PM: Adding info for No Bus:ptyyb
[   11.380050] device: 'ptyyc': device_add
[   11.384038] PM: Adding info for No Bus:ptyyc
[   11.388052] device: 'ptyyd': device_add
[   11.392029] PM: Adding info for No Bus:ptyyd
[   11.396050] device: 'ptyye': device_add
[   11.400029] PM: Adding info for No Bus:ptyye
[   11.404050] device: 'ptyyf': device_add
[   11.408029] PM: Adding info for No Bus:ptyyf
[   11.412050] device: 'ptyz0': device_add
[   11.416029] PM: Adding info for No Bus:ptyz0
[   11.420050] device: 'ptyz1': device_add
[   11.424029] PM: Adding info for No Bus:ptyz1
[   11.428050] device: 'ptyz2': device_add
[   11.432039] PM: Adding info for No Bus:ptyz2
[   11.436052] device: 'ptyz3': device_add
[   11.439915] PM: Adding info for No Bus:ptyz3
[   11.440050] device: 'ptyz4': device_add
[   11.444029] PM: Adding info for No Bus:ptyz4
[   11.448058] device: 'ptyz5': device_add
[   11.452030] PM: Adding info for No Bus:ptyz5
[   11.456051] device: 'ptyz6': device_add
[   11.460029] PM: Adding info for No Bus:ptyz6
[   11.464050] device: 'ptyz7': device_add
[   11.468029] PM: Adding info for No Bus:ptyz7
[   11.472050] device: 'ptyz8': device_add
[   11.476039] PM: Adding info for No Bus:ptyz8
[   11.480052] device: 'ptyz9': device_add
[   11.484040] PM: Adding info for No Bus:ptyz9
[   11.488052] device: 'ptyza': device_add
[   11.492030] PM: Adding info for No Bus:ptyza
[   11.496050] device: 'ptyzb': device_add
[   11.500029] PM: Adding info for No Bus:ptyzb
[   11.504059] device: 'ptyzc': device_add
[   11.508031] PM: Adding info for No Bus:ptyzc
[   11.512051] device: 'ptyzd': device_add
[   11.516029] PM: Adding info for No Bus:ptyzd
[   11.520050] device: 'ptyze': device_add
[   11.524040] PM: Adding info for No Bus:ptyze
[   11.528052] device: 'ptyzf': device_add
[   11.532030] PM: Adding info for No Bus:ptyzf
[   11.536050] device: 'ptya0': device_add
[   11.540030] PM: Adding info for No Bus:ptya0
[   11.544050] device: 'ptya1': device_add
[   11.548030] PM: Adding info for No Bus:ptya1
[   11.552058] device: 'ptya2': device_add
[   11.556032] PM: Adding info for No Bus:ptya2
[   11.560051] device: 'ptya3': device_add
[   11.564030] PM: Adding info for No Bus:ptya3
[   11.568051] device: 'ptya4': device_add
[   11.572040] PM: Adding info for No Bus:ptya4
[   11.576052] device: 'ptya5': device_add
[   11.580030] PM: Adding info for No Bus:ptya5
[   11.584051] device: 'ptya6': device_add
[   11.588030] PM: Adding info for No Bus:ptya6
[   11.592051] device: 'ptya7': device_add
[   11.596030] PM: Adding info for No Bus:ptya7
[   11.600050] device: 'ptya8': device_add
[   11.604030] PM: Adding info for No Bus:ptya8
[   11.608051] device: 'ptya9': device_add
[   11.612041] PM: Adding info for No Bus:ptya9
[   11.616052] device: 'ptyaa': device_add
[   11.620041] PM: Adding info for No Bus:ptyaa
[   11.624052] device: 'ptyab': device_add
[   11.628031] PM: Adding info for No Bus:ptyab
[   11.632061] device: 'ptyac': device_add
[   11.636032] PM: Adding info for No Bus:ptyac
[   11.640051] device: 'ptyad': device_add
[   11.644031] PM: Adding info for No Bus:ptyad
[   11.648051] device: 'ptyae': device_add
[   11.652031] PM: Adding info for No Bus:ptyae
[   11.656058] device: 'ptyaf': device_add
[   11.660033] PM: Adding info for No Bus:ptyaf
[   11.664051] device: 'ptyb0': device_add
[   11.668041] PM: Adding info for No Bus:ptyb0
[   11.672052] device: 'ptyb1': device_add
[   11.676031] PM: Adding info for No Bus:ptyb1
[   11.680051] device: 'ptyb2': device_add
[   11.684032] PM: Adding info for No Bus:ptyb2
[   11.688051] device: 'ptyb3': device_add
[   11.692031] PM: Adding info for No Bus:ptyb3
[   11.696051] device: 'ptyb4': device_add
[   11.700031] PM: Adding info for No Bus:ptyb4
[   11.704051] device: 'ptyb5': device_add
[   11.708031] PM: Adding info for No Bus:ptyb5
[   11.712051] device: 'ptyb6': device_add
[   11.716044] PM: Adding info for No Bus:ptyb6
[   11.720052] device: 'ptyb7': device_add
[   11.724032] PM: Adding info for No Bus:ptyb7
[   11.728059] device: 'ptyb8': device_add
[   11.732033] PM: Adding info for No Bus:ptyb8
[   11.736051] device: 'ptyb9': device_add
[   11.740031] PM: Adding info for No Bus:ptyb9
[   11.744051] device: 'ptyba': device_add
[   11.748032] PM: Adding info for No Bus:ptyba
[   11.752051] device: 'ptybb': device_add
[   11.756031] PM: Adding info for No Bus:ptybb
[   11.760058] device: 'ptybc': device_add
[   11.764043] PM: Adding info for No Bus:ptybc
[   11.768052] device: 'ptybd': device_add
[   11.772032] PM: Adding info for No Bus:ptybd
[   11.776050] device: 'ptybe': device_add
[   11.779920] PM: Adding info for No Bus:ptybe
[   11.780052] device: 'ptybf': device_add
[   11.784032] PM: Adding info for No Bus:ptybf
[   11.788050] device: 'ptyc0': device_add
[   11.792032] PM: Adding info for No Bus:ptyc0
[   11.796050] device: 'ptyc1': device_add
[   11.800032] PM: Adding info for No Bus:ptyc1
[   11.804050] device: 'ptyc2': device_add
[   11.808042] PM: Adding info for No Bus:ptyc2
[   11.812052] device: 'ptyc3': device_add
[   11.816040] PM: Adding info for No Bus:ptyc3
[   11.820051] device: 'ptyc4': device_add
[   11.824032] PM: Adding info for No Bus:ptyc4
[   11.828051] device: 'ptyc5': device_add
[   11.832032] PM: Adding info for No Bus:ptyc5
[   11.836050] device: 'ptyc6': device_add
[   11.840032] PM: Adding info for No Bus:ptyc6
[   11.844051] device: 'ptyc7': device_add
[   11.848032] PM: Adding info for No Bus:ptyc7
[   11.852051] device: 'ptyc8': device_add
[   11.856043] PM: Adding info for No Bus:ptyc8
[   11.860060] device: 'ptyc9': device_add
[   11.864036] PM: Adding info for No Bus:ptyc9
[   11.868051] device: 'ptyca': device_add
[   11.872033] PM: Adding info for No Bus:ptyca
[   11.876051] device: 'ptycb': device_add
[   11.880033] PM: Adding info for No Bus:ptycb
[   11.884051] device: 'ptycc': device_add
[   11.888033] PM: Adding info for No Bus:ptycc
[   11.892051] device: 'ptycd': device_add
[   11.896033] PM: Adding info for No Bus:ptycd
[   11.900051] device: 'ptyce': device_add
[   11.904043] PM: Adding info for No Bus:ptyce
[   11.908052] device: 'ptycf': device_add
[   11.912033] PM: Adding info for No Bus:ptycf
[   11.916051] device: 'ptyd0': device_add
[   11.920045] PM: Adding info for No Bus:ptyd0
[   11.924052] device: 'ptyd1': device_add
[   11.928033] PM: Adding info for No Bus:ptyd1
[   11.932051] device: 'ptyd2': device_add
[   11.936034] PM: Adding info for No Bus:ptyd2
[   11.944006] device: 'ptyd3': device_add
[   11.947871] PM: Adding info for No Bus:ptyd3
[   11.948059] device: 'ptyd4': device_add
[   11.952045] PM: Adding info for No Bus:ptyd4
[   11.956052] device: 'ptyd5': device_add
[   11.960034] PM: Adding info for No Bus:ptyd5
[   11.964058] device: 'ptyd6': device_add
[   11.968035] PM: Adding info for No Bus:ptyd6
[   11.972051] device: 'ptyd7': device_add
[   11.976034] PM: Adding info for No Bus:ptyd7
[   11.980051] device: 'ptyd8': device_add
[   11.984034] PM: Adding info for No Bus:ptyd8
[   11.988051] device: 'ptyd9': device_add
[   11.992034] PM: Adding info for No Bus:ptyd9
[   11.996051] device: 'ptyda': device_add
[   12.000044] PM: Adding info for No Bus:ptyda
[   12.004052] device: 'ptydb': device_add
[   12.008035] PM: Adding info for No Bus:ptydb
[   12.012051] device: 'ptydc': device_add
[   12.016034] PM: Adding info for No Bus:ptydc
[   12.020051] device: 'ptydd': device_add
[   12.024034] PM: Adding info for No Bus:ptydd
[   12.028051] device: 'ptyde': device_add
[   12.032034] PM: Adding info for No Bus:ptyde
[   12.036051] device: 'ptydf': device_add
[   12.040034] PM: Adding info for No Bus:ptydf
[   12.044051] device: 'ptye0': device_add
[   12.048045] PM: Adding info for No Bus:ptye0
[   12.052052] device: 'ptye1': device_add
[   12.056035] PM: Adding info for No Bus:ptye1
[   12.060051] device: 'ptye2': device_add
[   12.064046] PM: Adding info for No Bus:ptye2
[   12.068059] device: 'ptye3': device_add
[   12.072036] PM: Adding info for No Bus:ptye3
[   12.076051] device: 'ptye4': device_add
[   12.080035] PM: Adding info for No Bus:ptye4
[   12.084051] device: 'ptye5': device_add
[   12.088035] PM: Adding info for No Bus:ptye5
[   12.092051] device: 'ptye6': device_add
[   12.096045] PM: Adding info for No Bus:ptye6
[   12.100052] device: 'ptye7': device_add
[   12.104035] PM: Adding info for No Bus:ptye7
[   12.112032] device: 'ptye8': device_add
[   12.115900] PM: Adding info for No Bus:ptye8
[   12.116051] device: 'ptye9': device_add
[   12.120047] PM: Adding info for No Bus:ptye9
[   12.124052] device: 'ptyea': device_add
[   12.128037] PM: Adding info for No Bus:ptyea
[   12.132051] device: 'ptyeb': device_add
[   12.136035] PM: Adding info for No Bus:ptyeb
[   12.140051] device: 'ptyec': device_add
[   12.144046] PM: Adding info for No Bus:ptyec
[   12.148052] device: 'ptyed': device_add
[   12.152036] PM: Adding info for No Bus:ptyed
[   12.156051] device: 'ptyee': device_add
[   12.160036] PM: Adding info for No Bus:ptyee
[   12.164051] device: 'ptyef': device_add
[   12.168036] PM: Adding info for No Bus:ptyef
[   12.172080] device: 'ttyp0': device_add
[   12.176033] PM: Adding info for No Bus:ttyp0
[   12.180051] device: 'ttyp1': device_add
[   12.184032] PM: Adding info for No Bus:ttyp1
[   12.188051] device: 'ttyp2': device_add
[   12.192043] PM: Adding info for No Bus:ttyp2
[   12.196052] device: 'ttyp3': device_add
[   12.200032] PM: Adding info for No Bus:ttyp3
[   12.204051] device: 'ttyp4': device_add
[   12.208032] PM: Adding info for No Bus:ttyp4
[   12.212061] device: 'ttyp5': device_add
[   12.216034] PM: Adding info for No Bus:ttyp5
[   12.220051] device: 'ttyp6': device_add
[   12.224032] PM: Adding info for No Bus:ttyp6
[   12.228051] device: 'ttyp7': device_add
[   12.232032] PM: Adding info for No Bus:ttyp7
[   12.236051] device: 'ttyp8': device_add
[   12.240042] PM: Adding info for No Bus:ttyp8
[   12.244052] device: 'ttyp9': device_add
[   12.248032] PM: Adding info for No Bus:ttyp9
[   12.252051] device: 'ttypa': device_add
[   12.256032] PM: Adding info for No Bus:ttypa
[   12.260051] device: 'ttypb': device_add
[   12.264032] PM: Adding info for No Bus:ttypb
[   12.268051] device: 'ttypc': device_add
[   12.272032] PM: Adding info for No Bus:ttypc
[   12.280040] device: 'ttypd': device_add
[   12.283900] PM: Adding info for No Bus:ttypd
[   12.284052] device: 'ttype': device_add
[   12.288043] PM: Adding info for No Bus:ttype
[   12.292052] device: 'ttypf': device_add
[   12.296033] PM: Adding info for No Bus:ttypf
[   12.300051] device: 'ttyq0': device_add
[   12.304054] PM: Adding info for No Bus:ttyq0
[   12.308051] device: 'ttyq1': device_add
[   12.312040] PM: Adding info for No Bus:ttyq1
[   12.316051] device: 'ttyq2': device_add
[   12.320036] PM: Adding info for No Bus:ttyq2
[   12.324051] device: 'ttyq3': device_add
[   12.328033] PM: Adding info for No Bus:ttyq3
[   12.332051] device: 'ttyq4': device_add
[   12.336044] PM: Adding info for No Bus:ttyq4
[   12.340052] device: 'ttyq5': device_add
[   12.344033] PM: Adding info for No Bus:ttyq5
[   12.348051] device: 'ttyq6': device_add
[   12.352033] PM: Adding info for No Bus:ttyq6
[   12.356051] device: 'ttyq7': device_add
[   12.360045] PM: Adding info for No Bus:ttyq7
[   12.364052] device: 'ttyq8': device_add
[   12.368033] PM: Adding info for No Bus:ttyq8
[   12.372051] device: 'ttyq9': device_add
[   12.376034] PM: Adding info for No Bus:ttyq9
[   12.380058] device: 'ttyqa': device_add
[   12.384045] PM: Adding info for No Bus:ttyqa
[   12.388064] device: 'ttyqb': device_add
[   12.392035] PM: Adding info for No Bus:ttyqb
[   12.396051] device: 'ttyqc': device_add
[   12.400034] PM: Adding info for No Bus:ttyqc
[   12.404051] device: 'ttyqd': device_add
[   12.408033] PM: Adding info for No Bus:ttyqd
[   12.412051] device: 'ttyqe': device_add
[   12.416034] PM: Adding info for No Bus:ttyqe
[   12.420051] device: 'ttyqf': device_add
[   12.424034] PM: Adding info for No Bus:ttyqf
[   12.428051] device: 'ttyr0': device_add
[   12.432044] PM: Adding info for No Bus:ttyr0
[   12.436052] device: 'ttyr1': device_add
[   12.440034] PM: Adding info for No Bus:ttyr1
[   12.444051] device: 'ttyr2': device_add
[   12.447910] PM: Adding info for No Bus:ttyr2
[   12.448051] device: 'ttyr3': device_add
[   12.452034] PM: Adding info for No Bus:ttyr3
[   12.456051] device: 'ttyr4': device_add
[   12.460034] PM: Adding info for No Bus:ttyr4
[   12.464051] device: 'ttyr5': device_add
[   12.468034] PM: Adding info for No Bus:ttyr5
[   12.472051] device: 'ttyr6': device_add
[   12.476044] PM: Adding info for No Bus:ttyr6
[   12.480060] device: 'ttyr7': device_add
[   12.484036] PM: Adding info for No Bus:ttyr7
[   12.488051] device: 'ttyr8': device_add
[   12.492034] PM: Adding info for No Bus:ttyr8
[   12.496051] device: 'ttyr9': device_add
[   12.500046] PM: Adding info for No Bus:ttyr9
[   12.504052] device: 'ttyra': device_add
[   12.508036] PM: Adding info for No Bus:ttyra
[   12.512051] device: 'ttyrb': device_add
[   12.516035] PM: Adding info for No Bus:ttyrb
[   12.520051] device: 'ttyrc': device_add
[   12.524045] PM: Adding info for No Bus:ttyrc
[   12.528052] device: 'ttyrd': device_add
[   12.532036] PM: Adding info for No Bus:ttyrd
[   12.536051] device: 'ttyre': device_add
[   12.540035] PM: Adding info for No Bus:ttyre
[   12.544051] device: 'ttyrf': device_add
[   12.548035] PM: Adding info for No Bus:ttyrf
[   12.552051] device: 'ttys0': device_add
[   12.556035] PM: Adding info for No Bus:ttys0
[   12.560051] device: 'ttys1': device_add
[   12.564035] PM: Adding info for No Bus:ttys1
[   12.568051] device: 'ttys2': device_add
[   12.572046] PM: Adding info for No Bus:ttys2
[   12.576052] device: 'ttys3': device_add
[   12.580036] PM: Adding info for No Bus:ttys3
[   12.584059] device: 'ttys4': device_add
[   12.588038] PM: Adding info for No Bus:ttys4
[   12.592052] device: 'ttys5': device_add
[   12.596035] PM: Adding info for No Bus:ttys5
[   12.600051] device: 'ttys6': device_add
[   12.604035] PM: Adding info for No Bus:ttys6
[   12.608059] device: 'ttys7': device_add
[   12.611922] PM: Adding info for No Bus:ttys7
[   12.612052] device: 'ttys8': device_add
[   12.616046] PM: Adding info for No Bus:ttys8
[   12.620052] device: 'ttys9': device_add
[   12.624046] PM: Adding info for No Bus:ttys9
[   12.628052] device: 'ttysa': device_add
[   12.632038] PM: Adding info for No Bus:ttysa
[   12.636051] device: 'ttysb': device_add
[   12.640047] PM: Adding info for No Bus:ttysb
[   12.644052] device: 'ttysc': device_add
[   12.648037] PM: Adding info for No Bus:ttysc
[   12.652051] device: 'ttysd': device_add
[   12.656036] PM: Adding info for No Bus:ttysd
[   12.660051] device: 'ttyse': device_add
[   12.664047] PM: Adding info for No Bus:ttyse
[   12.668052] device: 'ttysf': device_add
[   12.672037] PM: Adding info for No Bus:ttysf
[   12.676051] device: 'ttyt0': device_add
[   12.680037] PM: Adding info for No Bus:ttyt0
[   12.684059] device: 'ttyt1': device_add
[   12.688038] PM: Adding info for No Bus:ttyt1
[   12.692051] device: 'ttyt2': device_add
[   12.696036] PM: Adding info for No Bus:ttyt2
[   12.700051] device: 'ttyt3': device_add
[   12.704037] PM: Adding info for No Bus:ttyt3
[   12.708051] device: 'ttyt4': device_add
[   12.712047] PM: Adding info for No Bus:ttyt4
[   12.716052] device: 'ttyt5': device_add
[   12.720037] PM: Adding info for No Bus:ttyt5
[   12.724051] device: 'ttyt6': device_add
[   12.728037] PM: Adding info for No Bus:ttyt6
[   12.732051] device: 'ttyt7': device_add
[   12.736036] PM: Adding info for No Bus:ttyt7
[   12.740051] device: 'ttyt8': device_add
[   12.744037] PM: Adding info for No Bus:ttyt8
[   12.748051] device: 'ttyt9': device_add
[   12.752037] PM: Adding info for No Bus:ttyt9
[   12.756051] device: 'ttyta': device_add
[   12.760048] PM: Adding info for No Bus:ttyta
[   12.764052] device: 'ttytb': device_add
[   12.768038] PM: Adding info for No Bus:ttytb
[   12.772051] device: 'ttytc': device_add
[   12.776033] PM: Adding info for No Bus:ttytc
[   12.780051] device: 'ttytd': device_add
[   12.784037] PM: Adding info for No Bus:ttytd
[   12.788069] device: 'ttyte': device_add
[   12.792040] PM: Adding info for No Bus:ttyte
[   12.796051] device: 'ttytf': device_add
[   12.800037] PM: Adding info for No Bus:ttytf
[   12.804051] device: 'ttyu0': device_add
[   12.808049] PM: Adding info for No Bus:ttyu0
[   12.812052] device: 'ttyu1': device_add
[   12.816047] PM: Adding info for No Bus:ttyu1
[   12.820051] device: 'ttyu2': device_add
[   12.824038] PM: Adding info for No Bus:ttyu2
[   12.828059] device: 'ttyu3': device_add
[   12.832039] PM: Adding info for No Bus:ttyu3
[   12.836051] device: 'ttyu4': device_add
[   12.840038] PM: Adding info for No Bus:ttyu4
[   12.844051] device: 'ttyu5': device_add
[   12.848038] PM: Adding info for No Bus:ttyu5
[   12.852051] device: 'ttyu6': device_add
[   12.856050] PM: Adding info for No Bus:ttyu6
[   12.860052] device: 'ttyu7': device_add
[   12.864040] PM: Adding info for No Bus:ttyu7
[   12.868051] device: 'ttyu8': device_add
[   12.872040] PM: Adding info for No Bus:ttyu8
[   12.876051] device: 'ttyu9': device_add
[   12.880039] PM: Adding info for No Bus:ttyu9
[   12.884051] device: 'ttyua': device_add
[   12.888041] PM: Adding info for No Bus:ttyua
[   12.892059] device: 'ttyub': device_add
[   12.896041] PM: Adding info for No Bus:ttyub
[   12.900052] device: 'ttyuc': device_add
[   12.904050] PM: Adding info for No Bus:ttyuc
[   12.908052] device: 'ttyud': device_add
[   12.912041] PM: Adding info for No Bus:ttyud
[   12.916051] device: 'ttyue': device_add
[   12.920040] PM: Adding info for No Bus:ttyue
[   12.924051] device: 'ttyuf': device_add
[   12.928040] PM: Adding info for No Bus:ttyuf
[   12.932051] device: 'ttyv0': device_add
[   12.935932] PM: Adding info for No Bus:ttyv0
[   12.936053] device: 'ttyv1': device_add
[   12.940041] PM: Adding info for No Bus:ttyv1
[   12.944051] device: 'ttyv2': device_add
[   12.948051] PM: Adding info for No Bus:ttyv2
[   12.952052] device: 'ttyv3': device_add
[   12.956041] PM: Adding info for No Bus:ttyv3
[   12.960051] device: 'ttyv4': device_add
[   12.964041] PM: Adding info for No Bus:ttyv4
[   12.968051] device: 'ttyv5': device_add
[   12.972041] PM: Adding info for No Bus:ttyv5
[   12.976051] device: 'ttyv6': device_add
[   12.980041] PM: Adding info for No Bus:ttyv6
[   12.984051] device: 'ttyv7': device_add
[   12.988041] PM: Adding info for No Bus:ttyv7
[   12.992059] device: 'ttyv8': device_add
[   12.996054] PM: Adding info for No Bus:ttyv8
[   13.000053] device: 'ttyv9': device_add
[   13.004042] PM: Adding info for No Bus:ttyv9
[   13.008051] device: 'ttyva': device_add
[   13.012042] PM: Adding info for No Bus:ttyva
[   13.016051] device: 'ttyvb': device_add
[   13.020042] PM: Adding info for No Bus:ttyvb
[   13.024051] device: 'ttyvc': device_add
[   13.028042] PM: Adding info for No Bus:ttyvc
[   13.032051] device: 'ttyvd': device_add
[   13.036042] PM: Adding info for No Bus:ttyvd
[   13.040051] device: 'ttyve': device_add
[   13.044053] PM: Adding info for No Bus:ttyve
[   13.048061] device: 'ttyvf': device_add
[   13.052044] PM: Adding info for No Bus:ttyvf
[   13.056052] device: 'ttyw0': device_add
[   13.060042] PM: Adding info for No Bus:ttyw0
[   13.064051] device: 'ttyw1': device_add
[   13.068042] PM: Adding info for No Bus:ttyw1
[   13.072051] device: 'ttyw2': device_add
[   13.076054] PM: Adding info for No Bus:ttyw2
[   13.080052] device: 'ttyw3': device_add
[   13.084042] PM: Adding info for No Bus:ttyw3
[   13.092006] device: 'ttyw4': device_add
[   13.095891] PM: Adding info for No Bus:ttyw4
[   13.096062] device: 'ttyw5': device_add
[   13.100045] PM: Adding info for No Bus:ttyw5
[   13.104052] device: 'ttyw6': device_add
[   13.108042] PM: Adding info for No Bus:ttyw6
[   13.112051] device: 'ttyw7': device_add
[   13.116042] PM: Adding info for No Bus:ttyw7
[   13.120051] device: 'ttyw8': device_add
[   13.124043] PM: Adding info for No Bus:ttyw8
[   13.128051] device: 'ttyw9': device_add
[   13.132053] PM: Adding info for No Bus:ttyw9
[   13.136052] device: 'ttywa': device_add
[   13.140054] PM: Adding info for No Bus:ttywa
[   13.144053] device: 'ttywb': device_add
[   13.148043] PM: Adding info for No Bus:ttywb
[   13.152051] device: 'ttywc': device_add
[   13.156043] PM: Adding info for No Bus:ttywc
[   13.160051] device: 'ttywd': device_add
[   13.164043] PM: Adding info for No Bus:ttywd
[   13.168051] device: 'ttywe': device_add
[   13.172043] PM: Adding info for No Bus:ttywe
[   13.176051] device: 'ttywf': device_add
[   13.180044] PM: Adding info for No Bus:ttywf
[   13.184051] device: 'ttyx0': device_add
[   13.188054] PM: Adding info for No Bus:ttyx0
[   13.192053] device: 'ttyx1': device_add
[   13.196044] PM: Adding info for No Bus:ttyx1
[   13.200059] device: 'ttyx2': device_add
[   13.204045] PM: Adding info for No Bus:ttyx2
[   13.208052] device: 'ttyx3': device_add
[   13.212043] PM: Adding info for No Bus:ttyx3
[   13.216051] device: 'ttyx4': device_add
[   13.220055] PM: Adding info for No Bus:ttyx4
[   13.224053] device: 'ttyx5': device_add
[   13.228046] PM: Adding info for No Bus:ttyx5
[   13.232051] device: 'ttyx6': device_add
[   13.236055] PM: Adding info for No Bus:ttyx6
[   13.240053] device: 'ttyx7': device_add
[   13.244044] PM: Adding info for No Bus:ttyx7
[   13.248052] device: 'ttyx8': device_add
[   13.251921] PM: Adding info for No Bus:ttyx8
[   13.252051] device: 'ttyx9': device_add
[   13.256044] PM: Adding info for No Bus:ttyx9
[   13.260051] device: 'ttyxa': device_add
[   13.264045] PM: Adding info for No Bus:ttyxa
[   13.268059] device: 'ttyxb': device_add
[   13.272046] PM: Adding info for No Bus:ttyxb
[   13.276052] device: 'ttyxc': device_add
[   13.280055] PM: Adding info for No Bus:ttyxc
[   13.284053] device: 'ttyxd': device_add
[   13.288045] PM: Adding info for No Bus:ttyxd
[   13.292051] device: 'ttyxe': device_add
[   13.296045] PM: Adding info for No Bus:ttyxe
[   13.300059] device: 'ttyxf': device_add
[   13.304046] PM: Adding info for No Bus:ttyxf
[   13.308052] device: 'ttyy0': device_add
[   13.312045] PM: Adding info for No Bus:ttyy0
[   13.316051] device: 'ttyy1': device_add
[   13.320045] PM: Adding info for No Bus:ttyy1
[   13.324051] device: 'ttyy2': device_add
[   13.328056] PM: Adding info for No Bus:ttyy2
[   13.332053] device: 'ttyy3': device_add
[   13.336045] PM: Adding info for No Bus:ttyy3
[   13.340051] device: 'ttyy4': device_add
[   13.344046] PM: Adding info for No Bus:ttyy4
[   13.348051] device: 'ttyy5': device_add
[   13.352045] PM: Adding info for No Bus:ttyy5
[   13.356051] device: 'ttyy6': device_add
[   13.360046] PM: Adding info for No Bus:ttyy6
[   13.364062] device: 'ttyy7': device_add
[   13.368048] PM: Adding info for No Bus:ttyy7
[   13.372053] device: 'ttyy8': device_add
[   13.376057] PM: Adding info for No Bus:ttyy8
[   13.380053] device: 'ttyy9': device_add
[   13.384046] PM: Adding info for No Bus:ttyy9
[   13.388051] device: 'ttyya': device_add
[   13.392046] PM: Adding info for No Bus:ttyya
[   13.396051] device: 'ttyyb': device_add
[   13.400047] PM: Adding info for No Bus:ttyyb
[   13.404060] device: 'ttyyc': device_add
[   13.408049] PM: Adding info for No Bus:ttyyc
[   13.412052] device: 'ttyyd': device_add
[   13.416046] PM: Adding info for No Bus:ttyyd
[   13.420052] device: 'ttyye': device_add
[   13.424081] PM: Adding info for No Bus:ttyye
[   13.428053] device: 'ttyyf': device_add
[   13.432055] PM: Adding info for No Bus:ttyyf
[   13.436051] device: 'ttyz0': device_add
[   13.440047] PM: Adding info for No Bus:ttyz0
[   13.444051] device: 'ttyz1': device_add
[   13.448047] PM: Adding info for No Bus:ttyz1
[   13.452051] device: 'ttyz2': device_add
[   13.456046] PM: Adding info for No Bus:ttyz2
[   13.460051] device: 'ttyz3': device_add
[   13.464047] PM: Adding info for No Bus:ttyz3
[   13.468051] device: 'ttyz4': device_add
[   13.472057] PM: Adding info for No Bus:ttyz4
[   13.476052] device: 'ttyz5': device_add
[   13.480047] PM: Adding info for No Bus:ttyz5
[   13.484051] device: 'ttyz6': device_add
[   13.488047] PM: Adding info for No Bus:ttyz6
[   13.492060] device: 'ttyz7': device_add
[   13.496050] PM: Adding info for No Bus:ttyz7
[   13.500052] device: 'ttyz8': device_add
[   13.504047] PM: Adding info for No Bus:ttyz8
[   13.508060] device: 'ttyz9': device_add
[   13.512060] PM: Adding info for No Bus:ttyz9
[   13.516053] device: 'ttyza': device_add
[   13.520059] PM: Adding info for No Bus:ttyza
[   13.524053] device: 'ttyzb': device_add
[   13.528048] PM: Adding info for No Bus:ttyzb
[   13.532051] device: 'ttyzc': device_add
[   13.536048] PM: Adding info for No Bus:ttyzc
[   13.540052] device: 'ttyzd': device_add
[   13.544047] PM: Adding info for No Bus:ttyzd
[   13.548051] device: 'ttyze': device_add
[   13.552046] PM: Adding info for No Bus:ttyze
[   13.556051] device: 'ttyzf': device_add
[   13.559924] PM: Adding info for No Bus:ttyzf
[   13.560051] device: 'ttya0': device_add
[   13.564059] PM: Adding info for No Bus:ttya0
[   13.568053] device: 'ttya1': device_add
[   13.572048] PM: Adding info for No Bus:ttya1
[   13.576052] device: 'ttya2': device_add
[   13.580049] PM: Adding info for No Bus:ttya2
[   13.584052] device: 'ttya3': device_add
[   13.588049] PM: Adding info for No Bus:ttya3
[   13.592052] device: 'ttya4': device_add
[   13.596049] PM: Adding info for No Bus:ttya4
[   13.600051] device: 'ttya5': device_add
[   13.604049] PM: Adding info for No Bus:ttya5
[   13.608059] device: 'ttya6': device_add
[   13.612061] PM: Adding info for No Bus:ttya6
[   13.616053] device: 'ttya7': device_add
[   13.620049] PM: Adding info for No Bus:ttya7
[   13.624052] device: 'ttya8': device_add
[   13.628048] PM: Adding info for No Bus:ttya8
[   13.632052] device: 'ttya9': device_add
[   13.636060] PM: Adding info for No Bus:ttya9
[   13.640053] device: 'ttyaa': device_add
[   13.644050] PM: Adding info for No Bus:ttyaa
[   13.648052] device: 'ttyab': device_add
[   13.652061] PM: Adding info for No Bus:ttyab
[   13.656055] device: 'ttyac': device_add
[   13.660061] PM: Adding info for No Bus:ttyac
[   13.664053] device: 'ttyad': device_add
[   13.668049] PM: Adding info for No Bus:ttyad
[   13.672052] device: 'ttyae': device_add
[   13.676050] PM: Adding info for No Bus:ttyae
[   13.680052] device: 'ttyaf': device_add
[   13.684050] PM: Adding info for No Bus:ttyaf
[   13.688051] device: 'ttyb0': device_add
[   13.692049] PM: Adding info for No Bus:ttyb0
[   13.696052] device: 'ttyb1': device_add
[   13.700050] PM: Adding info for No Bus:ttyb1
[   13.704052] device: 'ttyb2': device_add
[   13.707937] PM: Adding info for No Bus:ttyb2
[   13.708069] device: 'ttyb3': device_add
[   13.712052] PM: Adding info for No Bus:ttyb3
[   13.716053] device: 'ttyb4': device_add
[   13.720049] PM: Adding info for No Bus:ttyb4
[   13.724052] device: 'ttyb5': device_add
[   13.728049] PM: Adding info for No Bus:ttyb5
[   13.732052] device: 'ttyb6': device_add
[   13.736050] PM: Adding info for No Bus:ttyb6
[   13.740052] device: 'ttyb7': device_add
[   13.744049] PM: Adding info for No Bus:ttyb7
[   13.748052] device: 'ttyb8': device_add
[   13.752060] PM: Adding info for No Bus:ttyb8
[   13.756053] device: 'ttyb9': device_add
[   13.760050] PM: Adding info for No Bus:ttyb9
[   13.764052] device: 'ttyba': device_add
[   13.768050] PM: Adding info for No Bus:ttyba
[   13.772052] device: 'ttybb': device_add
[   13.776050] PM: Adding info for No Bus:ttybb
[   13.780052] device: 'ttybc': device_add
[   13.784050] PM: Adding info for No Bus:ttybc
[   13.788052] device: 'ttybd': device_add
[   13.792062] PM: Adding info for No Bus:ttybd
[   13.796053] device: 'ttybe': device_add
[   13.800067] PM: Adding info for No Bus:ttybe
[   13.804054] device: 'ttybf': device_add
[   13.808052] PM: Adding info for No Bus:ttybf
[   13.812060] device: 'ttyc0': device_add
[   13.816066] PM: Adding info for No Bus:ttyc0
[   13.820054] device: 'ttyc1': device_add
[   13.824052] PM: Adding info for No Bus:ttyc1
[   13.828052] device: 'ttyc2': device_add
[   13.832052] PM: Adding info for No Bus:ttyc2
[   13.836053] device: 'ttyc3': device_add
[   13.840051] PM: Adding info for No Bus:ttyc3
[   13.844052] device: 'ttyc4': device_add
[   13.848062] PM: Adding info for No Bus:ttyc4
[   13.852053] device: 'ttyc5': device_add
[   13.856025] PM: Adding info for No Bus:ttyc5
[   13.860052] device: 'ttyc6': device_add
[   13.864052] PM: Adding info for No Bus:ttyc6
[   13.868052] device: 'ttyc7': device_add
[   13.872052] PM: Adding info for No Bus:ttyc7
[   13.876052] device: 'ttyc8': device_add
[   13.880051] PM: Adding info for No Bus:ttyc8
[   13.884052] device: 'ttyc9': device_add
[   13.888051] PM: Adding info for No Bus:ttyc9
[   13.892052] device: 'ttyca': device_add
[   13.896063] PM: Adding info for No Bus:ttyca
[   13.900053] device: 'ttycb': device_add
[   13.904053] PM: Adding info for No Bus:ttycb
[   13.908052] device: 'ttycc': device_add
[   13.912054] PM: Adding info for No Bus:ttycc
[   13.916060] device: 'ttycd': device_add
[   13.920055] PM: Adding info for No Bus:ttycd
[   13.924052] device: 'ttyce': device_add
[   13.928053] PM: Adding info for No Bus:ttyce
[   13.932061] device: 'ttycf': device_add
[   13.936054] PM: Adding info for No Bus:ttycf
[   13.940063] device: 'ttyd0': device_add
[   13.944067] PM: Adding info for No Bus:ttyd0
[   13.948053] device: 'ttyd1': device_add
[   13.952053] PM: Adding info for No Bus:ttyd1
[   13.956052] device: 'ttyd2': device_add
[   13.960052] PM: Adding info for No Bus:ttyd2
[   13.964052] device: 'ttyd3': device_add
[   13.968053] PM: Adding info for No Bus:ttyd3
[   13.972052] device: 'ttyd4': device_add
[   13.976053] PM: Adding info for No Bus:ttyd4
[   13.980052] device: 'ttyd5': device_add
[   13.984053] PM: Adding info for No Bus:ttyd5
[   13.988052] device: 'ttyd6': device_add
[   13.992064] PM: Adding info for No Bus:ttyd6
[   14.000034] device: 'ttyd7': device_add
[   14.003918] PM: Adding info for No Bus:ttyd7
[   14.004053] device: 'ttyd8': device_add
[   14.008055] PM: Adding info for No Bus:ttyd8
[   14.012053] device: 'ttyd9': device_add
[   14.016054] PM: Adding info for No Bus:ttyd9
[   14.020060] device: 'ttyda': device_add
[   14.024057] PM: Adding info for No Bus:ttyda
[   14.028053] device: 'ttydb': device_add
[   14.032054] PM: Adding info for No Bus:ttydb
[   14.036053] device: 'ttydc': device_add
[   14.040066] PM: Adding info for No Bus:ttydc
[   14.044054] device: 'ttydd': device_add
[   14.048055] PM: Adding info for No Bus:ttydd
[   14.052052] device: 'ttyde': device_add
[   14.056054] PM: Adding info for No Bus:ttyde
[   14.060052] device: 'ttydf': device_add
[   14.064055] PM: Adding info for No Bus:ttydf
[   14.068053] device: 'ttye0': device_add
[   14.072055] PM: Adding info for No Bus:ttye0
[   14.076053] device: 'ttye1': device_add
[   14.080055] PM: Adding info for No Bus:ttye1
[   14.084052] device: 'ttye2': device_add
[   14.088080] PM: Adding info for No Bus:ttye2
[   14.092053] device: 'ttye3': device_add
[   14.096056] PM: Adding info for No Bus:ttye3
[   14.100052] device: 'ttye4': device_add
[   14.104055] PM: Adding info for No Bus:ttye4
[   14.108052] device: 'ttye5': device_add
[   14.112056] PM: Adding info for No Bus:ttye5
[   14.116052] device: 'ttye6': device_add
[   14.120056] PM: Adding info for No Bus:ttye6
[   14.124061] device: 'ttye7': device_add
[   14.128059] PM: Adding info for No Bus:ttye7
[   14.132053] device: 'ttye8': device_add
[   14.136068] PM: Adding info for No Bus:ttye8
[   14.140054] device: 'ttye9': device_add
[   14.144069] PM: Adding info for No Bus:ttye9
[   14.148053] device: 'ttyea': device_add
[   14.152059] PM: Adding info for No Bus:ttyea
[   14.156061] device: 'ttyeb': device_add
[   14.160060] PM: Adding info for No Bus:ttyeb
[   14.164054] device: 'ttyec': device_add
[   14.168059] PM: Adding info for No Bus:ttyec
[   14.172052] device: 'ttyed': device_add
[   14.176059] PM: Adding info for No Bus:ttyed
[   14.180052] device: 'ttyee': device_add
[   14.184070] PM: Adding info for No Bus:ttyee
[   14.188054] device: 'ttyef': device_add
[   14.192061] PM: Adding info for No Bus:ttyef
[   14.196074] device: 'ptmx': device_add
[   14.200060] PM: Adding info for No Bus:ptmx
[   14.204057] initcall pty_init+0x0/0x40e returned 0 after 3968750 usecs
[   14.208004] calling  sysrq_init+0x0/0x6d @ 1
[   14.212020] initcall sysrq_init+0x0/0x6d returned 0 after 0 usecs
[   14.216003] calling  rp_init+0x0/0xf40 @ 1
[   14.220002] RocketPort device driver module, version 2.09, 12-June-2003
[   14.224025] No rocketport ports found; unloading driver
[   14.228018] initcall rp_init+0x0/0xf40 returned -6 after 7812 usecs
[   14.232004] initcall rp_init+0x0/0xf40 returned with error code -6 
[   14.236003] calling  cy_init+0x0/0x453 @ 1
[   14.240003] Cyclades driver 2.6 (built Jun 11 2010 12:25:28)
[   14.257665] bus: 'pci': add driver cyclades
[   14.260069] initcall cy_init+0x0/0x453 returned 0 after 19531 usecs
[   14.264004] calling  epca_module_init+0x0/0x39e @ 1
[   14.268004] DIGI epca driver version 1.3.0.1-LK2.6 loaded.
[   14.272003] bus: 'pci': add driver epca
[   14.276076] device: 'ttyD0': device_add
[   14.280076] PM: Adding info for No Bus:ttyD0
[   14.284053] device: 'ttyD1': device_add
[   14.288069] PM: Adding info for No Bus:ttyD1
[   14.292054] device: 'ttyD2': device_add
[   14.296064] PM: Adding info for No Bus:ttyD2
[   14.300070] device: 'ttyD3': device_add
[   14.304065] PM: Adding info for No Bus:ttyD3
[   14.308054] device: 'ttyD4': device_add
[   14.312060] PM: Adding info for No Bus:ttyD4
[   14.316053] device: 'ttyD5': device_add
[   14.320061] PM: Adding info for No Bus:ttyD5
[   14.324053] device: 'ttyD6': device_add
[   14.328059] PM: Adding info for No Bus:ttyD6
[   14.336033] device: 'ttyD7': device_add
[   14.339931] PM: Adding info for No Bus:ttyD7
[   14.340053] device: 'ttyD8': device_add
[   14.344064] PM: Adding info for No Bus:ttyD8
[   14.348053] device: 'ttyD9': device_add
[   14.352059] PM: Adding info for No Bus:ttyD9
[   14.356053] device: 'ttyD10': device_add
[   14.360060] PM: Adding info for No Bus:ttyD10
[   14.364053] device: 'ttyD11': device_add
[   14.368060] PM: Adding info for No Bus:ttyD11
[   14.372052] device: 'ttyD12': device_add
[   14.376060] PM: Adding info for No Bus:ttyD12
[   14.380052] device: 'ttyD13': device_add
[   14.384070] PM: Adding info for No Bus:ttyD13
[   14.388053] device: 'ttyD14': device_add
[   14.392062] PM: Adding info for No Bus:ttyD14
[   14.396061] device: 'ttyD15': device_add
[   14.400064] PM: Adding info for No Bus:ttyD15
[   14.404061] device: 'ttyD16': device_add
[   14.408065] PM: Adding info for No Bus:ttyD16
[   14.412053] device: 'ttyD17': device_add
[   14.416061] PM: Adding info for No Bus:ttyD17
[   14.420052] device: 'ttyD18': device_add
[   14.424063] PM: Adding info for No Bus:ttyD18
[   14.428052] device: 'ttyD19': device_add
[   14.432070] PM: Adding info for No Bus:ttyD19
[   14.436053] device: 'ttyD20': device_add
[   14.440063] PM: Adding info for No Bus:ttyD20
[   14.444052] device: 'ttyD21': device_add
[   14.448076] PM: Adding info for No Bus:ttyD21
[   14.452053] device: 'ttyD22': device_add
[   14.456061] PM: Adding info for No Bus:ttyD22
[   14.460053] device: 'ttyD23': device_add
[   14.464061] PM: Adding info for No Bus:ttyD23
[   14.468052] device: 'ttyD24': device_add
[   14.472061] PM: Adding info for No Bus:ttyD24
[   14.476053] device: 'ttyD25': device_add
[   14.480070] PM: Adding info for No Bus:ttyD25
[   14.484054] device: 'ttyD26': device_add
[   14.488065] PM: Adding info for No Bus:ttyD26
[   14.492053] device: 'ttyD27': device_add
[   14.496061] PM: Adding info for No Bus:ttyD27
[   14.500052] device: 'ttyD28': device_add
[   14.504062] PM: Adding info for No Bus:ttyD28
[   14.508061] device: 'ttyD29': device_add
[   14.512066] PM: Adding info for No Bus:ttyD29
[   14.516054] device: 'ttyD30': device_add
[   14.520062] PM: Adding info for No Bus:ttyD30
[   14.524052] device: 'ttyD31': device_add
[   14.528071] PM: Adding info for No Bus:ttyD31
[   14.532054] device: 'ttyD32': device_add
[   14.536067] PM: Adding info for No Bus:ttyD32
[   14.540053] device: 'ttyD33': device_add
[   14.544062] PM: Adding info for No Bus:ttyD33
[   14.548053] device: 'ttyD34': device_add
[   14.552063] PM: Adding info for No Bus:ttyD34
[   14.556052] device: 'ttyD35': device_add
[   14.560063] PM: Adding info for No Bus:ttyD35
[   14.564053] device: 'ttyD36': device_add
[   14.568063] PM: Adding info for No Bus:ttyD36
[   14.572053] device: 'ttyD37': device_add
[   14.576075] PM: Adding info for No Bus:ttyD37
[   14.580054] device: 'ttyD38': device_add
[   14.584066] PM: Adding info for No Bus:ttyD38
[   14.588053] device: 'ttyD39': device_add
[   14.592076] PM: Adding info for No Bus:ttyD39
[   14.596054] device: 'ttyD40': device_add
[   14.600064] PM: Adding info for No Bus:ttyD40
[   14.604052] device: 'ttyD41': device_add
[   14.608089] PM: Adding info for No Bus:ttyD41
[   14.612061] device: 'ttyD42': device_add
[   14.616077] PM: Adding info for No Bus:ttyD42
[   14.620061] device: 'ttyD43': device_add
[   14.624076] PM: Adding info for No Bus:ttyD43
[   14.628054] device: 'ttyD44': device_add
[   14.632067] PM: Adding info for No Bus:ttyD44
[   14.636052] device: 'ttyD45': device_add
[   14.640064] PM: Adding info for No Bus:ttyD45
[   14.644053] device: 'ttyD46': device_add
[   14.648064] PM: Adding info for No Bus:ttyD46
[   14.652052] device: 'ttyD47': device_add
[   14.656064] PM: Adding info for No Bus:ttyD47
[   14.660053] device: 'ttyD48': device_add
[   14.664064] PM: Adding info for No Bus:ttyD48
[   14.668052] device: 'ttyD49': device_add
[   14.672073] PM: Adding info for No Bus:ttyD49
[   14.676054] device: 'ttyD50': device_add
[   14.680069] PM: Adding info for No Bus:ttyD50
[   14.684053] device: 'ttyD51': device_add
[   14.688064] PM: Adding info for No Bus:ttyD51
[   14.692053] device: 'ttyD52': device_add
[   14.696063] PM: Adding info for No Bus:ttyD52
[   14.700052] device: 'ttyD53': device_add
[   14.704063] PM: Adding info for No Bus:ttyD53
[   14.708052] device: 'ttyD54': device_add
[   14.712074] PM: Adding info for No Bus:ttyD54
[   14.716061] device: 'ttyD55': device_add
[   14.720079] PM: Adding info for No Bus:ttyD55
[   14.724054] device: 'ttyD56': device_add
[   14.728068] PM: Adding info for No Bus:ttyD56
[   14.732052] device: 'ttyD57': device_add
[   14.736075] PM: Adding info for No Bus:ttyD57
[   14.740054] device: 'ttyD58': device_add
[   14.744068] PM: Adding info for No Bus:ttyD58
[   14.748053] device: 'ttyD59': device_add
[   14.752064] PM: Adding info for No Bus:ttyD59
[   14.756052] device: 'ttyD60': device_add
[   14.760064] PM: Adding info for No Bus:ttyD60
[   14.764053] device: 'ttyD61': device_add
[   14.768074] PM: Adding info for No Bus:ttyD61
[   14.772054] device: 'ttyD62': device_add
[   14.776069] PM: Adding info for No Bus:ttyD62
[   14.780052] device: 'ttyD63': device_add
[   14.784065] PM: Adding info for No Bus:ttyD63
[   14.788052] device: 'ttyD64': device_add
[   14.792066] PM: Adding info for No Bus:ttyD64
[   14.796053] device: 'ttyD65': device_add
[   14.800066] PM: Adding info for No Bus:ttyD65
[   14.804053] device: 'ttyD66': device_add
[   14.808065] PM: Adding info for No Bus:ttyD66
[   14.812053] device: 'ttyD67': device_add
[   14.816092] PM: Adding info for No Bus:ttyD67
[   14.820062] device: 'ttyD68': device_add
[   14.824073] PM: Adding info for No Bus:ttyD68
[   14.828053] device: 'ttyD69': device_add
[   14.832066] PM: Adding info for No Bus:ttyD69
[   14.836052] device: 'ttyD70': device_add
[   14.840065] PM: Adding info for No Bus:ttyD70
[   14.844061] device: 'ttyD71': device_add
[   14.848070] PM: Adding info for No Bus:ttyD71
[   14.852053] device: 'ttyD72': device_add
[   14.856066] PM: Adding info for No Bus:ttyD72
[   14.860053] device: 'ttyD73': device_add
[   14.864076] PM: Adding info for No Bus:ttyD73
[   14.868054] device: 'ttyD74': device_add
[   14.872069] PM: Adding info for No Bus:ttyD74
[   14.876052] device: 'ttyD75': device_add
[   14.880066] PM: Adding info for No Bus:ttyD75
[   14.884063] device: 'ttyD76': device_add
[   14.888071] PM: Adding info for No Bus:ttyD76
[   14.892053] device: 'ttyD77': device_add
[   14.896066] PM: Adding info for No Bus:ttyD77
[   14.900052] device: 'ttyD78': device_add
[   14.904066] PM: Adding info for No Bus:ttyD78
[   14.908052] device: 'ttyD79': device_add
[   14.912077] PM: Adding info for No Bus:ttyD79
[   14.916053] device: 'ttyD80': device_add
[   14.920070] PM: Adding info for No Bus:ttyD80
[   14.924060] device: 'ttyD81': device_add
[   14.928072] PM: Adding info for No Bus:ttyD81
[   14.932053] device: 'ttyD82': device_add
[   14.936070] PM: Adding info for No Bus:ttyD82
[   14.940053] device: 'ttyD83': device_add
[   14.944067] PM: Adding info for No Bus:ttyD83
[   14.948052] device: 'ttyD84': device_add
[   14.952067] PM: Adding info for No Bus:ttyD84
[   14.956053] device: 'ttyD85': device_add
[   14.960077] PM: Adding info for No Bus:ttyD85
[   14.964054] device: 'ttyD86': device_add
[   14.968071] PM: Adding info for No Bus:ttyD86
[   14.972052] device: 'ttyD87': device_add
[   14.976069] PM: Adding info for No Bus:ttyD87
[   14.980053] device: 'ttyD88': device_add
[   14.984068] PM: Adding info for No Bus:ttyD88
[   14.988053] device: 'ttyD89': device_add
[   14.992068] PM: Adding info for No Bus:ttyD89
[   14.996053] device: 'ttyD90': device_add
[   15.000070] PM: Adding info for No Bus:ttyD90
[   15.004053] device: 'ttyD91': device_add
[   15.008080] PM: Adding info for No Bus:ttyD91
[   15.012054] device: 'ttyD92': device_add
[   15.016073] PM: Adding info for No Bus:ttyD92
[   15.020053] device: 'ttyD93': device_add
[   15.024071] PM: Adding info for No Bus:ttyD93
[   15.028061] device: 'ttyD94': device_add
[   15.032086] PM: Adding info for No Bus:ttyD94
[   15.036054] device: 'ttyD95': device_add
[   15.040071] PM: Adding info for No Bus:ttyD95
[   15.044053] device: 'ttyD96': device_add
[   15.048070] PM: Adding info for No Bus:ttyD96
[   15.052052] device: 'ttyD97': device_add
[   15.056080] PM: Adding info for No Bus:ttyD97
[   15.060054] device: 'ttyD98': device_add
[   15.064068] PM: Adding info for No Bus:ttyD98
[   15.068061] device: 'ttyD99': device_add
[   15.072076] PM: Adding info for No Bus:ttyD99
[   15.076053] device: 'ttyD100': device_add
[   15.080071] PM: Adding info for No Bus:ttyD100
[   15.084053] device: 'ttyD101': device_add
[   15.088071] PM: Adding info for No Bus:ttyD101
[   15.092053] device: 'ttyD102': device_add
[   15.096071] PM: Adding info for No Bus:ttyD102
[   15.100053] device: 'ttyD103': device_add
[   15.104081] PM: Adding info for No Bus:ttyD103
[   15.108054] device: 'ttyD104': device_add
[   15.112074] PM: Adding info for No Bus:ttyD104
[   15.116053] device: 'ttyD105': device_add
[   15.120071] PM: Adding info for No Bus:ttyD105
[   15.124053] device: 'ttyD106': device_add
[   15.128071] PM: Adding info for No Bus:ttyD106
[   15.132061] device: 'ttyD107': device_add
[   15.136077] PM: Adding info for No Bus:ttyD107
[   15.140054] device: 'ttyD108': device_add
[   15.144072] PM: Adding info for No Bus:ttyD108
[   15.148053] device: 'ttyD109': device_add
[   15.152082] PM: Adding info for No Bus:ttyD109
[   15.156054] device: 'ttyD110': device_add
[   15.160076] PM: Adding info for No Bus:ttyD110
[   15.164053] device: 'ttyD111': device_add
[   15.168073] PM: Adding info for No Bus:ttyD111
[   15.172053] device: 'ttyD112': device_add
[   15.176088] PM: Adding info for No Bus:ttyD112
[   15.180054] device: 'ttyD113': device_add
[   15.184074] PM: Adding info for No Bus:ttyD113
[   15.188053] device: 'ttyD114': device_add
[   15.192076] PM: Adding info for No Bus:ttyD114
[   15.196052] device: 'ttyD115': device_add
[   15.200084] PM: Adding info for No Bus:ttyD115
[   15.204055] device: 'ttyD116': device_add
[   15.208078] PM: Adding info for No Bus:ttyD116
[   15.212053] device: 'ttyD117': device_add
[   15.216075] PM: Adding info for No Bus:ttyD117
[   15.220053] device: 'ttyD118': device_add
[   15.224086] PM: Adding info for No Bus:ttyD118
[   15.228054] device: 'ttyD119': device_add
[   15.236067] PM: Adding info for No Bus:ttyD119
[   15.240061] device: 'ttyD120': device_add
[   15.244079] PM: Adding info for No Bus:ttyD120
[   15.248053] device: 'ttyD121': device_add
[   15.252088] PM: Adding info for No Bus:ttyD121
[   15.256055] device: 'ttyD122': device_add
[   15.260081] PM: Adding info for No Bus:ttyD122
[   15.264053] device: 'ttyD123': device_add
[   15.268075] PM: Adding info for No Bus:ttyD123
[   15.272053] device: 'ttyD124': device_add
[   15.276076] PM: Adding info for No Bus:ttyD124
[   15.280053] device: 'ttyD125': device_add
[   15.284075] PM: Adding info for No Bus:ttyD125
[   15.288053] device: 'ttyD126': device_add
[   15.292075] PM: Adding info for No Bus:ttyD126
[   15.296062] device: 'ttyD127': device_add
[   15.300089] PM: Adding info for No Bus:ttyD127
[   15.304055] device: 'ttyD128': device_add
[   15.308080] PM: Adding info for No Bus:ttyD128
[   15.312053] device: 'ttyD129': device_add
[   15.316076] PM: Adding info for No Bus:ttyD129
[   15.320053] device: 'ttyD130': device_add
[   15.324088] PM: Adding info for No Bus:ttyD130
[   15.328054] device: 'ttyD131': device_add
[   15.332080] PM: Adding info for No Bus:ttyD131
[   15.336053] device: 'ttyD132': device_add
[   15.340077] PM: Adding info for No Bus:ttyD132
[   15.344061] device: 'ttyD133': device_add
[   15.348091] PM: Adding info for No Bus:ttyD133
[   15.352054] device: 'ttyD134': device_add
[   15.356083] PM: Adding info for No Bus:ttyD134
[   15.360053] device: 'ttyD135': device_add
[   15.364078] PM: Adding info for No Bus:ttyD135
[   15.368053] device: 'ttyD136': device_add
[   15.372078] PM: Adding info for No Bus:ttyD136
[   15.376053] device: 'ttyD137': device_add
[   15.380078] PM: Adding info for No Bus:ttyD137
[   15.384053] device: 'ttyD138': device_add
[   15.388079] PM: Adding info for No Bus:ttyD138
[   15.392053] device: 'ttyD139': device_add
[   15.396088] PM: Adding info for No Bus:ttyD139
[   15.400055] device: 'ttyD140': device_add
[   15.404082] PM: Adding info for No Bus:ttyD140
[   15.408053] device: 'ttyD141': device_add
[   15.412078] PM: Adding info for No Bus:ttyD141
[   15.416053] device: 'ttyD142': device_add
[   15.420078] PM: Adding info for No Bus:ttyD142
[   15.424053] device: 'ttyD143': device_add
[   15.428079] PM: Adding info for No Bus:ttyD143
[   15.432053] device: 'ttyD144': device_add
[   15.436079] PM: Adding info for No Bus:ttyD144
[   15.440053] device: 'ttyD145': device_add
[   15.444089] PM: Adding info for No Bus:ttyD145
[   15.448063] device: 'ttyD146': device_add
[   15.452087] PM: Adding info for No Bus:ttyD146
[   15.456054] device: 'ttyD147': device_add
[   15.460080] PM: Adding info for No Bus:ttyD147
[   15.464053] device: 'ttyD148': device_add
[   15.468080] PM: Adding info for No Bus:ttyD148
[   15.472064] device: 'ttyD149': device_add
[   15.476084] PM: Adding info for No Bus:ttyD149
[   15.480055] device: 'ttyD150': device_add
[   15.484081] PM: Adding info for No Bus:ttyD150
[   15.488053] device: 'ttyD151': device_add
[   15.492090] PM: Adding info for No Bus:ttyD151
[   15.496055] device: 'ttyD152': device_add
[   15.500085] PM: Adding info for No Bus:ttyD152
[   15.508020] device: 'ttyD153': device_add
[   15.512081] PM: Adding info for No Bus:ttyD153
[   15.516053] device: 'ttyD154': device_add
[   15.520082] PM: Adding info for No Bus:ttyD154
[   15.524063] device: 'ttyD155': device_add
[   15.528087] PM: Adding info for No Bus:ttyD155
[   15.532055] device: 'ttyD156': device_add
[   15.536082] PM: Adding info for No Bus:ttyD156
[   15.540054] device: 'ttyD157': device_add
[   15.544093] PM: Adding info for No Bus:ttyD157
[   15.548056] device: 'ttyD158': device_add
[   15.552085] PM: Adding info for No Bus:ttyD158
[   15.556062] device: 'ttyD159': device_add
[   15.560088] PM: Adding info for No Bus:ttyD159
[   15.564055] device: 'ttyD160': device_add
[   15.568083] PM: Adding info for No Bus:ttyD160
[   15.572053] device: 'ttyD161': device_add
[   15.576082] PM: Adding info for No Bus:ttyD161
[   15.580053] device: 'ttyD162': device_add
[   15.584083] PM: Adding info for No Bus:ttyD162
[   15.588053] device: 'ttyD163': device_add
[   15.592091] PM: Adding info for No Bus:ttyD163
[   15.596055] device: 'ttyD164': device_add
[   15.600087] PM: Adding info for No Bus:ttyD164
[   15.604054] device: 'ttyD165': device_add
[   15.608082] PM: Adding info for No Bus:ttyD165
[   15.612053] device: 'ttyD166': device_add
[   15.616083] PM: Adding info for No Bus:ttyD166
[   15.620054] device: 'ttyD167': device_add
[   15.624097] PM: Adding info for No Bus:ttyD167
[   15.628055] device: 'ttyD168': device_add
[   15.632084] PM: Adding info for No Bus:ttyD168
[   15.636053] device: 'ttyD169': device_add
[   15.640094] PM: Adding info for No Bus:ttyD169
[   15.644055] device: 'ttyD170': device_add
[   15.648088] PM: Adding info for No Bus:ttyD170
[   15.652054] device: 'ttyD171': device_add
[   15.656083] PM: Adding info for No Bus:ttyD171
[   15.660063] device: 'ttyD172': device_add
[   15.664088] PM: Adding info for No Bus:ttyD172
[   15.668056] device: 'ttyD173': device_add
[   15.672086] PM: Adding info for No Bus:ttyD173
[   15.676054] device: 'ttyD174': device_add
[   15.680084] PM: Adding info for No Bus:ttyD174
[   15.684054] device: 'ttyD175': device_add
[   15.688095] PM: Adding info for No Bus:ttyD175
[   15.692055] device: 'ttyD176': device_add
[   15.696089] PM: Adding info for No Bus:ttyD176
[   15.700054] device: 'ttyD177': device_add
[   15.704086] PM: Adding info for No Bus:ttyD177
[   15.708053] device: 'ttyD178': device_add
[   15.712084] PM: Adding info for No Bus:ttyD178
[   15.716054] device: 'ttyD179': device_add
[   15.720084] PM: Adding info for No Bus:ttyD179
[   15.728034] device: 'ttyD180': device_add
[   15.732084] PM: Adding info for No Bus:ttyD180
[   15.736054] device: 'ttyD181': device_add
[   15.740096] PM: Adding info for No Bus:ttyD181
[   15.744055] device: 'ttyD182': device_add
[   15.748121] PM: Adding info for No Bus:ttyD182
[   15.752063] device: 'ttyD183': device_add
[   15.756101] PM: Adding info for No Bus:ttyD183
[   15.760054] device: 'ttyD184': device_add
[   15.764094] PM: Adding info for No Bus:ttyD184
[   15.768062] device: 'ttyD185': device_add
[   15.772105] PM: Adding info for No Bus:ttyD185
[   15.776055] device: 'ttyD186': device_add
[   15.780090] PM: Adding info for No Bus:ttyD186
[   15.784054] device: 'ttyD187': device_add
[   15.788098] PM: Adding info for No Bus:ttyD187
[   15.792055] device: 'ttyD188': device_add
[   15.796092] PM: Adding info for No Bus:ttyD188
[   15.800054] device: 'ttyD189': device_add
[   15.804087] PM: Adding info for No Bus:ttyD189
[   15.808053] device: 'ttyD190': device_add
[   15.812088] PM: Adding info for No Bus:ttyD190
[   15.816064] device: 'ttyD191': device_add
[   15.820094] PM: Adding info for No Bus:ttyD191
[   15.824054] device: 'ttyD192': device_add
[   15.828089] PM: Adding info for No Bus:ttyD192
[   15.832054] device: 'ttyD193': device_add
[   15.840024] PM: Adding info for No Bus:ttyD193
[   15.844055] device: 'ttyD194': device_add
[   15.848094] PM: Adding info for No Bus:ttyD194
[   15.852054] device: 'ttyD195': device_add
[   15.856089] PM: Adding info for No Bus:ttyD195
[   15.860054] device: 'ttyD196': device_add
[   15.864089] PM: Adding info for No Bus:ttyD196
[   15.868054] device: 'ttyD197': device_add
[   15.872090] PM: Adding info for No Bus:ttyD197
[   15.876062] device: 'ttyD198': device_add
[   15.880094] PM: Adding info for No Bus:ttyD198
[   15.884055] device: 'ttyD199': device_add
[   15.888101] PM: Adding info for No Bus:ttyD199
[   15.892055] device: 'ttyD200': device_add
[   15.896093] PM: Adding info for No Bus:ttyD200
[   15.900054] device: 'ttyD201': device_add
[   15.904089] PM: Adding info for No Bus:ttyD201
[   15.908054] device: 'ttyD202': device_add
[   15.912090] PM: Adding info for No Bus:ttyD202
[   15.916053] device: 'ttyD203': device_add
[   15.920101] PM: Adding info for No Bus:ttyD203
[   15.924055] device: 'ttyD204': device_add
[   15.928094] PM: Adding info for No Bus:ttyD204
[   15.932054] device: 'ttyD205': device_add
[   15.936101] PM: Adding info for No Bus:ttyD205
[   15.940055] device: 'ttyD206': device_add
[   15.944093] PM: Adding info for No Bus:ttyD206
[   15.948054] device: 'ttyD207': device_add
[   15.952089] PM: Adding info for No Bus:ttyD207
[   15.956054] device: 'ttyD208': device_add
[   15.960093] PM: Adding info for No Bus:ttyD208
[   15.964054] device: 'ttyD209': device_add
[   15.968090] PM: Adding info for No Bus:ttyD209
[   15.972054] device: 'ttyD210': device_add
[   15.976090] PM: Adding info for No Bus:ttyD210
[   15.980073] device: 'ttyD211': device_add
[   15.984107] PM: Adding info for No Bus:ttyD211
[   15.988056] device: 'ttyD212': device_add
[   15.992095] PM: Adding info for No Bus:ttyD212
[   15.996054] device: 'ttyD213': device_add
[   16.004033] PM: Adding info for No Bus:ttyD213
[   16.008054] device: 'ttyD214': device_add
[   16.012091] PM: Adding info for No Bus:ttyD214
[   16.016054] device: 'ttyD215': device_add
[   16.020091] PM: Adding info for No Bus:ttyD215
[   16.024054] device: 'ttyD216': device_add
[   16.028091] PM: Adding info for No Bus:ttyD216
[   16.032054] device: 'ttyD217': device_add
[   16.036100] PM: Adding info for No Bus:ttyD217
[   16.040055] device: 'ttyD218': device_add
[   16.044096] PM: Adding info for No Bus:ttyD218
[   16.048054] device: 'ttyD219': device_add
[   16.052091] PM: Adding info for No Bus:ttyD219
[   16.056054] device: 'ttyD220': device_add
[   16.060091] PM: Adding info for No Bus:ttyD220
[   16.064054] device: 'ttyD221': device_add
[   16.068092] PM: Adding info for No Bus:ttyD221
[   16.072065] device: 'ttyD222': device_add
[   16.076099] PM: Adding info for No Bus:ttyD222
[   16.080055] device: 'ttyD223': device_add
[   16.084102] PM: Adding info for No Bus:ttyD223
[   16.088063] device: 'ttyD224': device_add
[   16.092098] PM: Adding info for No Bus:ttyD224
[   16.096055] device: 'ttyD225': device_add
[   16.100093] PM: Adding info for No Bus:ttyD225
[   16.104054] device: 'ttyD226': device_add
[   16.108093] PM: Adding info for No Bus:ttyD226
[   16.112054] device: 'ttyD227': device_add
[   16.116093] PM: Adding info for No Bus:ttyD227
[   16.120053] device: 'ttyD228': device_add
[   16.124093] PM: Adding info for No Bus:ttyD228
[   16.128054] device: 'ttyD229': device_add
[   16.132103] PM: Adding info for No Bus:ttyD229
[   16.136055] device: 'ttyD230': device_add
[   16.140099] PM: Adding info for No Bus:ttyD230
[   16.144054] device: 'ttyD231': device_add
[   16.148093] PM: Adding info for No Bus:ttyD231
[   16.152054] device: 'ttyD232': device_add
[   16.156095] PM: Adding info for No Bus:ttyD232
[   16.160054] device: 'ttyD233': device_add
[   16.168068] PM: Adding info for No Bus:ttyD233
[   16.172054] device: 'ttyD234': device_add
[   16.176094] PM: Adding info for No Bus:ttyD234
[   16.180055] device: 'ttyD235': device_add
[   16.184106] PM: Adding info for No Bus:ttyD235
[   16.188056] device: 'ttyD236': device_add
[   16.192100] PM: Adding info for No Bus:ttyD236
[   16.196063] device: 'ttyD237': device_add
[   16.200101] PM: Adding info for No Bus:ttyD237
[   16.204055] device: 'ttyD238': device_add
[   16.208096] PM: Adding info for No Bus:ttyD238
[   16.212063] device: 'ttyD239': device_add
[   16.216105] PM: Adding info for No Bus:ttyD239
[   16.220055] device: 'ttyD240': device_add
[   16.224112] PM: Adding info for No Bus:ttyD240
[   16.228055] device: 'ttyD241': device_add
[   16.232106] PM: Adding info for No Bus:ttyD241
[   16.236055] device: 'ttyD242': device_add
[   16.240101] PM: Adding info for No Bus:ttyD242
[   16.244054] device: 'ttyD243': device_add
[   16.248097] PM: Adding info for No Bus:ttyD243
[   16.252054] device: 'ttyD244': device_add
[   16.256097] PM: Adding info for No Bus:ttyD244
[   16.260055] device: 'ttyD245': device_add
[   16.264096] PM: Adding info for No Bus:ttyD245
[   16.268054] device: 'ttyD246': device_add
[   16.276006] PM: Adding info for No Bus:ttyD246
[   16.280055] device: 'ttyD247': device_add
[   16.284114] PM: Adding info for No Bus:ttyD247
[   16.288055] device: 'ttyD248': device_add
[   16.292102] PM: Adding info for No Bus:ttyD248
[   16.296054] device: 'ttyD249': device_add
[   16.300098] PM: Adding info for No Bus:ttyD249
[   16.304063] device: 'ttyD250': device_add
[   16.308104] PM: Adding info for No Bus:ttyD250
[   16.312055] device: 'ttyD251': device_add
[   16.316099] PM: Adding info for No Bus:ttyD251
[   16.320054] device: 'ttyD252': device_add
[   16.324099] PM: Adding info for No Bus:ttyD252
[   16.328054] device: 'ttyD253': device_add
[   16.332110] PM: Adding info for No Bus:ttyD253
[   16.336056] device: 'ttyD254': device_add
[   16.340104] PM: Adding info for No Bus:ttyD254
[   16.344054] device: 'ttyD255': device_add
[   16.348100] PM: Adding info for No Bus:ttyD255
[   16.352068] device: 'digi_ctl0': device_add
[   16.356085] PM: Adding info for No Bus:digi_ctl0
[   16.360055] device: 'digi_ctl1': device_add
[   16.364085] PM: Adding info for No Bus:digi_ctl1
[   16.368054] device: 'digi_ctl2': device_add
[   16.372085] PM: Adding info for No Bus:digi_ctl2
[   16.376054] device: 'digi_ctl3': device_add
[   16.380096] PM: Adding info for No Bus:digi_ctl3
[   16.384056] device: 'digi_ctl4': device_add
[   16.388090] PM: Adding info for No Bus:digi_ctl4
[   16.392054] device: 'digi_ctl5': device_add
[   16.396101] PM: Adding info for No Bus:digi_ctl5
[   16.400056] device: 'digi_ctl6': device_add
[   16.404088] PM: Adding info for No Bus:digi_ctl6
[   16.408063] device: 'digi_ctl7': device_add
[   16.412091] PM: Adding info for No Bus:digi_ctl7
[   16.416055] device: 'digi_ctl8': device_add
[   16.420086] PM: Adding info for No Bus:digi_ctl8
[   16.424054] device: 'digi_ctl9': device_add
[   16.428095] PM: Adding info for No Bus:digi_ctl9
[   16.432063] device: 'digi_ctl10': device_add
[   16.436094] PM: Adding info for No Bus:digi_ctl10
[   16.440056] device: 'digi_ctl11': device_add
[   16.444086] PM: Adding info for No Bus:digi_ctl11
[   16.448054] device: 'digi_ctl12': device_add
[   16.452086] PM: Adding info for No Bus:digi_ctl12
[   16.456054] device: 'digi_ctl13': device_add
[   16.460087] PM: Adding info for No Bus:digi_ctl13
[   16.464054] device: 'digi_ctl14': device_add
[   16.468087] PM: Adding info for No Bus:digi_ctl14
[   16.472055] device: 'digi_ctl15': device_add
[   16.476099] PM: Adding info for No Bus:digi_ctl15
[   16.480055] device: 'digi_ctl16': device_add
[   16.484091] PM: Adding info for No Bus:digi_ctl16
[   16.488054] device: 'digi_ctl17': device_add
[   16.492089] PM: Adding info for No Bus:digi_ctl17
[   16.496066] device: 'digi_ctl18': device_add
[   16.500094] PM: Adding info for No Bus:digi_ctl18
[   16.504055] device: 'digi_ctl19': device_add
[   16.508090] PM: Adding info for No Bus:digi_ctl19
[   16.512063] device: 'digi_ctl20': device_add
[   16.516094] PM: Adding info for No Bus:digi_ctl20
[   16.520055] device: 'digi_ctl21': device_add
[   16.524100] PM: Adding info for No Bus:digi_ctl21
[   16.528056] device: 'digi_ctl22': device_add
[   16.532096] PM: Adding info for No Bus:digi_ctl22
[   16.536054] device: 'digi_ctl23': device_add
[   16.540091] PM: Adding info for No Bus:digi_ctl23
[   16.544054] device: 'digi_ctl24': device_add
[   16.548091] PM: Adding info for No Bus:digi_ctl24
[   16.552054] device: 'digi_ctl25': device_add
[   16.556091] PM: Adding info for No Bus:digi_ctl25
[   16.560055] device: 'digi_ctl26': device_add
[   16.564091] PM: Adding info for No Bus:digi_ctl26
[   16.568054] device: 'digi_ctl27': device_add
[   16.572102] PM: Adding info for No Bus:digi_ctl27
[   16.576056] device: 'digi_ctl28': device_add
[   16.580097] PM: Adding info for No Bus:digi_ctl28
[   16.584055] device: 'digi_ctl29': device_add
[   16.588092] PM: Adding info for No Bus:digi_ctl29
[   16.592055] device: 'digi_ctl30': device_add
[   16.596093] PM: Adding info for No Bus:digi_ctl30
[   16.600054] device: 'digi_ctl31': device_add
[   16.604094] PM: Adding info for No Bus:digi_ctl31
[   16.608055] device: 'digi_ctl32': device_add
[   16.612093] PM: Adding info for No Bus:digi_ctl32
[   16.616063] device: 'digi_ctl33': device_add
[   16.620109] PM: Adding info for No Bus:digi_ctl33
[   16.624056] device: 'digi_ctl34': device_add
[   16.628099] PM: Adding info for No Bus:digi_ctl34
[   16.632055] device: 'digi_ctl35': device_add
[   16.636094] PM: Adding info for No Bus:digi_ctl35
[   16.640054] device: 'digi_ctl36': device_add
[   16.644094] PM: Adding info for No Bus:digi_ctl36
[   16.648054] device: 'digi_ctl37': device_add
[   16.652094] PM: Adding info for No Bus:digi_ctl37
[   16.656063] device: 'digi_ctl38': device_add
[   16.660100] PM: Adding info for No Bus:digi_ctl38
[   16.664056] device: 'digi_ctl39': device_add
[   16.668120] PM: Adding info for No Bus:digi_ctl39
[   16.672056] device: 'digi_ctl40': device_add
[   16.676100] PM: Adding info for No Bus:digi_ctl40
[   16.680054] device: 'digi_ctl41': device_add
[   16.684110] PM: Adding info for No Bus:digi_ctl41
[   16.688055] device: 'digi_ctl42': device_add
[   16.692101] PM: Adding info for No Bus:digi_ctl42
[   16.696054] device: 'digi_ctl43': device_add
[   16.700095] PM: Adding info for No Bus:digi_ctl43
[   16.704054] device: 'digi_ctl44': device_add
[   16.708095] PM: Adding info for No Bus:digi_ctl44
[   16.712054] device: 'digi_ctl45': device_add
[   16.716105] PM: Adding info for No Bus:digi_ctl45
[   16.720063] device: 'digi_ctl46': device_add
[   16.724104] PM: Adding info for No Bus:digi_ctl46
[   16.728056] device: 'digi_ctl47': device_add
[   16.732097] PM: Adding info for No Bus:digi_ctl47
[   16.736054] device: 'digi_ctl48': device_add
[   16.740098] PM: Adding info for No Bus:digi_ctl48
[   16.744054] device: 'digi_ctl49': device_add
[   16.748097] PM: Adding info for No Bus:digi_ctl49
[   16.752054] device: 'digi_ctl50': device_add
[   16.756098] PM: Adding info for No Bus:digi_ctl50
[   16.760054] device: 'digi_ctl51': device_add
[   16.764107] PM: Adding info for No Bus:digi_ctl51
[   16.768056] device: 'digi_ctl52': device_add
[   16.772101] PM: Adding info for No Bus:digi_ctl52
[   16.776054] device: 'digi_ctl53': device_add
[   16.780098] PM: Adding info for No Bus:digi_ctl53
[   16.784054] device: 'digi_ctl54': device_add
[   16.788099] PM: Adding info for No Bus:digi_ctl54
[   16.792054] device: 'digi_ctl55': device_add
[   16.796099] PM: Adding info for No Bus:digi_ctl55
[   16.800054] device: 'digi_ctl56': device_add
[   16.804099] PM: Adding info for No Bus:digi_ctl56
[   16.808054] device: 'digi_ctl57': device_add
[   16.812109] PM: Adding info for No Bus:digi_ctl57
[   16.816068] device: 'digi_ctl58': device_add
[   16.820110] PM: Adding info for No Bus:digi_ctl58
[   16.824064] device: 'digi_ctl59': device_add
[   16.828106] PM: Adding info for No Bus:digi_ctl59
[   16.832056] device: 'digi_ctl60': device_add
[   16.840110] PM: Adding info for No Bus:digi_ctl60
[   16.844056] device: 'digi_ctl61': device_add
[   16.848103] PM: Adding info for No Bus:digi_ctl61
[   16.852055] device: 'digi_ctl62': device_add
[   16.856100] PM: Adding info for No Bus:digi_ctl62
[   16.860055] device: 'digi_ctl63': device_add
[   16.864110] PM: Adding info for No Bus:digi_ctl63
[   16.868056] device: 'digi_ctl64': device_add
[   16.872105] PM: Adding info for No Bus:digi_ctl64
[   16.876055] device: 'digi_ctl65': device_add
[   16.880101] PM: Adding info for No Bus:digi_ctl65
[   16.884064] device: 'digi_ctl66': device_add
[   16.888106] PM: Adding info for No Bus:digi_ctl66
[   16.892055] device: 'digi_ctl67': device_add
[   16.900037] PM: Adding info for No Bus:digi_ctl67
[   16.904054] device: 'digi_ctl68': device_add
[   16.908123] PM: Adding info for No Bus:digi_ctl68
[   16.912055] device: 'digi_ctl69': device_add
[   16.916123] PM: Adding info for No Bus:digi_ctl69
[   16.920056] device: 'digi_ctl70': device_add
[   16.924112] PM: Adding info for No Bus:digi_ctl70
[   16.928055] device: 'digi_ctl71': device_add
[   16.932104] PM: Adding info for No Bus:digi_ctl71
[   16.936063] device: 'digi_ctl72': device_add
[   16.940110] PM: Adding info for No Bus:digi_ctl72
[   16.944055] device: 'digi_ctl73': device_add
[   16.948103] PM: Adding info for No Bus:digi_ctl73
[   16.952054] device: 'digi_ctl74': device_add
[   16.960013] PM: Adding info for No Bus:digi_ctl74
[   16.964054] device: 'digi_ctl75': device_add
[   16.968112] PM: Adding info for No Bus:digi_ctl75
[   16.972056] device: 'digi_ctl76': device_add
[   16.976106] PM: Adding info for No Bus:digi_ctl76
[   16.980055] device: 'digi_ctl77': device_add
[   16.984106] PM: Adding info for No Bus:digi_ctl77
[   16.988055] device: 'digi_ctl78': device_add
[   16.992120] PM: Adding info for No Bus:digi_ctl78
[   16.996056] device: 'digi_ctl79': device_add
[   17.000107] PM: Adding info for No Bus:digi_ctl79
[   17.004055] device: 'digi_ctl80': device_add
[   17.008104] PM: Adding info for No Bus:digi_ctl80
[   17.012055] device: 'digi_ctl81': device_add
[   17.016114] PM: Adding info for No Bus:digi_ctl81
[   17.020066] device: 'digi_ctl82': device_add
[   17.024111] PM: Adding info for No Bus:digi_ctl82
[   17.028056] device: 'digi_ctl83': device_add
[   17.032105] PM: Adding info for No Bus:digi_ctl83
[   17.036055] device: 'digi_ctl84': device_add
[   17.040105] PM: Adding info for No Bus:digi_ctl84
[   17.044064] device: 'digi_ctl85': device_add
[   17.048111] PM: Adding info for No Bus:digi_ctl85
[   17.052055] device: 'digi_ctl86': device_add
[   17.056106] PM: Adding info for No Bus:digi_ctl86
[   17.060055] device: 'digi_ctl87': device_add
[   17.064115] PM: Adding info for No Bus:digi_ctl87
[   17.068056] device: 'digi_ctl88': device_add
[   17.072110] PM: Adding info for No Bus:digi_ctl88
[   17.076055] device: 'digi_ctl89': device_add
[   17.080106] PM: Adding info for No Bus:digi_ctl89
[   17.084055] device: 'digi_ctl90': device_add
[   17.088106] PM: Adding info for No Bus:digi_ctl90
[   17.092054] device: 'digi_ctl91': device_add
[   17.096106] PM: Adding info for No Bus:digi_ctl91
[   17.100055] device: 'digi_ctl92': device_add
[   17.104108] PM: Adding info for No Bus:digi_ctl92
[   17.108055] device: 'digi_ctl93': device_add
[   17.112116] PM: Adding info for No Bus:digi_ctl93
[   17.116064] device: 'digi_ctl94': device_add
[   17.120116] PM: Adding info for No Bus:digi_ctl94
[   17.124056] device: 'digi_ctl95': device_add
[   17.128108] PM: Adding info for No Bus:digi_ctl95
[   17.132054] device: 'digi_ctl96': device_add
[   17.136108] PM: Adding info for No Bus:digi_ctl96
[   17.140054] device: 'digi_ctl97': device_add
[   17.144108] PM: Adding info for No Bus:digi_ctl97
[   17.148064] device: 'digi_ctl98': device_add
[   17.152114] PM: Adding info for No Bus:digi_ctl98
[   17.156056] device: 'digi_ctl99': device_add
[   17.160118] PM: Adding info for No Bus:digi_ctl99
[   17.164056] device: 'digi_ctl100': device_add
[   17.168116] PM: Adding info for No Bus:digi_ctl100
[   17.172055] device: 'digi_ctl101': device_add
[   17.176110] PM: Adding info for No Bus:digi_ctl101
[   17.180055] device: 'digi_ctl102': device_add
[   17.184110] PM: Adding info for No Bus:digi_ctl102
[   17.188054] device: 'digi_ctl103': device_add
[   17.192127] PM: Adding info for No Bus:digi_ctl103
[   17.196056] device: 'digi_ctl104': device_add
[   17.200111] PM: Adding info for No Bus:digi_ctl104
[   17.204055] device: 'digi_ctl105': device_add
[   17.208119] PM: Adding info for No Bus:digi_ctl105
[   17.212056] device: 'digi_ctl106': device_add
[   17.216115] PM: Adding info for No Bus:digi_ctl106
[   17.220055] device: 'digi_ctl107': device_add
[   17.224111] PM: Adding info for No Bus:digi_ctl107
[   17.228055] device: 'digi_ctl108': device_add
[   17.232111] PM: Adding info for No Bus:digi_ctl108
[   17.236055] device: 'digi_ctl109': device_add
[   17.240112] PM: Adding info for No Bus:digi_ctl109
[   17.244055] device: 'digi_ctl110': device_add
[   17.248110] PM: Adding info for No Bus:digi_ctl110
[   17.252064] device: 'digi_ctl111': device_add
[   17.256127] PM: Adding info for No Bus:digi_ctl111
[   17.260056] device: 'digi_ctl112': device_add
[   17.264117] PM: Adding info for No Bus:digi_ctl112
[   17.268055] device: 'digi_ctl113': device_add
[   17.272111] PM: Adding info for No Bus:digi_ctl113
[   17.276055] device: 'digi_ctl114': device_add
[   17.280124] PM: Adding info for No Bus:digi_ctl114
[   17.284057] device: 'digi_ctl115': device_add
[   17.288118] PM: Adding info for No Bus:digi_ctl115
[   17.292055] device: 'digi_ctl116': device_add
[   17.296113] PM: Adding info for No Bus:digi_ctl116
[   17.300055] device: 'digi_ctl117': device_add
[   17.308088] PM: Adding info for No Bus:digi_ctl117
[   17.312056] device: 'digi_ctl118': device_add
[   17.316119] PM: Adding info for No Bus:digi_ctl118
[   17.320055] device: 'digi_ctl119': device_add
[   17.324114] PM: Adding info for No Bus:digi_ctl119
[   17.328055] device: 'digi_ctl120': device_add
[   17.336037] PM: Adding info for No Bus:digi_ctl120
[   17.340054] device: 'digi_ctl121': device_add
[   17.344116] PM: Adding info for No Bus:digi_ctl121
[   17.348064] device: 'digi_ctl122': device_add
[   17.352119] PM: Adding info for No Bus:digi_ctl122
[   17.356056] device: 'digi_ctl123': device_add
[   17.364014] PM: Adding info for No Bus:digi_ctl123
[   17.368063] device: 'digi_ctl124': device_add
[   17.372133] PM: Adding info for No Bus:digi_ctl124
[   17.376057] device: 'digi_ctl125': device_add
[   17.380120] PM: Adding info for No Bus:digi_ctl125
[   17.384055] device: 'digi_ctl126': device_add
[   17.392004] PM: Adding info for No Bus:digi_ctl126
[   17.396054] device: 'digi_ctl127': device_add
[   17.400115] PM: Adding info for No Bus:digi_ctl127
[   17.404055] device: 'digi_ctl128': device_add
[   17.408115] PM: Adding info for No Bus:digi_ctl128
[   17.412055] device: 'digi_ctl129': device_add
[   17.416128] PM: Adding info for No Bus:digi_ctl129
[   17.420056] device: 'digi_ctl130': device_add
[   17.424123] PM: Adding info for No Bus:digi_ctl130
[   17.428055] device: 'digi_ctl131': device_add
[   17.432117] PM: Adding info for No Bus:digi_ctl131
[   17.436055] device: 'digi_ctl132': device_add
[   17.440116] PM: Adding info for No Bus:digi_ctl132
[   17.444054] device: 'digi_ctl133': device_add
[   17.448116] PM: Adding info for No Bus:digi_ctl133
[   17.452054] device: 'digi_ctl134': device_add
[   17.456117] PM: Adding info for No Bus:digi_ctl134
[   17.460055] device: 'digi_ctl135': device_add
[   17.464126] PM: Adding info for No Bus:digi_ctl135
[   17.468056] device: 'digi_ctl136': device_add
[   17.472123] PM: Adding info for No Bus:digi_ctl136
[   17.476064] device: 'digi_ctl137': device_add
[   17.480124] PM: Adding info for No Bus:digi_ctl137
[   17.484056] device: 'digi_ctl138': device_add
[   17.488119] PM: Adding info for No Bus:digi_ctl138
[   17.492055] device: 'digi_ctl139': device_add
[   17.496121] PM: Adding info for No Bus:digi_ctl139
[   17.500055] device: 'digi_ctl140': device_add
[   17.504119] PM: Adding info for No Bus:digi_ctl140
[   17.508055] device: 'digi_ctl141': device_add
[   17.512128] PM: Adding info for No Bus:digi_ctl141
[   17.516057] device: 'digi_ctl142': device_add
[   17.520125] PM: Adding info for No Bus:digi_ctl142
[   17.524055] device: 'digi_ctl143': device_add
[   17.528119] PM: Adding info for No Bus:digi_ctl143
[   17.532055] device: 'digi_ctl144': device_add
[   17.536120] PM: Adding info for No Bus:digi_ctl144
[   17.540055] device: 'digi_ctl145': device_add
[   17.544121] PM: Adding info for No Bus:digi_ctl145
[   17.548066] device: 'digi_ctl146': device_add
[   17.552126] PM: Adding info for No Bus:digi_ctl146
[   17.556056] device: 'digi_ctl147': device_add
[   17.560130] PM: Adding info for No Bus:digi_ctl147
[   17.564056] device: 'digi_ctl148': device_add
[   17.568126] PM: Adding info for No Bus:digi_ctl148
[   17.572055] device: 'digi_ctl149': device_add
[   17.576122] PM: Adding info for No Bus:digi_ctl149
[   17.580071] device: 'digi_ctl150': device_add
[   17.584129] PM: Adding info for No Bus:digi_ctl150
[   17.588057] device: 'digi_ctl151': device_add
[   17.592139] PM: Adding info for No Bus:digi_ctl151
[   17.596057] device: 'digi_ctl152': device_add
[   17.600126] PM: Adding info for No Bus:digi_ctl152
[   17.604055] device: 'digi_ctl153': device_add
[   17.608132] PM: Adding info for No Bus:digi_ctl153
[   17.612057] device: 'digi_ctl154': device_add
[   17.616128] PM: Adding info for No Bus:digi_ctl154
[   17.620055] device: 'digi_ctl155': device_add
[   17.624123] PM: Adding info for No Bus:digi_ctl155
[   17.628055] device: 'digi_ctl156': device_add
[   17.632123] PM: Adding info for No Bus:digi_ctl156
[   17.636055] device: 'digi_ctl157': device_add
[   17.640122] PM: Adding info for No Bus:digi_ctl157
[   17.644055] device: 'digi_ctl158': device_add
[   17.648123] PM: Adding info for No Bus:digi_ctl158
[   17.652055] device: 'digi_ctl159': device_add
[   17.656134] PM: Adding info for No Bus:digi_ctl159
[   17.660057] device: 'digi_ctl160': device_add
[   17.664129] PM: Adding info for No Bus:digi_ctl160
[   17.668055] device: 'digi_ctl161': device_add
[   17.672124] PM: Adding info for No Bus:digi_ctl161
[   17.676055] device: 'digi_ctl162': device_add
[   17.680125] PM: Adding info for No Bus:digi_ctl162
[   17.684064] device: 'digi_ctl163': device_add
[   17.688132] PM: Adding info for No Bus:digi_ctl163
[   17.692056] device: 'digi_ctl164': device_add
[   17.696127] PM: Adding info for No Bus:digi_ctl164
[   17.700055] device: 'digi_ctl165': device_add
[   17.704137] PM: Adding info for No Bus:digi_ctl165
[   17.708057] device: 'digi_ctl166': device_add
[   17.712133] PM: Adding info for No Bus:digi_ctl166
[   17.716055] device: 'digi_ctl167': device_add
[   17.720145] PM: Adding info for No Bus:digi_ctl167
[   17.724057] device: 'digi_ctl168': device_add
[   17.728129] PM: Adding info for No Bus:digi_ctl168
[   17.732055] device: 'digi_ctl169': device_add
[   17.736128] PM: Adding info for No Bus:digi_ctl169
[   17.740055] device: 'digi_ctl170': device_add
[   17.744129] PM: Adding info for No Bus:digi_ctl170
[   17.748055] device: 'digi_ctl171': device_add
[   17.752142] PM: Adding info for No Bus:digi_ctl171
[   17.756057] device: 'digi_ctl172': device_add
[   17.760137] PM: Adding info for No Bus:digi_ctl172
[   17.764055] device: 'digi_ctl173': device_add
[   17.768131] PM: Adding info for No Bus:digi_ctl173
[   17.772055] device: 'digi_ctl174': device_add
[   17.776130] PM: Adding info for No Bus:digi_ctl174
[   17.780055] device: 'digi_ctl175': device_add
[   17.784131] PM: Adding info for No Bus:digi_ctl175
[   17.788063] device: 'digi_ctl176': device_add
[   17.792139] PM: Adding info for No Bus:digi_ctl176
[   17.796057] device: 'digi_ctl177': device_add
[   17.800142] PM: Adding info for No Bus:digi_ctl177
[   17.804065] device: 'digi_ctl178': device_add
[   17.808141] PM: Adding info for No Bus:digi_ctl178
[   17.812057] device: 'digi_ctl179': device_add
[   17.816151] PM: Adding info for No Bus:digi_ctl179
[   17.820056] device: 'digi_ctl180': device_add
[   17.824133] PM: Adding info for No Bus:digi_ctl180
[   17.828055] device: 'digi_ctl181': device_add
[   17.832132] PM: Adding info for No Bus:digi_ctl181
[   17.836055] device: 'digi_ctl182': device_add
[   17.840133] PM: Adding info for No Bus:digi_ctl182
[   17.844055] device: 'digi_ctl183': device_add
[   17.848142] PM: Adding info for No Bus:digi_ctl183
[   17.852057] device: 'digi_ctl184': device_add
[   17.856139] PM: Adding info for No Bus:digi_ctl184
[   17.860056] device: 'digi_ctl185': device_add
[   17.864133] PM: Adding info for No Bus:digi_ctl185
[   17.868055] device: 'digi_ctl186': device_add
[   17.872133] PM: Adding info for No Bus:digi_ctl186
[   17.876055] device: 'digi_ctl187': device_add
[   17.880146] PM: Adding info for No Bus:digi_ctl187
[   17.884057] device: 'digi_ctl188': device_add
[   17.888153] PM: Adding info for No Bus:digi_ctl188
[   17.892065] device: 'digi_ctl189': device_add
[   17.896150] PM: Adding info for No Bus:digi_ctl189
[   17.900057] device: 'digi_ctl190': device_add
[   17.904141] PM: Adding info for No Bus:digi_ctl190
[   17.908055] device: 'digi_ctl191': device_add
[   17.912136] PM: Adding info for No Bus:digi_ctl191
[   17.916055] device: 'digi_ctl192': device_add
[   17.920135] PM: Adding info for No Bus:digi_ctl192
[   17.924055] device: 'digi_ctl193': device_add
[   17.928135] PM: Adding info for No Bus:digi_ctl193
[   17.932055] device: 'digi_ctl194': device_add
[   17.936134] PM: Adding info for No Bus:digi_ctl194
[   17.940055] device: 'digi_ctl195': device_add
[   17.944146] PM: Adding info for No Bus:digi_ctl195
[   17.948057] device: 'digi_ctl196': device_add
[   17.952141] PM: Adding info for No Bus:digi_ctl196
[   17.956055] device: 'digi_ctl197': device_add
[   17.960135] PM: Adding info for No Bus:digi_ctl197
[   17.964055] device: 'digi_ctl198': device_add
[   17.968136] PM: Adding info for No Bus:digi_ctl198
[   17.972055] device: 'digi_ctl199': device_add
[   17.976136] PM: Adding info for No Bus:digi_ctl199
[   17.980055] device: 'digi_ctl200': device_add
[   17.984134] PM: Adding info for No Bus:digi_ctl200
[   17.988055] device: 'digi_ctl201': device_add
[   17.992145] PM: Adding info for No Bus:digi_ctl201
[   17.996065] device: 'digi_ctl202': device_add
[   18.000146] PM: Adding info for No Bus:digi_ctl202
[   18.004056] device: 'digi_ctl203': device_add
[   18.008140] PM: Adding info for No Bus:digi_ctl203
[   18.012055] device: 'digi_ctl204': device_add
[   18.016137] PM: Adding info for No Bus:digi_ctl204
[   18.020055] device: 'digi_ctl205': device_add
[   18.024137] PM: Adding info for No Bus:digi_ctl205
[   18.028065] device: 'digi_ctl206': device_add
[   18.032145] PM: Adding info for No Bus:digi_ctl206
[   18.036056] device: 'digi_ctl207': device_add
[   18.040147] PM: Adding info for No Bus:digi_ctl207
[   18.044057] device: 'digi_ctl208': device_add
[   18.048143] PM: Adding info for No Bus:digi_ctl208
[   18.052055] device: 'digi_ctl209': device_add
[   18.056139] PM: Adding info for No Bus:digi_ctl209
[   18.060066] device: 'digi_ctl210': device_add
[   18.068027] PM: Adding info for No Bus:digi_ctl210
[   18.072056] device: 'digi_ctl211': device_add
[   18.076153] PM: Adding info for No Bus:digi_ctl211
[   18.080055] device: 'digi_ctl212': device_add
[   18.084142] PM: Adding info for No Bus:digi_ctl212
[   18.088055] device: 'digi_ctl213': device_add
[   18.096075] PM: Adding info for No Bus:digi_ctl213
[   18.100057] device: 'digi_ctl214': device_add
[   18.104146] PM: Adding info for No Bus:digi_ctl214
[   18.108067] device: 'digi_ctl215': device_add
[   18.112147] PM: Adding info for No Bus:digi_ctl215
[   18.116057] device: 'digi_ctl216': device_add
[   18.124118] PM: Adding info for No Bus:digi_ctl216
[   18.128055] device: 'digi_ctl217': device_add
[   18.132139] PM: Adding info for No Bus:digi_ctl217
[   18.136055] device: 'digi_ctl218': device_add
[   18.140140] PM: Adding info for No Bus:digi_ctl218
[   18.144055] device: 'digi_ctl219': device_add
[   18.148151] PM: Adding info for No Bus:digi_ctl219
[   18.152057] device: 'digi_ctl220': device_add
[   18.156148] PM: Adding info for No Bus:digi_ctl220
[   18.160055] device: 'digi_ctl221': device_add
[   18.164141] PM: Adding info for No Bus:digi_ctl221
[   18.168055] device: 'digi_ctl222': device_add
[   18.172141] PM: Adding info for No Bus:digi_ctl222
[   18.176055] device: 'digi_ctl223': device_add
[   18.180141] PM: Adding info for No Bus:digi_ctl223
[   18.184056] device: 'digi_ctl224': device_add
[   18.188158] PM: Adding info for No Bus:digi_ctl224
[   18.192058] device: 'digi_ctl225': device_add
[   18.196155] PM: Adding info for No Bus:digi_ctl225
[   18.200058] device: 'digi_ctl226': device_add
[   18.204149] PM: Adding info for No Bus:digi_ctl226
[   18.208055] device: 'digi_ctl227': device_add
[   18.212143] PM: Adding info for No Bus:digi_ctl227
[   18.216064] device: 'digi_ctl228': device_add
[   18.220153] PM: Adding info for No Bus:digi_ctl228
[   18.224057] device: 'digi_ctl229': device_add
[   18.228144] PM: Adding info for No Bus:digi_ctl229
[   18.232055] device: 'digi_ctl230': device_add
[   18.236143] PM: Adding info for No Bus:digi_ctl230
[   18.240056] device: 'digi_ctl231': device_add
[   18.244170] PM: Adding info for No Bus:digi_ctl231
[   18.248057] device: 'digi_ctl232': device_add
[   18.252153] PM: Adding info for No Bus:digi_ctl232
[   18.256055] device: 'digi_ctl233': device_add
[   18.260147] PM: Adding info for No Bus:digi_ctl233
[   18.264067] device: 'digi_ctl234': device_add
[   18.268156] PM: Adding info for No Bus:digi_ctl234
[   18.272057] device: 'digi_ctl235': device_add
[   18.276146] PM: Adding info for No Bus:digi_ctl235
[   18.280055] device: 'digi_ctl236': device_add
[   18.284147] PM: Adding info for No Bus:digi_ctl236
[   18.288056] device: 'digi_ctl237': device_add
[   18.292156] PM: Adding info for No Bus:digi_ctl237
[   18.296057] device: 'digi_ctl238': device_add
[   18.300152] PM: Adding info for No Bus:digi_ctl238
[   18.304056] device: 'digi_ctl239': device_add
[   18.308146] PM: Adding info for No Bus:digi_ctl239
[   18.316007] device: 'digi_ctl240': device_add
[   18.320146] PM: Adding info for No Bus:digi_ctl240
[   18.324064] device: 'digi_ctl241': device_add
[   18.328154] PM: Adding info for No Bus:digi_ctl241
[   18.332056] device: 'digi_ctl242': device_add
[   18.336147] PM: Adding info for No Bus:digi_ctl242
[   18.344035] device: 'digi_ctl243': device_add
[   18.348155] PM: Adding info for No Bus:digi_ctl243
[   18.352057] device: 'digi_ctl244': device_add
[   18.356154] PM: Adding info for No Bus:digi_ctl244
[   18.360056] device: 'digi_ctl245': device_add
[   18.364148] PM: Adding info for No Bus:digi_ctl245
[   18.368055] device: 'digi_ctl246': device_add
[   18.372148] PM: Adding info for No Bus:digi_ctl246
[   18.376055] device: 'digi_ctl247': device_add
[   18.380148] PM: Adding info for No Bus:digi_ctl247
[   18.384055] device: 'digi_ctl248': device_add
[   18.388148] PM: Adding info for No Bus:digi_ctl248
[   18.392056] device: 'digi_ctl249': device_add
[   18.396158] PM: Adding info for No Bus:digi_ctl249
[   18.400058] device: 'digi_ctl250': device_add
[   18.404156] PM: Adding info for No Bus:digi_ctl250
[   18.408056] device: 'digi_ctl251': device_add
[   18.412151] PM: Adding info for No Bus:digi_ctl251
[   18.416056] device: 'digi_ctl252': device_add
[   18.420162] PM: Adding info for No Bus:digi_ctl252
[   18.424057] device: 'digi_ctl253': device_add
[   18.428160] PM: Adding info for No Bus:digi_ctl253
[   18.432065] device: 'digi_ctl254': device_add
[   18.436159] PM: Adding info for No Bus:digi_ctl254
[   18.440057] device: 'digi_ctl255': device_add
[   18.444160] PM: Adding info for No Bus:digi_ctl255
[   18.448062] initcall epca_module_init+0x0/0x39e returned 0 after 4082031 usecs
[   18.452004] calling  specialix_init_module+0x0/0x386 @ 1
[   18.456002] sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998.
[   18.460001] sx: derived from work (c) D.Gorodchanin 1994-1996.
[   18.464001] sx: DTR/RTS pin is always RTS.
[   18.468015] device: 'ttyW0': device_add
[   18.472162] PM: Adding info for No Bus:ttyW0
[   18.476056] device: 'ttyW1': device_add
[   18.480145] PM: Adding info for No Bus:ttyW1
[   18.484055] device: 'ttyW2': device_add
[   18.488167] PM: Adding info for No Bus:ttyW2
[   18.492057] device: 'ttyW3': device_add
[   18.496145] PM: Adding info for No Bus:ttyW3
[   18.500056] device: 'ttyW4': device_add
[   18.504144] PM: Adding info for No Bus:ttyW4
[   18.508065] device: 'ttyW5': device_add
[   18.512150] PM: Adding info for No Bus:ttyW5
[   18.516057] device: 'ttyW6': device_add
[   18.520156] PM: Adding info for No Bus:ttyW6
[   18.524056] device: 'ttyW7': device_add
[   18.528148] PM: Adding info for No Bus:ttyW7
[   18.532055] device: 'ttyW8': device_add
[   18.536147] PM: Adding info for No Bus:ttyW8
[   18.540055] device: 'ttyW9': device_add
[   18.544145] PM: Adding info for No Bus:ttyW9
[   18.548055] device: 'ttyW10': device_add
[   18.552146] PM: Adding info for No Bus:ttyW10
[   18.556064] device: 'ttyW11': device_add
[   18.560166] PM: Adding info for No Bus:ttyW11
[   18.564057] device: 'ttyW12': device_add
[   18.568156] PM: Adding info for No Bus:ttyW12
[   18.572056] device: 'ttyW13': device_add
[   18.576147] PM: Adding info for No Bus:ttyW13
[   18.580055] device: 'ttyW14': device_add
[   18.584147] PM: Adding info for No Bus:ttyW14
[   18.588056] device: 'ttyW15': device_add
[   18.592147] PM: Adding info for No Bus:ttyW15
[   18.596055] device: 'ttyW16': device_add
[   18.600148] PM: Adding info for No Bus:ttyW16
[   18.604055] device: 'ttyW17': device_add
[   18.608159] PM: Adding info for No Bus:ttyW17
[   18.612058] device: 'ttyW18': device_add
[   18.616157] PM: Adding info for No Bus:ttyW18
[   18.620055] device: 'ttyW19': device_add
[   18.624151] PM: Adding info for No Bus:ttyW19
[   18.628055] device: 'ttyW20': device_add
[   18.632167] PM: Adding info for No Bus:ttyW20
[   18.636057] device: 'ttyW21': device_add
[   18.640154] PM: Adding info for No Bus:ttyW21
[   18.644055] device: 'ttyW22': device_add
[   18.648153] PM: Adding info for No Bus:ttyW22
[   18.652056] device: 'ttyW23': device_add
[   18.656161] PM: Adding info for No Bus:ttyW23
[   18.660064] device: 'ttyW24': device_add
[   18.664163] PM: Adding info for No Bus:ttyW24
[   18.668056] device: 'ttyW25': device_add
[   18.672154] PM: Adding info for No Bus:ttyW25
[   18.676055] device: 'ttyW26': device_add
[   18.680154] PM: Adding info for No Bus:ttyW26
[   18.684055] device: 'ttyW27': device_add
[   18.688156] PM: Adding info for No Bus:ttyW27
[   18.692055] device: 'ttyW28': device_add
[   18.696154] PM: Adding info for No Bus:ttyW28
[   18.700055] device: 'ttyW29': device_add
[   18.704166] PM: Adding info for No Bus:ttyW29
[   18.708057] device: 'ttyW30': device_add
[   18.712161] PM: Adding info for No Bus:ttyW30
[   18.720019] device: 'ttyW31': device_add
[   18.724094] PM: Adding info for No Bus:ttyW31
[   18.728056] device: 'ttyW32': device_add
[   18.732157] PM: Adding info for No Bus:ttyW32
[   18.736066] device: 'ttyW33': device_add
[   18.740165] PM: Adding info for No Bus:ttyW33
[   18.744057] device: 'ttyW34': device_add
[   18.748157] PM: Adding info for No Bus:ttyW34
[   18.752056] device: 'ttyW35': device_add
[   18.756167] PM: Adding info for No Bus:ttyW35
[   18.760057] device: 'ttyW36': device_add
[   18.764165] PM: Adding info for No Bus:ttyW36
[   18.768066] device: 'ttyW37': device_add
[   18.772167] PM: Adding info for No Bus:ttyW37
[   18.776059] device: 'ttyW38': device_add
[   18.780173] PM: Adding info for No Bus:ttyW38
[   18.788034] device: 'ttyW39': device_add
[   18.792124] PM: Adding info for No Bus:ttyW39
[   18.796056] device: 'ttyW40': device_add
[   18.800159] PM: Adding info for No Bus:ttyW40
[   18.804056] device: 'ttyW41': device_add
[   18.808171] PM: Adding info for No Bus:ttyW41
[   18.812057] device: 'ttyW42': device_add
[   18.816192] PM: Adding info for No Bus:ttyW42
[   18.820057] device: 'ttyW43': device_add
[   18.824164] PM: Adding info for No Bus:ttyW43
[   18.828056] device: 'ttyW44': device_add
[   18.832161] PM: Adding info for No Bus:ttyW44
[   18.836056] device: 'ttyW45': device_add
[   18.840161] PM: Adding info for No Bus:ttyW45
[   18.844056] device: 'ttyW46': device_add
[   18.848165] PM: Adding info for No Bus:ttyW46
[   18.856036] device: 'ttyW47': device_add
[   18.860147] PM: Adding info for No Bus:ttyW47
[   18.864057] device: 'ttyW48': device_add
[   18.868172] PM: Adding info for No Bus:ttyW48
[   18.872056] device: 'ttyW49': device_add
[   18.876165] PM: Adding info for No Bus:ttyW49
[   18.880068] device: 'ttyW50': device_add
[   18.884174] PM: Adding info for No Bus:ttyW50
[   18.888059] device: 'ttyW51': device_add
[   18.892166] PM: Adding info for No Bus:ttyW51
[   18.896056] device: 'ttyW52': device_add
[   18.900165] PM: Adding info for No Bus:ttyW52
[   18.904056] device: 'ttyW53': device_add
[   18.908176] PM: Adding info for No Bus:ttyW53
[   18.912058] device: 'ttyW54': device_add
[   18.916185] PM: Adding info for No Bus:ttyW54
[   18.920057] device: 'ttyW55': device_add
[   18.924174] PM: Adding info for No Bus:ttyW55
[   18.928057] device: 'ttyW56': device_add
[   18.932169] PM: Adding info for No Bus:ttyW56
[   18.936068] device: 'ttyW57': device_add
[   18.940176] PM: Adding info for No Bus:ttyW57
[   18.944057] device: 'ttyW58': device_add
[   18.948167] PM: Adding info for No Bus:ttyW58
[   18.952056] device: 'ttyW59': device_add
[   18.956179] PM: Adding info for No Bus:ttyW59
[   18.960058] device: 'ttyW60': device_add
[   18.964178] PM: Adding info for No Bus:ttyW60
[   18.968066] device: 'ttyW61': device_add
[   18.972180] PM: Adding info for No Bus:ttyW61
[   18.976057] device: 'ttyW62': device_add
[   18.980169] PM: Adding info for No Bus:ttyW62
[   18.984065] device: 'ttyW63': device_add
[   18.988177] PM: Adding info for No Bus:ttyW63
[   18.992079] sx0: specialix IO8+ Board at 0x100 not found.
[   18.996012] sx1: specialix IO8+ Board at 0x180 not found.
[   19.000011] sx2: specialix IO8+ Board at 0x250 not found.
[   19.004011] sx3: specialix IO8+ Board at 0x260 not found.
[   19.008234] device: 'ttyW0': device_unregister
[   19.012002] PM: Removing info for No Bus:ttyW0
[   19.016190] device: 'ttyW0': device_create_release
[   19.020165] device: 'ttyW1': device_unregister
[   19.024002] PM: Removing info for No Bus:ttyW1
[   19.028174] device: 'ttyW1': device_create_release
[   19.032161] device: 'ttyW2': device_unregister
[   19.036002] PM: Removing info for No Bus:ttyW2
[   19.040175] device: 'ttyW2': device_create_release
[   19.044158] device: 'ttyW3': device_unregister
[   19.048003] PM: Removing info for No Bus:ttyW3
[   19.052175] device: 'ttyW3': device_create_release
[   19.056158] device: 'ttyW4': device_unregister
[   19.060002] PM: Removing info for No Bus:ttyW4
[   19.064177] device: 'ttyW4': device_create_release
[   19.068158] device: 'ttyW5': device_unregister
[   19.072002] PM: Removing info for No Bus:ttyW5
[   19.076176] device: 'ttyW5': device_create_release
[   19.080159] device: 'ttyW6': device_unregister
[   19.084002] PM: Removing info for No Bus:ttyW6
[   19.088174] device: 'ttyW6': device_create_release
[   19.092158] device: 'ttyW7': device_unregister
[   19.096002] PM: Removing info for No Bus:ttyW7
[   19.100173] device: 'ttyW7': device_create_release
[   19.104158] device: 'ttyW8': device_unregister
[   19.108002] PM: Removing info for No Bus:ttyW8
[   19.112177] device: 'ttyW8': device_create_release
[   19.116159] device: 'ttyW9': device_unregister
[   19.120002] PM: Removing info for No Bus:ttyW9
[   19.124182] device: 'ttyW9': device_create_release
[   19.128160] device: 'ttyW10': device_unregister
[   19.132002] PM: Removing info for No Bus:ttyW10
[   19.140021] device: 'ttyW10': device_create_release
[   19.144160] device: 'ttyW11': device_unregister
[   19.148002] PM: Removing info for No Bus:ttyW11
[   19.152196] device: 'ttyW11': device_create_release
[   19.156164] device: 'ttyW12': device_unregister
[   19.160002] PM: Removing info for No Bus:ttyW12
[   19.164180] device: 'ttyW12': device_create_release
[   19.168161] device: 'ttyW13': device_unregister
[   19.172002] PM: Removing info for No Bus:ttyW13
[   19.176179] device: 'ttyW13': device_create_release
[   19.180160] device: 'ttyW14': device_unregister
[   19.184002] PM: Removing info for No Bus:ttyW14
[   19.188182] device: 'ttyW14': device_create_release
[   19.192161] device: 'ttyW15': device_unregister
[   19.196002] PM: Removing info for No Bus:ttyW15
[   19.200185] device: 'ttyW15': device_create_release
[   19.204161] device: 'ttyW16': device_unregister
[   19.208003] PM: Removing info for No Bus:ttyW16
[   19.212189] device: 'ttyW16': device_create_release
[   19.216161] device: 'ttyW17': device_unregister
[   19.220002] PM: Removing info for No Bus:ttyW17
[   19.224199] device: 'ttyW17': device_create_release
[   19.228165] device: 'ttyW18': device_unregister
[   19.232002] PM: Removing info for No Bus:ttyW18
[   19.236184] device: 'ttyW18': device_create_release
[   19.240163] device: 'ttyW19': device_unregister
[   19.244002] PM: Removing info for No Bus:ttyW19
[   19.248185] device: 'ttyW19': device_create_release
[   19.252163] device: 'ttyW20': device_unregister
[   19.256002] PM: Removing info for No Bus:ttyW20
[   19.260179] device: 'ttyW20': device_create_release
[   19.264179] device: 'ttyW21': device_unregister
[   19.268002] PM: Removing info for No Bus:ttyW21
[   19.272182] device: 'ttyW21': device_create_release
[   19.276160] device: 'ttyW22': device_unregister
[   19.280002] PM: Removing info for No Bus:ttyW22
[   19.284181] device: 'ttyW22': device_create_release
[   19.288163] device: 'ttyW23': device_unregister
[   19.292002] PM: Removing info for No Bus:ttyW23
[   19.296193] device: 'ttyW23': device_create_release
[   19.300175] device: 'ttyW24': device_unregister
[   19.304002] PM: Removing info for No Bus:ttyW24
[   19.308178] device: 'ttyW24': device_create_release
[   19.312160] device: 'ttyW25': device_unregister
[   19.316002] PM: Removing info for No Bus:ttyW25
[   19.320174] device: 'ttyW25': device_create_release
[   19.324159] device: 'ttyW26': device_unregister
[   19.328003] PM: Removing info for No Bus:ttyW26
[   19.332177] device: 'ttyW26': device_create_release
[   19.336159] device: 'ttyW27': device_unregister
[   19.340002] PM: Removing info for No Bus:ttyW27
[   19.344180] device: 'ttyW27': device_create_release
[   19.348159] device: 'ttyW28': device_unregister
[   19.352002] PM: Removing info for No Bus:ttyW28
[   19.356183] device: 'ttyW28': device_create_release
[   19.360160] device: 'ttyW29': device_unregister
[   19.364002] PM: Removing info for No Bus:ttyW29
[   19.368196] device: 'ttyW29': device_create_release
[   19.372162] device: 'ttyW30': device_unregister
[   19.376002] PM: Removing info for No Bus:ttyW30
[   19.380180] device: 'ttyW30': device_create_release
[   19.384160] device: 'ttyW31': device_unregister
[   19.388002] PM: Removing info for No Bus:ttyW31
[   19.392179] device: 'ttyW31': device_create_release
[   19.396160] device: 'ttyW32': device_unregister
[   19.400002] PM: Removing info for No Bus:ttyW32
[   19.404181] device: 'ttyW32': device_create_release
[   19.408176] device: 'ttyW33': device_unregister
[   19.412002] PM: Removing info for No Bus:ttyW33
[   19.416188] device: 'ttyW33': device_create_release
[   19.420161] device: 'ttyW34': device_unregister
[   19.424002] PM: Removing info for No Bus:ttyW34
[   19.428187] device: 'ttyW34': device_create_release
[   19.432161] device: 'ttyW35': device_unregister
[   19.436002] PM: Removing info for No Bus:ttyW35
[   19.440197] device: 'ttyW35': device_create_release
[   19.444164] device: 'ttyW36': device_unregister
[   19.448003] PM: Removing info for No Bus:ttyW36
[   19.452182] device: 'ttyW36': device_create_release
[   19.456173] device: 'ttyW37': device_unregister
[   19.460002] PM: Removing info for No Bus:ttyW37
[   19.464185] device: 'ttyW37': device_create_release
[   19.468161] device: 'ttyW38': device_unregister
[   19.472002] PM: Removing info for No Bus:ttyW38
[   19.476182] device: 'ttyW38': device_create_release
[   19.480176] device: 'ttyW39': device_unregister
[   19.484002] PM: Removing info for No Bus:ttyW39
[   19.488184] device: 'ttyW39': device_create_release
[   19.492159] device: 'ttyW40': device_unregister
[   19.496002] PM: Removing info for No Bus:ttyW40
[   19.500180] device: 'ttyW40': device_create_release
[   19.504159] device: 'ttyW41': device_unregister
[   19.508002] PM: Removing info for No Bus:ttyW41
[   19.512190] device: 'ttyW41': device_create_release
[   19.516163] device: 'ttyW42': device_unregister
[   19.520002] PM: Removing info for No Bus:ttyW42
[   19.524176] device: 'ttyW42': device_create_release
[   19.528160] device: 'ttyW43': device_unregister
[   19.532002] PM: Removing info for No Bus:ttyW43
[   19.536176] device: 'ttyW43': device_create_release
[   19.540160] device: 'ttyW44': device_unregister
[   19.544003] PM: Removing info for No Bus:ttyW44
[   19.548180] device: 'ttyW44': device_create_release
[   19.552160] device: 'ttyW45': device_unregister
[   19.556002] PM: Removing info for No Bus:ttyW45
[   19.560182] device: 'ttyW45': device_create_release
[   19.564160] device: 'ttyW46': device_unregister
[   19.568003] PM: Removing info for No Bus:ttyW46
[   19.572187] device: 'ttyW46': device_create_release
[   19.576160] device: 'ttyW47': device_unregister
[   19.580002] PM: Removing info for No Bus:ttyW47
[   19.584196] device: 'ttyW47': device_create_release
[   19.588163] device: 'ttyW48': device_unregister
[   19.592002] PM: Removing info for No Bus:ttyW48
[   19.596181] device: 'ttyW48': device_create_release
[   19.600161] device: 'ttyW49': device_unregister
[   19.604002] PM: Removing info for No Bus:ttyW49
[   19.608182] device: 'ttyW49': device_create_release
[   19.612173] device: 'ttyW50': device_unregister
[   19.616002] PM: Removing info for No Bus:ttyW50
[   19.620186] device: 'ttyW50': device_create_release
[   19.624161] device: 'ttyW51': device_unregister
[   19.628002] PM: Removing info for No Bus:ttyW51
[   19.632185] device: 'ttyW51': device_create_release
[   19.636161] device: 'ttyW52': device_unregister
[   19.640002] PM: Removing info for No Bus:ttyW52
[   19.644187] device: 'ttyW52': device_create_release
[   19.648162] device: 'ttyW53': device_unregister
[   19.652002] PM: Removing info for No Bus:ttyW53
[   19.656199] device: 'ttyW53': device_create_release
[   19.660164] device: 'ttyW54': device_unregister
[   19.664002] PM: Removing info for No Bus:ttyW54
[   19.668185] device: 'ttyW54': device_create_release
[   19.672162] device: 'ttyW55': device_unregister
[   19.676002] PM: Removing info for No Bus:ttyW55
[   19.680185] device: 'ttyW55': device_create_release
[   19.684162] device: 'ttyW56': device_unregister
[   19.688003] PM: Removing info for No Bus:ttyW56
[   19.692187] device: 'ttyW56': device_create_release
[   19.696178] device: 'ttyW57': device_unregister
[   19.700002] PM: Removing info for No Bus:ttyW57
[   19.704191] device: 'ttyW57': device_create_release
[   19.708162] device: 'ttyW58': device_unregister
[   19.712002] PM: Removing info for No Bus:ttyW58
[   19.716188] device: 'ttyW58': device_create_release
[   19.720163] device: 'ttyW59': device_unregister
[   19.724002] PM: Removing info for No Bus:ttyW59
[   19.728203] device: 'ttyW59': device_create_release
[   19.732165] device: 'ttyW60': device_unregister
[   19.736002] PM: Removing info for No Bus:ttyW60
[   19.740189] device: 'ttyW60': device_create_release
[   19.744176] device: 'ttyW61': device_unregister
[   19.748002] PM: Removing info for No Bus:ttyW61
[   19.752192] device: 'ttyW61': device_create_release
[   19.756165] device: 'ttyW62': device_unregister
[   19.760002] PM: Removing info for No Bus:ttyW62
[   19.764191] device: 'ttyW62': device_create_release
[   19.768178] device: 'ttyW63': device_unregister
[   19.772002] PM: Removing info for No Bus:ttyW63
[   19.776198] device: 'ttyW63': device_create_release
[   19.780018] sx: No specialix IO8+ boards detected.
[   19.784008] initcall specialix_init_module+0x0/0x386 returned -5 after 1296875 usecs
[   19.788004] initcall specialix_init_module+0x0/0x386 returned with error code -5 
[   19.792004] calling  ip2_loadmain+0x0/0x11c0 @ 1
[   19.796002] Computone IntelliPort Plus multiport driver version 1.2.14
[   19.800031] device class 'ip2': registering
[   19.804073] initcall ip2_loadmain+0x0/0x11c0 returned 0 after 7812 usecs
[   19.808005] calling  riscom8_init_module+0x0/0x3be @ 1
[   19.812002] rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996.
[   19.816026] device: 'ttyL0': device_add
[   19.820207] PM: Adding info for No Bus:ttyL0
[   19.824058] device: 'ttyL1': device_add
[   19.828153] PM: Adding info for No Bus:ttyL1
[   19.832056] device: 'ttyL2': device_add
[   19.836147] PM: Adding info for No Bus:ttyL2
[   19.840055] device: 'ttyL3': device_add
[   19.844144] PM: Adding info for No Bus:ttyL3
[   19.848057] device: 'ttyL4': device_add
[   19.852146] PM: Adding info for No Bus:ttyL4
[   19.856055] device: 'ttyL5': device_add
[   19.860146] PM: Adding info for No Bus:ttyL5
[   19.864056] device: 'ttyL6': device_add
[   19.868146] PM: Adding info for No Bus:ttyL6
[   19.872056] device: 'ttyL7': device_add
[   19.876147] PM: Adding info for No Bus:ttyL7
[   19.880056] device: 'ttyL8': device_add
[   19.884146] PM: Adding info for No Bus:ttyL8
[   19.888057] device: 'ttyL9': device_add
[   19.892147] PM: Adding info for No Bus:ttyL9
[   19.896056] device: 'ttyL10': device_add
[   19.900147] PM: Adding info for No Bus:ttyL10
[   19.904056] device: 'ttyL11': device_add
[   19.908164] PM: Adding info for No Bus:ttyL11
[   19.912058] device: 'ttyL12': device_add
[   19.916153] PM: Adding info for No Bus:ttyL12
[   19.920056] device: 'ttyL13': device_add
[   19.924148] PM: Adding info for No Bus:ttyL13
[   19.928057] device: 'ttyL14': device_add
[   19.932148] PM: Adding info for No Bus:ttyL14
[   19.936056] device: 'ttyL15': device_add
[   19.940147] PM: Adding info for No Bus:ttyL15
[   19.944056] device: 'ttyL16': device_add
[   19.948149] PM: Adding info for No Bus:ttyL16
[   19.952056] device: 'ttyL17': device_add
[   19.956163] PM: Adding info for No Bus:ttyL17
[   19.960057] device: 'ttyL18': device_add
[   19.964151] PM: Adding info for No Bus:ttyL18
[   19.968057] device: 'ttyL19': device_add
[   19.972160] PM: Adding info for No Bus:ttyL19
[   19.976058] device: 'ttyL20': device_add
[   19.980155] PM: Adding info for No Bus:ttyL20
[   19.984056] device: 'ttyL21': device_add
[   19.988147] PM: Adding info for No Bus:ttyL21
[   19.992064] device: 'ttyL22': device_add
[   19.996156] PM: Adding info for No Bus:ttyL22
[   20.000057] device: 'ttyL23': device_add
[   20.004166] PM: Adding info for No Bus:ttyL23
[   20.008059] device: 'ttyL24': device_add
[   20.012155] PM: Adding info for No Bus:ttyL24
[   20.016056] device: 'ttyL25': device_add
[   20.020151] PM: Adding info for No Bus:ttyL25
[   20.024056] device: 'ttyL26': device_add
[   20.028151] PM: Adding info for No Bus:ttyL26
[   20.032056] device: 'ttyL27': device_add
[   20.036150] PM: Adding info for No Bus:ttyL27
[   20.040056] device: 'ttyL28': device_add
[   20.044150] PM: Adding info for No Bus:ttyL28
[   20.048057] device: 'ttyL29': device_add
[   20.052166] PM: Adding info for No Bus:ttyL29
[   20.056061] device: 'ttyL30': device_add
[   20.060158] PM: Adding info for No Bus:ttyL30
[   20.064065] device: 'ttyL31': device_add
[   20.068156] PM: Adding info for No Bus:ttyL31
[   20.072075] rc0: RISCom/8 Board at 0x220 not found.
[   20.076030] rc1: RISCom/8 Board at 0x240 not found.
[   20.080029] rc2: RISCom/8 Board at 0x250 not found.
[   20.084029] rc3: RISCom/8 Board at 0x260 not found.
[   20.088222] device: 'ttyL0': device_unregister
[   20.092002] PM: Removing info for No Bus:ttyL0
[   20.096176] device: 'ttyL0': device_create_release
[   20.104049] device: 'ttyL1': device_unregister
[   20.108002] PM: Removing info for No Bus:ttyL1
[   20.112176] device: 'ttyL1': device_create_release
[   20.116158] device: 'ttyL2': device_unregister
[   20.120002] PM: Removing info for No Bus:ttyL2
[   20.124179] device: 'ttyL2': device_create_release
[   20.132073] device: 'ttyL3': device_unregister
[   20.136002] PM: Removing info for No Bus:ttyL3
[   20.140181] device: 'ttyL3': device_create_release
[   20.144158] device: 'ttyL4': device_unregister
[   20.148002] PM: Removing info for No Bus:ttyL4
[   20.152183] device: 'ttyL4': device_create_release
[   20.160108] device: 'ttyL5': device_unregister
[   20.164002] PM: Removing info for No Bus:ttyL5
[   20.168186] device: 'ttyL5': device_create_release
[   20.172159] device: 'ttyL6': device_unregister
[   20.176002] PM: Removing info for No Bus:ttyL6
[   20.180177] device: 'ttyL6': device_create_release
[   20.188143] device: 'ttyL7': device_unregister
[   20.192002] PM: Removing info for No Bus:ttyL7
[   20.196179] device: 'ttyL7': device_create_release
[   20.200160] device: 'ttyL8': device_unregister
[   20.204002] PM: Removing info for No Bus:ttyL8
[   20.208183] device: 'ttyL8': device_create_release
[   20.212160] device: 'ttyL9': device_unregister
[   20.216002] PM: Removing info for No Bus:ttyL9
[   20.220184] device: 'ttyL9': device_create_release
[   20.224161] device: 'ttyL10': device_unregister
[   20.228002] PM: Removing info for No Bus:ttyL10
[   20.232187] device: 'ttyL10': device_create_release
[   20.236161] device: 'ttyL11': device_unregister
[   20.240002] PM: Removing info for No Bus:ttyL11
[   20.244183] device: 'ttyL11': device_create_release
[   20.248163] device: 'ttyL12': device_unregister
[   20.252002] PM: Removing info for No Bus:ttyL12
[   20.260007] device: 'ttyL12': device_create_release
[   20.264161] device: 'ttyL13': device_unregister
[   20.268002] PM: Removing info for No Bus:ttyL13
[   20.272183] device: 'ttyL13': device_create_release
[   20.276162] device: 'ttyL14': device_unregister
[   20.280002] PM: Removing info for No Bus:ttyL14
[   20.284186] device: 'ttyL14': device_create_release
[   20.288163] device: 'ttyL15': device_unregister
[   20.292002] PM: Removing info for No Bus:ttyL15
[   20.296189] device: 'ttyL15': device_create_release
[   20.300162] device: 'ttyL16': device_unregister
[   20.304002] PM: Removing info for No Bus:ttyL16
[   20.308191] device: 'ttyL16': device_create_release
[   20.312165] device: 'ttyL17': device_unregister
[   20.316002] PM: Removing info for No Bus:ttyL17
[   20.320197] device: 'ttyL17': device_create_release
[   20.324167] device: 'ttyL18': device_unregister
[   20.328003] PM: Removing info for No Bus:ttyL18
[   20.332180] device: 'ttyL18': device_create_release
[   20.336160] device: 'ttyL19': device_unregister
[   20.340002] PM: Removing info for No Bus:ttyL19
[   20.348002] device: 'ttyL19': device_create_release
[   20.352158] device: 'ttyL20': device_unregister
[   20.356002] PM: Removing info for No Bus:ttyL20
[   20.360181] device: 'ttyL20': device_create_release
[   20.364159] device: 'ttyL21': device_unregister
[   20.368003] PM: Removing info for No Bus:ttyL21
[   20.372185] device: 'ttyL21': device_create_release
[   20.376161] device: 'ttyL22': device_unregister
[   20.380002] PM: Removing info for No Bus:ttyL22
[   20.384186] device: 'ttyL22': device_create_release
[   20.388161] device: 'ttyL23': device_unregister
[   20.392002] PM: Removing info for No Bus:ttyL23
[   20.396197] device: 'ttyL23': device_create_release
[   20.400163] device: 'ttyL24': device_unregister
[   20.404002] PM: Removing info for No Bus:ttyL24
[   20.408185] device: 'ttyL24': device_create_release
[   20.412161] device: 'ttyL25': device_unregister
[   20.416002] PM: Removing info for No Bus:ttyL25
[   20.420183] device: 'ttyL25': device_create_release
[   20.424160] device: 'ttyL26': device_unregister
[   20.428002] PM: Removing info for No Bus:ttyL26
[   20.432187] device: 'ttyL26': device_create_release
[   20.436160] device: 'ttyL27': device_unregister
[   20.440002] PM: Removing info for No Bus:ttyL27
[   20.444188] device: 'ttyL27': device_create_release
[   20.448161] device: 'ttyL28': device_unregister
[   20.452002] PM: Removing info for No Bus:ttyL28
[   20.456190] device: 'ttyL28': device_create_release
[   20.460160] device: 'ttyL29': device_unregister
[   20.464002] PM: Removing info for No Bus:ttyL29
[   20.468204] device: 'ttyL29': device_create_release
[   20.472163] device: 'ttyL30': device_unregister
[   20.476002] PM: Removing info for No Bus:ttyL30
[   20.480193] device: 'ttyL30': device_create_release
[   20.484161] device: 'ttyL31': device_unregister
[   20.488003] PM: Removing info for No Bus:ttyL31
[   20.492195] device: 'ttyL31': device_create_release
[   20.496018] rc: No RISCom/8 boards detected.
[   20.500008] initcall riscom8_init_module+0x0/0x3be returned -5 after 671875 usecs
[   20.504004] initcall riscom8_init_module+0x0/0x3be returned with error code -5 
[   20.508003] calling  isicom_init+0x0/0x1b2 @ 1
[   20.512025] bus: 'pci': add driver isicom
[   20.516074] initcall isicom_init+0x0/0x1b2 returned 0 after 3906 usecs
[   20.520005] calling  synclink_init+0x0/0x20c @ 1
[   20.524002] SyncLink serial driver $Revision: 4.38 $
[   20.528004] bus: 'pci': add driver synclink
[   20.532074] device: 'ttySL0': device_add
[   20.536198] PM: Adding info for No Bus:ttySL0
[   20.540057] device: 'ttySL1': device_add
[   20.544153] PM: Adding info for No Bus:ttySL1
[   20.548055] device: 'ttySL2': device_add
[   20.552147] PM: Adding info for No Bus:ttySL2
[   20.556056] device: 'ttySL3': device_add
[   20.560150] PM: Adding info for No Bus:ttySL3
[   20.564055] device: 'ttySL4': device_add
[   20.568156] PM: Adding info for No Bus:ttySL4
[   20.572056] device: 'ttySL5': device_add
[   20.576149] PM: Adding info for No Bus:ttySL5
[   20.580057] device: 'ttySL6': device_add
[   20.584149] PM: Adding info for No Bus:ttySL6
[   20.588056] device: 'ttySL7': device_add
[   20.592150] PM: Adding info for No Bus:ttySL7
[   20.596056] device: 'ttySL8': device_add
[   20.600148] PM: Adding info for No Bus:ttySL8
[   20.604057] device: 'ttySL9': device_add
[   20.608150] PM: Adding info for No Bus:ttySL9
[   20.612056] device: 'ttySL10': device_add
[   20.616152] PM: Adding info for No Bus:ttySL10
[   20.620056] device: 'ttySL11': device_add
[   20.624150] PM: Adding info for No Bus:ttySL11
[   20.628057] device: 'ttySL12': device_add
[   20.632151] PM: Adding info for No Bus:ttySL12
[   20.636056] device: 'ttySL13': device_add
[   20.640152] PM: Adding info for No Bus:ttySL13
[   20.644056] device: 'ttySL14': device_add
[   20.648151] PM: Adding info for No Bus:ttySL14
[   20.652056] device: 'ttySL15': device_add
[   20.656163] PM: Adding info for No Bus:ttySL15
[   20.660058] device: 'ttySL16': device_add
[   20.664161] PM: Adding info for No Bus:ttySL16
[   20.668056] device: 'ttySL17': device_add
[   20.672150] PM: Adding info for No Bus:ttySL17
[   20.676057] device: 'ttySL18': device_add
[   20.680153] PM: Adding info for No Bus:ttySL18
[   20.684056] device: 'ttySL19': device_add
[   20.688154] PM: Adding info for No Bus:ttySL19
[   20.692056] device: 'ttySL20': device_add
[   20.696151] PM: Adding info for No Bus:ttySL20
[   20.700057] device: 'ttySL21': device_add
[   20.704163] PM: Adding info for No Bus:ttySL21
[   20.708058] device: 'ttySL22': device_add
[   20.712162] PM: Adding info for No Bus:ttySL22
[   20.716056] device: 'ttySL23': device_add
[   20.720154] PM: Adding info for No Bus:ttySL23
[   20.724057] device: 'ttySL24': device_add
[   20.728156] PM: Adding info for No Bus:ttySL24
[   20.732056] device: 'ttySL25': device_add
[   20.736156] PM: Adding info for No Bus:ttySL25
[   20.740056] device: 'ttySL26': device_add
[   20.744153] PM: Adding info for No Bus:ttySL26
[   20.748057] device: 'ttySL27': device_add
[   20.752165] PM: Adding info for No Bus:ttySL27
[   20.756058] device: 'ttySL28': device_add
[   20.760167] PM: Adding info for No Bus:ttySL28
[   20.764056] device: 'ttySL29': device_add
[   20.768160] PM: Adding info for No Bus:ttySL29
[   20.772057] device: 'ttySL30': device_add
[   20.776158] PM: Adding info for No Bus:ttySL30
[   20.780055] device: 'ttySL31': device_add
[   20.784159] PM: Adding info for No Bus:ttySL31
[   20.788056] device: 'ttySL32': device_add
[   20.792158] PM: Adding info for No Bus:ttySL32
[   20.796056] device: 'ttySL33': device_add
[   20.800170] PM: Adding info for No Bus:ttySL33
[   20.804058] device: 'ttySL34': device_add
[   20.808169] PM: Adding info for No Bus:ttySL34
[   20.812056] device: 'ttySL35': device_add
[   20.816187] PM: Adding info for No Bus:ttySL35
[   20.820067] device: 'ttySL36': device_add
[   20.824175] PM: Adding info for No Bus:ttySL36
[   20.828057] device: 'ttySL37': device_add
[   20.832181] PM: Adding info for No Bus:ttySL37
[   20.836058] device: 'ttySL38': device_add
[   20.844038] PM: Adding info for No Bus:ttySL38
[   20.848056] device: 'ttySL39': device_add
[   20.852172] PM: Adding info for No Bus:ttySL39
[   20.856059] device: 'ttySL40': device_add
[   20.860169] PM: Adding info for No Bus:ttySL40
[   20.864056] device: 'ttySL41': device_add
[   20.868164] PM: Adding info for No Bus:ttySL41
[   20.872056] device: 'ttySL42': device_add
[   20.876162] PM: Adding info for No Bus:ttySL42
[   20.880057] device: 'ttySL43': device_add
[   20.884163] PM: Adding info for No Bus:ttySL43
[   20.888057] device: 'ttySL44': device_add
[   20.896083] PM: Adding info for No Bus:ttySL44
[   20.900056] device: 'ttySL45': device_add
[   20.904172] PM: Adding info for No Bus:ttySL45
[   20.908058] device: 'ttySL46': device_add
[   20.912171] PM: Adding info for No Bus:ttySL46
[   20.916057] device: 'ttySL47': device_add
[   20.920164] PM: Adding info for No Bus:ttySL47
[   20.924056] device: 'ttySL48': device_add
[   20.928167] PM: Adding info for No Bus:ttySL48
[   20.932065] device: 'ttySL49': device_add
[   20.936172] PM: Adding info for No Bus:ttySL49
[   20.940059] device: 'ttySL50': device_add
[   20.948151] PM: Adding info for No Bus:ttySL50
[   20.952057] device: 'ttySL51': device_add
[   20.956175] PM: Adding info for No Bus:ttySL51
[   20.960058] device: 'ttySL52': device_add
[   20.964174] PM: Adding info for No Bus:ttySL52
[   20.968058] device: 'ttySL53': device_add
[   20.972166] PM: Adding info for No Bus:ttySL53
[   20.976057] device: 'ttySL54': device_add
[   20.980165] PM: Adding info for No Bus:ttySL54
[   20.984056] device: 'ttySL55': device_add
[   20.988181] PM: Adding info for No Bus:ttySL55
[   20.992066] device: 'ttySL56': device_add
[   20.996181] PM: Adding info for No Bus:ttySL56
[   21.000059] device: 'ttySL57': device_add
[   21.004178] PM: Adding info for No Bus:ttySL57
[   21.008059] device: 'ttySL58': device_add
[   21.012177] PM: Adding info for No Bus:ttySL58
[   21.016056] device: 'ttySL59': device_add
[   21.020168] PM: Adding info for No Bus:ttySL59
[   21.024057] device: 'ttySL60': device_add
[   21.028167] PM: Adding info for No Bus:ttySL60
[   21.032056] device: 'ttySL61': device_add
[   21.036170] PM: Adding info for No Bus:ttySL61
[   21.040065] device: 'ttySL62': device_add
[   21.044176] PM: Adding info for No Bus:ttySL62
[   21.048060] device: 'ttySL63': device_add
[   21.052181] PM: Adding info for No Bus:ttySL63
[   21.056058] device: 'ttySL64': device_add
[   21.060180] PM: Adding info for No Bus:ttySL64
[   21.064056] device: 'ttySL65': device_add
[   21.068170] PM: Adding info for No Bus:ttySL65
[   21.072057] device: 'ttySL66': device_add
[   21.076173] PM: Adding info for No Bus:ttySL66
[   21.080058] device: 'ttySL67': device_add
[   21.084174] PM: Adding info for No Bus:ttySL67
[   21.088057] device: 'ttySL68': device_add
[   21.092174] PM: Adding info for No Bus:ttySL68
[   21.096057] device: 'ttySL69': device_add
[   21.100185] PM: Adding info for No Bus:ttySL69
[   21.104058] device: 'ttySL70': device_add
[   21.108186] PM: Adding info for No Bus:ttySL70
[   21.112056] device: 'ttySL71': device_add
[   21.116173] PM: Adding info for No Bus:ttySL71
[   21.120058] device: 'ttySL72': device_add
[   21.124174] PM: Adding info for No Bus:ttySL72
[   21.128057] device: 'ttySL73': device_add
[   21.132178] PM: Adding info for No Bus:ttySL73
[   21.136068] device: 'ttySL74': device_add
[   21.140183] PM: Adding info for No Bus:ttySL74
[   21.144067] device: 'ttySL75': device_add
[   21.148196] PM: Adding info for No Bus:ttySL75
[   21.152059] device: 'ttySL76': device_add
[   21.156187] PM: Adding info for No Bus:ttySL76
[   21.160057] device: 'ttySL77': device_add
[   21.164177] PM: Adding info for No Bus:ttySL77
[   21.168059] device: 'ttySL78': device_add
[   21.172181] PM: Adding info for No Bus:ttySL78
[   21.176056] device: 'ttySL79': device_add
[   21.184060] PM: Adding info for No Bus:ttySL79
[   21.188056] device: 'ttySL80': device_add
[   21.192179] PM: Adding info for No Bus:ttySL80
[   21.196057] device: 'ttySL81': device_add
[   21.200187] PM: Adding info for No Bus:ttySL81
[   21.204060] device: 'ttySL82': device_add
[   21.208188] PM: Adding info for No Bus:ttySL82
[   21.212056] device: 'ttySL83': device_add
[   21.216182] PM: Adding info for No Bus:ttySL83
[   21.220066] device: 'ttySL84': device_add
[   21.224189] PM: Adding info for No Bus:ttySL84
[   21.232037] device: 'ttySL85': device_add
[   21.236181] PM: Adding info for No Bus:ttySL85
[   21.240058] device: 'ttySL86': device_add
[   21.244181] PM: Adding info for No Bus:ttySL86
[   21.248058] device: 'ttySL87': device_add
[   21.252194] PM: Adding info for No Bus:ttySL87
[   21.256065] device: 'ttySL88': device_add
[   21.260191] PM: Adding info for No Bus:ttySL88
[   21.264059] device: 'ttySL89': device_add
[   21.268185] PM: Adding info for No Bus:ttySL89
[   21.272056] device: 'ttySL90': device_add
[   21.276187] PM: Adding info for No Bus:ttySL90
[   21.280057] device: 'ttySL91': device_add
[   21.284183] PM: Adding info for No Bus:ttySL91
[   21.288059] device: 'ttySL92': device_add
[   21.292204] PM: Adding info for No Bus:ttySL92
[   21.296059] device: 'ttySL93': device_add
[   21.300198] PM: Adding info for No Bus:ttySL93
[   21.304058] device: 'ttySL94': device_add
[   21.308220] PM: Adding info for No Bus:ttySL94
[   21.312058] device: 'ttySL95': device_add
[   21.316198] PM: Adding info for No Bus:ttySL95
[   21.320057] device: 'ttySL96': device_add
[   21.324188] PM: Adding info for No Bus:ttySL96
[   21.328058] device: 'ttySL97': device_add
[   21.332187] PM: Adding info for No Bus:ttySL97
[   21.336059] device: 'ttySL98': device_add
[   21.340187] PM: Adding info for No Bus:ttySL98
[   21.344056] device: 'ttySL99': device_add
[   21.348197] PM: Adding info for No Bus:ttySL99
[   21.352058] device: 'ttySL100': device_add
[   21.356194] PM: Adding info for No Bus:ttySL100
[   21.360067] device: 'ttySL101': device_add
[   21.364196] PM: Adding info for No Bus:ttySL101
[   21.368059] device: 'ttySL102': device_add
[   21.372191] PM: Adding info for No Bus:ttySL102
[   21.376056] device: 'ttySL103': device_add
[   21.380188] PM: Adding info for No Bus:ttySL103
[   21.384057] device: 'ttySL104': device_add
[   21.388188] PM: Adding info for No Bus:ttySL104
[   21.392056] device: 'ttySL105': device_add
[   21.396217] PM: Adding info for No Bus:ttySL105
[   21.400059] device: 'ttySL106': device_add
[   21.408129] PM: Adding info for No Bus:ttySL106
[   21.412056] device: 'ttySL107': device_add
[   21.416190] PM: Adding info for No Bus:ttySL107
[   21.420058] device: 'ttySL108': device_add
[   21.424190] PM: Adding info for No Bus:ttySL108
[   21.428056] device: 'ttySL109': device_add
[   21.432192] PM: Adding info for No Bus:ttySL109
[   21.436057] device: 'ttySL110': device_add
[   21.440190] PM: Adding info for No Bus:ttySL110
[   21.444058] device: 'ttySL111': device_add
[   21.448202] PM: Adding info for No Bus:ttySL111
[   21.452066] device: 'ttySL112': device_add
[   21.456202] PM: Adding info for No Bus:ttySL112
[   21.460057] device: 'ttySL113': device_add
[   21.464191] PM: Adding info for No Bus:ttySL113
[   21.468066] device: 'ttySL114': device_add
[   21.472200] PM: Adding info for No Bus:ttySL114
[   21.476058] device: 'ttySL115': device_add
[   21.484038] PM: Adding info for No Bus:ttySL115
[   21.488057] device: 'ttySL116': device_add
[   21.492193] PM: Adding info for No Bus:ttySL116
[   21.496056] device: 'ttySL117': device_add
[   21.500202] PM: Adding info for No Bus:ttySL117
[   21.504060] device: 'ttySL118': device_add
[   21.508201] PM: Adding info for No Bus:ttySL118
[   21.512056] device: 'ttySL119': device_add
[   21.516195] PM: Adding info for No Bus:ttySL119
[   21.520057] device: 'ttySL120': device_add
[   21.524193] PM: Adding info for No Bus:ttySL120
[   21.528059] device: 'ttySL121': device_add
[   21.532212] PM: Adding info for No Bus:ttySL121
[   21.536058] device: 'ttySL122': device_add
[   21.540200] PM: Adding info for No Bus:ttySL122
[   21.544057] device: 'ttySL123': device_add
[   21.548205] PM: Adding info for No Bus:ttySL123
[   21.552060] device: 'ttySL124': device_add
[   21.556202] PM: Adding info for No Bus:ttySL124
[   21.560056] device: 'ttySL125': device_add
[   21.564198] PM: Adding info for No Bus:ttySL125
[   21.568058] device: 'ttySL126': device_add
[   21.572208] PM: Adding info for No Bus:ttySL126
[   21.576067] device: 'ttySL127': device_add
[   21.580208] PM: Adding info for No Bus:ttySL127
[   21.584060] SyncLink serial driver $Revision: 4.38 $, tty major#252
[   21.588008] initcall synclink_init+0x0/0x20c returned 0 after 1039062 usecs
[   21.592005] calling  synclinkmp_init+0x0/0x150 @ 1
[   21.596002] SyncLink MultiPort driver $Revision: 4.38 $
[   21.600006] bus: 'pci': add driver synclinkmp
[   21.604105] device: 'ttySLM0': device_add
[   21.608242] PM: Adding info for No Bus:ttySLM0
[   21.612062] device: 'ttySLM1': device_add
[   21.616207] PM: Adding info for No Bus:ttySLM1
[   21.620057] device: 'ttySLM2': device_add
[   21.624198] PM: Adding info for No Bus:ttySLM2
[   21.628057] device: 'ttySLM3': device_add
[   21.632193] PM: Adding info for No Bus:ttySLM3
[   21.636058] device: 'ttySLM4': device_add
[   21.640195] PM: Adding info for No Bus:ttySLM4
[   21.644057] device: 'ttySLM5': device_add
[   21.648198] PM: Adding info for No Bus:ttySLM5
[   21.652057] device: 'ttySLM6': device_add
[   21.656210] PM: Adding info for No Bus:ttySLM6
[   21.660060] device: 'ttySLM7': device_add
[   21.668179] PM: Adding info for No Bus:ttySLM7
[   21.672058] device: 'ttySLM8': device_add
[   21.676197] PM: Adding info for No Bus:ttySLM8
[   21.680057] device: 'ttySLM9': device_add
[   21.684198] PM: Adding info for No Bus:ttySLM9
[   21.688068] device: 'ttySLM10': device_add
[   21.692205] PM: Adding info for No Bus:ttySLM10
[   21.696060] device: 'ttySLM11': device_add
[   21.700198] PM: Adding info for No Bus:ttySLM11
[   21.704065] device: 'ttySLM12': device_add
[   21.712190] PM: Adding info for No Bus:ttySLM12
[   21.716059] device: 'ttySLM13': device_add
[   21.720208] PM: Adding info for No Bus:ttySLM13
[   21.724057] device: 'ttySLM14': device_add
[   21.728201] PM: Adding info for No Bus:ttySLM14
[   21.732058] device: 'ttySLM15': device_add
[   21.736200] PM: Adding info for No Bus:ttySLM15
[   21.740057] device: 'ttySLM16': device_add
[   21.744200] PM: Adding info for No Bus:ttySLM16
[   21.748056] device: 'ttySLM17': device_add
[   21.752199] PM: Adding info for No Bus:ttySLM17
[   21.756058] device: 'ttySLM18': device_add
[   21.760209] PM: Adding info for No Bus:ttySLM18
[   21.764058] device: 'ttySLM19': device_add
[   21.768224] PM: Adding info for No Bus:ttySLM19
[   21.772059] device: 'ttySLM20': device_add
[   21.776209] PM: Adding info for No Bus:ttySLM20
[   21.780058] device: 'ttySLM21': device_add
[   21.784203] PM: Adding info for No Bus:ttySLM21
[   21.788057] device: 'ttySLM22': device_add
[   21.792202] PM: Adding info for No Bus:ttySLM22
[   21.796057] device: 'ttySLM23': device_add
[   21.800201] PM: Adding info for No Bus:ttySLM23
[   21.804058] device: 'ttySLM24': device_add
[   21.808216] PM: Adding info for No Bus:ttySLM24
[   21.812066] device: 'ttySLM25': device_add
[   21.816238] PM: Adding info for No Bus:ttySLM25
[   21.820071] device: 'ttySLM26': device_add
[   21.824214] PM: Adding info for No Bus:ttySLM26
[   21.828060] device: 'ttySLM27': device_add
[   21.832204] PM: Adding info for No Bus:ttySLM27
[   21.836057] device: 'ttySLM28': device_add
[   21.840204] PM: Adding info for No Bus:ttySLM28
[   21.844057] device: 'ttySLM29': device_add
[   21.848209] PM: Adding info for No Bus:ttySLM29
[   21.852058] device: 'ttySLM30': device_add
[   21.856214] PM: Adding info for No Bus:ttySLM30
[   21.860059] device: 'ttySLM31': device_add
[   21.864216] PM: Adding info for No Bus:ttySLM31
[   21.868057] device: 'ttySLM32': device_add
[   21.872206] PM: Adding info for No Bus:ttySLM32
[   21.876058] device: 'ttySLM33': device_add
[   21.880205] PM: Adding info for No Bus:ttySLM33
[   21.884057] device: 'ttySLM34': device_add
[   21.888208] PM: Adding info for No Bus:ttySLM34
[   21.892057] device: 'ttySLM35': device_add
[   21.896204] PM: Adding info for No Bus:ttySLM35
[   21.900058] device: 'ttySLM36': device_add
[   21.904216] PM: Adding info for No Bus:ttySLM36
[   21.908059] device: 'ttySLM37': device_add
[   21.912215] PM: Adding info for No Bus:ttySLM37
[   21.916073] device: 'ttySLM38': device_add
[   21.920218] PM: Adding info for No Bus:ttySLM38
[   21.924060] device: 'ttySLM39': device_add
[   21.928209] PM: Adding info for No Bus:ttySLM39
[   21.932057] device: 'ttySLM40': device_add
[   21.936207] PM: Adding info for No Bus:ttySLM40
[   21.940057] device: 'ttySLM41': device_add
[   21.944206] PM: Adding info for No Bus:ttySLM41
[   21.948058] device: 'ttySLM42': device_add
[   21.952216] PM: Adding info for No Bus:ttySLM42
[   21.956059] device: 'ttySLM43': device_add
[   21.960216] PM: Adding info for No Bus:ttySLM43
[   21.964057] device: 'ttySLM44': device_add
[   21.968209] PM: Adding info for No Bus:ttySLM44
[   21.972059] device: 'ttySLM45': device_add
[   21.976207] PM: Adding info for No Bus:ttySLM45
[   21.980057] device: 'ttySLM46': device_add
[   21.984208] PM: Adding info for No Bus:ttySLM46
[   21.988057] device: 'ttySLM47': device_add
[   21.992228] PM: Adding info for No Bus:ttySLM47
[   22.000057] device: 'ttySLM48': device_add
[   22.004221] PM: Adding info for No Bus:ttySLM48
[   22.008062] device: 'ttySLM49': device_add
[   22.012218] PM: Adding info for No Bus:ttySLM49
[   22.016057] device: 'ttySLM50': device_add
[   22.020210] PM: Adding info for No Bus:ttySLM50
[   22.024066] device: 'ttySLM51': device_add
[   22.028218] PM: Adding info for No Bus:ttySLM51
[   22.032060] device: 'ttySLM52': device_add
[   22.036209] PM: Adding info for No Bus:ttySLM52
[   22.040057] device: 'ttySLM53': device_add
[   22.044210] PM: Adding info for No Bus:ttySLM53
[   22.048059] device: 'ttySLM54': device_add
[   22.052221] PM: Adding info for No Bus:ttySLM54
[   22.056061] device: 'ttySLM55': device_add
[   22.060220] PM: Adding info for No Bus:ttySLM55
[   22.064057] device: 'ttySLM56': device_add
[   22.068233] PM: Adding info for No Bus:ttySLM56
[   22.072059] device: 'ttySLM57': device_add
[   22.076216] PM: Adding info for No Bus:ttySLM57
[   22.080059] device: 'ttySLM58': device_add
[   22.084211] PM: Adding info for No Bus:ttySLM58
[   22.088059] device: 'ttySLM59': device_add
[   22.092213] PM: Adding info for No Bus:ttySLM59
[   22.096057] device: 'ttySLM60': device_add
[   22.100222] PM: Adding info for No Bus:ttySLM60
[   22.104063] device: 'ttySLM61': device_add
[   22.112116] PM: Adding info for No Bus:ttySLM61
[   22.116058] device: 'ttySLM62': device_add
[   22.120213] PM: Adding info for No Bus:ttySLM62
[   22.124058] device: 'ttySLM63': device_add
[   22.128216] PM: Adding info for No Bus:ttySLM63
[   22.132067] device: 'ttySLM64': device_add
[   22.136223] PM: Adding info for No Bus:ttySLM64
[   22.140060] device: 'ttySLM65': device_add
[   22.144217] PM: Adding info for No Bus:ttySLM65
[   22.148067] device: 'ttySLM66': device_add
[   22.152236] PM: Adding info for No Bus:ttySLM66
[   22.156060] device: 'ttySLM67': device_add
[   22.160227] PM: Adding info for No Bus:ttySLM67
[   22.164059] device: 'ttySLM68': device_add
[   22.168231] PM: Adding info for No Bus:ttySLM68
[   22.172059] device: 'ttySLM69': device_add
[   22.176228] PM: Adding info for No Bus:ttySLM69
[   22.184007] device: 'ttySLM70': device_add
[   22.188220] PM: Adding info for No Bus:ttySLM70
[   22.192057] device: 'ttySLM71': device_add
[   22.196217] PM: Adding info for No Bus:ttySLM71
[   22.200059] device: 'ttySLM72': device_add
[   22.204230] PM: Adding info for No Bus:ttySLM72
[   22.208061] device: 'ttySLM73': device_add
[   22.212231] PM: Adding info for No Bus:ttySLM73
[   22.216058] device: 'ttySLM74': device_add
[   22.220218] PM: Adding info for No Bus:ttySLM74
[   22.224059] device: 'ttySLM75': device_add
[   22.228219] PM: Adding info for No Bus:ttySLM75
[   22.232058] device: 'ttySLM76': device_add
[   22.236220] PM: Adding info for No Bus:ttySLM76
[   22.240067] device: 'ttySLM77': device_add
[   22.244229] PM: Adding info for No Bus:ttySLM77
[   22.248062] device: 'ttySLM78': device_add
[   22.252235] PM: Adding info for No Bus:ttySLM78
[   22.256059] device: 'ttySLM79': device_add
[   22.260233] PM: Adding info for No Bus:ttySLM79
[   22.264058] device: 'ttySLM80': device_add
[   22.268221] PM: Adding info for No Bus:ttySLM80
[   22.272059] device: 'ttySLM81': device_add
[   22.276221] PM: Adding info for No Bus:ttySLM81
[   22.280058] device: 'ttySLM82': device_add
[   22.284223] PM: Adding info for No Bus:ttySLM82
[   22.288060] device: 'ttySLM83': device_add
[   22.296138] PM: Adding info for No Bus:ttySLM83
[   22.300058] device: 'ttySLM84': device_add
[   22.304232] PM: Adding info for No Bus:ttySLM84
[   22.308061] device: 'ttySLM85': device_add
[   22.312233] PM: Adding info for No Bus:ttySLM85
[   22.316058] device: 'ttySLM86': device_add
[   22.320225] PM: Adding info for No Bus:ttySLM86
[   22.324058] device: 'ttySLM87': device_add
[   22.328225] PM: Adding info for No Bus:ttySLM87
[   22.332059] device: 'ttySLM88': device_add
[   22.336226] PM: Adding info for No Bus:ttySLM88
[   22.340058] device: 'ttySLM89': device_add
[   22.344226] PM: Adding info for No Bus:ttySLM89
[   22.348077] device: 'ttySLM90': device_add
[   22.352247] PM: Adding info for No Bus:ttySLM90
[   22.356062] device: 'ttySLM91': device_add
[   22.360241] PM: Adding info for No Bus:ttySLM91
[   22.364058] device: 'ttySLM92': device_add
[   22.368247] PM: Adding info for No Bus:ttySLM92
[   22.372060] device: 'ttySLM93': device_add
[   22.376238] PM: Adding info for No Bus:ttySLM93
[   22.380069] device: 'ttySLM94': device_add
[   22.384239] PM: Adding info for No Bus:ttySLM94
[   22.388059] device: 'ttySLM95': device_add
[   22.392230] PM: Adding info for No Bus:ttySLM95
[   22.396058] device: 'ttySLM96': device_add
[   22.404109] PM: Adding info for No Bus:ttySLM96
[   22.408060] device: 'ttySLM97': device_add
[   22.412239] PM: Adding info for No Bus:ttySLM97
[   22.416059] device: 'ttySLM98': device_add
[   22.420232] PM: Adding info for No Bus:ttySLM98
[   22.424058] device: 'ttySLM99': device_add
[   22.428232] PM: Adding info for No Bus:ttySLM99
[   22.432058] device: 'ttySLM100': device_add
[   22.436231] PM: Adding info for No Bus:ttySLM100
[   22.440059] device: 'ttySLM101': device_add
[   22.444232] PM: Adding info for No Bus:ttySLM101
[   22.448059] device: 'ttySLM102': device_add
[   22.452244] PM: Adding info for No Bus:ttySLM102
[   22.456067] device: 'ttySLM103': device_add
[   22.460244] PM: Adding info for No Bus:ttySLM103
[   22.464060] device: 'ttySLM104': device_add
[   22.468235] PM: Adding info for No Bus:ttySLM104
[   22.472058] device: 'ttySLM105': device_add
[   22.476235] PM: Adding info for No Bus:ttySLM105
[   22.480058] device: 'ttySLM106': device_add
[   22.484253] PM: Adding info for No Bus:ttySLM106
[   22.488060] device: 'ttySLM107': device_add
[   22.492247] PM: Adding info for No Bus:ttySLM107
[   22.496058] device: 'ttySLM108': device_add
[   22.500256] PM: Adding info for No Bus:ttySLM108
[   22.504060] device: 'ttySLM109': device_add
[   22.508244] PM: Adding info for No Bus:ttySLM109
[   22.512059] device: 'ttySLM110': device_add
[   22.516236] PM: Adding info for No Bus:ttySLM110
[   22.520058] device: 'ttySLM111': device_add
[   22.524256] PM: Adding info for No Bus:ttySLM111
[   22.528061] device: 'ttySLM112': device_add
[   22.532240] PM: Adding info for No Bus:ttySLM112
[   22.536059] device: 'ttySLM113': device_add
[   22.540237] PM: Adding info for No Bus:ttySLM113
[   22.544058] device: 'ttySLM114': device_add
[   22.548248] PM: Adding info for No Bus:ttySLM114
[   22.552060] device: 'ttySLM115': device_add
[   22.556247] PM: Adding info for No Bus:ttySLM115
[   22.560068] device: 'ttySLM116': device_add
[   22.564248] PM: Adding info for No Bus:ttySLM116
[   22.568060] device: 'ttySLM117': device_add
[   22.572240] PM: Adding info for No Bus:ttySLM117
[   22.576057] device: 'ttySLM118': device_add
[   22.580239] PM: Adding info for No Bus:ttySLM118
[   22.584059] device: 'ttySLM119': device_add
[   22.588238] PM: Adding info for No Bus:ttySLM119
[   22.592058] device: 'ttySLM120': device_add
[   22.596251] PM: Adding info for No Bus:ttySLM120
[   22.600060] device: 'ttySLM121': device_add
[   22.604248] PM: Adding info for No Bus:ttySLM121
[   22.608071] device: 'ttySLM122': device_add
[   22.616129] PM: Adding info for No Bus:ttySLM122
[   22.620060] device: 'ttySLM123': device_add
[   22.624242] PM: Adding info for No Bus:ttySLM123
[   22.628058] device: 'ttySLM124': device_add
[   22.632244] PM: Adding info for No Bus:ttySLM124
[   22.636058] device: 'ttySLM125': device_add
[   22.640241] PM: Adding info for No Bus:ttySLM125
[   22.644059] device: 'ttySLM126': device_add
[   22.648254] PM: Adding info for No Bus:ttySLM126
[   22.652060] device: 'ttySLM127': device_add
[   22.656252] PM: Adding info for No Bus:ttySLM127
[   22.660061] SyncLink MultiPort driver $Revision: 4.38 $, tty major#251
[   22.664006] initcall synclinkmp_init+0x0/0x150 returned 0 after 1042968 usecs
[   22.668004] calling  slgt_init+0x0/0x168 @ 1
[   22.672002] SyncLink GT
[   22.674463] SyncLink GT, tty major#250
[   22.676006] bus: 'pci': add driver synclink_gt
[   22.680069] SyncLink GT no devices found
[   22.684003] initcall slgt_init+0x0/0x168 returned 0 after 11718 usecs
[   22.688004] calling  n_hdlc_init+0x0/0x81 @ 1
[   22.692002] HDLC line discipline maxframe=4096
[   22.696002] N_HDLC line discipline registered.
[   22.700003] initcall n_hdlc_init+0x0/0x81 returned 0 after 7812 usecs
[   22.704003] calling  gsm_init+0x0/0x11b @ 1
[   22.708016] gsm_init: loaded as 249,0.
[   22.712003] initcall gsm_init+0x0/0x11b returned 0 after 3906 usecs
[   22.716003] calling  raw_init+0x0/0xc7 @ 1
[   22.720006] device class 'raw': registering
[   22.724078] device: 'rawctl': device_add
[   22.728089] PM: Adding info for No Bus:rawctl
[   22.736035] initcall raw_init+0x0/0xc7 returned 0 after 15625 usecs
[   22.740004] calling  lp_init_module+0x0/0x1f4 @ 1
[   22.744010] device class 'printer': registering
[   22.748051] lp: driver loaded but no devices found
[   22.752004] initcall lp_init_module+0x0/0x1f4 returned 0 after 7812 usecs
[   22.756003] calling  dtlk_init+0x0/0x1c5 @ 1
[   22.760025] DoubleTalk PC - not found
[   22.764013] initcall dtlk_init+0x0/0x1c5 returned -19 after 3906 usecs
[   22.768003] calling  r3964_init+0x0/0x38 @ 1
[   22.772001] r3964: Philips r3964 Driver $Revision: 1.10 $
[   22.776003] initcall r3964_init+0x0/0x38 returned 0 after 3906 usecs
[   22.780002] calling  applicom_init+0x0/0x439 @ 1
[   22.784002] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[   22.788008] ac.o: No PCI boards found.
[   22.792002] ac.o: For an ISA board you must supply memory and irq parameters.
[   22.796003] initcall applicom_init+0x0/0x439 returned -6 after 11718 usecs
[   22.800003] initcall applicom_init+0x0/0x439 returned with error code -6 
[   22.804002] calling  sonypi_init+0x0/0x79 @ 1
[   22.808002] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   22.812005] initcall sonypi_init+0x0/0x79 returned -19 after 3906 usecs
[   22.816008] calling  nvram_init+0x0/0x70 @ 1
[   22.820015] device: 'nvram': device_add
[   22.824086] PM: Adding info for No Bus:nvram
[   22.828061] Non-volatile memory driver v1.3
[   22.832004] initcall nvram_init+0x0/0x70 returned 0 after 11718 usecs
[   22.836003] calling  ppdev_init+0x0/0xac @ 1
[   22.840007] device class 'ppdev': registering
[   22.844052] ppdev: user-space parallel port driver
[   22.848005] initcall ppdev_init+0x0/0xac returned 0 after 7812 usecs
[   22.852003] calling  scx200_gpio_init+0x0/0x115 @ 1
[   22.856002] scx200_gpio: no SCx200 gpio present
[   22.860003] initcall scx200_gpio_init+0x0/0x115 returned -19 after 3906 usecs
[   22.864003] calling  pc8736x_gpio_init+0x0/0x3b7 @ 1
[   22.868007] Registering platform device 'pc8736x_gpio.0'. Parent at platform
[   22.872005] device: 'pc8736x_gpio.0': device_add
[   22.876007] bus: 'platform': add device pc8736x_gpio.0
[   22.880014] PM: Adding info for platform:pc8736x_gpio.0
[   22.884058] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[   22.888009] platform pc8736x_gpio.0: no device found
[   22.892002] PM: Removing info for platform:pc8736x_gpio.0
[   22.896023] bus: 'platform': remove device pc8736x_gpio.0
[   22.900057] initcall pc8736x_gpio_init+0x0/0x3b7 returned -19 after 31250 usecs
[   22.908003] calling  nsc_gpio_init+0x0/0x11 @ 1
[   22.912001] nsc_gpio initializing
[   22.915318] initcall nsc_gpio_init+0x0/0x11 returned 0 after 0 usecs
[   22.916003] calling  cs5535_gpio_init+0x0/0x13f @ 1
[   22.920007] cs5535_gpio: DIVIL not found
[   22.924003] initcall cs5535_gpio_init+0x0/0x13f returned -19 after 3906 usecs
[   22.928003] calling  hangcheck_init+0x0/0x9d @ 1
[   22.932003] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[   22.936001] Hangcheck: Using getrawmonotonic().
[   22.940005] initcall hangcheck_init+0x0/0x9d returned 0 after 7812 usecs
[   22.944003] calling  init_tis+0x0/0x81 @ 1
[   22.948003] bus: 'pnp': add driver tpm_tis
[   22.952057] initcall init_tis+0x0/0x81 returned 0 after 3906 usecs
[   22.956003] calling  init_nsc+0x0/0x632 @ 1
[   22.960014] initcall init_nsc+0x0/0x632 returned -19 after 0 usecs
[   22.964002] calling  init_atmel+0x0/0x15f @ 1
[   22.968005] bus: 'platform': add driver tpm_atmel
[   22.972067] bus: 'platform': remove driver tpm_atmel
[   22.976048] driver: 'tpm_atmel': driver_release
[   22.980006] initcall init_atmel+0x0/0x15f returned -19 after 11718 usecs
[   22.984003] calling  init_inf+0x0/0xf @ 1
[   22.988002] bus: 'pnp': add driver tpm_inf_pnp
[   22.992054] initcall init_inf+0x0/0xf returned 0 after 3906 usecs
[   22.996003] calling  ramoops_init+0x0/0xed @ 1
[   23.000001] ramoops: invalid size specificationinitcall ramoops_init+0x0/0xed returned -22 after 3906 usecs
[   23.008004] initcall ramoops_init+0x0/0xed returned with error code -22 
[   23.012002] calling  drm_core_init+0x0/0xfb @ 1
[   23.016017] device class 'drm': registering
[   23.020077] [drm] Initialized drm 1.1.0 20060810
[   23.024004] initcall drm_core_init+0x0/0xfb returned 0 after 7812 usecs
[   23.028003] calling  ttm_init+0x0/0x64 @ 1
[   23.032005] device: 'ttm': device_add
[   23.036020] PM: Adding info for No Bus:ttm
[   23.040048] initcall ttm_init+0x0/0x64 returned 0 after 7812 usecs
[   23.044003] calling  tdfx_init+0x0/0xf @ 1
[   23.048028] initcall tdfx_init+0x0/0xf returned 0 after 0 usecs
[   23.052003] calling  r128_init+0x0/0x19 @ 1
[   23.056135] initcall r128_init+0x0/0x19 returned 0 after 0 usecs
[   23.060003] calling  radeon_init+0x0/0xae @ 1
[   23.064003] [drm] radeon defaulting to userspace modesetting.
[   23.068463] IOAPIC[0]: Set routing entry (2-5 -> 0x41 -> IRQ 31 Mode:1 Active:1)
[   23.072006] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 31
[   23.076012] pci 0000:01:00.0: setting latency timer to 64
[   23.080142] device: 'card0': device_add
[   23.084138] PM: Adding info for No Bus:card0
[   23.088146] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[   23.092864] initcall radeon_init+0x0/0xae returned 0 after 27343 usecs
[   23.096003] calling  mga_init+0x0/0x19 @ 1
[   23.100016] initcall mga_init+0x0/0x19 returned 0 after 0 usecs
[   23.104003] calling  savage_init+0x0/0x19 @ 1
[   23.108069] initcall savage_init+0x0/0x19 returned 0 after 0 usecs
[   23.112003] calling  via_init+0x0/0x1e @ 1
[   23.116032] initcall via_init+0x0/0x1e returned 0 after 0 usecs
[   23.120003] calling  serial8250_init+0x0/0x14b @ 1
[   23.124003] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   23.128037] Registering platform device 'serial8250'. Parent at platform
[   23.132003] device: 'serial8250': device_add
[   23.136007] bus: 'platform': add device serial8250
[   23.140013] PM: Adding info for platform:serial8250
[   23.144121] async_waiting @ 1
[   23.148003] async_continuing @ 1 after 0 usec
[   23.280258] async_waiting @ 1
[   23.283228] async_continuing @ 1 after 0 usec
[   23.412298] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   23.416008] device: 'ttyS0': device_add
[   23.420417] PM: Adding info for No Bus:ttyS0
[   23.424090] device: 'ttyS1': device_add
[   23.428269] PM: Adding info for No Bus:ttyS1
[   23.432077] device: 'ttyS2': device_add
[   23.436272] PM: Adding info for No Bus:ttyS2
[   23.440084] device: 'ttyS3': device_add
[   23.444256] PM: Adding info for No Bus:ttyS3
[   23.448067] bus: 'platform': add driver serial8250
[   23.452014] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
[   23.456002] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[   23.460008] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[   23.464002] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[   23.468058] initcall serial8250_init+0x0/0x14b returned 0 after 335937 usecs
[   23.472004] calling  serial8250_pnp_init+0x0/0xf @ 1
[   23.476003] bus: 'pnp': add driver serial
[   23.480057] initcall serial8250_pnp_init+0x0/0xf returned 0 after 3906 usecs
[   23.484004] calling  jsm_init_module+0x0/0x3a @ 1
[   23.488067] bus: 'pci': add driver jsm
[   23.492082] initcall jsm_init_module+0x0/0x3a returned 0 after 3906 usecs
[   23.496004] calling  timbuart_init+0x0/0xf @ 1
[   23.500004] bus: 'platform': add driver timb-uart
[   23.504056] initcall timbuart_init+0x0/0xf returned 0 after 3906 usecs
[   23.508004] calling  parport_default_proc_register+0x0/0x7 @ 1
[   23.512003] initcall parport_default_proc_register+0x0/0x7 returned 0 after 0 usecs
[   23.516003] calling  parport_ax88796_init+0x0/0xf @ 1
[   23.520003] bus: 'platform': add driver ax88796-pp
[   23.524056] initcall parport_ax88796_init+0x0/0xf returned 0 after 3906 usecs
[   23.528004] calling  isa_bus_init+0x0/0x33 @ 1
[   23.532074] bus: 'isa': registered
[   23.536005] device: 'isa': device_add
[   23.540009] PM: Adding info for No Bus:isa
[   23.544005] initcall isa_bus_init+0x0/0x33 returned 0 after 11718 usecs
[   23.548004] calling  topology_sysfs_init+0x0/0x5e @ 1
[   23.552027] initcall topology_sysfs_init+0x0/0x5e returned 0 after 0 usecs
[   23.556003] calling  brd_init+0x0/0x14e @ 1
[   23.560368] device: 'ram0': device_add
[   23.564033] PM: Adding info for No Bus:ram0
[   23.568113] device: '1:0': device_add
[   23.572015] PM: Adding info for No Bus:1:0
[   23.576073] device: 'ram1': device_add
[   23.580039] PM: Adding info for No Bus:ram1
[   23.584088] device: '1:1': device_add
[   23.588014] PM: Adding info for No Bus:1:1
[   23.592072] device: 'ram2': device_add
[   23.596038] PM: Adding info for No Bus:ram2
[   23.600097] device: '1:2': device_add
[   23.604024] PM: Adding info for No Bus:1:2
[   23.608063] device: 'ram3': device_add
[   23.612029] PM: Adding info for No Bus:ram3
[   23.616095] device: '1:3': device_add
[   23.620014] PM: Adding info for No Bus:1:3
[   23.624069] device: 'ram4': device_add
[   23.628031] PM: Adding info for No Bus:ram4
[   23.632096] device: '1:4': device_add
[   23.636014] PM: Adding info for No Bus:1:4
[   23.640074] device: 'ram5': device_add
[   23.644030] PM: Adding info for No Bus:ram5
[   23.648107] device: '1:5': device_add
[   23.652015] PM: Adding info for No Bus:1:5
[   23.656076] device: 'ram6': device_add
[   23.660039] PM: Adding info for No Bus:ram6
[   23.664088] device: '1:6': device_add
[   23.668017] PM: Adding info for No Bus:1:6
[   23.672060] device: 'ram7': device_add
[   23.676039] PM: Adding info for No Bus:ram7
[   23.680087] device: '1:7': device_add
[   23.684014] PM: Adding info for No Bus:1:7
[   23.688070] device: 'ram8': device_add
[   23.692027] PM: Adding info for No Bus:ram8
[   23.696087] device: '1:8': device_add
[   23.699763] PM: Adding info for No Bus:1:8
[   23.700062] device: 'ram9': device_add
[   23.703837] PM: Adding info for No Bus:ram9
[   23.704095] device: '1:9': device_add
[   23.707761] PM: Adding info for No Bus:1:9
[   23.712018] device: 'ram10': device_add
[   23.715878] PM: Adding info for No Bus:ram10
[   23.716104] device: '1:10': device_add
[   23.720015] PM: Adding info for No Bus:1:10
[   23.724069] device: 'ram11': device_add
[   23.728040] PM: Adding info for No Bus:ram11
[   23.732087] device: '1:11': device_add
[   23.736015] PM: Adding info for No Bus:1:11
[   23.740060] device: 'ram12': device_add
[   23.744039] PM: Adding info for No Bus:ram12
[   23.748088] device: '1:12': device_add
[   23.752014] PM: Adding info for No Bus:1:12
[   23.756059] device: 'ram13': device_add
[   23.760040] PM: Adding info for No Bus:ram13
[   23.764087] device: '1:13': device_add
[   23.768024] PM: Adding info for No Bus:1:13
[   23.772072] device: 'ram14': device_add
[   23.776066] PM: Adding info for No Bus:ram14
[   23.780103] device: '1:14': device_add
[   23.784015] PM: Adding info for No Bus:1:14
[   23.788069] device: 'ram15': device_add
[   23.792031] PM: Adding info for No Bus:ram15
[   23.796102] device: '1:15': device_add
[   23.800015] PM: Adding info for No Bus:1:15
[   23.804093] brd: module loaded
[   23.808006] initcall brd_init+0x0/0x14e returned 0 after 242187 usecs
[   23.812003] calling  loop_init+0x0/0x167 @ 1
[   23.816242] device: 'loop0': device_add
[   23.820031] PM: Adding info for No Bus:loop0
[   23.824095] device: '7:0': device_add
[   23.828014] PM: Adding info for No Bus:7:0
[   23.832061] device: 'loop1': device_add
[   23.836038] PM: Adding info for No Bus:loop1
[   23.840085] device: '7:1': device_add
[   23.844015] PM: Adding info for No Bus:7:1
[   23.848067] device: 'loop2': device_add
[   23.852040] PM: Adding info for No Bus:loop2
[   23.856086] device: '7:2': device_add
[   23.860023] PM: Adding info for No Bus:7:2
[   23.864060] device: 'loop3': device_add
[   23.868031] PM: Adding info for No Bus:loop3
[   23.872093] device: '7:3': device_add
[   23.876015] PM: Adding info for No Bus:7:3
[   23.880061] device: 'loop4': device_add
[   23.884030] PM: Adding info for No Bus:loop4
[   23.892029] device: '7:4': device_add
[   23.895700] PM: Adding info for No Bus:7:4
[   23.896059] device: 'loop5': device_add
[   23.900041] PM: Adding info for No Bus:loop5
[   23.908094] device: '7:5': device_add
[   23.911767] PM: Adding info for No Bus:7:5
[   23.912067] device: 'loop6': device_add
[   23.916040] PM: Adding info for No Bus:loop6
[   23.920085] device: '7:6': device_add
[   23.923753] PM: Adding info for No Bus:7:6
[   23.924071] device: 'loop7': device_add
[   23.928041] PM: Adding info for No Bus:loop7
[   23.932099] device: '7:7': device_add
[   23.935777] PM: Adding info for No Bus:7:7
[   23.936061] loop: module loaded
[   23.939205] initcall loop_init+0x0/0x167 returned 0 after 117187 usecs
[   23.940004] calling  cpqarray_init+0x0/0x235 @ 1
[   23.944002] Compaq SMART2 Driver (v 2.6.0)
[   23.948006] bus: 'pci': add driver cpqarray
[   23.952083] bus: 'pci': remove driver cpqarray
[   23.956052] driver: 'cpqarray': driver_release
[   23.960008] initcall cpqarray_init+0x0/0x235 returned -19 after 15625 usecs
[   23.964004] calling  cciss_init+0x0/0x81 @ 1
[   23.968002] HP CISS Driver (v 3.6.20)
[   23.972063] bus: 'cciss': registered
[   23.976043] bus: 'pci': add driver cciss
[   23.980090] initcall cciss_init+0x0/0x81 returned 0 after 11718 usecs
[   23.988003] calling  pkt_init+0x0/0x1ca @ 1
[   23.992052] device class 'pktcdvd': registering
[   23.996084] device: 'pktcdvd': device_add
[   24.000217] PM: Adding info for No Bus:pktcdvd
[   24.004072] initcall pkt_init+0x0/0x1ca returned 0 after 11718 usecs
[   24.012003] calling  nbd_init+0x0/0x2a7 @ 1
[   24.016990] nbd: registered device at major 43
[   24.020016] device: 'nbd0': device_add
[   24.024048] PM: Adding info for No Bus:nbd0
[   24.028111] device: '43:0': device_add
[   24.032026] PM: Adding info for No Bus:43:0
[   24.036076] device: 'nbd1': device_add
[   24.040032] PM: Adding info for No Bus:nbd1
[   24.044112] device: '43:1': device_add
[   24.048015] PM: Adding info for No Bus:43:1
[   24.052061] device: 'nbd2': device_add
[   24.056039] PM: Adding info for No Bus:nbd2
[   24.060110] device: '43:2': device_add
[   24.064024] PM: Adding info for No Bus:43:2
[   24.068079] device: 'nbd3': device_add
[   24.072032] PM: Adding info for No Bus:nbd3
[   24.076112] device: '43:3': device_add
[   24.080015] PM: Adding info for No Bus:43:3
[   24.084060] device: 'nbd4': device_add
[   24.088039] PM: Adding info for No Bus:nbd4
[   24.092103] device: '43:4': device_add
[   24.096023] PM: Adding info for No Bus:43:4
[   24.100084] device: 'nbd5': device_add
[   24.104032] PM: Adding info for No Bus:nbd5
[   24.108125] device: '43:5': device_add
[   24.112016] PM: Adding info for No Bus:43:5
[   24.116063] device: 'nbd6': device_add
[   24.120032] PM: Adding info for No Bus:nbd6
[   24.124114] device: '43:6': device_add
[   24.128015] PM: Adding info for No Bus:43:6
[   24.132077] device: 'nbd7': device_add
[   24.136032] PM: Adding info for No Bus:nbd7
[   24.140154] device: '43:7': device_add
[   24.144016] PM: Adding info for No Bus:43:7
[   24.148069] device: 'nbd8': device_add
[   24.152031] PM: Adding info for No Bus:nbd8
[   24.156113] device: '43:8': device_add
[   24.160015] PM: Adding info for No Bus:43:8
[   24.164061] device: 'nbd9': device_add
[   24.168040] PM: Adding info for No Bus:nbd9
[   24.172113] device: '43:9': device_add
[   24.176016] PM: Adding info for No Bus:43:9
[   24.180061] device: 'nbd10': device_add
[   24.184042] PM: Adding info for No Bus:nbd10
[   24.188113] device: '43:10': device_add
[   24.192016] PM: Adding info for No Bus:43:10
[   24.196062] device: 'nbd11': device_add
[   24.200040] PM: Adding info for No Bus:nbd11
[   24.204113] device: '43:11': device_add
[   24.208016] PM: Adding info for No Bus:43:11
[   24.216069] device: 'nbd12': device_add
[   24.219934] PM: Adding info for No Bus:nbd12
[   24.224113] device: '43:12': device_add
[   24.228019] PM: Adding info for No Bus:43:12
[   24.232068] device: 'nbd13': device_add
[   24.236041] PM: Adding info for No Bus:nbd13
[   24.240113] device: '43:13': device_add
[   24.244016] PM: Adding info for No Bus:43:13
[   24.248071] device: 'nbd14': device_add
[   24.252033] PM: Adding info for No Bus:nbd14
[   24.256123] device: '43:14': device_add
[   24.260016] PM: Adding info for No Bus:43:14
[   24.264062] device: 'nbd15': device_add
[   24.268040] PM: Adding info for No Bus:nbd15
[   24.272120] device: '43:15': device_add
[   24.276016] PM: Adding info for No Bus:43:15
[   24.280061] initcall nbd_init+0x0/0x2a7 returned 0 after 257812 usecs
[   24.288004] calling  init_cryptoloop+0x0/0x26 @ 1
[   24.292003] initcall init_cryptoloop+0x0/0x26 returned 0 after 0 usecs
[   24.296003] calling  tifm_7xx1_init+0x0/0x16 @ 1
[   24.304007] bus: 'pci': add driver tifm_7xx1
[   24.308070] initcall tifm_7xx1_init+0x0/0x16 returned 0 after 3906 usecs
[   24.312003] calling  phantom_init+0x0/0xe1 @ 1
[   24.316003] device class 'phantom': registering
[   24.324059] bus: 'pci': add driver phantom
[   24.328060] Phantom Linux Driver, version n0.9.8, init OK
[   24.332003] initcall phantom_init+0x0/0xe1 returned 0 after 15625 usecs
[   24.340003] calling  ioc4_init+0x0/0x16 @ 1
[   24.344003] bus: 'pci': add driver IOC4
[   24.348060] initcall ioc4_init+0x0/0x16 returned 0 after 3906 usecs
[   24.352003] calling  enclosure_init+0x0/0x14 @ 1
[   24.356002] device class 'enclosure': registering
[   24.364052] initcall enclosure_init+0x0/0x14 returned 0 after 7812 usecs
[   24.368003] calling  init_kgdbts+0x0/0x15 @ 1
[   24.372003] initcall init_kgdbts+0x0/0x15 returned 0 after 0 usecs
[   24.380003] calling  cs5535_mfgpt_init+0x0/0x1b2 @ 1
[   24.384018] initcall cs5535_mfgpt_init+0x0/0x1b2 returned -19 after 0 usecs
[   24.392003] calling  isl29003_init+0x0/0x11 @ 1
[   24.396004] bus: 'i2c': add driver isl29003
[   24.400055] i2c-core: driver [isl29003] registered
[   24.404004] initcall isl29003_init+0x0/0x11 returned 0 after 7812 usecs
[   24.412003] calling  c2port_init+0x0/0x45 @ 1
[   24.416002] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[   24.424011] device class 'c2port': registering
[   24.428053] initcall c2port_init+0x0/0x45 returned 0 after 11718 usecs
[   24.436003] calling  duramar2150_c2port_init+0x0/0x61 @ 1
[   24.440024] device: 'c2port0': device_add
[   24.444034] PM: Adding info for No Bus:c2port0
[   24.448050] c2port c2port0: C2 port uc added
[   24.452003] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[   24.460004] initcall duramar2150_c2port_init+0x0/0x61 returned 0 after 19531 usecs
[   24.468003] calling  at24_init+0x0/0x2a @ 1
[   24.472003] bus: 'i2c': add driver at24
[   24.476052] i2c-core: driver [at24] registered
[   24.480004] initcall at24_init+0x0/0x2a returned 0 after 7812 usecs
[   24.488004] calling  cb710_init_module+0x0/0x16 @ 1
[   24.492004] bus: 'pci': add driver cb710
[   24.496061] initcall cb710_init_module+0x0/0x16 returned 0 after 3906 usecs
[   24.504003] calling  vmballoon_init+0x0/0x166 @ 1
[   24.508003] initcall vmballoon_init+0x0/0x166 returned -19 after 0 usecs
[   24.512003] calling  sm501_base_init+0x0/0x20 @ 1
[   24.520005] bus: 'platform': add driver sm501
[   24.524061] bus: 'pci': add driver sm501
[   24.528060] initcall sm501_base_init+0x0/0x20 returned 0 after 7812 usecs
[   24.532003] calling  wm8994_i2c_init+0x0/0x2a @ 1
[   24.540002] bus: 'i2c': add driver wm8994
[   24.544053] i2c-core: driver [wm8994] registered
[   24.548004] initcall wm8994_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[   24.552003] calling  timberdale_init+0x0/0x45 @ 1
[   24.560004] bus: 'pci': add driver timberdale
[   24.564068] Driver for timberdale has been successfully registered.
[   24.568004] initcall timberdale_init+0x0/0x45 returned 0 after 7812 usecs
[   24.576003] calling  lpc_sch_init+0x0/0x16 @ 1
[   24.580004] bus: 'pci': add driver lpc_sch
[   24.584062] initcall lpc_sch_init+0x0/0x16 returned 0 after 3906 usecs
[   24.592003] calling  rdc321x_sb_init+0x0/0x16 @ 1
[   24.596003] bus: 'pci': add driver RDC321x Southbridge
[   24.600062] initcall rdc321x_sb_init+0x0/0x16 returned 0 after 3906 usecs
[   24.608003] calling  scsi_tgt_init+0x0/0x72 @ 1
[   24.612198] device: 'tgt': device_add
[   24.616219] PM: Adding info for No Bus:tgt
[   24.620064] initcall scsi_tgt_init+0x0/0x72 returned 0 after 7812 usecs
[   24.628003] calling  raid_init+0x0/0xf @ 1
[   24.632002] device class 'raid_devices': registering
[   24.636057] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   24.644003] calling  spi_transport_init+0x0/0x65 @ 1
[   24.648006] device class 'spi_transport': registering
[   24.652051] device class 'spi_host': registering
[   24.656052] initcall spi_transport_init+0x0/0x65 returned 0 after 7812 usecs
[   24.664003] calling  fc_transport_init+0x0/0x71 @ 1
[   24.668002] device class 'fc_host': registering
[   24.672050] device class 'fc_vports': registering
[   24.680050] device class 'fc_remote_ports': registering
[   24.684050] device class 'fc_transport': registering
[   24.688051] initcall fc_transport_init+0x0/0x71 returned 0 after 19531 usecs
[   24.696004] calling  iscsi_transport_init+0x0/0x11f @ 1
[   24.700002] Loading iSCSI transport class v2.0-870.
[   24.704002] device class 'iscsi_transport': registering
[   24.712061] device class 'iscsi_endpoint': registering
[   24.716050] device class 'iscsi_host': registering
[   24.720050] device class 'iscsi_connection': registering
[   24.728050] device class 'iscsi_session': registering
[   24.732078] initcall iscsi_transport_init+0x0/0x11f returned 0 after 31250 usecs
[   24.736004] calling  sas_transport_init+0x0/0x9f @ 1
[   24.740002] device class 'sas_host': registering
[   24.744063] device class 'sas_phy': registering
[   24.748052] device class 'sas_port': registering
[   24.752051] device class 'sas_device': registering
[   24.756050] device class 'sas_end_device': registering
[   24.760059] device class 'sas_expander': registering
[   24.764052] initcall sas_transport_init+0x0/0x9f returned 0 after 23437 usecs
[   24.768004] calling  sas_class_init+0x0/0x2c @ 1
[   24.772184] initcall sas_class_init+0x0/0x2c returned 0 after 0 usecs
[   24.776003] calling  scsi_dh_init+0x0/0x34 @ 1
[   24.780005] initcall scsi_dh_init+0x0/0x34 returned 0 after 0 usecs
[   24.784003] calling  clariion_init+0x0/0x2c @ 1
[   24.788002] emc: device handler registered
[   24.792004] initcall clariion_init+0x0/0x2c returned 0 after 3906 usecs
[   24.796003] calling  alua_init+0x0/0x2c @ 1
[   24.800002] alua: device handler registered
[   24.804004] initcall alua_init+0x0/0x2c returned 0 after 3906 usecs
[   24.808003] calling  libfc_init+0x0/0x39 @ 1
[   24.812314] initcall libfc_init+0x0/0x39 returned 0 after 0 usecs
[   24.816006] calling  fcoe_init+0x0/0x164 @ 1
[   24.820051] initcall fcoe_init+0x0/0x164 returned 0 after 0 usecs
[   24.824003] calling  fnic_init_module+0x0/0x1a7 @ 1
[   24.828003] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[   24.832465] bus: 'pci': add driver fnic
[   24.836083] initcall fnic_init_module+0x0/0x1a7 returned 0 after 7812 usecs
[   24.844004] calling  iscsi_sw_tcp_init+0x0/0x3a @ 1
[   24.848009] device: 'tcp': device_add
[   24.852011] PM: Adding info for No Bus:tcp
[   24.856051] iscsi: registered transport (tcp)
[   24.860004] initcall iscsi_sw_tcp_init+0x0/0x3a returned 0 after 11718 usecs
[   24.868003] calling  advansys_init+0x0/0x5e @ 1
[   24.872002] bus: 'isa': add driver advansys
[   24.876057] device: 'advansys.0': device_add
[   24.880006] bus: 'isa': add device advansys.0
[   24.884011] PM: Adding info for isa:advansys.0
[   24.888047] bus: 'isa': driver_probe_device: matched device advansys.0 with driver advansys
[   24.896002] bus: 'isa': really_probe: probing driver advansys with device advansys.0
[   24.904032] device: 'advansys.1': device_add
[   24.908006] bus: 'isa': add device advansys.1
[   24.912021] PM: Adding info for isa:advansys.1
[   24.920047] bus: 'isa': driver_probe_device: matched device advansys.1 with driver advansys
[   24.928002] bus: 'isa': really_probe: probing driver advansys with device advansys.1
[   24.936022] device: 'advansys.2': device_add
[   24.940005] bus: 'isa': add device advansys.2
[   24.944031] PM: Adding info for isa:advansys.2
[   24.948045] bus: 'isa': driver_probe_device: matched device advansys.2 with driver advansys
[   24.956002] bus: 'isa': really_probe: probing driver advansys with device advansys.2
[   24.964022] device: 'advansys.3': device_add
[   24.968008] bus: 'isa': add device advansys.3
[   24.972016] PM: Adding info for isa:advansys.3
[   24.976046] bus: 'isa': driver_probe_device: matched device advansys.3 with driver advansys
[   24.984002] bus: 'isa': really_probe: probing driver advansys with device advansys.3
[   24.992021] device: 'advansys.4': device_add
[   24.996007] bus: 'isa': add device advansys.4
[   25.000019] PM: Adding info for isa:advansys.4
[   25.004047] bus: 'isa': driver_probe_device: matched device advansys.4 with driver advansys
[   25.016002] bus: 'isa': really_probe: probing driver advansys with device advansys.4
[   25.020023] device: 'advansys.5': device_add
[   25.028006] bus: 'isa': add device advansys.5
[   25.032011] PM: Adding info for isa:advansys.5
[   25.036045] bus: 'isa': driver_probe_device: matched device advansys.5 with driver advansys
[   25.044002] bus: 'isa': really_probe: probing driver advansys with device advansys.5
[   25.052021] device: 'advansys.6': device_add
[   25.056006] bus: 'isa': add device advansys.6
[   25.060011] PM: Adding info for isa:advansys.6
[   25.064045] bus: 'isa': driver_probe_device: matched device advansys.6 with driver advansys
[   25.072002] bus: 'isa': really_probe: probing driver advansys with device advansys.6
[   25.080020] device: 'advansys.7': device_add
[   25.084007] bus: 'isa': add device advansys.7
[   25.088011] PM: Adding info for isa:advansys.7
[   25.092045] bus: 'isa': driver_probe_device: matched device advansys.7 with driver advansys
[   25.100002] bus: 'isa': really_probe: probing driver advansys with device advansys.7
[   25.108027] device: 'advansys.8': device_add
[   25.112006] bus: 'isa': add device advansys.8
[   25.120021] PM: Adding info for isa:advansys.8
[   25.124047] bus: 'isa': driver_probe_device: matched device advansys.8 with driver advansys
[   25.132002] bus: 'isa': really_probe: probing driver advansys with device advansys.8
[   25.140022] device: 'advansys.9': device_add
[   25.144006] bus: 'isa': add device advansys.9
[   25.148011] PM: Adding info for isa:advansys.9
[   25.152045] bus: 'isa': driver_probe_device: matched device advansys.9 with driver advansys
[   25.160002] bus: 'isa': really_probe: probing driver advansys with device advansys.9
[   25.168020] device: 'advansys.10': device_add
[   25.172006] bus: 'isa': add device advansys.10
[   25.176020] PM: Adding info for isa:advansys.10
[   25.180047] bus: 'isa': driver_probe_device: matched device advansys.10 with driver advansys
[   25.188002] bus: 'isa': really_probe: probing driver advansys with device advansys.10
[   25.196021] bus: 'isa': add driver advansys_vlb
[   25.204057] device: 'advansys_vlb.0': device_add
[   25.208006] bus: 'isa': add device advansys_vlb.0
[   25.212011] PM: Adding info for isa:advansys_vlb.0
[   25.216046] bus: 'isa': driver_probe_device: matched device advansys_vlb.0 with driver advansys_vlb
[   25.224002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.0
[   25.232022] device: 'advansys_vlb.1': device_add
[   25.240006] bus: 'isa': add device advansys_vlb.1
[   25.244011] PM: Adding info for isa:advansys_vlb.1
[   25.248046] bus: 'isa': driver_probe_device: matched device advansys_vlb.1 with driver advansys_vlb
[   25.256002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.1
[   25.264021] device: 'advansys_vlb.2': device_add
[   25.272006] bus: 'isa': add device advansys_vlb.2
[   25.276011] PM: Adding info for isa:advansys_vlb.2
[   25.280046] bus: 'isa': driver_probe_device: matched device advansys_vlb.2 with driver advansys_vlb
[   25.288002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.2
[   25.296020] device: 'advansys_vlb.3': device_add
[   25.300006] bus: 'isa': add device advansys_vlb.3
[   25.308011] PM: Adding info for isa:advansys_vlb.3
[   25.312046] bus: 'isa': driver_probe_device: matched device advansys_vlb.3 with driver advansys_vlb
[   25.320002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.3
[   25.328019] device: 'advansys_vlb.4': device_add
[   25.332006] bus: 'isa': add device advansys_vlb.4
[   25.340021] PM: Adding info for isa:advansys_vlb.4
[   25.344047] bus: 'isa': driver_probe_device: matched device advansys_vlb.4 with driver advansys_vlb
[   25.352002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.4
[   25.360023] device: 'advansys_vlb.5': device_add
[   25.364006] bus: 'isa': add device advansys_vlb.5
[   25.368011] PM: Adding info for isa:advansys_vlb.5
[   25.376046] bus: 'isa': driver_probe_device: matched device advansys_vlb.5 with driver advansys_vlb
[   25.384002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.5
[   25.392034] device: 'advansys_vlb.6': device_add
[   25.396007] bus: 'isa': add device advansys_vlb.6
[   25.400011] PM: Adding info for isa:advansys_vlb.6
[   25.408046] bus: 'isa': driver_probe_device: matched device advansys_vlb.6 with driver advansys_vlb
[   25.416002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.6
[   25.424023] device: 'advansys_vlb.7': device_add
[   25.428006] bus: 'isa': add device advansys_vlb.7
[   25.432011] PM: Adding info for isa:advansys_vlb.7
[   25.440028] bus: 'isa': driver_probe_device: matched device advansys_vlb.7 with driver advansys_vlb
[   25.448002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.7
[   25.456022] device: 'advansys_vlb.8': device_add
[   25.460006] bus: 'isa': add device advansys_vlb.8
[   25.464012] PM: Adding info for isa:advansys_vlb.8
[   25.468046] bus: 'isa': driver_probe_device: matched device advansys_vlb.8 with driver advansys_vlb
[   25.480002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.8
[   25.488021] device: 'advansys_vlb.9': device_add
[   25.492006] bus: 'isa': add device advansys_vlb.9
[   25.496011] PM: Adding info for isa:advansys_vlb.9
[   25.500046] bus: 'isa': driver_probe_device: matched device advansys_vlb.9 with driver advansys_vlb
[   25.512002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.9
[   25.520028] device: 'advansys_vlb.10': device_add
[   25.524007] bus: 'isa': add device advansys_vlb.10
[   25.528020] PM: Adding info for isa:advansys_vlb.10
[   25.532047] bus: 'isa': driver_probe_device: matched device advansys_vlb.10 with driver advansys_vlb
[   25.544002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.10
[   25.552024] bus: 'pci': add driver advansys
[   25.556063] initcall advansys_init+0x0/0x5e returned 0 after 667968 usecs
[   25.564003] calling  adpt_init+0x0/0xdfd @ 1
[   25.568002] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[   25.572001] Detecting Adaptec I2O RAID controllers...
[   25.576008] initcall adpt_init+0x0/0xdfd returned -19 after 7812 usecs
[   25.584003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.588027] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.596007] calling  arcmsr_module_init+0x0/0x16 @ 1
[   25.600004] bus: 'pci': add driver arcmsr
[   25.604062] initcall arcmsr_module_init+0x0/0x16 returned 0 after 3906 usecs
[   25.612003] calling  ahc_linux_init+0x0/0x4f @ 1
[   25.616006] bus: 'pci': add driver aic7xxx
[   25.620069] initcall ahc_linux_init+0x0/0x4f returned 0 after 3906 usecs
[   25.628003] calling  aac_init+0x0/0x65 @ 1
[   25.632002] Adaptec aacraid driver 1.1-5[26400]-ms
[   25.636004] bus: 'pci': add driver aacraid
[   25.640069] initcall aac_init+0x0/0x65 returned 0 after 7812 usecs
[   25.648003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.652249] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.660003] calling  aic94xx_init+0x0/0x115 @ 1
[   25.664002] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[   25.672341] bus: 'pci': add driver aic94xx
[   25.676074] initcall aic94xx_init+0x0/0x115 returned 0 after 11718 usecs
[   25.680003] calling  pm8001_init+0x0/0x4c @ 1
[   25.688016] bus: 'pci': add driver pm8001
[   25.692070] initcall pm8001_init+0x0/0x4c returned 0 after 3906 usecs
[   25.696003] calling  ips_module_init+0x0/0x37e @ 1
[   25.700004] bus: 'pci': add driver ips
[   25.704073] bus: 'pci': remove driver ips
[   25.708050] driver: 'ips': driver_release
[   25.712008] initcall ips_module_init+0x0/0x37e returned -19 after 11718 usecs
[   25.720003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.724004] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.732003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.740004] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.744003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.752043] NCR53c406a: no available ports found
[   25.756003] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 3906 usecs
[   25.764003] calling  qlogicfas408_init+0x0/0x7 @ 1
[   25.768003] initcall qlogicfas408_init+0x0/0x7 returned 0 after 0 usecs
[   25.776003] calling  qlogicfas_init+0x0/0x1f4 @ 1
[   25.780002] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsinitcall qlogicfas_init+0x0/0x1f4 returned -19 after 7812 usecs
[   25.796003] calling  qla1280_init+0x0/0x16 @ 1
[   25.800004] bus: 'pci': add driver qla1280
[   25.804068] initcall qla1280_init+0x0/0x16 returned 0 after 3906 usecs
[   25.808003] calling  qla2x00_module_init+0x0/0x131 @ 1
[   25.816179] QLogic Fibre Channel HBA Driver: 8.03.02-k2
[   25.820006] bus: 'pci': add driver qla2xxx
[   25.824062] initcall qla2x00_module_init+0x0/0x131 returned 0 after 7812 usecs
[   25.832003] calling  qla4xxx_module_init+0x0/0xbd @ 1
[   25.836157] device: 'qla4xxx': device_add
[   25.840011] PM: Adding info for No Bus:qla4xxx
[   25.844049] iscsi: registered transport (qla4xxx)
[   25.848005] bus: 'pci': add driver qla4xxx
[   25.856060] QLogic iSCSI HBA Driver
[   25.859541] initcall qla4xxx_module_init+0x0/0xbd returned 0 after 19531 usecs
[   25.864003] calling  lpfc_init+0x0/0xad @ 1
[   25.868002] Emulex LightPulse Fibre Channel SCSI driver 8.3.12
[   25.876001] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[   25.880027] bus: 'pci': add driver lpfc
[   25.884073] initcall lpfc_init+0x0/0xad returned 0 after 15625 usecs
[   25.892004] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.896011] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.904003] calling  hpsa_init+0x0/0x16 @ 1
[   25.908004] bus: 'pci': add driver hpsa
[   25.912061] initcall hpsa_init+0x0/0x16 returned 0 after 3906 usecs
[   25.916003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.924006] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.932003] calling  dc395x_module_init+0x0/0x16 @ 1
[   25.936004] bus: 'pci': add driver dc395x
[   25.940060] initcall dc395x_module_init+0x0/0x16 returned 0 after 3906 usecs
[   25.948003] calling  dc390_module_init+0x0/0x89 @ 1
[   25.952002] DC390: clustering now enabled by default. If you get problems load
[   25.960002]        with "disable_clustering=1" and report to maintainers
[   25.964004] bus: 'pci': add driver tmscsim
[   25.968060] initcall dc390_module_init+0x0/0x89 returned 0 after 15625 usecs
[   25.976003] calling  megaraid_init+0x0/0xa6 @ 1
[   25.980017] bus: 'pci': add driver megaraid_legacy
[   25.984068] initcall megaraid_init+0x0/0xa6 returned 0 after 3906 usecs
[   25.992003] calling  _scsih_init+0x0/0x11b @ 1
[   25.996002] mpt2sas version 05.100.00.02 loaded
[   26.000021] device: 'mpt2ctl': device_add
[   26.004180] PM: Adding info for No Bus:mpt2ctl
[   26.012055] bus: 'pci': add driver mpt2sas
[   26.016077] initcall _scsih_init+0x0/0x11b returned 0 after 19531 usecs
[   26.020004] calling  gdth_init+0x0/0x7f2 @ 1
[   26.024002] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[   26.032008] bus: 'pci': add driver gdth
[   26.036068] initcall gdth_init+0x0/0x7f2 returned 0 after 11718 usecs
[   26.040003] calling  initio_init_driver+0x0/0x16 @ 1
[   26.048004] bus: 'pci': add driver initio
[   26.052062] initcall initio_init_driver+0x0/0x16 returned 0 after 3906 usecs
[   26.056003] calling  inia100_init+0x0/0x16 @ 1
[   26.064004] bus: 'pci': add driver inia100
[   26.068061] initcall inia100_init+0x0/0x16 returned 0 after 3906 usecs
[   26.072003] calling  tw_init+0x0/0x25 @ 1
[   26.076002] 3ware Storage Controller device driver for Linux v1.26.02.003.
[   26.084004] bus: 'pci': add driver 3w-xxxx
[   26.088061] initcall tw_init+0x0/0x25 returned 0 after 11718 usecs
[   26.096003] calling  twa_init+0x0/0x25 @ 1
[   26.100002] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[   26.104005] bus: 'pci': add driver 3w-9xxx
[   26.108061] initcall twa_init+0x0/0x25 returned 0 after 7812 usecs
[   26.116005] calling  twl_init+0x0/0x25 @ 1
[   26.120002] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[   26.128005] bus: 'pci': add driver 3w-sas
[   26.132073] initcall twl_init+0x0/0x25 returned 0 after 11718 usecs
[   26.136003] calling  init_nsp32+0x0/0x2c @ 1
[   26.144002] nsp32: loading...
[   26.146973] bus: 'pci': add driver nsp32
[   26.148070] initcall init_nsp32+0x0/0x2c returned 0 after 3906 usecs
[   26.156003] calling  ipr_init+0x0/0x34 @ 1
[   26.160002] ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
[   26.168005] bus: 'pci': add driver ipr
[   26.172063] initcall ipr_init+0x0/0x34 returned 0 after 11718 usecs
[   26.176003] calling  hptiop_module_init+0x0/0x2a @ 1
[   26.184002] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[   26.188005] bus: 'pci': add driver hptiop
[   26.192062] initcall hptiop_module_init+0x0/0x2a returned 0 after 7812 usecs
[   26.200003] calling  cxgb3i_init_module+0x0/0x41 @ 1
[   26.204003] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[   26.212008] device: 'cxgb3i': device_add
[   26.216011] PM: Adding info for No Bus:cxgb3i
[   26.220049] iscsi: registered transport (cxgb3i)
[   26.224009] initcall cxgb3i_init_module+0x0/0x41 returned 0 after 19531 usecs
[   26.232003] calling  bnx2i_mod_init+0x0/0xa5 @ 1
[   26.236002] Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.1 (Mar 24, 2010)
[   26.240008] device: 'bnx2i': device_add
[   26.244011] PM: Adding info for No Bus:bnx2i
[   26.252049] iscsi: registered transport (bnx2i)
[   26.256006] initcall bnx2i_mod_init+0x0/0xa5 returned 0 after 19531 usecs
[   26.260003] calling  beiscsi_module_init+0x0/0x88 @ 1
[   26.268008] device: 'be2iscsi': device_add
[   26.272010] PM: Adding info for No Bus:be2iscsi
[   26.276048] iscsi: registered transport (be2iscsi)
[   26.280006] bus: 'pci': add driver be2iscsi
[   26.284062] initcall beiscsi_module_init+0x0/0x88 returned 0 after 15625 usecs
[   26.292003] calling  pmcraid_init+0x0/0x10e @ 1
[   26.296013] device class 'pmcsas': registering
[   26.300104] bus: 'pci': add driver PMC MaxRAID
[   26.304072] initcall pmcraid_init+0x0/0x10e returned 0 after 7812 usecs
[   26.312004] calling  pvscsi_init+0x0/0x2a @ 1
[   26.316002] VMware PVSCSI driver - version 1.0.1.0-k
[   26.320005] bus: 'pci': add driver vmw_pvscsi
[   26.324062] initcall pvscsi_init+0x0/0x2a returned 0 after 7812 usecs
[   26.332003] calling  init_st+0x0/0x162 @ 1
[   26.336003] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[   26.344002] device class 'scsi_tape': registering
[   26.348053] bus: 'scsi': add driver st
[   26.352061] initcall init_st+0x0/0x162 returned 0 after 15625 usecs
[   26.356003] calling  init_osst+0x0/0x124 @ 1
[   26.360002] osst :I: Tape driver with OnStream support version 0.99.4
[   26.360004] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   26.376004] device class 'onstream_tape': registering
[   26.380054] bus: 'scsi': add driver osst
[   26.384055] initcall init_osst+0x0/0x124 returned 0 after 23437 usecs
[   26.388003] calling  init_sd+0x0/0x12e @ 1
[   26.396016] device class 'scsi_disk': registering
[   26.400062] bus: 'scsi': add driver sd
[   26.404241] initcall init_sd+0x0/0x12e returned 0 after 7812 usecs
[   26.408003] calling  init_sr+0x0/0x3d @ 1
[   26.412009] bus: 'scsi': add driver sr
[   26.416057] initcall init_sr+0x0/0x3d returned 0 after 3906 usecs
[   26.424003] calling  init_ch_module+0x0/0x9d @ 1
[   26.428002] SCSI Media Changer driver v0.25 
[   26.432002] device class 'scsi_changer': registering
[   26.436056] bus: 'scsi': add driver ch
[   26.440065] initcall init_ch_module+0x0/0x9d returned 0 after 11718 usecs
[   26.448004] calling  ses_init+0x0/0x33 @ 1
[   26.452003] bus: 'scsi': add driver ses
[   26.456056] initcall ses_init+0x0/0x33 returned 0 after 3906 usecs
[   26.460003] calling  ahci_init+0x0/0x16 @ 1
[   26.464007] bus: 'pci': add driver ahci
[   26.468075] initcall ahci_init+0x0/0x16 returned 0 after 3906 usecs
[   26.476003] calling  ahci_init+0x0/0x14 @ 1
[   26.480005] bus: 'platform': add driver ahci
[   26.484062] bus: 'platform': remove driver ahci
[   26.488052] driver: 'ahci': driver_release
[   26.492007] initcall ahci_init+0x0/0x14 returned -19 after 11718 usecs
[   26.500003] calling  inic_init+0x0/0x16 @ 1
[   26.504006] bus: 'pci': add driver sata_inic162x
[   26.508063] initcall inic_init+0x0/0x16 returned 0 after 3906 usecs
[   26.516003] calling  sil24_init+0x0/0x16 @ 1
[   26.520005] bus: 'pci': add driver sata_sil24
[   26.524063] initcall sil24_init+0x0/0x16 returned 0 after 3906 usecs
[   26.528003] calling  adma_ata_init+0x0/0x16 @ 1
[   26.536005] bus: 'pci': add driver pdc_adma
[   26.540062] initcall adma_ata_init+0x0/0x16 returned 0 after 3906 usecs
[   26.544003] calling  pdc_sata_init+0x0/0x16 @ 1
[   26.548006] bus: 'pci': add driver sata_sx4
[   26.552062] initcall pdc_sata_init+0x0/0x16 returned 0 after 3906 usecs
[   26.560003] calling  piix_init+0x0/0x24 @ 1
[   26.564005] bus: 'pci': add driver ata_piix
[   26.568087] initcall piix_init+0x0/0x24 returned 0 after 3906 usecs
[   26.576004] calling  nv_init+0x0/0x16 @ 1
[   26.580006] bus: 'pci': add driver sata_nv
[   26.584065] initcall nv_init+0x0/0x16 returned 0 after 3906 usecs
[   26.588003] calling  pdc_ata_init+0x0/0x16 @ 1
[   26.596006] bus: 'pci': add driver sata_promise
[   26.600064] initcall pdc_ata_init+0x0/0x16 returned 0 after 3906 usecs
[   26.604003] calling  uli_init+0x0/0x16 @ 1
[   26.608006] bus: 'pci': add driver sata_uli
[   26.612063] initcall uli_init+0x0/0x16 returned 0 after 3906 usecs
[   26.620003] calling  svia_init+0x0/0x16 @ 1
[   26.624006] bus: 'pci': add driver sata_via
[   26.628063] initcall svia_init+0x0/0x16 returned 0 after 3906 usecs
[   26.636004] calling  amd_init+0x0/0x16 @ 1
[   26.640006] bus: 'pci': add driver pata_amd
[   26.644010] bus: 'pci': driver_probe_device: matched device 0000:00:06.0 with driver pata_amd
[   26.652002] bus: 'pci': really_probe: probing driver pata_amd with device 0000:00:06.0
[   26.660009] pata_amd 0000:00:06.0: version 0.4.1
[   26.664113] pata_amd 0000:00:06.0: setting latency timer to 64
[   26.668107] scsi0 : pata_amd
[   26.672327] device: 'host0': device_add
[   26.676014] PM: Adding info for No Bus:host0
[   26.680004] device: 'host0': device_add
[   26.684037] PM: Adding info for No Bus:host0
[   26.688076] scsi1 : pata_amd
[   26.692021] device: 'host1': device_add
[   26.696012] PM: Adding info for No Bus:host1
[   26.700004] device: 'host1': device_add
[   26.704048] PM: Adding info for No Bus:host1
[   26.708067] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[   26.716002] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[   26.724012] driver: '0000:00:06.0': driver_bound: bound to device 'pata_amd'
[   26.724107] calling  1_async_port_probe+0x0/0x9d @ 119
[   26.724269] calling  2_async_port_probe+0x0/0x9d @ 120
[   26.724271] async_waiting @ 120
[   26.744005] bus: 'pci': really_probe: bound device 0000:00:06.0 to driver pata_amd
[   26.752059] initcall amd_init+0x0/0x16 returned 0 after 109375 usecs
[   26.756003] calling  artop_init+0x0/0x16 @ 1
[   26.760007] bus: 'pci': add driver pata_artop
[   26.764063] initcall artop_init+0x0/0x16 returned 0 after 3906 usecs
[   26.772003] calling  atiixp_init+0x0/0x16 @ 1
[   26.776006] bus: 'pci': add driver pata_atiixp
[   26.780062] initcall atiixp_init+0x0/0x16 returned 0 after 3906 usecs
[   26.788004] calling  atp867x_init+0x0/0x16 @ 1
[   26.792006] bus: 'pci': add driver pata_atp867x
[   26.796072] initcall atp867x_init+0x0/0x16 returned 0 after 3906 usecs
[   26.804008] calling  cs5520_init+0x0/0x16 @ 1
[   26.808007] bus: 'pci': add driver pata_cs5520
[   26.812069] initcall cs5520_init+0x0/0x16 returned 0 after 3906 usecs
[   26.820003] calling  cs5535_init+0x0/0x16 @ 1
[   26.824006] bus: 'pci': add driver cs5535
[   26.828072] initcall cs5535_init+0x0/0x16 returned 0 after 3906 usecs
[   26.832004] calling  cy82c693_init+0x0/0x16 @ 1
[   26.836007] bus: 'pci': add driver pata_cypress
[   26.844063] initcall cy82c693_init+0x0/0x16 returned 0 after 7812 usecs
[   26.848003] calling  efar_init+0x0/0x16 @ 1
[   26.852006] bus: 'pci': add driver pata_efar
[   26.856061] initcall efar_init+0x0/0x16 returned 0 after 3906 usecs
[   26.864003] calling  hpt37x_init+0x0/0x16 @ 1
[   26.868006] bus: 'pci': add driver pata_hpt37x
[   26.872062] initcall hpt37x_init+0x0/0x16 returned 0 after 3906 usecs
[   26.880003] calling  hpt3x2n_init+0x0/0x16 @ 1
[   26.884006] bus: 'pci': add driver pata_hpt3x2n
[   26.888063] initcall hpt3x2n_init+0x0/0x16 returned 0 after 3906 usecs
[   26.896005] calling  it821x_init+0x0/0x16 @ 1
[   26.900021] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
[   26.900034] bus: 'pci': add driver pata_it821x
[   26.900097] initcall it821x_init+0x0/0x16 returned 0 after 0 usecs
[   26.900100] calling  jmicron_init+0x0/0x16 @ 1
[   26.900107] bus: 'pci': add driver pata_jmicron
[   26.900169] initcall jmicron_init+0x0/0x16 returned 0 after 0 usecs
[   26.900172] calling  marvell_init+0x0/0x16 @ 1
[   26.900179] bus: 'pci': add driver pata_marvell
[   26.900251] initcall marvell_init+0x0/0x16 returned 0 after 0 usecs
[   26.900254] calling  ninja32_init+0x0/0x16 @ 1
[   26.900262] bus: 'pci': add driver pata_ninja32
[   26.900324] initcall ninja32_init+0x0/0x16 returned 0 after 0 usecs
[   26.900328] calling  ns87415_init+0x0/0x16 @ 1
[   26.900335] bus: 'pci': add driver pata_ns87415
[   26.900397] initcall ns87415_init+0x0/0x16 returned 0 after 0 usecs
[   26.900400] calling  oldpiix_init+0x0/0x16 @ 1
[   26.900407] bus: 'pci': add driver pata_oldpiix
[   26.900469] initcall oldpiix_init+0x0/0x16 returned 0 after 0 usecs
[   26.900472] calling  optidma_init+0x0/0x16 @ 1
[   26.900480] bus: 'pci': add driver pata_optidma
[   26.900541] initcall optidma_init+0x0/0x16 returned 0 after 0 usecs
[   26.900545] calling  pdc2027x_init+0x0/0x16 @ 1
[   26.900552] bus: 'pci': add driver pata_pdc2027x
[   26.900614] initcall pdc2027x_init+0x0/0x16 returned 0 after 0 usecs
[   26.900618] calling  pdc202xx_init+0x0/0x16 @ 1
[   26.900625] bus: 'pci': add driver pata_pdc202xx_old
[   26.900687] initcall pdc202xx_init+0x0/0x16 returned 0 after 0 usecs
[   26.900691] calling  radisys_init+0x0/0x16 @ 1
[   26.900698] bus: 'pci': add driver pata_radisys
[   26.900769] initcall radisys_init+0x0/0x16 returned 0 after 0 usecs
[   26.900773] calling  sc1200_init+0x0/0x16 @ 1
[   26.900780] bus: 'pci': add driver sc1200
[   26.900842] initcall sc1200_init+0x0/0x16 returned 0 after 0 usecs
[   26.900845] calling  sch_init+0x0/0x16 @ 1
[   26.900853] bus: 'pci': add driver pata_sch
[   26.900914] initcall sch_init+0x0/0x16 returned 0 after 0 usecs
[   26.900918] calling  sis_init+0x0/0x16 @ 1
[   26.900925] bus: 'pci': add driver pata_sis
[   26.900987] initcall sis_init+0x0/0x16 returned 0 after 0 usecs
[   26.900991] calling  ata_tosh_init+0x0/0x16 @ 1
[   26.900998] bus: 'pci': add driver pata_piccolo
[   26.901061] initcall ata_tosh_init+0x0/0x16 returned 0 after 0 usecs
[   26.901064] calling  via_init+0x0/0x16 @ 1
[   26.901072] bus: 'pci': add driver pata_via
[   26.901134] initcall via_init+0x0/0x16 returned 0 after 0 usecs
[   26.901138] calling  sl82c105_init+0x0/0x16 @ 1
[   26.901145] bus: 'pci': add driver pata_sl82c105
[   26.901207] initcall sl82c105_init+0x0/0x16 returned 0 after 0 usecs
[   26.901211] calling  cmd640_init+0x0/0x16 @ 1
[   26.901219] bus: 'pci': add driver pata_cmd640
[   26.901290] initcall cmd640_init+0x0/0x16 returned 0 after 0 usecs
[   26.901294] calling  pata_platform_init+0x0/0xf @ 1
[   26.901299] bus: 'platform': add driver pata_platform
[   26.901356] initcall pata_platform_init+0x0/0xf returned 0 after 0 usecs
[   26.901359] calling  qdi_init+0x0/0x1c0 @ 1
[   26.901363] initcall qdi_init+0x0/0x1c0 returned -19 after 0 usecs
[   26.901367] calling  rz1000_init+0x0/0x16 @ 1
[   26.901375] bus: 'pci': add driver pata_rz1000
[   26.901438] initcall rz1000_init+0x0/0x16 returned 0 after 0 usecs
[   26.901441] calling  winbond_init+0x0/0x26d @ 1
[   26.901445] initcall winbond_init+0x0/0x26d returned -19 after 0 usecs
[   26.901449] calling  ata_generic_init+0x0/0x16 @ 1
[   26.901456] bus: 'pci': add driver ata_generic
[   26.901519] initcall ata_generic_init+0x0/0x16 returned 0 after 0 usecs
[   26.901523] calling  legacy_init+0x0/0x82a @ 1
[   26.901592] initcall legacy_init+0x0/0x82a returned -19 after 0 usecs
[   26.901595] calling  marvell_init+0x0/0x49 @ 1
[   26.901598] bus: 'mdio_bus': add driver Marvell 88E1101
[   26.901662] bus: 'mdio_bus': add driver Marvell 88E1112
[   26.901751] bus: 'mdio_bus': add driver Marvell 88E1111
[   26.901808] bus: 'mdio_bus': add driver Marvell 88E1118
[   26.901864] bus: 'mdio_bus': add driver Marvell 88E1121R
[   26.901919] bus: 'mdio_bus': add driver Marvell 88E1145
[   26.901981] bus: 'mdio_bus': add driver Marvell 88E1240
[   26.902035] initcall marvell_init+0x0/0x49 returned 0 after 0 usecs
[   26.902039] calling  lxt_init+0x0/0x33 @ 1
[   26.902041] bus: 'mdio_bus': add driver LXT970
[   26.902094] bus: 'mdio_bus': add driver LXT971
[   26.902148] initcall lxt_init+0x0/0x33 returned 0 after 0 usecs
[   26.902151] calling  qs6612_init+0x0/0xf @ 1
[   26.902153] bus: 'mdio_bus': add driver QS6612
[   26.902207] initcall qs6612_init+0x0/0xf returned 0 after 0 usecs
[   26.902211] calling  smsc_init+0x0/0x81 @ 1
[   26.902213] bus: 'mdio_bus': add driver SMSC LAN83C185
[   26.902266] bus: 'mdio_bus': add driver SMSC LAN8187
[   26.902318] bus: 'mdio_bus': add driver SMSC LAN8700
[   26.902370] bus: 'mdio_bus': add driver SMSC LAN911x Internal PHY
[   26.902423] bus: 'mdio_bus': add driver SMSC LAN8710/LAN8720
[   26.902478] initcall smsc_init+0x0/0x81 returned 0 after 0 usecs
[   26.902481] calling  vsc82xx_init+0x0/0x33 @ 1
[   26.902484] bus: 'mdio_bus': add driver Vitesse VSC8244
[   26.902536] bus: 'mdio_bus': add driver Vitesse VSC8221
[   26.902600] initcall vsc82xx_init+0x0/0x33 returned 0 after 0 usecs
[   26.902603] calling  ip175c_init+0x0/0xf @ 1
[   26.902606] bus: 'mdio_bus': add driver ICPlus IP175C
[   26.902660] initcall ip175c_init+0x0/0xf returned 0 after 0 usecs
[   26.902663] calling  et1011c_init+0x0/0xf @ 1
[   26.902666] bus: 'mdio_bus': add driver ET1011C
[   26.902720] initcall et1011c_init+0x0/0xf returned 0 after 0 usecs
[   26.902724] calling  fixed_mdio_bus_init+0x0/0xc7 @ 1
[   26.902731] Registering platform device 'Fixed MDIO bus.0'. Parent at platform
[   26.902734] device: 'Fixed MDIO bus.0': device_add
[   26.902741] bus: 'platform': add device Fixed MDIO bus.0
[   26.902755] PM: Adding info for platform:Fixed MDIO bus.0
[   26.902831] device: '0': device_add
[   26.902848] PM: Adding info for No Bus:0
[   26.902899] Fixed MDIO Bus: probed
[   26.902903] initcall fixed_mdio_bus_init+0x0/0xc7 returned 0 after 0 usecs
[   26.902907] calling  ksphy_init+0x0/0x4d @ 1
[   26.902909] bus: 'mdio_bus': add driver Micrel KS8001
[   26.902963] bus: 'mdio_bus': add driver Micrel VSC8201
[   26.903016] bus: 'mdio_bus': add driver Micrel KSZ9021 Gigabit PHY
[   26.903072] initcall ksphy_init+0x0/0x4d returned 0 after 0 usecs
[   26.903075] calling  e1000_init_module+0x0/0x6e @ 1
[   26.903078] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
[   26.903080] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   26.903088] bus: 'pci': add driver e1000
[   26.903162] initcall e1000_init_module+0x0/0x6e returned 0 after 0 usecs
[   26.903165] calling  e1000_init_module+0x0/0x2f @ 1
[   26.903167] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4
[   26.903169] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[   26.903177] bus: 'pci': add driver e1000e
[   26.903180] initcall e1000_init_module+0x0/0x2f returned 0 after 0 usecs
[   26.903180] calling  igbvf_init_module+0x0/0x53 @ 1
[   26.903180] Intel(R) Virtual Function Network Driver - version 1.0.0-k0
[   26.903180] Copyright (c) 2009 Intel Corporation.
[   26.903180] bus: 'pci': add driver igbvf
[   26.903180] initcall igbvf_init_module+0x0/0x53 returned 0 after 0 usecs
[   26.903180] calling  ixgbevf_init_module+0x0/0x39 @ 1
[   26.903180] ixgbevf: Intel(R) 82599 Virtual Function - version 1.0.0-k0
[   26.903180] Copyright (c) 2009 Intel Corporation.
[   26.903180] bus: 'pci': add driver ixgbevf
[   26.903180] initcall ixgbevf_init_module+0x0/0x39 returned 0 after 0 usecs
[   26.903180] calling  ixgb_init_module+0x0/0x39 @ 1
[   26.903180] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[   26.903180] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[   26.903180] bus: 'pci': add driver ixgb
[   26.903180] initcall ixgb_init_module+0x0/0x39 returned 0 after 0 usecs
[   26.903180] calling  ipg_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver Sundance Technology IPG Triple-Speed Ethernet
[   26.903180] initcall ipg_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  t1_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver cxgb
[   26.903180] initcall t1_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  cxgb3_init_module+0x0/0x1b @ 1
[   26.903180] bus: 'pci': add driver cxgb3
[   26.903180] initcall cxgb3_init_module+0x0/0x1b returned 0 after 0 usecs
[   26.903180] calling  cxgb4_init_module+0x0/0x4c @ 1
[   26.903180] bus: 'pci': add driver cxgb4
[   26.903180] initcall cxgb4_init_module+0x0/0x4c returned 0 after 0 usecs
[   26.903180] calling  atl1_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver atl1
[   26.903180] initcall atl1_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  atl2_init_module+0x0/0x39 @ 1
[   26.903180] Atheros(R) L2 Ethernet Driver - version 2.2.3
[   26.903180] Copyright (c) 2007 Atheros Corporation.
[   26.903180] bus: 'pci': add driver atl2
[   26.903180] initcall atl2_init_module+0x0/0x39 returned 0 after 0 usecs
[   26.903180] calling  atl1e_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver ATL1E
[   26.903180] initcall atl1e_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  bdx_module_init+0x0/0x6d @ 1
[   26.903180] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[   26.903180] tehuti: Options: hw_csum 
[   26.903180] bus: 'pci': add driver tehuti
[   26.903180] initcall bdx_module_init+0x0/0x6d returned 0 after 0 usecs
[   26.903180] calling  enic_init_module+0x0/0x2a @ 1
[   26.903180] enic: Cisco VIC Ethernet NIC Driver, ver 1.3.1.1-pp
[   26.903180] bus: 'pci': add driver enic
[   26.903180] initcall enic_init_module+0x0/0x2a returned 0 after 0 usecs
[   26.903180] calling  vmxnet3_init_module+0x0/0x2a @ 1
[   26.903180] VMware vmxnet3 virtual NIC driver - version 1.0.5.0-k-NAPI
[   26.903180] bus: 'pci': add driver vmxnet3
[   26.903180] initcall vmxnet3_init_module+0x0/0x2a returned 0 after 0 usecs
[   26.903180] calling  plip_init+0x0/0x52 @ 1
[   26.903180] initcall plip_init+0x0/0x52 returned 0 after 0 usecs
[   26.903180] calling  rr_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver rrunner
[   26.903180] initcall rr_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  happy_meal_probe+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver hme
[   26.903180] initcall happy_meal_probe+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  gem_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver gem
[   26.903180] initcall gem_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  cas_init+0x0/0x36 @ 1
[   26.903180] bus: 'pci': add driver cassini
[   26.903180] initcall cas_init+0x0/0x36 returned 0 after 0 usecs
[   26.903180] calling  ne2k_pci_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver ne2k-pci
[   26.903180] initcall ne2k_pci_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  pcnet32_init_module+0x0/0x102 @ 1
[   26.903180] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend-I1c7kopa9pxLokYuJOExCg@public.gmane.org
[   26.903180] bus: 'pci': add driver pcnet32
[   26.903180] initcall pcnet32_init_module+0x0/0x102 returned 0 after 0 usecs
[   26.903180] calling  e100_init_module+0x0/0x4d @ 1
[   26.903180] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   26.903180] e100: Copyright(c) 1999-2006 Intel Corporation
[   26.903180] bus: 'pci': add driver e100
[   26.903180] initcall e100_init_module+0x0/0x4d returned 0 after 0 usecs
[   26.903180] calling  epic_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver epic100
[   26.903180] initcall epic_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  sis900_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver sis900
[   26.903180] initcall sis900_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  r6040_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver r6040
[   26.903180] initcall r6040_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  yellowfin_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver yellowfin
[   26.903180] initcall yellowfin_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  acenic_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver acenic
[   26.903180] initcall acenic_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  natsemi_init_mod+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver natsemi
[   26.903180] initcall natsemi_init_mod+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  ns83820_init+0x0/0x20 @ 1
[   26.903180] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[   26.903180] bus: 'pci': add driver ns83820
[   26.903180] initcall ns83820_init+0x0/0x20 returned 0 after 0 usecs
[   26.903180] calling  tg3_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver tg3
[   26.903180] initcall tg3_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  bnx2_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver bnx2
[   26.903180] initcall bnx2_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  cnic_init+0x0/0x32 @ 1
[   26.903180] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
[   26.903180] initcall cnic_init+0x0/0x32 returned 0 after 0 usecs
[   26.903180] calling  bnx2x_init+0x0/0x7a @ 1
[   26.903180] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.52.53-1 (2010/18/04)
[   26.903180] bus: 'pci': add driver bnx2x
[   26.903180] initcall bnx2x_init+0x0/0x7a returned 0 after 0 usecs
[   26.903180] calling  skge_init_module+0x0/0x49 @ 1
[   26.903180] bus: 'pci': add driver skge
[   26.903180] initcall skge_init_module+0x0/0x49 returned 0 after 0 usecs
[   26.903180] calling  sky2_init_module+0x0/0x20 @ 1
[   26.903180] sky2: driver version 1.28
[   26.903180] bus: 'pci': add driver sky2
[   26.903180] initcall sky2_init_module+0x0/0x20 returned 0 after 0 usecs
[   26.903180] calling  ks8842_init+0x0/0xf @ 1
[   26.903180] bus: 'platform': add driver ks8842
[   26.903180] initcall ks8842_init+0x0/0xf returned 0 after 0 usecs
[   26.903180] calling  rhine_init+0x0/0x54 @ 1
[   26.903180] bus: 'pci': add driver via-rhine
[   26.903180] initcall rhine_init+0x0/0x54 returned 0 after 0 usecs
[   26.903180] calling  velocity_init_module+0x0/0x34 @ 1
[   26.903180] bus: 'pci': add driver via-velocity
[   26.903180] initcall velocity_init_module+0x0/0x34 returned 0 after 0 usecs
[   26.903180] calling  sundance_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver sundance
[   26.903180] initcall sundance_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  hamachi_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver hamachi
[   26.903180] initcall hamachi_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  net_olddevs_init+0x0/0x82 @ 1
[   26.903180] cs89x0:cs89x0_probe(0x0)
[   26.903180] PP_addr at 300[a]: 0xffff
[   26.903180] eth0: incorrect signature at 300[c]: 0xffff!=0x630E
[   26.903180] cs89x0: request_region(0x320, 0x10) failed
[   26.903180] PP_addr at 340[a]: 0xffff
[   26.903180] eth0: incorrect signature at 340[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 360[a]: 0xffff
[   26.903180] eth0: incorrect signature at 360[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 200[a]: 0xffff
[   26.903180] eth0: incorrect signature at 200[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 220[a]: 0xffff
[   26.903180] eth0: incorrect signature at 220[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 240[a]: 0xffff
[   26.903180] eth0: incorrect signature at 240[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 260[a]: 0xffff
[   26.903180] eth0: incorrect signature at 260[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 280[a]: 0xffff
[   26.903180] eth0: incorrect signature at 280[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 2a0[a]: 0xffff
[   26.903180] eth0: incorrect signature at 2a0[c]: 0xffff!=0x630E
[   26.903184] PP_addr at 2c0[a]: 0xffff
[   26.903190] eth0: incorrect signature at 2c0[c]: 0xffff!=0x630E
[   26.903197] PP_addr at 2e0[a]: 0xffff
[   26.903203] eth0: incorrect signature at 2e0[c]: 0xffff!=0x630E
[   26.903213] cs89x0: no cs8900 or cs8920 detected.  Be sure to disable PnP with SETUP
[   26.903446] D-Link DE-620 pocket adapter not identified in the printer port
[   26.903504] initcall net_olddevs_init+0x0/0x82 returned 0 after 0 usecs
[   26.903507] calling  b44_init+0x0/0x55 @ 1
[   26.903517] bus: 'pci': add driver b44
[   26.903581] bus: 'ssb': add driver b44
[   26.903634] initcall b44_init+0x0/0x55 returned 0 after 0 usecs
[   26.903637] calling  init_nic+0x0/0x16 @ 1
[   26.903646] bus: 'pci': add driver forcedeth
[   26.903658] bus: 'pci': driver_probe_device: matched device 0000:00:0a.0 with driver forcedeth
[   26.903661] bus: 'pci': really_probe: probing driver forcedeth with device 0000:00:0a.0
[   26.903670] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   26.903731] IOAPIC[0]: Set routing entry (2-11 -> 0x49 -> IRQ 37 Mode:1 Active:1)
[   26.903738] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 37
[   26.903750] forcedeth 0000:00:0a.0: setting latency timer to 64
[   26.903842] nv_probe: set workaround bit for reversed mac addr
[   26.904004] ata1.00: 488397168 sectors, multi 1: LBA48 
[   26.908022] ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[   26.936159] ata1.00: configured for UDMA/100
[   26.940007] async_waiting @ 119
[   26.943144] async_continuing @ 119 after 0 usec
[   26.944235] scsi 0:0:0:0: Direct-Access     ATA      HDS722525VLAT80  V36O PQ: 0 ANSI: 5
[   26.948009] device: 'target0:0:0': device_add
[   26.952012] PM: Adding info for No Bus:target0:0:0
[   26.956007] device: '0:0:0:0': device_add
[   26.960039] bus: 'scsi': add device 0:0:0:0
[   26.964013] PM: Adding info for scsi:0:0:0:0
[   26.968060] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver st
[   26.972002] bus: 'scsi': really_probe: probing driver st with device 0:0:0:0
[   26.976017] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver osst
[   26.980002] bus: 'scsi': really_probe: probing driver osst with device 0:0:0:0
[   26.984014] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd
[   26.988003] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
[   26.992038] device: '0:0:0:0': device_add
[   26.996027] PM: Adding info for No Bus:0:0:0:0
[   27.000056] driver: '0:0:0:0': driver_bound: bound to device 'sd'
[   27.000059] calling  3_sd_probe_async+0x0/0x1be @ 122
[   27.000196] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[   27.000370] sd 0:0:0:0: [sda] Write Protect is off
[   27.000373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   27.000444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   27.000455] device: 'sda': device_add
[   27.000498] PM: Adding info for No Bus:sda
[   27.000498]  sda:
[   27.000498] BUG: spinlock bad magic on CPU#1, async/2/122
[   27.000498]  lock: 7f8d6c3c, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[   27.000498] Pid: 122, comm: async/2 Not tainted 2.6.35-rc2-00131-g7908a9e #8184
[   27.000498] Call Trace:
[   27.000498]  [<41ba1a73>] ? printk+0x20/0x24
[   27.000498]  [<4134b647>] spin_bug+0x7c/0x87
[   27.000498]  [<4134b6e3>] do_raw_spin_lock+0x1e/0x123
[   27.000498]  [<41ba3ffa>] ? _raw_spin_lock_irqsave+0x12/0x20
[   27.000498]  [<41ba4002>] _raw_spin_lock_irqsave+0x1a/0x20
[   27.000498]  [<4133461b>] blkiocg_update_io_add_stats+0x25/0xfb
[   27.000498]  [<41335c5a>] ? cfq_prio_tree_add+0xb1/0xc1
[   27.000498]  [<41337a8c>] cfq_insert_request+0x8c/0x42b
[   27.000498]  [<41ba3fa1>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   27.000498]  [<41ba3fa1>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   27.000498]  [<41329125>] elv_insert+0x107/0x1a0
[   27.000498]  [<41329254>] __elv_add_request+0x96/0x9d
[   27.000498]  [<4132ba39>] ? drive_stat_acct+0x9d/0xc6
[   27.000498]  [<4132dc11>] __make_request+0x335/0x376
[   27.000501]  [<4132c5d3>] generic_make_request+0x336/0x39d
[   27.000506]  [<410ad4ca>] ? kmem_cache_alloc+0xa1/0x105
[   27.000510]  [<4108935d>] ? mempool_alloc_slab+0xe/0x10
[   27.000513]  [<4108935d>] ? mempool_alloc_slab+0xe/0x10
[   27.000517]  [<4108935d>] ? mempool_alloc_slab+0xe/0x10
[   27.000520]  [<4108941f>] ? mempool_alloc+0x57/0xe2
[   27.000524]  [<4132c6b1>] submit_bio+0x77/0x8f
[   27.000528]  [<410d2d48>] ? bio_alloc_bioset+0x37/0x94
[   27.000531]  [<410cec1c>] submit_bh+0xc3/0xe2
[   27.000535]  [<410d1500>] block_read_full_page+0x249/0x259
[   27.000538]  [<410d3287>] ? blkdev_get_block+0x0/0xc6
[   27.000542]  [<41087cd2>] ? add_to_page_cache_locked+0x94/0xb5
[   27.000545]  [<410d3e1e>] blkdev_readpage+0xf/0x11
[   27.000549]  [<410888fb>] do_read_cache_page+0x7d/0x11a
[   27.000552]  [<410d3e0f>] ? blkdev_readpage+0x0/0x11
[   27.000555]  [<410889cc>] read_cache_page_async+0x16/0x1b
[   27.000559]  [<410889dc>] read_cache_page+0xb/0x12
[   27.000563]  [<410e8171>] read_dev_sector+0x2a/0x63
[   27.000566]  [<410e9378>] adfspart_check_ICS+0x2e/0x166
[   27.000569]  [<41ba1a73>] ? printk+0x20/0x24
[   27.000573]  [<410e8db3>] rescan_partitions+0x196/0x3e4
[   27.000576]  [<41ba2af3>] ? __mutex_unlock_slowpath+0x98/0x9f
[   27.000580]  [<410e934a>] ? adfspart_check_ICS+0x0/0x166
[   27.000583]  [<410d4303>] __blkdev_get+0x1e7/0x292
[   27.000587]  [<4133a0d9>] ? kobject_put+0x14/0x16
[   27.000591]  [<410d43b8>] blkdev_get+0xa/0xc
[   27.000594]  [<410e828b>] register_disk+0x94/0xe5
[   27.000597]  [<41332572>] ? blk_register_region+0x1b/0x20
[   27.000601]  [<413326c1>] add_disk+0x57/0x95
[   27.000604]  [<41331e72>] ? exact_match+0x0/0x8
[   27.000607]  [<413321eb>] ? exact_lock+0x0/0x11
[   27.000610]  [<416436e0>] sd_probe_async+0x108/0x1be
[   27.000615]  [<41048489>] async_thread+0xf5/0x1e6
[   27.000619]  [<4102c9d7>] ? default_wake_function+0x0/0xd
[   27.000623]  [<41048394>] ? async_thread+0x0/0x1e6
[   27.000628]  [<4104304b>] kthread+0x5f/0x64
[   27.000631]  [<41042fec>] ? kthread+0x0/0x64
[   27.000635]  [<41002ce6>] kernel_thread_helper+0x6/0x10
[   27.000698]  sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[   27.000698] device: 'sda1': device_add
[   27.000698] PM: Adding info for No Bus:sda1
[   27.000698] device: 'sda2': device_add
[   27.000698] PM: Adding info for No Bus:sda2
[   27.000698] device: 'sda3': device_add
[   27.000698] PM: Adding info for No Bus:sda3
[   27.000698] device: 'sda5': device_add
[   27.000698] PM: Adding info for No Bus:sda5
[   27.000698] device: 'sda6': device_add
[   27.000698] PM: Adding info for No Bus:sda6
[   27.000698] device: 'sda7': device_add
[   27.000698] PM: Adding info for No Bus:sda7
[   27.000698] device: 'sda8': device_add
[   27.000698] PM: Adding info for No Bus:sda8
[   27.000698] device: 'sda9': device_add
[   27.000698] PM: Adding info for No Bus:sda9
[   27.000698] device: 'sda10': device_add
[   27.000698] PM: Adding info for No Bus:sda10
[   27.004004] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
[   27.003997] device: '8:0': device_add
[   27.003997] PM: Adding info for No Bus:8:0
[   27.004046] sd 0:0:0:0: [sda] Attached SCSI disk
[   27.004051] initcall 3_sd_probe_async+0x0/0x1be returned 0 after 3906 usecs
[   27.008005] device: '0:0:0:0': device_add
[   27.012030] PM: Adding info for No Bus:0:0:0:0
[   27.016071] initcall 1_async_port_probe+0x0/0x9d returned 0 after 285156 usecs
[   27.020005] async_continuing @ 120 after 289062 usec
[   27.192221] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
[   27.196021] ata2: nv_mode_filter: 0x1f39f&0x73ff->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
[   27.220156] ata2.01: configured for UDMA/33
[   27.224057] async_waiting @ 120
[   27.228003] async_continuing @ 120 after 0 usec
[   27.232047] scsi 1:0:1:0: CD-ROM            DVDRW    IDE 16X          A079 PQ: 0 ANSI: 5
[   27.240017] device: 'target1:0:1': device_add
[   27.244011] PM: Adding info for No Bus:target1:0:1
[   27.248008] device: '1:0:1:0': device_add
[   27.252039] bus: 'scsi': add device 1:0:1:0
[   27.256013] PM: Adding info for scsi:1:0:1:0
[   27.260059] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver st
[   27.268002] bus: 'scsi': really_probe: probing driver st with device 1:0:1:0
[   27.276017] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver osst
[   27.284002] bus: 'scsi': really_probe: probing driver osst with device 1:0:1:0
[   27.292015] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sd
[   27.300002] bus: 'scsi': really_probe: probing driver sd with device 1:0:1:0
[   27.304015] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sr
[   27.312002] bus: 'scsi': really_probe: probing driver sr with device 1:0:1:0
[   27.324025] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[   27.332005] Uniform CD-ROM driver Revision: 3.20
[   27.336007] device: 'sr0': device_add
[   27.340062] PM: Adding info for No Bus:sr0
[   27.344124] device: '11:0': device_add
[   27.348025] PM: Adding info for No Bus:11:0
[   27.352064] sr 1:0:1:0: Attached scsi CD-ROM sr0
[   27.356002] driver: '1:0:1:0': driver_bound: bound to device 'sr'
[   27.360003] bus: 'scsi': really_probe: bound device 1:0:1:0 to driver sr
[   27.368004] device: '1:0:1:0': device_add
[   27.372018] PM: Adding info for No Bus:1:0:1:0
[   27.376070] initcall 2_async_port_probe+0x0/0x9d returned 0 after 636718 usecs
[   27.420191] device: 'eth0': device_add
[   27.424031] PM: Adding info for No Bus:eth0
[   27.428145] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
[   27.436004] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[   27.440002] driver: '0000:00:0a.0': driver_bound: bound to device 'forcedeth'
[   27.448003] bus: 'pci': really_probe: bound device 0000:00:0a.0 to driver forcedeth
[   27.456062] initcall init_nic+0x0/0x16 returned 0 after 542968 usecs
[   27.464003] calling  qlcnic_init_module+0x0/0x39 @ 1
[   27.468002] QLogic Converged Ethernet Driver v5.0.2
[   27.472016] bus: 'pci': add driver qlcnic
[   27.476086] initcall qlcnic_init_module+0x0/0x39 returned 0 after 7812 usecs
[   27.484003] calling  qlge_init_module+0x0/0x16 @ 1
[   27.488010] bus: 'pci': add driver qlge
[   27.492062] initcall qlge_init_module+0x0/0x16 returned 0 after 3906 usecs
[   27.500003] calling  ppp_init+0x0/0xc3 @ 1
[   27.504002] PPP generic driver version 2.4.2
[   27.508030] device class 'ppp': registering
[   27.512062] device: 'ppp': device_add
[   27.516194] PM: Adding info for No Bus:ppp
[   27.520055] initcall ppp_init+0x0/0xc3 returned 0 after 15625 usecs
[   27.524003] calling  ppp_async_init+0x0/0x2d @ 1
[   27.532004] initcall ppp_async_init+0x0/0x2d returned 0 after 0 usecs
[   27.536003] calling  deflate_init+0x0/0x30 @ 1
[   27.540003] PPP Deflate Compression module registered
[   27.548004] initcall deflate_init+0x0/0x30 returned 0 after 7812 usecs
[   27.552003] calling  bsdcomp_init+0x0/0x26 @ 1
[   27.556002] PPP BSD Compression module registered
[   27.564003] initcall bsdcomp_init+0x0/0x26 returned 0 after 7812 usecs
[   27.568003] calling  pppox_init+0x0/0xf @ 1
[   27.572002] NET: Registered protocol family 24
[   27.576003] initcall pppox_init+0x0/0xf returned 0 after 3906 usecs
[   27.584003] calling  pppoe_init+0x0/0x71 @ 1
[   27.588018] initcall pppoe_init+0x0/0x71 returned 0 after 0 usecs
[   27.592003] calling  slip_init+0x0/0x99 @ 1
[   27.600002] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[   27.608002] CSLIP: code copyright 1989 Regents of the University of California.
[   27.616007] initcall slip_init+0x0/0x99 returned 0 after 15625 usecs
[   27.620003] calling  dummy_init_module+0x0/0x96 @ 1
[   27.628028] device: 'dummy0': device_add
[   27.632081] PM: Adding info for No Bus:dummy0
[   27.636135] initcall dummy_init_module+0x0/0x96 returned 0 after 7812 usecs
[   27.640003] calling  macvlan_init_module+0x0/0x45 @ 1
[   27.648005] initcall macvlan_init_module+0x0/0x45 returned 0 after 0 usecs
[   27.652004] calling  macvtap_init+0x0/0xa4 @ 1
[   27.660006] device class 'macvtap': registering
[   27.664058] initcall macvtap_init+0x0/0xa4 returned 0 after 3906 usecs
[   27.668003] calling  rtl8139_init_module+0x0/0x16 @ 1
[   27.676013] bus: 'pci': add driver 8139too
[   27.680022] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139too
[   27.688002] bus: 'pci': really_probe: probing driver 8139too with device 0000:05:07.0
[   27.696008] 8139too: 8139too Fast Ethernet driver 0.9.28
[   27.700047] 8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 37
[   27.708252] device: 'eth1': device_add
[   27.712085] PM: Adding info for No Bus:eth1
[   27.716130] 8139too 0000:05:07.0: eth1: RealTek RTL8139 at 0x80dfc000, 00:c0:df:03:68:5d, IRQ 37
[   27.724003] driver: '0000:05:07.0': driver_bound: bound to device '8139too'
[   27.732003] bus: 'pci': really_probe: bound device 0000:05:07.0 to driver 8139too
[   27.740055] initcall rtl8139_init_module+0x0/0x16 returned 0 after 62500 usecs
[   27.744003] calling  atp_init_module+0x0/0x81 @ 1
[   27.752002] atp.c:v1.09=ac 2002/10/01 Donald Becker <becker-H7y4myexbJEAvxtiuMwx3w@public.gmane.org>
[   27.756034] initcall atp_init_module+0x0/0x81 returned -19 after 3906 usecs
[   27.764005] calling  sc92031_init+0x0/0x16 @ 1
[   27.768011] bus: 'pci': add driver sc92031
[   27.772065] initcall sc92031_init+0x0/0x16 returned 0 after 3906 usecs
[   27.780003] calling  eql_init_module+0x0/0x50 @ 1
[   27.784002] Equalizer2002: Simon Janes (simon-X2aNl4KbYbw@public.gmane.org) and David S. Miller (davem-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org)
[   27.792019] device: 'eql': device_add
[   27.796120] PM: Adding info for No Bus:eql
[   27.800130] initcall eql_init_module+0x0/0x50 returned 0 after 15625 usecs
[   27.808009] calling  tun_init+0x0/0x79 @ 1
[   27.812003] tun: Universal TUN/TAP device driver, 1.6
[   27.816002] tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org>
[   27.824022] device: 'tun': device_add
[   27.828201] PM: Adding info for No Bus:tun
[   27.832064] initcall tun_init+0x0/0x79 returned 0 after 19531 usecs
[   27.836003] calling  veth_init+0x0/0xf @ 1
[   27.840005] initcall veth_init+0x0/0xf returned 0 after 0 usecs
[   27.844003] calling  rio_init+0x0/0x16 @ 1
[   27.848017] bus: 'pci': add driver dl2k
[   27.852085] initcall rio_init+0x0/0x16 returned 0 after 3906 usecs
[   27.856003] calling  rtl8169_init_module+0x0/0x16 @ 1
[   27.860010] bus: 'pci': add driver r8169
[   27.864064] initcall rtl8169_init_module+0x0/0x16 returned 0 after 3906 usecs
[   27.868003] calling  amd8111e_init+0x0/0x16 @ 1
[   27.872010] bus: 'pci': add driver amd8111e
[   27.876063] initcall amd8111e_init+0x0/0x16 returned 0 after 3906 usecs
[   27.880003] calling  myri10ge_init_module+0x0/0x5b @ 1
[   27.884002] myri10ge: Version 1.5.2-1.459
[   27.888013] bus: 'pci': add driver myri10ge
[   27.892063] initcall myri10ge_init_module+0x0/0x5b returned 0 after 7812 usecs
[   27.896003] calling  mlx4_init+0x0/0x93 @ 1
[   27.900059] bus: 'pci': add driver mlx4_core
[   27.904071] initcall mlx4_init+0x0/0x93 returned 0 after 3906 usecs
[   27.912003] calling  mlx4_en_init+0x0/0xf @ 1
[   27.916004] initcall mlx4_en_init+0x0/0xf returned 0 after 0 usecs
[   27.924003] calling  ethoc_init+0x0/0xf @ 1
[   27.928005] bus: 'platform': add driver ethoc
[   27.932060] initcall ethoc_init+0x0/0xf returned 0 after 3906 usecs
[   27.936003] calling  dnet_init+0x0/0xf @ 1
[   27.940003] bus: 'platform': add driver dnet
[   27.944055] initcall dnet_init+0x0/0xf returned 0 after 7812 usecs
[   27.952003] calling  olympic_pci_init+0x0/0x16 @ 1
[   27.956011] bus: 'pci': add driver olympic
[   27.960061] initcall olympic_pci_init+0x0/0x16 returned 0 after 3906 usecs
[   27.968003] calling  streamer_init_module+0x0/0x16 @ 1
[   27.972010] bus: 'pci': add driver lanstreamer
[   27.976061] initcall streamer_init_module+0x0/0x16 returned 0 after 3906 usecs
[   27.984003] calling  catc_init+0x0/0x2d @ 1
[   27.988003] bus: 'usb': add driver catc
[   27.992056] usbcore: registered new interface driver catc
[   28.000002] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[   28.004006] initcall catc_init+0x0/0x2d returned 0 after 15625 usecs
[   28.004013] async/2 used greatest stack depth: 1884 bytes left
[   28.016003] calling  kaweth_init+0x0/0x16 @ 1
[   28.020003] bus: 'usb': add driver kaweth
[   28.024067] usbcore: registered new interface driver kaweth
[   28.032004] initcall kaweth_init+0x0/0x16 returned 0 after 11718 usecs
[   28.036003] calling  usb_rtl8150_init+0x0/0x20 @ 1
[   28.040002] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[   28.048002] bus: 'usb': add driver rtl8150
[   28.052055] usbcore: registered new interface driver rtl8150
[   28.060004] initcall usb_rtl8150_init+0x0/0x20 returned 0 after 19531 usecs
[   28.064003] calling  asix_init+0x0/0x16 @ 1
[   28.068002] bus: 'usb': add driver asix
[   28.072065] usbcore: registered new interface driver asix
[   28.080004] initcall asix_init+0x0/0x16 returned 0 after 11718 usecs
[   28.084003] calling  cdc_init+0x0/0x16 @ 1
[   28.088002] bus: 'usb': add driver cdc_ether
[   28.092055] usbcore: registered new interface driver cdc_ether
[   28.100004] initcall cdc_init+0x0/0x16 returned 0 after 11718 usecs
[   28.104003] calling  dm9601_init+0x0/0x16 @ 1
[   28.112002] bus: 'usb': add driver dm9601
[   28.116055] usbcore: registered new interface driver dm9601
[   28.120004] initcall dm9601_init+0x0/0x16 returned 0 after 7812 usecs
[   28.128003] calling  smsc75xx_init+0x0/0x16 @ 1
[   28.132002] bus: 'usb': add driver smsc75xx
[   28.136064] usbcore: registered new interface driver smsc75xx
[   28.140004] initcall smsc75xx_init+0x0/0x16 returned 0 after 7812 usecs
[   28.148003] calling  smsc95xx_init+0x0/0x16 @ 1
[   28.152002] bus: 'usb': add driver smsc95xx
[   28.156054] usbcore: registered new interface driver smsc95xx
[   28.160004] initcall smsc95xx_init+0x0/0x16 returned 0 after 7812 usecs
[   28.168003] calling  usbnet_init+0x0/0x16 @ 1
[   28.172002] bus: 'usb': add driver gl620a
[   28.176064] usbcore: registered new interface driver gl620a
[   28.184004] initcall usbnet_init+0x0/0x16 returned 0 after 11718 usecs
[   28.188003] calling  net1080_init+0x0/0x16 @ 1
[   28.192002] bus: 'usb': add driver net1080
[   28.196054] usbcore: registered new interface driver net1080
[   28.204004] initcall net1080_init+0x0/0x16 returned 0 after 11718 usecs
[   28.208003] calling  cdc_subset_init+0x0/0x16 @ 1
[   28.216002] bus: 'usb': add driver cdc_subset
[   28.220054] usbcore: registered new interface driver cdc_subset
[   28.224004] initcall cdc_subset_init+0x0/0x16 returned 0 after 7812 usecs
[   28.232003] calling  mcs7830_init+0x0/0x16 @ 1
[   28.236002] bus: 'usb': add driver MOSCHIP usb-ethernet driver
[   28.244056] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   28.248003] initcall mcs7830_init+0x0/0x16 returned 0 after 11718 usecs
[   28.256003] calling  usbnet_init+0x0/0x24 @ 1
[   28.260007] initcall usbnet_init+0x0/0x24 returned 0 after 0 usecs
[   28.268003] calling  int51x1_init+0x0/0x16 @ 1
[   28.272002] bus: 'usb': add driver int51x1
[   28.276056] usbcore: registered new interface driver int51x1
[   28.280004] initcall int51x1_init+0x0/0x16 returned 0 after 7812 usecs
[   28.288003] calling  usbpn_init+0x0/0x16 @ 1
[   28.292002] bus: 'usb': add driver cdc_phonet
[   28.296054] usbcore: registered new interface driver cdc_phonet
[   28.300003] initcall usbpn_init+0x0/0x16 returned 0 after 7812 usecs
[   28.308003] calling  ipheth_init+0x0/0x2f @ 1
[   28.312002] bus: 'usb': add driver ipheth
[   28.316054] usbcore: registered new interface driver ipheth
[   28.324004] initcall ipheth_init+0x0/0x2f returned 0 after 11718 usecs
[   28.328003] calling  airo_init_module+0x0/0xce @ 1
[   28.332012] airo(): Probing for PCI adapters
[   28.336012] bus: 'pci': add driver airo
[   28.340071] airo(): Finished probing for PCI adapters
[   28.348004] initcall airo_init_module+0x0/0xce returned 0 after 15625 usecs
[   28.352003] calling  prism54_module_init+0x0/0x2a @ 1
[   28.360002] Loaded prism54 driver, version 1.2
[   28.364011] bus: 'pci': add driver prism54
[   28.368063] initcall prism54_module_init+0x0/0x2a returned 0 after 7812 usecs
[   28.376003] calling  init_netconsole+0x0/0x1cb @ 1
[   28.380005] console [netcon0] enabled
[   28.384005] netconsole: network logging started
[   28.388004] initcall init_netconsole+0x0/0x1cb returned 0 after 7812 usecs
[   28.396003] calling  efx_init_module+0x0/0xb3 @ 1
[   28.400001] Solarflare NET driver v3.0
[   28.404077] bus: 'pci': add driver sfc
[   28.408085] initcall efx_init_module+0x0/0xb3 returned 0 after 7812 usecs
[   28.412004] calling  zatm_init_module+0x0/0x16 @ 1
[   28.416012] bus: 'pci': add driver zatm
[   28.420065] initcall zatm_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.424028] calling  uPD98402_module_init+0x0/0x7 @ 1
[   28.428004] initcall uPD98402_module_init+0x0/0x7 returned 0 after 0 usecs
[   28.432003] calling  nicstar_init+0x0/0x5b @ 1
[   28.436011] bus: 'pci': add driver nicstar
[   28.440076] initcall nicstar_init+0x0/0x5b returned 0 after 3906 usecs
[   28.444004] calling  hrz_module_init+0x0/0xb1 @ 1
[   28.448003] Madge ATM Horizon [Ultra] driver version 1.2.1
[   28.452012] bus: 'pci': add driver horizon
[   28.456063] initcall hrz_module_init+0x0/0xb1 returned 0 after 7812 usecs
[   28.460006] calling  fore200e_module_init+0x0/0x20 @ 1
[   28.464002] fore200e: FORE Systems 200E-series ATM driver - version 0.3e
[   28.468011] bus: 'pci': add driver fore_200e
[   28.472063] initcall fore200e_module_init+0x0/0x20 returned 0 after 7812 usecs
[   28.476005] calling  eni_init+0x0/0x16 @ 1
[   28.480011] bus: 'pci': add driver eni
[   28.484062] initcall eni_init+0x0/0x16 returned 0 after 3906 usecs
[   28.488004] calling  idt77252_init+0x0/0x2a @ 1
[   28.492002] idt77252_init: at 4230ec71
[   28.496011] bus: 'pci': add driver idt77252
[   28.500063] initcall idt77252_init+0x0/0x2a returned 0 after 7812 usecs
[   28.504005] calling  solos_pci_init+0x0/0x25 @ 1
[   28.508002] Solos PCI Driver Version 0.07
[   28.512012] bus: 'pci': add driver solos
[   28.516072] initcall solos_pci_init+0x0/0x25 returned 0 after 7812 usecs
[   28.520004] calling  adummy_init+0x0/0xda @ 1
[   28.524002] adummy: version 1.0
[   28.527160] device: 'adummy0': device_add
[   28.528012] PM: Adding info for No Bus:adummy0
[   28.532070] initcall adummy_init+0x0/0xda returned 0 after 7812 usecs
[   28.536004] calling  atmtcp_init+0x0/0x11 @ 1
[   28.540004] initcall atmtcp_init+0x0/0x11 returned 0 after 0 usecs
[   28.544003] calling  i2o_iop_init+0x0/0x44 @ 1
[   28.548002] I2O subsystem v1.325
[   28.552002] i2o: max drivers = 8
[   28.555292] bus: 'i2o': registered
[   28.556045] bus: 'i2o': add driver exec-osm
[   28.560068] bus: 'pci': add driver PCI_I2O
[   28.564070] initcall i2o_iop_init+0x0/0x44 returned 0 after 15625 usecs
[   28.572003] calling  i2o_config_init+0x0/0x8c @ 1
[   28.576001] I2O Configuration OSM v1.323
[   28.580002] bus: 'i2o': add driver config-osm
[   28.584057] device: 'i2octl': device_add
[   28.588165] PM: Adding info for No Bus:i2octl
[   28.592053] initcall i2o_config_init+0x0/0x8c returned 0 after 15625 usecs
[   28.600003] calling  i2o_scsi_init+0x0/0x37 @ 1
[   28.604001] I2O SCSI Peripheral OSM v1.316
[   28.608002] bus: 'i2o': add driver scsi-osm
[   28.612054] initcall i2o_scsi_init+0x0/0x37 returned 0 after 7812 usecs
[   28.620005] calling  i2o_proc_init+0x0/0x1af @ 1
[   28.624002] I2O ProcFS OSM v1.316
[   28.628002] bus: 'i2o': add driver proc-osm
[   28.632064] initcall i2o_proc_init+0x0/0x1af returned 0 after 7812 usecs
[   28.640003] calling  fusion_init+0x0/0x10a @ 1
[   28.644002] Fusion MPT base driver 3.04.15
[   28.648001] Copyright (c) 1999-2008 LSI Corporation
[   28.652017] initcall fusion_init+0x0/0x10a returned 0 after 7812 usecs
[   28.660003] calling  mptspi_init+0x0/0xb9 @ 1
[   28.664002] Fusion MPT SPI Host driver 3.04.15
[   28.668017] bus: 'pci': add driver mptspi
[   28.672082] initcall mptspi_init+0x0/0xb9 returned 0 after 7812 usecs
[   28.680003] calling  mptsas_init+0x0/0xe5 @ 1
[   28.684002] Fusion MPT SAS Host driver 3.04.15
[   28.688025] bus: 'pci': add driver mptsas
[   28.692065] initcall mptsas_init+0x0/0xe5 returned 0 after 7812 usecs
[   28.696003] calling  mptctl_init+0x0/0x114 @ 1
[   28.704002] Fusion MPT misc device (ioctl) driver 3.04.15
[   28.708007] device: 'mptctl': device_add
[   28.712099] PM: Adding info for No Bus:mptctl
[   28.716049] mptctl: Registered with Fusion MPT base driver
[   28.720002] mptctl: /dev/mptctl @ (major,minor=10,220)
[   28.728004] initcall mptctl_init+0x0/0x114 returned 0 after 23437 usecs
[   28.732003] calling  fw_core_init+0x0/0x7b @ 1
[   28.736074] bus: 'firewire': registered
[   28.740012] initcall fw_core_init+0x0/0x7b returned 0 after 3906 usecs
[   28.748005] calling  fw_ohci_init+0x0/0x16 @ 1
[   28.752014] bus: 'pci': add driver firewire_ohci
[   28.756071] initcall fw_ohci_init+0x0/0x16 returned 0 after 3906 usecs
[   28.764003] calling  sbp2_init+0x0/0x39 @ 1
[   28.768039] bus: 'firewire': add driver sbp2
[   28.772059] initcall sbp2_init+0x0/0x39 returned 0 after 3906 usecs
[   28.776004] calling  fwnet_init+0x0/0x64 @ 1
[   28.780175] bus: 'firewire': add driver net
[   28.784055] initcall fwnet_init+0x0/0x64 returned 0 after 3906 usecs
[   28.788004] calling  uio_init+0x0/0x7 @ 1
[   28.792003] initcall uio_init+0x0/0x7 returned 0 after 0 usecs
[   28.796003] calling  hilscher_init_module+0x0/0x16 @ 1
[   28.800014] bus: 'pci': add driver hilscher
[   28.804069] initcall hilscher_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.808004] calling  uio_pdrv_init+0x0/0xf @ 1
[   28.812006] bus: 'platform': add driver uio_pdrv
[   28.816070] initcall uio_pdrv_init+0x0/0xf returned 0 after 3906 usecs
[   28.820003] calling  uio_pdrv_genirq_init+0x0/0xf @ 1
[   28.824004] bus: 'platform': add driver uio_pdrv_genirq
[   28.832004] initcall uio_pdrv_genirq_init+0x0/0xf returned 0 after 7812 usecs
[   28.836004] calling  sercos3_init_module+0x0/0x16 @ 1
[   28.840012] bus: 'pci': add driver sercos3
[   28.844065] initcall sercos3_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.848004] calling  init+0x0/0x20 @ 1
[   28.852002] Generic UIO driver for PCI 2.3 devices version: 0.01.0
[   28.856011] bus: 'pci': add driver uio_pci_generic
[   28.860063] initcall init+0x0/0x20 returned 0 after 7812 usecs
[   28.864003] calling  netx_init_module+0x0/0x16 @ 1
[   28.868011] bus: 'pci': add driver netx
[   28.872064] initcall netx_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.876003] calling  cdrom_init+0x0/0x7 @ 1
[   28.880003] initcall cdrom_init+0x0/0x7 returned 0 after 0 usecs
[   28.884004] calling  yenta_socket_init+0x0/0x16 @ 1
[   28.888012] bus: 'pci': add driver yenta_cardbus
[   28.892066] initcall yenta_socket_init+0x0/0x16 returned 0 after 3906 usecs
[   28.896004] calling  aoe_init+0x0/0x9d @ 1
[   28.900017] device class 'aoe': registering
[   28.904062] device: 'err': device_add
[   28.908169] PM: Adding info for No Bus:err
[   28.912056] device: 'discover': device_add
[   28.916073] PM: Adding info for No Bus:discover
[   28.920056] device: 'interfaces': device_add
[   28.924097] PM: Adding info for No Bus:interfaces
[   28.928058] device: 'revalidate': device_add
[   28.932077] PM: Adding info for No Bus:revalidate
[   28.936055] device: 'flush': device_add
[   28.940072] PM: Adding info for No Bus:flush
[   28.944219] aoe: AoE v47 initialised.
[   28.948049] initcall aoe_init+0x0/0x9d returned 0 after 46875 usecs
[   28.952003] calling  uwb_subsys_init+0x0/0x46 @ 1
[   28.956005] device class 'uwb_rc': registering
[   28.960074] initcall uwb_subsys_init+0x0/0x46 returned 0 after 3906 usecs
[   28.964003] calling  wlp_subsys_init+0x0/0x7 @ 1
[   28.968005] initcall wlp_subsys_init+0x0/0x7 returned 0 after 0 usecs
[   28.972003] calling  umc_bus_init+0x0/0xf @ 1
[   28.976064] bus: 'umc': registered
[   28.980004] initcall umc_bus_init+0x0/0xf returned 0 after 3906 usecs
[   28.984003] calling  whci_init+0x0/0x16 @ 1
[   28.988015] bus: 'pci': add driver whci
[   28.992076] initcall whci_init+0x0/0x16 returned 0 after 3906 usecs
[   28.996003] calling  whcrc_driver_init+0x0/0x16 @ 1
[   29.000002] bus: 'umc': add driver whc-rc
[   29.004064] initcall whcrc_driver_init+0x0/0x16 returned 0 after 3906 usecs
[   29.008004] calling  hwarc_driver_init+0x0/0x16 @ 1
[   29.012004] bus: 'usb': add driver hwa-rc
[   29.016059] usbcore: registered new interface driver hwa-rc
[   29.020004] initcall hwarc_driver_init+0x0/0x16 returned 0 after 7812 usecs
[   29.024005] calling  i1480_dfu_driver_init+0x0/0x16 @ 1
[   29.028003] bus: 'usb': add driver i1480-dfu-usb
[   29.032055] usbcore: registered new interface driver i1480-dfu-usb
[   29.036004] initcall i1480_dfu_driver_init+0x0/0x16 returned 0 after 7812 usecs
[   29.040004] calling  i1480_est_init+0x0/0x73 @ 1
[   29.044006] initcall i1480_est_init+0x0/0x73 returned 0 after 0 usecs
[   29.048004] calling  i1480u_driver_init+0x0/0x16 @ 1
[   29.052003] bus: 'usb': add driver i1480u_wlp
[   29.056056] usbcore: registered new interface driver i1480u_wlp
[   29.060004] initcall i1480u_driver_init+0x0/0x16 returned 0 after 7812 usecs
[   29.064004] calling  gpio_vbus_init+0x0/0x14 @ 1
[   29.068005] bus: 'platform': add driver gpio-vbus
[   29.072059] bus: 'platform': remove driver gpio-vbus
[   29.076051] driver: 'gpio-vbus': driver_release
[   29.080008] initcall gpio_vbus_init+0x0/0x14 returned -19 after 11718 usecs
[   29.084003] calling  mon_init+0x0/0xee @ 1
[   29.088011] device class 'usbmon': registering
[   29.092085] device: 'usbmon0': device_add
[   29.096144] PM: Adding info for No Bus:usbmon0
[   29.100058] initcall mon_init+0x0/0xee returned 0 after 11718 usecs
[   29.104003] calling  ehci_hcd_init+0x0/0xa4 @ 1
[   29.108002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   29.112016] bus: 'pci': add driver ehci_hcd
[   29.116020] bus: 'pci': driver_probe_device: matched device 0000:00:02.1 with driver ehci_hcd
[   29.120002] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:02.1
[   29.124041] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
[   29.128003] ehci_hcd 0000:00:02.1: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.1 setup!
[   29.132012] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
[   29.136070] initcall ehci_hcd_init+0x0/0xa4 returned 0 after 27343 usecs
[   29.140003] calling  oxu_module_init+0x0/0xf @ 1
[   29.144004] bus: 'platform': add driver oxu210hp-hcd
[   29.148061] initcall oxu_module_init+0x0/0xf returned 0 after 3906 usecs
[   29.152003] calling  ohci_hcd_mod_init+0x0/0xa1 @ 1
[   29.156002] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   29.160013] bus: 'pci': add driver ohci_hcd
[   29.164011] bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver ohci_hcd
[   29.168003] bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:00:02.0
[   29.172035] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
[   29.176002] ohci_hcd 0000:00:02.0: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.0 setup!
[   29.180012] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
[   29.184076] bus: 'platform': add driver sm501-usb
[   29.188058] initcall ohci_hcd_mod_init+0x0/0xa1 returned 0 after 31250 usecs
[   29.192003] calling  uhci_hcd_init+0x0/0xa4 @ 1
[   29.196003] uhci_hcd: USB Universal Host Controller Interface driver
[   29.200181] bus: 'pci': add driver uhci_hcd
[   29.204066] initcall uhci_hcd_init+0x0/0xa4 returned 0 after 7812 usecs
[   29.208005] calling  xhci_hcd_init+0x0/0x25 @ 1
[   29.212012] bus: 'pci': add driver xhci_hcd
[   29.216064] initcall xhci_hcd_init+0x0/0x25 returned 0 after 3906 usecs
[   29.220004] calling  sl811h_init+0x0/0x36 @ 1
[   29.224002] sl811: driver sl811-hcd, 19 May 2005
[   29.228004] bus: 'platform': add driver sl811-hcd
[   29.232056] initcall sl811h_init+0x0/0x36 returned 0 after 7812 usecs
[   29.236003] calling  c67x00_init+0x0/0xf @ 1
[   29.240003] bus: 'platform': add driver c67x00
[   29.244056] initcall c67x00_init+0x0/0xf returned 0 after 3906 usecs
[   29.248004] calling  wusbcore_init+0x0/0x66 @ 1
[   29.252086] initcall wusbcore_init+0x0/0x66 returned 0 after 0 usecs
[   29.260004] calling  acm_init+0x0/0xcb @ 1
[   29.264012] bus: 'usb': add driver cdc_acm
[   29.268062] usbcore: registered new interface driver cdc_acm
[   29.276002] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[   29.284004] initcall acm_init+0x0/0xcb returned 0 after 19531 usecs
[   29.288003] calling  usblp_init+0x0/0x16 @ 1
[   29.292003] bus: 'usb': add driver usblp
[   29.296056] usbcore: registered new interface driver usblp
[   29.304004] initcall usblp_init+0x0/0x16 returned 0 after 11718 usecs
[   29.308003] calling  wdm_init+0x0/0x16 @ 1
[   29.312003] bus: 'usb': add driver cdc_wdm
[   29.316066] usbcore: registered new interface driver cdc_wdm
[   29.324004] initcall wdm_init+0x0/0x16 returned 0 after 11718 usecs
[   29.328003] calling  usbtmc_init+0x0/0x2d @ 1
[   29.332003] bus: 'usb': add driver usbtmc
[   29.336056] usbcore: registered new interface driver usbtmc
[   29.344004] initcall usbtmc_init+0x0/0x2d returned 0 after 11718 usecs
[   29.348003] calling  usb_stor_init+0x0/0x42 @ 1
[   29.356002] Initializing USB Mass Storage driver...
[   29.360003] bus: 'usb': add driver usb-storage
[   29.364057] usbcore: registered new interface driver usb-storage
[   29.368002] USB Mass Storage support registered.
[   29.376004] initcall usb_stor_init+0x0/0x42 returned 0 after 19531 usecs
[   29.380003] calling  usb_usual_init+0x0/0x30 @ 1
[   29.384003] bus: 'usb': add driver libusual
[   29.388065] usbcore: registered new interface driver libusual
[   29.396004] initcall usb_usual_init+0x0/0x30 returned 0 after 11718 usecs
[   29.404003] calling  alauda_init+0x0/0x16 @ 1
[   29.408003] bus: 'usb': add driver ums-alauda
[   29.412056] usbcore: registered new interface driver ums-alauda
[   29.416004] initcall alauda_init+0x0/0x16 returned 0 after 7812 usecs
[   29.424003] calling  cypress_init+0x0/0x16 @ 1
[   29.428003] bus: 'usb': add driver ums-cypress
[   29.432056] usbcore: registered new interface driver ums-cypress
[   29.440004] initcall cypress_init+0x0/0x16 returned 0 after 11718 usecs
[   29.444003] calling  datafab_init+0x0/0x16 @ 1
[   29.448003] bus: 'usb': add driver ums-datafab
[   29.452056] usbcore: registered new interface driver ums-datafab
[   29.460004] initcall datafab_init+0x0/0x16 returned 0 after 11718 usecs
[   29.468003] calling  freecom_init+0x0/0x16 @ 1
[   29.472003] bus: 'usb': add driver ums-freecom
[   29.476065] usbcore: registered new interface driver ums-freecom
[   29.480004] initcall freecom_init+0x0/0x16 returned 0 after 7812 usecs
[   29.488003] calling  isd200_init+0x0/0x16 @ 1
[   29.492003] bus: 'usb': add driver ums-isd200
[   29.496056] usbcore: registered new interface driver ums-isd200
[   29.504005] initcall isd200_init+0x0/0x16 returned 0 after 11718 usecs
[   29.508003] calling  onetouch_init+0x0/0x16 @ 1
[   29.512003] bus: 'usb': add driver ums-onetouch
[   29.520056] usbcore: registered new interface driver ums-onetouch
[   29.524004] initcall onetouch_init+0x0/0x16 returned 0 after 11718 usecs
[   29.532003] calling  sddr09_init+0x0/0x16 @ 1
[   29.536003] bus: 'usb': add driver ums-sddr09
[   29.540067] usbcore: registered new interface driver ums-sddr09
[   29.544004] initcall sddr09_init+0x0/0x16 returned 0 after 7812 usecs
[   29.552003] calling  usbat_init+0x0/0x16 @ 1
[   29.556003] bus: 'usb': add driver ums-usbat
[   29.560056] usbcore: registered new interface driver ums-usbat
[   29.568004] initcall usbat_init+0x0/0x16 returned 0 after 11718 usecs
[   29.572003] calling  usb_mdc800_init+0x0/0x307 @ 1
[   29.580011] bus: 'usb': add driver mdc800
[   29.584031] usbcore: registered new interface driver mdc800
[   29.588002] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[   29.596004] initcall usb_mdc800_init+0x0/0x307 returned 0 after 15625 usecs
[   29.604003] calling  microtek_drv_init+0x0/0x16 @ 1
[   29.608003] bus: 'usb': add driver microtekX6
[   29.612056] usbcore: registered new interface driver microtekX6
[   29.616004] initcall microtek_drv_init+0x0/0x16 returned 0 after 7812 usecs
[   29.624003] calling  usb_serial_init+0x0/0x1cd @ 1
[   29.628081] bus: 'usb-serial': registered
[   29.632023] bus: 'usb': add driver usbserial
[   29.636056] usbcore: registered new interface driver usbserial
[   29.644002] usbserial: USB Serial Driver core
[   29.648004] initcall usb_serial_init+0x0/0x1cd returned 0 after 19531 usecs
[   29.656003] calling  aircable_init+0x0/0x3a @ 1
[   29.660003] bus: 'usb-serial': add driver aircable
[   29.664055] USB Serial support registered for aircable
[   29.668003] bus: 'usb': add driver aircable
[   29.672055] usbcore: registered new interface driver aircable
[   29.680004] initcall aircable_init+0x0/0x3a returned 0 after 19531 usecs
[   29.688003] calling  ark3116_init+0x0/0x4f @ 1
[   29.692002] bus: 'usb-serial': add driver ark3116
[   29.696054] USB Serial support registered for ark3116
[   29.700003] bus: 'usb': add driver ark3116
[   29.704055] usbcore: registered new interface driver ark3116
[   29.712002] ark3116:v0.6:USB ARK3116 serial/IrDA driver
[   29.716004] initcall ark3116_init+0x0/0x4f returned 0 after 23437 usecs
[   29.720003] calling  belkin_sa_init+0x0/0x49 @ 1
[   29.728002] bus: 'usb-serial': add driver belkin
[   29.732054] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[   29.740003] bus: 'usb': add driver belkin
[   29.744055] usbcore: registered new interface driver belkin
[   29.748002] belkin_sa: v1.3:USB Belkin Serial converter driver
[   29.756004] initcall belkin_sa_init+0x0/0x49 returned 0 after 27343 usecs
[   29.760004] calling  ch341_init+0x0/0x3a @ 1
[   29.768002] bus: 'usb-serial': add driver ch341-uart
[   29.772063] USB Serial support registered for ch341-uart
[   29.776004] bus: 'usb': add driver ch341
[   29.780055] usbcore: registered new interface driver ch341
[   29.784004] initcall ch341_init+0x0/0x3a returned 0 after 15625 usecs
[   29.792003] calling  cp210x_init+0x0/0x49 @ 1
[   29.796002] bus: 'usb-serial': add driver cp210x
[   29.800054] USB Serial support registered for cp210x
[   29.808006] bus: 'usb': add driver cp210x
[   29.812060] usbcore: registered new interface driver cp210x
[   29.816002] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[   29.824004] initcall cp210x_init+0x0/0x49 returned 0 after 27343 usecs
[   29.828003] calling  cyberjack_init+0x0/0x54 @ 1
[   29.832002] bus: 'usb-serial': add driver cyberjack
[   29.840054] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[   29.848003] bus: 'usb': add driver cyberjack
[   29.852055] usbcore: registered new interface driver cyberjack
[   29.856002] cyberjack: v1.01 Matthias Bruestle
[   29.860002] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[   29.868004] initcall cyberjack_init+0x0/0x54 returned 0 after 35156 usecs
[   29.876003] calling  cypress_init+0x0/0x9d @ 1
[   29.880002] bus: 'usb-serial': add driver earthmate
[   29.884054] USB Serial support registered for DeLorme Earthmate USB
[   29.892002] bus: 'usb-serial': add driver cyphidcom
[   29.896054] USB Serial support registered for HID->COM RS232 Adapter
[   29.904002] bus: 'usb-serial': add driver nokiaca42v2
[   29.908054] USB Serial support registered for Nokia CA-42 V2 Adapter
[   29.912003] bus: 'usb': add driver cypress
[   29.916073] usbcore: registered new interface driver cypress
[   29.924002] cypress_m8: v1.10:Cypress USB to Serial Driver
[   29.928004] initcall cypress_init+0x0/0x9d returned 0 after 46875 usecs
[   29.936003] calling  debug_init+0x0/0x3a @ 1
[   29.940002] bus: 'usb-serial': add driver debug
[   29.944054] USB Serial support registered for debug
[   29.948003] bus: 'usb': add driver debug
[   29.952055] usbcore: registered new interface driver debug
[   29.960004] initcall debug_init+0x0/0x3a returned 0 after 19531 usecs
[   29.964003] calling  edgeport_init+0x0/0xa5 @ 1
[   29.968002] bus: 'usb-serial': add driver edgeport_2
[   29.976054] USB Serial support registered for Edgeport 2 port adapter
[   29.980002] bus: 'usb-serial': add driver edgeport_4
[   29.988054] USB Serial support registered for Edgeport 4 port adapter
[   29.992002] bus: 'usb-serial': add driver edgeport_8
[   29.996054] USB Serial support registered for Edgeport 8 port adapter
[   30.004002] bus: 'usb-serial': add driver epic
[   30.008054] USB Serial support registered for EPiC device
[   30.016004] bus: 'usb': add driver io_edgeport
[   30.020055] usbcore: registered new interface driver io_edgeport
[   30.024002] io_edgeport: v2.7:Edgeport USB Serial Driver
[   30.028004] initcall edgeport_init+0x0/0xa5 returned 0 after 58593 usecs
[   30.036003] calling  edgeport_init+0x0/0x63 @ 1
[   30.040002] bus: 'usb-serial': add driver edgeport_ti_1
[   30.048064] USB Serial support registered for Edgeport TI 1 port adapter
[   30.052003] bus: 'usb-serial': add driver edgeport_ti_2
[   30.060054] USB Serial support registered for Edgeport TI 2 port adapter
[   30.064003] bus: 'usb': add driver io_ti
[   30.068055] usbcore: registered new interface driver io_ti
[   30.076002] io_ti: v0.7mode043006:Edgeport USB Serial Driver
[   30.080004] initcall edgeport_init+0x0/0x63 returned 0 after 39062 usecs
[   30.088003] calling  empeg_init+0x0/0x49 @ 1
[   30.092002] bus: 'usb-serial': add driver empeg
[   30.096066] USB Serial support registered for empeg
[   30.100004] bus: 'usb': add driver empeg
[   30.104055] usbcore: registered new interface driver empeg
[   30.112002] empeg: v1.3:USB Empeg Mark I/II Driver
[   30.116004] initcall empeg_init+0x0/0x49 returned 0 after 23437 usecs
[   30.120003] calling  funsoft_init+0x0/0x3a @ 1
[   30.124002] bus: 'usb-serial': add driver funsoft
[   30.132054] USB Serial support registered for funsoft
[   30.136003] bus: 'usb': add driver funsoft
[   30.140055] usbcore: registered new interface driver funsoft
[   30.144004] initcall funsoft_init+0x0/0x3a returned 0 after 19531 usecs
[   30.152003] calling  garmin_init+0x0/0x49 @ 1
[   30.156002] bus: 'usb-serial': add driver garmin_gps
[   30.160054] USB Serial support registered for Garmin GPS usb/tty
[   30.168003] bus: 'usb': add driver garmin_gps
[   30.172063] usbcore: registered new interface driver garmin_gps
[   30.176002] garmin_gps: v0.33:garmin gps driver
[   30.184004] initcall garmin_init+0x0/0x49 returned 0 after 27343 usecs
[   30.188003] calling  hp49gp_init+0x0/0x49 @ 1
[   30.192003] bus: 'usb-serial': add driver hp4X
[   30.196055] USB Serial support registered for hp4X
[   30.204003] bus: 'usb': add driver hp4X
[   30.208055] usbcore: registered new interface driver hp4X
[   30.212002] hp4x: v1.00:HP4x (48/49) Generic Serial driver
[   30.216004] initcall hp49gp_init+0x0/0x49 returned 0 after 23437 usecs
[   30.224003] calling  iuu_init+0x0/0x49 @ 1
[   30.228002] bus: 'usb-serial': add driver iuu_phoenix
[   30.232054] USB Serial support registered for iuu_phoenix
[   30.240003] bus: 'usb': add driver iuu_phoenix
[   30.244055] usbcore: registered new interface driver iuu_phoenix
[   30.248002] iuu_phoenix: v0.11:Infinity USB Unlimited Phoenix driver
[   30.256004] initcall iuu_init+0x0/0x49 returned 0 after 27343 usecs
[   30.260003] calling  keyspan_pda_init+0x0/0x7d @ 1
[   30.268002] bus: 'usb-serial': add driver keyspan_pda
[   30.272055] USB Serial support registered for Keyspan PDA
[   30.276003] bus: 'usb-serial': add driver keyspan_pda_pre
[   30.284054] USB Serial support registered for Keyspan PDA - (prerenumeration)
[   30.288002] bus: 'usb-serial': add driver xircom_no_firm
[   30.296054] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[   30.304003] bus: 'usb': add driver keyspan_pda
[   30.308056] usbcore: registered new interface driver keyspan_pda
[   30.312002] keyspan_pda: v1.1:USB Keyspan PDA Converter driver
[   30.320004] initcall keyspan_pda_init+0x0/0x7d returned 0 after 50781 usecs
[   30.328003] calling  klsi_105_init+0x0/0x49 @ 1
[   30.332002] bus: 'usb-serial': add driver kl5kusb105d
[   30.336064] USB Serial support registered for KL5KUSB105D / PalmConnect
[   30.344004] bus: 'usb': add driver kl5kusb105d
[   30.348055] usbcore: registered new interface driver kl5kusb105d
[   30.352002] kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
[   30.360004] initcall klsi_105_init+0x0/0x49 returned 0 after 27343 usecs
[   30.368003] calling  kobil_init+0x0/0x49 @ 1
[   30.372003] bus: 'usb-serial': add driver kobil
[   30.376055] USB Serial support registered for KOBIL USB smart card terminal
[   30.384003] bus: 'usb': add driver kobil
[   30.388064] usbcore: registered new interface driver kobil
[   30.392002] kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
[   30.400004] initcall kobil_init+0x0/0x49 returned 0 after 27343 usecs
[   30.408003] calling  mct_u232_init+0x0/0x49 @ 1
[   30.412003] bus: 'usb-serial': add driver mct_u232
[   30.416055] USB Serial support registered for MCT U232
[   30.420003] bus: 'usb': add driver mct_u232
[   30.424055] usbcore: registered new interface driver mct_u232
[   30.432002] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
[   30.440004] initcall mct_u232_init+0x0/0x49 returned 0 after 27343 usecs
[   30.444003] calling  moschip7720_init+0x0/0x67 @ 1
[   30.448003] bus: 'usb-serial': add driver moschip7720
[   30.456054] USB Serial support registered for Moschip 2 port adapter
[   30.460002] mos7720: 2.1:Moschip USB Serial Driver
[   30.468003] bus: 'usb': add driver moschip7720
[   30.472067] usbcore: registered new interface driver moschip7720
[   30.476005] initcall moschip7720_init+0x0/0x67 returned 0 after 27343 usecs
[   30.484003] calling  moto_init+0x0/0x3a @ 1
[   30.488003] bus: 'usb-serial': add driver moto-modem
[   30.492064] USB Serial support registered for moto-modem
[   30.500004] bus: 'usb': add driver moto-modem
[   30.504055] usbcore: registered new interface driver moto-modem
[   30.508004] initcall moto_init+0x0/0x3a returned 0 after 19531 usecs
[   30.516003] calling  navman_init+0x0/0x3a @ 1
[   30.520003] bus: 'usb-serial': add driver navman
[   30.524054] USB Serial support registered for navman
[   30.528004] bus: 'usb': add driver navman
[   30.532055] usbcore: registered new interface driver navman
[   30.540004] initcall navman_init+0x0/0x3a returned 0 after 19531 usecs
[   30.544003] calling  omninet_init+0x0/0x49 @ 1
[   30.548002] bus: 'usb-serial': add driver omninet
[   30.556055] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[   30.560003] bus: 'usb': add driver omninet
[   30.564055] usbcore: registered new interface driver omninet
[   30.572002] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
[   30.576004] initcall omninet_init+0x0/0x49 returned 0 after 27343 usecs
[   30.584003] calling  opticon_init+0x0/0x3a @ 1
[   30.588003] bus: 'usb-serial': add driver opticon
[   30.592055] USB Serial support registered for opticon
[   30.596003] bus: 'usb': add driver opticon
[   30.600055] usbcore: registered new interface driver opticon
[   30.608004] initcall opticon_init+0x0/0x3a returned 0 after 19531 usecs
[   30.612003] calling  option_init+0x0/0x49 @ 1
[   30.620003] bus: 'usb-serial': add driver option1
[   30.624075] USB Serial support registered for GSM modem (1-port)
[   30.628004] bus: 'usb': add driver option
[   30.632071] usbcore: registered new interface driver option
[   30.640002] option: v0.7.2:USB Driver for GSM modems
[   30.644004] initcall option_init+0x0/0x49 returned 0 after 23437 usecs
[   30.652003] calling  oti6858_init+0x0/0x3a @ 1
[   30.656003] bus: 'usb-serial': add driver oti6858
[   30.660062] USB Serial support registered for oti6858
[   30.664004] bus: 'usb': add driver oti6858
[   30.668056] usbcore: registered new interface driver oti6858
[   30.676004] initcall oti6858_init+0x0/0x3a returned 0 after 19531 usecs
[   30.680003] calling  qcaux_init+0x0/0x3a @ 1
[   30.684002] bus: 'usb-serial': add driver qcaux
[   30.688054] USB Serial support registered for qcaux
[   30.696003] bus: 'usb': add driver qcaux
[   30.700055] usbcore: registered new interface driver qcaux
[   30.704004] initcall qcaux_init+0x0/0x3a returned 0 after 19531 usecs
[   30.712003] calling  siemens_usb_mpi_init+0x0/0x54 @ 1
[   30.716003] bus: 'usb-serial': add driver siemens_mpi
[   30.720054] USB Serial support registered for siemens_mpi
[   30.728004] bus: 'usb': add driver siemens_mpi
[   30.732056] usbcore: registered new interface driver siemens_mpi
[   30.736002] Driver for Siemens USB/MPI adapter
[   30.740002] Version 0.1 09/26/2005 Thomas Hergenhahn-S0/GAf8tV78@public.gmane.org http://libnodave.sf.net
[   30.748004] initcall siemens_usb_mpi_init+0x0/0x54 returned 0 after 31250 usecs
[   30.756003] calling  sierra_init+0x0/0x49 @ 1
[   30.760003] bus: 'usb-serial': add driver sierra
[   30.764055] USB Serial support registered for Sierra USB modem
[   30.772004] bus: 'usb': add driver sierra
[   30.776064] usbcore: registered new interface driver sierra
[   30.780002] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[   30.788005] initcall sierra_init+0x0/0x49 returned 0 after 27343 usecs
[   30.792003] calling  symbol_init+0x0/0x3a @ 1
[   30.796003] bus: 'usb-serial': add driver symbol
[   30.804060] USB Serial support registered for symbol
[   30.808004] bus: 'usb': add driver symbol
[   30.812055] usbcore: registered new interface driver symbol
[   30.816008] initcall symbol_init+0x0/0x3a returned 0 after 19531 usecs
[   30.824003] calling  ti_init+0x0/0x12e @ 1
[   30.828003] bus: 'usb-serial': add driver ti_usb_3410_5052_1
[   30.832055] USB Serial support registered for TI USB 3410 1 port adapter
[   30.840003] bus: 'usb-serial': add driver ti_usb_3410_5052_2
[   30.844054] USB Serial support registered for TI USB 5052 2 port adapter
[   30.852004] bus: 'usb': add driver ti_usb_3410_5052
[   30.856055] usbcore: registered new interface driver ti_usb_3410_5052
[   30.864002] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[   30.872004] initcall ti_init+0x0/0x12e returned 0 after 42968 usecs
[   30.876004] calling  visor_init+0x0/0x15e @ 1
[   30.880003] bus: 'usb-serial': add driver visor
[   30.884064] USB Serial support registered for Handspring Visor / Palm OS
[   30.892003] bus: 'usb-serial': add driver clie_3.5
[   30.896054] USB Serial support registered for Sony Clie 3.5
[   30.904003] bus: 'usb-serial': add driver clie_5
[   30.908063] USB Serial support registered for Sony Clie 5.0
[   30.912004] bus: 'usb': add driver visor
[   30.916055] usbcore: registered new interface driver visor
[   30.924002] visor: USB HandSpring Visor / Palm OS driver
[   30.928004] initcall visor_init+0x0/0x15e returned 0 after 46875 usecs
[   30.936003] calling  vivopay_serial_init+0x0/0x49 @ 1
[   30.940003] bus: 'usb-serial': add driver vivopay-serial
[   30.944055] USB Serial support registered for vivopay-serial
[   30.952004] bus: 'usb': add driver vivopay-serial
[   30.956055] usbcore: registered new interface driver vivopay-serial
[   30.960002] vivopay_serial: v1.0:ViVOpay USB Serial Driver
[   30.968004] initcall vivopay_serial_init+0x0/0x49 returned 0 after 27343 usecs
[   30.972003] calling  zio_init+0x0/0x3a @ 1
[   30.976003] bus: 'usb-serial': add driver zio
[   30.984055] USB Serial support registered for zio
[   30.988004] bus: 'usb': add driver zio
[   30.992055] usbcore: registered new interface driver zio
[   30.996004] initcall zio_init+0x0/0x3a returned 0 after 19531 usecs
[   31.004003] calling  appledisplay_init+0x0/0x4b @ 1
[   31.008081] bus: 'usb': add driver appledisplay
[   31.012067] usbcore: registered new interface driver appledisplay
[   31.016005] initcall appledisplay_init+0x0/0x4b returned 0 after 7812 usecs
[   31.020004] calling  cypress_init+0x0/0x2f @ 1
[   31.024005] bus: 'usb': add driver cypress_cy7c63
[   31.028066] usbcore: registered new interface driver cypress_cy7c63
[   31.032006] initcall cypress_init+0x0/0x2f returned 0 after 7812 usecs
[   31.036003] calling  emi26_init+0x0/0x16 @ 1
[   31.040005] bus: 'usb': add driver emi26 - firmware loader
[   31.044061] usbcore: registered new interface driver emi26 - firmware loader
[   31.048005] initcall emi26_init+0x0/0x16 returned 0 after 7812 usecs
[   31.052003] calling  emi62_init+0x0/0x2d @ 1
[   31.056005] bus: 'usb': add driver emi62 - firmware loader
[   31.060069] usbcore: registered new interface driver emi62 - firmware loader
[   31.064004] initcall emi62_init+0x0/0x2d returned 0 after 7812 usecs
[   31.068004] calling  ftdi_elan_init+0x0/0x127 @ 1
[   31.072002] driver ftdi-elan built at 12:25:45 on Jun 11 2010
[   31.076047] bus: 'usb': add driver ftdi-elan
[   31.080062] usbcore: registered new interface driver ftdi-elan
[   31.088004] initcall ftdi_elan_init+0x0/0x127 returned 0 after 15625 usecs
[   31.092003] calling  usb_idmouse_init+0x0/0x3a @ 1
[   31.096002] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
[   31.104004] bus: 'usb': add driver idmouse
[   31.108057] usbcore: registered new interface driver idmouse
[   31.112004] initcall usb_idmouse_init+0x0/0x3a returned 0 after 15625 usecs
[   31.120003] calling  iowarrior_init+0x0/0x16 @ 1
[   31.124004] bus: 'usb': add driver iowarrior
[   31.128067] usbcore: registered new interface driver iowarrior
[   31.136004] initcall iowarrior_init+0x0/0x16 returned 0 after 11718 usecs
[   31.144003] calling  isight_firmware_init+0x0/0x16 @ 1
[   31.148004] bus: 'usb': add driver isight_firmware
[   31.152057] usbcore: registered new interface driver isight_firmware
[   31.160004] initcall isight_firmware_init+0x0/0x16 returned 0 after 11718 usecs
[   31.168003] calling  tv_init+0x0/0x3c @ 1
[   31.172004] bus: 'usb': add driver trancevibrator
[   31.176056] usbcore: registered new interface driver trancevibrator
[   31.180002] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
[   31.188004] initcall tv_init+0x0/0x3c returned 0 after 15625 usecs
[   31.192003] calling  uss720_init+0x0/0x4d @ 1
[   31.200004] bus: 'usb': add driver uss720
[   31.204053] usbcore: registered new interface driver uss720
[   31.208002] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[   31.216001] uss720: NOTE: this is a special purpose driver to allow nonstandard
[   31.224001] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[   31.232001] uss720: If you just want to connect to a printer, use usblp instead
[   31.240004] initcall uss720_init+0x0/0x4d returned 0 after 39062 usecs
[   31.244003] calling  usb_sevseg_init+0x0/0x2f @ 1
[   31.252004] bus: 'usb': add driver usbsevseg
[   31.256056] usbcore: registered new interface driver usbsevseg
[   31.260004] initcall usb_sevseg_init+0x0/0x2f returned 0 after 7812 usecs
[   31.268003] calling  usb_sisusb_init+0x0/0x16 @ 1
[   31.272004] bus: 'usb': add driver sisusb
[   31.276056] usbcore: registered new interface driver sisusb
[   31.280004] initcall usb_sisusb_init+0x0/0x16 returned 0 after 7812 usecs
[   31.288003] calling  i8042_init+0x0/0x31b @ 1
[   31.292004] bus: 'pnp': add driver i8042 kbd
[   31.296054] bus: 'pnp': add driver i8042 aux
[   31.300059] bus: 'pnp': remove driver i8042 kbd
[   31.304050] driver: 'i8042 kbd': driver_release
[   31.312010] bus: 'pnp': remove driver i8042 aux
[   31.316049] driver: 'i8042 aux': driver_release
[   31.320005] PNP: No PS/2 controller found. Probing ports directly.
[   31.324030] Registering platform device 'i8042'. Parent at platform
[   31.332004] device: 'i8042': device_add
[   31.336008] bus: 'platform': add device i8042
[   31.340014] PM: Adding info for platform:i8042
[   31.344066] bus: 'platform': add driver i8042
[   31.348014] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
[   31.356002] bus: 'platform': really_probe: probing driver i8042 with device i8042
[   31.893201] serio: i8042 KBD port at 0x60,0x64 irq 1
[   31.896019] serio: i8042 AUX port at 0x60,0x64 irq 12
[   31.896017] device: 'serio0': device_add
[   31.896023] bus: 'serio': add device serio0
[   31.896040] PM: Adding info for serio:serio0
[   31.916008] driver: 'i8042': driver_bound: bound to device 'i8042'
[   31.916005] device: 'serio1': device_add
[   31.916017] bus: 'serio': add device serio1
[   31.916041] PM: Adding info for serio:serio1
[   31.932003] bus: 'platform': really_probe: bound device i8042 to driver i8042
[   31.940054] initcall i8042_init+0x0/0x31b returned 0 after 632812 usecs
[   31.948003] calling  parkbd_init+0x0/0x184 @ 1
[   31.952002] parkbd: no such parport
[   31.956003] initcall parkbd_init+0x0/0x184 returned -19 after 3906 usecs
[   31.960003] calling  serport_init+0x0/0x2b @ 1
[   31.968003] initcall serport_init+0x0/0x2b returned 0 after 0 usecs
[   31.972003] calling  ct82c710_init+0x0/0x151 @ 1
[   31.976010] initcall ct82c710_init+0x0/0x151 returned -19 after 0 usecs
[   31.984002] calling  pcips2_init+0x0/0x16 @ 1
[   31.988016] bus: 'pci': add driver pcips2
[   31.992076] initcall pcips2_init+0x0/0x16 returned 0 after 3906 usecs
[   32.000003] calling  altera_ps2_init+0x0/0xf @ 1
[   32.004004] bus: 'platform': add driver altera_ps2
[   32.008057] initcall altera_ps2_init+0x0/0xf returned 0 after 3906 usecs
[   32.016003] calling  emu_init+0x0/0x16 @ 1
[   32.020013] bus: 'pci': add driver Emu10k1_gameport
[   32.024064] initcall emu_init+0x0/0x16 returned 0 after 3906 usecs
[   32.032003] calling  fm801_gp_init+0x0/0x16 @ 1
[   32.036012] bus: 'pci': add driver FM801_gameport
[   32.040063] initcall fm801_gp_init+0x0/0x16 returned 0 after 3906 usecs
[   32.044003] calling  l4_init+0x0/0x2c8 @ 1
[   32.052015] initcall l4_init+0x0/0x2c8 returned -19 after 0 usecs
[   32.056003] calling  mousedev_init+0x0/0x78 @ 1
[   32.060007] device: 'mice': device_add
[   32.064192] PM: Adding info for No Bus:mice
[   32.068063] device: 'psaux': device_add
[   32.072077] PM: Adding info for No Bus:psaux
[   32.076051] mice: PS/2 mouse device common for all mice
[   32.084004] initcall mousedev_init+0x0/0x78 returned 0 after 23437 usecs
[   32.088003] calling  joydev_init+0x0/0xf @ 1
[   32.092003] initcall joydev_init+0x0/0xf returned 0 after 0 usecs
[   32.100002] calling  evdev_init+0x0/0xf @ 1
[   32.104003] initcall evdev_init+0x0/0xf returned 0 after 0 usecs
[   32.108002] calling  atkbd_init+0x0/0x20 @ 1
[   32.112009] bus: 'serio': add driver atkbd
[   32.120001] initcall atkbd_init+0x0/0x20 returned 0 after 7812 usecs
[   32.120006] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
[   32.120009] bus: 'serio': really_probe: probing driver atkbd with device serio0
[   32.140006] calling  gpio_keys_init+0x0/0xf @ 1
[   32.144005] bus: 'platform': add driver gpio-keys
[   32.148062] initcall gpio_keys_init+0x0/0xf returned 0 after 3906 usecs
[   32.156003] calling  lm8323_init+0x0/0x11 @ 1
[   32.160004] bus: 'i2c': add driver lm8323
[   32.164056] i2c-core: driver [lm8323] registered
[   32.168004] initcall lm8323_init+0x0/0x11 returned 0 after 7812 usecs
[   32.176003] calling  matrix_keypad_init+0x0/0xf @ 1
[   32.180004] bus: 'platform': add driver matrix-keypad
[   32.184057] initcall matrix_keypad_init+0x0/0xf returned 0 after 3906 usecs
[   32.192003] calling  max7359_init+0x0/0x11 @ 1
[   32.196003] bus: 'i2c': add driver max7359
[   32.200062] i2c-core: driver [max7359] registered
[   32.204004] initcall max7359_init+0x0/0x11 returned 0 after 7812 usecs
[   32.212003] calling  nkbd_init+0x0/0x16 @ 1
[   32.216002] bus: 'serio': add driver newtonkbd
[   32.220059] initcall nkbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.228003] calling  opencores_kbd_init+0x0/0xf @ 1
[   32.232004] bus: 'platform': add driver opencores-kbd
[   32.236056] initcall opencores_kbd_init+0x0/0xf returned 0 after 3906 usecs
[   32.244003] calling  skbd_init+0x0/0x16 @ 1
[   32.248002] bus: 'serio': add driver stowaway
[   32.252058] initcall skbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.260003] calling  sunkbd_init+0x0/0x16 @ 1
[   32.264002] bus: 'serio': add driver sunkbd
[   32.268058] initcall sunkbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.276003] calling  xtkbd_init+0x0/0x16 @ 1
[   32.280002] bus: 'serio': add driver xtkbd
[   32.284067] initcall xtkbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.288003] calling  a3d_init+0x0/0x16 @ 1
[   32.292002] bus: 'gameport': add driver adc
[   32.296060] initcall a3d_init+0x0/0x16 returned 0 after 3906 usecs
[   32.304003] calling  adi_init+0x0/0x16 @ 1
[   32.308002] bus: 'gameport': add driver adi
[   32.312059] initcall adi_init+0x0/0x16 returned 0 after 3906 usecs
[   32.316003] calling  analog_init+0x0/0xcd @ 1
[   32.324002] bus: 'gameport': add driver analog
[   32.328059] initcall analog_init+0x0/0xcd returned 0 after 3906 usecs
[   32.332003] calling  db9_init+0x0/0x3ce @ 1
[   32.336003] initcall db9_init+0x0/0x3ce returned -19 after 0 usecs
[   32.344003] calling  gc_init+0x0/0x652 @ 1
[   32.348003] initcall gc_init+0x0/0x652 returned -19 after 0 usecs
[   32.352003] calling  gf2k_init+0x0/0x16 @ 1
[   32.356002] bus: 'gameport': add driver gf2k
[   32.364059] initcall gf2k_init+0x0/0x16 returned 0 after 7812 usecs
[   32.368003] calling  grip_init+0x0/0x16 @ 1
[   32.372002] bus: 'gameport': add driver grip_mp
[   32.376059] initcall grip_init+0x0/0x16 returned 0 after 3906 usecs
[   32.384003] calling  guillemot_init+0x0/0x16 @ 1
[   32.388002] bus: 'gameport': add driver guillemot
[   32.392059] initcall guillemot_init+0x0/0x16 returned 0 after 3906 usecs
[   32.400004] calling  iforce_init+0x0/0x41 @ 1
[   32.404007] bus: 'usb': add driver iforce
[   32.408063] usbcore: registered new interface driver iforce
[   32.412002] bus: 'serio': add driver iforce
[   32.416067] initcall iforce_init+0x0/0x41 returned 0 after 11718 usecs
[   32.424003] calling  interact_init+0x0/0x16 @ 1
[   32.428002] bus: 'gameport': add driver interact
[   32.432059] initcall interact_init+0x0/0x16 returned 0 after 3906 usecs
[   32.440003] calling  magellan_init+0x0/0x16 @ 1
[   32.444002] bus: 'serio': add driver magellan
[   32.448059] initcall magellan_init+0x0/0x16 returned 0 after 3906 usecs
[   32.456003] calling  sw_init+0x0/0x16 @ 1
[   32.460002] bus: 'gameport': add driver sidewinder
[   32.464058] initcall sw_init+0x0/0x16 returned 0 after 3906 usecs
[   32.472003] calling  spaceball_init+0x0/0x16 @ 1
[   32.476002] bus: 'serio': add driver spaceball
[   32.480058] initcall spaceball_init+0x0/0x16 returned 0 after 3906 usecs
[   32.488003] calling  spaceorb_init+0x0/0x16 @ 1
[   32.492002] bus: 'serio': add driver spaceorb
[   32.496059] initcall spaceorb_init+0x0/0x16 returned 0 after 3906 usecs
[   32.504003] calling  stinger_init+0x0/0x16 @ 1
[   32.508002] bus: 'serio': add driver stinger
[   32.512058] initcall stinger_init+0x0/0x16 returned 0 after 3906 usecs
[   32.516003] calling  tmdc_init+0x0/0x16 @ 1
[   32.520002] bus: 'gameport': add driver tmdc
[   32.524068] initcall tmdc_init+0x0/0x16 returned 0 after 3906 usecs
[   32.532003] calling  tgfx_init+0x0/0x3c7 @ 1
[   32.536003] initcall tgfx_init+0x0/0x3c7 returned -19 after 0 usecs
[   32.544003] calling  twidjoy_init+0x0/0x16 @ 1
[   32.548002] bus: 'serio': add driver twidjoy
[   32.552059] initcall twidjoy_init+0x0/0x16 returned 0 after 3906 usecs
[   32.556003] calling  warrior_init+0x0/0x16 @ 1
[   32.564002] bus: 'serio': add driver warrior
[   32.568058] initcall warrior_init+0x0/0x16 returned 0 after 3906 usecs
[   32.572003] calling  zhenhua_init+0x0/0x16 @ 1
[   32.576002] bus: 'serio': add driver zhenhua
[   32.580059] initcall zhenhua_init+0x0/0x16 returned 0 after 7812 usecs
[   32.588003] calling  usb_acecad_init+0x0/0x2d @ 1
[   32.592006] bus: 'usb': add driver usb_acecad
[   32.596057] usbcore: registered new interface driver usb_acecad
[   32.604002] acecad: v3.2:USB Acecad Flair tablet driver
[   32.608003] initcall usb_acecad_init+0x0/0x2d returned 0 after 15625 usecs
[   32.616003] calling  kbtab_init+0x0/0x2d @ 1
[   32.636008] bus: 'usb': add driver kbtab
[   32.652024] device: 'input0': device_add
[   32.652058] usbcore: registered new interface driver kbtab
[   32.652060] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[   32.652064] initcall kbtab_init+0x0/0x2d returned 0 after 19531 usecs
[   32.652067] calling  pm860x_touch_init+0x0/0xf @ 1
[   32.652072] bus: 'platform': add driver 88pm860x-touch
[   32.652129] initcall pm860x_touch_init+0x0/0xf returned 0 after 0 usecs
[   32.652132] calling  ad7879_init+0x0/0x11 @ 1
[   32.652135] bus: 'i2c': add driver ad7879
[   32.652187] i2c-core: driver [ad7879] registered
[   32.652191] initcall ad7879_init+0x0/0x11 returned 0 after 0 usecs
[   32.652194] calling  dynapro_init+0x0/0x16 @ 1
[   32.652196] bus: 'serio': add driver dynapro
[   32.652271] initcall dynapro_init+0x0/0x16 returned 0 after 0 usecs
[   32.652274] calling  gunze_init+0x0/0x16 @ 1
[   32.652277] bus: 'serio': add driver gunze
[   32.652334] initcall gunze_init+0x0/0x16 returned 0 after 0 usecs
[   32.652337] calling  eeti_ts_init+0x0/0x11 @ 1
[   32.652340] bus: 'i2c': add driver eeti_ts
[   32.652392] i2c-core: driver [eeti_ts] registered
[   32.652395] initcall eeti_ts_init+0x0/0x11 returned 0 after 0 usecs
[   32.652398] calling  inexio_init+0x0/0x16 @ 1
[   32.652401] bus: 'serio': add driver inexio
[   32.652457] initcall inexio_init+0x0/0x16 returned 0 after 0 usecs
[   32.652461] calling  mcs5000_ts_init+0x0/0x11 @ 1
[   32.652463] bus: 'i2c': add driver mcs5000_ts
[   32.652515] i2c-core: driver [mcs5000_ts] registered
[   32.652519] initcall mcs5000_ts_init+0x0/0x11 returned 0 after 0 usecs
[   32.652522] calling  mk712_init+0x0/0x1b4 @ 1
[   32.652528] mk712: device not present
[   32.652532] initcall mk712_init+0x0/0x1b4 returned -19 after 0 usecs
[   32.652535] calling  usbtouch_init+0x0/0x16 @ 1
[   32.652542] bus: 'usb': add driver usbtouchscreen
[   32.652599] usbcore: registered new interface driver usbtouchscreen
[   32.652602] initcall usbtouch_init+0x0/0x16 returned 0 after 0 usecs
[   32.652605] calling  pm_init+0x0/0x16 @ 1
[   32.652608] bus: 'serio': add driver penmountlpc
[   32.652665] initcall pm_init+0x0/0x16 returned 0 after 0 usecs
[   32.652668] calling  tr_init+0x0/0x16 @ 1
[   32.652670] bus: 'serio': add driver touchright
[   32.652738] initcall tr_init+0x0/0x16 returned 0 after 0 usecs
[   32.652741] calling  tw_init+0x0/0x16 @ 1
[   32.652743] bus: 'serio': add driver touchwin
[   32.652810] initcall tw_init+0x0/0x16 returned 0 after 0 usecs
[   32.652813] calling  tsc2007_init+0x0/0x11 @ 1
[   32.652816] bus: 'i2c': add driver tsc2007
[   32.652868] i2c-core: driver [tsc2007] registered
[   32.652872] initcall tsc2007_init+0x0/0x11 returned 0 after 0 usecs
[   32.652875] calling  ad714x_i2c_init+0x0/0x11 @ 1
[   32.652878] bus: 'i2c': add driver ad714x_captouch
[   32.652931] i2c-core: driver [ad714x_captouch] registered
[   32.652934] initcall ad714x_i2c_init+0x0/0x11 returned 0 after 0 usecs
[   32.652937] calling  apanel_init+0x0/0x179 @ 1
[   32.653094] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[   32.653094] initcall apanel_init+0x0/0x179 returned -19 after 0 usecs
[   32.653094] calling  ati_remote_init+0x0/0x3c @ 1
[   32.653094] bus: 'usb': add driver ati_remote
[   32.653094] usbcore: registered new interface driver ati_remote
[   32.653094] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
[   32.653094] initcall ati_remote_init+0x0/0x3c returned 0 after 0 usecs
[   32.653094] calling  ati_remote2_init+0x0/0x3c @ 1
[   32.653094] bus: 'usb': add driver ati_remote2
[   32.653094] usbcore: registered new interface driver ati_remote2
[   32.653094] ati_remote2: ATI/Philips USB RF remote driver 0.3
[   32.653094] initcall ati_remote2_init+0x0/0x3c returned 0 after 0 usecs
[   32.653094] calling  cm109_init+0x0/0xdc @ 1
[   32.653094] cm109: Keymap for Komunikate KIP1000 phone loaded
[   32.653094] bus: 'usb': add driver cm109
[   32.653094] usbcore: registered new interface driver cm109
[   32.653094] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[   32.653094] initcall cm109_init+0x0/0xdc returned 0 after 0 usecs
[   32.653094] calling  usb_keyspan_init+0x0/0x2f @ 1
[   32.653094] bus: 'usb': add driver keyspan_remote
[   32.653094] usbcore: registered new interface driver keyspan_remote
[   32.653094] initcall usb_keyspan_init+0x0/0x2f returned 0 after 0 usecs
[   32.653094] calling  max8925_onkey_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver max8925-onkey
[   32.653094] initcall max8925_onkey_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  wbcir_init+0x0/0x40 @ 1
[   32.653094] bus: 'pnp': add driver Winbond CIR
[   32.653094] initcall wbcir_init+0x0/0x40 returned 0 after 0 usecs
[   32.653094] calling  wm831x_on_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver wm831x-on
[   32.653094] initcall wm831x_on_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  yealink_dev_init+0x0/0x2d @ 1
[   32.653094] bus: 'usb': add driver yealink
[   32.653094] usbcore: registered new interface driver yealink
[   32.653094] yealink: yld-20051230:Yealink phone driver
[   32.653094] initcall yealink_dev_init+0x0/0x2d returned 0 after 0 usecs
[   32.653094] calling  bq4802_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver rtc-bq4802
[   32.653094] initcall bq4802_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1286_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver rtc-ds1286
[   32.653094] initcall ds1286_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1307_init+0x0/0x11 @ 1
[   32.653094] bus: 'i2c': add driver rtc-ds1307
[   32.653094] i2c-core: driver [rtc-ds1307] registered
[   32.653094] initcall ds1307_init+0x0/0x11 returned 0 after 0 usecs
[   32.653094] calling  ds1511_rtc_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver ds1511
[   32.653094] initcall ds1511_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1553_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver rtc-ds1553
[   32.653094] initcall ds1553_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1672_init+0x0/0x11 @ 1
[   32.653094] bus: 'i2c': add driver rtc-ds1672
[   32.653094] i2c-core: driver [rtc-ds1672] registered
[   32.653097] initcall ds1672_init+0x0/0x11 returned 0 after 0 usecs
[   32.653100] calling  fm3130_init+0x0/0x11 @ 1
[   32.653102] bus: 'i2c': add driver rtc-fm3130
[   32.653154] i2c-core: driver [rtc-fm3130] registered
[   32.653158] initcall fm3130_init+0x0/0x11 returned 0 after 0 usecs
[   32.653161] calling  isl1208_init+0x0/0x11 @ 1
[   32.653164] bus: 'i2c': add driver rtc-isl1208
[   32.653225] i2c-core: driver [rtc-isl1208] registered
[   32.653229] initcall isl1208_init+0x0/0x11 returned 0 after 0 usecs
[   32.653232] calling  m48t35_init+0x0/0xf @ 1
[   32.653237] bus: 'platform': add driver rtc-m48t35
[   32.653293] initcall m48t35_init+0x0/0xf returned 0 after 0 usecs
[   32.653296] calling  m48t59_rtc_init+0x0/0xf @ 1
[   32.653300] bus: 'platform': add driver rtc-m48t59
[   32.653366] initcall m48t59_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.653369] calling  m48t86_rtc_init+0x0/0xf @ 1
[   32.653373] bus: 'platform': add driver rtc-m48t86
[   32.653429] initcall m48t86_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.653432] calling  max6900_init+0x0/0x11 @ 1
[   32.653435] bus: 'i2c': add driver rtc-max6900
[   32.653488] i2c-core: driver [rtc-max6900] registered
[   32.653491] initcall max6900_init+0x0/0x11 returned 0 after 0 usecs
[   32.653495] calling  msm6242_rtc_init+0x0/0x14 @ 1
[   32.653499] bus: 'platform': add driver rtc-msm6242
[   32.653555] bus: 'platform': remove driver rtc-msm6242
[   32.653605] driver: 'rtc-msm6242': driver_release
[   32.653612] initcall msm6242_rtc_init+0x0/0x14 returned -19 after 0 usecs
[   32.653615] calling  rp5c01_rtc_init+0x0/0x14 @ 1
[   32.653619] bus: 'platform': add driver rtc-rp5c01
[   32.653673] bus: 'platform': remove driver rtc-rp5c01
[   32.653722] driver: 'rtc-rp5c01': driver_release
[   32.653729] initcall rp5c01_rtc_init+0x0/0x14 returned -19 after 0 usecs
[   32.653732] calling  rs5c372_init+0x0/0x11 @ 1
[   32.653736] bus: 'i2c': add driver rtc-rs5c372
[   32.653788] i2c-core: driver [rtc-rs5c372] registered
[   32.653792] initcall rs5c372_init+0x0/0x11 returned 0 after 0 usecs
[   32.653795] calling  rx8581_init+0x0/0x11 @ 1
[   32.653798] bus: 'i2c': add driver rtc-rx8581
[   32.653850] i2c-core: driver [rtc-rx8581] registered
[   32.653853] initcall rx8581_init+0x0/0x11 returned 0 after 0 usecs
[   32.653856] calling  s35390a_rtc_init+0x0/0x11 @ 1
[   32.653859] bus: 'i2c': add driver rtc-s35390a
[   32.653911] i2c-core: driver [rtc-s35390a] registered
[   32.653915] initcall s35390a_rtc_init+0x0/0x11 returned 0 after 0 usecs
[   32.653918] calling  test_init+0x0/0x93 @ 1
[   32.653923] bus: 'platform': add driver rtc-test
[   32.653984] Registering platform device 'rtc-test.0'. Parent at platform
[   32.653987] device: 'rtc-test.0': device_add
[   32.653994] bus: 'platform': add device rtc-test.0
[   32.654016] PM: Adding info for platform:rtc-test.0
[   32.654077] bus: 'platform': driver_probe_device: matched device rtc-test.0 with driver rtc-test
[   32.654080] bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.0
[   32.654108] device: 'rtc0': device_add
[   32.654270] PM: Adding info for No Bus:rtc0
[   32.654325] rtc-test rtc-test.0: rtc core: registered test as rtc0
[   32.654329] driver: 'rtc-test.0': driver_bound: bound to device 'rtc-test'
[   32.654332] bus: 'platform': really_probe: bound device rtc-test.0 to driver rtc-test
[   32.654337] Registering platform device 'rtc-test.1'. Parent at platform
[   32.654340] device: 'rtc-test.1': device_add
[   32.654346] bus: 'platform': add device rtc-test.1
[   32.654359] PM: Adding info for platform:rtc-test.1
[   32.654416] bus: 'platform': driver_probe_device: matched device rtc-test.1 with driver rtc-test
[   32.654419] bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.1
[   32.654432] device: 'rtc1': device_add
[   32.654535] PM: Adding info for No Bus:rtc1
[   32.654588] rtc-test rtc-test.1: rtc core: registered test as rtc1
[   32.654592] driver: 'rtc-test.1': driver_bound: bound to device 'rtc-test'
[   32.654595] bus: 'platform': really_probe: bound device rtc-test.1 to driver rtc-test
[   32.654601] initcall test_init+0x0/0x93 returned 0 after 0 usecs
[   32.654604] calling  v3020_init+0x0/0xf @ 1
[   32.654610] bus: 'platform': add driver v3020
[   32.654669] initcall v3020_init+0x0/0xf returned 0 after 0 usecs
[   32.654672] calling  wm831x_rtc_init+0x0/0xf @ 1
[   32.654676] bus: 'platform': add driver wm831x-rtc
[   32.654734] initcall wm831x_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.654737] calling  x1205_init+0x0/0x11 @ 1
[   32.654741] bus: 'i2c': add driver rtc-x1205
[   32.654805] i2c-core: driver [rtc-x1205] registered
[   32.654809] initcall x1205_init+0x0/0x11 returned 0 after 0 usecs
[   32.654813] calling  i2c_smbus_init+0x0/0x11 @ 1
[   32.654816] bus: 'i2c': add driver smbus_alert
[   32.654868] i2c-core: driver [smbus_alert] registered
[   32.654872] initcall i2c_smbus_init+0x0/0x11 returned 0 after 0 usecs
[   32.654875] calling  ali1563_init+0x0/0x16 @ 1
[   32.654891] bus: 'pci': add driver ali1563_smbus
[   32.654967] initcall ali1563_init+0x0/0x16 returned 0 after 0 usecs
[   32.654971] calling  i2c_ali15x3_init+0x0/0x16 @ 1
[   32.654983] bus: 'pci': add driver ali15x3_smbus
[   32.655046] initcall i2c_ali15x3_init+0x0/0x16 returned 0 after 0 usecs
[   32.655049] calling  amd756_init+0x0/0x16 @ 1
[   32.655062] bus: 'pci': add driver amd756_smbus
[   32.655125] initcall amd756_init+0x0/0x16 returned 0 after 0 usecs
[   32.655128] calling  i2c_amd8111_init+0x0/0x16 @ 1
[   32.655141] bus: 'pci': add driver amd8111_smbus2
[   32.655213] initcall i2c_amd8111_init+0x0/0x16 returned 0 after 0 usecs
[   32.655216] calling  i2c_i801_init+0x0/0x9e @ 1
[   32.655549] bus: 'pci': add driver i801_smbus
[   32.655615] initcall i2c_i801_init+0x0/0x9e returned 0 after 0 usecs
[   32.655618] calling  i2c_sch_init+0x0/0xf @ 1
[   32.655623] bus: 'platform': add driver isch_smbus
[   32.655680] initcall i2c_sch_init+0x0/0xf returned 0 after 0 usecs
[   32.655684] calling  nforce2_init+0x0/0x16 @ 1
[   32.655697] bus: 'pci': add driver nForce2_smbus
[   32.655708] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver nForce2_smbus
[   32.655711] bus: 'pci': really_probe: probing driver nForce2_smbus with device 0000:00:01.1
[   32.655754] device: 'i2c-0': device_add
[   32.655764] bus: 'i2c': add device i2c-0
[   32.655775] PM: Adding info for i2c:i2c-0
[   32.655830] i2c i2c-0: adapter [SMBus nForce2 adapter at 4c00] registered
[   32.655838] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[   32.655845] device: 'i2c-1': device_add
[   32.655855] bus: 'i2c': add device i2c-1
[   32.655865] PM: Adding info for i2c:i2c-1
[   32.655915] i2c i2c-1: adapter [SMBus nForce2 adapter at 4c40] registered
[   32.655920] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[   32.655923] driver: '0000:00:01.1': driver_bound: bound to device 'nForce2_smbus'
[   32.655927] bus: 'pci': really_probe: bound device 0000:00:01.1 to driver nForce2_smbus
[   32.655985] initcall nforce2_init+0x0/0x16 returned 0 after 0 usecs
[   32.655988] calling  i2c_vt586b_init+0x0/0x16 @ 1
[   32.655998] bus: 'pci': add driver vt586b_smbus
[   32.655998] initcall i2c_vt586b_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  i2c_vt596_init+0x0/0x16 @ 1
[   32.655998] bus: 'pci': add driver vt596_smbus
[   32.655998] initcall i2c_vt596_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  ocores_i2c_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver ocores-i2c
[   32.655998] initcall ocores_i2c_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  i2c_pca_pf_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver i2c-pca-platform
[   32.655998] initcall i2c_pca_pf_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  i2c_adap_simtec_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver simtec-i2c
[   32.655998] initcall i2c_adap_simtec_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  xiic_i2c_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver xiic-i2c
[   32.655998] initcall xiic_i2c_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  i2c_parport_init+0x0/0x43 @ 1
[   32.655998] i2c-parport: adapter type unspecified
[   32.655998] initcall i2c_parport_init+0x0/0x43 returned -19 after 0 usecs
[   32.655998] calling  taos_init+0x0/0x16 @ 1
[   32.655998] bus: 'serio': add driver taos-evm
[   32.655998] initcall taos_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  usb_i2c_tiny_usb_init+0x0/0x16 @ 1
[   32.655998] bus: 'usb': add driver i2c-tiny-usb
[   32.655998] usbcore: registered new interface driver i2c-tiny-usb
[   32.655998] initcall usb_i2c_tiny_usb_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  scx200_acb_init+0x0/0x1e3 @ 1
[   32.655998] scx200_acb: NatSemi SCx200 ACCESS.bus Driver
[   32.655998] initcall scx200_acb_init+0x0/0x1e3 returned -19 after 0 usecs
[   32.655998] calling  scx200_i2c_init+0x0/0xb9 @ 1
[   32.655998] scx200_i2c: NatSemi SCx200 I2C Driver
[   32.655998] scx200_i2c: no SCx200 gpio pins available
[   32.655998] initcall scx200_i2c_init+0x0/0xb9 returned -19 after 0 usecs
[   32.655998] calling  pps_ktimer_init+0x0/0x7e @ 1
[   32.655998] device: 'pps0': device_add
[   32.655998] PM: Adding info for No Bus:pps0
[   32.655998] new PPS source ktimer at ID 0
[   32.655998] ktimer PPS source registered at 0
[   32.655998] initcall pps_ktimer_init+0x0/0x7e returned 0 after 0 usecs
[   32.655998] calling  pda_power_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver pda-power
[   32.655998] initcall pda_power_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  max8925_power_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver max8925-power
[   32.655998] initcall max8925_power_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  wm831x_backup_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver wm831x-backup
[   32.655998] initcall wm831x_backup_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  test_power_init+0x0/0x5b @ 1
[   32.655998] device: 'test_ac': device_add
[   32.655998] PM: Adding info for No Bus:test_ac
[   32.655998] device: 'test_battery': device_add
[   32.655998] PM: Adding info for No Bus:test_battery
[   32.655998] test_power_get_battery_property: some properties deliberately report errors.
[   32.655998] power_supply test_battery: driver failed to report `charge_full' property
[   32.655998] device: 'test_battery': dev_uevent: class uevent() returned -22
[   32.655998] initcall test_power_init+0x0/0x5b returned 0 after 0 usecs
[   32.655998] calling  ds278x_init+0x0/0x11 @ 1
[   32.655998] bus: 'i2c': add driver ds2782-battery
[   32.655998] test_power_get_battery_property: some properties deliberately report errors.
[   32.655998] power_supply test_battery: driver failed to report `charge_full' property
[   32.655998] device: 'test_battery': dev_uevent: class uevent() returned -22
[   32.655998] i2c-core: driver [ds2782-battery] registered
[   32.655998] initcall ds278x_init+0x0/0x11 returned 0 after 0 usecs
[   32.655998] calling  max17040_init+0x0/0x11 @ 1
[   32.655998] bus: 'i2c': add driver max17040
[   32.655998] i2c-core: driver [max17040] registered
[   32.655998] initcall max17040_init+0x0/0x11 returned 0 after 0 usecs
[   32.655998] calling  sensors_w83792d_init+0x0/0x11 @ 1
[   32.655998] bus: 'i2c': add driver w83792d
[   32.655998] i2c-core: driver [w83792d] registered
[   32.655998] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   32.656047] PM: Adding info for No Bus:input0
[   32.660097] input: AT Translated Set 2 keyboard as /class/input/input0
[   32.660007] i2c i2c-0: Transaction failed (0x10)!
[   32.660011] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   32.664020] device: 'event0': device_add
[   32.668191] PM: Adding info for No Bus:event0
[   32.668005] i2c i2c-0: Transaction failed (0x10)!
[   32.668007] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   32.672062] driver: 'serio0': driver_bound: bound to device 'atkbd'
[   32.676004] bus: 'serio': really_probe: bound device serio0 to driver atkbd
[   32.676005] i2c i2c-0: Transaction failed (0x10)!
[   32.676007] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   32.680004] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd
[   32.684002] bus: 'serio': really_probe: probing driver atkbd with device serio1
[   32.684005] i2c i2c-0: Transaction failed (0x10)!
[   32.684013] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   32.692019] i2c i2c-1: Transaction failed (0x10)!
[   32.696003] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   32.708004] i2c i2c-1: Transaction failed (0x10)!
[   32.712002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   32.724003] i2c i2c-1: Transaction failed (0x10)!
[   32.728002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   32.740003] i2c i2c-1: Transaction failed (0x10)!
[   32.744007] initcall sensors_w83792d_init+0x0/0x11 returned 0 after 89843 usecs
[   32.752003] calling  sensors_w83781d_init+0x0/0x367 @ 1
[   32.756026] w83781d: Detection failed at step 3
[   32.760015] bus: 'i2c': add driver w83781d
[   32.764058] i2c-core: driver [w83781d] registered
[   32.768006] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[   32.784004] i2c i2c-0: Transaction failed (0x10)!
[   32.788002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   32.800003] i2c i2c-0: Transaction failed (0x10)!
[   32.804005] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   32.816004] i2c i2c-0: Transaction failed (0x10)!
[   32.820002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   32.832004] i2c i2c-0: Transaction failed (0x10)!
[   32.836002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   32.848003] i2c i2c-0: Transaction failed (0x10)!
[   32.852002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   32.864003] i2c i2c-0: Transaction failed (0x10)!
[   32.868002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   32.880004] i2c i2c-0: Transaction failed (0x10)!
[   32.884002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   32.896004] i2c i2c-0: Transaction failed (0x10)!
[   32.900007] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[   32.912004] i2c i2c-1: Transaction failed (0x10)!
[   32.916002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   32.928004] i2c i2c-1: Transaction failed (0x10)!
[   32.932002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   32.944004] i2c i2c-1: Transaction failed (0x10)!
[   32.948003] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   32.960004] i2c i2c-1: Transaction failed (0x10)!
[   32.964002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   32.976004] i2c i2c-1: Transaction failed (0x10)!
[   32.980002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   32.992004] i2c i2c-1: Transaction failed (0x10)!
[   32.996002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.008004] i2c i2c-1: Transaction failed (0x10)!
[   33.012002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   33.024004] i2c i2c-1: Transaction failed (0x10)!
[   33.028007] initcall sensors_w83781d_init+0x0/0x367 returned 0 after 265625 usecs
[   33.036003] calling  sensors_w83791d_init+0x0/0x11 @ 1
[   33.040003] bus: 'i2c': add driver w83791d
[   33.044055] i2c-core: driver [w83791d] registered
[   33.048005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.064004] i2c i2c-0: Transaction failed (0x10)!
[   33.068002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.080004] i2c i2c-0: Transaction failed (0x10)!
[   33.084002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.096004] i2c i2c-0: Transaction failed (0x10)!
[   33.100002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   33.112004] i2c i2c-0: Transaction failed (0x10)!
[   33.116007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   33.128004] i2c i2c-1: Transaction failed (0x10)!
[   33.132002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   33.144004] i2c i2c-1: Transaction failed (0x10)!
[   33.148002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.160004] i2c i2c-1: Transaction failed (0x10)!
[   33.164002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   33.176004] i2c i2c-1: Transaction failed (0x10)!
[   33.180006] initcall sensors_w83791d_init+0x0/0x11 returned 0 after 136718 usecs
[   33.188003] calling  abituguru3_init+0x0/0x1f3 @ 1
[   33.192007] initcall abituguru3_init+0x0/0x1f3 returned -19 after 0 usecs
[   33.200004] calling  ad7414_init+0x0/0x11 @ 1
[   33.204005] bus: 'i2c': add driver ad7414
[   33.208056] i2c-core: driver [ad7414] registered
[   33.212004] initcall ad7414_init+0x0/0x11 returned 0 after 7812 usecs
[   33.220003] calling  sensors_adm1021_init+0x0/0x11 @ 1
[   33.224003] bus: 'i2c': add driver adm1021
[   33.228054] i2c-core: driver [adm1021] registered
[   33.232005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   33.248004] i2c i2c-0: Transaction failed (0x10)!
[   33.252002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   33.264004] i2c i2c-0: Transaction failed (0x10)!
[   33.268002] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   33.280004] i2c i2c-0: Transaction failed (0x10)!
[   33.284002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   33.296004] i2c i2c-0: Transaction failed (0x10)!
[   33.300002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   33.312004] i2c i2c-0: Transaction failed (0x10)!
[   33.316002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   33.328004] i2c i2c-0: Transaction failed (0x10)!
[   33.332002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   33.344004] i2c i2c-0: Transaction failed (0x10)!
[   33.348002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   33.360004] i2c i2c-0: Transaction failed (0x10)!
[   33.364002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   33.376004] i2c i2c-0: Transaction failed (0x10)!
[   33.380007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   33.392005] i2c i2c-1: Transaction failed (0x10)!
[   33.396003] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   33.412004] i2c i2c-1: Transaction failed (0x10)!
[   33.416002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   33.428004] i2c i2c-1: Transaction failed (0x10)!
[   33.432002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   33.444004] i2c i2c-1: Transaction failed (0x10)!
[   33.448002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   33.460004] i2c i2c-1: Transaction failed (0x10)!
[   33.464002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   33.476004] i2c i2c-1: Transaction failed (0x10)!
[   33.480002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   33.492004] i2c i2c-1: Transaction failed (0x10)!
[   33.496002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   33.508004] i2c i2c-1: Transaction failed (0x10)!
[   33.512002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   33.524004] i2c i2c-1: Transaction failed (0x10)!
[   33.528007] initcall sensors_adm1021_init+0x0/0x11 returned 0 after 296875 usecs
[   33.536003] calling  sensors_adm1025_init+0x0/0x11 @ 1
[   33.540004] bus: 'i2c': add driver adm1025
[   33.544057] i2c-core: driver [adm1025] registered
[   33.548005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.564004] i2c i2c-0: Transaction failed (0x10)!
[   33.568002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.580004] i2c i2c-0: Transaction failed (0x10)!
[   33.584002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.596004] i2c i2c-0: Transaction failed (0x10)!
[   33.600007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   33.612004] i2c i2c-1: Transaction failed (0x10)!
[   33.616002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   33.628004] i2c i2c-1: Transaction failed (0x10)!
[   33.632002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.644004] i2c i2c-1: Transaction failed (0x10)!
[   33.648006] initcall sensors_adm1025_init+0x0/0x11 returned 0 after 105468 usecs
[   33.656002] PPS event at 4294900710
[   33.659494] calling  sensors_adm1029_init+0x0/0x11 @ 1
[   33.664004] bus: 'i2c': add driver adm1029
[   33.668055] i2c-core: driver [adm1029] registered
[   33.672005] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[   33.684004] i2c i2c-0: Transaction failed (0x10)!
[   33.688002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   33.700004] i2c i2c-0: Transaction failed (0x10)!
[   33.704002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   33.716004] i2c i2c-0: Transaction failed (0x10)!
[   33.720002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   33.732004] i2c i2c-0: Transaction failed (0x10)!
[   33.736002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.748004] i2c i2c-0: Transaction failed (0x10)!
[   33.752002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.764004] i2c i2c-0: Transaction failed (0x10)!
[   33.768002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.780004] i2c i2c-0: Transaction failed (0x10)!
[   33.784002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   33.796004] i2c i2c-0: Transaction failed (0x10)!
[   33.800007] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[   33.812004] i2c i2c-1: Transaction failed (0x10)!
[   33.816002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   33.828004] i2c i2c-1: Transaction failed (0x10)!
[   33.832002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   33.844004] i2c i2c-1: Transaction failed (0x10)!
[   33.848002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   33.860004] i2c i2c-1: Transaction failed (0x10)!
[   33.864002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   33.876004] i2c i2c-1: Transaction failed (0x10)!
[   33.880002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   33.892004] i2c i2c-1: Transaction failed (0x10)!
[   33.896002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.908004] i2c i2c-1: Transaction failed (0x10)!
[   33.912002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   33.924004] i2c i2c-1: Transaction failed (0x10)!
[   33.928006] initcall sensors_adm1029_init+0x0/0x11 returned 0 after 257812 usecs
[   33.936003] calling  sensors_adm9240_init+0x0/0x11 @ 1
[   33.940004] bus: 'i2c': add driver adm9240
[   33.944065] i2c-core: driver [adm9240] registered
[   33.948006] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.964004] i2c i2c-0: Transaction failed (0x10)!
[   33.968002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.980004] i2c i2c-0: Transaction failed (0x10)!
[   33.984002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.996004] i2c i2c-0: Transaction failed (0x10)!
[   34.000002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   34.012004] i2c i2c-0: Transaction failed (0x10)!
[   34.016007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.028004] i2c i2c-1: Transaction failed (0x10)!
[   34.032002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   34.044004] i2c i2c-1: Transaction failed (0x10)!
[   34.048002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.060004] i2c i2c-1: Transaction failed (0x10)!
[   34.064002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   34.076004] i2c i2c-1: Transaction failed (0x10)!
[   34.080006] initcall sensors_adm9240_init+0x0/0x11 returned 0 after 136718 usecs
[   34.088003] calling  sensors_ads7828_init+0x0/0x4a @ 1
[   34.092004] bus: 'i2c': add driver ads7828
[   34.096055] i2c-core: driver [ads7828] registered
[   34.100005] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   34.116004] i2c i2c-0: Transaction failed (0x10)!
[   34.120002] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   34.132004] i2c i2c-0: Transaction failed (0x10)!
[   34.136002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   34.148004] i2c i2c-0: Transaction failed (0x10)!
[   34.152002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   34.164004] i2c i2c-0: Transaction failed (0x10)!
[   34.168007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   34.180004] i2c i2c-1: Transaction failed (0x10)!
[   34.184002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   34.196004] i2c i2c-1: Transaction failed (0x10)!
[   34.200002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   34.212004] i2c i2c-1: Transaction failed (0x10)!
[   34.216002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   34.228004] i2c i2c-1: Transaction failed (0x10)!
[   34.232006] initcall sensors_ads7828_init+0x0/0x4a returned 0 after 136718 usecs
[   34.240003] calling  adt7462_init+0x0/0x11 @ 1
[   34.244003] bus: 'i2c': add driver adt7462
[   34.248055] i2c-core: driver [adt7462] registered
[   34.252005] i2c i2c-0: found normal entry for adapter 0, addr 0x58
[   34.264004] i2c i2c-0: Transaction failed (0x10)!
[   34.268002] i2c i2c-0: found normal entry for adapter 0, addr 0x5c
[   34.280004] i2c i2c-0: Transaction failed (0x10)!
[   34.284007] i2c i2c-1: found normal entry for adapter 1, addr 0x58
[   34.296004] i2c i2c-1: Transaction failed (0x10)!
[   34.300002] i2c i2c-1: found normal entry for adapter 1, addr 0x5c
[   34.312004] i2c i2c-1: Transaction failed (0x10)!
[   34.316006] initcall adt7462_init+0x0/0x11 returned 0 after 70312 usecs
[   34.320003] calling  adt7470_init+0x0/0x11 @ 1
[   34.324004] bus: 'i2c': add driver adt7470
[   34.328055] i2c-core: driver [adt7470] registered
[   34.336005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   34.348004] i2c i2c-0: Transaction failed (0x10)!
[   34.352002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   34.364004] i2c i2c-0: Transaction failed (0x10)!
[   34.368002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   34.380004] i2c i2c-0: Transaction failed (0x10)!
[   34.384007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.396004] i2c i2c-1: Transaction failed (0x10)!
[   34.400002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.412004] i2c i2c-1: Transaction failed (0x10)!
[   34.416002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   34.428004] i2c i2c-1: Transaction failed (0x10)!
[   34.432006] initcall adt7470_init+0x0/0x11 returned 0 after 105468 usecs
[   34.436003] calling  sensors_adt7475_init+0x0/0x11 @ 1
[   34.444004] bus: 'i2c': add driver adt7475
[   34.448055] i2c-core: driver [adt7475] registered
[   34.452005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   34.464004] i2c i2c-0: Transaction failed (0x10)!
[   34.468002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   34.480004] i2c i2c-0: Transaction failed (0x10)!
[   34.484003] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   34.496004] i2c i2c-0: Transaction failed (0x10)!
[   34.500007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.512004] i2c i2c-1: Transaction failed (0x10)!
[   34.516002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   34.528004] i2c i2c-1: Transaction failed (0x10)!
[   34.532002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.544004] i2c i2c-1: Transaction failed (0x10)!
[   34.548006] initcall sensors_adt7475_init+0x0/0x11 returned 0 after 101562 usecs
[   34.556003] calling  applesmc_init+0x0/0x47a @ 1
[   34.560011] applesmc: supported laptop not found!
[   34.564002] applesmc: driver init failed (ret=-19)!
[   34.568003] initcall applesmc_init+0x0/0x47a returned -19 after 7812 usecs
[   34.576003] calling  atxp1_init+0x0/0x11 @ 1
[   34.580004] bus: 'i2c': add driver atxp1
[   34.584055] i2c-core: driver [atxp1] registered
[   34.588005] i2c i2c-0: found normal entry for adapter 0, addr 0x37
[   34.604004] i2c i2c-0: Transaction failed (0x10)!
[   34.608002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   34.620004] i2c i2c-0: Transaction failed (0x10)!
[   34.624007] i2c i2c-1: found normal entry for adapter 1, addr 0x37
[   34.636004] i2c i2c-1: Transaction failed (0x10)!
[   34.640002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   34.652004] i2c i2c-1: Transaction failed (0x10)!
[   34.656001] PPS event at 4294900960
[   34.660007] initcall atxp1_init+0x0/0x11 returned 0 after 78125 usecs
[   34.664004] calling  dme1737_init+0x0/0x139 @ 1
[   34.668003] bus: 'i2c': add driver dme1737
[   34.672056] i2c-core: driver [dme1737] registered
[   34.680005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   34.692004] i2c i2c-0: Transaction failed (0x10)!
[   34.696002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   34.708004] i2c i2c-0: Transaction failed (0x10)!
[   34.712002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   34.724004] i2c i2c-0: Transaction failed (0x10)!
[   34.728007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.740004] i2c i2c-1: Transaction failed (0x10)!
[   34.744002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   34.756004] i2c i2c-1: Transaction failed (0x10)!
[   34.760002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.772004] i2c i2c-1: Transaction failed (0x10)!
[   34.776020] initcall dme1737_init+0x0/0x139 returned 0 after 105468 usecs
[   34.780003] calling  sensor_emc1403_init+0x0/0x11 @ 1
[   34.788004] bus: 'i2c': add driver emc1403
[   34.792055] i2c-core: driver [emc1403] registered
[   34.796005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   34.808004] i2c i2c-0: Transaction failed (0x10)!
[   34.812002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   34.824004] i2c i2c-0: Transaction failed (0x10)!
[   34.828002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   34.840004] i2c i2c-0: Transaction failed (0x10)!
[   34.844002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   34.856004] i2c i2c-0: Transaction failed (0x10)!
[   34.860007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   34.872004] i2c i2c-1: Transaction failed (0x10)!
[   34.876002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   34.888004] i2c i2c-1: Transaction failed (0x10)!
[   34.892002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   34.904004] i2c i2c-1: Transaction failed (0x10)!
[   34.908002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   34.920004] i2c i2c-1: Transaction failed (0x10)!
[   34.924006] initcall sensor_emc1403_init+0x0/0x11 returned 0 after 132812 usecs
[   34.932003] calling  f71805f_init+0x0/0x111 @ 1
[   34.936027] initcall f71805f_init+0x0/0x111 returned -19 after 0 usecs
[   34.940003] calling  f71882fg_init+0x0/0x102 @ 1
[   34.944012] f71882fg: Not a Fintek device
[   34.948016] f71882fg: Not a Fintek device
[   34.952008] initcall f71882fg_init+0x0/0x102 returned -19 after 7812 usecs
[   34.960003] calling  sensors_f75375_init+0x0/0x11 @ 1
[   34.964004] bus: 'i2c': add driver f75375
[   34.968055] i2c-core: driver [f75375] registered
[   34.976005] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   34.988004] i2c i2c-0: Transaction failed (0x10)!
[   34.992002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   35.004004] i2c i2c-0: Transaction failed (0x10)!
[   35.008007] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   35.020004] i2c i2c-1: Transaction failed (0x10)!
[   35.024002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   35.036004] i2c i2c-1: Transaction failed (0x10)!
[   35.040006] initcall sensors_f75375_init+0x0/0x11 returned 0 after 74218 usecs
[   35.048003] calling  fschmd_init+0x0/0x11 @ 1
[   35.052004] bus: 'i2c': add driver fschmd
[   35.056065] i2c-core: driver [fschmd] registered
[   35.060006] i2c i2c-0: found normal entry for adapter 0, addr 0x73
[   35.072004] i2c i2c-0: Transaction failed (0x10)!
[   35.076007] i2c i2c-1: found normal entry for adapter 1, addr 0x73
[   35.088004] i2c i2c-1: Transaction failed (0x10)!
[   35.092006] initcall fschmd_init+0x0/0x11 returned 0 after 39062 usecs
[   35.096003] calling  g760a_init+0x0/0x11 @ 1
[   35.100004] bus: 'i2c': add driver g760a
[   35.104065] i2c-core: driver [g760a] registered
[   35.112005] initcall g760a_init+0x0/0x11 returned 0 after 11718 usecs
[   35.116003] calling  sensors_gl518sm_init+0x0/0x11 @ 1
[   35.120004] bus: 'i2c': add driver gl518sm
[   35.124055] i2c-core: driver [gl518sm] registered
[   35.132006] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   35.144004] i2c i2c-0: Transaction failed (0x10)!
[   35.148002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   35.160004] i2c i2c-0: Transaction failed (0x10)!
[   35.164007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   35.176004] i2c i2c-1: Transaction failed (0x10)!
[   35.180002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   35.192004] i2c i2c-1: Transaction failed (0x10)!
[   35.196006] initcall sensors_gl518sm_init+0x0/0x11 returned 0 after 74218 usecs
[   35.204003] calling  i5k_amb_init+0x0/0x52 @ 1
[   35.208006] bus: 'platform': add driver i5k_amb
[   35.212063] Registering platform device 'i5k_amb.0'. Parent at platform
[   35.216003] device: 'i5k_amb.0': device_add
[   35.220007] bus: 'platform': add device i5k_amb.0
[   35.228014] PM: Adding info for platform:i5k_amb.0
[   35.232066] bus: 'platform': driver_probe_device: matched device i5k_amb.0 with driver i5k_amb
[   35.240002] bus: 'platform': really_probe: probing driver i5k_amb with device i5k_amb.0
[   35.248032] initcall i5k_amb_init+0x0/0x52 returned 0 after 39062 usecs
[   35.256004] calling  sm_it87_init+0x0/0x34a @ 1
[   35.260031] it87: Found IT8712F chip at 0x290, revision 7
[   35.264008] it87: VID is disabled (pins used for GPIO)
[   35.268007] it87: in3 is VCC (+5V)
[   35.272001] it87: in7 is VCCH (+5V Stand-By)
[   35.276011] bus: 'platform': add driver it87
[   35.280079] Registering platform device 'it87.656'. Parent at platform
[   35.288003] device: 'it87.656': device_add
[   35.292006] bus: 'platform': add device it87.656
[   35.296012] PM: Adding info for platform:it87.656
[   35.300056] bus: 'platform': driver_probe_device: matched device it87.656 with driver it87
[   35.312002] bus: 'platform': really_probe: probing driver it87 with device it87.656
[   35.316017] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
[   35.324222] device: 'hwmon0': device_add
[   35.328017] PM: Adding info for No Bus:hwmon0
[   35.332053] driver: 'it87.656': driver_bound: bound to device 'it87'
[   35.340002] bus: 'platform': really_probe: bound device it87.656 to driver it87
[   35.348005] initcall sm_it87_init+0x0/0x34a returned 0 after 85937 usecs
[   35.356004] calling  k8temp_init+0x0/0x16 @ 1
[   35.360016] bus: 'pci': add driver k8temp
[   35.364024] bus: 'pci': driver_probe_device: matched device 0000:00:18.3 with driver k8temp
[   35.372002] bus: 'pci': really_probe: probing driver k8temp with device 0000:00:18.3
[   35.380058] device: 'hwmon1': device_add
[   35.384029] PM: Adding info for No Bus:hwmon1
[   35.388053] driver: '0000:00:18.3': driver_bound: bound to device 'k8temp'
[   35.396003] bus: 'pci': really_probe: bound device 0000:00:18.3 to driver k8temp
[   35.400056] initcall k8temp_init+0x0/0x16 returned 0 after 39062 usecs
[   35.408003] calling  k10temp_init+0x0/0x16 @ 1
[   35.412014] bus: 'pci': add driver k10temp
[   35.416066] initcall k10temp_init+0x0/0x16 returned 0 after 3906 usecs
[   35.424003] calling  lis3lv02d_init+0x0/0x11 @ 1
[   35.428004] bus: 'i2c': add driver lis3lv02d_i2c
[   35.432065] i2c-core: driver [lis3lv02d_i2c] registered
[   35.436005] initcall lis3lv02d_init+0x0/0x11 returned 0 after 7812 usecs
[   35.444003] calling  sensors_lm73_init+0x0/0x11 @ 1
[   35.448004] bus: 'i2c': add driver lm73
[   35.452055] i2c-core: driver [lm73] registered
[   35.456005] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   35.472004] i2c i2c-0: Transaction failed (0x10)!
[   35.476002] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   35.488004] i2c i2c-0: Transaction failed (0x10)!
[   35.492002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   35.504003] i2c i2c-0: Transaction failed (0x10)!
[   35.508002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   35.520004] i2c i2c-0: Transaction failed (0x10)!
[   35.524002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   35.536003] i2c i2c-0: Transaction failed (0x10)!
[   35.540002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   35.552003] i2c i2c-0: Transaction failed (0x10)!
[   35.556007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   35.568004] i2c i2c-1: Transaction failed (0x10)!
[   35.572002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   35.584003] i2c i2c-1: Transaction failed (0x10)!
[   35.588002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   35.600003] i2c i2c-1: Transaction failed (0x10)!
[   35.604002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   35.608004] CPA self-test:
[   35.616004] i2c i2c-1: Transaction failed (0x10)!
[   35.616996]  4k 262128 large 0 gb 0 x 262128[40000000-7ffef000] miss 0
[   35.624004] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   35.640005] i2c i2c-1: Transaction failed (0x10)!
[   35.640571]  4k 262128 large 0 gb 0 x 262128[40000000-7ffef000] miss 0
[   35.648003] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   35.660002] PPS event at 4294901211
[   35.664006] i2c i2c-1: Transaction failed (0x10)!
[   35.668009] initcall sensors_lm73_init+0x0/0x11 returned 0 after 214843 usecs
[   35.672004] calling  sensors_lm75_init+0x0/0x11 @ 1
[   35.680005] bus: 'i2c': add driver lm75
[   35.684067] i2c-core: driver [lm75] registered
[   35.688006] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   35.698803]  4k 262128 large 0 gb 0 x 262128[40000000-7ffef000] miss 0
[   35.700002] ok.
[   35.704006] i2c i2c-0: Transaction failed (0x10)!
[   35.708003] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   35.720003] i2c i2c-0: Transaction failed (0x10)!
[   35.724002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   35.736003] i2c i2c-0: Transaction failed (0x10)!
[   35.740002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   35.752003] i2c i2c-0: Transaction failed (0x10)!
[   35.756002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   35.768004] i2c i2c-0: Transaction failed (0x10)!
[   35.772002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   35.784003] i2c i2c-0: Transaction failed (0x10)!
[   35.788002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   35.800003] i2c i2c-0: Transaction failed (0x10)!
[   35.804004] i2c i2c-0: found normal entry for adapter 0, addr 0x4f
[   35.816004] i2c i2c-0: Transaction failed (0x10)!
[   35.820007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   35.832004] i2c i2c-1: Transaction failed (0x10)!
[   35.836002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   35.848003] i2c i2c-1: Transaction failed (0x10)!
[   35.852002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   35.864003] i2c i2c-1: Transaction failed (0x10)!
[   35.868002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   35.880003] i2c i2c-1: Transaction failed (0x10)!
[   35.884002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   35.896003] i2c i2c-1: Transaction failed (0x10)!
[   35.900002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   35.912003] i2c i2c-1: Transaction failed (0x10)!
[   35.916002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   35.928003] i2c i2c-1: Transaction failed (0x10)!
[   35.932002] i2c i2c-1: found normal entry for adapter 1, addr 0x4f
[   35.944003] i2c i2c-1: Transaction failed (0x10)!
[   35.948006] initcall sensors_lm75_init+0x0/0x11 returned 0 after 261718 usecs
[   35.952003] calling  sm_lm78_init+0x0/0x320 @ 1
[   35.960009] lm78: Failed to request port 0x295
[   35.964017] bus: 'i2c': add driver lm78
[   35.968056] i2c-core: driver [lm78] registered
[   35.972005] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[   35.984004] i2c i2c-0: Transaction failed (0x10)!
[   35.988002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   36.000003] i2c i2c-0: Transaction failed (0x10)!
[   36.004002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.016003] i2c i2c-0: Transaction failed (0x10)!
[   36.020002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.032004] i2c i2c-0: Transaction failed (0x10)!
[   36.036002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   36.048003] i2c i2c-0: Transaction failed (0x10)!
[   36.052002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   36.064003] i2c i2c-0: Transaction failed (0x10)!
[   36.068002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   36.080003] i2c i2c-0: Transaction failed (0x10)!
[   36.084002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   36.096003] i2c i2c-0: Transaction failed (0x10)!
[   36.100007] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[   36.112004] i2c i2c-1: Transaction failed (0x10)!
[   36.116002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   36.128003] i2c i2c-1: Transaction failed (0x10)!
[   36.132002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   36.144003] i2c i2c-1: Transaction failed (0x10)!
[   36.148002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   36.160003] i2c i2c-1: Transaction failed (0x10)!
[   36.164002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   36.176003] i2c i2c-1: Transaction failed (0x10)!
[   36.180002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   36.192003] i2c i2c-1: Transaction failed (0x10)!
[   36.196002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   36.208003] i2c i2c-1: Transaction failed (0x10)!
[   36.212002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   36.224003] i2c i2c-1: Transaction failed (0x10)!
[   36.228006] initcall sm_lm78_init+0x0/0x320 returned 0 after 261718 usecs
[   36.232003] calling  sensors_lm83_init+0x0/0x11 @ 1
[   36.240004] bus: 'i2c': add driver lm83
[   36.244055] i2c-core: driver [lm83] registered
[   36.248005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   36.260004] i2c i2c-0: Transaction failed (0x10)!
[   36.264002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   36.276003] i2c i2c-0: Transaction failed (0x10)!
[   36.280003] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   36.292004] i2c i2c-0: Transaction failed (0x10)!
[   36.296002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   36.308004] i2c i2c-0: Transaction failed (0x10)!
[   36.312002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.324004] i2c i2c-0: Transaction failed (0x10)!
[   36.328002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.340004] i2c i2c-0: Transaction failed (0x10)!
[   36.344002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   36.356004] i2c i2c-0: Transaction failed (0x10)!
[   36.360002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   36.372004] i2c i2c-0: Transaction failed (0x10)!
[   36.376002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   36.388004] i2c i2c-0: Transaction failed (0x10)!
[   36.392007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   36.404004] i2c i2c-1: Transaction failed (0x10)!
[   36.408002] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   36.420004] i2c i2c-1: Transaction failed (0x10)!
[   36.424002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   36.436004] i2c i2c-1: Transaction failed (0x10)!
[   36.440002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   36.452004] i2c i2c-1: Transaction failed (0x10)!
[   36.456002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   36.468004] i2c i2c-1: Transaction failed (0x10)!
[   36.472002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   36.484004] i2c i2c-1: Transaction failed (0x10)!
[   36.488002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   36.500004] i2c i2c-1: Transaction failed (0x10)!
[   36.504002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   36.516004] i2c i2c-1: Transaction failed (0x10)!
[   36.520002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   36.532004] i2c i2c-1: Transaction failed (0x10)!
[   36.536007] initcall sensors_lm83_init+0x0/0x11 returned 0 after 289062 usecs
[   36.540003] calling  sensors_lm87_init+0x0/0x11 @ 1
[   36.548004] bus: 'i2c': add driver lm87
[   36.552054] i2c-core: driver [lm87] registered
[   36.556005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   36.568004] i2c i2c-0: Transaction failed (0x10)!
[   36.572002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   36.584004] i2c i2c-0: Transaction failed (0x10)!
[   36.588002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   36.600004] i2c i2c-0: Transaction failed (0x10)!
[   36.604007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   36.616004] i2c i2c-1: Transaction failed (0x10)!
[   36.620002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   36.632004] i2c i2c-1: Transaction failed (0x10)!
[   36.636002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   36.648004] i2c i2c-1: Transaction failed (0x10)!
[   36.652006] initcall sensors_lm87_init+0x0/0x11 returned 0 after 101562 usecs
[   36.656003] calling  sensors_lm95241_init+0x0/0x11 @ 1
[   36.664001] PPS event at 4294901462
[   36.668006] bus: 'i2c': add driver lm95241
[   36.672055] i2c-core: driver [lm95241] registered
[   36.676005] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   36.688004] i2c i2c-0: Transaction failed (0x10)!
[   36.692002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.704004] i2c i2c-0: Transaction failed (0x10)!
[   36.708002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.720004] i2c i2c-0: Transaction failed (0x10)!
[   36.724007] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   36.736004] i2c i2c-1: Transaction failed (0x10)!
[   36.740002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   36.752004] i2c i2c-1: Transaction failed (0x10)!
[   36.756002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   36.768004] i2c i2c-1: Transaction failed (0x10)!
[   36.772006] initcall sensors_lm95241_init+0x0/0x11 returned 0 after 101562 usecs
[   36.780003] calling  ltc4215_init+0x0/0x11 @ 1
[   36.784004] bus: 'i2c': add driver ltc4215
[   36.788055] i2c-core: driver [ltc4215] registered
[   36.792005] initcall ltc4215_init+0x0/0x11 returned 0 after 7812 usecs
[   36.800003] calling  sensors_max1619_init+0x0/0x11 @ 1
[   36.804006] bus: 'i2c': add driver max1619
[   36.808058] i2c-core: driver [max1619] registered
[   36.812005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   36.828004] i2c i2c-0: Transaction failed (0x10)!
[   36.832002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   36.844003] i2c i2c-0: Transaction failed (0x10)!
[   36.848002] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   36.860003] i2c i2c-0: Transaction failed (0x10)!
[   36.864002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   36.876003] i2c i2c-0: Transaction failed (0x10)!
[   36.880002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.892003] i2c i2c-0: Transaction failed (0x10)!
[   36.896002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.908003] i2c i2c-0: Transaction failed (0x10)!
[   36.912002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   36.924003] i2c i2c-0: Transaction failed (0x10)!
[   36.928002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   36.940003] i2c i2c-0: Transaction failed (0x10)!
[   36.944002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   36.956003] i2c i2c-0: Transaction failed (0x10)!
[   36.960007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   36.972004] i2c i2c-1: Transaction failed (0x10)!
[   36.976002] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   36.988003] i2c i2c-1: Transaction failed (0x10)!
[   36.992002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   37.004003] i2c i2c-1: Transaction failed (0x10)!
[   37.008002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   37.020003] i2c i2c-1: Transaction failed (0x10)!
[   37.024002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   37.036003] i2c i2c-1: Transaction failed (0x10)!
[   37.040002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   37.052004] i2c i2c-1: Transaction failed (0x10)!
[   37.056003] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   37.068004] i2c i2c-1: Transaction failed (0x10)!
[   37.072002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   37.084003] i2c i2c-1: Transaction failed (0x10)!
[   37.088002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   37.100003] i2c i2c-1: Transaction failed (0x10)!
[   37.104006] initcall sensors_max1619_init+0x0/0x11 returned 0 after 292968 usecs
[   37.112003] calling  sensors_max6650_init+0x0/0x11 @ 1
[   37.116004] bus: 'i2c': add driver max6650
[   37.120055] i2c-core: driver [max6650] registered
[   37.124005] i2c i2c-0: found normal entry for adapter 0, addr 0x1b
[   37.140004] i2c i2c-0: Transaction failed (0x10)!
[   37.144002] i2c i2c-0: found normal entry for adapter 0, addr 0x1f
[   37.156003] i2c i2c-0: Transaction failed (0x10)!
[   37.160002] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   37.172003] i2c i2c-0: Transaction failed (0x10)!
[   37.176002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   37.188003] i2c i2c-0: Transaction failed (0x10)!
[   37.192007] i2c i2c-1: found normal entry for adapter 1, addr 0x1b
[   37.204004] i2c i2c-1: Transaction failed (0x10)!
[   37.208002] i2c i2c-1: found normal entry for adapter 1, addr 0x1f
[   37.220003] i2c i2c-1: Transaction failed (0x10)!
[   37.224002] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   37.236003] i2c i2c-1: Transaction failed (0x10)!
[   37.240002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   37.252003] i2c i2c-1: Transaction failed (0x10)!
[   37.256006] initcall sensors_max6650_init+0x0/0x11 returned 0 after 136718 usecs
[   37.264003] calling  pc87360_init+0x0/0x13c @ 1
[   37.268015] pc87360: PC8736x not detected, module not inserted.
[   37.272003] initcall pc87360_init+0x0/0x13c returned -19 after 3906 usecs
[   37.280003] calling  pcf8591_init+0x0/0x32 @ 1
[   37.284004] bus: 'i2c': add driver pcf8591
[   37.288055] i2c-core: driver [pcf8591] registered
[   37.292005] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   37.308004] i2c i2c-0: Transaction failed (0x10)!
[   37.312002] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   37.324004] i2c i2c-0: Transaction failed (0x10)!
[   37.328002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   37.340003] i2c i2c-0: Transaction failed (0x10)!
[   37.344002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   37.356003] i2c i2c-0: Transaction failed (0x10)!
[   37.360002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   37.372003] i2c i2c-0: Transaction failed (0x10)!
[   37.376002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   37.388003] i2c i2c-0: Transaction failed (0x10)!
[   37.392002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   37.404003] i2c i2c-0: Transaction failed (0x10)!
[   37.408002] i2c i2c-0: found normal entry for adapter 0, addr 0x4f
[   37.420003] i2c i2c-0: Transaction failed (0x10)!
[   37.424007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   37.436004] i2c i2c-1: Transaction failed (0x10)!
[   37.440002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   37.452003] i2c i2c-1: Transaction failed (0x10)!
[   37.456002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   37.468003] i2c i2c-1: Transaction failed (0x10)!
[   37.472002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   37.484003] i2c i2c-1: Transaction failed (0x10)!
[   37.488002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   37.500003] i2c i2c-1: Transaction failed (0x10)!
[   37.504002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   37.516003] i2c i2c-1: Transaction failed (0x10)!
[   37.520002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   37.532003] i2c i2c-1: Transaction failed (0x10)!
[   37.536002] i2c i2c-1: found normal entry for adapter 1, addr 0x4f
[   37.548003] i2c i2c-1: Transaction failed (0x10)!
[   37.552006] initcall pcf8591_init+0x0/0x32 returned 0 after 261718 usecs
[   37.556003] calling  sht15_init+0x0/0x4a @ 1
[   37.560005] bus: 'platform': add driver sht10
[   37.568071] bus: 'platform': add driver sht11
[   37.572059] bus: 'platform': add driver sht15
[   37.576058] bus: 'platform': add driver sht71
[   37.580058] bus: 'platform': add driver sht75
[   37.584058] initcall sht15_init+0x0/0x4a returned 0 after 23437 usecs
[   37.592003] calling  sm_sis5595_init+0x0/0x16 @ 1
[   37.596014] bus: 'pci': add driver sis5595
[   37.600077] initcall sm_sis5595_init+0x0/0x16 returned 0 after 3906 usecs
[   37.604004] calling  smsc47b397_init+0x0/0x147 @ 1
[   37.612010] initcall smsc47b397_init+0x0/0x147 returned -19 after 0 usecs
[   37.616003] calling  sm_smsc47m1_init+0x0/0x21f @ 1
[   37.624010] initcall sm_smsc47m1_init+0x0/0x21f returned -19 after 0 usecs
[   37.628003] calling  smsc47m192_init+0x0/0x11 @ 1
[   37.636005] bus: 'i2c': add driver smsc47m192
[   37.640055] i2c-core: driver [smsc47m192] registered
[   37.644005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   37.656004] i2c i2c-0: Transaction failed (0x10)!
[   37.660002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   37.668001] PPS event at 4294901713
[   37.672004] i2c i2c-0: Transaction failed (0x10)!
[   37.676007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   37.688004] i2c i2c-1: Transaction failed (0x10)!
[   37.692002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   37.704004] i2c i2c-1: Transaction failed (0x10)!
[   37.708006] initcall smsc47m192_init+0x0/0x11 returned 0 after 70312 usecs
[   37.712003] calling  amc6821_init+0x0/0x11 @ 1
[   37.720004] bus: 'i2c': add driver amc6821
[   37.724055] i2c-core: driver [amc6821] registered
[   37.728005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   37.740004] i2c i2c-0: Transaction failed (0x10)!
[   37.744002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   37.756004] i2c i2c-0: Transaction failed (0x10)!
[   37.760002] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   37.772004] i2c i2c-0: Transaction failed (0x10)!
[   37.776002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   37.788004] i2c i2c-0: Transaction failed (0x10)!
[   37.792002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   37.804007] i2c i2c-0: Transaction failed (0x10)!
[   37.808002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   37.820004] i2c i2c-0: Transaction failed (0x10)!
[   37.824003] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   37.836004] i2c i2c-0: Transaction failed (0x10)!
[   37.840002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   37.852004] i2c i2c-0: Transaction failed (0x10)!
[   37.856002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   37.868003] i2c i2c-0: Transaction failed (0x10)!
[   37.872007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   37.884004] i2c i2c-1: Transaction failed (0x10)!
[   37.888002] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   37.900003] i2c i2c-1: Transaction failed (0x10)!
[   37.904002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   37.916004] i2c i2c-1: Transaction failed (0x10)!
[   37.920002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   37.932003] i2c i2c-1: Transaction failed (0x10)!
[   37.936002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   37.948003] i2c i2c-1: Transaction failed (0x10)!
[   37.952002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   37.964003] i2c i2c-1: Transaction failed (0x10)!
[   37.968002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   37.980003] i2c i2c-1: Transaction failed (0x10)!
[   37.984002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   37.996003] i2c i2c-1: Transaction failed (0x10)!
[   38.000002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   38.012003] i2c i2c-1: Transaction failed (0x10)!
[   38.016006] initcall amc6821_init+0x0/0x11 returned 0 after 289062 usecs
[   38.020003] calling  tmp102_init+0x0/0x11 @ 1
[   38.024004] bus: 'i2c': add driver tmp102
[   38.028055] i2c-core: driver [tmp102] registered
[   38.036004] initcall tmp102_init+0x0/0x11 returned 0 after 11718 usecs
[   38.040003] calling  via_cputemp_init+0x0/0x13f @ 1
[   38.044002] via_cputemp: Not a VIA CPU
[   38.048003] initcall via_cputemp_init+0x0/0x13f returned -19 after 3906 usecs
[   38.056003] calling  sm_vt8231_init+0x0/0x16 @ 1
[   38.060014] bus: 'pci': add driver vt8231
[   38.064075] initcall sm_vt8231_init+0x0/0x16 returned 0 after 3906 usecs
[   38.072004] calling  sensors_w83l785ts_init+0x0/0x11 @ 1
[   38.076005] bus: 'i2c': add driver w83l785ts
[   38.080057] i2c-core: driver [w83l785ts] registered
[   38.088005] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   38.100004] i2c i2c-0: Transaction failed (0x10)!
[   38.104007] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   38.116004] i2c i2c-1: Transaction failed (0x10)!
[   38.120006] initcall sensors_w83l785ts_init+0x0/0x11 returned 0 after 42968 usecs
[   38.128004] calling  sensors_w83l786ng_init+0x0/0x11 @ 1
[   38.132004] bus: 'i2c': add driver w83l786ng
[   38.136055] i2c-core: driver [w83l786ng] registered
[   38.140005] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   38.156004] i2c i2c-0: Transaction failed (0x10)!
[   38.160002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   38.172003] i2c i2c-0: Transaction failed (0x10)!
[   38.176007] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   38.188004] i2c i2c-1: Transaction failed (0x10)!
[   38.192002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   38.204003] i2c i2c-1: Transaction failed (0x10)!
[   38.208006] initcall sensors_w83l786ng_init+0x0/0x11 returned 0 after 74218 usecs
[   38.216003] calling  wm831x_hwmon_init+0x0/0xf @ 1
[   38.220006] bus: 'platform': add driver wm831x-hwmon
[   38.224059] initcall wm831x_hwmon_init+0x0/0xf returned 0 after 3906 usecs
[   38.232003] calling  pcwd_init_module+0x0/0x14 @ 1
[   38.236003] bus: 'isa': add driver pcwd
[   38.240063] device: 'pcwd.0': device_add
[   38.244008] bus: 'isa': add device pcwd.0
[   38.248013] PM: Adding info for isa:pcwd.0
[   38.252053] device: 'pcwd.0': device_unregister
[   38.256002] PM: Removing info for isa:pcwd.0
[   38.260022] bus: 'isa': remove device pcwd.0
[   38.264059] device: 'pcwd.1': device_add
[   38.268006] bus: 'isa': add device pcwd.1
[   38.272011] PM: Adding info for isa:pcwd.1
[   38.276051] device: 'pcwd.1': device_unregister
[   38.280002] PM: Removing info for isa:pcwd.1
[   38.284020] bus: 'isa': remove device pcwd.1
[   38.292039] device: 'pcwd.2': device_add
[   38.295957] bus: 'isa': add device pcwd.2
[   38.300011] PM: Adding info for isa:pcwd.2
[   38.304052] device: 'pcwd.2': device_unregister
[   38.308002] PM: Removing info for isa:pcwd.2
[   38.312020] bus: 'isa': remove device pcwd.2
[   38.316062] bus: 'isa': remove driver pcwd
[   38.320050] driver: 'pcwd': driver_release
[   38.324007] initcall pcwd_init_module+0x0/0x14 returned -19 after 85937 usecs
[   38.332003] calling  mixcomwd_init+0x0/0xf7 @ 1
[   38.336086] mixcomwd: No card detected, or port not available.
[   38.340004] initcall mixcomwd_init+0x0/0xf7 returned -19 after 3906 usecs
[   38.348003] calling  wdtpci_init+0x0/0x16 @ 1
[   38.352014] bus: 'pci': add driver wdt_pci
[   38.356068] initcall wdtpci_init+0x0/0x16 returned 0 after 3906 usecs
[   38.364003] calling  usb_pcwd_init+0x0/0x3c @ 1
[   38.368009] bus: 'usb': add driver pcwd_usb
[   38.372065] usbcore: registered new interface driver pcwd_usb
[   38.376002] pcwd_usb: Berkshire USB-PC Watchdog driver v1.02
[   38.384004] initcall usb_pcwd_init+0x0/0x3c returned 0 after 15625 usecs
[   38.388003] calling  acq_init+0x0/0x50 @ 1
[   38.392002] WDT driver for Acquire single board computer initialising.
[   38.400006] bus: 'platform': add driver acquirewdt
[   38.404060] Registering platform device 'acquirewdt'. Parent at platform
[   38.412003] device: 'acquirewdt': device_add
[   38.416006] bus: 'platform': add device acquirewdt
[   38.420013] PM: Adding info for platform:acquirewdt
[   38.424058] bus: 'platform': driver_probe_device: matched device acquirewdt with driver acquirewdt
[   38.436002] bus: 'platform': really_probe: probing driver acquirewdt with device acquirewdt
[   38.444010] acquirewdt: I/O address 0x0043 already in use
[   38.448009] acquirewdt: probe of acquirewdt failed with error -5
[   38.456004] initcall acq_init+0x0/0x50 returned 0 after 62500 usecs
[   38.460003] calling  watchdog_init+0x0/0x146 @ 1
[   38.464014] initcall watchdog_init+0x0/0x146 returned -19 after 0 usecs
[   38.472003] calling  geodewdt_init+0x0/0x45 @ 1
[   38.476005] bus: 'platform': add driver geodewdt
[   38.480060] Registering platform device 'geodewdt'. Parent at platform
[   38.488003] device: 'geodewdt': device_add
[   38.492015] bus: 'platform': add device geodewdt
[   38.496013] PM: Adding info for platform:geodewdt
[   38.500057] bus: 'platform': driver_probe_device: matched device geodewdt with driver geodewdt
[   38.512002] bus: 'platform': really_probe: probing driver geodewdt with device geodewdt
[   38.520006] geodewdt:  No timers were available
[   38.524014] initcall geodewdt_init+0x0/0x45 returned 0 after 46875 usecs
[   38.528003] calling  sc520_wdt_init+0x0/0xd0 @ 1
[   38.532020] device: 'watchdog': device_add
[   38.540139] PM: Adding info for No Bus:watchdog
[   38.544053] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=1)
[   38.552005] initcall sc520_wdt_init+0x0/0xd0 returned 0 after 19531 usecs
[   38.556003] calling  ibmasr_init+0x0/0x235 @ 1
[   38.560004] initcall ibmasr_init+0x0/0x235 returned -19 after 0 usecs
[   38.568003] calling  wafwdt_init+0x0/0x141 @ 1
[   38.572002] WDT driver for Wafer 5823 single board computer initialising.
[   38.580005] Wafer 5823 WDT: cannot register miscdev on minor=130 (err=-16)
[   38.588009] initcall wafwdt_init+0x0/0x141 returned -16 after 15625 usecs
[   38.592006] initcall wafwdt_init+0x0/0x141 returned with error code -16 
[   38.600003] calling  watchdog_init+0x0/0x16 @ 1
[   38.604017] bus: 'pci': add driver i6300ESB timer
[   38.608078] initcall watchdog_init+0x0/0x16 returned 0 after 3906 usecs
[   38.616004] calling  iTCO_wdt_init_module+0x0/0x56 @ 1
[   38.620002] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   38.628006] bus: 'platform': add driver iTCO_wdt
[   38.632065] Registering platform device 'iTCO_wdt'. Parent at platform
[   38.636003] device: 'iTCO_wdt': device_add
[   38.640006] bus: 'platform': add device iTCO_wdt
[   38.648013] PM: Adding info for platform:iTCO_wdt
[   38.652064] bus: 'platform': driver_probe_device: matched device iTCO_wdt with driver iTCO_wdt
[   38.660002] bus: 'platform': really_probe: probing driver iTCO_wdt with device iTCO_wdt
[   38.668002] PPS event at 4294901963
[   38.672094] iTCO_wdt: No card detected
[   38.676011] initcall iTCO_wdt_init_module+0x0/0x56 returned 0 after 54687 usecs
[   38.684003] calling  iTCO_vendor_init_module+0x0/0x17 @ 1
[   38.688002] iTCO_vendor_support: vendor-support=0
[   38.692004] initcall iTCO_vendor_init_module+0x0/0x17 returned 0 after 3906 usecs
[   38.700003] calling  it87_wdt_init+0x0/0x460 @ 1
[   38.704021] IT87 WDT: Unsupported Chip found, Chip 8712 Revision 07
[   38.712004] initcall it87_wdt_init+0x0/0x460 returned -19 after 7812 usecs
[   38.716003] calling  hpwdt_init+0x0/0x16 @ 1
[   38.724014] bus: 'pci': add driver hpwdt
[   38.727931] initcall hpwdt_init+0x0/0x16 returned 0 after 3906 usecs
[   38.732003] calling  scx200_wdt_init+0x0/0xd9 @ 1
[   38.736002] scx200_wdt: NatSemi SCx200 Watchdog Driver
[   38.744004] initcall scx200_wdt_init+0x0/0xd9 returned -19 after 7812 usecs
[   38.748003] calling  sbc60xxwdt_init+0x0/0x15a @ 1
[   38.752004] sbc60xxwdt: cannot register miscdev on minor=130 (err=-16)
[   38.760006] initcall sbc60xxwdt_init+0x0/0x15a returned -16 after 7812 usecs
[   38.768004] initcall sbc60xxwdt_init+0x0/0x15a returned with error code -16 
[   38.776003] calling  sbc7240_wdt_init+0x0/0xf6 @ 1
[   38.780003] sbc7240_wdt: timeout set to 30 seconds
[   38.784003] sbc7240_wdt: cannot register miscdev on minor=130 (err=-16)
[   38.792006] initcall sbc7240_wdt_init+0x0/0xf6 returned -16 after 11718 usecs
[   38.796004] initcall sbc7240_wdt_init+0x0/0xf6 returned with error code -16 
[   38.804008] calling  sch311x_wdt_init+0x0/0x12b @ 1
[   38.808022] initcall sch311x_wdt_init+0x0/0x12b returned -19 after 0 usecs
[   38.816003] calling  wb_smsc_wdt_init+0x0/0x184 @ 1
[   38.820003] SMsC 37B787 watchdog component driver 1.1 initialising...
[   38.829023] smsc37b787_wdt: Unable to register miscdev on minor 130
[   38.832011] initcall wb_smsc_wdt_init+0x0/0x184 returned -16 after 11718 usecs
[   38.836004] initcall wb_smsc_wdt_init+0x0/0x184 returned with error code -16 
[   38.840004] calling  wdt_init+0x0/0x1b5 @ 1
[   38.844003] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.
[   38.848020] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec
[   38.852016] w83627hf/thf/hg WDT: cannot register miscdev on minor=130 (err=-16)
[   38.856007] initcall wdt_init+0x0/0x1b5 returned -16 after 11718 usecs
[   38.860003] initcall wdt_init+0x0/0x1b5 returned with error code -16 
[   38.864004] calling  w83977f_wdt_init+0x0/0x126 @ 1
[   38.868002] W83977F WDT: W83977F WDT driver, v1.00
[   38.872004] W83977F WDT: cannot register miscdev on minor=130 (err=-16)
[   38.876006] initcall w83977f_wdt_init+0x0/0x126 returned -16 after 7812 usecs
[   38.880004] initcall w83977f_wdt_init+0x0/0x126 returned with error code -16 
[   38.884003] calling  zf_init+0x0/0x142 @ 1
[   38.888002] machzwd: MachZ ZF-Logic Watchdog driver initializing.
[   38.892004] machzwd: no ZF-Logic found
[   38.896004] initcall zf_init+0x0/0x142 returned -19 after 7812 usecs
[   38.900003] calling  watchdog_init+0x0/0xa0 @ 1
[   38.904004] epx_c3: cannot register miscdev on minor=130 (err=-16)
[   38.908006] initcall watchdog_init+0x0/0xa0 returned -16 after 3906 usecs
[   38.912004] initcall watchdog_init+0x0/0xa0 returned with error code -16 
[   38.916004] calling  wm831x_wdt_init+0x0/0xf @ 1
[   38.920010] bus: 'platform': add driver wm831x-watchdog
[   38.924078] initcall wm831x_wdt_init+0x0/0xf returned 0 after 3906 usecs
[   38.928005] calling  watchdog_init+0x0/0xa0 @ 1
[   38.932003] SoftDog: cannot register miscdev on minor=130 (err=-16)
[   38.936004] initcall watchdog_init+0x0/0xa0 returned -16 after 3906 usecs
[   38.940004] initcall watchdog_init+0x0/0xa0 returned with error code -16 
[   38.944003] calling  linear_init+0x0/0xf @ 1
[   38.948002] md: linear personality registered for level -1
[   38.952004] initcall linear_init+0x0/0xf returned 0 after 3906 usecs
[   38.956004] calling  raid0_init+0x0/0xf @ 1
[   38.960002] md: raid0 personality registered for level 0
[   38.964004] initcall raid0_init+0x0/0xf returned 0 after 3906 usecs
[   38.968004] calling  raid_init+0x0/0xf @ 1
[   38.972002] md: raid1 personality registered for level 1
[   38.976004] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   38.980003] calling  raid_init+0x0/0xf @ 1
[   38.984002] md: raid10 personality registered for level 10
[   38.988004] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   38.992003] calling  raid5_init+0x0/0x25 @ 1
[   38.996002] md: raid6 personality registered for level 6
[   39.000003] md: raid5 personality registered for level 5
[   39.004002] md: raid4 personality registered for level 4
[   39.008004] initcall raid5_init+0x0/0x25 returned 0 after 11718 usecs
[   39.012004] calling  multipath_init+0x0/0xf @ 1
[   39.016002] md: multipath personality registered for level -4
[   39.020004] initcall multipath_init+0x0/0xf returned 0 after 3906 usecs
[   39.024004] calling  raid_init+0x0/0xf @ 1
[   39.028002] md: faulty personality registered for level -5
[   39.032003] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   39.036004] calling  vhci_init+0x0/0x1e @ 1
[   39.040002] Bluetooth: Virtual HCI driver ver 1.3
[   39.044008] device: 'vhci': device_add
[   39.048177] PM: Adding info for No Bus:vhci
[   39.052056] initcall vhci_init+0x0/0x1e returned 0 after 11718 usecs
[   39.056003] calling  bcm203x_init+0x0/0x44 @ 1
[   39.060003] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[   39.064011] bus: 'usb': add driver bcm203x
[   39.068068] usbcore: registered new interface driver bcm203x
[   39.072005] initcall bcm203x_init+0x0/0x44 returned 0 after 11718 usecs
[   39.076003] calling  bpa10x_init+0x0/0x25 @ 1
[   39.080002] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[   39.084007] bus: 'usb': add driver bpa10x
[   39.088059] usbcore: registered new interface driver bpa10x
[   39.092004] initcall bpa10x_init+0x0/0x25 returned 0 after 11718 usecs
[   39.096004] calling  bfusb_init+0x0/0x44 @ 1
[   39.100002] Bluetooth: BlueFRITZ! USB driver ver 1.2
[   39.104006] bus: 'usb': add driver bfusb
[   39.108059] usbcore: registered new interface driver bfusb
[   39.112004] initcall bfusb_init+0x0/0x44 returned 0 after 11718 usecs
[   39.116003] calling  btusb_init+0x0/0x25 @ 1
[   39.120002] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   39.124006] bus: 'usb': add driver btusb
[   39.128059] usbcore: registered new interface driver btusb
[   39.132004] initcall btusb_init+0x0/0x25 returned 0 after 11718 usecs
[   39.136003] calling  kcapi_init+0x0/0x26 @ 1
[   39.140072] initcall kcapi_init+0x0/0x26 returned 0 after 0 usecs
[   39.144005] calling  capi_init+0x0/0x22f @ 1
[   39.148009] device class 'capi': registering
[   39.152066] device: 'capi': device_add
[   39.156110] PM: Adding info for No Bus:capi
[   39.160070] CAPI 2.0 started up with major 68 (middleware+capifs)
[   39.164005] initcall capi_init+0x0/0x22f returned 0 after 15625 usecs
[   39.168005] calling  capifs_init+0x0/0xf @ 1
[   39.172013] initcall capifs_init+0x0/0xf returned 0 after 0 usecs
[   39.176004] calling  gigaset_init_module+0x0/0x29 @ 1
[   39.180002] gigaset: Driver for Gigaset 307x (debug build)
[   39.184002] gigaset: Kernel CAPI interface
[   39.188004] initcall gigaset_init_module+0x0/0x29 returned 0 after 7812 usecs
[   39.192004] calling  usb_gigaset_init+0x0/0x81 @ 1
[   39.196033] bus: 'usb': add driver usb_gigaset
[   39.200065] usbcore: registered new interface driver usb_gigaset
[   39.204002] usb_gigaset: USB Driver for Gigaset 307x using M105
[   39.208004] initcall usb_gigaset_init+0x0/0x81 returned 0 after 11718 usecs
[   39.212003] calling  cpufreq_stats_init+0x0/0xa8 @ 1
[   39.216008] initcall cpufreq_stats_init+0x0/0xa8 returned 0 after 0 usecs
[   39.220003] calling  cpufreq_gov_powersave_init+0x0/0xf @ 1
[   39.224005] initcall cpufreq_gov_powersave_init+0x0/0xf returned 0 after 0 usecs
[   39.228004] calling  cpufreq_gov_userspace_init+0x0/0xf @ 1
[   39.232004] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 0 usecs
[   39.236003] calling  init_ladder+0x0/0xf @ 1
[   39.240004] cpuidle: using governor ladder
[   39.244004] initcall init_ladder+0x0/0xf returned 0 after 3906 usecs
[   39.248004] calling  init_menu+0x0/0xf @ 1
[   39.252002] cpuidle: using governor menu
[   39.256004] initcall init_menu+0x0/0xf returned 0 after 3906 usecs
[   39.260003] calling  memstick_init+0x0/0x6f @ 1
[   39.264087] bus: 'memstick': registered
[   39.268003] device class 'memstick_host': registering
[   39.272063] initcall memstick_init+0x0/0x6f returned 0 after 7812 usecs
[   39.280004] calling  mspro_block_init+0x0/0x63 @ 1
[   39.284004] bus: 'memstick': add driver mspro_block
[   39.288056] initcall mspro_block_init+0x0/0x63 returned 0 after 3906 usecs
[   39.296003] calling  tifm_ms_init+0x0/0xf @ 1
[   39.300003] bus: 'tifm': add driver tifm_ms
[   39.304056] initcall tifm_ms_init+0x0/0xf returned 0 after 3906 usecs
[   39.312003] calling  jmb38x_ms_init+0x0/0x16 @ 1
[   39.316015] bus: 'pci': add driver jmb38x_ms
[   39.320066] initcall jmb38x_ms_init+0x0/0x16 returned 0 after 3906 usecs
[   39.328004] calling  bd2802_init+0x0/0x11 @ 1
[   39.332007] bus: 'i2c': add driver BD2802
[   39.336072] i2c-core: driver [BD2802] registered
[   39.340005] initcall bd2802_init+0x0/0x11 returned 0 after 7812 usecs
[   39.348003] calling  pca9532_init+0x0/0x11 @ 1
[   39.352005] bus: 'i2c': add driver pca9532
[   39.356054] i2c-core: driver [pca9532] registered
[   39.360004] initcall pca9532_init+0x0/0x11 returned 0 after 7812 usecs
[   39.368003] calling  lp3944_module_init+0x0/0x11 @ 1
[   39.372004] bus: 'i2c': add driver lp3944
[   39.376054] i2c-core: driver [lp3944] registered
[   39.380004] initcall lp3944_module_init+0x0/0x11 returned 0 after 7812 usecs
[   39.388003] calling  regulator_led_init+0x0/0xf @ 1
[   39.392006] bus: 'platform': add driver leds-regulator
[   39.396062] initcall regulator_led_init+0x0/0xf returned 0 after 3906 usecs
[   39.404003] calling  timer_trig_init+0x0/0xf @ 1
[   39.408004] initcall timer_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.416003] calling  heartbeat_trig_init+0x0/0xf @ 1
[   39.420003] initcall heartbeat_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.428002] calling  bl_trig_init+0x0/0xf @ 1
[   39.432003] initcall bl_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.436003] calling  gpio_trig_init+0x0/0xf @ 1
[   39.440003] initcall gpio_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.448002] calling  defon_trig_init+0x0/0xf @ 1
[   39.452003] initcall defon_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.460002] calling  ib_core_init+0x0/0x3a @ 1
[   39.464002] device class 'infiniband': registering
[   39.468054] initcall ib_core_init+0x0/0x3a returned 0 after 3906 usecs
[   39.476003] calling  ib_mad_init_module+0x0/0xbf @ 1
[   39.480185] initcall ib_mad_init_module+0x0/0xbf returned 0 after 0 usecs
[   39.488003] calling  ib_sa_init+0x0/0x57 @ 1
[   39.492060] initcall ib_sa_init+0x0/0x57 returned 0 after 0 usecs
[   39.496003] calling  ib_cm_init+0x0/0x156 @ 1
[   39.500030] device class 'infiniband_cm': registering
[   39.504070] initcall ib_cm_init+0x0/0x156 returned 0 after 3906 usecs
[   39.508003] calling  iw_cm_init+0x0/0x2c @ 1
[   39.512049] initcall iw_cm_init+0x0/0x2c returned 0 after 0 usecs
[   39.520004] calling  addr_init+0x0/0x3b @ 1
[   39.524042] initcall addr_init+0x0/0x3b returned 0 after 0 usecs
[   39.528005] calling  cma_init+0x0/0x89 @ 1
[   39.532042] initcall cma_init+0x0/0x89 returned 0 after 0 usecs
[   39.536003] calling  ib_umad_init+0x0/0xa9 @ 1
[   39.540005] device class 'infiniband_mad': registering
[   39.544060] initcall ib_umad_init+0x0/0xa9 returned 0 after 3906 usecs
[   39.552003] calling  ib_uverbs_init+0x0/0xa9 @ 1
[   39.556004] device class 'infiniband_verbs': registering
[   39.564064] initcall ib_uverbs_init+0x0/0xa9 returned 0 after 7812 usecs
[   39.568003] calling  ib_ucm_init+0x0/0x8d @ 1
[   39.572014] initcall ib_ucm_init+0x0/0x8d returned 0 after 0 usecs
[   39.580003] calling  ucma_init+0x0/0x45 @ 1
[   39.584008] device: 'rdma_cm': device_add
[   39.588174] PM: Adding info for No Bus:rdma_cm
[   39.592056] initcall ucma_init+0x0/0x45 returned 0 after 7812 usecs
[   39.600003] calling  iwch_init_module+0x0/0x33 @ 1
[   39.605299] initcall iwch_init_module+0x0/0x33 returned 0 after 0 usecs
[   39.608004] calling  c4iw_init_module+0x0/0x42 @ 1
[   39.612052] initcall c4iw_init_module+0x0/0x42 returned 0 after 0 usecs
[   39.620003] calling  mlx4_ib_init+0x0/0xf @ 1
[   39.624003] initcall mlx4_ib_init+0x0/0xf returned 0 after 0 usecs
[   39.628003] calling  ipoib_init_module+0x0/0xf3 @ 1
[   39.636079] initcall ipoib_init_module+0x0/0xf3 returned 0 after 0 usecs
[   39.640003] calling  dcdbas_init+0x0/0x53 @ 1
[   39.644009] bus: 'platform': add driver dcdbas
[   39.652019] Registering platform device 'dcdbas'. Parent at platform
[   39.656003] device: 'dcdbas': device_add
[   39.660009] bus: 'platform': add device dcdbas
[   39.664015] PM: Adding info for platform:dcdbas
[   39.668074] bus: 'platform': driver_probe_device: matched device dcdbas with driver dcdbas
[   39.672003] bus: 'platform': really_probe: probing driver dcdbas with device dcdbas
[   39.672003] PPS event at 4294902214
[   39.676018] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   39.680002] driver: 'dcdbas': driver_bound: bound to device 'dcdbas'
[   39.684003] bus: 'platform': really_probe: bound device dcdbas to driver dcdbas
[   39.692006] initcall dcdbas_init+0x0/0x53 returned 0 after 46875 usecs
[   39.696003] calling  padlock_init+0x0/0xc4 @ 1
[   39.700002] padlock: VIA PadLock not detected.
[   39.704003] initcall padlock_init+0x0/0xc4 returned -19 after 3906 usecs
[   39.708003] calling  padlock_init+0x0/0x6e @ 1
[   39.712002] padlock: VIA PadLock Hash Engine not detected.
[   39.716003] initcall padlock_init+0x0/0x6e returned -19 after 3906 usecs
[   39.720003] calling  hifn_init+0x0/0x98 @ 1
[   39.724018] bus: 'pci': add driver hifn795x
[   39.728085] Driver for HIFN 795x crypto accelerator chip has been successfully registered.
[   39.732004] initcall hifn_init+0x0/0x98 returned 0 after 7812 usecs
[   39.736003] calling  init_hrt_clocksource+0x0/0x134 @ 1
[   39.740003] initcall init_hrt_clocksource+0x0/0x134 returned -19 after 0 usecs
[   39.744004] calling  cs5535_mfgpt_init+0x0/0x174 @ 1
[   39.748003] cs5535-clockevt: Could not allocate MFPGT timer
[   39.752003] initcall cs5535_mfgpt_init+0x0/0x174 returned -19 after 3906 usecs
[   39.756003] calling  hid_init+0x0/0x58 @ 1
[   39.760072] bus: 'hid': registered
[   39.763476] device class 'hidraw': registering
[   39.768042] initcall hid_init+0x0/0x58 returned 0 after 7812 usecs
[   39.772004] calling  mmm_init+0x0/0x16 @ 1
[   39.776002] bus: 'hid': add driver 3m-pct
[   39.780057] initcall mmm_init+0x0/0x16 returned 0 after 3906 usecs
[   39.784003] calling  a4_init+0x0/0x16 @ 1
[   39.788002] bus: 'hid': add driver a4tech
[   39.792056] initcall a4_init+0x0/0x16 returned 0 after 3906 usecs
[   39.796003] calling  apple_init+0x0/0x2d @ 1
[   39.800002] bus: 'hid': add driver apple
[   39.804056] initcall apple_init+0x0/0x2d returned 0 after 3906 usecs
[   39.808003] calling  ch_init+0x0/0x16 @ 1
[   39.812003] bus: 'hid': add driver chicony
[   39.816066] initcall ch_init+0x0/0x16 returned 0 after 3906 usecs
[   39.820003] calling  cp_init+0x0/0x16 @ 1
[   39.824002] bus: 'hid': add driver cypress
[   39.828056] initcall cp_init+0x0/0x16 returned 0 after 3906 usecs
[   39.832003] calling  dr_init+0x0/0x16 @ 1
[   39.836002] bus: 'hid': add driver dragonrise
[   39.840056] initcall dr_init+0x0/0x16 returned 0 after 3906 usecs
[   39.844003] calling  egalax_init+0x0/0x16 @ 1
[   39.848002] bus: 'hid': add driver egalax-touch
[   39.852057] initcall egalax_init+0x0/0x16 returned 0 after 3906 usecs
[   39.856003] calling  ez_init+0x0/0x16 @ 1
[   39.860002] bus: 'hid': add driver ezkey
[   39.864076] initcall ez_init+0x0/0x16 returned 0 after 3906 usecs
[   39.868003] calling  gyration_init+0x0/0x16 @ 1
[   39.872002] bus: 'hid': add driver gyration
[   39.876057] initcall gyration_init+0x0/0x16 returned 0 after 3906 usecs
[   39.880003] calling  kye_init+0x0/0x16 @ 1
[   39.884002] bus: 'hid': add driver kye
[   39.888056] initcall kye_init+0x0/0x16 returned 0 after 3906 usecs
[   39.892003] calling  lg_init+0x0/0x16 @ 1
[   39.896002] bus: 'hid': add driver logitech
[   39.900056] initcall lg_init+0x0/0x16 returned 0 after 3906 usecs
[   39.904003] calling  magicmouse_init+0x0/0x2d @ 1
[   39.908002] bus: 'hid': add driver magicmouse
[   39.912056] initcall magicmouse_init+0x0/0x2d returned 0 after 3906 usecs
[   39.916003] calling  mr_init+0x0/0x16 @ 1
[   39.920002] bus: 'hid': add driver monterey
[   39.924056] initcall mr_init+0x0/0x16 returned 0 after 3906 usecs
[   39.928003] calling  mosart_init+0x0/0x16 @ 1
[   39.932003] bus: 'hid': add driver mosart
[   39.936056] initcall mosart_init+0x0/0x16 returned 0 after 3906 usecs
[   39.940003] calling  ntrig_init+0x0/0x16 @ 1
[   39.944002] bus: 'hid': add driver ntrig
[   39.948056] initcall ntrig_init+0x0/0x16 returned 0 after 3906 usecs
[   39.952003] calling  ortek_init+0x0/0x16 @ 1
[   39.956002] bus: 'hid': add driver ortek
[   39.960066] initcall ortek_init+0x0/0x16 returned 0 after 3906 usecs
[   39.964003] calling  quanta_init+0x0/0x16 @ 1
[   39.968002] bus: 'hid': add driver quanta-touch
[   39.972069] initcall quanta_init+0x0/0x16 returned 0 after 3906 usecs
[   39.976003] calling  pl_init+0x0/0x16 @ 1
[   39.980002] bus: 'hid': add driver pantherlord
[   39.984056] initcall pl_init+0x0/0x16 returned 0 after 3906 usecs
[   39.988003] calling  pl_init+0x0/0x16 @ 1
[   39.992002] bus: 'hid': add driver petalynx
[   39.996056] initcall pl_init+0x0/0x16 returned 0 after 3906 usecs
[   40.000003] calling  picolcd_init+0x0/0x16 @ 1
[   40.004003] bus: 'hid': add driver hid-picolcd
[   40.008056] initcall picolcd_init+0x0/0x16 returned 0 after 3906 usecs
[   40.012004] calling  roccat_init+0x0/0x92 @ 1
[   40.016004] device class 'roccat': registering
[   40.020056] initcall roccat_init+0x0/0x92 returned 0 after 3906 usecs
[   40.024003] calling  kone_init+0x0/0x16 @ 1
[   40.028002] bus: 'hid': add driver kone
[   40.032057] initcall kone_init+0x0/0x16 returned 0 after 3906 usecs
[   40.036003] calling  samsung_init+0x0/0x16 @ 1
[   40.040002] bus: 'hid': add driver samsung
[   40.044056] initcall samsung_init+0x0/0x16 returned 0 after 3906 usecs
[   40.048003] calling  sjoy_init+0x0/0x16 @ 1
[   40.052003] bus: 'hid': add driver smartjoyplus
[   40.056057] initcall sjoy_init+0x0/0x16 returned 0 after 3906 usecs
[   40.060003] calling  sony_init+0x0/0x16 @ 1
[   40.064002] bus: 'hid': add driver sony
[   40.068074] initcall sony_init+0x0/0x16 returned 0 after 3906 usecs
[   40.072003] calling  stantum_init+0x0/0x16 @ 1
[   40.076002] bus: 'hid': add driver stantum
[   40.080058] initcall stantum_init+0x0/0x16 returned 0 after 3906 usecs
[   40.084003] calling  sp_init+0x0/0x16 @ 1
[   40.088002] bus: 'hid': add driver sunplus
[   40.092057] initcall sp_init+0x0/0x16 returned 0 after 3906 usecs
[   40.096003] calling  ga_init+0x0/0x16 @ 1
[   40.100002] bus: 'hid': add driver greenasia
[   40.104056] initcall ga_init+0x0/0x16 returned 0 after 3906 usecs
[   40.108003] calling  ts_init+0x0/0x16 @ 1
[   40.112002] bus: 'hid': add driver topseed
[   40.116056] initcall ts_init+0x0/0x16 returned 0 after 3906 usecs
[   40.120003] calling  twinhan_init+0x0/0x16 @ 1
[   40.124002] bus: 'hid': add driver twinhan
[   40.128056] initcall twinhan_init+0x0/0x16 returned 0 after 3906 usecs
[   40.132003] calling  zp_init+0x0/0x16 @ 1
[   40.136002] bus: 'hid': add driver zeroplus
[   40.140056] initcall zp_init+0x0/0x16 returned 0 after 3906 usecs
[   40.144003] calling  wacom_init+0x0/0x2d @ 1
[   40.148002] bus: 'hid': add driver wacom
[   40.152056] initcall wacom_init+0x0/0x2d returned 0 after 3906 usecs
[   40.156003] calling  hid_init+0x0/0x9a @ 1
[   40.160043] bus: 'hid': add driver generic-usb
[   40.164074] bus: 'usb': add driver usbhid
[   40.168067] usbcore: registered new interface driver usbhid
[   40.172001] usbhid: USB HID core driver
[   40.176004] initcall hid_init+0x0/0x9a returned 0 after 15625 usecs
[   40.184003] calling  dell_init+0x0/0x3c9 @ 1
[   40.188004] initcall dell_init+0x0/0x3c9 returned -19 after 0 usecs
[   40.192003] calling  oss_init+0x0/0x110 @ 1
[   40.196008] device: 'sequencer': device_add
[   40.200159] PM: Adding info for No Bus:sequencer
[   40.208057] device: 'sequencer2': device_add
[   40.212074] PM: Adding info for No Bus:sequencer2
[   40.216054] device: 'dspW': device_add
[   40.220084] PM: Adding info for No Bus:dspW
[   40.224055] device: 'audio': device_add
[   40.228077] PM: Adding info for No Bus:audio
[   40.232052] initcall oss_init+0x0/0x110 returned 0 after 35156 usecs
[   40.236003] calling  init_ad1848+0x0/0x1f9 @ 1
[   40.244002] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
[   40.248002] ad1848: No ISAPnP cards found, trying standard ones...
[   40.256003] initcall init_ad1848+0x0/0x1f9 returned 0 after 11718 usecs
[   40.264003] calling  init_pas2+0x0/0x430 @ 1
[   40.268002] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996
[   40.276001] I/O, IRQ, DMA and type are mandatory
[   40.280003] initcall init_pas2+0x0/0x430 returned -22 after 11718 usecs
[   40.284003] initcall init_pas2+0x0/0x430 returned with error code -22 
[   40.292003] calling  sb_init+0x0/0x1c5 @ 1
[   40.296002] sb: Init: Starting Probe...
[   40.300004] bus: 'pnp': add driver OSS SndBlstr
[   40.304055] sb: Init: Done
[   40.308012] bus: 'pnp': remove driver OSS SndBlstr
[   40.312049] driver: 'OSS SndBlstr': driver_release
[   40.316007] initcall sb_init+0x0/0x1c5 returned -19 after 19531 usecs
[   40.324003] calling  init_uart401+0x0/0x45 @ 1
[   40.328003] initcall init_uart401+0x0/0x45 returned 0 after 0 usecs
[   40.336003] calling  init_opl3+0x0/0x522 @ 1
[   40.340002] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
[   40.348003] initcall init_opl3+0x0/0x522 returned 0 after 7812 usecs
[   40.352003] calling  init_vmidi+0x0/0x2cb @ 1
[   40.356001] MIDI Loopback device driver
[   40.360007] device: 'midi': device_add
[   40.364075] PM: Adding info for No Bus:midi
[   40.368093] device: 'midi1': device_add
[   40.372078] PM: Adding info for No Bus:midi1
[   40.376071] initcall init_vmidi+0x0/0x2cb returned 0 after 19531 usecs
[   40.384004] calling  oprofile_init+0x0/0x4c @ 1
[   40.388003] Registering sysdev class 'oprofile'
[   40.392062] Registering sys device of class 'oprofile'
[   40.400005] Registering sys device 'oprofile0'
[   40.404045] oprofile: using NMI interrupt.
[   40.408013] initcall oprofile_init+0x0/0x4c returned 0 after 19531 usecs
[   40.412006] calling  flow_cache_init_global+0x0/0x159 @ 1
[   40.420204] initcall flow_cache_init_global+0x0/0x159 returned 0 after 0 usecs
[   40.428004] calling  pg_init+0x0/0x2d0 @ 1
[   40.432002] pktgen 2.73: Packet Generator for packet performance testing.
[   40.436044] initcall pg_init+0x0/0x2d0 returned 0 after 3906 usecs
[   40.440005] calling  llc_init+0x0/0x1b @ 1
[   40.444004] initcall llc_init+0x0/0x1b returned 0 after 0 usecs
[   40.448003] calling  snap_init+0x0/0x31 @ 1
[   40.452010] initcall snap_init+0x0/0x31 returned 0 after 0 usecs
[   40.456003] calling  rif_init+0x0/0x5b @ 1
[   40.460013] initcall rif_init+0x0/0x5b returned 0 after 0 usecs
[   40.464004] calling  nfnetlink_init+0x0/0x1e @ 1
[   40.468002] Netfilter messages via NETLINK v0.30.
[   40.472020] initcall nfnetlink_init+0x0/0x1e returned 0 after 3906 usecs
[   40.476004] calling  nfnetlink_log_init+0x0/0xb3 @ 1
[   40.480015] initcall nfnetlink_log_init+0x0/0xb3 returned 0 after 0 usecs
[   40.484003] calling  nf_conntrack_standalone_init+0x0/0xf @ 1
[   40.488004] nf_conntrack version 0.5.0 (15860 buckets, 63440 max)
[   40.496199] initcall nf_conntrack_standalone_init+0x0/0xf returned 0 after 7812 usecs
[   40.500005] calling  nf_conntrack_ftp_init+0x0/0x1d0 @ 1
[   40.504008] initcall nf_conntrack_ftp_init+0x0/0x1d0 returned 0 after 0 usecs
[   40.508003] calling  nf_conntrack_irc_init+0x0/0x17c @ 1
[   40.512008] initcall nf_conntrack_irc_init+0x0/0x17c returned 0 after 0 usecs
[   40.516003] calling  xt_init+0x0/0x11f @ 1
[   40.520008] initcall xt_init+0x0/0x11f returned 0 after 0 usecs
[   40.524004] calling  tcpudp_mt_init+0x0/0x14 @ 1
[   40.528005] initcall tcpudp_mt_init+0x0/0x14 returned 0 after 0 usecs
[   40.532004] calling  connsecmark_tg_init+0x0/0xf @ 1
[   40.536010] initcall connsecmark_tg_init+0x0/0xf returned 0 after 0 usecs
[   40.540003] calling  nflog_tg_init+0x0/0xf @ 1
[   40.544003] initcall nflog_tg_init+0x0/0xf returned 0 after 0 usecs
[   40.548003] calling  tcpmss_tg_init+0x0/0x14 @ 1
[   40.552004] initcall tcpmss_tg_init+0x0/0x14 returned 0 after 0 usecs
[   40.556003] calling  conntrack_mt_init+0x0/0x14 @ 1
[   40.560004] initcall conntrack_mt_init+0x0/0x14 returned 0 after 0 usecs
[   40.564003] calling  policy_mt_init+0x0/0x14 @ 1
[   40.568004] initcall policy_mt_init+0x0/0x14 returned 0 after 0 usecs
[   40.572004] calling  ip_vs_init+0x0/0xa5 @ 1
[   40.576069] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[   40.580176] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[   40.588021] IPVS: ipvs loaded.
[   40.591076] initcall ip_vs_init+0x0/0xa5 returned 0 after 11718 usecs
[   40.592003] calling  ip_vs_rr_init+0x0/0xf @ 1
[   40.596003] IPVS: [rr] scheduler registered.
[   40.600003] initcall ip_vs_rr_init+0x0/0xf returned 0 after 3906 usecs
[   40.604003] calling  ip_vs_wrr_init+0x0/0xf @ 1
[   40.608003] IPVS: [wrr] scheduler registered.
[   40.612004] initcall ip_vs_wrr_init+0x0/0xf returned 0 after 3906 usecs
[   40.616003] calling  ip_vs_lc_init+0x0/0xf @ 1
[   40.620003] IPVS: [lc] scheduler registered.
[   40.624003] initcall ip_vs_lc_init+0x0/0xf returned 0 after 3906 usecs
[   40.628003] calling  ip_vs_wlc_init+0x0/0xf @ 1
[   40.632003] IPVS: [wlc] scheduler registered.
[   40.636005] initcall ip_vs_wlc_init+0x0/0xf returned 0 after 3906 usecs
[   40.640004] calling  ip_vs_lblcr_init+0x0/0x37 @ 1
[   40.644003] IPVS: [lblcr] scheduler registered.
[   40.648003] initcall ip_vs_lblcr_init+0x0/0x37 returned 0 after 3906 usecs
[   40.652004] calling  ip_vs_dh_init+0x0/0xf @ 1
[   40.656003] IPVS: [dh] scheduler registered.
[   40.660003] initcall ip_vs_dh_init+0x0/0xf returned 0 after 3906 usecs
[   40.664003] calling  ip_vs_sh_init+0x0/0xf @ 1
[   40.668002] IPVS: [sh] scheduler registered.
[   40.672004] initcall ip_vs_sh_init+0x0/0xf returned 0 after 3906 usecs
[   40.672002] PPS event at 4294902464
[   40.676004] calling  ip_vs_sed_init+0x0/0xf @ 1
[   40.680003] IPVS: [sed] scheduler registered.
[   40.684004] initcall ip_vs_sed_init+0x0/0xf returned 0 after 3906 usecs
[   40.688004] calling  ipip_init+0x0/0x50 @ 1
[   40.692004] IPv4 over IPv4 tunneling driver
[   40.696041] device: 'tunl0': device_add
[   40.700085] PM: Adding info for No Bus:tunl0
[   40.704134] initcall ipip_init+0x0/0x50 returned 0 after 11718 usecs
[   40.708004] calling  ipgre_init+0x0/0x8b @ 1
[   40.716001] GRE over IPv4 tunneling driver
[   40.720022] device: 'gre0': device_add
[   40.723853] PM: Adding info for No Bus:gre0
[   40.728169] initcall ipgre_init+0x0/0x8b returned 0 after 11718 usecs
[   40.732004] calling  ah4_init+0x0/0x5a @ 1
[   40.736006] initcall ah4_init+0x0/0x5a returned 0 after 0 usecs
[   40.744003] calling  esp4_init+0x0/0x5a @ 1
[   40.748004] initcall esp4_init+0x0/0x5a returned 0 after 0 usecs
[   40.752003] calling  tunnel4_init+0x0/0x2c @ 1
[   40.756005] initcall tunnel4_init+0x0/0x2c returned 0 after 0 usecs
[   40.764003] calling  xfrm4_transport_init+0x0/0x14 @ 1
[   40.768004] initcall xfrm4_transport_init+0x0/0x14 returned 0 after 0 usecs
[   40.776003] calling  xfrm4_mode_tunnel_init+0x0/0x14 @ 1
[   40.780004] initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 0 usecs
[   40.788004] calling  ipv4_netfilter_init+0x0/0xf @ 1
[   40.792008] initcall ipv4_netfilter_init+0x0/0xf returned 0 after 0 usecs
[   40.800004] calling  nf_conntrack_l3proto_ipv4_init+0x0/0x11d @ 1
[   40.808039] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x11d returned 0 after 0 usecs
[   40.816004] calling  nf_defrag_init+0x0/0x14 @ 1
[   40.820004] initcall nf_defrag_init+0x0/0x14 returned 0 after 0 usecs
[   40.824003] calling  bictcp_register+0x0/0xf @ 1
[   40.828002] TCP bic registered
[   40.832004] initcall bictcp_register+0x0/0xf returned 0 after 3906 usecs
[   40.840003] calling  tcp_westwood_register+0x0/0xf @ 1
[   40.844002] TCP westwood registered
[   40.848004] initcall tcp_westwood_register+0x0/0xf returned 0 after 3906 usecs
[   40.856003] calling  hybla_register+0x0/0xf @ 1
[   40.860002] TCP hybla registered
[   40.864003] initcall hybla_register+0x0/0xf returned 0 after 3906 usecs
[   40.868002] calling  tcp_vegas_register+0x0/0x11 @ 1
[   40.876002] TCP vegas registered
[   40.879231] initcall tcp_vegas_register+0x0/0x11 returned 0 after 0 usecs
[   40.884003] calling  tcp_lp_register+0x0/0xf @ 1
[   40.888002] TCP lp registered
[   40.892004] initcall tcp_lp_register+0x0/0xf returned 0 after 3906 usecs
[   40.900003] calling  xfrm_user_init+0x0/0x40 @ 1
[   40.904002] Initializing XFRM netlink socket
[   40.908024] initcall xfrm_user_init+0x0/0x40 returned 0 after 3906 usecs
[   40.916003] calling  packet_init+0x0/0x39 @ 1
[   40.920003] NET: Registered protocol family 17
[   40.924009] initcall packet_init+0x0/0x39 returned 0 after 3906 usecs
[   40.928003] calling  ipsec_pfkey_init+0x0/0x6b @ 1
[   40.936009] NET: Registered protocol family 15
[   40.940003] initcall ipsec_pfkey_init+0x0/0x6b returned 0 after 3906 usecs
[   40.944002] calling  br_init+0x0/0xa1 @ 1
[   40.952042] initcall br_init+0x0/0xa1 returned 0 after 3906 usecs
[   40.956003] calling  dsa_init_module+0x0/0x11 @ 1
[   40.960003] initcall dsa_init_module+0x0/0x11 returned 0 after 0 usecs
[   40.968003] calling  edsa_init_module+0x0/0x11 @ 1
[   40.972003] initcall edsa_init_module+0x0/0x11 returned 0 after 0 usecs
[   40.980003] calling  trailer_init_module+0x0/0x11 @ 1
[   40.984003] initcall trailer_init_module+0x0/0x11 returned 0 after 0 usecs
[   40.992003] calling  mv88e6060_init+0x0/0x11 @ 1
[   40.996003] initcall mv88e6060_init+0x0/0x11 returned 0 after 0 usecs
[   41.000003] calling  mv88e6123_61_65_init+0x0/0x11 @ 1
[   41.008008] initcall mv88e6123_61_65_init+0x0/0x11 returned 0 after 0 usecs
[   41.012003] calling  mv88e6131_init+0x0/0x11 @ 1
[   41.020003] initcall mv88e6131_init+0x0/0x11 returned 0 after 0 usecs
[   41.024003] calling  dsa_init_module+0x0/0xf @ 1
[   41.028009] bus: 'platform': add driver dsa
[   41.032084] initcall dsa_init_module+0x0/0xf returned 0 after 3906 usecs
[   41.040003] calling  ipx_init+0x0/0xcd @ 1
[   41.044195] NET: Registered protocol family 4
[   41.056026] initcall ipx_init+0x0/0xcd returned 0 after 11718 usecs
[   41.060003] calling  x25_init+0x0/0x7d @ 1
[   41.064002] NET: Registered protocol family 9
[   41.068003] X.25 for Linux Version 0.2
[   41.072020] initcall x25_init+0x0/0x7d returned 0 after 7812 usecs
[   41.080003] calling  lapb_init+0x0/0x7 @ 1
[   41.084003] initcall lapb_init+0x0/0x7 returned 0 after 0 usecs
[   41.088003] calling  l2cap_init+0x0/0xfb @ 1
[   41.092058] Bluetooth: L2CAP ver 2.14
[   41.096004] Bluetooth: L2CAP socket layer initialized
[   41.100005] initcall l2cap_init+0x0/0xfb returned 0 after 7812 usecs
[   41.104003] calling  sco_init+0x0/0xd8 @ 1
[   41.108011] Bluetooth: SCO (Voice Link) ver 0.6
[   41.112002] Bluetooth: SCO socket layer initialized
[   41.116003] initcall sco_init+0x0/0xd8 returned 0 after 7812 usecs
[   41.120003] calling  rfcomm_init+0x0/0xca @ 1
[   41.124113] Bluetooth: RFCOMM TTY layer initialized
[   41.128008] Bluetooth: RFCOMM socket layer initialized
[   41.136002] Bluetooth: RFCOMM ver 1.11
[   41.140004] initcall rfcomm_init+0x0/0xca returned 0 after 15625 usecs
[   41.144003] calling  bnep_init+0x0/0x78 @ 1
[   41.148002] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   41.156002] Bluetooth: BNEP filters: multicast
[   41.160003] initcall bnep_init+0x0/0x78 returned 0 after 11718 usecs
[   41.164002] calling  hidp_init+0x0/0x4d @ 1
[   41.168002] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   41.176005] bus: 'hid': add driver generic-bluetooth
[   41.180074] initcall hidp_init+0x0/0x4d returned 0 after 11718 usecs
[   41.188003] calling  af_rxrpc_init+0x0/0x167 @ 1
[   41.192164] NET: Registered protocol family 33
[   41.196016] initcall af_rxrpc_init+0x0/0x167 returned 0 after 3906 usecs
[   41.204003] calling  atm_clip_init+0x0/0x9a @ 1
[   41.208192] initcall atm_clip_init+0x0/0x9a returned 0 after 0 usecs
[   41.212003] calling  lane_module_init+0x0/0x5a @ 1
[   41.220007] lec:lane_module_init: lec.c: Jun 11 2010 12:25:33 initialized
[   41.224003] initcall lane_module_init+0x0/0x5a returned 0 after 3906 usecs
[   41.232003] calling  atm_mpoa_init+0x0/0x3a @ 1
[   41.236007] mpoa:atm_mpoa_init: mpc.c: Jun 11 2010 12:25:29 initialized
[   41.244003] initcall atm_mpoa_init+0x0/0x3a returned 0 after 7812 usecs
[   41.252003] calling  l2tp_init+0x0/0x2c @ 1
[   41.256014] L2TP core driver, V2.0
[   41.259414] initcall l2tp_init+0x0/0x2c returned 0 after 0 usecs
[   41.264003] calling  l2tp_ip_init+0x0/0x56 @ 1
[   41.268001] L2TP IP encapsulation support (L2TPv3)
[   41.272164] initcall l2tp_ip_init+0x0/0x56 returned 0 after 3906 usecs
[   41.280005] calling  l2tp_nl_init+0x0/0x23 @ 1
[   41.284001] L2TP netlink interface
[   41.288048] initcall l2tp_nl_init+0x0/0x23 returned 0 after 3906 usecs
[   41.292003] calling  econet_proto_init+0x0/0x1a4 @ 1
[   41.300002] NET: Registered protocol family 19
[   41.304036] initcall econet_proto_init+0x0/0x1a4 returned 0 after 3906 usecs
[   41.312005] calling  phonet_init+0x0/0x70 @ 1
[   41.316021] NET: Registered protocol family 35
[   41.320157] initcall phonet_init+0x0/0x70 returned 0 after 3906 usecs
[   41.324003] calling  pep_register+0x0/0x14 @ 1
[   41.332155] initcall pep_register+0x0/0x14 returned 0 after 0 usecs
[   41.336003] calling  vlan_proto_init+0x0/0x9d @ 1
[   41.340002] 802.1Q VLAN Support v1.8 Ben Greear <greearb-my8/4N5VtI7c+919tysfdA@public.gmane.org>
[   41.348002] All bugs added by David S. Miller <davem-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
[   41.356018] initcall vlan_proto_init+0x0/0x9d returned 0 after 15625 usecs
[   41.360003] calling  dccp_init+0x0/0x304 @ 1
[   41.370716] CCID: Activated CCID 2 (TCP-like)
[   41.372312] CCID: Activated CCID 3 (TCP-Friendly Rate Control)
[   41.380007] initcall dccp_init+0x0/0x304 returned 0 after 15625 usecs
[   41.384003] calling  dccp_v4_init+0x0/0x72 @ 1
[   41.392485] initcall dccp_v4_init+0x0/0x72 returned 0 after 0 usecs
[   41.396008] calling  sctp_init+0x0/0x706 @ 1
[   41.404902] SCTP: Hash tables configured (established 43690 bind 52428)
[   41.408290] initcall sctp_init+0x0/0x706 returned 0 after 7812 usecs
[   41.416011] calling  rds_init+0x0/0xa6 @ 1
[   41.420186] rds_page_remainder_cpu_notify(): cpu 0 action 0x7
[   41.428004] rds_page_remainder_cpu_notify(): cpu 1 action 0x7
[   41.432004] initcall rds_init+0x0/0xa6 returned -12 after 11718 usecs
[   41.440003] initcall rds_init+0x0/0xa6 returned with error code -12 
[   41.444003] calling  rds_rdma_init+0x0/0xf7 @ 1
[   41.448031] rds_rdma_listen_init(): cm 7dc2a9e0 listening on port 18634
[   41.456031] rds_rdma_listen_stop(): cm 7dc2a9e0
[   41.460011] initcall rds_rdma_init+0x0/0xf7 returned -12 after 11718 usecs
[   41.468003] initcall rds_rdma_init+0x0/0xf7 returned with error code -12 
[   41.476003] calling  lib80211_init+0x0/0x19 @ 1
[   41.480002] lib80211: common routines for IEEE802.11 drivers
[   41.484003] lib80211_crypt: registered algorithm 'NULL'
[   41.488003] initcall lib80211_init+0x0/0x19 returned 0 after 7812 usecs
[   41.496003] calling  caif_device_init+0x0/0x6b @ 1
[   41.500027] initcall caif_device_init+0x0/0x6b returned 0 after 0 usecs
[   41.508012] calling  chnl_init_module+0x0/0xf @ 1
[   41.512004] initcall chnl_init_module+0x0/0xf returned 0 after 0 usecs
[   41.520005] calling  caif_sktinit_module+0x0/0x132 @ 1
[   41.524082] NET: Registered protocol family 37
[   41.528004] initcall caif_sktinit_module+0x0/0x132 returned 0 after 3906 usecs
[   41.536003] calling  dcbnl_init+0x0/0x2d @ 1
[   41.540004] initcall dcbnl_init+0x0/0x2d returned 0 after 0 usecs
[   41.548003] calling  af_ieee802154_init+0x0/0x63 @ 1
[   41.552305] NET: Registered protocol family 36
[   41.556009] initcall af_ieee802154_init+0x0/0x63 returned 0 after 3906 usecs
[   41.564003] calling  wimax_subsys_init+0x0/0x2be @ 1
[   41.568089] initcall wimax_subsys_init+0x0/0x2be returned 0 after 0 usecs
[   41.576005] calling  mcheck_debugfs_init+0x0/0x35 @ 1
[   41.580022] initcall mcheck_debugfs_init+0x0/0x35 returned 0 after 0 usecs
[   41.588004] calling  severities_debugfs_init+0x0/0x35 @ 1
[   41.592017] initcall severities_debugfs_init+0x0/0x35 returned 0 after 0 usecs
[   41.600004] calling  powernow_init+0x0/0xcf @ 1
[   41.604004] initcall powernow_init+0x0/0xcf returned -19 after 0 usecs
[   41.612003] calling  centrino_init+0x0/0x26 @ 1
[   41.616004] initcall centrino_init+0x0/0x26 returned -19 after 0 usecs
[   41.620003] calling  cpufreq_p4_init+0x0/0x4f @ 1
[   41.628005] initcall cpufreq_p4_init+0x0/0x4f returned -19 after 0 usecs
[   41.632003] calling  update_mp_table+0x0/0x542 @ 1
[   41.640004] initcall update_mp_table+0x0/0x542 returned 0 after 0 usecs
[   41.644004] calling  lapic_insert_resource+0x0/0x35 @ 1
[   41.648006] initcall lapic_insert_resource+0x0/0x35 returned 0 after 0 usecs
[   41.656004] calling  print_ipi_mode+0x0/0x26 @ 1
[   41.660002] Using IPI No-Shortcut mode
[   41.664003] initcall print_ipi_mode+0x0/0x26 returned 0 after 3906 usecs
[   41.672003] PPS event at 4294902714
[   41.676007] calling  init_lapic_nmi_sysfs+0x0/0x33 @ 1
[   41.680003] initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 0 usecs
[   41.688003] calling  io_apic_bug_finalize+0x0/0x1a @ 1
[   41.692003] initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 0 usecs
[   41.700004] calling  check_early_ioremap_leak+0x0/0x45 @ 1
[   41.704004] initcall check_early_ioremap_leak+0x0/0x45 returned 0 after 0 usecs
[   41.712003] calling  pat_memtype_list_init+0x0/0x2e @ 1
[   41.716015] initcall pat_memtype_list_init+0x0/0x2e returned 0 after 0 usecs
[   41.720003] calling  sched_init_debug+0x0/0x1f @ 1
[   41.724020] initcall sched_init_debug+0x0/0x1f returned 0 after 0 usecs
[   41.728005] calling  init_oops_id+0x0/0x3a @ 1
[   41.732008] initcall init_oops_id+0x0/0x3a returned 0 after 0 usecs
[   41.736004] calling  disable_boot_consoles+0x0/0x3a @ 1
[   41.740003] initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 usecs
[   41.744003] calling  pm_qos_power_init+0x0/0xae @ 1
[   41.748011] device: 'cpu_dma_latency': device_add
[   41.752214] PM: Adding info for No Bus:cpu_dma_latency
[   41.756065] device: 'network_latency': device_add
[   41.760080] PM: Adding info for No Bus:network_latency
[   41.764056] device: 'network_throughput': device_add
[   41.768076] PM: Adding info for No Bus:network_throughput
[   41.772055] initcall pm_qos_power_init+0x0/0xae returned 0 after 23437 usecs
[   41.776004] calling  software_resume+0x0/0x1da @ 1
[   41.780004] PM: Resume from disk failed.
[   41.784004] initcall software_resume+0x0/0x1da returned -2 after 3906 usecs
[   41.788003] initcall software_resume+0x0/0x1da returned with error code -2 
[   41.792004] calling  taskstats_init+0x0/0x7d @ 1
[   41.796046] registered taskstats version 1
[   41.800004] initcall taskstats_init+0x0/0x7d returned 0 after 3906 usecs
[   41.804003] calling  clear_boot_tracer+0x0/0x27 @ 1
[   41.808007] initcall clear_boot_tracer+0x0/0x27 returned 0 after 0 usecs
[   41.812004] calling  event_trace_self_tests_init+0x0/0x20d @ 1
[   41.816004] Running tests on trace events:
[   41.820003] Testing event kfree_skb: OK
[   41.840561] Testing event skb_copy_datagram_iovec: OK
[   41.860549] Testing event scsi_dispatch_cmd_start: OK
[   41.880561] Testing event scsi_dispatch_cmd_error: OK
[   41.900557] Testing event scsi_dispatch_cmd_done: OK
[   41.920543] Testing event scsi_dispatch_cmd_timeout: OK
[   41.940546] Testing event scsi_eh_wakeup: OK
[   41.960548] Testing event lock_kernel: OK
[   41.980563] Testing event unlock_kernel: OK
[   42.000559] Testing event block_rq_abort: OK
[   42.020543] Testing event block_rq_requeue: OK
[   42.040561] Testing event block_rq_complete: OK
[   42.060554] Testing event block_rq_insert: OK
[   42.080557] Testing event block_rq_issue: OK
[   42.100560] Testing event block_bio_bounce: OK
[   42.120558] Testing event block_bio_complete: OK
[   42.140553] Testing event block_bio_backmerge: OK
[   42.160548] Testing event block_bio_frontmerge: OK
[   42.180564] Testing event block_bio_queue: OK
[   42.200556] Testing event block_getrq: OK
[   42.220544] Testing event block_sleeprq: OK
[   42.240556] Testing event block_plug: OK
[   42.260555] Testing event block_unplug_timer: OK
[   42.280539] Testing event block_unplug_io: OK
[   42.300541] Testing event block_split: OK
[   42.320557] Testing event block_remap: OK
[   42.340560] Testing event block_rq_remap: OK
[   42.360563] Testing event gfs2_glock_state_change: OK
[   42.380556] Testing event gfs2_glock_put: OK
[   42.400556] Testing event gfs2_demote_rq: OK
[   42.420560] Testing event gfs2_promote: OK
[   42.440545] Testing event gfs2_glock_queue: OK
[   42.460545] Testing event gfs2_pin: OK
[   42.480547] Testing event gfs2_log_flush: OK
[   42.500540] Testing event gfs2_log_blocks: OK
[   42.520563] Testing event gfs2_bmap: OK
[   42.540558] Testing event gfs2_block_alloc: OK
[   42.560562] Testing event xfs_attr_list_sf: OK
[   42.580557] Testing event xfs_attr_list_sf_all: OK
[   42.600541] Testing event xfs_attr_list_leaf: OK
[   42.620565] Testing event xfs_attr_list_leaf_end: OK
[   42.640559] Testing event xfs_attr_list_full: OK
[   42.660546] Testing event xfs_attr_list_add: 
[   42.676002] PPS event at 4294902965
[   42.680195] OK
[   42.681858] Testing event xfs_attr_list_wrong_blk: OK
[   42.700558] Testing event xfs_attr_list_notfound: OK
[   42.720555] Testing event xfs_perag_get: OK
[   42.740561] Testing event xfs_perag_put: OK
[   42.760561] Testing event xfs_attr_list_node_descend: OK
[   42.780555] Testing event xfs_iext_insert: OK
[   42.800549] Testing event xfs_iext_remove: OK
[   42.820556] Testing event xfs_bmap_pre_update: OK
[   42.840558] Testing event xfs_bmap_post_update: OK
[   42.860543] Testing event xfs_extlist: OK
[   42.880559] Testing event xfs_buf_init: OK
[   42.900556] Testing event xfs_buf_free: OK
[   42.920549] Testing event xfs_buf_hold: OK
[   42.940557] Testing event xfs_buf_rele: OK
[   42.960558] Testing event xfs_buf_pin: OK
[   42.980545] Testing event xfs_buf_unpin: OK
[   43.000561] Testing event xfs_buf_iodone: OK
[   43.020556] Testing event xfs_buf_iorequest: OK
[   43.040543] Testing event xfs_buf_bawrite: OK
[   43.060560] Testing event xfs_buf_bdwrite: OK
[   43.080561] Testing event xfs_buf_lock: OK
[   43.100548] Testing event xfs_buf_lock_done: OK
[   43.120561] Testing event xfs_buf_cond_lock: OK
[   43.140559] Testing event xfs_buf_unlock: OK
[   43.160545] Testing event xfs_buf_ordered_retry: OK
[   43.180561] Testing event xfs_buf_iowait: OK
[   43.200563] Testing event xfs_buf_iowait_done: OK
[   43.220564] Testing event xfs_buf_delwri_queue: OK
[   43.240559] Testing event xfs_buf_delwri_dequeue: OK
[   43.260559] Testing event xfs_buf_delwri_split: OK
[   43.280553] Testing event xfs_buf_get_noaddr: OK
[   43.300563] Testing event xfs_bdstrat_shut: OK
[   43.320556] Testing event xfs_buf_item_relse: OK
[   43.340543] Testing event xfs_buf_item_iodone: OK
[   43.360558] Testing event xfs_buf_item_iodone_async: OK
[   43.380559] Testing event xfs_buf_error_relse: OK
[   43.400546] Testing event xfs_trans_read_buf_io: OK
[   43.420560] Testing event xfs_trans_read_buf_shut: OK
[   43.440558] Testing event xfs_btree_corrupt: OK
[   43.460543] Testing event xfs_da_btree_corrupt: OK
[   43.480560] Testing event xfs_reset_dqcounts: OK
[   43.500561] Testing event xfs_inode_item_push: OK
[   43.520548] Testing event xfs_buf_find: OK
[   43.540541] Testing event xfs_buf_get: OK
[   43.560543] Testing event xfs_buf_read: OK
[   43.580557] Testing event xfs_buf_ioerror: OK
[   43.600555] Testing event xfs_buf_item_size: OK
[   43.620547] Testing event xfs_buf_item_size_stale: OK
[   43.640557] Testing event xfs_buf_item_format: OK
[   43.660557] Testing event xfs_buf_item_format_stale: 
[   43.676001] PPS event at 4294903215
[   43.680193] OK
[   43.681856] Testing event xfs_buf_item_pin: OK
[   43.700553] Testing event xfs_buf_item_unpin: OK
[   43.720548] Testing event xfs_buf_item_unpin_stale: OK
[   43.740540] Testing event xfs_buf_item_trylock: OK
[   43.760565] Testing event xfs_buf_item_unlock: OK
[   43.780559] Testing event xfs_buf_item_unlock_stale: OK
[   43.800544] Testing event xfs_buf_item_committed: OK
[   43.820547] Testing event xfs_buf_item_push: OK
[   43.840562] Testing event xfs_buf_item_pushbuf: OK
[   43.860559] Testing event xfs_trans_get_buf: OK
[   43.880543] Testing event xfs_trans_get_buf_recur: OK
[   43.900545] Testing event xfs_trans_getsb: OK
[   43.920545] Testing event xfs_trans_getsb_recur: OK
[   43.940563] Testing event xfs_trans_read_buf: OK
[   43.960557] Testing event xfs_trans_read_buf_recur: OK
[   43.980543] Testing event xfs_trans_log_buf: OK
[   44.000558] Testing event xfs_trans_brelse: OK
[   44.020554] Testing event xfs_trans_bjoin: OK
[   44.040548] Testing event xfs_trans_bhold: OK
[   44.060557] Testing event xfs_trans_bhold_release: OK
[   44.080556] Testing event xfs_trans_binval: OK
[   44.100543] Testing event xfs_ilock: OK
[   44.120547] Testing event xfs_ilock_nowait: OK
[   44.140560] Testing event xfs_ilock_demote: OK
[   44.160558] Testing event xfs_iunlock: OK
[   44.180543] Testing event xfs_iget_skip: OK
[   44.200558] Testing event xfs_iget_reclaim: OK
[   44.220560] Testing event xfs_iget_found: OK
[   44.240538] Testing event xfs_iget_alloc: OK
[   44.260562] Testing event xfs_ihold: OK
[   44.280557] Testing event xfs_irele: OK
[   44.300543] Testing event xfs_inode_pin: OK
[   44.320557] Testing event xfs_inode_unpin: OK
[   44.340555] Testing event xfs_inode_unpin_nowait: OK
[   44.360540] Testing event xfs_inode: OK
[   44.380541] Testing event xfs_dqadjust: OK
[   44.400556] Testing event xfs_dqreclaim_want: OK
[   44.420560] Testing event xfs_dqreclaim_dirty: OK
[   44.440546] Testing event xfs_dqreclaim_unlink: OK
[   44.460560] Testing event xfs_dqattach_found: OK
[   44.480558] Testing event xfs_dqattach_get: OK
[   44.500543] Testing event xfs_dqinit: OK
[   44.520544] Testing event xfs_dqreuse: OK
[   44.540545] Testing event xfs_dqalloc: OK
[   44.560562] Testing event xfs_dqtobp_read: OK
[   44.580555] Testing event xfs_dqread: OK
[   44.600541] Testing event xfs_dqread_fail: OK
[   44.620557] Testing event xfs_dqlookup_found: OK
[   44.640555] Testing event xfs_dqlookup_want: OK
[   44.660548] Testing event xfs_dqlookup_freelist: 
[   44.676001] PPS event at 4294903465
[   44.680180] OK
[   44.681848] Testing event xfs_dqlookup_done: OK
[   44.700541] Testing event xfs_dqget_hit: OK
[   44.720543] Testing event xfs_dqget_miss: OK
[   44.740560] Testing event xfs_dqput: OK
[   44.760554] Testing event xfs_dqput_wait: OK
[   44.780539] Testing event xfs_dqput_free: OK
[   44.800541] Testing event xfs_dqrele: OK
[   44.820564] Testing event xfs_dqflush: OK
[   44.840555] Testing event xfs_dqflush_force: OK
[   44.860547] Testing event xfs_dqflush_done: OK
[   44.880564] Testing event xfs_dquot_dqalloc: OK
[   44.900556] Testing event xfs_dquot_dqdetach: OK
[   44.920544] Testing event xfs_log_done_nonperm: OK
[   44.940545] Testing event xfs_log_done_perm: OK
[   44.960547] Testing event xfs_log_reserve: OK
[   44.980540] Testing event xfs_log_umount_write: OK
[   45.000541] Testing event xfs_log_grant_enter: OK
[   45.020544] Testing event xfs_log_grant_exit: OK
[   45.040546] Testing event xfs_log_grant_error: OK
[   45.060546] Testing event xfs_log_grant_sleep1: OK
[   45.080540] Testing event xfs_log_grant_wake1: OK
[   45.100541] Testing event xfs_log_grant_sleep2: OK
[   45.120564] Testing event xfs_log_grant_wake2: OK
[   45.140561] Testing event xfs_log_regrant_write_enter: OK
[   45.160546] Testing event xfs_log_regrant_write_exit: OK
[   45.180549] Testing event xfs_log_regrant_write_error: OK
[   45.200563] Testing event xfs_log_regrant_write_sleep1: OK
[   45.220557] Testing event xfs_log_regrant_write_wake1: OK
[   45.240544] Testing event xfs_log_regrant_write_sleep2: OK
[   45.260546] Testing event xfs_log_regrant_write_wake2: OK
[   45.280547] Testing event xfs_log_regrant_reserve_enter: OK
[   45.300561] Testing event xfs_log_regrant_reserve_exit: OK
[   45.320558] Testing event xfs_log_regrant_reserve_sub: OK
[   45.340543] Testing event xfs_log_ungrant_enter: OK
[   45.360545] Testing event xfs_log_ungrant_exit: OK
[   45.380546] Testing event xfs_log_ungrant_sub: OK
[   45.400563] Testing event xfs_file_read: OK
[   45.420556] Testing event xfs_file_buffered_write: OK
[   45.440543] Testing event xfs_file_direct_write: OK
[   45.460566] Testing event xfs_file_splice_read: OK
[   45.480556] Testing event xfs_file_splice_write: OK
[   45.500548] Testing event xfs_writepage: OK
[   45.520564] Testing event xfs_releasepage: OK
[   45.540556] Testing event xfs_invalidatepage: OK
[   45.560560] Testing event xfs_iomap_enter: OK
[   45.580554] Testing event xfs_iomap_found: OK
[   45.600548] Testing event xfs_iomap_alloc: OK
[   45.620540] Testing event xfs_delalloc_enospc: OK
[   45.640540] Testing event xfs_unwritten_convert: OK
[   45.660557] Testing event xfs_itruncate_start: 
[   45.676002] PPS event at 4294903715
[   45.680189] OK
[   45.681859] Testing event xfs_itruncate_finish_start: OK
[   45.700549] Testing event xfs_itruncate_finish_end: OK
[   45.720550] Testing event xfs_pagecache_inval: OK
[   45.740542] Testing event xfs_bunmap: OK
[   45.760558] Testing event xfs_alloc_busy: OK
[   45.780554] Testing event xfs_alloc_unbusy: OK
[   45.800548] Testing event xfs_alloc_busysearch: OK
[   45.820564] Testing event xfs_trans_commit_lsn: OK
[   45.840557] Testing event xfs_agf: OK
[   45.860543] Testing event xfs_free_extent: OK
[   45.880545] Testing event xfs_alloc_exact_done: OK
[   45.900560] Testing event xfs_alloc_exact_error: OK
[   45.920558] Testing event xfs_alloc_near_nominleft: OK
[   45.940541] Testing event xfs_alloc_near_first: OK
[   45.960558] Testing event xfs_alloc_near_greater: OK
[   45.980561] Testing event xfs_alloc_near_lesser: OK
[   46.000547] Testing event xfs_alloc_near_error: OK
[   46.020560] Testing event xfs_alloc_size_neither: OK
[   46.040558] Testing event xfs_alloc_size_noentry: OK
[   46.060542] Testing event xfs_alloc_size_nominleft: OK
[   46.080559] Testing event xfs_alloc_size_done: OK
[   46.100561] Testing event xfs_alloc_size_error: OK
[   46.120548] Testing event xfs_alloc_small_freelist: OK
[   46.140542] Testing event xfs_alloc_small_notenough: OK
[   46.160542] Testing event xfs_alloc_small_done: OK
[   46.180545] Testing event xfs_alloc_small_error: OK
[   46.200545] Testing event xfs_alloc_vextent_badargs: OK
[   46.220540] Testing event xfs_alloc_vextent_nofix: OK
[   46.240541] Testing event xfs_alloc_vextent_noagbp: OK
[   46.260543] Testing event xfs_alloc_vextent_loopfailed: OK
[   46.280544] Testing event xfs_alloc_vextent_allfailed: OK
[   46.300547] Testing event xfs_dir2_sf_addname: OK
[   46.320547] Testing event xfs_dir2_sf_create: OK
[   46.340540] Testing event xfs_dir2_sf_lookup: OK
[   46.360565] Testing event xfs_dir2_sf_replace: OK
[   46.380560] Testing event xfs_dir2_sf_removename: OK
[   46.400545] Testing event xfs_dir2_sf_toino4: OK
[   46.420546] Testing event xfs_dir2_sf_toino8: OK
[   46.440561] Testing event xfs_dir2_sf_to_block: OK
[   46.460556] Testing event xfs_dir2_block_addname: OK
[   46.480543] Testing event xfs_dir2_block_lookup: OK
[   46.500546] Testing event xfs_dir2_block_replace: OK
[   46.520546] Testing event xfs_dir2_block_removename: OK
[   46.540539] Testing event xfs_dir2_block_to_sf: OK
[   46.560541] Testing event xfs_dir2_block_to_leaf: OK
[   46.580543] Testing event xfs_dir2_leaf_addname: OK
[   46.600545] Testing event xfs_dir2_leaf_lookup: OK
[   46.620546] Testing event xfs_dir2_leaf_replace: OK
[   46.640547] Testing event xfs_dir2_leaf_removename: OK
[   46.660540] Testing event xfs_dir2_leaf_to_block: 
[   46.676001] PPS event at 4294903965
[   46.680193] OK
[   46.681863] Testing event xfs_dir2_leaf_to_node: OK
[   46.700561] Testing event xfs_dir2_node_addname: OK
[   46.720546] Testing event xfs_dir2_node_lookup: OK
[   46.740548] Testing event xfs_dir2_node_replace: OK
[   46.760563] Testing event xfs_dir2_node_removename: OK
[   46.780556] Testing event xfs_dir2_node_to_leaf: OK
[   46.800544] Testing event xfs_dir2_leafn_add: OK
[   46.820557] Testing event xfs_dir2_leafn_remove: OK
[   46.840555] Testing event xfs_dir2_grow_inode: OK
[   46.860549] Testing event xfs_dir2_shrink_inode: OK
[   46.880557] Testing event xfs_dir2_leafn_moveents: OK
[   46.900558] Testing event xfs_swap_extent_before: OK
[   46.920545] Testing event xfs_swap_extent_after: OK
[   46.940546] Testing event xfs_log_recover_item_add: OK
[   46.960540] Testing event xfs_log_recover_item_add_cont: OK
[   46.980542] Testing event xfs_log_recover_item_reorder_head: OK
[   47.000556] Testing event xfs_log_recover_item_reorder_tail: OK
[   47.020553] Testing event xfs_log_recover_item_recover: OK
[   47.040548] Testing event xfs_log_recover_buf_not_cancel: OK
[   47.060548] Testing event xfs_log_recover_buf_cancel: OK
[   47.080540] Testing event xfs_log_recover_buf_cancel_add: OK
[   47.100542] Testing event xfs_log_recover_buf_cancel_ref_inc: OK
[   47.120559] Testing event xfs_log_recover_buf_recover: OK
[   47.140552] Testing event xfs_log_recover_buf_inode_buf: OK
[   47.160548] Testing event xfs_log_recover_buf_reg_buf: OK
[   47.180542] Testing event xfs_log_recover_buf_dquot_buf: OK
[   47.200565] Testing event xfs_log_recover_inode_recover: OK
[   47.220554] Testing event xfs_log_recover_inode_cancel: OK
[   47.240547] Testing event xfs_log_recover_inode_skip: OK
[   47.260548] Testing event jbd2_checkpoint: OK
[   47.280562] Testing event jbd2_start_commit: OK
[   47.300556] Testing event jbd2_commit_locking: OK
[   47.320543] Testing event jbd2_commit_flushing: OK
[   47.340546] Testing event jbd2_commit_logging: OK
[   47.360548] Testing event jbd2_end_commit: OK
[   47.380540] Testing event jbd2_submit_inode_data: OK
[   47.400541] Testing event jbd2_run_stats: OK
[   47.420544] Testing event jbd2_checkpoint_stats: OK
[   47.440545] Testing event jbd2_cleanup_journal_tail: OK
[   47.460548] Testing event ext4_free_inode: OK
[   47.480540] Testing event ext4_request_inode: OK
[   47.500563] Testing event ext4_allocate_inode: OK
[   47.520559] Testing event ext4_write_begin: OK
[   47.540546] Testing event ext4_da_write_begin: OK
[   47.560548] Testing event ext4_ordered_write_end: OK
[   47.580547] Testing event ext4_writeback_write_end: OK
[   47.600540] Testing event ext4_journalled_write_end: OK
[   47.620542] Testing event ext4_da_write_end: OK
[   47.640559] Testing event ext4_writepage: OK
[   47.660561] Testing event ext4_da_writepages: 
[   47.676001] PPS event at 4294904215
[   47.680178] OK
[   47.681846] Testing event ext4_da_write_pages: OK
[   47.700541] Testing event ext4_da_writepages_result: OK
[   47.720543] Testing event ext4_discard_blocks: OK
[   47.740545] Testing event ext4_mb_new_inode_pa: OK
[   47.760560] Testing event ext4_mb_new_group_pa: OK
[   47.780555] Testing event ext4_mb_release_inode_pa: OK
[   47.800541] Testing event ext4_mb_release_group_pa: OK
[   47.820556] Testing event ext4_discard_preallocations: OK
[   47.840559] Testing event ext4_mb_discard_preallocations: OK
[   47.860544] Testing event ext4_request_blocks: OK
[   47.880547] Testing event ext4_allocate_blocks: OK
[   47.900541] Testing event ext4_free_blocks: OK
[   47.920543] Testing event ext4_sync_file: OK
[   47.940543] Testing event ext4_sync_fs: OK
[   47.960560] Testing event ext4_alloc_da_blocks: OK
[   47.980554] Testing event ext4_mballoc_alloc: OK
[   48.000541] Testing event ext4_mballoc_prealloc: OK
[   48.020541] Testing event ext4_mballoc_discard: OK
[   48.040541] Testing event ext4_mballoc_free: OK
[   48.060544] Testing event ext4_forget: OK
[   48.080546] Testing event ext4_da_update_reserve_space: OK
[   48.100563] Testing event ext4_da_reserve_space: OK
[   48.120557] Testing event ext4_da_release_space: OK
[   48.140542] Testing event ext4_mb_bitmap_load: OK
[   48.160557] Testing event ext4_mb_buddy_bitmap_load: OK
[   48.180572] Testing event kmalloc: OK
[   48.200540] Testing event kmem_cache_alloc: OK
[   48.220541] Testing event kmalloc_node: OK
[   48.240555] Testing event kmem_cache_alloc_node: OK
[   48.260560] Testing event kfree: OK
[   48.280545] Testing event kmem_cache_free: OK
[   48.300559] Testing event mm_page_free_direct: OK
[   48.320556] Testing event mm_pagevec_free: OK
[   48.340543] Testing event mm_page_alloc: OK
[   48.360544] Testing event mm_page_alloc_zone_locked: OK
[   48.380559] Testing event mm_page_pcpu_drain: OK
[   48.400554] Testing event mm_page_alloc_extfrag: OK
[   48.420541] Testing event power_start: OK
[   48.440563] Testing event power_frequency: OK
[   48.460551] Testing event power_end: OK
[   48.480553] Testing event workqueue_insertion: OK
[   48.500539] Testing event workqueue_execution: OK
[   48.520563] Testing event workqueue_creation: OK
[   48.540556] Testing event workqueue_destruction: OK
[   48.560563] Testing event signal_generate: OK
[   48.580561] Testing event signal_deliver: OK
[   48.600561] Testing event signal_overflow_fail: OK
[   48.620556] Testing event signal_lose_info: OK
[   48.640543] Testing event timer_init: OK
[   48.660543] Testing event timer_start: 
[   48.676001] PPS event at 4294904465
[   48.680193] OK
[   48.681858] Testing event timer_expire_entry: OK
[   48.700551] Testing event timer_expire_exit: OK
[   48.720560] Testing event timer_cancel: OK
[   48.740557] Testing event hrtimer_init: OK
[   48.760559] Testing event hrtimer_start: OK
[   48.780554] Testing event hrtimer_expire_entry: OK
[   48.800546] Testing event hrtimer_expire_exit: OK
[   48.820562] Testing event hrtimer_cancel: OK
[   48.840556] Testing event itimer_state: OK
[   48.860541] Testing event itimer_expire: OK
[   48.880558] Testing event irq_handler_entry: OK
[   48.900554] Testing event irq_handler_exit: OK
[   48.920546] Testing event softirq_entry: OK
[   48.940539] Testing event softirq_exit: OK
[   48.960566] Testing event sched_kthread_stop: OK
[   48.980559] Testing event sched_kthread_stop_ret: OK
[   49.000560] Testing event sched_wait_task: OK
[   49.020556] Testing event sched_wakeup: OK
[   49.040539] Testing event sched_wakeup_new: OK
[   49.060556] Testing event sched_switch: OK
[   49.080557] Testing event sched_migrate_task: OK
[   49.100559] Testing event sched_process_free: OK
[   49.120554] Testing event sched_process_exit: OK
[   49.140539] Testing event sched_process_wait: OK
[   49.160556] Testing event sched_process_fork: OK
[   49.180557] Testing event sched_stat_wait: OK
[   49.200559] Testing event sched_stat_sleep: OK
[   49.220554] Testing event sched_stat_iowait: OK
[   49.240539] Testing event sched_stat_runtime: OK
[   49.260556] Testing event mce_record: OK
[   49.280558] Testing event sys_enter: OK
[   49.300561] Testing event sys_exit: OK
[   49.320554] Running tests on trace event systems:
[   49.324003] Testing event system skb: OK
[   49.344660] Testing event system scsi: OK
[   49.364793] Testing event system bkl: OK
[   49.384642] Testing event system block: OK
[   49.405423] Testing event system gfs2: OK
[   49.425026] Testing event system xfs: OK
[   49.484002] Testing event system jbd2: OK
[   49.505031] Testing event system ext4: OK
[   49.526411] Testing event system kmem: OK
[   49.545121] Testing event system power: OK
[   49.564722] Testing event system workqueue: OK
[   49.584740] Testing event system signal: OK
[   49.604738] Testing event system timer: OK
[   49.625119] Testing event system irq: OK
[   49.644739] Testing event system sched: OK
[   49.665269] Testing event system syscalls: 
[   49.676032] PPS event at 4294904715
[   49.684511] OK
[   49.686174] Testing event system mce: OK
[   49.704607] Testing event system raw_syscalls: OK
[   49.724661] Running tests on all trace events:
[   49.728002] Testing all events: OK
[   49.816756] initcall event_trace_self_tests_init+0x0/0x20d returned 0 after 7812500 usecs
[   49.824006] calling  fail_page_alloc_debugfs+0x0/0xc1 @ 1
[   49.828105] initcall fail_page_alloc_debugfs+0x0/0xc1 returned 0 after 0 usecs
[   49.836003] calling  max_swapfiles_check+0x0/0x7 @ 1
[   49.840003] initcall max_swapfiles_check+0x0/0x7 returned 0 after 0 usecs
[   49.848003] calling  failslab_debugfs_init+0x0/0x8c @ 1
[   49.852098] initcall failslab_debugfs_init+0x0/0x8c returned 0 after 0 usecs
[   49.860238] calling  init_ima+0x0/0x14 @ 1
[   49.864060] IMA: No TPM chip found, activating TPM-bypass!
[   49.868046] initcall init_ima+0x0/0x14 returned 0 after 3906 usecs
[   49.876009] calling  fail_make_request_debugfs+0x0/0x14 @ 1
[   49.880081] initcall fail_make_request_debugfs+0x0/0x14 returned 0 after 0 usecs
[   49.888003] calling  fail_io_timeout_debugfs+0x0/0x14 @ 1
[   49.896071] initcall fail_io_timeout_debugfs+0x0/0x14 returned 0 after 0 usecs
[   49.900005] calling  random32_reseed+0x0/0x9d @ 1
[   49.908018] initcall random32_reseed+0x0/0x9d returned 0 after 0 usecs
[   49.912003] calling  pci_resource_alignment_sysfs_init+0x0/0x14 @ 1
[   49.920015] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 0 usecs
[   49.928003] calling  pci_sysfs_init+0x0/0x44 @ 1
[   49.932725] initcall pci_sysfs_init+0x0/0x44 returned 0 after 0 usecs
[   49.940004] calling  regulator_init_complete+0x0/0xf6 @ 1
[   49.944004] initcall regulator_init_complete+0x0/0xf6 returned 0 after 0 usecs
[   49.952003] calling  seqgen_init+0x0/0xe @ 1
[   49.956020] initcall seqgen_init+0x0/0xe returned 0 after 0 usecs
[   49.964006] calling  late_resume_init+0x0/0x10d @ 1
[   49.968002]   Magic number: 14:428:449
[   49.972448] initcall late_resume_init+0x0/0x10d returned 0 after 3906 usecs
[   49.980005] calling  hd_init+0x0/0x28c @ 1
[   49.984065] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[   49.992036] initcall hd_init+0x0/0x28c returned -1 after 7812 usecs
[   49.996003] initcall hd_init+0x0/0x28c returned with error code -1 
[   50.004004] calling  scsi_complete_async_scans+0x0/0x123 @ 1
[   50.008003] initcall scsi_complete_async_scans+0x0/0x123 returned 0 after 0 usecs
[   50.016003] calling  rtc_hctosys+0x0/0x13e @ 1
[   50.020019] rtc-test rtc-test.0: setting system clock to 2010-06-11 21:25:29 UTC (1276291529)
[   50.028010] initcall rtc_hctosys+0x0/0x13e returned 0 after 7812 usecs
[   50.036003] calling  edd_init+0x0/0x2d5 @ 1
[   50.040003] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[   50.044096] initcall edd_init+0x0/0x2d5 returned 0 after 3906 usecs
[   50.052005] calling  tcp_congestion_default+0x0/0xf @ 1
[   50.056005] initcall tcp_congestion_default+0x0/0xf returned 0 after 0 usecs
[   50.064004] calling  ip_auto_config+0x0/0xd2b @ 1
[   50.068015] initcall ip_auto_config+0x0/0xd2b returned 0 after 0 usecs
[   50.076003] calling  initialize_hashrnd+0x0/0x16 @ 1
[   50.080008] initcall initialize_hashrnd+0x0/0x16 returned 0 after 0 usecs
[   50.088231] async_waiting @ 1
[   50.092003] async_continuing @ 1 after 0 usec
[   50.096076] md: Waiting for all devices to be available before autodetect
[   50.100002] md: If you don't use raid, use raid=noautodetect
[   50.108002] async_waiting @ 1
[   50.112002] async_continuing @ 1 after 0 usec
[   50.116070] device: 'md0': device_add
[   50.120064] PM: Adding info for No Bus:md0
[   50.124140] device: '9:0': device_add
[   50.128024] PM: Adding info for No Bus:9:0
[   50.132129] md: Autodetecting RAID arrays.
[   50.136003] md: Scanned 0 and added 0 devices.
[   50.140001] md: autorun ...
[   50.142814] md: ... autorun DONE.
[   50.160050] EXT3-fs (sda1): recovery required on readonly filesystem
[   50.164197] EXT3-fs (sda1): write access will be enabled during recovery
[   50.176074] EXT3-fs: barriers not enabled
[   50.208072] kjournald starting.  Commit interval 5 seconds
[   50.208072] EXT3-fs (sda1): recovery complete
[   50.216034] EXT3-fs (sda1): mounted filesystem with writeback data mode
[   50.224272] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[   50.228085] async_waiting @ 1
[   50.232002] async_continuing @ 1 after 0 usec
[   50.236002] debug: unmapping init memory 422d1000..42375000
[   50.280105] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
[   50.676005] PPS event at 4294904965
[   51.676006] PPS event at 4294905215
[   52.676005] PPS event at 4294905465
[   53.276311] md: Autodetecting RAID arrays.
[   53.280003] md: Scanned 0 and added 0 devices.
[   53.288004] md: autorun ...
[   53.290832] md: ... autorun DONE.
[   53.676005] PPS event at 4294905715
[   54.084345] device: 'md1': device_add
[   54.088083] PM: Adding info for No Bus:md1
[   54.092138] device: '9:1': device_add
[   54.096038] PM: Adding info for No Bus:9:1
[   54.572083] EXT3-fs (sda1): using internal journal
[   54.652111] EXT3-fs: barriers not enabled
[   54.656055] kjournald starting.  Commit interval 5 seconds
[   54.660011] EXT3-fs (sda5): using internal journal
[   54.666132] EXT3-fs (sda5): mounted filesystem with writeback data mode
[   54.676004] PPS event at 4294905965
[   55.680006] PPS event at 4294906216
[   55.788980] rc.sysinit used greatest stack depth: 1732 bytes left
[   56.680005] PPS event at 4294906466
[   57.680001] PPS event at 4294906716
[   58.680011] PPS event at 4294906966
[   59.448967] Adding 3911820k swap on /dev/sda2.  Priority:-1 extents:1 across:3911820k 
[   59.680055] PPS event at 4294907216
[   60.680008] PPS event at 4294907466
[   60.785517] ssh used greatest stack depth: 1716 bytes left
[   61.121417] device: 'vcs3': device_add
[   61.121629] PM: Adding info for No Bus:vcs3
[   61.121695] device: 'vcsa3': device_add
[   61.129414] PM: Adding info for No Bus:vcsa3
[   61.145736] device: 'vcs4': device_add
[   61.145965] PM: Adding info for No Bus:vcs4
[   61.146029] device: 'vcsa4': device_add
[   61.146101] PM: Adding info for No Bus:vcsa4
[   61.148085] device: 'vcs10': device_add
[   61.148174] PM: Adding info for No Bus:vcs10
[   61.148227] device: 'vcsa10': device_add
[   61.148298] PM: Adding info for No Bus:vcsa10
[   61.152050] device: 'vcs8': device_add
[   61.152128] PM: Adding info for No Bus:vcs8
[   61.152180] device: 'vcsa8': device_add
[   61.152251] PM: Adding info for No Bus:vcsa8
[   61.160734] device: 'vcs7': device_add
[   61.160961] PM: Adding info for No Bus:vcs7
[   61.161025] device: 'vcsa7': device_add
[   61.161102] PM: Adding info for No Bus:vcsa7
[   61.176097] device: 'vcs9': device_add
[   61.176268] PM: Adding info for No Bus:vcs9
[   61.176333] device: 'vcsa9': device_add
[   61.176418] PM: Adding info for No Bus:vcsa9
[   61.180006] device: 'vcs6': device_add
[   61.180006] PM: Adding info for No Bus:vcs6
[   61.180006] device: 'vcsa6': device_add
[   61.180006] PM: Adding info for No Bus:vcsa6
[   61.196042] device: 'vcs5': device_add
[   61.196119] PM: Adding info for No Bus:vcs5
[   61.196171] device: 'vcsa5': device_add
[   61.196243] PM: Adding info for No Bus:vcsa5
[   61.215235] device: 'vcs2': device_add
[   61.215364] PM: Adding info for No Bus:vcs2
[   61.215433] device: 'vcsa2': device_add
[   61.215512] PM: Adding info for No Bus:vcsa2
[   61.680004] PPS event at 4294907716
[   62.680006] PPS event at 4294907966
[   63.680005] PPS event at 4294908216
[   64.680006] PPS event at 4294908466
[   65.680002] PPS event at 4294908716
[   66.680006] PPS event at 4294908966
[   67.680006] PPS event at 4294909216
[   68.680006] PPS event at 4294909466
[   69.680002] PPS event at 4294909716
[   70.680001] PPS event at 4294909966
[   71.680006] PPS event at 4294910216
[   72.680002] PPS event at 4294910466
[   73.680002] PPS event at 4294910716
[   74.680004] PPS event at 4294910966
[   75.680002] PPS event at 4294911216
[   76.680005] PPS event at 4294911466
[   77.680006] PPS event at 4294911716
[   78.680002] PPS event at 4294911966
[   79.680002] PPS event at 4294912216
[   80.680001] PPS event at 4294912466
[   81.680006] PPS event at 4294912716
[   82.680006] PPS event at 4294912966
[   83.680002] PPS event at 4294913216
[   84.680004] PPS event at 4294913466
[   85.680002] PPS event at 4294913716
[   86.680002] PPS event at 4294913966
[   87.680002] PPS event at 4294914216
[   88.680001] PPS event at 4294914466
[   89.680006] PPS event at 4294914716
[   90.680006] PPS event at 4294914966
[   91.680002] PPS event at 4294915216
[   92.680004] PPS event at 4294915466
[   93.680002] PPS event at 4294915716
[   94.680001] PPS event at 4294915966
[   95.680002] PPS event at 4294916216
[   96.680002] PPS event at 4294916466
[   97.680006] PPS event at 4294916716
[   98.680011] PPS event at 4294916966
[   99.680004] PPS event at 4294917216
[  100.680002] PPS event at 4294917466
[  101.680002] PPS event at 4294917716
[  102.680005] PPS event at 4294917966
[  103.680001] PPS event at 4294918216
[  104.680001] PPS event at 4294918466
[  105.680001] PPS event at 4294918716
[  106.680006] PPS event at 4294918966
[  107.680006] PPS event at 4294919216
[  108.680001] PPS event at 4294919466
[  109.680006] PPS event at 4294919716
[  110.680001] PPS event at 4294919966
[  111.680001] PPS event at 4294920216
[  112.680003] PPS event at 4294920466
[  113.680001] PPS event at 4294920716
[  114.680001] PPS event at 4294920966
[  115.680001] PPS event at 4294921216
[  116.680006] PPS event at 4294921466
[  117.680006] PPS event at 4294921716
[  118.680001] PPS event at 4294921966
[  119.680002] PPS event at 4294922216
[  120.680004] PPS event at 4294922466
[  121.680002] PPS event at 4294922716
[  122.680001] PPS event at 4294922966
[  123.680006] PPS event at 4294923216
[  124.680001] PPS event at 4294923466
[  125.680001] PPS event at 4294923716
[  126.680008] PPS event at 4294923966
[  127.680011] PPS event at 4294924216
[  128.680006] PPS event at 4294924466
[  129.680001] PPS event at 4294924716
[  130.680001] PPS event at 4294924966
[  131.680001] PPS event at 4294925216
[  132.680005] PPS event at 4294925466
[  133.680001] PPS event at 4294925716
[  134.680001] PPS event at 4294925966
[  135.680003] PPS event at 4294926216

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  7:53   ` Jens Axboe
                       ` (6 preceding siblings ...)
  2010-06-11  8:32       ` Ingo Molnar
@ 2010-06-11  8:32     ` Ingo Molnar
  7 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-11  8:32 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Eric Anholt, Carl Worth,
	David H?rdeman, Network Development, Andrew Morton,
	Kernel Testers List, Dave Airlie, Linux PM List, Linux SCSI List

[-- Attachment #1: Type: text/plain, Size: 6309 bytes --]


* Jens Axboe <jaxboe@fusionio.com> wrote:

> On 2010-06-09 03:53, Linus Torvalds wrote:
> >> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> >> Date		: 2010-06-05 06:15 (4 days old)
> > 
> > This seems to have been introduced by
> > 
> > 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> > 	Author: Ingo Molnar <mingo@elte.hu>
> > 	Date:   Sat Nov 8 17:05:38 2008 +0100
> > 
> > 	    sched: optimize sched_clock() a bit
> >     
> > 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> > 	    variant of __cycles_2_ns().
> >     
> > 	    Most of the time sched_clock() is called with irqs disabled already.
> > 	    The few places that call it with irqs enabled need to be updated.
> >     
> > 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> > 
> > and this seems to be one of those calling cases that need to be updated.
> > 
> > Ingo? The call trace is:
> > 
> > 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> > 	caller is native_sched_clock+0x3c/0x68
> > 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> > 	Call Trace:
> > 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> > 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> > 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> > 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> > 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> > 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> > 	[<ffffffff81215537>] __make_request+0x338/0x45b
> > 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> > 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> > 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> > 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> > 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> > 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> > 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> > 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> > 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> > 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> > 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> > 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> > 
> > (from the bugzilla thing)
> 
> This should be fixed by commit 28f4197e which was merged on friday.

Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
configs i get bad spinlock warnings during bootup:

[   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
[   28.972003] calling  b44_init+0x0/0x55 @ 1
[   28.976009] bus: 'pci': add driver b44
[   28.976374]  sda:
[   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
[   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
[   28.980000] Call Trace:
[   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
[   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
[   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
[   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
[   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
[   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
[   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
[   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
[   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
[   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
[   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
[   28.980000]  [<4132dd64>] __make_request+0x335/0x376
[   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
[   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
[   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
[   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
[   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
[   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
[   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
[   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
[   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
[   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
[   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
[   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
[   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
[   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
[   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
[   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
[   28.980000]  [<41088904>] read_cache_page+0xb/0x12
[   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
[   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
[   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
[   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
[   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
[   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
[   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
[   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
[   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
[   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
[   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
[   28.980000]  [<41332815>] add_disk+0x57/0x95
[   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
[   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
[   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
[   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
[   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
[   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
[   28.980000]  [<410433df>] kthread+0x5f/0x64
[   28.980000]  [<41043380>] ? kthread+0x0/0x64
[   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
[   29.264071] async/1 used greatest stack depth: 2336 bytes left
[   29.267020] bus: 'ssb': add driver b44
[   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
[   29.267076] calling  init_nic+0x0/0x16 @ 1

Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
attached. Reproducible on that sha1 and with that config.

Thanks,

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 73548 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35-rc2
# Fri Jun 11 12:25:08 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_PCI_QUIRKS is not set
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
CONFIG_SLOW_WORK_DEBUG=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
CONFIG_MVIAC3_2=y
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_INJECT=y
# CONFIG_VM86 is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_1G=y
CONFIG_PAGE_OFFSET=0x40000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_VERBOSE=y
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_PM_RUNTIME is not set
CONFIG_PM_OPS=y
# CONFIG_ACPI is not set
CONFIG_SFI=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCMCIA_PROBE=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
CONFIG_TCP_CONG_LP=y
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
CONFIG_IP_VS=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
# CONFIG_IP_VS_LBLC is not set
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
# CONFIG_IP_VS_NQ is not set

#
# IPVS application helper
#
# CONFIG_IP_VS_FTP is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_DCCP=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
# CONFIG_RDS_TCP is not set
CONFIG_RDS_DEBUG=y
# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
# CONFIG_ATM_BR2684 is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
# CONFIG_L2TP_ETH is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_RPS=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_L2CAP_EXT_FEATURES=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
# CONFIG_BT_BNEP_PROTO_FILTER is not set
# CONFIG_BT_CMTP is not set
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
# CONFIG_BT_ATH3K is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT_SYSFS is not set
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set

#
# CFG80211 needs to be enabled for MAC80211
#

#
# Some wireless drivers require a rate control algorithm
#
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
# CONFIG_PNPACPI is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_BLK_DEV_HD=y
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=y
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=y
# CONFIG_HP_ILO is not set
CONFIG_ISL29003=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=y
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=y
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_DTC3280=y
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_GENERIC_NCR5380=y
CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_NCR53C406A=y
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_PAS16=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
# CONFIG_SCSI_T128 is not set
CONFIG_SCSI_U14_34F=y
# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
# CONFIG_SCSI_ULTRASTOR is not set
CONFIG_SCSI_NSP32=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_SRP=y
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
# CONFIG_PATA_CMD64X is not set
CONFIG_PATA_CS5520=y
# CONFIG_PATA_CS5530 is not set
CONFIG_PATA_CS5535=y
# CONFIG_PATA_CS5536 is not set
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
# CONFIG_PATA_HPT366 is not set
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
# CONFIG_PATA_NETCELL is not set
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RDC is not set
CONFIG_PATA_SC1200=y
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_QDI=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_WINBOND_VLB=y

#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MULTICORE_RAID456=y
CONFIG_MD_RAID6_PQ=y
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
# CONFIG_BLK_DEV_DM is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# The newer stack is recommended.
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
# CONFIG_IEEE1394 is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
# CONFIG_I2O_BUS is not set
# CONFIG_I2O_BLOCK is not set
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_EQUALIZER=y
CONFIG_TUN=y
CONFIG_VETH=y
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_LANCE=y
CONFIG_NET_VENDOR_SMC=y
# CONFIG_WD80x3 is not set
CONFIG_ULTRA=y
# CONFIG_SMC9194 is not set
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=y
CONFIG_NI65=y
CONFIG_DNET=y
# CONFIG_NET_TULIP is not set
CONFIG_AT1700=y
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_APRICOT=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_CS89x0=y
CONFIG_E100=y
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
CONFIG_SIS900=y
CONFIG_EPIC100=y
# CONFIG_SMSC9420 is not set
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
# CONFIG_TLAN is not set
CONFIG_KS8842=y
# CONFIG_KS8851_MLL is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_SC92031=y
CONFIG_NET_POCKET=y
CONFIG_ATP=y
# CONFIG_DE600 is not set
CONFIG_DE620=y
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IP1000=y
# CONFIG_IGB is not set
CONFIG_IGBVF=y
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_R8169_VLAN is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_CNIC=y
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=y
CONFIG_ATL1E=y
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4_DEPENDS=y
CONFIG_CHELSIO_T4=y
CONFIG_ENIC=y
# CONFIG_IXGBE is not set
CONFIG_IXGBEVF=y
CONFIG_IXGB=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_MYRI10GE=y
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
# CONFIG_MLX4_DEBUG is not set
CONFIG_TEHUTI=y
CONFIG_BNX2X=y
CONFIG_QLCNIC=y
CONFIG_QLGE=y
CONFIG_SFC=y
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMTR is not set
CONFIG_IBMOL=y
CONFIG_IBMLS=y
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
CONFIG_SMCTR=y
CONFIG_WLAN=y
CONFIG_AIRO=y
# CONFIG_ATMEL is not set
CONFIG_PRISM54=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set

#
# WiMAX Wireless Broadband devices
#

#
# Enable MMC support to see WiMAX SDIO drivers
#
# CONFIG_WIMAX_I2400M_USB is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=y
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_HSO is not set
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_CDC_PHONET=y
CONFIG_USB_IPHETH=y
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=y
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
CONFIG_ATM_HORIZON=y
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=y
CONFIG_IEEE802154_DRIVERS=y
# CONFIG_IEEE802154_FAKEHARD is not set

#
# CAIF transport drivers
#
# CONFIG_CAIF_TTY is not set
# CONFIG_FDDI is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=y
# CONFIG_PPPOATM is not set
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VMXNET3=y
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=y
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=y
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=y

#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
CONFIG_CAPI_EICON=y
# CONFIG_ISDN_DIVAS is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_DUMMYLL is not set
# CONFIG_GIGASET_BASE is not set
CONFIG_GIGASET_M105=y
# CONFIG_GIGASET_M101 is not set
CONFIG_GIGASET_DEBUG=y
# CONFIG_MISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_KBTAB=y
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879=y
# CONFIG_TOUCHSCREEN_DA9034 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=y
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_MCS5000=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_HTCPEN is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
CONFIG_TOUCHSCREEN_USB_3M=y
# CONFIG_TOUCHSCREEN_USB_ITM is not set
CONFIG_TOUCHSCREEN_USB_ETURBO=y
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
# CONFIG_TOUCHSCREEN_USB_ETT_TC5UH is not set
CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_APANEL=y
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_WINBOND_CIR=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_WM831X_ON=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_ISI=y
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=y
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_DTLK=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
# CONFIG_MWAVE is not set
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_CS5535_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
CONFIG_SCx200_I2C=y
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO expanders:
#
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_SCH=y

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=y
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TC35892=y
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8994=y
CONFIG_GPIO_ADP5588=y

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_TIMBERDALE is not set
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders:
#

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
# CONFIG_WM831X_POWER is not set
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_OLPC is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_DA9030 is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_HDAPS is not set
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_SENSORS_APPLESMC=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=y
# CONFIG_ALIM7101_WDT is not set
CONFIG_GEODE_WDT=y
CONFIG_SC520_WDT=y
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=y
# CONFIG_SC1200_WDT is not set
CONFIG_SCx200_WDT=y
# CONFIG_PC87413_WDT is not set
CONFIG_60XX_WDT=y
# CONFIG_SBC8360_WDT is not set
CONFIG_SBC7240_WDT=y
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_W83627HF_WDT=y
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y

#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=y
CONFIG_MIXCOMWD=y
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
# CONFIG_TWL4030_CORE is not set
CONFIG_MFD_TC35892=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
# CONFIG_AB3550_CORE is not set
CONFIG_MFD_TIMBERDALE=y
CONFIG_LPC_SCH=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_BQ24022=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_WM831X=y
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_KMS is not set
CONFIG_DRM_MGA=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX1=y
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_DA903X=y
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_WM831X is not set
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_88PM860X=y

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_VMIDI=y
# CONFIG_SOUND_TRIX is not set
CONFIG_SOUND_MSS=y
# CONFIG_SOUND_MPU401 is not set
CONFIG_SOUND_PAS=y
CONFIG_PAS_JOYSTICK=y
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
CONFIG_SOUND_YM3812=y
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# Special HID drivers
#
CONFIG_HID_3M_PCT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CANDO is not set
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EGALAX=y
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MOSART=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_FB is not set
CONFIG_HID_PICOLCD_BACKLIGHT=y
# CONFIG_HID_PICOLCD_LCD is not set
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_QUANTA=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_ROCCAT_KONE=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_STANTUM=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_WACOM=y
# CONFIG_HID_WACOM_POWER_SUPPLY is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_FUNSOFT=y
CONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_MOTOROLA=y
CONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=y
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=y
CONFIG_USB_SERIAL_ZIO=y
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_WLP=y
CONFIG_UWB_I1480U=y
CONFIG_UWB_I1480U_WLP=y
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_NET48XX is not set
# CONFIG_LEDS_WRAP is not set
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_DA903X is not set
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_AMSO1100 is not set
CONFIG_INFINIBAND_CXGB3=y
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=y
CONFIG_MLX4_INFINIBAND=y
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_MAX8925 is not set
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_WM831X=y

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_DELL_LAPTOP=y

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_EXT4_DEBUG=y
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=y
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTRS is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
# CONFIG_ACORN_PARTITION_RISCIX is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_LKDTM is not set
CONFIG_CPU_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_KSYM_TRACER=y
# CONFIG_PROFILE_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
CONFIG_WORKQUEUE_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_EVENT_TRACE_TEST_SYSCALLS is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
# CONFIG_KDB_KEYBOARD is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="tomoyo"
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
# CONFIG_CRYPTO_DEV_GEODE is not set
CONFIG_CRYPTO_DEV_HIFN_795X=y
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_NLATTR=y

[-- Attachment #3: boot.log --]
[-- Type: text/plain, Size: 547960 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35-rc2-00131-g7908a9e (mingo@sirius) (gcc version 4.4.4 20100514 (Red Hat 4.4.4-3) (GCC) ) #8184 SMP Fri Jun 11 12:26:19 CEST 2010
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.3 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 02c00000
[    0.000000] Scan SMP from 40000000 for 1024 bytes.
[    0.000000] Scan SMP from 4009fc00 for 1024 bytes.
[    0.000000] Scan SMP from 400f0000 for 65536 bytes.
[    0.000000] found SMP MP-table at [400f5680] f5680
[    0.000000]   mpc: f1400-f152c
[    0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
[    0.000000]  0000000000 - 003fff0000 page 4k
[    0.000000] kernel direct mapping tables up to 3fff0000 @ 100000-204000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 1023MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 3fff0000
[    0.000000]   low ram: 0 - 3fff0000
[    0.000000] early_res array is doubled to 64 at [11080 - 1187f]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0003fff0
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262015
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 2016 pages used for memmap
[    0.000000]   Normal zone: 256016 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000]   mpc: f1400-f152c
[    0.000000] MPTABLE: OEM ID: OEM00000
[    0.000000] MPTABLE: Product ID: PROD00000000
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] Processor #1
[    0.000000] Bus #0 is PCI   
[    0.000000] Bus #1 is PCI   
[    0.000000] Bus #2 is PCI   
[    0.000000] Bus #3 is PCI   
[    0.000000] Bus #4 is PCI   
[    0.000000] Bus #5 is PCI   
[    0.000000] Bus #6 is ISA   
[    0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 1-24
[    0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b
[    0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03
[    0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
[    0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b
[    0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
[    0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
[    0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
[    0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
[    0.000000] Processors: 2
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] nr_irqs_gsi: 41
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 15 pages/cpu @43000000 s45272 r0 d16168 u2097152
[    0.000000] pcpu-alloc: s45272 r0 d16168 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
[    0.000000] Kernel command line: root=/dev/sda1 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 3
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Subtract (47 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0001000000 - 0002619de0]   TEXT DATA BSS
[    0.000000]   #3 [000261a000 - 0002625149]             BRK
[    0.000000]   #4 [00000f5690 - 0000100000]   BIOS reserved
[    0.000000]   #5 [00000f5680 - 00000f5690]    MP-table mpf
[    0.000000]   #6 [000009f800 - 00000f1400]   BIOS reserved
[    0.000000]   #7 [00000f152c - 00000f5680]   BIOS reserved
[    0.000000]   #8 [00000f1400 - 00000f152c]    MP-table mpc
[    0.000000]   #9 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #10 [0000100000 - 00001f7000]         PGTABLE
[    0.000000]   #11 [0002626000 - 0002627000]         BOOTMEM
[    0.000000]   #12 [0000011000 - 0000011080]         BOOTMEM
[    0.000000]   #13 [0002627000 - 00026a7000]         BOOTMEM
[    0.000000]   #14 [00026a7000 - 0002727000]         BOOTMEM
[    0.000000]   #15 [0002727000 - 00027a7000]         BOOTMEM
[    0.000000]   #16 [00027a7000 - 0002827000]         BOOTMEM
[    0.000000]   #17 [0002827000 - 00028a7000]         BOOTMEM
[    0.000000]   #18 [00028a7000 - 0002927000]         BOOTMEM
[    0.000000]   #19 [0002927000 - 00029a7000]         BOOTMEM
[    0.000000]   #20 [00029a7000 - 0002a27000]         BOOTMEM
[    0.000000]   #21 [0002a27000 - 0002aa7000]         BOOTMEM
[    0.000000]   #22 [0002aa7000 - 0002b27000]         BOOTMEM
[    0.000000]   #23 [0002b27000 - 0002ba7000]         BOOTMEM
[    0.000000]   #24 [0002ba7000 - 0002c27000]         BOOTMEM
[    0.000000]   #25 [0002c27000 - 0002ca7000]         BOOTMEM
[    0.000000]   #26 [0002ca7000 - 0002d27000]         BOOTMEM
[    0.000000]   #27 [0002d27000 - 0002da7000]         BOOTMEM
[    0.000000]   #28 [0002da7000 - 0002e27000]         BOOTMEM
[    0.000000]   #29 [0002e27000 - 0002e3f000]         BOOTMEM
[    0.000000]   #30 [0002e3f000 - 0002e57000]         BOOTMEM
[    0.000000]   #31 [0002619de0 - 0002619e07]         BOOTMEM
[    0.000000]   #32 [0002619e20 - 0002619f1c]         BOOTMEM
[    0.000000]   #33 [0002619f20 - 0002619f30]         BOOTMEM
[    0.000000]   #34 [0002619f40 - 0002619ff5]         BOOTMEM
[    0.000000]   #35 [0002625160 - 0002625215]         BOOTMEM
[    0.000000]   #36 [0003000000 - 000300f000]         BOOTMEM
[    0.000000]   #37 [0003200000 - 000320f000]         BOOTMEM
[    0.000000]   #38 [0002625220 - 0002625224]         BOOTMEM
[    0.000000]   #39 [0002625240 - 0002625244]         BOOTMEM
[    0.000000]   #40 [0002625260 - 0002625268]         BOOTMEM
[    0.000000]   #41 [0002625280 - 0002625288]         BOOTMEM
[    0.000000]   #42 [00026252a0 - 0002625348]         BOOTMEM
[    0.000000]   #43 [0002625360 - 00026253c8]         BOOTMEM
[    0.000000]   #44 [0002e57000 - 0002e5b000]         BOOTMEM
[    0.000000]   #45 [0002e5b000 - 0002edb000]         BOOTMEM
[    0.000000]   #46 [0002edb000 - 0002f1b000]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 1015092k/1048512k available (11925k kernel code, 32968k reserved, 7341k data, 656k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffa98000 - 0xfffff000   (5532 kB)
[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.000000]     vmalloc : 0x807f0000 - 0xff3fe000   (2028 MB)
[    0.000000]     lowmem  : 0x40000000 - 0x7fff0000   (1023 MB)
[    0.000000]       .init : 0x422d1000 - 0x42375000   ( 656 kB)
[    0.000000]       .data : 0x41ba5570 - 0x422d0b8c   (7341 kB)
[    0.000000]       .text : 0x41000000 - 0x41ba5570   (11925 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU debugfs-based tracing is enabled.
[    0.000000] 	Hierarchical RCU autobalancing is disabled.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:1280
[    0.000000] CPU 0 irqstacks, hard=43000000 soft=43001000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.000000] ------------------------
[    0.000000] | Locking API testsuite:
[    0.000000] ----------------------------------------------------------------------------
[    0.000000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                     double unlock:  ok  |  ok  |failed|  ok  |failed|failed|
[    0.000000]                   initialize held:failed|failed|failed|failed|failed|failed|
[    0.000000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]               recursive read-lock:             |  ok  |             |failed|
[    0.000000]            recursive read-lock #2:             |  ok  |             |failed|
[    0.000000]             mixed read-write-lock:             |failed|             |failed|
[    0.000000]             mixed write-read-lock:             |failed|             |failed|
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       hard-irq read-recursion/123:  ok  |
[    0.000000]       soft-irq read-recursion/123:  ok  |
[    0.000000]       hard-irq read-recursion/132:  ok  |
[    0.000000]       soft-irq read-recursion/132:  ok  |
[    0.000000]       hard-irq read-recursion/213:  ok  |
[    0.000000]       soft-irq read-recursion/213:  ok  |
[    0.000000]       hard-irq read-recursion/231:  ok  |
[    0.000000]       soft-irq read-recursion/231:  ok  |
[    0.000000]       hard-irq read-recursion/312:  ok  |
[    0.000000]       soft-irq read-recursion/312:  ok  |
[    0.000000]       hard-irq read-recursion/321:  ok  |
[    0.000000]       soft-irq read-recursion/321:  ok  |
[    0.000000] --------------------------------------------------------
[    0.000000] 142 out of 218 testcases failed, as expected. |
[    0.000000] ----------------------------------------------------
[    0.000000] ODEBUG: 8 of 8 active objects replaced
[    0.000000] ODEBUG: selftest passed
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2010.275 MHz processor.
[    0.012005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.55 BogoMIPS (lpj=8041100)
[    0.020003] pid_max: default: 32768 minimum: 301
[    0.024074] Security Framework initialized
[    0.028012] TOMOYO Linux initialized
[    0.032161] Mount-cache hash table entries: 512
[    0.036399] Initializing cgroup subsys debug
[    0.040004] Initializing cgroup subsys ns
[    0.044004] Initializing cgroup subsys cpuacct
[    0.048006] Initializing cgroup subsys freezer
[    0.052003] Initializing cgroup subsys blkio
[    0.056068] CPU: Physical Processor ID: 0
[    0.060002] CPU: Processor Core ID: 0
[    0.064003] mce: CPU supports 5 MCE banks
[    0.068017] Performance Events: AMD PMU driver.
[    0.073530] ... version:                0
[    0.076002] ... bit width:              48
[    0.080002] ... generic registers:      4
[    0.084002] ... value mask:             0000ffffffffffff
[    0.088002] ... max period:             00007fffffffffff
[    0.092002] ... fixed-purpose events:   0
[    0.096002] ... event mask:             000000000000000f
[    0.104904] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.108007] enabled ExtINT on CPU#0
[    0.112048] ExtINT not setup in hardware but reported by MP table
[    0.120028] ENABLING IO-APIC IRQs
[    0.123336] init IO_APIC IRQs
[    0.124002]  2-0 (apicid-pin) not connected
[    0.128007] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[    0.132008] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[    0.136007] IOAPIC[0]: Set routing entry (2-3 -> 0x29 -> IRQ 29 Mode:1 Active:1)
[    0.140000] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-5 -> 0x41 -> IRQ 31 Mode:1 Active:1)
[    0.140000] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-11 -> 0x49 -> IRQ 37 Mode:1 Active:1)
[    0.140000] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[    0.140000] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[    0.140000]  2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
[    0.140000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.140000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.140000] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.140000] ..... (found apic 0 pin 0) ...
[    0.182315] ....... works.
[    0.184001] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[    0.192002] Using local APIC timer interrupts.
[    0.192003] calibrating APIC timer ...
[    0.200000] ... lapic delta = 1256509
[    0.200000] ..... delta 1256509
[    0.200000] ..... mult: 53963277
[    0.200000] ..... calibration result: 804165
[    0.200000] ..... CPU clock speed is 2010.1659 MHz.
[    0.200000] ..... host bus clock speed is 201.0165 MHz.
[    0.200000] ... verify APIC timer
[    0.311691] ... jiffies delta = 25
[    0.312001] ... jiffies result ok
[    0.316017] calling  migration_init+0x0/0x3c @ 1
[    0.320005] initcall migration_init+0x0/0x3c returned 0 after 0 usecs
[    0.324003] calling  spawn_ksoftirqd+0x0/0x3c @ 1
[    0.328051] initcall spawn_ksoftirqd+0x0/0x3c returned 0 after 0 usecs
[    0.332005] calling  init_call_single_data+0x0/0x96 @ 1
[    0.336005] initcall init_call_single_data+0x0/0x96 returned 0 after 0 usecs
[    0.340004] calling  cpu_stop_init+0x0/0xab @ 1
[    0.344054] initcall cpu_stop_init+0x0/0xab returned 0 after 0 usecs
[    0.348004] calling  spawn_softlockup_task+0x0/0x65 @ 1
[    0.352045] initcall spawn_softlockup_task+0x0/0x65 returned 0 after 0 usecs
[    0.356005] calling  tracer_alloc_buffers+0x0/0x172 @ 1
[    0.360138] Testing tracer nop: PASSED
[    0.364757] initcall tracer_alloc_buffers+0x0/0x172 returned 0 after 3906 usecs
[    0.368003] calling  init_trace_printk+0x0/0x7 @ 1
[    0.372003] initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs
[    0.376003] calling  trace_workqueue_early_init+0x0/0x121 @ 1
[    0.380176] initcall trace_workqueue_early_init+0x0/0x121 returned 0 after 0 usecs
[    0.384302] CPU 1 irqstacks, hard=43200000 soft=43201000
[    0.388007] Booting Node   0, Processors  #1 Ok.
[    0.016000] Initializing CPU#1
[    0.016000] masked ExtINT on CPU#1
[    0.484093] Brought up 2 CPUs
[    0.488003] Total of 2 processors activated (8041.41 BogoMIPS).
[    0.496153] device: 'platform': device_add
[    0.500016] PM: Adding info for No Bus:platform
[    0.504094] bus: 'platform': registered
[    0.508006] Registering sysdev class 'cpu'
[    0.512048] Registering sysdev class 'memory'
[    0.516049] Registering sys device of class 'memory'
[    0.520006] Registering sys device 'memory0'
[    0.524045] Registering sys device of class 'memory'
[    0.528005] Registering sys device 'memory1'
[    0.532043] Registering sys device of class 'memory'
[    0.540005] Registering sys device 'memory2'
[    0.544043] Registering sys device of class 'memory'
[    0.548005] Registering sys device 'memory3'
[    0.552052] Registering sys device of class 'memory'
[    0.556005] Registering sys device 'memory4'
[    0.560044] Registering sys device of class 'memory'
[    0.568005] Registering sys device 'memory5'
[    0.572043] Registering sys device of class 'memory'
[    0.576005] Registering sys device 'memory6'
[    0.580043] Registering sys device of class 'memory'
[    0.584005] Registering sys device 'memory7'
[    0.588043] Registering sys device of class 'memory'
[    0.596005] Registering sys device 'memory8'
[    0.600043] Registering sys device of class 'memory'
[    0.604005] Registering sys device 'memory9'
[    0.608043] Registering sys device of class 'memory'
[    0.612005] Registering sys device 'memory10'
[    0.616043] Registering sys device of class 'memory'
[    0.624005] Registering sys device 'memory11'
[    0.628052] Registering sys device of class 'memory'
[    0.632005] Registering sys device 'memory12'
[    0.636044] Registering sys device of class 'memory'
[    0.640005] Registering sys device 'memory13'
[    0.644043] Registering sys device of class 'memory'
[    0.652005] Registering sys device 'memory14'
[    0.656043] Registering sys device of class 'memory'
[    0.660005] Registering sys device 'memory15'
[    0.664509] calling  init_mmap_min_addr+0x0/0x11 @ 1
[    0.668004] initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
[    0.676005] calling  init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[    0.684006] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[    0.692004] calling  net_ns_init+0x0/0x1a8 @ 1
[    0.696006] initcall net_ns_init+0x0/0x1a8 returned 0 after 0 usecs
[    0.704004] calling  e820_mark_nvs_memory+0x0/0x31 @ 1
[    0.708006] initcall e820_mark_nvs_memory+0x0/0x31 returned 0 after 0 usecs
[    0.716003] calling  cpufreq_tsc+0x0/0x25 @ 1
[    0.720004] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
[    0.724003] calling  pci_reboot_init+0x0/0x11 @ 1
[    0.728005] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.736003] calling  reboot_init+0x0/0x11 @ 1
[    0.740010] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[    0.748003] calling  init_lapic_sysfs+0x0/0x28 @ 1
[    0.752002] Registering sysdev class 'lapic'
[    0.756042] Registering sys device of class 'lapic'
[    0.760005] Registering sys device 'lapic0'
[    0.764039] initcall init_lapic_sysfs+0x0/0x28 returned 0 after 11718 usecs
[    0.772004] calling  init_smp_flush+0x0/0x2a @ 1
[    0.776003] initcall init_smp_flush+0x0/0x2a returned 0 after 0 usecs
[    0.784004] calling  alloc_frozen_cpus+0x0/0x7 @ 1
[    0.788003] initcall alloc_frozen_cpus+0x0/0x7 returned 0 after 0 usecs
[    0.796003] calling  ksysfs_init+0x0/0x74 @ 1
[    0.800017] initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs
[    0.804003] calling  async_init+0x0/0x3d @ 1
[    0.808041] initcall async_init+0x0/0x3d returned 0 after 0 usecs
[    0.812004] calling  init_jiffies_clocksource+0x0/0xf @ 1
[    0.816006] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[    0.820003] calling  pm_init+0x0/0x2d @ 1
[    0.824019] initcall pm_init+0x0/0x2d returned 0 after 0 usecs
[    0.828003] calling  pm_disk_init+0x0/0x14 @ 1
[    0.832007] initcall pm_disk_init+0x0/0x14 returned 0 after 0 usecs
[    0.836004] calling  swsusp_header_init+0x0/0x26 @ 1
[    0.840005] initcall swsusp_header_init+0x0/0x26 returned 0 after 0 usecs
[    0.844003] calling  init_ftrace_syscalls+0x0/0x96 @ 1
[    0.852382] initcall init_ftrace_syscalls+0x0/0x96 returned 0 after 3906 usecs
[    0.856003] calling  init_hw_breakpoint+0x0/0xee @ 1
[    0.860040] initcall init_hw_breakpoint+0x0/0xee returned 0 after 0 usecs
[    0.864003] calling  init_zero_pfn+0x0/0x41 @ 1
[    0.868003] initcall init_zero_pfn+0x0/0x41 returned 0 after 0 usecs
[    0.872003] calling  filelock_init+0x0/0x27 @ 1
[    0.876009] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs
[    0.880003] calling  init_script_binfmt+0x0/0x11 @ 1
[    0.884004] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.888003] calling  init_elf_binfmt+0x0/0x11 @ 1
[    0.892003] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
[    0.896004] calling  debugfs_init+0x0/0x4a @ 1
[    0.900012] initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs
[    0.904003] calling  securityfs_init+0x0/0x41 @ 1
[    0.908017] initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs
[    0.912004] calling  calibrate_xor_blocks+0x0/0x139 @ 1
[    0.916004] xor: automatically using best checksumming function: pIII_sse
[    0.940003]    pIII_sse  :  6085.000 MB/sec
[    0.944002] xor: using function: pIII_sse (6085.000 MB/sec)
[    0.948008] initcall calibrate_xor_blocks+0x0/0x139 returned 0 after 31250 usecs
[    0.952003] calling  random32_init+0x0/0xca @ 1
[    0.956004] initcall random32_init+0x0/0xca returned 0 after 0 usecs
[    0.960003] calling  test_atomic64+0x0/0x2e0 @ 1
[    0.964004] atomic64 test passed for i386+ platform with CX8 and with SSE
[    0.968003] initcall test_atomic64+0x0/0x2e0 returned 0 after 3906 usecs
[    0.972003] calling  sfi_sysfs_init+0x0/0xba @ 1
[    0.976003] initcall sfi_sysfs_init+0x0/0xba returned 0 after 0 usecs
[    0.980003] calling  regulator_init+0x0/0x23 @ 1
[    0.984002] regulator: core version 0.5
[    0.988002] device class 'regulator': registering
[    0.992052] initcall regulator_init+0x0/0x23 returned 0 after 7812 usecs
[    0.996006] calling  early_resume_init+0x0/0x169 @ 1
[    1.000020] Time: 21:24:41  Date: 06/11/10
[    1.004004] initcall early_resume_init+0x0/0x169 returned 0 after 3906 usecs
[    1.008004] calling  cpufreq_core_init+0x0/0x8c @ 1
[    1.012009] initcall cpufreq_core_init+0x0/0x8c returned 0 after 0 usecs
[    1.016003] calling  cpuidle_init+0x0/0x32 @ 1
[    1.020009] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs
[    1.024004] calling  sock_init+0x0/0x51 @ 1
[    1.028068] initcall sock_init+0x0/0x51 returned 0 after 0 usecs
[    1.032004] calling  netpoll_init+0x0/0x39 @ 1
[    1.036003] initcall netpoll_init+0x0/0x39 returned 0 after 0 usecs
[    1.040003] calling  netlink_proto_init+0x0/0x159 @ 1
[    1.044028] NET: Registered protocol family 16
[    1.048029] initcall netlink_proto_init+0x0/0x159 returned 0 after 3906 usecs
[    1.052003] calling  olpc_init+0x0/0x14b @ 1
[    1.056003] initcall olpc_init+0x0/0x14b returned 0 after 0 usecs
[    1.060003] calling  bdi_class_init+0x0/0x40 @ 1
[    1.064004] device class 'bdi': registering
[    1.068071] initcall bdi_class_init+0x0/0x40 returned 0 after 3906 usecs
[    1.072003] calling  kobject_uevent_init+0x0/0x1e @ 1
[    1.076013] initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs
[    1.080003] calling  gpiolib_sysfs_init+0x0/0x7e @ 1
[    1.084002] device class 'gpio': registering
[    1.088067] initcall gpiolib_sysfs_init+0x0/0x7e returned 0 after 3906 usecs
[    1.092003] calling  pcibus_class_init+0x0/0x14 @ 1
[    1.096002] device class 'pci_bus': registering
[    1.100051] initcall pcibus_class_init+0x0/0x14 returned 0 after 3906 usecs
[    1.104003] calling  pci_driver_init+0x0/0xf @ 1
[    1.108062] bus: 'pci': registered
[    1.111466] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
[    1.112004] calling  lcd_class_init+0x0/0x3f @ 1
[    1.116002] device class 'lcd': registering
[    1.120062] initcall lcd_class_init+0x0/0x3f returned 0 after 3906 usecs
[    1.124003] calling  backlight_class_init+0x0/0x4d @ 1
[    1.128003] device class 'backlight': registering
[    1.132052] initcall backlight_class_init+0x0/0x4d returned 0 after 3906 usecs
[    1.136003] calling  video_output_class_init+0x0/0x14 @ 1
[    1.140002] device class 'video_output': registering
[    1.144051] initcall video_output_class_init+0x0/0x14 returned 0 after 3906 usecs
[    1.148004] calling  tty_class_init+0x0/0x2f @ 1
[    1.152002] device class 'tty': registering
[    1.156050] initcall tty_class_init+0x0/0x2f returned 0 after 3906 usecs
[    1.160004] calling  vtconsole_class_init+0x0/0xa1 @ 1
[    1.164002] device class 'vtconsole': registering
[    1.168055] device: 'vtcon0': device_add
[    1.172012] PM: Adding info for No Bus:vtcon0
[    1.176053] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 11718 usecs
[    1.180003] calling  i2c_init+0x0/0x35 @ 1
[    1.184075] bus: 'i2c': registered
[    1.188003] bus: 'i2c': add driver dummy
[    1.192054] i2c-core: driver [dummy] registered
[    1.196004] initcall i2c_init+0x0/0x35 returned 0 after 11718 usecs
[    1.200003] calling  amd_postcore_init+0x0/0x85 @ 1
[    1.204006] node 0 link 0: io port [1000, fffff]
[    1.208003] TOM: 0000000040000000 aka 1024M
[    1.212003] node 0 link 0: mmio [e0000000, efffffff]
[    1.216192] node 0 link 0: mmio [feb00000, fec0ffff]
[    1.224003] node 0 link 0: mmio [a0000, bffff]
[    1.228191] node 0 link 0: mmio [40000000, fed3ffff]
[    1.232191] bus: [00, ff] on node 0 link 0
[    1.236003] bus: 00 index 0 [io  0x0000-0xffff]
[    1.240002] bus: 00 index 1 [mem 0x40000000-0xffffffff]
[    1.244002] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff]
[    1.248002] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[    1.252003] initcall amd_postcore_init+0x0/0x85 returned 0 after 46875 usecs
[    1.256004] calling  arch_kdebugfs_init+0x0/0x1e @ 1
[    1.260009] initcall arch_kdebugfs_init+0x0/0x1e returned 0 after 0 usecs
[    1.264003] calling  init_pit_clocksource+0x0/0x9e @ 1
[    1.268003] initcall init_pit_clocksource+0x0/0x9e returned 0 after 0 usecs
[    1.272003] calling  mtrr_if_init+0x0/0x44 @ 1
[    1.276009] initcall mtrr_if_init+0x0/0x44 returned 0 after 0 usecs
[    1.280003] calling  kdump_buf_page_init+0x0/0x76 @ 1
[    1.284021] initcall kdump_buf_page_init+0x0/0x76 returned 0 after 0 usecs
[    1.288003] calling  pci_arch_init+0x0/0x42 @ 1
[    1.300444] PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5
[    1.304013] initcall pci_arch_init+0x0/0x42 returned 0 after 11718 usecs
[    1.308003] calling  topology_init+0x0/0x50 @ 1
[    1.312002] Registering sys device of class 'cpu'
[    1.316008] Registering sys device 'cpu0'
[    1.320050] Registering sys device of class 'cpu'
[    1.324005] Registering sys device 'cpu1'
[    1.328049] initcall topology_init+0x0/0x50 returned 0 after 15625 usecs
[    1.332003] calling  mtrr_init_finialize+0x0/0x35 @ 1
[    1.336004] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
[    1.340003] calling  param_sysfs_init+0x0/0x2c5 @ 1
[    1.380209] initcall param_sysfs_init+0x0/0x2c5 returned 0 after 35156 usecs
[    1.384004] calling  pm_sysrq_init+0x0/0x16 @ 1
[    1.388003] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
[    1.392003] calling  init_slow_work+0x0/0x51 @ 1
[    1.396021] initcall init_slow_work+0x0/0x51 returned 0 after 0 usecs
[    1.400003] calling  default_bdi_init+0x0/0x8c @ 1
[    1.404044] device: 'default': device_add
[    1.408018] PM: Adding info for No Bus:default
[    1.412064] initcall default_bdi_init+0x0/0x8c returned 0 after 7812 usecs
[    1.416004] calling  init_bio+0x0/0xf2 @ 1
[    1.420051] bio: create slab <bio-0> at 0
[    1.424138] initcall init_bio+0x0/0xf2 returned 0 after 3906 usecs
[    1.432004] calling  fsnotify_init+0x0/0xf @ 1
[    1.436008] initcall fsnotify_init+0x0/0xf returned 0 after 0 usecs
[    1.440003] calling  fsnotify_notification_init+0x0/0x5b @ 1
[    1.448012] initcall fsnotify_notification_init+0x0/0x5b returned 0 after 0 usecs
[    1.456003] calling  cryptomgr_init+0x0/0xf @ 1
[    1.460003] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
[    1.464003] calling  blk_settings_init+0x0/0x1d @ 1
[    1.468003] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
[    1.476003] calling  blk_ioc_init+0x0/0x24 @ 1
[    1.480014] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs
[    1.488005] calling  blk_softirq_init+0x0/0x73 @ 1
[    1.492004] initcall blk_softirq_init+0x0/0x73 returned 0 after 0 usecs
[    1.500003] calling  blk_iopoll_setup+0x0/0x73 @ 1
[    1.504004] initcall blk_iopoll_setup+0x0/0x73 returned 0 after 0 usecs
[    1.508003] calling  genhd_device_init+0x0/0x50 @ 1
[    1.516002] device class 'block': registering
[    1.520051] initcall genhd_device_init+0x0/0x50 returned 0 after 3906 usecs
[    1.528003] calling  blk_dev_integrity_init+0x0/0x24 @ 1
[    1.532008] initcall blk_dev_integrity_init+0x0/0x24 returned 0 after 0 usecs
[    1.540003] calling  gpiolib_debugfs_init+0x0/0x1f @ 1
[    1.544027] initcall gpiolib_debugfs_init+0x0/0x1f returned 0 after 0 usecs
[    1.552003] calling  max7300_init+0x0/0x11 @ 1
[    1.556003] bus: 'i2c': add driver max7300
[    1.560067] i2c-core: driver [max7300] registered
[    1.564004] initcall max7300_init+0x0/0x11 returned 0 after 7812 usecs
[    1.572003] calling  pca953x_init+0x0/0x11 @ 1
[    1.576002] bus: 'i2c': add driver pca953x
[    1.580052] i2c-core: driver [pca953x] registered
[    1.584004] initcall pca953x_init+0x0/0x11 returned 0 after 7812 usecs
[    1.592003] calling  tc35892_gpio_init+0x0/0xf @ 1
[    1.596002] bus: 'platform': add driver tc35892-gpio
[    1.600054] initcall tc35892_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    1.608003] calling  wm8994_gpio_init+0x0/0xf @ 1
[    1.612002] bus: 'platform': add driver wm8994-gpio
[    1.616054] initcall wm8994_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    1.624005] calling  pci_slot_init+0x0/0x3b @ 1
[    1.628009] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs
[    1.636003] calling  fbmem_init+0x0/0x80 @ 1
[    1.640013] device class 'graphics': registering
[    1.644053] initcall fbmem_init+0x0/0x80 returned 0 after 3906 usecs
[    1.648003] calling  pnp_init+0x0/0xf @ 1
[    1.652060] bus: 'pnp': registered
[    1.656003] initcall pnp_init+0x0/0xf returned 0 after 3906 usecs
[    1.664003] calling  max1586_pmic_init+0x0/0x11 @ 1
[    1.668002] bus: 'i2c': add driver max1586
[    1.672066] i2c-core: driver [max1586] registered
[    1.676004] initcall max1586_pmic_init+0x0/0x11 returned 0 after 7812 usecs
[    1.684003] calling  max8660_init+0x0/0x11 @ 1
[    1.688002] bus: 'i2c': add driver max8660
[    1.692052] i2c-core: driver [max8660] registered
[    1.696004] initcall max8660_init+0x0/0x11 returned 0 after 7812 usecs
[    1.704003] calling  max8925_regulator_init+0x0/0xf @ 1
[    1.708002] bus: 'platform': add driver max8925-regulator
[    1.716054] initcall max8925_regulator_init+0x0/0xf returned 0 after 7812 usecs
[    1.720003] calling  wm831x_dcdc_init+0x0/0x73 @ 1
[    1.728002] bus: 'platform': add driver wm831x-buckv
[    1.732052] bus: 'platform': add driver wm831x-buckp
[    1.736062] bus: 'platform': add driver wm831x-boostp
[    1.740053] bus: 'platform': add driver wm831x-epe
[    1.748055] initcall wm831x_dcdc_init+0x0/0x73 returned 0 after 19531 usecs
[    1.752003] calling  wm831x_isink_init+0x0/0x28 @ 1
[    1.760002] bus: 'platform': add driver wm831x-isink
[    1.764054] initcall wm831x_isink_init+0x0/0x28 returned 0 after 3906 usecs
[    1.772003] calling  wm831x_ldo_init+0x0/0x58 @ 1
[    1.776002] bus: 'platform': add driver wm831x-ldo
[    1.780052] bus: 'platform': add driver wm831x-aldo
[    1.784052] bus: 'platform': add driver wm831x-alive-ldo
[    1.792054] initcall wm831x_ldo_init+0x0/0x58 returned 0 after 15625 usecs
[    1.796003] calling  da903x_regulator_init+0x0/0xf @ 1
[    1.804002] bus: 'platform': add driver da903x-regulator
[    1.808054] initcall da903x_regulator_init+0x0/0xf returned 0 after 3906 usecs
[    1.816007] calling  tps_65023_init+0x0/0x11 @ 1
[    1.820002] bus: 'i2c': add driver tps65023
[    1.824052] i2c-core: driver [tps65023] registered
[    1.828004] initcall tps_65023_init+0x0/0x11 returned 0 after 7812 usecs
[    1.836003] calling  tps6507x_pmic_init+0x0/0xf @ 1
[    1.840002] bus: 'platform': add driver tps6507x-pmic
[    1.844054] initcall tps6507x_pmic_init+0x0/0xf returned 0 after 3906 usecs
[    1.852003] calling  misc_init+0x0/0x9b @ 1
[    1.856007] device class 'misc': registering
[    1.860055] initcall misc_init+0x0/0x9b returned 0 after 3906 usecs
[    1.868003] calling  tifm_init+0x0/0x6f @ 1
[    1.872071] bus: 'tifm': registered
[    1.876003] device class 'tifm_adapter': registering
[    1.880062] initcall tifm_init+0x0/0x6f returned 0 after 7812 usecs
[    1.884003] calling  pm860x_i2c_init+0x0/0x2a @ 1
[    1.888004] bus: 'i2c': add driver 88PM860x
[    1.892054] i2c-core: driver [88PM860x] registered
[    1.896004] initcall pm860x_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[    1.900003] calling  tc35892_init+0x0/0x11 @ 1
[    1.904002] bus: 'i2c': add driver tc35892
[    1.908052] i2c-core: driver [tc35892] registered
[    1.912003] initcall tc35892_init+0x0/0x11 returned 0 after 7812 usecs
[    1.916003] calling  wm831x_i2c_init+0x0/0x2a @ 1
[    1.920002] bus: 'i2c': add driver wm831x
[    1.924052] i2c-core: driver [wm831x] registered
[    1.928004] initcall wm831x_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[    1.932002] calling  tps_init+0x0/0xa1 @ 1
[    1.936002] tps65010: version 2 May 2005
[    1.940002] bus: 'i2c': add driver tps65010
[    1.944051] i2c-core: driver [tps65010] registered
[    1.948007] bus: 'i2c': remove driver tps65010
[    1.952049] driver: 'tps65010': driver_release
[    1.956005] i2c-core: driver [tps65010] unregistered
[    1.976005] bus: 'i2c': add driver tps65010
[    1.980052] i2c-core: driver [tps65010] registered
[    1.984006] bus: 'i2c': remove driver tps65010
[    1.988047] driver: 'tps65010': driver_release
[    1.992005] i2c-core: driver [tps65010] unregistered
[    2.012004] bus: 'i2c': add driver tps65010
[    2.016052] i2c-core: driver [tps65010] registered
[    2.020006] bus: 'i2c': remove driver tps65010
[    2.024047] driver: 'tps65010': driver_release
[    2.028005] i2c-core: driver [tps65010] unregistered
[    2.032001] tps65010: no chip?
[    2.036003] initcall tps_init+0x0/0xa1 returned -19 after 97656 usecs
[    2.040003] calling  tps6507x_i2c_init+0x0/0x11 @ 1
[    2.044002] bus: 'i2c': add driver tps6507x
[    2.048052] i2c-core: driver [tps6507x] registered
[    2.052004] initcall tps6507x_i2c_init+0x0/0x11 returned 0 after 7812 usecs
[    2.056003] calling  da903x_init+0x0/0x11 @ 1
[    2.060002] bus: 'i2c': add driver da903x
[    2.064061] i2c-core: driver [da903x] registered
[    2.068004] initcall da903x_init+0x0/0x11 returned 0 after 7812 usecs
[    2.072003] calling  max8925_i2c_init+0x0/0x2a @ 1
[    2.076002] bus: 'i2c': add driver max8925
[    2.080052] i2c-core: driver [max8925] registered
[    2.084004] initcall max8925_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[    2.088003] calling  init_scsi+0x0/0x79 @ 1
[    2.092388] device class 'scsi_host': registering
[    2.096108] bus: 'scsi': registered
[    2.100002] device class 'scsi_device': registering
[    2.104063] SCSI subsystem initialized
[    2.108004] initcall init_scsi+0x0/0x79 returned 0 after 15625 usecs
[    2.112004] calling  ata_init+0x0/0x293 @ 1
[    2.116043] libata version 3.00 loaded.
[    2.120005] initcall ata_init+0x0/0x293 returned 0 after 3906 usecs
[    2.124003] calling  phy_init+0x0/0x2a @ 1
[    2.128002] device class 'mdio_bus': registering
[    2.136122] bus: 'mdio_bus': registered
[    2.140003] bus: 'mdio_bus': add driver Generic PHY
[    2.144055] initcall phy_init+0x0/0x2a returned 0 after 15625 usecs
[    2.148004] calling  init_pcmcia_cs+0x0/0x2d @ 1
[    2.156002] device class 'pcmcia_socket': registering
[    2.160052] initcall init_pcmcia_cs+0x0/0x2d returned 0 after 3906 usecs
[    2.164003] calling  nop_usb_xceiv_init+0x0/0xf @ 1
[    2.172002] bus: 'platform': add driver nop_usb_xceiv
[    2.176054] initcall nop_usb_xceiv_init+0x0/0xf returned 0 after 3906 usecs
[    2.184003] calling  usb_init+0x0/0x136 @ 1
[    2.188070] bus: 'usb': registered
[    2.192016] bus: 'usb': add driver usbfs
[    2.196056] usbcore: registered new interface driver usbfs
[    2.200005] device class 'usb_device': registering
[    2.204050] bus: 'usb': add driver hub
[    2.208054] usbcore: registered new interface driver hub
[    2.216025] bus: 'usb': add driver usb
[    2.219814] usbcore: registered new device driver usb
[    2.220005] initcall usb_init+0x0/0x136 returned 0 after 31250 usecs
[    2.224004] calling  serio_init+0x0/0x73 @ 1
[    2.228069] bus: 'serio': registered
[    2.232042] initcall serio_init+0x0/0x73 returned 0 after 3906 usecs
[    2.240003] calling  gameport_init+0x0/0x73 @ 1
[    2.244062] bus: 'gameport': registered
[    2.248042] initcall gameport_init+0x0/0x73 returned 0 after 3906 usecs
[    2.252003] calling  input_init+0x0/0x10f @ 1
[    2.256002] device class 'input': registering
[    2.260072] initcall input_init+0x0/0x10f returned 0 after 3906 usecs
[    2.264003] calling  tca6416_keypad_init+0x0/0x11 @ 1
[    2.268003] bus: 'i2c': add driver tca6416-keypad
[    2.272053] i2c-core: driver [tca6416-keypad] registered
[    2.276003] initcall tca6416_keypad_init+0x0/0x11 returned 0 after 7812 usecs
[    2.280003] calling  rtc_init+0x0/0x5e @ 1
[    2.284002] device class 'rtc': registering
[    2.288051] initcall rtc_init+0x0/0x5e returned 0 after 3906 usecs
[    2.292003] calling  i2c_gpio_init+0x0/0x28 @ 1
[    2.296004] bus: 'platform': add driver i2c-gpio
[    2.300056] initcall i2c_gpio_init+0x0/0x28 returned 0 after 3906 usecs
[    2.304003] calling  pps_init+0x0/0x92 @ 1
[    2.308002] device class 'pps': registering
[    2.312049] LinuxPPS API ver. 1 registered
[    2.316004] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.320003] initcall pps_init+0x0/0x92 returned 0 after 11718 usecs
[    2.324003] calling  power_supply_class_init+0x0/0x39 @ 1
[    2.328002] device class 'power_supply': registering
[    2.332051] initcall power_supply_class_init+0x0/0x39 returned 0 after 3906 usecs
[    2.336003] calling  hwmon_init+0x0/0xf3 @ 1
[    2.340003] device class 'hwmon': registering
[    2.344050] initcall hwmon_init+0x0/0xf3 returned 0 after 3906 usecs
[    2.348003] calling  thermal_init+0x0/0x46 @ 1
[    2.352002] device class 'thermal': registering
[    2.356062] initcall thermal_init+0x0/0x46 returned 0 after 3906 usecs
[    2.360004] calling  raid6_select_algo+0x0/0x16e @ 1
[    2.432065] raid6: int32x1    852 MB/s
[    2.500049] raid6: int32x2   1048 MB/s
[    2.568030] raid6: int32x4    565 MB/s
[    2.636050] raid6: int32x8    417 MB/s
[    2.704003] raid6: mmxx1     1666 MB/s
[    2.772010] raid6: mmxx2     2879 MB/s
[    2.840026] raid6: sse1x1    1495 MB/s
[    2.908019] raid6: sse1x2    2153 MB/s
[    2.976004] raid6: sse2x1    2558 MB/s
[    3.044015] raid6: sse2x2    3026 MB/s
[    3.047762] raid6: using algorithm sse2x2 (3026 MB/s)
[    3.048008] initcall raid6_select_algo+0x0/0x16e returned 0 after 667968 usecs
[    3.052003] calling  md_init+0x0/0xb7 @ 1
[    3.056013] initcall md_init+0x0/0xb7 returned 0 after 0 usecs
[    3.060003] calling  leds_init+0x0/0x3d @ 1
[    3.064002] device class 'leds': registering
[    3.068052] initcall leds_init+0x0/0x3d returned 0 after 3906 usecs
[    3.072003] calling  init_soundcore+0x0/0x83 @ 1
[    3.076006] device class 'sound': registering
[    3.080050] initcall init_soundcore+0x0/0x83 returned 0 after 3906 usecs
[    3.084003] calling  pci_subsys_init+0x0/0x44 @ 1
[    3.088002] PCI: Probing PCI hardware
[    3.092003] PCI: Probing PCI hardware (bus 00)
[    3.096010] device: 'pci0000:00': device_add
[    3.100020] PM: Adding info for No Bus:pci0000:00
[    3.104006] device: '0000:00': device_add
[    3.108017] PM: Adding info for No Bus:0000:00
[    3.112049] pci_bus 0000:00: scanning bus
[    3.116072] pci 0000:00:00.0: found [10de:005e] class 000580 header type 00
[    3.120282] pci 0000:00:01.0: found [10de:0050] class 000601 header type 00
[    3.124177] pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00
[    3.128042] pci 0000:00:01.1: reg 10: [io  0xdc00-0xdc1f]
[    3.132064] pci 0000:00:01.1: reg 20: [io  0x4c00-0x4c3f]
[    3.136018] pci 0000:00:01.1: reg 24: [io  0x4c40-0x4c7f]
[    3.140074] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    3.144012] pci 0000:00:01.1: PME# disabled
[    3.148078] pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00
[    3.152042] pci 0000:00:02.0: reg 10: [mem 0xda102000-0xda102fff]
[    3.156151] pci 0000:00:02.0: supports D1 D2
[    3.160002] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.164011] pci 0000:00:02.0: PME# disabled
[    3.168060] pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00
[    3.172050] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
[    3.176176] pci 0000:00:02.1: supports D1 D2
[    3.180002] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    3.184012] pci 0000:00:02.1: PME# disabled
[    3.188091] pci 0000:00:04.0: found [10de:0059] class 000401 header type 00
[    3.192041] pci 0000:00:04.0: reg 10: [io  0xd400-0xd4ff]
[    3.196018] pci 0000:00:04.0: reg 14: [io  0xd800-0xd8ff]
[    3.200018] pci 0000:00:04.0: reg 18: [mem 0xda101000-0xda101fff]
[    3.204120] pci 0000:00:04.0: supports D1 D2
[    3.208056] pci 0000:00:06.0: found [10de:0053] class 000101 header type 00
[    3.212100] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    3.216140] pci 0000:00:09.0: found [10de:005c] class 000604 header type 01
[    3.220110] pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00
[    3.224041] pci 0000:00:0a.0: reg 10: [mem 0xda100000-0xda100fff]
[    3.228018] pci 0000:00:0a.0: reg 14: [io  0xd000-0xd007]
[    3.232135] pci 0000:00:0a.0: supports D1 D2
[    3.236003] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.240011] pci 0000:00:0a.0: PME# disabled
[    3.244075] pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01
[    3.248190] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.252011] pci 0000:00:0b.0: PME# disabled
[    3.256098] pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01
[    3.260189] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.264011] pci 0000:00:0c.0: PME# disabled
[    3.268098] pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01
[    3.272190] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.276011] pci 0000:00:0d.0: PME# disabled
[    3.280097] pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01
[    3.284190] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.288011] pci 0000:00:0e.0: PME# disabled
[    3.292113] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00
[    3.296202] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00
[    3.300179] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00
[    3.304157] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00
[    3.308182] pci_bus 0000:00: fixups for bus
[    3.312002] PCI: peer root bus 00 res updated from pci conf
[    3.316002] Clocksource tsc unstable (delta = 116003322 ns)
[    3.320024] pci 0000:00:09.0: scanning [bus 05-05] behind bridge, pass 0
[    3.328028] pci_bus 0000:05: scanning bus
[    3.332067] pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00
[    3.336044] pci 0000:05:07.0: reg 10: [io  0xc000-0xc0ff]
[    3.340019] pci 0000:05:07.0: reg 14: [mem 0xda000000-0xda0000ff]
[    3.344142] pci 0000:05:07.0: supports D1 D2
[    3.348002] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
[    3.352012] pci 0000:05:07.0: PME# disabled
[    3.356121] pci_bus 0000:05: fixups for bus
[    3.360002] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
[    3.364010] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
[    3.368010] pci 0000:00:09.0:   bridge window [mem 0xda000000-0xda0fffff]
[    3.372010] pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.376003] pci 0000:00:09.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    3.380003] pci 0000:00:09.0:   bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[    3.384003] pci 0000:00:09.0:   bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
[    3.388003] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    3.392002] pci_bus 0000:05: bus scan returning with max=05
[    3.396012] pci 0000:00:0b.0: scanning [bus 04-04] behind bridge, pass 0
[    3.400188] pci_bus 0000:04: scanning bus
[    3.404007] pci_bus 0000:04: fixups for bus
[    3.408002] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    3.412018] pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)
[    3.416010] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    3.420018] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.424002] pci_bus 0000:04: bus scan returning with max=04
[    3.428012] pci 0000:00:0c.0: scanning [bus 03-03] behind bridge, pass 0
[    3.432175] pci_bus 0000:03: scanning bus
[    3.436006] pci_bus 0000:03: fixups for bus
[    3.440002] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    3.444018] pci 0000:00:0c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    3.448010] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    3.452018] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.456002] pci_bus 0000:03: bus scan returning with max=03
[    3.460012] pci 0000:00:0d.0: scanning [bus 02-02] behind bridge, pass 0
[    3.464174] pci_bus 0000:02: scanning bus
[    3.468006] pci_bus 0000:02: fixups for bus
[    3.472002] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    3.476018] pci 0000:00:0d.0:   bridge window [io  0xf000-0x0000] (disabled)
[    3.480010] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    3.484018] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    3.488002] pci_bus 0000:02: bus scan returning with max=02
[    3.492013] pci 0000:00:0e.0: scanning [bus 01-01] behind bridge, pass 0
[    3.496174] pci_bus 0000:01: scanning bus
[    3.500045] pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00
[    3.504028] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[    3.508018] pci 0000:01:00.0: reg 14: [io  0xb000-0xb0ff]
[    3.512018] pci 0000:01:00.0: reg 18: [mem 0xd9000000-0xd900ffff]
[    3.516067] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    3.520081] pci 0000:01:00.0: supports D1 D2
[    3.524078] pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00
[    3.528023] pci 0000:01:00.1: reg 10: [mem 0xd9010000-0xd901ffff]
[    3.532170] pci 0000:01:00.1: supports D1 D2
[    3.536052] pci_bus 0000:01: fixups for bus
[    3.540002] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    3.544018] pci 0000:00:0e.0:   bridge window [io  0xb000-0xbfff]
[    3.548010] pci 0000:00:0e.0:   bridge window [mem 0xd8000000-0xd9ffffff]
[    3.552018] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    3.556002] pci_bus 0000:01: bus scan returning with max=01
[    3.560012] pci 0000:00:09.0: scanning [bus 05-05] behind bridge, pass 1
[    3.564021] pci 0000:00:0b.0: scanning [bus 04-04] behind bridge, pass 1
[    3.568021] pci 0000:00:0c.0: scanning [bus 03-03] behind bridge, pass 1
[    3.572021] pci 0000:00:0d.0: scanning [bus 02-02] behind bridge, pass 1
[    3.576021] pci 0000:00:0e.0: scanning [bus 01-01] behind bridge, pass 1
[    3.580016] pci_bus 0000:00: bus scan returning with max=05
[    3.584003] device: '0000:00:00.0': device_add
[    3.588006] bus: 'pci': add device 0000:00:00.0
[    3.592036] PM: Adding info for pci:0000:00:00.0
[    3.596056] device: '0000:00:01.0': device_add
[    3.600005] bus: 'pci': add device 0000:00:01.0
[    3.604042] PM: Adding info for pci:0000:00:01.0
[    3.608053] device: '0000:00:01.1': device_add
[    3.612005] bus: 'pci': add device 0000:00:01.1
[    3.616032] PM: Adding info for pci:0000:00:01.1
[    3.620052] device: '0000:00:02.0': device_add
[    3.624014] bus: 'pci': add device 0000:00:02.0
[    3.628033] PM: Adding info for pci:0000:00:02.0
[    3.632052] device: '0000:00:02.1': device_add
[    3.636005] bus: 'pci': add device 0000:00:02.1
[    3.640042] PM: Adding info for pci:0000:00:02.1
[    3.644060] device: '0000:00:04.0': device_add
[    3.648006] bus: 'pci': add device 0000:00:04.0
[    3.652033] PM: Adding info for pci:0000:00:04.0
[    3.656052] device: '0000:00:06.0': device_add
[    3.660005] bus: 'pci': add device 0000:00:06.0
[    3.664042] PM: Adding info for pci:0000:00:06.0
[    3.668052] device: '0000:00:09.0': device_add
[    3.672006] bus: 'pci': add device 0000:00:09.0
[    3.676033] PM: Adding info for pci:0000:00:09.0
[    3.680051] device: '0000:00:0a.0': device_add
[    3.684006] bus: 'pci': add device 0000:00:0a.0
[    3.688042] PM: Adding info for pci:0000:00:0a.0
[    3.692052] device: '0000:00:0b.0': device_add
[    3.696006] bus: 'pci': add device 0000:00:0b.0
[    3.700033] PM: Adding info for pci:0000:00:0b.0
[    3.704051] device: '0000:00:0c.0': device_add
[    3.708015] bus: 'pci': add device 0000:00:0c.0
[    3.712033] PM: Adding info for pci:0000:00:0c.0
[    3.716052] device: '0000:00:0d.0': device_add
[    3.720006] bus: 'pci': add device 0000:00:0d.0
[    3.724042] PM: Adding info for pci:0000:00:0d.0
[    3.728052] device: '0000:00:0e.0': device_add
[    3.732006] bus: 'pci': add device 0000:00:0e.0
[    3.736033] PM: Adding info for pci:0000:00:0e.0
[    3.740051] device: '0000:00:18.0': device_add
[    3.744006] bus: 'pci': add device 0000:00:18.0
[    3.748043] PM: Adding info for pci:0000:00:18.0
[    3.752052] device: '0000:00:18.1': device_add
[    3.756006] bus: 'pci': add device 0000:00:18.1
[    3.760033] PM: Adding info for pci:0000:00:18.1
[    3.764051] device: '0000:00:18.2': device_add
[    3.768006] bus: 'pci': add device 0000:00:18.2
[    3.772046] PM: Adding info for pci:0000:00:18.2
[    3.776052] device: '0000:00:18.3': device_add
[    3.780006] bus: 'pci': add device 0000:00:18.3
[    3.784033] PM: Adding info for pci:0000:00:18.3
[    3.788052] device: '0000:05:07.0': device_add
[    3.792014] bus: 'pci': add device 0000:05:07.0
[    3.796044] PM: Adding info for pci:0000:05:07.0
[    3.800053] device: '0000:05': device_add
[    3.804018] PM: Adding info for No Bus:0000:05
[    3.808053] device: '0000:04': device_add
[    3.812018] PM: Adding info for No Bus:0000:04
[    3.816052] device: '0000:03': device_add
[    3.820027] PM: Adding info for No Bus:0000:03
[    3.824053] device: '0000:02': device_add
[    3.828017] PM: Adding info for No Bus:0000:02
[    3.832052] device: '0000:01:00.0': device_add
[    3.836006] bus: 'pci': add device 0000:01:00.0
[    3.840035] PM: Adding info for pci:0000:01:00.0
[    3.844052] device: '0000:01:00.1': device_add
[    3.848015] bus: 'pci': add device 0000:01:00.1
[    3.852035] PM: Adding info for pci:0000:01:00.1
[    3.856053] device: '0000:01': device_add
[    3.860018] PM: Adding info for No Bus:0000:01
[    3.864329] pci 0000:00:00.0: default IRQ router [10de:005e]
[    3.868011] pci 0000:00:01.1: ignoring bogus IRQ 255
[    3.872004] pci 0000:00:02.0: ignoring bogus IRQ 255
[    3.876004] pci 0000:00:02.1: ignoring bogus IRQ 255
[    3.880036] PCI: pci_cache_line_size set to 64 bytes
[    3.884025] pci 0000:00:01.1: BAR 0: reserving [io  0xdc00-0xdc1f flags 0x40101] (d=0, p=0)
[    3.888003] pci 0000:00:01.1: BAR 4: reserving [io  0x4c00-0x4c3f flags 0x40101] (d=0, p=0)
[    3.892003] pci 0000:00:01.1: BAR 5: reserving [io  0x4c40-0x4c7f flags 0x40101] (d=0, p=0)
[    3.896009] pci 0000:00:02.0: BAR 0: reserving [mem 0xda102000-0xda102fff flags 0x40200] (d=0, p=0)
[    3.900009] pci 0000:00:02.1: BAR 0: reserving [mem 0xfeb00000-0xfeb000ff flags 0x40200] (d=0, p=0)
[    3.904003] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
[    3.908009] pci 0000:00:04.0: BAR 0: reserving [io  0xd400-0xd4ff flags 0x40101] (d=0, p=0)
[    3.912003] pci 0000:00:04.0: BAR 1: reserving [io  0xd800-0xd8ff flags 0x40101] (d=0, p=0)
[    3.916003] pci 0000:00:04.0: BAR 2: reserving [mem 0xda101000-0xda101fff flags 0x40200] (d=0, p=0)
[    3.920009] pci 0000:00:06.0: BAR 0: reserving [io  0x01f0-0x01f7 flags 0x110] (d=0, p=0)
[    3.924003] pci 0000:00:06.0: BAR 1: reserving [io  0x03f6 flags 0x110] (d=0, p=0)
[    3.928003] pci 0000:00:06.0: BAR 2: reserving [io  0x0170-0x0177 flags 0x110] (d=0, p=0)
[    3.932003] pci 0000:00:06.0: BAR 3: reserving [io  0x0376 flags 0x110] (d=0, p=0)
[    3.936003] pci 0000:00:06.0: BAR 4: reserving [io  0xf000-0xf00f flags 0x40101] (d=0, p=0)
[    3.940015] pci 0000:00:0a.0: BAR 0: reserving [mem 0xda100000-0xda100fff flags 0x40200] (d=0, p=0)
[    3.944003] pci 0000:00:0a.0: BAR 1: reserving [io  0xd000-0xd007 flags 0x40101] (d=0, p=0)
[    3.948058] pci 0000:05:07.0: BAR 0: reserving [io  0xc000-0xc0ff flags 0x40101] (d=0, p=0)
[    3.952003] pci 0000:05:07.0: BAR 1: reserving [mem 0xda000000-0xda0000ff flags 0x40200] (d=0, p=0)
[    3.956009] pci 0000:01:00.0: BAR 0: reserving [mem 0xd0000000-0xd7ffffff flags 0x42208] (d=0, p=0)
[    3.960003] pci 0000:01:00.0: BAR 1: reserving [io  0xb000-0xb0ff flags 0x40101] (d=0, p=0)
[    3.964003] pci 0000:01:00.0: BAR 2: reserving [mem 0xd9000000-0xd900ffff flags 0x40200] (d=0, p=0)
[    3.968135] pci 0000:01:00.1: BAR 0: reserving [mem 0xd9010000-0xd901ffff flags 0x40200] (d=1, p=1)
[    3.972006] Expanded resource reserved due to conflict with PCI Bus #00
[    3.976002] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    3.980004] reserve RAM buffer: 000000003fff0000 - 000000003fffffff initcall pci_subsys_init+0x0/0x44 returned 0 after 875000 usecs
[    3.988003] calling  proto_init+0x0/0xf @ 1
[    3.992018] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[    3.996003] calling  net_dev_init+0x0/0x1cd @ 1
[    4.000019] device class 'net': registering
[    4.008054] device: 'lo': device_add
[    4.011704] PM: Adding info for No Bus:lo
[    4.012143] initcall net_dev_init+0x0/0x1cd returned 0 after 11718 usecs
[    4.016003] calling  neigh_init+0x0/0x66 @ 1
[    4.020003] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs
[    4.024003] calling  fib_rules_init+0x0/0x99 @ 1
[    4.028004] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs
[    4.032003] calling  genl_init+0x0/0x77 @ 1
[    4.036058] initcall genl_init+0x0/0x77 returned 0 after 0 usecs
[    4.040003] calling  cipso_v4_init+0x0/0x6b @ 1
[    4.044024] initcall cipso_v4_init+0x0/0x6b returned 0 after 0 usecs
[    4.048003] calling  wanrouter_init+0x0/0x42 @ 1
[    4.052002] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[    4.056015] initcall wanrouter_init+0x0/0x42 returned 0 after 3906 usecs
[    4.060002] calling  bt_init+0x0/0x4f @ 1
[    4.064002] Bluetooth: Core ver 2.15
[    4.068014] device class 'bluetooth': registering
[    4.072061] NET: Registered protocol family 31
[    4.076002] Bluetooth: HCI device and connection manager initialized
[    4.080003] Bluetooth: HCI socket layer initialized
[    4.084003] initcall bt_init+0x0/0x4f returned 0 after 19531 usecs
[    4.088002] calling  atm_init+0x0/0xbc @ 1
[    4.092002] NET: Registered protocol family 8
[    4.096002] NET: Registered protocol family 20
[    4.100021] device class 'atm': registering
[    4.104051] initcall atm_init+0x0/0xbc returned 0 after 11718 usecs
[    4.108003] calling  wireless_nlevent_init+0x0/0xf @ 1
[    4.112004] initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs
[    4.116003] calling  netlbl_init+0x0/0x6d @ 1
[    4.120001] NetLabel: Initializing
[    4.124002] NetLabel:  domain hash size = 128
[    4.128001] NetLabel:  protocols = UNLABELED CIPSOv4
[    4.132134] NetLabel:  unlabeled traffic allowed by default
[    4.136003] initcall netlbl_init+0x0/0x6d returned 0 after 15625 usecs
[    4.140003] calling  rfkill_init+0x0/0x66 @ 1
[    4.144002] device class 'rfkill': registering
[    4.148054] device: 'rfkill': device_add
[    4.152015] PM: Adding info for No Bus:rfkill
[    4.160023] initcall rfkill_init+0x0/0x66 returned 0 after 15625 usecs
[    4.164003] calling  wpan_phy_class_init+0x0/0x33 @ 1
[    4.168002] device class 'ieee802154': registering
[    4.172166] initcall wpan_phy_class_init+0x0/0x33 returned 0 after 3906 usecs
[    4.176004] calling  print_ICs+0x0/0x46d @ 1
[    4.180002] 
[    4.180002] printing PIC contents
[    4.184003] ... PIC  IMR: fffa
[    4.187057] ... PIC  IRR: 0001
[    4.188001] ... PIC  ISR: 0001
[    4.192003] ... PIC ELCR: 0828
[    4.196003] printing local APIC contents on CPU#0/0:
[    4.200000] ... APIC ID:      00000000 (0)
[    4.200000] ... APIC VERSION: 00040010
[    4.200000] ... APIC TASKPRI: 00000000 (00)
[    4.200000] ... APIC ARBPRI: 000000e0 (e0)
[    4.200000] ... APIC PROCPRI: 00000000
[    4.200000] ... APIC LDR: 01000000
[    4.200000] ... APIC DFR: ffffffff
[    4.200000] ... APIC SPIV: 000001ff
[    4.200000] ... APIC ISR field:
[    4.200000] 0000000000000000000000000000000000000000000000000000000000000000
[    4.200000] ... APIC TMR field:
[    4.200000] 0000000000000000000000000000000000000000000000000000000000000000
[    4.200000] ... APIC IRR field:
[    4.200000] 0000000000000000000000000000000000000000000000000000000000008000
[    4.200000] ... APIC ESR: 00000000
[    4.200000] ... APIC ICR: 000008fd
[    4.200000] ... APIC ICR2: 02000000
[    4.200000] ... APIC LVTT: 000200ef
[    4.200000] ... APIC LVTPC: 00000400
[    4.200000] ... APIC LVT0: 00010700
[    4.200000] ... APIC LVT1: 00000400
[    4.200000] ... APIC LVTERR: 000000fe
[    4.200000] ... APIC TMICT: 0000c454
[    4.200000] ... APIC TMCCT: 0000465c
[    4.200000] ... APIC TDCR: 00000003
[    4.200000] 
[    4.200002] number of MP IRQ sources: 17.
[    4.204002] number of IO-APIC #2 registers: 24.
[    4.208001] testing the IO APIC.......................
[    4.212004] 
[    4.213498] IO APIC #2......
[    4.216001] .... register #00: 00000000
[    4.220001] .......    : physical APIC id: 00
[    4.224001] .......    : Delivery Type: 0
[    4.228001] .......    : LTS          : 0
[    4.232001] .... register #01: 00170011
[    4.236002] .......     : max redirection entries: 0017
[    4.240001] .......     : PRQ implemented: 0
[    4.244001] .......     : IO APIC version: 0011
[    4.248001] .... register #02: 00000000
[    4.252001] .......     : arbitration: 00
[    4.256001] .... IRQ redirection table:
[    4.260002]  NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
[    4.264004]  00 003 0    0    0   0   0    1    1    30
[    4.268003]  01 003 0    0    0   0   0    1    1    31
[    4.272003]  02 000 1    0    0   0   0    0    0    00
[    4.280003]  03 003 1    1    0   1   0    1    1    29
[    4.284003]  04 003 0    0    0   0   0    1    1    34
[    4.288003]  05 003 1    1    0   1   0    1    1    41
[    4.295230]  06 003 0    0    0   0   0    1    1    36
[    4.300003]  07 003 1    0    0   0   0    1    1    37
[    4.304003]  08 003 0    0    0   0   0    1    1    38
[    4.311232]  09 003 0    0    0   0   0    1    1    39
[    4.316006]  0a 003 0    0    0   0   0    1    1    3A
[    4.320003]  0b 003 1    1    0   1   0    1    1    49
[    4.327232]  0c 003 0    0    0   0   0    1    1    3C
[    4.332003]  0d 003 0    0    0   0   0    1    1    3D
[    4.336003]  0e 003 0    0    0   0   0    1    1    3E
[    4.340003]  0f 003 0    0    0   0   0    1    1    3F
[    4.348003]  10 000 1    0    0   0   0    0    0    00
[    4.352003]  11 000 1    0    0   0   0    0    0    00
[    4.356003]  12 000 1    0    0   0   0    0    0    00
[    4.364003]  13 000 1    0    0   0   0    0    0    00
[    4.368003]  14 000 1    0    0   0   0    0    0    00
[    4.372003]  15 000 1    0    0   0   0    0    0    00
[    4.379232]  16 000 1    0    0   0   0    0    0    00
[    4.384003]  17 000 1    0    0   0   0    0    0    00
[    4.388001] IRQ to pin mappings:
[    4.392002] IRQ0 -> 0:0
[    4.396001] IRQ1 -> 0:1
[    4.398476] IRQ4 -> 0:4
[    4.400736] IRQ6 -> 0:6
[    4.403213] IRQ7 -> 0:7
[    4.404728] IRQ8 -> 0:8
[    4.408190] IRQ9 -> 0:9
[    4.410667] IRQ10 -> 0:10
[    4.412815] IRQ12 -> 0:12
[    4.416197] IRQ13 -> 0:13
[    4.418847] IRQ14 -> 0:14
[    4.420815] IRQ15 -> 0:15
[    4.424200] IRQ29 -> 0:3
[    4.426770] IRQ31 -> 0:5
[    4.428728] IRQ37 -> 0:11
[    4.432098] .................................... done.
[    4.436003] initcall print_ICs+0x0/0x46d returned 0 after 250000 usecs
[    4.440003] calling  hpet_late_init+0x0/0xef @ 1
[    4.444003] initcall hpet_late_init+0x0/0xef returned -19 after 0 usecs
[    4.448003] calling  init_k8_nbs+0x0/0x21 @ 1
[    4.452097] initcall init_k8_nbs+0x0/0x21 returned 0 after 0 usecs
[    4.456004] calling  clocksource_done_booting+0x0/0x4f @ 1
[    4.460006] initcall clocksource_done_booting+0x0/0x4f returned 0 after 0 usecs
[    4.464003] calling  rb_init_debugfs+0x0/0x27 @ 1
[    4.468016] initcall rb_init_debugfs+0x0/0x27 returned 0 after 0 usecs
[    4.472003] calling  tracer_init_debugfs+0x0/0x306 @ 1
[    4.476309] initcall tracer_init_debugfs+0x0/0x306 returned 0 after 0 usecs
[    4.480003] calling  init_trace_printk_function_export+0x0/0x2a @ 1
[    4.484008] initcall init_trace_printk_function_export+0x0/0x2a returned 0 after 0 usecs
[    4.488003] calling  stat_workqueue_init+0x0/0x27 @ 1
[    4.492022] initcall stat_workqueue_init+0x0/0x27 returned 0 after 0 usecs
[    4.496003] calling  event_trace_init+0x0/0x17a @ 1
[    4.549868] initcall event_trace_init+0x0/0x17a returned 0 after 46875 usecs
[    4.552005] calling  init_pipe_fs+0x0/0x3d @ 1
[    4.556035] initcall init_pipe_fs+0x0/0x3d returned 0 after 0 usecs
[    4.560003] calling  anon_inode_init+0x0/0xf2 @ 1
[    4.564024] initcall anon_inode_init+0x0/0xf2 returned 0 after 0 usecs
[    4.568003] calling  fscache_init+0x0/0x96 @ 1
[    4.572002] Slow work thread pool: Starting up
[    4.580025] Slow work thread pool: Ready
[    4.583926] FS-Cache: Loaded
[    4.584004] initcall fscache_init+0x0/0x96 returned 0 after 11718 usecs
[    4.592004] calling  cachefiles_init+0x0/0x8e @ 1
[    4.596015] device: 'cachefiles': device_add
[    4.600025] PM: Adding info for No Bus:cachefiles
[    4.604063] CacheFiles: Loaded
[    4.608004] initcall cachefiles_init+0x0/0x8e returned 0 after 11718 usecs
[    4.616003] calling  tomoyo_initerface_init+0x0/0x112 @ 1
[    4.620077] initcall tomoyo_initerface_init+0x0/0x112 returned 0 after 0 usecs
[    4.628003] calling  blk_scsi_ioctl_init+0x0/0x288 @ 1
[    4.632003] initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 0 usecs
[    4.640004] calling  pnp_system_init+0x0/0xf @ 1
[    4.644002] bus: 'pnp': add driver system
[    4.648055] initcall pnp_system_init+0x0/0xf returned 0 after 3906 usecs
[    4.656003] calling  chr_dev_init+0x0/0xaf @ 1
[    4.660011] device class 'mem': registering
[    4.664054] device: 'mem': device_add
[    4.668014] PM: Adding info for No Bus:mem
[    4.672049] device: 'kmem': device_add
[    4.676013] PM: Adding info for No Bus:kmem
[    4.680048] device: 'null': device_add
[    4.684013] PM: Adding info for No Bus:null
[    4.688062] device: 'port': device_add
[    4.692014] PM: Adding info for No Bus:port
[    4.696058] device: 'zero': device_add
[    4.700023] PM: Adding info for No Bus:zero
[    4.704053] device: 'full': device_add
[    4.708013] PM: Adding info for No Bus:full
[    4.712050] device: 'random': device_add
[    4.716013] PM: Adding info for No Bus:random
[    4.720049] device: 'urandom': device_add
[    4.724013] PM: Adding info for No Bus:urandom
[    4.728049] device: 'kmsg': device_add
[    4.732014] PM: Adding info for No Bus:kmsg
[    4.736050] device: 'oldmem': device_add
[    4.740024] PM: Adding info for No Bus:oldmem
[    4.744049] initcall chr_dev_init+0x0/0xaf returned 0 after 82031 usecs
[    4.752003] calling  firmware_class_init+0x0/0x14 @ 1
[    4.756002] device class 'firmware': registering
[    4.760071] initcall firmware_class_init+0x0/0x14 returned 0 after 3906 usecs
[    4.768005] calling  cpufreq_gov_performance_init+0x0/0xf @ 1
[    4.776005] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 usecs
[    4.780003] calling  cpufreq_gov_dbs_init+0x0/0x9f @ 1
[    4.788042] initcall cpufreq_gov_dbs_init+0x0/0x9f returned 0 after 0 usecs
[    4.796004] calling  ssb_modinit+0x0/0x4d @ 1
[    4.800082] bus: 'ssb': registered
[    4.803483] initcall ssb_modinit+0x0/0x4d returned 0 after 0 usecs
[    4.808003] calling  pcibios_assign_resources+0x0/0x66 @ 1
[    4.812176] pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x400000ff]
[    4.820012] pci 0000:00:02.1: BAR 0: set to [mem 0x40000000-0x400000ff] (PCI address [0x40000000-0x400000ff]
[    4.832006] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[    4.836006] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]
[    4.840014] pci 0000:00:09.0:   bridge window [mem 0xda000000-0xda0fffff]
[    4.848009] pci 0000:00:09.0:   bridge window [mem pref disabled]
[    4.856019] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    4.860002] pci 0000:00:0b.0:   bridge window [io  disabled]
[    4.864013] pci 0000:00:0b.0:   bridge window [mem disabled]
[    4.872009] pci 0000:00:0b.0:   bridge window [mem pref disabled]
[    4.876019] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    4.884002] pci 0000:00:0c.0:   bridge window [io  disabled]
[    4.888013] pci 0000:00:0c.0:   bridge window [mem disabled]
[    4.892009] pci 0000:00:0c.0:   bridge window [mem pref disabled]
[    4.900019] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    4.904002] pci 0000:00:0d.0:   bridge window [io  disabled]
[    4.912013] pci 0000:00:0d.0:   bridge window [mem disabled]
[    4.916009] pci 0000:00:0d.0:   bridge window [mem pref disabled]
[    4.924021] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
[    4.928005] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    4.936006] pci 0000:00:0e.0:   bridge window [io  0xb000-0xbfff]
[    4.940013] pci 0000:00:0e.0:   bridge window [mem 0xd8000000-0xd9ffffff]
[    4.948010] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[    4.956037] pci 0000:00:09.0: setting latency timer to 64
[    4.960036] pci 0000:00:0b.0: setting latency timer to 64
[    4.968036] pci 0000:00:0c.0: setting latency timer to 64
[    4.972036] pci 0000:00:0d.0: setting latency timer to 64
[    4.976036] pci 0000:00:0e.0: setting latency timer to 64
[    4.984008] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    4.988002] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
[    4.996002] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
[    5.000002] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    5.008003] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    5.012002] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
[    5.020002] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
[    5.024003] pci_bus 0000:05: resource 5 [mem 0x40000000-0xffffffff]
[    5.032002] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
[    5.036002] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[    5.044003] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    5.048002] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
[    5.056003] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[    5.064004] initcall pcibios_assign_resources+0x0/0x66 returned 0 after 246093 usecs
[    5.072004] calling  inet_init+0x0/0x202 @ 1
[    5.076106] NET: Registered protocol family 2
[    5.080051] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    5.088311] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    5.096728] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[    5.104307] TCP: Hash tables configured (established 131072 bind 65536)
[    5.108002] TCP reno registered
[    5.112012] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    5.120023] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    5.124135] initcall inet_init+0x0/0x202 returned 0 after 46875 usecs
[    5.132004] calling  af_unix_init+0x0/0x47 @ 1
[    5.136013] NET: Registered protocol family 1
[    5.140007] initcall af_unix_init+0x0/0x47 returned 0 after 3906 usecs
[    5.148004] calling  populate_rootfs+0x0/0x1c6 @ 1
[    5.152649] initcall populate_rootfs+0x0/0x1c6 returned 0 after 0 usecs
[    5.160005] calling  pci_iommu_init+0x0/0x21 @ 1
[    5.200581] DMA-API: preallocated 32768 debug entries
[    5.204002] DMA-API: debugging enabled by kernel config
[    5.208009] initcall pci_iommu_init+0x0/0x21 returned 0 after 42968 usecs
[    5.216004] calling  i8259A_init_sysfs+0x0/0x1d @ 1
[    5.220002] Registering sysdev class 'i8259'
[    5.224071] Registering sys device of class 'i8259'
[    5.228007] Registering sys device 'i82590'
[    5.236046] initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 15625 usecs
[    5.240003] calling  sbf_init+0x0/0xd8 @ 1
[    5.244003] initcall sbf_init+0x0/0xd8 returned 0 after 0 usecs
[    5.252003] calling  i8237A_init_sysfs+0x0/0x1d @ 1
[    5.256002] Registering sysdev class 'i8237'
[    5.260048] Registering sys device of class 'i8237'
[    5.264007] Registering sys device 'i82370'
[    5.268045] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 11718 usecs
[    5.276004] calling  add_rtc_cmos+0x0/0x87 @ 1
[    5.280010] Registering platform device 'rtc_cmos'. Parent at platform
[    5.288003] device: 'rtc_cmos': device_add
[    5.292011] bus: 'platform': add device rtc_cmos
[    5.296017] PM: Adding info for platform:rtc_cmos
[    5.300055] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    5.308004] initcall add_rtc_cmos+0x0/0x87 returned 0 after 27343 usecs
[    5.316005] calling  cache_sysfs_init+0x0/0x6f @ 1
[    5.320466] initcall cache_sysfs_init+0x0/0x6f returned 0 after 0 usecs
[    5.328004] calling  mcheck_init_device+0x0/0xf5 @ 1
[    5.332004] Registering sysdev class 'machinecheck'
[    5.336048] Registering sys device of class 'machinecheck'
[    5.344005] Registering sys device 'machinecheck0'
[    5.348070] Registering sys device of class 'machinecheck'
[    5.352005] Registering sys device 'machinecheck1'
[    5.356067] device: 'mcelog': device_add
[    5.360017] PM: Adding info for No Bus:mcelog
[    5.364050] initcall mcheck_init_device+0x0/0xf5 returned 0 after 35156 usecs
[    5.372006] calling  inject_init+0x0/0x25 @ 1
[    5.376002] Machine check injector initialized
[    5.380039] initcall inject_init+0x0/0x25 returned 0 after 3906 usecs
[    5.388004] calling  powernow_k6_init+0x0/0x85 @ 1
[    5.392004] initcall powernow_k6_init+0x0/0x85 returned -19 after 0 usecs
[    5.400003] calling  longrun_init+0x0/0x2d @ 1
[    5.404003] initcall longrun_init+0x0/0x2d returned -19 after 0 usecs
[    5.412003] calling  cpufreq_gx_init+0x0/0x18d @ 1
[    5.416004] initcall cpufreq_gx_init+0x0/0x18d returned -19 after 0 usecs
[    5.424003] calling  nforce2_init+0x0/0x5e @ 1
[    5.428010] cpufreq-nforce2: No nForce2 chipset.
[    5.432003] initcall nforce2_init+0x0/0x5e returned -19 after 3906 usecs
[    5.440003] calling  msr_init+0x0/0x15a @ 1
[    5.444008] device class 'msr': registering
[    5.448068] device: 'msr0': device_add
[    5.452014] PM: Adding info for No Bus:msr0
[    5.456054] device: 'msr1': device_add
[    5.460014] PM: Adding info for No Bus:msr1
[    5.464052] initcall msr_init+0x0/0x15a returned 0 after 19531 usecs
[    5.468004] calling  ioapic_init_sysfs+0x0/0x84 @ 1
[    5.472002] Registering sysdev class 'ioapic'
[    5.480058] Registering sys device of class 'ioapic'
[    5.484005] Registering sys device 'ioapic0'
[    5.488046] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 15625 usecs
[    5.496003] calling  add_pcspkr+0x0/0x24 @ 1
[    5.500006] Registering platform device 'pcspkr'. Parent at platform
[    5.504003] device: 'pcspkr': device_add
[    5.508005] bus: 'platform': add device pcspkr
[    5.512012] PM: Adding info for platform:pcspkr
[    5.520049] initcall add_pcspkr+0x0/0x24 returned 0 after 19531 usecs
[    5.524003] calling  scx200_init+0x0/0x20 @ 1
[    5.528001] scx200: NatSemi SCx200 Driver
[    5.532003] bus: 'pci': add driver scx200
[    5.536063] initcall scx200_init+0x0/0x20 returned 0 after 7812 usecs
[    5.544003] calling  microcode_init+0x0/0xf7 @ 1
[    5.548006] Registering platform device 'microcode'. Parent at platform
[    5.556003] device: 'microcode': device_add
[    5.560005] bus: 'platform': add device microcode
[    5.564012] PM: Adding info for platform:microcode
[    5.568002] microcode: microcode: CPU0: AMD CPU family 0xf not supported
[    5.571997] microcode: microcode: CPU1: AMD CPU family 0xf not supported
[    5.576014] device: 'microcode': device_add
[    5.584015] PM: Adding info for No Bus:microcode
[    5.588050] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    5.596004] initcall microcode_init+0x0/0xf7 returned 0 after 46875 usecs
[    5.604004] calling  start_pageattr_test+0x0/0x27 @ 1
[    5.608042] initcall start_pageattr_test+0x0/0x27 returned 0 after 0 usecs
[    5.612004] calling  pt_dump_init+0x0/0x64 @ 1
[    5.616011] initcall pt_dump_init+0x0/0x64 returned 0 after 0 usecs
[    5.620004] calling  init_sched_debug_procfs+0x0/0x27 @ 1
[    5.624012] initcall init_sched_debug_procfs+0x0/0x27 returned 0 after 0 usecs
[    5.628003] calling  proc_schedstat_init+0x0/0x1c @ 1
[    5.632007] initcall proc_schedstat_init+0x0/0x1c returned 0 after 0 usecs
[    5.636003] calling  proc_execdomains_init+0x0/0x1c @ 1
[    5.640007] initcall proc_execdomains_init+0x0/0x1c returned 0 after 0 usecs
[    5.644003] calling  ioresources_init+0x0/0x31 @ 1
[    5.648011] initcall ioresources_init+0x0/0x31 returned 0 after 0 usecs
[    5.652003] calling  uid_cache_init+0x0/0x78 @ 1
[    5.656019] initcall uid_cache_init+0x0/0x78 returned 0 after 0 usecs
[    5.660003] calling  init_posix_timers+0x0/0x14b @ 1
[    5.664011] initcall init_posix_timers+0x0/0x14b returned 0 after 0 usecs
[    5.668003] calling  init_posix_cpu_timers+0x0/0xa2 @ 1
[    5.672003] initcall init_posix_cpu_timers+0x0/0xa2 returned 0 after 0 usecs
[    5.676003] calling  nsproxy_cache_init+0x0/0x27 @ 1
[    5.680009] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 0 usecs
[    5.684005] calling  create_proc_profile+0x0/0x201 @ 1
[    5.688003] initcall create_proc_profile+0x0/0x201 returned 0 after 0 usecs
[    5.692003] calling  timekeeping_init_device+0x0/0x1d @ 1
[    5.696002] Registering sysdev class 'timekeeping'
[    5.700063] Registering sys device of class 'timekeeping'
[    5.704005] Registering sys device 'timekeeping0'
[    5.708049] initcall timekeeping_init_device+0x0/0x1d returned 0 after 11718 usecs
[    5.712003] calling  init_clocksource_sysfs+0x0/0x43 @ 1
[    5.716002] Registering sysdev class 'clocksource'
[    5.720048] Registering sys device of class 'clocksource'
[    5.724005] Registering sys device 'clocksource0'
[    5.728050] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 11718 usecs
[    5.732004] calling  init_timer_list_procfs+0x0/0x27 @ 1
[    5.736008] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 0 usecs
[    5.740003] calling  futex_init+0x0/0x93 @ 1
[    5.744012] initcall futex_init+0x0/0x93 returned 0 after 0 usecs
[    5.748005] calling  init_rttest+0x0/0x107 @ 1
[    5.752002] Registering sysdev class 'rttest'
[    5.756062] Registering sys device of class 'rttest'
[    5.760006] Registering sys device 'rttest0'
[    5.764053] Registering sys device of class 'rttest'
[    5.768007] Registering sys device 'rttest1'
[    5.772053] Registering sys device of class 'rttest'
[    5.776017] Registering sys device 'rttest2'
[    5.780053] Registering sys device of class 'rttest'
[    5.784007] Registering sys device 'rttest3'
[    5.788052] Registering sys device of class 'rttest'
[    5.796008] Registering sys device 'rttest4'
[    5.800052] Registering sys device of class 'rttest'
[    5.804007] Registering sys device 'rttest5'
[    5.808067] Registering sys device of class 'rttest'
[    5.812007] Registering sys device 'rttest6'
[    5.816071] Registering sys device of class 'rttest'
[    5.820007] Registering sys device 'rttest7'
[    5.824050] Initializing RT-Tester: OK
[    5.828004] initcall init_rttest+0x0/0x107 returned 0 after 74218 usecs
[    5.832003] calling  proc_dma_init+0x0/0x1c @ 1
[    5.836008] initcall proc_dma_init+0x0/0x1c returned 0 after 0 usecs
[    5.840003] calling  kallsyms_init+0x0/0x1f @ 1
[    5.844007] initcall kallsyms_init+0x0/0x1f returned 0 after 0 usecs
[    5.848003] calling  snapshot_device_init+0x0/0xf @ 1
[    5.852008] device: 'snapshot': device_add
[    5.856020] PM: Adding info for No Bus:snapshot
[    5.860052] initcall snapshot_device_init+0x0/0xf returned 0 after 7812 usecs
[    5.864004] calling  crash_save_vmcoreinfo_init+0x0/0x37b @ 1
[    5.868028] initcall crash_save_vmcoreinfo_init+0x0/0x37b returned 0 after 0 usecs
[    5.872003] calling  crash_notes_memory_init+0x0/0x31 @ 1
[    5.876006] initcall crash_notes_memory_init+0x0/0x31 returned 0 after 0 usecs
[    5.880003] calling  hung_task_init+0x0/0x42 @ 1
[    5.884025] initcall hung_task_init+0x0/0x42 returned 0 after 0 usecs
[    5.888004] calling  rcuclassic_trace_init+0x0/0xdb @ 1
[    5.892041] initcall rcuclassic_trace_init+0x0/0xdb returned 0 after 0 usecs
[    5.900003] calling  init_lstats_procfs+0x0/0x1f @ 1
[    5.904014] initcall init_lstats_procfs+0x0/0x1f returned 0 after 0 usecs
[    5.912003] calling  init_events+0x0/0x48 @ 1
[    5.916010] initcall init_events+0x0/0x48 returned 0 after 0 usecs
[    5.924003] calling  init_sched_switch_trace+0x0/0xf @ 1
[    5.936006] Testing tracer sched_switch: PASSED
[    6.072716] initcall init_sched_switch_trace+0x0/0xf returned 0 after 140625 usecs
[    6.080003] calling  init_stack_trace+0x0/0xf @ 1
[    6.092003] Testing tracer sysprof: .. no entries found ..FAILED!
[    6.206858] initcall init_stack_trace+0x0/0xf returned -1 after 117187 usecs
[    6.212003] initcall init_stack_trace+0x0/0xf returned with error code -1 
[    6.220003] calling  init_irqsoff_tracer+0x0/0x11 @ 1
[    6.236005] Testing tracer irqsoff: PASSED
[    6.260721] initcall init_irqsoff_tracer+0x0/0x11 returned 0 after 35156 usecs
[    6.268003] calling  init_wakeup_tracer+0x0/0x1d @ 1
[    6.280003] Testing tracer wakeup: 
[    6.616014] ftrace-test used greatest stack depth: 3388 bytes left
[    6.628004] PASSED
[    6.640004] Testing tracer wakeup_rt: PASSED
[    6.984717] initcall init_wakeup_tracer+0x0/0x1d returned 0 after 695312 usecs
[    6.992003] calling  init_ksym_trace+0x0/0x2c @ 1
[    7.008004] Testing tracer ksym_tracer: PASSED
[    7.060719] initcall init_ksym_trace+0x0/0x2c returned 0 after 62500 usecs
[    7.064003] calling  perf_event_sysfs_init+0x0/0x14 @ 1
[    7.072010] initcall perf_event_sysfs_init+0x0/0x14 returned 0 after 0 usecs
[    7.076003] calling  init_per_zone_wmark_min+0x0/0x59 @ 1
[    7.084047] initcall init_per_zone_wmark_min+0x0/0x59 returned 0 after 0 usecs
[    7.092003] calling  kswapd_init+0x0/0x1d @ 1
[    7.096048] initcall kswapd_init+0x0/0x1d returned 0 after 0 usecs
[    7.100003] calling  setup_vmstat+0x0/0xc2 @ 1
[    7.104027] initcall setup_vmstat+0x0/0xc2 returned 0 after 0 usecs
[    7.108003] calling  mm_sysfs_init+0x0/0x22 @ 1
[    7.112009] initcall mm_sysfs_init+0x0/0x22 returned 0 after 0 usecs
[    7.116003] calling  proc_vmalloc_init+0x0/0x1f @ 1
[    7.120007] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 0 usecs
[    7.124003] calling  init_emergency_pool+0x0/0x6b @ 1
[    7.128005] initcall init_emergency_pool+0x0/0x6b returned 0 after 0 usecs
[    7.132003] calling  procswaps_init+0x0/0x1c @ 1
[    7.136016] initcall procswaps_init+0x0/0x1c returned 0 after 0 usecs
[    7.140003] calling  hugetlb_init+0x0/0x32e @ 1
[    7.144003] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    7.148027] initcall hugetlb_init+0x0/0x32e returned 0 after 3906 usecs
[    7.152003] calling  ksm_init+0x0/0x1a5 @ 1
[    7.156049] initcall ksm_init+0x0/0x1a5 returned 0 after 0 usecs
[    7.160004] calling  slab_proc_init+0x0/0x1f @ 1
[    7.164010] initcall slab_proc_init+0x0/0x1f returned 0 after 0 usecs
[    7.172003] calling  slab_sysfs_init+0x0/0xb7 @ 1
[    7.191052] initcall slab_sysfs_init+0x0/0xb7 returned 0 after 11718 usecs
[    7.196009] calling  fasync_init+0x0/0x24 @ 1
[    7.200143] initcall fasync_init+0x0/0x24 returned 0 after 0 usecs
[    7.208003] calling  proc_filesystems_init+0x0/0x1c @ 1
[    7.212012] initcall proc_filesystems_init+0x0/0x1c returned 0 after 0 usecs
[    7.220003] calling  inotify_user_setup+0x0/0x65 @ 1
[    7.224281] initcall inotify_user_setup+0x0/0x65 returned 0 after 0 usecs
[    7.232003] calling  proc_locks_init+0x0/0x1c @ 1
[    7.236009] initcall proc_locks_init+0x0/0x1c returned 0 after 0 usecs
[    7.244006] calling  init_mbcache+0x0/0x11 @ 1
[    7.248003] initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs
[    7.252003] calling  quota_init+0x0/0x20 @ 1
[    7.256046] initcall quota_init+0x0/0x20 returned 0 after 0 usecs
[    7.264003] calling  proc_cmdline_init+0x0/0x1c @ 1
[    7.268008] initcall proc_cmdline_init+0x0/0x1c returned 0 after 0 usecs
[    7.276003] calling  proc_cpuinfo_init+0x0/0x1c @ 1
[    7.280008] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 0 usecs
[    7.288003] calling  proc_devices_init+0x0/0x1c @ 1
[    7.292008] initcall proc_devices_init+0x0/0x1c returned 0 after 0 usecs
[    7.300003] calling  proc_interrupts_init+0x0/0x1c @ 1
[    7.304008] initcall proc_interrupts_init+0x0/0x1c returned 0 after 0 usecs
[    7.312003] calling  proc_loadavg_init+0x0/0x1c @ 1
[    7.316008] initcall proc_loadavg_init+0x0/0x1c returned 0 after 0 usecs
[    7.320003] calling  proc_meminfo_init+0x0/0x1c @ 1
[    7.328008] initcall proc_meminfo_init+0x0/0x1c returned 0 after 0 usecs
[    7.332003] calling  proc_stat_init+0x0/0x1c @ 1
[    7.336008] initcall proc_stat_init+0x0/0x1c returned 0 after 0 usecs
[    7.344003] calling  proc_uptime_init+0x0/0x1c @ 1
[    7.348008] initcall proc_uptime_init+0x0/0x1c returned 0 after 0 usecs
[    7.356003] calling  proc_version_init+0x0/0x1c @ 1
[    7.360008] initcall proc_version_init+0x0/0x1c returned 0 after 0 usecs
[    7.368003] calling  proc_softirqs_init+0x0/0x1c @ 1
[    7.372008] initcall proc_softirqs_init+0x0/0x1c returned 0 after 0 usecs
[    7.380003] calling  proc_kcore_init+0x0/0x78 @ 1
[    7.384011] initcall proc_kcore_init+0x0/0x78 returned 0 after 0 usecs
[    7.392004] calling  vmcore_init+0x0/0x341 @ 1
[    7.396004] initcall vmcore_init+0x0/0x341 returned 0 after 0 usecs
[    7.400003] calling  proc_kmsg_init+0x0/0x1f @ 1
[    7.404008] initcall proc_kmsg_init+0x0/0x1f returned 0 after 0 usecs
[    7.412003] calling  proc_page_init+0x0/0x37 @ 1
[    7.416013] initcall proc_page_init+0x0/0x37 returned 0 after 0 usecs
[    7.424003] calling  configfs_init+0x0/0xbb @ 1
[    7.428155] initcall configfs_init+0x0/0xbb returned 0 after 0 usecs
[    7.436003] calling  init_devpts_fs+0x0/0x3d @ 1
[    7.440039] initcall init_devpts_fs+0x0/0x3d returned 0 after 0 usecs
[    7.444003] calling  init_dlm+0x0/0x8f @ 1
[    7.448209] device: 'dlm-control': device_add
[    7.456023] PM: Adding info for No Bus:dlm-control
[    7.460055] device: 'dlm-monitor': device_add
[    7.464015] PM: Adding info for No Bus:dlm-monitor
[    7.468089] device: 'dlm_plock': device_add
[    7.472014] PM: Adding info for No Bus:dlm_plock
[    7.476047] DLM (built Jun 11 2010 12:25:50) installed
[    7.484004] initcall init_dlm+0x0/0x8f returned 0 after 35156 usecs
[    7.488003] calling  init_ext3_fs+0x0/0x64 @ 1
[    7.492328] initcall init_ext3_fs+0x0/0x64 returned 0 after 0 usecs
[    7.500005] calling  init_ext2_fs+0x0/0x64 @ 1
[    7.504275] initcall init_ext2_fs+0x0/0x64 returned 0 after 0 usecs
[    7.512004] calling  init_ext4_fs+0x0/0xca @ 1
[    7.516860] initcall init_ext4_fs+0x0/0xca returned 0 after 0 usecs
[    7.524004] calling  journal_init+0x0/0xab @ 1
[    7.528565] initcall journal_init+0x0/0xab returned 0 after 0 usecs
[    7.532004] calling  journal_init+0x0/0xbe @ 1
[    7.540208] initcall journal_init+0x0/0xbe returned 0 after 3906 usecs
[    7.544004] calling  init_cramfs_fs+0x0/0x2a @ 1
[    7.548037] initcall init_cramfs_fs+0x0/0x2a returned 0 after 0 usecs
[    7.556003] calling  init_squashfs_fs+0x0/0x5d @ 1
[    7.560147] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    7.568004] initcall init_squashfs_fs+0x0/0x5d returned 0 after 7812 usecs
[    7.572003] calling  init_ramfs_fs+0x0/0xf @ 1
[    7.580004] initcall init_ramfs_fs+0x0/0xf returned 0 after 0 usecs
[    7.584003] calling  init_hugetlbfs_fs+0x0/0x82 @ 1
[    7.588189] initcall init_hugetlbfs_fs+0x0/0x82 returned 0 after 0 usecs
[    7.596004] calling  init_minix_fs+0x0/0x54 @ 1
[    7.600141] initcall init_minix_fs+0x0/0x54 returned 0 after 0 usecs
[    7.608003] calling  init_fat_fs+0x0/0x46 @ 1
[    7.612301] initcall init_fat_fs+0x0/0x46 returned 0 after 0 usecs
[    7.616004] calling  init_vfat_fs+0x0/0xf @ 1
[    7.624005] initcall init_vfat_fs+0x0/0xf returned 0 after 0 usecs
[    7.628003] calling  init_msdos_fs+0x0/0xf @ 1
[    7.632004] initcall init_msdos_fs+0x0/0xf returned 0 after 0 usecs
[    7.640003] calling  init_bfs_fs+0x0/0x54 @ 1
[    7.644136] initcall init_bfs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.648004] calling  init_iso9660_fs+0x0/0x64 @ 1
[    7.656200] initcall init_iso9660_fs+0x0/0x64 returned 0 after 0 usecs
[    7.660004] calling  init_hfs_fs+0x0/0x50 @ 1
[    7.664146] initcall init_hfs_fs+0x0/0x50 returned 0 after 0 usecs
[    7.672004] calling  ecryptfs_init+0x0/0x194 @ 1
[    7.680242] device: 'ecryptfs': device_add
[    7.684019] PM: Adding info for No Bus:ecryptfs
[    7.688055] initcall ecryptfs_init+0x0/0x194 returned 0 after 11718 usecs
[    7.692003] calling  vxfs_init+0x0/0x4d @ 1
[    7.696175] initcall vxfs_init+0x0/0x4d returned 0 after 0 usecs
[    7.700004] calling  init_nls_cp437+0x0/0xf @ 1
[    7.704004] initcall init_nls_cp437+0x0/0xf returned 0 after 0 usecs
[    7.708003] calling  init_nls_cp737+0x0/0xf @ 1
[    7.712003] initcall init_nls_cp737+0x0/0xf returned 0 after 0 usecs
[    7.716003] calling  init_nls_cp850+0x0/0xf @ 1
[    7.720003] initcall init_nls_cp850+0x0/0xf returned 0 after 0 usecs
[    7.724003] calling  init_nls_cp852+0x0/0xf @ 1
[    7.728003] initcall init_nls_cp852+0x0/0xf returned 0 after 0 usecs
[    7.732003] calling  init_nls_cp857+0x0/0xf @ 1
[    7.736003] initcall init_nls_cp857+0x0/0xf returned 0 after 0 usecs
[    7.740003] calling  init_nls_cp861+0x0/0xf @ 1
[    7.744003] initcall init_nls_cp861+0x0/0xf returned 0 after 0 usecs
[    7.748003] calling  init_nls_cp863+0x0/0xf @ 1
[    7.752003] initcall init_nls_cp863+0x0/0xf returned 0 after 0 usecs
[    7.756003] calling  init_nls_cp864+0x0/0xf @ 1
[    7.760003] initcall init_nls_cp864+0x0/0xf returned 0 after 0 usecs
[    7.764003] calling  init_nls_cp865+0x0/0xf @ 1
[    7.768003] initcall init_nls_cp865+0x0/0xf returned 0 after 0 usecs
[    7.772003] calling  init_nls_cp874+0x0/0xf @ 1
[    7.776003] initcall init_nls_cp874+0x0/0xf returned 0 after 0 usecs
[    7.780003] calling  init_nls_cp936+0x0/0xf @ 1
[    7.784003] initcall init_nls_cp936+0x0/0xf returned 0 after 0 usecs
[    7.788003] calling  init_nls_cp950+0x0/0xf @ 1
[    7.792003] initcall init_nls_cp950+0x0/0xf returned 0 after 0 usecs
[    7.796003] calling  init_nls_cp1250+0x0/0xf @ 1
[    7.800003] initcall init_nls_cp1250+0x0/0xf returned 0 after 0 usecs
[    7.804003] calling  init_nls_cp1251+0x0/0xf @ 1
[    7.808003] initcall init_nls_cp1251+0x0/0xf returned 0 after 0 usecs
[    7.812003] calling  init_nls_iso8859_1+0x0/0xf @ 1
[    7.816004] initcall init_nls_iso8859_1+0x0/0xf returned 0 after 0 usecs
[    7.820003] calling  init_nls_iso8859_3+0x0/0xf @ 1
[    7.824003] initcall init_nls_iso8859_3+0x0/0xf returned 0 after 0 usecs
[    7.828003] calling  init_nls_iso8859_4+0x0/0xf @ 1
[    7.832004] initcall init_nls_iso8859_4+0x0/0xf returned 0 after 0 usecs
[    7.836003] calling  init_nls_iso8859_5+0x0/0xf @ 1
[    7.840003] initcall init_nls_iso8859_5+0x0/0xf returned 0 after 0 usecs
[    7.844004] calling  init_nls_iso8859_6+0x0/0xf @ 1
[    7.848004] initcall init_nls_iso8859_6+0x0/0xf returned 0 after 0 usecs
[    7.852003] calling  init_nls_iso8859_7+0x0/0xf @ 1
[    7.856004] initcall init_nls_iso8859_7+0x0/0xf returned 0 after 0 usecs
[    7.860003] calling  init_nls_cp1255+0x0/0xf @ 1
[    7.864004] initcall init_nls_cp1255+0x0/0xf returned 0 after 0 usecs
[    7.868003] calling  init_nls_iso8859_9+0x0/0xf @ 1
[    7.872004] initcall init_nls_iso8859_9+0x0/0xf returned 0 after 0 usecs
[    7.876003] calling  init_nls_iso8859_13+0x0/0xf @ 1
[    7.880004] initcall init_nls_iso8859_13+0x0/0xf returned 0 after 0 usecs
[    7.884003] calling  init_nls_iso8859_15+0x0/0xf @ 1
[    7.888004] initcall init_nls_iso8859_15+0x0/0xf returned 0 after 0 usecs
[    7.892003] calling  init_hpfs_fs+0x0/0x54 @ 1
[    7.896149] initcall init_hpfs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.900004] calling  init_ntfs_fs+0x0/0x1d3 @ 1
[    7.904001] NTFS driver 2.1.29 [Flags: R/W DEBUG].
[    7.908734] initcall init_ntfs_fs+0x0/0x1d3 returned 0 after 3906 usecs
[    7.912004] calling  init_ufs_fs+0x0/0x54 @ 1
[    7.916137] initcall init_ufs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.920004] calling  logfs_init+0x0/0x62 @ 1
[    7.924225] initcall logfs_init+0x0/0x62 returned 0 after 0 usecs
[    7.928004] calling  init_romfs_fs+0x0/0x73 @ 1
[    7.932001] ROMFS MTD (C) 2007 Red Hat, Inc.
[    7.936139] initcall init_romfs_fs+0x0/0x73 returned 0 after 3906 usecs
[    7.940004] calling  init_adfs_fs+0x0/0x54 @ 1
[    7.944138] initcall init_adfs_fs+0x0/0x54 returned 0 after 0 usecs
[    7.948004] calling  init_udf_fs+0x0/0x54 @ 1
[    7.952139] initcall init_udf_fs+0x0/0x54 returned 0 after 0 usecs
[    7.956004] calling  init_jfs_fs+0x0/0x17c @ 1
[    7.960287] JFS: nTxBlock = 7930, nTxLock = 63443
[    7.970162] initcall init_jfs_fs+0x0/0x17c returned 0 after 7812 usecs
[    7.972005] calling  init_xfs_fs+0x0/0x99 @ 1
[    7.976002] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled
[    7.984830] SGI XFS Quota Management subsystem
[    7.988019] initcall init_xfs_fs+0x0/0x99 returned 0 after 11718 usecs
[    7.996004] calling  init_nilfs_fs+0x0/0xc8 @ 1
[    8.000571] NILFS version 2 loaded
[    8.004005] initcall init_nilfs_fs+0x0/0xc8 returned 0 after 3906 usecs
[    8.008003] calling  init_befs_fs+0x0/0x6d @ 1
[    8.016002] BeFS version: 0.9.3
[    8.019281] initcall init_befs_fs+0x0/0x6d returned 0 after 0 usecs
[    8.024004] calling  init_btrfs_fs+0x0/0x83 @ 1
[    8.029031] device: 'btrfs-control': device_add
[    8.032021] PM: Adding info for No Bus:btrfs-control
[    8.040051] Btrfs loaded
[    8.042584] initcall init_btrfs_fs+0x0/0x83 returned 0 after 11718 usecs
[    8.048004] calling  init_gfs2_fs+0x0/0x1e4 @ 1
[    8.052911] GFS2 (built Jun 11 2010 12:26:03) installed
[    8.060006] initcall init_gfs2_fs+0x0/0x1e4 returned 0 after 7812 usecs
[    8.064003] calling  ipc_init+0x0/0x2a @ 1
[    8.068017] msgmni has been set to 1982
[    8.072015] initcall ipc_init+0x0/0x2a returned 0 after 3906 usecs
[    8.080003] calling  key_proc_init+0x0/0x4e @ 1
[    8.084014] initcall key_proc_init+0x0/0x4e returned 0 after 0 usecs
[    8.092003] calling  crypto_wq_init+0x0/0x29 @ 1
[    8.096042] initcall crypto_wq_init+0x0/0x29 returned 0 after 0 usecs
[    8.100003] calling  crypto_algapi_init+0x0/0xc @ 1
[    8.108011] initcall crypto_algapi_init+0x0/0xc returned 0 after 0 usecs
[    8.112003] calling  skcipher_module_init+0x0/0x29 @ 1
[    8.120003] initcall skcipher_module_init+0x0/0x29 returned 0 after 0 usecs
[    8.124003] calling  chainiv_module_init+0x0/0xf @ 1
[    8.132005] initcall chainiv_module_init+0x0/0xf returned 0 after 0 usecs
[    8.136003] calling  eseqiv_module_init+0x0/0xf @ 1
[    8.144003] initcall eseqiv_module_init+0x0/0xf returned 0 after 0 usecs
[    8.148003] calling  seqiv_module_init+0x0/0xf @ 1
[    8.152003] initcall seqiv_module_init+0x0/0xf returned 0 after 0 usecs
[    8.160003] calling  hmac_module_init+0x0/0xf @ 1
[    8.164003] initcall hmac_module_init+0x0/0xf returned 0 after 0 usecs
[    8.172003] calling  vmac_module_init+0x0/0xf @ 1
[    8.176003] initcall vmac_module_init+0x0/0xf returned 0 after 0 usecs
[    8.184003] calling  crypto_xcbc_module_init+0x0/0xf @ 1
[    8.188003] initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.196003] calling  md4_mod_init+0x0/0xf @ 1
[    8.200082] initcall md4_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.200090] cryptomgr_test used greatest stack depth: 2988 bytes left
[    8.204004] calling  md5_mod_init+0x0/0xf @ 1
[    8.208073] initcall md5_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.216008] calling  rmd128_mod_init+0x0/0xf @ 1
[    8.220073] initcall rmd128_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.224029] calling  rmd256_mod_init+0x0/0xf @ 1
[    8.228070] initcall rmd256_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.232027] calling  sha1_generic_mod_init+0x0/0xf @ 1
[    8.240060] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.240073] cryptomgr_test used greatest stack depth: 2816 bytes left
[    8.244030] calling  sha256_generic_mod_init+0x0/0x33 @ 1
[    8.248085] initcall sha256_generic_mod_init+0x0/0x33 returned 0 after 0 usecs
[    8.256029] calling  sha512_generic_mod_init+0x0/0x33 @ 1
[    8.264113] cryptomgr_test used greatest stack depth: 2692 bytes left
[    8.271099] initcall sha512_generic_mod_init+0x0/0x33 returned 0 after 3906 usecs
[    8.272051] calling  wp512_mod_init+0x0/0x52 @ 1
[    8.276196] initcall wp512_mod_init+0x0/0x52 returned 0 after 0 usecs
[    8.284008] calling  tgr192_mod_init+0x0/0x52 @ 1
[    8.288106] initcall tgr192_mod_init+0x0/0x52 returned 0 after 0 usecs
[    8.292093] calling  crypto_ecb_module_init+0x0/0xf @ 1
[    8.296004] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 0 usecs
[    8.300003] calling  crypto_cbc_module_init+0x0/0xf @ 1
[    8.304004] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.308003] calling  crypto_pcbc_module_init+0x0/0xf @ 1
[    8.312003] initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.316003] calling  crypto_module_init+0x0/0xf @ 1
[    8.320004] initcall crypto_module_init+0x0/0xf returned 0 after 0 usecs
[    8.324014] calling  crypto_ctr_module_init+0x0/0x35 @ 1
[    8.328003] initcall crypto_ctr_module_init+0x0/0x35 returned 0 after 0 usecs
[    8.332003] calling  crypto_gcm_module_init+0x0/0xd0 @ 1
[    8.336005] initcall crypto_gcm_module_init+0x0/0xd0 returned 0 after 0 usecs
[    8.340003] calling  crypto_ccm_module_init+0x0/0x4f @ 1
[    8.344004] initcall crypto_ccm_module_init+0x0/0x4f returned 0 after 0 usecs
[    8.348003] calling  pcrypt_init+0x0/0xc9 @ 1
[    8.352053] initcall pcrypt_init+0x0/0xc9 returned 0 after 0 usecs
[    8.356005] calling  cryptd_init+0x0/0xc8 @ 1
[    8.360008] initcall cryptd_init+0x0/0xc8 returned 0 after 0 usecs
[    8.368006] calling  des_generic_mod_init+0x0/0x33 @ 1
[    8.372081] initcall des_generic_mod_init+0x0/0x33 returned 0 after 0 usecs
[    8.376004] calling  fcrypt_mod_init+0x0/0xf @ 1
[    8.380043] alg: No test for fcrypt (fcrypt-generic)
[    8.384008] initcall fcrypt_mod_init+0x0/0xf returned 0 after 3906 usecs
[    8.392048] calling  blowfish_mod_init+0x0/0xf @ 1
[    8.396723] initcall blowfish_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.400005] calling  twofish_mod_init+0x0/0xf @ 1
[    8.404205] initcall twofish_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.412030] calling  serpent_mod_init+0x0/0x33 @ 1
[    8.416098] initcall serpent_mod_init+0x0/0x33 returned 0 after 0 usecs
[    8.420028] calling  aes_init+0x0/0xf @ 1
[    8.424087] initcall aes_init+0x0/0xf returned 0 after 0 usecs
[    8.428052] calling  camellia_init+0x0/0xf @ 1
[    8.436076] initcall camellia_init+0x0/0xf returned 0 after 0 usecs
[    8.440028] calling  cast5_mod_init+0x0/0xf @ 1
[    8.444067] initcall cast5_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.452031] calling  arc4_init+0x0/0xf @ 1
[    8.456081] initcall arc4_init+0x0/0xf returned 0 after 0 usecs
[    8.460029] calling  tea_mod_init+0x0/0x52 @ 1
[    8.464074] initcall tea_mod_init+0x0/0x52 returned 0 after 0 usecs
[    8.468031] calling  khazad_mod_init+0x0/0xf @ 1
[    8.472082] initcall khazad_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.476070] calling  anubis_mod_init+0x0/0xf @ 1
[    8.480121] initcall anubis_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.488033] calling  seed_init+0x0/0xf @ 1
[    8.492067] initcall seed_init+0x0/0xf returned 0 after 0 usecs
[    8.496033] calling  salsa20_generic_mod_init+0x0/0xf @ 1
[    8.500046] initcall salsa20_generic_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.508031] calling  deflate_mod_init+0x0/0xf @ 1
[    8.512612] initcall deflate_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.516032] calling  zlib_mod_init+0x0/0xf @ 1
[    8.520962] initcall zlib_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.520980] cryptomgr_test used greatest stack depth: 2664 bytes left
[    8.532034] calling  crc32c_mod_init+0x0/0xf @ 1
[    8.536115] initcall crc32c_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.540035] calling  crypto_authenc_module_init+0x0/0xf @ 1
[    8.544005] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 0 usecs
[    8.548003] calling  lzo_mod_init+0x0/0xf @ 1
[    8.552072] initcall lzo_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.560032] calling  krng_mod_init+0x0/0xf @ 1
[    8.564045] alg: No test for stdrng (krng)
[    8.568008] initcall krng_mod_init+0x0/0xf returned 0 after 3906 usecs
[    8.572029] calling  prng_mod_init+0x0/0x1d @ 1
[    8.587720] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    8.588008] initcall prng_mod_init+0x0/0x1d returned 0 after 11718 usecs
[    8.596026] calling  ghash_mod_init+0x0/0xf @ 1
[    8.600125] initcall ghash_mod_init+0x0/0xf returned 0 after 0 usecs
[    8.604025] calling  async_pq_init+0x0/0x3c @ 1
[    8.608005] initcall async_pq_init+0x0/0x3c returned 0 after 0 usecs
[    8.612003] calling  proc_genhd_init+0x0/0x31 @ 1
[    8.616023] initcall proc_genhd_init+0x0/0x31 returned 0 after 0 usecs
[    8.620027] calling  init_cgroup_blkio+0x0/0xf @ 1
[    8.624004] initcall init_cgroup_blkio+0x0/0xf returned 0 after 0 usecs
[    8.628003] calling  noop_init+0x0/0x11 @ 1
[    8.632002] io scheduler noop registered
[    8.636003] initcall noop_init+0x0/0x11 returned 0 after 3906 usecs
[    8.640003] calling  cfq_init+0x0/0x93 @ 1
[    8.644342] io scheduler cfq registered (default)
[    8.648007] initcall cfq_init+0x0/0x93 returned 0 after 3906 usecs
[    8.652003] calling  btree_module_init+0x0/0x24 @ 1
[    8.656161] initcall btree_module_init+0x0/0x24 returned 0 after 0 usecs
[    8.660003] calling  debug_objects_init_debugfs+0x0/0x57 @ 1
[    8.664033] initcall debug_objects_init_debugfs+0x0/0x57 returned 0 after 0 usecs
[    8.668006] calling  libcrc32c_mod_init+0x0/0x25 @ 1
[    8.672009] initcall libcrc32c_mod_init+0x0/0x25 returned 0 after 0 usecs
[    8.676003] calling  percpu_counter_startup+0x0/0x16 @ 1
[    8.680006] initcall percpu_counter_startup+0x0/0x16 returned 0 after 0 usecs
[    8.684007] calling  err_inject_init+0x0/0x19 @ 1
[    8.688003] initcall err_inject_init+0x0/0x19 returned 0 after 0 usecs
[    8.692003] calling  dynamic_debug_init+0x0/0xf9 @ 1
[    8.696480] initcall dynamic_debug_init+0x0/0xf9 returned 0 after 0 usecs
[    8.700006] calling  adp5588_gpio_init+0x0/0x11 @ 1
[    8.704005] bus: 'i2c': add driver adp5588-gpio
[    8.708068] i2c-core: driver [adp5588-gpio] registered
[    8.712005] initcall adp5588_gpio_init+0x0/0x11 returned 0 after 7812 usecs
[    8.716004] calling  lnw_gpio_init+0x0/0x16 @ 1
[    8.720003] bus: 'pci': add driver langwell_gpio
[    8.724064] initcall lnw_gpio_init+0x0/0x16 returned 0 after 3906 usecs
[    8.728003] calling  bt8xxgpio_init+0x0/0x16 @ 1
[    8.732002] bus: 'pci': add driver bt8xxgpio
[    8.736059] initcall bt8xxgpio_init+0x0/0x16 returned 0 after 3906 usecs
[    8.740003] calling  it8761e_gpio_init+0x0/0x178 @ 1
[    8.744037] initcall it8761e_gpio_init+0x0/0x178 returned -19 after 0 usecs
[    8.748003] calling  sch_gpio_init+0x0/0xf @ 1
[    8.752004] bus: 'platform': add driver sch_gpio
[    8.756057] initcall sch_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    8.760003] calling  rdc321x_gpio_init+0x0/0xf @ 1
[    8.764002] bus: 'platform': add driver rdc321x-gpio
[    8.768056] initcall rdc321x_gpio_init+0x0/0xf returned 0 after 3906 usecs
[    8.772003] calling  pci_proc_init+0x0/0x5b @ 1
[    8.776163] initcall pci_proc_init+0x0/0x5b returned 0 after 0 usecs
[    8.780003] calling  pcie_portdrv_init+0x0/0x4b @ 1
[    8.784066] bus: 'pci_express': registered
[    8.788002] bus: 'pci': add driver pcieport
[    8.792011] bus: 'pci': driver_probe_device: matched device 0000:00:0b.0 with driver pcieport
[    8.796002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0b.0
[    8.800028] pcieport 0000:00:0b.0: setting latency timer to 64
[    8.804153] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    8.808027] device: '0000:00:0b.0:pcie01': device_add
[    8.812007] bus: 'pci_express': add device 0000:00:0b.0:pcie01
[    8.816025] PM: Adding info for pci_express:0000:00:0b.0:pcie01
[    8.820174] driver: '0000:00:0b.0': driver_bound: bound to device 'pcieport'
[    8.824003] bus: 'pci': really_probe: bound device 0000:00:0b.0 to driver pcieport
[    8.828003] bus: 'pci': driver_probe_device: matched device 0000:00:0c.0 with driver pcieport
[    8.832002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0c.0
[    8.836024] pcieport 0000:00:0c.0: setting latency timer to 64
[    8.840147] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    8.844025] device: '0000:00:0c.0:pcie01': device_add
[    8.848006] bus: 'pci_express': add device 0000:00:0c.0:pcie01
[    8.852020] PM: Adding info for pci_express:0000:00:0c.0:pcie01
[    8.856171] driver: '0000:00:0c.0': driver_bound: bound to device 'pcieport'
[    8.860002] bus: 'pci': really_probe: bound device 0000:00:0c.0 to driver pcieport
[    8.864003] bus: 'pci': driver_probe_device: matched device 0000:00:0d.0 with driver pcieport
[    8.868002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0d.0
[    8.872024] pcieport 0000:00:0d.0: setting latency timer to 64
[    8.876147] pcieport 0000:00:0d.0: irq 43 for MSI/MSI-X
[    8.880025] device: '0000:00:0d.0:pcie01': device_add
[    8.884006] bus: 'pci_express': add device 0000:00:0d.0:pcie01
[    8.888011] PM: Adding info for pci_express:0000:00:0d.0:pcie01
[    8.892171] driver: '0000:00:0d.0': driver_bound: bound to device 'pcieport'
[    8.896002] bus: 'pci': really_probe: bound device 0000:00:0d.0 to driver pcieport
[    8.900003] bus: 'pci': driver_probe_device: matched device 0000:00:0e.0 with driver pcieport
[    8.904002] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:0e.0
[    8.908024] pcieport 0000:00:0e.0: setting latency timer to 64
[    8.912146] pcieport 0000:00:0e.0: irq 44 for MSI/MSI-X
[    8.916025] device: '0000:00:0e.0:pcie01': device_add
[    8.920015] bus: 'pci_express': add device 0000:00:0e.0:pcie01
[    8.924011] PM: Adding info for pci_express:0000:00:0e.0:pcie01
[    8.928171] driver: '0000:00:0e.0': driver_bound: bound to device 'pcieport'
[    8.932002] bus: 'pci': really_probe: bound device 0000:00:0e.0 to driver pcieport
[    8.936056] initcall pcie_portdrv_init+0x0/0x4b returned 0 after 148437 usecs
[    8.940003] calling  pci_hotplug_init+0x0/0x41 @ 1
[    8.944002] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.948003] initcall pci_hotplug_init+0x0/0x41 returned 0 after 3906 usecs
[    8.952003] calling  cpqhpc_init+0x0/0x5a @ 1
[    8.956002] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
[    8.960020] bus: 'pci': add driver compaq_pci_hotplug
[    8.964063] initcall cpqhpc_init+0x0/0x5a returned 0 after 7812 usecs
[    8.968003] calling  pcied_init+0x0/0x62 @ 1
[    8.972002] bus: 'pci_express': add driver pciehp
[    8.976054] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    8.980003] initcall pcied_init+0x0/0x62 returned 0 after 7812 usecs
[    8.984003] calling  zt5550_init+0x0/0x6c @ 1
[    8.988002] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[    8.992004] bus: 'pci': add driver zt5550_hc
[    8.996070] initcall zt5550_init+0x0/0x6c returned 0 after 7812 usecs
[    9.000004] calling  cpcihp_generic_init+0x0/0x3b0 @ 1
[    9.004002] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[    9.008002] cpcihp_generic: not configured, disabling.
[    9.012003] initcall cpcihp_generic_init+0x0/0x3b0 returned -22 after 7812 usecs
[    9.016003] initcall cpcihp_generic_init+0x0/0x3b0 returned with error code -22 
[    9.020003] calling  shpcd_init+0x0/0x4e @ 1
[    9.024002] bus: 'pci': add driver shpchp
[    9.028070] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.032004] initcall shpcd_init+0x0/0x4e returned 0 after 7812 usecs
[    9.036003] calling  init_legacy+0x0/0x36 @ 1
[    9.040200] initcall init_legacy+0x0/0x36 returned 0 after 0 usecs
[    9.044003] calling  pci_stub_init+0x0/0xf2 @ 1
[    9.048004] bus: 'pci': add driver pci-stub
[    9.052061] pci-stub: invalid id string ""
[    9.056004] initcall pci_stub_init+0x0/0xf2 returned 0 after 7812 usecs
[    9.060003] calling  genericbl_init+0x0/0xf @ 1
[    9.064003] bus: 'platform': add driver generic-bl
[    9.068055] initcall genericbl_init+0x0/0xf returned 0 after 3906 usecs
[    9.072003] calling  progearbl_init+0x0/0x49 @ 1
[    9.076002] bus: 'platform': add driver progear-bl
[    9.080057] Registering platform device 'progear-bl'. Parent at platform
[    9.084003] device: 'progear-bl': device_add
[    9.088006] bus: 'platform': add device progear-bl
[    9.092013] PM: Adding info for platform:progear-bl
[    9.096053] bus: 'platform': driver_probe_device: matched device progear-bl with driver progear-bl
[    9.100002] bus: 'platform': really_probe: probing driver progear-bl with device progear-bl
[    9.104011] ALI M7101 PMU not found.
[    9.108014] initcall progearbl_init+0x0/0x49 returned 0 after 31250 usecs
[    9.112004] calling  cr_backlight_init+0x0/0x56 @ 1
[    9.116002] bus: 'platform': add driver cr_backlight
[    9.120056] Registering platform device 'cr_backlight'. Parent at platform
[    9.124003] device: 'cr_backlight': device_add
[    9.128005] bus: 'platform': add device cr_backlight
[    9.132012] PM: Adding info for platform:cr_backlight
[    9.136065] bus: 'platform': driver_probe_device: matched device cr_backlight with driver cr_backlight
[    9.140002] bus: 'platform': really_probe: probing driver cr_backlight with device cr_backlight
[    9.144011] INTEL CARILLO RANCH LPC not found.
[    9.148009] Carillo Ranch Backlight Driver Initialized.
[    9.152004] initcall cr_backlight_init+0x0/0x56 returned 0 after 35156 usecs
[    9.156003] calling  da903x_backlight_init+0x0/0xf @ 1
[    9.160003] bus: 'platform': add driver da903x-backlight
[    9.164066] initcall da903x_backlight_init+0x0/0xf returned 0 after 3906 usecs
[    9.168003] calling  adp8860_init+0x0/0x11 @ 1
[    9.172003] bus: 'i2c': add driver adp8860_bl
[    9.176054] i2c-core: driver [adp8860_bl] registered
[    9.180004] initcall adp8860_init+0x0/0x11 returned 0 after 7812 usecs
[    9.184003] calling  pm860x_backlight_init+0x0/0xf @ 1
[    9.188002] bus: 'platform': add driver 88pm860x-backlight
[    9.192056] initcall pm860x_backlight_init+0x0/0xf returned 0 after 3906 usecs
[    9.196003] calling  display_class_init+0x0/0x69 @ 1
[    9.200003] device class 'display': registering
[    9.204056] initcall display_class_init+0x0/0x69 returned 0 after 3906 usecs
[    9.208003] calling  arcfb_init+0x0/0x60 @ 1
[    9.212003] initcall arcfb_init+0x0/0x60 returned -6 after 0 usecs
[    9.216003] initcall arcfb_init+0x0/0x60 returned with error code -6 
[    9.220003] calling  cyber2000fb_init+0x0/0xac @ 1
[    9.224003] bus: 'pci': add driver CyberPro
[    9.228063] initcall cyber2000fb_init+0x0/0xac returned 0 after 3906 usecs
[    9.232004] calling  nvidiafb_init+0x0/0x26a @ 1
[    9.236002] bus: 'pci': add driver nvidiafb
[    9.240061] initcall nvidiafb_init+0x0/0x26a returned 0 after 3906 usecs
[    9.244003] calling  atyfb_init+0x0/0x1dd @ 1
[    9.248002] bus: 'pci': add driver atyfb
[    9.252065] initcall atyfb_init+0x0/0x1dd returned 0 after 3906 usecs
[    9.256003] calling  aty128fb_init+0x0/0x113 @ 1
[    9.260002] bus: 'pci': add driver aty128fb
[    9.264065] initcall aty128fb_init+0x0/0x113 returned 0 after 3906 usecs
[    9.268003] calling  sisfb_init+0x0/0x6eb @ 1
[    9.272002] bus: 'pci': add driver sisfb
[    9.276062] initcall sisfb_init+0x0/0x6eb returned 0 after 3906 usecs
[    9.280003] calling  kyrofb_init+0x0/0xc9 @ 1
[    9.284002] bus: 'pci': add driver kyrofb
[    9.288071] initcall kyrofb_init+0x0/0xc9 returned 0 after 3906 usecs
[    9.292003] calling  savagefb_init+0x0/0x60 @ 1
[    9.296003] bus: 'pci': add driver savagefb
[    9.300063] initcall savagefb_init+0x0/0x60 returned 0 after 3906 usecs
[    9.304004] calling  gx1fb_init+0x0/0x104 @ 1
[    9.308003] bus: 'pci': add driver gx1fb
[    9.312062] initcall gx1fb_init+0x0/0x104 returned 0 after 3906 usecs
[    9.316003] calling  gxfb_init+0x0/0x6c @ 1
[    9.320002] bus: 'pci': add driver gxfb
[    9.324061] initcall gxfb_init+0x0/0x6c returned 0 after 3906 usecs
[    9.328003] calling  lxfb_init+0x0/0xc9 @ 1
[    9.332002] bus: 'pci': add driver lxfb
[    9.336062] initcall lxfb_init+0x0/0xc9 returned 0 after 3906 usecs
[    9.340003] calling  neofb_init+0x0/0x12e @ 1
[    9.344002] bus: 'pci': add driver neofb
[    9.348062] initcall neofb_init+0x0/0x12e returned 0 after 3906 usecs
[    9.352003] calling  imsttfb_init+0x0/0xd6 @ 1
[    9.356002] bus: 'pci': add driver imsttfb
[    9.360062] initcall imsttfb_init+0x0/0xd6 returned 0 after 3906 usecs
[    9.364003] calling  vt8623fb_init+0x0/0x75 @ 1
[    9.368002] bus: 'pci': add driver vt8623fb
[    9.372072] initcall vt8623fb_init+0x0/0x75 returned 0 after 3906 usecs
[    9.376004] calling  tridentfb_init+0x0/0x1da @ 1
[    9.380003] bus: 'pci': add driver tridentfb
[    9.384063] initcall tridentfb_init+0x0/0x1da returned 0 after 3906 usecs
[    9.388003] calling  vmlfb_init+0x0/0x7f @ 1
[    9.392002] vmlfb: initializing
[    9.396002] bus: 'pci': add driver vmlfb
[    9.400062] initcall vmlfb_init+0x0/0x7f returned 0 after 7812 usecs
[    9.404003] calling  cr_pll_init+0x0/0xc2 @ 1
[    9.408007] Could not find Carillo Ranch MCH device.
[    9.412003] initcall cr_pll_init+0x0/0xc2 returned -19 after 3906 usecs
[    9.416003] calling  arkfb_init+0x0/0x75 @ 1
[    9.420002] bus: 'pci': add driver arkfb
[    9.424062] initcall arkfb_init+0x0/0x75 returned 0 after 3906 usecs
[    9.428003] calling  hecubafb_init+0x0/0xf @ 1
[    9.432003] bus: 'platform': add driver hecubafb
[    9.436056] initcall hecubafb_init+0x0/0xf returned 0 after 3906 usecs
[    9.440003] calling  n411_init+0x0/0x7c @ 1
[    9.444001] no IO addresses supplied
[    9.448003] initcall n411_init+0x0/0x7c returned -22 after 3906 usecs
[    9.452003] initcall n411_init+0x0/0x7c returned with error code -22 
[    9.456003] calling  hgafb_init+0x0/0x5d @ 1
[    9.460002] bus: 'platform': add driver hgafb
[    9.464058] Registering platform device 'hgafb.0'. Parent at platform
[    9.468010] device: 'hgafb.0': device_add
[    9.472006] bus: 'platform': add device hgafb.0
[    9.476022] PM: Adding info for platform:hgafb.0
[    9.480052] bus: 'platform': driver_probe_device: matched device hgafb.0 with driver hgafb
[    9.484002] bus: 'platform': really_probe: probing driver hgafb with device hgafb.0
[    9.488016] hgafb: HGA card not detected.
[    9.492008] hgafb: probe of hgafb.0 failed with error -22
[    9.496004] initcall hgafb_init+0x0/0x5d returned 0 after 35156 usecs
[    9.500003] calling  sstfb_init+0x0/0x18a @ 1
[    9.504003] bus: 'pci': add driver sstfb
[    9.508072] initcall sstfb_init+0x0/0x18a returned 0 after 3906 usecs
[    9.512004] calling  intel_idle_init+0x0/0x2f9 @ 1
[    9.516004] initcall intel_idle_init+0x0/0x2f9 returned -19 after 0 usecs
[    9.520003] calling  regulator_userspace_consumer_init+0x0/0xf @ 1
[    9.524003] bus: 'platform': add driver reg-userspace-consumer
[    9.528057] initcall regulator_userspace_consumer_init+0x0/0xf returned 0 after 3906 usecs
[    9.532003] calling  bq24022_init+0x0/0x14 @ 1
[    9.536003] bus: 'platform': add driver bq24022
[    9.540057] bus: 'platform': remove driver bq24022
[    9.544051] driver: 'bq24022': driver_release
[    9.548007] initcall bq24022_init+0x0/0x14 returned -19 after 11718 usecs
[    9.552003] calling  lp3971_module_init+0x0/0x2a @ 1
[    9.556003] bus: 'i2c': add driver LP3971
[    9.560055] i2c-core: driver [LP3971] registered
[    9.564004] initcall lp3971_module_init+0x0/0x2a returned 0 after 7812 usecs
[    9.568005] calling  rand_initialize+0x0/0x25 @ 1
[    9.572036] initcall rand_initialize+0x0/0x25 returned 0 after 0 usecs
[    9.576003] calling  tty_init+0x0/0xd5 @ 1
[    9.580010] device: 'tty': device_add
[    9.584018] PM: Adding info for No Bus:tty
[    9.588056] device: 'console': device_add
[    9.592015] PM: Adding info for No Bus:console
[    9.596061] device: 'tty0': device_add
[    9.600015] PM: Adding info for No Bus:tty0
[    9.604054] device class 'vc': registering
[    9.608067] device: 'vcs': device_add
[    9.612014] PM: Adding info for No Bus:vcs
[    9.616051] device: 'vcsa': device_add
[    9.620023] PM: Adding info for No Bus:vcsa
[    9.624052] device: 'vcs1': device_add
[    9.628014] PM: Adding info for No Bus:vcs1
[    9.632051] device: 'vcsa1': device_add
[    9.636014] PM: Adding info for No Bus:vcsa1
[    9.640059] device: 'tty1': device_add
[    9.644014] PM: Adding info for No Bus:tty1
[    9.648051] device: 'tty2': device_add
[    9.652014] PM: Adding info for No Bus:tty2
[    9.656051] device: 'tty3': device_add
[    9.660015] PM: Adding info for No Bus:tty3
[    9.664051] device: 'tty4': device_add
[    9.668024] PM: Adding info for No Bus:tty4
[    9.672052] device: 'tty5': device_add
[    9.676015] PM: Adding info for No Bus:tty5
[    9.680051] device: 'tty6': device_add
[    9.684014] PM: Adding info for No Bus:tty6
[    9.688050] device: 'tty7': device_add
[    9.692014] PM: Adding info for No Bus:tty7
[    9.696058] device: 'tty8': device_add
[    9.700015] PM: Adding info for No Bus:tty8
[    9.704051] device: 'tty9': device_add
[    9.708014] PM: Adding info for No Bus:tty9
[    9.712050] device: 'tty10': device_add
[    9.716023] PM: Adding info for No Bus:tty10
[    9.720051] device: 'tty11': device_add
[    9.724015] PM: Adding info for No Bus:tty11
[    9.728050] device: 'tty12': device_add
[    9.732015] PM: Adding info for No Bus:tty12
[    9.736058] device: 'tty13': device_add
[    9.740015] PM: Adding info for No Bus:tty13
[    9.744051] device: 'tty14': device_add
[    9.748025] PM: Adding info for No Bus:tty14
[    9.752051] device: 'tty15': device_add
[    9.755901] PM: Adding info for No Bus:tty15
[    9.756050] device: 'tty16': device_add
[    9.760024] PM: Adding info for No Bus:tty16
[    9.764051] device: 'tty17': device_add
[    9.768015] PM: Adding info for No Bus:tty17
[    9.772050] device: 'tty18': device_add
[    9.776015] PM: Adding info for No Bus:tty18
[    9.780050] device: 'tty19': device_add
[    9.784015] PM: Adding info for No Bus:tty19
[    9.788050] device: 'tty20': device_add
[    9.792015] PM: Adding info for No Bus:tty20
[    9.796057] device: 'tty21': device_add
[    9.800016] PM: Adding info for No Bus:tty21
[    9.804051] device: 'tty22': device_add
[    9.808024] PM: Adding info for No Bus:tty22
[    9.812051] device: 'tty23': device_add
[    9.816024] PM: Adding info for No Bus:tty23
[    9.820051] device: 'tty24': device_add
[    9.824015] PM: Adding info for No Bus:tty24
[    9.828050] device: 'tty25': device_add
[    9.832015] PM: Adding info for No Bus:tty25
[    9.836050] device: 'tty26': device_add
[    9.840015] PM: Adding info for No Bus:tty26
[    9.844050] device: 'tty27': device_add
[    9.848015] PM: Adding info for No Bus:tty27
[    9.852050] device: 'tty28': device_add
[    9.856025] PM: Adding info for No Bus:tty28
[    9.860051] device: 'tty29': device_add
[    9.864016] PM: Adding info for No Bus:tty29
[    9.868050] device: 'tty30': device_add
[    9.872015] PM: Adding info for No Bus:tty30
[    9.876050] device: 'tty31': device_add
[    9.880016] PM: Adding info for No Bus:tty31
[    9.884050] device: 'tty32': device_add
[    9.888016] PM: Adding info for No Bus:tty32
[    9.892060] device: 'tty33': device_add
[    9.896017] PM: Adding info for No Bus:tty33
[    9.900058] device: 'tty34': device_add
[    9.904025] PM: Adding info for No Bus:tty34
[    9.908051] device: 'tty35': device_add
[    9.912016] PM: Adding info for No Bus:tty35
[    9.916050] device: 'tty36': device_add
[    9.920016] PM: Adding info for No Bus:tty36
[    9.924050] device: 'tty37': device_add
[    9.928016] PM: Adding info for No Bus:tty37
[    9.932050] device: 'tty38': device_add
[    9.936016] PM: Adding info for No Bus:tty38
[    9.940050] device: 'tty39': device_add
[    9.943894] PM: Adding info for No Bus:tty39
[    9.944050] device: 'tty40': device_add
[    9.948025] PM: Adding info for No Bus:tty40
[    9.952059] device: 'tty41': device_add
[    9.956017] PM: Adding info for No Bus:tty41
[    9.960051] device: 'tty42': device_add
[    9.964016] PM: Adding info for No Bus:tty42
[    9.968050] device: 'tty43': device_add
[    9.972016] PM: Adding info for No Bus:tty43
[    9.976050] device: 'tty44': device_add
[    9.980016] PM: Adding info for No Bus:tty44
[    9.984050] device: 'tty45': device_add
[    9.988016] PM: Adding info for No Bus:tty45
[    9.992050] device: 'tty46': device_add
[    9.996026] PM: Adding info for No Bus:tty46
[   10.000058] device: 'tty47': device_add
[   10.004017] PM: Adding info for No Bus:tty47
[   10.008051] device: 'tty48': device_add
[   10.012016] PM: Adding info for No Bus:tty48
[   10.016050] device: 'tty49': device_add
[   10.020016] PM: Adding info for No Bus:tty49
[   10.024050] device: 'tty50': device_add
[   10.028016] PM: Adding info for No Bus:tty50
[   10.032050] device: 'tty51': device_add
[   10.036028] PM: Adding info for No Bus:tty51
[   10.040051] device: 'tty52': device_add
[   10.044044] PM: Adding info for No Bus:tty52
[   10.048051] device: 'tty53': device_add
[   10.052024] PM: Adding info for No Bus:tty53
[   10.056050] device: 'tty54': device_add
[   10.060024] PM: Adding info for No Bus:tty54
[   10.064050] device: 'tty55': device_add
[   10.068016] PM: Adding info for No Bus:tty55
[   10.072051] device: 'tty56': device_add
[   10.076016] PM: Adding info for No Bus:tty56
[   10.080050] device: 'tty57': device_add
[   10.084027] PM: Adding info for No Bus:tty57
[   10.088052] device: 'tty58': device_add
[   10.092026] PM: Adding info for No Bus:tty58
[   10.096052] device: 'tty59': device_add
[   10.100017] PM: Adding info for No Bus:tty59
[   10.104057] device: 'tty60': device_add
[   10.108018] PM: Adding info for No Bus:tty60
[   10.112051] device: 'tty61': device_add
[   10.116017] PM: Adding info for No Bus:tty61
[   10.120050] device: 'tty62': device_add
[   10.123892] PM: Adding info for No Bus:tty62
[   10.124050] device: 'tty63': device_add
[   10.128017] PM: Adding info for No Bus:tty63
[   10.132054] initcall tty_init+0x0/0xd5 returned 0 after 539062 usecs
[   10.136005] calling  pty_init+0x0/0x40e @ 1
[   10.140023] device: 'ptyp0': device_add
[   10.144026] PM: Adding info for No Bus:ptyp0
[   10.148052] device: 'ptyp1': device_add
[   10.152016] PM: Adding info for No Bus:ptyp1
[   10.156050] device: 'ptyp2': device_add
[   10.160016] PM: Adding info for No Bus:ptyp2
[   10.164050] device: 'ptyp3': device_add
[   10.168016] PM: Adding info for No Bus:ptyp3
[   10.172058] device: 'ptyp4': device_add
[   10.176017] PM: Adding info for No Bus:ptyp4
[   10.180051] device: 'ptyp5': device_add
[   10.184027] PM: Adding info for No Bus:ptyp5
[   10.192032] device: 'ptyp6': device_add
[   10.195890] PM: Adding info for No Bus:ptyp6
[   10.196051] device: 'ptyp7': device_add
[   10.200016] PM: Adding info for No Bus:ptyp7
[   10.204050] device: 'ptyp8': device_add
[   10.208016] PM: Adding info for No Bus:ptyp8
[   10.212057] device: 'ptyp9': device_add
[   10.216017] PM: Adding info for No Bus:ptyp9
[   10.220051] device: 'ptypa': device_add
[   10.224017] PM: Adding info for No Bus:ptypa
[   10.228050] device: 'ptypb': device_add
[   10.232017] PM: Adding info for No Bus:ptypb
[   10.236050] device: 'ptypc': device_add
[   10.240026] PM: Adding info for No Bus:ptypc
[   10.244052] device: 'ptypd': device_add
[   10.248017] PM: Adding info for No Bus:ptypd
[   10.252050] device: 'ptype': device_add
[   10.256017] PM: Adding info for No Bus:ptype
[   10.260050] device: 'ptypf': device_add
[   10.264017] PM: Adding info for No Bus:ptypf
[   10.268050] device: 'ptyq0': device_add
[   10.272017] PM: Adding info for No Bus:ptyq0
[   10.276050] device: 'ptyq1': device_add
[   10.280017] PM: Adding info for No Bus:ptyq1
[   10.284050] device: 'ptyq2': device_add
[   10.288026] PM: Adding info for No Bus:ptyq2
[   10.292051] device: 'ptyq3': device_add
[   10.296017] PM: Adding info for No Bus:ptyq3
[   10.300050] device: 'ptyq4': device_add
[   10.304017] PM: Adding info for No Bus:ptyq4
[   10.308050] device: 'ptyq5': device_add
[   10.312018] PM: Adding info for No Bus:ptyq5
[   10.316057] device: 'ptyq6': device_add
[   10.320019] PM: Adding info for No Bus:ptyq6
[   10.324051] device: 'ptyq7': device_add
[   10.328030] PM: Adding info for No Bus:ptyq7
[   10.332052] device: 'ptyq8': device_add
[   10.336027] PM: Adding info for No Bus:ptyq8
[   10.340051] device: 'ptyq9': device_add
[   10.344018] PM: Adding info for No Bus:ptyq9
[   10.348050] device: 'ptyqa': device_add
[   10.352018] PM: Adding info for No Bus:ptyqa
[   10.356050] device: 'ptyqb': device_add
[   10.360018] PM: Adding info for No Bus:ptyqb
[   10.364050] device: 'ptyqc': device_add
[   10.368018] PM: Adding info for No Bus:ptyqc
[   10.376006] device: 'ptyqd': device_add
[   10.379857] PM: Adding info for No Bus:ptyqd
[   10.380050] device: 'ptyqe': device_add
[   10.384027] PM: Adding info for No Bus:ptyqe
[   10.388051] device: 'ptyqf': device_add
[   10.392018] PM: Adding info for No Bus:ptyqf
[   10.396058] device: 'ptyr0': device_add
[   10.400019] PM: Adding info for No Bus:ptyr0
[   10.404051] device: 'ptyr1': device_add
[   10.408018] PM: Adding info for No Bus:ptyr1
[   10.412050] device: 'ptyr2': device_add
[   10.416019] PM: Adding info for No Bus:ptyr2
[   10.420058] device: 'ptyr3': device_add
[   10.424020] PM: Adding info for No Bus:ptyr3
[   10.428051] device: 'ptyr4': device_add
[   10.432028] PM: Adding info for No Bus:ptyr4
[   10.436052] device: 'ptyr5': device_add
[   10.440019] PM: Adding info for No Bus:ptyr5
[   10.444050] device: 'ptyr6': device_add
[   10.448019] PM: Adding info for No Bus:ptyr6
[   10.452050] device: 'ptyr7': device_add
[   10.456019] PM: Adding info for No Bus:ptyr7
[   10.460050] device: 'ptyr8': device_add
[   10.464019] PM: Adding info for No Bus:ptyr8
[   10.468050] device: 'ptyr9': device_add
[   10.472019] PM: Adding info for No Bus:ptyr9
[   10.476060] device: 'ptyra': device_add
[   10.480029] PM: Adding info for No Bus:ptyra
[   10.484052] device: 'ptyrb': device_add
[   10.488020] PM: Adding info for No Bus:ptyrb
[   10.492050] device: 'ptyrc': device_add
[   10.496020] PM: Adding info for No Bus:ptyrc
[   10.500050] device: 'ptyrd': device_add
[   10.504020] PM: Adding info for No Bus:ptyrd
[   10.508050] device: 'ptyre': device_add
[   10.512020] PM: Adding info for No Bus:ptyre
[   10.516050] device: 'ptyrf': device_add
[   10.520020] PM: Adding info for No Bus:ptyrf
[   10.524058] device: 'ptys0': device_add
[   10.528030] PM: Adding info for No Bus:ptys0
[   10.532052] device: 'ptys1': device_add
[   10.536020] PM: Adding info for No Bus:ptys1
[   10.540050] device: 'ptys2': device_add
[   10.544020] PM: Adding info for No Bus:ptys2
[   10.548050] device: 'ptys3': device_add
[   10.552020] PM: Adding info for No Bus:ptys3
[   10.556050] device: 'ptys4': device_add
[   10.559898] PM: Adding info for No Bus:ptys4
[   10.560050] device: 'ptys5': device_add
[   10.564020] PM: Adding info for No Bus:ptys5
[   10.568050] device: 'ptys6': device_add
[   10.572030] PM: Adding info for No Bus:ptys6
[   10.576051] device: 'ptys7': device_add
[   10.580021] PM: Adding info for No Bus:ptys7
[   10.584051] device: 'ptys8': device_add
[   10.588021] PM: Adding info for No Bus:ptys8
[   10.592050] device: 'ptys9': device_add
[   10.596031] PM: Adding info for No Bus:ptys9
[   10.600052] device: 'ptysa': device_add
[   10.604021] PM: Adding info for No Bus:ptysa
[   10.608050] device: 'ptysb': device_add
[   10.612021] PM: Adding info for No Bus:ptysb
[   10.616058] device: 'ptysc': device_add
[   10.620041] PM: Adding info for No Bus:ptysc
[   10.624059] device: 'ptysd': device_add
[   10.628022] PM: Adding info for No Bus:ptysd
[   10.632051] device: 'ptyse': device_add
[   10.636021] PM: Adding info for No Bus:ptyse
[   10.640050] device: 'ptysf': device_add
[   10.644021] PM: Adding info for No Bus:ptysf
[   10.648050] device: 'ptyt0': device_add
[   10.652021] PM: Adding info for No Bus:ptyt0
[   10.656050] device: 'ptyt1': device_add
[   10.660021] PM: Adding info for No Bus:ptyt1
[   10.664050] device: 'ptyt2': device_add
[   10.668031] PM: Adding info for No Bus:ptyt2
[   10.672052] device: 'ptyt3': device_add
[   10.676022] PM: Adding info for No Bus:ptyt3
[   10.680050] device: 'ptyt4': device_add
[   10.684022] PM: Adding info for No Bus:ptyt4
[   10.688050] device: 'ptyt5': device_add
[   10.692022] PM: Adding info for No Bus:ptyt5
[   10.696050] device: 'ptyt6': device_add
[   10.700022] PM: Adding info for No Bus:ptyt6
[   10.704050] device: 'ptyt7': device_add
[   10.708022] PM: Adding info for No Bus:ptyt7
[   10.712050] device: 'ptyt8': device_add
[   10.716032] PM: Adding info for No Bus:ptyt8
[   10.720052] device: 'ptyt9': device_add
[   10.724022] PM: Adding info for No Bus:ptyt9
[   10.728058] device: 'ptyta': device_add
[   10.732023] PM: Adding info for No Bus:ptyta
[   10.736051] device: 'ptytb': device_add
[   10.739898] PM: Adding info for No Bus:ptytb
[   10.740050] device: 'ptytc': device_add
[   10.744022] PM: Adding info for No Bus:ptytc
[   10.748050] device: 'ptytd': device_add
[   10.752022] PM: Adding info for No Bus:ptytd
[   10.756050] device: 'ptyte': device_add
[   10.760042] PM: Adding info for No Bus:ptyte
[   10.764052] device: 'ptytf': device_add
[   10.768023] PM: Adding info for No Bus:ptytf
[   10.772050] device: 'ptyu0': device_add
[   10.776022] PM: Adding info for No Bus:ptyu0
[   10.780050] device: 'ptyu1': device_add
[   10.784023] PM: Adding info for No Bus:ptyu1
[   10.788050] device: 'ptyu2': device_add
[   10.792023] PM: Adding info for No Bus:ptyu2
[   10.796050] device: 'ptyu3': device_add
[   10.800023] PM: Adding info for No Bus:ptyu3
[   10.804050] device: 'ptyu4': device_add
[   10.808033] PM: Adding info for No Bus:ptyu4
[   10.812052] device: 'ptyu5': device_add
[   10.816029] PM: Adding info for No Bus:ptyu5
[   10.820051] device: 'ptyu6': device_add
[   10.824023] PM: Adding info for No Bus:ptyu6
[   10.828058] device: 'ptyu7': device_add
[   10.832024] PM: Adding info for No Bus:ptyu7
[   10.836059] device: 'ptyu8': device_add
[   10.840026] PM: Adding info for No Bus:ptyu8
[   10.844051] device: 'ptyu9': device_add
[   10.848023] PM: Adding info for No Bus:ptyu9
[   10.852050] device: 'ptyua': device_add
[   10.856033] PM: Adding info for No Bus:ptyua
[   10.860052] device: 'ptyub': device_add
[   10.864023] PM: Adding info for No Bus:ptyub
[   10.868051] device: 'ptyuc': device_add
[   10.872023] PM: Adding info for No Bus:ptyuc
[   10.876050] device: 'ptyud': device_add
[   10.880024] PM: Adding info for No Bus:ptyud
[   10.884050] device: 'ptyue': device_add
[   10.888024] PM: Adding info for No Bus:ptyue
[   10.892050] device: 'ptyuf': device_add
[   10.896024] PM: Adding info for No Bus:ptyuf
[   10.900050] device: 'ptyv0': device_add
[   10.904043] PM: Adding info for No Bus:ptyv0
[   10.912031] device: 'ptyv1': device_add
[   10.915885] PM: Adding info for No Bus:ptyv1
[   10.916050] device: 'ptyv2': device_add
[   10.920024] PM: Adding info for No Bus:ptyv2
[   10.924050] device: 'ptyv3': device_add
[   10.928024] PM: Adding info for No Bus:ptyv3
[   10.932058] device: 'ptyv4': device_add
[   10.936025] PM: Adding info for No Bus:ptyv4
[   10.940051] device: 'ptyv5': device_add
[   10.944024] PM: Adding info for No Bus:ptyv5
[   10.948050] device: 'ptyv6': device_add
[   10.952033] PM: Adding info for No Bus:ptyv6
[   10.956052] device: 'ptyv7': device_add
[   10.960024] PM: Adding info for No Bus:ptyv7
[   10.964050] device: 'ptyv8': device_add
[   10.968024] PM: Adding info for No Bus:ptyv8
[   10.972050] device: 'ptyv9': device_add
[   10.976024] PM: Adding info for No Bus:ptyv9
[   10.980050] device: 'ptyva': device_add
[   10.984025] PM: Adding info for No Bus:ptyva
[   10.988050] device: 'ptyvb': device_add
[   10.992025] PM: Adding info for No Bus:ptyvb
[   10.996050] device: 'ptyvc': device_add
[   11.000034] PM: Adding info for No Bus:ptyvc
[   11.004052] device: 'ptyvd': device_add
[   11.008025] PM: Adding info for No Bus:ptyvd
[   11.012051] device: 'ptyve': device_add
[   11.016025] PM: Adding info for No Bus:ptyve
[   11.020050] device: 'ptyvf': device_add
[   11.024025] PM: Adding info for No Bus:ptyvf
[   11.028050] device: 'ptyw0': device_add
[   11.032025] PM: Adding info for No Bus:ptyw0
[   11.036061] device: 'ptyw1': device_add
[   11.040026] PM: Adding info for No Bus:ptyw1
[   11.044051] device: 'ptyw2': device_add
[   11.048035] PM: Adding info for No Bus:ptyw2
[   11.052062] device: 'ptyw3': device_add
[   11.056027] PM: Adding info for No Bus:ptyw3
[   11.060059] device: 'ptyw4': device_add
[   11.064026] PM: Adding info for No Bus:ptyw4
[   11.068051] device: 'ptyw5': device_add
[   11.072025] PM: Adding info for No Bus:ptyw5
[   11.076050] device: 'ptyw6': device_add
[   11.080026] PM: Adding info for No Bus:ptyw6
[   11.084050] device: 'ptyw7': device_add
[   11.088026] PM: Adding info for No Bus:ptyw7
[   11.092050] device: 'ptyw8': device_add
[   11.096012] PM: Adding info for No Bus:ptyw8
[   11.100051] device: 'ptyw9': device_add
[   11.104036] PM: Adding info for No Bus:ptyw9
[   11.108052] device: 'ptywa': device_add
[   11.112027] PM: Adding info for No Bus:ptywa
[   11.116050] device: 'ptywb': device_add
[   11.120026] PM: Adding info for No Bus:ptywb
[   11.124050] device: 'ptywc': device_add
[   11.128026] PM: Adding info for No Bus:ptywc
[   11.132050] device: 'ptywd': device_add
[   11.136026] PM: Adding info for No Bus:ptywd
[   11.140058] device: 'ptywe': device_add
[   11.144037] PM: Adding info for No Bus:ptywe
[   11.148052] device: 'ptywf': device_add
[   11.152026] PM: Adding info for No Bus:ptywf
[   11.156050] device: 'ptyx0': device_add
[   11.160027] PM: Adding info for No Bus:ptyx0
[   11.164050] device: 'ptyx1': device_add
[   11.168027] PM: Adding info for No Bus:ptyx1
[   11.172050] device: 'ptyx2': device_add
[   11.176046] PM: Adding info for No Bus:ptyx2
[   11.180051] device: 'ptyx3': device_add
[   11.184034] PM: Adding info for No Bus:ptyx3
[   11.188051] device: 'ptyx4': device_add
[   11.192041] PM: Adding info for No Bus:ptyx4
[   11.196052] device: 'ptyx5': device_add
[   11.200038] PM: Adding info for No Bus:ptyx5
[   11.204052] device: 'ptyx6': device_add
[   11.208027] PM: Adding info for No Bus:ptyx6
[   11.212051] device: 'ptyx7': device_add
[   11.216027] PM: Adding info for No Bus:ptyx7
[   11.220050] device: 'ptyx8': device_add
[   11.224027] PM: Adding info for No Bus:ptyx8
[   11.228051] device: 'ptyx9': device_add
[   11.232027] PM: Adding info for No Bus:ptyx9
[   11.236051] device: 'ptyxa': device_add
[   11.240037] PM: Adding info for No Bus:ptyxa
[   11.244059] device: 'ptyxb': device_add
[   11.248029] PM: Adding info for No Bus:ptyxb
[   11.252051] device: 'ptyxc': device_add
[   11.256027] PM: Adding info for No Bus:ptyxc
[   11.264032] device: 'ptyxd': device_add
[   11.267885] PM: Adding info for No Bus:ptyxd
[   11.268051] device: 'ptyxe': device_add
[   11.272027] PM: Adding info for No Bus:ptyxe
[   11.276050] device: 'ptyxf': device_add
[   11.280028] PM: Adding info for No Bus:ptyxf
[   11.284059] device: 'ptyy0': device_add
[   11.288038] PM: Adding info for No Bus:ptyy0
[   11.292052] device: 'ptyy1': device_add
[   11.296028] PM: Adding info for No Bus:ptyy1
[   11.300051] device: 'ptyy2': device_add
[   11.304028] PM: Adding info for No Bus:ptyy2
[   11.308050] device: 'ptyy3': device_add
[   11.312028] PM: Adding info for No Bus:ptyy3
[   11.316050] device: 'ptyy4': device_add
[   11.320028] PM: Adding info for No Bus:ptyy4
[   11.324050] device: 'ptyy5': device_add
[   11.328028] PM: Adding info for No Bus:ptyy5
[   11.332050] device: 'ptyy6': device_add
[   11.336037] PM: Adding info for No Bus:ptyy6
[   11.340052] device: 'ptyy7': device_add
[   11.344039] PM: Adding info for No Bus:ptyy7
[   11.348059] device: 'ptyy8': device_add
[   11.352031] PM: Adding info for No Bus:ptyy8
[   11.356051] device: 'ptyy9': device_add
[   11.360028] PM: Adding info for No Bus:ptyy9
[   11.364050] device: 'ptyya': device_add
[   11.368028] PM: Adding info for No Bus:ptyya
[   11.372050] device: 'ptyyb': device_add
[   11.376028] PM: Adding info for No Bus:ptyyb
[   11.380050] device: 'ptyyc': device_add
[   11.384038] PM: Adding info for No Bus:ptyyc
[   11.388052] device: 'ptyyd': device_add
[   11.392029] PM: Adding info for No Bus:ptyyd
[   11.396050] device: 'ptyye': device_add
[   11.400029] PM: Adding info for No Bus:ptyye
[   11.404050] device: 'ptyyf': device_add
[   11.408029] PM: Adding info for No Bus:ptyyf
[   11.412050] device: 'ptyz0': device_add
[   11.416029] PM: Adding info for No Bus:ptyz0
[   11.420050] device: 'ptyz1': device_add
[   11.424029] PM: Adding info for No Bus:ptyz1
[   11.428050] device: 'ptyz2': device_add
[   11.432039] PM: Adding info for No Bus:ptyz2
[   11.436052] device: 'ptyz3': device_add
[   11.439915] PM: Adding info for No Bus:ptyz3
[   11.440050] device: 'ptyz4': device_add
[   11.444029] PM: Adding info for No Bus:ptyz4
[   11.448058] device: 'ptyz5': device_add
[   11.452030] PM: Adding info for No Bus:ptyz5
[   11.456051] device: 'ptyz6': device_add
[   11.460029] PM: Adding info for No Bus:ptyz6
[   11.464050] device: 'ptyz7': device_add
[   11.468029] PM: Adding info for No Bus:ptyz7
[   11.472050] device: 'ptyz8': device_add
[   11.476039] PM: Adding info for No Bus:ptyz8
[   11.480052] device: 'ptyz9': device_add
[   11.484040] PM: Adding info for No Bus:ptyz9
[   11.488052] device: 'ptyza': device_add
[   11.492030] PM: Adding info for No Bus:ptyza
[   11.496050] device: 'ptyzb': device_add
[   11.500029] PM: Adding info for No Bus:ptyzb
[   11.504059] device: 'ptyzc': device_add
[   11.508031] PM: Adding info for No Bus:ptyzc
[   11.512051] device: 'ptyzd': device_add
[   11.516029] PM: Adding info for No Bus:ptyzd
[   11.520050] device: 'ptyze': device_add
[   11.524040] PM: Adding info for No Bus:ptyze
[   11.528052] device: 'ptyzf': device_add
[   11.532030] PM: Adding info for No Bus:ptyzf
[   11.536050] device: 'ptya0': device_add
[   11.540030] PM: Adding info for No Bus:ptya0
[   11.544050] device: 'ptya1': device_add
[   11.548030] PM: Adding info for No Bus:ptya1
[   11.552058] device: 'ptya2': device_add
[   11.556032] PM: Adding info for No Bus:ptya2
[   11.560051] device: 'ptya3': device_add
[   11.564030] PM: Adding info for No Bus:ptya3
[   11.568051] device: 'ptya4': device_add
[   11.572040] PM: Adding info for No Bus:ptya4
[   11.576052] device: 'ptya5': device_add
[   11.580030] PM: Adding info for No Bus:ptya5
[   11.584051] device: 'ptya6': device_add
[   11.588030] PM: Adding info for No Bus:ptya6
[   11.592051] device: 'ptya7': device_add
[   11.596030] PM: Adding info for No Bus:ptya7
[   11.600050] device: 'ptya8': device_add
[   11.604030] PM: Adding info for No Bus:ptya8
[   11.608051] device: 'ptya9': device_add
[   11.612041] PM: Adding info for No Bus:ptya9
[   11.616052] device: 'ptyaa': device_add
[   11.620041] PM: Adding info for No Bus:ptyaa
[   11.624052] device: 'ptyab': device_add
[   11.628031] PM: Adding info for No Bus:ptyab
[   11.632061] device: 'ptyac': device_add
[   11.636032] PM: Adding info for No Bus:ptyac
[   11.640051] device: 'ptyad': device_add
[   11.644031] PM: Adding info for No Bus:ptyad
[   11.648051] device: 'ptyae': device_add
[   11.652031] PM: Adding info for No Bus:ptyae
[   11.656058] device: 'ptyaf': device_add
[   11.660033] PM: Adding info for No Bus:ptyaf
[   11.664051] device: 'ptyb0': device_add
[   11.668041] PM: Adding info for No Bus:ptyb0
[   11.672052] device: 'ptyb1': device_add
[   11.676031] PM: Adding info for No Bus:ptyb1
[   11.680051] device: 'ptyb2': device_add
[   11.684032] PM: Adding info for No Bus:ptyb2
[   11.688051] device: 'ptyb3': device_add
[   11.692031] PM: Adding info for No Bus:ptyb3
[   11.696051] device: 'ptyb4': device_add
[   11.700031] PM: Adding info for No Bus:ptyb4
[   11.704051] device: 'ptyb5': device_add
[   11.708031] PM: Adding info for No Bus:ptyb5
[   11.712051] device: 'ptyb6': device_add
[   11.716044] PM: Adding info for No Bus:ptyb6
[   11.720052] device: 'ptyb7': device_add
[   11.724032] PM: Adding info for No Bus:ptyb7
[   11.728059] device: 'ptyb8': device_add
[   11.732033] PM: Adding info for No Bus:ptyb8
[   11.736051] device: 'ptyb9': device_add
[   11.740031] PM: Adding info for No Bus:ptyb9
[   11.744051] device: 'ptyba': device_add
[   11.748032] PM: Adding info for No Bus:ptyba
[   11.752051] device: 'ptybb': device_add
[   11.756031] PM: Adding info for No Bus:ptybb
[   11.760058] device: 'ptybc': device_add
[   11.764043] PM: Adding info for No Bus:ptybc
[   11.768052] device: 'ptybd': device_add
[   11.772032] PM: Adding info for No Bus:ptybd
[   11.776050] device: 'ptybe': device_add
[   11.779920] PM: Adding info for No Bus:ptybe
[   11.780052] device: 'ptybf': device_add
[   11.784032] PM: Adding info for No Bus:ptybf
[   11.788050] device: 'ptyc0': device_add
[   11.792032] PM: Adding info for No Bus:ptyc0
[   11.796050] device: 'ptyc1': device_add
[   11.800032] PM: Adding info for No Bus:ptyc1
[   11.804050] device: 'ptyc2': device_add
[   11.808042] PM: Adding info for No Bus:ptyc2
[   11.812052] device: 'ptyc3': device_add
[   11.816040] PM: Adding info for No Bus:ptyc3
[   11.820051] device: 'ptyc4': device_add
[   11.824032] PM: Adding info for No Bus:ptyc4
[   11.828051] device: 'ptyc5': device_add
[   11.832032] PM: Adding info for No Bus:ptyc5
[   11.836050] device: 'ptyc6': device_add
[   11.840032] PM: Adding info for No Bus:ptyc6
[   11.844051] device: 'ptyc7': device_add
[   11.848032] PM: Adding info for No Bus:ptyc7
[   11.852051] device: 'ptyc8': device_add
[   11.856043] PM: Adding info for No Bus:ptyc8
[   11.860060] device: 'ptyc9': device_add
[   11.864036] PM: Adding info for No Bus:ptyc9
[   11.868051] device: 'ptyca': device_add
[   11.872033] PM: Adding info for No Bus:ptyca
[   11.876051] device: 'ptycb': device_add
[   11.880033] PM: Adding info for No Bus:ptycb
[   11.884051] device: 'ptycc': device_add
[   11.888033] PM: Adding info for No Bus:ptycc
[   11.892051] device: 'ptycd': device_add
[   11.896033] PM: Adding info for No Bus:ptycd
[   11.900051] device: 'ptyce': device_add
[   11.904043] PM: Adding info for No Bus:ptyce
[   11.908052] device: 'ptycf': device_add
[   11.912033] PM: Adding info for No Bus:ptycf
[   11.916051] device: 'ptyd0': device_add
[   11.920045] PM: Adding info for No Bus:ptyd0
[   11.924052] device: 'ptyd1': device_add
[   11.928033] PM: Adding info for No Bus:ptyd1
[   11.932051] device: 'ptyd2': device_add
[   11.936034] PM: Adding info for No Bus:ptyd2
[   11.944006] device: 'ptyd3': device_add
[   11.947871] PM: Adding info for No Bus:ptyd3
[   11.948059] device: 'ptyd4': device_add
[   11.952045] PM: Adding info for No Bus:ptyd4
[   11.956052] device: 'ptyd5': device_add
[   11.960034] PM: Adding info for No Bus:ptyd5
[   11.964058] device: 'ptyd6': device_add
[   11.968035] PM: Adding info for No Bus:ptyd6
[   11.972051] device: 'ptyd7': device_add
[   11.976034] PM: Adding info for No Bus:ptyd7
[   11.980051] device: 'ptyd8': device_add
[   11.984034] PM: Adding info for No Bus:ptyd8
[   11.988051] device: 'ptyd9': device_add
[   11.992034] PM: Adding info for No Bus:ptyd9
[   11.996051] device: 'ptyda': device_add
[   12.000044] PM: Adding info for No Bus:ptyda
[   12.004052] device: 'ptydb': device_add
[   12.008035] PM: Adding info for No Bus:ptydb
[   12.012051] device: 'ptydc': device_add
[   12.016034] PM: Adding info for No Bus:ptydc
[   12.020051] device: 'ptydd': device_add
[   12.024034] PM: Adding info for No Bus:ptydd
[   12.028051] device: 'ptyde': device_add
[   12.032034] PM: Adding info for No Bus:ptyde
[   12.036051] device: 'ptydf': device_add
[   12.040034] PM: Adding info for No Bus:ptydf
[   12.044051] device: 'ptye0': device_add
[   12.048045] PM: Adding info for No Bus:ptye0
[   12.052052] device: 'ptye1': device_add
[   12.056035] PM: Adding info for No Bus:ptye1
[   12.060051] device: 'ptye2': device_add
[   12.064046] PM: Adding info for No Bus:ptye2
[   12.068059] device: 'ptye3': device_add
[   12.072036] PM: Adding info for No Bus:ptye3
[   12.076051] device: 'ptye4': device_add
[   12.080035] PM: Adding info for No Bus:ptye4
[   12.084051] device: 'ptye5': device_add
[   12.088035] PM: Adding info for No Bus:ptye5
[   12.092051] device: 'ptye6': device_add
[   12.096045] PM: Adding info for No Bus:ptye6
[   12.100052] device: 'ptye7': device_add
[   12.104035] PM: Adding info for No Bus:ptye7
[   12.112032] device: 'ptye8': device_add
[   12.115900] PM: Adding info for No Bus:ptye8
[   12.116051] device: 'ptye9': device_add
[   12.120047] PM: Adding info for No Bus:ptye9
[   12.124052] device: 'ptyea': device_add
[   12.128037] PM: Adding info for No Bus:ptyea
[   12.132051] device: 'ptyeb': device_add
[   12.136035] PM: Adding info for No Bus:ptyeb
[   12.140051] device: 'ptyec': device_add
[   12.144046] PM: Adding info for No Bus:ptyec
[   12.148052] device: 'ptyed': device_add
[   12.152036] PM: Adding info for No Bus:ptyed
[   12.156051] device: 'ptyee': device_add
[   12.160036] PM: Adding info for No Bus:ptyee
[   12.164051] device: 'ptyef': device_add
[   12.168036] PM: Adding info for No Bus:ptyef
[   12.172080] device: 'ttyp0': device_add
[   12.176033] PM: Adding info for No Bus:ttyp0
[   12.180051] device: 'ttyp1': device_add
[   12.184032] PM: Adding info for No Bus:ttyp1
[   12.188051] device: 'ttyp2': device_add
[   12.192043] PM: Adding info for No Bus:ttyp2
[   12.196052] device: 'ttyp3': device_add
[   12.200032] PM: Adding info for No Bus:ttyp3
[   12.204051] device: 'ttyp4': device_add
[   12.208032] PM: Adding info for No Bus:ttyp4
[   12.212061] device: 'ttyp5': device_add
[   12.216034] PM: Adding info for No Bus:ttyp5
[   12.220051] device: 'ttyp6': device_add
[   12.224032] PM: Adding info for No Bus:ttyp6
[   12.228051] device: 'ttyp7': device_add
[   12.232032] PM: Adding info for No Bus:ttyp7
[   12.236051] device: 'ttyp8': device_add
[   12.240042] PM: Adding info for No Bus:ttyp8
[   12.244052] device: 'ttyp9': device_add
[   12.248032] PM: Adding info for No Bus:ttyp9
[   12.252051] device: 'ttypa': device_add
[   12.256032] PM: Adding info for No Bus:ttypa
[   12.260051] device: 'ttypb': device_add
[   12.264032] PM: Adding info for No Bus:ttypb
[   12.268051] device: 'ttypc': device_add
[   12.272032] PM: Adding info for No Bus:ttypc
[   12.280040] device: 'ttypd': device_add
[   12.283900] PM: Adding info for No Bus:ttypd
[   12.284052] device: 'ttype': device_add
[   12.288043] PM: Adding info for No Bus:ttype
[   12.292052] device: 'ttypf': device_add
[   12.296033] PM: Adding info for No Bus:ttypf
[   12.300051] device: 'ttyq0': device_add
[   12.304054] PM: Adding info for No Bus:ttyq0
[   12.308051] device: 'ttyq1': device_add
[   12.312040] PM: Adding info for No Bus:ttyq1
[   12.316051] device: 'ttyq2': device_add
[   12.320036] PM: Adding info for No Bus:ttyq2
[   12.324051] device: 'ttyq3': device_add
[   12.328033] PM: Adding info for No Bus:ttyq3
[   12.332051] device: 'ttyq4': device_add
[   12.336044] PM: Adding info for No Bus:ttyq4
[   12.340052] device: 'ttyq5': device_add
[   12.344033] PM: Adding info for No Bus:ttyq5
[   12.348051] device: 'ttyq6': device_add
[   12.352033] PM: Adding info for No Bus:ttyq6
[   12.356051] device: 'ttyq7': device_add
[   12.360045] PM: Adding info for No Bus:ttyq7
[   12.364052] device: 'ttyq8': device_add
[   12.368033] PM: Adding info for No Bus:ttyq8
[   12.372051] device: 'ttyq9': device_add
[   12.376034] PM: Adding info for No Bus:ttyq9
[   12.380058] device: 'ttyqa': device_add
[   12.384045] PM: Adding info for No Bus:ttyqa
[   12.388064] device: 'ttyqb': device_add
[   12.392035] PM: Adding info for No Bus:ttyqb
[   12.396051] device: 'ttyqc': device_add
[   12.400034] PM: Adding info for No Bus:ttyqc
[   12.404051] device: 'ttyqd': device_add
[   12.408033] PM: Adding info for No Bus:ttyqd
[   12.412051] device: 'ttyqe': device_add
[   12.416034] PM: Adding info for No Bus:ttyqe
[   12.420051] device: 'ttyqf': device_add
[   12.424034] PM: Adding info for No Bus:ttyqf
[   12.428051] device: 'ttyr0': device_add
[   12.432044] PM: Adding info for No Bus:ttyr0
[   12.436052] device: 'ttyr1': device_add
[   12.440034] PM: Adding info for No Bus:ttyr1
[   12.444051] device: 'ttyr2': device_add
[   12.447910] PM: Adding info for No Bus:ttyr2
[   12.448051] device: 'ttyr3': device_add
[   12.452034] PM: Adding info for No Bus:ttyr3
[   12.456051] device: 'ttyr4': device_add
[   12.460034] PM: Adding info for No Bus:ttyr4
[   12.464051] device: 'ttyr5': device_add
[   12.468034] PM: Adding info for No Bus:ttyr5
[   12.472051] device: 'ttyr6': device_add
[   12.476044] PM: Adding info for No Bus:ttyr6
[   12.480060] device: 'ttyr7': device_add
[   12.484036] PM: Adding info for No Bus:ttyr7
[   12.488051] device: 'ttyr8': device_add
[   12.492034] PM: Adding info for No Bus:ttyr8
[   12.496051] device: 'ttyr9': device_add
[   12.500046] PM: Adding info for No Bus:ttyr9
[   12.504052] device: 'ttyra': device_add
[   12.508036] PM: Adding info for No Bus:ttyra
[   12.512051] device: 'ttyrb': device_add
[   12.516035] PM: Adding info for No Bus:ttyrb
[   12.520051] device: 'ttyrc': device_add
[   12.524045] PM: Adding info for No Bus:ttyrc
[   12.528052] device: 'ttyrd': device_add
[   12.532036] PM: Adding info for No Bus:ttyrd
[   12.536051] device: 'ttyre': device_add
[   12.540035] PM: Adding info for No Bus:ttyre
[   12.544051] device: 'ttyrf': device_add
[   12.548035] PM: Adding info for No Bus:ttyrf
[   12.552051] device: 'ttys0': device_add
[   12.556035] PM: Adding info for No Bus:ttys0
[   12.560051] device: 'ttys1': device_add
[   12.564035] PM: Adding info for No Bus:ttys1
[   12.568051] device: 'ttys2': device_add
[   12.572046] PM: Adding info for No Bus:ttys2
[   12.576052] device: 'ttys3': device_add
[   12.580036] PM: Adding info for No Bus:ttys3
[   12.584059] device: 'ttys4': device_add
[   12.588038] PM: Adding info for No Bus:ttys4
[   12.592052] device: 'ttys5': device_add
[   12.596035] PM: Adding info for No Bus:ttys5
[   12.600051] device: 'ttys6': device_add
[   12.604035] PM: Adding info for No Bus:ttys6
[   12.608059] device: 'ttys7': device_add
[   12.611922] PM: Adding info for No Bus:ttys7
[   12.612052] device: 'ttys8': device_add
[   12.616046] PM: Adding info for No Bus:ttys8
[   12.620052] device: 'ttys9': device_add
[   12.624046] PM: Adding info for No Bus:ttys9
[   12.628052] device: 'ttysa': device_add
[   12.632038] PM: Adding info for No Bus:ttysa
[   12.636051] device: 'ttysb': device_add
[   12.640047] PM: Adding info for No Bus:ttysb
[   12.644052] device: 'ttysc': device_add
[   12.648037] PM: Adding info for No Bus:ttysc
[   12.652051] device: 'ttysd': device_add
[   12.656036] PM: Adding info for No Bus:ttysd
[   12.660051] device: 'ttyse': device_add
[   12.664047] PM: Adding info for No Bus:ttyse
[   12.668052] device: 'ttysf': device_add
[   12.672037] PM: Adding info for No Bus:ttysf
[   12.676051] device: 'ttyt0': device_add
[   12.680037] PM: Adding info for No Bus:ttyt0
[   12.684059] device: 'ttyt1': device_add
[   12.688038] PM: Adding info for No Bus:ttyt1
[   12.692051] device: 'ttyt2': device_add
[   12.696036] PM: Adding info for No Bus:ttyt2
[   12.700051] device: 'ttyt3': device_add
[   12.704037] PM: Adding info for No Bus:ttyt3
[   12.708051] device: 'ttyt4': device_add
[   12.712047] PM: Adding info for No Bus:ttyt4
[   12.716052] device: 'ttyt5': device_add
[   12.720037] PM: Adding info for No Bus:ttyt5
[   12.724051] device: 'ttyt6': device_add
[   12.728037] PM: Adding info for No Bus:ttyt6
[   12.732051] device: 'ttyt7': device_add
[   12.736036] PM: Adding info for No Bus:ttyt7
[   12.740051] device: 'ttyt8': device_add
[   12.744037] PM: Adding info for No Bus:ttyt8
[   12.748051] device: 'ttyt9': device_add
[   12.752037] PM: Adding info for No Bus:ttyt9
[   12.756051] device: 'ttyta': device_add
[   12.760048] PM: Adding info for No Bus:ttyta
[   12.764052] device: 'ttytb': device_add
[   12.768038] PM: Adding info for No Bus:ttytb
[   12.772051] device: 'ttytc': device_add
[   12.776033] PM: Adding info for No Bus:ttytc
[   12.780051] device: 'ttytd': device_add
[   12.784037] PM: Adding info for No Bus:ttytd
[   12.788069] device: 'ttyte': device_add
[   12.792040] PM: Adding info for No Bus:ttyte
[   12.796051] device: 'ttytf': device_add
[   12.800037] PM: Adding info for No Bus:ttytf
[   12.804051] device: 'ttyu0': device_add
[   12.808049] PM: Adding info for No Bus:ttyu0
[   12.812052] device: 'ttyu1': device_add
[   12.816047] PM: Adding info for No Bus:ttyu1
[   12.820051] device: 'ttyu2': device_add
[   12.824038] PM: Adding info for No Bus:ttyu2
[   12.828059] device: 'ttyu3': device_add
[   12.832039] PM: Adding info for No Bus:ttyu3
[   12.836051] device: 'ttyu4': device_add
[   12.840038] PM: Adding info for No Bus:ttyu4
[   12.844051] device: 'ttyu5': device_add
[   12.848038] PM: Adding info for No Bus:ttyu5
[   12.852051] device: 'ttyu6': device_add
[   12.856050] PM: Adding info for No Bus:ttyu6
[   12.860052] device: 'ttyu7': device_add
[   12.864040] PM: Adding info for No Bus:ttyu7
[   12.868051] device: 'ttyu8': device_add
[   12.872040] PM: Adding info for No Bus:ttyu8
[   12.876051] device: 'ttyu9': device_add
[   12.880039] PM: Adding info for No Bus:ttyu9
[   12.884051] device: 'ttyua': device_add
[   12.888041] PM: Adding info for No Bus:ttyua
[   12.892059] device: 'ttyub': device_add
[   12.896041] PM: Adding info for No Bus:ttyub
[   12.900052] device: 'ttyuc': device_add
[   12.904050] PM: Adding info for No Bus:ttyuc
[   12.908052] device: 'ttyud': device_add
[   12.912041] PM: Adding info for No Bus:ttyud
[   12.916051] device: 'ttyue': device_add
[   12.920040] PM: Adding info for No Bus:ttyue
[   12.924051] device: 'ttyuf': device_add
[   12.928040] PM: Adding info for No Bus:ttyuf
[   12.932051] device: 'ttyv0': device_add
[   12.935932] PM: Adding info for No Bus:ttyv0
[   12.936053] device: 'ttyv1': device_add
[   12.940041] PM: Adding info for No Bus:ttyv1
[   12.944051] device: 'ttyv2': device_add
[   12.948051] PM: Adding info for No Bus:ttyv2
[   12.952052] device: 'ttyv3': device_add
[   12.956041] PM: Adding info for No Bus:ttyv3
[   12.960051] device: 'ttyv4': device_add
[   12.964041] PM: Adding info for No Bus:ttyv4
[   12.968051] device: 'ttyv5': device_add
[   12.972041] PM: Adding info for No Bus:ttyv5
[   12.976051] device: 'ttyv6': device_add
[   12.980041] PM: Adding info for No Bus:ttyv6
[   12.984051] device: 'ttyv7': device_add
[   12.988041] PM: Adding info for No Bus:ttyv7
[   12.992059] device: 'ttyv8': device_add
[   12.996054] PM: Adding info for No Bus:ttyv8
[   13.000053] device: 'ttyv9': device_add
[   13.004042] PM: Adding info for No Bus:ttyv9
[   13.008051] device: 'ttyva': device_add
[   13.012042] PM: Adding info for No Bus:ttyva
[   13.016051] device: 'ttyvb': device_add
[   13.020042] PM: Adding info for No Bus:ttyvb
[   13.024051] device: 'ttyvc': device_add
[   13.028042] PM: Adding info for No Bus:ttyvc
[   13.032051] device: 'ttyvd': device_add
[   13.036042] PM: Adding info for No Bus:ttyvd
[   13.040051] device: 'ttyve': device_add
[   13.044053] PM: Adding info for No Bus:ttyve
[   13.048061] device: 'ttyvf': device_add
[   13.052044] PM: Adding info for No Bus:ttyvf
[   13.056052] device: 'ttyw0': device_add
[   13.060042] PM: Adding info for No Bus:ttyw0
[   13.064051] device: 'ttyw1': device_add
[   13.068042] PM: Adding info for No Bus:ttyw1
[   13.072051] device: 'ttyw2': device_add
[   13.076054] PM: Adding info for No Bus:ttyw2
[   13.080052] device: 'ttyw3': device_add
[   13.084042] PM: Adding info for No Bus:ttyw3
[   13.092006] device: 'ttyw4': device_add
[   13.095891] PM: Adding info for No Bus:ttyw4
[   13.096062] device: 'ttyw5': device_add
[   13.100045] PM: Adding info for No Bus:ttyw5
[   13.104052] device: 'ttyw6': device_add
[   13.108042] PM: Adding info for No Bus:ttyw6
[   13.112051] device: 'ttyw7': device_add
[   13.116042] PM: Adding info for No Bus:ttyw7
[   13.120051] device: 'ttyw8': device_add
[   13.124043] PM: Adding info for No Bus:ttyw8
[   13.128051] device: 'ttyw9': device_add
[   13.132053] PM: Adding info for No Bus:ttyw9
[   13.136052] device: 'ttywa': device_add
[   13.140054] PM: Adding info for No Bus:ttywa
[   13.144053] device: 'ttywb': device_add
[   13.148043] PM: Adding info for No Bus:ttywb
[   13.152051] device: 'ttywc': device_add
[   13.156043] PM: Adding info for No Bus:ttywc
[   13.160051] device: 'ttywd': device_add
[   13.164043] PM: Adding info for No Bus:ttywd
[   13.168051] device: 'ttywe': device_add
[   13.172043] PM: Adding info for No Bus:ttywe
[   13.176051] device: 'ttywf': device_add
[   13.180044] PM: Adding info for No Bus:ttywf
[   13.184051] device: 'ttyx0': device_add
[   13.188054] PM: Adding info for No Bus:ttyx0
[   13.192053] device: 'ttyx1': device_add
[   13.196044] PM: Adding info for No Bus:ttyx1
[   13.200059] device: 'ttyx2': device_add
[   13.204045] PM: Adding info for No Bus:ttyx2
[   13.208052] device: 'ttyx3': device_add
[   13.212043] PM: Adding info for No Bus:ttyx3
[   13.216051] device: 'ttyx4': device_add
[   13.220055] PM: Adding info for No Bus:ttyx4
[   13.224053] device: 'ttyx5': device_add
[   13.228046] PM: Adding info for No Bus:ttyx5
[   13.232051] device: 'ttyx6': device_add
[   13.236055] PM: Adding info for No Bus:ttyx6
[   13.240053] device: 'ttyx7': device_add
[   13.244044] PM: Adding info for No Bus:ttyx7
[   13.248052] device: 'ttyx8': device_add
[   13.251921] PM: Adding info for No Bus:ttyx8
[   13.252051] device: 'ttyx9': device_add
[   13.256044] PM: Adding info for No Bus:ttyx9
[   13.260051] device: 'ttyxa': device_add
[   13.264045] PM: Adding info for No Bus:ttyxa
[   13.268059] device: 'ttyxb': device_add
[   13.272046] PM: Adding info for No Bus:ttyxb
[   13.276052] device: 'ttyxc': device_add
[   13.280055] PM: Adding info for No Bus:ttyxc
[   13.284053] device: 'ttyxd': device_add
[   13.288045] PM: Adding info for No Bus:ttyxd
[   13.292051] device: 'ttyxe': device_add
[   13.296045] PM: Adding info for No Bus:ttyxe
[   13.300059] device: 'ttyxf': device_add
[   13.304046] PM: Adding info for No Bus:ttyxf
[   13.308052] device: 'ttyy0': device_add
[   13.312045] PM: Adding info for No Bus:ttyy0
[   13.316051] device: 'ttyy1': device_add
[   13.320045] PM: Adding info for No Bus:ttyy1
[   13.324051] device: 'ttyy2': device_add
[   13.328056] PM: Adding info for No Bus:ttyy2
[   13.332053] device: 'ttyy3': device_add
[   13.336045] PM: Adding info for No Bus:ttyy3
[   13.340051] device: 'ttyy4': device_add
[   13.344046] PM: Adding info for No Bus:ttyy4
[   13.348051] device: 'ttyy5': device_add
[   13.352045] PM: Adding info for No Bus:ttyy5
[   13.356051] device: 'ttyy6': device_add
[   13.360046] PM: Adding info for No Bus:ttyy6
[   13.364062] device: 'ttyy7': device_add
[   13.368048] PM: Adding info for No Bus:ttyy7
[   13.372053] device: 'ttyy8': device_add
[   13.376057] PM: Adding info for No Bus:ttyy8
[   13.380053] device: 'ttyy9': device_add
[   13.384046] PM: Adding info for No Bus:ttyy9
[   13.388051] device: 'ttyya': device_add
[   13.392046] PM: Adding info for No Bus:ttyya
[   13.396051] device: 'ttyyb': device_add
[   13.400047] PM: Adding info for No Bus:ttyyb
[   13.404060] device: 'ttyyc': device_add
[   13.408049] PM: Adding info for No Bus:ttyyc
[   13.412052] device: 'ttyyd': device_add
[   13.416046] PM: Adding info for No Bus:ttyyd
[   13.420052] device: 'ttyye': device_add
[   13.424081] PM: Adding info for No Bus:ttyye
[   13.428053] device: 'ttyyf': device_add
[   13.432055] PM: Adding info for No Bus:ttyyf
[   13.436051] device: 'ttyz0': device_add
[   13.440047] PM: Adding info for No Bus:ttyz0
[   13.444051] device: 'ttyz1': device_add
[   13.448047] PM: Adding info for No Bus:ttyz1
[   13.452051] device: 'ttyz2': device_add
[   13.456046] PM: Adding info for No Bus:ttyz2
[   13.460051] device: 'ttyz3': device_add
[   13.464047] PM: Adding info for No Bus:ttyz3
[   13.468051] device: 'ttyz4': device_add
[   13.472057] PM: Adding info for No Bus:ttyz4
[   13.476052] device: 'ttyz5': device_add
[   13.480047] PM: Adding info for No Bus:ttyz5
[   13.484051] device: 'ttyz6': device_add
[   13.488047] PM: Adding info for No Bus:ttyz6
[   13.492060] device: 'ttyz7': device_add
[   13.496050] PM: Adding info for No Bus:ttyz7
[   13.500052] device: 'ttyz8': device_add
[   13.504047] PM: Adding info for No Bus:ttyz8
[   13.508060] device: 'ttyz9': device_add
[   13.512060] PM: Adding info for No Bus:ttyz9
[   13.516053] device: 'ttyza': device_add
[   13.520059] PM: Adding info for No Bus:ttyza
[   13.524053] device: 'ttyzb': device_add
[   13.528048] PM: Adding info for No Bus:ttyzb
[   13.532051] device: 'ttyzc': device_add
[   13.536048] PM: Adding info for No Bus:ttyzc
[   13.540052] device: 'ttyzd': device_add
[   13.544047] PM: Adding info for No Bus:ttyzd
[   13.548051] device: 'ttyze': device_add
[   13.552046] PM: Adding info for No Bus:ttyze
[   13.556051] device: 'ttyzf': device_add
[   13.559924] PM: Adding info for No Bus:ttyzf
[   13.560051] device: 'ttya0': device_add
[   13.564059] PM: Adding info for No Bus:ttya0
[   13.568053] device: 'ttya1': device_add
[   13.572048] PM: Adding info for No Bus:ttya1
[   13.576052] device: 'ttya2': device_add
[   13.580049] PM: Adding info for No Bus:ttya2
[   13.584052] device: 'ttya3': device_add
[   13.588049] PM: Adding info for No Bus:ttya3
[   13.592052] device: 'ttya4': device_add
[   13.596049] PM: Adding info for No Bus:ttya4
[   13.600051] device: 'ttya5': device_add
[   13.604049] PM: Adding info for No Bus:ttya5
[   13.608059] device: 'ttya6': device_add
[   13.612061] PM: Adding info for No Bus:ttya6
[   13.616053] device: 'ttya7': device_add
[   13.620049] PM: Adding info for No Bus:ttya7
[   13.624052] device: 'ttya8': device_add
[   13.628048] PM: Adding info for No Bus:ttya8
[   13.632052] device: 'ttya9': device_add
[   13.636060] PM: Adding info for No Bus:ttya9
[   13.640053] device: 'ttyaa': device_add
[   13.644050] PM: Adding info for No Bus:ttyaa
[   13.648052] device: 'ttyab': device_add
[   13.652061] PM: Adding info for No Bus:ttyab
[   13.656055] device: 'ttyac': device_add
[   13.660061] PM: Adding info for No Bus:ttyac
[   13.664053] device: 'ttyad': device_add
[   13.668049] PM: Adding info for No Bus:ttyad
[   13.672052] device: 'ttyae': device_add
[   13.676050] PM: Adding info for No Bus:ttyae
[   13.680052] device: 'ttyaf': device_add
[   13.684050] PM: Adding info for No Bus:ttyaf
[   13.688051] device: 'ttyb0': device_add
[   13.692049] PM: Adding info for No Bus:ttyb0
[   13.696052] device: 'ttyb1': device_add
[   13.700050] PM: Adding info for No Bus:ttyb1
[   13.704052] device: 'ttyb2': device_add
[   13.707937] PM: Adding info for No Bus:ttyb2
[   13.708069] device: 'ttyb3': device_add
[   13.712052] PM: Adding info for No Bus:ttyb3
[   13.716053] device: 'ttyb4': device_add
[   13.720049] PM: Adding info for No Bus:ttyb4
[   13.724052] device: 'ttyb5': device_add
[   13.728049] PM: Adding info for No Bus:ttyb5
[   13.732052] device: 'ttyb6': device_add
[   13.736050] PM: Adding info for No Bus:ttyb6
[   13.740052] device: 'ttyb7': device_add
[   13.744049] PM: Adding info for No Bus:ttyb7
[   13.748052] device: 'ttyb8': device_add
[   13.752060] PM: Adding info for No Bus:ttyb8
[   13.756053] device: 'ttyb9': device_add
[   13.760050] PM: Adding info for No Bus:ttyb9
[   13.764052] device: 'ttyba': device_add
[   13.768050] PM: Adding info for No Bus:ttyba
[   13.772052] device: 'ttybb': device_add
[   13.776050] PM: Adding info for No Bus:ttybb
[   13.780052] device: 'ttybc': device_add
[   13.784050] PM: Adding info for No Bus:ttybc
[   13.788052] device: 'ttybd': device_add
[   13.792062] PM: Adding info for No Bus:ttybd
[   13.796053] device: 'ttybe': device_add
[   13.800067] PM: Adding info for No Bus:ttybe
[   13.804054] device: 'ttybf': device_add
[   13.808052] PM: Adding info for No Bus:ttybf
[   13.812060] device: 'ttyc0': device_add
[   13.816066] PM: Adding info for No Bus:ttyc0
[   13.820054] device: 'ttyc1': device_add
[   13.824052] PM: Adding info for No Bus:ttyc1
[   13.828052] device: 'ttyc2': device_add
[   13.832052] PM: Adding info for No Bus:ttyc2
[   13.836053] device: 'ttyc3': device_add
[   13.840051] PM: Adding info for No Bus:ttyc3
[   13.844052] device: 'ttyc4': device_add
[   13.848062] PM: Adding info for No Bus:ttyc4
[   13.852053] device: 'ttyc5': device_add
[   13.856025] PM: Adding info for No Bus:ttyc5
[   13.860052] device: 'ttyc6': device_add
[   13.864052] PM: Adding info for No Bus:ttyc6
[   13.868052] device: 'ttyc7': device_add
[   13.872052] PM: Adding info for No Bus:ttyc7
[   13.876052] device: 'ttyc8': device_add
[   13.880051] PM: Adding info for No Bus:ttyc8
[   13.884052] device: 'ttyc9': device_add
[   13.888051] PM: Adding info for No Bus:ttyc9
[   13.892052] device: 'ttyca': device_add
[   13.896063] PM: Adding info for No Bus:ttyca
[   13.900053] device: 'ttycb': device_add
[   13.904053] PM: Adding info for No Bus:ttycb
[   13.908052] device: 'ttycc': device_add
[   13.912054] PM: Adding info for No Bus:ttycc
[   13.916060] device: 'ttycd': device_add
[   13.920055] PM: Adding info for No Bus:ttycd
[   13.924052] device: 'ttyce': device_add
[   13.928053] PM: Adding info for No Bus:ttyce
[   13.932061] device: 'ttycf': device_add
[   13.936054] PM: Adding info for No Bus:ttycf
[   13.940063] device: 'ttyd0': device_add
[   13.944067] PM: Adding info for No Bus:ttyd0
[   13.948053] device: 'ttyd1': device_add
[   13.952053] PM: Adding info for No Bus:ttyd1
[   13.956052] device: 'ttyd2': device_add
[   13.960052] PM: Adding info for No Bus:ttyd2
[   13.964052] device: 'ttyd3': device_add
[   13.968053] PM: Adding info for No Bus:ttyd3
[   13.972052] device: 'ttyd4': device_add
[   13.976053] PM: Adding info for No Bus:ttyd4
[   13.980052] device: 'ttyd5': device_add
[   13.984053] PM: Adding info for No Bus:ttyd5
[   13.988052] device: 'ttyd6': device_add
[   13.992064] PM: Adding info for No Bus:ttyd6
[   14.000034] device: 'ttyd7': device_add
[   14.003918] PM: Adding info for No Bus:ttyd7
[   14.004053] device: 'ttyd8': device_add
[   14.008055] PM: Adding info for No Bus:ttyd8
[   14.012053] device: 'ttyd9': device_add
[   14.016054] PM: Adding info for No Bus:ttyd9
[   14.020060] device: 'ttyda': device_add
[   14.024057] PM: Adding info for No Bus:ttyda
[   14.028053] device: 'ttydb': device_add
[   14.032054] PM: Adding info for No Bus:ttydb
[   14.036053] device: 'ttydc': device_add
[   14.040066] PM: Adding info for No Bus:ttydc
[   14.044054] device: 'ttydd': device_add
[   14.048055] PM: Adding info for No Bus:ttydd
[   14.052052] device: 'ttyde': device_add
[   14.056054] PM: Adding info for No Bus:ttyde
[   14.060052] device: 'ttydf': device_add
[   14.064055] PM: Adding info for No Bus:ttydf
[   14.068053] device: 'ttye0': device_add
[   14.072055] PM: Adding info for No Bus:ttye0
[   14.076053] device: 'ttye1': device_add
[   14.080055] PM: Adding info for No Bus:ttye1
[   14.084052] device: 'ttye2': device_add
[   14.088080] PM: Adding info for No Bus:ttye2
[   14.092053] device: 'ttye3': device_add
[   14.096056] PM: Adding info for No Bus:ttye3
[   14.100052] device: 'ttye4': device_add
[   14.104055] PM: Adding info for No Bus:ttye4
[   14.108052] device: 'ttye5': device_add
[   14.112056] PM: Adding info for No Bus:ttye5
[   14.116052] device: 'ttye6': device_add
[   14.120056] PM: Adding info for No Bus:ttye6
[   14.124061] device: 'ttye7': device_add
[   14.128059] PM: Adding info for No Bus:ttye7
[   14.132053] device: 'ttye8': device_add
[   14.136068] PM: Adding info for No Bus:ttye8
[   14.140054] device: 'ttye9': device_add
[   14.144069] PM: Adding info for No Bus:ttye9
[   14.148053] device: 'ttyea': device_add
[   14.152059] PM: Adding info for No Bus:ttyea
[   14.156061] device: 'ttyeb': device_add
[   14.160060] PM: Adding info for No Bus:ttyeb
[   14.164054] device: 'ttyec': device_add
[   14.168059] PM: Adding info for No Bus:ttyec
[   14.172052] device: 'ttyed': device_add
[   14.176059] PM: Adding info for No Bus:ttyed
[   14.180052] device: 'ttyee': device_add
[   14.184070] PM: Adding info for No Bus:ttyee
[   14.188054] device: 'ttyef': device_add
[   14.192061] PM: Adding info for No Bus:ttyef
[   14.196074] device: 'ptmx': device_add
[   14.200060] PM: Adding info for No Bus:ptmx
[   14.204057] initcall pty_init+0x0/0x40e returned 0 after 3968750 usecs
[   14.208004] calling  sysrq_init+0x0/0x6d @ 1
[   14.212020] initcall sysrq_init+0x0/0x6d returned 0 after 0 usecs
[   14.216003] calling  rp_init+0x0/0xf40 @ 1
[   14.220002] RocketPort device driver module, version 2.09, 12-June-2003
[   14.224025] No rocketport ports found; unloading driver
[   14.228018] initcall rp_init+0x0/0xf40 returned -6 after 7812 usecs
[   14.232004] initcall rp_init+0x0/0xf40 returned with error code -6 
[   14.236003] calling  cy_init+0x0/0x453 @ 1
[   14.240003] Cyclades driver 2.6 (built Jun 11 2010 12:25:28)
[   14.257665] bus: 'pci': add driver cyclades
[   14.260069] initcall cy_init+0x0/0x453 returned 0 after 19531 usecs
[   14.264004] calling  epca_module_init+0x0/0x39e @ 1
[   14.268004] DIGI epca driver version 1.3.0.1-LK2.6 loaded.
[   14.272003] bus: 'pci': add driver epca
[   14.276076] device: 'ttyD0': device_add
[   14.280076] PM: Adding info for No Bus:ttyD0
[   14.284053] device: 'ttyD1': device_add
[   14.288069] PM: Adding info for No Bus:ttyD1
[   14.292054] device: 'ttyD2': device_add
[   14.296064] PM: Adding info for No Bus:ttyD2
[   14.300070] device: 'ttyD3': device_add
[   14.304065] PM: Adding info for No Bus:ttyD3
[   14.308054] device: 'ttyD4': device_add
[   14.312060] PM: Adding info for No Bus:ttyD4
[   14.316053] device: 'ttyD5': device_add
[   14.320061] PM: Adding info for No Bus:ttyD5
[   14.324053] device: 'ttyD6': device_add
[   14.328059] PM: Adding info for No Bus:ttyD6
[   14.336033] device: 'ttyD7': device_add
[   14.339931] PM: Adding info for No Bus:ttyD7
[   14.340053] device: 'ttyD8': device_add
[   14.344064] PM: Adding info for No Bus:ttyD8
[   14.348053] device: 'ttyD9': device_add
[   14.352059] PM: Adding info for No Bus:ttyD9
[   14.356053] device: 'ttyD10': device_add
[   14.360060] PM: Adding info for No Bus:ttyD10
[   14.364053] device: 'ttyD11': device_add
[   14.368060] PM: Adding info for No Bus:ttyD11
[   14.372052] device: 'ttyD12': device_add
[   14.376060] PM: Adding info for No Bus:ttyD12
[   14.380052] device: 'ttyD13': device_add
[   14.384070] PM: Adding info for No Bus:ttyD13
[   14.388053] device: 'ttyD14': device_add
[   14.392062] PM: Adding info for No Bus:ttyD14
[   14.396061] device: 'ttyD15': device_add
[   14.400064] PM: Adding info for No Bus:ttyD15
[   14.404061] device: 'ttyD16': device_add
[   14.408065] PM: Adding info for No Bus:ttyD16
[   14.412053] device: 'ttyD17': device_add
[   14.416061] PM: Adding info for No Bus:ttyD17
[   14.420052] device: 'ttyD18': device_add
[   14.424063] PM: Adding info for No Bus:ttyD18
[   14.428052] device: 'ttyD19': device_add
[   14.432070] PM: Adding info for No Bus:ttyD19
[   14.436053] device: 'ttyD20': device_add
[   14.440063] PM: Adding info for No Bus:ttyD20
[   14.444052] device: 'ttyD21': device_add
[   14.448076] PM: Adding info for No Bus:ttyD21
[   14.452053] device: 'ttyD22': device_add
[   14.456061] PM: Adding info for No Bus:ttyD22
[   14.460053] device: 'ttyD23': device_add
[   14.464061] PM: Adding info for No Bus:ttyD23
[   14.468052] device: 'ttyD24': device_add
[   14.472061] PM: Adding info for No Bus:ttyD24
[   14.476053] device: 'ttyD25': device_add
[   14.480070] PM: Adding info for No Bus:ttyD25
[   14.484054] device: 'ttyD26': device_add
[   14.488065] PM: Adding info for No Bus:ttyD26
[   14.492053] device: 'ttyD27': device_add
[   14.496061] PM: Adding info for No Bus:ttyD27
[   14.500052] device: 'ttyD28': device_add
[   14.504062] PM: Adding info for No Bus:ttyD28
[   14.508061] device: 'ttyD29': device_add
[   14.512066] PM: Adding info for No Bus:ttyD29
[   14.516054] device: 'ttyD30': device_add
[   14.520062] PM: Adding info for No Bus:ttyD30
[   14.524052] device: 'ttyD31': device_add
[   14.528071] PM: Adding info for No Bus:ttyD31
[   14.532054] device: 'ttyD32': device_add
[   14.536067] PM: Adding info for No Bus:ttyD32
[   14.540053] device: 'ttyD33': device_add
[   14.544062] PM: Adding info for No Bus:ttyD33
[   14.548053] device: 'ttyD34': device_add
[   14.552063] PM: Adding info for No Bus:ttyD34
[   14.556052] device: 'ttyD35': device_add
[   14.560063] PM: Adding info for No Bus:ttyD35
[   14.564053] device: 'ttyD36': device_add
[   14.568063] PM: Adding info for No Bus:ttyD36
[   14.572053] device: 'ttyD37': device_add
[   14.576075] PM: Adding info for No Bus:ttyD37
[   14.580054] device: 'ttyD38': device_add
[   14.584066] PM: Adding info for No Bus:ttyD38
[   14.588053] device: 'ttyD39': device_add
[   14.592076] PM: Adding info for No Bus:ttyD39
[   14.596054] device: 'ttyD40': device_add
[   14.600064] PM: Adding info for No Bus:ttyD40
[   14.604052] device: 'ttyD41': device_add
[   14.608089] PM: Adding info for No Bus:ttyD41
[   14.612061] device: 'ttyD42': device_add
[   14.616077] PM: Adding info for No Bus:ttyD42
[   14.620061] device: 'ttyD43': device_add
[   14.624076] PM: Adding info for No Bus:ttyD43
[   14.628054] device: 'ttyD44': device_add
[   14.632067] PM: Adding info for No Bus:ttyD44
[   14.636052] device: 'ttyD45': device_add
[   14.640064] PM: Adding info for No Bus:ttyD45
[   14.644053] device: 'ttyD46': device_add
[   14.648064] PM: Adding info for No Bus:ttyD46
[   14.652052] device: 'ttyD47': device_add
[   14.656064] PM: Adding info for No Bus:ttyD47
[   14.660053] device: 'ttyD48': device_add
[   14.664064] PM: Adding info for No Bus:ttyD48
[   14.668052] device: 'ttyD49': device_add
[   14.672073] PM: Adding info for No Bus:ttyD49
[   14.676054] device: 'ttyD50': device_add
[   14.680069] PM: Adding info for No Bus:ttyD50
[   14.684053] device: 'ttyD51': device_add
[   14.688064] PM: Adding info for No Bus:ttyD51
[   14.692053] device: 'ttyD52': device_add
[   14.696063] PM: Adding info for No Bus:ttyD52
[   14.700052] device: 'ttyD53': device_add
[   14.704063] PM: Adding info for No Bus:ttyD53
[   14.708052] device: 'ttyD54': device_add
[   14.712074] PM: Adding info for No Bus:ttyD54
[   14.716061] device: 'ttyD55': device_add
[   14.720079] PM: Adding info for No Bus:ttyD55
[   14.724054] device: 'ttyD56': device_add
[   14.728068] PM: Adding info for No Bus:ttyD56
[   14.732052] device: 'ttyD57': device_add
[   14.736075] PM: Adding info for No Bus:ttyD57
[   14.740054] device: 'ttyD58': device_add
[   14.744068] PM: Adding info for No Bus:ttyD58
[   14.748053] device: 'ttyD59': device_add
[   14.752064] PM: Adding info for No Bus:ttyD59
[   14.756052] device: 'ttyD60': device_add
[   14.760064] PM: Adding info for No Bus:ttyD60
[   14.764053] device: 'ttyD61': device_add
[   14.768074] PM: Adding info for No Bus:ttyD61
[   14.772054] device: 'ttyD62': device_add
[   14.776069] PM: Adding info for No Bus:ttyD62
[   14.780052] device: 'ttyD63': device_add
[   14.784065] PM: Adding info for No Bus:ttyD63
[   14.788052] device: 'ttyD64': device_add
[   14.792066] PM: Adding info for No Bus:ttyD64
[   14.796053] device: 'ttyD65': device_add
[   14.800066] PM: Adding info for No Bus:ttyD65
[   14.804053] device: 'ttyD66': device_add
[   14.808065] PM: Adding info for No Bus:ttyD66
[   14.812053] device: 'ttyD67': device_add
[   14.816092] PM: Adding info for No Bus:ttyD67
[   14.820062] device: 'ttyD68': device_add
[   14.824073] PM: Adding info for No Bus:ttyD68
[   14.828053] device: 'ttyD69': device_add
[   14.832066] PM: Adding info for No Bus:ttyD69
[   14.836052] device: 'ttyD70': device_add
[   14.840065] PM: Adding info for No Bus:ttyD70
[   14.844061] device: 'ttyD71': device_add
[   14.848070] PM: Adding info for No Bus:ttyD71
[   14.852053] device: 'ttyD72': device_add
[   14.856066] PM: Adding info for No Bus:ttyD72
[   14.860053] device: 'ttyD73': device_add
[   14.864076] PM: Adding info for No Bus:ttyD73
[   14.868054] device: 'ttyD74': device_add
[   14.872069] PM: Adding info for No Bus:ttyD74
[   14.876052] device: 'ttyD75': device_add
[   14.880066] PM: Adding info for No Bus:ttyD75
[   14.884063] device: 'ttyD76': device_add
[   14.888071] PM: Adding info for No Bus:ttyD76
[   14.892053] device: 'ttyD77': device_add
[   14.896066] PM: Adding info for No Bus:ttyD77
[   14.900052] device: 'ttyD78': device_add
[   14.904066] PM: Adding info for No Bus:ttyD78
[   14.908052] device: 'ttyD79': device_add
[   14.912077] PM: Adding info for No Bus:ttyD79
[   14.916053] device: 'ttyD80': device_add
[   14.920070] PM: Adding info for No Bus:ttyD80
[   14.924060] device: 'ttyD81': device_add
[   14.928072] PM: Adding info for No Bus:ttyD81
[   14.932053] device: 'ttyD82': device_add
[   14.936070] PM: Adding info for No Bus:ttyD82
[   14.940053] device: 'ttyD83': device_add
[   14.944067] PM: Adding info for No Bus:ttyD83
[   14.948052] device: 'ttyD84': device_add
[   14.952067] PM: Adding info for No Bus:ttyD84
[   14.956053] device: 'ttyD85': device_add
[   14.960077] PM: Adding info for No Bus:ttyD85
[   14.964054] device: 'ttyD86': device_add
[   14.968071] PM: Adding info for No Bus:ttyD86
[   14.972052] device: 'ttyD87': device_add
[   14.976069] PM: Adding info for No Bus:ttyD87
[   14.980053] device: 'ttyD88': device_add
[   14.984068] PM: Adding info for No Bus:ttyD88
[   14.988053] device: 'ttyD89': device_add
[   14.992068] PM: Adding info for No Bus:ttyD89
[   14.996053] device: 'ttyD90': device_add
[   15.000070] PM: Adding info for No Bus:ttyD90
[   15.004053] device: 'ttyD91': device_add
[   15.008080] PM: Adding info for No Bus:ttyD91
[   15.012054] device: 'ttyD92': device_add
[   15.016073] PM: Adding info for No Bus:ttyD92
[   15.020053] device: 'ttyD93': device_add
[   15.024071] PM: Adding info for No Bus:ttyD93
[   15.028061] device: 'ttyD94': device_add
[   15.032086] PM: Adding info for No Bus:ttyD94
[   15.036054] device: 'ttyD95': device_add
[   15.040071] PM: Adding info for No Bus:ttyD95
[   15.044053] device: 'ttyD96': device_add
[   15.048070] PM: Adding info for No Bus:ttyD96
[   15.052052] device: 'ttyD97': device_add
[   15.056080] PM: Adding info for No Bus:ttyD97
[   15.060054] device: 'ttyD98': device_add
[   15.064068] PM: Adding info for No Bus:ttyD98
[   15.068061] device: 'ttyD99': device_add
[   15.072076] PM: Adding info for No Bus:ttyD99
[   15.076053] device: 'ttyD100': device_add
[   15.080071] PM: Adding info for No Bus:ttyD100
[   15.084053] device: 'ttyD101': device_add
[   15.088071] PM: Adding info for No Bus:ttyD101
[   15.092053] device: 'ttyD102': device_add
[   15.096071] PM: Adding info for No Bus:ttyD102
[   15.100053] device: 'ttyD103': device_add
[   15.104081] PM: Adding info for No Bus:ttyD103
[   15.108054] device: 'ttyD104': device_add
[   15.112074] PM: Adding info for No Bus:ttyD104
[   15.116053] device: 'ttyD105': device_add
[   15.120071] PM: Adding info for No Bus:ttyD105
[   15.124053] device: 'ttyD106': device_add
[   15.128071] PM: Adding info for No Bus:ttyD106
[   15.132061] device: 'ttyD107': device_add
[   15.136077] PM: Adding info for No Bus:ttyD107
[   15.140054] device: 'ttyD108': device_add
[   15.144072] PM: Adding info for No Bus:ttyD108
[   15.148053] device: 'ttyD109': device_add
[   15.152082] PM: Adding info for No Bus:ttyD109
[   15.156054] device: 'ttyD110': device_add
[   15.160076] PM: Adding info for No Bus:ttyD110
[   15.164053] device: 'ttyD111': device_add
[   15.168073] PM: Adding info for No Bus:ttyD111
[   15.172053] device: 'ttyD112': device_add
[   15.176088] PM: Adding info for No Bus:ttyD112
[   15.180054] device: 'ttyD113': device_add
[   15.184074] PM: Adding info for No Bus:ttyD113
[   15.188053] device: 'ttyD114': device_add
[   15.192076] PM: Adding info for No Bus:ttyD114
[   15.196052] device: 'ttyD115': device_add
[   15.200084] PM: Adding info for No Bus:ttyD115
[   15.204055] device: 'ttyD116': device_add
[   15.208078] PM: Adding info for No Bus:ttyD116
[   15.212053] device: 'ttyD117': device_add
[   15.216075] PM: Adding info for No Bus:ttyD117
[   15.220053] device: 'ttyD118': device_add
[   15.224086] PM: Adding info for No Bus:ttyD118
[   15.228054] device: 'ttyD119': device_add
[   15.236067] PM: Adding info for No Bus:ttyD119
[   15.240061] device: 'ttyD120': device_add
[   15.244079] PM: Adding info for No Bus:ttyD120
[   15.248053] device: 'ttyD121': device_add
[   15.252088] PM: Adding info for No Bus:ttyD121
[   15.256055] device: 'ttyD122': device_add
[   15.260081] PM: Adding info for No Bus:ttyD122
[   15.264053] device: 'ttyD123': device_add
[   15.268075] PM: Adding info for No Bus:ttyD123
[   15.272053] device: 'ttyD124': device_add
[   15.276076] PM: Adding info for No Bus:ttyD124
[   15.280053] device: 'ttyD125': device_add
[   15.284075] PM: Adding info for No Bus:ttyD125
[   15.288053] device: 'ttyD126': device_add
[   15.292075] PM: Adding info for No Bus:ttyD126
[   15.296062] device: 'ttyD127': device_add
[   15.300089] PM: Adding info for No Bus:ttyD127
[   15.304055] device: 'ttyD128': device_add
[   15.308080] PM: Adding info for No Bus:ttyD128
[   15.312053] device: 'ttyD129': device_add
[   15.316076] PM: Adding info for No Bus:ttyD129
[   15.320053] device: 'ttyD130': device_add
[   15.324088] PM: Adding info for No Bus:ttyD130
[   15.328054] device: 'ttyD131': device_add
[   15.332080] PM: Adding info for No Bus:ttyD131
[   15.336053] device: 'ttyD132': device_add
[   15.340077] PM: Adding info for No Bus:ttyD132
[   15.344061] device: 'ttyD133': device_add
[   15.348091] PM: Adding info for No Bus:ttyD133
[   15.352054] device: 'ttyD134': device_add
[   15.356083] PM: Adding info for No Bus:ttyD134
[   15.360053] device: 'ttyD135': device_add
[   15.364078] PM: Adding info for No Bus:ttyD135
[   15.368053] device: 'ttyD136': device_add
[   15.372078] PM: Adding info for No Bus:ttyD136
[   15.376053] device: 'ttyD137': device_add
[   15.380078] PM: Adding info for No Bus:ttyD137
[   15.384053] device: 'ttyD138': device_add
[   15.388079] PM: Adding info for No Bus:ttyD138
[   15.392053] device: 'ttyD139': device_add
[   15.396088] PM: Adding info for No Bus:ttyD139
[   15.400055] device: 'ttyD140': device_add
[   15.404082] PM: Adding info for No Bus:ttyD140
[   15.408053] device: 'ttyD141': device_add
[   15.412078] PM: Adding info for No Bus:ttyD141
[   15.416053] device: 'ttyD142': device_add
[   15.420078] PM: Adding info for No Bus:ttyD142
[   15.424053] device: 'ttyD143': device_add
[   15.428079] PM: Adding info for No Bus:ttyD143
[   15.432053] device: 'ttyD144': device_add
[   15.436079] PM: Adding info for No Bus:ttyD144
[   15.440053] device: 'ttyD145': device_add
[   15.444089] PM: Adding info for No Bus:ttyD145
[   15.448063] device: 'ttyD146': device_add
[   15.452087] PM: Adding info for No Bus:ttyD146
[   15.456054] device: 'ttyD147': device_add
[   15.460080] PM: Adding info for No Bus:ttyD147
[   15.464053] device: 'ttyD148': device_add
[   15.468080] PM: Adding info for No Bus:ttyD148
[   15.472064] device: 'ttyD149': device_add
[   15.476084] PM: Adding info for No Bus:ttyD149
[   15.480055] device: 'ttyD150': device_add
[   15.484081] PM: Adding info for No Bus:ttyD150
[   15.488053] device: 'ttyD151': device_add
[   15.492090] PM: Adding info for No Bus:ttyD151
[   15.496055] device: 'ttyD152': device_add
[   15.500085] PM: Adding info for No Bus:ttyD152
[   15.508020] device: 'ttyD153': device_add
[   15.512081] PM: Adding info for No Bus:ttyD153
[   15.516053] device: 'ttyD154': device_add
[   15.520082] PM: Adding info for No Bus:ttyD154
[   15.524063] device: 'ttyD155': device_add
[   15.528087] PM: Adding info for No Bus:ttyD155
[   15.532055] device: 'ttyD156': device_add
[   15.536082] PM: Adding info for No Bus:ttyD156
[   15.540054] device: 'ttyD157': device_add
[   15.544093] PM: Adding info for No Bus:ttyD157
[   15.548056] device: 'ttyD158': device_add
[   15.552085] PM: Adding info for No Bus:ttyD158
[   15.556062] device: 'ttyD159': device_add
[   15.560088] PM: Adding info for No Bus:ttyD159
[   15.564055] device: 'ttyD160': device_add
[   15.568083] PM: Adding info for No Bus:ttyD160
[   15.572053] device: 'ttyD161': device_add
[   15.576082] PM: Adding info for No Bus:ttyD161
[   15.580053] device: 'ttyD162': device_add
[   15.584083] PM: Adding info for No Bus:ttyD162
[   15.588053] device: 'ttyD163': device_add
[   15.592091] PM: Adding info for No Bus:ttyD163
[   15.596055] device: 'ttyD164': device_add
[   15.600087] PM: Adding info for No Bus:ttyD164
[   15.604054] device: 'ttyD165': device_add
[   15.608082] PM: Adding info for No Bus:ttyD165
[   15.612053] device: 'ttyD166': device_add
[   15.616083] PM: Adding info for No Bus:ttyD166
[   15.620054] device: 'ttyD167': device_add
[   15.624097] PM: Adding info for No Bus:ttyD167
[   15.628055] device: 'ttyD168': device_add
[   15.632084] PM: Adding info for No Bus:ttyD168
[   15.636053] device: 'ttyD169': device_add
[   15.640094] PM: Adding info for No Bus:ttyD169
[   15.644055] device: 'ttyD170': device_add
[   15.648088] PM: Adding info for No Bus:ttyD170
[   15.652054] device: 'ttyD171': device_add
[   15.656083] PM: Adding info for No Bus:ttyD171
[   15.660063] device: 'ttyD172': device_add
[   15.664088] PM: Adding info for No Bus:ttyD172
[   15.668056] device: 'ttyD173': device_add
[   15.672086] PM: Adding info for No Bus:ttyD173
[   15.676054] device: 'ttyD174': device_add
[   15.680084] PM: Adding info for No Bus:ttyD174
[   15.684054] device: 'ttyD175': device_add
[   15.688095] PM: Adding info for No Bus:ttyD175
[   15.692055] device: 'ttyD176': device_add
[   15.696089] PM: Adding info for No Bus:ttyD176
[   15.700054] device: 'ttyD177': device_add
[   15.704086] PM: Adding info for No Bus:ttyD177
[   15.708053] device: 'ttyD178': device_add
[   15.712084] PM: Adding info for No Bus:ttyD178
[   15.716054] device: 'ttyD179': device_add
[   15.720084] PM: Adding info for No Bus:ttyD179
[   15.728034] device: 'ttyD180': device_add
[   15.732084] PM: Adding info for No Bus:ttyD180
[   15.736054] device: 'ttyD181': device_add
[   15.740096] PM: Adding info for No Bus:ttyD181
[   15.744055] device: 'ttyD182': device_add
[   15.748121] PM: Adding info for No Bus:ttyD182
[   15.752063] device: 'ttyD183': device_add
[   15.756101] PM: Adding info for No Bus:ttyD183
[   15.760054] device: 'ttyD184': device_add
[   15.764094] PM: Adding info for No Bus:ttyD184
[   15.768062] device: 'ttyD185': device_add
[   15.772105] PM: Adding info for No Bus:ttyD185
[   15.776055] device: 'ttyD186': device_add
[   15.780090] PM: Adding info for No Bus:ttyD186
[   15.784054] device: 'ttyD187': device_add
[   15.788098] PM: Adding info for No Bus:ttyD187
[   15.792055] device: 'ttyD188': device_add
[   15.796092] PM: Adding info for No Bus:ttyD188
[   15.800054] device: 'ttyD189': device_add
[   15.804087] PM: Adding info for No Bus:ttyD189
[   15.808053] device: 'ttyD190': device_add
[   15.812088] PM: Adding info for No Bus:ttyD190
[   15.816064] device: 'ttyD191': device_add
[   15.820094] PM: Adding info for No Bus:ttyD191
[   15.824054] device: 'ttyD192': device_add
[   15.828089] PM: Adding info for No Bus:ttyD192
[   15.832054] device: 'ttyD193': device_add
[   15.840024] PM: Adding info for No Bus:ttyD193
[   15.844055] device: 'ttyD194': device_add
[   15.848094] PM: Adding info for No Bus:ttyD194
[   15.852054] device: 'ttyD195': device_add
[   15.856089] PM: Adding info for No Bus:ttyD195
[   15.860054] device: 'ttyD196': device_add
[   15.864089] PM: Adding info for No Bus:ttyD196
[   15.868054] device: 'ttyD197': device_add
[   15.872090] PM: Adding info for No Bus:ttyD197
[   15.876062] device: 'ttyD198': device_add
[   15.880094] PM: Adding info for No Bus:ttyD198
[   15.884055] device: 'ttyD199': device_add
[   15.888101] PM: Adding info for No Bus:ttyD199
[   15.892055] device: 'ttyD200': device_add
[   15.896093] PM: Adding info for No Bus:ttyD200
[   15.900054] device: 'ttyD201': device_add
[   15.904089] PM: Adding info for No Bus:ttyD201
[   15.908054] device: 'ttyD202': device_add
[   15.912090] PM: Adding info for No Bus:ttyD202
[   15.916053] device: 'ttyD203': device_add
[   15.920101] PM: Adding info for No Bus:ttyD203
[   15.924055] device: 'ttyD204': device_add
[   15.928094] PM: Adding info for No Bus:ttyD204
[   15.932054] device: 'ttyD205': device_add
[   15.936101] PM: Adding info for No Bus:ttyD205
[   15.940055] device: 'ttyD206': device_add
[   15.944093] PM: Adding info for No Bus:ttyD206
[   15.948054] device: 'ttyD207': device_add
[   15.952089] PM: Adding info for No Bus:ttyD207
[   15.956054] device: 'ttyD208': device_add
[   15.960093] PM: Adding info for No Bus:ttyD208
[   15.964054] device: 'ttyD209': device_add
[   15.968090] PM: Adding info for No Bus:ttyD209
[   15.972054] device: 'ttyD210': device_add
[   15.976090] PM: Adding info for No Bus:ttyD210
[   15.980073] device: 'ttyD211': device_add
[   15.984107] PM: Adding info for No Bus:ttyD211
[   15.988056] device: 'ttyD212': device_add
[   15.992095] PM: Adding info for No Bus:ttyD212
[   15.996054] device: 'ttyD213': device_add
[   16.004033] PM: Adding info for No Bus:ttyD213
[   16.008054] device: 'ttyD214': device_add
[   16.012091] PM: Adding info for No Bus:ttyD214
[   16.016054] device: 'ttyD215': device_add
[   16.020091] PM: Adding info for No Bus:ttyD215
[   16.024054] device: 'ttyD216': device_add
[   16.028091] PM: Adding info for No Bus:ttyD216
[   16.032054] device: 'ttyD217': device_add
[   16.036100] PM: Adding info for No Bus:ttyD217
[   16.040055] device: 'ttyD218': device_add
[   16.044096] PM: Adding info for No Bus:ttyD218
[   16.048054] device: 'ttyD219': device_add
[   16.052091] PM: Adding info for No Bus:ttyD219
[   16.056054] device: 'ttyD220': device_add
[   16.060091] PM: Adding info for No Bus:ttyD220
[   16.064054] device: 'ttyD221': device_add
[   16.068092] PM: Adding info for No Bus:ttyD221
[   16.072065] device: 'ttyD222': device_add
[   16.076099] PM: Adding info for No Bus:ttyD222
[   16.080055] device: 'ttyD223': device_add
[   16.084102] PM: Adding info for No Bus:ttyD223
[   16.088063] device: 'ttyD224': device_add
[   16.092098] PM: Adding info for No Bus:ttyD224
[   16.096055] device: 'ttyD225': device_add
[   16.100093] PM: Adding info for No Bus:ttyD225
[   16.104054] device: 'ttyD226': device_add
[   16.108093] PM: Adding info for No Bus:ttyD226
[   16.112054] device: 'ttyD227': device_add
[   16.116093] PM: Adding info for No Bus:ttyD227
[   16.120053] device: 'ttyD228': device_add
[   16.124093] PM: Adding info for No Bus:ttyD228
[   16.128054] device: 'ttyD229': device_add
[   16.132103] PM: Adding info for No Bus:ttyD229
[   16.136055] device: 'ttyD230': device_add
[   16.140099] PM: Adding info for No Bus:ttyD230
[   16.144054] device: 'ttyD231': device_add
[   16.148093] PM: Adding info for No Bus:ttyD231
[   16.152054] device: 'ttyD232': device_add
[   16.156095] PM: Adding info for No Bus:ttyD232
[   16.160054] device: 'ttyD233': device_add
[   16.168068] PM: Adding info for No Bus:ttyD233
[   16.172054] device: 'ttyD234': device_add
[   16.176094] PM: Adding info for No Bus:ttyD234
[   16.180055] device: 'ttyD235': device_add
[   16.184106] PM: Adding info for No Bus:ttyD235
[   16.188056] device: 'ttyD236': device_add
[   16.192100] PM: Adding info for No Bus:ttyD236
[   16.196063] device: 'ttyD237': device_add
[   16.200101] PM: Adding info for No Bus:ttyD237
[   16.204055] device: 'ttyD238': device_add
[   16.208096] PM: Adding info for No Bus:ttyD238
[   16.212063] device: 'ttyD239': device_add
[   16.216105] PM: Adding info for No Bus:ttyD239
[   16.220055] device: 'ttyD240': device_add
[   16.224112] PM: Adding info for No Bus:ttyD240
[   16.228055] device: 'ttyD241': device_add
[   16.232106] PM: Adding info for No Bus:ttyD241
[   16.236055] device: 'ttyD242': device_add
[   16.240101] PM: Adding info for No Bus:ttyD242
[   16.244054] device: 'ttyD243': device_add
[   16.248097] PM: Adding info for No Bus:ttyD243
[   16.252054] device: 'ttyD244': device_add
[   16.256097] PM: Adding info for No Bus:ttyD244
[   16.260055] device: 'ttyD245': device_add
[   16.264096] PM: Adding info for No Bus:ttyD245
[   16.268054] device: 'ttyD246': device_add
[   16.276006] PM: Adding info for No Bus:ttyD246
[   16.280055] device: 'ttyD247': device_add
[   16.284114] PM: Adding info for No Bus:ttyD247
[   16.288055] device: 'ttyD248': device_add
[   16.292102] PM: Adding info for No Bus:ttyD248
[   16.296054] device: 'ttyD249': device_add
[   16.300098] PM: Adding info for No Bus:ttyD249
[   16.304063] device: 'ttyD250': device_add
[   16.308104] PM: Adding info for No Bus:ttyD250
[   16.312055] device: 'ttyD251': device_add
[   16.316099] PM: Adding info for No Bus:ttyD251
[   16.320054] device: 'ttyD252': device_add
[   16.324099] PM: Adding info for No Bus:ttyD252
[   16.328054] device: 'ttyD253': device_add
[   16.332110] PM: Adding info for No Bus:ttyD253
[   16.336056] device: 'ttyD254': device_add
[   16.340104] PM: Adding info for No Bus:ttyD254
[   16.344054] device: 'ttyD255': device_add
[   16.348100] PM: Adding info for No Bus:ttyD255
[   16.352068] device: 'digi_ctl0': device_add
[   16.356085] PM: Adding info for No Bus:digi_ctl0
[   16.360055] device: 'digi_ctl1': device_add
[   16.364085] PM: Adding info for No Bus:digi_ctl1
[   16.368054] device: 'digi_ctl2': device_add
[   16.372085] PM: Adding info for No Bus:digi_ctl2
[   16.376054] device: 'digi_ctl3': device_add
[   16.380096] PM: Adding info for No Bus:digi_ctl3
[   16.384056] device: 'digi_ctl4': device_add
[   16.388090] PM: Adding info for No Bus:digi_ctl4
[   16.392054] device: 'digi_ctl5': device_add
[   16.396101] PM: Adding info for No Bus:digi_ctl5
[   16.400056] device: 'digi_ctl6': device_add
[   16.404088] PM: Adding info for No Bus:digi_ctl6
[   16.408063] device: 'digi_ctl7': device_add
[   16.412091] PM: Adding info for No Bus:digi_ctl7
[   16.416055] device: 'digi_ctl8': device_add
[   16.420086] PM: Adding info for No Bus:digi_ctl8
[   16.424054] device: 'digi_ctl9': device_add
[   16.428095] PM: Adding info for No Bus:digi_ctl9
[   16.432063] device: 'digi_ctl10': device_add
[   16.436094] PM: Adding info for No Bus:digi_ctl10
[   16.440056] device: 'digi_ctl11': device_add
[   16.444086] PM: Adding info for No Bus:digi_ctl11
[   16.448054] device: 'digi_ctl12': device_add
[   16.452086] PM: Adding info for No Bus:digi_ctl12
[   16.456054] device: 'digi_ctl13': device_add
[   16.460087] PM: Adding info for No Bus:digi_ctl13
[   16.464054] device: 'digi_ctl14': device_add
[   16.468087] PM: Adding info for No Bus:digi_ctl14
[   16.472055] device: 'digi_ctl15': device_add
[   16.476099] PM: Adding info for No Bus:digi_ctl15
[   16.480055] device: 'digi_ctl16': device_add
[   16.484091] PM: Adding info for No Bus:digi_ctl16
[   16.488054] device: 'digi_ctl17': device_add
[   16.492089] PM: Adding info for No Bus:digi_ctl17
[   16.496066] device: 'digi_ctl18': device_add
[   16.500094] PM: Adding info for No Bus:digi_ctl18
[   16.504055] device: 'digi_ctl19': device_add
[   16.508090] PM: Adding info for No Bus:digi_ctl19
[   16.512063] device: 'digi_ctl20': device_add
[   16.516094] PM: Adding info for No Bus:digi_ctl20
[   16.520055] device: 'digi_ctl21': device_add
[   16.524100] PM: Adding info for No Bus:digi_ctl21
[   16.528056] device: 'digi_ctl22': device_add
[   16.532096] PM: Adding info for No Bus:digi_ctl22
[   16.536054] device: 'digi_ctl23': device_add
[   16.540091] PM: Adding info for No Bus:digi_ctl23
[   16.544054] device: 'digi_ctl24': device_add
[   16.548091] PM: Adding info for No Bus:digi_ctl24
[   16.552054] device: 'digi_ctl25': device_add
[   16.556091] PM: Adding info for No Bus:digi_ctl25
[   16.560055] device: 'digi_ctl26': device_add
[   16.564091] PM: Adding info for No Bus:digi_ctl26
[   16.568054] device: 'digi_ctl27': device_add
[   16.572102] PM: Adding info for No Bus:digi_ctl27
[   16.576056] device: 'digi_ctl28': device_add
[   16.580097] PM: Adding info for No Bus:digi_ctl28
[   16.584055] device: 'digi_ctl29': device_add
[   16.588092] PM: Adding info for No Bus:digi_ctl29
[   16.592055] device: 'digi_ctl30': device_add
[   16.596093] PM: Adding info for No Bus:digi_ctl30
[   16.600054] device: 'digi_ctl31': device_add
[   16.604094] PM: Adding info for No Bus:digi_ctl31
[   16.608055] device: 'digi_ctl32': device_add
[   16.612093] PM: Adding info for No Bus:digi_ctl32
[   16.616063] device: 'digi_ctl33': device_add
[   16.620109] PM: Adding info for No Bus:digi_ctl33
[   16.624056] device: 'digi_ctl34': device_add
[   16.628099] PM: Adding info for No Bus:digi_ctl34
[   16.632055] device: 'digi_ctl35': device_add
[   16.636094] PM: Adding info for No Bus:digi_ctl35
[   16.640054] device: 'digi_ctl36': device_add
[   16.644094] PM: Adding info for No Bus:digi_ctl36
[   16.648054] device: 'digi_ctl37': device_add
[   16.652094] PM: Adding info for No Bus:digi_ctl37
[   16.656063] device: 'digi_ctl38': device_add
[   16.660100] PM: Adding info for No Bus:digi_ctl38
[   16.664056] device: 'digi_ctl39': device_add
[   16.668120] PM: Adding info for No Bus:digi_ctl39
[   16.672056] device: 'digi_ctl40': device_add
[   16.676100] PM: Adding info for No Bus:digi_ctl40
[   16.680054] device: 'digi_ctl41': device_add
[   16.684110] PM: Adding info for No Bus:digi_ctl41
[   16.688055] device: 'digi_ctl42': device_add
[   16.692101] PM: Adding info for No Bus:digi_ctl42
[   16.696054] device: 'digi_ctl43': device_add
[   16.700095] PM: Adding info for No Bus:digi_ctl43
[   16.704054] device: 'digi_ctl44': device_add
[   16.708095] PM: Adding info for No Bus:digi_ctl44
[   16.712054] device: 'digi_ctl45': device_add
[   16.716105] PM: Adding info for No Bus:digi_ctl45
[   16.720063] device: 'digi_ctl46': device_add
[   16.724104] PM: Adding info for No Bus:digi_ctl46
[   16.728056] device: 'digi_ctl47': device_add
[   16.732097] PM: Adding info for No Bus:digi_ctl47
[   16.736054] device: 'digi_ctl48': device_add
[   16.740098] PM: Adding info for No Bus:digi_ctl48
[   16.744054] device: 'digi_ctl49': device_add
[   16.748097] PM: Adding info for No Bus:digi_ctl49
[   16.752054] device: 'digi_ctl50': device_add
[   16.756098] PM: Adding info for No Bus:digi_ctl50
[   16.760054] device: 'digi_ctl51': device_add
[   16.764107] PM: Adding info for No Bus:digi_ctl51
[   16.768056] device: 'digi_ctl52': device_add
[   16.772101] PM: Adding info for No Bus:digi_ctl52
[   16.776054] device: 'digi_ctl53': device_add
[   16.780098] PM: Adding info for No Bus:digi_ctl53
[   16.784054] device: 'digi_ctl54': device_add
[   16.788099] PM: Adding info for No Bus:digi_ctl54
[   16.792054] device: 'digi_ctl55': device_add
[   16.796099] PM: Adding info for No Bus:digi_ctl55
[   16.800054] device: 'digi_ctl56': device_add
[   16.804099] PM: Adding info for No Bus:digi_ctl56
[   16.808054] device: 'digi_ctl57': device_add
[   16.812109] PM: Adding info for No Bus:digi_ctl57
[   16.816068] device: 'digi_ctl58': device_add
[   16.820110] PM: Adding info for No Bus:digi_ctl58
[   16.824064] device: 'digi_ctl59': device_add
[   16.828106] PM: Adding info for No Bus:digi_ctl59
[   16.832056] device: 'digi_ctl60': device_add
[   16.840110] PM: Adding info for No Bus:digi_ctl60
[   16.844056] device: 'digi_ctl61': device_add
[   16.848103] PM: Adding info for No Bus:digi_ctl61
[   16.852055] device: 'digi_ctl62': device_add
[   16.856100] PM: Adding info for No Bus:digi_ctl62
[   16.860055] device: 'digi_ctl63': device_add
[   16.864110] PM: Adding info for No Bus:digi_ctl63
[   16.868056] device: 'digi_ctl64': device_add
[   16.872105] PM: Adding info for No Bus:digi_ctl64
[   16.876055] device: 'digi_ctl65': device_add
[   16.880101] PM: Adding info for No Bus:digi_ctl65
[   16.884064] device: 'digi_ctl66': device_add
[   16.888106] PM: Adding info for No Bus:digi_ctl66
[   16.892055] device: 'digi_ctl67': device_add
[   16.900037] PM: Adding info for No Bus:digi_ctl67
[   16.904054] device: 'digi_ctl68': device_add
[   16.908123] PM: Adding info for No Bus:digi_ctl68
[   16.912055] device: 'digi_ctl69': device_add
[   16.916123] PM: Adding info for No Bus:digi_ctl69
[   16.920056] device: 'digi_ctl70': device_add
[   16.924112] PM: Adding info for No Bus:digi_ctl70
[   16.928055] device: 'digi_ctl71': device_add
[   16.932104] PM: Adding info for No Bus:digi_ctl71
[   16.936063] device: 'digi_ctl72': device_add
[   16.940110] PM: Adding info for No Bus:digi_ctl72
[   16.944055] device: 'digi_ctl73': device_add
[   16.948103] PM: Adding info for No Bus:digi_ctl73
[   16.952054] device: 'digi_ctl74': device_add
[   16.960013] PM: Adding info for No Bus:digi_ctl74
[   16.964054] device: 'digi_ctl75': device_add
[   16.968112] PM: Adding info for No Bus:digi_ctl75
[   16.972056] device: 'digi_ctl76': device_add
[   16.976106] PM: Adding info for No Bus:digi_ctl76
[   16.980055] device: 'digi_ctl77': device_add
[   16.984106] PM: Adding info for No Bus:digi_ctl77
[   16.988055] device: 'digi_ctl78': device_add
[   16.992120] PM: Adding info for No Bus:digi_ctl78
[   16.996056] device: 'digi_ctl79': device_add
[   17.000107] PM: Adding info for No Bus:digi_ctl79
[   17.004055] device: 'digi_ctl80': device_add
[   17.008104] PM: Adding info for No Bus:digi_ctl80
[   17.012055] device: 'digi_ctl81': device_add
[   17.016114] PM: Adding info for No Bus:digi_ctl81
[   17.020066] device: 'digi_ctl82': device_add
[   17.024111] PM: Adding info for No Bus:digi_ctl82
[   17.028056] device: 'digi_ctl83': device_add
[   17.032105] PM: Adding info for No Bus:digi_ctl83
[   17.036055] device: 'digi_ctl84': device_add
[   17.040105] PM: Adding info for No Bus:digi_ctl84
[   17.044064] device: 'digi_ctl85': device_add
[   17.048111] PM: Adding info for No Bus:digi_ctl85
[   17.052055] device: 'digi_ctl86': device_add
[   17.056106] PM: Adding info for No Bus:digi_ctl86
[   17.060055] device: 'digi_ctl87': device_add
[   17.064115] PM: Adding info for No Bus:digi_ctl87
[   17.068056] device: 'digi_ctl88': device_add
[   17.072110] PM: Adding info for No Bus:digi_ctl88
[   17.076055] device: 'digi_ctl89': device_add
[   17.080106] PM: Adding info for No Bus:digi_ctl89
[   17.084055] device: 'digi_ctl90': device_add
[   17.088106] PM: Adding info for No Bus:digi_ctl90
[   17.092054] device: 'digi_ctl91': device_add
[   17.096106] PM: Adding info for No Bus:digi_ctl91
[   17.100055] device: 'digi_ctl92': device_add
[   17.104108] PM: Adding info for No Bus:digi_ctl92
[   17.108055] device: 'digi_ctl93': device_add
[   17.112116] PM: Adding info for No Bus:digi_ctl93
[   17.116064] device: 'digi_ctl94': device_add
[   17.120116] PM: Adding info for No Bus:digi_ctl94
[   17.124056] device: 'digi_ctl95': device_add
[   17.128108] PM: Adding info for No Bus:digi_ctl95
[   17.132054] device: 'digi_ctl96': device_add
[   17.136108] PM: Adding info for No Bus:digi_ctl96
[   17.140054] device: 'digi_ctl97': device_add
[   17.144108] PM: Adding info for No Bus:digi_ctl97
[   17.148064] device: 'digi_ctl98': device_add
[   17.152114] PM: Adding info for No Bus:digi_ctl98
[   17.156056] device: 'digi_ctl99': device_add
[   17.160118] PM: Adding info for No Bus:digi_ctl99
[   17.164056] device: 'digi_ctl100': device_add
[   17.168116] PM: Adding info for No Bus:digi_ctl100
[   17.172055] device: 'digi_ctl101': device_add
[   17.176110] PM: Adding info for No Bus:digi_ctl101
[   17.180055] device: 'digi_ctl102': device_add
[   17.184110] PM: Adding info for No Bus:digi_ctl102
[   17.188054] device: 'digi_ctl103': device_add
[   17.192127] PM: Adding info for No Bus:digi_ctl103
[   17.196056] device: 'digi_ctl104': device_add
[   17.200111] PM: Adding info for No Bus:digi_ctl104
[   17.204055] device: 'digi_ctl105': device_add
[   17.208119] PM: Adding info for No Bus:digi_ctl105
[   17.212056] device: 'digi_ctl106': device_add
[   17.216115] PM: Adding info for No Bus:digi_ctl106
[   17.220055] device: 'digi_ctl107': device_add
[   17.224111] PM: Adding info for No Bus:digi_ctl107
[   17.228055] device: 'digi_ctl108': device_add
[   17.232111] PM: Adding info for No Bus:digi_ctl108
[   17.236055] device: 'digi_ctl109': device_add
[   17.240112] PM: Adding info for No Bus:digi_ctl109
[   17.244055] device: 'digi_ctl110': device_add
[   17.248110] PM: Adding info for No Bus:digi_ctl110
[   17.252064] device: 'digi_ctl111': device_add
[   17.256127] PM: Adding info for No Bus:digi_ctl111
[   17.260056] device: 'digi_ctl112': device_add
[   17.264117] PM: Adding info for No Bus:digi_ctl112
[   17.268055] device: 'digi_ctl113': device_add
[   17.272111] PM: Adding info for No Bus:digi_ctl113
[   17.276055] device: 'digi_ctl114': device_add
[   17.280124] PM: Adding info for No Bus:digi_ctl114
[   17.284057] device: 'digi_ctl115': device_add
[   17.288118] PM: Adding info for No Bus:digi_ctl115
[   17.292055] device: 'digi_ctl116': device_add
[   17.296113] PM: Adding info for No Bus:digi_ctl116
[   17.300055] device: 'digi_ctl117': device_add
[   17.308088] PM: Adding info for No Bus:digi_ctl117
[   17.312056] device: 'digi_ctl118': device_add
[   17.316119] PM: Adding info for No Bus:digi_ctl118
[   17.320055] device: 'digi_ctl119': device_add
[   17.324114] PM: Adding info for No Bus:digi_ctl119
[   17.328055] device: 'digi_ctl120': device_add
[   17.336037] PM: Adding info for No Bus:digi_ctl120
[   17.340054] device: 'digi_ctl121': device_add
[   17.344116] PM: Adding info for No Bus:digi_ctl121
[   17.348064] device: 'digi_ctl122': device_add
[   17.352119] PM: Adding info for No Bus:digi_ctl122
[   17.356056] device: 'digi_ctl123': device_add
[   17.364014] PM: Adding info for No Bus:digi_ctl123
[   17.368063] device: 'digi_ctl124': device_add
[   17.372133] PM: Adding info for No Bus:digi_ctl124
[   17.376057] device: 'digi_ctl125': device_add
[   17.380120] PM: Adding info for No Bus:digi_ctl125
[   17.384055] device: 'digi_ctl126': device_add
[   17.392004] PM: Adding info for No Bus:digi_ctl126
[   17.396054] device: 'digi_ctl127': device_add
[   17.400115] PM: Adding info for No Bus:digi_ctl127
[   17.404055] device: 'digi_ctl128': device_add
[   17.408115] PM: Adding info for No Bus:digi_ctl128
[   17.412055] device: 'digi_ctl129': device_add
[   17.416128] PM: Adding info for No Bus:digi_ctl129
[   17.420056] device: 'digi_ctl130': device_add
[   17.424123] PM: Adding info for No Bus:digi_ctl130
[   17.428055] device: 'digi_ctl131': device_add
[   17.432117] PM: Adding info for No Bus:digi_ctl131
[   17.436055] device: 'digi_ctl132': device_add
[   17.440116] PM: Adding info for No Bus:digi_ctl132
[   17.444054] device: 'digi_ctl133': device_add
[   17.448116] PM: Adding info for No Bus:digi_ctl133
[   17.452054] device: 'digi_ctl134': device_add
[   17.456117] PM: Adding info for No Bus:digi_ctl134
[   17.460055] device: 'digi_ctl135': device_add
[   17.464126] PM: Adding info for No Bus:digi_ctl135
[   17.468056] device: 'digi_ctl136': device_add
[   17.472123] PM: Adding info for No Bus:digi_ctl136
[   17.476064] device: 'digi_ctl137': device_add
[   17.480124] PM: Adding info for No Bus:digi_ctl137
[   17.484056] device: 'digi_ctl138': device_add
[   17.488119] PM: Adding info for No Bus:digi_ctl138
[   17.492055] device: 'digi_ctl139': device_add
[   17.496121] PM: Adding info for No Bus:digi_ctl139
[   17.500055] device: 'digi_ctl140': device_add
[   17.504119] PM: Adding info for No Bus:digi_ctl140
[   17.508055] device: 'digi_ctl141': device_add
[   17.512128] PM: Adding info for No Bus:digi_ctl141
[   17.516057] device: 'digi_ctl142': device_add
[   17.520125] PM: Adding info for No Bus:digi_ctl142
[   17.524055] device: 'digi_ctl143': device_add
[   17.528119] PM: Adding info for No Bus:digi_ctl143
[   17.532055] device: 'digi_ctl144': device_add
[   17.536120] PM: Adding info for No Bus:digi_ctl144
[   17.540055] device: 'digi_ctl145': device_add
[   17.544121] PM: Adding info for No Bus:digi_ctl145
[   17.548066] device: 'digi_ctl146': device_add
[   17.552126] PM: Adding info for No Bus:digi_ctl146
[   17.556056] device: 'digi_ctl147': device_add
[   17.560130] PM: Adding info for No Bus:digi_ctl147
[   17.564056] device: 'digi_ctl148': device_add
[   17.568126] PM: Adding info for No Bus:digi_ctl148
[   17.572055] device: 'digi_ctl149': device_add
[   17.576122] PM: Adding info for No Bus:digi_ctl149
[   17.580071] device: 'digi_ctl150': device_add
[   17.584129] PM: Adding info for No Bus:digi_ctl150
[   17.588057] device: 'digi_ctl151': device_add
[   17.592139] PM: Adding info for No Bus:digi_ctl151
[   17.596057] device: 'digi_ctl152': device_add
[   17.600126] PM: Adding info for No Bus:digi_ctl152
[   17.604055] device: 'digi_ctl153': device_add
[   17.608132] PM: Adding info for No Bus:digi_ctl153
[   17.612057] device: 'digi_ctl154': device_add
[   17.616128] PM: Adding info for No Bus:digi_ctl154
[   17.620055] device: 'digi_ctl155': device_add
[   17.624123] PM: Adding info for No Bus:digi_ctl155
[   17.628055] device: 'digi_ctl156': device_add
[   17.632123] PM: Adding info for No Bus:digi_ctl156
[   17.636055] device: 'digi_ctl157': device_add
[   17.640122] PM: Adding info for No Bus:digi_ctl157
[   17.644055] device: 'digi_ctl158': device_add
[   17.648123] PM: Adding info for No Bus:digi_ctl158
[   17.652055] device: 'digi_ctl159': device_add
[   17.656134] PM: Adding info for No Bus:digi_ctl159
[   17.660057] device: 'digi_ctl160': device_add
[   17.664129] PM: Adding info for No Bus:digi_ctl160
[   17.668055] device: 'digi_ctl161': device_add
[   17.672124] PM: Adding info for No Bus:digi_ctl161
[   17.676055] device: 'digi_ctl162': device_add
[   17.680125] PM: Adding info for No Bus:digi_ctl162
[   17.684064] device: 'digi_ctl163': device_add
[   17.688132] PM: Adding info for No Bus:digi_ctl163
[   17.692056] device: 'digi_ctl164': device_add
[   17.696127] PM: Adding info for No Bus:digi_ctl164
[   17.700055] device: 'digi_ctl165': device_add
[   17.704137] PM: Adding info for No Bus:digi_ctl165
[   17.708057] device: 'digi_ctl166': device_add
[   17.712133] PM: Adding info for No Bus:digi_ctl166
[   17.716055] device: 'digi_ctl167': device_add
[   17.720145] PM: Adding info for No Bus:digi_ctl167
[   17.724057] device: 'digi_ctl168': device_add
[   17.728129] PM: Adding info for No Bus:digi_ctl168
[   17.732055] device: 'digi_ctl169': device_add
[   17.736128] PM: Adding info for No Bus:digi_ctl169
[   17.740055] device: 'digi_ctl170': device_add
[   17.744129] PM: Adding info for No Bus:digi_ctl170
[   17.748055] device: 'digi_ctl171': device_add
[   17.752142] PM: Adding info for No Bus:digi_ctl171
[   17.756057] device: 'digi_ctl172': device_add
[   17.760137] PM: Adding info for No Bus:digi_ctl172
[   17.764055] device: 'digi_ctl173': device_add
[   17.768131] PM: Adding info for No Bus:digi_ctl173
[   17.772055] device: 'digi_ctl174': device_add
[   17.776130] PM: Adding info for No Bus:digi_ctl174
[   17.780055] device: 'digi_ctl175': device_add
[   17.784131] PM: Adding info for No Bus:digi_ctl175
[   17.788063] device: 'digi_ctl176': device_add
[   17.792139] PM: Adding info for No Bus:digi_ctl176
[   17.796057] device: 'digi_ctl177': device_add
[   17.800142] PM: Adding info for No Bus:digi_ctl177
[   17.804065] device: 'digi_ctl178': device_add
[   17.808141] PM: Adding info for No Bus:digi_ctl178
[   17.812057] device: 'digi_ctl179': device_add
[   17.816151] PM: Adding info for No Bus:digi_ctl179
[   17.820056] device: 'digi_ctl180': device_add
[   17.824133] PM: Adding info for No Bus:digi_ctl180
[   17.828055] device: 'digi_ctl181': device_add
[   17.832132] PM: Adding info for No Bus:digi_ctl181
[   17.836055] device: 'digi_ctl182': device_add
[   17.840133] PM: Adding info for No Bus:digi_ctl182
[   17.844055] device: 'digi_ctl183': device_add
[   17.848142] PM: Adding info for No Bus:digi_ctl183
[   17.852057] device: 'digi_ctl184': device_add
[   17.856139] PM: Adding info for No Bus:digi_ctl184
[   17.860056] device: 'digi_ctl185': device_add
[   17.864133] PM: Adding info for No Bus:digi_ctl185
[   17.868055] device: 'digi_ctl186': device_add
[   17.872133] PM: Adding info for No Bus:digi_ctl186
[   17.876055] device: 'digi_ctl187': device_add
[   17.880146] PM: Adding info for No Bus:digi_ctl187
[   17.884057] device: 'digi_ctl188': device_add
[   17.888153] PM: Adding info for No Bus:digi_ctl188
[   17.892065] device: 'digi_ctl189': device_add
[   17.896150] PM: Adding info for No Bus:digi_ctl189
[   17.900057] device: 'digi_ctl190': device_add
[   17.904141] PM: Adding info for No Bus:digi_ctl190
[   17.908055] device: 'digi_ctl191': device_add
[   17.912136] PM: Adding info for No Bus:digi_ctl191
[   17.916055] device: 'digi_ctl192': device_add
[   17.920135] PM: Adding info for No Bus:digi_ctl192
[   17.924055] device: 'digi_ctl193': device_add
[   17.928135] PM: Adding info for No Bus:digi_ctl193
[   17.932055] device: 'digi_ctl194': device_add
[   17.936134] PM: Adding info for No Bus:digi_ctl194
[   17.940055] device: 'digi_ctl195': device_add
[   17.944146] PM: Adding info for No Bus:digi_ctl195
[   17.948057] device: 'digi_ctl196': device_add
[   17.952141] PM: Adding info for No Bus:digi_ctl196
[   17.956055] device: 'digi_ctl197': device_add
[   17.960135] PM: Adding info for No Bus:digi_ctl197
[   17.964055] device: 'digi_ctl198': device_add
[   17.968136] PM: Adding info for No Bus:digi_ctl198
[   17.972055] device: 'digi_ctl199': device_add
[   17.976136] PM: Adding info for No Bus:digi_ctl199
[   17.980055] device: 'digi_ctl200': device_add
[   17.984134] PM: Adding info for No Bus:digi_ctl200
[   17.988055] device: 'digi_ctl201': device_add
[   17.992145] PM: Adding info for No Bus:digi_ctl201
[   17.996065] device: 'digi_ctl202': device_add
[   18.000146] PM: Adding info for No Bus:digi_ctl202
[   18.004056] device: 'digi_ctl203': device_add
[   18.008140] PM: Adding info for No Bus:digi_ctl203
[   18.012055] device: 'digi_ctl204': device_add
[   18.016137] PM: Adding info for No Bus:digi_ctl204
[   18.020055] device: 'digi_ctl205': device_add
[   18.024137] PM: Adding info for No Bus:digi_ctl205
[   18.028065] device: 'digi_ctl206': device_add
[   18.032145] PM: Adding info for No Bus:digi_ctl206
[   18.036056] device: 'digi_ctl207': device_add
[   18.040147] PM: Adding info for No Bus:digi_ctl207
[   18.044057] device: 'digi_ctl208': device_add
[   18.048143] PM: Adding info for No Bus:digi_ctl208
[   18.052055] device: 'digi_ctl209': device_add
[   18.056139] PM: Adding info for No Bus:digi_ctl209
[   18.060066] device: 'digi_ctl210': device_add
[   18.068027] PM: Adding info for No Bus:digi_ctl210
[   18.072056] device: 'digi_ctl211': device_add
[   18.076153] PM: Adding info for No Bus:digi_ctl211
[   18.080055] device: 'digi_ctl212': device_add
[   18.084142] PM: Adding info for No Bus:digi_ctl212
[   18.088055] device: 'digi_ctl213': device_add
[   18.096075] PM: Adding info for No Bus:digi_ctl213
[   18.100057] device: 'digi_ctl214': device_add
[   18.104146] PM: Adding info for No Bus:digi_ctl214
[   18.108067] device: 'digi_ctl215': device_add
[   18.112147] PM: Adding info for No Bus:digi_ctl215
[   18.116057] device: 'digi_ctl216': device_add
[   18.124118] PM: Adding info for No Bus:digi_ctl216
[   18.128055] device: 'digi_ctl217': device_add
[   18.132139] PM: Adding info for No Bus:digi_ctl217
[   18.136055] device: 'digi_ctl218': device_add
[   18.140140] PM: Adding info for No Bus:digi_ctl218
[   18.144055] device: 'digi_ctl219': device_add
[   18.148151] PM: Adding info for No Bus:digi_ctl219
[   18.152057] device: 'digi_ctl220': device_add
[   18.156148] PM: Adding info for No Bus:digi_ctl220
[   18.160055] device: 'digi_ctl221': device_add
[   18.164141] PM: Adding info for No Bus:digi_ctl221
[   18.168055] device: 'digi_ctl222': device_add
[   18.172141] PM: Adding info for No Bus:digi_ctl222
[   18.176055] device: 'digi_ctl223': device_add
[   18.180141] PM: Adding info for No Bus:digi_ctl223
[   18.184056] device: 'digi_ctl224': device_add
[   18.188158] PM: Adding info for No Bus:digi_ctl224
[   18.192058] device: 'digi_ctl225': device_add
[   18.196155] PM: Adding info for No Bus:digi_ctl225
[   18.200058] device: 'digi_ctl226': device_add
[   18.204149] PM: Adding info for No Bus:digi_ctl226
[   18.208055] device: 'digi_ctl227': device_add
[   18.212143] PM: Adding info for No Bus:digi_ctl227
[   18.216064] device: 'digi_ctl228': device_add
[   18.220153] PM: Adding info for No Bus:digi_ctl228
[   18.224057] device: 'digi_ctl229': device_add
[   18.228144] PM: Adding info for No Bus:digi_ctl229
[   18.232055] device: 'digi_ctl230': device_add
[   18.236143] PM: Adding info for No Bus:digi_ctl230
[   18.240056] device: 'digi_ctl231': device_add
[   18.244170] PM: Adding info for No Bus:digi_ctl231
[   18.248057] device: 'digi_ctl232': device_add
[   18.252153] PM: Adding info for No Bus:digi_ctl232
[   18.256055] device: 'digi_ctl233': device_add
[   18.260147] PM: Adding info for No Bus:digi_ctl233
[   18.264067] device: 'digi_ctl234': device_add
[   18.268156] PM: Adding info for No Bus:digi_ctl234
[   18.272057] device: 'digi_ctl235': device_add
[   18.276146] PM: Adding info for No Bus:digi_ctl235
[   18.280055] device: 'digi_ctl236': device_add
[   18.284147] PM: Adding info for No Bus:digi_ctl236
[   18.288056] device: 'digi_ctl237': device_add
[   18.292156] PM: Adding info for No Bus:digi_ctl237
[   18.296057] device: 'digi_ctl238': device_add
[   18.300152] PM: Adding info for No Bus:digi_ctl238
[   18.304056] device: 'digi_ctl239': device_add
[   18.308146] PM: Adding info for No Bus:digi_ctl239
[   18.316007] device: 'digi_ctl240': device_add
[   18.320146] PM: Adding info for No Bus:digi_ctl240
[   18.324064] device: 'digi_ctl241': device_add
[   18.328154] PM: Adding info for No Bus:digi_ctl241
[   18.332056] device: 'digi_ctl242': device_add
[   18.336147] PM: Adding info for No Bus:digi_ctl242
[   18.344035] device: 'digi_ctl243': device_add
[   18.348155] PM: Adding info for No Bus:digi_ctl243
[   18.352057] device: 'digi_ctl244': device_add
[   18.356154] PM: Adding info for No Bus:digi_ctl244
[   18.360056] device: 'digi_ctl245': device_add
[   18.364148] PM: Adding info for No Bus:digi_ctl245
[   18.368055] device: 'digi_ctl246': device_add
[   18.372148] PM: Adding info for No Bus:digi_ctl246
[   18.376055] device: 'digi_ctl247': device_add
[   18.380148] PM: Adding info for No Bus:digi_ctl247
[   18.384055] device: 'digi_ctl248': device_add
[   18.388148] PM: Adding info for No Bus:digi_ctl248
[   18.392056] device: 'digi_ctl249': device_add
[   18.396158] PM: Adding info for No Bus:digi_ctl249
[   18.400058] device: 'digi_ctl250': device_add
[   18.404156] PM: Adding info for No Bus:digi_ctl250
[   18.408056] device: 'digi_ctl251': device_add
[   18.412151] PM: Adding info for No Bus:digi_ctl251
[   18.416056] device: 'digi_ctl252': device_add
[   18.420162] PM: Adding info for No Bus:digi_ctl252
[   18.424057] device: 'digi_ctl253': device_add
[   18.428160] PM: Adding info for No Bus:digi_ctl253
[   18.432065] device: 'digi_ctl254': device_add
[   18.436159] PM: Adding info for No Bus:digi_ctl254
[   18.440057] device: 'digi_ctl255': device_add
[   18.444160] PM: Adding info for No Bus:digi_ctl255
[   18.448062] initcall epca_module_init+0x0/0x39e returned 0 after 4082031 usecs
[   18.452004] calling  specialix_init_module+0x0/0x386 @ 1
[   18.456002] sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998.
[   18.460001] sx: derived from work (c) D.Gorodchanin 1994-1996.
[   18.464001] sx: DTR/RTS pin is always RTS.
[   18.468015] device: 'ttyW0': device_add
[   18.472162] PM: Adding info for No Bus:ttyW0
[   18.476056] device: 'ttyW1': device_add
[   18.480145] PM: Adding info for No Bus:ttyW1
[   18.484055] device: 'ttyW2': device_add
[   18.488167] PM: Adding info for No Bus:ttyW2
[   18.492057] device: 'ttyW3': device_add
[   18.496145] PM: Adding info for No Bus:ttyW3
[   18.500056] device: 'ttyW4': device_add
[   18.504144] PM: Adding info for No Bus:ttyW4
[   18.508065] device: 'ttyW5': device_add
[   18.512150] PM: Adding info for No Bus:ttyW5
[   18.516057] device: 'ttyW6': device_add
[   18.520156] PM: Adding info for No Bus:ttyW6
[   18.524056] device: 'ttyW7': device_add
[   18.528148] PM: Adding info for No Bus:ttyW7
[   18.532055] device: 'ttyW8': device_add
[   18.536147] PM: Adding info for No Bus:ttyW8
[   18.540055] device: 'ttyW9': device_add
[   18.544145] PM: Adding info for No Bus:ttyW9
[   18.548055] device: 'ttyW10': device_add
[   18.552146] PM: Adding info for No Bus:ttyW10
[   18.556064] device: 'ttyW11': device_add
[   18.560166] PM: Adding info for No Bus:ttyW11
[   18.564057] device: 'ttyW12': device_add
[   18.568156] PM: Adding info for No Bus:ttyW12
[   18.572056] device: 'ttyW13': device_add
[   18.576147] PM: Adding info for No Bus:ttyW13
[   18.580055] device: 'ttyW14': device_add
[   18.584147] PM: Adding info for No Bus:ttyW14
[   18.588056] device: 'ttyW15': device_add
[   18.592147] PM: Adding info for No Bus:ttyW15
[   18.596055] device: 'ttyW16': device_add
[   18.600148] PM: Adding info for No Bus:ttyW16
[   18.604055] device: 'ttyW17': device_add
[   18.608159] PM: Adding info for No Bus:ttyW17
[   18.612058] device: 'ttyW18': device_add
[   18.616157] PM: Adding info for No Bus:ttyW18
[   18.620055] device: 'ttyW19': device_add
[   18.624151] PM: Adding info for No Bus:ttyW19
[   18.628055] device: 'ttyW20': device_add
[   18.632167] PM: Adding info for No Bus:ttyW20
[   18.636057] device: 'ttyW21': device_add
[   18.640154] PM: Adding info for No Bus:ttyW21
[   18.644055] device: 'ttyW22': device_add
[   18.648153] PM: Adding info for No Bus:ttyW22
[   18.652056] device: 'ttyW23': device_add
[   18.656161] PM: Adding info for No Bus:ttyW23
[   18.660064] device: 'ttyW24': device_add
[   18.664163] PM: Adding info for No Bus:ttyW24
[   18.668056] device: 'ttyW25': device_add
[   18.672154] PM: Adding info for No Bus:ttyW25
[   18.676055] device: 'ttyW26': device_add
[   18.680154] PM: Adding info for No Bus:ttyW26
[   18.684055] device: 'ttyW27': device_add
[   18.688156] PM: Adding info for No Bus:ttyW27
[   18.692055] device: 'ttyW28': device_add
[   18.696154] PM: Adding info for No Bus:ttyW28
[   18.700055] device: 'ttyW29': device_add
[   18.704166] PM: Adding info for No Bus:ttyW29
[   18.708057] device: 'ttyW30': device_add
[   18.712161] PM: Adding info for No Bus:ttyW30
[   18.720019] device: 'ttyW31': device_add
[   18.724094] PM: Adding info for No Bus:ttyW31
[   18.728056] device: 'ttyW32': device_add
[   18.732157] PM: Adding info for No Bus:ttyW32
[   18.736066] device: 'ttyW33': device_add
[   18.740165] PM: Adding info for No Bus:ttyW33
[   18.744057] device: 'ttyW34': device_add
[   18.748157] PM: Adding info for No Bus:ttyW34
[   18.752056] device: 'ttyW35': device_add
[   18.756167] PM: Adding info for No Bus:ttyW35
[   18.760057] device: 'ttyW36': device_add
[   18.764165] PM: Adding info for No Bus:ttyW36
[   18.768066] device: 'ttyW37': device_add
[   18.772167] PM: Adding info for No Bus:ttyW37
[   18.776059] device: 'ttyW38': device_add
[   18.780173] PM: Adding info for No Bus:ttyW38
[   18.788034] device: 'ttyW39': device_add
[   18.792124] PM: Adding info for No Bus:ttyW39
[   18.796056] device: 'ttyW40': device_add
[   18.800159] PM: Adding info for No Bus:ttyW40
[   18.804056] device: 'ttyW41': device_add
[   18.808171] PM: Adding info for No Bus:ttyW41
[   18.812057] device: 'ttyW42': device_add
[   18.816192] PM: Adding info for No Bus:ttyW42
[   18.820057] device: 'ttyW43': device_add
[   18.824164] PM: Adding info for No Bus:ttyW43
[   18.828056] device: 'ttyW44': device_add
[   18.832161] PM: Adding info for No Bus:ttyW44
[   18.836056] device: 'ttyW45': device_add
[   18.840161] PM: Adding info for No Bus:ttyW45
[   18.844056] device: 'ttyW46': device_add
[   18.848165] PM: Adding info for No Bus:ttyW46
[   18.856036] device: 'ttyW47': device_add
[   18.860147] PM: Adding info for No Bus:ttyW47
[   18.864057] device: 'ttyW48': device_add
[   18.868172] PM: Adding info for No Bus:ttyW48
[   18.872056] device: 'ttyW49': device_add
[   18.876165] PM: Adding info for No Bus:ttyW49
[   18.880068] device: 'ttyW50': device_add
[   18.884174] PM: Adding info for No Bus:ttyW50
[   18.888059] device: 'ttyW51': device_add
[   18.892166] PM: Adding info for No Bus:ttyW51
[   18.896056] device: 'ttyW52': device_add
[   18.900165] PM: Adding info for No Bus:ttyW52
[   18.904056] device: 'ttyW53': device_add
[   18.908176] PM: Adding info for No Bus:ttyW53
[   18.912058] device: 'ttyW54': device_add
[   18.916185] PM: Adding info for No Bus:ttyW54
[   18.920057] device: 'ttyW55': device_add
[   18.924174] PM: Adding info for No Bus:ttyW55
[   18.928057] device: 'ttyW56': device_add
[   18.932169] PM: Adding info for No Bus:ttyW56
[   18.936068] device: 'ttyW57': device_add
[   18.940176] PM: Adding info for No Bus:ttyW57
[   18.944057] device: 'ttyW58': device_add
[   18.948167] PM: Adding info for No Bus:ttyW58
[   18.952056] device: 'ttyW59': device_add
[   18.956179] PM: Adding info for No Bus:ttyW59
[   18.960058] device: 'ttyW60': device_add
[   18.964178] PM: Adding info for No Bus:ttyW60
[   18.968066] device: 'ttyW61': device_add
[   18.972180] PM: Adding info for No Bus:ttyW61
[   18.976057] device: 'ttyW62': device_add
[   18.980169] PM: Adding info for No Bus:ttyW62
[   18.984065] device: 'ttyW63': device_add
[   18.988177] PM: Adding info for No Bus:ttyW63
[   18.992079] sx0: specialix IO8+ Board at 0x100 not found.
[   18.996012] sx1: specialix IO8+ Board at 0x180 not found.
[   19.000011] sx2: specialix IO8+ Board at 0x250 not found.
[   19.004011] sx3: specialix IO8+ Board at 0x260 not found.
[   19.008234] device: 'ttyW0': device_unregister
[   19.012002] PM: Removing info for No Bus:ttyW0
[   19.016190] device: 'ttyW0': device_create_release
[   19.020165] device: 'ttyW1': device_unregister
[   19.024002] PM: Removing info for No Bus:ttyW1
[   19.028174] device: 'ttyW1': device_create_release
[   19.032161] device: 'ttyW2': device_unregister
[   19.036002] PM: Removing info for No Bus:ttyW2
[   19.040175] device: 'ttyW2': device_create_release
[   19.044158] device: 'ttyW3': device_unregister
[   19.048003] PM: Removing info for No Bus:ttyW3
[   19.052175] device: 'ttyW3': device_create_release
[   19.056158] device: 'ttyW4': device_unregister
[   19.060002] PM: Removing info for No Bus:ttyW4
[   19.064177] device: 'ttyW4': device_create_release
[   19.068158] device: 'ttyW5': device_unregister
[   19.072002] PM: Removing info for No Bus:ttyW5
[   19.076176] device: 'ttyW5': device_create_release
[   19.080159] device: 'ttyW6': device_unregister
[   19.084002] PM: Removing info for No Bus:ttyW6
[   19.088174] device: 'ttyW6': device_create_release
[   19.092158] device: 'ttyW7': device_unregister
[   19.096002] PM: Removing info for No Bus:ttyW7
[   19.100173] device: 'ttyW7': device_create_release
[   19.104158] device: 'ttyW8': device_unregister
[   19.108002] PM: Removing info for No Bus:ttyW8
[   19.112177] device: 'ttyW8': device_create_release
[   19.116159] device: 'ttyW9': device_unregister
[   19.120002] PM: Removing info for No Bus:ttyW9
[   19.124182] device: 'ttyW9': device_create_release
[   19.128160] device: 'ttyW10': device_unregister
[   19.132002] PM: Removing info for No Bus:ttyW10
[   19.140021] device: 'ttyW10': device_create_release
[   19.144160] device: 'ttyW11': device_unregister
[   19.148002] PM: Removing info for No Bus:ttyW11
[   19.152196] device: 'ttyW11': device_create_release
[   19.156164] device: 'ttyW12': device_unregister
[   19.160002] PM: Removing info for No Bus:ttyW12
[   19.164180] device: 'ttyW12': device_create_release
[   19.168161] device: 'ttyW13': device_unregister
[   19.172002] PM: Removing info for No Bus:ttyW13
[   19.176179] device: 'ttyW13': device_create_release
[   19.180160] device: 'ttyW14': device_unregister
[   19.184002] PM: Removing info for No Bus:ttyW14
[   19.188182] device: 'ttyW14': device_create_release
[   19.192161] device: 'ttyW15': device_unregister
[   19.196002] PM: Removing info for No Bus:ttyW15
[   19.200185] device: 'ttyW15': device_create_release
[   19.204161] device: 'ttyW16': device_unregister
[   19.208003] PM: Removing info for No Bus:ttyW16
[   19.212189] device: 'ttyW16': device_create_release
[   19.216161] device: 'ttyW17': device_unregister
[   19.220002] PM: Removing info for No Bus:ttyW17
[   19.224199] device: 'ttyW17': device_create_release
[   19.228165] device: 'ttyW18': device_unregister
[   19.232002] PM: Removing info for No Bus:ttyW18
[   19.236184] device: 'ttyW18': device_create_release
[   19.240163] device: 'ttyW19': device_unregister
[   19.244002] PM: Removing info for No Bus:ttyW19
[   19.248185] device: 'ttyW19': device_create_release
[   19.252163] device: 'ttyW20': device_unregister
[   19.256002] PM: Removing info for No Bus:ttyW20
[   19.260179] device: 'ttyW20': device_create_release
[   19.264179] device: 'ttyW21': device_unregister
[   19.268002] PM: Removing info for No Bus:ttyW21
[   19.272182] device: 'ttyW21': device_create_release
[   19.276160] device: 'ttyW22': device_unregister
[   19.280002] PM: Removing info for No Bus:ttyW22
[   19.284181] device: 'ttyW22': device_create_release
[   19.288163] device: 'ttyW23': device_unregister
[   19.292002] PM: Removing info for No Bus:ttyW23
[   19.296193] device: 'ttyW23': device_create_release
[   19.300175] device: 'ttyW24': device_unregister
[   19.304002] PM: Removing info for No Bus:ttyW24
[   19.308178] device: 'ttyW24': device_create_release
[   19.312160] device: 'ttyW25': device_unregister
[   19.316002] PM: Removing info for No Bus:ttyW25
[   19.320174] device: 'ttyW25': device_create_release
[   19.324159] device: 'ttyW26': device_unregister
[   19.328003] PM: Removing info for No Bus:ttyW26
[   19.332177] device: 'ttyW26': device_create_release
[   19.336159] device: 'ttyW27': device_unregister
[   19.340002] PM: Removing info for No Bus:ttyW27
[   19.344180] device: 'ttyW27': device_create_release
[   19.348159] device: 'ttyW28': device_unregister
[   19.352002] PM: Removing info for No Bus:ttyW28
[   19.356183] device: 'ttyW28': device_create_release
[   19.360160] device: 'ttyW29': device_unregister
[   19.364002] PM: Removing info for No Bus:ttyW29
[   19.368196] device: 'ttyW29': device_create_release
[   19.372162] device: 'ttyW30': device_unregister
[   19.376002] PM: Removing info for No Bus:ttyW30
[   19.380180] device: 'ttyW30': device_create_release
[   19.384160] device: 'ttyW31': device_unregister
[   19.388002] PM: Removing info for No Bus:ttyW31
[   19.392179] device: 'ttyW31': device_create_release
[   19.396160] device: 'ttyW32': device_unregister
[   19.400002] PM: Removing info for No Bus:ttyW32
[   19.404181] device: 'ttyW32': device_create_release
[   19.408176] device: 'ttyW33': device_unregister
[   19.412002] PM: Removing info for No Bus:ttyW33
[   19.416188] device: 'ttyW33': device_create_release
[   19.420161] device: 'ttyW34': device_unregister
[   19.424002] PM: Removing info for No Bus:ttyW34
[   19.428187] device: 'ttyW34': device_create_release
[   19.432161] device: 'ttyW35': device_unregister
[   19.436002] PM: Removing info for No Bus:ttyW35
[   19.440197] device: 'ttyW35': device_create_release
[   19.444164] device: 'ttyW36': device_unregister
[   19.448003] PM: Removing info for No Bus:ttyW36
[   19.452182] device: 'ttyW36': device_create_release
[   19.456173] device: 'ttyW37': device_unregister
[   19.460002] PM: Removing info for No Bus:ttyW37
[   19.464185] device: 'ttyW37': device_create_release
[   19.468161] device: 'ttyW38': device_unregister
[   19.472002] PM: Removing info for No Bus:ttyW38
[   19.476182] device: 'ttyW38': device_create_release
[   19.480176] device: 'ttyW39': device_unregister
[   19.484002] PM: Removing info for No Bus:ttyW39
[   19.488184] device: 'ttyW39': device_create_release
[   19.492159] device: 'ttyW40': device_unregister
[   19.496002] PM: Removing info for No Bus:ttyW40
[   19.500180] device: 'ttyW40': device_create_release
[   19.504159] device: 'ttyW41': device_unregister
[   19.508002] PM: Removing info for No Bus:ttyW41
[   19.512190] device: 'ttyW41': device_create_release
[   19.516163] device: 'ttyW42': device_unregister
[   19.520002] PM: Removing info for No Bus:ttyW42
[   19.524176] device: 'ttyW42': device_create_release
[   19.528160] device: 'ttyW43': device_unregister
[   19.532002] PM: Removing info for No Bus:ttyW43
[   19.536176] device: 'ttyW43': device_create_release
[   19.540160] device: 'ttyW44': device_unregister
[   19.544003] PM: Removing info for No Bus:ttyW44
[   19.548180] device: 'ttyW44': device_create_release
[   19.552160] device: 'ttyW45': device_unregister
[   19.556002] PM: Removing info for No Bus:ttyW45
[   19.560182] device: 'ttyW45': device_create_release
[   19.564160] device: 'ttyW46': device_unregister
[   19.568003] PM: Removing info for No Bus:ttyW46
[   19.572187] device: 'ttyW46': device_create_release
[   19.576160] device: 'ttyW47': device_unregister
[   19.580002] PM: Removing info for No Bus:ttyW47
[   19.584196] device: 'ttyW47': device_create_release
[   19.588163] device: 'ttyW48': device_unregister
[   19.592002] PM: Removing info for No Bus:ttyW48
[   19.596181] device: 'ttyW48': device_create_release
[   19.600161] device: 'ttyW49': device_unregister
[   19.604002] PM: Removing info for No Bus:ttyW49
[   19.608182] device: 'ttyW49': device_create_release
[   19.612173] device: 'ttyW50': device_unregister
[   19.616002] PM: Removing info for No Bus:ttyW50
[   19.620186] device: 'ttyW50': device_create_release
[   19.624161] device: 'ttyW51': device_unregister
[   19.628002] PM: Removing info for No Bus:ttyW51
[   19.632185] device: 'ttyW51': device_create_release
[   19.636161] device: 'ttyW52': device_unregister
[   19.640002] PM: Removing info for No Bus:ttyW52
[   19.644187] device: 'ttyW52': device_create_release
[   19.648162] device: 'ttyW53': device_unregister
[   19.652002] PM: Removing info for No Bus:ttyW53
[   19.656199] device: 'ttyW53': device_create_release
[   19.660164] device: 'ttyW54': device_unregister
[   19.664002] PM: Removing info for No Bus:ttyW54
[   19.668185] device: 'ttyW54': device_create_release
[   19.672162] device: 'ttyW55': device_unregister
[   19.676002] PM: Removing info for No Bus:ttyW55
[   19.680185] device: 'ttyW55': device_create_release
[   19.684162] device: 'ttyW56': device_unregister
[   19.688003] PM: Removing info for No Bus:ttyW56
[   19.692187] device: 'ttyW56': device_create_release
[   19.696178] device: 'ttyW57': device_unregister
[   19.700002] PM: Removing info for No Bus:ttyW57
[   19.704191] device: 'ttyW57': device_create_release
[   19.708162] device: 'ttyW58': device_unregister
[   19.712002] PM: Removing info for No Bus:ttyW58
[   19.716188] device: 'ttyW58': device_create_release
[   19.720163] device: 'ttyW59': device_unregister
[   19.724002] PM: Removing info for No Bus:ttyW59
[   19.728203] device: 'ttyW59': device_create_release
[   19.732165] device: 'ttyW60': device_unregister
[   19.736002] PM: Removing info for No Bus:ttyW60
[   19.740189] device: 'ttyW60': device_create_release
[   19.744176] device: 'ttyW61': device_unregister
[   19.748002] PM: Removing info for No Bus:ttyW61
[   19.752192] device: 'ttyW61': device_create_release
[   19.756165] device: 'ttyW62': device_unregister
[   19.760002] PM: Removing info for No Bus:ttyW62
[   19.764191] device: 'ttyW62': device_create_release
[   19.768178] device: 'ttyW63': device_unregister
[   19.772002] PM: Removing info for No Bus:ttyW63
[   19.776198] device: 'ttyW63': device_create_release
[   19.780018] sx: No specialix IO8+ boards detected.
[   19.784008] initcall specialix_init_module+0x0/0x386 returned -5 after 1296875 usecs
[   19.788004] initcall specialix_init_module+0x0/0x386 returned with error code -5 
[   19.792004] calling  ip2_loadmain+0x0/0x11c0 @ 1
[   19.796002] Computone IntelliPort Plus multiport driver version 1.2.14
[   19.800031] device class 'ip2': registering
[   19.804073] initcall ip2_loadmain+0x0/0x11c0 returned 0 after 7812 usecs
[   19.808005] calling  riscom8_init_module+0x0/0x3be @ 1
[   19.812002] rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996.
[   19.816026] device: 'ttyL0': device_add
[   19.820207] PM: Adding info for No Bus:ttyL0
[   19.824058] device: 'ttyL1': device_add
[   19.828153] PM: Adding info for No Bus:ttyL1
[   19.832056] device: 'ttyL2': device_add
[   19.836147] PM: Adding info for No Bus:ttyL2
[   19.840055] device: 'ttyL3': device_add
[   19.844144] PM: Adding info for No Bus:ttyL3
[   19.848057] device: 'ttyL4': device_add
[   19.852146] PM: Adding info for No Bus:ttyL4
[   19.856055] device: 'ttyL5': device_add
[   19.860146] PM: Adding info for No Bus:ttyL5
[   19.864056] device: 'ttyL6': device_add
[   19.868146] PM: Adding info for No Bus:ttyL6
[   19.872056] device: 'ttyL7': device_add
[   19.876147] PM: Adding info for No Bus:ttyL7
[   19.880056] device: 'ttyL8': device_add
[   19.884146] PM: Adding info for No Bus:ttyL8
[   19.888057] device: 'ttyL9': device_add
[   19.892147] PM: Adding info for No Bus:ttyL9
[   19.896056] device: 'ttyL10': device_add
[   19.900147] PM: Adding info for No Bus:ttyL10
[   19.904056] device: 'ttyL11': device_add
[   19.908164] PM: Adding info for No Bus:ttyL11
[   19.912058] device: 'ttyL12': device_add
[   19.916153] PM: Adding info for No Bus:ttyL12
[   19.920056] device: 'ttyL13': device_add
[   19.924148] PM: Adding info for No Bus:ttyL13
[   19.928057] device: 'ttyL14': device_add
[   19.932148] PM: Adding info for No Bus:ttyL14
[   19.936056] device: 'ttyL15': device_add
[   19.940147] PM: Adding info for No Bus:ttyL15
[   19.944056] device: 'ttyL16': device_add
[   19.948149] PM: Adding info for No Bus:ttyL16
[   19.952056] device: 'ttyL17': device_add
[   19.956163] PM: Adding info for No Bus:ttyL17
[   19.960057] device: 'ttyL18': device_add
[   19.964151] PM: Adding info for No Bus:ttyL18
[   19.968057] device: 'ttyL19': device_add
[   19.972160] PM: Adding info for No Bus:ttyL19
[   19.976058] device: 'ttyL20': device_add
[   19.980155] PM: Adding info for No Bus:ttyL20
[   19.984056] device: 'ttyL21': device_add
[   19.988147] PM: Adding info for No Bus:ttyL21
[   19.992064] device: 'ttyL22': device_add
[   19.996156] PM: Adding info for No Bus:ttyL22
[   20.000057] device: 'ttyL23': device_add
[   20.004166] PM: Adding info for No Bus:ttyL23
[   20.008059] device: 'ttyL24': device_add
[   20.012155] PM: Adding info for No Bus:ttyL24
[   20.016056] device: 'ttyL25': device_add
[   20.020151] PM: Adding info for No Bus:ttyL25
[   20.024056] device: 'ttyL26': device_add
[   20.028151] PM: Adding info for No Bus:ttyL26
[   20.032056] device: 'ttyL27': device_add
[   20.036150] PM: Adding info for No Bus:ttyL27
[   20.040056] device: 'ttyL28': device_add
[   20.044150] PM: Adding info for No Bus:ttyL28
[   20.048057] device: 'ttyL29': device_add
[   20.052166] PM: Adding info for No Bus:ttyL29
[   20.056061] device: 'ttyL30': device_add
[   20.060158] PM: Adding info for No Bus:ttyL30
[   20.064065] device: 'ttyL31': device_add
[   20.068156] PM: Adding info for No Bus:ttyL31
[   20.072075] rc0: RISCom/8 Board at 0x220 not found.
[   20.076030] rc1: RISCom/8 Board at 0x240 not found.
[   20.080029] rc2: RISCom/8 Board at 0x250 not found.
[   20.084029] rc3: RISCom/8 Board at 0x260 not found.
[   20.088222] device: 'ttyL0': device_unregister
[   20.092002] PM: Removing info for No Bus:ttyL0
[   20.096176] device: 'ttyL0': device_create_release
[   20.104049] device: 'ttyL1': device_unregister
[   20.108002] PM: Removing info for No Bus:ttyL1
[   20.112176] device: 'ttyL1': device_create_release
[   20.116158] device: 'ttyL2': device_unregister
[   20.120002] PM: Removing info for No Bus:ttyL2
[   20.124179] device: 'ttyL2': device_create_release
[   20.132073] device: 'ttyL3': device_unregister
[   20.136002] PM: Removing info for No Bus:ttyL3
[   20.140181] device: 'ttyL3': device_create_release
[   20.144158] device: 'ttyL4': device_unregister
[   20.148002] PM: Removing info for No Bus:ttyL4
[   20.152183] device: 'ttyL4': device_create_release
[   20.160108] device: 'ttyL5': device_unregister
[   20.164002] PM: Removing info for No Bus:ttyL5
[   20.168186] device: 'ttyL5': device_create_release
[   20.172159] device: 'ttyL6': device_unregister
[   20.176002] PM: Removing info for No Bus:ttyL6
[   20.180177] device: 'ttyL6': device_create_release
[   20.188143] device: 'ttyL7': device_unregister
[   20.192002] PM: Removing info for No Bus:ttyL7
[   20.196179] device: 'ttyL7': device_create_release
[   20.200160] device: 'ttyL8': device_unregister
[   20.204002] PM: Removing info for No Bus:ttyL8
[   20.208183] device: 'ttyL8': device_create_release
[   20.212160] device: 'ttyL9': device_unregister
[   20.216002] PM: Removing info for No Bus:ttyL9
[   20.220184] device: 'ttyL9': device_create_release
[   20.224161] device: 'ttyL10': device_unregister
[   20.228002] PM: Removing info for No Bus:ttyL10
[   20.232187] device: 'ttyL10': device_create_release
[   20.236161] device: 'ttyL11': device_unregister
[   20.240002] PM: Removing info for No Bus:ttyL11
[   20.244183] device: 'ttyL11': device_create_release
[   20.248163] device: 'ttyL12': device_unregister
[   20.252002] PM: Removing info for No Bus:ttyL12
[   20.260007] device: 'ttyL12': device_create_release
[   20.264161] device: 'ttyL13': device_unregister
[   20.268002] PM: Removing info for No Bus:ttyL13
[   20.272183] device: 'ttyL13': device_create_release
[   20.276162] device: 'ttyL14': device_unregister
[   20.280002] PM: Removing info for No Bus:ttyL14
[   20.284186] device: 'ttyL14': device_create_release
[   20.288163] device: 'ttyL15': device_unregister
[   20.292002] PM: Removing info for No Bus:ttyL15
[   20.296189] device: 'ttyL15': device_create_release
[   20.300162] device: 'ttyL16': device_unregister
[   20.304002] PM: Removing info for No Bus:ttyL16
[   20.308191] device: 'ttyL16': device_create_release
[   20.312165] device: 'ttyL17': device_unregister
[   20.316002] PM: Removing info for No Bus:ttyL17
[   20.320197] device: 'ttyL17': device_create_release
[   20.324167] device: 'ttyL18': device_unregister
[   20.328003] PM: Removing info for No Bus:ttyL18
[   20.332180] device: 'ttyL18': device_create_release
[   20.336160] device: 'ttyL19': device_unregister
[   20.340002] PM: Removing info for No Bus:ttyL19
[   20.348002] device: 'ttyL19': device_create_release
[   20.352158] device: 'ttyL20': device_unregister
[   20.356002] PM: Removing info for No Bus:ttyL20
[   20.360181] device: 'ttyL20': device_create_release
[   20.364159] device: 'ttyL21': device_unregister
[   20.368003] PM: Removing info for No Bus:ttyL21
[   20.372185] device: 'ttyL21': device_create_release
[   20.376161] device: 'ttyL22': device_unregister
[   20.380002] PM: Removing info for No Bus:ttyL22
[   20.384186] device: 'ttyL22': device_create_release
[   20.388161] device: 'ttyL23': device_unregister
[   20.392002] PM: Removing info for No Bus:ttyL23
[   20.396197] device: 'ttyL23': device_create_release
[   20.400163] device: 'ttyL24': device_unregister
[   20.404002] PM: Removing info for No Bus:ttyL24
[   20.408185] device: 'ttyL24': device_create_release
[   20.412161] device: 'ttyL25': device_unregister
[   20.416002] PM: Removing info for No Bus:ttyL25
[   20.420183] device: 'ttyL25': device_create_release
[   20.424160] device: 'ttyL26': device_unregister
[   20.428002] PM: Removing info for No Bus:ttyL26
[   20.432187] device: 'ttyL26': device_create_release
[   20.436160] device: 'ttyL27': device_unregister
[   20.440002] PM: Removing info for No Bus:ttyL27
[   20.444188] device: 'ttyL27': device_create_release
[   20.448161] device: 'ttyL28': device_unregister
[   20.452002] PM: Removing info for No Bus:ttyL28
[   20.456190] device: 'ttyL28': device_create_release
[   20.460160] device: 'ttyL29': device_unregister
[   20.464002] PM: Removing info for No Bus:ttyL29
[   20.468204] device: 'ttyL29': device_create_release
[   20.472163] device: 'ttyL30': device_unregister
[   20.476002] PM: Removing info for No Bus:ttyL30
[   20.480193] device: 'ttyL30': device_create_release
[   20.484161] device: 'ttyL31': device_unregister
[   20.488003] PM: Removing info for No Bus:ttyL31
[   20.492195] device: 'ttyL31': device_create_release
[   20.496018] rc: No RISCom/8 boards detected.
[   20.500008] initcall riscom8_init_module+0x0/0x3be returned -5 after 671875 usecs
[   20.504004] initcall riscom8_init_module+0x0/0x3be returned with error code -5 
[   20.508003] calling  isicom_init+0x0/0x1b2 @ 1
[   20.512025] bus: 'pci': add driver isicom
[   20.516074] initcall isicom_init+0x0/0x1b2 returned 0 after 3906 usecs
[   20.520005] calling  synclink_init+0x0/0x20c @ 1
[   20.524002] SyncLink serial driver $Revision: 4.38 $
[   20.528004] bus: 'pci': add driver synclink
[   20.532074] device: 'ttySL0': device_add
[   20.536198] PM: Adding info for No Bus:ttySL0
[   20.540057] device: 'ttySL1': device_add
[   20.544153] PM: Adding info for No Bus:ttySL1
[   20.548055] device: 'ttySL2': device_add
[   20.552147] PM: Adding info for No Bus:ttySL2
[   20.556056] device: 'ttySL3': device_add
[   20.560150] PM: Adding info for No Bus:ttySL3
[   20.564055] device: 'ttySL4': device_add
[   20.568156] PM: Adding info for No Bus:ttySL4
[   20.572056] device: 'ttySL5': device_add
[   20.576149] PM: Adding info for No Bus:ttySL5
[   20.580057] device: 'ttySL6': device_add
[   20.584149] PM: Adding info for No Bus:ttySL6
[   20.588056] device: 'ttySL7': device_add
[   20.592150] PM: Adding info for No Bus:ttySL7
[   20.596056] device: 'ttySL8': device_add
[   20.600148] PM: Adding info for No Bus:ttySL8
[   20.604057] device: 'ttySL9': device_add
[   20.608150] PM: Adding info for No Bus:ttySL9
[   20.612056] device: 'ttySL10': device_add
[   20.616152] PM: Adding info for No Bus:ttySL10
[   20.620056] device: 'ttySL11': device_add
[   20.624150] PM: Adding info for No Bus:ttySL11
[   20.628057] device: 'ttySL12': device_add
[   20.632151] PM: Adding info for No Bus:ttySL12
[   20.636056] device: 'ttySL13': device_add
[   20.640152] PM: Adding info for No Bus:ttySL13
[   20.644056] device: 'ttySL14': device_add
[   20.648151] PM: Adding info for No Bus:ttySL14
[   20.652056] device: 'ttySL15': device_add
[   20.656163] PM: Adding info for No Bus:ttySL15
[   20.660058] device: 'ttySL16': device_add
[   20.664161] PM: Adding info for No Bus:ttySL16
[   20.668056] device: 'ttySL17': device_add
[   20.672150] PM: Adding info for No Bus:ttySL17
[   20.676057] device: 'ttySL18': device_add
[   20.680153] PM: Adding info for No Bus:ttySL18
[   20.684056] device: 'ttySL19': device_add
[   20.688154] PM: Adding info for No Bus:ttySL19
[   20.692056] device: 'ttySL20': device_add
[   20.696151] PM: Adding info for No Bus:ttySL20
[   20.700057] device: 'ttySL21': device_add
[   20.704163] PM: Adding info for No Bus:ttySL21
[   20.708058] device: 'ttySL22': device_add
[   20.712162] PM: Adding info for No Bus:ttySL22
[   20.716056] device: 'ttySL23': device_add
[   20.720154] PM: Adding info for No Bus:ttySL23
[   20.724057] device: 'ttySL24': device_add
[   20.728156] PM: Adding info for No Bus:ttySL24
[   20.732056] device: 'ttySL25': device_add
[   20.736156] PM: Adding info for No Bus:ttySL25
[   20.740056] device: 'ttySL26': device_add
[   20.744153] PM: Adding info for No Bus:ttySL26
[   20.748057] device: 'ttySL27': device_add
[   20.752165] PM: Adding info for No Bus:ttySL27
[   20.756058] device: 'ttySL28': device_add
[   20.760167] PM: Adding info for No Bus:ttySL28
[   20.764056] device: 'ttySL29': device_add
[   20.768160] PM: Adding info for No Bus:ttySL29
[   20.772057] device: 'ttySL30': device_add
[   20.776158] PM: Adding info for No Bus:ttySL30
[   20.780055] device: 'ttySL31': device_add
[   20.784159] PM: Adding info for No Bus:ttySL31
[   20.788056] device: 'ttySL32': device_add
[   20.792158] PM: Adding info for No Bus:ttySL32
[   20.796056] device: 'ttySL33': device_add
[   20.800170] PM: Adding info for No Bus:ttySL33
[   20.804058] device: 'ttySL34': device_add
[   20.808169] PM: Adding info for No Bus:ttySL34
[   20.812056] device: 'ttySL35': device_add
[   20.816187] PM: Adding info for No Bus:ttySL35
[   20.820067] device: 'ttySL36': device_add
[   20.824175] PM: Adding info for No Bus:ttySL36
[   20.828057] device: 'ttySL37': device_add
[   20.832181] PM: Adding info for No Bus:ttySL37
[   20.836058] device: 'ttySL38': device_add
[   20.844038] PM: Adding info for No Bus:ttySL38
[   20.848056] device: 'ttySL39': device_add
[   20.852172] PM: Adding info for No Bus:ttySL39
[   20.856059] device: 'ttySL40': device_add
[   20.860169] PM: Adding info for No Bus:ttySL40
[   20.864056] device: 'ttySL41': device_add
[   20.868164] PM: Adding info for No Bus:ttySL41
[   20.872056] device: 'ttySL42': device_add
[   20.876162] PM: Adding info for No Bus:ttySL42
[   20.880057] device: 'ttySL43': device_add
[   20.884163] PM: Adding info for No Bus:ttySL43
[   20.888057] device: 'ttySL44': device_add
[   20.896083] PM: Adding info for No Bus:ttySL44
[   20.900056] device: 'ttySL45': device_add
[   20.904172] PM: Adding info for No Bus:ttySL45
[   20.908058] device: 'ttySL46': device_add
[   20.912171] PM: Adding info for No Bus:ttySL46
[   20.916057] device: 'ttySL47': device_add
[   20.920164] PM: Adding info for No Bus:ttySL47
[   20.924056] device: 'ttySL48': device_add
[   20.928167] PM: Adding info for No Bus:ttySL48
[   20.932065] device: 'ttySL49': device_add
[   20.936172] PM: Adding info for No Bus:ttySL49
[   20.940059] device: 'ttySL50': device_add
[   20.948151] PM: Adding info for No Bus:ttySL50
[   20.952057] device: 'ttySL51': device_add
[   20.956175] PM: Adding info for No Bus:ttySL51
[   20.960058] device: 'ttySL52': device_add
[   20.964174] PM: Adding info for No Bus:ttySL52
[   20.968058] device: 'ttySL53': device_add
[   20.972166] PM: Adding info for No Bus:ttySL53
[   20.976057] device: 'ttySL54': device_add
[   20.980165] PM: Adding info for No Bus:ttySL54
[   20.984056] device: 'ttySL55': device_add
[   20.988181] PM: Adding info for No Bus:ttySL55
[   20.992066] device: 'ttySL56': device_add
[   20.996181] PM: Adding info for No Bus:ttySL56
[   21.000059] device: 'ttySL57': device_add
[   21.004178] PM: Adding info for No Bus:ttySL57
[   21.008059] device: 'ttySL58': device_add
[   21.012177] PM: Adding info for No Bus:ttySL58
[   21.016056] device: 'ttySL59': device_add
[   21.020168] PM: Adding info for No Bus:ttySL59
[   21.024057] device: 'ttySL60': device_add
[   21.028167] PM: Adding info for No Bus:ttySL60
[   21.032056] device: 'ttySL61': device_add
[   21.036170] PM: Adding info for No Bus:ttySL61
[   21.040065] device: 'ttySL62': device_add
[   21.044176] PM: Adding info for No Bus:ttySL62
[   21.048060] device: 'ttySL63': device_add
[   21.052181] PM: Adding info for No Bus:ttySL63
[   21.056058] device: 'ttySL64': device_add
[   21.060180] PM: Adding info for No Bus:ttySL64
[   21.064056] device: 'ttySL65': device_add
[   21.068170] PM: Adding info for No Bus:ttySL65
[   21.072057] device: 'ttySL66': device_add
[   21.076173] PM: Adding info for No Bus:ttySL66
[   21.080058] device: 'ttySL67': device_add
[   21.084174] PM: Adding info for No Bus:ttySL67
[   21.088057] device: 'ttySL68': device_add
[   21.092174] PM: Adding info for No Bus:ttySL68
[   21.096057] device: 'ttySL69': device_add
[   21.100185] PM: Adding info for No Bus:ttySL69
[   21.104058] device: 'ttySL70': device_add
[   21.108186] PM: Adding info for No Bus:ttySL70
[   21.112056] device: 'ttySL71': device_add
[   21.116173] PM: Adding info for No Bus:ttySL71
[   21.120058] device: 'ttySL72': device_add
[   21.124174] PM: Adding info for No Bus:ttySL72
[   21.128057] device: 'ttySL73': device_add
[   21.132178] PM: Adding info for No Bus:ttySL73
[   21.136068] device: 'ttySL74': device_add
[   21.140183] PM: Adding info for No Bus:ttySL74
[   21.144067] device: 'ttySL75': device_add
[   21.148196] PM: Adding info for No Bus:ttySL75
[   21.152059] device: 'ttySL76': device_add
[   21.156187] PM: Adding info for No Bus:ttySL76
[   21.160057] device: 'ttySL77': device_add
[   21.164177] PM: Adding info for No Bus:ttySL77
[   21.168059] device: 'ttySL78': device_add
[   21.172181] PM: Adding info for No Bus:ttySL78
[   21.176056] device: 'ttySL79': device_add
[   21.184060] PM: Adding info for No Bus:ttySL79
[   21.188056] device: 'ttySL80': device_add
[   21.192179] PM: Adding info for No Bus:ttySL80
[   21.196057] device: 'ttySL81': device_add
[   21.200187] PM: Adding info for No Bus:ttySL81
[   21.204060] device: 'ttySL82': device_add
[   21.208188] PM: Adding info for No Bus:ttySL82
[   21.212056] device: 'ttySL83': device_add
[   21.216182] PM: Adding info for No Bus:ttySL83
[   21.220066] device: 'ttySL84': device_add
[   21.224189] PM: Adding info for No Bus:ttySL84
[   21.232037] device: 'ttySL85': device_add
[   21.236181] PM: Adding info for No Bus:ttySL85
[   21.240058] device: 'ttySL86': device_add
[   21.244181] PM: Adding info for No Bus:ttySL86
[   21.248058] device: 'ttySL87': device_add
[   21.252194] PM: Adding info for No Bus:ttySL87
[   21.256065] device: 'ttySL88': device_add
[   21.260191] PM: Adding info for No Bus:ttySL88
[   21.264059] device: 'ttySL89': device_add
[   21.268185] PM: Adding info for No Bus:ttySL89
[   21.272056] device: 'ttySL90': device_add
[   21.276187] PM: Adding info for No Bus:ttySL90
[   21.280057] device: 'ttySL91': device_add
[   21.284183] PM: Adding info for No Bus:ttySL91
[   21.288059] device: 'ttySL92': device_add
[   21.292204] PM: Adding info for No Bus:ttySL92
[   21.296059] device: 'ttySL93': device_add
[   21.300198] PM: Adding info for No Bus:ttySL93
[   21.304058] device: 'ttySL94': device_add
[   21.308220] PM: Adding info for No Bus:ttySL94
[   21.312058] device: 'ttySL95': device_add
[   21.316198] PM: Adding info for No Bus:ttySL95
[   21.320057] device: 'ttySL96': device_add
[   21.324188] PM: Adding info for No Bus:ttySL96
[   21.328058] device: 'ttySL97': device_add
[   21.332187] PM: Adding info for No Bus:ttySL97
[   21.336059] device: 'ttySL98': device_add
[   21.340187] PM: Adding info for No Bus:ttySL98
[   21.344056] device: 'ttySL99': device_add
[   21.348197] PM: Adding info for No Bus:ttySL99
[   21.352058] device: 'ttySL100': device_add
[   21.356194] PM: Adding info for No Bus:ttySL100
[   21.360067] device: 'ttySL101': device_add
[   21.364196] PM: Adding info for No Bus:ttySL101
[   21.368059] device: 'ttySL102': device_add
[   21.372191] PM: Adding info for No Bus:ttySL102
[   21.376056] device: 'ttySL103': device_add
[   21.380188] PM: Adding info for No Bus:ttySL103
[   21.384057] device: 'ttySL104': device_add
[   21.388188] PM: Adding info for No Bus:ttySL104
[   21.392056] device: 'ttySL105': device_add
[   21.396217] PM: Adding info for No Bus:ttySL105
[   21.400059] device: 'ttySL106': device_add
[   21.408129] PM: Adding info for No Bus:ttySL106
[   21.412056] device: 'ttySL107': device_add
[   21.416190] PM: Adding info for No Bus:ttySL107
[   21.420058] device: 'ttySL108': device_add
[   21.424190] PM: Adding info for No Bus:ttySL108
[   21.428056] device: 'ttySL109': device_add
[   21.432192] PM: Adding info for No Bus:ttySL109
[   21.436057] device: 'ttySL110': device_add
[   21.440190] PM: Adding info for No Bus:ttySL110
[   21.444058] device: 'ttySL111': device_add
[   21.448202] PM: Adding info for No Bus:ttySL111
[   21.452066] device: 'ttySL112': device_add
[   21.456202] PM: Adding info for No Bus:ttySL112
[   21.460057] device: 'ttySL113': device_add
[   21.464191] PM: Adding info for No Bus:ttySL113
[   21.468066] device: 'ttySL114': device_add
[   21.472200] PM: Adding info for No Bus:ttySL114
[   21.476058] device: 'ttySL115': device_add
[   21.484038] PM: Adding info for No Bus:ttySL115
[   21.488057] device: 'ttySL116': device_add
[   21.492193] PM: Adding info for No Bus:ttySL116
[   21.496056] device: 'ttySL117': device_add
[   21.500202] PM: Adding info for No Bus:ttySL117
[   21.504060] device: 'ttySL118': device_add
[   21.508201] PM: Adding info for No Bus:ttySL118
[   21.512056] device: 'ttySL119': device_add
[   21.516195] PM: Adding info for No Bus:ttySL119
[   21.520057] device: 'ttySL120': device_add
[   21.524193] PM: Adding info for No Bus:ttySL120
[   21.528059] device: 'ttySL121': device_add
[   21.532212] PM: Adding info for No Bus:ttySL121
[   21.536058] device: 'ttySL122': device_add
[   21.540200] PM: Adding info for No Bus:ttySL122
[   21.544057] device: 'ttySL123': device_add
[   21.548205] PM: Adding info for No Bus:ttySL123
[   21.552060] device: 'ttySL124': device_add
[   21.556202] PM: Adding info for No Bus:ttySL124
[   21.560056] device: 'ttySL125': device_add
[   21.564198] PM: Adding info for No Bus:ttySL125
[   21.568058] device: 'ttySL126': device_add
[   21.572208] PM: Adding info for No Bus:ttySL126
[   21.576067] device: 'ttySL127': device_add
[   21.580208] PM: Adding info for No Bus:ttySL127
[   21.584060] SyncLink serial driver $Revision: 4.38 $, tty major#252
[   21.588008] initcall synclink_init+0x0/0x20c returned 0 after 1039062 usecs
[   21.592005] calling  synclinkmp_init+0x0/0x150 @ 1
[   21.596002] SyncLink MultiPort driver $Revision: 4.38 $
[   21.600006] bus: 'pci': add driver synclinkmp
[   21.604105] device: 'ttySLM0': device_add
[   21.608242] PM: Adding info for No Bus:ttySLM0
[   21.612062] device: 'ttySLM1': device_add
[   21.616207] PM: Adding info for No Bus:ttySLM1
[   21.620057] device: 'ttySLM2': device_add
[   21.624198] PM: Adding info for No Bus:ttySLM2
[   21.628057] device: 'ttySLM3': device_add
[   21.632193] PM: Adding info for No Bus:ttySLM3
[   21.636058] device: 'ttySLM4': device_add
[   21.640195] PM: Adding info for No Bus:ttySLM4
[   21.644057] device: 'ttySLM5': device_add
[   21.648198] PM: Adding info for No Bus:ttySLM5
[   21.652057] device: 'ttySLM6': device_add
[   21.656210] PM: Adding info for No Bus:ttySLM6
[   21.660060] device: 'ttySLM7': device_add
[   21.668179] PM: Adding info for No Bus:ttySLM7
[   21.672058] device: 'ttySLM8': device_add
[   21.676197] PM: Adding info for No Bus:ttySLM8
[   21.680057] device: 'ttySLM9': device_add
[   21.684198] PM: Adding info for No Bus:ttySLM9
[   21.688068] device: 'ttySLM10': device_add
[   21.692205] PM: Adding info for No Bus:ttySLM10
[   21.696060] device: 'ttySLM11': device_add
[   21.700198] PM: Adding info for No Bus:ttySLM11
[   21.704065] device: 'ttySLM12': device_add
[   21.712190] PM: Adding info for No Bus:ttySLM12
[   21.716059] device: 'ttySLM13': device_add
[   21.720208] PM: Adding info for No Bus:ttySLM13
[   21.724057] device: 'ttySLM14': device_add
[   21.728201] PM: Adding info for No Bus:ttySLM14
[   21.732058] device: 'ttySLM15': device_add
[   21.736200] PM: Adding info for No Bus:ttySLM15
[   21.740057] device: 'ttySLM16': device_add
[   21.744200] PM: Adding info for No Bus:ttySLM16
[   21.748056] device: 'ttySLM17': device_add
[   21.752199] PM: Adding info for No Bus:ttySLM17
[   21.756058] device: 'ttySLM18': device_add
[   21.760209] PM: Adding info for No Bus:ttySLM18
[   21.764058] device: 'ttySLM19': device_add
[   21.768224] PM: Adding info for No Bus:ttySLM19
[   21.772059] device: 'ttySLM20': device_add
[   21.776209] PM: Adding info for No Bus:ttySLM20
[   21.780058] device: 'ttySLM21': device_add
[   21.784203] PM: Adding info for No Bus:ttySLM21
[   21.788057] device: 'ttySLM22': device_add
[   21.792202] PM: Adding info for No Bus:ttySLM22
[   21.796057] device: 'ttySLM23': device_add
[   21.800201] PM: Adding info for No Bus:ttySLM23
[   21.804058] device: 'ttySLM24': device_add
[   21.808216] PM: Adding info for No Bus:ttySLM24
[   21.812066] device: 'ttySLM25': device_add
[   21.816238] PM: Adding info for No Bus:ttySLM25
[   21.820071] device: 'ttySLM26': device_add
[   21.824214] PM: Adding info for No Bus:ttySLM26
[   21.828060] device: 'ttySLM27': device_add
[   21.832204] PM: Adding info for No Bus:ttySLM27
[   21.836057] device: 'ttySLM28': device_add
[   21.840204] PM: Adding info for No Bus:ttySLM28
[   21.844057] device: 'ttySLM29': device_add
[   21.848209] PM: Adding info for No Bus:ttySLM29
[   21.852058] device: 'ttySLM30': device_add
[   21.856214] PM: Adding info for No Bus:ttySLM30
[   21.860059] device: 'ttySLM31': device_add
[   21.864216] PM: Adding info for No Bus:ttySLM31
[   21.868057] device: 'ttySLM32': device_add
[   21.872206] PM: Adding info for No Bus:ttySLM32
[   21.876058] device: 'ttySLM33': device_add
[   21.880205] PM: Adding info for No Bus:ttySLM33
[   21.884057] device: 'ttySLM34': device_add
[   21.888208] PM: Adding info for No Bus:ttySLM34
[   21.892057] device: 'ttySLM35': device_add
[   21.896204] PM: Adding info for No Bus:ttySLM35
[   21.900058] device: 'ttySLM36': device_add
[   21.904216] PM: Adding info for No Bus:ttySLM36
[   21.908059] device: 'ttySLM37': device_add
[   21.912215] PM: Adding info for No Bus:ttySLM37
[   21.916073] device: 'ttySLM38': device_add
[   21.920218] PM: Adding info for No Bus:ttySLM38
[   21.924060] device: 'ttySLM39': device_add
[   21.928209] PM: Adding info for No Bus:ttySLM39
[   21.932057] device: 'ttySLM40': device_add
[   21.936207] PM: Adding info for No Bus:ttySLM40
[   21.940057] device: 'ttySLM41': device_add
[   21.944206] PM: Adding info for No Bus:ttySLM41
[   21.948058] device: 'ttySLM42': device_add
[   21.952216] PM: Adding info for No Bus:ttySLM42
[   21.956059] device: 'ttySLM43': device_add
[   21.960216] PM: Adding info for No Bus:ttySLM43
[   21.964057] device: 'ttySLM44': device_add
[   21.968209] PM: Adding info for No Bus:ttySLM44
[   21.972059] device: 'ttySLM45': device_add
[   21.976207] PM: Adding info for No Bus:ttySLM45
[   21.980057] device: 'ttySLM46': device_add
[   21.984208] PM: Adding info for No Bus:ttySLM46
[   21.988057] device: 'ttySLM47': device_add
[   21.992228] PM: Adding info for No Bus:ttySLM47
[   22.000057] device: 'ttySLM48': device_add
[   22.004221] PM: Adding info for No Bus:ttySLM48
[   22.008062] device: 'ttySLM49': device_add
[   22.012218] PM: Adding info for No Bus:ttySLM49
[   22.016057] device: 'ttySLM50': device_add
[   22.020210] PM: Adding info for No Bus:ttySLM50
[   22.024066] device: 'ttySLM51': device_add
[   22.028218] PM: Adding info for No Bus:ttySLM51
[   22.032060] device: 'ttySLM52': device_add
[   22.036209] PM: Adding info for No Bus:ttySLM52
[   22.040057] device: 'ttySLM53': device_add
[   22.044210] PM: Adding info for No Bus:ttySLM53
[   22.048059] device: 'ttySLM54': device_add
[   22.052221] PM: Adding info for No Bus:ttySLM54
[   22.056061] device: 'ttySLM55': device_add
[   22.060220] PM: Adding info for No Bus:ttySLM55
[   22.064057] device: 'ttySLM56': device_add
[   22.068233] PM: Adding info for No Bus:ttySLM56
[   22.072059] device: 'ttySLM57': device_add
[   22.076216] PM: Adding info for No Bus:ttySLM57
[   22.080059] device: 'ttySLM58': device_add
[   22.084211] PM: Adding info for No Bus:ttySLM58
[   22.088059] device: 'ttySLM59': device_add
[   22.092213] PM: Adding info for No Bus:ttySLM59
[   22.096057] device: 'ttySLM60': device_add
[   22.100222] PM: Adding info for No Bus:ttySLM60
[   22.104063] device: 'ttySLM61': device_add
[   22.112116] PM: Adding info for No Bus:ttySLM61
[   22.116058] device: 'ttySLM62': device_add
[   22.120213] PM: Adding info for No Bus:ttySLM62
[   22.124058] device: 'ttySLM63': device_add
[   22.128216] PM: Adding info for No Bus:ttySLM63
[   22.132067] device: 'ttySLM64': device_add
[   22.136223] PM: Adding info for No Bus:ttySLM64
[   22.140060] device: 'ttySLM65': device_add
[   22.144217] PM: Adding info for No Bus:ttySLM65
[   22.148067] device: 'ttySLM66': device_add
[   22.152236] PM: Adding info for No Bus:ttySLM66
[   22.156060] device: 'ttySLM67': device_add
[   22.160227] PM: Adding info for No Bus:ttySLM67
[   22.164059] device: 'ttySLM68': device_add
[   22.168231] PM: Adding info for No Bus:ttySLM68
[   22.172059] device: 'ttySLM69': device_add
[   22.176228] PM: Adding info for No Bus:ttySLM69
[   22.184007] device: 'ttySLM70': device_add
[   22.188220] PM: Adding info for No Bus:ttySLM70
[   22.192057] device: 'ttySLM71': device_add
[   22.196217] PM: Adding info for No Bus:ttySLM71
[   22.200059] device: 'ttySLM72': device_add
[   22.204230] PM: Adding info for No Bus:ttySLM72
[   22.208061] device: 'ttySLM73': device_add
[   22.212231] PM: Adding info for No Bus:ttySLM73
[   22.216058] device: 'ttySLM74': device_add
[   22.220218] PM: Adding info for No Bus:ttySLM74
[   22.224059] device: 'ttySLM75': device_add
[   22.228219] PM: Adding info for No Bus:ttySLM75
[   22.232058] device: 'ttySLM76': device_add
[   22.236220] PM: Adding info for No Bus:ttySLM76
[   22.240067] device: 'ttySLM77': device_add
[   22.244229] PM: Adding info for No Bus:ttySLM77
[   22.248062] device: 'ttySLM78': device_add
[   22.252235] PM: Adding info for No Bus:ttySLM78
[   22.256059] device: 'ttySLM79': device_add
[   22.260233] PM: Adding info for No Bus:ttySLM79
[   22.264058] device: 'ttySLM80': device_add
[   22.268221] PM: Adding info for No Bus:ttySLM80
[   22.272059] device: 'ttySLM81': device_add
[   22.276221] PM: Adding info for No Bus:ttySLM81
[   22.280058] device: 'ttySLM82': device_add
[   22.284223] PM: Adding info for No Bus:ttySLM82
[   22.288060] device: 'ttySLM83': device_add
[   22.296138] PM: Adding info for No Bus:ttySLM83
[   22.300058] device: 'ttySLM84': device_add
[   22.304232] PM: Adding info for No Bus:ttySLM84
[   22.308061] device: 'ttySLM85': device_add
[   22.312233] PM: Adding info for No Bus:ttySLM85
[   22.316058] device: 'ttySLM86': device_add
[   22.320225] PM: Adding info for No Bus:ttySLM86
[   22.324058] device: 'ttySLM87': device_add
[   22.328225] PM: Adding info for No Bus:ttySLM87
[   22.332059] device: 'ttySLM88': device_add
[   22.336226] PM: Adding info for No Bus:ttySLM88
[   22.340058] device: 'ttySLM89': device_add
[   22.344226] PM: Adding info for No Bus:ttySLM89
[   22.348077] device: 'ttySLM90': device_add
[   22.352247] PM: Adding info for No Bus:ttySLM90
[   22.356062] device: 'ttySLM91': device_add
[   22.360241] PM: Adding info for No Bus:ttySLM91
[   22.364058] device: 'ttySLM92': device_add
[   22.368247] PM: Adding info for No Bus:ttySLM92
[   22.372060] device: 'ttySLM93': device_add
[   22.376238] PM: Adding info for No Bus:ttySLM93
[   22.380069] device: 'ttySLM94': device_add
[   22.384239] PM: Adding info for No Bus:ttySLM94
[   22.388059] device: 'ttySLM95': device_add
[   22.392230] PM: Adding info for No Bus:ttySLM95
[   22.396058] device: 'ttySLM96': device_add
[   22.404109] PM: Adding info for No Bus:ttySLM96
[   22.408060] device: 'ttySLM97': device_add
[   22.412239] PM: Adding info for No Bus:ttySLM97
[   22.416059] device: 'ttySLM98': device_add
[   22.420232] PM: Adding info for No Bus:ttySLM98
[   22.424058] device: 'ttySLM99': device_add
[   22.428232] PM: Adding info for No Bus:ttySLM99
[   22.432058] device: 'ttySLM100': device_add
[   22.436231] PM: Adding info for No Bus:ttySLM100
[   22.440059] device: 'ttySLM101': device_add
[   22.444232] PM: Adding info for No Bus:ttySLM101
[   22.448059] device: 'ttySLM102': device_add
[   22.452244] PM: Adding info for No Bus:ttySLM102
[   22.456067] device: 'ttySLM103': device_add
[   22.460244] PM: Adding info for No Bus:ttySLM103
[   22.464060] device: 'ttySLM104': device_add
[   22.468235] PM: Adding info for No Bus:ttySLM104
[   22.472058] device: 'ttySLM105': device_add
[   22.476235] PM: Adding info for No Bus:ttySLM105
[   22.480058] device: 'ttySLM106': device_add
[   22.484253] PM: Adding info for No Bus:ttySLM106
[   22.488060] device: 'ttySLM107': device_add
[   22.492247] PM: Adding info for No Bus:ttySLM107
[   22.496058] device: 'ttySLM108': device_add
[   22.500256] PM: Adding info for No Bus:ttySLM108
[   22.504060] device: 'ttySLM109': device_add
[   22.508244] PM: Adding info for No Bus:ttySLM109
[   22.512059] device: 'ttySLM110': device_add
[   22.516236] PM: Adding info for No Bus:ttySLM110
[   22.520058] device: 'ttySLM111': device_add
[   22.524256] PM: Adding info for No Bus:ttySLM111
[   22.528061] device: 'ttySLM112': device_add
[   22.532240] PM: Adding info for No Bus:ttySLM112
[   22.536059] device: 'ttySLM113': device_add
[   22.540237] PM: Adding info for No Bus:ttySLM113
[   22.544058] device: 'ttySLM114': device_add
[   22.548248] PM: Adding info for No Bus:ttySLM114
[   22.552060] device: 'ttySLM115': device_add
[   22.556247] PM: Adding info for No Bus:ttySLM115
[   22.560068] device: 'ttySLM116': device_add
[   22.564248] PM: Adding info for No Bus:ttySLM116
[   22.568060] device: 'ttySLM117': device_add
[   22.572240] PM: Adding info for No Bus:ttySLM117
[   22.576057] device: 'ttySLM118': device_add
[   22.580239] PM: Adding info for No Bus:ttySLM118
[   22.584059] device: 'ttySLM119': device_add
[   22.588238] PM: Adding info for No Bus:ttySLM119
[   22.592058] device: 'ttySLM120': device_add
[   22.596251] PM: Adding info for No Bus:ttySLM120
[   22.600060] device: 'ttySLM121': device_add
[   22.604248] PM: Adding info for No Bus:ttySLM121
[   22.608071] device: 'ttySLM122': device_add
[   22.616129] PM: Adding info for No Bus:ttySLM122
[   22.620060] device: 'ttySLM123': device_add
[   22.624242] PM: Adding info for No Bus:ttySLM123
[   22.628058] device: 'ttySLM124': device_add
[   22.632244] PM: Adding info for No Bus:ttySLM124
[   22.636058] device: 'ttySLM125': device_add
[   22.640241] PM: Adding info for No Bus:ttySLM125
[   22.644059] device: 'ttySLM126': device_add
[   22.648254] PM: Adding info for No Bus:ttySLM126
[   22.652060] device: 'ttySLM127': device_add
[   22.656252] PM: Adding info for No Bus:ttySLM127
[   22.660061] SyncLink MultiPort driver $Revision: 4.38 $, tty major#251
[   22.664006] initcall synclinkmp_init+0x0/0x150 returned 0 after 1042968 usecs
[   22.668004] calling  slgt_init+0x0/0x168 @ 1
[   22.672002] SyncLink GT
[   22.674463] SyncLink GT, tty major#250
[   22.676006] bus: 'pci': add driver synclink_gt
[   22.680069] SyncLink GT no devices found
[   22.684003] initcall slgt_init+0x0/0x168 returned 0 after 11718 usecs
[   22.688004] calling  n_hdlc_init+0x0/0x81 @ 1
[   22.692002] HDLC line discipline maxframe=4096
[   22.696002] N_HDLC line discipline registered.
[   22.700003] initcall n_hdlc_init+0x0/0x81 returned 0 after 7812 usecs
[   22.704003] calling  gsm_init+0x0/0x11b @ 1
[   22.708016] gsm_init: loaded as 249,0.
[   22.712003] initcall gsm_init+0x0/0x11b returned 0 after 3906 usecs
[   22.716003] calling  raw_init+0x0/0xc7 @ 1
[   22.720006] device class 'raw': registering
[   22.724078] device: 'rawctl': device_add
[   22.728089] PM: Adding info for No Bus:rawctl
[   22.736035] initcall raw_init+0x0/0xc7 returned 0 after 15625 usecs
[   22.740004] calling  lp_init_module+0x0/0x1f4 @ 1
[   22.744010] device class 'printer': registering
[   22.748051] lp: driver loaded but no devices found
[   22.752004] initcall lp_init_module+0x0/0x1f4 returned 0 after 7812 usecs
[   22.756003] calling  dtlk_init+0x0/0x1c5 @ 1
[   22.760025] DoubleTalk PC - not found
[   22.764013] initcall dtlk_init+0x0/0x1c5 returned -19 after 3906 usecs
[   22.768003] calling  r3964_init+0x0/0x38 @ 1
[   22.772001] r3964: Philips r3964 Driver $Revision: 1.10 $
[   22.776003] initcall r3964_init+0x0/0x38 returned 0 after 3906 usecs
[   22.780002] calling  applicom_init+0x0/0x439 @ 1
[   22.784002] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[   22.788008] ac.o: No PCI boards found.
[   22.792002] ac.o: For an ISA board you must supply memory and irq parameters.
[   22.796003] initcall applicom_init+0x0/0x439 returned -6 after 11718 usecs
[   22.800003] initcall applicom_init+0x0/0x439 returned with error code -6 
[   22.804002] calling  sonypi_init+0x0/0x79 @ 1
[   22.808002] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   22.812005] initcall sonypi_init+0x0/0x79 returned -19 after 3906 usecs
[   22.816008] calling  nvram_init+0x0/0x70 @ 1
[   22.820015] device: 'nvram': device_add
[   22.824086] PM: Adding info for No Bus:nvram
[   22.828061] Non-volatile memory driver v1.3
[   22.832004] initcall nvram_init+0x0/0x70 returned 0 after 11718 usecs
[   22.836003] calling  ppdev_init+0x0/0xac @ 1
[   22.840007] device class 'ppdev': registering
[   22.844052] ppdev: user-space parallel port driver
[   22.848005] initcall ppdev_init+0x0/0xac returned 0 after 7812 usecs
[   22.852003] calling  scx200_gpio_init+0x0/0x115 @ 1
[   22.856002] scx200_gpio: no SCx200 gpio present
[   22.860003] initcall scx200_gpio_init+0x0/0x115 returned -19 after 3906 usecs
[   22.864003] calling  pc8736x_gpio_init+0x0/0x3b7 @ 1
[   22.868007] Registering platform device 'pc8736x_gpio.0'. Parent at platform
[   22.872005] device: 'pc8736x_gpio.0': device_add
[   22.876007] bus: 'platform': add device pc8736x_gpio.0
[   22.880014] PM: Adding info for platform:pc8736x_gpio.0
[   22.884058] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[   22.888009] platform pc8736x_gpio.0: no device found
[   22.892002] PM: Removing info for platform:pc8736x_gpio.0
[   22.896023] bus: 'platform': remove device pc8736x_gpio.0
[   22.900057] initcall pc8736x_gpio_init+0x0/0x3b7 returned -19 after 31250 usecs
[   22.908003] calling  nsc_gpio_init+0x0/0x11 @ 1
[   22.912001] nsc_gpio initializing
[   22.915318] initcall nsc_gpio_init+0x0/0x11 returned 0 after 0 usecs
[   22.916003] calling  cs5535_gpio_init+0x0/0x13f @ 1
[   22.920007] cs5535_gpio: DIVIL not found
[   22.924003] initcall cs5535_gpio_init+0x0/0x13f returned -19 after 3906 usecs
[   22.928003] calling  hangcheck_init+0x0/0x9d @ 1
[   22.932003] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[   22.936001] Hangcheck: Using getrawmonotonic().
[   22.940005] initcall hangcheck_init+0x0/0x9d returned 0 after 7812 usecs
[   22.944003] calling  init_tis+0x0/0x81 @ 1
[   22.948003] bus: 'pnp': add driver tpm_tis
[   22.952057] initcall init_tis+0x0/0x81 returned 0 after 3906 usecs
[   22.956003] calling  init_nsc+0x0/0x632 @ 1
[   22.960014] initcall init_nsc+0x0/0x632 returned -19 after 0 usecs
[   22.964002] calling  init_atmel+0x0/0x15f @ 1
[   22.968005] bus: 'platform': add driver tpm_atmel
[   22.972067] bus: 'platform': remove driver tpm_atmel
[   22.976048] driver: 'tpm_atmel': driver_release
[   22.980006] initcall init_atmel+0x0/0x15f returned -19 after 11718 usecs
[   22.984003] calling  init_inf+0x0/0xf @ 1
[   22.988002] bus: 'pnp': add driver tpm_inf_pnp
[   22.992054] initcall init_inf+0x0/0xf returned 0 after 3906 usecs
[   22.996003] calling  ramoops_init+0x0/0xed @ 1
[   23.000001] ramoops: invalid size specificationinitcall ramoops_init+0x0/0xed returned -22 after 3906 usecs
[   23.008004] initcall ramoops_init+0x0/0xed returned with error code -22 
[   23.012002] calling  drm_core_init+0x0/0xfb @ 1
[   23.016017] device class 'drm': registering
[   23.020077] [drm] Initialized drm 1.1.0 20060810
[   23.024004] initcall drm_core_init+0x0/0xfb returned 0 after 7812 usecs
[   23.028003] calling  ttm_init+0x0/0x64 @ 1
[   23.032005] device: 'ttm': device_add
[   23.036020] PM: Adding info for No Bus:ttm
[   23.040048] initcall ttm_init+0x0/0x64 returned 0 after 7812 usecs
[   23.044003] calling  tdfx_init+0x0/0xf @ 1
[   23.048028] initcall tdfx_init+0x0/0xf returned 0 after 0 usecs
[   23.052003] calling  r128_init+0x0/0x19 @ 1
[   23.056135] initcall r128_init+0x0/0x19 returned 0 after 0 usecs
[   23.060003] calling  radeon_init+0x0/0xae @ 1
[   23.064003] [drm] radeon defaulting to userspace modesetting.
[   23.068463] IOAPIC[0]: Set routing entry (2-5 -> 0x41 -> IRQ 31 Mode:1 Active:1)
[   23.072006] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 31
[   23.076012] pci 0000:01:00.0: setting latency timer to 64
[   23.080142] device: 'card0': device_add
[   23.084138] PM: Adding info for No Bus:card0
[   23.088146] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[   23.092864] initcall radeon_init+0x0/0xae returned 0 after 27343 usecs
[   23.096003] calling  mga_init+0x0/0x19 @ 1
[   23.100016] initcall mga_init+0x0/0x19 returned 0 after 0 usecs
[   23.104003] calling  savage_init+0x0/0x19 @ 1
[   23.108069] initcall savage_init+0x0/0x19 returned 0 after 0 usecs
[   23.112003] calling  via_init+0x0/0x1e @ 1
[   23.116032] initcall via_init+0x0/0x1e returned 0 after 0 usecs
[   23.120003] calling  serial8250_init+0x0/0x14b @ 1
[   23.124003] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   23.128037] Registering platform device 'serial8250'. Parent at platform
[   23.132003] device: 'serial8250': device_add
[   23.136007] bus: 'platform': add device serial8250
[   23.140013] PM: Adding info for platform:serial8250
[   23.144121] async_waiting @ 1
[   23.148003] async_continuing @ 1 after 0 usec
[   23.280258] async_waiting @ 1
[   23.283228] async_continuing @ 1 after 0 usec
[   23.412298] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   23.416008] device: 'ttyS0': device_add
[   23.420417] PM: Adding info for No Bus:ttyS0
[   23.424090] device: 'ttyS1': device_add
[   23.428269] PM: Adding info for No Bus:ttyS1
[   23.432077] device: 'ttyS2': device_add
[   23.436272] PM: Adding info for No Bus:ttyS2
[   23.440084] device: 'ttyS3': device_add
[   23.444256] PM: Adding info for No Bus:ttyS3
[   23.448067] bus: 'platform': add driver serial8250
[   23.452014] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
[   23.456002] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[   23.460008] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[   23.464002] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[   23.468058] initcall serial8250_init+0x0/0x14b returned 0 after 335937 usecs
[   23.472004] calling  serial8250_pnp_init+0x0/0xf @ 1
[   23.476003] bus: 'pnp': add driver serial
[   23.480057] initcall serial8250_pnp_init+0x0/0xf returned 0 after 3906 usecs
[   23.484004] calling  jsm_init_module+0x0/0x3a @ 1
[   23.488067] bus: 'pci': add driver jsm
[   23.492082] initcall jsm_init_module+0x0/0x3a returned 0 after 3906 usecs
[   23.496004] calling  timbuart_init+0x0/0xf @ 1
[   23.500004] bus: 'platform': add driver timb-uart
[   23.504056] initcall timbuart_init+0x0/0xf returned 0 after 3906 usecs
[   23.508004] calling  parport_default_proc_register+0x0/0x7 @ 1
[   23.512003] initcall parport_default_proc_register+0x0/0x7 returned 0 after 0 usecs
[   23.516003] calling  parport_ax88796_init+0x0/0xf @ 1
[   23.520003] bus: 'platform': add driver ax88796-pp
[   23.524056] initcall parport_ax88796_init+0x0/0xf returned 0 after 3906 usecs
[   23.528004] calling  isa_bus_init+0x0/0x33 @ 1
[   23.532074] bus: 'isa': registered
[   23.536005] device: 'isa': device_add
[   23.540009] PM: Adding info for No Bus:isa
[   23.544005] initcall isa_bus_init+0x0/0x33 returned 0 after 11718 usecs
[   23.548004] calling  topology_sysfs_init+0x0/0x5e @ 1
[   23.552027] initcall topology_sysfs_init+0x0/0x5e returned 0 after 0 usecs
[   23.556003] calling  brd_init+0x0/0x14e @ 1
[   23.560368] device: 'ram0': device_add
[   23.564033] PM: Adding info for No Bus:ram0
[   23.568113] device: '1:0': device_add
[   23.572015] PM: Adding info for No Bus:1:0
[   23.576073] device: 'ram1': device_add
[   23.580039] PM: Adding info for No Bus:ram1
[   23.584088] device: '1:1': device_add
[   23.588014] PM: Adding info for No Bus:1:1
[   23.592072] device: 'ram2': device_add
[   23.596038] PM: Adding info for No Bus:ram2
[   23.600097] device: '1:2': device_add
[   23.604024] PM: Adding info for No Bus:1:2
[   23.608063] device: 'ram3': device_add
[   23.612029] PM: Adding info for No Bus:ram3
[   23.616095] device: '1:3': device_add
[   23.620014] PM: Adding info for No Bus:1:3
[   23.624069] device: 'ram4': device_add
[   23.628031] PM: Adding info for No Bus:ram4
[   23.632096] device: '1:4': device_add
[   23.636014] PM: Adding info for No Bus:1:4
[   23.640074] device: 'ram5': device_add
[   23.644030] PM: Adding info for No Bus:ram5
[   23.648107] device: '1:5': device_add
[   23.652015] PM: Adding info for No Bus:1:5
[   23.656076] device: 'ram6': device_add
[   23.660039] PM: Adding info for No Bus:ram6
[   23.664088] device: '1:6': device_add
[   23.668017] PM: Adding info for No Bus:1:6
[   23.672060] device: 'ram7': device_add
[   23.676039] PM: Adding info for No Bus:ram7
[   23.680087] device: '1:7': device_add
[   23.684014] PM: Adding info for No Bus:1:7
[   23.688070] device: 'ram8': device_add
[   23.692027] PM: Adding info for No Bus:ram8
[   23.696087] device: '1:8': device_add
[   23.699763] PM: Adding info for No Bus:1:8
[   23.700062] device: 'ram9': device_add
[   23.703837] PM: Adding info for No Bus:ram9
[   23.704095] device: '1:9': device_add
[   23.707761] PM: Adding info for No Bus:1:9
[   23.712018] device: 'ram10': device_add
[   23.715878] PM: Adding info for No Bus:ram10
[   23.716104] device: '1:10': device_add
[   23.720015] PM: Adding info for No Bus:1:10
[   23.724069] device: 'ram11': device_add
[   23.728040] PM: Adding info for No Bus:ram11
[   23.732087] device: '1:11': device_add
[   23.736015] PM: Adding info for No Bus:1:11
[   23.740060] device: 'ram12': device_add
[   23.744039] PM: Adding info for No Bus:ram12
[   23.748088] device: '1:12': device_add
[   23.752014] PM: Adding info for No Bus:1:12
[   23.756059] device: 'ram13': device_add
[   23.760040] PM: Adding info for No Bus:ram13
[   23.764087] device: '1:13': device_add
[   23.768024] PM: Adding info for No Bus:1:13
[   23.772072] device: 'ram14': device_add
[   23.776066] PM: Adding info for No Bus:ram14
[   23.780103] device: '1:14': device_add
[   23.784015] PM: Adding info for No Bus:1:14
[   23.788069] device: 'ram15': device_add
[   23.792031] PM: Adding info for No Bus:ram15
[   23.796102] device: '1:15': device_add
[   23.800015] PM: Adding info for No Bus:1:15
[   23.804093] brd: module loaded
[   23.808006] initcall brd_init+0x0/0x14e returned 0 after 242187 usecs
[   23.812003] calling  loop_init+0x0/0x167 @ 1
[   23.816242] device: 'loop0': device_add
[   23.820031] PM: Adding info for No Bus:loop0
[   23.824095] device: '7:0': device_add
[   23.828014] PM: Adding info for No Bus:7:0
[   23.832061] device: 'loop1': device_add
[   23.836038] PM: Adding info for No Bus:loop1
[   23.840085] device: '7:1': device_add
[   23.844015] PM: Adding info for No Bus:7:1
[   23.848067] device: 'loop2': device_add
[   23.852040] PM: Adding info for No Bus:loop2
[   23.856086] device: '7:2': device_add
[   23.860023] PM: Adding info for No Bus:7:2
[   23.864060] device: 'loop3': device_add
[   23.868031] PM: Adding info for No Bus:loop3
[   23.872093] device: '7:3': device_add
[   23.876015] PM: Adding info for No Bus:7:3
[   23.880061] device: 'loop4': device_add
[   23.884030] PM: Adding info for No Bus:loop4
[   23.892029] device: '7:4': device_add
[   23.895700] PM: Adding info for No Bus:7:4
[   23.896059] device: 'loop5': device_add
[   23.900041] PM: Adding info for No Bus:loop5
[   23.908094] device: '7:5': device_add
[   23.911767] PM: Adding info for No Bus:7:5
[   23.912067] device: 'loop6': device_add
[   23.916040] PM: Adding info for No Bus:loop6
[   23.920085] device: '7:6': device_add
[   23.923753] PM: Adding info for No Bus:7:6
[   23.924071] device: 'loop7': device_add
[   23.928041] PM: Adding info for No Bus:loop7
[   23.932099] device: '7:7': device_add
[   23.935777] PM: Adding info for No Bus:7:7
[   23.936061] loop: module loaded
[   23.939205] initcall loop_init+0x0/0x167 returned 0 after 117187 usecs
[   23.940004] calling  cpqarray_init+0x0/0x235 @ 1
[   23.944002] Compaq SMART2 Driver (v 2.6.0)
[   23.948006] bus: 'pci': add driver cpqarray
[   23.952083] bus: 'pci': remove driver cpqarray
[   23.956052] driver: 'cpqarray': driver_release
[   23.960008] initcall cpqarray_init+0x0/0x235 returned -19 after 15625 usecs
[   23.964004] calling  cciss_init+0x0/0x81 @ 1
[   23.968002] HP CISS Driver (v 3.6.20)
[   23.972063] bus: 'cciss': registered
[   23.976043] bus: 'pci': add driver cciss
[   23.980090] initcall cciss_init+0x0/0x81 returned 0 after 11718 usecs
[   23.988003] calling  pkt_init+0x0/0x1ca @ 1
[   23.992052] device class 'pktcdvd': registering
[   23.996084] device: 'pktcdvd': device_add
[   24.000217] PM: Adding info for No Bus:pktcdvd
[   24.004072] initcall pkt_init+0x0/0x1ca returned 0 after 11718 usecs
[   24.012003] calling  nbd_init+0x0/0x2a7 @ 1
[   24.016990] nbd: registered device at major 43
[   24.020016] device: 'nbd0': device_add
[   24.024048] PM: Adding info for No Bus:nbd0
[   24.028111] device: '43:0': device_add
[   24.032026] PM: Adding info for No Bus:43:0
[   24.036076] device: 'nbd1': device_add
[   24.040032] PM: Adding info for No Bus:nbd1
[   24.044112] device: '43:1': device_add
[   24.048015] PM: Adding info for No Bus:43:1
[   24.052061] device: 'nbd2': device_add
[   24.056039] PM: Adding info for No Bus:nbd2
[   24.060110] device: '43:2': device_add
[   24.064024] PM: Adding info for No Bus:43:2
[   24.068079] device: 'nbd3': device_add
[   24.072032] PM: Adding info for No Bus:nbd3
[   24.076112] device: '43:3': device_add
[   24.080015] PM: Adding info for No Bus:43:3
[   24.084060] device: 'nbd4': device_add
[   24.088039] PM: Adding info for No Bus:nbd4
[   24.092103] device: '43:4': device_add
[   24.096023] PM: Adding info for No Bus:43:4
[   24.100084] device: 'nbd5': device_add
[   24.104032] PM: Adding info for No Bus:nbd5
[   24.108125] device: '43:5': device_add
[   24.112016] PM: Adding info for No Bus:43:5
[   24.116063] device: 'nbd6': device_add
[   24.120032] PM: Adding info for No Bus:nbd6
[   24.124114] device: '43:6': device_add
[   24.128015] PM: Adding info for No Bus:43:6
[   24.132077] device: 'nbd7': device_add
[   24.136032] PM: Adding info for No Bus:nbd7
[   24.140154] device: '43:7': device_add
[   24.144016] PM: Adding info for No Bus:43:7
[   24.148069] device: 'nbd8': device_add
[   24.152031] PM: Adding info for No Bus:nbd8
[   24.156113] device: '43:8': device_add
[   24.160015] PM: Adding info for No Bus:43:8
[   24.164061] device: 'nbd9': device_add
[   24.168040] PM: Adding info for No Bus:nbd9
[   24.172113] device: '43:9': device_add
[   24.176016] PM: Adding info for No Bus:43:9
[   24.180061] device: 'nbd10': device_add
[   24.184042] PM: Adding info for No Bus:nbd10
[   24.188113] device: '43:10': device_add
[   24.192016] PM: Adding info for No Bus:43:10
[   24.196062] device: 'nbd11': device_add
[   24.200040] PM: Adding info for No Bus:nbd11
[   24.204113] device: '43:11': device_add
[   24.208016] PM: Adding info for No Bus:43:11
[   24.216069] device: 'nbd12': device_add
[   24.219934] PM: Adding info for No Bus:nbd12
[   24.224113] device: '43:12': device_add
[   24.228019] PM: Adding info for No Bus:43:12
[   24.232068] device: 'nbd13': device_add
[   24.236041] PM: Adding info for No Bus:nbd13
[   24.240113] device: '43:13': device_add
[   24.244016] PM: Adding info for No Bus:43:13
[   24.248071] device: 'nbd14': device_add
[   24.252033] PM: Adding info for No Bus:nbd14
[   24.256123] device: '43:14': device_add
[   24.260016] PM: Adding info for No Bus:43:14
[   24.264062] device: 'nbd15': device_add
[   24.268040] PM: Adding info for No Bus:nbd15
[   24.272120] device: '43:15': device_add
[   24.276016] PM: Adding info for No Bus:43:15
[   24.280061] initcall nbd_init+0x0/0x2a7 returned 0 after 257812 usecs
[   24.288004] calling  init_cryptoloop+0x0/0x26 @ 1
[   24.292003] initcall init_cryptoloop+0x0/0x26 returned 0 after 0 usecs
[   24.296003] calling  tifm_7xx1_init+0x0/0x16 @ 1
[   24.304007] bus: 'pci': add driver tifm_7xx1
[   24.308070] initcall tifm_7xx1_init+0x0/0x16 returned 0 after 3906 usecs
[   24.312003] calling  phantom_init+0x0/0xe1 @ 1
[   24.316003] device class 'phantom': registering
[   24.324059] bus: 'pci': add driver phantom
[   24.328060] Phantom Linux Driver, version n0.9.8, init OK
[   24.332003] initcall phantom_init+0x0/0xe1 returned 0 after 15625 usecs
[   24.340003] calling  ioc4_init+0x0/0x16 @ 1
[   24.344003] bus: 'pci': add driver IOC4
[   24.348060] initcall ioc4_init+0x0/0x16 returned 0 after 3906 usecs
[   24.352003] calling  enclosure_init+0x0/0x14 @ 1
[   24.356002] device class 'enclosure': registering
[   24.364052] initcall enclosure_init+0x0/0x14 returned 0 after 7812 usecs
[   24.368003] calling  init_kgdbts+0x0/0x15 @ 1
[   24.372003] initcall init_kgdbts+0x0/0x15 returned 0 after 0 usecs
[   24.380003] calling  cs5535_mfgpt_init+0x0/0x1b2 @ 1
[   24.384018] initcall cs5535_mfgpt_init+0x0/0x1b2 returned -19 after 0 usecs
[   24.392003] calling  isl29003_init+0x0/0x11 @ 1
[   24.396004] bus: 'i2c': add driver isl29003
[   24.400055] i2c-core: driver [isl29003] registered
[   24.404004] initcall isl29003_init+0x0/0x11 returned 0 after 7812 usecs
[   24.412003] calling  c2port_init+0x0/0x45 @ 1
[   24.416002] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[   24.424011] device class 'c2port': registering
[   24.428053] initcall c2port_init+0x0/0x45 returned 0 after 11718 usecs
[   24.436003] calling  duramar2150_c2port_init+0x0/0x61 @ 1
[   24.440024] device: 'c2port0': device_add
[   24.444034] PM: Adding info for No Bus:c2port0
[   24.448050] c2port c2port0: C2 port uc added
[   24.452003] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[   24.460004] initcall duramar2150_c2port_init+0x0/0x61 returned 0 after 19531 usecs
[   24.468003] calling  at24_init+0x0/0x2a @ 1
[   24.472003] bus: 'i2c': add driver at24
[   24.476052] i2c-core: driver [at24] registered
[   24.480004] initcall at24_init+0x0/0x2a returned 0 after 7812 usecs
[   24.488004] calling  cb710_init_module+0x0/0x16 @ 1
[   24.492004] bus: 'pci': add driver cb710
[   24.496061] initcall cb710_init_module+0x0/0x16 returned 0 after 3906 usecs
[   24.504003] calling  vmballoon_init+0x0/0x166 @ 1
[   24.508003] initcall vmballoon_init+0x0/0x166 returned -19 after 0 usecs
[   24.512003] calling  sm501_base_init+0x0/0x20 @ 1
[   24.520005] bus: 'platform': add driver sm501
[   24.524061] bus: 'pci': add driver sm501
[   24.528060] initcall sm501_base_init+0x0/0x20 returned 0 after 7812 usecs
[   24.532003] calling  wm8994_i2c_init+0x0/0x2a @ 1
[   24.540002] bus: 'i2c': add driver wm8994
[   24.544053] i2c-core: driver [wm8994] registered
[   24.548004] initcall wm8994_i2c_init+0x0/0x2a returned 0 after 7812 usecs
[   24.552003] calling  timberdale_init+0x0/0x45 @ 1
[   24.560004] bus: 'pci': add driver timberdale
[   24.564068] Driver for timberdale has been successfully registered.
[   24.568004] initcall timberdale_init+0x0/0x45 returned 0 after 7812 usecs
[   24.576003] calling  lpc_sch_init+0x0/0x16 @ 1
[   24.580004] bus: 'pci': add driver lpc_sch
[   24.584062] initcall lpc_sch_init+0x0/0x16 returned 0 after 3906 usecs
[   24.592003] calling  rdc321x_sb_init+0x0/0x16 @ 1
[   24.596003] bus: 'pci': add driver RDC321x Southbridge
[   24.600062] initcall rdc321x_sb_init+0x0/0x16 returned 0 after 3906 usecs
[   24.608003] calling  scsi_tgt_init+0x0/0x72 @ 1
[   24.612198] device: 'tgt': device_add
[   24.616219] PM: Adding info for No Bus:tgt
[   24.620064] initcall scsi_tgt_init+0x0/0x72 returned 0 after 7812 usecs
[   24.628003] calling  raid_init+0x0/0xf @ 1
[   24.632002] device class 'raid_devices': registering
[   24.636057] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   24.644003] calling  spi_transport_init+0x0/0x65 @ 1
[   24.648006] device class 'spi_transport': registering
[   24.652051] device class 'spi_host': registering
[   24.656052] initcall spi_transport_init+0x0/0x65 returned 0 after 7812 usecs
[   24.664003] calling  fc_transport_init+0x0/0x71 @ 1
[   24.668002] device class 'fc_host': registering
[   24.672050] device class 'fc_vports': registering
[   24.680050] device class 'fc_remote_ports': registering
[   24.684050] device class 'fc_transport': registering
[   24.688051] initcall fc_transport_init+0x0/0x71 returned 0 after 19531 usecs
[   24.696004] calling  iscsi_transport_init+0x0/0x11f @ 1
[   24.700002] Loading iSCSI transport class v2.0-870.
[   24.704002] device class 'iscsi_transport': registering
[   24.712061] device class 'iscsi_endpoint': registering
[   24.716050] device class 'iscsi_host': registering
[   24.720050] device class 'iscsi_connection': registering
[   24.728050] device class 'iscsi_session': registering
[   24.732078] initcall iscsi_transport_init+0x0/0x11f returned 0 after 31250 usecs
[   24.736004] calling  sas_transport_init+0x0/0x9f @ 1
[   24.740002] device class 'sas_host': registering
[   24.744063] device class 'sas_phy': registering
[   24.748052] device class 'sas_port': registering
[   24.752051] device class 'sas_device': registering
[   24.756050] device class 'sas_end_device': registering
[   24.760059] device class 'sas_expander': registering
[   24.764052] initcall sas_transport_init+0x0/0x9f returned 0 after 23437 usecs
[   24.768004] calling  sas_class_init+0x0/0x2c @ 1
[   24.772184] initcall sas_class_init+0x0/0x2c returned 0 after 0 usecs
[   24.776003] calling  scsi_dh_init+0x0/0x34 @ 1
[   24.780005] initcall scsi_dh_init+0x0/0x34 returned 0 after 0 usecs
[   24.784003] calling  clariion_init+0x0/0x2c @ 1
[   24.788002] emc: device handler registered
[   24.792004] initcall clariion_init+0x0/0x2c returned 0 after 3906 usecs
[   24.796003] calling  alua_init+0x0/0x2c @ 1
[   24.800002] alua: device handler registered
[   24.804004] initcall alua_init+0x0/0x2c returned 0 after 3906 usecs
[   24.808003] calling  libfc_init+0x0/0x39 @ 1
[   24.812314] initcall libfc_init+0x0/0x39 returned 0 after 0 usecs
[   24.816006] calling  fcoe_init+0x0/0x164 @ 1
[   24.820051] initcall fcoe_init+0x0/0x164 returned 0 after 0 usecs
[   24.824003] calling  fnic_init_module+0x0/0x1a7 @ 1
[   24.828003] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[   24.832465] bus: 'pci': add driver fnic
[   24.836083] initcall fnic_init_module+0x0/0x1a7 returned 0 after 7812 usecs
[   24.844004] calling  iscsi_sw_tcp_init+0x0/0x3a @ 1
[   24.848009] device: 'tcp': device_add
[   24.852011] PM: Adding info for No Bus:tcp
[   24.856051] iscsi: registered transport (tcp)
[   24.860004] initcall iscsi_sw_tcp_init+0x0/0x3a returned 0 after 11718 usecs
[   24.868003] calling  advansys_init+0x0/0x5e @ 1
[   24.872002] bus: 'isa': add driver advansys
[   24.876057] device: 'advansys.0': device_add
[   24.880006] bus: 'isa': add device advansys.0
[   24.884011] PM: Adding info for isa:advansys.0
[   24.888047] bus: 'isa': driver_probe_device: matched device advansys.0 with driver advansys
[   24.896002] bus: 'isa': really_probe: probing driver advansys with device advansys.0
[   24.904032] device: 'advansys.1': device_add
[   24.908006] bus: 'isa': add device advansys.1
[   24.912021] PM: Adding info for isa:advansys.1
[   24.920047] bus: 'isa': driver_probe_device: matched device advansys.1 with driver advansys
[   24.928002] bus: 'isa': really_probe: probing driver advansys with device advansys.1
[   24.936022] device: 'advansys.2': device_add
[   24.940005] bus: 'isa': add device advansys.2
[   24.944031] PM: Adding info for isa:advansys.2
[   24.948045] bus: 'isa': driver_probe_device: matched device advansys.2 with driver advansys
[   24.956002] bus: 'isa': really_probe: probing driver advansys with device advansys.2
[   24.964022] device: 'advansys.3': device_add
[   24.968008] bus: 'isa': add device advansys.3
[   24.972016] PM: Adding info for isa:advansys.3
[   24.976046] bus: 'isa': driver_probe_device: matched device advansys.3 with driver advansys
[   24.984002] bus: 'isa': really_probe: probing driver advansys with device advansys.3
[   24.992021] device: 'advansys.4': device_add
[   24.996007] bus: 'isa': add device advansys.4
[   25.000019] PM: Adding info for isa:advansys.4
[   25.004047] bus: 'isa': driver_probe_device: matched device advansys.4 with driver advansys
[   25.016002] bus: 'isa': really_probe: probing driver advansys with device advansys.4
[   25.020023] device: 'advansys.5': device_add
[   25.028006] bus: 'isa': add device advansys.5
[   25.032011] PM: Adding info for isa:advansys.5
[   25.036045] bus: 'isa': driver_probe_device: matched device advansys.5 with driver advansys
[   25.044002] bus: 'isa': really_probe: probing driver advansys with device advansys.5
[   25.052021] device: 'advansys.6': device_add
[   25.056006] bus: 'isa': add device advansys.6
[   25.060011] PM: Adding info for isa:advansys.6
[   25.064045] bus: 'isa': driver_probe_device: matched device advansys.6 with driver advansys
[   25.072002] bus: 'isa': really_probe: probing driver advansys with device advansys.6
[   25.080020] device: 'advansys.7': device_add
[   25.084007] bus: 'isa': add device advansys.7
[   25.088011] PM: Adding info for isa:advansys.7
[   25.092045] bus: 'isa': driver_probe_device: matched device advansys.7 with driver advansys
[   25.100002] bus: 'isa': really_probe: probing driver advansys with device advansys.7
[   25.108027] device: 'advansys.8': device_add
[   25.112006] bus: 'isa': add device advansys.8
[   25.120021] PM: Adding info for isa:advansys.8
[   25.124047] bus: 'isa': driver_probe_device: matched device advansys.8 with driver advansys
[   25.132002] bus: 'isa': really_probe: probing driver advansys with device advansys.8
[   25.140022] device: 'advansys.9': device_add
[   25.144006] bus: 'isa': add device advansys.9
[   25.148011] PM: Adding info for isa:advansys.9
[   25.152045] bus: 'isa': driver_probe_device: matched device advansys.9 with driver advansys
[   25.160002] bus: 'isa': really_probe: probing driver advansys with device advansys.9
[   25.168020] device: 'advansys.10': device_add
[   25.172006] bus: 'isa': add device advansys.10
[   25.176020] PM: Adding info for isa:advansys.10
[   25.180047] bus: 'isa': driver_probe_device: matched device advansys.10 with driver advansys
[   25.188002] bus: 'isa': really_probe: probing driver advansys with device advansys.10
[   25.196021] bus: 'isa': add driver advansys_vlb
[   25.204057] device: 'advansys_vlb.0': device_add
[   25.208006] bus: 'isa': add device advansys_vlb.0
[   25.212011] PM: Adding info for isa:advansys_vlb.0
[   25.216046] bus: 'isa': driver_probe_device: matched device advansys_vlb.0 with driver advansys_vlb
[   25.224002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.0
[   25.232022] device: 'advansys_vlb.1': device_add
[   25.240006] bus: 'isa': add device advansys_vlb.1
[   25.244011] PM: Adding info for isa:advansys_vlb.1
[   25.248046] bus: 'isa': driver_probe_device: matched device advansys_vlb.1 with driver advansys_vlb
[   25.256002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.1
[   25.264021] device: 'advansys_vlb.2': device_add
[   25.272006] bus: 'isa': add device advansys_vlb.2
[   25.276011] PM: Adding info for isa:advansys_vlb.2
[   25.280046] bus: 'isa': driver_probe_device: matched device advansys_vlb.2 with driver advansys_vlb
[   25.288002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.2
[   25.296020] device: 'advansys_vlb.3': device_add
[   25.300006] bus: 'isa': add device advansys_vlb.3
[   25.308011] PM: Adding info for isa:advansys_vlb.3
[   25.312046] bus: 'isa': driver_probe_device: matched device advansys_vlb.3 with driver advansys_vlb
[   25.320002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.3
[   25.328019] device: 'advansys_vlb.4': device_add
[   25.332006] bus: 'isa': add device advansys_vlb.4
[   25.340021] PM: Adding info for isa:advansys_vlb.4
[   25.344047] bus: 'isa': driver_probe_device: matched device advansys_vlb.4 with driver advansys_vlb
[   25.352002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.4
[   25.360023] device: 'advansys_vlb.5': device_add
[   25.364006] bus: 'isa': add device advansys_vlb.5
[   25.368011] PM: Adding info for isa:advansys_vlb.5
[   25.376046] bus: 'isa': driver_probe_device: matched device advansys_vlb.5 with driver advansys_vlb
[   25.384002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.5
[   25.392034] device: 'advansys_vlb.6': device_add
[   25.396007] bus: 'isa': add device advansys_vlb.6
[   25.400011] PM: Adding info for isa:advansys_vlb.6
[   25.408046] bus: 'isa': driver_probe_device: matched device advansys_vlb.6 with driver advansys_vlb
[   25.416002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.6
[   25.424023] device: 'advansys_vlb.7': device_add
[   25.428006] bus: 'isa': add device advansys_vlb.7
[   25.432011] PM: Adding info for isa:advansys_vlb.7
[   25.440028] bus: 'isa': driver_probe_device: matched device advansys_vlb.7 with driver advansys_vlb
[   25.448002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.7
[   25.456022] device: 'advansys_vlb.8': device_add
[   25.460006] bus: 'isa': add device advansys_vlb.8
[   25.464012] PM: Adding info for isa:advansys_vlb.8
[   25.468046] bus: 'isa': driver_probe_device: matched device advansys_vlb.8 with driver advansys_vlb
[   25.480002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.8
[   25.488021] device: 'advansys_vlb.9': device_add
[   25.492006] bus: 'isa': add device advansys_vlb.9
[   25.496011] PM: Adding info for isa:advansys_vlb.9
[   25.500046] bus: 'isa': driver_probe_device: matched device advansys_vlb.9 with driver advansys_vlb
[   25.512002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.9
[   25.520028] device: 'advansys_vlb.10': device_add
[   25.524007] bus: 'isa': add device advansys_vlb.10
[   25.528020] PM: Adding info for isa:advansys_vlb.10
[   25.532047] bus: 'isa': driver_probe_device: matched device advansys_vlb.10 with driver advansys_vlb
[   25.544002] bus: 'isa': really_probe: probing driver advansys_vlb with device advansys_vlb.10
[   25.552024] bus: 'pci': add driver advansys
[   25.556063] initcall advansys_init+0x0/0x5e returned 0 after 667968 usecs
[   25.564003] calling  adpt_init+0x0/0xdfd @ 1
[   25.568002] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[   25.572001] Detecting Adaptec I2O RAID controllers...
[   25.576008] initcall adpt_init+0x0/0xdfd returned -19 after 7812 usecs
[   25.584003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.588027] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.596007] calling  arcmsr_module_init+0x0/0x16 @ 1
[   25.600004] bus: 'pci': add driver arcmsr
[   25.604062] initcall arcmsr_module_init+0x0/0x16 returned 0 after 3906 usecs
[   25.612003] calling  ahc_linux_init+0x0/0x4f @ 1
[   25.616006] bus: 'pci': add driver aic7xxx
[   25.620069] initcall ahc_linux_init+0x0/0x4f returned 0 after 3906 usecs
[   25.628003] calling  aac_init+0x0/0x65 @ 1
[   25.632002] Adaptec aacraid driver 1.1-5[26400]-ms
[   25.636004] bus: 'pci': add driver aacraid
[   25.640069] initcall aac_init+0x0/0x65 returned 0 after 7812 usecs
[   25.648003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.652249] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.660003] calling  aic94xx_init+0x0/0x115 @ 1
[   25.664002] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[   25.672341] bus: 'pci': add driver aic94xx
[   25.676074] initcall aic94xx_init+0x0/0x115 returned 0 after 11718 usecs
[   25.680003] calling  pm8001_init+0x0/0x4c @ 1
[   25.688016] bus: 'pci': add driver pm8001
[   25.692070] initcall pm8001_init+0x0/0x4c returned 0 after 3906 usecs
[   25.696003] calling  ips_module_init+0x0/0x37e @ 1
[   25.700004] bus: 'pci': add driver ips
[   25.704073] bus: 'pci': remove driver ips
[   25.708050] driver: 'ips': driver_release
[   25.712008] initcall ips_module_init+0x0/0x37e returned -19 after 11718 usecs
[   25.720003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.724004] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.732003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.740004] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.744003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.752043] NCR53c406a: no available ports found
[   25.756003] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 3906 usecs
[   25.764003] calling  qlogicfas408_init+0x0/0x7 @ 1
[   25.768003] initcall qlogicfas408_init+0x0/0x7 returned 0 after 0 usecs
[   25.776003] calling  qlogicfas_init+0x0/0x1f4 @ 1
[   25.780002] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsinitcall qlogicfas_init+0x0/0x1f4 returned -19 after 7812 usecs
[   25.796003] calling  qla1280_init+0x0/0x16 @ 1
[   25.800004] bus: 'pci': add driver qla1280
[   25.804068] initcall qla1280_init+0x0/0x16 returned 0 after 3906 usecs
[   25.808003] calling  qla2x00_module_init+0x0/0x131 @ 1
[   25.816179] QLogic Fibre Channel HBA Driver: 8.03.02-k2
[   25.820006] bus: 'pci': add driver qla2xxx
[   25.824062] initcall qla2x00_module_init+0x0/0x131 returned 0 after 7812 usecs
[   25.832003] calling  qla4xxx_module_init+0x0/0xbd @ 1
[   25.836157] device: 'qla4xxx': device_add
[   25.840011] PM: Adding info for No Bus:qla4xxx
[   25.844049] iscsi: registered transport (qla4xxx)
[   25.848005] bus: 'pci': add driver qla4xxx
[   25.856060] QLogic iSCSI HBA Driver
[   25.859541] initcall qla4xxx_module_init+0x0/0xbd returned 0 after 19531 usecs
[   25.864003] calling  lpfc_init+0x0/0xad @ 1
[   25.868002] Emulex LightPulse Fibre Channel SCSI driver 8.3.12
[   25.876001] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[   25.880027] bus: 'pci': add driver lpfc
[   25.884073] initcall lpfc_init+0x0/0xad returned 0 after 15625 usecs
[   25.892004] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.896011] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.904003] calling  hpsa_init+0x0/0x16 @ 1
[   25.908004] bus: 'pci': add driver hpsa
[   25.912061] initcall hpsa_init+0x0/0x16 returned 0 after 3906 usecs
[   25.916003] calling  init_this_scsi_driver+0x0/0xc9 @ 1
[   25.924006] initcall init_this_scsi_driver+0x0/0xc9 returned -19 after 0 usecs
[   25.932003] calling  dc395x_module_init+0x0/0x16 @ 1
[   25.936004] bus: 'pci': add driver dc395x
[   25.940060] initcall dc395x_module_init+0x0/0x16 returned 0 after 3906 usecs
[   25.948003] calling  dc390_module_init+0x0/0x89 @ 1
[   25.952002] DC390: clustering now enabled by default. If you get problems load
[   25.960002]        with "disable_clustering=1" and report to maintainers
[   25.964004] bus: 'pci': add driver tmscsim
[   25.968060] initcall dc390_module_init+0x0/0x89 returned 0 after 15625 usecs
[   25.976003] calling  megaraid_init+0x0/0xa6 @ 1
[   25.980017] bus: 'pci': add driver megaraid_legacy
[   25.984068] initcall megaraid_init+0x0/0xa6 returned 0 after 3906 usecs
[   25.992003] calling  _scsih_init+0x0/0x11b @ 1
[   25.996002] mpt2sas version 05.100.00.02 loaded
[   26.000021] device: 'mpt2ctl': device_add
[   26.004180] PM: Adding info for No Bus:mpt2ctl
[   26.012055] bus: 'pci': add driver mpt2sas
[   26.016077] initcall _scsih_init+0x0/0x11b returned 0 after 19531 usecs
[   26.020004] calling  gdth_init+0x0/0x7f2 @ 1
[   26.024002] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[   26.032008] bus: 'pci': add driver gdth
[   26.036068] initcall gdth_init+0x0/0x7f2 returned 0 after 11718 usecs
[   26.040003] calling  initio_init_driver+0x0/0x16 @ 1
[   26.048004] bus: 'pci': add driver initio
[   26.052062] initcall initio_init_driver+0x0/0x16 returned 0 after 3906 usecs
[   26.056003] calling  inia100_init+0x0/0x16 @ 1
[   26.064004] bus: 'pci': add driver inia100
[   26.068061] initcall inia100_init+0x0/0x16 returned 0 after 3906 usecs
[   26.072003] calling  tw_init+0x0/0x25 @ 1
[   26.076002] 3ware Storage Controller device driver for Linux v1.26.02.003.
[   26.084004] bus: 'pci': add driver 3w-xxxx
[   26.088061] initcall tw_init+0x0/0x25 returned 0 after 11718 usecs
[   26.096003] calling  twa_init+0x0/0x25 @ 1
[   26.100002] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[   26.104005] bus: 'pci': add driver 3w-9xxx
[   26.108061] initcall twa_init+0x0/0x25 returned 0 after 7812 usecs
[   26.116005] calling  twl_init+0x0/0x25 @ 1
[   26.120002] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[   26.128005] bus: 'pci': add driver 3w-sas
[   26.132073] initcall twl_init+0x0/0x25 returned 0 after 11718 usecs
[   26.136003] calling  init_nsp32+0x0/0x2c @ 1
[   26.144002] nsp32: loading...
[   26.146973] bus: 'pci': add driver nsp32
[   26.148070] initcall init_nsp32+0x0/0x2c returned 0 after 3906 usecs
[   26.156003] calling  ipr_init+0x0/0x34 @ 1
[   26.160002] ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
[   26.168005] bus: 'pci': add driver ipr
[   26.172063] initcall ipr_init+0x0/0x34 returned 0 after 11718 usecs
[   26.176003] calling  hptiop_module_init+0x0/0x2a @ 1
[   26.184002] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[   26.188005] bus: 'pci': add driver hptiop
[   26.192062] initcall hptiop_module_init+0x0/0x2a returned 0 after 7812 usecs
[   26.200003] calling  cxgb3i_init_module+0x0/0x41 @ 1
[   26.204003] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[   26.212008] device: 'cxgb3i': device_add
[   26.216011] PM: Adding info for No Bus:cxgb3i
[   26.220049] iscsi: registered transport (cxgb3i)
[   26.224009] initcall cxgb3i_init_module+0x0/0x41 returned 0 after 19531 usecs
[   26.232003] calling  bnx2i_mod_init+0x0/0xa5 @ 1
[   26.236002] Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.1 (Mar 24, 2010)
[   26.240008] device: 'bnx2i': device_add
[   26.244011] PM: Adding info for No Bus:bnx2i
[   26.252049] iscsi: registered transport (bnx2i)
[   26.256006] initcall bnx2i_mod_init+0x0/0xa5 returned 0 after 19531 usecs
[   26.260003] calling  beiscsi_module_init+0x0/0x88 @ 1
[   26.268008] device: 'be2iscsi': device_add
[   26.272010] PM: Adding info for No Bus:be2iscsi
[   26.276048] iscsi: registered transport (be2iscsi)
[   26.280006] bus: 'pci': add driver be2iscsi
[   26.284062] initcall beiscsi_module_init+0x0/0x88 returned 0 after 15625 usecs
[   26.292003] calling  pmcraid_init+0x0/0x10e @ 1
[   26.296013] device class 'pmcsas': registering
[   26.300104] bus: 'pci': add driver PMC MaxRAID
[   26.304072] initcall pmcraid_init+0x0/0x10e returned 0 after 7812 usecs
[   26.312004] calling  pvscsi_init+0x0/0x2a @ 1
[   26.316002] VMware PVSCSI driver - version 1.0.1.0-k
[   26.320005] bus: 'pci': add driver vmw_pvscsi
[   26.324062] initcall pvscsi_init+0x0/0x2a returned 0 after 7812 usecs
[   26.332003] calling  init_st+0x0/0x162 @ 1
[   26.336003] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[   26.344002] device class 'scsi_tape': registering
[   26.348053] bus: 'scsi': add driver st
[   26.352061] initcall init_st+0x0/0x162 returned 0 after 15625 usecs
[   26.356003] calling  init_osst+0x0/0x124 @ 1
[   26.360002] osst :I: Tape driver with OnStream support version 0.99.4
[   26.360004] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   26.376004] device class 'onstream_tape': registering
[   26.380054] bus: 'scsi': add driver osst
[   26.384055] initcall init_osst+0x0/0x124 returned 0 after 23437 usecs
[   26.388003] calling  init_sd+0x0/0x12e @ 1
[   26.396016] device class 'scsi_disk': registering
[   26.400062] bus: 'scsi': add driver sd
[   26.404241] initcall init_sd+0x0/0x12e returned 0 after 7812 usecs
[   26.408003] calling  init_sr+0x0/0x3d @ 1
[   26.412009] bus: 'scsi': add driver sr
[   26.416057] initcall init_sr+0x0/0x3d returned 0 after 3906 usecs
[   26.424003] calling  init_ch_module+0x0/0x9d @ 1
[   26.428002] SCSI Media Changer driver v0.25 
[   26.432002] device class 'scsi_changer': registering
[   26.436056] bus: 'scsi': add driver ch
[   26.440065] initcall init_ch_module+0x0/0x9d returned 0 after 11718 usecs
[   26.448004] calling  ses_init+0x0/0x33 @ 1
[   26.452003] bus: 'scsi': add driver ses
[   26.456056] initcall ses_init+0x0/0x33 returned 0 after 3906 usecs
[   26.460003] calling  ahci_init+0x0/0x16 @ 1
[   26.464007] bus: 'pci': add driver ahci
[   26.468075] initcall ahci_init+0x0/0x16 returned 0 after 3906 usecs
[   26.476003] calling  ahci_init+0x0/0x14 @ 1
[   26.480005] bus: 'platform': add driver ahci
[   26.484062] bus: 'platform': remove driver ahci
[   26.488052] driver: 'ahci': driver_release
[   26.492007] initcall ahci_init+0x0/0x14 returned -19 after 11718 usecs
[   26.500003] calling  inic_init+0x0/0x16 @ 1
[   26.504006] bus: 'pci': add driver sata_inic162x
[   26.508063] initcall inic_init+0x0/0x16 returned 0 after 3906 usecs
[   26.516003] calling  sil24_init+0x0/0x16 @ 1
[   26.520005] bus: 'pci': add driver sata_sil24
[   26.524063] initcall sil24_init+0x0/0x16 returned 0 after 3906 usecs
[   26.528003] calling  adma_ata_init+0x0/0x16 @ 1
[   26.536005] bus: 'pci': add driver pdc_adma
[   26.540062] initcall adma_ata_init+0x0/0x16 returned 0 after 3906 usecs
[   26.544003] calling  pdc_sata_init+0x0/0x16 @ 1
[   26.548006] bus: 'pci': add driver sata_sx4
[   26.552062] initcall pdc_sata_init+0x0/0x16 returned 0 after 3906 usecs
[   26.560003] calling  piix_init+0x0/0x24 @ 1
[   26.564005] bus: 'pci': add driver ata_piix
[   26.568087] initcall piix_init+0x0/0x24 returned 0 after 3906 usecs
[   26.576004] calling  nv_init+0x0/0x16 @ 1
[   26.580006] bus: 'pci': add driver sata_nv
[   26.584065] initcall nv_init+0x0/0x16 returned 0 after 3906 usecs
[   26.588003] calling  pdc_ata_init+0x0/0x16 @ 1
[   26.596006] bus: 'pci': add driver sata_promise
[   26.600064] initcall pdc_ata_init+0x0/0x16 returned 0 after 3906 usecs
[   26.604003] calling  uli_init+0x0/0x16 @ 1
[   26.608006] bus: 'pci': add driver sata_uli
[   26.612063] initcall uli_init+0x0/0x16 returned 0 after 3906 usecs
[   26.620003] calling  svia_init+0x0/0x16 @ 1
[   26.624006] bus: 'pci': add driver sata_via
[   26.628063] initcall svia_init+0x0/0x16 returned 0 after 3906 usecs
[   26.636004] calling  amd_init+0x0/0x16 @ 1
[   26.640006] bus: 'pci': add driver pata_amd
[   26.644010] bus: 'pci': driver_probe_device: matched device 0000:00:06.0 with driver pata_amd
[   26.652002] bus: 'pci': really_probe: probing driver pata_amd with device 0000:00:06.0
[   26.660009] pata_amd 0000:00:06.0: version 0.4.1
[   26.664113] pata_amd 0000:00:06.0: setting latency timer to 64
[   26.668107] scsi0 : pata_amd
[   26.672327] device: 'host0': device_add
[   26.676014] PM: Adding info for No Bus:host0
[   26.680004] device: 'host0': device_add
[   26.684037] PM: Adding info for No Bus:host0
[   26.688076] scsi1 : pata_amd
[   26.692021] device: 'host1': device_add
[   26.696012] PM: Adding info for No Bus:host1
[   26.700004] device: 'host1': device_add
[   26.704048] PM: Adding info for No Bus:host1
[   26.708067] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[   26.716002] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[   26.724012] driver: '0000:00:06.0': driver_bound: bound to device 'pata_amd'
[   26.724107] calling  1_async_port_probe+0x0/0x9d @ 119
[   26.724269] calling  2_async_port_probe+0x0/0x9d @ 120
[   26.724271] async_waiting @ 120
[   26.744005] bus: 'pci': really_probe: bound device 0000:00:06.0 to driver pata_amd
[   26.752059] initcall amd_init+0x0/0x16 returned 0 after 109375 usecs
[   26.756003] calling  artop_init+0x0/0x16 @ 1
[   26.760007] bus: 'pci': add driver pata_artop
[   26.764063] initcall artop_init+0x0/0x16 returned 0 after 3906 usecs
[   26.772003] calling  atiixp_init+0x0/0x16 @ 1
[   26.776006] bus: 'pci': add driver pata_atiixp
[   26.780062] initcall atiixp_init+0x0/0x16 returned 0 after 3906 usecs
[   26.788004] calling  atp867x_init+0x0/0x16 @ 1
[   26.792006] bus: 'pci': add driver pata_atp867x
[   26.796072] initcall atp867x_init+0x0/0x16 returned 0 after 3906 usecs
[   26.804008] calling  cs5520_init+0x0/0x16 @ 1
[   26.808007] bus: 'pci': add driver pata_cs5520
[   26.812069] initcall cs5520_init+0x0/0x16 returned 0 after 3906 usecs
[   26.820003] calling  cs5535_init+0x0/0x16 @ 1
[   26.824006] bus: 'pci': add driver cs5535
[   26.828072] initcall cs5535_init+0x0/0x16 returned 0 after 3906 usecs
[   26.832004] calling  cy82c693_init+0x0/0x16 @ 1
[   26.836007] bus: 'pci': add driver pata_cypress
[   26.844063] initcall cy82c693_init+0x0/0x16 returned 0 after 7812 usecs
[   26.848003] calling  efar_init+0x0/0x16 @ 1
[   26.852006] bus: 'pci': add driver pata_efar
[   26.856061] initcall efar_init+0x0/0x16 returned 0 after 3906 usecs
[   26.864003] calling  hpt37x_init+0x0/0x16 @ 1
[   26.868006] bus: 'pci': add driver pata_hpt37x
[   26.872062] initcall hpt37x_init+0x0/0x16 returned 0 after 3906 usecs
[   26.880003] calling  hpt3x2n_init+0x0/0x16 @ 1
[   26.884006] bus: 'pci': add driver pata_hpt3x2n
[   26.888063] initcall hpt3x2n_init+0x0/0x16 returned 0 after 3906 usecs
[   26.896005] calling  it821x_init+0x0/0x16 @ 1
[   26.900021] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
[   26.900034] bus: 'pci': add driver pata_it821x
[   26.900097] initcall it821x_init+0x0/0x16 returned 0 after 0 usecs
[   26.900100] calling  jmicron_init+0x0/0x16 @ 1
[   26.900107] bus: 'pci': add driver pata_jmicron
[   26.900169] initcall jmicron_init+0x0/0x16 returned 0 after 0 usecs
[   26.900172] calling  marvell_init+0x0/0x16 @ 1
[   26.900179] bus: 'pci': add driver pata_marvell
[   26.900251] initcall marvell_init+0x0/0x16 returned 0 after 0 usecs
[   26.900254] calling  ninja32_init+0x0/0x16 @ 1
[   26.900262] bus: 'pci': add driver pata_ninja32
[   26.900324] initcall ninja32_init+0x0/0x16 returned 0 after 0 usecs
[   26.900328] calling  ns87415_init+0x0/0x16 @ 1
[   26.900335] bus: 'pci': add driver pata_ns87415
[   26.900397] initcall ns87415_init+0x0/0x16 returned 0 after 0 usecs
[   26.900400] calling  oldpiix_init+0x0/0x16 @ 1
[   26.900407] bus: 'pci': add driver pata_oldpiix
[   26.900469] initcall oldpiix_init+0x0/0x16 returned 0 after 0 usecs
[   26.900472] calling  optidma_init+0x0/0x16 @ 1
[   26.900480] bus: 'pci': add driver pata_optidma
[   26.900541] initcall optidma_init+0x0/0x16 returned 0 after 0 usecs
[   26.900545] calling  pdc2027x_init+0x0/0x16 @ 1
[   26.900552] bus: 'pci': add driver pata_pdc2027x
[   26.900614] initcall pdc2027x_init+0x0/0x16 returned 0 after 0 usecs
[   26.900618] calling  pdc202xx_init+0x0/0x16 @ 1
[   26.900625] bus: 'pci': add driver pata_pdc202xx_old
[   26.900687] initcall pdc202xx_init+0x0/0x16 returned 0 after 0 usecs
[   26.900691] calling  radisys_init+0x0/0x16 @ 1
[   26.900698] bus: 'pci': add driver pata_radisys
[   26.900769] initcall radisys_init+0x0/0x16 returned 0 after 0 usecs
[   26.900773] calling  sc1200_init+0x0/0x16 @ 1
[   26.900780] bus: 'pci': add driver sc1200
[   26.900842] initcall sc1200_init+0x0/0x16 returned 0 after 0 usecs
[   26.900845] calling  sch_init+0x0/0x16 @ 1
[   26.900853] bus: 'pci': add driver pata_sch
[   26.900914] initcall sch_init+0x0/0x16 returned 0 after 0 usecs
[   26.900918] calling  sis_init+0x0/0x16 @ 1
[   26.900925] bus: 'pci': add driver pata_sis
[   26.900987] initcall sis_init+0x0/0x16 returned 0 after 0 usecs
[   26.900991] calling  ata_tosh_init+0x0/0x16 @ 1
[   26.900998] bus: 'pci': add driver pata_piccolo
[   26.901061] initcall ata_tosh_init+0x0/0x16 returned 0 after 0 usecs
[   26.901064] calling  via_init+0x0/0x16 @ 1
[   26.901072] bus: 'pci': add driver pata_via
[   26.901134] initcall via_init+0x0/0x16 returned 0 after 0 usecs
[   26.901138] calling  sl82c105_init+0x0/0x16 @ 1
[   26.901145] bus: 'pci': add driver pata_sl82c105
[   26.901207] initcall sl82c105_init+0x0/0x16 returned 0 after 0 usecs
[   26.901211] calling  cmd640_init+0x0/0x16 @ 1
[   26.901219] bus: 'pci': add driver pata_cmd640
[   26.901290] initcall cmd640_init+0x0/0x16 returned 0 after 0 usecs
[   26.901294] calling  pata_platform_init+0x0/0xf @ 1
[   26.901299] bus: 'platform': add driver pata_platform
[   26.901356] initcall pata_platform_init+0x0/0xf returned 0 after 0 usecs
[   26.901359] calling  qdi_init+0x0/0x1c0 @ 1
[   26.901363] initcall qdi_init+0x0/0x1c0 returned -19 after 0 usecs
[   26.901367] calling  rz1000_init+0x0/0x16 @ 1
[   26.901375] bus: 'pci': add driver pata_rz1000
[   26.901438] initcall rz1000_init+0x0/0x16 returned 0 after 0 usecs
[   26.901441] calling  winbond_init+0x0/0x26d @ 1
[   26.901445] initcall winbond_init+0x0/0x26d returned -19 after 0 usecs
[   26.901449] calling  ata_generic_init+0x0/0x16 @ 1
[   26.901456] bus: 'pci': add driver ata_generic
[   26.901519] initcall ata_generic_init+0x0/0x16 returned 0 after 0 usecs
[   26.901523] calling  legacy_init+0x0/0x82a @ 1
[   26.901592] initcall legacy_init+0x0/0x82a returned -19 after 0 usecs
[   26.901595] calling  marvell_init+0x0/0x49 @ 1
[   26.901598] bus: 'mdio_bus': add driver Marvell 88E1101
[   26.901662] bus: 'mdio_bus': add driver Marvell 88E1112
[   26.901751] bus: 'mdio_bus': add driver Marvell 88E1111
[   26.901808] bus: 'mdio_bus': add driver Marvell 88E1118
[   26.901864] bus: 'mdio_bus': add driver Marvell 88E1121R
[   26.901919] bus: 'mdio_bus': add driver Marvell 88E1145
[   26.901981] bus: 'mdio_bus': add driver Marvell 88E1240
[   26.902035] initcall marvell_init+0x0/0x49 returned 0 after 0 usecs
[   26.902039] calling  lxt_init+0x0/0x33 @ 1
[   26.902041] bus: 'mdio_bus': add driver LXT970
[   26.902094] bus: 'mdio_bus': add driver LXT971
[   26.902148] initcall lxt_init+0x0/0x33 returned 0 after 0 usecs
[   26.902151] calling  qs6612_init+0x0/0xf @ 1
[   26.902153] bus: 'mdio_bus': add driver QS6612
[   26.902207] initcall qs6612_init+0x0/0xf returned 0 after 0 usecs
[   26.902211] calling  smsc_init+0x0/0x81 @ 1
[   26.902213] bus: 'mdio_bus': add driver SMSC LAN83C185
[   26.902266] bus: 'mdio_bus': add driver SMSC LAN8187
[   26.902318] bus: 'mdio_bus': add driver SMSC LAN8700
[   26.902370] bus: 'mdio_bus': add driver SMSC LAN911x Internal PHY
[   26.902423] bus: 'mdio_bus': add driver SMSC LAN8710/LAN8720
[   26.902478] initcall smsc_init+0x0/0x81 returned 0 after 0 usecs
[   26.902481] calling  vsc82xx_init+0x0/0x33 @ 1
[   26.902484] bus: 'mdio_bus': add driver Vitesse VSC8244
[   26.902536] bus: 'mdio_bus': add driver Vitesse VSC8221
[   26.902600] initcall vsc82xx_init+0x0/0x33 returned 0 after 0 usecs
[   26.902603] calling  ip175c_init+0x0/0xf @ 1
[   26.902606] bus: 'mdio_bus': add driver ICPlus IP175C
[   26.902660] initcall ip175c_init+0x0/0xf returned 0 after 0 usecs
[   26.902663] calling  et1011c_init+0x0/0xf @ 1
[   26.902666] bus: 'mdio_bus': add driver ET1011C
[   26.902720] initcall et1011c_init+0x0/0xf returned 0 after 0 usecs
[   26.902724] calling  fixed_mdio_bus_init+0x0/0xc7 @ 1
[   26.902731] Registering platform device 'Fixed MDIO bus.0'. Parent at platform
[   26.902734] device: 'Fixed MDIO bus.0': device_add
[   26.902741] bus: 'platform': add device Fixed MDIO bus.0
[   26.902755] PM: Adding info for platform:Fixed MDIO bus.0
[   26.902831] device: '0': device_add
[   26.902848] PM: Adding info for No Bus:0
[   26.902899] Fixed MDIO Bus: probed
[   26.902903] initcall fixed_mdio_bus_init+0x0/0xc7 returned 0 after 0 usecs
[   26.902907] calling  ksphy_init+0x0/0x4d @ 1
[   26.902909] bus: 'mdio_bus': add driver Micrel KS8001
[   26.902963] bus: 'mdio_bus': add driver Micrel VSC8201
[   26.903016] bus: 'mdio_bus': add driver Micrel KSZ9021 Gigabit PHY
[   26.903072] initcall ksphy_init+0x0/0x4d returned 0 after 0 usecs
[   26.903075] calling  e1000_init_module+0x0/0x6e @ 1
[   26.903078] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
[   26.903080] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   26.903088] bus: 'pci': add driver e1000
[   26.903162] initcall e1000_init_module+0x0/0x6e returned 0 after 0 usecs
[   26.903165] calling  e1000_init_module+0x0/0x2f @ 1
[   26.903167] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4
[   26.903169] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[   26.903177] bus: 'pci': add driver e1000e
[   26.903180] initcall e1000_init_module+0x0/0x2f returned 0 after 0 usecs
[   26.903180] calling  igbvf_init_module+0x0/0x53 @ 1
[   26.903180] Intel(R) Virtual Function Network Driver - version 1.0.0-k0
[   26.903180] Copyright (c) 2009 Intel Corporation.
[   26.903180] bus: 'pci': add driver igbvf
[   26.903180] initcall igbvf_init_module+0x0/0x53 returned 0 after 0 usecs
[   26.903180] calling  ixgbevf_init_module+0x0/0x39 @ 1
[   26.903180] ixgbevf: Intel(R) 82599 Virtual Function - version 1.0.0-k0
[   26.903180] Copyright (c) 2009 Intel Corporation.
[   26.903180] bus: 'pci': add driver ixgbevf
[   26.903180] initcall ixgbevf_init_module+0x0/0x39 returned 0 after 0 usecs
[   26.903180] calling  ixgb_init_module+0x0/0x39 @ 1
[   26.903180] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[   26.903180] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[   26.903180] bus: 'pci': add driver ixgb
[   26.903180] initcall ixgb_init_module+0x0/0x39 returned 0 after 0 usecs
[   26.903180] calling  ipg_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver Sundance Technology IPG Triple-Speed Ethernet
[   26.903180] initcall ipg_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  t1_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver cxgb
[   26.903180] initcall t1_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  cxgb3_init_module+0x0/0x1b @ 1
[   26.903180] bus: 'pci': add driver cxgb3
[   26.903180] initcall cxgb3_init_module+0x0/0x1b returned 0 after 0 usecs
[   26.903180] calling  cxgb4_init_module+0x0/0x4c @ 1
[   26.903180] bus: 'pci': add driver cxgb4
[   26.903180] initcall cxgb4_init_module+0x0/0x4c returned 0 after 0 usecs
[   26.903180] calling  atl1_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver atl1
[   26.903180] initcall atl1_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  atl2_init_module+0x0/0x39 @ 1
[   26.903180] Atheros(R) L2 Ethernet Driver - version 2.2.3
[   26.903180] Copyright (c) 2007 Atheros Corporation.
[   26.903180] bus: 'pci': add driver atl2
[   26.903180] initcall atl2_init_module+0x0/0x39 returned 0 after 0 usecs
[   26.903180] calling  atl1e_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver ATL1E
[   26.903180] initcall atl1e_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  bdx_module_init+0x0/0x6d @ 1
[   26.903180] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[   26.903180] tehuti: Options: hw_csum 
[   26.903180] bus: 'pci': add driver tehuti
[   26.903180] initcall bdx_module_init+0x0/0x6d returned 0 after 0 usecs
[   26.903180] calling  enic_init_module+0x0/0x2a @ 1
[   26.903180] enic: Cisco VIC Ethernet NIC Driver, ver 1.3.1.1-pp
[   26.903180] bus: 'pci': add driver enic
[   26.903180] initcall enic_init_module+0x0/0x2a returned 0 after 0 usecs
[   26.903180] calling  vmxnet3_init_module+0x0/0x2a @ 1
[   26.903180] VMware vmxnet3 virtual NIC driver - version 1.0.5.0-k-NAPI
[   26.903180] bus: 'pci': add driver vmxnet3
[   26.903180] initcall vmxnet3_init_module+0x0/0x2a returned 0 after 0 usecs
[   26.903180] calling  plip_init+0x0/0x52 @ 1
[   26.903180] initcall plip_init+0x0/0x52 returned 0 after 0 usecs
[   26.903180] calling  rr_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver rrunner
[   26.903180] initcall rr_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  happy_meal_probe+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver hme
[   26.903180] initcall happy_meal_probe+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  gem_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver gem
[   26.903180] initcall gem_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  cas_init+0x0/0x36 @ 1
[   26.903180] bus: 'pci': add driver cassini
[   26.903180] initcall cas_init+0x0/0x36 returned 0 after 0 usecs
[   26.903180] calling  ne2k_pci_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver ne2k-pci
[   26.903180] initcall ne2k_pci_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  pcnet32_init_module+0x0/0x102 @ 1
[   26.903180] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[   26.903180] bus: 'pci': add driver pcnet32
[   26.903180] initcall pcnet32_init_module+0x0/0x102 returned 0 after 0 usecs
[   26.903180] calling  e100_init_module+0x0/0x4d @ 1
[   26.903180] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   26.903180] e100: Copyright(c) 1999-2006 Intel Corporation
[   26.903180] bus: 'pci': add driver e100
[   26.903180] initcall e100_init_module+0x0/0x4d returned 0 after 0 usecs
[   26.903180] calling  epic_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver epic100
[   26.903180] initcall epic_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  sis900_init_module+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver sis900
[   26.903180] initcall sis900_init_module+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  r6040_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver r6040
[   26.903180] initcall r6040_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  yellowfin_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver yellowfin
[   26.903180] initcall yellowfin_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  acenic_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver acenic
[   26.903180] initcall acenic_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  natsemi_init_mod+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver natsemi
[   26.903180] initcall natsemi_init_mod+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  ns83820_init+0x0/0x20 @ 1
[   26.903180] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[   26.903180] bus: 'pci': add driver ns83820
[   26.903180] initcall ns83820_init+0x0/0x20 returned 0 after 0 usecs
[   26.903180] calling  tg3_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver tg3
[   26.903180] initcall tg3_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  bnx2_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver bnx2
[   26.903180] initcall bnx2_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  cnic_init+0x0/0x32 @ 1
[   26.903180] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
[   26.903180] initcall cnic_init+0x0/0x32 returned 0 after 0 usecs
[   26.903180] calling  bnx2x_init+0x0/0x7a @ 1
[   26.903180] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.52.53-1 (2010/18/04)
[   26.903180] bus: 'pci': add driver bnx2x
[   26.903180] initcall bnx2x_init+0x0/0x7a returned 0 after 0 usecs
[   26.903180] calling  skge_init_module+0x0/0x49 @ 1
[   26.903180] bus: 'pci': add driver skge
[   26.903180] initcall skge_init_module+0x0/0x49 returned 0 after 0 usecs
[   26.903180] calling  sky2_init_module+0x0/0x20 @ 1
[   26.903180] sky2: driver version 1.28
[   26.903180] bus: 'pci': add driver sky2
[   26.903180] initcall sky2_init_module+0x0/0x20 returned 0 after 0 usecs
[   26.903180] calling  ks8842_init+0x0/0xf @ 1
[   26.903180] bus: 'platform': add driver ks8842
[   26.903180] initcall ks8842_init+0x0/0xf returned 0 after 0 usecs
[   26.903180] calling  rhine_init+0x0/0x54 @ 1
[   26.903180] bus: 'pci': add driver via-rhine
[   26.903180] initcall rhine_init+0x0/0x54 returned 0 after 0 usecs
[   26.903180] calling  velocity_init_module+0x0/0x34 @ 1
[   26.903180] bus: 'pci': add driver via-velocity
[   26.903180] initcall velocity_init_module+0x0/0x34 returned 0 after 0 usecs
[   26.903180] calling  sundance_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver sundance
[   26.903180] initcall sundance_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  hamachi_init+0x0/0x16 @ 1
[   26.903180] bus: 'pci': add driver hamachi
[   26.903180] initcall hamachi_init+0x0/0x16 returned 0 after 0 usecs
[   26.903180] calling  net_olddevs_init+0x0/0x82 @ 1
[   26.903180] cs89x0:cs89x0_probe(0x0)
[   26.903180] PP_addr at 300[a]: 0xffff
[   26.903180] eth0: incorrect signature at 300[c]: 0xffff!=0x630E
[   26.903180] cs89x0: request_region(0x320, 0x10) failed
[   26.903180] PP_addr at 340[a]: 0xffff
[   26.903180] eth0: incorrect signature at 340[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 360[a]: 0xffff
[   26.903180] eth0: incorrect signature at 360[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 200[a]: 0xffff
[   26.903180] eth0: incorrect signature at 200[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 220[a]: 0xffff
[   26.903180] eth0: incorrect signature at 220[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 240[a]: 0xffff
[   26.903180] eth0: incorrect signature at 240[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 260[a]: 0xffff
[   26.903180] eth0: incorrect signature at 260[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 280[a]: 0xffff
[   26.903180] eth0: incorrect signature at 280[c]: 0xffff!=0x630E
[   26.903180] PP_addr at 2a0[a]: 0xffff
[   26.903180] eth0: incorrect signature at 2a0[c]: 0xffff!=0x630E
[   26.903184] PP_addr at 2c0[a]: 0xffff
[   26.903190] eth0: incorrect signature at 2c0[c]: 0xffff!=0x630E
[   26.903197] PP_addr at 2e0[a]: 0xffff
[   26.903203] eth0: incorrect signature at 2e0[c]: 0xffff!=0x630E
[   26.903213] cs89x0: no cs8900 or cs8920 detected.  Be sure to disable PnP with SETUP
[   26.903446] D-Link DE-620 pocket adapter not identified in the printer port
[   26.903504] initcall net_olddevs_init+0x0/0x82 returned 0 after 0 usecs
[   26.903507] calling  b44_init+0x0/0x55 @ 1
[   26.903517] bus: 'pci': add driver b44
[   26.903581] bus: 'ssb': add driver b44
[   26.903634] initcall b44_init+0x0/0x55 returned 0 after 0 usecs
[   26.903637] calling  init_nic+0x0/0x16 @ 1
[   26.903646] bus: 'pci': add driver forcedeth
[   26.903658] bus: 'pci': driver_probe_device: matched device 0000:00:0a.0 with driver forcedeth
[   26.903661] bus: 'pci': really_probe: probing driver forcedeth with device 0000:00:0a.0
[   26.903670] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   26.903731] IOAPIC[0]: Set routing entry (2-11 -> 0x49 -> IRQ 37 Mode:1 Active:1)
[   26.903738] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 37
[   26.903750] forcedeth 0000:00:0a.0: setting latency timer to 64
[   26.903842] nv_probe: set workaround bit for reversed mac addr
[   26.904004] ata1.00: 488397168 sectors, multi 1: LBA48 
[   26.908022] ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[   26.936159] ata1.00: configured for UDMA/100
[   26.940007] async_waiting @ 119
[   26.943144] async_continuing @ 119 after 0 usec
[   26.944235] scsi 0:0:0:0: Direct-Access     ATA      HDS722525VLAT80  V36O PQ: 0 ANSI: 5
[   26.948009] device: 'target0:0:0': device_add
[   26.952012] PM: Adding info for No Bus:target0:0:0
[   26.956007] device: '0:0:0:0': device_add
[   26.960039] bus: 'scsi': add device 0:0:0:0
[   26.964013] PM: Adding info for scsi:0:0:0:0
[   26.968060] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver st
[   26.972002] bus: 'scsi': really_probe: probing driver st with device 0:0:0:0
[   26.976017] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver osst
[   26.980002] bus: 'scsi': really_probe: probing driver osst with device 0:0:0:0
[   26.984014] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd
[   26.988003] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
[   26.992038] device: '0:0:0:0': device_add
[   26.996027] PM: Adding info for No Bus:0:0:0:0
[   27.000056] driver: '0:0:0:0': driver_bound: bound to device 'sd'
[   27.000059] calling  3_sd_probe_async+0x0/0x1be @ 122
[   27.000196] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[   27.000370] sd 0:0:0:0: [sda] Write Protect is off
[   27.000373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   27.000444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   27.000455] device: 'sda': device_add
[   27.000498] PM: Adding info for No Bus:sda
[   27.000498]  sda:
[   27.000498] BUG: spinlock bad magic on CPU#1, async/2/122
[   27.000498]  lock: 7f8d6c3c, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[   27.000498] Pid: 122, comm: async/2 Not tainted 2.6.35-rc2-00131-g7908a9e #8184
[   27.000498] Call Trace:
[   27.000498]  [<41ba1a73>] ? printk+0x20/0x24
[   27.000498]  [<4134b647>] spin_bug+0x7c/0x87
[   27.000498]  [<4134b6e3>] do_raw_spin_lock+0x1e/0x123
[   27.000498]  [<41ba3ffa>] ? _raw_spin_lock_irqsave+0x12/0x20
[   27.000498]  [<41ba4002>] _raw_spin_lock_irqsave+0x1a/0x20
[   27.000498]  [<4133461b>] blkiocg_update_io_add_stats+0x25/0xfb
[   27.000498]  [<41335c5a>] ? cfq_prio_tree_add+0xb1/0xc1
[   27.000498]  [<41337a8c>] cfq_insert_request+0x8c/0x42b
[   27.000498]  [<41ba3fa1>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   27.000498]  [<41ba3fa1>] ? _raw_spin_unlock_irqrestore+0x17/0x23
[   27.000498]  [<41329125>] elv_insert+0x107/0x1a0
[   27.000498]  [<41329254>] __elv_add_request+0x96/0x9d
[   27.000498]  [<4132ba39>] ? drive_stat_acct+0x9d/0xc6
[   27.000498]  [<4132dc11>] __make_request+0x335/0x376
[   27.000501]  [<4132c5d3>] generic_make_request+0x336/0x39d
[   27.000506]  [<410ad4ca>] ? kmem_cache_alloc+0xa1/0x105
[   27.000510]  [<4108935d>] ? mempool_alloc_slab+0xe/0x10
[   27.000513]  [<4108935d>] ? mempool_alloc_slab+0xe/0x10
[   27.000517]  [<4108935d>] ? mempool_alloc_slab+0xe/0x10
[   27.000520]  [<4108941f>] ? mempool_alloc+0x57/0xe2
[   27.000524]  [<4132c6b1>] submit_bio+0x77/0x8f
[   27.000528]  [<410d2d48>] ? bio_alloc_bioset+0x37/0x94
[   27.000531]  [<410cec1c>] submit_bh+0xc3/0xe2
[   27.000535]  [<410d1500>] block_read_full_page+0x249/0x259
[   27.000538]  [<410d3287>] ? blkdev_get_block+0x0/0xc6
[   27.000542]  [<41087cd2>] ? add_to_page_cache_locked+0x94/0xb5
[   27.000545]  [<410d3e1e>] blkdev_readpage+0xf/0x11
[   27.000549]  [<410888fb>] do_read_cache_page+0x7d/0x11a
[   27.000552]  [<410d3e0f>] ? blkdev_readpage+0x0/0x11
[   27.000555]  [<410889cc>] read_cache_page_async+0x16/0x1b
[   27.000559]  [<410889dc>] read_cache_page+0xb/0x12
[   27.000563]  [<410e8171>] read_dev_sector+0x2a/0x63
[   27.000566]  [<410e9378>] adfspart_check_ICS+0x2e/0x166
[   27.000569]  [<41ba1a73>] ? printk+0x20/0x24
[   27.000573]  [<410e8db3>] rescan_partitions+0x196/0x3e4
[   27.000576]  [<41ba2af3>] ? __mutex_unlock_slowpath+0x98/0x9f
[   27.000580]  [<410e934a>] ? adfspart_check_ICS+0x0/0x166
[   27.000583]  [<410d4303>] __blkdev_get+0x1e7/0x292
[   27.000587]  [<4133a0d9>] ? kobject_put+0x14/0x16
[   27.000591]  [<410d43b8>] blkdev_get+0xa/0xc
[   27.000594]  [<410e828b>] register_disk+0x94/0xe5
[   27.000597]  [<41332572>] ? blk_register_region+0x1b/0x20
[   27.000601]  [<413326c1>] add_disk+0x57/0x95
[   27.000604]  [<41331e72>] ? exact_match+0x0/0x8
[   27.000607]  [<413321eb>] ? exact_lock+0x0/0x11
[   27.000610]  [<416436e0>] sd_probe_async+0x108/0x1be
[   27.000615]  [<41048489>] async_thread+0xf5/0x1e6
[   27.000619]  [<4102c9d7>] ? default_wake_function+0x0/0xd
[   27.000623]  [<41048394>] ? async_thread+0x0/0x1e6
[   27.000628]  [<4104304b>] kthread+0x5f/0x64
[   27.000631]  [<41042fec>] ? kthread+0x0/0x64
[   27.000635]  [<41002ce6>] kernel_thread_helper+0x6/0x10
[   27.000698]  sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[   27.000698] device: 'sda1': device_add
[   27.000698] PM: Adding info for No Bus:sda1
[   27.000698] device: 'sda2': device_add
[   27.000698] PM: Adding info for No Bus:sda2
[   27.000698] device: 'sda3': device_add
[   27.000698] PM: Adding info for No Bus:sda3
[   27.000698] device: 'sda5': device_add
[   27.000698] PM: Adding info for No Bus:sda5
[   27.000698] device: 'sda6': device_add
[   27.000698] PM: Adding info for No Bus:sda6
[   27.000698] device: 'sda7': device_add
[   27.000698] PM: Adding info for No Bus:sda7
[   27.000698] device: 'sda8': device_add
[   27.000698] PM: Adding info for No Bus:sda8
[   27.000698] device: 'sda9': device_add
[   27.000698] PM: Adding info for No Bus:sda9
[   27.000698] device: 'sda10': device_add
[   27.000698] PM: Adding info for No Bus:sda10
[   27.004004] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
[   27.003997] device: '8:0': device_add
[   27.003997] PM: Adding info for No Bus:8:0
[   27.004046] sd 0:0:0:0: [sda] Attached SCSI disk
[   27.004051] initcall 3_sd_probe_async+0x0/0x1be returned 0 after 3906 usecs
[   27.008005] device: '0:0:0:0': device_add
[   27.012030] PM: Adding info for No Bus:0:0:0:0
[   27.016071] initcall 1_async_port_probe+0x0/0x9d returned 0 after 285156 usecs
[   27.020005] async_continuing @ 120 after 289062 usec
[   27.192221] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
[   27.196021] ata2: nv_mode_filter: 0x1f39f&0x73ff->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
[   27.220156] ata2.01: configured for UDMA/33
[   27.224057] async_waiting @ 120
[   27.228003] async_continuing @ 120 after 0 usec
[   27.232047] scsi 1:0:1:0: CD-ROM            DVDRW    IDE 16X          A079 PQ: 0 ANSI: 5
[   27.240017] device: 'target1:0:1': device_add
[   27.244011] PM: Adding info for No Bus:target1:0:1
[   27.248008] device: '1:0:1:0': device_add
[   27.252039] bus: 'scsi': add device 1:0:1:0
[   27.256013] PM: Adding info for scsi:1:0:1:0
[   27.260059] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver st
[   27.268002] bus: 'scsi': really_probe: probing driver st with device 1:0:1:0
[   27.276017] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver osst
[   27.284002] bus: 'scsi': really_probe: probing driver osst with device 1:0:1:0
[   27.292015] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sd
[   27.300002] bus: 'scsi': really_probe: probing driver sd with device 1:0:1:0
[   27.304015] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sr
[   27.312002] bus: 'scsi': really_probe: probing driver sr with device 1:0:1:0
[   27.324025] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[   27.332005] Uniform CD-ROM driver Revision: 3.20
[   27.336007] device: 'sr0': device_add
[   27.340062] PM: Adding info for No Bus:sr0
[   27.344124] device: '11:0': device_add
[   27.348025] PM: Adding info for No Bus:11:0
[   27.352064] sr 1:0:1:0: Attached scsi CD-ROM sr0
[   27.356002] driver: '1:0:1:0': driver_bound: bound to device 'sr'
[   27.360003] bus: 'scsi': really_probe: bound device 1:0:1:0 to driver sr
[   27.368004] device: '1:0:1:0': device_add
[   27.372018] PM: Adding info for No Bus:1:0:1:0
[   27.376070] initcall 2_async_port_probe+0x0/0x9d returned 0 after 636718 usecs
[   27.420191] device: 'eth0': device_add
[   27.424031] PM: Adding info for No Bus:eth0
[   27.428145] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
[   27.436004] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[   27.440002] driver: '0000:00:0a.0': driver_bound: bound to device 'forcedeth'
[   27.448003] bus: 'pci': really_probe: bound device 0000:00:0a.0 to driver forcedeth
[   27.456062] initcall init_nic+0x0/0x16 returned 0 after 542968 usecs
[   27.464003] calling  qlcnic_init_module+0x0/0x39 @ 1
[   27.468002] QLogic Converged Ethernet Driver v5.0.2
[   27.472016] bus: 'pci': add driver qlcnic
[   27.476086] initcall qlcnic_init_module+0x0/0x39 returned 0 after 7812 usecs
[   27.484003] calling  qlge_init_module+0x0/0x16 @ 1
[   27.488010] bus: 'pci': add driver qlge
[   27.492062] initcall qlge_init_module+0x0/0x16 returned 0 after 3906 usecs
[   27.500003] calling  ppp_init+0x0/0xc3 @ 1
[   27.504002] PPP generic driver version 2.4.2
[   27.508030] device class 'ppp': registering
[   27.512062] device: 'ppp': device_add
[   27.516194] PM: Adding info for No Bus:ppp
[   27.520055] initcall ppp_init+0x0/0xc3 returned 0 after 15625 usecs
[   27.524003] calling  ppp_async_init+0x0/0x2d @ 1
[   27.532004] initcall ppp_async_init+0x0/0x2d returned 0 after 0 usecs
[   27.536003] calling  deflate_init+0x0/0x30 @ 1
[   27.540003] PPP Deflate Compression module registered
[   27.548004] initcall deflate_init+0x0/0x30 returned 0 after 7812 usecs
[   27.552003] calling  bsdcomp_init+0x0/0x26 @ 1
[   27.556002] PPP BSD Compression module registered
[   27.564003] initcall bsdcomp_init+0x0/0x26 returned 0 after 7812 usecs
[   27.568003] calling  pppox_init+0x0/0xf @ 1
[   27.572002] NET: Registered protocol family 24
[   27.576003] initcall pppox_init+0x0/0xf returned 0 after 3906 usecs
[   27.584003] calling  pppoe_init+0x0/0x71 @ 1
[   27.588018] initcall pppoe_init+0x0/0x71 returned 0 after 0 usecs
[   27.592003] calling  slip_init+0x0/0x99 @ 1
[   27.600002] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[   27.608002] CSLIP: code copyright 1989 Regents of the University of California.
[   27.616007] initcall slip_init+0x0/0x99 returned 0 after 15625 usecs
[   27.620003] calling  dummy_init_module+0x0/0x96 @ 1
[   27.628028] device: 'dummy0': device_add
[   27.632081] PM: Adding info for No Bus:dummy0
[   27.636135] initcall dummy_init_module+0x0/0x96 returned 0 after 7812 usecs
[   27.640003] calling  macvlan_init_module+0x0/0x45 @ 1
[   27.648005] initcall macvlan_init_module+0x0/0x45 returned 0 after 0 usecs
[   27.652004] calling  macvtap_init+0x0/0xa4 @ 1
[   27.660006] device class 'macvtap': registering
[   27.664058] initcall macvtap_init+0x0/0xa4 returned 0 after 3906 usecs
[   27.668003] calling  rtl8139_init_module+0x0/0x16 @ 1
[   27.676013] bus: 'pci': add driver 8139too
[   27.680022] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139too
[   27.688002] bus: 'pci': really_probe: probing driver 8139too with device 0000:05:07.0
[   27.696008] 8139too: 8139too Fast Ethernet driver 0.9.28
[   27.700047] 8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 37
[   27.708252] device: 'eth1': device_add
[   27.712085] PM: Adding info for No Bus:eth1
[   27.716130] 8139too 0000:05:07.0: eth1: RealTek RTL8139 at 0x80dfc000, 00:c0:df:03:68:5d, IRQ 37
[   27.724003] driver: '0000:05:07.0': driver_bound: bound to device '8139too'
[   27.732003] bus: 'pci': really_probe: bound device 0000:05:07.0 to driver 8139too
[   27.740055] initcall rtl8139_init_module+0x0/0x16 returned 0 after 62500 usecs
[   27.744003] calling  atp_init_module+0x0/0x81 @ 1
[   27.752002] atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@scyld.com>
[   27.756034] initcall atp_init_module+0x0/0x81 returned -19 after 3906 usecs
[   27.764005] calling  sc92031_init+0x0/0x16 @ 1
[   27.768011] bus: 'pci': add driver sc92031
[   27.772065] initcall sc92031_init+0x0/0x16 returned 0 after 3906 usecs
[   27.780003] calling  eql_init_module+0x0/0x50 @ 1
[   27.784002] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[   27.792019] device: 'eql': device_add
[   27.796120] PM: Adding info for No Bus:eql
[   27.800130] initcall eql_init_module+0x0/0x50 returned 0 after 15625 usecs
[   27.808009] calling  tun_init+0x0/0x79 @ 1
[   27.812003] tun: Universal TUN/TAP device driver, 1.6
[   27.816002] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   27.824022] device: 'tun': device_add
[   27.828201] PM: Adding info for No Bus:tun
[   27.832064] initcall tun_init+0x0/0x79 returned 0 after 19531 usecs
[   27.836003] calling  veth_init+0x0/0xf @ 1
[   27.840005] initcall veth_init+0x0/0xf returned 0 after 0 usecs
[   27.844003] calling  rio_init+0x0/0x16 @ 1
[   27.848017] bus: 'pci': add driver dl2k
[   27.852085] initcall rio_init+0x0/0x16 returned 0 after 3906 usecs
[   27.856003] calling  rtl8169_init_module+0x0/0x16 @ 1
[   27.860010] bus: 'pci': add driver r8169
[   27.864064] initcall rtl8169_init_module+0x0/0x16 returned 0 after 3906 usecs
[   27.868003] calling  amd8111e_init+0x0/0x16 @ 1
[   27.872010] bus: 'pci': add driver amd8111e
[   27.876063] initcall amd8111e_init+0x0/0x16 returned 0 after 3906 usecs
[   27.880003] calling  myri10ge_init_module+0x0/0x5b @ 1
[   27.884002] myri10ge: Version 1.5.2-1.459
[   27.888013] bus: 'pci': add driver myri10ge
[   27.892063] initcall myri10ge_init_module+0x0/0x5b returned 0 after 7812 usecs
[   27.896003] calling  mlx4_init+0x0/0x93 @ 1
[   27.900059] bus: 'pci': add driver mlx4_core
[   27.904071] initcall mlx4_init+0x0/0x93 returned 0 after 3906 usecs
[   27.912003] calling  mlx4_en_init+0x0/0xf @ 1
[   27.916004] initcall mlx4_en_init+0x0/0xf returned 0 after 0 usecs
[   27.924003] calling  ethoc_init+0x0/0xf @ 1
[   27.928005] bus: 'platform': add driver ethoc
[   27.932060] initcall ethoc_init+0x0/0xf returned 0 after 3906 usecs
[   27.936003] calling  dnet_init+0x0/0xf @ 1
[   27.940003] bus: 'platform': add driver dnet
[   27.944055] initcall dnet_init+0x0/0xf returned 0 after 7812 usecs
[   27.952003] calling  olympic_pci_init+0x0/0x16 @ 1
[   27.956011] bus: 'pci': add driver olympic
[   27.960061] initcall olympic_pci_init+0x0/0x16 returned 0 after 3906 usecs
[   27.968003] calling  streamer_init_module+0x0/0x16 @ 1
[   27.972010] bus: 'pci': add driver lanstreamer
[   27.976061] initcall streamer_init_module+0x0/0x16 returned 0 after 3906 usecs
[   27.984003] calling  catc_init+0x0/0x2d @ 1
[   27.988003] bus: 'usb': add driver catc
[   27.992056] usbcore: registered new interface driver catc
[   28.000002] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[   28.004006] initcall catc_init+0x0/0x2d returned 0 after 15625 usecs
[   28.004013] async/2 used greatest stack depth: 1884 bytes left
[   28.016003] calling  kaweth_init+0x0/0x16 @ 1
[   28.020003] bus: 'usb': add driver kaweth
[   28.024067] usbcore: registered new interface driver kaweth
[   28.032004] initcall kaweth_init+0x0/0x16 returned 0 after 11718 usecs
[   28.036003] calling  usb_rtl8150_init+0x0/0x20 @ 1
[   28.040002] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[   28.048002] bus: 'usb': add driver rtl8150
[   28.052055] usbcore: registered new interface driver rtl8150
[   28.060004] initcall usb_rtl8150_init+0x0/0x20 returned 0 after 19531 usecs
[   28.064003] calling  asix_init+0x0/0x16 @ 1
[   28.068002] bus: 'usb': add driver asix
[   28.072065] usbcore: registered new interface driver asix
[   28.080004] initcall asix_init+0x0/0x16 returned 0 after 11718 usecs
[   28.084003] calling  cdc_init+0x0/0x16 @ 1
[   28.088002] bus: 'usb': add driver cdc_ether
[   28.092055] usbcore: registered new interface driver cdc_ether
[   28.100004] initcall cdc_init+0x0/0x16 returned 0 after 11718 usecs
[   28.104003] calling  dm9601_init+0x0/0x16 @ 1
[   28.112002] bus: 'usb': add driver dm9601
[   28.116055] usbcore: registered new interface driver dm9601
[   28.120004] initcall dm9601_init+0x0/0x16 returned 0 after 7812 usecs
[   28.128003] calling  smsc75xx_init+0x0/0x16 @ 1
[   28.132002] bus: 'usb': add driver smsc75xx
[   28.136064] usbcore: registered new interface driver smsc75xx
[   28.140004] initcall smsc75xx_init+0x0/0x16 returned 0 after 7812 usecs
[   28.148003] calling  smsc95xx_init+0x0/0x16 @ 1
[   28.152002] bus: 'usb': add driver smsc95xx
[   28.156054] usbcore: registered new interface driver smsc95xx
[   28.160004] initcall smsc95xx_init+0x0/0x16 returned 0 after 7812 usecs
[   28.168003] calling  usbnet_init+0x0/0x16 @ 1
[   28.172002] bus: 'usb': add driver gl620a
[   28.176064] usbcore: registered new interface driver gl620a
[   28.184004] initcall usbnet_init+0x0/0x16 returned 0 after 11718 usecs
[   28.188003] calling  net1080_init+0x0/0x16 @ 1
[   28.192002] bus: 'usb': add driver net1080
[   28.196054] usbcore: registered new interface driver net1080
[   28.204004] initcall net1080_init+0x0/0x16 returned 0 after 11718 usecs
[   28.208003] calling  cdc_subset_init+0x0/0x16 @ 1
[   28.216002] bus: 'usb': add driver cdc_subset
[   28.220054] usbcore: registered new interface driver cdc_subset
[   28.224004] initcall cdc_subset_init+0x0/0x16 returned 0 after 7812 usecs
[   28.232003] calling  mcs7830_init+0x0/0x16 @ 1
[   28.236002] bus: 'usb': add driver MOSCHIP usb-ethernet driver
[   28.244056] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   28.248003] initcall mcs7830_init+0x0/0x16 returned 0 after 11718 usecs
[   28.256003] calling  usbnet_init+0x0/0x24 @ 1
[   28.260007] initcall usbnet_init+0x0/0x24 returned 0 after 0 usecs
[   28.268003] calling  int51x1_init+0x0/0x16 @ 1
[   28.272002] bus: 'usb': add driver int51x1
[   28.276056] usbcore: registered new interface driver int51x1
[   28.280004] initcall int51x1_init+0x0/0x16 returned 0 after 7812 usecs
[   28.288003] calling  usbpn_init+0x0/0x16 @ 1
[   28.292002] bus: 'usb': add driver cdc_phonet
[   28.296054] usbcore: registered new interface driver cdc_phonet
[   28.300003] initcall usbpn_init+0x0/0x16 returned 0 after 7812 usecs
[   28.308003] calling  ipheth_init+0x0/0x2f @ 1
[   28.312002] bus: 'usb': add driver ipheth
[   28.316054] usbcore: registered new interface driver ipheth
[   28.324004] initcall ipheth_init+0x0/0x2f returned 0 after 11718 usecs
[   28.328003] calling  airo_init_module+0x0/0xce @ 1
[   28.332012] airo(): Probing for PCI adapters
[   28.336012] bus: 'pci': add driver airo
[   28.340071] airo(): Finished probing for PCI adapters
[   28.348004] initcall airo_init_module+0x0/0xce returned 0 after 15625 usecs
[   28.352003] calling  prism54_module_init+0x0/0x2a @ 1
[   28.360002] Loaded prism54 driver, version 1.2
[   28.364011] bus: 'pci': add driver prism54
[   28.368063] initcall prism54_module_init+0x0/0x2a returned 0 after 7812 usecs
[   28.376003] calling  init_netconsole+0x0/0x1cb @ 1
[   28.380005] console [netcon0] enabled
[   28.384005] netconsole: network logging started
[   28.388004] initcall init_netconsole+0x0/0x1cb returned 0 after 7812 usecs
[   28.396003] calling  efx_init_module+0x0/0xb3 @ 1
[   28.400001] Solarflare NET driver v3.0
[   28.404077] bus: 'pci': add driver sfc
[   28.408085] initcall efx_init_module+0x0/0xb3 returned 0 after 7812 usecs
[   28.412004] calling  zatm_init_module+0x0/0x16 @ 1
[   28.416012] bus: 'pci': add driver zatm
[   28.420065] initcall zatm_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.424028] calling  uPD98402_module_init+0x0/0x7 @ 1
[   28.428004] initcall uPD98402_module_init+0x0/0x7 returned 0 after 0 usecs
[   28.432003] calling  nicstar_init+0x0/0x5b @ 1
[   28.436011] bus: 'pci': add driver nicstar
[   28.440076] initcall nicstar_init+0x0/0x5b returned 0 after 3906 usecs
[   28.444004] calling  hrz_module_init+0x0/0xb1 @ 1
[   28.448003] Madge ATM Horizon [Ultra] driver version 1.2.1
[   28.452012] bus: 'pci': add driver horizon
[   28.456063] initcall hrz_module_init+0x0/0xb1 returned 0 after 7812 usecs
[   28.460006] calling  fore200e_module_init+0x0/0x20 @ 1
[   28.464002] fore200e: FORE Systems 200E-series ATM driver - version 0.3e
[   28.468011] bus: 'pci': add driver fore_200e
[   28.472063] initcall fore200e_module_init+0x0/0x20 returned 0 after 7812 usecs
[   28.476005] calling  eni_init+0x0/0x16 @ 1
[   28.480011] bus: 'pci': add driver eni
[   28.484062] initcall eni_init+0x0/0x16 returned 0 after 3906 usecs
[   28.488004] calling  idt77252_init+0x0/0x2a @ 1
[   28.492002] idt77252_init: at 4230ec71
[   28.496011] bus: 'pci': add driver idt77252
[   28.500063] initcall idt77252_init+0x0/0x2a returned 0 after 7812 usecs
[   28.504005] calling  solos_pci_init+0x0/0x25 @ 1
[   28.508002] Solos PCI Driver Version 0.07
[   28.512012] bus: 'pci': add driver solos
[   28.516072] initcall solos_pci_init+0x0/0x25 returned 0 after 7812 usecs
[   28.520004] calling  adummy_init+0x0/0xda @ 1
[   28.524002] adummy: version 1.0
[   28.527160] device: 'adummy0': device_add
[   28.528012] PM: Adding info for No Bus:adummy0
[   28.532070] initcall adummy_init+0x0/0xda returned 0 after 7812 usecs
[   28.536004] calling  atmtcp_init+0x0/0x11 @ 1
[   28.540004] initcall atmtcp_init+0x0/0x11 returned 0 after 0 usecs
[   28.544003] calling  i2o_iop_init+0x0/0x44 @ 1
[   28.548002] I2O subsystem v1.325
[   28.552002] i2o: max drivers = 8
[   28.555292] bus: 'i2o': registered
[   28.556045] bus: 'i2o': add driver exec-osm
[   28.560068] bus: 'pci': add driver PCI_I2O
[   28.564070] initcall i2o_iop_init+0x0/0x44 returned 0 after 15625 usecs
[   28.572003] calling  i2o_config_init+0x0/0x8c @ 1
[   28.576001] I2O Configuration OSM v1.323
[   28.580002] bus: 'i2o': add driver config-osm
[   28.584057] device: 'i2octl': device_add
[   28.588165] PM: Adding info for No Bus:i2octl
[   28.592053] initcall i2o_config_init+0x0/0x8c returned 0 after 15625 usecs
[   28.600003] calling  i2o_scsi_init+0x0/0x37 @ 1
[   28.604001] I2O SCSI Peripheral OSM v1.316
[   28.608002] bus: 'i2o': add driver scsi-osm
[   28.612054] initcall i2o_scsi_init+0x0/0x37 returned 0 after 7812 usecs
[   28.620005] calling  i2o_proc_init+0x0/0x1af @ 1
[   28.624002] I2O ProcFS OSM v1.316
[   28.628002] bus: 'i2o': add driver proc-osm
[   28.632064] initcall i2o_proc_init+0x0/0x1af returned 0 after 7812 usecs
[   28.640003] calling  fusion_init+0x0/0x10a @ 1
[   28.644002] Fusion MPT base driver 3.04.15
[   28.648001] Copyright (c) 1999-2008 LSI Corporation
[   28.652017] initcall fusion_init+0x0/0x10a returned 0 after 7812 usecs
[   28.660003] calling  mptspi_init+0x0/0xb9 @ 1
[   28.664002] Fusion MPT SPI Host driver 3.04.15
[   28.668017] bus: 'pci': add driver mptspi
[   28.672082] initcall mptspi_init+0x0/0xb9 returned 0 after 7812 usecs
[   28.680003] calling  mptsas_init+0x0/0xe5 @ 1
[   28.684002] Fusion MPT SAS Host driver 3.04.15
[   28.688025] bus: 'pci': add driver mptsas
[   28.692065] initcall mptsas_init+0x0/0xe5 returned 0 after 7812 usecs
[   28.696003] calling  mptctl_init+0x0/0x114 @ 1
[   28.704002] Fusion MPT misc device (ioctl) driver 3.04.15
[   28.708007] device: 'mptctl': device_add
[   28.712099] PM: Adding info for No Bus:mptctl
[   28.716049] mptctl: Registered with Fusion MPT base driver
[   28.720002] mptctl: /dev/mptctl @ (major,minor=10,220)
[   28.728004] initcall mptctl_init+0x0/0x114 returned 0 after 23437 usecs
[   28.732003] calling  fw_core_init+0x0/0x7b @ 1
[   28.736074] bus: 'firewire': registered
[   28.740012] initcall fw_core_init+0x0/0x7b returned 0 after 3906 usecs
[   28.748005] calling  fw_ohci_init+0x0/0x16 @ 1
[   28.752014] bus: 'pci': add driver firewire_ohci
[   28.756071] initcall fw_ohci_init+0x0/0x16 returned 0 after 3906 usecs
[   28.764003] calling  sbp2_init+0x0/0x39 @ 1
[   28.768039] bus: 'firewire': add driver sbp2
[   28.772059] initcall sbp2_init+0x0/0x39 returned 0 after 3906 usecs
[   28.776004] calling  fwnet_init+0x0/0x64 @ 1
[   28.780175] bus: 'firewire': add driver net
[   28.784055] initcall fwnet_init+0x0/0x64 returned 0 after 3906 usecs
[   28.788004] calling  uio_init+0x0/0x7 @ 1
[   28.792003] initcall uio_init+0x0/0x7 returned 0 after 0 usecs
[   28.796003] calling  hilscher_init_module+0x0/0x16 @ 1
[   28.800014] bus: 'pci': add driver hilscher
[   28.804069] initcall hilscher_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.808004] calling  uio_pdrv_init+0x0/0xf @ 1
[   28.812006] bus: 'platform': add driver uio_pdrv
[   28.816070] initcall uio_pdrv_init+0x0/0xf returned 0 after 3906 usecs
[   28.820003] calling  uio_pdrv_genirq_init+0x0/0xf @ 1
[   28.824004] bus: 'platform': add driver uio_pdrv_genirq
[   28.832004] initcall uio_pdrv_genirq_init+0x0/0xf returned 0 after 7812 usecs
[   28.836004] calling  sercos3_init_module+0x0/0x16 @ 1
[   28.840012] bus: 'pci': add driver sercos3
[   28.844065] initcall sercos3_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.848004] calling  init+0x0/0x20 @ 1
[   28.852002] Generic UIO driver for PCI 2.3 devices version: 0.01.0
[   28.856011] bus: 'pci': add driver uio_pci_generic
[   28.860063] initcall init+0x0/0x20 returned 0 after 7812 usecs
[   28.864003] calling  netx_init_module+0x0/0x16 @ 1
[   28.868011] bus: 'pci': add driver netx
[   28.872064] initcall netx_init_module+0x0/0x16 returned 0 after 3906 usecs
[   28.876003] calling  cdrom_init+0x0/0x7 @ 1
[   28.880003] initcall cdrom_init+0x0/0x7 returned 0 after 0 usecs
[   28.884004] calling  yenta_socket_init+0x0/0x16 @ 1
[   28.888012] bus: 'pci': add driver yenta_cardbus
[   28.892066] initcall yenta_socket_init+0x0/0x16 returned 0 after 3906 usecs
[   28.896004] calling  aoe_init+0x0/0x9d @ 1
[   28.900017] device class 'aoe': registering
[   28.904062] device: 'err': device_add
[   28.908169] PM: Adding info for No Bus:err
[   28.912056] device: 'discover': device_add
[   28.916073] PM: Adding info for No Bus:discover
[   28.920056] device: 'interfaces': device_add
[   28.924097] PM: Adding info for No Bus:interfaces
[   28.928058] device: 'revalidate': device_add
[   28.932077] PM: Adding info for No Bus:revalidate
[   28.936055] device: 'flush': device_add
[   28.940072] PM: Adding info for No Bus:flush
[   28.944219] aoe: AoE v47 initialised.
[   28.948049] initcall aoe_init+0x0/0x9d returned 0 after 46875 usecs
[   28.952003] calling  uwb_subsys_init+0x0/0x46 @ 1
[   28.956005] device class 'uwb_rc': registering
[   28.960074] initcall uwb_subsys_init+0x0/0x46 returned 0 after 3906 usecs
[   28.964003] calling  wlp_subsys_init+0x0/0x7 @ 1
[   28.968005] initcall wlp_subsys_init+0x0/0x7 returned 0 after 0 usecs
[   28.972003] calling  umc_bus_init+0x0/0xf @ 1
[   28.976064] bus: 'umc': registered
[   28.980004] initcall umc_bus_init+0x0/0xf returned 0 after 3906 usecs
[   28.984003] calling  whci_init+0x0/0x16 @ 1
[   28.988015] bus: 'pci': add driver whci
[   28.992076] initcall whci_init+0x0/0x16 returned 0 after 3906 usecs
[   28.996003] calling  whcrc_driver_init+0x0/0x16 @ 1
[   29.000002] bus: 'umc': add driver whc-rc
[   29.004064] initcall whcrc_driver_init+0x0/0x16 returned 0 after 3906 usecs
[   29.008004] calling  hwarc_driver_init+0x0/0x16 @ 1
[   29.012004] bus: 'usb': add driver hwa-rc
[   29.016059] usbcore: registered new interface driver hwa-rc
[   29.020004] initcall hwarc_driver_init+0x0/0x16 returned 0 after 7812 usecs
[   29.024005] calling  i1480_dfu_driver_init+0x0/0x16 @ 1
[   29.028003] bus: 'usb': add driver i1480-dfu-usb
[   29.032055] usbcore: registered new interface driver i1480-dfu-usb
[   29.036004] initcall i1480_dfu_driver_init+0x0/0x16 returned 0 after 7812 usecs
[   29.040004] calling  i1480_est_init+0x0/0x73 @ 1
[   29.044006] initcall i1480_est_init+0x0/0x73 returned 0 after 0 usecs
[   29.048004] calling  i1480u_driver_init+0x0/0x16 @ 1
[   29.052003] bus: 'usb': add driver i1480u_wlp
[   29.056056] usbcore: registered new interface driver i1480u_wlp
[   29.060004] initcall i1480u_driver_init+0x0/0x16 returned 0 after 7812 usecs
[   29.064004] calling  gpio_vbus_init+0x0/0x14 @ 1
[   29.068005] bus: 'platform': add driver gpio-vbus
[   29.072059] bus: 'platform': remove driver gpio-vbus
[   29.076051] driver: 'gpio-vbus': driver_release
[   29.080008] initcall gpio_vbus_init+0x0/0x14 returned -19 after 11718 usecs
[   29.084003] calling  mon_init+0x0/0xee @ 1
[   29.088011] device class 'usbmon': registering
[   29.092085] device: 'usbmon0': device_add
[   29.096144] PM: Adding info for No Bus:usbmon0
[   29.100058] initcall mon_init+0x0/0xee returned 0 after 11718 usecs
[   29.104003] calling  ehci_hcd_init+0x0/0xa4 @ 1
[   29.108002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   29.112016] bus: 'pci': add driver ehci_hcd
[   29.116020] bus: 'pci': driver_probe_device: matched device 0000:00:02.1 with driver ehci_hcd
[   29.120002] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:02.1
[   29.124041] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
[   29.128003] ehci_hcd 0000:00:02.1: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.1 setup!
[   29.132012] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
[   29.136070] initcall ehci_hcd_init+0x0/0xa4 returned 0 after 27343 usecs
[   29.140003] calling  oxu_module_init+0x0/0xf @ 1
[   29.144004] bus: 'platform': add driver oxu210hp-hcd
[   29.148061] initcall oxu_module_init+0x0/0xf returned 0 after 3906 usecs
[   29.152003] calling  ohci_hcd_mod_init+0x0/0xa1 @ 1
[   29.156002] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   29.160013] bus: 'pci': add driver ohci_hcd
[   29.164011] bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver ohci_hcd
[   29.168003] bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:00:02.0
[   29.172035] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
[   29.176002] ohci_hcd 0000:00:02.0: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.0 setup!
[   29.180012] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
[   29.184076] bus: 'platform': add driver sm501-usb
[   29.188058] initcall ohci_hcd_mod_init+0x0/0xa1 returned 0 after 31250 usecs
[   29.192003] calling  uhci_hcd_init+0x0/0xa4 @ 1
[   29.196003] uhci_hcd: USB Universal Host Controller Interface driver
[   29.200181] bus: 'pci': add driver uhci_hcd
[   29.204066] initcall uhci_hcd_init+0x0/0xa4 returned 0 after 7812 usecs
[   29.208005] calling  xhci_hcd_init+0x0/0x25 @ 1
[   29.212012] bus: 'pci': add driver xhci_hcd
[   29.216064] initcall xhci_hcd_init+0x0/0x25 returned 0 after 3906 usecs
[   29.220004] calling  sl811h_init+0x0/0x36 @ 1
[   29.224002] sl811: driver sl811-hcd, 19 May 2005
[   29.228004] bus: 'platform': add driver sl811-hcd
[   29.232056] initcall sl811h_init+0x0/0x36 returned 0 after 7812 usecs
[   29.236003] calling  c67x00_init+0x0/0xf @ 1
[   29.240003] bus: 'platform': add driver c67x00
[   29.244056] initcall c67x00_init+0x0/0xf returned 0 after 3906 usecs
[   29.248004] calling  wusbcore_init+0x0/0x66 @ 1
[   29.252086] initcall wusbcore_init+0x0/0x66 returned 0 after 0 usecs
[   29.260004] calling  acm_init+0x0/0xcb @ 1
[   29.264012] bus: 'usb': add driver cdc_acm
[   29.268062] usbcore: registered new interface driver cdc_acm
[   29.276002] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[   29.284004] initcall acm_init+0x0/0xcb returned 0 after 19531 usecs
[   29.288003] calling  usblp_init+0x0/0x16 @ 1
[   29.292003] bus: 'usb': add driver usblp
[   29.296056] usbcore: registered new interface driver usblp
[   29.304004] initcall usblp_init+0x0/0x16 returned 0 after 11718 usecs
[   29.308003] calling  wdm_init+0x0/0x16 @ 1
[   29.312003] bus: 'usb': add driver cdc_wdm
[   29.316066] usbcore: registered new interface driver cdc_wdm
[   29.324004] initcall wdm_init+0x0/0x16 returned 0 after 11718 usecs
[   29.328003] calling  usbtmc_init+0x0/0x2d @ 1
[   29.332003] bus: 'usb': add driver usbtmc
[   29.336056] usbcore: registered new interface driver usbtmc
[   29.344004] initcall usbtmc_init+0x0/0x2d returned 0 after 11718 usecs
[   29.348003] calling  usb_stor_init+0x0/0x42 @ 1
[   29.356002] Initializing USB Mass Storage driver...
[   29.360003] bus: 'usb': add driver usb-storage
[   29.364057] usbcore: registered new interface driver usb-storage
[   29.368002] USB Mass Storage support registered.
[   29.376004] initcall usb_stor_init+0x0/0x42 returned 0 after 19531 usecs
[   29.380003] calling  usb_usual_init+0x0/0x30 @ 1
[   29.384003] bus: 'usb': add driver libusual
[   29.388065] usbcore: registered new interface driver libusual
[   29.396004] initcall usb_usual_init+0x0/0x30 returned 0 after 11718 usecs
[   29.404003] calling  alauda_init+0x0/0x16 @ 1
[   29.408003] bus: 'usb': add driver ums-alauda
[   29.412056] usbcore: registered new interface driver ums-alauda
[   29.416004] initcall alauda_init+0x0/0x16 returned 0 after 7812 usecs
[   29.424003] calling  cypress_init+0x0/0x16 @ 1
[   29.428003] bus: 'usb': add driver ums-cypress
[   29.432056] usbcore: registered new interface driver ums-cypress
[   29.440004] initcall cypress_init+0x0/0x16 returned 0 after 11718 usecs
[   29.444003] calling  datafab_init+0x0/0x16 @ 1
[   29.448003] bus: 'usb': add driver ums-datafab
[   29.452056] usbcore: registered new interface driver ums-datafab
[   29.460004] initcall datafab_init+0x0/0x16 returned 0 after 11718 usecs
[   29.468003] calling  freecom_init+0x0/0x16 @ 1
[   29.472003] bus: 'usb': add driver ums-freecom
[   29.476065] usbcore: registered new interface driver ums-freecom
[   29.480004] initcall freecom_init+0x0/0x16 returned 0 after 7812 usecs
[   29.488003] calling  isd200_init+0x0/0x16 @ 1
[   29.492003] bus: 'usb': add driver ums-isd200
[   29.496056] usbcore: registered new interface driver ums-isd200
[   29.504005] initcall isd200_init+0x0/0x16 returned 0 after 11718 usecs
[   29.508003] calling  onetouch_init+0x0/0x16 @ 1
[   29.512003] bus: 'usb': add driver ums-onetouch
[   29.520056] usbcore: registered new interface driver ums-onetouch
[   29.524004] initcall onetouch_init+0x0/0x16 returned 0 after 11718 usecs
[   29.532003] calling  sddr09_init+0x0/0x16 @ 1
[   29.536003] bus: 'usb': add driver ums-sddr09
[   29.540067] usbcore: registered new interface driver ums-sddr09
[   29.544004] initcall sddr09_init+0x0/0x16 returned 0 after 7812 usecs
[   29.552003] calling  usbat_init+0x0/0x16 @ 1
[   29.556003] bus: 'usb': add driver ums-usbat
[   29.560056] usbcore: registered new interface driver ums-usbat
[   29.568004] initcall usbat_init+0x0/0x16 returned 0 after 11718 usecs
[   29.572003] calling  usb_mdc800_init+0x0/0x307 @ 1
[   29.580011] bus: 'usb': add driver mdc800
[   29.584031] usbcore: registered new interface driver mdc800
[   29.588002] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[   29.596004] initcall usb_mdc800_init+0x0/0x307 returned 0 after 15625 usecs
[   29.604003] calling  microtek_drv_init+0x0/0x16 @ 1
[   29.608003] bus: 'usb': add driver microtekX6
[   29.612056] usbcore: registered new interface driver microtekX6
[   29.616004] initcall microtek_drv_init+0x0/0x16 returned 0 after 7812 usecs
[   29.624003] calling  usb_serial_init+0x0/0x1cd @ 1
[   29.628081] bus: 'usb-serial': registered
[   29.632023] bus: 'usb': add driver usbserial
[   29.636056] usbcore: registered new interface driver usbserial
[   29.644002] usbserial: USB Serial Driver core
[   29.648004] initcall usb_serial_init+0x0/0x1cd returned 0 after 19531 usecs
[   29.656003] calling  aircable_init+0x0/0x3a @ 1
[   29.660003] bus: 'usb-serial': add driver aircable
[   29.664055] USB Serial support registered for aircable
[   29.668003] bus: 'usb': add driver aircable
[   29.672055] usbcore: registered new interface driver aircable
[   29.680004] initcall aircable_init+0x0/0x3a returned 0 after 19531 usecs
[   29.688003] calling  ark3116_init+0x0/0x4f @ 1
[   29.692002] bus: 'usb-serial': add driver ark3116
[   29.696054] USB Serial support registered for ark3116
[   29.700003] bus: 'usb': add driver ark3116
[   29.704055] usbcore: registered new interface driver ark3116
[   29.712002] ark3116:v0.6:USB ARK3116 serial/IrDA driver
[   29.716004] initcall ark3116_init+0x0/0x4f returned 0 after 23437 usecs
[   29.720003] calling  belkin_sa_init+0x0/0x49 @ 1
[   29.728002] bus: 'usb-serial': add driver belkin
[   29.732054] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[   29.740003] bus: 'usb': add driver belkin
[   29.744055] usbcore: registered new interface driver belkin
[   29.748002] belkin_sa: v1.3:USB Belkin Serial converter driver
[   29.756004] initcall belkin_sa_init+0x0/0x49 returned 0 after 27343 usecs
[   29.760004] calling  ch341_init+0x0/0x3a @ 1
[   29.768002] bus: 'usb-serial': add driver ch341-uart
[   29.772063] USB Serial support registered for ch341-uart
[   29.776004] bus: 'usb': add driver ch341
[   29.780055] usbcore: registered new interface driver ch341
[   29.784004] initcall ch341_init+0x0/0x3a returned 0 after 15625 usecs
[   29.792003] calling  cp210x_init+0x0/0x49 @ 1
[   29.796002] bus: 'usb-serial': add driver cp210x
[   29.800054] USB Serial support registered for cp210x
[   29.808006] bus: 'usb': add driver cp210x
[   29.812060] usbcore: registered new interface driver cp210x
[   29.816002] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[   29.824004] initcall cp210x_init+0x0/0x49 returned 0 after 27343 usecs
[   29.828003] calling  cyberjack_init+0x0/0x54 @ 1
[   29.832002] bus: 'usb-serial': add driver cyberjack
[   29.840054] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[   29.848003] bus: 'usb': add driver cyberjack
[   29.852055] usbcore: registered new interface driver cyberjack
[   29.856002] cyberjack: v1.01 Matthias Bruestle
[   29.860002] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[   29.868004] initcall cyberjack_init+0x0/0x54 returned 0 after 35156 usecs
[   29.876003] calling  cypress_init+0x0/0x9d @ 1
[   29.880002] bus: 'usb-serial': add driver earthmate
[   29.884054] USB Serial support registered for DeLorme Earthmate USB
[   29.892002] bus: 'usb-serial': add driver cyphidcom
[   29.896054] USB Serial support registered for HID->COM RS232 Adapter
[   29.904002] bus: 'usb-serial': add driver nokiaca42v2
[   29.908054] USB Serial support registered for Nokia CA-42 V2 Adapter
[   29.912003] bus: 'usb': add driver cypress
[   29.916073] usbcore: registered new interface driver cypress
[   29.924002] cypress_m8: v1.10:Cypress USB to Serial Driver
[   29.928004] initcall cypress_init+0x0/0x9d returned 0 after 46875 usecs
[   29.936003] calling  debug_init+0x0/0x3a @ 1
[   29.940002] bus: 'usb-serial': add driver debug
[   29.944054] USB Serial support registered for debug
[   29.948003] bus: 'usb': add driver debug
[   29.952055] usbcore: registered new interface driver debug
[   29.960004] initcall debug_init+0x0/0x3a returned 0 after 19531 usecs
[   29.964003] calling  edgeport_init+0x0/0xa5 @ 1
[   29.968002] bus: 'usb-serial': add driver edgeport_2
[   29.976054] USB Serial support registered for Edgeport 2 port adapter
[   29.980002] bus: 'usb-serial': add driver edgeport_4
[   29.988054] USB Serial support registered for Edgeport 4 port adapter
[   29.992002] bus: 'usb-serial': add driver edgeport_8
[   29.996054] USB Serial support registered for Edgeport 8 port adapter
[   30.004002] bus: 'usb-serial': add driver epic
[   30.008054] USB Serial support registered for EPiC device
[   30.016004] bus: 'usb': add driver io_edgeport
[   30.020055] usbcore: registered new interface driver io_edgeport
[   30.024002] io_edgeport: v2.7:Edgeport USB Serial Driver
[   30.028004] initcall edgeport_init+0x0/0xa5 returned 0 after 58593 usecs
[   30.036003] calling  edgeport_init+0x0/0x63 @ 1
[   30.040002] bus: 'usb-serial': add driver edgeport_ti_1
[   30.048064] USB Serial support registered for Edgeport TI 1 port adapter
[   30.052003] bus: 'usb-serial': add driver edgeport_ti_2
[   30.060054] USB Serial support registered for Edgeport TI 2 port adapter
[   30.064003] bus: 'usb': add driver io_ti
[   30.068055] usbcore: registered new interface driver io_ti
[   30.076002] io_ti: v0.7mode043006:Edgeport USB Serial Driver
[   30.080004] initcall edgeport_init+0x0/0x63 returned 0 after 39062 usecs
[   30.088003] calling  empeg_init+0x0/0x49 @ 1
[   30.092002] bus: 'usb-serial': add driver empeg
[   30.096066] USB Serial support registered for empeg
[   30.100004] bus: 'usb': add driver empeg
[   30.104055] usbcore: registered new interface driver empeg
[   30.112002] empeg: v1.3:USB Empeg Mark I/II Driver
[   30.116004] initcall empeg_init+0x0/0x49 returned 0 after 23437 usecs
[   30.120003] calling  funsoft_init+0x0/0x3a @ 1
[   30.124002] bus: 'usb-serial': add driver funsoft
[   30.132054] USB Serial support registered for funsoft
[   30.136003] bus: 'usb': add driver funsoft
[   30.140055] usbcore: registered new interface driver funsoft
[   30.144004] initcall funsoft_init+0x0/0x3a returned 0 after 19531 usecs
[   30.152003] calling  garmin_init+0x0/0x49 @ 1
[   30.156002] bus: 'usb-serial': add driver garmin_gps
[   30.160054] USB Serial support registered for Garmin GPS usb/tty
[   30.168003] bus: 'usb': add driver garmin_gps
[   30.172063] usbcore: registered new interface driver garmin_gps
[   30.176002] garmin_gps: v0.33:garmin gps driver
[   30.184004] initcall garmin_init+0x0/0x49 returned 0 after 27343 usecs
[   30.188003] calling  hp49gp_init+0x0/0x49 @ 1
[   30.192003] bus: 'usb-serial': add driver hp4X
[   30.196055] USB Serial support registered for hp4X
[   30.204003] bus: 'usb': add driver hp4X
[   30.208055] usbcore: registered new interface driver hp4X
[   30.212002] hp4x: v1.00:HP4x (48/49) Generic Serial driver
[   30.216004] initcall hp49gp_init+0x0/0x49 returned 0 after 23437 usecs
[   30.224003] calling  iuu_init+0x0/0x49 @ 1
[   30.228002] bus: 'usb-serial': add driver iuu_phoenix
[   30.232054] USB Serial support registered for iuu_phoenix
[   30.240003] bus: 'usb': add driver iuu_phoenix
[   30.244055] usbcore: registered new interface driver iuu_phoenix
[   30.248002] iuu_phoenix: v0.11:Infinity USB Unlimited Phoenix driver
[   30.256004] initcall iuu_init+0x0/0x49 returned 0 after 27343 usecs
[   30.260003] calling  keyspan_pda_init+0x0/0x7d @ 1
[   30.268002] bus: 'usb-serial': add driver keyspan_pda
[   30.272055] USB Serial support registered for Keyspan PDA
[   30.276003] bus: 'usb-serial': add driver keyspan_pda_pre
[   30.284054] USB Serial support registered for Keyspan PDA - (prerenumeration)
[   30.288002] bus: 'usb-serial': add driver xircom_no_firm
[   30.296054] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[   30.304003] bus: 'usb': add driver keyspan_pda
[   30.308056] usbcore: registered new interface driver keyspan_pda
[   30.312002] keyspan_pda: v1.1:USB Keyspan PDA Converter driver
[   30.320004] initcall keyspan_pda_init+0x0/0x7d returned 0 after 50781 usecs
[   30.328003] calling  klsi_105_init+0x0/0x49 @ 1
[   30.332002] bus: 'usb-serial': add driver kl5kusb105d
[   30.336064] USB Serial support registered for KL5KUSB105D / PalmConnect
[   30.344004] bus: 'usb': add driver kl5kusb105d
[   30.348055] usbcore: registered new interface driver kl5kusb105d
[   30.352002] kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
[   30.360004] initcall klsi_105_init+0x0/0x49 returned 0 after 27343 usecs
[   30.368003] calling  kobil_init+0x0/0x49 @ 1
[   30.372003] bus: 'usb-serial': add driver kobil
[   30.376055] USB Serial support registered for KOBIL USB smart card terminal
[   30.384003] bus: 'usb': add driver kobil
[   30.388064] usbcore: registered new interface driver kobil
[   30.392002] kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
[   30.400004] initcall kobil_init+0x0/0x49 returned 0 after 27343 usecs
[   30.408003] calling  mct_u232_init+0x0/0x49 @ 1
[   30.412003] bus: 'usb-serial': add driver mct_u232
[   30.416055] USB Serial support registered for MCT U232
[   30.420003] bus: 'usb': add driver mct_u232
[   30.424055] usbcore: registered new interface driver mct_u232
[   30.432002] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
[   30.440004] initcall mct_u232_init+0x0/0x49 returned 0 after 27343 usecs
[   30.444003] calling  moschip7720_init+0x0/0x67 @ 1
[   30.448003] bus: 'usb-serial': add driver moschip7720
[   30.456054] USB Serial support registered for Moschip 2 port adapter
[   30.460002] mos7720: 2.1:Moschip USB Serial Driver
[   30.468003] bus: 'usb': add driver moschip7720
[   30.472067] usbcore: registered new interface driver moschip7720
[   30.476005] initcall moschip7720_init+0x0/0x67 returned 0 after 27343 usecs
[   30.484003] calling  moto_init+0x0/0x3a @ 1
[   30.488003] bus: 'usb-serial': add driver moto-modem
[   30.492064] USB Serial support registered for moto-modem
[   30.500004] bus: 'usb': add driver moto-modem
[   30.504055] usbcore: registered new interface driver moto-modem
[   30.508004] initcall moto_init+0x0/0x3a returned 0 after 19531 usecs
[   30.516003] calling  navman_init+0x0/0x3a @ 1
[   30.520003] bus: 'usb-serial': add driver navman
[   30.524054] USB Serial support registered for navman
[   30.528004] bus: 'usb': add driver navman
[   30.532055] usbcore: registered new interface driver navman
[   30.540004] initcall navman_init+0x0/0x3a returned 0 after 19531 usecs
[   30.544003] calling  omninet_init+0x0/0x49 @ 1
[   30.548002] bus: 'usb-serial': add driver omninet
[   30.556055] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[   30.560003] bus: 'usb': add driver omninet
[   30.564055] usbcore: registered new interface driver omninet
[   30.572002] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
[   30.576004] initcall omninet_init+0x0/0x49 returned 0 after 27343 usecs
[   30.584003] calling  opticon_init+0x0/0x3a @ 1
[   30.588003] bus: 'usb-serial': add driver opticon
[   30.592055] USB Serial support registered for opticon
[   30.596003] bus: 'usb': add driver opticon
[   30.600055] usbcore: registered new interface driver opticon
[   30.608004] initcall opticon_init+0x0/0x3a returned 0 after 19531 usecs
[   30.612003] calling  option_init+0x0/0x49 @ 1
[   30.620003] bus: 'usb-serial': add driver option1
[   30.624075] USB Serial support registered for GSM modem (1-port)
[   30.628004] bus: 'usb': add driver option
[   30.632071] usbcore: registered new interface driver option
[   30.640002] option: v0.7.2:USB Driver for GSM modems
[   30.644004] initcall option_init+0x0/0x49 returned 0 after 23437 usecs
[   30.652003] calling  oti6858_init+0x0/0x3a @ 1
[   30.656003] bus: 'usb-serial': add driver oti6858
[   30.660062] USB Serial support registered for oti6858
[   30.664004] bus: 'usb': add driver oti6858
[   30.668056] usbcore: registered new interface driver oti6858
[   30.676004] initcall oti6858_init+0x0/0x3a returned 0 after 19531 usecs
[   30.680003] calling  qcaux_init+0x0/0x3a @ 1
[   30.684002] bus: 'usb-serial': add driver qcaux
[   30.688054] USB Serial support registered for qcaux
[   30.696003] bus: 'usb': add driver qcaux
[   30.700055] usbcore: registered new interface driver qcaux
[   30.704004] initcall qcaux_init+0x0/0x3a returned 0 after 19531 usecs
[   30.712003] calling  siemens_usb_mpi_init+0x0/0x54 @ 1
[   30.716003] bus: 'usb-serial': add driver siemens_mpi
[   30.720054] USB Serial support registered for siemens_mpi
[   30.728004] bus: 'usb': add driver siemens_mpi
[   30.732056] usbcore: registered new interface driver siemens_mpi
[   30.736002] Driver for Siemens USB/MPI adapter
[   30.740002] Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net
[   30.748004] initcall siemens_usb_mpi_init+0x0/0x54 returned 0 after 31250 usecs
[   30.756003] calling  sierra_init+0x0/0x49 @ 1
[   30.760003] bus: 'usb-serial': add driver sierra
[   30.764055] USB Serial support registered for Sierra USB modem
[   30.772004] bus: 'usb': add driver sierra
[   30.776064] usbcore: registered new interface driver sierra
[   30.780002] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[   30.788005] initcall sierra_init+0x0/0x49 returned 0 after 27343 usecs
[   30.792003] calling  symbol_init+0x0/0x3a @ 1
[   30.796003] bus: 'usb-serial': add driver symbol
[   30.804060] USB Serial support registered for symbol
[   30.808004] bus: 'usb': add driver symbol
[   30.812055] usbcore: registered new interface driver symbol
[   30.816008] initcall symbol_init+0x0/0x3a returned 0 after 19531 usecs
[   30.824003] calling  ti_init+0x0/0x12e @ 1
[   30.828003] bus: 'usb-serial': add driver ti_usb_3410_5052_1
[   30.832055] USB Serial support registered for TI USB 3410 1 port adapter
[   30.840003] bus: 'usb-serial': add driver ti_usb_3410_5052_2
[   30.844054] USB Serial support registered for TI USB 5052 2 port adapter
[   30.852004] bus: 'usb': add driver ti_usb_3410_5052
[   30.856055] usbcore: registered new interface driver ti_usb_3410_5052
[   30.864002] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[   30.872004] initcall ti_init+0x0/0x12e returned 0 after 42968 usecs
[   30.876004] calling  visor_init+0x0/0x15e @ 1
[   30.880003] bus: 'usb-serial': add driver visor
[   30.884064] USB Serial support registered for Handspring Visor / Palm OS
[   30.892003] bus: 'usb-serial': add driver clie_3.5
[   30.896054] USB Serial support registered for Sony Clie 3.5
[   30.904003] bus: 'usb-serial': add driver clie_5
[   30.908063] USB Serial support registered for Sony Clie 5.0
[   30.912004] bus: 'usb': add driver visor
[   30.916055] usbcore: registered new interface driver visor
[   30.924002] visor: USB HandSpring Visor / Palm OS driver
[   30.928004] initcall visor_init+0x0/0x15e returned 0 after 46875 usecs
[   30.936003] calling  vivopay_serial_init+0x0/0x49 @ 1
[   30.940003] bus: 'usb-serial': add driver vivopay-serial
[   30.944055] USB Serial support registered for vivopay-serial
[   30.952004] bus: 'usb': add driver vivopay-serial
[   30.956055] usbcore: registered new interface driver vivopay-serial
[   30.960002] vivopay_serial: v1.0:ViVOpay USB Serial Driver
[   30.968004] initcall vivopay_serial_init+0x0/0x49 returned 0 after 27343 usecs
[   30.972003] calling  zio_init+0x0/0x3a @ 1
[   30.976003] bus: 'usb-serial': add driver zio
[   30.984055] USB Serial support registered for zio
[   30.988004] bus: 'usb': add driver zio
[   30.992055] usbcore: registered new interface driver zio
[   30.996004] initcall zio_init+0x0/0x3a returned 0 after 19531 usecs
[   31.004003] calling  appledisplay_init+0x0/0x4b @ 1
[   31.008081] bus: 'usb': add driver appledisplay
[   31.012067] usbcore: registered new interface driver appledisplay
[   31.016005] initcall appledisplay_init+0x0/0x4b returned 0 after 7812 usecs
[   31.020004] calling  cypress_init+0x0/0x2f @ 1
[   31.024005] bus: 'usb': add driver cypress_cy7c63
[   31.028066] usbcore: registered new interface driver cypress_cy7c63
[   31.032006] initcall cypress_init+0x0/0x2f returned 0 after 7812 usecs
[   31.036003] calling  emi26_init+0x0/0x16 @ 1
[   31.040005] bus: 'usb': add driver emi26 - firmware loader
[   31.044061] usbcore: registered new interface driver emi26 - firmware loader
[   31.048005] initcall emi26_init+0x0/0x16 returned 0 after 7812 usecs
[   31.052003] calling  emi62_init+0x0/0x2d @ 1
[   31.056005] bus: 'usb': add driver emi62 - firmware loader
[   31.060069] usbcore: registered new interface driver emi62 - firmware loader
[   31.064004] initcall emi62_init+0x0/0x2d returned 0 after 7812 usecs
[   31.068004] calling  ftdi_elan_init+0x0/0x127 @ 1
[   31.072002] driver ftdi-elan built at 12:25:45 on Jun 11 2010
[   31.076047] bus: 'usb': add driver ftdi-elan
[   31.080062] usbcore: registered new interface driver ftdi-elan
[   31.088004] initcall ftdi_elan_init+0x0/0x127 returned 0 after 15625 usecs
[   31.092003] calling  usb_idmouse_init+0x0/0x3a @ 1
[   31.096002] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
[   31.104004] bus: 'usb': add driver idmouse
[   31.108057] usbcore: registered new interface driver idmouse
[   31.112004] initcall usb_idmouse_init+0x0/0x3a returned 0 after 15625 usecs
[   31.120003] calling  iowarrior_init+0x0/0x16 @ 1
[   31.124004] bus: 'usb': add driver iowarrior
[   31.128067] usbcore: registered new interface driver iowarrior
[   31.136004] initcall iowarrior_init+0x0/0x16 returned 0 after 11718 usecs
[   31.144003] calling  isight_firmware_init+0x0/0x16 @ 1
[   31.148004] bus: 'usb': add driver isight_firmware
[   31.152057] usbcore: registered new interface driver isight_firmware
[   31.160004] initcall isight_firmware_init+0x0/0x16 returned 0 after 11718 usecs
[   31.168003] calling  tv_init+0x0/0x3c @ 1
[   31.172004] bus: 'usb': add driver trancevibrator
[   31.176056] usbcore: registered new interface driver trancevibrator
[   31.180002] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
[   31.188004] initcall tv_init+0x0/0x3c returned 0 after 15625 usecs
[   31.192003] calling  uss720_init+0x0/0x4d @ 1
[   31.200004] bus: 'usb': add driver uss720
[   31.204053] usbcore: registered new interface driver uss720
[   31.208002] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[   31.216001] uss720: NOTE: this is a special purpose driver to allow nonstandard
[   31.224001] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[   31.232001] uss720: If you just want to connect to a printer, use usblp instead
[   31.240004] initcall uss720_init+0x0/0x4d returned 0 after 39062 usecs
[   31.244003] calling  usb_sevseg_init+0x0/0x2f @ 1
[   31.252004] bus: 'usb': add driver usbsevseg
[   31.256056] usbcore: registered new interface driver usbsevseg
[   31.260004] initcall usb_sevseg_init+0x0/0x2f returned 0 after 7812 usecs
[   31.268003] calling  usb_sisusb_init+0x0/0x16 @ 1
[   31.272004] bus: 'usb': add driver sisusb
[   31.276056] usbcore: registered new interface driver sisusb
[   31.280004] initcall usb_sisusb_init+0x0/0x16 returned 0 after 7812 usecs
[   31.288003] calling  i8042_init+0x0/0x31b @ 1
[   31.292004] bus: 'pnp': add driver i8042 kbd
[   31.296054] bus: 'pnp': add driver i8042 aux
[   31.300059] bus: 'pnp': remove driver i8042 kbd
[   31.304050] driver: 'i8042 kbd': driver_release
[   31.312010] bus: 'pnp': remove driver i8042 aux
[   31.316049] driver: 'i8042 aux': driver_release
[   31.320005] PNP: No PS/2 controller found. Probing ports directly.
[   31.324030] Registering platform device 'i8042'. Parent at platform
[   31.332004] device: 'i8042': device_add
[   31.336008] bus: 'platform': add device i8042
[   31.340014] PM: Adding info for platform:i8042
[   31.344066] bus: 'platform': add driver i8042
[   31.348014] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
[   31.356002] bus: 'platform': really_probe: probing driver i8042 with device i8042
[   31.893201] serio: i8042 KBD port at 0x60,0x64 irq 1
[   31.896019] serio: i8042 AUX port at 0x60,0x64 irq 12
[   31.896017] device: 'serio0': device_add
[   31.896023] bus: 'serio': add device serio0
[   31.896040] PM: Adding info for serio:serio0
[   31.916008] driver: 'i8042': driver_bound: bound to device 'i8042'
[   31.916005] device: 'serio1': device_add
[   31.916017] bus: 'serio': add device serio1
[   31.916041] PM: Adding info for serio:serio1
[   31.932003] bus: 'platform': really_probe: bound device i8042 to driver i8042
[   31.940054] initcall i8042_init+0x0/0x31b returned 0 after 632812 usecs
[   31.948003] calling  parkbd_init+0x0/0x184 @ 1
[   31.952002] parkbd: no such parport
[   31.956003] initcall parkbd_init+0x0/0x184 returned -19 after 3906 usecs
[   31.960003] calling  serport_init+0x0/0x2b @ 1
[   31.968003] initcall serport_init+0x0/0x2b returned 0 after 0 usecs
[   31.972003] calling  ct82c710_init+0x0/0x151 @ 1
[   31.976010] initcall ct82c710_init+0x0/0x151 returned -19 after 0 usecs
[   31.984002] calling  pcips2_init+0x0/0x16 @ 1
[   31.988016] bus: 'pci': add driver pcips2
[   31.992076] initcall pcips2_init+0x0/0x16 returned 0 after 3906 usecs
[   32.000003] calling  altera_ps2_init+0x0/0xf @ 1
[   32.004004] bus: 'platform': add driver altera_ps2
[   32.008057] initcall altera_ps2_init+0x0/0xf returned 0 after 3906 usecs
[   32.016003] calling  emu_init+0x0/0x16 @ 1
[   32.020013] bus: 'pci': add driver Emu10k1_gameport
[   32.024064] initcall emu_init+0x0/0x16 returned 0 after 3906 usecs
[   32.032003] calling  fm801_gp_init+0x0/0x16 @ 1
[   32.036012] bus: 'pci': add driver FM801_gameport
[   32.040063] initcall fm801_gp_init+0x0/0x16 returned 0 after 3906 usecs
[   32.044003] calling  l4_init+0x0/0x2c8 @ 1
[   32.052015] initcall l4_init+0x0/0x2c8 returned -19 after 0 usecs
[   32.056003] calling  mousedev_init+0x0/0x78 @ 1
[   32.060007] device: 'mice': device_add
[   32.064192] PM: Adding info for No Bus:mice
[   32.068063] device: 'psaux': device_add
[   32.072077] PM: Adding info for No Bus:psaux
[   32.076051] mice: PS/2 mouse device common for all mice
[   32.084004] initcall mousedev_init+0x0/0x78 returned 0 after 23437 usecs
[   32.088003] calling  joydev_init+0x0/0xf @ 1
[   32.092003] initcall joydev_init+0x0/0xf returned 0 after 0 usecs
[   32.100002] calling  evdev_init+0x0/0xf @ 1
[   32.104003] initcall evdev_init+0x0/0xf returned 0 after 0 usecs
[   32.108002] calling  atkbd_init+0x0/0x20 @ 1
[   32.112009] bus: 'serio': add driver atkbd
[   32.120001] initcall atkbd_init+0x0/0x20 returned 0 after 7812 usecs
[   32.120006] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
[   32.120009] bus: 'serio': really_probe: probing driver atkbd with device serio0
[   32.140006] calling  gpio_keys_init+0x0/0xf @ 1
[   32.144005] bus: 'platform': add driver gpio-keys
[   32.148062] initcall gpio_keys_init+0x0/0xf returned 0 after 3906 usecs
[   32.156003] calling  lm8323_init+0x0/0x11 @ 1
[   32.160004] bus: 'i2c': add driver lm8323
[   32.164056] i2c-core: driver [lm8323] registered
[   32.168004] initcall lm8323_init+0x0/0x11 returned 0 after 7812 usecs
[   32.176003] calling  matrix_keypad_init+0x0/0xf @ 1
[   32.180004] bus: 'platform': add driver matrix-keypad
[   32.184057] initcall matrix_keypad_init+0x0/0xf returned 0 after 3906 usecs
[   32.192003] calling  max7359_init+0x0/0x11 @ 1
[   32.196003] bus: 'i2c': add driver max7359
[   32.200062] i2c-core: driver [max7359] registered
[   32.204004] initcall max7359_init+0x0/0x11 returned 0 after 7812 usecs
[   32.212003] calling  nkbd_init+0x0/0x16 @ 1
[   32.216002] bus: 'serio': add driver newtonkbd
[   32.220059] initcall nkbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.228003] calling  opencores_kbd_init+0x0/0xf @ 1
[   32.232004] bus: 'platform': add driver opencores-kbd
[   32.236056] initcall opencores_kbd_init+0x0/0xf returned 0 after 3906 usecs
[   32.244003] calling  skbd_init+0x0/0x16 @ 1
[   32.248002] bus: 'serio': add driver stowaway
[   32.252058] initcall skbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.260003] calling  sunkbd_init+0x0/0x16 @ 1
[   32.264002] bus: 'serio': add driver sunkbd
[   32.268058] initcall sunkbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.276003] calling  xtkbd_init+0x0/0x16 @ 1
[   32.280002] bus: 'serio': add driver xtkbd
[   32.284067] initcall xtkbd_init+0x0/0x16 returned 0 after 3906 usecs
[   32.288003] calling  a3d_init+0x0/0x16 @ 1
[   32.292002] bus: 'gameport': add driver adc
[   32.296060] initcall a3d_init+0x0/0x16 returned 0 after 3906 usecs
[   32.304003] calling  adi_init+0x0/0x16 @ 1
[   32.308002] bus: 'gameport': add driver adi
[   32.312059] initcall adi_init+0x0/0x16 returned 0 after 3906 usecs
[   32.316003] calling  analog_init+0x0/0xcd @ 1
[   32.324002] bus: 'gameport': add driver analog
[   32.328059] initcall analog_init+0x0/0xcd returned 0 after 3906 usecs
[   32.332003] calling  db9_init+0x0/0x3ce @ 1
[   32.336003] initcall db9_init+0x0/0x3ce returned -19 after 0 usecs
[   32.344003] calling  gc_init+0x0/0x652 @ 1
[   32.348003] initcall gc_init+0x0/0x652 returned -19 after 0 usecs
[   32.352003] calling  gf2k_init+0x0/0x16 @ 1
[   32.356002] bus: 'gameport': add driver gf2k
[   32.364059] initcall gf2k_init+0x0/0x16 returned 0 after 7812 usecs
[   32.368003] calling  grip_init+0x0/0x16 @ 1
[   32.372002] bus: 'gameport': add driver grip_mp
[   32.376059] initcall grip_init+0x0/0x16 returned 0 after 3906 usecs
[   32.384003] calling  guillemot_init+0x0/0x16 @ 1
[   32.388002] bus: 'gameport': add driver guillemot
[   32.392059] initcall guillemot_init+0x0/0x16 returned 0 after 3906 usecs
[   32.400004] calling  iforce_init+0x0/0x41 @ 1
[   32.404007] bus: 'usb': add driver iforce
[   32.408063] usbcore: registered new interface driver iforce
[   32.412002] bus: 'serio': add driver iforce
[   32.416067] initcall iforce_init+0x0/0x41 returned 0 after 11718 usecs
[   32.424003] calling  interact_init+0x0/0x16 @ 1
[   32.428002] bus: 'gameport': add driver interact
[   32.432059] initcall interact_init+0x0/0x16 returned 0 after 3906 usecs
[   32.440003] calling  magellan_init+0x0/0x16 @ 1
[   32.444002] bus: 'serio': add driver magellan
[   32.448059] initcall magellan_init+0x0/0x16 returned 0 after 3906 usecs
[   32.456003] calling  sw_init+0x0/0x16 @ 1
[   32.460002] bus: 'gameport': add driver sidewinder
[   32.464058] initcall sw_init+0x0/0x16 returned 0 after 3906 usecs
[   32.472003] calling  spaceball_init+0x0/0x16 @ 1
[   32.476002] bus: 'serio': add driver spaceball
[   32.480058] initcall spaceball_init+0x0/0x16 returned 0 after 3906 usecs
[   32.488003] calling  spaceorb_init+0x0/0x16 @ 1
[   32.492002] bus: 'serio': add driver spaceorb
[   32.496059] initcall spaceorb_init+0x0/0x16 returned 0 after 3906 usecs
[   32.504003] calling  stinger_init+0x0/0x16 @ 1
[   32.508002] bus: 'serio': add driver stinger
[   32.512058] initcall stinger_init+0x0/0x16 returned 0 after 3906 usecs
[   32.516003] calling  tmdc_init+0x0/0x16 @ 1
[   32.520002] bus: 'gameport': add driver tmdc
[   32.524068] initcall tmdc_init+0x0/0x16 returned 0 after 3906 usecs
[   32.532003] calling  tgfx_init+0x0/0x3c7 @ 1
[   32.536003] initcall tgfx_init+0x0/0x3c7 returned -19 after 0 usecs
[   32.544003] calling  twidjoy_init+0x0/0x16 @ 1
[   32.548002] bus: 'serio': add driver twidjoy
[   32.552059] initcall twidjoy_init+0x0/0x16 returned 0 after 3906 usecs
[   32.556003] calling  warrior_init+0x0/0x16 @ 1
[   32.564002] bus: 'serio': add driver warrior
[   32.568058] initcall warrior_init+0x0/0x16 returned 0 after 3906 usecs
[   32.572003] calling  zhenhua_init+0x0/0x16 @ 1
[   32.576002] bus: 'serio': add driver zhenhua
[   32.580059] initcall zhenhua_init+0x0/0x16 returned 0 after 7812 usecs
[   32.588003] calling  usb_acecad_init+0x0/0x2d @ 1
[   32.592006] bus: 'usb': add driver usb_acecad
[   32.596057] usbcore: registered new interface driver usb_acecad
[   32.604002] acecad: v3.2:USB Acecad Flair tablet driver
[   32.608003] initcall usb_acecad_init+0x0/0x2d returned 0 after 15625 usecs
[   32.616003] calling  kbtab_init+0x0/0x2d @ 1
[   32.636008] bus: 'usb': add driver kbtab
[   32.652024] device: 'input0': device_add
[   32.652058] usbcore: registered new interface driver kbtab
[   32.652060] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[   32.652064] initcall kbtab_init+0x0/0x2d returned 0 after 19531 usecs
[   32.652067] calling  pm860x_touch_init+0x0/0xf @ 1
[   32.652072] bus: 'platform': add driver 88pm860x-touch
[   32.652129] initcall pm860x_touch_init+0x0/0xf returned 0 after 0 usecs
[   32.652132] calling  ad7879_init+0x0/0x11 @ 1
[   32.652135] bus: 'i2c': add driver ad7879
[   32.652187] i2c-core: driver [ad7879] registered
[   32.652191] initcall ad7879_init+0x0/0x11 returned 0 after 0 usecs
[   32.652194] calling  dynapro_init+0x0/0x16 @ 1
[   32.652196] bus: 'serio': add driver dynapro
[   32.652271] initcall dynapro_init+0x0/0x16 returned 0 after 0 usecs
[   32.652274] calling  gunze_init+0x0/0x16 @ 1
[   32.652277] bus: 'serio': add driver gunze
[   32.652334] initcall gunze_init+0x0/0x16 returned 0 after 0 usecs
[   32.652337] calling  eeti_ts_init+0x0/0x11 @ 1
[   32.652340] bus: 'i2c': add driver eeti_ts
[   32.652392] i2c-core: driver [eeti_ts] registered
[   32.652395] initcall eeti_ts_init+0x0/0x11 returned 0 after 0 usecs
[   32.652398] calling  inexio_init+0x0/0x16 @ 1
[   32.652401] bus: 'serio': add driver inexio
[   32.652457] initcall inexio_init+0x0/0x16 returned 0 after 0 usecs
[   32.652461] calling  mcs5000_ts_init+0x0/0x11 @ 1
[   32.652463] bus: 'i2c': add driver mcs5000_ts
[   32.652515] i2c-core: driver [mcs5000_ts] registered
[   32.652519] initcall mcs5000_ts_init+0x0/0x11 returned 0 after 0 usecs
[   32.652522] calling  mk712_init+0x0/0x1b4 @ 1
[   32.652528] mk712: device not present
[   32.652532] initcall mk712_init+0x0/0x1b4 returned -19 after 0 usecs
[   32.652535] calling  usbtouch_init+0x0/0x16 @ 1
[   32.652542] bus: 'usb': add driver usbtouchscreen
[   32.652599] usbcore: registered new interface driver usbtouchscreen
[   32.652602] initcall usbtouch_init+0x0/0x16 returned 0 after 0 usecs
[   32.652605] calling  pm_init+0x0/0x16 @ 1
[   32.652608] bus: 'serio': add driver penmountlpc
[   32.652665] initcall pm_init+0x0/0x16 returned 0 after 0 usecs
[   32.652668] calling  tr_init+0x0/0x16 @ 1
[   32.652670] bus: 'serio': add driver touchright
[   32.652738] initcall tr_init+0x0/0x16 returned 0 after 0 usecs
[   32.652741] calling  tw_init+0x0/0x16 @ 1
[   32.652743] bus: 'serio': add driver touchwin
[   32.652810] initcall tw_init+0x0/0x16 returned 0 after 0 usecs
[   32.652813] calling  tsc2007_init+0x0/0x11 @ 1
[   32.652816] bus: 'i2c': add driver tsc2007
[   32.652868] i2c-core: driver [tsc2007] registered
[   32.652872] initcall tsc2007_init+0x0/0x11 returned 0 after 0 usecs
[   32.652875] calling  ad714x_i2c_init+0x0/0x11 @ 1
[   32.652878] bus: 'i2c': add driver ad714x_captouch
[   32.652931] i2c-core: driver [ad714x_captouch] registered
[   32.652934] initcall ad714x_i2c_init+0x0/0x11 returned 0 after 0 usecs
[   32.652937] calling  apanel_init+0x0/0x179 @ 1
[   32.653094] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[   32.653094] initcall apanel_init+0x0/0x179 returned -19 after 0 usecs
[   32.653094] calling  ati_remote_init+0x0/0x3c @ 1
[   32.653094] bus: 'usb': add driver ati_remote
[   32.653094] usbcore: registered new interface driver ati_remote
[   32.653094] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
[   32.653094] initcall ati_remote_init+0x0/0x3c returned 0 after 0 usecs
[   32.653094] calling  ati_remote2_init+0x0/0x3c @ 1
[   32.653094] bus: 'usb': add driver ati_remote2
[   32.653094] usbcore: registered new interface driver ati_remote2
[   32.653094] ati_remote2: ATI/Philips USB RF remote driver 0.3
[   32.653094] initcall ati_remote2_init+0x0/0x3c returned 0 after 0 usecs
[   32.653094] calling  cm109_init+0x0/0xdc @ 1
[   32.653094] cm109: Keymap for Komunikate KIP1000 phone loaded
[   32.653094] bus: 'usb': add driver cm109
[   32.653094] usbcore: registered new interface driver cm109
[   32.653094] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[   32.653094] initcall cm109_init+0x0/0xdc returned 0 after 0 usecs
[   32.653094] calling  usb_keyspan_init+0x0/0x2f @ 1
[   32.653094] bus: 'usb': add driver keyspan_remote
[   32.653094] usbcore: registered new interface driver keyspan_remote
[   32.653094] initcall usb_keyspan_init+0x0/0x2f returned 0 after 0 usecs
[   32.653094] calling  max8925_onkey_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver max8925-onkey
[   32.653094] initcall max8925_onkey_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  wbcir_init+0x0/0x40 @ 1
[   32.653094] bus: 'pnp': add driver Winbond CIR
[   32.653094] initcall wbcir_init+0x0/0x40 returned 0 after 0 usecs
[   32.653094] calling  wm831x_on_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver wm831x-on
[   32.653094] initcall wm831x_on_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  yealink_dev_init+0x0/0x2d @ 1
[   32.653094] bus: 'usb': add driver yealink
[   32.653094] usbcore: registered new interface driver yealink
[   32.653094] yealink: yld-20051230:Yealink phone driver
[   32.653094] initcall yealink_dev_init+0x0/0x2d returned 0 after 0 usecs
[   32.653094] calling  bq4802_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver rtc-bq4802
[   32.653094] initcall bq4802_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1286_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver rtc-ds1286
[   32.653094] initcall ds1286_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1307_init+0x0/0x11 @ 1
[   32.653094] bus: 'i2c': add driver rtc-ds1307
[   32.653094] i2c-core: driver [rtc-ds1307] registered
[   32.653094] initcall ds1307_init+0x0/0x11 returned 0 after 0 usecs
[   32.653094] calling  ds1511_rtc_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver ds1511
[   32.653094] initcall ds1511_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1553_init+0x0/0xf @ 1
[   32.653094] bus: 'platform': add driver rtc-ds1553
[   32.653094] initcall ds1553_init+0x0/0xf returned 0 after 0 usecs
[   32.653094] calling  ds1672_init+0x0/0x11 @ 1
[   32.653094] bus: 'i2c': add driver rtc-ds1672
[   32.653094] i2c-core: driver [rtc-ds1672] registered
[   32.653097] initcall ds1672_init+0x0/0x11 returned 0 after 0 usecs
[   32.653100] calling  fm3130_init+0x0/0x11 @ 1
[   32.653102] bus: 'i2c': add driver rtc-fm3130
[   32.653154] i2c-core: driver [rtc-fm3130] registered
[   32.653158] initcall fm3130_init+0x0/0x11 returned 0 after 0 usecs
[   32.653161] calling  isl1208_init+0x0/0x11 @ 1
[   32.653164] bus: 'i2c': add driver rtc-isl1208
[   32.653225] i2c-core: driver [rtc-isl1208] registered
[   32.653229] initcall isl1208_init+0x0/0x11 returned 0 after 0 usecs
[   32.653232] calling  m48t35_init+0x0/0xf @ 1
[   32.653237] bus: 'platform': add driver rtc-m48t35
[   32.653293] initcall m48t35_init+0x0/0xf returned 0 after 0 usecs
[   32.653296] calling  m48t59_rtc_init+0x0/0xf @ 1
[   32.653300] bus: 'platform': add driver rtc-m48t59
[   32.653366] initcall m48t59_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.653369] calling  m48t86_rtc_init+0x0/0xf @ 1
[   32.653373] bus: 'platform': add driver rtc-m48t86
[   32.653429] initcall m48t86_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.653432] calling  max6900_init+0x0/0x11 @ 1
[   32.653435] bus: 'i2c': add driver rtc-max6900
[   32.653488] i2c-core: driver [rtc-max6900] registered
[   32.653491] initcall max6900_init+0x0/0x11 returned 0 after 0 usecs
[   32.653495] calling  msm6242_rtc_init+0x0/0x14 @ 1
[   32.653499] bus: 'platform': add driver rtc-msm6242
[   32.653555] bus: 'platform': remove driver rtc-msm6242
[   32.653605] driver: 'rtc-msm6242': driver_release
[   32.653612] initcall msm6242_rtc_init+0x0/0x14 returned -19 after 0 usecs
[   32.653615] calling  rp5c01_rtc_init+0x0/0x14 @ 1
[   32.653619] bus: 'platform': add driver rtc-rp5c01
[   32.653673] bus: 'platform': remove driver rtc-rp5c01
[   32.653722] driver: 'rtc-rp5c01': driver_release
[   32.653729] initcall rp5c01_rtc_init+0x0/0x14 returned -19 after 0 usecs
[   32.653732] calling  rs5c372_init+0x0/0x11 @ 1
[   32.653736] bus: 'i2c': add driver rtc-rs5c372
[   32.653788] i2c-core: driver [rtc-rs5c372] registered
[   32.653792] initcall rs5c372_init+0x0/0x11 returned 0 after 0 usecs
[   32.653795] calling  rx8581_init+0x0/0x11 @ 1
[   32.653798] bus: 'i2c': add driver rtc-rx8581
[   32.653850] i2c-core: driver [rtc-rx8581] registered
[   32.653853] initcall rx8581_init+0x0/0x11 returned 0 after 0 usecs
[   32.653856] calling  s35390a_rtc_init+0x0/0x11 @ 1
[   32.653859] bus: 'i2c': add driver rtc-s35390a
[   32.653911] i2c-core: driver [rtc-s35390a] registered
[   32.653915] initcall s35390a_rtc_init+0x0/0x11 returned 0 after 0 usecs
[   32.653918] calling  test_init+0x0/0x93 @ 1
[   32.653923] bus: 'platform': add driver rtc-test
[   32.653984] Registering platform device 'rtc-test.0'. Parent at platform
[   32.653987] device: 'rtc-test.0': device_add
[   32.653994] bus: 'platform': add device rtc-test.0
[   32.654016] PM: Adding info for platform:rtc-test.0
[   32.654077] bus: 'platform': driver_probe_device: matched device rtc-test.0 with driver rtc-test
[   32.654080] bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.0
[   32.654108] device: 'rtc0': device_add
[   32.654270] PM: Adding info for No Bus:rtc0
[   32.654325] rtc-test rtc-test.0: rtc core: registered test as rtc0
[   32.654329] driver: 'rtc-test.0': driver_bound: bound to device 'rtc-test'
[   32.654332] bus: 'platform': really_probe: bound device rtc-test.0 to driver rtc-test
[   32.654337] Registering platform device 'rtc-test.1'. Parent at platform
[   32.654340] device: 'rtc-test.1': device_add
[   32.654346] bus: 'platform': add device rtc-test.1
[   32.654359] PM: Adding info for platform:rtc-test.1
[   32.654416] bus: 'platform': driver_probe_device: matched device rtc-test.1 with driver rtc-test
[   32.654419] bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.1
[   32.654432] device: 'rtc1': device_add
[   32.654535] PM: Adding info for No Bus:rtc1
[   32.654588] rtc-test rtc-test.1: rtc core: registered test as rtc1
[   32.654592] driver: 'rtc-test.1': driver_bound: bound to device 'rtc-test'
[   32.654595] bus: 'platform': really_probe: bound device rtc-test.1 to driver rtc-test
[   32.654601] initcall test_init+0x0/0x93 returned 0 after 0 usecs
[   32.654604] calling  v3020_init+0x0/0xf @ 1
[   32.654610] bus: 'platform': add driver v3020
[   32.654669] initcall v3020_init+0x0/0xf returned 0 after 0 usecs
[   32.654672] calling  wm831x_rtc_init+0x0/0xf @ 1
[   32.654676] bus: 'platform': add driver wm831x-rtc
[   32.654734] initcall wm831x_rtc_init+0x0/0xf returned 0 after 0 usecs
[   32.654737] calling  x1205_init+0x0/0x11 @ 1
[   32.654741] bus: 'i2c': add driver rtc-x1205
[   32.654805] i2c-core: driver [rtc-x1205] registered
[   32.654809] initcall x1205_init+0x0/0x11 returned 0 after 0 usecs
[   32.654813] calling  i2c_smbus_init+0x0/0x11 @ 1
[   32.654816] bus: 'i2c': add driver smbus_alert
[   32.654868] i2c-core: driver [smbus_alert] registered
[   32.654872] initcall i2c_smbus_init+0x0/0x11 returned 0 after 0 usecs
[   32.654875] calling  ali1563_init+0x0/0x16 @ 1
[   32.654891] bus: 'pci': add driver ali1563_smbus
[   32.654967] initcall ali1563_init+0x0/0x16 returned 0 after 0 usecs
[   32.654971] calling  i2c_ali15x3_init+0x0/0x16 @ 1
[   32.654983] bus: 'pci': add driver ali15x3_smbus
[   32.655046] initcall i2c_ali15x3_init+0x0/0x16 returned 0 after 0 usecs
[   32.655049] calling  amd756_init+0x0/0x16 @ 1
[   32.655062] bus: 'pci': add driver amd756_smbus
[   32.655125] initcall amd756_init+0x0/0x16 returned 0 after 0 usecs
[   32.655128] calling  i2c_amd8111_init+0x0/0x16 @ 1
[   32.655141] bus: 'pci': add driver amd8111_smbus2
[   32.655213] initcall i2c_amd8111_init+0x0/0x16 returned 0 after 0 usecs
[   32.655216] calling  i2c_i801_init+0x0/0x9e @ 1
[   32.655549] bus: 'pci': add driver i801_smbus
[   32.655615] initcall i2c_i801_init+0x0/0x9e returned 0 after 0 usecs
[   32.655618] calling  i2c_sch_init+0x0/0xf @ 1
[   32.655623] bus: 'platform': add driver isch_smbus
[   32.655680] initcall i2c_sch_init+0x0/0xf returned 0 after 0 usecs
[   32.655684] calling  nforce2_init+0x0/0x16 @ 1
[   32.655697] bus: 'pci': add driver nForce2_smbus
[   32.655708] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver nForce2_smbus
[   32.655711] bus: 'pci': really_probe: probing driver nForce2_smbus with device 0000:00:01.1
[   32.655754] device: 'i2c-0': device_add
[   32.655764] bus: 'i2c': add device i2c-0
[   32.655775] PM: Adding info for i2c:i2c-0
[   32.655830] i2c i2c-0: adapter [SMBus nForce2 adapter at 4c00] registered
[   32.655838] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[   32.655845] device: 'i2c-1': device_add
[   32.655855] bus: 'i2c': add device i2c-1
[   32.655865] PM: Adding info for i2c:i2c-1
[   32.655915] i2c i2c-1: adapter [SMBus nForce2 adapter at 4c40] registered
[   32.655920] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[   32.655923] driver: '0000:00:01.1': driver_bound: bound to device 'nForce2_smbus'
[   32.655927] bus: 'pci': really_probe: bound device 0000:00:01.1 to driver nForce2_smbus
[   32.655985] initcall nforce2_init+0x0/0x16 returned 0 after 0 usecs
[   32.655988] calling  i2c_vt586b_init+0x0/0x16 @ 1
[   32.655998] bus: 'pci': add driver vt586b_smbus
[   32.655998] initcall i2c_vt586b_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  i2c_vt596_init+0x0/0x16 @ 1
[   32.655998] bus: 'pci': add driver vt596_smbus
[   32.655998] initcall i2c_vt596_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  ocores_i2c_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver ocores-i2c
[   32.655998] initcall ocores_i2c_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  i2c_pca_pf_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver i2c-pca-platform
[   32.655998] initcall i2c_pca_pf_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  i2c_adap_simtec_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver simtec-i2c
[   32.655998] initcall i2c_adap_simtec_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  xiic_i2c_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver xiic-i2c
[   32.655998] initcall xiic_i2c_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  i2c_parport_init+0x0/0x43 @ 1
[   32.655998] i2c-parport: adapter type unspecified
[   32.655998] initcall i2c_parport_init+0x0/0x43 returned -19 after 0 usecs
[   32.655998] calling  taos_init+0x0/0x16 @ 1
[   32.655998] bus: 'serio': add driver taos-evm
[   32.655998] initcall taos_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  usb_i2c_tiny_usb_init+0x0/0x16 @ 1
[   32.655998] bus: 'usb': add driver i2c-tiny-usb
[   32.655998] usbcore: registered new interface driver i2c-tiny-usb
[   32.655998] initcall usb_i2c_tiny_usb_init+0x0/0x16 returned 0 after 0 usecs
[   32.655998] calling  scx200_acb_init+0x0/0x1e3 @ 1
[   32.655998] scx200_acb: NatSemi SCx200 ACCESS.bus Driver
[   32.655998] initcall scx200_acb_init+0x0/0x1e3 returned -19 after 0 usecs
[   32.655998] calling  scx200_i2c_init+0x0/0xb9 @ 1
[   32.655998] scx200_i2c: NatSemi SCx200 I2C Driver
[   32.655998] scx200_i2c: no SCx200 gpio pins available
[   32.655998] initcall scx200_i2c_init+0x0/0xb9 returned -19 after 0 usecs
[   32.655998] calling  pps_ktimer_init+0x0/0x7e @ 1
[   32.655998] device: 'pps0': device_add
[   32.655998] PM: Adding info for No Bus:pps0
[   32.655998] new PPS source ktimer at ID 0
[   32.655998] ktimer PPS source registered at 0
[   32.655998] initcall pps_ktimer_init+0x0/0x7e returned 0 after 0 usecs
[   32.655998] calling  pda_power_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver pda-power
[   32.655998] initcall pda_power_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  max8925_power_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver max8925-power
[   32.655998] initcall max8925_power_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  wm831x_backup_init+0x0/0xf @ 1
[   32.655998] bus: 'platform': add driver wm831x-backup
[   32.655998] initcall wm831x_backup_init+0x0/0xf returned 0 after 0 usecs
[   32.655998] calling  test_power_init+0x0/0x5b @ 1
[   32.655998] device: 'test_ac': device_add
[   32.655998] PM: Adding info for No Bus:test_ac
[   32.655998] device: 'test_battery': device_add
[   32.655998] PM: Adding info for No Bus:test_battery
[   32.655998] test_power_get_battery_property: some properties deliberately report errors.
[   32.655998] power_supply test_battery: driver failed to report `charge_full' property
[   32.655998] device: 'test_battery': dev_uevent: class uevent() returned -22
[   32.655998] initcall test_power_init+0x0/0x5b returned 0 after 0 usecs
[   32.655998] calling  ds278x_init+0x0/0x11 @ 1
[   32.655998] bus: 'i2c': add driver ds2782-battery
[   32.655998] test_power_get_battery_property: some properties deliberately report errors.
[   32.655998] power_supply test_battery: driver failed to report `charge_full' property
[   32.655998] device: 'test_battery': dev_uevent: class uevent() returned -22
[   32.655998] i2c-core: driver [ds2782-battery] registered
[   32.655998] initcall ds278x_init+0x0/0x11 returned 0 after 0 usecs
[   32.655998] calling  max17040_init+0x0/0x11 @ 1
[   32.655998] bus: 'i2c': add driver max17040
[   32.655998] i2c-core: driver [max17040] registered
[   32.655998] initcall max17040_init+0x0/0x11 returned 0 after 0 usecs
[   32.655998] calling  sensors_w83792d_init+0x0/0x11 @ 1
[   32.655998] bus: 'i2c': add driver w83792d
[   32.655998] i2c-core: driver [w83792d] registered
[   32.655998] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   32.656047] PM: Adding info for No Bus:input0
[   32.660097] input: AT Translated Set 2 keyboard as /class/input/input0
[   32.660007] i2c i2c-0: Transaction failed (0x10)!
[   32.660011] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   32.664020] device: 'event0': device_add
[   32.668191] PM: Adding info for No Bus:event0
[   32.668005] i2c i2c-0: Transaction failed (0x10)!
[   32.668007] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   32.672062] driver: 'serio0': driver_bound: bound to device 'atkbd'
[   32.676004] bus: 'serio': really_probe: bound device serio0 to driver atkbd
[   32.676005] i2c i2c-0: Transaction failed (0x10)!
[   32.676007] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   32.680004] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd
[   32.684002] bus: 'serio': really_probe: probing driver atkbd with device serio1
[   32.684005] i2c i2c-0: Transaction failed (0x10)!
[   32.684013] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   32.692019] i2c i2c-1: Transaction failed (0x10)!
[   32.696003] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   32.708004] i2c i2c-1: Transaction failed (0x10)!
[   32.712002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   32.724003] i2c i2c-1: Transaction failed (0x10)!
[   32.728002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   32.740003] i2c i2c-1: Transaction failed (0x10)!
[   32.744007] initcall sensors_w83792d_init+0x0/0x11 returned 0 after 89843 usecs
[   32.752003] calling  sensors_w83781d_init+0x0/0x367 @ 1
[   32.756026] w83781d: Detection failed at step 3
[   32.760015] bus: 'i2c': add driver w83781d
[   32.764058] i2c-core: driver [w83781d] registered
[   32.768006] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[   32.784004] i2c i2c-0: Transaction failed (0x10)!
[   32.788002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   32.800003] i2c i2c-0: Transaction failed (0x10)!
[   32.804005] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   32.816004] i2c i2c-0: Transaction failed (0x10)!
[   32.820002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   32.832004] i2c i2c-0: Transaction failed (0x10)!
[   32.836002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   32.848003] i2c i2c-0: Transaction failed (0x10)!
[   32.852002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   32.864003] i2c i2c-0: Transaction failed (0x10)!
[   32.868002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   32.880004] i2c i2c-0: Transaction failed (0x10)!
[   32.884002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   32.896004] i2c i2c-0: Transaction failed (0x10)!
[   32.900007] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[   32.912004] i2c i2c-1: Transaction failed (0x10)!
[   32.916002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   32.928004] i2c i2c-1: Transaction failed (0x10)!
[   32.932002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   32.944004] i2c i2c-1: Transaction failed (0x10)!
[   32.948003] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   32.960004] i2c i2c-1: Transaction failed (0x10)!
[   32.964002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   32.976004] i2c i2c-1: Transaction failed (0x10)!
[   32.980002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   32.992004] i2c i2c-1: Transaction failed (0x10)!
[   32.996002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.008004] i2c i2c-1: Transaction failed (0x10)!
[   33.012002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   33.024004] i2c i2c-1: Transaction failed (0x10)!
[   33.028007] initcall sensors_w83781d_init+0x0/0x367 returned 0 after 265625 usecs
[   33.036003] calling  sensors_w83791d_init+0x0/0x11 @ 1
[   33.040003] bus: 'i2c': add driver w83791d
[   33.044055] i2c-core: driver [w83791d] registered
[   33.048005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.064004] i2c i2c-0: Transaction failed (0x10)!
[   33.068002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.080004] i2c i2c-0: Transaction failed (0x10)!
[   33.084002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.096004] i2c i2c-0: Transaction failed (0x10)!
[   33.100002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   33.112004] i2c i2c-0: Transaction failed (0x10)!
[   33.116007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   33.128004] i2c i2c-1: Transaction failed (0x10)!
[   33.132002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   33.144004] i2c i2c-1: Transaction failed (0x10)!
[   33.148002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.160004] i2c i2c-1: Transaction failed (0x10)!
[   33.164002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   33.176004] i2c i2c-1: Transaction failed (0x10)!
[   33.180006] initcall sensors_w83791d_init+0x0/0x11 returned 0 after 136718 usecs
[   33.188003] calling  abituguru3_init+0x0/0x1f3 @ 1
[   33.192007] initcall abituguru3_init+0x0/0x1f3 returned -19 after 0 usecs
[   33.200004] calling  ad7414_init+0x0/0x11 @ 1
[   33.204005] bus: 'i2c': add driver ad7414
[   33.208056] i2c-core: driver [ad7414] registered
[   33.212004] initcall ad7414_init+0x0/0x11 returned 0 after 7812 usecs
[   33.220003] calling  sensors_adm1021_init+0x0/0x11 @ 1
[   33.224003] bus: 'i2c': add driver adm1021
[   33.228054] i2c-core: driver [adm1021] registered
[   33.232005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   33.248004] i2c i2c-0: Transaction failed (0x10)!
[   33.252002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   33.264004] i2c i2c-0: Transaction failed (0x10)!
[   33.268002] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   33.280004] i2c i2c-0: Transaction failed (0x10)!
[   33.284002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   33.296004] i2c i2c-0: Transaction failed (0x10)!
[   33.300002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   33.312004] i2c i2c-0: Transaction failed (0x10)!
[   33.316002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   33.328004] i2c i2c-0: Transaction failed (0x10)!
[   33.332002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   33.344004] i2c i2c-0: Transaction failed (0x10)!
[   33.348002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   33.360004] i2c i2c-0: Transaction failed (0x10)!
[   33.364002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   33.376004] i2c i2c-0: Transaction failed (0x10)!
[   33.380007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   33.392005] i2c i2c-1: Transaction failed (0x10)!
[   33.396003] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   33.412004] i2c i2c-1: Transaction failed (0x10)!
[   33.416002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   33.428004] i2c i2c-1: Transaction failed (0x10)!
[   33.432002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   33.444004] i2c i2c-1: Transaction failed (0x10)!
[   33.448002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   33.460004] i2c i2c-1: Transaction failed (0x10)!
[   33.464002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   33.476004] i2c i2c-1: Transaction failed (0x10)!
[   33.480002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   33.492004] i2c i2c-1: Transaction failed (0x10)!
[   33.496002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   33.508004] i2c i2c-1: Transaction failed (0x10)!
[   33.512002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   33.524004] i2c i2c-1: Transaction failed (0x10)!
[   33.528007] initcall sensors_adm1021_init+0x0/0x11 returned 0 after 296875 usecs
[   33.536003] calling  sensors_adm1025_init+0x0/0x11 @ 1
[   33.540004] bus: 'i2c': add driver adm1025
[   33.544057] i2c-core: driver [adm1025] registered
[   33.548005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.564004] i2c i2c-0: Transaction failed (0x10)!
[   33.568002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.580004] i2c i2c-0: Transaction failed (0x10)!
[   33.584002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.596004] i2c i2c-0: Transaction failed (0x10)!
[   33.600007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   33.612004] i2c i2c-1: Transaction failed (0x10)!
[   33.616002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   33.628004] i2c i2c-1: Transaction failed (0x10)!
[   33.632002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.644004] i2c i2c-1: Transaction failed (0x10)!
[   33.648006] initcall sensors_adm1025_init+0x0/0x11 returned 0 after 105468 usecs
[   33.656002] PPS event at 4294900710
[   33.659494] calling  sensors_adm1029_init+0x0/0x11 @ 1
[   33.664004] bus: 'i2c': add driver adm1029
[   33.668055] i2c-core: driver [adm1029] registered
[   33.672005] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[   33.684004] i2c i2c-0: Transaction failed (0x10)!
[   33.688002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   33.700004] i2c i2c-0: Transaction failed (0x10)!
[   33.704002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   33.716004] i2c i2c-0: Transaction failed (0x10)!
[   33.720002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   33.732004] i2c i2c-0: Transaction failed (0x10)!
[   33.736002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.748004] i2c i2c-0: Transaction failed (0x10)!
[   33.752002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.764004] i2c i2c-0: Transaction failed (0x10)!
[   33.768002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.780004] i2c i2c-0: Transaction failed (0x10)!
[   33.784002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   33.796004] i2c i2c-0: Transaction failed (0x10)!
[   33.800007] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[   33.812004] i2c i2c-1: Transaction failed (0x10)!
[   33.816002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   33.828004] i2c i2c-1: Transaction failed (0x10)!
[   33.832002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   33.844004] i2c i2c-1: Transaction failed (0x10)!
[   33.848002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   33.860004] i2c i2c-1: Transaction failed (0x10)!
[   33.864002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   33.876004] i2c i2c-1: Transaction failed (0x10)!
[   33.880002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   33.892004] i2c i2c-1: Transaction failed (0x10)!
[   33.896002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   33.908004] i2c i2c-1: Transaction failed (0x10)!
[   33.912002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   33.924004] i2c i2c-1: Transaction failed (0x10)!
[   33.928006] initcall sensors_adm1029_init+0x0/0x11 returned 0 after 257812 usecs
[   33.936003] calling  sensors_adm9240_init+0x0/0x11 @ 1
[   33.940004] bus: 'i2c': add driver adm9240
[   33.944065] i2c-core: driver [adm9240] registered
[   33.948006] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   33.964004] i2c i2c-0: Transaction failed (0x10)!
[   33.968002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   33.980004] i2c i2c-0: Transaction failed (0x10)!
[   33.984002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   33.996004] i2c i2c-0: Transaction failed (0x10)!
[   34.000002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   34.012004] i2c i2c-0: Transaction failed (0x10)!
[   34.016007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.028004] i2c i2c-1: Transaction failed (0x10)!
[   34.032002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   34.044004] i2c i2c-1: Transaction failed (0x10)!
[   34.048002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.060004] i2c i2c-1: Transaction failed (0x10)!
[   34.064002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   34.076004] i2c i2c-1: Transaction failed (0x10)!
[   34.080006] initcall sensors_adm9240_init+0x0/0x11 returned 0 after 136718 usecs
[   34.088003] calling  sensors_ads7828_init+0x0/0x4a @ 1
[   34.092004] bus: 'i2c': add driver ads7828
[   34.096055] i2c-core: driver [ads7828] registered
[   34.100005] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   34.116004] i2c i2c-0: Transaction failed (0x10)!
[   34.120002] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   34.132004] i2c i2c-0: Transaction failed (0x10)!
[   34.136002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   34.148004] i2c i2c-0: Transaction failed (0x10)!
[   34.152002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   34.164004] i2c i2c-0: Transaction failed (0x10)!
[   34.168007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   34.180004] i2c i2c-1: Transaction failed (0x10)!
[   34.184002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   34.196004] i2c i2c-1: Transaction failed (0x10)!
[   34.200002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   34.212004] i2c i2c-1: Transaction failed (0x10)!
[   34.216002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   34.228004] i2c i2c-1: Transaction failed (0x10)!
[   34.232006] initcall sensors_ads7828_init+0x0/0x4a returned 0 after 136718 usecs
[   34.240003] calling  adt7462_init+0x0/0x11 @ 1
[   34.244003] bus: 'i2c': add driver adt7462
[   34.248055] i2c-core: driver [adt7462] registered
[   34.252005] i2c i2c-0: found normal entry for adapter 0, addr 0x58
[   34.264004] i2c i2c-0: Transaction failed (0x10)!
[   34.268002] i2c i2c-0: found normal entry for adapter 0, addr 0x5c
[   34.280004] i2c i2c-0: Transaction failed (0x10)!
[   34.284007] i2c i2c-1: found normal entry for adapter 1, addr 0x58
[   34.296004] i2c i2c-1: Transaction failed (0x10)!
[   34.300002] i2c i2c-1: found normal entry for adapter 1, addr 0x5c
[   34.312004] i2c i2c-1: Transaction failed (0x10)!
[   34.316006] initcall adt7462_init+0x0/0x11 returned 0 after 70312 usecs
[   34.320003] calling  adt7470_init+0x0/0x11 @ 1
[   34.324004] bus: 'i2c': add driver adt7470
[   34.328055] i2c-core: driver [adt7470] registered
[   34.336005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   34.348004] i2c i2c-0: Transaction failed (0x10)!
[   34.352002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   34.364004] i2c i2c-0: Transaction failed (0x10)!
[   34.368002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   34.380004] i2c i2c-0: Transaction failed (0x10)!
[   34.384007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.396004] i2c i2c-1: Transaction failed (0x10)!
[   34.400002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.412004] i2c i2c-1: Transaction failed (0x10)!
[   34.416002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   34.428004] i2c i2c-1: Transaction failed (0x10)!
[   34.432006] initcall adt7470_init+0x0/0x11 returned 0 after 105468 usecs
[   34.436003] calling  sensors_adt7475_init+0x0/0x11 @ 1
[   34.444004] bus: 'i2c': add driver adt7475
[   34.448055] i2c-core: driver [adt7475] registered
[   34.452005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   34.464004] i2c i2c-0: Transaction failed (0x10)!
[   34.468002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   34.480004] i2c i2c-0: Transaction failed (0x10)!
[   34.484003] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   34.496004] i2c i2c-0: Transaction failed (0x10)!
[   34.500007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.512004] i2c i2c-1: Transaction failed (0x10)!
[   34.516002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   34.528004] i2c i2c-1: Transaction failed (0x10)!
[   34.532002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.544004] i2c i2c-1: Transaction failed (0x10)!
[   34.548006] initcall sensors_adt7475_init+0x0/0x11 returned 0 after 101562 usecs
[   34.556003] calling  applesmc_init+0x0/0x47a @ 1
[   34.560011] applesmc: supported laptop not found!
[   34.564002] applesmc: driver init failed (ret=-19)!
[   34.568003] initcall applesmc_init+0x0/0x47a returned -19 after 7812 usecs
[   34.576003] calling  atxp1_init+0x0/0x11 @ 1
[   34.580004] bus: 'i2c': add driver atxp1
[   34.584055] i2c-core: driver [atxp1] registered
[   34.588005] i2c i2c-0: found normal entry for adapter 0, addr 0x37
[   34.604004] i2c i2c-0: Transaction failed (0x10)!
[   34.608002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   34.620004] i2c i2c-0: Transaction failed (0x10)!
[   34.624007] i2c i2c-1: found normal entry for adapter 1, addr 0x37
[   34.636004] i2c i2c-1: Transaction failed (0x10)!
[   34.640002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   34.652004] i2c i2c-1: Transaction failed (0x10)!
[   34.656001] PPS event at 4294900960
[   34.660007] initcall atxp1_init+0x0/0x11 returned 0 after 78125 usecs
[   34.664004] calling  dme1737_init+0x0/0x139 @ 1
[   34.668003] bus: 'i2c': add driver dme1737
[   34.672056] i2c-core: driver [dme1737] registered
[   34.680005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   34.692004] i2c i2c-0: Transaction failed (0x10)!
[   34.696002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   34.708004] i2c i2c-0: Transaction failed (0x10)!
[   34.712002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   34.724004] i2c i2c-0: Transaction failed (0x10)!
[   34.728007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   34.740004] i2c i2c-1: Transaction failed (0x10)!
[   34.744002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   34.756004] i2c i2c-1: Transaction failed (0x10)!
[   34.760002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   34.772004] i2c i2c-1: Transaction failed (0x10)!
[   34.776020] initcall dme1737_init+0x0/0x139 returned 0 after 105468 usecs
[   34.780003] calling  sensor_emc1403_init+0x0/0x11 @ 1
[   34.788004] bus: 'i2c': add driver emc1403
[   34.792055] i2c-core: driver [emc1403] registered
[   34.796005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   34.808004] i2c i2c-0: Transaction failed (0x10)!
[   34.812002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   34.824004] i2c i2c-0: Transaction failed (0x10)!
[   34.828002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   34.840004] i2c i2c-0: Transaction failed (0x10)!
[   34.844002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   34.856004] i2c i2c-0: Transaction failed (0x10)!
[   34.860007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   34.872004] i2c i2c-1: Transaction failed (0x10)!
[   34.876002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   34.888004] i2c i2c-1: Transaction failed (0x10)!
[   34.892002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   34.904004] i2c i2c-1: Transaction failed (0x10)!
[   34.908002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   34.920004] i2c i2c-1: Transaction failed (0x10)!
[   34.924006] initcall sensor_emc1403_init+0x0/0x11 returned 0 after 132812 usecs
[   34.932003] calling  f71805f_init+0x0/0x111 @ 1
[   34.936027] initcall f71805f_init+0x0/0x111 returned -19 after 0 usecs
[   34.940003] calling  f71882fg_init+0x0/0x102 @ 1
[   34.944012] f71882fg: Not a Fintek device
[   34.948016] f71882fg: Not a Fintek device
[   34.952008] initcall f71882fg_init+0x0/0x102 returned -19 after 7812 usecs
[   34.960003] calling  sensors_f75375_init+0x0/0x11 @ 1
[   34.964004] bus: 'i2c': add driver f75375
[   34.968055] i2c-core: driver [f75375] registered
[   34.976005] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   34.988004] i2c i2c-0: Transaction failed (0x10)!
[   34.992002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   35.004004] i2c i2c-0: Transaction failed (0x10)!
[   35.008007] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   35.020004] i2c i2c-1: Transaction failed (0x10)!
[   35.024002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   35.036004] i2c i2c-1: Transaction failed (0x10)!
[   35.040006] initcall sensors_f75375_init+0x0/0x11 returned 0 after 74218 usecs
[   35.048003] calling  fschmd_init+0x0/0x11 @ 1
[   35.052004] bus: 'i2c': add driver fschmd
[   35.056065] i2c-core: driver [fschmd] registered
[   35.060006] i2c i2c-0: found normal entry for adapter 0, addr 0x73
[   35.072004] i2c i2c-0: Transaction failed (0x10)!
[   35.076007] i2c i2c-1: found normal entry for adapter 1, addr 0x73
[   35.088004] i2c i2c-1: Transaction failed (0x10)!
[   35.092006] initcall fschmd_init+0x0/0x11 returned 0 after 39062 usecs
[   35.096003] calling  g760a_init+0x0/0x11 @ 1
[   35.100004] bus: 'i2c': add driver g760a
[   35.104065] i2c-core: driver [g760a] registered
[   35.112005] initcall g760a_init+0x0/0x11 returned 0 after 11718 usecs
[   35.116003] calling  sensors_gl518sm_init+0x0/0x11 @ 1
[   35.120004] bus: 'i2c': add driver gl518sm
[   35.124055] i2c-core: driver [gl518sm] registered
[   35.132006] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   35.144004] i2c i2c-0: Transaction failed (0x10)!
[   35.148002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   35.160004] i2c i2c-0: Transaction failed (0x10)!
[   35.164007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   35.176004] i2c i2c-1: Transaction failed (0x10)!
[   35.180002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   35.192004] i2c i2c-1: Transaction failed (0x10)!
[   35.196006] initcall sensors_gl518sm_init+0x0/0x11 returned 0 after 74218 usecs
[   35.204003] calling  i5k_amb_init+0x0/0x52 @ 1
[   35.208006] bus: 'platform': add driver i5k_amb
[   35.212063] Registering platform device 'i5k_amb.0'. Parent at platform
[   35.216003] device: 'i5k_amb.0': device_add
[   35.220007] bus: 'platform': add device i5k_amb.0
[   35.228014] PM: Adding info for platform:i5k_amb.0
[   35.232066] bus: 'platform': driver_probe_device: matched device i5k_amb.0 with driver i5k_amb
[   35.240002] bus: 'platform': really_probe: probing driver i5k_amb with device i5k_amb.0
[   35.248032] initcall i5k_amb_init+0x0/0x52 returned 0 after 39062 usecs
[   35.256004] calling  sm_it87_init+0x0/0x34a @ 1
[   35.260031] it87: Found IT8712F chip at 0x290, revision 7
[   35.264008] it87: VID is disabled (pins used for GPIO)
[   35.268007] it87: in3 is VCC (+5V)
[   35.272001] it87: in7 is VCCH (+5V Stand-By)
[   35.276011] bus: 'platform': add driver it87
[   35.280079] Registering platform device 'it87.656'. Parent at platform
[   35.288003] device: 'it87.656': device_add
[   35.292006] bus: 'platform': add device it87.656
[   35.296012] PM: Adding info for platform:it87.656
[   35.300056] bus: 'platform': driver_probe_device: matched device it87.656 with driver it87
[   35.312002] bus: 'platform': really_probe: probing driver it87 with device it87.656
[   35.316017] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
[   35.324222] device: 'hwmon0': device_add
[   35.328017] PM: Adding info for No Bus:hwmon0
[   35.332053] driver: 'it87.656': driver_bound: bound to device 'it87'
[   35.340002] bus: 'platform': really_probe: bound device it87.656 to driver it87
[   35.348005] initcall sm_it87_init+0x0/0x34a returned 0 after 85937 usecs
[   35.356004] calling  k8temp_init+0x0/0x16 @ 1
[   35.360016] bus: 'pci': add driver k8temp
[   35.364024] bus: 'pci': driver_probe_device: matched device 0000:00:18.3 with driver k8temp
[   35.372002] bus: 'pci': really_probe: probing driver k8temp with device 0000:00:18.3
[   35.380058] device: 'hwmon1': device_add
[   35.384029] PM: Adding info for No Bus:hwmon1
[   35.388053] driver: '0000:00:18.3': driver_bound: bound to device 'k8temp'
[   35.396003] bus: 'pci': really_probe: bound device 0000:00:18.3 to driver k8temp
[   35.400056] initcall k8temp_init+0x0/0x16 returned 0 after 39062 usecs
[   35.408003] calling  k10temp_init+0x0/0x16 @ 1
[   35.412014] bus: 'pci': add driver k10temp
[   35.416066] initcall k10temp_init+0x0/0x16 returned 0 after 3906 usecs
[   35.424003] calling  lis3lv02d_init+0x0/0x11 @ 1
[   35.428004] bus: 'i2c': add driver lis3lv02d_i2c
[   35.432065] i2c-core: driver [lis3lv02d_i2c] registered
[   35.436005] initcall lis3lv02d_init+0x0/0x11 returned 0 after 7812 usecs
[   35.444003] calling  sensors_lm73_init+0x0/0x11 @ 1
[   35.448004] bus: 'i2c': add driver lm73
[   35.452055] i2c-core: driver [lm73] registered
[   35.456005] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   35.472004] i2c i2c-0: Transaction failed (0x10)!
[   35.476002] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   35.488004] i2c i2c-0: Transaction failed (0x10)!
[   35.492002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   35.504003] i2c i2c-0: Transaction failed (0x10)!
[   35.508002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   35.520004] i2c i2c-0: Transaction failed (0x10)!
[   35.524002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   35.536003] i2c i2c-0: Transaction failed (0x10)!
[   35.540002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   35.552003] i2c i2c-0: Transaction failed (0x10)!
[   35.556007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   35.568004] i2c i2c-1: Transaction failed (0x10)!
[   35.572002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   35.584003] i2c i2c-1: Transaction failed (0x10)!
[   35.588002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   35.600003] i2c i2c-1: Transaction failed (0x10)!
[   35.604002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   35.608004] CPA self-test:
[   35.616004] i2c i2c-1: Transaction failed (0x10)!
[   35.616996]  4k 262128 large 0 gb 0 x 262128[40000000-7ffef000] miss 0
[   35.624004] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   35.640005] i2c i2c-1: Transaction failed (0x10)!
[   35.640571]  4k 262128 large 0 gb 0 x 262128[40000000-7ffef000] miss 0
[   35.648003] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   35.660002] PPS event at 4294901211
[   35.664006] i2c i2c-1: Transaction failed (0x10)!
[   35.668009] initcall sensors_lm73_init+0x0/0x11 returned 0 after 214843 usecs
[   35.672004] calling  sensors_lm75_init+0x0/0x11 @ 1
[   35.680005] bus: 'i2c': add driver lm75
[   35.684067] i2c-core: driver [lm75] registered
[   35.688006] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   35.698803]  4k 262128 large 0 gb 0 x 262128[40000000-7ffef000] miss 0
[   35.700002] ok.
[   35.704006] i2c i2c-0: Transaction failed (0x10)!
[   35.708003] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   35.720003] i2c i2c-0: Transaction failed (0x10)!
[   35.724002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   35.736003] i2c i2c-0: Transaction failed (0x10)!
[   35.740002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   35.752003] i2c i2c-0: Transaction failed (0x10)!
[   35.756002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   35.768004] i2c i2c-0: Transaction failed (0x10)!
[   35.772002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   35.784003] i2c i2c-0: Transaction failed (0x10)!
[   35.788002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   35.800003] i2c i2c-0: Transaction failed (0x10)!
[   35.804004] i2c i2c-0: found normal entry for adapter 0, addr 0x4f
[   35.816004] i2c i2c-0: Transaction failed (0x10)!
[   35.820007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   35.832004] i2c i2c-1: Transaction failed (0x10)!
[   35.836002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   35.848003] i2c i2c-1: Transaction failed (0x10)!
[   35.852002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   35.864003] i2c i2c-1: Transaction failed (0x10)!
[   35.868002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   35.880003] i2c i2c-1: Transaction failed (0x10)!
[   35.884002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   35.896003] i2c i2c-1: Transaction failed (0x10)!
[   35.900002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   35.912003] i2c i2c-1: Transaction failed (0x10)!
[   35.916002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   35.928003] i2c i2c-1: Transaction failed (0x10)!
[   35.932002] i2c i2c-1: found normal entry for adapter 1, addr 0x4f
[   35.944003] i2c i2c-1: Transaction failed (0x10)!
[   35.948006] initcall sensors_lm75_init+0x0/0x11 returned 0 after 261718 usecs
[   35.952003] calling  sm_lm78_init+0x0/0x320 @ 1
[   35.960009] lm78: Failed to request port 0x295
[   35.964017] bus: 'i2c': add driver lm78
[   35.968056] i2c-core: driver [lm78] registered
[   35.972005] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[   35.984004] i2c i2c-0: Transaction failed (0x10)!
[   35.988002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   36.000003] i2c i2c-0: Transaction failed (0x10)!
[   36.004002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.016003] i2c i2c-0: Transaction failed (0x10)!
[   36.020002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.032004] i2c i2c-0: Transaction failed (0x10)!
[   36.036002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   36.048003] i2c i2c-0: Transaction failed (0x10)!
[   36.052002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   36.064003] i2c i2c-0: Transaction failed (0x10)!
[   36.068002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   36.080003] i2c i2c-0: Transaction failed (0x10)!
[   36.084002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   36.096003] i2c i2c-0: Transaction failed (0x10)!
[   36.100007] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[   36.112004] i2c i2c-1: Transaction failed (0x10)!
[   36.116002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   36.128003] i2c i2c-1: Transaction failed (0x10)!
[   36.132002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   36.144003] i2c i2c-1: Transaction failed (0x10)!
[   36.148002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   36.160003] i2c i2c-1: Transaction failed (0x10)!
[   36.164002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   36.176003] i2c i2c-1: Transaction failed (0x10)!
[   36.180002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   36.192003] i2c i2c-1: Transaction failed (0x10)!
[   36.196002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   36.208003] i2c i2c-1: Transaction failed (0x10)!
[   36.212002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   36.224003] i2c i2c-1: Transaction failed (0x10)!
[   36.228006] initcall sm_lm78_init+0x0/0x320 returned 0 after 261718 usecs
[   36.232003] calling  sensors_lm83_init+0x0/0x11 @ 1
[   36.240004] bus: 'i2c': add driver lm83
[   36.244055] i2c-core: driver [lm83] registered
[   36.248005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   36.260004] i2c i2c-0: Transaction failed (0x10)!
[   36.264002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   36.276003] i2c i2c-0: Transaction failed (0x10)!
[   36.280003] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   36.292004] i2c i2c-0: Transaction failed (0x10)!
[   36.296002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   36.308004] i2c i2c-0: Transaction failed (0x10)!
[   36.312002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.324004] i2c i2c-0: Transaction failed (0x10)!
[   36.328002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.340004] i2c i2c-0: Transaction failed (0x10)!
[   36.344002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   36.356004] i2c i2c-0: Transaction failed (0x10)!
[   36.360002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   36.372004] i2c i2c-0: Transaction failed (0x10)!
[   36.376002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   36.388004] i2c i2c-0: Transaction failed (0x10)!
[   36.392007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   36.404004] i2c i2c-1: Transaction failed (0x10)!
[   36.408002] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   36.420004] i2c i2c-1: Transaction failed (0x10)!
[   36.424002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   36.436004] i2c i2c-1: Transaction failed (0x10)!
[   36.440002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   36.452004] i2c i2c-1: Transaction failed (0x10)!
[   36.456002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   36.468004] i2c i2c-1: Transaction failed (0x10)!
[   36.472002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   36.484004] i2c i2c-1: Transaction failed (0x10)!
[   36.488002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   36.500004] i2c i2c-1: Transaction failed (0x10)!
[   36.504002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   36.516004] i2c i2c-1: Transaction failed (0x10)!
[   36.520002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   36.532004] i2c i2c-1: Transaction failed (0x10)!
[   36.536007] initcall sensors_lm83_init+0x0/0x11 returned 0 after 289062 usecs
[   36.540003] calling  sensors_lm87_init+0x0/0x11 @ 1
[   36.548004] bus: 'i2c': add driver lm87
[   36.552054] i2c-core: driver [lm87] registered
[   36.556005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   36.568004] i2c i2c-0: Transaction failed (0x10)!
[   36.572002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   36.584004] i2c i2c-0: Transaction failed (0x10)!
[   36.588002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   36.600004] i2c i2c-0: Transaction failed (0x10)!
[   36.604007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   36.616004] i2c i2c-1: Transaction failed (0x10)!
[   36.620002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   36.632004] i2c i2c-1: Transaction failed (0x10)!
[   36.636002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   36.648004] i2c i2c-1: Transaction failed (0x10)!
[   36.652006] initcall sensors_lm87_init+0x0/0x11 returned 0 after 101562 usecs
[   36.656003] calling  sensors_lm95241_init+0x0/0x11 @ 1
[   36.664001] PPS event at 4294901462
[   36.668006] bus: 'i2c': add driver lm95241
[   36.672055] i2c-core: driver [lm95241] registered
[   36.676005] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   36.688004] i2c i2c-0: Transaction failed (0x10)!
[   36.692002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.704004] i2c i2c-0: Transaction failed (0x10)!
[   36.708002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.720004] i2c i2c-0: Transaction failed (0x10)!
[   36.724007] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   36.736004] i2c i2c-1: Transaction failed (0x10)!
[   36.740002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   36.752004] i2c i2c-1: Transaction failed (0x10)!
[   36.756002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   36.768004] i2c i2c-1: Transaction failed (0x10)!
[   36.772006] initcall sensors_lm95241_init+0x0/0x11 returned 0 after 101562 usecs
[   36.780003] calling  ltc4215_init+0x0/0x11 @ 1
[   36.784004] bus: 'i2c': add driver ltc4215
[   36.788055] i2c-core: driver [ltc4215] registered
[   36.792005] initcall ltc4215_init+0x0/0x11 returned 0 after 7812 usecs
[   36.800003] calling  sensors_max1619_init+0x0/0x11 @ 1
[   36.804006] bus: 'i2c': add driver max1619
[   36.808058] i2c-core: driver [max1619] registered
[   36.812005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   36.828004] i2c i2c-0: Transaction failed (0x10)!
[   36.832002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   36.844003] i2c i2c-0: Transaction failed (0x10)!
[   36.848002] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   36.860003] i2c i2c-0: Transaction failed (0x10)!
[   36.864002] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[   36.876003] i2c i2c-0: Transaction failed (0x10)!
[   36.880002] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[   36.892003] i2c i2c-0: Transaction failed (0x10)!
[   36.896002] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[   36.908003] i2c i2c-0: Transaction failed (0x10)!
[   36.912002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   36.924003] i2c i2c-0: Transaction failed (0x10)!
[   36.928002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   36.940003] i2c i2c-0: Transaction failed (0x10)!
[   36.944002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   36.956003] i2c i2c-0: Transaction failed (0x10)!
[   36.960007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   36.972004] i2c i2c-1: Transaction failed (0x10)!
[   36.976002] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   36.988003] i2c i2c-1: Transaction failed (0x10)!
[   36.992002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   37.004003] i2c i2c-1: Transaction failed (0x10)!
[   37.008002] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[   37.020003] i2c i2c-1: Transaction failed (0x10)!
[   37.024002] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[   37.036003] i2c i2c-1: Transaction failed (0x10)!
[   37.040002] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[   37.052004] i2c i2c-1: Transaction failed (0x10)!
[   37.056003] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   37.068004] i2c i2c-1: Transaction failed (0x10)!
[   37.072002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   37.084003] i2c i2c-1: Transaction failed (0x10)!
[   37.088002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   37.100003] i2c i2c-1: Transaction failed (0x10)!
[   37.104006] initcall sensors_max1619_init+0x0/0x11 returned 0 after 292968 usecs
[   37.112003] calling  sensors_max6650_init+0x0/0x11 @ 1
[   37.116004] bus: 'i2c': add driver max6650
[   37.120055] i2c-core: driver [max6650] registered
[   37.124005] i2c i2c-0: found normal entry for adapter 0, addr 0x1b
[   37.140004] i2c i2c-0: Transaction failed (0x10)!
[   37.144002] i2c i2c-0: found normal entry for adapter 0, addr 0x1f
[   37.156003] i2c i2c-0: Transaction failed (0x10)!
[   37.160002] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   37.172003] i2c i2c-0: Transaction failed (0x10)!
[   37.176002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   37.188003] i2c i2c-0: Transaction failed (0x10)!
[   37.192007] i2c i2c-1: found normal entry for adapter 1, addr 0x1b
[   37.204004] i2c i2c-1: Transaction failed (0x10)!
[   37.208002] i2c i2c-1: found normal entry for adapter 1, addr 0x1f
[   37.220003] i2c i2c-1: Transaction failed (0x10)!
[   37.224002] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   37.236003] i2c i2c-1: Transaction failed (0x10)!
[   37.240002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   37.252003] i2c i2c-1: Transaction failed (0x10)!
[   37.256006] initcall sensors_max6650_init+0x0/0x11 returned 0 after 136718 usecs
[   37.264003] calling  pc87360_init+0x0/0x13c @ 1
[   37.268015] pc87360: PC8736x not detected, module not inserted.
[   37.272003] initcall pc87360_init+0x0/0x13c returned -19 after 3906 usecs
[   37.280003] calling  pcf8591_init+0x0/0x32 @ 1
[   37.284004] bus: 'i2c': add driver pcf8591
[   37.288055] i2c-core: driver [pcf8591] registered
[   37.292005] i2c i2c-0: found normal entry for adapter 0, addr 0x48
[   37.308004] i2c i2c-0: Transaction failed (0x10)!
[   37.312002] i2c i2c-0: found normal entry for adapter 0, addr 0x49
[   37.324004] i2c i2c-0: Transaction failed (0x10)!
[   37.328002] i2c i2c-0: found normal entry for adapter 0, addr 0x4a
[   37.340003] i2c i2c-0: Transaction failed (0x10)!
[   37.344002] i2c i2c-0: found normal entry for adapter 0, addr 0x4b
[   37.356003] i2c i2c-0: Transaction failed (0x10)!
[   37.360002] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   37.372003] i2c i2c-0: Transaction failed (0x10)!
[   37.376002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   37.388003] i2c i2c-0: Transaction failed (0x10)!
[   37.392002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   37.404003] i2c i2c-0: Transaction failed (0x10)!
[   37.408002] i2c i2c-0: found normal entry for adapter 0, addr 0x4f
[   37.420003] i2c i2c-0: Transaction failed (0x10)!
[   37.424007] i2c i2c-1: found normal entry for adapter 1, addr 0x48
[   37.436004] i2c i2c-1: Transaction failed (0x10)!
[   37.440002] i2c i2c-1: found normal entry for adapter 1, addr 0x49
[   37.452003] i2c i2c-1: Transaction failed (0x10)!
[   37.456002] i2c i2c-1: found normal entry for adapter 1, addr 0x4a
[   37.468003] i2c i2c-1: Transaction failed (0x10)!
[   37.472002] i2c i2c-1: found normal entry for adapter 1, addr 0x4b
[   37.484003] i2c i2c-1: Transaction failed (0x10)!
[   37.488002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   37.500003] i2c i2c-1: Transaction failed (0x10)!
[   37.504002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   37.516003] i2c i2c-1: Transaction failed (0x10)!
[   37.520002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   37.532003] i2c i2c-1: Transaction failed (0x10)!
[   37.536002] i2c i2c-1: found normal entry for adapter 1, addr 0x4f
[   37.548003] i2c i2c-1: Transaction failed (0x10)!
[   37.552006] initcall pcf8591_init+0x0/0x32 returned 0 after 261718 usecs
[   37.556003] calling  sht15_init+0x0/0x4a @ 1
[   37.560005] bus: 'platform': add driver sht10
[   37.568071] bus: 'platform': add driver sht11
[   37.572059] bus: 'platform': add driver sht15
[   37.576058] bus: 'platform': add driver sht71
[   37.580058] bus: 'platform': add driver sht75
[   37.584058] initcall sht15_init+0x0/0x4a returned 0 after 23437 usecs
[   37.592003] calling  sm_sis5595_init+0x0/0x16 @ 1
[   37.596014] bus: 'pci': add driver sis5595
[   37.600077] initcall sm_sis5595_init+0x0/0x16 returned 0 after 3906 usecs
[   37.604004] calling  smsc47b397_init+0x0/0x147 @ 1
[   37.612010] initcall smsc47b397_init+0x0/0x147 returned -19 after 0 usecs
[   37.616003] calling  sm_smsc47m1_init+0x0/0x21f @ 1
[   37.624010] initcall sm_smsc47m1_init+0x0/0x21f returned -19 after 0 usecs
[   37.628003] calling  smsc47m192_init+0x0/0x11 @ 1
[   37.636005] bus: 'i2c': add driver smsc47m192
[   37.640055] i2c-core: driver [smsc47m192] registered
[   37.644005] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   37.656004] i2c i2c-0: Transaction failed (0x10)!
[   37.660002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   37.668001] PPS event at 4294901713
[   37.672004] i2c i2c-0: Transaction failed (0x10)!
[   37.676007] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   37.688004] i2c i2c-1: Transaction failed (0x10)!
[   37.692002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   37.704004] i2c i2c-1: Transaction failed (0x10)!
[   37.708006] initcall smsc47m192_init+0x0/0x11 returned 0 after 70312 usecs
[   37.712003] calling  amc6821_init+0x0/0x11 @ 1
[   37.720004] bus: 'i2c': add driver amc6821
[   37.724055] i2c-core: driver [amc6821] registered
[   37.728005] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[   37.740004] i2c i2c-0: Transaction failed (0x10)!
[   37.744002] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[   37.756004] i2c i2c-0: Transaction failed (0x10)!
[   37.760002] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[   37.772004] i2c i2c-0: Transaction failed (0x10)!
[   37.776002] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[   37.788004] i2c i2c-0: Transaction failed (0x10)!
[   37.792002] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[   37.804007] i2c i2c-0: Transaction failed (0x10)!
[   37.808002] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   37.820004] i2c i2c-0: Transaction failed (0x10)!
[   37.824003] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[   37.836004] i2c i2c-0: Transaction failed (0x10)!
[   37.840002] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[   37.852004] i2c i2c-0: Transaction failed (0x10)!
[   37.856002] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[   37.868003] i2c i2c-0: Transaction failed (0x10)!
[   37.872007] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[   37.884004] i2c i2c-1: Transaction failed (0x10)!
[   37.888002] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[   37.900003] i2c i2c-1: Transaction failed (0x10)!
[   37.904002] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[   37.916004] i2c i2c-1: Transaction failed (0x10)!
[   37.920002] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[   37.932003] i2c i2c-1: Transaction failed (0x10)!
[   37.936002] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[   37.948003] i2c i2c-1: Transaction failed (0x10)!
[   37.952002] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   37.964003] i2c i2c-1: Transaction failed (0x10)!
[   37.968002] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[   37.980003] i2c i2c-1: Transaction failed (0x10)!
[   37.984002] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[   37.996003] i2c i2c-1: Transaction failed (0x10)!
[   38.000002] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[   38.012003] i2c i2c-1: Transaction failed (0x10)!
[   38.016006] initcall amc6821_init+0x0/0x11 returned 0 after 289062 usecs
[   38.020003] calling  tmp102_init+0x0/0x11 @ 1
[   38.024004] bus: 'i2c': add driver tmp102
[   38.028055] i2c-core: driver [tmp102] registered
[   38.036004] initcall tmp102_init+0x0/0x11 returned 0 after 11718 usecs
[   38.040003] calling  via_cputemp_init+0x0/0x13f @ 1
[   38.044002] via_cputemp: Not a VIA CPU
[   38.048003] initcall via_cputemp_init+0x0/0x13f returned -19 after 3906 usecs
[   38.056003] calling  sm_vt8231_init+0x0/0x16 @ 1
[   38.060014] bus: 'pci': add driver vt8231
[   38.064075] initcall sm_vt8231_init+0x0/0x16 returned 0 after 3906 usecs
[   38.072004] calling  sensors_w83l785ts_init+0x0/0x11 @ 1
[   38.076005] bus: 'i2c': add driver w83l785ts
[   38.080057] i2c-core: driver [w83l785ts] registered
[   38.088005] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   38.100004] i2c i2c-0: Transaction failed (0x10)!
[   38.104007] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   38.116004] i2c i2c-1: Transaction failed (0x10)!
[   38.120006] initcall sensors_w83l785ts_init+0x0/0x11 returned 0 after 42968 usecs
[   38.128004] calling  sensors_w83l786ng_init+0x0/0x11 @ 1
[   38.132004] bus: 'i2c': add driver w83l786ng
[   38.136055] i2c-core: driver [w83l786ng] registered
[   38.140005] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[   38.156004] i2c i2c-0: Transaction failed (0x10)!
[   38.160002] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[   38.172003] i2c i2c-0: Transaction failed (0x10)!
[   38.176007] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[   38.188004] i2c i2c-1: Transaction failed (0x10)!
[   38.192002] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[   38.204003] i2c i2c-1: Transaction failed (0x10)!
[   38.208006] initcall sensors_w83l786ng_init+0x0/0x11 returned 0 after 74218 usecs
[   38.216003] calling  wm831x_hwmon_init+0x0/0xf @ 1
[   38.220006] bus: 'platform': add driver wm831x-hwmon
[   38.224059] initcall wm831x_hwmon_init+0x0/0xf returned 0 after 3906 usecs
[   38.232003] calling  pcwd_init_module+0x0/0x14 @ 1
[   38.236003] bus: 'isa': add driver pcwd
[   38.240063] device: 'pcwd.0': device_add
[   38.244008] bus: 'isa': add device pcwd.0
[   38.248013] PM: Adding info for isa:pcwd.0
[   38.252053] device: 'pcwd.0': device_unregister
[   38.256002] PM: Removing info for isa:pcwd.0
[   38.260022] bus: 'isa': remove device pcwd.0
[   38.264059] device: 'pcwd.1': device_add
[   38.268006] bus: 'isa': add device pcwd.1
[   38.272011] PM: Adding info for isa:pcwd.1
[   38.276051] device: 'pcwd.1': device_unregister
[   38.280002] PM: Removing info for isa:pcwd.1
[   38.284020] bus: 'isa': remove device pcwd.1
[   38.292039] device: 'pcwd.2': device_add
[   38.295957] bus: 'isa': add device pcwd.2
[   38.300011] PM: Adding info for isa:pcwd.2
[   38.304052] device: 'pcwd.2': device_unregister
[   38.308002] PM: Removing info for isa:pcwd.2
[   38.312020] bus: 'isa': remove device pcwd.2
[   38.316062] bus: 'isa': remove driver pcwd
[   38.320050] driver: 'pcwd': driver_release
[   38.324007] initcall pcwd_init_module+0x0/0x14 returned -19 after 85937 usecs
[   38.332003] calling  mixcomwd_init+0x0/0xf7 @ 1
[   38.336086] mixcomwd: No card detected, or port not available.
[   38.340004] initcall mixcomwd_init+0x0/0xf7 returned -19 after 3906 usecs
[   38.348003] calling  wdtpci_init+0x0/0x16 @ 1
[   38.352014] bus: 'pci': add driver wdt_pci
[   38.356068] initcall wdtpci_init+0x0/0x16 returned 0 after 3906 usecs
[   38.364003] calling  usb_pcwd_init+0x0/0x3c @ 1
[   38.368009] bus: 'usb': add driver pcwd_usb
[   38.372065] usbcore: registered new interface driver pcwd_usb
[   38.376002] pcwd_usb: Berkshire USB-PC Watchdog driver v1.02
[   38.384004] initcall usb_pcwd_init+0x0/0x3c returned 0 after 15625 usecs
[   38.388003] calling  acq_init+0x0/0x50 @ 1
[   38.392002] WDT driver for Acquire single board computer initialising.
[   38.400006] bus: 'platform': add driver acquirewdt
[   38.404060] Registering platform device 'acquirewdt'. Parent at platform
[   38.412003] device: 'acquirewdt': device_add
[   38.416006] bus: 'platform': add device acquirewdt
[   38.420013] PM: Adding info for platform:acquirewdt
[   38.424058] bus: 'platform': driver_probe_device: matched device acquirewdt with driver acquirewdt
[   38.436002] bus: 'platform': really_probe: probing driver acquirewdt with device acquirewdt
[   38.444010] acquirewdt: I/O address 0x0043 already in use
[   38.448009] acquirewdt: probe of acquirewdt failed with error -5
[   38.456004] initcall acq_init+0x0/0x50 returned 0 after 62500 usecs
[   38.460003] calling  watchdog_init+0x0/0x146 @ 1
[   38.464014] initcall watchdog_init+0x0/0x146 returned -19 after 0 usecs
[   38.472003] calling  geodewdt_init+0x0/0x45 @ 1
[   38.476005] bus: 'platform': add driver geodewdt
[   38.480060] Registering platform device 'geodewdt'. Parent at platform
[   38.488003] device: 'geodewdt': device_add
[   38.492015] bus: 'platform': add device geodewdt
[   38.496013] PM: Adding info for platform:geodewdt
[   38.500057] bus: 'platform': driver_probe_device: matched device geodewdt with driver geodewdt
[   38.512002] bus: 'platform': really_probe: probing driver geodewdt with device geodewdt
[   38.520006] geodewdt:  No timers were available
[   38.524014] initcall geodewdt_init+0x0/0x45 returned 0 after 46875 usecs
[   38.528003] calling  sc520_wdt_init+0x0/0xd0 @ 1
[   38.532020] device: 'watchdog': device_add
[   38.540139] PM: Adding info for No Bus:watchdog
[   38.544053] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=1)
[   38.552005] initcall sc520_wdt_init+0x0/0xd0 returned 0 after 19531 usecs
[   38.556003] calling  ibmasr_init+0x0/0x235 @ 1
[   38.560004] initcall ibmasr_init+0x0/0x235 returned -19 after 0 usecs
[   38.568003] calling  wafwdt_init+0x0/0x141 @ 1
[   38.572002] WDT driver for Wafer 5823 single board computer initialising.
[   38.580005] Wafer 5823 WDT: cannot register miscdev on minor=130 (err=-16)
[   38.588009] initcall wafwdt_init+0x0/0x141 returned -16 after 15625 usecs
[   38.592006] initcall wafwdt_init+0x0/0x141 returned with error code -16 
[   38.600003] calling  watchdog_init+0x0/0x16 @ 1
[   38.604017] bus: 'pci': add driver i6300ESB timer
[   38.608078] initcall watchdog_init+0x0/0x16 returned 0 after 3906 usecs
[   38.616004] calling  iTCO_wdt_init_module+0x0/0x56 @ 1
[   38.620002] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   38.628006] bus: 'platform': add driver iTCO_wdt
[   38.632065] Registering platform device 'iTCO_wdt'. Parent at platform
[   38.636003] device: 'iTCO_wdt': device_add
[   38.640006] bus: 'platform': add device iTCO_wdt
[   38.648013] PM: Adding info for platform:iTCO_wdt
[   38.652064] bus: 'platform': driver_probe_device: matched device iTCO_wdt with driver iTCO_wdt
[   38.660002] bus: 'platform': really_probe: probing driver iTCO_wdt with device iTCO_wdt
[   38.668002] PPS event at 4294901963
[   38.672094] iTCO_wdt: No card detected
[   38.676011] initcall iTCO_wdt_init_module+0x0/0x56 returned 0 after 54687 usecs
[   38.684003] calling  iTCO_vendor_init_module+0x0/0x17 @ 1
[   38.688002] iTCO_vendor_support: vendor-support=0
[   38.692004] initcall iTCO_vendor_init_module+0x0/0x17 returned 0 after 3906 usecs
[   38.700003] calling  it87_wdt_init+0x0/0x460 @ 1
[   38.704021] IT87 WDT: Unsupported Chip found, Chip 8712 Revision 07
[   38.712004] initcall it87_wdt_init+0x0/0x460 returned -19 after 7812 usecs
[   38.716003] calling  hpwdt_init+0x0/0x16 @ 1
[   38.724014] bus: 'pci': add driver hpwdt
[   38.727931] initcall hpwdt_init+0x0/0x16 returned 0 after 3906 usecs
[   38.732003] calling  scx200_wdt_init+0x0/0xd9 @ 1
[   38.736002] scx200_wdt: NatSemi SCx200 Watchdog Driver
[   38.744004] initcall scx200_wdt_init+0x0/0xd9 returned -19 after 7812 usecs
[   38.748003] calling  sbc60xxwdt_init+0x0/0x15a @ 1
[   38.752004] sbc60xxwdt: cannot register miscdev on minor=130 (err=-16)
[   38.760006] initcall sbc60xxwdt_init+0x0/0x15a returned -16 after 7812 usecs
[   38.768004] initcall sbc60xxwdt_init+0x0/0x15a returned with error code -16 
[   38.776003] calling  sbc7240_wdt_init+0x0/0xf6 @ 1
[   38.780003] sbc7240_wdt: timeout set to 30 seconds
[   38.784003] sbc7240_wdt: cannot register miscdev on minor=130 (err=-16)
[   38.792006] initcall sbc7240_wdt_init+0x0/0xf6 returned -16 after 11718 usecs
[   38.796004] initcall sbc7240_wdt_init+0x0/0xf6 returned with error code -16 
[   38.804008] calling  sch311x_wdt_init+0x0/0x12b @ 1
[   38.808022] initcall sch311x_wdt_init+0x0/0x12b returned -19 after 0 usecs
[   38.816003] calling  wb_smsc_wdt_init+0x0/0x184 @ 1
[   38.820003] SMsC 37B787 watchdog component driver 1.1 initialising...
[   38.829023] smsc37b787_wdt: Unable to register miscdev on minor 130
[   38.832011] initcall wb_smsc_wdt_init+0x0/0x184 returned -16 after 11718 usecs
[   38.836004] initcall wb_smsc_wdt_init+0x0/0x184 returned with error code -16 
[   38.840004] calling  wdt_init+0x0/0x1b5 @ 1
[   38.844003] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.
[   38.848020] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec
[   38.852016] w83627hf/thf/hg WDT: cannot register miscdev on minor=130 (err=-16)
[   38.856007] initcall wdt_init+0x0/0x1b5 returned -16 after 11718 usecs
[   38.860003] initcall wdt_init+0x0/0x1b5 returned with error code -16 
[   38.864004] calling  w83977f_wdt_init+0x0/0x126 @ 1
[   38.868002] W83977F WDT: W83977F WDT driver, v1.00
[   38.872004] W83977F WDT: cannot register miscdev on minor=130 (err=-16)
[   38.876006] initcall w83977f_wdt_init+0x0/0x126 returned -16 after 7812 usecs
[   38.880004] initcall w83977f_wdt_init+0x0/0x126 returned with error code -16 
[   38.884003] calling  zf_init+0x0/0x142 @ 1
[   38.888002] machzwd: MachZ ZF-Logic Watchdog driver initializing.
[   38.892004] machzwd: no ZF-Logic found
[   38.896004] initcall zf_init+0x0/0x142 returned -19 after 7812 usecs
[   38.900003] calling  watchdog_init+0x0/0xa0 @ 1
[   38.904004] epx_c3: cannot register miscdev on minor=130 (err=-16)
[   38.908006] initcall watchdog_init+0x0/0xa0 returned -16 after 3906 usecs
[   38.912004] initcall watchdog_init+0x0/0xa0 returned with error code -16 
[   38.916004] calling  wm831x_wdt_init+0x0/0xf @ 1
[   38.920010] bus: 'platform': add driver wm831x-watchdog
[   38.924078] initcall wm831x_wdt_init+0x0/0xf returned 0 after 3906 usecs
[   38.928005] calling  watchdog_init+0x0/0xa0 @ 1
[   38.932003] SoftDog: cannot register miscdev on minor=130 (err=-16)
[   38.936004] initcall watchdog_init+0x0/0xa0 returned -16 after 3906 usecs
[   38.940004] initcall watchdog_init+0x0/0xa0 returned with error code -16 
[   38.944003] calling  linear_init+0x0/0xf @ 1
[   38.948002] md: linear personality registered for level -1
[   38.952004] initcall linear_init+0x0/0xf returned 0 after 3906 usecs
[   38.956004] calling  raid0_init+0x0/0xf @ 1
[   38.960002] md: raid0 personality registered for level 0
[   38.964004] initcall raid0_init+0x0/0xf returned 0 after 3906 usecs
[   38.968004] calling  raid_init+0x0/0xf @ 1
[   38.972002] md: raid1 personality registered for level 1
[   38.976004] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   38.980003] calling  raid_init+0x0/0xf @ 1
[   38.984002] md: raid10 personality registered for level 10
[   38.988004] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   38.992003] calling  raid5_init+0x0/0x25 @ 1
[   38.996002] md: raid6 personality registered for level 6
[   39.000003] md: raid5 personality registered for level 5
[   39.004002] md: raid4 personality registered for level 4
[   39.008004] initcall raid5_init+0x0/0x25 returned 0 after 11718 usecs
[   39.012004] calling  multipath_init+0x0/0xf @ 1
[   39.016002] md: multipath personality registered for level -4
[   39.020004] initcall multipath_init+0x0/0xf returned 0 after 3906 usecs
[   39.024004] calling  raid_init+0x0/0xf @ 1
[   39.028002] md: faulty personality registered for level -5
[   39.032003] initcall raid_init+0x0/0xf returned 0 after 3906 usecs
[   39.036004] calling  vhci_init+0x0/0x1e @ 1
[   39.040002] Bluetooth: Virtual HCI driver ver 1.3
[   39.044008] device: 'vhci': device_add
[   39.048177] PM: Adding info for No Bus:vhci
[   39.052056] initcall vhci_init+0x0/0x1e returned 0 after 11718 usecs
[   39.056003] calling  bcm203x_init+0x0/0x44 @ 1
[   39.060003] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[   39.064011] bus: 'usb': add driver bcm203x
[   39.068068] usbcore: registered new interface driver bcm203x
[   39.072005] initcall bcm203x_init+0x0/0x44 returned 0 after 11718 usecs
[   39.076003] calling  bpa10x_init+0x0/0x25 @ 1
[   39.080002] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[   39.084007] bus: 'usb': add driver bpa10x
[   39.088059] usbcore: registered new interface driver bpa10x
[   39.092004] initcall bpa10x_init+0x0/0x25 returned 0 after 11718 usecs
[   39.096004] calling  bfusb_init+0x0/0x44 @ 1
[   39.100002] Bluetooth: BlueFRITZ! USB driver ver 1.2
[   39.104006] bus: 'usb': add driver bfusb
[   39.108059] usbcore: registered new interface driver bfusb
[   39.112004] initcall bfusb_init+0x0/0x44 returned 0 after 11718 usecs
[   39.116003] calling  btusb_init+0x0/0x25 @ 1
[   39.120002] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   39.124006] bus: 'usb': add driver btusb
[   39.128059] usbcore: registered new interface driver btusb
[   39.132004] initcall btusb_init+0x0/0x25 returned 0 after 11718 usecs
[   39.136003] calling  kcapi_init+0x0/0x26 @ 1
[   39.140072] initcall kcapi_init+0x0/0x26 returned 0 after 0 usecs
[   39.144005] calling  capi_init+0x0/0x22f @ 1
[   39.148009] device class 'capi': registering
[   39.152066] device: 'capi': device_add
[   39.156110] PM: Adding info for No Bus:capi
[   39.160070] CAPI 2.0 started up with major 68 (middleware+capifs)
[   39.164005] initcall capi_init+0x0/0x22f returned 0 after 15625 usecs
[   39.168005] calling  capifs_init+0x0/0xf @ 1
[   39.172013] initcall capifs_init+0x0/0xf returned 0 after 0 usecs
[   39.176004] calling  gigaset_init_module+0x0/0x29 @ 1
[   39.180002] gigaset: Driver for Gigaset 307x (debug build)
[   39.184002] gigaset: Kernel CAPI interface
[   39.188004] initcall gigaset_init_module+0x0/0x29 returned 0 after 7812 usecs
[   39.192004] calling  usb_gigaset_init+0x0/0x81 @ 1
[   39.196033] bus: 'usb': add driver usb_gigaset
[   39.200065] usbcore: registered new interface driver usb_gigaset
[   39.204002] usb_gigaset: USB Driver for Gigaset 307x using M105
[   39.208004] initcall usb_gigaset_init+0x0/0x81 returned 0 after 11718 usecs
[   39.212003] calling  cpufreq_stats_init+0x0/0xa8 @ 1
[   39.216008] initcall cpufreq_stats_init+0x0/0xa8 returned 0 after 0 usecs
[   39.220003] calling  cpufreq_gov_powersave_init+0x0/0xf @ 1
[   39.224005] initcall cpufreq_gov_powersave_init+0x0/0xf returned 0 after 0 usecs
[   39.228004] calling  cpufreq_gov_userspace_init+0x0/0xf @ 1
[   39.232004] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 0 usecs
[   39.236003] calling  init_ladder+0x0/0xf @ 1
[   39.240004] cpuidle: using governor ladder
[   39.244004] initcall init_ladder+0x0/0xf returned 0 after 3906 usecs
[   39.248004] calling  init_menu+0x0/0xf @ 1
[   39.252002] cpuidle: using governor menu
[   39.256004] initcall init_menu+0x0/0xf returned 0 after 3906 usecs
[   39.260003] calling  memstick_init+0x0/0x6f @ 1
[   39.264087] bus: 'memstick': registered
[   39.268003] device class 'memstick_host': registering
[   39.272063] initcall memstick_init+0x0/0x6f returned 0 after 7812 usecs
[   39.280004] calling  mspro_block_init+0x0/0x63 @ 1
[   39.284004] bus: 'memstick': add driver mspro_block
[   39.288056] initcall mspro_block_init+0x0/0x63 returned 0 after 3906 usecs
[   39.296003] calling  tifm_ms_init+0x0/0xf @ 1
[   39.300003] bus: 'tifm': add driver tifm_ms
[   39.304056] initcall tifm_ms_init+0x0/0xf returned 0 after 3906 usecs
[   39.312003] calling  jmb38x_ms_init+0x0/0x16 @ 1
[   39.316015] bus: 'pci': add driver jmb38x_ms
[   39.320066] initcall jmb38x_ms_init+0x0/0x16 returned 0 after 3906 usecs
[   39.328004] calling  bd2802_init+0x0/0x11 @ 1
[   39.332007] bus: 'i2c': add driver BD2802
[   39.336072] i2c-core: driver [BD2802] registered
[   39.340005] initcall bd2802_init+0x0/0x11 returned 0 after 7812 usecs
[   39.348003] calling  pca9532_init+0x0/0x11 @ 1
[   39.352005] bus: 'i2c': add driver pca9532
[   39.356054] i2c-core: driver [pca9532] registered
[   39.360004] initcall pca9532_init+0x0/0x11 returned 0 after 7812 usecs
[   39.368003] calling  lp3944_module_init+0x0/0x11 @ 1
[   39.372004] bus: 'i2c': add driver lp3944
[   39.376054] i2c-core: driver [lp3944] registered
[   39.380004] initcall lp3944_module_init+0x0/0x11 returned 0 after 7812 usecs
[   39.388003] calling  regulator_led_init+0x0/0xf @ 1
[   39.392006] bus: 'platform': add driver leds-regulator
[   39.396062] initcall regulator_led_init+0x0/0xf returned 0 after 3906 usecs
[   39.404003] calling  timer_trig_init+0x0/0xf @ 1
[   39.408004] initcall timer_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.416003] calling  heartbeat_trig_init+0x0/0xf @ 1
[   39.420003] initcall heartbeat_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.428002] calling  bl_trig_init+0x0/0xf @ 1
[   39.432003] initcall bl_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.436003] calling  gpio_trig_init+0x0/0xf @ 1
[   39.440003] initcall gpio_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.448002] calling  defon_trig_init+0x0/0xf @ 1
[   39.452003] initcall defon_trig_init+0x0/0xf returned 0 after 0 usecs
[   39.460002] calling  ib_core_init+0x0/0x3a @ 1
[   39.464002] device class 'infiniband': registering
[   39.468054] initcall ib_core_init+0x0/0x3a returned 0 after 3906 usecs
[   39.476003] calling  ib_mad_init_module+0x0/0xbf @ 1
[   39.480185] initcall ib_mad_init_module+0x0/0xbf returned 0 after 0 usecs
[   39.488003] calling  ib_sa_init+0x0/0x57 @ 1
[   39.492060] initcall ib_sa_init+0x0/0x57 returned 0 after 0 usecs
[   39.496003] calling  ib_cm_init+0x0/0x156 @ 1
[   39.500030] device class 'infiniband_cm': registering
[   39.504070] initcall ib_cm_init+0x0/0x156 returned 0 after 3906 usecs
[   39.508003] calling  iw_cm_init+0x0/0x2c @ 1
[   39.512049] initcall iw_cm_init+0x0/0x2c returned 0 after 0 usecs
[   39.520004] calling  addr_init+0x0/0x3b @ 1
[   39.524042] initcall addr_init+0x0/0x3b returned 0 after 0 usecs
[   39.528005] calling  cma_init+0x0/0x89 @ 1
[   39.532042] initcall cma_init+0x0/0x89 returned 0 after 0 usecs
[   39.536003] calling  ib_umad_init+0x0/0xa9 @ 1
[   39.540005] device class 'infiniband_mad': registering
[   39.544060] initcall ib_umad_init+0x0/0xa9 returned 0 after 3906 usecs
[   39.552003] calling  ib_uverbs_init+0x0/0xa9 @ 1
[   39.556004] device class 'infiniband_verbs': registering
[   39.564064] initcall ib_uverbs_init+0x0/0xa9 returned 0 after 7812 usecs
[   39.568003] calling  ib_ucm_init+0x0/0x8d @ 1
[   39.572014] initcall ib_ucm_init+0x0/0x8d returned 0 after 0 usecs
[   39.580003] calling  ucma_init+0x0/0x45 @ 1
[   39.584008] device: 'rdma_cm': device_add
[   39.588174] PM: Adding info for No Bus:rdma_cm
[   39.592056] initcall ucma_init+0x0/0x45 returned 0 after 7812 usecs
[   39.600003] calling  iwch_init_module+0x0/0x33 @ 1
[   39.605299] initcall iwch_init_module+0x0/0x33 returned 0 after 0 usecs
[   39.608004] calling  c4iw_init_module+0x0/0x42 @ 1
[   39.612052] initcall c4iw_init_module+0x0/0x42 returned 0 after 0 usecs
[   39.620003] calling  mlx4_ib_init+0x0/0xf @ 1
[   39.624003] initcall mlx4_ib_init+0x0/0xf returned 0 after 0 usecs
[   39.628003] calling  ipoib_init_module+0x0/0xf3 @ 1
[   39.636079] initcall ipoib_init_module+0x0/0xf3 returned 0 after 0 usecs
[   39.640003] calling  dcdbas_init+0x0/0x53 @ 1
[   39.644009] bus: 'platform': add driver dcdbas
[   39.652019] Registering platform device 'dcdbas'. Parent at platform
[   39.656003] device: 'dcdbas': device_add
[   39.660009] bus: 'platform': add device dcdbas
[   39.664015] PM: Adding info for platform:dcdbas
[   39.668074] bus: 'platform': driver_probe_device: matched device dcdbas with driver dcdbas
[   39.672003] bus: 'platform': really_probe: probing driver dcdbas with device dcdbas
[   39.672003] PPS event at 4294902214
[   39.676018] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   39.680002] driver: 'dcdbas': driver_bound: bound to device 'dcdbas'
[   39.684003] bus: 'platform': really_probe: bound device dcdbas to driver dcdbas
[   39.692006] initcall dcdbas_init+0x0/0x53 returned 0 after 46875 usecs
[   39.696003] calling  padlock_init+0x0/0xc4 @ 1
[   39.700002] padlock: VIA PadLock not detected.
[   39.704003] initcall padlock_init+0x0/0xc4 returned -19 after 3906 usecs
[   39.708003] calling  padlock_init+0x0/0x6e @ 1
[   39.712002] padlock: VIA PadLock Hash Engine not detected.
[   39.716003] initcall padlock_init+0x0/0x6e returned -19 after 3906 usecs
[   39.720003] calling  hifn_init+0x0/0x98 @ 1
[   39.724018] bus: 'pci': add driver hifn795x
[   39.728085] Driver for HIFN 795x crypto accelerator chip has been successfully registered.
[   39.732004] initcall hifn_init+0x0/0x98 returned 0 after 7812 usecs
[   39.736003] calling  init_hrt_clocksource+0x0/0x134 @ 1
[   39.740003] initcall init_hrt_clocksource+0x0/0x134 returned -19 after 0 usecs
[   39.744004] calling  cs5535_mfgpt_init+0x0/0x174 @ 1
[   39.748003] cs5535-clockevt: Could not allocate MFPGT timer
[   39.752003] initcall cs5535_mfgpt_init+0x0/0x174 returned -19 after 3906 usecs
[   39.756003] calling  hid_init+0x0/0x58 @ 1
[   39.760072] bus: 'hid': registered
[   39.763476] device class 'hidraw': registering
[   39.768042] initcall hid_init+0x0/0x58 returned 0 after 7812 usecs
[   39.772004] calling  mmm_init+0x0/0x16 @ 1
[   39.776002] bus: 'hid': add driver 3m-pct
[   39.780057] initcall mmm_init+0x0/0x16 returned 0 after 3906 usecs
[   39.784003] calling  a4_init+0x0/0x16 @ 1
[   39.788002] bus: 'hid': add driver a4tech
[   39.792056] initcall a4_init+0x0/0x16 returned 0 after 3906 usecs
[   39.796003] calling  apple_init+0x0/0x2d @ 1
[   39.800002] bus: 'hid': add driver apple
[   39.804056] initcall apple_init+0x0/0x2d returned 0 after 3906 usecs
[   39.808003] calling  ch_init+0x0/0x16 @ 1
[   39.812003] bus: 'hid': add driver chicony
[   39.816066] initcall ch_init+0x0/0x16 returned 0 after 3906 usecs
[   39.820003] calling  cp_init+0x0/0x16 @ 1
[   39.824002] bus: 'hid': add driver cypress
[   39.828056] initcall cp_init+0x0/0x16 returned 0 after 3906 usecs
[   39.832003] calling  dr_init+0x0/0x16 @ 1
[   39.836002] bus: 'hid': add driver dragonrise
[   39.840056] initcall dr_init+0x0/0x16 returned 0 after 3906 usecs
[   39.844003] calling  egalax_init+0x0/0x16 @ 1
[   39.848002] bus: 'hid': add driver egalax-touch
[   39.852057] initcall egalax_init+0x0/0x16 returned 0 after 3906 usecs
[   39.856003] calling  ez_init+0x0/0x16 @ 1
[   39.860002] bus: 'hid': add driver ezkey
[   39.864076] initcall ez_init+0x0/0x16 returned 0 after 3906 usecs
[   39.868003] calling  gyration_init+0x0/0x16 @ 1
[   39.872002] bus: 'hid': add driver gyration
[   39.876057] initcall gyration_init+0x0/0x16 returned 0 after 3906 usecs
[   39.880003] calling  kye_init+0x0/0x16 @ 1
[   39.884002] bus: 'hid': add driver kye
[   39.888056] initcall kye_init+0x0/0x16 returned 0 after 3906 usecs
[   39.892003] calling  lg_init+0x0/0x16 @ 1
[   39.896002] bus: 'hid': add driver logitech
[   39.900056] initcall lg_init+0x0/0x16 returned 0 after 3906 usecs
[   39.904003] calling  magicmouse_init+0x0/0x2d @ 1
[   39.908002] bus: 'hid': add driver magicmouse
[   39.912056] initcall magicmouse_init+0x0/0x2d returned 0 after 3906 usecs
[   39.916003] calling  mr_init+0x0/0x16 @ 1
[   39.920002] bus: 'hid': add driver monterey
[   39.924056] initcall mr_init+0x0/0x16 returned 0 after 3906 usecs
[   39.928003] calling  mosart_init+0x0/0x16 @ 1
[   39.932003] bus: 'hid': add driver mosart
[   39.936056] initcall mosart_init+0x0/0x16 returned 0 after 3906 usecs
[   39.940003] calling  ntrig_init+0x0/0x16 @ 1
[   39.944002] bus: 'hid': add driver ntrig
[   39.948056] initcall ntrig_init+0x0/0x16 returned 0 after 3906 usecs
[   39.952003] calling  ortek_init+0x0/0x16 @ 1
[   39.956002] bus: 'hid': add driver ortek
[   39.960066] initcall ortek_init+0x0/0x16 returned 0 after 3906 usecs
[   39.964003] calling  quanta_init+0x0/0x16 @ 1
[   39.968002] bus: 'hid': add driver quanta-touch
[   39.972069] initcall quanta_init+0x0/0x16 returned 0 after 3906 usecs
[   39.976003] calling  pl_init+0x0/0x16 @ 1
[   39.980002] bus: 'hid': add driver pantherlord
[   39.984056] initcall pl_init+0x0/0x16 returned 0 after 3906 usecs
[   39.988003] calling  pl_init+0x0/0x16 @ 1
[   39.992002] bus: 'hid': add driver petalynx
[   39.996056] initcall pl_init+0x0/0x16 returned 0 after 3906 usecs
[   40.000003] calling  picolcd_init+0x0/0x16 @ 1
[   40.004003] bus: 'hid': add driver hid-picolcd
[   40.008056] initcall picolcd_init+0x0/0x16 returned 0 after 3906 usecs
[   40.012004] calling  roccat_init+0x0/0x92 @ 1
[   40.016004] device class 'roccat': registering
[   40.020056] initcall roccat_init+0x0/0x92 returned 0 after 3906 usecs
[   40.024003] calling  kone_init+0x0/0x16 @ 1
[   40.028002] bus: 'hid': add driver kone
[   40.032057] initcall kone_init+0x0/0x16 returned 0 after 3906 usecs
[   40.036003] calling  samsung_init+0x0/0x16 @ 1
[   40.040002] bus: 'hid': add driver samsung
[   40.044056] initcall samsung_init+0x0/0x16 returned 0 after 3906 usecs
[   40.048003] calling  sjoy_init+0x0/0x16 @ 1
[   40.052003] bus: 'hid': add driver smartjoyplus
[   40.056057] initcall sjoy_init+0x0/0x16 returned 0 after 3906 usecs
[   40.060003] calling  sony_init+0x0/0x16 @ 1
[   40.064002] bus: 'hid': add driver sony
[   40.068074] initcall sony_init+0x0/0x16 returned 0 after 3906 usecs
[   40.072003] calling  stantum_init+0x0/0x16 @ 1
[   40.076002] bus: 'hid': add driver stantum
[   40.080058] initcall stantum_init+0x0/0x16 returned 0 after 3906 usecs
[   40.084003] calling  sp_init+0x0/0x16 @ 1
[   40.088002] bus: 'hid': add driver sunplus
[   40.092057] initcall sp_init+0x0/0x16 returned 0 after 3906 usecs
[   40.096003] calling  ga_init+0x0/0x16 @ 1
[   40.100002] bus: 'hid': add driver greenasia
[   40.104056] initcall ga_init+0x0/0x16 returned 0 after 3906 usecs
[   40.108003] calling  ts_init+0x0/0x16 @ 1
[   40.112002] bus: 'hid': add driver topseed
[   40.116056] initcall ts_init+0x0/0x16 returned 0 after 3906 usecs
[   40.120003] calling  twinhan_init+0x0/0x16 @ 1
[   40.124002] bus: 'hid': add driver twinhan
[   40.128056] initcall twinhan_init+0x0/0x16 returned 0 after 3906 usecs
[   40.132003] calling  zp_init+0x0/0x16 @ 1
[   40.136002] bus: 'hid': add driver zeroplus
[   40.140056] initcall zp_init+0x0/0x16 returned 0 after 3906 usecs
[   40.144003] calling  wacom_init+0x0/0x2d @ 1
[   40.148002] bus: 'hid': add driver wacom
[   40.152056] initcall wacom_init+0x0/0x2d returned 0 after 3906 usecs
[   40.156003] calling  hid_init+0x0/0x9a @ 1
[   40.160043] bus: 'hid': add driver generic-usb
[   40.164074] bus: 'usb': add driver usbhid
[   40.168067] usbcore: registered new interface driver usbhid
[   40.172001] usbhid: USB HID core driver
[   40.176004] initcall hid_init+0x0/0x9a returned 0 after 15625 usecs
[   40.184003] calling  dell_init+0x0/0x3c9 @ 1
[   40.188004] initcall dell_init+0x0/0x3c9 returned -19 after 0 usecs
[   40.192003] calling  oss_init+0x0/0x110 @ 1
[   40.196008] device: 'sequencer': device_add
[   40.200159] PM: Adding info for No Bus:sequencer
[   40.208057] device: 'sequencer2': device_add
[   40.212074] PM: Adding info for No Bus:sequencer2
[   40.216054] device: 'dspW': device_add
[   40.220084] PM: Adding info for No Bus:dspW
[   40.224055] device: 'audio': device_add
[   40.228077] PM: Adding info for No Bus:audio
[   40.232052] initcall oss_init+0x0/0x110 returned 0 after 35156 usecs
[   40.236003] calling  init_ad1848+0x0/0x1f9 @ 1
[   40.244002] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
[   40.248002] ad1848: No ISAPnP cards found, trying standard ones...
[   40.256003] initcall init_ad1848+0x0/0x1f9 returned 0 after 11718 usecs
[   40.264003] calling  init_pas2+0x0/0x430 @ 1
[   40.268002] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996
[   40.276001] I/O, IRQ, DMA and type are mandatory
[   40.280003] initcall init_pas2+0x0/0x430 returned -22 after 11718 usecs
[   40.284003] initcall init_pas2+0x0/0x430 returned with error code -22 
[   40.292003] calling  sb_init+0x0/0x1c5 @ 1
[   40.296002] sb: Init: Starting Probe...
[   40.300004] bus: 'pnp': add driver OSS SndBlstr
[   40.304055] sb: Init: Done
[   40.308012] bus: 'pnp': remove driver OSS SndBlstr
[   40.312049] driver: 'OSS SndBlstr': driver_release
[   40.316007] initcall sb_init+0x0/0x1c5 returned -19 after 19531 usecs
[   40.324003] calling  init_uart401+0x0/0x45 @ 1
[   40.328003] initcall init_uart401+0x0/0x45 returned 0 after 0 usecs
[   40.336003] calling  init_opl3+0x0/0x522 @ 1
[   40.340002] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
[   40.348003] initcall init_opl3+0x0/0x522 returned 0 after 7812 usecs
[   40.352003] calling  init_vmidi+0x0/0x2cb @ 1
[   40.356001] MIDI Loopback device driver
[   40.360007] device: 'midi': device_add
[   40.364075] PM: Adding info for No Bus:midi
[   40.368093] device: 'midi1': device_add
[   40.372078] PM: Adding info for No Bus:midi1
[   40.376071] initcall init_vmidi+0x0/0x2cb returned 0 after 19531 usecs
[   40.384004] calling  oprofile_init+0x0/0x4c @ 1
[   40.388003] Registering sysdev class 'oprofile'
[   40.392062] Registering sys device of class 'oprofile'
[   40.400005] Registering sys device 'oprofile0'
[   40.404045] oprofile: using NMI interrupt.
[   40.408013] initcall oprofile_init+0x0/0x4c returned 0 after 19531 usecs
[   40.412006] calling  flow_cache_init_global+0x0/0x159 @ 1
[   40.420204] initcall flow_cache_init_global+0x0/0x159 returned 0 after 0 usecs
[   40.428004] calling  pg_init+0x0/0x2d0 @ 1
[   40.432002] pktgen 2.73: Packet Generator for packet performance testing.
[   40.436044] initcall pg_init+0x0/0x2d0 returned 0 after 3906 usecs
[   40.440005] calling  llc_init+0x0/0x1b @ 1
[   40.444004] initcall llc_init+0x0/0x1b returned 0 after 0 usecs
[   40.448003] calling  snap_init+0x0/0x31 @ 1
[   40.452010] initcall snap_init+0x0/0x31 returned 0 after 0 usecs
[   40.456003] calling  rif_init+0x0/0x5b @ 1
[   40.460013] initcall rif_init+0x0/0x5b returned 0 after 0 usecs
[   40.464004] calling  nfnetlink_init+0x0/0x1e @ 1
[   40.468002] Netfilter messages via NETLINK v0.30.
[   40.472020] initcall nfnetlink_init+0x0/0x1e returned 0 after 3906 usecs
[   40.476004] calling  nfnetlink_log_init+0x0/0xb3 @ 1
[   40.480015] initcall nfnetlink_log_init+0x0/0xb3 returned 0 after 0 usecs
[   40.484003] calling  nf_conntrack_standalone_init+0x0/0xf @ 1
[   40.488004] nf_conntrack version 0.5.0 (15860 buckets, 63440 max)
[   40.496199] initcall nf_conntrack_standalone_init+0x0/0xf returned 0 after 7812 usecs
[   40.500005] calling  nf_conntrack_ftp_init+0x0/0x1d0 @ 1
[   40.504008] initcall nf_conntrack_ftp_init+0x0/0x1d0 returned 0 after 0 usecs
[   40.508003] calling  nf_conntrack_irc_init+0x0/0x17c @ 1
[   40.512008] initcall nf_conntrack_irc_init+0x0/0x17c returned 0 after 0 usecs
[   40.516003] calling  xt_init+0x0/0x11f @ 1
[   40.520008] initcall xt_init+0x0/0x11f returned 0 after 0 usecs
[   40.524004] calling  tcpudp_mt_init+0x0/0x14 @ 1
[   40.528005] initcall tcpudp_mt_init+0x0/0x14 returned 0 after 0 usecs
[   40.532004] calling  connsecmark_tg_init+0x0/0xf @ 1
[   40.536010] initcall connsecmark_tg_init+0x0/0xf returned 0 after 0 usecs
[   40.540003] calling  nflog_tg_init+0x0/0xf @ 1
[   40.544003] initcall nflog_tg_init+0x0/0xf returned 0 after 0 usecs
[   40.548003] calling  tcpmss_tg_init+0x0/0x14 @ 1
[   40.552004] initcall tcpmss_tg_init+0x0/0x14 returned 0 after 0 usecs
[   40.556003] calling  conntrack_mt_init+0x0/0x14 @ 1
[   40.560004] initcall conntrack_mt_init+0x0/0x14 returned 0 after 0 usecs
[   40.564003] calling  policy_mt_init+0x0/0x14 @ 1
[   40.568004] initcall policy_mt_init+0x0/0x14 returned 0 after 0 usecs
[   40.572004] calling  ip_vs_init+0x0/0xa5 @ 1
[   40.576069] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[   40.580176] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[   40.588021] IPVS: ipvs loaded.
[   40.591076] initcall ip_vs_init+0x0/0xa5 returned 0 after 11718 usecs
[   40.592003] calling  ip_vs_rr_init+0x0/0xf @ 1
[   40.596003] IPVS: [rr] scheduler registered.
[   40.600003] initcall ip_vs_rr_init+0x0/0xf returned 0 after 3906 usecs
[   40.604003] calling  ip_vs_wrr_init+0x0/0xf @ 1
[   40.608003] IPVS: [wrr] scheduler registered.
[   40.612004] initcall ip_vs_wrr_init+0x0/0xf returned 0 after 3906 usecs
[   40.616003] calling  ip_vs_lc_init+0x0/0xf @ 1
[   40.620003] IPVS: [lc] scheduler registered.
[   40.624003] initcall ip_vs_lc_init+0x0/0xf returned 0 after 3906 usecs
[   40.628003] calling  ip_vs_wlc_init+0x0/0xf @ 1
[   40.632003] IPVS: [wlc] scheduler registered.
[   40.636005] initcall ip_vs_wlc_init+0x0/0xf returned 0 after 3906 usecs
[   40.640004] calling  ip_vs_lblcr_init+0x0/0x37 @ 1
[   40.644003] IPVS: [lblcr] scheduler registered.
[   40.648003] initcall ip_vs_lblcr_init+0x0/0x37 returned 0 after 3906 usecs
[   40.652004] calling  ip_vs_dh_init+0x0/0xf @ 1
[   40.656003] IPVS: [dh] scheduler registered.
[   40.660003] initcall ip_vs_dh_init+0x0/0xf returned 0 after 3906 usecs
[   40.664003] calling  ip_vs_sh_init+0x0/0xf @ 1
[   40.668002] IPVS: [sh] scheduler registered.
[   40.672004] initcall ip_vs_sh_init+0x0/0xf returned 0 after 3906 usecs
[   40.672002] PPS event at 4294902464
[   40.676004] calling  ip_vs_sed_init+0x0/0xf @ 1
[   40.680003] IPVS: [sed] scheduler registered.
[   40.684004] initcall ip_vs_sed_init+0x0/0xf returned 0 after 3906 usecs
[   40.688004] calling  ipip_init+0x0/0x50 @ 1
[   40.692004] IPv4 over IPv4 tunneling driver
[   40.696041] device: 'tunl0': device_add
[   40.700085] PM: Adding info for No Bus:tunl0
[   40.704134] initcall ipip_init+0x0/0x50 returned 0 after 11718 usecs
[   40.708004] calling  ipgre_init+0x0/0x8b @ 1
[   40.716001] GRE over IPv4 tunneling driver
[   40.720022] device: 'gre0': device_add
[   40.723853] PM: Adding info for No Bus:gre0
[   40.728169] initcall ipgre_init+0x0/0x8b returned 0 after 11718 usecs
[   40.732004] calling  ah4_init+0x0/0x5a @ 1
[   40.736006] initcall ah4_init+0x0/0x5a returned 0 after 0 usecs
[   40.744003] calling  esp4_init+0x0/0x5a @ 1
[   40.748004] initcall esp4_init+0x0/0x5a returned 0 after 0 usecs
[   40.752003] calling  tunnel4_init+0x0/0x2c @ 1
[   40.756005] initcall tunnel4_init+0x0/0x2c returned 0 after 0 usecs
[   40.764003] calling  xfrm4_transport_init+0x0/0x14 @ 1
[   40.768004] initcall xfrm4_transport_init+0x0/0x14 returned 0 after 0 usecs
[   40.776003] calling  xfrm4_mode_tunnel_init+0x0/0x14 @ 1
[   40.780004] initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 0 usecs
[   40.788004] calling  ipv4_netfilter_init+0x0/0xf @ 1
[   40.792008] initcall ipv4_netfilter_init+0x0/0xf returned 0 after 0 usecs
[   40.800004] calling  nf_conntrack_l3proto_ipv4_init+0x0/0x11d @ 1
[   40.808039] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x11d returned 0 after 0 usecs
[   40.816004] calling  nf_defrag_init+0x0/0x14 @ 1
[   40.820004] initcall nf_defrag_init+0x0/0x14 returned 0 after 0 usecs
[   40.824003] calling  bictcp_register+0x0/0xf @ 1
[   40.828002] TCP bic registered
[   40.832004] initcall bictcp_register+0x0/0xf returned 0 after 3906 usecs
[   40.840003] calling  tcp_westwood_register+0x0/0xf @ 1
[   40.844002] TCP westwood registered
[   40.848004] initcall tcp_westwood_register+0x0/0xf returned 0 after 3906 usecs
[   40.856003] calling  hybla_register+0x0/0xf @ 1
[   40.860002] TCP hybla registered
[   40.864003] initcall hybla_register+0x0/0xf returned 0 after 3906 usecs
[   40.868002] calling  tcp_vegas_register+0x0/0x11 @ 1
[   40.876002] TCP vegas registered
[   40.879231] initcall tcp_vegas_register+0x0/0x11 returned 0 after 0 usecs
[   40.884003] calling  tcp_lp_register+0x0/0xf @ 1
[   40.888002] TCP lp registered
[   40.892004] initcall tcp_lp_register+0x0/0xf returned 0 after 3906 usecs
[   40.900003] calling  xfrm_user_init+0x0/0x40 @ 1
[   40.904002] Initializing XFRM netlink socket
[   40.908024] initcall xfrm_user_init+0x0/0x40 returned 0 after 3906 usecs
[   40.916003] calling  packet_init+0x0/0x39 @ 1
[   40.920003] NET: Registered protocol family 17
[   40.924009] initcall packet_init+0x0/0x39 returned 0 after 3906 usecs
[   40.928003] calling  ipsec_pfkey_init+0x0/0x6b @ 1
[   40.936009] NET: Registered protocol family 15
[   40.940003] initcall ipsec_pfkey_init+0x0/0x6b returned 0 after 3906 usecs
[   40.944002] calling  br_init+0x0/0xa1 @ 1
[   40.952042] initcall br_init+0x0/0xa1 returned 0 after 3906 usecs
[   40.956003] calling  dsa_init_module+0x0/0x11 @ 1
[   40.960003] initcall dsa_init_module+0x0/0x11 returned 0 after 0 usecs
[   40.968003] calling  edsa_init_module+0x0/0x11 @ 1
[   40.972003] initcall edsa_init_module+0x0/0x11 returned 0 after 0 usecs
[   40.980003] calling  trailer_init_module+0x0/0x11 @ 1
[   40.984003] initcall trailer_init_module+0x0/0x11 returned 0 after 0 usecs
[   40.992003] calling  mv88e6060_init+0x0/0x11 @ 1
[   40.996003] initcall mv88e6060_init+0x0/0x11 returned 0 after 0 usecs
[   41.000003] calling  mv88e6123_61_65_init+0x0/0x11 @ 1
[   41.008008] initcall mv88e6123_61_65_init+0x0/0x11 returned 0 after 0 usecs
[   41.012003] calling  mv88e6131_init+0x0/0x11 @ 1
[   41.020003] initcall mv88e6131_init+0x0/0x11 returned 0 after 0 usecs
[   41.024003] calling  dsa_init_module+0x0/0xf @ 1
[   41.028009] bus: 'platform': add driver dsa
[   41.032084] initcall dsa_init_module+0x0/0xf returned 0 after 3906 usecs
[   41.040003] calling  ipx_init+0x0/0xcd @ 1
[   41.044195] NET: Registered protocol family 4
[   41.056026] initcall ipx_init+0x0/0xcd returned 0 after 11718 usecs
[   41.060003] calling  x25_init+0x0/0x7d @ 1
[   41.064002] NET: Registered protocol family 9
[   41.068003] X.25 for Linux Version 0.2
[   41.072020] initcall x25_init+0x0/0x7d returned 0 after 7812 usecs
[   41.080003] calling  lapb_init+0x0/0x7 @ 1
[   41.084003] initcall lapb_init+0x0/0x7 returned 0 after 0 usecs
[   41.088003] calling  l2cap_init+0x0/0xfb @ 1
[   41.092058] Bluetooth: L2CAP ver 2.14
[   41.096004] Bluetooth: L2CAP socket layer initialized
[   41.100005] initcall l2cap_init+0x0/0xfb returned 0 after 7812 usecs
[   41.104003] calling  sco_init+0x0/0xd8 @ 1
[   41.108011] Bluetooth: SCO (Voice Link) ver 0.6
[   41.112002] Bluetooth: SCO socket layer initialized
[   41.116003] initcall sco_init+0x0/0xd8 returned 0 after 7812 usecs
[   41.120003] calling  rfcomm_init+0x0/0xca @ 1
[   41.124113] Bluetooth: RFCOMM TTY layer initialized
[   41.128008] Bluetooth: RFCOMM socket layer initialized
[   41.136002] Bluetooth: RFCOMM ver 1.11
[   41.140004] initcall rfcomm_init+0x0/0xca returned 0 after 15625 usecs
[   41.144003] calling  bnep_init+0x0/0x78 @ 1
[   41.148002] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   41.156002] Bluetooth: BNEP filters: multicast
[   41.160003] initcall bnep_init+0x0/0x78 returned 0 after 11718 usecs
[   41.164002] calling  hidp_init+0x0/0x4d @ 1
[   41.168002] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   41.176005] bus: 'hid': add driver generic-bluetooth
[   41.180074] initcall hidp_init+0x0/0x4d returned 0 after 11718 usecs
[   41.188003] calling  af_rxrpc_init+0x0/0x167 @ 1
[   41.192164] NET: Registered protocol family 33
[   41.196016] initcall af_rxrpc_init+0x0/0x167 returned 0 after 3906 usecs
[   41.204003] calling  atm_clip_init+0x0/0x9a @ 1
[   41.208192] initcall atm_clip_init+0x0/0x9a returned 0 after 0 usecs
[   41.212003] calling  lane_module_init+0x0/0x5a @ 1
[   41.220007] lec:lane_module_init: lec.c: Jun 11 2010 12:25:33 initialized
[   41.224003] initcall lane_module_init+0x0/0x5a returned 0 after 3906 usecs
[   41.232003] calling  atm_mpoa_init+0x0/0x3a @ 1
[   41.236007] mpoa:atm_mpoa_init: mpc.c: Jun 11 2010 12:25:29 initialized
[   41.244003] initcall atm_mpoa_init+0x0/0x3a returned 0 after 7812 usecs
[   41.252003] calling  l2tp_init+0x0/0x2c @ 1
[   41.256014] L2TP core driver, V2.0
[   41.259414] initcall l2tp_init+0x0/0x2c returned 0 after 0 usecs
[   41.264003] calling  l2tp_ip_init+0x0/0x56 @ 1
[   41.268001] L2TP IP encapsulation support (L2TPv3)
[   41.272164] initcall l2tp_ip_init+0x0/0x56 returned 0 after 3906 usecs
[   41.280005] calling  l2tp_nl_init+0x0/0x23 @ 1
[   41.284001] L2TP netlink interface
[   41.288048] initcall l2tp_nl_init+0x0/0x23 returned 0 after 3906 usecs
[   41.292003] calling  econet_proto_init+0x0/0x1a4 @ 1
[   41.300002] NET: Registered protocol family 19
[   41.304036] initcall econet_proto_init+0x0/0x1a4 returned 0 after 3906 usecs
[   41.312005] calling  phonet_init+0x0/0x70 @ 1
[   41.316021] NET: Registered protocol family 35
[   41.320157] initcall phonet_init+0x0/0x70 returned 0 after 3906 usecs
[   41.324003] calling  pep_register+0x0/0x14 @ 1
[   41.332155] initcall pep_register+0x0/0x14 returned 0 after 0 usecs
[   41.336003] calling  vlan_proto_init+0x0/0x9d @ 1
[   41.340002] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[   41.348002] All bugs added by David S. Miller <davem@redhat.com>
[   41.356018] initcall vlan_proto_init+0x0/0x9d returned 0 after 15625 usecs
[   41.360003] calling  dccp_init+0x0/0x304 @ 1
[   41.370716] CCID: Activated CCID 2 (TCP-like)
[   41.372312] CCID: Activated CCID 3 (TCP-Friendly Rate Control)
[   41.380007] initcall dccp_init+0x0/0x304 returned 0 after 15625 usecs
[   41.384003] calling  dccp_v4_init+0x0/0x72 @ 1
[   41.392485] initcall dccp_v4_init+0x0/0x72 returned 0 after 0 usecs
[   41.396008] calling  sctp_init+0x0/0x706 @ 1
[   41.404902] SCTP: Hash tables configured (established 43690 bind 52428)
[   41.408290] initcall sctp_init+0x0/0x706 returned 0 after 7812 usecs
[   41.416011] calling  rds_init+0x0/0xa6 @ 1
[   41.420186] rds_page_remainder_cpu_notify(): cpu 0 action 0x7
[   41.428004] rds_page_remainder_cpu_notify(): cpu 1 action 0x7
[   41.432004] initcall rds_init+0x0/0xa6 returned -12 after 11718 usecs
[   41.440003] initcall rds_init+0x0/0xa6 returned with error code -12 
[   41.444003] calling  rds_rdma_init+0x0/0xf7 @ 1
[   41.448031] rds_rdma_listen_init(): cm 7dc2a9e0 listening on port 18634
[   41.456031] rds_rdma_listen_stop(): cm 7dc2a9e0
[   41.460011] initcall rds_rdma_init+0x0/0xf7 returned -12 after 11718 usecs
[   41.468003] initcall rds_rdma_init+0x0/0xf7 returned with error code -12 
[   41.476003] calling  lib80211_init+0x0/0x19 @ 1
[   41.480002] lib80211: common routines for IEEE802.11 drivers
[   41.484003] lib80211_crypt: registered algorithm 'NULL'
[   41.488003] initcall lib80211_init+0x0/0x19 returned 0 after 7812 usecs
[   41.496003] calling  caif_device_init+0x0/0x6b @ 1
[   41.500027] initcall caif_device_init+0x0/0x6b returned 0 after 0 usecs
[   41.508012] calling  chnl_init_module+0x0/0xf @ 1
[   41.512004] initcall chnl_init_module+0x0/0xf returned 0 after 0 usecs
[   41.520005] calling  caif_sktinit_module+0x0/0x132 @ 1
[   41.524082] NET: Registered protocol family 37
[   41.528004] initcall caif_sktinit_module+0x0/0x132 returned 0 after 3906 usecs
[   41.536003] calling  dcbnl_init+0x0/0x2d @ 1
[   41.540004] initcall dcbnl_init+0x0/0x2d returned 0 after 0 usecs
[   41.548003] calling  af_ieee802154_init+0x0/0x63 @ 1
[   41.552305] NET: Registered protocol family 36
[   41.556009] initcall af_ieee802154_init+0x0/0x63 returned 0 after 3906 usecs
[   41.564003] calling  wimax_subsys_init+0x0/0x2be @ 1
[   41.568089] initcall wimax_subsys_init+0x0/0x2be returned 0 after 0 usecs
[   41.576005] calling  mcheck_debugfs_init+0x0/0x35 @ 1
[   41.580022] initcall mcheck_debugfs_init+0x0/0x35 returned 0 after 0 usecs
[   41.588004] calling  severities_debugfs_init+0x0/0x35 @ 1
[   41.592017] initcall severities_debugfs_init+0x0/0x35 returned 0 after 0 usecs
[   41.600004] calling  powernow_init+0x0/0xcf @ 1
[   41.604004] initcall powernow_init+0x0/0xcf returned -19 after 0 usecs
[   41.612003] calling  centrino_init+0x0/0x26 @ 1
[   41.616004] initcall centrino_init+0x0/0x26 returned -19 after 0 usecs
[   41.620003] calling  cpufreq_p4_init+0x0/0x4f @ 1
[   41.628005] initcall cpufreq_p4_init+0x0/0x4f returned -19 after 0 usecs
[   41.632003] calling  update_mp_table+0x0/0x542 @ 1
[   41.640004] initcall update_mp_table+0x0/0x542 returned 0 after 0 usecs
[   41.644004] calling  lapic_insert_resource+0x0/0x35 @ 1
[   41.648006] initcall lapic_insert_resource+0x0/0x35 returned 0 after 0 usecs
[   41.656004] calling  print_ipi_mode+0x0/0x26 @ 1
[   41.660002] Using IPI No-Shortcut mode
[   41.664003] initcall print_ipi_mode+0x0/0x26 returned 0 after 3906 usecs
[   41.672003] PPS event at 4294902714
[   41.676007] calling  init_lapic_nmi_sysfs+0x0/0x33 @ 1
[   41.680003] initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 0 usecs
[   41.688003] calling  io_apic_bug_finalize+0x0/0x1a @ 1
[   41.692003] initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 0 usecs
[   41.700004] calling  check_early_ioremap_leak+0x0/0x45 @ 1
[   41.704004] initcall check_early_ioremap_leak+0x0/0x45 returned 0 after 0 usecs
[   41.712003] calling  pat_memtype_list_init+0x0/0x2e @ 1
[   41.716015] initcall pat_memtype_list_init+0x0/0x2e returned 0 after 0 usecs
[   41.720003] calling  sched_init_debug+0x0/0x1f @ 1
[   41.724020] initcall sched_init_debug+0x0/0x1f returned 0 after 0 usecs
[   41.728005] calling  init_oops_id+0x0/0x3a @ 1
[   41.732008] initcall init_oops_id+0x0/0x3a returned 0 after 0 usecs
[   41.736004] calling  disable_boot_consoles+0x0/0x3a @ 1
[   41.740003] initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 usecs
[   41.744003] calling  pm_qos_power_init+0x0/0xae @ 1
[   41.748011] device: 'cpu_dma_latency': device_add
[   41.752214] PM: Adding info for No Bus:cpu_dma_latency
[   41.756065] device: 'network_latency': device_add
[   41.760080] PM: Adding info for No Bus:network_latency
[   41.764056] device: 'network_throughput': device_add
[   41.768076] PM: Adding info for No Bus:network_throughput
[   41.772055] initcall pm_qos_power_init+0x0/0xae returned 0 after 23437 usecs
[   41.776004] calling  software_resume+0x0/0x1da @ 1
[   41.780004] PM: Resume from disk failed.
[   41.784004] initcall software_resume+0x0/0x1da returned -2 after 3906 usecs
[   41.788003] initcall software_resume+0x0/0x1da returned with error code -2 
[   41.792004] calling  taskstats_init+0x0/0x7d @ 1
[   41.796046] registered taskstats version 1
[   41.800004] initcall taskstats_init+0x0/0x7d returned 0 after 3906 usecs
[   41.804003] calling  clear_boot_tracer+0x0/0x27 @ 1
[   41.808007] initcall clear_boot_tracer+0x0/0x27 returned 0 after 0 usecs
[   41.812004] calling  event_trace_self_tests_init+0x0/0x20d @ 1
[   41.816004] Running tests on trace events:
[   41.820003] Testing event kfree_skb: OK
[   41.840561] Testing event skb_copy_datagram_iovec: OK
[   41.860549] Testing event scsi_dispatch_cmd_start: OK
[   41.880561] Testing event scsi_dispatch_cmd_error: OK
[   41.900557] Testing event scsi_dispatch_cmd_done: OK
[   41.920543] Testing event scsi_dispatch_cmd_timeout: OK
[   41.940546] Testing event scsi_eh_wakeup: OK
[   41.960548] Testing event lock_kernel: OK
[   41.980563] Testing event unlock_kernel: OK
[   42.000559] Testing event block_rq_abort: OK
[   42.020543] Testing event block_rq_requeue: OK
[   42.040561] Testing event block_rq_complete: OK
[   42.060554] Testing event block_rq_insert: OK
[   42.080557] Testing event block_rq_issue: OK
[   42.100560] Testing event block_bio_bounce: OK
[   42.120558] Testing event block_bio_complete: OK
[   42.140553] Testing event block_bio_backmerge: OK
[   42.160548] Testing event block_bio_frontmerge: OK
[   42.180564] Testing event block_bio_queue: OK
[   42.200556] Testing event block_getrq: OK
[   42.220544] Testing event block_sleeprq: OK
[   42.240556] Testing event block_plug: OK
[   42.260555] Testing event block_unplug_timer: OK
[   42.280539] Testing event block_unplug_io: OK
[   42.300541] Testing event block_split: OK
[   42.320557] Testing event block_remap: OK
[   42.340560] Testing event block_rq_remap: OK
[   42.360563] Testing event gfs2_glock_state_change: OK
[   42.380556] Testing event gfs2_glock_put: OK
[   42.400556] Testing event gfs2_demote_rq: OK
[   42.420560] Testing event gfs2_promote: OK
[   42.440545] Testing event gfs2_glock_queue: OK
[   42.460545] Testing event gfs2_pin: OK
[   42.480547] Testing event gfs2_log_flush: OK
[   42.500540] Testing event gfs2_log_blocks: OK
[   42.520563] Testing event gfs2_bmap: OK
[   42.540558] Testing event gfs2_block_alloc: OK
[   42.560562] Testing event xfs_attr_list_sf: OK
[   42.580557] Testing event xfs_attr_list_sf_all: OK
[   42.600541] Testing event xfs_attr_list_leaf: OK
[   42.620565] Testing event xfs_attr_list_leaf_end: OK
[   42.640559] Testing event xfs_attr_list_full: OK
[   42.660546] Testing event xfs_attr_list_add: 
[   42.676002] PPS event at 4294902965
[   42.680195] OK
[   42.681858] Testing event xfs_attr_list_wrong_blk: OK
[   42.700558] Testing event xfs_attr_list_notfound: OK
[   42.720555] Testing event xfs_perag_get: OK
[   42.740561] Testing event xfs_perag_put: OK
[   42.760561] Testing event xfs_attr_list_node_descend: OK
[   42.780555] Testing event xfs_iext_insert: OK
[   42.800549] Testing event xfs_iext_remove: OK
[   42.820556] Testing event xfs_bmap_pre_update: OK
[   42.840558] Testing event xfs_bmap_post_update: OK
[   42.860543] Testing event xfs_extlist: OK
[   42.880559] Testing event xfs_buf_init: OK
[   42.900556] Testing event xfs_buf_free: OK
[   42.920549] Testing event xfs_buf_hold: OK
[   42.940557] Testing event xfs_buf_rele: OK
[   42.960558] Testing event xfs_buf_pin: OK
[   42.980545] Testing event xfs_buf_unpin: OK
[   43.000561] Testing event xfs_buf_iodone: OK
[   43.020556] Testing event xfs_buf_iorequest: OK
[   43.040543] Testing event xfs_buf_bawrite: OK
[   43.060560] Testing event xfs_buf_bdwrite: OK
[   43.080561] Testing event xfs_buf_lock: OK
[   43.100548] Testing event xfs_buf_lock_done: OK
[   43.120561] Testing event xfs_buf_cond_lock: OK
[   43.140559] Testing event xfs_buf_unlock: OK
[   43.160545] Testing event xfs_buf_ordered_retry: OK
[   43.180561] Testing event xfs_buf_iowait: OK
[   43.200563] Testing event xfs_buf_iowait_done: OK
[   43.220564] Testing event xfs_buf_delwri_queue: OK
[   43.240559] Testing event xfs_buf_delwri_dequeue: OK
[   43.260559] Testing event xfs_buf_delwri_split: OK
[   43.280553] Testing event xfs_buf_get_noaddr: OK
[   43.300563] Testing event xfs_bdstrat_shut: OK
[   43.320556] Testing event xfs_buf_item_relse: OK
[   43.340543] Testing event xfs_buf_item_iodone: OK
[   43.360558] Testing event xfs_buf_item_iodone_async: OK
[   43.380559] Testing event xfs_buf_error_relse: OK
[   43.400546] Testing event xfs_trans_read_buf_io: OK
[   43.420560] Testing event xfs_trans_read_buf_shut: OK
[   43.440558] Testing event xfs_btree_corrupt: OK
[   43.460543] Testing event xfs_da_btree_corrupt: OK
[   43.480560] Testing event xfs_reset_dqcounts: OK
[   43.500561] Testing event xfs_inode_item_push: OK
[   43.520548] Testing event xfs_buf_find: OK
[   43.540541] Testing event xfs_buf_get: OK
[   43.560543] Testing event xfs_buf_read: OK
[   43.580557] Testing event xfs_buf_ioerror: OK
[   43.600555] Testing event xfs_buf_item_size: OK
[   43.620547] Testing event xfs_buf_item_size_stale: OK
[   43.640557] Testing event xfs_buf_item_format: OK
[   43.660557] Testing event xfs_buf_item_format_stale: 
[   43.676001] PPS event at 4294903215
[   43.680193] OK
[   43.681856] Testing event xfs_buf_item_pin: OK
[   43.700553] Testing event xfs_buf_item_unpin: OK
[   43.720548] Testing event xfs_buf_item_unpin_stale: OK
[   43.740540] Testing event xfs_buf_item_trylock: OK
[   43.760565] Testing event xfs_buf_item_unlock: OK
[   43.780559] Testing event xfs_buf_item_unlock_stale: OK
[   43.800544] Testing event xfs_buf_item_committed: OK
[   43.820547] Testing event xfs_buf_item_push: OK
[   43.840562] Testing event xfs_buf_item_pushbuf: OK
[   43.860559] Testing event xfs_trans_get_buf: OK
[   43.880543] Testing event xfs_trans_get_buf_recur: OK
[   43.900545] Testing event xfs_trans_getsb: OK
[   43.920545] Testing event xfs_trans_getsb_recur: OK
[   43.940563] Testing event xfs_trans_read_buf: OK
[   43.960557] Testing event xfs_trans_read_buf_recur: OK
[   43.980543] Testing event xfs_trans_log_buf: OK
[   44.000558] Testing event xfs_trans_brelse: OK
[   44.020554] Testing event xfs_trans_bjoin: OK
[   44.040548] Testing event xfs_trans_bhold: OK
[   44.060557] Testing event xfs_trans_bhold_release: OK
[   44.080556] Testing event xfs_trans_binval: OK
[   44.100543] Testing event xfs_ilock: OK
[   44.120547] Testing event xfs_ilock_nowait: OK
[   44.140560] Testing event xfs_ilock_demote: OK
[   44.160558] Testing event xfs_iunlock: OK
[   44.180543] Testing event xfs_iget_skip: OK
[   44.200558] Testing event xfs_iget_reclaim: OK
[   44.220560] Testing event xfs_iget_found: OK
[   44.240538] Testing event xfs_iget_alloc: OK
[   44.260562] Testing event xfs_ihold: OK
[   44.280557] Testing event xfs_irele: OK
[   44.300543] Testing event xfs_inode_pin: OK
[   44.320557] Testing event xfs_inode_unpin: OK
[   44.340555] Testing event xfs_inode_unpin_nowait: OK
[   44.360540] Testing event xfs_inode: OK
[   44.380541] Testing event xfs_dqadjust: OK
[   44.400556] Testing event xfs_dqreclaim_want: OK
[   44.420560] Testing event xfs_dqreclaim_dirty: OK
[   44.440546] Testing event xfs_dqreclaim_unlink: OK
[   44.460560] Testing event xfs_dqattach_found: OK
[   44.480558] Testing event xfs_dqattach_get: OK
[   44.500543] Testing event xfs_dqinit: OK
[   44.520544] Testing event xfs_dqreuse: OK
[   44.540545] Testing event xfs_dqalloc: OK
[   44.560562] Testing event xfs_dqtobp_read: OK
[   44.580555] Testing event xfs_dqread: OK
[   44.600541] Testing event xfs_dqread_fail: OK
[   44.620557] Testing event xfs_dqlookup_found: OK
[   44.640555] Testing event xfs_dqlookup_want: OK
[   44.660548] Testing event xfs_dqlookup_freelist: 
[   44.676001] PPS event at 4294903465
[   44.680180] OK
[   44.681848] Testing event xfs_dqlookup_done: OK
[   44.700541] Testing event xfs_dqget_hit: OK
[   44.720543] Testing event xfs_dqget_miss: OK
[   44.740560] Testing event xfs_dqput: OK
[   44.760554] Testing event xfs_dqput_wait: OK
[   44.780539] Testing event xfs_dqput_free: OK
[   44.800541] Testing event xfs_dqrele: OK
[   44.820564] Testing event xfs_dqflush: OK
[   44.840555] Testing event xfs_dqflush_force: OK
[   44.860547] Testing event xfs_dqflush_done: OK
[   44.880564] Testing event xfs_dquot_dqalloc: OK
[   44.900556] Testing event xfs_dquot_dqdetach: OK
[   44.920544] Testing event xfs_log_done_nonperm: OK
[   44.940545] Testing event xfs_log_done_perm: OK
[   44.960547] Testing event xfs_log_reserve: OK
[   44.980540] Testing event xfs_log_umount_write: OK
[   45.000541] Testing event xfs_log_grant_enter: OK
[   45.020544] Testing event xfs_log_grant_exit: OK
[   45.040546] Testing event xfs_log_grant_error: OK
[   45.060546] Testing event xfs_log_grant_sleep1: OK
[   45.080540] Testing event xfs_log_grant_wake1: OK
[   45.100541] Testing event xfs_log_grant_sleep2: OK
[   45.120564] Testing event xfs_log_grant_wake2: OK
[   45.140561] Testing event xfs_log_regrant_write_enter: OK
[   45.160546] Testing event xfs_log_regrant_write_exit: OK
[   45.180549] Testing event xfs_log_regrant_write_error: OK
[   45.200563] Testing event xfs_log_regrant_write_sleep1: OK
[   45.220557] Testing event xfs_log_regrant_write_wake1: OK
[   45.240544] Testing event xfs_log_regrant_write_sleep2: OK
[   45.260546] Testing event xfs_log_regrant_write_wake2: OK
[   45.280547] Testing event xfs_log_regrant_reserve_enter: OK
[   45.300561] Testing event xfs_log_regrant_reserve_exit: OK
[   45.320558] Testing event xfs_log_regrant_reserve_sub: OK
[   45.340543] Testing event xfs_log_ungrant_enter: OK
[   45.360545] Testing event xfs_log_ungrant_exit: OK
[   45.380546] Testing event xfs_log_ungrant_sub: OK
[   45.400563] Testing event xfs_file_read: OK
[   45.420556] Testing event xfs_file_buffered_write: OK
[   45.440543] Testing event xfs_file_direct_write: OK
[   45.460566] Testing event xfs_file_splice_read: OK
[   45.480556] Testing event xfs_file_splice_write: OK
[   45.500548] Testing event xfs_writepage: OK
[   45.520564] Testing event xfs_releasepage: OK
[   45.540556] Testing event xfs_invalidatepage: OK
[   45.560560] Testing event xfs_iomap_enter: OK
[   45.580554] Testing event xfs_iomap_found: OK
[   45.600548] Testing event xfs_iomap_alloc: OK
[   45.620540] Testing event xfs_delalloc_enospc: OK
[   45.640540] Testing event xfs_unwritten_convert: OK
[   45.660557] Testing event xfs_itruncate_start: 
[   45.676002] PPS event at 4294903715
[   45.680189] OK
[   45.681859] Testing event xfs_itruncate_finish_start: OK
[   45.700549] Testing event xfs_itruncate_finish_end: OK
[   45.720550] Testing event xfs_pagecache_inval: OK
[   45.740542] Testing event xfs_bunmap: OK
[   45.760558] Testing event xfs_alloc_busy: OK
[   45.780554] Testing event xfs_alloc_unbusy: OK
[   45.800548] Testing event xfs_alloc_busysearch: OK
[   45.820564] Testing event xfs_trans_commit_lsn: OK
[   45.840557] Testing event xfs_agf: OK
[   45.860543] Testing event xfs_free_extent: OK
[   45.880545] Testing event xfs_alloc_exact_done: OK
[   45.900560] Testing event xfs_alloc_exact_error: OK
[   45.920558] Testing event xfs_alloc_near_nominleft: OK
[   45.940541] Testing event xfs_alloc_near_first: OK
[   45.960558] Testing event xfs_alloc_near_greater: OK
[   45.980561] Testing event xfs_alloc_near_lesser: OK
[   46.000547] Testing event xfs_alloc_near_error: OK
[   46.020560] Testing event xfs_alloc_size_neither: OK
[   46.040558] Testing event xfs_alloc_size_noentry: OK
[   46.060542] Testing event xfs_alloc_size_nominleft: OK
[   46.080559] Testing event xfs_alloc_size_done: OK
[   46.100561] Testing event xfs_alloc_size_error: OK
[   46.120548] Testing event xfs_alloc_small_freelist: OK
[   46.140542] Testing event xfs_alloc_small_notenough: OK
[   46.160542] Testing event xfs_alloc_small_done: OK
[   46.180545] Testing event xfs_alloc_small_error: OK
[   46.200545] Testing event xfs_alloc_vextent_badargs: OK
[   46.220540] Testing event xfs_alloc_vextent_nofix: OK
[   46.240541] Testing event xfs_alloc_vextent_noagbp: OK
[   46.260543] Testing event xfs_alloc_vextent_loopfailed: OK
[   46.280544] Testing event xfs_alloc_vextent_allfailed: OK
[   46.300547] Testing event xfs_dir2_sf_addname: OK
[   46.320547] Testing event xfs_dir2_sf_create: OK
[   46.340540] Testing event xfs_dir2_sf_lookup: OK
[   46.360565] Testing event xfs_dir2_sf_replace: OK
[   46.380560] Testing event xfs_dir2_sf_removename: OK
[   46.400545] Testing event xfs_dir2_sf_toino4: OK
[   46.420546] Testing event xfs_dir2_sf_toino8: OK
[   46.440561] Testing event xfs_dir2_sf_to_block: OK
[   46.460556] Testing event xfs_dir2_block_addname: OK
[   46.480543] Testing event xfs_dir2_block_lookup: OK
[   46.500546] Testing event xfs_dir2_block_replace: OK
[   46.520546] Testing event xfs_dir2_block_removename: OK
[   46.540539] Testing event xfs_dir2_block_to_sf: OK
[   46.560541] Testing event xfs_dir2_block_to_leaf: OK
[   46.580543] Testing event xfs_dir2_leaf_addname: OK
[   46.600545] Testing event xfs_dir2_leaf_lookup: OK
[   46.620546] Testing event xfs_dir2_leaf_replace: OK
[   46.640547] Testing event xfs_dir2_leaf_removename: OK
[   46.660540] Testing event xfs_dir2_leaf_to_block: 
[   46.676001] PPS event at 4294903965
[   46.680193] OK
[   46.681863] Testing event xfs_dir2_leaf_to_node: OK
[   46.700561] Testing event xfs_dir2_node_addname: OK
[   46.720546] Testing event xfs_dir2_node_lookup: OK
[   46.740548] Testing event xfs_dir2_node_replace: OK
[   46.760563] Testing event xfs_dir2_node_removename: OK
[   46.780556] Testing event xfs_dir2_node_to_leaf: OK
[   46.800544] Testing event xfs_dir2_leafn_add: OK
[   46.820557] Testing event xfs_dir2_leafn_remove: OK
[   46.840555] Testing event xfs_dir2_grow_inode: OK
[   46.860549] Testing event xfs_dir2_shrink_inode: OK
[   46.880557] Testing event xfs_dir2_leafn_moveents: OK
[   46.900558] Testing event xfs_swap_extent_before: OK
[   46.920545] Testing event xfs_swap_extent_after: OK
[   46.940546] Testing event xfs_log_recover_item_add: OK
[   46.960540] Testing event xfs_log_recover_item_add_cont: OK
[   46.980542] Testing event xfs_log_recover_item_reorder_head: OK
[   47.000556] Testing event xfs_log_recover_item_reorder_tail: OK
[   47.020553] Testing event xfs_log_recover_item_recover: OK
[   47.040548] Testing event xfs_log_recover_buf_not_cancel: OK
[   47.060548] Testing event xfs_log_recover_buf_cancel: OK
[   47.080540] Testing event xfs_log_recover_buf_cancel_add: OK
[   47.100542] Testing event xfs_log_recover_buf_cancel_ref_inc: OK
[   47.120559] Testing event xfs_log_recover_buf_recover: OK
[   47.140552] Testing event xfs_log_recover_buf_inode_buf: OK
[   47.160548] Testing event xfs_log_recover_buf_reg_buf: OK
[   47.180542] Testing event xfs_log_recover_buf_dquot_buf: OK
[   47.200565] Testing event xfs_log_recover_inode_recover: OK
[   47.220554] Testing event xfs_log_recover_inode_cancel: OK
[   47.240547] Testing event xfs_log_recover_inode_skip: OK
[   47.260548] Testing event jbd2_checkpoint: OK
[   47.280562] Testing event jbd2_start_commit: OK
[   47.300556] Testing event jbd2_commit_locking: OK
[   47.320543] Testing event jbd2_commit_flushing: OK
[   47.340546] Testing event jbd2_commit_logging: OK
[   47.360548] Testing event jbd2_end_commit: OK
[   47.380540] Testing event jbd2_submit_inode_data: OK
[   47.400541] Testing event jbd2_run_stats: OK
[   47.420544] Testing event jbd2_checkpoint_stats: OK
[   47.440545] Testing event jbd2_cleanup_journal_tail: OK
[   47.460548] Testing event ext4_free_inode: OK
[   47.480540] Testing event ext4_request_inode: OK
[   47.500563] Testing event ext4_allocate_inode: OK
[   47.520559] Testing event ext4_write_begin: OK
[   47.540546] Testing event ext4_da_write_begin: OK
[   47.560548] Testing event ext4_ordered_write_end: OK
[   47.580547] Testing event ext4_writeback_write_end: OK
[   47.600540] Testing event ext4_journalled_write_end: OK
[   47.620542] Testing event ext4_da_write_end: OK
[   47.640559] Testing event ext4_writepage: OK
[   47.660561] Testing event ext4_da_writepages: 
[   47.676001] PPS event at 4294904215
[   47.680178] OK
[   47.681846] Testing event ext4_da_write_pages: OK
[   47.700541] Testing event ext4_da_writepages_result: OK
[   47.720543] Testing event ext4_discard_blocks: OK
[   47.740545] Testing event ext4_mb_new_inode_pa: OK
[   47.760560] Testing event ext4_mb_new_group_pa: OK
[   47.780555] Testing event ext4_mb_release_inode_pa: OK
[   47.800541] Testing event ext4_mb_release_group_pa: OK
[   47.820556] Testing event ext4_discard_preallocations: OK
[   47.840559] Testing event ext4_mb_discard_preallocations: OK
[   47.860544] Testing event ext4_request_blocks: OK
[   47.880547] Testing event ext4_allocate_blocks: OK
[   47.900541] Testing event ext4_free_blocks: OK
[   47.920543] Testing event ext4_sync_file: OK
[   47.940543] Testing event ext4_sync_fs: OK
[   47.960560] Testing event ext4_alloc_da_blocks: OK
[   47.980554] Testing event ext4_mballoc_alloc: OK
[   48.000541] Testing event ext4_mballoc_prealloc: OK
[   48.020541] Testing event ext4_mballoc_discard: OK
[   48.040541] Testing event ext4_mballoc_free: OK
[   48.060544] Testing event ext4_forget: OK
[   48.080546] Testing event ext4_da_update_reserve_space: OK
[   48.100563] Testing event ext4_da_reserve_space: OK
[   48.120557] Testing event ext4_da_release_space: OK
[   48.140542] Testing event ext4_mb_bitmap_load: OK
[   48.160557] Testing event ext4_mb_buddy_bitmap_load: OK
[   48.180572] Testing event kmalloc: OK
[   48.200540] Testing event kmem_cache_alloc: OK
[   48.220541] Testing event kmalloc_node: OK
[   48.240555] Testing event kmem_cache_alloc_node: OK
[   48.260560] Testing event kfree: OK
[   48.280545] Testing event kmem_cache_free: OK
[   48.300559] Testing event mm_page_free_direct: OK
[   48.320556] Testing event mm_pagevec_free: OK
[   48.340543] Testing event mm_page_alloc: OK
[   48.360544] Testing event mm_page_alloc_zone_locked: OK
[   48.380559] Testing event mm_page_pcpu_drain: OK
[   48.400554] Testing event mm_page_alloc_extfrag: OK
[   48.420541] Testing event power_start: OK
[   48.440563] Testing event power_frequency: OK
[   48.460551] Testing event power_end: OK
[   48.480553] Testing event workqueue_insertion: OK
[   48.500539] Testing event workqueue_execution: OK
[   48.520563] Testing event workqueue_creation: OK
[   48.540556] Testing event workqueue_destruction: OK
[   48.560563] Testing event signal_generate: OK
[   48.580561] Testing event signal_deliver: OK
[   48.600561] Testing event signal_overflow_fail: OK
[   48.620556] Testing event signal_lose_info: OK
[   48.640543] Testing event timer_init: OK
[   48.660543] Testing event timer_start: 
[   48.676001] PPS event at 4294904465
[   48.680193] OK
[   48.681858] Testing event timer_expire_entry: OK
[   48.700551] Testing event timer_expire_exit: OK
[   48.720560] Testing event timer_cancel: OK
[   48.740557] Testing event hrtimer_init: OK
[   48.760559] Testing event hrtimer_start: OK
[   48.780554] Testing event hrtimer_expire_entry: OK
[   48.800546] Testing event hrtimer_expire_exit: OK
[   48.820562] Testing event hrtimer_cancel: OK
[   48.840556] Testing event itimer_state: OK
[   48.860541] Testing event itimer_expire: OK
[   48.880558] Testing event irq_handler_entry: OK
[   48.900554] Testing event irq_handler_exit: OK
[   48.920546] Testing event softirq_entry: OK
[   48.940539] Testing event softirq_exit: OK
[   48.960566] Testing event sched_kthread_stop: OK
[   48.980559] Testing event sched_kthread_stop_ret: OK
[   49.000560] Testing event sched_wait_task: OK
[   49.020556] Testing event sched_wakeup: OK
[   49.040539] Testing event sched_wakeup_new: OK
[   49.060556] Testing event sched_switch: OK
[   49.080557] Testing event sched_migrate_task: OK
[   49.100559] Testing event sched_process_free: OK
[   49.120554] Testing event sched_process_exit: OK
[   49.140539] Testing event sched_process_wait: OK
[   49.160556] Testing event sched_process_fork: OK
[   49.180557] Testing event sched_stat_wait: OK
[   49.200559] Testing event sched_stat_sleep: OK
[   49.220554] Testing event sched_stat_iowait: OK
[   49.240539] Testing event sched_stat_runtime: OK
[   49.260556] Testing event mce_record: OK
[   49.280558] Testing event sys_enter: OK
[   49.300561] Testing event sys_exit: OK
[   49.320554] Running tests on trace event systems:
[   49.324003] Testing event system skb: OK
[   49.344660] Testing event system scsi: OK
[   49.364793] Testing event system bkl: OK
[   49.384642] Testing event system block: OK
[   49.405423] Testing event system gfs2: OK
[   49.425026] Testing event system xfs: OK
[   49.484002] Testing event system jbd2: OK
[   49.505031] Testing event system ext4: OK
[   49.526411] Testing event system kmem: OK
[   49.545121] Testing event system power: OK
[   49.564722] Testing event system workqueue: OK
[   49.584740] Testing event system signal: OK
[   49.604738] Testing event system timer: OK
[   49.625119] Testing event system irq: OK
[   49.644739] Testing event system sched: OK
[   49.665269] Testing event system syscalls: 
[   49.676032] PPS event at 4294904715
[   49.684511] OK
[   49.686174] Testing event system mce: OK
[   49.704607] Testing event system raw_syscalls: OK
[   49.724661] Running tests on all trace events:
[   49.728002] Testing all events: OK
[   49.816756] initcall event_trace_self_tests_init+0x0/0x20d returned 0 after 7812500 usecs
[   49.824006] calling  fail_page_alloc_debugfs+0x0/0xc1 @ 1
[   49.828105] initcall fail_page_alloc_debugfs+0x0/0xc1 returned 0 after 0 usecs
[   49.836003] calling  max_swapfiles_check+0x0/0x7 @ 1
[   49.840003] initcall max_swapfiles_check+0x0/0x7 returned 0 after 0 usecs
[   49.848003] calling  failslab_debugfs_init+0x0/0x8c @ 1
[   49.852098] initcall failslab_debugfs_init+0x0/0x8c returned 0 after 0 usecs
[   49.860238] calling  init_ima+0x0/0x14 @ 1
[   49.864060] IMA: No TPM chip found, activating TPM-bypass!
[   49.868046] initcall init_ima+0x0/0x14 returned 0 after 3906 usecs
[   49.876009] calling  fail_make_request_debugfs+0x0/0x14 @ 1
[   49.880081] initcall fail_make_request_debugfs+0x0/0x14 returned 0 after 0 usecs
[   49.888003] calling  fail_io_timeout_debugfs+0x0/0x14 @ 1
[   49.896071] initcall fail_io_timeout_debugfs+0x0/0x14 returned 0 after 0 usecs
[   49.900005] calling  random32_reseed+0x0/0x9d @ 1
[   49.908018] initcall random32_reseed+0x0/0x9d returned 0 after 0 usecs
[   49.912003] calling  pci_resource_alignment_sysfs_init+0x0/0x14 @ 1
[   49.920015] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 0 usecs
[   49.928003] calling  pci_sysfs_init+0x0/0x44 @ 1
[   49.932725] initcall pci_sysfs_init+0x0/0x44 returned 0 after 0 usecs
[   49.940004] calling  regulator_init_complete+0x0/0xf6 @ 1
[   49.944004] initcall regulator_init_complete+0x0/0xf6 returned 0 after 0 usecs
[   49.952003] calling  seqgen_init+0x0/0xe @ 1
[   49.956020] initcall seqgen_init+0x0/0xe returned 0 after 0 usecs
[   49.964006] calling  late_resume_init+0x0/0x10d @ 1
[   49.968002]   Magic number: 14:428:449
[   49.972448] initcall late_resume_init+0x0/0x10d returned 0 after 3906 usecs
[   49.980005] calling  hd_init+0x0/0x28c @ 1
[   49.984065] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[   49.992036] initcall hd_init+0x0/0x28c returned -1 after 7812 usecs
[   49.996003] initcall hd_init+0x0/0x28c returned with error code -1 
[   50.004004] calling  scsi_complete_async_scans+0x0/0x123 @ 1
[   50.008003] initcall scsi_complete_async_scans+0x0/0x123 returned 0 after 0 usecs
[   50.016003] calling  rtc_hctosys+0x0/0x13e @ 1
[   50.020019] rtc-test rtc-test.0: setting system clock to 2010-06-11 21:25:29 UTC (1276291529)
[   50.028010] initcall rtc_hctosys+0x0/0x13e returned 0 after 7812 usecs
[   50.036003] calling  edd_init+0x0/0x2d5 @ 1
[   50.040003] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[   50.044096] initcall edd_init+0x0/0x2d5 returned 0 after 3906 usecs
[   50.052005] calling  tcp_congestion_default+0x0/0xf @ 1
[   50.056005] initcall tcp_congestion_default+0x0/0xf returned 0 after 0 usecs
[   50.064004] calling  ip_auto_config+0x0/0xd2b @ 1
[   50.068015] initcall ip_auto_config+0x0/0xd2b returned 0 after 0 usecs
[   50.076003] calling  initialize_hashrnd+0x0/0x16 @ 1
[   50.080008] initcall initialize_hashrnd+0x0/0x16 returned 0 after 0 usecs
[   50.088231] async_waiting @ 1
[   50.092003] async_continuing @ 1 after 0 usec
[   50.096076] md: Waiting for all devices to be available before autodetect
[   50.100002] md: If you don't use raid, use raid=noautodetect
[   50.108002] async_waiting @ 1
[   50.112002] async_continuing @ 1 after 0 usec
[   50.116070] device: 'md0': device_add
[   50.120064] PM: Adding info for No Bus:md0
[   50.124140] device: '9:0': device_add
[   50.128024] PM: Adding info for No Bus:9:0
[   50.132129] md: Autodetecting RAID arrays.
[   50.136003] md: Scanned 0 and added 0 devices.
[   50.140001] md: autorun ...
[   50.142814] md: ... autorun DONE.
[   50.160050] EXT3-fs (sda1): recovery required on readonly filesystem
[   50.164197] EXT3-fs (sda1): write access will be enabled during recovery
[   50.176074] EXT3-fs: barriers not enabled
[   50.208072] kjournald starting.  Commit interval 5 seconds
[   50.208072] EXT3-fs (sda1): recovery complete
[   50.216034] EXT3-fs (sda1): mounted filesystem with writeback data mode
[   50.224272] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[   50.228085] async_waiting @ 1
[   50.232002] async_continuing @ 1 after 0 usec
[   50.236002] debug: unmapping init memory 422d1000..42375000
[   50.280105] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
[   50.676005] PPS event at 4294904965
[   51.676006] PPS event at 4294905215
[   52.676005] PPS event at 4294905465
[   53.276311] md: Autodetecting RAID arrays.
[   53.280003] md: Scanned 0 and added 0 devices.
[   53.288004] md: autorun ...
[   53.290832] md: ... autorun DONE.
[   53.676005] PPS event at 4294905715
[   54.084345] device: 'md1': device_add
[   54.088083] PM: Adding info for No Bus:md1
[   54.092138] device: '9:1': device_add
[   54.096038] PM: Adding info for No Bus:9:1
[   54.572083] EXT3-fs (sda1): using internal journal
[   54.652111] EXT3-fs: barriers not enabled
[   54.656055] kjournald starting.  Commit interval 5 seconds
[   54.660011] EXT3-fs (sda5): using internal journal
[   54.666132] EXT3-fs (sda5): mounted filesystem with writeback data mode
[   54.676004] PPS event at 4294905965
[   55.680006] PPS event at 4294906216
[   55.788980] rc.sysinit used greatest stack depth: 1732 bytes left
[   56.680005] PPS event at 4294906466
[   57.680001] PPS event at 4294906716
[   58.680011] PPS event at 4294906966
[   59.448967] Adding 3911820k swap on /dev/sda2.  Priority:-1 extents:1 across:3911820k 
[   59.680055] PPS event at 4294907216
[   60.680008] PPS event at 4294907466
[   60.785517] ssh used greatest stack depth: 1716 bytes left
[   61.121417] device: 'vcs3': device_add
[   61.121629] PM: Adding info for No Bus:vcs3
[   61.121695] device: 'vcsa3': device_add
[   61.129414] PM: Adding info for No Bus:vcsa3
[   61.145736] device: 'vcs4': device_add
[   61.145965] PM: Adding info for No Bus:vcs4
[   61.146029] device: 'vcsa4': device_add
[   61.146101] PM: Adding info for No Bus:vcsa4
[   61.148085] device: 'vcs10': device_add
[   61.148174] PM: Adding info for No Bus:vcs10
[   61.148227] device: 'vcsa10': device_add
[   61.148298] PM: Adding info for No Bus:vcsa10
[   61.152050] device: 'vcs8': device_add
[   61.152128] PM: Adding info for No Bus:vcs8
[   61.152180] device: 'vcsa8': device_add
[   61.152251] PM: Adding info for No Bus:vcsa8
[   61.160734] device: 'vcs7': device_add
[   61.160961] PM: Adding info for No Bus:vcs7
[   61.161025] device: 'vcsa7': device_add
[   61.161102] PM: Adding info for No Bus:vcsa7
[   61.176097] device: 'vcs9': device_add
[   61.176268] PM: Adding info for No Bus:vcs9
[   61.176333] device: 'vcsa9': device_add
[   61.176418] PM: Adding info for No Bus:vcsa9
[   61.180006] device: 'vcs6': device_add
[   61.180006] PM: Adding info for No Bus:vcs6
[   61.180006] device: 'vcsa6': device_add
[   61.180006] PM: Adding info for No Bus:vcsa6
[   61.196042] device: 'vcs5': device_add
[   61.196119] PM: Adding info for No Bus:vcs5
[   61.196171] device: 'vcsa5': device_add
[   61.196243] PM: Adding info for No Bus:vcsa5
[   61.215235] device: 'vcs2': device_add
[   61.215364] PM: Adding info for No Bus:vcs2
[   61.215433] device: 'vcsa2': device_add
[   61.215512] PM: Adding info for No Bus:vcsa2
[   61.680004] PPS event at 4294907716
[   62.680006] PPS event at 4294907966
[   63.680005] PPS event at 4294908216
[   64.680006] PPS event at 4294908466
[   65.680002] PPS event at 4294908716
[   66.680006] PPS event at 4294908966
[   67.680006] PPS event at 4294909216
[   68.680006] PPS event at 4294909466
[   69.680002] PPS event at 4294909716
[   70.680001] PPS event at 4294909966
[   71.680006] PPS event at 4294910216
[   72.680002] PPS event at 4294910466
[   73.680002] PPS event at 4294910716
[   74.680004] PPS event at 4294910966
[   75.680002] PPS event at 4294911216
[   76.680005] PPS event at 4294911466
[   77.680006] PPS event at 4294911716
[   78.680002] PPS event at 4294911966
[   79.680002] PPS event at 4294912216
[   80.680001] PPS event at 4294912466
[   81.680006] PPS event at 4294912716
[   82.680006] PPS event at 4294912966
[   83.680002] PPS event at 4294913216
[   84.680004] PPS event at 4294913466
[   85.680002] PPS event at 4294913716
[   86.680002] PPS event at 4294913966
[   87.680002] PPS event at 4294914216
[   88.680001] PPS event at 4294914466
[   89.680006] PPS event at 4294914716
[   90.680006] PPS event at 4294914966
[   91.680002] PPS event at 4294915216
[   92.680004] PPS event at 4294915466
[   93.680002] PPS event at 4294915716
[   94.680001] PPS event at 4294915966
[   95.680002] PPS event at 4294916216
[   96.680002] PPS event at 4294916466
[   97.680006] PPS event at 4294916716
[   98.680011] PPS event at 4294916966
[   99.680004] PPS event at 4294917216
[  100.680002] PPS event at 4294917466
[  101.680002] PPS event at 4294917716
[  102.680005] PPS event at 4294917966
[  103.680001] PPS event at 4294918216
[  104.680001] PPS event at 4294918466
[  105.680001] PPS event at 4294918716
[  106.680006] PPS event at 4294918966
[  107.680006] PPS event at 4294919216
[  108.680001] PPS event at 4294919466
[  109.680006] PPS event at 4294919716
[  110.680001] PPS event at 4294919966
[  111.680001] PPS event at 4294920216
[  112.680003] PPS event at 4294920466
[  113.680001] PPS event at 4294920716
[  114.680001] PPS event at 4294920966
[  115.680001] PPS event at 4294921216
[  116.680006] PPS event at 4294921466
[  117.680006] PPS event at 4294921716
[  118.680001] PPS event at 4294921966
[  119.680002] PPS event at 4294922216
[  120.680004] PPS event at 4294922466
[  121.680002] PPS event at 4294922716
[  122.680001] PPS event at 4294922966
[  123.680006] PPS event at 4294923216
[  124.680001] PPS event at 4294923466
[  125.680001] PPS event at 4294923716
[  126.680008] PPS event at 4294923966
[  127.680011] PPS event at 4294924216
[  128.680006] PPS event at 4294924466
[  129.680001] PPS event at 4294924716
[  130.680001] PPS event at 4294924966
[  131.680001] PPS event at 4294925216
[  132.680005] PPS event at 4294925466
[  133.680001] PPS event at 4294925716
[  134.680001] PPS event at 4294925966
[  135.680003] PPS event at 4294926216

[-- Attachment #4: Type: text/plain, Size: 0 bytes --]



^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-11  8:32       ` Ingo Molnar
  (?)
@ 2010-06-11  8:40       ` Jens Axboe
  2010-06-11  8:55         ` Ingo Molnar
                           ` (2 more replies)
  -1 siblings, 3 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-11  8:40 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Linus Torvalds, Rafael J. Wysocki, Carl Worth, Eric Anholt,
	Venkatesh Pallipadi, Dave Airlie, Jesse Barnes, David H?rdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

On 2010-06-11 10:32, Ingo Molnar wrote:
> 
> * Jens Axboe <jaxboe@fusionio.com> wrote:
> 
>> On 2010-06-09 03:53, Linus Torvalds wrote:
>>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
>>>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
>>>> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
>>>> Date		: 2010-06-05 06:15 (4 days old)
>>>
>>> This seems to have been introduced by
>>>
>>> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
>>> 	Author: Ingo Molnar <mingo@elte.hu>
>>> 	Date:   Sat Nov 8 17:05:38 2008 +0100
>>>
>>> 	    sched: optimize sched_clock() a bit
>>>     
>>> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
>>> 	    variant of __cycles_2_ns().
>>>     
>>> 	    Most of the time sched_clock() is called with irqs disabled already.
>>> 	    The few places that call it with irqs enabled need to be updated.
>>>     
>>> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
>>>
>>> and this seems to be one of those calling cases that need to be updated..
>>>
>>> Ingo? The call trace is:
>>>
>>> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
>>> 	caller is native_sched_clock+0x3c/0x68
>>> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
>>> 	Call Trace:
>>> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
>>> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
>>> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
>>> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
>>> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
>>> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
>>> 	[<ffffffff81215537>] __make_request+0x338/0x45b
>>> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
>>> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
>>> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
>>> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
>>> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
>>> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
>>> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
>>> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
>>> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
>>> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
>>> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
>>> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
>>>
>>> (from the bugzilla thing)
>>
>> This should be fixed by commit 28f4197e which was merged on friday.
> 
> Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
> configs i get bad spinlock warnings during bootup:
> 
> [   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
> [   28.972003] calling  b44_init+0x0/0x55 @ 1
> [   28.976009] bus: 'pci': add driver b44
> [   28.976374]  sda:
> [   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
> [   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
> [   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
> [   28.980000] Call Trace:
> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> [   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
> [   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
> [   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
> [   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
> [   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
> [   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
> [   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
> [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> [   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
> [   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
> [   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
> [   28.980000]  [<4132dd64>] __make_request+0x335/0x376
> [   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
> [   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> [   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
> [   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
> [   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
> [   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
> [   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
> [   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
> [   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
> [   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
> [   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
> [   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
> [   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
> [   28.980000]  [<41088904>] read_cache_page+0xb/0x12
> [   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
> [   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> [   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
> [   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
> [   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
> [   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
> [   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
> [   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
> [   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
> [   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
> [   28.980000]  [<41332815>] add_disk+0x57/0x95
> [   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
> [   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
> [   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
> [   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
> [   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
> [   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
> [   28.980000]  [<410433df>] kthread+0x5f/0x64
> [   28.980000]  [<41043380>] ? kthread+0x0/0x64
> [   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
> [   29.264071] async/1 used greatest stack depth: 2336 bytes left
> [   29.267020] bus: 'ssb': add driver b44
> [   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
> [   29.267076] calling  init_nic+0x0/0x16 @ 1
> 
> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
> attached. Reproducible on that sha1 and with that config.

I think I see it, the internal CFQ blkg groups are not properly
initialized... Will send a patch shortly.

-- 
Jens Axboe


^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-11  8:32       ` Ingo Molnar
  (?)
  (?)
@ 2010-06-11  8:40       ` Jens Axboe
  -1 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-11  8:40 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Eric Anholt, Carl Worth,
	David H?rdeman, Network Development, Andrew Morton,
	Kernel Testers List, Dave Airlie, Linux PM List, Linux SCSI List

On 2010-06-11 10:32, Ingo Molnar wrote:
> 
> * Jens Axboe <jaxboe@fusionio.com> wrote:
> 
>> On 2010-06-09 03:53, Linus Torvalds wrote:
>>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
>>>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
>>>> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
>>>> Date		: 2010-06-05 06:15 (4 days old)
>>>
>>> This seems to have been introduced by
>>>
>>> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
>>> 	Author: Ingo Molnar <mingo@elte.hu>
>>> 	Date:   Sat Nov 8 17:05:38 2008 +0100
>>>
>>> 	    sched: optimize sched_clock() a bit
>>>     
>>> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
>>> 	    variant of __cycles_2_ns().
>>>     
>>> 	    Most of the time sched_clock() is called with irqs disabled already.
>>> 	    The few places that call it with irqs enabled need to be updated.
>>>     
>>> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
>>>
>>> and this seems to be one of those calling cases that need to be updated..
>>>
>>> Ingo? The call trace is:
>>>
>>> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
>>> 	caller is native_sched_clock+0x3c/0x68
>>> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
>>> 	Call Trace:
>>> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
>>> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
>>> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
>>> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
>>> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
>>> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
>>> 	[<ffffffff81215537>] __make_request+0x338/0x45b
>>> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
>>> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
>>> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
>>> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
>>> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
>>> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
>>> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
>>> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
>>> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
>>> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
>>> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
>>> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
>>>
>>> (from the bugzilla thing)
>>
>> This should be fixed by commit 28f4197e which was merged on friday.
> 
> Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
> configs i get bad spinlock warnings during bootup:
> 
> [   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
> [   28.972003] calling  b44_init+0x0/0x55 @ 1
> [   28.976009] bus: 'pci': add driver b44
> [   28.976374]  sda:
> [   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
> [   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
> [   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
> [   28.980000] Call Trace:
> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> [   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
> [   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
> [   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
> [   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
> [   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
> [   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
> [   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
> [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> [   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
> [   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
> [   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
> [   28.980000]  [<4132dd64>] __make_request+0x335/0x376
> [   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
> [   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> [   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
> [   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
> [   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
> [   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
> [   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
> [   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
> [   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
> [   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
> [   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
> [   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
> [   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
> [   28.980000]  [<41088904>] read_cache_page+0xb/0x12
> [   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
> [   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> [   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
> [   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
> [   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
> [   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
> [   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
> [   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
> [   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
> [   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
> [   28.980000]  [<41332815>] add_disk+0x57/0x95
> [   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
> [   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
> [   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
> [   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
> [   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
> [   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
> [   28.980000]  [<410433df>] kthread+0x5f/0x64
> [   28.980000]  [<41043380>] ? kthread+0x0/0x64
> [   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
> [   29.264071] async/1 used greatest stack depth: 2336 bytes left
> [   29.267020] bus: 'ssb': add driver b44
> [   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
> [   29.267076] calling  init_nic+0x0/0x16 @ 1
> 
> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
> attached. Reproducible on that sha1 and with that config.

I think I see it, the internal CFQ blkg groups are not properly
initialized... Will send a patch shortly.

-- 
Jens Axboe

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11  8:55           ` Ingo Molnar
  0 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-11  8:55 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Linus Torvalds, Rafael J. Wysocki, Carl Worth, Eric Anholt,
	Venkatesh Pallipadi, Dave Airlie, Jesse Barnes, David H?rdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI


* Jens Axboe <jaxboe@fusionio.com> wrote:

> On 2010-06-11 10:32, Ingo Molnar wrote:
> > 
> > * Jens Axboe <jaxboe@fusionio.com> wrote:
> > 
> >> On 2010-06-09 03:53, Linus Torvalds wrote:
> >>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >>>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >>>> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> >>>> Date		: 2010-06-05 06:15 (4 days old)
> >>>
> >>> This seems to have been introduced by
> >>>
> >>> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> >>> 	Author: Ingo Molnar <mingo@elte.hu>
> >>> 	Date:   Sat Nov 8 17:05:38 2008 +0100
> >>>
> >>> 	    sched: optimize sched_clock() a bit
> >>>     
> >>> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> >>> 	    variant of __cycles_2_ns().
> >>>     
> >>> 	    Most of the time sched_clock() is called with irqs disabled already.
> >>> 	    The few places that call it with irqs enabled need to be updated.
> >>>     
> >>> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> >>>
> >>> and this seems to be one of those calling cases that need to be updated..
> >>>
> >>> Ingo? The call trace is:
> >>>
> >>> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> >>> 	caller is native_sched_clock+0x3c/0x68
> >>> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> >>> 	Call Trace:
> >>> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> >>> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> >>> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> >>> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> >>> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> >>> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> >>> 	[<ffffffff81215537>] __make_request+0x338/0x45b
> >>> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> >>> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> >>> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> >>> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> >>> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> >>> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> >>> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> >>> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> >>> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> >>> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> >>> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> >>> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> >>>
> >>> (from the bugzilla thing)
> >>
> >> This should be fixed by commit 28f4197e which was merged on friday.
> > 
> > Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
> > configs i get bad spinlock warnings during bootup:
> > 
> > [   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
> > [   28.972003] calling  b44_init+0x0/0x55 @ 1
> > [   28.976009] bus: 'pci': add driver b44
> > [   28.976374]  sda:
> > [   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
> > [   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
> > [   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
> > [   28.980000] Call Trace:
> > [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> > [   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
> > [   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
> > [   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
> > [   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
> > [   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
> > [   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
> > [   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
> > [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> > [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> > [   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
> > [   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
> > [   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
> > [   28.980000]  [<4132dd64>] __make_request+0x335/0x376
> > [   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
> > [   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
> > [   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
> > [   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
> > [   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
> > [   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
> > [   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
> > [   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
> > [   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
> > [   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
> > [   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
> > [   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
> > [   28.980000]  [<41088904>] read_cache_page+0xb/0x12
> > [   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
> > [   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
> > [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> > [   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
> > [   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
> > [   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
> > [   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
> > [   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
> > [   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
> > [   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
> > [   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
> > [   28.980000]  [<41332815>] add_disk+0x57/0x95
> > [   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
> > [   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
> > [   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
> > [   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
> > [   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
> > [   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
> > [   28.980000]  [<410433df>] kthread+0x5f/0x64
> > [   28.980000]  [<41043380>] ? kthread+0x0/0x64
> > [   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
> > [   29.264071] async/1 used greatest stack depth: 2336 bytes left
> > [   29.267020] bus: 'ssb': add driver b44
> > [   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
> > [   29.267076] calling  init_nic+0x0/0x16 @ 1
> > 
> > Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
> > attached. Reproducible on that sha1 and with that config.
> 
> I think I see it, the internal CFQ blkg groups are not properly
> initialized... Will send a patch shortly.

Cool - can test it with a short turnaround, the bug is easy to reproduce.

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11  8:55           ` Ingo Molnar
  0 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-11  8:55 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Linus Torvalds, Rafael J. Wysocki, Carl Worth, Eric Anholt,
	Venkatesh Pallipadi, Dave Airlie, Jesse Barnes, David H?rdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI


* Jens Axboe <jaxboe-5c4llco8/ftWk0Htik3J/w@public.gmane.org> wrote:

> On 2010-06-11 10:32, Ingo Molnar wrote:
> > 
> > * Jens Axboe <jaxboe-5c4llco8/ftWk0Htik3J/w@public.gmane.org> wrote:
> > 
> >> On 2010-06-09 03:53, Linus Torvalds wrote:
> >>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >>>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >>>> Submitter	: Jan Kreuzer <kontrollator-Mmb7MZpHnFY@public.gmane.org>
> >>>> Date		: 2010-06-05 06:15 (4 days old)
> >>>
> >>> This seems to have been introduced by
> >>>
> >>> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> >>> 	Author: Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org>
> >>> 	Date:   Sat Nov 8 17:05:38 2008 +0100
> >>>
> >>> 	    sched: optimize sched_clock() a bit
> >>>     
> >>> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> >>> 	    variant of __cycles_2_ns().
> >>>     
> >>> 	    Most of the time sched_clock() is called with irqs disabled already.
> >>> 	    The few places that call it with irqs enabled need to be updated.
> >>>     
> >>> 	    Signed-off-by: Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org>
> >>>
> >>> and this seems to be one of those calling cases that need to be updated..
> >>>
> >>> Ingo? The call trace is:
> >>>
> >>> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> >>> 	caller is native_sched_clock+0x3c/0x68
> >>> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> >>> 	Call Trace:
> >>> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> >>> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> >>> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> >>> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> >>> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> >>> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> >>> 	[<ffffffff81215537>] __make_request+0x338/0x45b
> >>> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> >>> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> >>> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> >>> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> >>> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> >>> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> >>> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> >>> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> >>> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> >>> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> >>> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> >>> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> >>>
> >>> (from the bugzilla thing)
> >>
> >> This should be fixed by commit 28f4197e which was merged on friday.
> > 
> > Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
> > configs i get bad spinlock warnings during bootup:
> > 
> > [   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
> > [   28.972003] calling  b44_init+0x0/0x55 @ 1
> > [   28.976009] bus: 'pci': add driver b44
> > [   28.976374]  sda:
> > [   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
> > [   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
> > [   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
> > [   28.980000] Call Trace:
> > [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> > [   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
> > [   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
> > [   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
> > [   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
> > [   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
> > [   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
> > [   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
> > [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> > [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> > [   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
> > [   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
> > [   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
> > [   28.980000]  [<4132dd64>] __make_request+0x335/0x376
> > [   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
> > [   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
> > [   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
> > [   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
> > [   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
> > [   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
> > [   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
> > [   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
> > [   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
> > [   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
> > [   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
> > [   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
> > [   28.980000]  [<41088904>] read_cache_page+0xb/0x12
> > [   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
> > [   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
> > [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> > [   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
> > [   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
> > [   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
> > [   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
> > [   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
> > [   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
> > [   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
> > [   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
> > [   28.980000]  [<41332815>] add_disk+0x57/0x95
> > [   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
> > [   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
> > [   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
> > [   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
> > [   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
> > [   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
> > [   28.980000]  [<410433df>] kthread+0x5f/0x64
> > [   28.980000]  [<41043380>] ? kthread+0x0/0x64
> > [   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
> > [   29.264071] async/1 used greatest stack depth: 2336 bytes left
> > [   29.267020] bus: 'ssb': add driver b44
> > [   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
> > [   29.267076] calling  init_nic+0x0/0x16 @ 1
> > 
> > Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
> > attached. Reproducible on that sha1 and with that config.
> 
> I think I see it, the internal CFQ blkg groups are not properly
> initialized... Will send a patch shortly.

Cool - can test it with a short turnaround, the bug is easy to reproduce.

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-11  8:40       ` Jens Axboe
@ 2010-06-11  8:55         ` Ingo Molnar
  2010-06-11  8:55         ` Ingo Molnar
  2010-06-11  8:55           ` Ingo Molnar
  2 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-11  8:55 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Eric Anholt, Carl Worth,
	David H?rdeman, Network Development, Andrew Morton,
	Kernel Testers List, Dave Airlie, Linux PM List, Linux SCSI List


* Jens Axboe <jaxboe@fusionio.com> wrote:

> On 2010-06-11 10:32, Ingo Molnar wrote:
> > 
> > * Jens Axboe <jaxboe@fusionio.com> wrote:
> > 
> >> On 2010-06-09 03:53, Linus Torvalds wrote:
> >>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >>>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >>>> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> >>>> Date		: 2010-06-05 06:15 (4 days old)
> >>>
> >>> This seems to have been introduced by
> >>>
> >>> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> >>> 	Author: Ingo Molnar <mingo@elte.hu>
> >>> 	Date:   Sat Nov 8 17:05:38 2008 +0100
> >>>
> >>> 	    sched: optimize sched_clock() a bit
> >>>     
> >>> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> >>> 	    variant of __cycles_2_ns().
> >>>     
> >>> 	    Most of the time sched_clock() is called with irqs disabled already.
> >>> 	    The few places that call it with irqs enabled need to be updated.
> >>>     
> >>> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> >>>
> >>> and this seems to be one of those calling cases that need to be updated..
> >>>
> >>> Ingo? The call trace is:
> >>>
> >>> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> >>> 	caller is native_sched_clock+0x3c/0x68
> >>> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> >>> 	Call Trace:
> >>> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> >>> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> >>> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> >>> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> >>> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> >>> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> >>> 	[<ffffffff81215537>] __make_request+0x338/0x45b
> >>> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> >>> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> >>> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> >>> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> >>> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> >>> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> >>> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> >>> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> >>> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> >>> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> >>> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> >>> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> >>>
> >>> (from the bugzilla thing)
> >>
> >> This should be fixed by commit 28f4197e which was merged on friday.
> > 
> > Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
> > configs i get bad spinlock warnings during bootup:
> > 
> > [   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
> > [   28.972003] calling  b44_init+0x0/0x55 @ 1
> > [   28.976009] bus: 'pci': add driver b44
> > [   28.976374]  sda:
> > [   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
> > [   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
> > [   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
> > [   28.980000] Call Trace:
> > [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> > [   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
> > [   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
> > [   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
> > [   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
> > [   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
> > [   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
> > [   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
> > [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> > [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> > [   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
> > [   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
> > [   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
> > [   28.980000]  [<4132dd64>] __make_request+0x335/0x376
> > [   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
> > [   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
> > [   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
> > [   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
> > [   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
> > [   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
> > [   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
> > [   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
> > [   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
> > [   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
> > [   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
> > [   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
> > [   28.980000]  [<41088904>] read_cache_page+0xb/0x12
> > [   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
> > [   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
> > [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> > [   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
> > [   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
> > [   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
> > [   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
> > [   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
> > [   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
> > [   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
> > [   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
> > [   28.980000]  [<41332815>] add_disk+0x57/0x95
> > [   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
> > [   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
> > [   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
> > [   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
> > [   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
> > [   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
> > [   28.980000]  [<410433df>] kthread+0x5f/0x64
> > [   28.980000]  [<41043380>] ? kthread+0x0/0x64
> > [   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
> > [   29.264071] async/1 used greatest stack depth: 2336 bytes left
> > [   29.267020] bus: 'ssb': add driver b44
> > [   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
> > [   29.267076] calling  init_nic+0x0/0x16 @ 1
> > 
> > Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
> > attached. Reproducible on that sha1 and with that config.
> 
> I think I see it, the internal CFQ blkg groups are not properly
> initialized... Will send a patch shortly.

Cool - can test it with a short turnaround, the bug is easy to reproduce.

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-11  8:40       ` Jens Axboe
  2010-06-11  8:55         ` Ingo Molnar
@ 2010-06-11  8:55         ` Ingo Molnar
  2010-06-11  8:55           ` Ingo Molnar
  2 siblings, 0 replies; 129+ messages in thread
From: Ingo Molnar @ 2010-06-11  8:55 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Linux SCSI List,
	Rafael J. Wysocki, Carl Worth, David H?rdeman,
	Network Development, Andrew Morton, Kernel Testers List,
	Linux PM List, Maciej Rutecki


* Jens Axboe <jaxboe@fusionio.com> wrote:

> On 2010-06-11 10:32, Ingo Molnar wrote:
> > 
> > * Jens Axboe <jaxboe@fusionio.com> wrote:
> > 
> >> On 2010-06-09 03:53, Linus Torvalds wrote:
> >>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
> >>>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
> >>>> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
> >>>> Date		: 2010-06-05 06:15 (4 days old)
> >>>
> >>> This seems to have been introduced by
> >>>
> >>> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
> >>> 	Author: Ingo Molnar <mingo@elte.hu>
> >>> 	Date:   Sat Nov 8 17:05:38 2008 +0100
> >>>
> >>> 	    sched: optimize sched_clock() a bit
> >>>     
> >>> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
> >>> 	    variant of __cycles_2_ns().
> >>>     
> >>> 	    Most of the time sched_clock() is called with irqs disabled already.
> >>> 	    The few places that call it with irqs enabled need to be updated.
> >>>     
> >>> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
> >>>
> >>> and this seems to be one of those calling cases that need to be updated..
> >>>
> >>> Ingo? The call trace is:
> >>>
> >>> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
> >>> 	caller is native_sched_clock+0x3c/0x68
> >>> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
> >>> 	Call Trace:
> >>> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
> >>> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
> >>> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
> >>> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
> >>> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
> >>> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
> >>> 	[<ffffffff81215537>] __make_request+0x338/0x45b
> >>> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
> >>> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
> >>> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
> >>> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
> >>> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
> >>> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
> >>> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
> >>> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
> >>> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
> >>> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
> >>> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
> >>> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
> >>>
> >>> (from the bugzilla thing)
> >>
> >> This should be fixed by commit 28f4197e which was merged on friday.
> > 
> > Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
> > configs i get bad spinlock warnings during bootup:
> > 
> > [   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
> > [   28.972003] calling  b44_init+0x0/0x55 @ 1
> > [   28.976009] bus: 'pci': add driver b44
> > [   28.976374]  sda:
> > [   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
> > [   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
> > [   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
> > [   28.980000] Call Trace:
> > [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> > [   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
> > [   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
> > [   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
> > [   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
> > [   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
> > [   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
> > [   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
> > [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> > [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
> > [   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
> > [   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
> > [   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
> > [   28.980000]  [<4132dd64>] __make_request+0x335/0x376
> > [   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
> > [   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
> > [   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
> > [   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
> > [   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
> > [   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
> > [   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
> > [   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
> > [   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
> > [   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
> > [   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
> > [   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
> > [   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
> > [   28.980000]  [<41088904>] read_cache_page+0xb/0x12
> > [   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
> > [   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
> > [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> > [   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
> > [   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
> > [   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
> > [   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
> > [   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
> > [   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
> > [   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
> > [   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
> > [   28.980000]  [<41332815>] add_disk+0x57/0x95
> > [   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
> > [   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
> > [   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
> > [   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
> > [   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
> > [   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
> > [   28.980000]  [<410433df>] kthread+0x5f/0x64
> > [   28.980000]  [<41043380>] ? kthread+0x0/0x64
> > [   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
> > [   29.264071] async/1 used greatest stack depth: 2336 bytes left
> > [   29.267020] bus: 'ssb': add driver b44
> > [   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
> > [   29.267076] calling  init_nic+0x0/0x16 @ 1
> > 
> > Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
> > attached. Reproducible on that sha1 and with that config.
> 
> I think I see it, the internal CFQ blkg groups are not properly
> initialized... Will send a patch shortly.

Cool - can test it with a short turnaround, the bug is easy to reproduce.

Thanks,

	Ingo

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-11  8:55           ` Ingo Molnar
  (?)
  (?)
@ 2010-06-11  9:07           ` Jens Axboe
  -1 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-11  9:07 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Linus Torvalds, Rafael J. Wysocki, Carl Worth, Eric Anholt,
	Venkatesh Pallipadi, Dave Airlie, Jesse Barnes, David H?rdeman,
	Mauro Carvalho Chehab, Eric Dumazet, Linux Kernel Mailing List,
	Maciej Rutecki, Andrew Morton, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI

On 2010-06-11 10:55, Ingo Molnar wrote:
> 
> * Jens Axboe <jaxboe@fusionio.com> wrote:
> 
>> On 2010-06-11 10:32, Ingo Molnar wrote:
>>>
>>> * Jens Axboe <jaxboe@fusionio.com> wrote:
>>>
>>>> On 2010-06-09 03:53, Linus Torvalds wrote:
>>>>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
>>>>>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
>>>>>> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
>>>>>> Date		: 2010-06-05 06:15 (4 days old)
>>>>>
>>>>> This seems to have been introduced by
>>>>>
>>>>> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
>>>>> 	Author: Ingo Molnar <mingo@elte.hu>
>>>>> 	Date:   Sat Nov 8 17:05:38 2008 +0100
>>>>>
>>>>> 	    sched: optimize sched_clock() a bit
>>>>>     
>>>>> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
>>>>> 	    variant of __cycles_2_ns().
>>>>>     
>>>>> 	    Most of the time sched_clock() is called with irqs disabled already.
>>>>> 	    The few places that call it with irqs enabled need to be updated..
>>>>>     
>>>>> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
>>>>>
>>>>> and this seems to be one of those calling cases that need to be updated..
>>>>>
>>>>> Ingo? The call trace is:
>>>>>
>>>>> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
>>>>> 	caller is native_sched_clock+0x3c/0x68
>>>>> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
>>>>> 	Call Trace:
>>>>> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
>>>>> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
>>>>> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
>>>>> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
>>>>> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
>>>>> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
>>>>> 	[<ffffffff81215537>] __make_request+0x338/0x45b
>>>>> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
>>>>> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
>>>>> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
>>>>> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
>>>>> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
>>>>> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
>>>>> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
>>>>> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
>>>>> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
>>>>> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
>>>>> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
>>>>> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
>>>>>
>>>>> (from the bugzilla thing)
>>>>
>>>> This should be fixed by commit 28f4197e which was merged on friday.
>>>
>>> Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
>>> configs i get bad spinlock warnings during bootup:
>>>
>>> [   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
>>> [   28.972003] calling  b44_init+0x0/0x55 @ 1
>>> [   28.976009] bus: 'pci': add driver b44
>>> [   28.976374]  sda:
>>> [   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
>>> [   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
>>> [   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
>>> [   28.980000] Call Trace:
>>> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
>>> [   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
>>> [   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
>>> [   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
>>> [   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
>>> [   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
>>> [   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
>>> [   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
>>> [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
>>> [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
>>> [   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
>>> [   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
>>> [   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
>>> [   28.980000]  [<4132dd64>] __make_request+0x335/0x376
>>> [   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
>>> [   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
>>> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
>>> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
>>> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
>>> [   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
>>> [   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
>>> [   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
>>> [   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
>>> [   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
>>> [   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
>>> [   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
>>> [   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
>>> [   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
>>> [   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
>>> [   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
>>> [   28.980000]  [<41088904>] read_cache_page+0xb/0x12
>>> [   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
>>> [   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
>>> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
>>> [   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
>>> [   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
>>> [   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
>>> [   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
>>> [   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
>>> [   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
>>> [   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
>>> [   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
>>> [   28.980000]  [<41332815>] add_disk+0x57/0x95
>>> [   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
>>> [   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
>>> [   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
>>> [   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
>>> [   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
>>> [   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
>>> [   28.980000]  [<410433df>] kthread+0x5f/0x64
>>> [   28.980000]  [<41043380>] ? kthread+0x0/0x64
>>> [   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
>>> [   29.264071] async/1 used greatest stack depth: 2336 bytes left
>>> [   29.267020] bus: 'ssb': add driver b44
>>> [   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
>>> [   29.267076] calling  init_nic+0x0/0x16 @ 1
>>>
>>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
>>> attached. Reproducible on that sha1 and with that config.
>>
>> I think I see it, the internal CFQ blkg groups are not properly
>> initialized... Will send a patch shortly.
> 
> Cool - can test it with a short turnaround, the bug is easy to reproduce.

Thanks, I need to ensure what the best way to solve it is. The problem
is that if you have BLK_CGROUP set but don't enable the CFQ cgroup
stuff, then you end up calling the real update functions but CFQ has not
initialized them.

-- 
Jens Axboe


^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-11  8:55           ` Ingo Molnar
  (?)
@ 2010-06-11  9:07           ` Jens Axboe
  -1 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-11  9:07 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Venkatesh Pallipadi, DRI, Mauro Carvalho Chehab, Eric Dumazet,
	Linux ACPI, Linus Torvalds, Linux Wireless List,
	Linux Kernel Mailing List, Jesse Barnes, Eric Anholt, Carl Worth,
	David H?rdeman, Network Development, Andrew Morton,
	Kernel Testers List, Dave Airlie, Linux PM List, Linux SCSI List

On 2010-06-11 10:55, Ingo Molnar wrote:
> 
> * Jens Axboe <jaxboe@fusionio.com> wrote:
> 
>> On 2010-06-11 10:32, Ingo Molnar wrote:
>>>
>>> * Jens Axboe <jaxboe@fusionio.com> wrote:
>>>
>>>> On 2010-06-09 03:53, Linus Torvalds wrote:
>>>>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16129
>>>>>> Subject	: BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2
>>>>>> Submitter	: Jan Kreuzer <kontrollator@gmx.de>
>>>>>> Date		: 2010-06-05 06:15 (4 days old)
>>>>>
>>>>> This seems to have been introduced by
>>>>>
>>>>> 	commit 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5
>>>>> 	Author: Ingo Molnar <mingo@elte.hu>
>>>>> 	Date:   Sat Nov 8 17:05:38 2008 +0100
>>>>>
>>>>> 	    sched: optimize sched_clock() a bit
>>>>>     
>>>>> 	    sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling
>>>>> 	    variant of __cycles_2_ns().
>>>>>     
>>>>> 	    Most of the time sched_clock() is called with irqs disabled already.
>>>>> 	    The few places that call it with irqs enabled need to be updated..
>>>>>     
>>>>> 	    Signed-off-by: Ingo Molnar <mingo@elte.hu>
>>>>>
>>>>> and this seems to be one of those calling cases that need to be updated..
>>>>>
>>>>> Ingo? The call trace is:
>>>>>
>>>>> 	BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2-8/337
>>>>> 	caller is native_sched_clock+0x3c/0x68
>>>>> 	Pid: 337, comm: jbd2/sda2-8 Not tainted 2.6.35-rc1jan+ #4
>>>>> 	Call Trace:
>>>>> 	[<ffffffff812362c5>] debug_smp_processor_id+0xc9/0xe4
>>>>> 	[<ffffffff8101059d>] native_sched_clock+0x3c/0x68
>>>>> 	[<ffffffff8101043d>] sched_clock+0x9/0xd
>>>>> 	[<ffffffff81212d7a>] blk_rq_init+0x97/0xa3
>>>>> 	[<ffffffff81214d71>] get_request+0x1c4/0x2d0
>>>>> 	[<ffffffff81214ea6>] get_request_wait+0x29/0x1a6
>>>>> 	[<ffffffff81215537>] __make_request+0x338/0x45b
>>>>> 	[<ffffffff812147c2>] generic_make_request+0x2bb/0x330
>>>>> 	[<ffffffff81214909>] submit_bio+0xd2/0xef
>>>>> 	[<ffffffff811413cb>] submit_bh+0xf4/0x116
>>>>> 	[<ffffffff81144853>] block_write_full_page_endio+0x89/0x96
>>>>> 	[<ffffffff81144875>] block_write_full_page+0x15/0x17
>>>>> 	[<ffffffff8119b00a>] ext4_writepage+0x356/0x36b
>>>>> 	[<ffffffff810e1f91>] __writepage+0x1a/0x39
>>>>> 	[<ffffffff810e32a6>] write_cache_pages+0x20d/0x346
>>>>> 	[<ffffffff810e3406>] generic_writepages+0x27/0x29
>>>>> 	[<ffffffff811ca279>] journal_submit_data_buffers+0x110/0x17d
>>>>> 	[<ffffffff811ca986>] jbd2_journal_commit_transaction+0x4cb/0x156d
>>>>> 	[<ffffffff811d0cba>] kjournald2+0x147/0x37a
>>>>>
>>>>> (from the bugzilla thing)
>>>>
>>>> This should be fixed by commit 28f4197e which was merged on friday.
>>>
>>> Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With some 
>>> configs i get bad spinlock warnings during bootup:
>>>
>>> [   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750 usecs
>>> [   28.972003] calling  b44_init+0x0/0x55 @ 1
>>> [   28.976009] bus: 'pci': add driver b44
>>> [   28.976374]  sda:
>>> [   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
>>> [   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
>>> [   28.980000] Pid: 117, comm: async/0 Not tainted 2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
>>> [   28.980000] Call Trace:
>>> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
>>> [   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
>>> [   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
>>> [   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
>>> [   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
>>> [   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
>>> [   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
>>> [   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425
>>> [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
>>> [   28.980000]  [<41ba9271>] ? _raw_spin_unlock_irqrestore+0x17/0x23
>>> [   28.980000]  [<41329225>] elv_insert+0x107/0x1a0
>>> [   28.980000]  [<41329354>] __elv_add_request+0x96/0x9d
>>> [   28.980000]  [<4132bb8c>] ? drive_stat_acct+0x9d/0xc6
>>> [   28.980000]  [<4132dd64>] __make_request+0x335/0x376
>>> [   28.980000]  [<4132c726>] generic_make_request+0x336/0x39d
>>> [   28.980000]  [<410ad422>] ? kmem_cache_alloc+0xa1/0x105
>>> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
>>> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
>>> [   28.980000]  [<41089285>] ? mempool_alloc_slab+0xe/0x10
>>> [   28.980000]  [<41089347>] ? mempool_alloc+0x57/0xe2
>>> [   28.980000]  [<4132c804>] submit_bio+0x77/0x8f
>>> [   28.980000]  [<410d2cbc>] ? bio_alloc_bioset+0x37/0x94
>>> [   28.980000]  [<410ceb90>] submit_bh+0xc3/0xe2
>>> [   28.980000]  [<410d1474>] block_read_full_page+0x249/0x259
>>> [   28.980000]  [<410d31fb>] ? blkdev_get_block+0x0/0xc6
>>> [   28.980000]  [<41087bfa>] ? add_to_page_cache_locked+0x94/0xb5
>>> [   28.980000]  [<410d3d92>] blkdev_readpage+0xf/0x11
>>> [   28.980000]  [<41088823>] do_read_cache_page+0x7d/0x11a
>>> [   28.980000]  [<410d3d83>] ? blkdev_readpage+0x0/0x11
>>> [   28.980000]  [<410888f4>] read_cache_page_async+0x16/0x1b
>>> [   28.980000]  [<41088904>] read_cache_page+0xb/0x12
>>> [   28.980000]  [<410e80e1>] read_dev_sector+0x2a/0x63
>>> [   28.980000]  [<410e92e8>] adfspart_check_ICS+0x2e/0x166
>>> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
>>> [   28.980000]  [<410e8d23>] rescan_partitions+0x196/0x3e4
>>> [   28.980000]  [<41ba7dc7>] ? __mutex_unlock_slowpath+0x98/0x9f
>>> [   28.980000]  [<410e92ba>] ? adfspart_check_ICS+0x0/0x166
>>> [   28.980000]  [<410d4277>] __blkdev_get+0x1e7/0x292
>>> [   28.980000]  [<4133a201>] ? kobject_put+0x14/0x16
>>> [   28.980000]  [<410d432c>] blkdev_get+0xa/0xc
>>> [   28.980000]  [<410e81fb>] register_disk+0x94/0xe5
>>> [   28.980000]  [<413326c6>] ? blk_register_region+0x1b/0x20
>>> [   28.980000]  [<41332815>] add_disk+0x57/0x95
>>> [   28.980000]  [<41331fc6>] ? exact_match+0x0/0x8
>>> [   28.980000]  [<4133233f>] ? exact_lock+0x0/0x11
>>> [   28.980000]  [<41643848>] sd_probe_async+0x108/0x1be
>>> [   28.980000]  [<41048865>] async_thread+0xf5/0x1e6
>>> [   28.980000]  [<4102cbcb>] ? default_wake_function+0x0/0xd
>>> [   28.980000]  [<41048770>] ? async_thread+0x0/0x1e6
>>> [   28.980000]  [<410433df>] kthread+0x5f/0x64
>>> [   28.980000]  [<41043380>] ? kthread+0x0/0x64
>>> [   28.980000]  [<41002cc6>] kernel_thread_helper+0x6/0x10
>>> [   29.264071] async/1 used greatest stack depth: 2336 bytes left
>>> [   29.267020] bus: 'ssb': add driver b44
>>> [   29.267072] initcall b44_init+0x0/0x55 returned 0 after 281250 usecs
>>> [   29.267076] calling  init_nic+0x0/0x16 @ 1
>>>
>>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
>>> attached. Reproducible on that sha1 and with that config.
>>
>> I think I see it, the internal CFQ blkg groups are not properly
>> initialized... Will send a patch shortly.
> 
> Cool - can test it with a short turnaround, the bug is easy to reproduce.

Thanks, I need to ensure what the best way to solve it is. The problem
is that if you have BLK_CGROUP set but don't enable the CFQ cgroup
stuff, then you end up calling the real update functions but CFQ has not
initialized them.

-- 
Jens Axboe

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11  9:18             ` Jens Axboe
  0 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-11  9:18 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Linus Torvalds, Rafael J. Wysocki, Carl Worth, Eric Anholt,
	vgoyal, Divyesh Shah, guijianfeng, Linux Kernel Mailing List,
	Andrew Morton, Kernel Testers List

On 2010-06-11 10:55, Ingo Molnar wrote:
>>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
>>> attached. Reproducible on that sha1 and with that config.
>>
>> I think I see it, the internal CFQ blkg groups are not properly
>> initialized... Will send a patch shortly.
> 
> Cool - can test it with a short turnaround, the bug is easy to reproduce.

Here's a nasty patch that should fix it. Not optimal, since we really
just want empty functions for these when cfq group scheduling is not
defined.

CC'ing the guilty parties to come up with a better patch that does NOT
involve ifdefs in cfq-iosched.c. We want blk-cgroup.[ch] fixed up.
And trimming the CC list a bit.


diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 5ff4f48..7067c97 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -879,7 +879,9 @@ cfq_group_service_tree_del(struct cfq_data *cfqd, struct cfq_group *cfqg)
 	if (!RB_EMPTY_NODE(&cfqg->rb_node))
 		cfq_rb_erase(&cfqg->rb_node, st);
 	cfqg->saved_workload_slice = 0;
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
+#endif
 }
 
 static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq)
@@ -939,8 +941,10 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
 
 	cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
 					st->min_vdisktime);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
 	blkiocg_set_start_empty_time(&cfqg->blkg);
+#endif
 }
 
 #ifdef CONFIG_CFQ_GROUP_IOSCHED
@@ -1421,12 +1425,17 @@ static void cfq_reposition_rq_rb(struct cfq_queue *cfqq, struct request *rq)
 {
 	elv_rb_del(&cfqq->sort_list, rq);
 	cfqq->queued[rq_is_sync(rq)]--;
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
 						rq_is_sync(rq));
+#endif
 	cfq_add_rq_rb(rq);
+
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
 			&cfqq->cfqd->serving_group->blkg, rq_data_dir(rq),
 			rq_is_sync(rq));
+#endif
 }
 
 static struct request *
@@ -1482,8 +1491,10 @@ static void cfq_remove_request(struct request *rq)
 	cfq_del_rq_rb(rq);
 
 	cfqq->cfqd->rq_queued--;
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
 						rq_is_sync(rq));
+#endif
 	if (rq_is_meta(rq)) {
 		WARN_ON(!cfqq->meta_pending);
 		cfqq->meta_pending--;
@@ -1518,8 +1529,10 @@ static void cfq_merged_request(struct request_queue *q, struct request *req,
 static void cfq_bio_merged(struct request_queue *q, struct request *req,
 				struct bio *bio)
 {
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg, bio_data_dir(bio),
 					cfq_bio_sync(bio));
+#endif
 }
 
 static void
@@ -1539,8 +1552,10 @@ cfq_merged_requests(struct request_queue *q, struct request *rq,
 	if (cfqq->next_rq == next)
 		cfqq->next_rq = rq;
 	cfq_remove_request(next);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(next),
 					rq_is_sync(next));
+#endif
 }
 
 static int cfq_allow_merge(struct request_queue *q, struct request *rq,
@@ -1571,7 +1586,9 @@ static int cfq_allow_merge(struct request_queue *q, struct request *rq,
 static inline void cfq_del_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
 	del_timer(&cfqd->idle_slice_timer);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
+#endif
 }
 
 static void __cfq_set_active_queue(struct cfq_data *cfqd,
@@ -1580,7 +1597,9 @@ static void __cfq_set_active_queue(struct cfq_data *cfqd,
 	if (cfqq) {
 		cfq_log_cfqq(cfqd, cfqq, "set_active wl_prio:%d wl_type:%d",
 				cfqd->serving_prio, cfqd->serving_type);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 		blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
+#endif
 		cfqq->slice_start = 0;
 		cfqq->dispatch_start = jiffies;
 		cfqq->allocated_slice = 0;
@@ -1911,7 +1930,9 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 	sl = cfqd->cfq_slice_idle;
 
 	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
+#endif
 	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
 }
 
@@ -1931,8 +1952,10 @@ static void cfq_dispatch_insert(struct request_queue *q, struct request *rq)
 	elv_dispatch_sort(q, rq);
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++;
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
 					rq_data_dir(rq), rq_is_sync(rq));
+#endif
 }
 
 /*
@@ -3248,8 +3271,10 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 				cfq_clear_cfqq_wait_request(cfqq);
 				__blk_run_queue(cfqd->queue);
 			} else {
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 				blkiocg_update_idle_time_stats(
 						&cfqq->cfqg->blkg);
+#endif
 				cfq_mark_cfqq_must_dispatch(cfqq);
 			}
 		}
@@ -3276,9 +3301,11 @@ static void cfq_insert_request(struct request_queue *q, struct request *rq)
 	rq_set_fifo_time(rq, jiffies + cfqd->cfq_fifo_expire[rq_is_sync(rq)]);
 	list_add_tail(&rq->queuelist, &cfqq->fifo);
 	cfq_add_rq_rb(rq);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
 			&cfqd->serving_group->blkg, rq_data_dir(rq),
 			rq_is_sync(rq));
+#endif
 	cfq_rq_enqueued(cfqd, cfqq, rq);
 }
 
@@ -3364,9 +3391,11 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
 	WARN_ON(!cfqq->dispatched);
 	cfqd->rq_in_driver--;
 	cfqq->dispatched--;
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_completion_stats(&cfqq->cfqg->blkg, rq_start_time_ns(rq),
 			rq_io_start_time_ns(rq), rq_data_dir(rq),
 			rq_is_sync(rq));
+#endif
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]--;
 
@@ -3730,7 +3759,9 @@ static void cfq_exit_queue(struct elevator_queue *e)
 
 	cfq_put_async_queues(cfqd);
 	cfq_release_cfq_groups(cfqd);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_del_blkio_group(&cfqd->root_group.blkg);
+#endif
 
 	spin_unlock_irq(q->queue_lock);
 

-- 
Jens Axboe


^ permalink raw reply related	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11  9:18             ` Jens Axboe
  0 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-11  9:18 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Linus Torvalds, Rafael J. Wysocki, Carl Worth, Eric Anholt,
	vgoyal-H+wXaHxf7aLQT0dZR+AlfA, Divyesh Shah,
	guijianfeng-BthXqXjhjHXQFUHtdCDX3A, Linux Kernel Mailing List,
	Andrew Morton, Kernel Testers List

On 2010-06-11 10:55, Ingo Molnar wrote:
>>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
>>> attached. Reproducible on that sha1 and with that config.
>>
>> I think I see it, the internal CFQ blkg groups are not properly
>> initialized... Will send a patch shortly.
> 
> Cool - can test it with a short turnaround, the bug is easy to reproduce.

Here's a nasty patch that should fix it. Not optimal, since we really
just want empty functions for these when cfq group scheduling is not
defined.

CC'ing the guilty parties to come up with a better patch that does NOT
involve ifdefs in cfq-iosched.c. We want blk-cgroup.[ch] fixed up.
And trimming the CC list a bit.


diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 5ff4f48..7067c97 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -879,7 +879,9 @@ cfq_group_service_tree_del(struct cfq_data *cfqd, struct cfq_group *cfqg)
 	if (!RB_EMPTY_NODE(&cfqg->rb_node))
 		cfq_rb_erase(&cfqg->rb_node, st);
 	cfqg->saved_workload_slice = 0;
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
+#endif
 }
 
 static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq)
@@ -939,8 +941,10 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
 
 	cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
 					st->min_vdisktime);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
 	blkiocg_set_start_empty_time(&cfqg->blkg);
+#endif
 }
 
 #ifdef CONFIG_CFQ_GROUP_IOSCHED
@@ -1421,12 +1425,17 @@ static void cfq_reposition_rq_rb(struct cfq_queue *cfqq, struct request *rq)
 {
 	elv_rb_del(&cfqq->sort_list, rq);
 	cfqq->queued[rq_is_sync(rq)]--;
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
 						rq_is_sync(rq));
+#endif
 	cfq_add_rq_rb(rq);
+
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
 			&cfqq->cfqd->serving_group->blkg, rq_data_dir(rq),
 			rq_is_sync(rq));
+#endif
 }
 
 static struct request *
@@ -1482,8 +1491,10 @@ static void cfq_remove_request(struct request *rq)
 	cfq_del_rq_rb(rq);
 
 	cfqq->cfqd->rq_queued--;
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
 						rq_is_sync(rq));
+#endif
 	if (rq_is_meta(rq)) {
 		WARN_ON(!cfqq->meta_pending);
 		cfqq->meta_pending--;
@@ -1518,8 +1529,10 @@ static void cfq_merged_request(struct request_queue *q, struct request *req,
 static void cfq_bio_merged(struct request_queue *q, struct request *req,
 				struct bio *bio)
 {
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg, bio_data_dir(bio),
 					cfq_bio_sync(bio));
+#endif
 }
 
 static void
@@ -1539,8 +1552,10 @@ cfq_merged_requests(struct request_queue *q, struct request *rq,
 	if (cfqq->next_rq == next)
 		cfqq->next_rq = rq;
 	cfq_remove_request(next);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(next),
 					rq_is_sync(next));
+#endif
 }
 
 static int cfq_allow_merge(struct request_queue *q, struct request *rq,
@@ -1571,7 +1586,9 @@ static int cfq_allow_merge(struct request_queue *q, struct request *rq,
 static inline void cfq_del_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
 	del_timer(&cfqd->idle_slice_timer);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
+#endif
 }
 
 static void __cfq_set_active_queue(struct cfq_data *cfqd,
@@ -1580,7 +1597,9 @@ static void __cfq_set_active_queue(struct cfq_data *cfqd,
 	if (cfqq) {
 		cfq_log_cfqq(cfqd, cfqq, "set_active wl_prio:%d wl_type:%d",
 				cfqd->serving_prio, cfqd->serving_type);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 		blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
+#endif
 		cfqq->slice_start = 0;
 		cfqq->dispatch_start = jiffies;
 		cfqq->allocated_slice = 0;
@@ -1911,7 +1930,9 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 	sl = cfqd->cfq_slice_idle;
 
 	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
+#endif
 	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
 }
 
@@ -1931,8 +1952,10 @@ static void cfq_dispatch_insert(struct request_queue *q, struct request *rq)
 	elv_dispatch_sort(q, rq);
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++;
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
 					rq_data_dir(rq), rq_is_sync(rq));
+#endif
 }
 
 /*
@@ -3248,8 +3271,10 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 				cfq_clear_cfqq_wait_request(cfqq);
 				__blk_run_queue(cfqd->queue);
 			} else {
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 				blkiocg_update_idle_time_stats(
 						&cfqq->cfqg->blkg);
+#endif
 				cfq_mark_cfqq_must_dispatch(cfqq);
 			}
 		}
@@ -3276,9 +3301,11 @@ static void cfq_insert_request(struct request_queue *q, struct request *rq)
 	rq_set_fifo_time(rq, jiffies + cfqd->cfq_fifo_expire[rq_is_sync(rq)]);
 	list_add_tail(&rq->queuelist, &cfqq->fifo);
 	cfq_add_rq_rb(rq);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
 			&cfqd->serving_group->blkg, rq_data_dir(rq),
 			rq_is_sync(rq));
+#endif
 	cfq_rq_enqueued(cfqd, cfqq, rq);
 }
 
@@ -3364,9 +3391,11 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
 	WARN_ON(!cfqq->dispatched);
 	cfqd->rq_in_driver--;
 	cfqq->dispatched--;
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_update_completion_stats(&cfqq->cfqg->blkg, rq_start_time_ns(rq),
 			rq_io_start_time_ns(rq), rq_data_dir(rq),
 			rq_is_sync(rq));
+#endif
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]--;
 
@@ -3730,7 +3759,9 @@ static void cfq_exit_queue(struct elevator_queue *e)
 
 	cfq_put_async_queues(cfqd);
 	cfq_release_cfq_groups(cfqd);
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	blkiocg_del_blkio_group(&cfqd->root_group.blkg);
+#endif
 
 	spin_unlock_irq(q->queue_lock);
 

-- 
Jens Axboe

^ permalink raw reply related	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11 19:07               ` Vivek Goyal
  0 siblings, 0 replies; 129+ messages in thread
From: Vivek Goyal @ 2010-06-11 19:07 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Carl Worth,
	Eric Anholt, Divyesh Shah, guijianfeng,
	Linux Kernel Mailing List, Andrew Morton, Kernel Testers List

On Fri, Jun 11, 2010 at 11:18:47AM +0200, Jens Axboe wrote:
> On 2010-06-11 10:55, Ingo Molnar wrote:
> >>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
> >>> attached. Reproducible on that sha1 and with that config.
> >>
> >> I think I see it, the internal CFQ blkg groups are not properly
> >> initialized... Will send a patch shortly.
> > 
> > Cool - can test it with a short turnaround, the bug is easy to reproduce.
> 
> Here's a nasty patch that should fix it. Not optimal, since we really
> just want empty functions for these when cfq group scheduling is not
> defined.
> 
> CC'ing the guilty parties to come up with a better patch that does NOT
> involve ifdefs in cfq-iosched.c. We want blk-cgroup.[ch] fixed up.
> And trimming the CC list a bit.

Jens, Ingo, I am sorry for this mess.

Jens,

How about introducing "block/cfq.h" and declaring additional set of wrapper
functions to update blkiocg stats and make these do nothing if
CFQ_GROUP_IOSCHED=n.

For example, in linux-2.6/block/cfq.h, we can define functions as follows.

#ifdef CONFIG_CFQ_GROUP_IOSCHED
cfq_blkiocg_update_dequeue_stats () {
	blkiocg_update_dequeue_stats()
}
#else
cfq_blkiocg_update_dequeue_stats () {}
#endif

Fixing it blk-cgroup.[ch] might not be best as BLK_CGROUP is set.
Secondly, if there are other IO control policies later, they might
want to make use of BLK_CGROUP while cfq has disabled the group io 
scheduling.

I will prepare a patch and see how does it look.

Thanks
Vivek

> 
> 
> diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
> index 5ff4f48..7067c97 100644
> --- a/block/cfq-iosched.c
> +++ b/block/cfq-iosched.c
> @@ -879,7 +879,9 @@ cfq_group_service_tree_del(struct cfq_data *cfqd, struct cfq_group *cfqg)
>  	if (!RB_EMPTY_NODE(&cfqg->rb_node))
>  		cfq_rb_erase(&cfqg->rb_node, st);
>  	cfqg->saved_workload_slice = 0;
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
> +#endif
>  }
>  
>  static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq)
> @@ -939,8 +941,10 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
>  
>  	cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
>  					st->min_vdisktime);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
>  	blkiocg_set_start_empty_time(&cfqg->blkg);
> +#endif
>  }
>  
>  #ifdef CONFIG_CFQ_GROUP_IOSCHED
> @@ -1421,12 +1425,17 @@ static void cfq_reposition_rq_rb(struct cfq_queue *cfqq, struct request *rq)
>  {
>  	elv_rb_del(&cfqq->sort_list, rq);
>  	cfqq->queued[rq_is_sync(rq)]--;
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
>  						rq_is_sync(rq));
> +#endif
>  	cfq_add_rq_rb(rq);
> +
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
>  			&cfqq->cfqd->serving_group->blkg, rq_data_dir(rq),
>  			rq_is_sync(rq));
> +#endif
>  }
>  
>  static struct request *
> @@ -1482,8 +1491,10 @@ static void cfq_remove_request(struct request *rq)
>  	cfq_del_rq_rb(rq);
>  
>  	cfqq->cfqd->rq_queued--;
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
>  						rq_is_sync(rq));
> +#endif
>  	if (rq_is_meta(rq)) {
>  		WARN_ON(!cfqq->meta_pending);
>  		cfqq->meta_pending--;
> @@ -1518,8 +1529,10 @@ static void cfq_merged_request(struct request_queue *q, struct request *req,
>  static void cfq_bio_merged(struct request_queue *q, struct request *req,
>  				struct bio *bio)
>  {
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg, bio_data_dir(bio),
>  					cfq_bio_sync(bio));
> +#endif
>  }
>  
>  static void
> @@ -1539,8 +1552,10 @@ cfq_merged_requests(struct request_queue *q, struct request *rq,
>  	if (cfqq->next_rq == next)
>  		cfqq->next_rq = rq;
>  	cfq_remove_request(next);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(next),
>  					rq_is_sync(next));
> +#endif
>  }
>  
>  static int cfq_allow_merge(struct request_queue *q, struct request *rq,
> @@ -1571,7 +1586,9 @@ static int cfq_allow_merge(struct request_queue *q, struct request *rq,
>  static inline void cfq_del_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
>  {
>  	del_timer(&cfqd->idle_slice_timer);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
> +#endif
>  }
>  
>  static void __cfq_set_active_queue(struct cfq_data *cfqd,
> @@ -1580,7 +1597,9 @@ static void __cfq_set_active_queue(struct cfq_data *cfqd,
>  	if (cfqq) {
>  		cfq_log_cfqq(cfqd, cfqq, "set_active wl_prio:%d wl_type:%d",
>  				cfqd->serving_prio, cfqd->serving_type);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  		blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
> +#endif
>  		cfqq->slice_start = 0;
>  		cfqq->dispatch_start = jiffies;
>  		cfqq->allocated_slice = 0;
> @@ -1911,7 +1930,9 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
>  	sl = cfqd->cfq_slice_idle;
>  
>  	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
> +#endif
>  	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
>  }
>  
> @@ -1931,8 +1952,10 @@ static void cfq_dispatch_insert(struct request_queue *q, struct request *rq)
>  	elv_dispatch_sort(q, rq);
>  
>  	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++;
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
>  					rq_data_dir(rq), rq_is_sync(rq));
> +#endif
>  }
>  
>  /*
> @@ -3248,8 +3271,10 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
>  				cfq_clear_cfqq_wait_request(cfqq);
>  				__blk_run_queue(cfqd->queue);
>  			} else {
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  				blkiocg_update_idle_time_stats(
>  						&cfqq->cfqg->blkg);
> +#endif
>  				cfq_mark_cfqq_must_dispatch(cfqq);
>  			}
>  		}
> @@ -3276,9 +3301,11 @@ static void cfq_insert_request(struct request_queue *q, struct request *rq)
>  	rq_set_fifo_time(rq, jiffies + cfqd->cfq_fifo_expire[rq_is_sync(rq)]);
>  	list_add_tail(&rq->queuelist, &cfqq->fifo);
>  	cfq_add_rq_rb(rq);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
>  			&cfqd->serving_group->blkg, rq_data_dir(rq),
>  			rq_is_sync(rq));
> +#endif
>  	cfq_rq_enqueued(cfqd, cfqq, rq);
>  }
>  
> @@ -3364,9 +3391,11 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
>  	WARN_ON(!cfqq->dispatched);
>  	cfqd->rq_in_driver--;
>  	cfqq->dispatched--;
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_completion_stats(&cfqq->cfqg->blkg, rq_start_time_ns(rq),
>  			rq_io_start_time_ns(rq), rq_data_dir(rq),
>  			rq_is_sync(rq));
> +#endif
>  
>  	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]--;
>  
> @@ -3730,7 +3759,9 @@ static void cfq_exit_queue(struct elevator_queue *e)
>  
>  	cfq_put_async_queues(cfqd);
>  	cfq_release_cfq_groups(cfqd);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_del_blkio_group(&cfqd->root_group.blkg);
> +#endif
>  
>  	spin_unlock_irq(q->queue_lock);
>  
> 
> -- 
> Jens Axboe

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11 19:07               ` Vivek Goyal
  0 siblings, 0 replies; 129+ messages in thread
From: Vivek Goyal @ 2010-06-11 19:07 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Carl Worth,
	Eric Anholt, Divyesh Shah, guijianfeng-BthXqXjhjHXQFUHtdCDX3A,
	Linux Kernel Mailing List, Andrew Morton, Kernel Testers List

On Fri, Jun 11, 2010 at 11:18:47AM +0200, Jens Axboe wrote:
> On 2010-06-11 10:55, Ingo Molnar wrote:
> >>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
> >>> attached. Reproducible on that sha1 and with that config.
> >>
> >> I think I see it, the internal CFQ blkg groups are not properly
> >> initialized... Will send a patch shortly.
> > 
> > Cool - can test it with a short turnaround, the bug is easy to reproduce.
> 
> Here's a nasty patch that should fix it. Not optimal, since we really
> just want empty functions for these when cfq group scheduling is not
> defined.
> 
> CC'ing the guilty parties to come up with a better patch that does NOT
> involve ifdefs in cfq-iosched.c. We want blk-cgroup.[ch] fixed up.
> And trimming the CC list a bit.

Jens, Ingo, I am sorry for this mess.

Jens,

How about introducing "block/cfq.h" and declaring additional set of wrapper
functions to update blkiocg stats and make these do nothing if
CFQ_GROUP_IOSCHED=n.

For example, in linux-2.6/block/cfq.h, we can define functions as follows.

#ifdef CONFIG_CFQ_GROUP_IOSCHED
cfq_blkiocg_update_dequeue_stats () {
	blkiocg_update_dequeue_stats()
}
#else
cfq_blkiocg_update_dequeue_stats () {}
#endif

Fixing it blk-cgroup.[ch] might not be best as BLK_CGROUP is set.
Secondly, if there are other IO control policies later, they might
want to make use of BLK_CGROUP while cfq has disabled the group io 
scheduling.

I will prepare a patch and see how does it look.

Thanks
Vivek

> 
> 
> diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
> index 5ff4f48..7067c97 100644
> --- a/block/cfq-iosched.c
> +++ b/block/cfq-iosched.c
> @@ -879,7 +879,9 @@ cfq_group_service_tree_del(struct cfq_data *cfqd, struct cfq_group *cfqg)
>  	if (!RB_EMPTY_NODE(&cfqg->rb_node))
>  		cfq_rb_erase(&cfqg->rb_node, st);
>  	cfqg->saved_workload_slice = 0;
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
> +#endif
>  }
>  
>  static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq)
> @@ -939,8 +941,10 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
>  
>  	cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
>  					st->min_vdisktime);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
>  	blkiocg_set_start_empty_time(&cfqg->blkg);
> +#endif
>  }
>  
>  #ifdef CONFIG_CFQ_GROUP_IOSCHED
> @@ -1421,12 +1425,17 @@ static void cfq_reposition_rq_rb(struct cfq_queue *cfqq, struct request *rq)
>  {
>  	elv_rb_del(&cfqq->sort_list, rq);
>  	cfqq->queued[rq_is_sync(rq)]--;
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
>  						rq_is_sync(rq));
> +#endif
>  	cfq_add_rq_rb(rq);
> +
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
>  			&cfqq->cfqd->serving_group->blkg, rq_data_dir(rq),
>  			rq_is_sync(rq));
> +#endif
>  }
>  
>  static struct request *
> @@ -1482,8 +1491,10 @@ static void cfq_remove_request(struct request *rq)
>  	cfq_del_rq_rb(rq);
>  
>  	cfqq->cfqd->rq_queued--;
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
>  						rq_is_sync(rq));
> +#endif
>  	if (rq_is_meta(rq)) {
>  		WARN_ON(!cfqq->meta_pending);
>  		cfqq->meta_pending--;
> @@ -1518,8 +1529,10 @@ static void cfq_merged_request(struct request_queue *q, struct request *req,
>  static void cfq_bio_merged(struct request_queue *q, struct request *req,
>  				struct bio *bio)
>  {
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg, bio_data_dir(bio),
>  					cfq_bio_sync(bio));
> +#endif
>  }
>  
>  static void
> @@ -1539,8 +1552,10 @@ cfq_merged_requests(struct request_queue *q, struct request *rq,
>  	if (cfqq->next_rq == next)
>  		cfqq->next_rq = rq;
>  	cfq_remove_request(next);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(next),
>  					rq_is_sync(next));
> +#endif
>  }
>  
>  static int cfq_allow_merge(struct request_queue *q, struct request *rq,
> @@ -1571,7 +1586,9 @@ static int cfq_allow_merge(struct request_queue *q, struct request *rq,
>  static inline void cfq_del_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
>  {
>  	del_timer(&cfqd->idle_slice_timer);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
> +#endif
>  }
>  
>  static void __cfq_set_active_queue(struct cfq_data *cfqd,
> @@ -1580,7 +1597,9 @@ static void __cfq_set_active_queue(struct cfq_data *cfqd,
>  	if (cfqq) {
>  		cfq_log_cfqq(cfqd, cfqq, "set_active wl_prio:%d wl_type:%d",
>  				cfqd->serving_prio, cfqd->serving_type);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  		blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
> +#endif
>  		cfqq->slice_start = 0;
>  		cfqq->dispatch_start = jiffies;
>  		cfqq->allocated_slice = 0;
> @@ -1911,7 +1930,9 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
>  	sl = cfqd->cfq_slice_idle;
>  
>  	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
> +#endif
>  	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
>  }
>  
> @@ -1931,8 +1952,10 @@ static void cfq_dispatch_insert(struct request_queue *q, struct request *rq)
>  	elv_dispatch_sort(q, rq);
>  
>  	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++;
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
>  					rq_data_dir(rq), rq_is_sync(rq));
> +#endif
>  }
>  
>  /*
> @@ -3248,8 +3271,10 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
>  				cfq_clear_cfqq_wait_request(cfqq);
>  				__blk_run_queue(cfqd->queue);
>  			} else {
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  				blkiocg_update_idle_time_stats(
>  						&cfqq->cfqg->blkg);
> +#endif
>  				cfq_mark_cfqq_must_dispatch(cfqq);
>  			}
>  		}
> @@ -3276,9 +3301,11 @@ static void cfq_insert_request(struct request_queue *q, struct request *rq)
>  	rq_set_fifo_time(rq, jiffies + cfqd->cfq_fifo_expire[rq_is_sync(rq)]);
>  	list_add_tail(&rq->queuelist, &cfqq->fifo);
>  	cfq_add_rq_rb(rq);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
>  			&cfqd->serving_group->blkg, rq_data_dir(rq),
>  			rq_is_sync(rq));
> +#endif
>  	cfq_rq_enqueued(cfqd, cfqq, rq);
>  }
>  
> @@ -3364,9 +3391,11 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
>  	WARN_ON(!cfqq->dispatched);
>  	cfqd->rq_in_driver--;
>  	cfqq->dispatched--;
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_update_completion_stats(&cfqq->cfqg->blkg, rq_start_time_ns(rq),
>  			rq_io_start_time_ns(rq), rq_data_dir(rq),
>  			rq_is_sync(rq));
> +#endif
>  
>  	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]--;
>  
> @@ -3730,7 +3759,9 @@ static void cfq_exit_queue(struct elevator_queue *e)
>  
>  	cfq_put_async_queues(cfqd);
>  	cfq_release_cfq_groups(cfqd);
> +#ifdef CONFIG_CFQ_GROUP_IOSCHED
>  	blkiocg_del_blkio_group(&cfqd->root_group.blkg);
> +#endif
>  
>  	spin_unlock_irq(q->queue_lock);
>  
> 
> -- 
> Jens Axboe

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11 19:11                 ` Jens Axboe
  0 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-11 19:11 UTC (permalink / raw)
  To: Vivek Goyal
  Cc: Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Carl Worth,
	Eric Anholt, Divyesh Shah, guijianfeng,
	Linux Kernel Mailing List, Andrew Morton, Kernel Testers List

On 11/06/10 21.07, Vivek Goyal wrote:
> On Fri, Jun 11, 2010 at 11:18:47AM +0200, Jens Axboe wrote:
>> On 2010-06-11 10:55, Ingo Molnar wrote:
>>>>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
>>>>> attached. Reproducible on that sha1 and with that config.
>>>>
>>>> I think I see it, the internal CFQ blkg groups are not properly
>>>> initialized... Will send a patch shortly.
>>>
>>> Cool - can test it with a short turnaround, the bug is easy to reproduce.
>>
>> Here's a nasty patch that should fix it. Not optimal, since we really
>> just want empty functions for these when cfq group scheduling is not
>> defined.
>>
>> CC'ing the guilty parties to come up with a better patch that does NOT
>> involve ifdefs in cfq-iosched.c. We want blk-cgroup.[ch] fixed up.
>> And trimming the CC list a bit.
> 
> Jens, Ingo, I am sorry for this mess.
> 
> Jens,
> 
> How about introducing "block/cfq.h" and declaring additional set of wrapper
> functions to update blkiocg stats and make these do nothing if
> CFQ_GROUP_IOSCHED=n.
> 
> For example, in linux-2.6/block/cfq.h, we can define functions as follows.
> 
> #ifdef CONFIG_CFQ_GROUP_IOSCHED
> cfq_blkiocg_update_dequeue_stats () {
> 	blkiocg_update_dequeue_stats()
> }
> #else
> cfq_blkiocg_update_dequeue_stats () {}
> #endif
> 
> Fixing it blk-cgroup.[ch] might not be best as BLK_CGROUP is set.
> Secondly, if there are other IO control policies later, they might
> want to make use of BLK_CGROUP while cfq has disabled the group io 
> scheduling.

I already tried such a patch, but it's not exactly pretty. How about
splitting blk-cgroup.c into two parts, one that is built for
BLK_CGROUP and an additional one that is also built for
CFQ_GROUP_SCHED? Lets try and improve on the ifdef mess, not extend
it.

-- 
Jens Axboe


^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11 19:11                 ` Jens Axboe
  0 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-11 19:11 UTC (permalink / raw)
  To: Vivek Goyal
  Cc: Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Carl Worth,
	Eric Anholt, Divyesh Shah, guijianfeng-BthXqXjhjHXQFUHtdCDX3A,
	Linux Kernel Mailing List, Andrew Morton, Kernel Testers List

On 11/06/10 21.07, Vivek Goyal wrote:
> On Fri, Jun 11, 2010 at 11:18:47AM +0200, Jens Axboe wrote:
>> On 2010-06-11 10:55, Ingo Molnar wrote:
>>>>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
>>>>> attached. Reproducible on that sha1 and with that config.
>>>>
>>>> I think I see it, the internal CFQ blkg groups are not properly
>>>> initialized... Will send a patch shortly.
>>>
>>> Cool - can test it with a short turnaround, the bug is easy to reproduce.
>>
>> Here's a nasty patch that should fix it. Not optimal, since we really
>> just want empty functions for these when cfq group scheduling is not
>> defined.
>>
>> CC'ing the guilty parties to come up with a better patch that does NOT
>> involve ifdefs in cfq-iosched.c. We want blk-cgroup.[ch] fixed up.
>> And trimming the CC list a bit.
> 
> Jens, Ingo, I am sorry for this mess.
> 
> Jens,
> 
> How about introducing "block/cfq.h" and declaring additional set of wrapper
> functions to update blkiocg stats and make these do nothing if
> CFQ_GROUP_IOSCHED=n.
> 
> For example, in linux-2.6/block/cfq.h, we can define functions as follows.
> 
> #ifdef CONFIG_CFQ_GROUP_IOSCHED
> cfq_blkiocg_update_dequeue_stats () {
> 	blkiocg_update_dequeue_stats()
> }
> #else
> cfq_blkiocg_update_dequeue_stats () {}
> #endif
> 
> Fixing it blk-cgroup.[ch] might not be best as BLK_CGROUP is set.
> Secondly, if there are other IO control policies later, they might
> want to make use of BLK_CGROUP while cfq has disabled the group io 
> scheduling.

I already tried such a patch, but it's not exactly pretty. How about
splitting blk-cgroup.c into two parts, one that is built for
BLK_CGROUP and an additional one that is also built for
CFQ_GROUP_SCHED? Lets try and improve on the ifdef mess, not extend
it.

-- 
Jens Axboe

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11 19:48                   ` Vivek Goyal
  0 siblings, 0 replies; 129+ messages in thread
From: Vivek Goyal @ 2010-06-11 19:48 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Carl Worth,
	Eric Anholt, Divyesh Shah, guijianfeng,
	Linux Kernel Mailing List, Andrew Morton, Kernel Testers List

On Fri, Jun 11, 2010 at 09:11:49PM +0200, Jens Axboe wrote:
> On 11/06/10 21.07, Vivek Goyal wrote:
> > On Fri, Jun 11, 2010 at 11:18:47AM +0200, Jens Axboe wrote:
> >> On 2010-06-11 10:55, Ingo Molnar wrote:
> >>>>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
> >>>>> attached. Reproducible on that sha1 and with that config.
> >>>>
> >>>> I think I see it, the internal CFQ blkg groups are not properly
> >>>> initialized... Will send a patch shortly.
> >>>
> >>> Cool - can test it with a short turnaround, the bug is easy to reproduce.
> >>
> >> Here's a nasty patch that should fix it. Not optimal, since we really
> >> just want empty functions for these when cfq group scheduling is not
> >> defined.
> >>
> >> CC'ing the guilty parties to come up with a better patch that does NOT
> >> involve ifdefs in cfq-iosched.c. We want blk-cgroup.[ch] fixed up.
> >> And trimming the CC list a bit.
> > 
> > Jens, Ingo, I am sorry for this mess.
> > 
> > Jens,
> > 
> > How about introducing "block/cfq.h" and declaring additional set of wrapper
> > functions to update blkiocg stats and make these do nothing if
> > CFQ_GROUP_IOSCHED=n.
> > 
> > For example, in linux-2.6/block/cfq.h, we can define functions as follows.
> > 
> > #ifdef CONFIG_CFQ_GROUP_IOSCHED
> > cfq_blkiocg_update_dequeue_stats () {
> > 	blkiocg_update_dequeue_stats()
> > }
> > #else
> > cfq_blkiocg_update_dequeue_stats () {}
> > #endif
> > 
> > Fixing it blk-cgroup.[ch] might not be best as BLK_CGROUP is set.
> > Secondly, if there are other IO control policies later, they might
> > want to make use of BLK_CGROUP while cfq has disabled the group io 
> > scheduling.
> 
> I already tried such a patch, but it's not exactly pretty. How about
> splitting blk-cgroup.c into two parts, one that is built for
> BLK_CGROUP and an additional one that is also built for
> CFQ_GROUP_SCHED? Lets try and improve on the ifdef mess, not extend
> it.

Sorry, I did not understand your suggestion. Can you please throw some more
light on it.

blk-cgroup.c does not have any cfq specific parts. So I can't split it
out and build part of it based on CFQ_GROUP_SCHED.

Thanks
Vivek

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11 19:48                   ` Vivek Goyal
  0 siblings, 0 replies; 129+ messages in thread
From: Vivek Goyal @ 2010-06-11 19:48 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Carl Worth,
	Eric Anholt, Divyesh Shah, guijianfeng-BthXqXjhjHXQFUHtdCDX3A,
	Linux Kernel Mailing List, Andrew Morton, Kernel Testers List

On Fri, Jun 11, 2010 at 09:11:49PM +0200, Jens Axboe wrote:
> On 11/06/10 21.07, Vivek Goyal wrote:
> > On Fri, Jun 11, 2010 at 11:18:47AM +0200, Jens Axboe wrote:
> >> On 2010-06-11 10:55, Ingo Molnar wrote:
> >>>>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
> >>>>> attached. Reproducible on that sha1 and with that config.
> >>>>
> >>>> I think I see it, the internal CFQ blkg groups are not properly
> >>>> initialized... Will send a patch shortly.
> >>>
> >>> Cool - can test it with a short turnaround, the bug is easy to reproduce.
> >>
> >> Here's a nasty patch that should fix it. Not optimal, since we really
> >> just want empty functions for these when cfq group scheduling is not
> >> defined.
> >>
> >> CC'ing the guilty parties to come up with a better patch that does NOT
> >> involve ifdefs in cfq-iosched.c. We want blk-cgroup.[ch] fixed up.
> >> And trimming the CC list a bit.
> > 
> > Jens, Ingo, I am sorry for this mess.
> > 
> > Jens,
> > 
> > How about introducing "block/cfq.h" and declaring additional set of wrapper
> > functions to update blkiocg stats and make these do nothing if
> > CFQ_GROUP_IOSCHED=n.
> > 
> > For example, in linux-2.6/block/cfq.h, we can define functions as follows.
> > 
> > #ifdef CONFIG_CFQ_GROUP_IOSCHED
> > cfq_blkiocg_update_dequeue_stats () {
> > 	blkiocg_update_dequeue_stats()
> > }
> > #else
> > cfq_blkiocg_update_dequeue_stats () {}
> > #endif
> > 
> > Fixing it blk-cgroup.[ch] might not be best as BLK_CGROUP is set.
> > Secondly, if there are other IO control policies later, they might
> > want to make use of BLK_CGROUP while cfq has disabled the group io 
> > scheduling.
> 
> I already tried such a patch, but it's not exactly pretty. How about
> splitting blk-cgroup.c into two parts, one that is built for
> BLK_CGROUP and an additional one that is also built for
> CFQ_GROUP_SCHED? Lets try and improve on the ifdef mess, not extend
> it.

Sorry, I did not understand your suggestion. Can you please throw some more
light on it.

blk-cgroup.c does not have any cfq specific parts. So I can't split it
out and build part of it based on CFQ_GROUP_SCHED.

Thanks
Vivek

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11 19:53                     ` Jens Axboe
  0 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-11 19:53 UTC (permalink / raw)
  To: Vivek Goyal
  Cc: Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Carl Worth,
	Eric Anholt, Divyesh Shah, guijianfeng,
	Linux Kernel Mailing List, Andrew Morton, Kernel Testers List

On 11/06/10 21.48, Vivek Goyal wrote:
> On Fri, Jun 11, 2010 at 09:11:49PM +0200, Jens Axboe wrote:
>> On 11/06/10 21.07, Vivek Goyal wrote:
>>> On Fri, Jun 11, 2010 at 11:18:47AM +0200, Jens Axboe wrote:
>>>> On 2010-06-11 10:55, Ingo Molnar wrote:
>>>>>>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
>>>>>>> attached. Reproducible on that sha1 and with that config.
>>>>>>
>>>>>> I think I see it, the internal CFQ blkg groups are not properly
>>>>>> initialized... Will send a patch shortly.
>>>>>
>>>>> Cool - can test it with a short turnaround, the bug is easy to reproduce.
>>>>
>>>> Here's a nasty patch that should fix it. Not optimal, since we really
>>>> just want empty functions for these when cfq group scheduling is not
>>>> defined.
>>>>
>>>> CC'ing the guilty parties to come up with a better patch that does NOT
>>>> involve ifdefs in cfq-iosched.c. We want blk-cgroup.[ch] fixed up.
>>>> And trimming the CC list a bit.
>>>
>>> Jens, Ingo, I am sorry for this mess.
>>>
>>> Jens,
>>>
>>> How about introducing "block/cfq.h" and declaring additional set of wrapper
>>> functions to update blkiocg stats and make these do nothing if
>>> CFQ_GROUP_IOSCHED=n.
>>>
>>> For example, in linux-2.6/block/cfq.h, we can define functions as follows.
>>>
>>> #ifdef CONFIG_CFQ_GROUP_IOSCHED
>>> cfq_blkiocg_update_dequeue_stats () {
>>> 	blkiocg_update_dequeue_stats()
>>> }
>>> #else
>>> cfq_blkiocg_update_dequeue_stats () {}
>>> #endif
>>>
>>> Fixing it blk-cgroup.[ch] might not be best as BLK_CGROUP is set.
>>> Secondly, if there are other IO control policies later, they might
>>> want to make use of BLK_CGROUP while cfq has disabled the group io 
>>> scheduling.
>>
>> I already tried such a patch, but it's not exactly pretty. How about
>> splitting blk-cgroup.c into two parts, one that is built for
>> BLK_CGROUP and an additional one that is also built for
>> CFQ_GROUP_SCHED? Lets try and improve on the ifdef mess, not extend
>> it.
> 
> Sorry, I did not understand your suggestion. Can you please throw some more
> light on it.
> 
> blk-cgroup.c does not have any cfq specific parts. So I can't split it
> out and build part of it based on CFQ_GROUP_SCHED.

I know they are not cfq specific, but cfq is the only one that calls
them currently. If others depend on them later on, then let that other
blk-cgroup-iosched.o be built for them as well.

-- 
Jens Axboe


^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-11 19:53                     ` Jens Axboe
  0 siblings, 0 replies; 129+ messages in thread
From: Jens Axboe @ 2010-06-11 19:53 UTC (permalink / raw)
  To: Vivek Goyal
  Cc: Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Carl Worth,
	Eric Anholt, Divyesh Shah, guijianfeng-BthXqXjhjHXQFUHtdCDX3A,
	Linux Kernel Mailing List, Andrew Morton, Kernel Testers List

On 11/06/10 21.48, Vivek Goyal wrote:
> On Fri, Jun 11, 2010 at 09:11:49PM +0200, Jens Axboe wrote:
>> On 11/06/10 21.07, Vivek Goyal wrote:
>>> On Fri, Jun 11, 2010 at 11:18:47AM +0200, Jens Axboe wrote:
>>>> On 2010-06-11 10:55, Ingo Molnar wrote:
>>>>>>> Caused by the same blkiocg_update_io_add_stats() function. Bootlog and config 
>>>>>>> attached. Reproducible on that sha1 and with that config.
>>>>>>
>>>>>> I think I see it, the internal CFQ blkg groups are not properly
>>>>>> initialized... Will send a patch shortly.
>>>>>
>>>>> Cool - can test it with a short turnaround, the bug is easy to reproduce.
>>>>
>>>> Here's a nasty patch that should fix it. Not optimal, since we really
>>>> just want empty functions for these when cfq group scheduling is not
>>>> defined.
>>>>
>>>> CC'ing the guilty parties to come up with a better patch that does NOT
>>>> involve ifdefs in cfq-iosched.c. We want blk-cgroup.[ch] fixed up.
>>>> And trimming the CC list a bit.
>>>
>>> Jens, Ingo, I am sorry for this mess.
>>>
>>> Jens,
>>>
>>> How about introducing "block/cfq.h" and declaring additional set of wrapper
>>> functions to update blkiocg stats and make these do nothing if
>>> CFQ_GROUP_IOSCHED=n.
>>>
>>> For example, in linux-2.6/block/cfq.h, we can define functions as follows.
>>>
>>> #ifdef CONFIG_CFQ_GROUP_IOSCHED
>>> cfq_blkiocg_update_dequeue_stats () {
>>> 	blkiocg_update_dequeue_stats()
>>> }
>>> #else
>>> cfq_blkiocg_update_dequeue_stats () {}
>>> #endif
>>>
>>> Fixing it blk-cgroup.[ch] might not be best as BLK_CGROUP is set.
>>> Secondly, if there are other IO control policies later, they might
>>> want to make use of BLK_CGROUP while cfq has disabled the group io 
>>> scheduling.
>>
>> I already tried such a patch, but it's not exactly pretty. How about
>> splitting blk-cgroup.c into two parts, one that is built for
>> BLK_CGROUP and an additional one that is also built for
>> CFQ_GROUP_SCHED? Lets try and improve on the ifdef mess, not extend
>> it.
> 
> Sorry, I did not understand your suggestion. Can you please throw some more
> light on it.
> 
> blk-cgroup.c does not have any cfq specific parts. So I can't split it
> out and build part of it based on CFQ_GROUP_SCHED.

I know they are not cfq specific, but cfq is the only one that calls
them currently. If others depend on them later on, then let that other
blk-cgroup-iosched.o be built for them as well.

-- 
Jens Axboe

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-11 19:53                     ` Jens Axboe
  (?)
@ 2010-06-12 14:30                     ` Vivek Goyal
  -1 siblings, 0 replies; 129+ messages in thread
From: Vivek Goyal @ 2010-06-12 14:30 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Carl Worth,
	Eric Anholt, Divyesh Shah, guijianfeng,
	Linux Kernel Mailing List, Andrew Morton, Kernel Testers List

On Fri, Jun 11, 2010 at 09:53:06PM +0200, Jens Axboe wrote:
[..]
> >>> How about introducing "block/cfq.h" and declaring additional set of wrapper
> >>> functions to update blkiocg stats and make these do nothing if
> >>> CFQ_GROUP_IOSCHED=n.
> >>>
> >>> For example, in linux-2.6/block/cfq.h, we can define functions as follows.
> >>>
> >>> #ifdef CONFIG_CFQ_GROUP_IOSCHED
> >>> cfq_blkiocg_update_dequeue_stats () {
> >>> 	blkiocg_update_dequeue_stats()
> >>> }
> >>> #else
> >>> cfq_blkiocg_update_dequeue_stats () {}
> >>> #endif
> >>>
> >>> Fixing it blk-cgroup.[ch] might not be best as BLK_CGROUP is set.
> >>> Secondly, if there are other IO control policies later, they might
> >>> want to make use of BLK_CGROUP while cfq has disabled the group io 
> >>> scheduling.
> >>
> >> I already tried such a patch, but it's not exactly pretty. How about
> >> splitting blk-cgroup.c into two parts, one that is built for
> >> BLK_CGROUP and an additional one that is also built for
> >> CFQ_GROUP_SCHED? Lets try and improve on the ifdef mess, not extend
> >> it.
> > 
> > Sorry, I did not understand your suggestion. Can you please throw some more
> > light on it.
> > 
> > blk-cgroup.c does not have any cfq specific parts. So I can't split it
> > out and build part of it based on CFQ_GROUP_SCHED.
> 
> I know they are not cfq specific, but cfq is the only one that calls
> them currently. If others depend on them later on, then let that other
> blk-cgroup-iosched.o be built for them as well.

Hi Jens,

IIUC, you are suggesting that all the blkiocg interfaces used by CFQ, pull
these out in a separate file say, blk-cgroup-iosched.c and build this
file only if CFQ_GROUP_IOSCHED is enabled.

Two things come to mind.

- If CFQ_GROUP_IOSCHED=n, then nothing much is left in blk-cgroup.c. IOW, 
  what good a blkio controller interface is without blk-cgroup-iosched.c

- More importantly, when a new policy is implemented, then it will force
  building blk-cgroup-iosched.o (even if CFQ_GROUP_IOSCHED=n) and then
  we will be face the same issue that CFQ_GROUP_IOSCHED=n but CFQ is
  calling all the stat update functions and spin lock warning triggers.

  If we create two binaries, one for cfq and for new policy, say 
  blk-cgroup-cfq.o and blk-cgroup-dm-ioband.o, that is also not a very
  pleasant situation because many of the stats interface in these two
  binaries are common and we will be unnecessary creating two binary
  copies of same functions having different name.
	cfq_blkiocg_update_completion_stats()
	dm_ioband_blkiocg_update_completion_stats()

I am still trying to implement what you suggested. Breaking apart
blk-cgroup.c and blk-cgroup.h is making it ugly. In the mean time, I 
would request you to reconsider the providing another wrapper approach
by implementing the "cfq.h".

I am attaching a patch for that approach. I have done some basic compile
testing on it. I can do more testing on it in case you decide to change your
mind.

Thanks
Vivek


---
 block/cfq-iosched.c |   56 ++++++++++++-------------
 block/cfq.h         |  115 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 143 insertions(+), 28 deletions(-)

Index: linux-2.6/block/cfq-iosched.c
===================================================================
--- linux-2.6.orig/block/cfq-iosched.c	2010-06-12 09:11:39.548160746 -0400
+++ linux-2.6/block/cfq-iosched.c	2010-06-12 09:16:32.364816205 -0400
@@ -14,7 +14,7 @@
 #include <linux/rbtree.h>
 #include <linux/ioprio.h>
 #include <linux/blktrace_api.h>
-#include "blk-cgroup.h"
+#include "cfq.h"
 
 /*
  * tunables
@@ -879,7 +879,7 @@
 	if (!RB_EMPTY_NODE(&cfqg->rb_node))
 		cfq_rb_erase(&cfqg->rb_node, st);
 	cfqg->saved_workload_slice = 0;
-	blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
+	cfq_blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
 }
 
 static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq)
@@ -939,8 +939,8 @@
 
 	cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
 					st->min_vdisktime);
-	blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
-	blkiocg_set_start_empty_time(&cfqg->blkg);
+	cfq_blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
+	cfq_blkiocg_set_start_empty_time(&cfqg->blkg);
 }
 
 #ifdef CONFIG_CFQ_GROUP_IOSCHED
@@ -995,7 +995,7 @@
 
 	/* Add group onto cgroup list */
 	sscanf(dev_name(bdi->dev), "%u:%u", &major, &minor);
-	blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
+	cfq_blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
 					MKDEV(major, minor));
 	cfqg->weight = blkcg_get_weight(blkcg, cfqg->blkg.dev);
 
@@ -1079,7 +1079,7 @@
 		 * it from cgroup list, then it will take care of destroying
 		 * cfqg also.
 		 */
-		if (!blkiocg_del_blkio_group(&cfqg->blkg))
+		if (!cfq_blkiocg_del_blkio_group(&cfqg->blkg))
 			cfq_destroy_cfqg(cfqd, cfqg);
 	}
 }
@@ -1421,10 +1421,10 @@
 {
 	elv_rb_del(&cfqq->sort_list, rq);
 	cfqq->queued[rq_is_sync(rq)]--;
-	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
-						rq_is_sync(rq));
+	cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
+					rq_data_dir(rq), rq_is_sync(rq));
 	cfq_add_rq_rb(rq);
-	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
+	cfq_blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
 			&cfqq->cfqd->serving_group->blkg, rq_data_dir(rq),
 			rq_is_sync(rq));
 }
@@ -1482,8 +1482,8 @@
 	cfq_del_rq_rb(rq);
 
 	cfqq->cfqd->rq_queued--;
-	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
-						rq_is_sync(rq));
+	cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
+					rq_data_dir(rq), rq_is_sync(rq));
 	if (rq_is_meta(rq)) {
 		WARN_ON(!cfqq->meta_pending);
 		cfqq->meta_pending--;
@@ -1518,8 +1518,8 @@
 static void cfq_bio_merged(struct request_queue *q, struct request *req,
 				struct bio *bio)
 {
-	blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg, bio_data_dir(bio),
-					cfq_bio_sync(bio));
+	cfq_blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg,
+					bio_data_dir(bio), cfq_bio_sync(bio));
 }
 
 static void
@@ -1539,8 +1539,8 @@
 	if (cfqq->next_rq == next)
 		cfqq->next_rq = rq;
 	cfq_remove_request(next);
-	blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(next),
-					rq_is_sync(next));
+	cfq_blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg,
+					rq_data_dir(next), rq_is_sync(next));
 }
 
 static int cfq_allow_merge(struct request_queue *q, struct request *rq,
@@ -1571,7 +1571,7 @@
 static inline void cfq_del_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
 	del_timer(&cfqd->idle_slice_timer);
-	blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
+	cfq_blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
 }
 
 static void __cfq_set_active_queue(struct cfq_data *cfqd,
@@ -1580,7 +1580,7 @@
 	if (cfqq) {
 		cfq_log_cfqq(cfqd, cfqq, "set_active wl_prio:%d wl_type:%d",
 				cfqd->serving_prio, cfqd->serving_type);
-		blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
+		cfq_blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
 		cfqq->slice_start = 0;
 		cfqq->dispatch_start = jiffies;
 		cfqq->allocated_slice = 0;
@@ -1911,7 +1911,7 @@
 	sl = cfqd->cfq_slice_idle;
 
 	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
-	blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
+	cfq_blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
 	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
 }
 
@@ -1931,7 +1931,7 @@
 	elv_dispatch_sort(q, rq);
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++;
-	blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
+	cfq_blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
 					rq_data_dir(rq), rq_is_sync(rq));
 }
 
@@ -3248,7 +3248,7 @@
 				cfq_clear_cfqq_wait_request(cfqq);
 				__blk_run_queue(cfqd->queue);
 			} else {
-				blkiocg_update_idle_time_stats(
+				cfq_blkiocg_update_idle_time_stats(
 						&cfqq->cfqg->blkg);
 				cfq_mark_cfqq_must_dispatch(cfqq);
 			}
@@ -3276,7 +3276,7 @@
 	rq_set_fifo_time(rq, jiffies + cfqd->cfq_fifo_expire[rq_is_sync(rq)]);
 	list_add_tail(&rq->queuelist, &cfqq->fifo);
 	cfq_add_rq_rb(rq);
-	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
+	cfq_blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
 			&cfqd->serving_group->blkg, rq_data_dir(rq),
 			rq_is_sync(rq));
 	cfq_rq_enqueued(cfqd, cfqq, rq);
@@ -3364,9 +3364,9 @@
 	WARN_ON(!cfqq->dispatched);
 	cfqd->rq_in_driver--;
 	cfqq->dispatched--;
-	blkiocg_update_completion_stats(&cfqq->cfqg->blkg, rq_start_time_ns(rq),
-			rq_io_start_time_ns(rq), rq_data_dir(rq),
-			rq_is_sync(rq));
+	cfq_blkiocg_update_completion_stats(&cfqq->cfqg->blkg,
+			rq_start_time_ns(rq), rq_io_start_time_ns(rq),
+			rq_data_dir(rq), rq_is_sync(rq));
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]--;
 
@@ -3730,7 +3730,7 @@
 
 	cfq_put_async_queues(cfqd);
 	cfq_release_cfq_groups(cfqd);
-	blkiocg_del_blkio_group(&cfqd->root_group.blkg);
+	cfq_blkiocg_del_blkio_group(&cfqd->root_group.blkg);
 
 	spin_unlock_irq(q->queue_lock);
 
@@ -3791,15 +3791,15 @@
 	/* Give preference to root group over other groups */
 	cfqg->weight = 2*BLKIO_WEIGHT_DEFAULT;
 
-#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	/*
 	 * Take a reference to root group which we never drop. This is just
 	 * to make sure that cfq_put_cfqg() does not try to kfree root group
 	 */
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
 	atomic_set(&cfqg->ref, 1);
 	rcu_read_lock();
-	blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg, (void *)cfqd,
-					0);
+	cfq_blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg,
+					(void *)cfqd, 0);
 	rcu_read_unlock();
 #endif
 	/*
Index: linux-2.6/block/cfq.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6/block/cfq.h	2010-06-12 09:12:42.497044544 -0400
@@ -0,0 +1,115 @@
+#ifndef _CFQ_H
+#define _CFQ_H
+#include "blk-cgroup.h"
+
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+static inline void cfq_blkiocg_update_io_add_stats(struct blkio_group *blkg,
+	struct blkio_group *curr_blkg, bool direction, bool sync)
+{
+	blkiocg_update_io_add_stats(blkg, curr_blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_dequeue_stats(struct blkio_group *blkg,
+			unsigned long dequeue)
+{
+	blkiocg_update_dequeue_stats(blkg, dequeue);
+}
+
+static inline void cfq_blkiocg_update_timeslice_used(struct blkio_group *blkg,
+			unsigned long time)
+{
+	blkiocg_update_timeslice_used(blkg, time);
+}
+
+static inline void cfq_blkiocg_set_start_empty_time(struct blkio_group *blkg)
+{
+	blkiocg_set_start_empty_time(blkg);
+}
+
+static inline void cfq_blkiocg_update_io_remove_stats(struct blkio_group *blkg,
+				bool direction, bool sync)
+{
+	blkiocg_update_io_remove_stats(blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_io_merged_stats(struct blkio_group *blkg,
+		bool direction, bool sync)
+{
+	blkiocg_update_io_merged_stats(blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_idle_time_stats(struct blkio_group *blkg)
+{
+	blkiocg_update_idle_time_stats(blkg);
+}
+
+static inline void
+cfq_blkiocg_update_avg_queue_size_stats(struct blkio_group *blkg)
+{
+	blkiocg_update_avg_queue_size_stats(blkg);
+}
+
+static inline void
+cfq_blkiocg_update_set_idle_time_stats(struct blkio_group *blkg)
+{
+	blkiocg_update_set_idle_time_stats(blkg);
+}
+
+static inline void cfq_blkiocg_update_dispatch_stats(struct blkio_group *blkg,
+				uint64_t bytes, bool direction, bool sync)
+{
+	blkiocg_update_dispatch_stats(blkg, bytes, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_completion_stats(struct blkio_group *blkg, uint64_t start_time, uint64_t io_start_time, bool direction, bool sync)
+{
+	cfq_blkiocg_update_completion_stats(blkg, start_time, io_start_time,
+				direction, sync);
+}
+
+static inline void cfq_blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
+			struct blkio_group *blkg, void *key, dev_t dev) {
+	blkiocg_add_blkio_group(blkcg, blkg, key, dev);
+}
+
+static inline int cfq_blkiocg_del_blkio_group(struct blkio_group *blkg)
+{
+	return blkiocg_del_blkio_group(blkg);
+}
+
+#else /* CFQ_GROUP_IOSCHED */
+static inline void cfq_blkiocg_update_io_add_stats(struct blkio_group *blkg,
+	struct blkio_group *curr_blkg, bool direction, bool sync) {}
+
+static inline void cfq_blkiocg_update_dequeue_stats(struct blkio_group *blkg,
+			unsigned long dequeue) {}
+
+static inline void cfq_blkiocg_update_timeslice_used(struct blkio_group *blkg,
+			unsigned long time) {}
+static inline void cfq_blkiocg_set_start_empty_time(struct blkio_group *blkg) {}
+static inline void cfq_blkiocg_update_io_remove_stats(struct blkio_group *blkg,
+				bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_io_merged_stats(struct blkio_group *blkg,
+		bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_idle_time_stats(struct blkio_group *blkg)
+{
+}
+static inline void
+cfq_blkiocg_update_avg_queue_size_stats(struct blkio_group *blkg) {}
+
+static inline void
+cfq_blkiocg_update_set_idle_time_stats(struct blkio_group *blkg) {}
+
+static inline void cfq_blkiocg_update_dispatch_stats(struct blkio_group *blkg,
+				uint64_t bytes, bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_completion_stats(struct blkio_group *blkg, uint64_t start_time, uint64_t io_start_time, bool direction, bool sync) {}
+
+static inline void cfq_blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
+			struct blkio_group *blkg, void *key, dev_t dev) {}
+static inline int cfq_blkiocg_del_blkio_group(struct blkio_group *blkg)
+{
+	return 0;
+}
+
+#endif /* CFQ_GROUP_IOSCHED */
+#endif

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
  2010-06-10 10:09         ` Mikael Pettersson
  (?)
  (?)
@ 2010-06-12 16:15         ` Mikael Pettersson
  2010-06-12 18:52           ` Rafael J. Wysocki
  -1 siblings, 1 reply; 129+ messages in thread
From: Mikael Pettersson @ 2010-06-12 16:15 UTC (permalink / raw)
  To: Mikael Pettersson
  Cc: Rafael J. Wysocki, Linux Kernel Mailing List,
	Kernel Testers List, Maciej Rutecki

Mikael Pettersson writes:
 > Rafael J. Wysocki writes:
 >  > On Wednesday, June 09, 2010, Mikael Pettersson wrote:
 >  > > Rafael J. Wysocki wrote:
 >  > > > This message has been generated automatically as a part of a summary report
 >  > > > of recent regressions.
 >  > > > 
 >  > > > The following bug entry is on the current list of known regressions
 >  > > > from 2.6.34.  Please verify if it still should be listed and let the tracking team
 >  > > > know (either way).
 >  > > > 
 >  > > > 
 >  > > > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=3D16161
 >  > > > Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename =
 >  > > > ... XVR-600 related?
 >  > > > Submitter	: Mikael Pettersson <mikpe@it.uu.se>
 >  > > > Date		: 2010-06-01 19:57 (8 days old)
 >  > > > Message-ID	: <19461.26166.427857.612983@pilspetsen.it.uu.se>
 >  > > > References	: http://marc.info/?l=3Dlinux-kernel&m=3D127542227511925&w=3D2
 >  > > 
 >  > > The bug is still there in 2.6.35-rc2. I haven't checked post-rc2 git snapshots.
 >  > 
 >  > Please test post-rc2 too.
 > 
 > The bug is still there in 2.6.35-rc2-git4.

The bug appears to be gone in 2.6.35-rc3.  I don't know which
commit actually fixed it.

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
  2010-06-12 16:15         ` Mikael Pettersson
@ 2010-06-12 18:52           ` Rafael J. Wysocki
  2010-06-18 20:10               ` Jesse Barnes
  0 siblings, 1 reply; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-12 18:52 UTC (permalink / raw)
  To: Mikael Pettersson
  Cc: Linux Kernel Mailing List, Kernel Testers List, Maciej Rutecki

On Saturday, June 12, 2010, Mikael Pettersson wrote:
> Mikael Pettersson writes:
>  > Rafael J. Wysocki writes:
>  >  > On Wednesday, June 09, 2010, Mikael Pettersson wrote:
>  >  > > Rafael J. Wysocki wrote:
>  >  > > > This message has been generated automatically as a part of a summary report
>  >  > > > of recent regressions.
>  >  > > > 
>  >  > > > The following bug entry is on the current list of known regressions
>  >  > > > from 2.6.34.  Please verify if it still should be listed and let the tracking team
>  >  > > > know (either way).
>  >  > > > 
>  >  > > > 
>  >  > > > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=3D16161
>  >  > > > Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename =
>  >  > > > ... XVR-600 related?
>  >  > > > Submitter	: Mikael Pettersson <mikpe@it.uu.se>
>  >  > > > Date		: 2010-06-01 19:57 (8 days old)
>  >  > > > Message-ID	: <19461.26166.427857.612983@pilspetsen.it.uu.se>
>  >  > > > References	: http://marc.info/?l=3Dlinux-kernel&m=3D127542227511925&w=3D2
>  >  > > 
>  >  > > The bug is still there in 2.6.35-rc2. I haven't checked post-rc2 git snapshots.
>  >  > 
>  >  > Please test post-rc2 too.
>  > 
>  > The bug is still there in 2.6.35-rc2-git4.
> 
> The bug appears to be gone in 2.6.35-rc3.

Good.

> I don't know which commit actually fixed it.

Well, it would be useful information, but it's much more important it's not
there anymore.

Rafael



^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-16 20:42       ` Andrew Morton
  0 siblings, 0 replies; 129+ messages in thread
From: Andrew Morton @ 2010-06-16 20:42 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: sedat.dilek, Linux Kernel Mailing List, Maciej Rutecki,
	Linus Torvalds, Kernel Testers List, Network Development,
	Linux ACPI, Linux PM List, Linux SCSI List, Linux Wireless List,
	DRI, dmonakhov

On Wed, 9 Jun 2010 11:22:35 +0200
"Rafael J. Wysocki" <rjw@sisk.pl> wrote:

> On Wednesday 09 June 2010, Sedat Dilek wrote:
> > The patch from [1] is still missing.
> > 
> >    "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
> > Dmitry Monakhoc
> > 
> > Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
> > Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>
> > 
> > I have already reported this issue on LKML [2] and cpufreq ML [3].
> > 
> > - Sedat -
> > 
> > [1] http://www.spinics.net/lists/cpufreq/msg01631.html
> > [2] http://lkml.org/lkml/2010/5/31/77
> > [3] http://www.spinics.net/lists/cpufreq/msg01637.html
> 
> Thanks, added.

I just merged a different patch whcih should address this:


From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>

Fix

 BUG: using smp_processor_id() in preemptible [00000000] code: s2disk/3392
 caller is nr_iowait_cpu+0xe/0x1e
 Pid: 3392, comm: s2disk Not tainted 2.6.35-rc3-dbg-00106-ga75e02b #2
 Call Trace:
 [<c1184c55>] debug_smp_processor_id+0xa5/0xbc
 [<c10282a5>] nr_iowait_cpu+0xe/0x1e
 [<c104ab7c>] update_ts_time_stats+0x32/0x6c
 [<c104ac73>] get_cpu_idle_time_us+0x36/0x58
 [<c124229b>] get_cpu_idle_time+0x12/0x74
 [<c1242963>] cpufreq_governor_dbs+0xc3/0x2dc
 [<c1240437>] __cpufreq_governor+0x51/0x85
 [<c1241190>] __cpufreq_set_policy+0x10c/0x13d
 [<c12413d3>] cpufreq_add_dev_interface+0x212/0x233
 [<c1241b1e>] ? handle_update+0x0/0xd
 [<c1241a18>] cpufreq_add_dev+0x34b/0x35a
 [<c103c973>] ? schedule_delayed_work_on+0x11/0x13
 [<c12c14db>] cpufreq_cpu_callback+0x59/0x63
 [<c1042f39>] notifier_call_chain+0x26/0x48
 [<c1042f7d>] __raw_notifier_call_chain+0xe/0x10
 [<c102efb9>] __cpu_notify+0x15/0x29
 [<c102efda>] cpu_notify+0xd/0xf
 [<c12bfb30>] _cpu_up+0xaf/0xd2
 [<c12b3ad4>] enable_nonboot_cpus+0x3d/0x94
 [<c1055eef>] hibernation_snapshot+0x104/0x1a2
 [<c1058b49>] snapshot_ioctl+0x24b/0x53e
 [<c1028ad1>] ? sub_preempt_count+0x7c/0x89
 [<c10ab91d>] vfs_ioctl+0x2e/0x8c
 [<c10588fe>] ? snapshot_ioctl+0x0/0x53e
 [<c10ac2c7>] do_vfs_ioctl+0x42f/0x45a
 [<c10a0ba5>] ? fsnotify_modify+0x4f/0x5a
 [<c11e9dc3>] ? tty_write+0x0/0x1d0
 [<c10a12d6>] ? vfs_write+0xa2/0xda
 [<c10ac333>] sys_ioctl+0x41/0x62
 [<c10027d3>] sysenter_do_call+0x12/0x2d

The initial fix was to use get_cpu/put_cpu in nr_iowait_cpu.  However,
Arjan stated that "the bug is that it needs to be nr_iowait_cpu(int cpu)".

This patch introduces nr_iowait_cpu(int cpu) and changes to it callers.

akpm: addresses about 30,000,000 different bug reports.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/cpuidle/governors/menu.c |   10 ++++++++--
 include/linux/sched.h            |    2 +-
 kernel/sched.c                   |    4 ++--
 kernel/time/tick-sched.c         |    4 +++-
 4 files changed, 14 insertions(+), 6 deletions(-)

diff -puN drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu drivers/cpuidle/governors/menu.c
--- a/drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/drivers/cpuidle/governors/menu.c
@@ -137,15 +137,18 @@ static inline int which_bucket(unsigned 
 {
 	int bucket = 0;
 
+	int cpu = get_cpu();
 	/*
 	 * We keep two groups of stats; one with no
 	 * IO pending, one without.
 	 * This allows us to calculate
 	 * E(duration)|iowait
 	 */
-	if (nr_iowait_cpu())
+	if (nr_iowait_cpu(cpu))
 		bucket = BUCKETS/2;
 
+	put_cpu();
+
 	if (duration < 10)
 		return bucket;
 	if (duration < 100)
@@ -169,13 +172,16 @@ static inline int which_bucket(unsigned 
 static inline int performance_multiplier(void)
 {
 	int mult = 1;
+	int cpu = get_cpu();
 
 	/* for higher loadavg, we are more reluctant */
 
 	mult += 2 * get_loadavg();
 
 	/* for IO wait tasks (per cpu!) we add 5x each */
-	mult += 10 * nr_iowait_cpu();
+	mult += 10 * nr_iowait_cpu(cpu);
+
+	put_cpu();
 
 	return mult;
 }
diff -puN include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu include/linux/sched.h
--- a/include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/include/linux/sched.h
@@ -139,7 +139,7 @@ extern int nr_processes(void);
 extern unsigned long nr_running(void);
 extern unsigned long nr_uninterruptible(void);
 extern unsigned long nr_iowait(void);
-extern unsigned long nr_iowait_cpu(void);
+extern unsigned long nr_iowait_cpu(int cpu);
 extern unsigned long this_cpu_load(void);
 
 
diff -puN kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/sched.c
--- a/kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/kernel/sched.c
@@ -2864,9 +2864,9 @@ unsigned long nr_iowait(void)
 	return sum;
 }
 
-unsigned long nr_iowait_cpu(void)
+unsigned long nr_iowait_cpu(int cpu)
 {
-	struct rq *this = this_rq();
+	struct rq *this = cpu_rq(cpu);
 	return atomic_read(&this->nr_iowait);
 }
 
diff -puN kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/time/tick-sched.c
--- a/kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/kernel/time/tick-sched.c
@@ -159,10 +159,12 @@ update_ts_time_stats(struct tick_sched *
 	ktime_t delta;
 
 	if (ts->idle_active) {
+		int cpu = get_cpu();
 		delta = ktime_sub(now, ts->idle_entrytime);
 		ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
-		if (nr_iowait_cpu() > 0)
+		if (nr_iowait_cpu(cpu) > 0)
 			ts->iowait_sleeptime = ktime_add(ts->iowait_sleeptime, delta);
+		put_cpu();
 		ts->idle_entrytime = now;
 	}
 
_


^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-16 20:42       ` Andrew Morton
  0 siblings, 0 replies; 129+ messages in thread
From: Andrew Morton @ 2010-06-16 20:42 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: sedat.dilek-Re5JQEeQqe8AvxtiuMwx3w, Linux Kernel Mailing List,
	Maciej Rutecki, Linus Torvalds, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI, dmonakhov-GEFAQzZX7r8dnm+yROfE0A

On Wed, 9 Jun 2010 11:22:35 +0200
"Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org> wrote:

> On Wednesday 09 June 2010, Sedat Dilek wrote:
> > The patch from [1] is still missing.
> > 
> >    "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
> > Dmitry Monakhoc
> > 
> > Tested-by: Sedat Dilek <sedat.dilek-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > Tested-by Maciej Rutecki <maciej.rutecki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > 
> > I have already reported this issue on LKML [2] and cpufreq ML [3].
> > 
> > - Sedat -
> > 
> > [1] http://www.spinics.net/lists/cpufreq/msg01631.html
> > [2] http://lkml.org/lkml/2010/5/31/77
> > [3] http://www.spinics.net/lists/cpufreq/msg01637.html
> 
> Thanks, added.

I just merged a different patch whcih should address this:


From: Sergey Senozhatsky <sergey.senozhatsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Fix

 BUG: using smp_processor_id() in preemptible [00000000] code: s2disk/3392
 caller is nr_iowait_cpu+0xe/0x1e
 Pid: 3392, comm: s2disk Not tainted 2.6.35-rc3-dbg-00106-ga75e02b #2
 Call Trace:
 [<c1184c55>] debug_smp_processor_id+0xa5/0xbc
 [<c10282a5>] nr_iowait_cpu+0xe/0x1e
 [<c104ab7c>] update_ts_time_stats+0x32/0x6c
 [<c104ac73>] get_cpu_idle_time_us+0x36/0x58
 [<c124229b>] get_cpu_idle_time+0x12/0x74
 [<c1242963>] cpufreq_governor_dbs+0xc3/0x2dc
 [<c1240437>] __cpufreq_governor+0x51/0x85
 [<c1241190>] __cpufreq_set_policy+0x10c/0x13d
 [<c12413d3>] cpufreq_add_dev_interface+0x212/0x233
 [<c1241b1e>] ? handle_update+0x0/0xd
 [<c1241a18>] cpufreq_add_dev+0x34b/0x35a
 [<c103c973>] ? schedule_delayed_work_on+0x11/0x13
 [<c12c14db>] cpufreq_cpu_callback+0x59/0x63
 [<c1042f39>] notifier_call_chain+0x26/0x48
 [<c1042f7d>] __raw_notifier_call_chain+0xe/0x10
 [<c102efb9>] __cpu_notify+0x15/0x29
 [<c102efda>] cpu_notify+0xd/0xf
 [<c12bfb30>] _cpu_up+0xaf/0xd2
 [<c12b3ad4>] enable_nonboot_cpus+0x3d/0x94
 [<c1055eef>] hibernation_snapshot+0x104/0x1a2
 [<c1058b49>] snapshot_ioctl+0x24b/0x53e
 [<c1028ad1>] ? sub_preempt_count+0x7c/0x89
 [<c10ab91d>] vfs_ioctl+0x2e/0x8c
 [<c10588fe>] ? snapshot_ioctl+0x0/0x53e
 [<c10ac2c7>] do_vfs_ioctl+0x42f/0x45a
 [<c10a0ba5>] ? fsnotify_modify+0x4f/0x5a
 [<c11e9dc3>] ? tty_write+0x0/0x1d0
 [<c10a12d6>] ? vfs_write+0xa2/0xda
 [<c10ac333>] sys_ioctl+0x41/0x62
 [<c10027d3>] sysenter_do_call+0x12/0x2d

The initial fix was to use get_cpu/put_cpu in nr_iowait_cpu.  However,
Arjan stated that "the bug is that it needs to be nr_iowait_cpu(int cpu)".

This patch introduces nr_iowait_cpu(int cpu) and changes to it callers.

akpm: addresses about 30,000,000 different bug reports.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Arjan van de Ven <arjan-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Cc: "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org>
Cc: Maxim Levitsky <maximlevitsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>
Cc: Jiri Slaby <jslaby-AlSwsSmVLrQ@public.gmane.org>
Signed-off-by: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
---

 drivers/cpuidle/governors/menu.c |   10 ++++++++--
 include/linux/sched.h            |    2 +-
 kernel/sched.c                   |    4 ++--
 kernel/time/tick-sched.c         |    4 +++-
 4 files changed, 14 insertions(+), 6 deletions(-)

diff -puN drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu drivers/cpuidle/governors/menu.c
--- a/drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/drivers/cpuidle/governors/menu.c
@@ -137,15 +137,18 @@ static inline int which_bucket(unsigned 
 {
 	int bucket = 0;
 
+	int cpu = get_cpu();
 	/*
 	 * We keep two groups of stats; one with no
 	 * IO pending, one without.
 	 * This allows us to calculate
 	 * E(duration)|iowait
 	 */
-	if (nr_iowait_cpu())
+	if (nr_iowait_cpu(cpu))
 		bucket = BUCKETS/2;
 
+	put_cpu();
+
 	if (duration < 10)
 		return bucket;
 	if (duration < 100)
@@ -169,13 +172,16 @@ static inline int which_bucket(unsigned 
 static inline int performance_multiplier(void)
 {
 	int mult = 1;
+	int cpu = get_cpu();
 
 	/* for higher loadavg, we are more reluctant */
 
 	mult += 2 * get_loadavg();
 
 	/* for IO wait tasks (per cpu!) we add 5x each */
-	mult += 10 * nr_iowait_cpu();
+	mult += 10 * nr_iowait_cpu(cpu);
+
+	put_cpu();
 
 	return mult;
 }
diff -puN include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu include/linux/sched.h
--- a/include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/include/linux/sched.h
@@ -139,7 +139,7 @@ extern int nr_processes(void);
 extern unsigned long nr_running(void);
 extern unsigned long nr_uninterruptible(void);
 extern unsigned long nr_iowait(void);
-extern unsigned long nr_iowait_cpu(void);
+extern unsigned long nr_iowait_cpu(int cpu);
 extern unsigned long this_cpu_load(void);
 
 
diff -puN kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/sched.c
--- a/kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/kernel/sched.c
@@ -2864,9 +2864,9 @@ unsigned long nr_iowait(void)
 	return sum;
 }
 
-unsigned long nr_iowait_cpu(void)
+unsigned long nr_iowait_cpu(int cpu)
 {
-	struct rq *this = this_rq();
+	struct rq *this = cpu_rq(cpu);
 	return atomic_read(&this->nr_iowait);
 }
 
diff -puN kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/time/tick-sched.c
--- a/kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/kernel/time/tick-sched.c
@@ -159,10 +159,12 @@ update_ts_time_stats(struct tick_sched *
 	ktime_t delta;
 
 	if (ts->idle_active) {
+		int cpu = get_cpu();
 		delta = ktime_sub(now, ts->idle_entrytime);
 		ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
-		if (nr_iowait_cpu() > 0)
+		if (nr_iowait_cpu(cpu) > 0)
 			ts->iowait_sleeptime = ktime_add(ts->iowait_sleeptime, delta);
+		put_cpu();
 		ts->idle_entrytime = now;
 	}
 
_

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  9:22     ` Rafael J. Wysocki
  (?)
  (?)
@ 2010-06-16 20:42     ` Andrew Morton
  -1 siblings, 0 replies; 129+ messages in thread
From: Andrew Morton @ 2010-06-16 20:42 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, dmonakhov, Linux,
	sedat.dilek, List, Kernel Testers List, Linus Torvalds,
	Maciej Rutecki

On Wed, 9 Jun 2010 11:22:35 +0200
"Rafael J. Wysocki" <rjw@sisk.pl> wrote:

> On Wednesday 09 June 2010, Sedat Dilek wrote:
> > The patch from [1] is still missing.
> > 
> >    "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
> > Dmitry Monakhoc
> > 
> > Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
> > Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>
> > 
> > I have already reported this issue on LKML [2] and cpufreq ML [3].
> > 
> > - Sedat -
> > 
> > [1] http://www.spinics.net/lists/cpufreq/msg01631.html
> > [2] http://lkml.org/lkml/2010/5/31/77
> > [3] http://www.spinics.net/lists/cpufreq/msg01637.html
> 
> Thanks, added.

I just merged a different patch whcih should address this:


From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>

Fix

 BUG: using smp_processor_id() in preemptible [00000000] code: s2disk/3392
 caller is nr_iowait_cpu+0xe/0x1e
 Pid: 3392, comm: s2disk Not tainted 2.6.35-rc3-dbg-00106-ga75e02b #2
 Call Trace:
 [<c1184c55>] debug_smp_processor_id+0xa5/0xbc
 [<c10282a5>] nr_iowait_cpu+0xe/0x1e
 [<c104ab7c>] update_ts_time_stats+0x32/0x6c
 [<c104ac73>] get_cpu_idle_time_us+0x36/0x58
 [<c124229b>] get_cpu_idle_time+0x12/0x74
 [<c1242963>] cpufreq_governor_dbs+0xc3/0x2dc
 [<c1240437>] __cpufreq_governor+0x51/0x85
 [<c1241190>] __cpufreq_set_policy+0x10c/0x13d
 [<c12413d3>] cpufreq_add_dev_interface+0x212/0x233
 [<c1241b1e>] ? handle_update+0x0/0xd
 [<c1241a18>] cpufreq_add_dev+0x34b/0x35a
 [<c103c973>] ? schedule_delayed_work_on+0x11/0x13
 [<c12c14db>] cpufreq_cpu_callback+0x59/0x63
 [<c1042f39>] notifier_call_chain+0x26/0x48
 [<c1042f7d>] __raw_notifier_call_chain+0xe/0x10
 [<c102efb9>] __cpu_notify+0x15/0x29
 [<c102efda>] cpu_notify+0xd/0xf
 [<c12bfb30>] _cpu_up+0xaf/0xd2
 [<c12b3ad4>] enable_nonboot_cpus+0x3d/0x94
 [<c1055eef>] hibernation_snapshot+0x104/0x1a2
 [<c1058b49>] snapshot_ioctl+0x24b/0x53e
 [<c1028ad1>] ? sub_preempt_count+0x7c/0x89
 [<c10ab91d>] vfs_ioctl+0x2e/0x8c
 [<c10588fe>] ? snapshot_ioctl+0x0/0x53e
 [<c10ac2c7>] do_vfs_ioctl+0x42f/0x45a
 [<c10a0ba5>] ? fsnotify_modify+0x4f/0x5a
 [<c11e9dc3>] ? tty_write+0x0/0x1d0
 [<c10a12d6>] ? vfs_write+0xa2/0xda
 [<c10ac333>] sys_ioctl+0x41/0x62
 [<c10027d3>] sysenter_do_call+0x12/0x2d

The initial fix was to use get_cpu/put_cpu in nr_iowait_cpu.  However,
Arjan stated that "the bug is that it needs to be nr_iowait_cpu(int cpu)".

This patch introduces nr_iowait_cpu(int cpu) and changes to it callers.

akpm: addresses about 30,000,000 different bug reports.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/cpuidle/governors/menu.c |   10 ++++++++--
 include/linux/sched.h            |    2 +-
 kernel/sched.c                   |    4 ++--
 kernel/time/tick-sched.c         |    4 +++-
 4 files changed, 14 insertions(+), 6 deletions(-)

diff -puN drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu drivers/cpuidle/governors/menu.c
--- a/drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/drivers/cpuidle/governors/menu.c
@@ -137,15 +137,18 @@ static inline int which_bucket(unsigned 
 {
 	int bucket = 0;
 
+	int cpu = get_cpu();
 	/*
 	 * We keep two groups of stats; one with no
 	 * IO pending, one without.
 	 * This allows us to calculate
 	 * E(duration)|iowait
 	 */
-	if (nr_iowait_cpu())
+	if (nr_iowait_cpu(cpu))
 		bucket = BUCKETS/2;
 
+	put_cpu();
+
 	if (duration < 10)
 		return bucket;
 	if (duration < 100)
@@ -169,13 +172,16 @@ static inline int which_bucket(unsigned 
 static inline int performance_multiplier(void)
 {
 	int mult = 1;
+	int cpu = get_cpu();
 
 	/* for higher loadavg, we are more reluctant */
 
 	mult += 2 * get_loadavg();
 
 	/* for IO wait tasks (per cpu!) we add 5x each */
-	mult += 10 * nr_iowait_cpu();
+	mult += 10 * nr_iowait_cpu(cpu);
+
+	put_cpu();
 
 	return mult;
 }
diff -puN include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu include/linux/sched.h
--- a/include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/include/linux/sched.h
@@ -139,7 +139,7 @@ extern int nr_processes(void);
 extern unsigned long nr_running(void);
 extern unsigned long nr_uninterruptible(void);
 extern unsigned long nr_iowait(void);
-extern unsigned long nr_iowait_cpu(void);
+extern unsigned long nr_iowait_cpu(int cpu);
 extern unsigned long this_cpu_load(void);
 
 
diff -puN kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/sched.c
--- a/kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/kernel/sched.c
@@ -2864,9 +2864,9 @@ unsigned long nr_iowait(void)
 	return sum;
 }
 
-unsigned long nr_iowait_cpu(void)
+unsigned long nr_iowait_cpu(int cpu)
 {
-	struct rq *this = this_rq();
+	struct rq *this = cpu_rq(cpu);
 	return atomic_read(&this->nr_iowait);
 }
 
diff -puN kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/time/tick-sched.c
--- a/kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/kernel/time/tick-sched.c
@@ -159,10 +159,12 @@ update_ts_time_stats(struct tick_sched *
 	ktime_t delta;
 
 	if (ts->idle_active) {
+		int cpu = get_cpu();
 		delta = ktime_sub(now, ts->idle_entrytime);
 		ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
-		if (nr_iowait_cpu() > 0)
+		if (nr_iowait_cpu(cpu) > 0)
 			ts->iowait_sleeptime = ktime_add(ts->iowait_sleeptime, delta);
+		put_cpu();
 		ts->idle_entrytime = now;
 	}
 
_

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-09  9:22     ` Rafael J. Wysocki
  (?)
@ 2010-06-16 20:42     ` Andrew Morton
  -1 siblings, 0 replies; 129+ messages in thread
From: Andrew Morton @ 2010-06-16 20:42 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, dmonakhov, sedat.dilek,
	List, Kernel Testers List, Linus Torvalds, Maciej Rutecki

On Wed, 9 Jun 2010 11:22:35 +0200
"Rafael J. Wysocki" <rjw@sisk.pl> wrote:

> On Wednesday 09 June 2010, Sedat Dilek wrote:
> > The patch from [1] is still missing.
> > 
> >    "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
> > Dmitry Monakhoc
> > 
> > Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
> > Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>
> > 
> > I have already reported this issue on LKML [2] and cpufreq ML [3].
> > 
> > - Sedat -
> > 
> > [1] http://www.spinics.net/lists/cpufreq/msg01631.html
> > [2] http://lkml.org/lkml/2010/5/31/77
> > [3] http://www.spinics.net/lists/cpufreq/msg01637.html
> 
> Thanks, added.

I just merged a different patch whcih should address this:


From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>

Fix

 BUG: using smp_processor_id() in preemptible [00000000] code: s2disk/3392
 caller is nr_iowait_cpu+0xe/0x1e
 Pid: 3392, comm: s2disk Not tainted 2.6.35-rc3-dbg-00106-ga75e02b #2
 Call Trace:
 [<c1184c55>] debug_smp_processor_id+0xa5/0xbc
 [<c10282a5>] nr_iowait_cpu+0xe/0x1e
 [<c104ab7c>] update_ts_time_stats+0x32/0x6c
 [<c104ac73>] get_cpu_idle_time_us+0x36/0x58
 [<c124229b>] get_cpu_idle_time+0x12/0x74
 [<c1242963>] cpufreq_governor_dbs+0xc3/0x2dc
 [<c1240437>] __cpufreq_governor+0x51/0x85
 [<c1241190>] __cpufreq_set_policy+0x10c/0x13d
 [<c12413d3>] cpufreq_add_dev_interface+0x212/0x233
 [<c1241b1e>] ? handle_update+0x0/0xd
 [<c1241a18>] cpufreq_add_dev+0x34b/0x35a
 [<c103c973>] ? schedule_delayed_work_on+0x11/0x13
 [<c12c14db>] cpufreq_cpu_callback+0x59/0x63
 [<c1042f39>] notifier_call_chain+0x26/0x48
 [<c1042f7d>] __raw_notifier_call_chain+0xe/0x10
 [<c102efb9>] __cpu_notify+0x15/0x29
 [<c102efda>] cpu_notify+0xd/0xf
 [<c12bfb30>] _cpu_up+0xaf/0xd2
 [<c12b3ad4>] enable_nonboot_cpus+0x3d/0x94
 [<c1055eef>] hibernation_snapshot+0x104/0x1a2
 [<c1058b49>] snapshot_ioctl+0x24b/0x53e
 [<c1028ad1>] ? sub_preempt_count+0x7c/0x89
 [<c10ab91d>] vfs_ioctl+0x2e/0x8c
 [<c10588fe>] ? snapshot_ioctl+0x0/0x53e
 [<c10ac2c7>] do_vfs_ioctl+0x42f/0x45a
 [<c10a0ba5>] ? fsnotify_modify+0x4f/0x5a
 [<c11e9dc3>] ? tty_write+0x0/0x1d0
 [<c10a12d6>] ? vfs_write+0xa2/0xda
 [<c10ac333>] sys_ioctl+0x41/0x62
 [<c10027d3>] sysenter_do_call+0x12/0x2d

The initial fix was to use get_cpu/put_cpu in nr_iowait_cpu.  However,
Arjan stated that "the bug is that it needs to be nr_iowait_cpu(int cpu)".

This patch introduces nr_iowait_cpu(int cpu) and changes to it callers.

akpm: addresses about 30,000,000 different bug reports.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/cpuidle/governors/menu.c |   10 ++++++++--
 include/linux/sched.h            |    2 +-
 kernel/sched.c                   |    4 ++--
 kernel/time/tick-sched.c         |    4 +++-
 4 files changed, 14 insertions(+), 6 deletions(-)

diff -puN drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu drivers/cpuidle/governors/menu.c
--- a/drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/drivers/cpuidle/governors/menu.c
@@ -137,15 +137,18 @@ static inline int which_bucket(unsigned 
 {
 	int bucket = 0;
 
+	int cpu = get_cpu();
 	/*
 	 * We keep two groups of stats; one with no
 	 * IO pending, one without.
 	 * This allows us to calculate
 	 * E(duration)|iowait
 	 */
-	if (nr_iowait_cpu())
+	if (nr_iowait_cpu(cpu))
 		bucket = BUCKETS/2;
 
+	put_cpu();
+
 	if (duration < 10)
 		return bucket;
 	if (duration < 100)
@@ -169,13 +172,16 @@ static inline int which_bucket(unsigned 
 static inline int performance_multiplier(void)
 {
 	int mult = 1;
+	int cpu = get_cpu();
 
 	/* for higher loadavg, we are more reluctant */
 
 	mult += 2 * get_loadavg();
 
 	/* for IO wait tasks (per cpu!) we add 5x each */
-	mult += 10 * nr_iowait_cpu();
+	mult += 10 * nr_iowait_cpu(cpu);
+
+	put_cpu();
 
 	return mult;
 }
diff -puN include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu include/linux/sched.h
--- a/include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/include/linux/sched.h
@@ -139,7 +139,7 @@ extern int nr_processes(void);
 extern unsigned long nr_running(void);
 extern unsigned long nr_uninterruptible(void);
 extern unsigned long nr_iowait(void);
-extern unsigned long nr_iowait_cpu(void);
+extern unsigned long nr_iowait_cpu(int cpu);
 extern unsigned long this_cpu_load(void);
 
 
diff -puN kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/sched.c
--- a/kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/kernel/sched.c
@@ -2864,9 +2864,9 @@ unsigned long nr_iowait(void)
 	return sum;
 }
 
-unsigned long nr_iowait_cpu(void)
+unsigned long nr_iowait_cpu(int cpu)
 {
-	struct rq *this = this_rq();
+	struct rq *this = cpu_rq(cpu);
 	return atomic_read(&this->nr_iowait);
 }
 
diff -puN kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/time/tick-sched.c
--- a/kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
+++ a/kernel/time/tick-sched.c
@@ -159,10 +159,12 @@ update_ts_time_stats(struct tick_sched *
 	ktime_t delta;
 
 	if (ts->idle_active) {
+		int cpu = get_cpu();
 		delta = ktime_sub(now, ts->idle_entrytime);
 		ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
-		if (nr_iowait_cpu() > 0)
+		if (nr_iowait_cpu(cpu) > 0)
 			ts->iowait_sleeptime = ktime_add(ts->iowait_sleeptime, delta);
+		put_cpu();
 		ts->idle_entrytime = now;
 	}
 
_


------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-16 21:00         ` Sedat Dilek
  0 siblings, 0 replies; 129+ messages in thread
From: Sedat Dilek @ 2010-06-16 21:00 UTC (permalink / raw)
  To: Andrew Morton
  Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Maciej Rutecki,
	Linus Torvalds, Kernel Testers List, Network Development,
	Linux ACPI, Linux PM List, Linux SCSI List, Linux Wireless List,
	DRI, dmonakhov

How do cpu-freq related stuff find its way into mainline?
Is there a GIT repository/branch on <git.kernel.org> where you can pull from?

- Sedat -

On Wed, Jun 16, 2010 at 10:42 PM, Andrew Morton
<akpm@linux-foundation.org> wrote:
> On Wed, 9 Jun 2010 11:22:35 +0200
> "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
>
>> On Wednesday 09 June 2010, Sedat Dilek wrote:
>> > The patch from [1] is still missing.
>> >
>> >    "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
>> > Dmitry Monakhoc
>> >
>> > Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
>> > Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>
>> >
>> > I have already reported this issue on LKML [2] and cpufreq ML [3].
>> >
>> > - Sedat -
>> >
>> > [1] http://www.spinics.net/lists/cpufreq/msg01631.html
>> > [2] http://lkml.org/lkml/2010/5/31/77
>> > [3] http://www.spinics.net/lists/cpufreq/msg01637.html
>>
>> Thanks, added.
>
> I just merged a different patch whcih should address this:
>
>
> From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
>
> Fix
>
>  BUG: using smp_processor_id() in preemptible [00000000] code: s2disk/3392
>  caller is nr_iowait_cpu+0xe/0x1e
>  Pid: 3392, comm: s2disk Not tainted 2.6.35-rc3-dbg-00106-ga75e02b #2
>  Call Trace:
>  [<c1184c55>] debug_smp_processor_id+0xa5/0xbc
>  [<c10282a5>] nr_iowait_cpu+0xe/0x1e
>  [<c104ab7c>] update_ts_time_stats+0x32/0x6c
>  [<c104ac73>] get_cpu_idle_time_us+0x36/0x58
>  [<c124229b>] get_cpu_idle_time+0x12/0x74
>  [<c1242963>] cpufreq_governor_dbs+0xc3/0x2dc
>  [<c1240437>] __cpufreq_governor+0x51/0x85
>  [<c1241190>] __cpufreq_set_policy+0x10c/0x13d
>  [<c12413d3>] cpufreq_add_dev_interface+0x212/0x233
>  [<c1241b1e>] ? handle_update+0x0/0xd
>  [<c1241a18>] cpufreq_add_dev+0x34b/0x35a
>  [<c103c973>] ? schedule_delayed_work_on+0x11/0x13
>  [<c12c14db>] cpufreq_cpu_callback+0x59/0x63
>  [<c1042f39>] notifier_call_chain+0x26/0x48
>  [<c1042f7d>] __raw_notifier_call_chain+0xe/0x10
>  [<c102efb9>] __cpu_notify+0x15/0x29
>  [<c102efda>] cpu_notify+0xd/0xf
>  [<c12bfb30>] _cpu_up+0xaf/0xd2
>  [<c12b3ad4>] enable_nonboot_cpus+0x3d/0x94
>  [<c1055eef>] hibernation_snapshot+0x104/0x1a2
>  [<c1058b49>] snapshot_ioctl+0x24b/0x53e
>  [<c1028ad1>] ? sub_preempt_count+0x7c/0x89
>  [<c10ab91d>] vfs_ioctl+0x2e/0x8c
>  [<c10588fe>] ? snapshot_ioctl+0x0/0x53e
>  [<c10ac2c7>] do_vfs_ioctl+0x42f/0x45a
>  [<c10a0ba5>] ? fsnotify_modify+0x4f/0x5a
>  [<c11e9dc3>] ? tty_write+0x0/0x1d0
>  [<c10a12d6>] ? vfs_write+0xa2/0xda
>  [<c10ac333>] sys_ioctl+0x41/0x62
>  [<c10027d3>] sysenter_do_call+0x12/0x2d
>
> The initial fix was to use get_cpu/put_cpu in nr_iowait_cpu.  However,
> Arjan stated that "the bug is that it needs to be nr_iowait_cpu(int cpu)".
>
> This patch introduces nr_iowait_cpu(int cpu) and changes to it callers.
>
> akpm: addresses about 30,000,000 different bug reports.
>
> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
> Cc: Arjan van de Ven <arjan@infradead.org>
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: Maxim Levitsky <maximlevitsky@gmail.com>
> Cc: Len Brown <len.brown@intel.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Jiri Slaby <jslaby@suse.cz>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
>
>  drivers/cpuidle/governors/menu.c |   10 ++++++++--
>  include/linux/sched.h            |    2 +-
>  kernel/sched.c                   |    4 ++--
>  kernel/time/tick-sched.c         |    4 +++-
>  4 files changed, 14 insertions(+), 6 deletions(-)
>
> diff -puN drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu drivers/cpuidle/governors/menu.c
> --- a/drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/drivers/cpuidle/governors/menu.c
> @@ -137,15 +137,18 @@ static inline int which_bucket(unsigned
>  {
>        int bucket = 0;
>
> +       int cpu = get_cpu();
>        /*
>         * We keep two groups of stats; one with no
>         * IO pending, one without.
>         * This allows us to calculate
>         * E(duration)|iowait
>         */
> -       if (nr_iowait_cpu())
> +       if (nr_iowait_cpu(cpu))
>                bucket = BUCKETS/2;
>
> +       put_cpu();
> +
>        if (duration < 10)
>                return bucket;
>        if (duration < 100)
> @@ -169,13 +172,16 @@ static inline int which_bucket(unsigned
>  static inline int performance_multiplier(void)
>  {
>        int mult = 1;
> +       int cpu = get_cpu();
>
>        /* for higher loadavg, we are more reluctant */
>
>        mult += 2 * get_loadavg();
>
>        /* for IO wait tasks (per cpu!) we add 5x each */
> -       mult += 10 * nr_iowait_cpu();
> +       mult += 10 * nr_iowait_cpu(cpu);
> +
> +       put_cpu();
>
>        return mult;
>  }
> diff -puN include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu include/linux/sched.h
> --- a/include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/include/linux/sched.h
> @@ -139,7 +139,7 @@ extern int nr_processes(void);
>  extern unsigned long nr_running(void);
>  extern unsigned long nr_uninterruptible(void);
>  extern unsigned long nr_iowait(void);
> -extern unsigned long nr_iowait_cpu(void);
> +extern unsigned long nr_iowait_cpu(int cpu);
>  extern unsigned long this_cpu_load(void);
>
>
> diff -puN kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/sched.c
> --- a/kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/kernel/sched.c
> @@ -2864,9 +2864,9 @@ unsigned long nr_iowait(void)
>        return sum;
>  }
>
> -unsigned long nr_iowait_cpu(void)
> +unsigned long nr_iowait_cpu(int cpu)
>  {
> -       struct rq *this = this_rq();
> +       struct rq *this = cpu_rq(cpu);
>        return atomic_read(&this->nr_iowait);
>  }
>
> diff -puN kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/time/tick-sched.c
> --- a/kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/kernel/time/tick-sched.c
> @@ -159,10 +159,12 @@ update_ts_time_stats(struct tick_sched *
>        ktime_t delta;
>
>        if (ts->idle_active) {
> +               int cpu = get_cpu();
>                delta = ktime_sub(now, ts->idle_entrytime);
>                ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
> -               if (nr_iowait_cpu() > 0)
> +               if (nr_iowait_cpu(cpu) > 0)
>                        ts->iowait_sleeptime = ktime_add(ts->iowait_sleeptime, delta);
> +               put_cpu();
>                ts->idle_entrytime = now;
>        }
>
> _
>
>

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
@ 2010-06-16 21:00         ` Sedat Dilek
  0 siblings, 0 replies; 129+ messages in thread
From: Sedat Dilek @ 2010-06-16 21:00 UTC (permalink / raw)
  To: Andrew Morton
  Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Maciej Rutecki,
	Linus Torvalds, Kernel Testers List, Network Development,
	Linux ACPI, Linux PM List, Linux SCSI List, Linux Wireless List,
	DRI, dmonakhov-GEFAQzZX7r8dnm+yROfE0A

How do cpu-freq related stuff find its way into mainline?
Is there a GIT repository/branch on <git.kernel.org> where you can pull from?

- Sedat -

On Wed, Jun 16, 2010 at 10:42 PM, Andrew Morton
<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote:
> On Wed, 9 Jun 2010 11:22:35 +0200
> "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
>
>> On Wednesday 09 June 2010, Sedat Dilek wrote:
>> > The patch from [1] is still missing.
>> >
>> >    "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
>> > Dmitry Monakhoc
>> >
>> > Tested-by: Sedat Dilek <sedat.dilek-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> > Tested-by Maciej Rutecki <maciej.rutecki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> >
>> > I have already reported this issue on LKML [2] and cpufreq ML [3].
>> >
>> > - Sedat -
>> >
>> > [1] http://www.spinics.net/lists/cpufreq/msg01631.html
>> > [2] http://lkml.org/lkml/2010/5/31/77
>> > [3] http://www.spinics.net/lists/cpufreq/msg01637.html
>>
>> Thanks, added.
>
> I just merged a different patch whcih should address this:
>
>
> From: Sergey Senozhatsky <sergey.senozhatsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> Fix
>
>  BUG: using smp_processor_id() in preemptible [00000000] code: s2disk/3392
>  caller is nr_iowait_cpu+0xe/0x1e
>  Pid: 3392, comm: s2disk Not tainted 2.6.35-rc3-dbg-00106-ga75e02b #2
>  Call Trace:
>  [<c1184c55>] debug_smp_processor_id+0xa5/0xbc
>  [<c10282a5>] nr_iowait_cpu+0xe/0x1e
>  [<c104ab7c>] update_ts_time_stats+0x32/0x6c
>  [<c104ac73>] get_cpu_idle_time_us+0x36/0x58
>  [<c124229b>] get_cpu_idle_time+0x12/0x74
>  [<c1242963>] cpufreq_governor_dbs+0xc3/0x2dc
>  [<c1240437>] __cpufreq_governor+0x51/0x85
>  [<c1241190>] __cpufreq_set_policy+0x10c/0x13d
>  [<c12413d3>] cpufreq_add_dev_interface+0x212/0x233
>  [<c1241b1e>] ? handle_update+0x0/0xd
>  [<c1241a18>] cpufreq_add_dev+0x34b/0x35a
>  [<c103c973>] ? schedule_delayed_work_on+0x11/0x13
>  [<c12c14db>] cpufreq_cpu_callback+0x59/0x63
>  [<c1042f39>] notifier_call_chain+0x26/0x48
>  [<c1042f7d>] __raw_notifier_call_chain+0xe/0x10
>  [<c102efb9>] __cpu_notify+0x15/0x29
>  [<c102efda>] cpu_notify+0xd/0xf
>  [<c12bfb30>] _cpu_up+0xaf/0xd2
>  [<c12b3ad4>] enable_nonboot_cpus+0x3d/0x94
>  [<c1055eef>] hibernation_snapshot+0x104/0x1a2
>  [<c1058b49>] snapshot_ioctl+0x24b/0x53e
>  [<c1028ad1>] ? sub_preempt_count+0x7c/0x89
>  [<c10ab91d>] vfs_ioctl+0x2e/0x8c
>  [<c10588fe>] ? snapshot_ioctl+0x0/0x53e
>  [<c10ac2c7>] do_vfs_ioctl+0x42f/0x45a
>  [<c10a0ba5>] ? fsnotify_modify+0x4f/0x5a
>  [<c11e9dc3>] ? tty_write+0x0/0x1d0
>  [<c10a12d6>] ? vfs_write+0xa2/0xda
>  [<c10ac333>] sys_ioctl+0x41/0x62
>  [<c10027d3>] sysenter_do_call+0x12/0x2d
>
> The initial fix was to use get_cpu/put_cpu in nr_iowait_cpu.  However,
> Arjan stated that "the bug is that it needs to be nr_iowait_cpu(int cpu)".
>
> This patch introduces nr_iowait_cpu(int cpu) and changes to it callers.
>
> akpm: addresses about 30,000,000 different bug reports.
>
> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Arjan van de Ven <arjan-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
> Cc: "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org>
> Cc: Maxim Levitsky <maximlevitsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> Cc: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>
> Cc: Jiri Slaby <jslaby-AlSwsSmVLrQ@public.gmane.org>
> Signed-off-by: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
> ---
>
>  drivers/cpuidle/governors/menu.c |   10 ++++++++--
>  include/linux/sched.h            |    2 +-
>  kernel/sched.c                   |    4 ++--
>  kernel/time/tick-sched.c         |    4 +++-
>  4 files changed, 14 insertions(+), 6 deletions(-)
>
> diff -puN drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu drivers/cpuidle/governors/menu.c
> --- a/drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/drivers/cpuidle/governors/menu.c
> @@ -137,15 +137,18 @@ static inline int which_bucket(unsigned
>  {
>        int bucket = 0;
>
> +       int cpu = get_cpu();
>        /*
>         * We keep two groups of stats; one with no
>         * IO pending, one without.
>         * This allows us to calculate
>         * E(duration)|iowait
>         */
> -       if (nr_iowait_cpu())
> +       if (nr_iowait_cpu(cpu))
>                bucket = BUCKETS/2;
>
> +       put_cpu();
> +
>        if (duration < 10)
>                return bucket;
>        if (duration < 100)
> @@ -169,13 +172,16 @@ static inline int which_bucket(unsigned
>  static inline int performance_multiplier(void)
>  {
>        int mult = 1;
> +       int cpu = get_cpu();
>
>        /* for higher loadavg, we are more reluctant */
>
>        mult += 2 * get_loadavg();
>
>        /* for IO wait tasks (per cpu!) we add 5x each */
> -       mult += 10 * nr_iowait_cpu();
> +       mult += 10 * nr_iowait_cpu(cpu);
> +
> +       put_cpu();
>
>        return mult;
>  }
> diff -puN include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu include/linux/sched.h
> --- a/include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/include/linux/sched.h
> @@ -139,7 +139,7 @@ extern int nr_processes(void);
>  extern unsigned long nr_running(void);
>  extern unsigned long nr_uninterruptible(void);
>  extern unsigned long nr_iowait(void);
> -extern unsigned long nr_iowait_cpu(void);
> +extern unsigned long nr_iowait_cpu(int cpu);
>  extern unsigned long this_cpu_load(void);
>
>
> diff -puN kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/sched.c
> --- a/kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/kernel/sched.c
> @@ -2864,9 +2864,9 @@ unsigned long nr_iowait(void)
>        return sum;
>  }
>
> -unsigned long nr_iowait_cpu(void)
> +unsigned long nr_iowait_cpu(int cpu)
>  {
> -       struct rq *this = this_rq();
> +       struct rq *this = cpu_rq(cpu);
>        return atomic_read(&this->nr_iowait);
>  }
>
> diff -puN kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/time/tick-sched.c
> --- a/kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/kernel/time/tick-sched.c
> @@ -159,10 +159,12 @@ update_ts_time_stats(struct tick_sched *
>        ktime_t delta;
>
>        if (ts->idle_active) {
> +               int cpu = get_cpu();
>                delta = ktime_sub(now, ts->idle_entrytime);
>                ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
> -               if (nr_iowait_cpu() > 0)
> +               if (nr_iowait_cpu(cpu) > 0)
>                        ts->iowait_sleeptime = ktime_add(ts->iowait_sleeptime, delta);
> +               put_cpu();
>                ts->idle_entrytime = now;
>        }
>
> _
>
>

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-16 20:42       ` Andrew Morton
  (?)
@ 2010-06-16 21:00       ` Sedat Dilek
  -1 siblings, 0 replies; 129+ messages in thread
From: Sedat Dilek @ 2010-06-16 21:00 UTC (permalink / raw)
  To: Andrew Morton
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, dmonakhov, Linux PM List,
	Kernel Testers List, Linus Torvalds, Maciej Rutecki

How do cpu-freq related stuff find its way into mainline?
Is there a GIT repository/branch on <git.kernel.org> where you can pull from?

- Sedat -

On Wed, Jun 16, 2010 at 10:42 PM, Andrew Morton
<akpm@linux-foundation.org> wrote:
> On Wed, 9 Jun 2010 11:22:35 +0200
> "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
>
>> On Wednesday 09 June 2010, Sedat Dilek wrote:
>> > The patch from [1] is still missing.
>> >
>> >    "cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
>> > Dmitry Monakhoc
>> >
>> > Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
>> > Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>
>> >
>> > I have already reported this issue on LKML [2] and cpufreq ML [3].
>> >
>> > - Sedat -
>> >
>> > [1] http://www.spinics.net/lists/cpufreq/msg01631.html
>> > [2] http://lkml.org/lkml/2010/5/31/77
>> > [3] http://www.spinics.net/lists/cpufreq/msg01637.html
>>
>> Thanks, added.
>
> I just merged a different patch whcih should address this:
>
>
> From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
>
> Fix
>
>  BUG: using smp_processor_id() in preemptible [00000000] code: s2disk/3392
>  caller is nr_iowait_cpu+0xe/0x1e
>  Pid: 3392, comm: s2disk Not tainted 2.6.35-rc3-dbg-00106-ga75e02b #2
>  Call Trace:
>  [<c1184c55>] debug_smp_processor_id+0xa5/0xbc
>  [<c10282a5>] nr_iowait_cpu+0xe/0x1e
>  [<c104ab7c>] update_ts_time_stats+0x32/0x6c
>  [<c104ac73>] get_cpu_idle_time_us+0x36/0x58
>  [<c124229b>] get_cpu_idle_time+0x12/0x74
>  [<c1242963>] cpufreq_governor_dbs+0xc3/0x2dc
>  [<c1240437>] __cpufreq_governor+0x51/0x85
>  [<c1241190>] __cpufreq_set_policy+0x10c/0x13d
>  [<c12413d3>] cpufreq_add_dev_interface+0x212/0x233
>  [<c1241b1e>] ? handle_update+0x0/0xd
>  [<c1241a18>] cpufreq_add_dev+0x34b/0x35a
>  [<c103c973>] ? schedule_delayed_work_on+0x11/0x13
>  [<c12c14db>] cpufreq_cpu_callback+0x59/0x63
>  [<c1042f39>] notifier_call_chain+0x26/0x48
>  [<c1042f7d>] __raw_notifier_call_chain+0xe/0x10
>  [<c102efb9>] __cpu_notify+0x15/0x29
>  [<c102efda>] cpu_notify+0xd/0xf
>  [<c12bfb30>] _cpu_up+0xaf/0xd2
>  [<c12b3ad4>] enable_nonboot_cpus+0x3d/0x94
>  [<c1055eef>] hibernation_snapshot+0x104/0x1a2
>  [<c1058b49>] snapshot_ioctl+0x24b/0x53e
>  [<c1028ad1>] ? sub_preempt_count+0x7c/0x89
>  [<c10ab91d>] vfs_ioctl+0x2e/0x8c
>  [<c10588fe>] ? snapshot_ioctl+0x0/0x53e
>  [<c10ac2c7>] do_vfs_ioctl+0x42f/0x45a
>  [<c10a0ba5>] ? fsnotify_modify+0x4f/0x5a
>  [<c11e9dc3>] ? tty_write+0x0/0x1d0
>  [<c10a12d6>] ? vfs_write+0xa2/0xda
>  [<c10ac333>] sys_ioctl+0x41/0x62
>  [<c10027d3>] sysenter_do_call+0x12/0x2d
>
> The initial fix was to use get_cpu/put_cpu in nr_iowait_cpu.  However,
> Arjan stated that "the bug is that it needs to be nr_iowait_cpu(int cpu)".
>
> This patch introduces nr_iowait_cpu(int cpu) and changes to it callers.
>
> akpm: addresses about 30,000,000 different bug reports.
>
> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
> Cc: Arjan van de Ven <arjan@infradead.org>
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: Maxim Levitsky <maximlevitsky@gmail.com>
> Cc: Len Brown <len.brown@intel.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Jiri Slaby <jslaby@suse.cz>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
>
>  drivers/cpuidle/governors/menu.c |   10 ++++++++--
>  include/linux/sched.h            |    2 +-
>  kernel/sched.c                   |    4 ++--
>  kernel/time/tick-sched.c         |    4 +++-
>  4 files changed, 14 insertions(+), 6 deletions(-)
>
> diff -puN drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu drivers/cpuidle/governors/menu.c
> --- a/drivers/cpuidle/governors/menu.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/drivers/cpuidle/governors/menu.c
> @@ -137,15 +137,18 @@ static inline int which_bucket(unsigned
>  {
>        int bucket = 0;
>
> +       int cpu = get_cpu();
>        /*
>         * We keep two groups of stats; one with no
>         * IO pending, one without.
>         * This allows us to calculate
>         * E(duration)|iowait
>         */
> -       if (nr_iowait_cpu())
> +       if (nr_iowait_cpu(cpu))
>                bucket = BUCKETS/2;
>
> +       put_cpu();
> +
>        if (duration < 10)
>                return bucket;
>        if (duration < 100)
> @@ -169,13 +172,16 @@ static inline int which_bucket(unsigned
>  static inline int performance_multiplier(void)
>  {
>        int mult = 1;
> +       int cpu = get_cpu();
>
>        /* for higher loadavg, we are more reluctant */
>
>        mult += 2 * get_loadavg();
>
>        /* for IO wait tasks (per cpu!) we add 5x each */
> -       mult += 10 * nr_iowait_cpu();
> +       mult += 10 * nr_iowait_cpu(cpu);
> +
> +       put_cpu();
>
>        return mult;
>  }
> diff -puN include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu include/linux/sched.h
> --- a/include/linux/sched.h~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/include/linux/sched.h
> @@ -139,7 +139,7 @@ extern int nr_processes(void);
>  extern unsigned long nr_running(void);
>  extern unsigned long nr_uninterruptible(void);
>  extern unsigned long nr_iowait(void);
> -extern unsigned long nr_iowait_cpu(void);
> +extern unsigned long nr_iowait_cpu(int cpu);
>  extern unsigned long this_cpu_load(void);
>
>
> diff -puN kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/sched.c
> --- a/kernel/sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/kernel/sched.c
> @@ -2864,9 +2864,9 @@ unsigned long nr_iowait(void)
>        return sum;
>  }
>
> -unsigned long nr_iowait_cpu(void)
> +unsigned long nr_iowait_cpu(int cpu)
>  {
> -       struct rq *this = this_rq();
> +       struct rq *this = cpu_rq(cpu);
>        return atomic_read(&this->nr_iowait);
>  }
>
> diff -puN kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu kernel/time/tick-sched.c
> --- a/kernel/time/tick-sched.c~cpuidle-avoid-using-smp_processor_id-in-preemptible-code-nr_iowait_cpu
> +++ a/kernel/time/tick-sched.c
> @@ -159,10 +159,12 @@ update_ts_time_stats(struct tick_sched *
>        ktime_t delta;
>
>        if (ts->idle_active) {
> +               int cpu = get_cpu();
>                delta = ktime_sub(now, ts->idle_entrytime);
>                ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
> -               if (nr_iowait_cpu() > 0)
> +               if (nr_iowait_cpu(cpu) > 0)
>                        ts->iowait_sleeptime = ktime_add(ts->iowait_sleeptime, delta);
> +               put_cpu();
>                ts->idle_entrytime = now;
>        }
>
> _
>
>
_______________________________________________
linux-pm mailing list
linux-pm@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-16 21:00         ` Sedat Dilek
  (?)
  (?)
@ 2010-06-16 21:34         ` Andrew Morton
  -1 siblings, 0 replies; 129+ messages in thread
From: Andrew Morton @ 2010-06-16 21:34 UTC (permalink / raw)
  To: sedat.dilek
  Cc: Sedat Dilek, Rafael J. Wysocki, Linux Kernel Mailing List,
	Maciej Rutecki, Linus Torvalds, Kernel Testers List,
	Network Development, Linux ACPI, Linux PM List, Linux SCSI List,
	Linux Wireless List, DRI, dmonakhov

On Wed, 16 Jun 2010 23:00:37 +0200
Sedat Dilek <sedat.dilek@googlemail.com> wrote:

> On Wed, Jun 16, 2010 at 10:42 PM, Andrew Morton
> <akpm@linux-foundation.org> wrote:
> > On Wed, 9 Jun 2010 11:22:35 +0200
> > "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
> >
> >> On Wednesday 09 June 2010, Sedat Dilek wrote:
> >> > The patch from [1] is still missing.
> >> >
> >> > __ __"cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
> >> > Dmitry Monakhoc
> >> >
> >> > Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
> >> > Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>
> >> >
> >> > I have already reported this issue on LKML [2] and cpufreq ML [3].
> >> >
> >> > - Sedat -
> >> >
> >> > [1] http://www.spinics.net/lists/cpufreq/msg01631.html
> >> > [2] http://lkml.org/lkml/2010/5/31/77
> >> > [3] http://www.spinics.net/lists/cpufreq/msg01637.html
> >>
> >> Thanks, added.
> >
> > I just merged a different patch whcih should address this:
>
> How do cpu-freq related stuff find its way into mainline?
> Is there a GIT repository/branch on <git.kernel.org> where you can pull from?
> 

(top-posting repaired.  Please don't)

Usually via the cpufreq git tree, mailing list and maintainer, as
described in ./MAINTAINERS.

But for a patch like this one, I'll just scoot it into mainline unless
Dave happens to grab it before I do that.


^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-16 21:00         ` Sedat Dilek
                           ` (2 preceding siblings ...)
  (?)
@ 2010-06-16 21:34         ` Andrew Morton
  -1 siblings, 0 replies; 129+ messages in thread
From: Andrew Morton @ 2010-06-16 21:34 UTC (permalink / raw)
  To: sedat.dilek
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Linux ACPI, dmonakhov, Linux, List,
	Kernel Testers List, Linus Torvalds, Sedat Dilek, Maciej Rutecki

On Wed, 16 Jun 2010 23:00:37 +0200
Sedat Dilek <sedat.dilek@googlemail.com> wrote:

> On Wed, Jun 16, 2010 at 10:42 PM, Andrew Morton
> <akpm@linux-foundation.org> wrote:
> > On Wed, 9 Jun 2010 11:22:35 +0200
> > "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
> >
> >> On Wednesday 09 June 2010, Sedat Dilek wrote:
> >> > The patch from [1] is still missing.
> >> >
> >> > __ __"cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
> >> > Dmitry Monakhoc
> >> >
> >> > Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
> >> > Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>
> >> >
> >> > I have already reported this issue on LKML [2] and cpufreq ML [3].
> >> >
> >> > - Sedat -
> >> >
> >> > [1] http://www.spinics.net/lists/cpufreq/msg01631.html
> >> > [2] http://lkml.org/lkml/2010/5/31/77
> >> > [3] http://www.spinics.net/lists/cpufreq/msg01637.html
> >>
> >> Thanks, added.
> >
> > I just merged a different patch whcih should address this:
>
> How do cpu-freq related stuff find its way into mainline?
> Is there a GIT repository/branch on <git.kernel.org> where you can pull from?
> 

(top-posting repaired.  Please don't)

Usually via the cpufreq git tree, mailing list and maintainer, as
described in ./MAINTAINERS.

But for a patch like this one, I'll just scoot it into mainline unless
Dave happens to grab it before I do that.

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: 2.6.35-rc2-git2: Reported regressions from 2.6.34
  2010-06-16 21:00         ` Sedat Dilek
  (?)
@ 2010-06-16 21:34         ` Andrew Morton
  -1 siblings, 0 replies; 129+ messages in thread
From: Andrew Morton @ 2010-06-16 21:34 UTC (permalink / raw)
  To: sedat.dilek
  Cc: DRI, Linux SCSI List, Network Development, Linux Wireless List,
	Linux Kernel Mailing List, Rafael J. Wysocki, Linux ACPI,
	dmonakhov, List, Kernel Testers List, Linus Torvalds,
	Sedat Dilek, Maciej Rutecki

On Wed, 16 Jun 2010 23:00:37 +0200
Sedat Dilek <sedat.dilek@googlemail.com> wrote:

> On Wed, Jun 16, 2010 at 10:42 PM, Andrew Morton
> <akpm@linux-foundation.org> wrote:
> > On Wed, 9 Jun 2010 11:22:35 +0200
> > "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
> >
> >> On Wednesday 09 June 2010, Sedat Dilek wrote:
> >> > The patch from [1] is still missing.
> >> >
> >> > __ __"cpufreq-call-nr_iowait_cpu-with-disabled-preemption.patch" from
> >> > Dmitry Monakhoc
> >> >
> >> > Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
> >> > Tested-by Maciej Rutecki <maciej.rutecki@gmail.com>
> >> >
> >> > I have already reported this issue on LKML [2] and cpufreq ML [3].
> >> >
> >> > - Sedat -
> >> >
> >> > [1] http://www.spinics.net/lists/cpufreq/msg01631.html
> >> > [2] http://lkml.org/lkml/2010/5/31/77
> >> > [3] http://www.spinics.net/lists/cpufreq/msg01637.html
> >>
> >> Thanks, added.
> >
> > I just merged a different patch whcih should address this:
>
> How do cpu-freq related stuff find its way into mainline?
> Is there a GIT repository/branch on <git.kernel.org> where you can pull from?
> 

(top-posting repaired.  Please don't)

Usually via the cpufreq git tree, mailing list and maintainer, as
described in ./MAINTAINERS.

But for a patch like this one, I'll just scoot it into mainline unless
Dave happens to grab it before I do that.


------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
--

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-18 20:10               ` Jesse Barnes
  0 siblings, 0 replies; 129+ messages in thread
From: Jesse Barnes @ 2010-06-18 20:10 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Mikael Pettersson, Linux Kernel Mailing List,
	Kernel Testers List, Maciej Rutecki

On Sat, 12 Jun 2010 20:52:25 +0200
"Rafael J. Wysocki" <rjw@sisk.pl> wrote:

> On Saturday, June 12, 2010, Mikael Pettersson wrote:
> > Mikael Pettersson writes:
> >  > Rafael J. Wysocki writes:
> >  >  > On Wednesday, June 09, 2010, Mikael Pettersson wrote:
> >  >  > > Rafael J. Wysocki wrote:
> >  >  > > > This message has been generated automatically as a part of a summary report
> >  >  > > > of recent regressions.
> >  >  > > > 
> >  >  > > > The following bug entry is on the current list of known regressions
> >  >  > > > from 2.6.34.  Please verify if it still should be listed and let the tracking team
> >  >  > > > know (either way).
> >  >  > > > 
> >  >  > > > 
> >  >  > > > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=3D16161
> >  >  > > > Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename =
> >  >  > > > ... XVR-600 related?
> >  >  > > > Submitter	: Mikael Pettersson <mikpe@it.uu.se>
> >  >  > > > Date		: 2010-06-01 19:57 (8 days old)
> >  >  > > > Message-ID	: <19461.26166.427857.612983@pilspetsen.it.uu.se>
> >  >  > > > References	: http://marc.info/?l=3Dlinux-kernel&m=3D127542227511925&w=3D2
> >  >  > > 
> >  >  > > The bug is still there in 2.6.35-rc2. I haven't checked post-rc2 git snapshots.
> >  >  > 
> >  >  > Please test post-rc2 too.
> >  > 
> >  > The bug is still there in 2.6.35-rc2-git4.
> > 
> > The bug appears to be gone in 2.6.35-rc3.
> 
> Good.
> 
> > I don't know which commit actually fixed it.
> 
> Well, it would be useful information, but it's much more important it's not
> there anymore.

I reverted the symlink patch that was causing the trouble.  The root
cause is elsewhere though; it seems some firmwares report duplicate PCI
slot numbers...

-- 
Jesse Barnes, Intel Open Source Technology Center

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-18 20:10               ` Jesse Barnes
  0 siblings, 0 replies; 129+ messages in thread
From: Jesse Barnes @ 2010-06-18 20:10 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Mikael Pettersson, Linux Kernel Mailing List,
	Kernel Testers List, Maciej Rutecki

On Sat, 12 Jun 2010 20:52:25 +0200
"Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org> wrote:

> On Saturday, June 12, 2010, Mikael Pettersson wrote:
> > Mikael Pettersson writes:
> >  > Rafael J. Wysocki writes:
> >  >  > On Wednesday, June 09, 2010, Mikael Pettersson wrote:
> >  >  > > Rafael J. Wysocki wrote:
> >  >  > > > This message has been generated automatically as a part of a summary report
> >  >  > > > of recent regressions.
> >  >  > > > 
> >  >  > > > The following bug entry is on the current list of known regressions
> >  >  > > > from 2.6.34.  Please verify if it still should be listed and let the tracking team
> >  >  > > > know (either way).
> >  >  > > > 
> >  >  > > > 
> >  >  > > > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=3D16161
> >  >  > > > Subject		: [2.6.35-rc1 regression] sysfs: cannot create duplicate filename =
> >  >  > > > ... XVR-600 related?
> >  >  > > > Submitter	: Mikael Pettersson <mikpe-1zs4UD6AkMk@public.gmane.org>
> >  >  > > > Date		: 2010-06-01 19:57 (8 days old)
> >  >  > > > Message-ID	: <19461.26166.427857.612983-tgku4HJDRZih8lFjZTKsyTAV6s6igYVG@public.gmane.org>
> >  >  > > > References	: http://marc.info/?l=3Dlinux-kernel&m=3D127542227511925&w=3D2
> >  >  > > 
> >  >  > > The bug is still there in 2.6.35-rc2. I haven't checked post-rc2 git snapshots.
> >  >  > 
> >  >  > Please test post-rc2 too.
> >  > 
> >  > The bug is still there in 2.6.35-rc2-git4.
> > 
> > The bug appears to be gone in 2.6.35-rc3.
> 
> Good.
> 
> > I don't know which commit actually fixed it.
> 
> Well, it would be useful information, but it's much more important it's not
> there anymore.

I reverted the symlink patch that was causing the trouble.  The root
cause is elsewhere though; it seems some firmwares report duplicate PCI
slot numbers...

-- 
Jesse Barnes, Intel Open Source Technology Center

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
  2010-06-18 20:10               ` Jesse Barnes
  (?)
@ 2010-06-18 20:26               ` David Miller
  2010-06-18 20:40                 ` Brian Bloniarz
  -1 siblings, 1 reply; 129+ messages in thread
From: David Miller @ 2010-06-18 20:26 UTC (permalink / raw)
  To: jbarnes; +Cc: rjw, mikpe, linux-kernel, kernel-testers, maciej.rutecki

From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri, 18 Jun 2010 13:10:49 -0700

> I reverted the symlink patch that was causing the trouble.  The root
> cause is elsewhere though; it seems some firmwares report duplicate PCI
> slot numbers...

Instead of postulating, you can confirm or deny such a theory
by taking a look at the repository of sparc openfirmware tree
dumps maintained at:

	master.kernel.org:/pub/scm/linux/kernel/git/davem/prtconfs.git

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
  2010-06-18 20:26               ` David Miller
@ 2010-06-18 20:40                 ` Brian Bloniarz
  2010-06-18 20:43                     ` Jesse Barnes
  2010-06-18 21:01                     ` David Miller
  0 siblings, 2 replies; 129+ messages in thread
From: Brian Bloniarz @ 2010-06-18 20:40 UTC (permalink / raw)
  To: David Miller
  Cc: jbarnes, rjw, mikpe, linux-kernel, kernel-testers,
	maciej.rutecki, achiang

On 06/18/2010 04:26 PM, David Miller wrote:
> From: Jesse Barnes <jbarnes@virtuousgeek.org>
> Date: Fri, 18 Jun 2010 13:10:49 -0700
> 
>> I reverted the symlink patch that was causing the trouble.  The root
>> cause is elsewhere though; it seems some firmwares report duplicate PCI
>> slot numbers...
> 
> Instead of postulating, you can confirm or deny such a theory
> by taking a look at the repository of sparc openfirmware tree
> dumps maintained at:
> 
> 	master.kernel.org:/pub/scm/linux/kernel/git/davem/prtconfs.git

(Adding Alex Chiang to the cc list)

I was actually under the impression that it was just an 
issue with the reverted patch, not an actual problem with
hardware.

In the patch, 2 individual code paths were trying to
create the same symlinks:
pci-sysfs.c:pci_create_slot_links(struct pci_dev *dev)
and
slot.c:create_sysfs_files(struct pci_slot *slot).
I think some archs managed to call those both during
initialization, and some not.

commit 75568f8094eb0333e9c2109b23cbc8b82d318a3c
Author: Alex Chiang <achiang@hp.com>
Date:   Mon Mar 8 10:24:29 2010 -0700

    PCI: create function symlinks in /sys/bus/pci/slots/N/
    
    Create convenience symlinks in sysfs, linking slots to device
    functions, and vice versa. These links make it easier for users to
    figure out which devices actually live in what slots.
    
    For example:
    
    sapphire:/sys/bus/pci/slots # ls
    1  10  2  3  4  5  6  7  8  9
    
    sapphire:/sys/bus/pci/slots # ls -l 3
    total 0
    -r--r--r-- 1 root root 65536 Aug 18 14:10 address
    lrwxrwxrwx 1 root root     0 Aug 18 14:10 function0 ->
    ../../../../devices/pci0000:23/0000:23:01.0
    lrwxrwxrwx 1 root root     0 Aug 18 14:10 function1 ->
    ../../../../devices/pci0000:23/0000:23:01.1
    
    sapphire:/sys/bus/pci/slots # ls -l 3/function0/slot
    lrwxrwxrwx 1 root root 0 Aug 18 14:13 3/function0/slot ->
    ../../../bus/pci/slots/3
    
    The original form of this patch was written by Matthew Wilcox,
    and was enhanced to include links from the sysfs slots/ directory
    pointing back at the device functions.
    
    Cc: willy@linux.intel.com
    Signed-off-by: Alex Chiang <achiang@hp.com>
    Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 25be325..428676c 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -133,6 +133,46 @@ Description:
 		The symbolic link points to the PCI device sysfs entry of the
 		Physical Function this device associates with.
 
+
+What:		/sys/bus/pci/slots/...
+Date:		April 2005 (possibly older)
+KernelVersion:	2.6.12 (possibly older)
+Contact:	linux-pci@vger.kernel.org
+Description:
+		When the appropriate driver is loaded, it will create a
+		directory per claimed physical PCI slot in
+		/sys/bus/pci/slots/.  The names of these directories are
+		specific to the driver, which in turn, are specific to the
+		platform, but in general, should match the label on the
+		machine's physical chassis.
+
+		The drivers that can create slot directories include the
+		PCI hotplug drivers, and as of 2.6.27, the pci_slot driver.
+
+		The slot directories contain, at a minimum, a file named
+		'address' which contains the PCI bus:device:function tuple.
+		Other files may appear as well, but are specific to the
+		driver.
+
+What:		/sys/bus/pci/slots/.../function[0-7]
+Date:		March 2010
+KernelVersion:	2.6.35
+Contact:	linux-pci@vger.kernel.org
+Description:
+		If PCI slot directories (as described above) are created,
+		and the physical slot is actually populated with a device,
+		symbolic links in the slot directory pointing to the
+		device's PCI functions are created as well.
+
+What:		/sys/bus/pci/devices/.../slot
+Date:		March 2010
+KernelVersion:	2.6.35
+Contact:	linux-pci@vger.kernel.org
+Description:
+		If PCI slot directories (as described above) are created,
+		a symbolic link pointing to the slot directory will be
+		created as well.
+
 What:		/sys/bus/pci/slots/.../module
 Date:		June 2009
 Contact:	linux-pci@vger.kernel.org
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index fad9398..941e939 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1011,6 +1011,39 @@ error:
 	return retval;
 }
 
+static void pci_remove_slot_links(struct pci_dev *dev)
+{
+	char func[10];
+	struct pci_slot *slot;
+
+	sysfs_remove_link(&dev->dev.kobj, "slot");
+	list_for_each_entry(slot, &dev->bus->slots, list) {
+		if (slot->number != PCI_SLOT(dev->devfn))
+			continue;
+		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
+		sysfs_remove_link(&slot->kobj, func);
+	}
+}
+
+static int pci_create_slot_links(struct pci_dev *dev)
+{
+	int result = 0;
+	char func[10];
+	struct pci_slot *slot;
+
+	list_for_each_entry(slot, &dev->bus->slots, list) {
+		if (slot->number != PCI_SLOT(dev->devfn))
+			continue;
+		result = sysfs_create_link(&dev->dev.kobj, &slot->kobj, "slot");
+		if (result)
+			goto out;
+		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
+		result = sysfs_create_link(&slot->kobj, &dev->dev.kobj, func);
+	}
+out:
+	return result;
+}
+
 int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 {
 	int retval;
@@ -1073,6 +1106,8 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 	if (retval)
 		goto err_vga_file;
 
+	pci_create_slot_links(pdev);
+
 	return 0;
 
 err_vga_file:
@@ -1122,6 +1157,8 @@ void pci_remove_sysfs_dev_files(struct pci_dev *pdev)
 	if (!sysfs_initialized)
 		return;
 
+	pci_remove_slot_links(pdev);
+
 	pci_remove_capabilities_sysfs(pdev);
 
 	if (pdev->cfg_size < PCI_CFG_SPACE_EXP_SIZE)
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 659eaa0..e0189cf 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -97,6 +97,50 @@ static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf)
 	return bus_speed_read(slot->bus->cur_bus_speed, buf);
 }
 
+static void remove_sysfs_files(struct pci_slot *slot)
+{
+	char func[10];
+	struct list_head *tmp;
+
+	list_for_each(tmp, &slot->bus->devices) {
+		struct pci_dev *dev = pci_dev_b(tmp);
+		if (PCI_SLOT(dev->devfn) != slot->number)
+			continue;
+		sysfs_remove_link(&dev->dev.kobj, "slot");
+
+		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
+		sysfs_remove_link(&slot->kobj, func);
+	}
+}
+
+static int create_sysfs_files(struct pci_slot *slot)
+{
+	int result;
+	char func[10];
+	struct list_head *tmp;
+
+	list_for_each(tmp, &slot->bus->devices) {
+		struct pci_dev *dev = pci_dev_b(tmp);
+		if (PCI_SLOT(dev->devfn) != slot->number)
+			continue;
+
+		result = sysfs_create_link(&dev->dev.kobj, &slot->kobj, "slot");
+		if (result)
+			goto fail;
+
+		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
+		result = sysfs_create_link(&slot->kobj, &dev->dev.kobj, func);
+		if (result)
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	remove_sysfs_files(slot);
+	return result;
+}
+
 static void pci_slot_release(struct kobject *kobj)
 {
 	struct pci_dev *dev;
@@ -109,6 +153,8 @@ static void pci_slot_release(struct kobject *kobj)
 		if (PCI_SLOT(dev->devfn) == slot->number)
 			dev->slot = NULL;
 
+	remove_sysfs_files(slot);
+
 	list_del(&slot->list);
 
 	kfree(slot);
@@ -300,6 +346,8 @@ placeholder:
 	INIT_LIST_HEAD(&slot->list);
 	list_add(&slot->list, &parent->slots);
 
+	create_sysfs_files(slot);
+
 	list_for_each_entry(dev, &parent->devices, bus_list)
 		if (PCI_SLOT(dev->devfn) == slot_nr)
 			dev->slot = slot;

^ permalink raw reply related	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-18 20:43                     ` Jesse Barnes
  0 siblings, 0 replies; 129+ messages in thread
From: Jesse Barnes @ 2010-06-18 20:43 UTC (permalink / raw)
  To: Brian Bloniarz
  Cc: David Miller, rjw, mikpe, linux-kernel, kernel-testers,
	maciej.rutecki, achiang

On Fri, 18 Jun 2010 16:40:44 -0400
Brian Bloniarz <bmb@athenacr.com> wrote:

> On 06/18/2010 04:26 PM, David Miller wrote:
> > From: Jesse Barnes <jbarnes@virtuousgeek.org>
> > Date: Fri, 18 Jun 2010 13:10:49 -0700
> > 
> >> I reverted the symlink patch that was causing the trouble.  The root
> >> cause is elsewhere though; it seems some firmwares report duplicate PCI
> >> slot numbers...
> > 
> > Instead of postulating, you can confirm or deny such a theory
> > by taking a look at the repository of sparc openfirmware tree
> > dumps maintained at:
> > 
> > 	master.kernel.org:/pub/scm/linux/kernel/git/davem/prtconfs.git
> 
> (Adding Alex Chiang to the cc list)
> 
> I was actually under the impression that it was just an 
> issue with the reverted patch, not an actual problem with
> hardware.

Yeah, I think you're right.  I reverted it at Alex's request and
assumed it was a firmware or configuration problem.  Looking at the
thread again I see that was a bad assumption.

> In the patch, 2 individual code paths were trying to
> create the same symlinks:
> pci-sysfs.c:pci_create_slot_links(struct pci_dev *dev)
> and
> slot.c:create_sysfs_files(struct pci_slot *slot).
> I think some archs managed to call those both during
> initialization, and some not.

Well that would explain it too.  I'm happy to take a fixed up patch if
there's demand.

Thanks,
-- 
Jesse Barnes, Intel Open Source Technology Center

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-18 20:43                     ` Jesse Barnes
  0 siblings, 0 replies; 129+ messages in thread
From: Jesse Barnes @ 2010-06-18 20:43 UTC (permalink / raw)
  To: Brian Bloniarz
  Cc: David Miller, rjw-KKrjLPT3xs0, mikpe-1zs4UD6AkMk,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	kernel-testers-u79uwXL29TY76Z2rM5mHXA,
	maciej.rutecki-Re5JQEeQqe8AvxtiuMwx3w,
	achiang-Z7WLFzj8eWMS+FvcfC7Uqw

On Fri, 18 Jun 2010 16:40:44 -0400
Brian Bloniarz <bmb-FfUH/8kkONhWk0Htik3J/w@public.gmane.org> wrote:

> On 06/18/2010 04:26 PM, David Miller wrote:
> > From: Jesse Barnes <jbarnes-Y1mF5jBUw70BENJcbMCuUQ@public.gmane.org>
> > Date: Fri, 18 Jun 2010 13:10:49 -0700
> > 
> >> I reverted the symlink patch that was causing the trouble.  The root
> >> cause is elsewhere though; it seems some firmwares report duplicate PCI
> >> slot numbers...
> > 
> > Instead of postulating, you can confirm or deny such a theory
> > by taking a look at the repository of sparc openfirmware tree
> > dumps maintained at:
> > 
> > 	master.kernel.org:/pub/scm/linux/kernel/git/davem/prtconfs.git
> 
> (Adding Alex Chiang to the cc list)
> 
> I was actually under the impression that it was just an 
> issue with the reverted patch, not an actual problem with
> hardware.

Yeah, I think you're right.  I reverted it at Alex's request and
assumed it was a firmware or configuration problem.  Looking at the
thread again I see that was a bad assumption.

> In the patch, 2 individual code paths were trying to
> create the same symlinks:
> pci-sysfs.c:pci_create_slot_links(struct pci_dev *dev)
> and
> slot.c:create_sysfs_files(struct pci_slot *slot).
> I think some archs managed to call those both during
> initialization, and some not.

Well that would explain it too.  I'm happy to take a fixed up patch if
there's demand.

Thanks,
-- 
Jesse Barnes, Intel Open Source Technology Center

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-18 21:01                     ` David Miller
  0 siblings, 0 replies; 129+ messages in thread
From: David Miller @ 2010-06-18 21:01 UTC (permalink / raw)
  To: bmb
  Cc: jbarnes, rjw, mikpe, linux-kernel, kernel-testers,
	maciej.rutecki, achiang

From: Brian Bloniarz <bmb@athenacr.com>
Date: Fri, 18 Jun 2010 16:40:44 -0400

> In the patch, 2 individual code paths were trying to
> create the same symlinks:
> pci-sysfs.c:pci_create_slot_links(struct pci_dev *dev)
> and
> slot.c:create_sysfs_files(struct pci_slot *slot).
> I think some archs managed to call those both during
> initialization, and some not.

Right, and if I recall correctly when adding sparc64 support for
the sysfs slot stuff if you wanted to create the slots in a
non-hotplug situation (which all of the sparc64 cases are) you
had to defer the sysfs node creation to later in the boot than
when the PCI buses are actually probed and populated.

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-18 21:01                     ` David Miller
  0 siblings, 0 replies; 129+ messages in thread
From: David Miller @ 2010-06-18 21:01 UTC (permalink / raw)
  To: bmb-FfUH/8kkONhWk0Htik3J/w
  Cc: jbarnes-Y1mF5jBUw70BENJcbMCuUQ, rjw-KKrjLPT3xs0,
	mikpe-1zs4UD6AkMk, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	kernel-testers-u79uwXL29TY76Z2rM5mHXA,
	maciej.rutecki-Re5JQEeQqe8AvxtiuMwx3w,
	achiang-Z7WLFzj8eWMS+FvcfC7Uqw

From: Brian Bloniarz <bmb-FfUH/8kkONhWk0Htik3J/w@public.gmane.org>
Date: Fri, 18 Jun 2010 16:40:44 -0400

> In the patch, 2 individual code paths were trying to
> create the same symlinks:
> pci-sysfs.c:pci_create_slot_links(struct pci_dev *dev)
> and
> slot.c:create_sysfs_files(struct pci_slot *slot).
> I think some archs managed to call those both during
> initialization, and some not.

Right, and if I recall correctly when adding sparc64 support for
the sysfs slot stuff if you wanted to create the slots in a
non-hotplug situation (which all of the sparc64 cases are) you
had to defer the sysfs node creation to later in the boot than
when the PCI buses are actually probed and populated.

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-21  4:58                       ` Alex Chiang
  0 siblings, 0 replies; 129+ messages in thread
From: Alex Chiang @ 2010-06-21  4:58 UTC (permalink / raw)
  To: David Miller
  Cc: bmb, jbarnes, rjw, mikpe, linux-kernel, kernel-testers, maciej.rutecki

* David Miller <davem@davemloft.net>:
> From: Brian Bloniarz <bmb@athenacr.com>
> Date: Fri, 18 Jun 2010 16:40:44 -0400
> 
> > In the patch, 2 individual code paths were trying to
> > create the same symlinks:
> > pci-sysfs.c:pci_create_slot_links(struct pci_dev *dev)
> > and
> > slot.c:create_sysfs_files(struct pci_slot *slot).
> > I think some archs managed to call those both during
> > initialization, and some not.
> 
> Right, and if I recall correctly when adding sparc64 support for
> the sysfs slot stuff if you wanted to create the slots in a
> non-hotplug situation (which all of the sparc64 cases are) you
> had to defer the sysfs node creation to later in the boot than
> when the PCI buses are actually probed and populated.

Yeah, we call pci_create_sysfs_dev_files() from pci_sysfs_init()
and from pci_bus_add_device().

I haven't figured out why it is that creating other sysfs files,
e.g. rom files, capabilities, etc. don't also result in duplicate
entries while the slots do.

Clearly my expectation was incorrect for the cases when
pci_create_sysfs_dev_files() gets called on the different
architectures.

Anyhow, thanks for the revert Jesse. I wish I had more
time/energy to dig into this right now, but I really don't.
Sorry.

/ac

^ permalink raw reply	[flat|nested] 129+ messages in thread

* Re: [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related?
@ 2010-06-21  4:58                       ` Alex Chiang
  0 siblings, 0 replies; 129+ messages in thread
From: Alex Chiang @ 2010-06-21  4:58 UTC (permalink / raw)
  To: David Miller
  Cc: bmb-FfUH/8kkONhWk0Htik3J/w, jbarnes-Y1mF5jBUw70BENJcbMCuUQ,
	rjw-KKrjLPT3xs0, mikpe-1zs4UD6AkMk,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	kernel-testers-u79uwXL29TY76Z2rM5mHXA,
	maciej.rutecki-Re5JQEeQqe8AvxtiuMwx3w

* David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>:
> From: Brian Bloniarz <bmb-FfUH/8kkONhWk0Htik3J/w@public.gmane.org>
> Date: Fri, 18 Jun 2010 16:40:44 -0400
> 
> > In the patch, 2 individual code paths were trying to
> > create the same symlinks:
> > pci-sysfs.c:pci_create_slot_links(struct pci_dev *dev)
> > and
> > slot.c:create_sysfs_files(struct pci_slot *slot).
> > I think some archs managed to call those both during
> > initialization, and some not.
> 
> Right, and if I recall correctly when adding sparc64 support for
> the sysfs slot stuff if you wanted to create the slots in a
> non-hotplug situation (which all of the sparc64 cases are) you
> had to defer the sysfs node creation to later in the boot than
> when the PCI buses are actually probed and populated.

Yeah, we call pci_create_sysfs_dev_files() from pci_sysfs_init()
and from pci_bus_add_device().

I haven't figured out why it is that creating other sysfs files,
e.g. rom files, capabilities, etc. don't also result in duplicate
entries while the slots do.

Clearly my expectation was incorrect for the cases when
pci_create_sysfs_dev_files() gets called on the different
architectures.

Anyhow, thanks for the revert Jesse. I wish I had more
time/energy to dig into this right now, but I really don't.
Sorry.

/ac

^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16092] Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
  2010-06-20 22:11 2.6.35-rc3: " Rafael J. Wysocki
@ 2010-06-20 22:17   ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-20 22:17 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Christian Casteyde, Venki

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16092
Subject		: Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
Submitter	: Christian Casteyde <casteyde.christian@free.fr>
Date		: 2010-06-01 18:08 (20 days old)
Handled-By	: Venki <venki@google.com>
Patch		: https://bugzilla.kernel.org/show_bug.cgi?id=16092#c2



^ permalink raw reply	[flat|nested] 129+ messages in thread

* [Bug #16092] Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
@ 2010-06-20 22:17   ` Rafael J. Wysocki
  0 siblings, 0 replies; 129+ messages in thread
From: Rafael J. Wysocki @ 2010-06-20 22:17 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Kernel Testers List, Maciej Rutecki, Christian Casteyde, Venki

This message has been generated automatically as a part of a summary report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.34.  Please verify if it still should be listed and let the tracking team
know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=16092
Subject		: Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb
Submitter	: Christian Casteyde <casteyde.christian-GANU6spQydw@public.gmane.org>
Date		: 2010-06-01 18:08 (20 days old)
Handled-By	: Venki <venki-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
Patch		: https://bugzilla.kernel.org/show_bug.cgi?id=16092#c2


^ permalink raw reply	[flat|nested] 129+ messages in thread

end of thread, other threads:[~2010-06-21  4:58 UTC | newest]

Thread overview: 129+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-06-08 22:06 2.6.35-rc2-git2: Reported regressions from 2.6.34 Rafael J. Wysocki
2010-06-08 22:06 ` [Bug #16037] NULL Pointer dereference in __ir_input_register/budget_ci_attach Rafael J. Wysocki
2010-06-08 22:06   ` Rafael J. Wysocki
2010-06-08 22:10 ` [Bug #16122] 2.6.35-rc1: WARNING at fs/fs-writeback.c:1142 __mark_inode_dirty+0x103/0x170 Rafael J. Wysocki
2010-06-08 22:10   ` Rafael J. Wysocki
2010-06-09  2:52   ` Larry Finger
2010-06-09  2:52     ` Larry Finger
2010-06-09  8:51     ` Rafael J. Wysocki
2010-06-09  8:51       ` Rafael J. Wysocki
2010-06-08 22:10 ` [Bug #16127] Boot freeze on HP Compaq nx6325 (RS482) with Radeon KMS Rafael J. Wysocki
2010-06-08 22:10 ` [Bug #16090] sysfs: cannot create duplicate filename Rafael J. Wysocki
2010-06-08 22:10 ` [Bug #16092] Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb Rafael J. Wysocki
2010-06-08 22:10   ` Rafael J. Wysocki
2010-06-08 22:10 ` [Bug #16120] Oops: 0000 [#1] SMP, unable to handle kernel NULL pointer dereference at (null) Rafael J. Wysocki
2010-06-08 22:10   ` Rafael J. Wysocki
2010-06-08 22:10 ` [Bug #16104] Radeon KMS does not start after merge of the new PM-Code Rafael J. Wysocki
2010-06-08 22:10   ` Rafael J. Wysocki
2010-06-08 22:10 ` [Bug #16129] BUG: using smp_processor_id() in preemptible [00000000] code: jbd2/sda2 Rafael J. Wysocki
2010-06-08 22:10 ` [Bug #16160] 2.6.35 Radeon KMS power management regression? Rafael J. Wysocki
2010-06-08 22:10 ` [Bug #16131] kernel BUG at fs/btrfs/extent-tree.c:4363 (btrfs_free_tree_block) Rafael J. Wysocki
2010-06-08 22:10   ` Rafael J. Wysocki
2010-06-08 22:10 ` [Bug #16145] Unable to boot after "ACPI: Don't let acpi_pad needlessly mark TSC unstable" Rafael J. Wysocki
2010-06-08 22:10 ` [Bug #16161] [2.6.35-rc1 regression] sysfs: cannot create duplicate filename ... XVR-600 related? Rafael J. Wysocki
2010-06-08 22:10   ` Rafael J. Wysocki
2010-06-09 12:39   ` Mikael Pettersson
2010-06-09 12:39     ` Mikael Pettersson
2010-06-09 22:26     ` Rafael J. Wysocki
2010-06-10 10:09       ` Mikael Pettersson
2010-06-10 10:09         ` Mikael Pettersson
2010-06-10 15:37         ` Rafael J. Wysocki
2010-06-10 15:37           ` Rafael J. Wysocki
2010-06-12 16:15         ` Mikael Pettersson
2010-06-12 18:52           ` Rafael J. Wysocki
2010-06-18 20:10             ` Jesse Barnes
2010-06-18 20:10               ` Jesse Barnes
2010-06-18 20:26               ` David Miller
2010-06-18 20:40                 ` Brian Bloniarz
2010-06-18 20:43                   ` Jesse Barnes
2010-06-18 20:43                     ` Jesse Barnes
2010-06-18 21:01                   ` David Miller
2010-06-18 21:01                     ` David Miller
2010-06-21  4:58                     ` Alex Chiang
2010-06-21  4:58                       ` Alex Chiang
2010-06-08 22:10 ` [Bug #16163] [2.6.35-rc1 Regression] i915: Commit cfecde causes VGA to stay off Rafael J. Wysocki
2010-06-09  1:53 ` 2.6.35-rc2-git2: Reported regressions from 2.6.34 Linus Torvalds
2010-06-09  1:53   ` Linus Torvalds
2010-06-09  1:53   ` Linus Torvalds
2010-06-09  2:26   ` Mauro Carvalho Chehab
2010-06-09  2:26   ` Mauro Carvalho Chehab
2010-06-09  2:26   ` Mauro Carvalho Chehab
2010-06-09  2:26     ` Mauro Carvalho Chehab
2010-06-09  9:00     ` Rafael J. Wysocki
2010-06-09  9:00     ` Rafael J. Wysocki
2010-06-09  9:00       ` Rafael J. Wysocki
2010-06-09  9:00     ` Rafael J. Wysocki
2010-06-09  2:38   ` Carl Worth
2010-06-09  2:38   ` Carl Worth
2010-06-09  2:38     ` Carl Worth
2010-06-09  2:38     ` Carl Worth
2010-06-09  2:38   ` Carl Worth
2010-06-09  5:34   ` Ingo Molnar
2010-06-09  5:34   ` Ingo Molnar
2010-06-09  5:34   ` Ingo Molnar
2010-06-09  6:36   ` Eric Dumazet
2010-06-09  6:36   ` Eric Dumazet
2010-06-09  6:36     ` Eric Dumazet
2010-06-09  7:53   ` Jens Axboe
2010-06-09  7:53   ` Jens Axboe
2010-06-09  7:53   ` Jens Axboe
2010-06-09  8:55     ` Rafael J. Wysocki
2010-06-09  8:55     ` Rafael J. Wysocki
2010-06-09  8:55     ` Rafael J. Wysocki
2010-06-09  9:32     ` Ingo Molnar
2010-06-09  9:39       ` Jens Axboe
2010-06-09  9:39       ` Jens Axboe
2010-06-09  9:39       ` Jens Axboe
2010-06-09  9:32     ` Ingo Molnar
2010-06-09  9:32     ` Ingo Molnar
2010-06-11  8:32     ` Ingo Molnar
2010-06-11  8:32       ` Ingo Molnar
2010-06-11  8:40       ` Jens Axboe
2010-06-11  8:55         ` Ingo Molnar
2010-06-11  8:55         ` Ingo Molnar
2010-06-11  8:55         ` Ingo Molnar
2010-06-11  8:55           ` Ingo Molnar
2010-06-11  9:07           ` Jens Axboe
2010-06-11  9:07           ` Jens Axboe
2010-06-11  9:18           ` Jens Axboe
2010-06-11  9:18             ` Jens Axboe
2010-06-11 19:07             ` Vivek Goyal
2010-06-11 19:07               ` Vivek Goyal
2010-06-11 19:11               ` Jens Axboe
2010-06-11 19:11                 ` Jens Axboe
2010-06-11 19:48                 ` Vivek Goyal
2010-06-11 19:48                   ` Vivek Goyal
2010-06-11 19:53                   ` Jens Axboe
2010-06-11 19:53                     ` Jens Axboe
2010-06-12 14:30                     ` Vivek Goyal
2010-06-11  8:40       ` Jens Axboe
2010-06-11  8:32     ` Ingo Molnar
2010-06-09  9:06   ` Rafael J. Wysocki
2010-06-09  9:06   ` Rafael J. Wysocki
2010-06-09  9:06     ` Rafael J. Wysocki
2010-06-09 14:24     ` Linus Torvalds
2010-06-09 14:24     ` Linus Torvalds
2010-06-09 14:24     ` Linus Torvalds
2010-06-10 22:37   ` Alex Chiang
2010-06-10 22:37     ` Alex Chiang
2010-06-09  1:53 ` Linus Torvalds
2010-06-09  9:02 ` Sedat Dilek
2010-06-09  9:02 ` Sedat Dilek
2010-06-09  9:02   ` Sedat Dilek
2010-06-09  9:22   ` Rafael J. Wysocki
2010-06-09  9:22   ` Rafael J. Wysocki
2010-06-09  9:22     ` Rafael J. Wysocki
2010-06-16 20:42     ` Andrew Morton
2010-06-16 20:42     ` Andrew Morton
2010-06-16 20:42     ` Andrew Morton
2010-06-16 20:42       ` Andrew Morton
2010-06-16 21:00       ` Sedat Dilek
2010-06-16 21:00       ` Sedat Dilek
2010-06-16 21:00         ` Sedat Dilek
2010-06-16 21:34         ` Andrew Morton
2010-06-16 21:34         ` Andrew Morton
2010-06-16 21:34         ` Andrew Morton
2010-06-09  9:22   ` Rafael J. Wysocki
2010-06-09  9:02 ` Sedat Dilek
2010-06-20 22:11 2.6.35-rc3: " Rafael J. Wysocki
2010-06-20 22:17 ` [Bug #16092] Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb Rafael J. Wysocki
2010-06-20 22:17   ` Rafael J. Wysocki

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.