* [meta-openwrt] Issues adding layer using readme instructions @ 2017-08-04 20:44 Diana Thayer 2017-08-04 21:25 ` Khem Raj 0 siblings, 1 reply; 10+ messages in thread From: Diana Thayer @ 2017-08-04 20:44 UTC (permalink / raw) To: openembedded-devel Hello! I'm experiencing issues building with meta-openwrt. Following the instructions in the readme <https://github.com/kraj/meta-openwrt>, I get this error: ``` $ bitbake-layers add-layer ../meta-openwrt NOTE: Starting bitbake server... Loading cache: 100% |############################# #####################################################################################| Time: 0:00:00 Loaded 66 entries from dependency cache. ERROR: Parse failure with the specified layer added | ETA: --:--:-- ``` What failed? Why? How do I debug it? I followed the directions step by step, both within openembedded-core and poky. Thanks for any help you can provide. Best regards, Diana ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [meta-openwrt] Issues adding layer using readme instructions 2017-08-04 20:44 [meta-openwrt] Issues adding layer using readme instructions Diana Thayer @ 2017-08-04 21:25 ` Khem Raj 2017-08-04 21:30 ` Diana Thayer 0 siblings, 1 reply; 10+ messages in thread From: Khem Raj @ 2017-08-04 21:25 UTC (permalink / raw) To: Diana Thayer, openembedded-devel Hi Diana Haven't seen anyone report this error thus far I would suggest to add the layer manually to Bblayer.conf and see how then you get better error messages during parse On Fri, Aug 4, 2017 at 1:45 PM Diana Thayer <garbados@gmail.com> wrote: > Hello! > > I'm experiencing issues building with meta-openwrt. Following the > instructions in the readme <https://github.com/kraj/meta-openwrt>, I get > this error: > > ``` > $ bitbake-layers add-layer ../meta-openwrt > NOTE: Starting bitbake server... > Loading cache: 100% |############################# > > #####################################################################################| > Time: 0:00:00 > Loaded 66 entries from dependency cache. > ERROR: Parse failure with the specified layer added > | ETA: --:--:-- > ``` > > What failed? Why? How do I debug it? I followed the directions step by > step, both within openembedded-core and poky. > > Thanks for any help you can provide. > > Best regards, > Diana > -- > _______________________________________________ > Openembedded-devel mailing list > Openembedded-devel@lists.openembedded.org > http://lists.openembedded.org/mailman/listinfo/openembedded-devel > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [meta-openwrt] Issues adding layer using readme instructions 2017-08-04 21:25 ` Khem Raj @ 2017-08-04 21:30 ` Diana Thayer 2017-08-04 21:34 ` Khem Raj 0 siblings, 1 reply; 10+ messages in thread From: Diana Thayer @ 2017-08-04 21:30 UTC (permalink / raw) To: Khem Raj; +Cc: openembedded-devel Alright. I've added it manually. I get this error: ``` ParseError at /home/garbados/openembedded-core/meta-openwrt/recipes-core/images/ openwrt-base-image.bb:5: Could not inherit file classes/image_types_uboot.bbclass ``` This is also the error Toaster gives me when trying to build the layer. On Fri, Aug 4, 2017 at 2:25 PM, Khem Raj <raj.khem@gmail.com> wrote: > Hi Diana > > Haven't seen anyone report this error thus far > I would suggest to add the layer manually to > Bblayer.conf and see how then you get better error messages during parse > > On Fri, Aug 4, 2017 at 1:45 PM Diana Thayer <garbados@gmail.com> wrote: > >> Hello! >> >> I'm experiencing issues building with meta-openwrt. Following the >> instructions in the readme <https://github.com/kraj/meta-openwrt>, I get >> this error: >> >> ``` >> $ bitbake-layers add-layer ../meta-openwrt >> NOTE: Starting bitbake server... >> Loading cache: 100% |############################# >> ############################################################ >> #########################| >> Time: 0:00:00 >> Loaded 66 entries from dependency cache. >> ERROR: Parse failure with the specified layer added >> | ETA: --:--:-- >> ``` >> >> What failed? Why? How do I debug it? I followed the directions step by >> step, both within openembedded-core and poky. >> >> Thanks for any help you can provide. >> >> Best regards, >> Diana >> -- >> _______________________________________________ >> Openembedded-devel mailing list >> Openembedded-devel@lists.openembedded.org >> http://lists.openembedded.org/mailman/listinfo/openembedded-devel >> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [meta-openwrt] Issues adding layer using readme instructions 2017-08-04 21:30 ` Diana Thayer @ 2017-08-04 21:34 ` Khem Raj 2017-08-04 21:36 ` Diana Thayer 0 siblings, 1 reply; 10+ messages in thread From: Khem Raj @ 2017-08-04 21:34 UTC (permalink / raw) To: Diana Thayer; +Cc: openembedded-devel Ok please look for this class being inherited in this layer and delete it it has been merged into image class in oe-core we should have kept an empty class in or-core for backward compatibility but that's another matter On Fri, Aug 4, 2017 at 2:30 PM Diana Thayer <garbados@gmail.com> wrote: > Alright. I've added it manually. I get this error: > > ``` > ParseError at > /home/garbados/openembedded-core/meta-openwrt/recipes-core/images/ > openwrt-base-image.bb:5: Could not inherit file > classes/image_types_uboot.bbclass > ``` > > This is also the error Toaster gives me when trying to build the layer. > > On Fri, Aug 4, 2017 at 2:25 PM, Khem Raj <raj.khem@gmail.com> wrote: > >> Hi Diana >> >> Haven't seen anyone report this error thus far >> I would suggest to add the layer manually to >> Bblayer.conf and see how then you get better error messages during parse >> >> On Fri, Aug 4, 2017 at 1:45 PM Diana Thayer <garbados@gmail.com> wrote: >> >>> Hello! >>> >>> I'm experiencing issues building with meta-openwrt. Following the >>> instructions in the readme <https://github.com/kraj/meta-openwrt>, I get >>> this error: >>> >>> ``` >>> $ bitbake-layers add-layer ../meta-openwrt >>> NOTE: Starting bitbake server... >>> Loading cache: 100% |############################# >>> >>> #####################################################################################| >>> Time: 0:00:00 >>> Loaded 66 entries from dependency cache. >>> ERROR: Parse failure with the specified layer added >>> | ETA: >>> --:--:-- >>> ``` >>> >>> What failed? Why? How do I debug it? I followed the directions step by >>> step, both within openembedded-core and poky. >>> >>> Thanks for any help you can provide. >>> >>> Best regards, >>> Diana >>> -- >>> _______________________________________________ >>> Openembedded-devel mailing list >>> Openembedded-devel@lists.openembedded.org >>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel >>> >> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [meta-openwrt] Issues adding layer using readme instructions 2017-08-04 21:34 ` Khem Raj @ 2017-08-04 21:36 ` Diana Thayer 2017-08-04 22:56 ` Khem Raj 0 siblings, 1 reply; 10+ messages in thread From: Diana Thayer @ 2017-08-04 21:36 UTC (permalink / raw) To: Khem Raj; +Cc: openembedded-devel That did the trick. Should I submit a patch to remove it? On Fri, Aug 4, 2017 at 2:34 PM, Khem Raj <raj.khem@gmail.com> wrote: > Ok please look for this class being inherited in this layer and delete it > it has been merged into image class in oe-core we should have kept an empty > class in or-core for backward compatibility but that's another matter > > On Fri, Aug 4, 2017 at 2:30 PM Diana Thayer <garbados@gmail.com> wrote: > >> Alright. I've added it manually. I get this error: >> >> ``` >> ParseError at /home/garbados/openembedded-core/meta-openwrt/recipes- >> core/images/openwrt-base-image.bb:5: Could not inherit file >> classes/image_types_uboot.bbclass >> ``` >> >> This is also the error Toaster gives me when trying to build the layer. >> >> On Fri, Aug 4, 2017 at 2:25 PM, Khem Raj <raj.khem@gmail.com> wrote: >> >>> Hi Diana >>> >>> Haven't seen anyone report this error thus far >>> I would suggest to add the layer manually to >>> Bblayer.conf and see how then you get better error messages during parse >>> >>> On Fri, Aug 4, 2017 at 1:45 PM Diana Thayer <garbados@gmail.com> wrote: >>> >>>> Hello! >>>> >>>> I'm experiencing issues building with meta-openwrt. Following the >>>> instructions in the readme <https://github.com/kraj/meta-openwrt>, I >>>> get >>>> this error: >>>> >>>> ``` >>>> $ bitbake-layers add-layer ../meta-openwrt >>>> NOTE: Starting bitbake server... >>>> Loading cache: 100% |############################# >>>> ############################################################ >>>> #########################| >>>> Time: 0:00:00 >>>> Loaded 66 entries from dependency cache. >>>> ERROR: Parse failure with the specified layer added >>>> | ETA: >>>> --:--:-- >>>> ``` >>>> >>>> What failed? Why? How do I debug it? I followed the directions step by >>>> step, both within openembedded-core and poky. >>>> >>>> Thanks for any help you can provide. >>>> >>>> Best regards, >>>> Diana >>>> -- >>>> _______________________________________________ >>>> Openembedded-devel mailing list >>>> Openembedded-devel@lists.openembedded.org >>>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel >>>> >>> >> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [meta-openwrt] Issues adding layer using readme instructions 2017-08-04 21:36 ` Diana Thayer @ 2017-08-04 22:56 ` Khem Raj 2017-08-04 23:12 ` Diana Thayer 0 siblings, 1 reply; 10+ messages in thread From: Khem Raj @ 2017-08-04 22:56 UTC (permalink / raw) To: Diana Thayer; +Cc: openembedded-devel Yes, please! On Fri, Aug 4, 2017 at 2:37 PM Diana Thayer <garbados@gmail.com> wrote: > That did the trick. Should I submit a patch to remove it? > > On Fri, Aug 4, 2017 at 2:34 PM, Khem Raj <raj.khem@gmail.com> wrote: > >> Ok please look for this class being inherited in this layer and delete it >> it has been merged into image class in oe-core we should have kept an empty >> class in or-core for backward compatibility but that's another matter >> >> On Fri, Aug 4, 2017 at 2:30 PM Diana Thayer <garbados@gmail.com> wrote: >> >>> Alright. I've added it manually. I get this error: >>> >>> ``` >>> ParseError at >>> /home/garbados/openembedded-core/meta-openwrt/recipes-core/images/ >>> openwrt-base-image.bb:5: Could not inherit file >>> classes/image_types_uboot.bbclass >>> ``` >>> >>> This is also the error Toaster gives me when trying to build the layer. >>> >>> On Fri, Aug 4, 2017 at 2:25 PM, Khem Raj <raj.khem@gmail.com> wrote: >>> >>>> Hi Diana >>>> >>>> Haven't seen anyone report this error thus far >>>> I would suggest to add the layer manually to >>>> Bblayer.conf and see how then you get better error messages during >>>> parse >>>> >>>> On Fri, Aug 4, 2017 at 1:45 PM Diana Thayer <garbados@gmail.com> wrote: >>>> >>>>> Hello! >>>>> >>>>> I'm experiencing issues building with meta-openwrt. Following the >>>>> instructions in the readme <https://github.com/kraj/meta-openwrt>, I >>>>> get >>>>> this error: >>>>> >>>>> ``` >>>>> $ bitbake-layers add-layer ../meta-openwrt >>>>> NOTE: Starting bitbake server... >>>>> Loading cache: 100% |############################# >>>>> >>>>> #####################################################################################| >>>>> Time: 0:00:00 >>>>> Loaded 66 entries from dependency cache. >>>>> ERROR: Parse failure with the specified layer added >>>>> | ETA: >>>>> --:--:-- >>>>> ``` >>>>> >>>>> What failed? Why? How do I debug it? I followed the directions step by >>>>> step, both within openembedded-core and poky. >>>>> >>>>> Thanks for any help you can provide. >>>>> >>>>> Best regards, >>>>> Diana >>>>> -- >>>>> _______________________________________________ >>>>> Openembedded-devel mailing list >>>>> Openembedded-devel@lists.openembedded.org >>>>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel >>>>> >>>> >>> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [meta-openwrt] Issues adding layer using readme instructions 2017-08-04 22:56 ` Khem Raj @ 2017-08-04 23:12 ` Diana Thayer 2017-08-05 0:04 ` Andreas Müller 0 siblings, 1 reply; 10+ messages in thread From: Diana Thayer @ 2017-08-04 23:12 UTC (permalink / raw) To: Khem Raj; +Cc: openembedded-devel Great! Here's the PR <https://github.com/kraj/meta-openwrt/pull/22>. Attempting to run `TCLIBC=musl MACHINE=qemux86 bitbake core-image-sato` still fails with this error: ``` ERROR: iptables-1.6.1-r0 do_patch: Command Error: 'quilt --quiltrc /home/garbados/openembedded-core/build/tmp-musl/work/i586-oe-linux-musl/iptables/1.6.1-r0/recipe-sysroot-native/etc/quiltrc push' exited with 0 Output: Applying patch 600-shared-libext.patch patching file extensions/GNUmakefile.in Hunk #1 succeeded at 50 (offset 1 line). Hunk #2 succeeded at 87 (offset 1 line). Hunk #3 succeeded at 114 (offset 1 line). Hunk #4 succeeded at 123 (offset 1 line). Hunk #5 succeeded at 146 (offset 1 line). patching file iptables/Makefile.am Hunk #1 succeeded at 8 (offset 2 lines). Hunk #2 FAILED at 15. Hunk #3 FAILED at 42. 2 out of 3 hunks FAILED -- rejects in file iptables/Makefile.am Patch 600-shared-libext.patch does not apply (enforce with -f) ERROR: iptables-1.6.1-r0 do_patch: Function failed: patch_do_patch ERROR: Logfile of failure stored in: /home/garbados/openembedded-core/build/tmp-musl/work/i586-oe-linux-musl/iptables/1.6.1-r0/temp/log.do_patch.21478 ERROR: Task (/home/garbados/openembedded-core/meta/recipes-extended/iptables/iptables_1.6.1.bb:do_patch) failed with exit code '1' ``` Like before, I'm not sure how to handle it. On Fri, Aug 4, 2017 at 3:56 PM, Khem Raj <raj.khem@gmail.com> wrote: > Yes, please! > > On Fri, Aug 4, 2017 at 2:37 PM Diana Thayer <garbados@gmail.com> wrote: > >> That did the trick. Should I submit a patch to remove it? >> >> On Fri, Aug 4, 2017 at 2:34 PM, Khem Raj <raj.khem@gmail.com> wrote: >> >>> Ok please look for this class being inherited in this layer and delete >>> it it has been merged into image class in oe-core we should have kept an >>> empty class in or-core for backward compatibility but that's another matter >>> >>> On Fri, Aug 4, 2017 at 2:30 PM Diana Thayer <garbados@gmail.com> wrote: >>> >>>> Alright. I've added it manually. I get this error: >>>> >>>> ``` >>>> ParseError at /home/garbados/openembedded-core/meta-openwrt/recipes- >>>> core/images/openwrt-base-image.bb:5: Could not inherit file >>>> classes/image_types_uboot.bbclass >>>> ``` >>>> >>>> This is also the error Toaster gives me when trying to build the layer. >>>> >>>> On Fri, Aug 4, 2017 at 2:25 PM, Khem Raj <raj.khem@gmail.com> wrote: >>>> >>>>> Hi Diana >>>>> >>>>> Haven't seen anyone report this error thus far >>>>> I would suggest to add the layer manually to >>>>> Bblayer.conf and see how then you get better error messages during >>>>> parse >>>>> >>>>> On Fri, Aug 4, 2017 at 1:45 PM Diana Thayer <garbados@gmail.com> >>>>> wrote: >>>>> >>>>>> Hello! >>>>>> >>>>>> I'm experiencing issues building with meta-openwrt. Following the >>>>>> instructions in the readme <https://github.com/kraj/meta-openwrt>, I >>>>>> get >>>>>> this error: >>>>>> >>>>>> ``` >>>>>> $ bitbake-layers add-layer ../meta-openwrt >>>>>> NOTE: Starting bitbake server... >>>>>> Loading cache: 100% |############################# >>>>>> ############################################################ >>>>>> #########################| >>>>>> Time: 0:00:00 >>>>>> Loaded 66 entries from dependency cache. >>>>>> ERROR: Parse failure with the specified layer added >>>>>> | ETA: >>>>>> --:--:-- >>>>>> ``` >>>>>> >>>>>> What failed? Why? How do I debug it? I followed the directions step by >>>>>> step, both within openembedded-core and poky. >>>>>> >>>>>> Thanks for any help you can provide. >>>>>> >>>>>> Best regards, >>>>>> Diana >>>>>> -- >>>>>> _______________________________________________ >>>>>> Openembedded-devel mailing list >>>>>> Openembedded-devel@lists.openembedded.org >>>>>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel >>>>>> >>>>> >>>> >> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [meta-openwrt] Issues adding layer using readme instructions 2017-08-04 23:12 ` Diana Thayer @ 2017-08-05 0:04 ` Andreas Müller 2017-08-11 20:13 ` Diana Thayer 0 siblings, 1 reply; 10+ messages in thread From: Andreas Müller @ 2017-08-05 0:04 UTC (permalink / raw) To: Diana Thayer; +Cc: openembedded-devel On Sat, Aug 5, 2017 at 1:12 AM, Diana Thayer <garbados@gmail.com> wrote: > Great! Here's the PR <https://github.com/kraj/meta-openwrt/pull/22>. > > Attempting to run `TCLIBC=musl MACHINE=qemux86 bitbake core-image-sato` > still fails with this error: > > ``` > ERROR: iptables-1.6.1-r0 do_patch: Command Error: 'quilt --quiltrc > /home/garbados/openembedded-core/build/tmp-musl/work/i586-oe-linux-musl/iptables/1.6.1-r0/recipe-sysroot-native/etc/quiltrc > push' exited with 0 Output: > Applying patch 600-shared-libext.patch > patching file extensions/GNUmakefile.in > Hunk #1 succeeded at 50 (offset 1 line). > Hunk #2 succeeded at 87 (offset 1 line). > Hunk #3 succeeded at 114 (offset 1 line). > Hunk #4 succeeded at 123 (offset 1 line). > Hunk #5 succeeded at 146 (offset 1 line). > patching file iptables/Makefile.am > Hunk #1 succeeded at 8 (offset 2 lines). > Hunk #2 FAILED at 15. > Hunk #3 FAILED at 42. > 2 out of 3 hunks FAILED -- rejects in file iptables/Makefile.am > Patch 600-shared-libext.patch does not apply (enforce with -f) 600-shared-libext.patch does not apply any more. It is part of meta-openwrt [1]. Have no idea what this patch is trying to fix/enhance - Khem? [1] https://github.com/kraj/meta-openwrt/blob/master/recipes-tweaks/iptables/iptables/600-shared-libext.patch Andreas ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [meta-openwrt] Issues adding layer using readme instructions 2017-08-05 0:04 ` Andreas Müller @ 2017-08-11 20:13 ` Diana Thayer 2017-08-11 21:10 ` Khem Raj 0 siblings, 1 reply; 10+ messages in thread From: Diana Thayer @ 2017-08-11 20:13 UTC (permalink / raw) To: Andreas Müller; +Cc: openembedded-devel > 600-shared-libext.patch does not apply any more. It is part of meta-openwrt [1]. Have no idea what this patch is trying to fix/enhance - Khem? This is still blocking efforts to build with meta-openwrt. Any ideas? On Fri, Aug 4, 2017 at 5:04 PM, Andreas Müller <schnitzeltony@googlemail.com > wrote: > On Sat, Aug 5, 2017 at 1:12 AM, Diana Thayer <garbados@gmail.com> wrote: > > Great! Here's the PR <https://github.com/kraj/meta-openwrt/pull/22>. > > > > Attempting to run `TCLIBC=musl MACHINE=qemux86 bitbake core-image-sato` > > still fails with this error: > > > > ``` > > ERROR: iptables-1.6.1-r0 do_patch: Command Error: 'quilt --quiltrc > > /home/garbados/openembedded-core/build/tmp-musl/work/i586- > oe-linux-musl/iptables/1.6.1-r0/recipe-sysroot-native/etc/quiltrc > > push' exited with 0 Output: > > Applying patch 600-shared-libext.patch > > patching file extensions/GNUmakefile.in > > Hunk #1 succeeded at 50 (offset 1 line). > > Hunk #2 succeeded at 87 (offset 1 line). > > Hunk #3 succeeded at 114 (offset 1 line). > > Hunk #4 succeeded at 123 (offset 1 line). > > Hunk #5 succeeded at 146 (offset 1 line). > > patching file iptables/Makefile.am > > Hunk #1 succeeded at 8 (offset 2 lines). > > Hunk #2 FAILED at 15. > > Hunk #3 FAILED at 42. > > 2 out of 3 hunks FAILED -- rejects in file iptables/Makefile.am > > Patch 600-shared-libext.patch does not apply (enforce with -f) > 600-shared-libext.patch does not apply any more. It is part of > meta-openwrt [1]. Have no idea what this patch is trying to > fix/enhance - Khem? > > [1] https://github.com/kraj/meta-openwrt/blob/master/recipes- > tweaks/iptables/iptables/600-shared-libext.patch > > Andreas > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [meta-openwrt] Issues adding layer using readme instructions 2017-08-11 20:13 ` Diana Thayer @ 2017-08-11 21:10 ` Khem Raj 0 siblings, 0 replies; 10+ messages in thread From: Khem Raj @ 2017-08-11 21:10 UTC (permalink / raw) To: Diana Thayer; +Cc: openembedded-devel On Fri, Aug 11, 2017 at 1:13 PM, Diana Thayer <garbados@gmail.com> wrote: >> 600-shared-libext.patch does not apply any more. It is part of > meta-openwrt [1]. Have no idea what this patch is trying to > fix/enhance - Khem? > > This is still blocking efforts to build with meta-openwrt. Any ideas? > you can disable it for now. It will need forward porting to current version of iptables which is preferred solution > On Fri, Aug 4, 2017 at 5:04 PM, Andreas Müller > <schnitzeltony@googlemail.com> wrote: >> >> On Sat, Aug 5, 2017 at 1:12 AM, Diana Thayer <garbados@gmail.com> wrote: >> > Great! Here's the PR <https://github.com/kraj/meta-openwrt/pull/22>. >> > >> > Attempting to run `TCLIBC=musl MACHINE=qemux86 bitbake core-image-sato` >> > still fails with this error: >> > >> > ``` >> > ERROR: iptables-1.6.1-r0 do_patch: Command Error: 'quilt --quiltrc >> > >> > /home/garbados/openembedded-core/build/tmp-musl/work/i586-oe-linux-musl/iptables/1.6.1-r0/recipe-sysroot-native/etc/quiltrc >> > push' exited with 0 Output: >> > Applying patch 600-shared-libext.patch >> > patching file extensions/GNUmakefile.in >> > Hunk #1 succeeded at 50 (offset 1 line). >> > Hunk #2 succeeded at 87 (offset 1 line). >> > Hunk #3 succeeded at 114 (offset 1 line). >> > Hunk #4 succeeded at 123 (offset 1 line). >> > Hunk #5 succeeded at 146 (offset 1 line). >> > patching file iptables/Makefile.am >> > Hunk #1 succeeded at 8 (offset 2 lines). >> > Hunk #2 FAILED at 15. >> > Hunk #3 FAILED at 42. >> > 2 out of 3 hunks FAILED -- rejects in file iptables/Makefile.am >> > Patch 600-shared-libext.patch does not apply (enforce with -f) >> 600-shared-libext.patch does not apply any more. It is part of >> meta-openwrt [1]. Have no idea what this patch is trying to >> fix/enhance - Khem? >> >> [1] >> https://github.com/kraj/meta-openwrt/blob/master/recipes-tweaks/iptables/iptables/600-shared-libext.patch >> >> Andreas > > ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2017-08-11 21:11 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-08-04 20:44 [meta-openwrt] Issues adding layer using readme instructions Diana Thayer 2017-08-04 21:25 ` Khem Raj 2017-08-04 21:30 ` Diana Thayer 2017-08-04 21:34 ` Khem Raj 2017-08-04 21:36 ` Diana Thayer 2017-08-04 22:56 ` Khem Raj 2017-08-04 23:12 ` Diana Thayer 2017-08-05 0:04 ` Andreas Müller 2017-08-11 20:13 ` Diana Thayer 2017-08-11 21:10 ` Khem Raj
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.