* 3.10-rc1 system starts regular boot when waking from s2ram
@ 2013-05-14 16:01 Michal Hocko
2013-05-14 20:09 ` Rafael J. Wysocki
` (3 more replies)
0 siblings, 4 replies; 38+ messages in thread
From: Michal Hocko @ 2013-05-14 16:01 UTC (permalink / raw)
To: linux-pm; +Cc: Len Brown, Pavel Machek, Rafael J. Wysocki, LKML
[-- Attachment #1: Type: text/plain, Size: 3240 bytes --]
Hi,
I am not able to make my system wake up from s2ram with 3.10-rc1. The
system simply starts booting as if it wasn't suspended. 3.9 works
without any issues.
pm_test testing (with no_console_suspend) shows that platform is the
last mode which wakes up normally. processors mode already starts with a
regular boot. The log doesn't say anything interesting:
$ echo processors > /sys/power/pm_test
$ echo mem > /sys/power/state
[ 61.012533] PM: Syncing filesystems ... done.
[ 61.017944] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 61.033050] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 61.081647] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 61.081724] sd 0:0:0:0: [sda] Stopping disk
then it waits for 5s as expected and starts booting from scratch without
anything in the log.
Same test with
$ echo platform > /sys/power/pm_test
$ echo mem > /sys/power/state
[ 34.960477] PM: Syncing filesystems ... done.
[ 34.967624] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 34.983936] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 35.056655] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 35.056800] sd 0:0:0:0: [sda] Stopping disk
[ 41.255957] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 41.316267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 41.316354] ata5: SATA link down (SStatus 0 SControl 300)
[ 41.316428] ata4: SATA link down (SStatus 0 SControl 300)
[ 41.316507] ata6: SATA link down (SStatus 0 SControl 300)
[ 41.316958] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 41.388315] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 41.389142] ata1.00: configured for UDMA/133
[ 41.391172] ata2.00: configured for UDMA/100
[ 41.396198] sd 0:0:0:0: [sda] Starting disk
[ 41.396533] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 41.396767] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
[ 41.638698] PM: resume of devices complete after 724.548 msecs
[ 41.638835] Restarting tasks ... done.
[ 41.640747] video LNXVIDEO:00: Restoring backlight state
[ 42.848988] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 42.850380] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
[ 42.850380] TDH <0>
[ 42.850380] TDT <11>
[ 42.850380] next_to_use <11>
[ 42.850380] next_to_clean <0>
[ 42.850380] buffer_info[next_to_clean]:
[ 42.850380] time_stamp <ffff034b>
[ 42.850380] next_to_watch <0>
[ 42.850380] jiffies <ffff04d9>
[ 42.850380] next_to_watch.status <0>
[ 42.850380] MAC Status <80000>
[ 42.850380] PHY Status <7949>
[ 42.850380] PHY 1000BASE-T Status <0>
[ 42.850380] PHY Extended Status <3000>
[ 42.850380] PCI Status <10>
[ 44.066855] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Is the issue known? Can I provide more information to help with
debugging this issue. I am quite busy to bisect this ATM but can do it
if this is the only choice left.
Thanks
--
Michal Hocko
SUSE Labs
[-- Attachment #2: config-3.10.0-rc1-fullnohzdisabled --]
[-- Type: text/plain, Size: 82837 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.10.0-rc1-fullnohzdisabled Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ALWAYS_USE_PERSISTENT_CLOCK=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_RCU_USER_QS=y
CONFIG_CONTEXT_TRACKING_FORCE=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_KMEM=y
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_UIDGID_CONVERTED=y
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HOTPLUG=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_MICROCODE_INTEL_LIB=y
CONFIG_MICROCODE_INTEL_EARLY=y
CONFIG_MICROCODE_EARLY=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_I2C=m
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
# CONFIG_IP_NF_MATCH_RPFILTER is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
# CONFIG_NF_NAT_IPV4 is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_VMWARE_VMCI is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_HIGHBANK is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_MII is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
# CONFIG_VHOST_NET is not set
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
CONFIG_NET_CADENCE=y
# CONFIG_ARM_AT91_ETHER is not set
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=y
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_NET_VENDOR_I825XX is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_CARDS is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLDVM=m
# CONFIG_IWLMVM is not set
CONFIG_IWLWIFI_OPMODE_MODULAR=y
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLWIFI_P2P=y
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTLWIFI is not set
# CONFIG_WL_TI is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# Qualcomm MSM SSBI bus support
#
# CONFIG_SSBI is not set
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
# CONFIG_VIDEO_V4L2_INT_DEVICE is not set
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_USB_SN9C102 is not set
#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
# CONFIG_CYPRESS_FIRMWARE is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Miscelaneous helper chips
#
#
# Sensors used on soc_camera driver
#
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_HDMI=y
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=60
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_OSS is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_PS3REMOTE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THINGM is not set
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_PHY is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ACPI=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_CHROMEOS_LAPTOP is not set
CONFIG_DELL_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_PVPANIC is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
# CONFIG_AMD_IOMMU is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SMB2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU_DELAY is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_LOW_LEVEL_TRAP is not set
# CONFIG_KGDB_KDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_BLOWFISH_AVX2_X86_64 is not set
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_AVX2_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_OID_REGISTRY=y
[-- Attachment #3: dmesg-3.10.0-rc1-fullnohzdisabled --]
[-- Type: text/plain, Size: 51319 bytes --]
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.10.0-rc1-fullnohzdisabled (root@tiehlicka) (gcc version 4.7.3 (Debian 4.7.3-4) ) #149 SMP PREEMPT Mon May 13 13:26:26 CEST 2013
[ 0.000000] Command line: root=UUID=ca09430c-6e28-44af-a30e-79fe3c80e9f9 ro craskernel=256M@16M resume=/dev/sda8 netconsole=@10.100.13.132/eth0,@10.100.13.54/00:19:D1:E4:E8:5A no_console_suspend loglevel=7
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009a800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000caa28fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000caa29000-0x00000000caa6cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caa6d000-0x00000000cadb6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cadb7000-0x00000000cade6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cade7000-0x00000000cafe6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafe7000-0x00000000caffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. Latitude E6320/09PHH9, BIOS A08 10/18/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x12e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0C8000000 mask FFC000000 write-back
[ 0.000000] 4 base 0CB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FE0000000 write-back
[ 0.000000] 6 base 120000000 mask FF0000000 write-back
[ 0.000000] 7 base 12E000000 mask FFE000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f1ad0-0x000f1adf] mapped at [ffff8800000f1ad0]
[ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01c99000, 0x01c99fff] PGTABLE
[ 0.000000] BRK [0x01c9a000, 0x01c9afff] PGTABLE
[ 0.000000] BRK [0x01c9b000, 0x01c9bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12de00000-0x12dffffff]
[ 0.000000] [mem 0x12de00000-0x12dffffff] page 4k
[ 0.000000] BRK [0x01c9c000, 0x01c9cfff] PGTABLE
[ 0.000000] BRK [0x01c9d000, 0x01c9dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12ddfffff]
[ 0.000000] [mem 0x12c000000-0x12ddfffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x1fffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xcaa28fff]
[ 0.000000] [mem 0x40200000-0xcaa28fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcaa6d000-0xcadb6fff]
[ 0.000000] [mem 0xcaa6d000-0xcadb6fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x1fd69000-0x1ffeffff]
[ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000caffde18 00074 (v01 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130328/tbfadt-395)
[ 0.000000] ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40, using 32 (20130328/tbfadt-522)
[ 0.000000] ACPI: DSDT 00000000caf66018 08461 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
[ 0.000000] ACPI: FACS 00000000cafe4e40 00040
[ 0.000000] ACPI: APIC 00000000caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: TCPA 00000000cafe5d18 00032 (v02 00000000 00000000)
[ 0.000000] ACPI: SSDT 00000000caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
[ 0.000000] ACPI: MCFG 00000000cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
[ 0.000000] ACPI: BOOT 00000000cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000caf7d018 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
[ 0.000000] ACPI: SSDT 00000000caf7c018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903)
[ 0.000000] ACPI: SLIC 00000000caf86c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880129000000-ffff88012cffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12dffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00099fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xcaa28fff]
[ 0.000000] node 0: [mem 0xcaa6d000-0xcadb6fff]
[ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x12dffffff]
[ 0.000000] On node 0 totalpages: 1018125
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 153 pages reserved
[ 0.000000] DMA zone: 3993 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12902 pages used for memmap
[ 0.000000] DMA32 zone: 825716 pages, LIFO batch:31
[ 0.000000] Normal zone: 2944 pages used for memmap
[ 0.000000] Normal zone: 188416 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000caa29000 - 00000000caa6d000
[ 0.000000] PM: Registered nosave memory: 00000000cadb7000 - 00000000cade7000
[ 0.000000] PM: Registered nosave memory: 00000000cade7000 - 00000000cafe7000
[ 0.000000] PM: Registered nosave memory: 00000000cafe7000 - 00000000cafff000
[ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
[ 0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
[ 0.000000] e820: [mem 0xcb000000-0xfed1bfff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012d400000 s80128 r8192 d22272 u262144
[ 0.000000] pcpu-alloc: s80128 r8192 d22272 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1002062
[ 0.000000] Kernel command line: root=UUID=ca09430c-6e28-44af-a30e-79fe3c80e9f9 ro craskernel=256M@16M resume=/dev/sda8 netconsole=@10.100.13.132/eth0,@10.100.13.54/00:19:D1:E4:E8:5A no_console_suspend loglevel=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3909568k/4947968k available (4656k kernel code, 875468k absent, 162932k reserved, 6235k data, 1004k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] Experimental no-CBs for all CPUs
[ 0.000000] Experimental no-CBs CPUs: 0-7.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2593.891 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.78 BogoMIPS (lpj=10375564)
[ 0.000191] pid_max: default: 32768 minimum: 301
[ 0.000341] Mount-cache hash table entries: 256
[ 0.000626] Initializing cgroup subsys memory
[ 0.000749] CPU: Physical Processor ID: 0
[ 0.000852] CPU: Processor Core ID: 0
[ 0.000947] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.001104] mce: CPU supports 7 MCE banks
[ 0.001205] CPU0: Thermal monitoring enabled (TM1)
[ 0.001305] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.001305] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.001305] tlb_flushall_shift: 5
[ 0.001598] debug: unmapping init [mem 0xffffffff81b9f000-0xffffffff81ba3fff]
[ 0.001707] ACPI: Core revision 20130328
[ 0.009580] ACPI: All ACPI Tables successfully acquired
[ 0.010544] ftrace: allocating 21903 entries in 86 pages
[ 0.021836] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061642] smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz (fam: 06, model: 2a, stepping: 07)
[ 0.061911] TSC deadline timer enabled
[ 0.061921] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.062225] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.062373] ... version: 3
[ 0.062466] ... bit width: 48
[ 0.062560] ... generic registers: 8
[ 0.062652] ... value mask: 0000ffffffffffff
[ 0.062747] ... max period: 000000007fffffff
[ 0.062842] ... fixed-purpose events: 3
[ 0.062935] ... event mask: 00000007000000ff
[ 0.086065] smpboot: Booting Node 0, Processors #1
[ 0.099316] Brought up 2 CPUs
[ 0.099496] smpboot: Total of 2 processors activated (10375.56 BogoMIPS)
[ 0.101767] PM: Registering ACPI NVS region [mem 0xcade7000-0xcafe6fff] (2097152 bytes)
[ 0.101991] reboot: PCI series board detected. Selecting Dell Latitude E6320-method for reboots.
[ 0.103132] NET: Registered protocol family 16
[ 0.103560] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.103707] ACPI: bus type PCI registered
[ 0.103818] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.103968] PCI: not using MMCONFIG
[ 0.104061] PCI: Using configuration type 1 for base access
[ 0.104163] dmi type 0xB1 record - unknown flag
[ 0.109188] bio: create slab <bio-0> at 0
[ 0.109390] ACPI: Added _OSI(Module Device)
[ 0.109485] ACPI: Added _OSI(Processor Device)
[ 0.109579] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.109674] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.111161] ACPI: EC: Look up EC in DSDT
[ 0.116748] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.220039] ACPI: SSDT 00000000cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
[ 0.220651] ACPI: Dynamic OEM Table Load:
[ 0.220821] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
[ 0.227929] ACPI: SSDT 00000000cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
[ 0.228598] ACPI: Dynamic OEM Table Load:
[ 0.228768] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
[ 0.235647] ACPI: SSDT 00000000cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
[ 0.236233] ACPI: Dynamic OEM Table Load:
[ 0.236403] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
[ 0.291751] ACPI: Interpreter enabled
[ 0.291850] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[ 0.292078] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[ 0.292317] ACPI: (supports S0 S3 S4 S5)
[ 0.292411] ACPI: Using IOAPIC for interrupt routing
[ 0.292529] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.293224] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.296656] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.030226] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.030381] \_SB_.PCI0:_OSC invalid UUID
[ 1.030382] _OSC request data:1 8 0
[ 1.031402] PCI host bridge to bus 0000:00
[ 1.031498] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.031594] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.031691] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.031788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.031887] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
[ 1.031985] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 1.032090] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.032211] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 1.032222] pci 0000:00:02.0: reg 10: [mem 0xe1400000-0xe17fffff 64bit]
[ 1.032228] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.032233] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 1.032367] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.032392] pci 0000:00:16.0: reg 10: [mem 0xe2eb0000-0xe2eb000f 64bit]
[ 1.032469] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.032580] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[ 1.032600] pci 0000:00:16.3: reg 10: [io 0x40e0-0x40e7]
[ 1.032610] pci 0000:00:16.3: reg 14: [mem 0xe2e90000-0xe2e90fff]
[ 1.032795] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 1.032815] pci 0000:00:19.0: reg 10: [mem 0xe2e00000-0xe2e1ffff]
[ 1.032824] pci 0000:00:19.0: reg 14: [mem 0xe2e80000-0xe2e80fff]
[ 1.032833] pci 0000:00:19.0: reg 18: [io 0x4080-0x409f]
[ 1.032896] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.052859] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 1.053022] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.053047] pci 0000:00:1a.0: reg 10: [mem 0xe2e70000-0xe2e703ff]
[ 1.053139] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.053203] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.053364] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.053382] pci 0000:00:1b.0: reg 10: [mem 0xe2e60000-0xe2e63fff 64bit]
[ 1.053451] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.053478] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.053630] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.053761] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.053803] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.053952] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 1.054082] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.054129] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 1.054279] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 1.054409] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.054470] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 1.054623] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 1.054753] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.054797] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.054948] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 1.055080] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.055128] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 1.055281] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.055304] pci 0000:00:1d.0: reg 10: [mem 0xe2e50000-0xe2e503ff]
[ 1.055394] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.055458] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.055608] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 1.055779] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.055799] pci 0000:00:1f.2: reg 10: [io 0x40d0-0x40d7]
[ 1.055807] pci 0000:00:1f.2: reg 14: [io 0x40c0-0x40c3]
[ 1.055816] pci 0000:00:1f.2: reg 18: [io 0x40b0-0x40b7]
[ 1.055824] pci 0000:00:1f.2: reg 1c: [io 0x40a0-0x40a3]
[ 1.055832] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 1.055841] pci 0000:00:1f.2: reg 24: [mem 0xe2e40000-0xe2e407ff]
[ 1.055886] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.055982] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.055999] pci 0000:00:1f.3: reg 10: [mem 0xe2e30000-0xe2e300ff 64bit]
[ 1.056020] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
[ 1.056228] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.056598] pci 0000:02:00.0: [8086:422b] type 00 class 0x028000
[ 1.056767] pci 0000:02:00.0: reg 10: [mem 0xe2d00000-0xe2d01fff 64bit]
[ 1.057470] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.057595] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 1.057732] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.057835] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff]
[ 1.057944] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
[ 1.058044] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 1.058050] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff]
[ 1.058058] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
[ 1.058159] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 1.058258] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1.058264] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff]
[ 1.058273] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 1.060120] pci 0000:0a:00.0: [1217:8221] type 00 class 0x080501
[ 1.060165] pci 0000:0a:00.0: reg 10: [mem 0xe2c00000-0xe2c001ff]
[ 1.060488] pci 0000:0a:00.0: supports D1 D2
[ 1.060490] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.060546] pci 0000:0a:00.0: System wakeup disabled by ACPI
[ 1.060681] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[ 1.060786] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff]
[ 1.060827] pci_bus 0000:00: on NUMA node 0
[ 1.060892] \_SB_.PCI0:_OSC invalid UUID
[ 1.060893] _OSC request data:1 19 0
[ 1.060897] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.061046] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.125207] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.125924] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.126641] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.127358] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.128073] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 1.128702] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.129465] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 1.130095] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.209725] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 1.209903] acpi root: \_SB_.PCI0 notify handler is installed
[ 1.209958] Found 1 acpi root devices
[ 1.210041] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
[ 1.273264] ACPI: No dock devices found.
[ 1.273455] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.273606] vgaarb: loaded
[ 1.273697] vgaarb: bridge control possible 0000:00:02.0
[ 1.273924] SCSI subsystem initialized
[ 1.274018] ACPI: bus type ATA registered
[ 1.274208] libata version 3.00 loaded.
[ 1.274214] ACPI: bus type USB registered
[ 1.274366] usbcore: registered new interface driver usbfs
[ 1.274490] usbcore: registered new interface driver hub
[ 1.274625] usbcore: registered new device driver usb
[ 1.274794] pps_core: LinuxPPS API ver. 1 registered
[ 1.274890] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.275060] PTP clock support registered
[ 1.275221] PCI: Using ACPI for IRQ routing
[ 1.276922] PCI: pci_cache_line_size set to 64 bytes
[ 1.278740] e820: reserve RAM buffer [mem 0x0009a800-0x0009ffff]
[ 1.278742] e820: reserve RAM buffer [mem 0xcaa29000-0xcbffffff]
[ 1.278744] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
[ 1.278746] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 1.278747] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
[ 1.278990] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.279433] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.281540] Switching to clocksource hpet
[ 1.286249] pnp: PnP ACPI init
[ 1.286351] ACPI: bus type PNP registered
[ 1.286488] pnp 00:00: [dma 4]
[ 1.286540] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.286595] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.286772] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 1.286871] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 1.286935] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.287010] system 00:04: [io 0x0680-0x069f] has been reserved
[ 1.287108] system 00:04: [io 0x1000-0x100f] has been reserved
[ 1.287205] system 00:04: [io 0xffff] has been reserved
[ 1.287301] system 00:04: [io 0xffff] has been reserved
[ 1.287397] system 00:04: [io 0x0400-0x047f] has been reserved
[ 1.287496] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.287593] system 00:04: [io 0x164e-0x164f] has been reserved
[ 1.287691] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.287747] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.287808] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.393929] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 1.393995] pnp 00:08: Plug and Play ACPI device, IDs DLL0492 PNP0f13 (active)
[ 1.394090] pnp 00:09: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)
[ 1.394349] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.394449] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.394546] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.394644] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.394743] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.394841] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.394939] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.395038] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.395136] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.395235] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.395334] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.453968] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 1.610455] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[ 1.610556] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
[ 1.610656] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.610667] pnp: PnP ACPI: found 13 devices
[ 1.610760] ACPI: bus type PNP unregistered
[ 1.618437] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.618550] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.618650] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff]
[ 1.618759] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
[ 1.618856] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 1.618958] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff]
[ 1.619060] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
[ 1.619215] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 1.619311] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1.619413] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff]
[ 1.619515] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[ 1.619668] pci 0000:00:1c.5: PCI bridge to [bus 0a]
[ 1.619769] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff]
[ 1.620392] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.620394] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.620396] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.620398] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
[ 1.620400] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 1.620402] pci_bus 0000:02: resource 1 [mem 0xe2d00000-0xe2dfffff]
[ 1.620404] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 1.620406] pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe2bfffff]
[ 1.620408] pci_bus 0000:03: resource 2 [mem 0xe0a00000-0xe13fffff 64bit pref]
[ 1.620410] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 1.620412] pci_bus 0000:09: resource 1 [mem 0xe1800000-0xe21fffff]
[ 1.620414] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
[ 1.620416] pci_bus 0000:0a: resource 1 [mem 0xe2c00000-0xe2cfffff]
[ 1.620451] NET: Registered protocol family 2
[ 1.620687] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.620934] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.621120] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.621237] TCP: reno registered
[ 1.621333] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.621443] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.621595] NET: Registered protocol family 1
[ 1.621781] RPC: Registered named UNIX socket transport module.
[ 1.621891] RPC: Registered udp transport module.
[ 1.621985] RPC: Registered tcp transport module.
[ 1.622079] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.622183] pci 0000:00:02.0: Boot video device
[ 1.624383] PCI: CLS 64 bytes, default 64
[ 1.624419] Trying to unpack rootfs image as initramfs...
[ 1.667619] debug: unmapping init [mem 0xffff88001fd69000-0xffff88001ffeffff]
[ 1.667777] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.667876] software IO TLB [mem 0xc6a29000-0xcaa29000] (64MB) mapped at [ffff8800c6a29000-ffff8800caa28fff]
[ 1.668104] Simple Boot Flag at 0xf3 set to 0x1
[ 1.668628] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
[ 1.668727] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
[ 1.668865] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.694349] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.698281] NFS: Registering the id_resolver key type
[ 1.698384] Key type id_resolver registered
[ 1.698479] Key type id_legacy registered
[ 1.698633] msgmni has been set to 7635
[ 1.700338] io scheduler noop registered
[ 1.700433] io scheduler deadline registered
[ 1.700582] io scheduler cfq registered (default)
[ 1.701725] ACPI: AC Adapter [AC] (on-line)
[ 1.702335] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.703163] ACPI: Lid Switch [LID]
[ 1.703318] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.703467] ACPI: Power Button [PBTN]
[ 1.703622] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.703771] ACPI: Sleep Button [SBTN]
[ 1.703924] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.704071] ACPI: Power Button [PWRF]
[ 1.704298] ACPI: Requesting acpi_cpufreq
[ 1.704935] Monitor-Mwait will be used to enter C-1 state
[ 1.704941] Monitor-Mwait will be used to enter C-2 state
[ 1.704945] Monitor-Mwait will be used to enter C-3 state
[ 1.704955] ACPI: acpi_idle registered with cpuidle
[ 2.106292] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.106390] ACPI: Thermal Zone [THM] (25 C)
[ 2.121802] ACPI: Battery Slot [BAT0] (battery present)
[ 2.135935] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.206811] 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A
[ 2.222595] Linux agpgart interface v0.103
[ 2.224494] brd: module loaded
[ 2.225471] loop: module loaded
[ 2.225565] Uniform Multi-Platform E-IDE driver
[ 2.225778] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 2.225936] Probing IDE interface ide0...
[ 2.306844] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.378875] ACPI: Battery Slot [BAT2] (battery absent)
[ 2.666574] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[ 2.666693] Switching to clocksource tsc
[ 2.786741] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.786887] Probing IDE interface ide1...
[ 3.347100] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.347238] ide-gd driver 1.18
[ 3.347356] ide-cd driver 5.00
[ 3.347648] ahci 0000:00:1f.2: version 3.0
[ 3.347792] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 3.347824] ahci: SSS flag set, parallel bus scan disabled
[ 3.363060] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
[ 3.363223] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.363376] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.395752] scsi0 : ahci
[ 3.395950] scsi1 : ahci
[ 3.396131] scsi2 : ahci
[ 3.396310] scsi3 : ahci
[ 3.396489] scsi4 : ahci
[ 3.396667] scsi5 : ahci
[ 3.396831] ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 40
[ 3.396980] ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 40
[ 3.397126] ata3: DUMMY
[ 3.397218] ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 40
[ 3.397364] ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 40
[ 3.397512] ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 40
[ 3.397808] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.397905] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 3.398134] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.398187] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.398353] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 3.595196] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 3.595293] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:4e:b6:e1
[ 3.595441] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.595586] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 2041FF-0FF
[ 3.595716] sky2: driver version 1.30
[ 3.595914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.596012] ehci-pci: EHCI PCI platform driver
[ 3.596228] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 3.596237] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.596373] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.596531] ehci-pci 0000:00:1a.0: debug port 2
[ 3.600523] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.600539] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe2e70000
[ 3.611193] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.611337] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.611436] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.611582] usb usb1: Product: EHCI Host Controller
[ 3.611677] usb usb1: Manufacturer: Linux 3.10.0-rc1-fullnohzdisabled ehci_hcd
[ 3.611823] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.612030] hub 1-0:1.0: USB hub found
[ 3.612127] hub 1-0:1.0: 3 ports detected
[ 3.612400] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 3.612406] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.612549] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.612707] ehci-pci 0000:00:1d.0: debug port 2
[ 3.616708] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.616722] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe2e50000
[ 3.627202] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.627342] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.627440] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.627588] usb usb2: Product: EHCI Host Controller
[ 3.627683] usb usb2: Manufacturer: Linux 3.10.0-rc1-fullnohzdisabled ehci_hcd
[ 3.627829] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.628026] hub 2-0:1.0: USB hub found
[ 3.628122] hub 2-0:1.0: 3 ports detected
[ 3.628307] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.628435] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.628604] usbcore: registered new interface driver usb-storage
[ 3.628725] usbcore: registered new interface driver ums-alauda
[ 3.628848] usbcore: registered new interface driver ums-datafab
[ 3.628976] usbcore: registered new interface driver ums-freecom
[ 3.629099] usbcore: registered new interface driver ums-isd200
[ 3.629221] usbcore: registered new interface driver ums-jumpshot
[ 3.629345] usbcore: registered new interface driver ums-karma
[ 3.629467] usbcore: registered new interface driver ums-sddr09
[ 3.629589] usbcore: registered new interface driver ums-sddr55
[ 3.629711] usbcore: registered new interface driver ums-usbat
[ 3.629890] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.630431] i8042: Warning: Keylock active
[ 3.631764] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.631861] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.632049] mousedev: PS/2 mouse device common for all mice
[ 3.632404] cpuidle: using governor ladder
[ 3.632544] cpuidle: using governor menu
[ 3.632711] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.632921] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.633237] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.633975] usbcore: registered new interface driver usbhid
[ 3.634071] usbhid: USB HID core driver
[ 3.634165] oprofile: using NMI interrupt.
[ 3.634369] TCP: cubic registered
[ 3.634650] NET: Registered protocol family 10
[ 3.634950] sit: IPv6 over IPv4 tunneling driver
[ 3.635220] NET: Registered protocol family 17
[ 3.635333] Bridge firewalling registered
[ 3.635443] Key type dns_resolver registered
[ 3.635859] PM: Checking hibernation image partition /dev/sda8
[ 3.715350] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.815784] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.816586] ata1.00: ATA-9: INTEL SSDSC2CT180A3, 300i, max UDMA/133
[ 3.816702] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.891851] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.892659] ata1.00: configured for UDMA/133
[ 3.899698] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CT18 300i PQ: 0 ANSI: 5
[ 3.900389] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
[ 3.900453] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.901017] sd 0:0:0:0: [sda] Write Protect is off
[ 3.901131] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.901199] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.902569] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 3.903275] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.923482] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.056196] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.056306] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.056993] hub 1-1:1.0: USB hub found
[ 4.057312] hub 1-1:1.0: 6 ports detected
[ 4.167646] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.219672] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.223214] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A4SH, QD12, max UDMA/100
[ 4.229433] ata2.00: configured for UDMA/100
[ 4.237021] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A4SH QD12 PQ: 0 ANSI: 5
[ 4.246399] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.246550] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.246988] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.247131] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.300085] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.300197] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.300931] hub 2-1:1.0: USB hub found
[ 4.301202] hub 2-1:1.0: 8 ports detected
[ 4.371893] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 4.469007] usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187
[ 4.469128] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.469271] usb 1-1.4: Product: DW375 Bluetooth Module
[ 4.469363] usb 1-1.4: Manufacturer: Dell Computer Corp
[ 4.469457] usb 1-1.4: SerialNumber: 446D57C904C4
[ 4.540007] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[ 4.563885] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.682036] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=6433
[ 4.682139] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 4.682284] usb 1-1.5: Product: Laptop_Integrated_Webcam_HD
[ 4.682377] usb 1-1.5: Manufacturer: CN018T967248725OB3W9A01
[ 4.760066] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[ 4.858757] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c050
[ 4.858857] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.859004] usb 2-1.3: Product: USB-PS/2 Optical Mouse
[ 4.859096] usb 2-1.3: Manufacturer: Logitech
[ 4.863980] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 4.864330] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 4.884108] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.936259] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
[ 5.014611] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6
[ 5.027851] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
[ 5.051361] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5801
[ 5.051461] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.051607] usb 2-1.8: Product: 5880
[ 5.051697] usb 2-1.8: Manufacturer: Broadcom Corp
[ 5.051789] usb 2-1.8: SerialNumber: 0123456789ABCD
[ 5.052073] usb 2-1.8: config 0 descriptor??
[ 5.204318] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.204506] PM: Hibernation image partition 8:8 present
[ 5.204508] PM: Looking for hibernation image.
[ 5.205878] PM: Image not found (code -22)
[ 5.205881] PM: Hibernation image not present or could not be loaded.
[ 5.205903] registered taskstats version 1
[ 5.208227] netpoll: netconsole: local port 6665
[ 5.208323] netpoll: netconsole: local IPv4 address 10.100.13.132
[ 5.208420] netpoll: netconsole: interface 'eth0'
[ 5.208513] netpoll: netconsole: remote port 6666
[ 5.208609] netpoll: netconsole: remote IPv4 address 10.100.13.54
[ 5.208706] netpoll: netconsole: remote ethernet address 00:19:d1:e4:e8:5a
[ 5.208805] netpoll: netconsole: device eth0 not up yet, forcing it
[ 5.342403] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 5.444508] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 5.444661] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.355414] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 8.355598] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.360342] console [netcon0] enabled
[ 8.360443] netconsole: network logging started
[ 8.361094] debug: unmapping init [mem 0xffffffff81aa4000-0xffffffff81b9efff]
[ 8.361227] Write protecting the kernel read-only data: 10240k
[ 8.361486] debug: unmapping init [mem 0xffff88000148f000-0xffff8800015fffff]
[ 8.361645] debug: unmapping init [mem 0xffff880001831000-0xffff8800019fffff]
[ 8.595407] PM: Starting manual resume from disk
[ 8.595554] PM: Hibernation image partition 8:8 present
[ 8.595555] PM: Looking for hibernation image.
[ 8.595763] PM: Image not found (code -22)
[ 8.595765] PM: Hibernation image not present or could not be loaded.
[ 8.598685] PM: Marking nosave pages: [mem 0x0009a000-0x000fffff]
[ 8.598689] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[ 8.598696] PM: Marking nosave pages: [mem 0x40000000-0x401fffff]
[ 8.598702] PM: Marking nosave pages: [mem 0xcaa29000-0xcaa6cfff]
[ 8.598704] PM: Marking nosave pages: [mem 0xcadb7000-0xcaffefff]
[ 8.598711] PM: Marking nosave pages: [mem 0xcb000000-0xffffffff]
[ 8.599307] PM: Basic memory bitmaps created
[ 8.613950] PM: Basic memory bitmaps freed
[ 8.776563] udevd[1754]: starting version 175
[ 8.881628] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[ 8.881877] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.889565] sdhci: Secure Digital Host Controller Interface driver
[ 8.889665] sdhci: Copyright(c) Pierre Ossman
[ 8.890381] sdhci-pci 0000:0a:00.0: SDHCI controller found [1217:8221] (rev 5)
[ 8.892493] mmc0: SDHCI controller on PCI [0000:0a:00.0] using DMA
[ 8.906348] cfg80211: Calling CRDA to update world regulatory domain
[ 8.913314] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 8.913415] Copyright(c) 2003-2013 Intel Corporation
[ 8.913830] iwlwifi 0000:02:00.0: irq 42 for MSI/MSI-X
[ 8.916956] media: Linux media interface: v0.10
[ 8.919813] Linux video capture interface: v2.00
[ 8.930964] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:6433)
[ 8.969881] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 9.010625] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 9.010821] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.010998] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.011174] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.011347] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.011523] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.011696] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 9.083207] iwlwifi 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 9.091475] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 9.091580] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 9.091679] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 9.091774] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 9.091867] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P enabled
[ 9.091962] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 9.092184] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 9.105065] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 9.551529] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15
[ 9.551739] usbcore: registered new interface driver uvcvideo
[ 9.551838] USB Video Class driver (1.1.1)
[ 9.699282] Adding 1535996k swap on /dev/sda8. Priority:-1 extents:1 across:1535996k SS
[ 10.348146] fuse init (API version 7.22)
[ 10.844406] EXT3-fs: barriers not enabled
[ 10.844707] kjournald starting. Commit interval 5 seconds
[ 10.844818] EXT3-fs (sda7): using internal journal
[ 10.844918] EXT3-fs (sda7): mounted filesystem with writeback data mode
[ 10.855294] EXT3-fs: barriers not enabled
[ 10.855490] kjournald starting. Commit interval 5 seconds
[ 10.855594] EXT3-fs (sda9): using internal journal
[ 10.855696] EXT3-fs (sda9): mounted filesystem with writeback data mode
[ 10.864546] EXT3-fs: barriers not enabled
[ 10.864787] kjournald starting. Commit interval 5 seconds
[ 10.864893] EXT3-fs (sda5): using internal journal
[ 10.864994] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 10.873827] EXT3-fs: barriers not enabled
[ 10.874065] kjournald starting. Commit interval 5 seconds
[ 10.874169] EXT3-fs (sda6): using internal journal
[ 10.874270] EXT3-fs (sda6): mounted filesystem with writeback data mode
[ 11.822545] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 11.822854] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
[ 12.170958] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 12.171305] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
[ 12.402822] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.826591] [drm] Initialized drm 1.1.0 20060810
[ 12.841869] [drm] Memory usable by graphics device = 2048M
[ 12.841884] i915 0000:00:02.0: setting latency timer to 64
[ 12.856066] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 12.856074] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.856324] [drm] Driver supports precise vblank timestamp query.
[ 12.856493] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.888594] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 12.888604] [drm] This can cause pipe underruns and display issues.
[ 12.888607] [drm] Please upgrade your BIOS to fix this.
[ 12.903479] fbcon: inteldrmfb (fb0) is primary device
[ 12.903574] Console: switching to colour frame buffer device 170x48
[ 12.903589] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 12.903592] i915 0000:00:02.0: registered panic notifier
[ 13.369936] acpi device:37: registered as cooling_device2
[ 13.525926] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 13.526000] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 13.526049] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.830827] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: 3.10-rc1 system starts regular boot when waking from s2ram
2013-05-14 16:01 3.10-rc1 system starts regular boot when waking from s2ram Michal Hocko
@ 2013-05-14 20:09 ` Rafael J. Wysocki
2013-05-15 8:01 ` Michal Hocko
2013-05-15 9:56 ` Michal Hocko
` (2 subsequent siblings)
3 siblings, 1 reply; 38+ messages in thread
From: Rafael J. Wysocki @ 2013-05-14 20:09 UTC (permalink / raw)
To: Michal Hocko; +Cc: linux-pm, Len Brown, Pavel Machek, LKML
On Tuesday, May 14, 2013 06:01:08 PM Michal Hocko wrote:
> Hi,
> I am not able to make my system wake up from s2ram with 3.10-rc1. The
> system simply starts booting as if it wasn't suspended. 3.9 works
> without any issues.
>
> pm_test testing (with no_console_suspend) shows that platform is the
> last mode which wakes up normally. processors mode already starts with a
> regular boot. The log doesn't say anything interesting:
>
> $ echo processors > /sys/power/pm_test
> $ echo mem > /sys/power/state
> [ 61.012533] PM: Syncing filesystems ... done.
> [ 61.017944] Freezing user space processes ... (elapsed 0.01 seconds) done.
> [ 61.033050] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> [ 61.081647] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 61.081724] sd 0:0:0:0: [sda] Stopping disk
>
> then it waits for 5s as expected and starts booting from scratch without
> anything in the log.
>
> Same test with
> $ echo platform > /sys/power/pm_test
> $ echo mem > /sys/power/state
> [ 34.960477] PM: Syncing filesystems ... done.
> [ 34.967624] Freezing user space processes ... (elapsed 0.01 seconds) done.
> [ 34.983936] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> [ 35.056655] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 35.056800] sd 0:0:0:0: [sda] Stopping disk
> [ 41.255957] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 41.316267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 41.316354] ata5: SATA link down (SStatus 0 SControl 300)
> [ 41.316428] ata4: SATA link down (SStatus 0 SControl 300)
> [ 41.316507] ata6: SATA link down (SStatus 0 SControl 300)
> [ 41.316958] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [ 41.388315] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [ 41.389142] ata1.00: configured for UDMA/133
> [ 41.391172] ata2.00: configured for UDMA/100
> [ 41.396198] sd 0:0:0:0: [sda] Starting disk
> [ 41.396533] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
> [ 41.396767] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
> [ 41.638698] PM: resume of devices complete after 724.548 msecs
> [ 41.638835] Restarting tasks ... done.
> [ 41.640747] video LNXVIDEO:00: Restoring backlight state
> [ 42.848988] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> [ 42.850380] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
> [ 42.850380] TDH <0>
> [ 42.850380] TDT <11>
> [ 42.850380] next_to_use <11>
> [ 42.850380] next_to_clean <0>
> [ 42.850380] buffer_info[next_to_clean]:
> [ 42.850380] time_stamp <ffff034b>
> [ 42.850380] next_to_watch <0>
> [ 42.850380] jiffies <ffff04d9>
> [ 42.850380] next_to_watch.status <0>
> [ 42.850380] MAC Status <80000>
> [ 42.850380] PHY Status <7949>
> [ 42.850380] PHY 1000BASE-T Status <0>
> [ 42.850380] PHY Extended Status <3000>
> [ 42.850380] PCI Status <10>
> [ 44.066855] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>
> Is the issue known?
No.
> Can I provide more information to help with debugging this issue.
I'm not sure.
> I am quite busy to bisect this ATM but can do it
> if this is the only choice left.
Well, it probably is. I'll try to reproduce it, but if I can't ...
Anyway, the general PM changes essentially are not so invasive as to cause
something like this to happen, so I'm kind of suspecting x86.
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: 3.10-rc1 system starts regular boot when waking from s2ram
2013-05-14 20:09 ` Rafael J. Wysocki
@ 2013-05-15 8:01 ` Michal Hocko
2013-05-15 8:29 ` Pavel Machek
2013-05-15 9:05 ` Pavel Machek
0 siblings, 2 replies; 38+ messages in thread
From: Michal Hocko @ 2013-05-15 8:01 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-pm, Len Brown, Pavel Machek, LKML
On Tue 14-05-13 22:09:34, Rafael J. Wysocki wrote:
> On Tuesday, May 14, 2013 06:01:08 PM Michal Hocko wrote:
> > Hi,
> > I am not able to make my system wake up from s2ram with 3.10-rc1. The
> > system simply starts booting as if it wasn't suspended. 3.9 works
> > without any issues.
> >
> > pm_test testing (with no_console_suspend) shows that platform is the
> > last mode which wakes up normally. processors mode already starts with a
> > regular boot. The log doesn't say anything interesting:
> >
> > $ echo processors > /sys/power/pm_test
> > $ echo mem > /sys/power/state
> > [ 61.012533] PM: Syncing filesystems ... done.
> > [ 61.017944] Freezing user space processes ... (elapsed 0.01 seconds) done.
> > [ 61.033050] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> > [ 61.081647] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> > [ 61.081724] sd 0:0:0:0: [sda] Stopping disk
> >
> > then it waits for 5s as expected and starts booting from scratch without
> > anything in the log.
> >
> > Same test with
> > $ echo platform > /sys/power/pm_test
> > $ echo mem > /sys/power/state
> > [ 34.960477] PM: Syncing filesystems ... done.
> > [ 34.967624] Freezing user space processes ... (elapsed 0.01 seconds) done.
> > [ 34.983936] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> > [ 35.056655] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> > [ 35.056800] sd 0:0:0:0: [sda] Stopping disk
> > [ 41.255957] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> > [ 41.316267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > [ 41.316354] ata5: SATA link down (SStatus 0 SControl 300)
> > [ 41.316428] ata4: SATA link down (SStatus 0 SControl 300)
> > [ 41.316507] ata6: SATA link down (SStatus 0 SControl 300)
> > [ 41.316958] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > [ 41.388315] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > [ 41.389142] ata1.00: configured for UDMA/133
> > [ 41.391172] ata2.00: configured for UDMA/100
> > [ 41.396198] sd 0:0:0:0: [sda] Starting disk
> > [ 41.396533] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
> > [ 41.396767] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
> > [ 41.638698] PM: resume of devices complete after 724.548 msecs
> > [ 41.638835] Restarting tasks ... done.
> > [ 41.640747] video LNXVIDEO:00: Restoring backlight state
> > [ 42.848988] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> > [ 42.850380] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
> > [ 42.850380] TDH <0>
> > [ 42.850380] TDT <11>
> > [ 42.850380] next_to_use <11>
> > [ 42.850380] next_to_clean <0>
> > [ 42.850380] buffer_info[next_to_clean]:
> > [ 42.850380] time_stamp <ffff034b>
> > [ 42.850380] next_to_watch <0>
> > [ 42.850380] jiffies <ffff04d9>
> > [ 42.850380] next_to_watch.status <0>
> > [ 42.850380] MAC Status <80000>
> > [ 42.850380] PHY Status <7949>
> > [ 42.850380] PHY 1000BASE-T Status <0>
> > [ 42.850380] PHY Extended Status <3000>
> > [ 42.850380] PCI Status <10>
> > [ 44.066855] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
> >
> > Is the issue known?
>
> No.
>
> > Can I provide more information to help with debugging this issue.
>
> I'm not sure.
>
> > I am quite busy to bisect this ATM but can do it
> > if this is the only choice left.
>
> Well, it probably is. I'll try to reproduce it, but if I can't ...
OK, I am bisecting now. 6 iterations left...
> Anyway, the general PM changes essentially are not so invasive as to cause
> something like this to happen, so I'm kind of suspecting x86.
>
> Thanks,
> Rafael
>
>
> --
> I speak only for myself.
> Rafael J. Wysocki, Intel Open Source Technology Center.
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: 3.10-rc1 system starts regular boot when waking from s2ram
2013-05-15 8:01 ` Michal Hocko
@ 2013-05-15 8:29 ` Pavel Machek
2013-05-15 9:05 ` Pavel Machek
1 sibling, 0 replies; 38+ messages in thread
From: Pavel Machek @ 2013-05-15 8:29 UTC (permalink / raw)
To: Michal Hocko; +Cc: Rafael J. Wysocki, linux-pm, Len Brown, LKML
Hi!
> > > $ echo platform > /sys/power/pm_test
> > > $ echo mem > /sys/power/state
> > > [ 34.960477] PM: Syncing filesystems ... done.
> > > [ 34.967624] Freezing user space processes ... (elapsed 0.01 seconds) done.
> > > [ 34.983936] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> > > [ 35.056655] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> > > [ 35.056800] sd 0:0:0:0: [sda] Stopping disk
> > > [ 41.255957] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> > > [ 41.316267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > > [ 41.316354] ata5: SATA link down (SStatus 0 SControl 300)
> > > [ 41.316428] ata4: SATA link down (SStatus 0 SControl 300)
> > > [ 41.316507] ata6: SATA link down (SStatus 0 SControl 300)
> > > [ 41.316958] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > > [ 41.388315] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > > [ 41.389142] ata1.00: configured for UDMA/133
> > > [ 41.391172] ata2.00: configured for UDMA/100
> > > [ 41.396198] sd 0:0:0:0: [sda] Starting disk
> > > [ 41.396533] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
> > > [ 41.396767] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
> > > [ 41.638698] PM: resume of devices complete after 724.548 msecs
> > > [ 41.638835] Restarting tasks ... done.
> > > [ 41.640747] video LNXVIDEO:00: Restoring backlight state
> > > [ 42.848988] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> > > [ 42.850380] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
> > > [ 42.850380] TDH <0>
> > > [ 42.850380] TDT <11>
> > > [ 42.850380] next_to_use <11>
> > > [ 42.850380] next_to_clean <0>
> > > [ 42.850380] buffer_info[next_to_clean]:
> > > [ 42.850380] time_stamp <ffff034b>
> > > [ 42.850380] next_to_watch <0>
> > > [ 42.850380] jiffies <ffff04d9>
> > > [ 42.850380] next_to_watch.status <0>
> > > [ 42.850380] MAC Status <80000>
> > > [ 42.850380] PHY Status <7949>
> > > [ 42.850380] PHY 1000BASE-T Status <0>
> > > [ 42.850380] PHY Extended Status <3000>
> > > [ 42.850380] PCI Status <10>
> > > [ 44.066855] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
> > >
> > > Is the issue known?
> >
> > No.
> >
> > > Can I provide more information to help with debugging this issue.
> >
> > I'm not sure.
> >
> > > I am quite busy to bisect this ATM but can do it
> > > if this is the only choice left.
> >
> > Well, it probably is. I'll try to reproduce it, but if I can't ...
>
> OK, I am bisecting now. 6 iterations left...
Do you have any watchdog active? Resume got slower and someone bisected it:
Date: Sat, 11 May 2013 20:04:50 +0200
From: Bj??rn Mork <bjorn@mork.no>
To: "Paul E. McKenney" <paul.mckenney@linaro.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>, linux-kernel@vger.kernel.org
Subject: Bisected post-3.9 regression: Resume takes 5 times as much time as with v3.9
User-Agent: Gnus/5.11002 (No Gnus v0.20) Emacs/23.4 (gnu/linux)
[-- Attachment #1 --]
[-- Type: text/plain, Encoding: quoted-printable, Size: 1.6K --]
Hello,
resuming from system suspend is intolerably slow in current mainline. I
am not the most patient person around, and I actually started out
bisecting this believing it was hanging... Turned out it wasn't really
hanging. It just took 15 seconds to wake up from suspend-to-ram.
Timing v3.9 I found that it used less than 3 seconds on this ancient
laptop I'm using.
Bisecting it ended up pointing to
commit c0f4dfd4f90f1667d234d21f15153ea09a2eaa66
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: 3.10-rc1 system starts regular boot when waking from s2ram
2013-05-15 8:01 ` Michal Hocko
2013-05-15 8:29 ` Pavel Machek
@ 2013-05-15 9:05 ` Pavel Machek
1 sibling, 0 replies; 38+ messages in thread
From: Pavel Machek @ 2013-05-15 9:05 UTC (permalink / raw)
To: Michal Hocko; +Cc: Rafael J. Wysocki, linux-pm, Len Brown, LKML
Hi!
> > Well, it probably is. I'll try to reproduce it, but if I can't ...
>
> OK, I am bisecting now. 6 iterations left...
Good luck. I tried to reproduce it locally on thinkpad x60, but it
suspends/resumes ok.
(There seems to be regression in bluetooth; tray widget now shows
bluetooth is unavailable and it can't be turned on. x60 uses btusb.)
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: 3.10-rc1 system starts regular boot when waking from s2ram
2013-05-14 16:01 3.10-rc1 system starts regular boot when waking from s2ram Michal Hocko
2013-05-14 20:09 ` Rafael J. Wysocki
@ 2013-05-15 9:56 ` Michal Hocko
2013-05-17 7:54 ` Michal Hocko
2013-05-15 13:17 ` Victor Miasnikov
2013-05-20 15:03 ` [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware" Michal Hocko
3 siblings, 1 reply; 38+ messages in thread
From: Michal Hocko @ 2013-05-15 9:56 UTC (permalink / raw)
To: linux-pm
Cc: Len Brown, Pavel Machek, Rafael J. Wysocki, LKML, H. Peter Anvin,
Fernando Luis Vázquez Cao, x86
OK, I have bisected it to 78d77df7 (x86-64, init: Do not set NX bits on
non-NX capable hardware). Reverting the patch on top of 3.10-rc1 fixes
the issue for me and the machine resumes just fine.
Let's add involved people to the CC.
The original message with the confing and dmesg is bellow.
On Tue 14-05-13 18:01:08, Michal Hocko wrote:
> Hi,
> I am not able to make my system wake up from s2ram with 3.10-rc1. The
> system simply starts booting as if it wasn't suspended. 3.9 works
> without any issues.
>
> pm_test testing (with no_console_suspend) shows that platform is the
> last mode which wakes up normally. processors mode already starts with a
> regular boot. The log doesn't say anything interesting:
>
> $ echo processors > /sys/power/pm_test
> $ echo mem > /sys/power/state
> [ 61.012533] PM: Syncing filesystems ... done.
> [ 61.017944] Freezing user space processes ... (elapsed 0.01 seconds) done.
> [ 61.033050] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> [ 61.081647] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 61.081724] sd 0:0:0:0: [sda] Stopping disk
>
> then it waits for 5s as expected and starts booting from scratch without
> anything in the log.
>
> Same test with
> $ echo platform > /sys/power/pm_test
> $ echo mem > /sys/power/state
> [ 34.960477] PM: Syncing filesystems ... done.
> [ 34.967624] Freezing user space processes ... (elapsed 0.01 seconds) done.
> [ 34.983936] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> [ 35.056655] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 35.056800] sd 0:0:0:0: [sda] Stopping disk
> [ 41.255957] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 41.316267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 41.316354] ata5: SATA link down (SStatus 0 SControl 300)
> [ 41.316428] ata4: SATA link down (SStatus 0 SControl 300)
> [ 41.316507] ata6: SATA link down (SStatus 0 SControl 300)
> [ 41.316958] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [ 41.388315] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [ 41.389142] ata1.00: configured for UDMA/133
> [ 41.391172] ata2.00: configured for UDMA/100
> [ 41.396198] sd 0:0:0:0: [sda] Starting disk
> [ 41.396533] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
> [ 41.396767] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
> [ 41.638698] PM: resume of devices complete after 724.548 msecs
> [ 41.638835] Restarting tasks ... done.
> [ 41.640747] video LNXVIDEO:00: Restoring backlight state
> [ 42.848988] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> [ 42.850380] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
> [ 42.850380] TDH <0>
> [ 42.850380] TDT <11>
> [ 42.850380] next_to_use <11>
> [ 42.850380] next_to_clean <0>
> [ 42.850380] buffer_info[next_to_clean]:
> [ 42.850380] time_stamp <ffff034b>
> [ 42.850380] next_to_watch <0>
> [ 42.850380] jiffies <ffff04d9>
> [ 42.850380] next_to_watch.status <0>
> [ 42.850380] MAC Status <80000>
> [ 42.850380] PHY Status <7949>
> [ 42.850380] PHY 1000BASE-T Status <0>
> [ 42.850380] PHY Extended Status <3000>
> [ 42.850380] PCI Status <10>
> [ 44.066855] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>
> Is the issue known? Can I provide more information to help with
> debugging this issue. I am quite busy to bisect this ATM but can do it
> if this is the only choice left.
>
> Thanks
> --
> Michal Hocko
> SUSE Labs
> #
> # Automatically generated file; DO NOT EDIT.
> # Linux/x86_64 3.10.0-rc1-fullnohzdisabled Kernel Configuration
> #
> CONFIG_64BIT=y
> CONFIG_X86_64=y
> CONFIG_X86=y
> CONFIG_INSTRUCTION_DECODER=y
> CONFIG_OUTPUT_FORMAT="elf64-x86-64"
> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_MMU=y
> CONFIG_NEED_DMA_MAP_STATE=y
> CONFIG_NEED_SG_DMA_LENGTH=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
> CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> CONFIG_ZONE_DMA32=y
> CONFIG_AUDIT_ARCH=y
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> CONFIG_X86_64_SMP=y
> CONFIG_X86_HT=y
> CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
> CONFIG_ARCH_CPU_PROBE_RELEASE=y
> CONFIG_ARCH_SUPPORTS_UPROBES=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> CONFIG_IRQ_WORK=y
> CONFIG_BUILDTIME_EXTABLE_SORT=y
>
> #
> # General setup
> #
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_CROSS_COMPILE=""
> CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> CONFIG_HAVE_KERNEL_GZIP=y
> CONFIG_HAVE_KERNEL_BZIP2=y
> CONFIG_HAVE_KERNEL_LZMA=y
> CONFIG_HAVE_KERNEL_XZ=y
> CONFIG_HAVE_KERNEL_LZO=y
> CONFIG_KERNEL_GZIP=y
> # CONFIG_KERNEL_BZIP2 is not set
> # CONFIG_KERNEL_LZMA is not set
> # CONFIG_KERNEL_XZ is not set
> # CONFIG_KERNEL_LZO is not set
> CONFIG_DEFAULT_HOSTNAME="(none)"
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_POSIX_MQUEUE_SYSCTL=y
> # CONFIG_FHANDLE is not set
> # CONFIG_AUDIT is not set
> CONFIG_HAVE_GENERIC_HARDIRQS=y
>
> #
> # IRQ subsystem
> #
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_IRQ_SHOW=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_IRQ_FORCED_THREADING=y
> CONFIG_SPARSE_IRQ=y
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_ARCH_CLOCKSOURCE_DATA=y
> CONFIG_ALWAYS_USE_PERSISTENT_CLOCK=y
> CONFIG_GENERIC_TIME_VSYSCALL=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
> CONFIG_GENERIC_CMOS_UPDATE=y
>
> #
> # Timers subsystem
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ_COMMON=y
> # CONFIG_HZ_PERIODIC is not set
> CONFIG_NO_HZ_IDLE=y
> # CONFIG_NO_HZ_FULL is not set
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
>
> #
> # CPU/Task time and stats accounting
> #
> CONFIG_VIRT_CPU_ACCOUNTING=y
> # CONFIG_TICK_CPU_ACCOUNTING is not set
> CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
> # CONFIG_IRQ_TIME_ACCOUNTING is not set
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> CONFIG_TASK_XACCT=y
> CONFIG_TASK_IO_ACCOUNTING=y
>
> #
> # RCU Subsystem
> #
> CONFIG_TREE_PREEMPT_RCU=y
> CONFIG_PREEMPT_RCU=y
> CONFIG_RCU_STALL_COMMON=y
> CONFIG_CONTEXT_TRACKING=y
> CONFIG_RCU_USER_QS=y
> CONFIG_CONTEXT_TRACKING_FORCE=y
> CONFIG_RCU_FANOUT=32
> CONFIG_RCU_FANOUT_LEAF=16
> # CONFIG_RCU_FANOUT_EXACT is not set
> # CONFIG_RCU_FAST_NO_HZ is not set
> # CONFIG_TREE_RCU_TRACE is not set
> # CONFIG_RCU_BOOST is not set
> CONFIG_RCU_NOCB_CPU=y
> # CONFIG_RCU_NOCB_CPU_NONE is not set
> # CONFIG_RCU_NOCB_CPU_ZERO is not set
> CONFIG_RCU_NOCB_CPU_ALL=y
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> CONFIG_LOG_BUF_SHIFT=18
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
> CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
> CONFIG_CGROUPS=y
> # CONFIG_CGROUP_DEBUG is not set
> # CONFIG_CGROUP_FREEZER is not set
> # CONFIG_CGROUP_DEVICE is not set
> # CONFIG_CPUSETS is not set
> # CONFIG_CGROUP_CPUACCT is not set
> CONFIG_RESOURCE_COUNTERS=y
> CONFIG_MEMCG=y
> CONFIG_MEMCG_SWAP=y
> CONFIG_MEMCG_SWAP_ENABLED=y
> CONFIG_MEMCG_KMEM=y
> # CONFIG_CGROUP_HUGETLB is not set
> # CONFIG_CGROUP_PERF is not set
> CONFIG_CGROUP_SCHED=y
> CONFIG_FAIR_GROUP_SCHED=y
> # CONFIG_CFS_BANDWIDTH is not set
> CONFIG_RT_GROUP_SCHED=y
> # CONFIG_BLK_CGROUP is not set
> # CONFIG_CHECKPOINT_RESTORE is not set
> CONFIG_NAMESPACES=y
> # CONFIG_UTS_NS is not set
> # CONFIG_IPC_NS is not set
> # CONFIG_USER_NS is not set
> # CONFIG_PID_NS is not set
> # CONFIG_NET_NS is not set
> CONFIG_UIDGID_CONVERTED=y
> # CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
> CONFIG_SCHED_AUTOGROUP=y
> CONFIG_MM_OWNER=y
> # CONFIG_SYSFS_DEPRECATED is not set
> CONFIG_RELAY=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_RD_GZIP=y
> CONFIG_RD_BZIP2=y
> CONFIG_RD_LZMA=y
> CONFIG_RD_XZ=y
> CONFIG_RD_LZO=y
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> CONFIG_ANON_INODES=y
> CONFIG_HAVE_UID16=y
> CONFIG_SYSCTL_EXCEPTION_TRACE=y
> CONFIG_HOTPLUG=y
> CONFIG_HAVE_PCSPKR_PLATFORM=y
> # CONFIG_EXPERT is not set
> CONFIG_UID16=y
> # CONFIG_SYSCTL_SYSCALL is not set
> CONFIG_KALLSYMS=y
> CONFIG_KALLSYMS_ALL=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_AIO=y
> CONFIG_PCI_QUIRKS=y
> # CONFIG_EMBEDDED is not set
> CONFIG_HAVE_PERF_EVENTS=y
>
> #
> # Kernel Performance Events And Counters
> #
> CONFIG_PERF_EVENTS=y
> # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_SLUB_DEBUG=y
> CONFIG_COMPAT_BRK=y
> # CONFIG_SLAB is not set
> CONFIG_SLUB=y
> CONFIG_PROFILING=y
> CONFIG_TRACEPOINTS=y
> CONFIG_OPROFILE=y
> # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
> CONFIG_HAVE_OPROFILE=y
> CONFIG_OPROFILE_NMI_TIMER=y
> CONFIG_KPROBES=y
> # CONFIG_JUMP_LABEL is not set
> CONFIG_KPROBES_ON_FTRACE=y
> CONFIG_UPROBES=y
> # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> CONFIG_ARCH_USE_BUILTIN_BSWAP=y
> CONFIG_KRETPROBES=y
> CONFIG_USER_RETURN_NOTIFIER=y
> CONFIG_HAVE_IOREMAP_PROT=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> CONFIG_HAVE_OPTPROBES=y
> CONFIG_HAVE_KPROBES_ON_FTRACE=y
> CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_DMA_ATTRS=y
> CONFIG_USE_GENERIC_SMP_HELPERS=y
> CONFIG_GENERIC_SMP_IDLE_THREAD=y
> CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> CONFIG_HAVE_DMA_API_DEBUG=y
> CONFIG_HAVE_HW_BREAKPOINT=y
> CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
> CONFIG_HAVE_USER_RETURN_NOTIFIER=y
> CONFIG_HAVE_PERF_EVENTS_NMI=y
> CONFIG_HAVE_PERF_REGS=y
> CONFIG_HAVE_PERF_USER_STACK_DUMP=y
> CONFIG_HAVE_ARCH_JUMP_LABEL=y
> CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
> CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
> CONFIG_HAVE_CMPXCHG_LOCAL=y
> CONFIG_HAVE_CMPXCHG_DOUBLE=y
> CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
> CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
> CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
> CONFIG_SECCOMP_FILTER=y
> CONFIG_HAVE_CONTEXT_TRACKING=y
> CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
> CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
> CONFIG_MODULES_USE_ELF_RELA=y
> CONFIG_OLD_SIGSUSPEND3=y
> CONFIG_COMPAT_OLD_SIGACTION=y
>
> #
> # GCOV-based kernel profiling
> #
> # CONFIG_GCOV_KERNEL is not set
> # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> # CONFIG_MODULE_FORCE_LOAD is not set
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> # CONFIG_MODVERSIONS is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> # CONFIG_MODULE_SIG is not set
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> # CONFIG_BLK_DEV_BSG is not set
> # CONFIG_BLK_DEV_BSGLIB is not set
> # CONFIG_BLK_DEV_INTEGRITY is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> # CONFIG_OSF_PARTITION is not set
> # CONFIG_AMIGA_PARTITION is not set
> # CONFIG_ATARI_PARTITION is not set
> # CONFIG_MAC_PARTITION is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_BSD_DISKLABEL=y
> # CONFIG_MINIX_SUBPARTITION is not set
> # CONFIG_SOLARIS_X86_PARTITION is not set
> # CONFIG_UNIXWARE_DISKLABEL is not set
> CONFIG_LDM_PARTITION=y
> CONFIG_LDM_DEBUG=y
> # CONFIG_SGI_PARTITION is not set
> # CONFIG_ULTRIX_PARTITION is not set
> # CONFIG_SUN_PARTITION is not set
> # CONFIG_KARMA_PARTITION is not set
> # CONFIG_EFI_PARTITION is not set
> # CONFIG_SYSV68_PARTITION is not set
> CONFIG_BLOCK_COMPAT=y
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_DEADLINE is not set
> CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
> CONFIG_PREEMPT_NOTIFIERS=y
> CONFIG_UNINLINE_SPIN_UNLOCK=y
> CONFIG_MUTEX_SPIN_ON_OWNER=y
> CONFIG_FREEZER=y
>
> #
> # Processor type and features
> #
> CONFIG_ZONE_DMA=y
> CONFIG_SMP=y
> CONFIG_X86_MPPARSE=y
> # CONFIG_X86_EXTENDED_PLATFORM is not set
> # CONFIG_X86_INTEL_LPSS is not set
> CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
> CONFIG_SCHED_OMIT_FRAME_POINTER=y
> # CONFIG_HYPERVISOR_GUEST is not set
> CONFIG_NO_BOOTMEM=y
> CONFIG_MEMTEST=y
> # CONFIG_MK8 is not set
> # CONFIG_MPSC is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_MATOM is not set
> CONFIG_GENERIC_CPU=y
> CONFIG_X86_INTERNODE_CACHE_SHIFT=6
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=64
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_CPU_SUP_INTEL=y
> CONFIG_CPU_SUP_AMD=y
> CONFIG_CPU_SUP_CENTAUR=y
> CONFIG_HPET_TIMER=y
> CONFIG_DMI=y
> CONFIG_GART_IOMMU=y
> # CONFIG_CALGARY_IOMMU is not set
> CONFIG_SWIOTLB=y
> CONFIG_IOMMU_HELPER=y
> # CONFIG_MAXSMP is not set
> CONFIG_NR_CPUS=8
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> CONFIG_PREEMPT_COUNT=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> # CONFIG_X86_MCE_AMD is not set
> CONFIG_X86_MCE_THRESHOLD=y
> # CONFIG_X86_MCE_INJECT is not set
> CONFIG_X86_THERMAL_VECTOR=y
> # CONFIG_I8K is not set
> CONFIG_MICROCODE=y
> CONFIG_MICROCODE_INTEL=y
> # CONFIG_MICROCODE_AMD is not set
> CONFIG_MICROCODE_OLD_INTERFACE=y
> CONFIG_MICROCODE_INTEL_LIB=y
> CONFIG_MICROCODE_INTEL_EARLY=y
> CONFIG_MICROCODE_EARLY=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
> CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> CONFIG_DIRECT_GBPAGES=y
> # CONFIG_NUMA is not set
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_ARCH_MEMORY_PROBE=y
> CONFIG_ARCH_PROC_KCORE_TEXT=y
> CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_SPARSEMEM_MANUAL=y
> CONFIG_SPARSEMEM=y
> CONFIG_HAVE_MEMORY_PRESENT=y
> CONFIG_SPARSEMEM_EXTREME=y
> CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
> CONFIG_SPARSEMEM_VMEMMAP=y
> CONFIG_HAVE_MEMBLOCK=y
> CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
> CONFIG_ARCH_DISCARD_MEMBLOCK=y
> CONFIG_MEMORY_ISOLATION=y
> CONFIG_HAVE_BOOTMEM_INFO_NODE=y
> CONFIG_MEMORY_HOTPLUG=y
> CONFIG_MEMORY_HOTPLUG_SPARSE=y
> CONFIG_MEMORY_HOTREMOVE=y
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_COMPACTION=y
> CONFIG_MIGRATION=y
> CONFIG_PHYS_ADDR_T_64BIT=y
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_MMU_NOTIFIER=y
> CONFIG_KSM=y
> CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
> # CONFIG_MEMORY_FAILURE is not set
> CONFIG_TRANSPARENT_HUGEPAGE=y
> CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
> # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
> # CONFIG_CROSS_MEMORY_ATTACH is not set
> # CONFIG_CLEANCACHE is not set
> # CONFIG_FRONTSWAP is not set
> # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> CONFIG_X86_RESERVE_LOW=64
> CONFIG_MTRR=y
> # CONFIG_MTRR_SANITIZER is not set
> CONFIG_X86_PAT=y
> CONFIG_ARCH_USES_PG_UNCACHED=y
> CONFIG_ARCH_RANDOM=y
> CONFIG_X86_SMAP=y
> # CONFIG_EFI is not set
> CONFIG_SECCOMP=y
> # CONFIG_CC_STACKPROTECTOR is not set
> # CONFIG_HZ_100 is not set
> CONFIG_HZ_250=y
> # CONFIG_HZ_300 is not set
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=250
> CONFIG_SCHED_HRTICK=y
> CONFIG_KEXEC=y
> # CONFIG_CRASH_DUMP is not set
> # CONFIG_KEXEC_JUMP is not set
> CONFIG_PHYSICAL_START=0x1000000
> CONFIG_RELOCATABLE=y
> CONFIG_PHYSICAL_ALIGN=0x1000000
> CONFIG_HOTPLUG_CPU=y
> # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
> # CONFIG_DEBUG_HOTPLUG_CPU0 is not set
> CONFIG_COMPAT_VDSO=y
> # CONFIG_CMDLINE_BOOL is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
>
> #
> # Power management and ACPI options
> #
> CONFIG_ARCH_HIBERNATION_HEADER=y
> CONFIG_SUSPEND=y
> CONFIG_SUSPEND_FREEZER=y
> CONFIG_HIBERNATE_CALLBACKS=y
> CONFIG_HIBERNATION=y
> CONFIG_PM_STD_PARTITION=""
> CONFIG_PM_SLEEP=y
> CONFIG_PM_SLEEP_SMP=y
> # CONFIG_PM_AUTOSLEEP is not set
> # CONFIG_PM_WAKELOCKS is not set
> # CONFIG_PM_RUNTIME is not set
> CONFIG_PM=y
> CONFIG_PM_DEBUG=y
> # CONFIG_PM_ADVANCED_DEBUG is not set
> CONFIG_PM_SLEEP_DEBUG=y
> # CONFIG_PM_TRACE_RTC is not set
> CONFIG_ACPI=y
> CONFIG_ACPI_SLEEP=y
> # CONFIG_ACPI_PROCFS is not set
> # CONFIG_ACPI_PROCFS_POWER is not set
> # CONFIG_ACPI_EC_DEBUGFS is not set
> CONFIG_ACPI_PROC_EVENT=y
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_VIDEO=m
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_DOCK=y
> CONFIG_ACPI_I2C=m
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_CUSTOM_DSDT is not set
> # CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
> CONFIG_ACPI_BLACKLIST_YEAR=0
> CONFIG_ACPI_DEBUG=y
> # CONFIG_ACPI_PCI_SLOT is not set
> CONFIG_X86_PM_TIMER=y
> CONFIG_ACPI_CONTAINER=y
> # CONFIG_ACPI_HOTPLUG_MEMORY is not set
> # CONFIG_ACPI_SBS is not set
> # CONFIG_ACPI_HED is not set
> # CONFIG_ACPI_CUSTOM_METHOD is not set
> # CONFIG_ACPI_APEI is not set
> # CONFIG_SFI is not set
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=y
> CONFIG_CPU_FREQ_GOV_COMMON=y
> CONFIG_CPU_FREQ_STAT=y
> # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
>
> #
> # x86 CPU frequency scaling drivers
> #
> # CONFIG_X86_INTEL_PSTATE is not set
> # CONFIG_X86_PCC_CPUFREQ is not set
> CONFIG_X86_ACPI_CPUFREQ=y
> CONFIG_X86_ACPI_CPUFREQ_CPB=y
> # CONFIG_X86_POWERNOW_K8 is not set
> # CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> # CONFIG_X86_P4_CLOCKMOD is not set
>
> #
> # shared options
> #
> # CONFIG_X86_SPEEDSTEP_LIB is not set
> CONFIG_CPU_IDLE=y
> # CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
> CONFIG_CPU_IDLE_GOV_LADDER=y
> CONFIG_CPU_IDLE_GOV_MENU=y
> # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
> # CONFIG_INTEL_IDLE is not set
>
> #
> # Memory power savings
> #
> # CONFIG_I7300_IDLE is not set
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_PCI_DOMAINS=y
> # CONFIG_PCIEPORTBUS is not set
> CONFIG_ARCH_SUPPORTS_MSI=y
> CONFIG_PCI_MSI=y
> # CONFIG_PCI_DEBUG is not set
> # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
> # CONFIG_PCI_STUB is not set
> # CONFIG_HT_IRQ is not set
> # CONFIG_PCI_IOV is not set
> # CONFIG_PCI_PRI is not set
> # CONFIG_PCI_PASID is not set
> CONFIG_PCI_IOAPIC=y
> CONFIG_PCI_LABEL=y
> CONFIG_ISA_DMA_API=y
> CONFIG_AMD_NB=y
> # CONFIG_PCCARD is not set
> # CONFIG_HOTPLUG_PCI is not set
> # CONFIG_RAPIDIO is not set
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_COMPAT_BINFMT_ELF=y
> CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
> # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> CONFIG_BINFMT_SCRIPT=y
> # CONFIG_HAVE_AOUT is not set
> CONFIG_BINFMT_MISC=m
> CONFIG_COREDUMP=y
> CONFIG_IA32_EMULATION=y
> # CONFIG_IA32_AOUT is not set
> # CONFIG_X86_X32 is not set
> CONFIG_COMPAT=y
> CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
> CONFIG_SYSVIPC_COMPAT=y
> CONFIG_KEYS_COMPAT=y
> CONFIG_HAVE_TEXT_POKE_SMP=y
> CONFIG_X86_DEV_DMA_OPS=y
> CONFIG_NET=y
> CONFIG_COMPAT_NETLINK_MESSAGES=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_DIAG is not set
> CONFIG_UNIX=y
> # CONFIG_UNIX_DIAG is not set
> CONFIG_XFRM=y
> # CONFIG_XFRM_USER is not set
> # CONFIG_XFRM_SUB_POLICY is not set
> # CONFIG_XFRM_MIGRATE is not set
> # CONFIG_XFRM_STATISTICS is not set
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> # CONFIG_IP_FIB_TRIE_STATS is not set
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_VERBOSE=y
> CONFIG_IP_PNP=y
> CONFIG_IP_PNP_DHCP=y
> CONFIG_IP_PNP_BOOTP=y
> CONFIG_IP_PNP_RARP=y
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE_DEMUX is not set
> CONFIG_NET_IP_TUNNEL=y
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_NET_IPVTI is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_XFRM_TUNNEL is not set
> CONFIG_INET_TUNNEL=y
> CONFIG_INET_XFRM_MODE_TRANSPORT=y
> CONFIG_INET_XFRM_MODE_TUNNEL=y
> # CONFIG_INET_XFRM_MODE_BEET is not set
> CONFIG_INET_LRO=y
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> # CONFIG_INET_UDP_DIAG is not set
> # CONFIG_TCP_CONG_ADVANCED is not set
> CONFIG_TCP_CONG_CUBIC=y
> CONFIG_DEFAULT_TCP_CONG="cubic"
> # CONFIG_TCP_MD5SIG is not set
> CONFIG_IPV6=y
> # CONFIG_IPV6_PRIVACY is not set
> # CONFIG_IPV6_ROUTER_PREF is not set
> # CONFIG_IPV6_OPTIMISTIC_DAD is not set
> # CONFIG_INET6_AH is not set
> # CONFIG_INET6_ESP is not set
> # CONFIG_INET6_IPCOMP is not set
> # CONFIG_IPV6_MIP6 is not set
> # CONFIG_INET6_XFRM_TUNNEL is not set
> # CONFIG_INET6_TUNNEL is not set
> CONFIG_INET6_XFRM_MODE_TRANSPORT=y
> CONFIG_INET6_XFRM_MODE_TUNNEL=y
> # CONFIG_INET6_XFRM_MODE_BEET is not set
> # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
> CONFIG_IPV6_SIT=y
> # CONFIG_IPV6_SIT_6RD is not set
> CONFIG_IPV6_NDISC_NODETYPE=y
> # CONFIG_IPV6_TUNNEL is not set
> # CONFIG_IPV6_GRE is not set
> # CONFIG_IPV6_MULTIPLE_TABLES is not set
> # CONFIG_IPV6_MROUTE is not set
> # CONFIG_NETWORK_SECMARK is not set
> # CONFIG_NETWORK_PHY_TIMESTAMPING is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_NETFILTER_ADVANCED=y
> CONFIG_BRIDGE_NETFILTER=y
>
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_NETLINK=m
> # CONFIG_NETFILTER_NETLINK_ACCT is not set
> CONFIG_NETFILTER_NETLINK_QUEUE=m
> CONFIG_NETFILTER_NETLINK_LOG=m
> CONFIG_NF_CONNTRACK=m
> CONFIG_NF_CONNTRACK_MARK=y
> CONFIG_NF_CONNTRACK_PROCFS=y
> CONFIG_NF_CONNTRACK_EVENTS=y
> # CONFIG_NF_CONNTRACK_TIMEOUT is not set
> # CONFIG_NF_CONNTRACK_TIMESTAMP is not set
> # CONFIG_NF_CT_PROTO_DCCP is not set
> CONFIG_NF_CT_PROTO_SCTP=m
> CONFIG_NF_CT_PROTO_UDPLITE=m
> # CONFIG_NF_CONNTRACK_AMANDA is not set
> CONFIG_NF_CONNTRACK_FTP=m
> # CONFIG_NF_CONNTRACK_H323 is not set
> CONFIG_NF_CONNTRACK_IRC=m
> CONFIG_NF_CONNTRACK_BROADCAST=m
> CONFIG_NF_CONNTRACK_NETBIOS_NS=m
> # CONFIG_NF_CONNTRACK_SNMP is not set
> # CONFIG_NF_CONNTRACK_PPTP is not set
> # CONFIG_NF_CONNTRACK_SANE is not set
> # CONFIG_NF_CONNTRACK_SIP is not set
> CONFIG_NF_CONNTRACK_TFTP=m
> # CONFIG_NF_CT_NETLINK is not set
> # CONFIG_NF_CT_NETLINK_TIMEOUT is not set
> # CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
> # CONFIG_NETFILTER_TPROXY is not set
> CONFIG_NETFILTER_XTABLES=m
>
> #
> # Xtables combined modules
> #
> CONFIG_NETFILTER_XT_MARK=m
> CONFIG_NETFILTER_XT_CONNMARK=m
>
> #
> # Xtables targets
> #
> # CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
> CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
> # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
> # CONFIG_NETFILTER_XT_TARGET_CT is not set
> # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
> CONFIG_NETFILTER_XT_TARGET_HL=m
> # CONFIG_NETFILTER_XT_TARGET_HMARK is not set
> # CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
> # CONFIG_NETFILTER_XT_TARGET_LED is not set
> # CONFIG_NETFILTER_XT_TARGET_LOG is not set
> CONFIG_NETFILTER_XT_TARGET_MARK=m
> CONFIG_NETFILTER_XT_TARGET_NFLOG=m
> CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
> # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
> CONFIG_NETFILTER_XT_TARGET_RATEEST=m
> # CONFIG_NETFILTER_XT_TARGET_TEE is not set
> # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
> CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
> # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
>
> #
> # Xtables matches
> #
> # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
> # CONFIG_NETFILTER_XT_MATCH_BPF is not set
> # CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
> CONFIG_NETFILTER_XT_MATCH_COMMENT=m
> CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
> # CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
> CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
> CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
> CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
> # CONFIG_NETFILTER_XT_MATCH_CPU is not set
> CONFIG_NETFILTER_XT_MATCH_DCCP=m
> # CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
> CONFIG_NETFILTER_XT_MATCH_DSCP=m
> CONFIG_NETFILTER_XT_MATCH_ECN=m
> CONFIG_NETFILTER_XT_MATCH_ESP=m
> CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
> CONFIG_NETFILTER_XT_MATCH_HELPER=m
> CONFIG_NETFILTER_XT_MATCH_HL=m
> CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
> CONFIG_NETFILTER_XT_MATCH_LENGTH=m
> CONFIG_NETFILTER_XT_MATCH_LIMIT=m
> CONFIG_NETFILTER_XT_MATCH_MAC=m
> CONFIG_NETFILTER_XT_MATCH_MARK=m
> CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
> # CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
> # CONFIG_NETFILTER_XT_MATCH_OSF is not set
> CONFIG_NETFILTER_XT_MATCH_OWNER=m
> CONFIG_NETFILTER_XT_MATCH_POLICY=m
> # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
> CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
> CONFIG_NETFILTER_XT_MATCH_QUOTA=m
> CONFIG_NETFILTER_XT_MATCH_RATEEST=m
> # CONFIG_NETFILTER_XT_MATCH_REALM is not set
> # CONFIG_NETFILTER_XT_MATCH_RECENT is not set
> CONFIG_NETFILTER_XT_MATCH_SCTP=m
> CONFIG_NETFILTER_XT_MATCH_STATE=m
> CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
> CONFIG_NETFILTER_XT_MATCH_STRING=m
> CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
> CONFIG_NETFILTER_XT_MATCH_TIME=m
> CONFIG_NETFILTER_XT_MATCH_U32=m
> # CONFIG_IP_SET is not set
> # CONFIG_IP_VS is not set
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_NF_DEFRAG_IPV4=m
> CONFIG_NF_CONNTRACK_IPV4=m
> CONFIG_NF_CONNTRACK_PROC_COMPAT=y
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_AH=m
> CONFIG_IP_NF_MATCH_ECN=m
> # CONFIG_IP_NF_MATCH_RPFILTER is not set
> CONFIG_IP_NF_MATCH_TTL=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_TARGET_ULOG=m
> # CONFIG_NF_NAT_IPV4 is not set
> CONFIG_IP_NF_MANGLE=m
> CONFIG_IP_NF_TARGET_CLUSTERIP=m
> CONFIG_IP_NF_TARGET_ECN=m
> CONFIG_IP_NF_TARGET_TTL=m
> CONFIG_IP_NF_RAW=m
> CONFIG_IP_NF_ARPTABLES=m
> CONFIG_IP_NF_ARPFILTER=m
> CONFIG_IP_NF_ARP_MANGLE=m
>
> #
> # IPv6: Netfilter Configuration
> #
> # CONFIG_NF_DEFRAG_IPV6 is not set
> # CONFIG_NF_CONNTRACK_IPV6 is not set
> # CONFIG_IP6_NF_IPTABLES is not set
> # CONFIG_BRIDGE_NF_EBTABLES is not set
> # CONFIG_IP_DCCP is not set
> # CONFIG_IP_SCTP is not set
> # CONFIG_RDS is not set
> # CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_L2TP is not set
> CONFIG_STP=y
> CONFIG_BRIDGE=y
> CONFIG_BRIDGE_IGMP_SNOOPING=y
> CONFIG_HAVE_NET_DSA=y
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> CONFIG_LLC=y
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_PHONET is not set
> # CONFIG_IEEE802154 is not set
> # CONFIG_NET_SCHED is not set
> # CONFIG_DCB is not set
> CONFIG_DNS_RESOLVER=y
> # CONFIG_BATMAN_ADV is not set
> # CONFIG_OPENVSWITCH is not set
> # CONFIG_VSOCKETS is not set
> # CONFIG_NETLINK_MMAP is not set
> # CONFIG_NETLINK_DIAG is not set
> CONFIG_RPS=y
> CONFIG_RFS_ACCEL=y
> CONFIG_XPS=y
> # CONFIG_NETPRIO_CGROUP is not set
> CONFIG_BQL=y
> # CONFIG_BPF_JIT is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_NET_TCPPROBE is not set
> # CONFIG_NET_DROP_MONITOR is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_CAN is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_AF_RXRPC is not set
> CONFIG_FIB_RULES=y
> CONFIG_WIRELESS=y
> CONFIG_WEXT_CORE=y
> CONFIG_WEXT_PROC=y
> CONFIG_CFG80211=m
> # CONFIG_NL80211_TESTMODE is not set
> # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
> # CONFIG_CFG80211_REG_DEBUG is not set
> CONFIG_CFG80211_DEFAULT_PS=y
> # CONFIG_CFG80211_DEBUGFS is not set
> # CONFIG_CFG80211_INTERNAL_REGDB is not set
> CONFIG_CFG80211_WEXT=y
> # CONFIG_LIB80211 is not set
> CONFIG_MAC80211=m
> CONFIG_MAC80211_HAS_RC=y
> CONFIG_MAC80211_RC_MINSTREL=y
> CONFIG_MAC80211_RC_MINSTREL_HT=y
> CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
> CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
> # CONFIG_MAC80211_MESH is not set
> CONFIG_MAC80211_LEDS=y
> # CONFIG_MAC80211_DEBUGFS is not set
> # CONFIG_MAC80211_MESSAGE_TRACING is not set
> # CONFIG_MAC80211_DEBUG_MENU is not set
> # CONFIG_WIMAX is not set
> # CONFIG_RFKILL is not set
> # CONFIG_NET_9P is not set
> # CONFIG_CAIF is not set
> # CONFIG_CEPH_LIB is not set
> # CONFIG_NFC is not set
> CONFIG_HAVE_BPF_JIT=y
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> # CONFIG_DEVTMPFS is not set
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> # CONFIG_FIRMWARE_IN_KERNEL is not set
> CONFIG_EXTRA_FIRMWARE=""
> CONFIG_FW_LOADER_USER_HELPER=y
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_DEBUG_DEVRES is not set
> # CONFIG_SYS_HYPERVISOR is not set
> # CONFIG_GENERIC_CPU_DEVICES is not set
> CONFIG_DMA_SHARED_BUFFER=y
>
> #
> # Bus devices
> #
> CONFIG_CONNECTOR=m
> # CONFIG_MTD is not set
> # CONFIG_PARPORT is not set
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG_MESSAGES is not set
>
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
> CONFIG_BLK_DEV=y
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_DRBD is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_NVME is not set
> # CONFIG_BLK_DEV_SX8 is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=4096
> # CONFIG_BLK_DEV_XIP is not set
> # CONFIG_CDROM_PKTCDVD is not set
> # CONFIG_ATA_OVER_ETH is not set
> # CONFIG_BLK_DEV_HD is not set
> # CONFIG_BLK_DEV_RBD is not set
> # CONFIG_BLK_DEV_RSXX is not set
>
> #
> # Misc devices
> #
> # CONFIG_SENSORS_LIS3LV02D is not set
> # CONFIG_AD525X_DPOT is not set
> # CONFIG_DUMMY_IRQ is not set
> # CONFIG_IBM_ASM is not set
> # CONFIG_PHANTOM is not set
> # CONFIG_INTEL_MID_PTI is not set
> # CONFIG_SGI_IOC4 is not set
> CONFIG_TIFM_CORE=m
> CONFIG_TIFM_7XX1=m
> # CONFIG_ICS932S401 is not set
> # CONFIG_ATMEL_SSC is not set
> # CONFIG_ENCLOSURE_SERVICES is not set
> # CONFIG_HP_ILO is not set
> # CONFIG_APDS9802ALS is not set
> # CONFIG_ISL29003 is not set
> # CONFIG_ISL29020 is not set
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_SENSORS_BH1780 is not set
> # CONFIG_SENSORS_BH1770 is not set
> # CONFIG_SENSORS_APDS990X is not set
> # CONFIG_HMC6352 is not set
> # CONFIG_DS1682 is not set
> # CONFIG_BMP085_I2C is not set
> # CONFIG_PCH_PHUB is not set
> # CONFIG_USB_SWITCH_FSA9480 is not set
> # CONFIG_SRAM is not set
> # CONFIG_C2PORT is not set
>
> #
> # EEPROM support
> #
> # CONFIG_EEPROM_AT24 is not set
> # CONFIG_EEPROM_LEGACY is not set
> # CONFIG_EEPROM_MAX6875 is not set
> # CONFIG_EEPROM_93CX6 is not set
> CONFIG_CB710_CORE=m
> # CONFIG_CB710_DEBUG is not set
> CONFIG_CB710_DEBUG_ASSUMPTIONS=y
>
> #
> # Texas Instruments shared transport line discipline
> #
> # CONFIG_SENSORS_LIS3_I2C is not set
>
> #
> # Altera FPGA firmware download module
> #
> # CONFIG_ALTERA_STAPL is not set
> # CONFIG_VMWARE_VMCI is not set
> CONFIG_HAVE_IDE=y
> CONFIG_IDE=y
>
> #
> # Please see Documentation/ide/ide.txt for help/info on IDE drives
> #
> CONFIG_IDE_XFER_MODE=y
> CONFIG_IDE_ATAPI=y
> # CONFIG_BLK_DEV_IDE_SATA is not set
> CONFIG_IDE_GD=y
> CONFIG_IDE_GD_ATA=y
> # CONFIG_IDE_GD_ATAPI is not set
> CONFIG_BLK_DEV_IDECD=y
> CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> CONFIG_BLK_DEV_IDEACPI=y
> # CONFIG_IDE_TASK_IOCTL is not set
> CONFIG_IDE_PROC_FS=y
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> # CONFIG_BLK_DEV_PLATFORM is not set
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_IDEPNP is not set
> CONFIG_BLK_DEV_IDEDMA_SFF=y
>
> #
> # PCI IDE chipsets support
> #
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_PCIBUS_ORDER=y
> # CONFIG_BLK_DEV_GENERIC is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_ATIIXP is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_JMICRON is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_IT8172 is not set
> # CONFIG_BLK_DEV_IT8213 is not set
> # CONFIG_BLK_DEV_IT821X is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_BLK_DEV_TC86C001 is not set
> CONFIG_BLK_DEV_IDEDMA=y
>
> #
> # SCSI device support
> #
> CONFIG_SCSI_MOD=y
> # CONFIG_RAID_ATTRS is not set
> CONFIG_SCSI=y
> CONFIG_SCSI_DMA=y
> # CONFIG_SCSI_TGT is not set
> # CONFIG_SCSI_NETLINK is not set
> # CONFIG_SCSI_PROC_FS is not set
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_CHR_DEV_SG=y
> # CONFIG_CHR_DEV_SCH is not set
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
> # CONFIG_SCSI_SCAN_ASYNC is not set
>
> #
> # SCSI Transports
> #
> CONFIG_SCSI_SPI_ATTRS=y
> # CONFIG_SCSI_FC_ATTRS is not set
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> # CONFIG_SCSI_SAS_ATTRS is not set
> # CONFIG_SCSI_SAS_LIBSAS is not set
> # CONFIG_SCSI_SRP_ATTRS is not set
> # CONFIG_SCSI_LOWLEVEL is not set
> # CONFIG_SCSI_DH is not set
> # CONFIG_SCSI_OSD_INITIATOR is not set
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_VERBOSE_ERROR=y
> CONFIG_ATA_ACPI=y
> # CONFIG_SATA_ZPODD is not set
> # CONFIG_SATA_PMP is not set
>
> #
> # Controllers with non-SFF native interface
> #
> CONFIG_SATA_AHCI=y
> # CONFIG_SATA_AHCI_PLATFORM is not set
> # CONFIG_SATA_INIC162X is not set
> # CONFIG_SATA_ACARD_AHCI is not set
> # CONFIG_SATA_SIL24 is not set
> CONFIG_ATA_SFF=y
>
> #
> # SFF controllers with custom DMA interface
> #
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> # CONFIG_SATA_SX4 is not set
> CONFIG_ATA_BMDMA=y
>
> #
> # SATA SFF controllers with BMDMA
> #
> CONFIG_ATA_PIIX=y
> # CONFIG_SATA_HIGHBANK is not set
> # CONFIG_SATA_MV is not set
> # CONFIG_SATA_NV is not set
> # CONFIG_SATA_PROMISE is not set
> # CONFIG_SATA_SIL is not set
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_SVW is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
>
> #
> # PATA SFF controllers with BMDMA
> #
> # CONFIG_PATA_ALI is not set
> # CONFIG_PATA_AMD is not set
> # CONFIG_PATA_ARASAN_CF is not set
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_ATP867X is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CS5520 is not set
> # CONFIG_PATA_CS5530 is not set
> # CONFIG_PATA_CS5536 is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT8213 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_MARVELL is not set
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NINJA32 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OLDPIIX is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PDC2027X is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RDC is not set
> # CONFIG_PATA_SC1200 is not set
> # CONFIG_PATA_SCH is not set
> # CONFIG_PATA_SERVERWORKS is not set
> # CONFIG_PATA_SIL680 is not set
> # CONFIG_PATA_SIS is not set
> # CONFIG_PATA_TOSHIBA is not set
> # CONFIG_PATA_TRIFLEX is not set
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
>
> #
> # PIO-only SFF controllers
> #
> # CONFIG_PATA_CMD640_PCI is not set
> # CONFIG_PATA_MPIIX is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_RZ1000 is not set
>
> #
> # Generic fallback / legacy drivers
> #
> # CONFIG_PATA_ACPI is not set
> # CONFIG_ATA_GENERIC is not set
> # CONFIG_PATA_LEGACY is not set
> # CONFIG_MD is not set
> # CONFIG_TARGET_CORE is not set
> # CONFIG_FUSION is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_FIREWIRE is not set
> # CONFIG_FIREWIRE_NOSY is not set
> # CONFIG_I2O is not set
> # CONFIG_MACINTOSH_DRIVERS is not set
> CONFIG_NETDEVICES=y
> CONFIG_NET_CORE=y
> # CONFIG_BONDING is not set
> CONFIG_DUMMY=m
> # CONFIG_EQUALIZER is not set
> # CONFIG_NET_FC is not set
> # CONFIG_MII is not set
> # CONFIG_NET_TEAM is not set
> # CONFIG_MACVLAN is not set
> # CONFIG_VXLAN is not set
> CONFIG_NETCONSOLE=y
> CONFIG_NETPOLL=y
> # CONFIG_NETPOLL_TRAP is not set
> CONFIG_NET_POLL_CONTROLLER=y
> CONFIG_TUN=m
> # CONFIG_VETH is not set
> # CONFIG_ARCNET is not set
>
> #
> # CAIF transport drivers
> #
> # CONFIG_VHOST_NET is not set
>
> #
> # Distributed Switch Architecture drivers
> #
> # CONFIG_NET_DSA_MV88E6XXX is not set
> # CONFIG_NET_DSA_MV88E6060 is not set
> # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
> # CONFIG_NET_DSA_MV88E6131 is not set
> # CONFIG_NET_DSA_MV88E6123_61_65 is not set
> CONFIG_ETHERNET=y
> CONFIG_NET_VENDOR_3COM=y
> # CONFIG_VORTEX is not set
> # CONFIG_TYPHOON is not set
> CONFIG_NET_VENDOR_ADAPTEC=y
> # CONFIG_ADAPTEC_STARFIRE is not set
> CONFIG_NET_VENDOR_ALTEON=y
> # CONFIG_ACENIC is not set
> CONFIG_NET_VENDOR_AMD=y
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_PCNET32 is not set
> CONFIG_NET_VENDOR_ATHEROS=y
> # CONFIG_ATL2 is not set
> # CONFIG_ATL1 is not set
> # CONFIG_ATL1E is not set
> # CONFIG_ATL1C is not set
> CONFIG_NET_CADENCE=y
> # CONFIG_ARM_AT91_ETHER is not set
> # CONFIG_MACB is not set
> CONFIG_NET_VENDOR_BROADCOM=y
> # CONFIG_B44 is not set
> # CONFIG_BNX2 is not set
> # CONFIG_CNIC is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2X is not set
> CONFIG_NET_VENDOR_BROCADE=y
> # CONFIG_BNA is not set
> # CONFIG_NET_CALXEDA_XGMAC is not set
> CONFIG_NET_VENDOR_CHELSIO=y
> # CONFIG_CHELSIO_T1 is not set
> # CONFIG_CHELSIO_T3 is not set
> # CONFIG_CHELSIO_T4 is not set
> # CONFIG_CHELSIO_T4VF is not set
> CONFIG_NET_VENDOR_CISCO=y
> # CONFIG_ENIC is not set
> # CONFIG_DNET is not set
> CONFIG_NET_VENDOR_DEC=y
> # CONFIG_NET_TULIP is not set
> CONFIG_NET_VENDOR_DLINK=y
> # CONFIG_DL2K is not set
> # CONFIG_SUNDANCE is not set
> CONFIG_NET_VENDOR_EMULEX=y
> # CONFIG_BE2NET is not set
> CONFIG_NET_VENDOR_EXAR=y
> # CONFIG_S2IO is not set
> # CONFIG_VXGE is not set
> CONFIG_NET_VENDOR_HP=y
> # CONFIG_HP100 is not set
> CONFIG_NET_VENDOR_INTEL=y
> # CONFIG_E100 is not set
> # CONFIG_E1000 is not set
> CONFIG_E1000E=y
> # CONFIG_IGB is not set
> # CONFIG_IGBVF is not set
> # CONFIG_IXGB is not set
> # CONFIG_IXGBE is not set
> # CONFIG_IXGBEVF is not set
> # CONFIG_NET_VENDOR_I825XX is not set
> # CONFIG_IP1000 is not set
> # CONFIG_JME is not set
> CONFIG_NET_VENDOR_MARVELL=y
> # CONFIG_MVMDIO is not set
> # CONFIG_SKGE is not set
> CONFIG_SKY2=y
> # CONFIG_SKY2_DEBUG is not set
> CONFIG_NET_VENDOR_MELLANOX=y
> # CONFIG_MLX4_EN is not set
> # CONFIG_MLX4_CORE is not set
> CONFIG_NET_VENDOR_MICREL=y
> # CONFIG_KS8851_MLL is not set
> # CONFIG_KSZ884X_PCI is not set
> CONFIG_NET_VENDOR_MYRI=y
> # CONFIG_MYRI10GE is not set
> # CONFIG_FEALNX is not set
> CONFIG_NET_VENDOR_NATSEMI=y
> # CONFIG_NATSEMI is not set
> # CONFIG_NS83820 is not set
> CONFIG_NET_VENDOR_8390=y
> # CONFIG_NE2K_PCI is not set
> CONFIG_NET_VENDOR_NVIDIA=y
> # CONFIG_FORCEDETH is not set
> CONFIG_NET_VENDOR_OKI=y
> # CONFIG_PCH_GBE is not set
> # CONFIG_ETHOC is not set
> # CONFIG_NET_PACKET_ENGINE is not set
> CONFIG_NET_VENDOR_QLOGIC=y
> # CONFIG_QLA3XXX is not set
> # CONFIG_QLCNIC is not set
> # CONFIG_QLGE is not set
> # CONFIG_NETXEN_NIC is not set
> CONFIG_NET_VENDOR_REALTEK=y
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_R8169 is not set
> CONFIG_NET_VENDOR_RDC=y
> # CONFIG_R6040 is not set
> CONFIG_NET_VENDOR_SEEQ=y
> CONFIG_NET_VENDOR_SILAN=y
> # CONFIG_SC92031 is not set
> CONFIG_NET_VENDOR_SIS=y
> # CONFIG_SIS900 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SFC is not set
> CONFIG_NET_VENDOR_SMSC=y
> # CONFIG_EPIC100 is not set
> # CONFIG_SMSC9420 is not set
> CONFIG_NET_VENDOR_STMICRO=y
> # CONFIG_STMMAC_ETH is not set
> CONFIG_NET_VENDOR_SUN=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_CASSINI is not set
> # CONFIG_NIU is not set
> CONFIG_NET_VENDOR_TEHUTI=y
> # CONFIG_TEHUTI is not set
> CONFIG_NET_VENDOR_TI=y
> # CONFIG_TLAN is not set
> CONFIG_NET_VENDOR_VIA=y
> # CONFIG_VIA_RHINE is not set
> # CONFIG_VIA_VELOCITY is not set
> CONFIG_NET_VENDOR_WIZNET=y
> # CONFIG_WIZNET_W5100 is not set
> # CONFIG_WIZNET_W5300 is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_NET_SB1000 is not set
> # CONFIG_PHYLIB is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
>
> #
> # USB Network Adapters
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_RTL8152 is not set
> # CONFIG_USB_USBNET is not set
> # CONFIG_USB_IPHETH is not set
> CONFIG_WLAN=y
> # CONFIG_LIBERTAS_THINFIRM is not set
> # CONFIG_AIRO is not set
> # CONFIG_ATMEL is not set
> # CONFIG_AT76C50X_USB is not set
> # CONFIG_PRISM54 is not set
> # CONFIG_USB_ZD1201 is not set
> # CONFIG_USB_NET_RNDIS_WLAN is not set
> # CONFIG_RTL8180 is not set
> # CONFIG_RTL8187 is not set
> # CONFIG_ADM8211 is not set
> # CONFIG_MAC80211_HWSIM is not set
> # CONFIG_MWL8K is not set
> # CONFIG_ATH_CARDS is not set
> # CONFIG_B43 is not set
> # CONFIG_B43LEGACY is not set
> # CONFIG_BRCMFMAC is not set
> # CONFIG_HOSTAP is not set
> # CONFIG_IPW2100 is not set
> # CONFIG_IPW2200 is not set
> CONFIG_IWLWIFI=m
> CONFIG_IWLDVM=m
> # CONFIG_IWLMVM is not set
> CONFIG_IWLWIFI_OPMODE_MODULAR=y
>
> #
> # Debugging Options
> #
> # CONFIG_IWLWIFI_DEBUG is not set
> # CONFIG_IWLWIFI_DEVICE_TRACING is not set
> CONFIG_IWLWIFI_P2P=y
> # CONFIG_IWL4965 is not set
> # CONFIG_IWL3945 is not set
> # CONFIG_LIBERTAS is not set
> # CONFIG_HERMES is not set
> # CONFIG_P54_COMMON is not set
> # CONFIG_RT2X00 is not set
> # CONFIG_RTLWIFI is not set
> # CONFIG_WL_TI is not set
> # CONFIG_ZD1211RW is not set
> # CONFIG_MWIFIEX is not set
>
> #
> # Enable WiMAX (Networking options) to see the WiMAX drivers
> #
> # CONFIG_WAN is not set
> # CONFIG_VMXNET3 is not set
> # CONFIG_ISDN is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
> # CONFIG_INPUT_FF_MEMLESS is not set
> # CONFIG_INPUT_POLLDEV is not set
> # CONFIG_INPUT_SPARSEKMAP is not set
> # CONFIG_INPUT_MATRIXKMAP is not set
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> # CONFIG_KEYBOARD_ADP5588 is not set
> # CONFIG_KEYBOARD_ADP5589 is not set
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_QT1070 is not set
> # CONFIG_KEYBOARD_QT2160 is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_TCA6416 is not set
> # CONFIG_KEYBOARD_TCA8418 is not set
> # CONFIG_KEYBOARD_LM8323 is not set
> # CONFIG_KEYBOARD_LM8333 is not set
> # CONFIG_KEYBOARD_MAX7359 is not set
> # CONFIG_KEYBOARD_MCS is not set
> # CONFIG_KEYBOARD_MPR121 is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_OPENCORES is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_PS2_ALPS=y
> CONFIG_MOUSE_PS2_LOGIPS2PP=y
> CONFIG_MOUSE_PS2_SYNAPTICS=y
> CONFIG_MOUSE_PS2_CYPRESS=y
> CONFIG_MOUSE_PS2_LIFEBOOK=y
> CONFIG_MOUSE_PS2_TRACKPOINT=y
> # CONFIG_MOUSE_PS2_ELANTECH is not set
> # CONFIG_MOUSE_PS2_SENTELIC is not set
> # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_APPLETOUCH is not set
> # CONFIG_MOUSE_BCM5974 is not set
> # CONFIG_MOUSE_CYAPA is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_MOUSE_SYNAPTICS_I2C is not set
> # CONFIG_MOUSE_SYNAPTICS_USB is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TABLET is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_SERIO_ALTERA_PS2 is not set
> # CONFIG_SERIO_PS2MULT is not set
> # CONFIG_SERIO_ARC_PS2 is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_TTY=y
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_VT_CONSOLE_SLEEP=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_VT_HW_CONSOLE_BINDING is not set
> CONFIG_UNIX98_PTYS=y
> # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
> # CONFIG_SERIAL_NONSTANDARD is not set
> # CONFIG_NOZOMI is not set
> # CONFIG_N_GSM is not set
> # CONFIG_TRACE_SINK is not set
> CONFIG_DEVKMEM=y
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
> CONFIG_SERIAL_8250_PNP=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_DMA=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
> # CONFIG_SERIAL_8250_DW is not set
>
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_KGDB_NMI is not set
> # CONFIG_SERIAL_MFD_HSU is not set
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_CONSOLE_POLL=y
> # CONFIG_SERIAL_JSM is not set
> # CONFIG_SERIAL_SCCNXP is not set
> # CONFIG_SERIAL_TIMBERDALE is not set
> # CONFIG_SERIAL_ALTERA_JTAGUART is not set
> # CONFIG_SERIAL_ALTERA_UART is not set
> # CONFIG_SERIAL_PCH_UART is not set
> # CONFIG_SERIAL_ARC is not set
> # CONFIG_SERIAL_RP2 is not set
> # CONFIG_IPMI_HANDLER is not set
> CONFIG_HW_RANDOM=y
> # CONFIG_HW_RANDOM_TIMERIOMEM is not set
> CONFIG_HW_RANDOM_INTEL=y
> # CONFIG_HW_RANDOM_AMD is not set
> # CONFIG_HW_RANDOM_VIA is not set
> # CONFIG_NVRAM is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_MWAVE is not set
> CONFIG_RAW_DRIVER=y
> CONFIG_MAX_RAW_DEVS=256
> CONFIG_HPET=y
> CONFIG_HPET_MMAP=y
> # CONFIG_HANGCHECK_TIMER is not set
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
> CONFIG_DEVPORT=y
> CONFIG_I2C=m
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_COMPAT=y
> # CONFIG_I2C_CHARDEV is not set
> # CONFIG_I2C_MUX is not set
> CONFIG_I2C_HELPER_AUTO=y
> CONFIG_I2C_ALGOBIT=m
>
> #
> # I2C Hardware Bus support
> #
>
> #
> # PC SMBus host controller drivers
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> CONFIG_I2C_I801=m
> # CONFIG_I2C_ISCH is not set
> # CONFIG_I2C_ISMT is not set
> # CONFIG_I2C_PIIX4 is not set
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
>
> #
> # ACPI drivers
> #
> # CONFIG_I2C_SCMI is not set
>
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> # CONFIG_I2C_DESIGNWARE_PCI is not set
> # CONFIG_I2C_EG20T is not set
> # CONFIG_I2C_INTEL_MID is not set
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_PCA_PLATFORM is not set
> # CONFIG_I2C_PXA_PCI is not set
> # CONFIG_I2C_SIMTEC is not set
> # CONFIG_I2C_XILINX is not set
>
> #
> # External I2C/SMBus adapter drivers
> #
> # CONFIG_I2C_DIOLAN_U2C is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_TAOS_EVM is not set
> # CONFIG_I2C_TINY_USB is not set
>
> #
> # Other I2C/SMBus bus drivers
> #
> # CONFIG_I2C_STUB is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_SPI is not set
>
> #
> # Qualcomm MSM SSBI bus support
> #
> # CONFIG_SSBI is not set
> # CONFIG_HSI is not set
>
> #
> # PPS support
> #
> CONFIG_PPS=y
> # CONFIG_PPS_DEBUG is not set
>
> #
> # PPS clients support
> #
> # CONFIG_PPS_CLIENT_KTIMER is not set
> # CONFIG_PPS_CLIENT_LDISC is not set
> # CONFIG_PPS_CLIENT_GPIO is not set
>
> #
> # PPS generators support
> #
>
> #
> # PTP clock support
> #
> CONFIG_PTP_1588_CLOCK=y
>
> #
> # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
> #
> # CONFIG_PTP_1588_CLOCK_PCH is not set
> CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> CONFIG_GPIO_DEVRES=y
> # CONFIG_GPIOLIB is not set
> # CONFIG_W1 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_TEST_POWER is not set
> # CONFIG_BATTERY_DS2780 is not set
> # CONFIG_BATTERY_DS2781 is not set
> # CONFIG_BATTERY_DS2782 is not set
> # CONFIG_BATTERY_SBS is not set
> # CONFIG_BATTERY_BQ27x00 is not set
> # CONFIG_BATTERY_MAX17040 is not set
> # CONFIG_BATTERY_MAX17042 is not set
> # CONFIG_CHARGER_MAX8903 is not set
> # CONFIG_CHARGER_LP8727 is not set
> # CONFIG_CHARGER_BQ2415X is not set
> # CONFIG_CHARGER_SMB347 is not set
> # CONFIG_BATTERY_GOLDFISH is not set
> # CONFIG_POWER_RESET is not set
> # CONFIG_POWER_AVS is not set
> CONFIG_HWMON=m
> # CONFIG_HWMON_VID is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
>
> #
> # Native drivers
> #
> # CONFIG_SENSORS_ABITUGURU is not set
> # CONFIG_SENSORS_ABITUGURU3 is not set
> # CONFIG_SENSORS_AD7414 is not set
> # CONFIG_SENSORS_AD7418 is not set
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ADM1025 is not set
> # CONFIG_SENSORS_ADM1026 is not set
> # CONFIG_SENSORS_ADM1029 is not set
> # CONFIG_SENSORS_ADM1031 is not set
> # CONFIG_SENSORS_ADM9240 is not set
> # CONFIG_SENSORS_ADT7410 is not set
> # CONFIG_SENSORS_ADT7411 is not set
> # CONFIG_SENSORS_ADT7462 is not set
> # CONFIG_SENSORS_ADT7470 is not set
> # CONFIG_SENSORS_ADT7475 is not set
> # CONFIG_SENSORS_ASC7621 is not set
> # CONFIG_SENSORS_K8TEMP is not set
> # CONFIG_SENSORS_K10TEMP is not set
> # CONFIG_SENSORS_FAM15H_POWER is not set
> # CONFIG_SENSORS_ASB100 is not set
> # CONFIG_SENSORS_ATXP1 is not set
> # CONFIG_SENSORS_DS620 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_I5K_AMB is not set
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_SENSORS_F71882FG is not set
> # CONFIG_SENSORS_F75375S is not set
> # CONFIG_SENSORS_FSCHMD is not set
> # CONFIG_SENSORS_G760A is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_GL520SM is not set
> # CONFIG_SENSORS_HIH6130 is not set
> CONFIG_SENSORS_CORETEMP=m
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_JC42 is not set
> # CONFIG_SENSORS_LINEAGE is not set
> # CONFIG_SENSORS_LM63 is not set
> # CONFIG_SENSORS_LM73 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM77 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM83 is not set
> # CONFIG_SENSORS_LM85 is not set
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_LM90 is not set
> # CONFIG_SENSORS_LM92 is not set
> # CONFIG_SENSORS_LM93 is not set
> # CONFIG_SENSORS_LTC4151 is not set
> # CONFIG_SENSORS_LTC4215 is not set
> # CONFIG_SENSORS_LTC4245 is not set
> # CONFIG_SENSORS_LTC4261 is not set
> # CONFIG_SENSORS_LM95234 is not set
> # CONFIG_SENSORS_LM95241 is not set
> # CONFIG_SENSORS_LM95245 is not set
> # CONFIG_SENSORS_MAX16065 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_MAX1668 is not set
> # CONFIG_SENSORS_MAX197 is not set
> # CONFIG_SENSORS_MAX6639 is not set
> # CONFIG_SENSORS_MAX6642 is not set
> # CONFIG_SENSORS_MAX6650 is not set
> # CONFIG_SENSORS_MAX6697 is not set
> # CONFIG_SENSORS_MCP3021 is not set
> # CONFIG_SENSORS_NCT6775 is not set
> # CONFIG_SENSORS_NTC_THERMISTOR is not set
> # CONFIG_SENSORS_PC87360 is not set
> # CONFIG_SENSORS_PC87427 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_PMBUS is not set
> # CONFIG_SENSORS_SHT21 is not set
> # CONFIG_SENSORS_SIS5595 is not set
> # CONFIG_SENSORS_SMM665 is not set
> # CONFIG_SENSORS_DME1737 is not set
> # CONFIG_SENSORS_EMC1403 is not set
> # CONFIG_SENSORS_EMC2103 is not set
> # CONFIG_SENSORS_EMC6W201 is not set
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_SMSC47M192 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> # CONFIG_SENSORS_SCH56XX_COMMON is not set
> # CONFIG_SENSORS_ADS1015 is not set
> # CONFIG_SENSORS_ADS7828 is not set
> # CONFIG_SENSORS_AMC6821 is not set
> # CONFIG_SENSORS_INA209 is not set
> # CONFIG_SENSORS_INA2XX is not set
> # CONFIG_SENSORS_THMC50 is not set
> # CONFIG_SENSORS_TMP102 is not set
> # CONFIG_SENSORS_TMP401 is not set
> # CONFIG_SENSORS_TMP421 is not set
> # CONFIG_SENSORS_VIA_CPUTEMP is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_VT1211 is not set
> # CONFIG_SENSORS_VT8231 is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83791D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83793 is not set
> # CONFIG_SENSORS_W83795 is not set
> # CONFIG_SENSORS_W83L785TS is not set
> # CONFIG_SENSORS_W83L786NG is not set
> # CONFIG_SENSORS_W83627HF is not set
> # CONFIG_SENSORS_W83627EHF is not set
> # CONFIG_SENSORS_APPLESMC is not set
>
> #
> # ACPI drivers
> #
> # CONFIG_SENSORS_ACPI_POWER is not set
> # CONFIG_SENSORS_ATK0110 is not set
> CONFIG_THERMAL=y
> CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
> # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
> # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
> # CONFIG_THERMAL_GOV_FAIR_SHARE is not set
> CONFIG_THERMAL_GOV_STEP_WISE=y
> # CONFIG_THERMAL_GOV_USER_SPACE is not set
> # CONFIG_CPU_THERMAL is not set
> # CONFIG_THERMAL_EMULATION is not set
> # CONFIG_INTEL_POWERCLAMP is not set
> # CONFIG_WATCHDOG is not set
> CONFIG_SSB_POSSIBLE=y
>
> #
> # Sonics Silicon Backplane
> #
> # CONFIG_SSB is not set
> CONFIG_BCMA_POSSIBLE=y
>
> #
> # Broadcom specific AMBA
> #
> # CONFIG_BCMA is not set
>
> #
> # Multifunction device drivers
> #
> # CONFIG_MFD_CORE is not set
> # CONFIG_MFD_CS5535 is not set
> # CONFIG_MFD_CROS_EC is not set
> # CONFIG_MFD_MC13XXX_I2C is not set
> # CONFIG_HTC_PASIC3 is not set
> # CONFIG_LPC_ICH is not set
> # CONFIG_LPC_SCH is not set
> # CONFIG_MFD_JANZ_CMODIO is not set
> # CONFIG_MFD_VIPERBOARD is not set
> # CONFIG_MFD_RETU is not set
> # CONFIG_MFD_PCF50633 is not set
> # CONFIG_MFD_RDC321X is not set
> # CONFIG_MFD_RTSX_PCI is not set
> # CONFIG_MFD_SI476X_CORE is not set
> # CONFIG_MFD_SM501 is not set
> # CONFIG_ABX500_CORE is not set
> # CONFIG_MFD_SYSCON is not set
> # CONFIG_MFD_TI_AM335X_TSCADC is not set
> # CONFIG_TPS6105X is not set
> # CONFIG_TPS6507X is not set
> # CONFIG_MFD_TPS65217 is not set
> # CONFIG_MFD_WL1273_CORE is not set
> # CONFIG_MFD_LM3533 is not set
> # CONFIG_MFD_TMIO is not set
> # CONFIG_MFD_VX855 is not set
> # CONFIG_MFD_ARIZONA_I2C is not set
> # CONFIG_REGULATOR is not set
> CONFIG_MEDIA_SUPPORT=m
>
> #
> # Multimedia core support
> #
> CONFIG_MEDIA_CAMERA_SUPPORT=y
> # CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
> # CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
> # CONFIG_MEDIA_RADIO_SUPPORT is not set
> # CONFIG_MEDIA_RC_SUPPORT is not set
> CONFIG_MEDIA_CONTROLLER=y
> CONFIG_VIDEO_DEV=m
> CONFIG_VIDEO_V4L2_SUBDEV_API=y
> CONFIG_VIDEO_V4L2=m
> # CONFIG_VIDEO_ADV_DEBUG is not set
> # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
> CONFIG_VIDEOBUF2_CORE=m
> CONFIG_VIDEOBUF2_MEMOPS=m
> CONFIG_VIDEOBUF2_VMALLOC=m
> # CONFIG_VIDEO_V4L2_INT_DEVICE is not set
> # CONFIG_TTPCI_EEPROM is not set
>
> #
> # Media drivers
> #
> CONFIG_MEDIA_USB_SUPPORT=y
>
> #
> # Webcam devices
> #
> CONFIG_USB_VIDEO_CLASS=m
> CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
> # CONFIG_USB_GSPCA is not set
> # CONFIG_USB_PWC is not set
> # CONFIG_VIDEO_CPIA2 is not set
> # CONFIG_USB_ZR364XX is not set
> # CONFIG_USB_STKWEBCAM is not set
> # CONFIG_USB_S2255 is not set
> # CONFIG_USB_SN9C102 is not set
>
> #
> # Webcam, TV (analog/digital) USB devices
> #
> # CONFIG_VIDEO_EM28XX is not set
> # CONFIG_MEDIA_PCI_SUPPORT is not set
> # CONFIG_V4L_PLATFORM_DRIVERS is not set
> # CONFIG_V4L_MEM2MEM_DRIVERS is not set
> # CONFIG_V4L_TEST_DRIVERS is not set
>
> #
> # Supported MMC/SDIO adapters
> #
> # CONFIG_CYPRESS_FIRMWARE is not set
>
> #
> # Media ancillary drivers (tuners, sensors, i2c, frontends)
> #
> CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
>
> #
> # Audio decoders, processors and mixers
> #
>
> #
> # RDS decoders
> #
>
> #
> # Video decoders
> #
>
> #
> # Video and audio decoders
> #
>
> #
> # Video encoders
> #
>
> #
> # Camera sensor devices
> #
>
> #
> # Flash devices
> #
>
> #
> # Video improvement chips
> #
>
> #
> # Miscelaneous helper chips
> #
>
> #
> # Sensors used on soc_camera driver
> #
>
> #
> # Tools to develop new frontends
> #
> # CONFIG_DVB_DUMMY_FE is not set
>
> #
> # Graphics support
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_VIA is not set
> CONFIG_VGA_ARB=y
> CONFIG_VGA_ARB_MAX_GPUS=16
> # CONFIG_VGA_SWITCHEROO is not set
> CONFIG_DRM=m
> CONFIG_DRM_KMS_HELPER=m
> # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
>
> #
> # I2C encoder or helper chips
> #
> # CONFIG_DRM_I2C_CH7006 is not set
> # CONFIG_DRM_I2C_SIL164 is not set
> # CONFIG_DRM_I2C_NXP_TDA998X is not set
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_NOUVEAU is not set
> CONFIG_DRM_I915=m
> # CONFIG_DRM_I915_KMS is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_DRM_VIA is not set
> # CONFIG_DRM_SAVAGE is not set
> # CONFIG_DRM_VMWGFX is not set
> # CONFIG_DRM_GMA500 is not set
> # CONFIG_DRM_UDL is not set
> # CONFIG_DRM_AST is not set
> # CONFIG_DRM_MGAG200 is not set
> # CONFIG_DRM_CIRRUS_QEMU is not set
> # CONFIG_DRM_QXL is not set
> # CONFIG_VGASTATE is not set
> CONFIG_VIDEO_OUTPUT_CONTROL=m
> CONFIG_HDMI=y
> CONFIG_FB=m
> # CONFIG_FIRMWARE_EDID is not set
> # CONFIG_FB_DDC is not set
> # CONFIG_FB_BOOT_VESA_SUPPORT is not set
> CONFIG_FB_CFB_FILLRECT=m
> CONFIG_FB_CFB_COPYAREA=m
> CONFIG_FB_CFB_IMAGEBLIT=m
> # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> # CONFIG_FB_SYS_FILLRECT is not set
> # CONFIG_FB_SYS_COPYAREA is not set
> # CONFIG_FB_SYS_IMAGEBLIT is not set
> # CONFIG_FB_FOREIGN_ENDIAN is not set
> # CONFIG_FB_SYS_FOPS is not set
> # CONFIG_FB_SVGALIB is not set
> # CONFIG_FB_MACMODES is not set
> # CONFIG_FB_BACKLIGHT is not set
> CONFIG_FB_MODE_HELPERS=y
> # CONFIG_FB_TILEBLITTING is not set
>
> #
> # Frame buffer hardware drivers
> #
> # CONFIG_FB_CIRRUS is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_ARC is not set
> # CONFIG_FB_VGA16 is not set
> # CONFIG_FB_UVESA is not set
> # CONFIG_FB_N411 is not set
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_S1D13XXX is not set
> # CONFIG_FB_NVIDIA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_I740 is not set
> # CONFIG_FB_LE80578 is not set
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_S3 is not set
> # CONFIG_FB_SAVAGE is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_VIA is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_VT8623 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_ARK is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_CARMINE is not set
> # CONFIG_FB_GEODE is not set
> # CONFIG_FB_SMSCUFX is not set
> # CONFIG_FB_UDL is not set
> # CONFIG_FB_GOLDFISH is not set
> # CONFIG_FB_VIRTUAL is not set
> # CONFIG_FB_METRONOME is not set
> # CONFIG_FB_MB862XX is not set
> # CONFIG_FB_BROADSHEET is not set
> # CONFIG_FB_AUO_K190X is not set
> # CONFIG_EXYNOS_VIDEO is not set
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> CONFIG_LCD_CLASS_DEVICE=m
> # CONFIG_LCD_PLATFORM is not set
> CONFIG_BACKLIGHT_CLASS_DEVICE=m
> CONFIG_BACKLIGHT_GENERIC=m
> # CONFIG_BACKLIGHT_APPLE is not set
> # CONFIG_BACKLIGHT_SAHARA is not set
> # CONFIG_BACKLIGHT_ADP8860 is not set
> # CONFIG_BACKLIGHT_ADP8870 is not set
> # CONFIG_BACKLIGHT_LM3630 is not set
> # CONFIG_BACKLIGHT_LM3639 is not set
> # CONFIG_BACKLIGHT_LP855X is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=m
> CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> # CONFIG_LOGO is not set
> CONFIG_SOUND=y
> CONFIG_SOUND_OSS_CORE=y
> CONFIG_SOUND_OSS_CORE_PRECLAIM=y
> CONFIG_SND=m
> CONFIG_SND_TIMER=m
> CONFIG_SND_PCM=m
> CONFIG_SND_JACK=y
> CONFIG_SND_SEQUENCER=m
> # CONFIG_SND_SEQ_DUMMY is not set
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=m
> CONFIG_SND_PCM_OSS=m
> CONFIG_SND_PCM_OSS_PLUGINS=y
> CONFIG_SND_SEQUENCER_OSS=y
> CONFIG_SND_HRTIMER=m
> CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
> CONFIG_SND_DYNAMIC_MINORS=y
> CONFIG_SND_SUPPORT_OLD_API=y
> CONFIG_SND_VERBOSE_PROCFS=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> CONFIG_SND_VMASTER=y
> CONFIG_SND_KCTL_JACK=y
> CONFIG_SND_DMA_SGBUF=y
> # CONFIG_SND_RAWMIDI_SEQ is not set
> # CONFIG_SND_OPL3_LIB_SEQ is not set
> # CONFIG_SND_OPL4_LIB_SEQ is not set
> # CONFIG_SND_SBAWE_SEQ is not set
> # CONFIG_SND_EMU10K1_SEQ is not set
> CONFIG_SND_DRIVERS=y
> # CONFIG_SND_PCSP is not set
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_ALOOP is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
> CONFIG_SND_PCI=y
> # CONFIG_SND_AD1889 is not set
> # CONFIG_SND_ALS300 is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_ASIHPI is not set
> # CONFIG_SND_ATIIXP is not set
> # CONFIG_SND_ATIIXP_MODEM is not set
> # CONFIG_SND_AU8810 is not set
> # CONFIG_SND_AU8820 is not set
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AW2 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> # CONFIG_SND_CA0106 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_OXYGEN is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS5530 is not set
> # CONFIG_SND_CS5535AUDIO is not set
> # CONFIG_SND_CTXFI is not set
> # CONFIG_SND_DARLA20 is not set
> # CONFIG_SND_GINA20 is not set
> # CONFIG_SND_LAYLA20 is not set
> # CONFIG_SND_DARLA24 is not set
> # CONFIG_SND_GINA24 is not set
> # CONFIG_SND_LAYLA24 is not set
> # CONFIG_SND_MONA is not set
> # CONFIG_SND_MIA is not set
> # CONFIG_SND_ECHO3G is not set
> # CONFIG_SND_INDIGO is not set
> # CONFIG_SND_INDIGOIO is not set
> # CONFIG_SND_INDIGODJ is not set
> # CONFIG_SND_INDIGOIOX is not set
> # CONFIG_SND_INDIGODJX is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_EMU10K1X is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_FM801 is not set
> CONFIG_SND_HDA_INTEL=m
> CONFIG_SND_HDA_PREALLOC_SIZE=64
> # CONFIG_SND_HDA_HWDEP is not set
> # CONFIG_SND_HDA_INPUT_BEEP is not set
> CONFIG_SND_HDA_INPUT_JACK=y
> # CONFIG_SND_HDA_PATCH_LOADER is not set
> CONFIG_SND_HDA_CODEC_REALTEK=y
> CONFIG_SND_HDA_CODEC_ANALOG=y
> CONFIG_SND_HDA_CODEC_SIGMATEL=y
> CONFIG_SND_HDA_CODEC_VIA=y
> CONFIG_SND_HDA_CODEC_HDMI=y
> CONFIG_SND_HDA_CODEC_CIRRUS=y
> CONFIG_SND_HDA_CODEC_CONEXANT=y
> CONFIG_SND_HDA_CODEC_CA0110=y
> CONFIG_SND_HDA_CODEC_CA0132=y
> # CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
> CONFIG_SND_HDA_CODEC_CMEDIA=y
> CONFIG_SND_HDA_CODEC_SI3054=y
> CONFIG_SND_HDA_GENERIC=y
> CONFIG_SND_HDA_POWER_SAVE_DEFAULT=60
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_HDSPM is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_INTEL8X0M is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_LOLA is not set
> # CONFIG_SND_LX6464ES is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_MIXART is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_PCXHR is not set
> # CONFIG_SND_RIPTIDE is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VIA82XX_MODEM is not set
> # CONFIG_SND_VIRTUOSO is not set
> # CONFIG_SND_VX222 is not set
> # CONFIG_SND_YMFPCI is not set
> # CONFIG_SND_USB is not set
> # CONFIG_SND_SOC is not set
> CONFIG_SOUND_PRIME=y
> # CONFIG_SOUND_OSS is not set
>
> #
> # HID support
> #
> CONFIG_HID=y
> # CONFIG_HID_BATTERY_STRENGTH is not set
> CONFIG_HIDRAW=y
> # CONFIG_UHID is not set
> CONFIG_HID_GENERIC=y
>
> #
> # Special HID drivers
> #
> CONFIG_HID_A4TECH=y
> # CONFIG_HID_ACRUX is not set
> CONFIG_HID_APPLE=y
> # CONFIG_HID_APPLEIR is not set
> # CONFIG_HID_AUREAL is not set
> CONFIG_HID_BELKIN=y
> CONFIG_HID_CHERRY=y
> CONFIG_HID_CHICONY=y
> # CONFIG_HID_PRODIKEYS is not set
> CONFIG_HID_CYPRESS=y
> CONFIG_HID_DRAGONRISE=y
> # CONFIG_DRAGONRISE_FF is not set
> # CONFIG_HID_EMS_FF is not set
> # CONFIG_HID_ELECOM is not set
> CONFIG_HID_EZKEY=y
> # CONFIG_HID_HOLTEK is not set
> # CONFIG_HID_KEYTOUCH is not set
> CONFIG_HID_KYE=y
> # CONFIG_HID_UCLOGIC is not set
> # CONFIG_HID_WALTOP is not set
> CONFIG_HID_GYRATION=y
> # CONFIG_HID_ICADE is not set
> CONFIG_HID_TWINHAN=y
> CONFIG_HID_KENSINGTON=y
> # CONFIG_HID_LCPOWER is not set
> # CONFIG_HID_LENOVO_TPKBD is not set
> CONFIG_HID_LOGITECH=y
> CONFIG_HID_LOGITECH_DJ=m
> # CONFIG_LOGITECH_FF is not set
> # CONFIG_LOGIRUMBLEPAD2_FF is not set
> # CONFIG_LOGIG940_FF is not set
> # CONFIG_LOGIWHEELS_FF is not set
> # CONFIG_HID_MAGICMOUSE is not set
> CONFIG_HID_MICROSOFT=y
> CONFIG_HID_MONTEREY=y
> # CONFIG_HID_MULTITOUCH is not set
> CONFIG_HID_NTRIG=y
> CONFIG_HID_ORTEK=y
> CONFIG_HID_PANTHERLORD=y
> # CONFIG_PANTHERLORD_FF is not set
> CONFIG_HID_PETALYNX=y
> # CONFIG_HID_PICOLCD is not set
> # CONFIG_HID_PRIMAX is not set
> # CONFIG_HID_PS3REMOTE is not set
> # CONFIG_HID_ROCCAT is not set
> # CONFIG_HID_SAITEK is not set
> CONFIG_HID_SAMSUNG=y
> CONFIG_HID_SONY=y
> # CONFIG_HID_SPEEDLINK is not set
> # CONFIG_HID_STEELSERIES is not set
> CONFIG_HID_SUNPLUS=y
> CONFIG_HID_GREENASIA=y
> # CONFIG_GREENASIA_FF is not set
> CONFIG_HID_SMARTJOYPLUS=y
> # CONFIG_SMARTJOYPLUS_FF is not set
> # CONFIG_HID_TIVO is not set
> CONFIG_HID_TOPSEED=y
> # CONFIG_HID_THINGM is not set
> CONFIG_HID_THRUSTMASTER=y
> # CONFIG_THRUSTMASTER_FF is not set
> # CONFIG_HID_WACOM is not set
> # CONFIG_HID_WIIMOTE is not set
> CONFIG_HID_ZEROPLUS=y
> # CONFIG_ZEROPLUS_FF is not set
> # CONFIG_HID_ZYDACRON is not set
> # CONFIG_HID_SENSOR_HUB is not set
>
> #
> # USB HID support
> #
> CONFIG_USB_HID=y
> # CONFIG_HID_PID is not set
> CONFIG_USB_HIDDEV=y
>
> #
> # I2C HID support
> #
> # CONFIG_I2C_HID is not set
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB_ARCH_HAS_XHCI=y
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_COMMON=y
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
> CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEFAULT_PERSIST=y
> # CONFIG_USB_DYNAMIC_MINORS is not set
> CONFIG_USB_MON=y
> # CONFIG_USB_WUSB_CBAF is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> # CONFIG_USB_XHCI_HCD is not set
> CONFIG_USB_EHCI_HCD=y
> # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> # CONFIG_USB_EHCI_TT_NEWSCHED is not set
> CONFIG_USB_EHCI_PCI=y
> # CONFIG_USB_EHCI_HCD_PLATFORM is not set
> # CONFIG_USB_OXU210HP_HCD is not set
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_ISP1760_HCD is not set
> # CONFIG_USB_ISP1362_HCD is not set
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_HCD_PLATFORM is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_UHCI_HCD=y
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_R8A66597_HCD is not set
>
> #
> # USB Device Class drivers
> #
> CONFIG_USB_ACM=m
> # CONFIG_USB_PRINTER is not set
> # CONFIG_USB_WDM is not set
> # CONFIG_USB_TMC is not set
>
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> #
>
> #
> # also be needed; see USB_STORAGE Help for more info
> #
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_REALTEK is not set
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_ISD200=y
> CONFIG_USB_STORAGE_USBAT=y
> CONFIG_USB_STORAGE_SDDR09=y
> CONFIG_USB_STORAGE_SDDR55=y
> CONFIG_USB_STORAGE_JUMPSHOT=y
> CONFIG_USB_STORAGE_ALAUDA=y
> # CONFIG_USB_STORAGE_ONETOUCH is not set
> CONFIG_USB_STORAGE_KARMA=y
> # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> # CONFIG_USB_STORAGE_ENE_UB6250 is not set
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> # CONFIG_USB_DWC3 is not set
> # CONFIG_USB_CHIPIDEA is not set
>
> #
> # USB port drivers
> #
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_SEVSEG is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_ISIGHTFW is not set
> # CONFIG_USB_YUREX is not set
> # CONFIG_USB_EZUSB_FX2 is not set
> # CONFIG_USB_HSIC_USB3503 is not set
> # CONFIG_USB_PHY is not set
> # CONFIG_USB_GADGET is not set
> # CONFIG_UWB is not set
> CONFIG_MMC=m
> # CONFIG_MMC_DEBUG is not set
> # CONFIG_MMC_UNSAFE_RESUME is not set
> # CONFIG_MMC_CLKGATE is not set
>
> #
> # MMC/SD/SDIO Card Drivers
> #
> CONFIG_MMC_BLOCK=m
> CONFIG_MMC_BLOCK_MINORS=8
> CONFIG_MMC_BLOCK_BOUNCE=y
> # CONFIG_SDIO_UART is not set
> # CONFIG_MMC_TEST is not set
>
> #
> # MMC/SD/SDIO Host Controller Drivers
> #
> CONFIG_MMC_SDHCI=m
> CONFIG_MMC_SDHCI_PCI=m
> # CONFIG_MMC_RICOH_MMC is not set
> # CONFIG_MMC_SDHCI_ACPI is not set
> CONFIG_MMC_SDHCI_PLTFM=m
> CONFIG_MMC_WBSD=m
> CONFIG_MMC_TIFM_SD=m
> CONFIG_MMC_CB710=m
> # CONFIG_MMC_VIA_SDMMC is not set
> CONFIG_MMC_VUB300=m
> CONFIG_MMC_USHC=m
> # CONFIG_MEMSTICK is not set
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
>
> #
> # LED drivers
> #
> # CONFIG_LEDS_LM3530 is not set
> # CONFIG_LEDS_LM3642 is not set
> # CONFIG_LEDS_PCA9532 is not set
> # CONFIG_LEDS_LP3944 is not set
> # CONFIG_LEDS_LP5521 is not set
> # CONFIG_LEDS_LP5523 is not set
> # CONFIG_LEDS_LP5562 is not set
> # CONFIG_LEDS_CLEVO_MAIL is not set
> # CONFIG_LEDS_PCA955X is not set
> # CONFIG_LEDS_PCA9633 is not set
> # CONFIG_LEDS_BD2802 is not set
> # CONFIG_LEDS_INTEL_SS4200 is not set
> # CONFIG_LEDS_TCA6507 is not set
> # CONFIG_LEDS_LM355x is not set
> # CONFIG_LEDS_OT200 is not set
> # CONFIG_LEDS_BLINKM is not set
>
> #
> # LED Triggers
> #
> CONFIG_LEDS_TRIGGERS=y
> # CONFIG_LEDS_TRIGGER_TIMER is not set
> # CONFIG_LEDS_TRIGGER_ONESHOT is not set
> # CONFIG_LEDS_TRIGGER_IDE_DISK is not set
> # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
> # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
> # CONFIG_LEDS_TRIGGER_CPU is not set
> # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
>
> #
> # iptables trigger is under Netfilter config (LED target)
> #
> # CONFIG_LEDS_TRIGGER_TRANSIENT is not set
> # CONFIG_LEDS_TRIGGER_CAMERA is not set
> # CONFIG_ACCESSIBILITY is not set
> # CONFIG_INFINIBAND is not set
> # CONFIG_EDAC is not set
> CONFIG_RTC_LIB=y
> # CONFIG_RTC_CLASS is not set
> CONFIG_DMADEVICES=y
> # CONFIG_DMADEVICES_DEBUG is not set
>
> #
> # DMA Devices
> #
> # CONFIG_INTEL_MID_DMAC is not set
> # CONFIG_INTEL_IOATDMA is not set
> # CONFIG_DW_DMAC is not set
> # CONFIG_TIMB_DMA is not set
> # CONFIG_PCH_DMA is not set
> CONFIG_DMA_ACPI=y
> # CONFIG_AUXDISPLAY is not set
> # CONFIG_UIO is not set
> # CONFIG_VIRT_DRIVERS is not set
>
> #
> # Virtio drivers
> #
> # CONFIG_VIRTIO_PCI is not set
> # CONFIG_VIRTIO_MMIO is not set
>
> #
> # Microsoft Hyper-V guest support
> #
> # CONFIG_STAGING is not set
> CONFIG_X86_PLATFORM_DEVICES=y
> # CONFIG_ACERHDF is not set
> # CONFIG_ASUS_LAPTOP is not set
> # CONFIG_CHROMEOS_LAPTOP is not set
> CONFIG_DELL_LAPTOP=m
> # CONFIG_FUJITSU_LAPTOP is not set
> # CONFIG_FUJITSU_TABLET is not set
> # CONFIG_HP_ACCEL is not set
> # CONFIG_PANASONIC_LAPTOP is not set
> # CONFIG_THINKPAD_ACPI is not set
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_INTEL_MENLOW is not set
> # CONFIG_ACPI_WMI is not set
> # CONFIG_TOPSTAR_LAPTOP is not set
> # CONFIG_TOSHIBA_BT_RFKILL is not set
> # CONFIG_ACPI_CMPC is not set
> # CONFIG_INTEL_IPS is not set
> # CONFIG_IBM_RTL is not set
> # CONFIG_XO15_EBOOK is not set
> # CONFIG_SAMSUNG_LAPTOP is not set
> # CONFIG_SAMSUNG_Q10 is not set
> # CONFIG_APPLE_GMUX is not set
> # CONFIG_PVPANIC is not set
>
> #
> # Hardware Spinlock drivers
> #
> CONFIG_CLKEVT_I8253=y
> CONFIG_I8253_LOCK=y
> CONFIG_CLKBLD_I8253=y
> # CONFIG_MAILBOX is not set
> CONFIG_IOMMU_SUPPORT=y
> # CONFIG_AMD_IOMMU is not set
> # CONFIG_INTEL_IOMMU is not set
> # CONFIG_IRQ_REMAP is not set
>
> #
> # Remoteproc drivers
> #
> # CONFIG_STE_MODEM_RPROC is not set
>
> #
> # Rpmsg drivers
> #
> # CONFIG_PM_DEVFREQ is not set
> # CONFIG_EXTCON is not set
> # CONFIG_MEMORY is not set
> # CONFIG_IIO is not set
> # CONFIG_NTB is not set
> # CONFIG_VME_BUS is not set
> # CONFIG_PWM is not set
> # CONFIG_IPACK_BUS is not set
> # CONFIG_RESET_CONTROLLER is not set
>
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> CONFIG_FIRMWARE_MEMMAP=y
> # CONFIG_DELL_RBU is not set
> CONFIG_DCDBAS=y
> # CONFIG_DMIID is not set
> # CONFIG_DMI_SYSFS is not set
> # CONFIG_ISCSI_IBFT_FIND is not set
> # CONFIG_GOOGLE_FIRMWARE is not set
>
> #
> # File systems
> #
> CONFIG_DCACHE_WORD_ACCESS=y
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> # CONFIG_EXT2_FS_SECURITY is not set
> # CONFIG_EXT2_FS_XIP is not set
> CONFIG_EXT3_FS=y
> # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> # CONFIG_EXT3_FS_SECURITY is not set
> # CONFIG_EXT4_FS is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> # CONFIG_XFS_FS is not set
> # CONFIG_GFS2_FS is not set
> # CONFIG_BTRFS_FS is not set
> # CONFIG_NILFS2_FS is not set
> CONFIG_FS_POSIX_ACL=y
> CONFIG_FILE_LOCKING=y
> CONFIG_FSNOTIFY=y
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY_USER=y
> # CONFIG_FANOTIFY is not set
> # CONFIG_QUOTA is not set
> # CONFIG_QUOTACTL is not set
> # CONFIG_AUTOFS4_FS is not set
> CONFIG_FUSE_FS=m
> # CONFIG_CUSE is not set
> CONFIG_GENERIC_ACL=y
>
> #
> # Caches
> #
> # CONFIG_FSCACHE is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> CONFIG_UDF_FS=y
> CONFIG_UDF_NLS=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_TMPFS_XATTR=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> # CONFIG_CONFIGFS_FS is not set
> CONFIG_MISC_FILESYSTEMS=y
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_ECRYPT_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_LOGFS is not set
> CONFIG_CRAMFS=m
> # CONFIG_SQUASHFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_OMFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_QNX6FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_PSTORE is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_F2FS_FS is not set
> CONFIG_NETWORK_FILESYSTEMS=y
> CONFIG_NFS_FS=y
> CONFIG_NFS_V2=y
> CONFIG_NFS_V3=y
> # CONFIG_NFS_V3_ACL is not set
> CONFIG_NFS_V4=y
> # CONFIG_NFS_SWAP is not set
> # CONFIG_NFS_V4_1 is not set
> # CONFIG_ROOT_NFS is not set
> # CONFIG_NFS_USE_LEGACY_DNS is not set
> CONFIG_NFS_USE_KERNEL_DNS=y
> # CONFIG_NFSD is not set
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=y
> CONFIG_SUNRPC_GSS=y
> CONFIG_RPCSEC_GSS_KRB5=m
> # CONFIG_SUNRPC_DEBUG is not set
> # CONFIG_CEPH_FS is not set
> CONFIG_CIFS=m
> # CONFIG_CIFS_STATS is not set
> # CONFIG_CIFS_WEAK_PW_HASH is not set
> # CONFIG_CIFS_UPCALL is not set
> # CONFIG_CIFS_XATTR is not set
> CONFIG_CIFS_DEBUG=y
> # CONFIG_CIFS_DEBUG2 is not set
> # CONFIG_CIFS_DFS_UPCALL is not set
> # CONFIG_CIFS_SMB2 is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=y
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_MAC_ROMAN is not set
> # CONFIG_NLS_MAC_CELTIC is not set
> # CONFIG_NLS_MAC_CENTEURO is not set
> # CONFIG_NLS_MAC_CROATIAN is not set
> # CONFIG_NLS_MAC_CYRILLIC is not set
> # CONFIG_NLS_MAC_GAELIC is not set
> # CONFIG_NLS_MAC_GREEK is not set
> # CONFIG_NLS_MAC_ICELAND is not set
> # CONFIG_NLS_MAC_INUIT is not set
> # CONFIG_NLS_MAC_ROMANIAN is not set
> # CONFIG_NLS_MAC_TURKISH is not set
> CONFIG_NLS_UTF8=y
>
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_PRINTK_TIME=y
> CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
> CONFIG_ENABLE_WARN_DEPRECATED=y
> CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_FRAME_WARN=1024
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_STRIP_ASM_SYMS is not set
> # CONFIG_READABLE_ASM is not set
> CONFIG_UNUSED_SYMBOLS=y
> CONFIG_DEBUG_FS=y
> # CONFIG_HEADERS_CHECK is not set
> # CONFIG_DEBUG_SECTION_MISMATCH is not set
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_SHIRQ is not set
> # CONFIG_LOCKUP_DETECTOR is not set
> # CONFIG_PANIC_ON_OOPS is not set
> CONFIG_PANIC_ON_OOPS_VALUE=0
> CONFIG_DETECT_HUNG_TASK=y
> CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
> # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
> CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
> CONFIG_SCHED_DEBUG=y
> CONFIG_SCHEDSTATS=y
> CONFIG_TIMER_STATS=y
> # CONFIG_DEBUG_OBJECTS is not set
> # CONFIG_SLUB_DEBUG_ON is not set
> # CONFIG_SLUB_STATS is not set
> CONFIG_HAVE_DEBUG_KMEMLEAK=y
> # CONFIG_DEBUG_KMEMLEAK is not set
> CONFIG_DEBUG_PREEMPT=y
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_RT_MUTEX_TESTER is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_LOCK_ALLOC is not set
> # CONFIG_PROVE_LOCKING is not set
> # CONFIG_LOCK_STAT is not set
> # CONFIG_DEBUG_ATOMIC_SLEEP is not set
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> CONFIG_STACKTRACE=y
> # CONFIG_DEBUG_STACK_USAGE is not set
> # CONFIG_DEBUG_KOBJECT is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> CONFIG_DEBUG_INFO=y
> # CONFIG_DEBUG_INFO_REDUCED is not set
> CONFIG_DEBUG_VM=y
> # CONFIG_DEBUG_VM_RB is not set
> # CONFIG_DEBUG_VIRTUAL is not set
> # CONFIG_DEBUG_WRITECOUNT is not set
> CONFIG_DEBUG_MEMORY_INIT=y
> CONFIG_DEBUG_LIST=y
> # CONFIG_TEST_LIST_SORT is not set
> # CONFIG_DEBUG_SG is not set
> # CONFIG_DEBUG_NOTIFIERS is not set
> # CONFIG_DEBUG_CREDENTIALS is not set
> CONFIG_ARCH_WANT_FRAME_POINTERS=y
> CONFIG_FRAME_POINTER=y
> # CONFIG_BOOT_PRINTK_DELAY is not set
>
> #
> # RCU Debugging
> #
> # CONFIG_PROVE_RCU_DELAY is not set
> CONFIG_SPARSE_RCU_POINTER=y
> # CONFIG_RCU_TORTURE_TEST is not set
> CONFIG_RCU_CPU_STALL_TIMEOUT=60
> CONFIG_RCU_CPU_STALL_VERBOSE=y
> # CONFIG_RCU_CPU_STALL_INFO is not set
> # CONFIG_RCU_TRACE is not set
> # CONFIG_KPROBES_SANITY_TEST is not set
> # CONFIG_BACKTRACE_SELF_TEST is not set
> # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
> # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
> # CONFIG_DEBUG_PER_CPU_MAPS is not set
> # CONFIG_LKDTM is not set
> # CONFIG_NOTIFIER_ERROR_INJECTION is not set
> # CONFIG_FAULT_INJECTION is not set
> CONFIG_LATENCYTOP=y
> CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
> # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
> CONFIG_DEBUG_PAGEALLOC=y
> CONFIG_WANT_PAGE_DEBUG_FLAGS=y
> CONFIG_PAGE_GUARD=y
> CONFIG_USER_STACKTRACE_SUPPORT=y
> CONFIG_NOP_TRACER=y
> CONFIG_HAVE_FUNCTION_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
> CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> CONFIG_HAVE_FENTRY=y
> CONFIG_HAVE_C_RECORDMCOUNT=y
> CONFIG_TRACE_CLOCK=y
> CONFIG_RING_BUFFER=y
> CONFIG_EVENT_TRACING=y
> CONFIG_CONTEXT_SWITCH_TRACER=y
> CONFIG_RING_BUFFER_ALLOW_SWAP=y
> CONFIG_TRACING=y
> CONFIG_GENERIC_TRACER=y
> CONFIG_TRACING_SUPPORT=y
> CONFIG_FTRACE=y
> CONFIG_FUNCTION_TRACER=y
> CONFIG_FUNCTION_GRAPH_TRACER=y
> # CONFIG_IRQSOFF_TRACER is not set
> # CONFIG_PREEMPT_TRACER is not set
> # CONFIG_SCHED_TRACER is not set
> CONFIG_FTRACE_SYSCALLS=y
> # CONFIG_TRACER_SNAPSHOT is not set
> CONFIG_BRANCH_PROFILE_NONE=y
> # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
> # CONFIG_PROFILE_ALL_BRANCHES is not set
> CONFIG_STACK_TRACER=y
> # CONFIG_BLK_DEV_IO_TRACE is not set
> CONFIG_KPROBE_EVENT=y
> CONFIG_UPROBE_EVENT=y
> CONFIG_PROBE_EVENTS=y
> CONFIG_DYNAMIC_FTRACE=y
> CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
> # CONFIG_FUNCTION_PROFILER is not set
> CONFIG_FTRACE_MCOUNT_RECORD=y
> # CONFIG_FTRACE_STARTUP_TEST is not set
> # CONFIG_MMIOTRACE is not set
> # CONFIG_RING_BUFFER_BENCHMARK is not set
> # CONFIG_RING_BUFFER_STARTUP_TEST is not set
> # CONFIG_RBTREE_TEST is not set
> # CONFIG_INTERVAL_TREE_TEST is not set
> # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
> # CONFIG_DYNAMIC_DEBUG is not set
> # CONFIG_DMA_API_DEBUG is not set
> # CONFIG_ATOMIC64_SELFTEST is not set
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_ARCH_KGDB=y
> CONFIG_KGDB=y
> CONFIG_KGDB_SERIAL_CONSOLE=y
> # CONFIG_KGDB_TESTS is not set
> # CONFIG_KGDB_LOW_LEVEL_TRAP is not set
> # CONFIG_KGDB_KDB is not set
> CONFIG_HAVE_ARCH_KMEMCHECK=y
> # CONFIG_TEST_STRING_HELPERS is not set
> # CONFIG_TEST_KSTRTOX is not set
> CONFIG_STRICT_DEVMEM=y
> CONFIG_X86_VERBOSE_BOOTUP=y
> CONFIG_EARLY_PRINTK=y
> # CONFIG_EARLY_PRINTK_DBGP is not set
> CONFIG_DEBUG_STACKOVERFLOW=y
> # CONFIG_X86_PTDUMP is not set
> CONFIG_DEBUG_RODATA=y
> # CONFIG_DEBUG_RODATA_TEST is not set
> CONFIG_DEBUG_SET_MODULE_RONX=y
> # CONFIG_DEBUG_NX_TEST is not set
> # CONFIG_DEBUG_TLBFLUSH is not set
> # CONFIG_IOMMU_DEBUG is not set
> # CONFIG_IOMMU_STRESS is not set
> CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> # CONFIG_X86_DECODER_SELFTEST is not set
> CONFIG_IO_DELAY_TYPE_0X80=0
> CONFIG_IO_DELAY_TYPE_0XED=1
> CONFIG_IO_DELAY_TYPE_UDELAY=2
> CONFIG_IO_DELAY_TYPE_NONE=3
> CONFIG_IO_DELAY_0X80=y
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> # CONFIG_IO_DELAY_NONE is not set
> CONFIG_DEFAULT_IO_DELAY_TYPE=0
> CONFIG_DEBUG_BOOT_PARAMS=y
> # CONFIG_CPA_DEBUG is not set
> # CONFIG_OPTIMIZE_INLINING is not set
> # CONFIG_DEBUG_NMI_SELFTEST is not set
>
> #
> # Security options
> #
> CONFIG_KEYS=y
> # CONFIG_ENCRYPTED_KEYS is not set
> # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
> # CONFIG_SECURITY_DMESG_RESTRICT is not set
> # CONFIG_SECURITY is not set
> # CONFIG_SECURITYFS is not set
> CONFIG_DEFAULT_SECURITY_DAC=y
> CONFIG_DEFAULT_SECURITY=""
> CONFIG_CRYPTO=y
>
> #
> # Crypto core or helper
> #
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ALGAPI2=y
> CONFIG_CRYPTO_AEAD=m
> CONFIG_CRYPTO_AEAD2=y
> CONFIG_CRYPTO_BLKCIPHER=y
> CONFIG_CRYPTO_BLKCIPHER2=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_HASH2=y
> CONFIG_CRYPTO_RNG=m
> CONFIG_CRYPTO_RNG2=y
> CONFIG_CRYPTO_PCOMP2=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_MANAGER2=y
> # CONFIG_CRYPTO_USER is not set
> CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> CONFIG_CRYPTO_GF128MUL=y
> CONFIG_CRYPTO_NULL=m
> # CONFIG_CRYPTO_PCRYPT is not set
> CONFIG_CRYPTO_WORKQUEUE=y
> CONFIG_CRYPTO_CRYPTD=m
> CONFIG_CRYPTO_AUTHENC=m
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Authenticated Encryption with Associated Data
> #
> CONFIG_CRYPTO_CCM=m
> CONFIG_CRYPTO_GCM=m
> CONFIG_CRYPTO_SEQIV=m
>
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=y
> CONFIG_CRYPTO_CTR=m
> CONFIG_CRYPTO_CTS=m
> CONFIG_CRYPTO_ECB=m
> CONFIG_CRYPTO_LRW=m
> CONFIG_CRYPTO_PCBC=m
> CONFIG_CRYPTO_XTS=m
>
> #
> # Hash modes
> #
> # CONFIG_CRYPTO_CMAC is not set
> CONFIG_CRYPTO_HMAC=m
> CONFIG_CRYPTO_XCBC=m
> # CONFIG_CRYPTO_VMAC is not set
>
> #
> # Digest
> #
> CONFIG_CRYPTO_CRC32C=m
> # CONFIG_CRYPTO_CRC32C_INTEL is not set
> # CONFIG_CRYPTO_CRC32 is not set
> # CONFIG_CRYPTO_CRC32_PCLMUL is not set
> CONFIG_CRYPTO_GHASH=m
> CONFIG_CRYPTO_MD4=m
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_MICHAEL_MIC=m
> # CONFIG_CRYPTO_RMD128 is not set
> # CONFIG_CRYPTO_RMD160 is not set
> # CONFIG_CRYPTO_RMD256 is not set
> # CONFIG_CRYPTO_RMD320 is not set
> CONFIG_CRYPTO_SHA1=y
> # CONFIG_CRYPTO_SHA1_SSSE3 is not set
> # CONFIG_CRYPTO_SHA256_SSSE3 is not set
> # CONFIG_CRYPTO_SHA512_SSSE3 is not set
> CONFIG_CRYPTO_SHA256=m
> CONFIG_CRYPTO_SHA512=m
> CONFIG_CRYPTO_TGR192=m
> CONFIG_CRYPTO_WP512=m
> # CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
>
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=y
> # CONFIG_CRYPTO_AES_X86_64 is not set
> # CONFIG_CRYPTO_AES_NI_INTEL is not set
> CONFIG_CRYPTO_ANUBIS=m
> CONFIG_CRYPTO_ARC4=m
> CONFIG_CRYPTO_BLOWFISH=m
> CONFIG_CRYPTO_BLOWFISH_COMMON=m
> # CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
> # CONFIG_CRYPTO_BLOWFISH_AVX2_X86_64 is not set
> CONFIG_CRYPTO_CAMELLIA=m
> # CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
> # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
> # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
> CONFIG_CRYPTO_CAST_COMMON=m
> CONFIG_CRYPTO_CAST5=m
> # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
> CONFIG_CRYPTO_CAST6=m
> # CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
> CONFIG_CRYPTO_DES=y
> CONFIG_CRYPTO_FCRYPT=m
> CONFIG_CRYPTO_KHAZAD=m
> CONFIG_CRYPTO_SALSA20=m
> # CONFIG_CRYPTO_SALSA20_X86_64 is not set
> CONFIG_CRYPTO_SEED=m
> CONFIG_CRYPTO_SERPENT=m
> # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
> # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
> # CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
> CONFIG_CRYPTO_TEA=m
> CONFIG_CRYPTO_TWOFISH=m
> CONFIG_CRYPTO_TWOFISH_COMMON=m
> # CONFIG_CRYPTO_TWOFISH_X86_64 is not set
> # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
> # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
> # CONFIG_CRYPTO_TWOFISH_AVX2_X86_64 is not set
>
> #
> # Compression
> #
> CONFIG_CRYPTO_DEFLATE=m
> # CONFIG_CRYPTO_ZLIB is not set
> CONFIG_CRYPTO_LZO=m
>
> #
> # Random Number Generation
> #
> # CONFIG_CRYPTO_ANSI_CPRNG is not set
> # CONFIG_CRYPTO_USER_API_HASH is not set
> # CONFIG_CRYPTO_USER_API_SKCIPHER is not set
> # CONFIG_CRYPTO_HW is not set
> # CONFIG_ASYMMETRIC_KEY_TYPE is not set
> CONFIG_HAVE_KVM=y
> CONFIG_HAVE_KVM_IRQCHIP=y
> CONFIG_HAVE_KVM_IRQ_ROUTING=y
> CONFIG_HAVE_KVM_EVENTFD=y
> CONFIG_KVM_APIC_ARCHITECTURE=y
> CONFIG_KVM_MMIO=y
> CONFIG_KVM_ASYNC_PF=y
> CONFIG_HAVE_KVM_MSI=y
> CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
> CONFIG_VIRTUALIZATION=y
> CONFIG_KVM=m
> CONFIG_KVM_INTEL=m
> # CONFIG_KVM_AMD is not set
> # CONFIG_KVM_MMU_AUDIT is not set
> CONFIG_BINARY_PRINTF=y
>
> #
> # Library routines
> #
> CONFIG_BITREVERSE=y
> CONFIG_GENERIC_STRNCPY_FROM_USER=y
> CONFIG_GENERIC_STRNLEN_USER=y
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_GENERIC_PCI_IOMAP=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_GENERIC_IO=y
> CONFIG_PERCPU_RWSEM=y
> CONFIG_CRC_CCITT=m
> # CONFIG_CRC16 is not set
> CONFIG_CRC_T10DIF=y
> CONFIG_CRC_ITU_T=y
> CONFIG_CRC32=y
> # CONFIG_CRC32_SELFTEST is not set
> CONFIG_CRC32_SLICEBY8=y
> # CONFIG_CRC32_SLICEBY4 is not set
> # CONFIG_CRC32_SARWATE is not set
> # CONFIG_CRC32_BIT is not set
> CONFIG_CRC7=m
> CONFIG_LIBCRC32C=m
> # CONFIG_CRC8 is not set
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=m
> CONFIG_LZO_COMPRESS=y
> CONFIG_LZO_DECOMPRESS=y
> CONFIG_XZ_DEC=y
> CONFIG_XZ_DEC_X86=y
> CONFIG_XZ_DEC_POWERPC=y
> CONFIG_XZ_DEC_IA64=y
> CONFIG_XZ_DEC_ARM=y
> CONFIG_XZ_DEC_ARMTHUMB=y
> CONFIG_XZ_DEC_SPARC=y
> CONFIG_XZ_DEC_BCJ=y
> # CONFIG_XZ_DEC_TEST is not set
> CONFIG_DECOMPRESS_GZIP=y
> CONFIG_DECOMPRESS_BZIP2=y
> CONFIG_DECOMPRESS_LZMA=y
> CONFIG_DECOMPRESS_XZ=y
> CONFIG_DECOMPRESS_LZO=y
> CONFIG_TEXTSEARCH=y
> CONFIG_TEXTSEARCH_KMP=m
> CONFIG_TEXTSEARCH_BM=m
> CONFIG_TEXTSEARCH_FSM=m
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> CONFIG_CHECK_SIGNATURE=y
> CONFIG_CPU_RMAP=y
> CONFIG_DQL=y
> CONFIG_NLATTR=y
> CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
> CONFIG_AVERAGE=y
> # CONFIG_CORDIC is not set
> # CONFIG_DDR is not set
> CONFIG_OID_REGISTRY=y
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.10.0-rc1-fullnohzdisabled (root@tiehlicka) (gcc version 4.7.3 (Debian 4.7.3-4) ) #149 SMP PREEMPT Mon May 13 13:26:26 CEST 2013
> [ 0.000000] Command line: root=UUID=ca09430c-6e28-44af-a30e-79fe3c80e9f9 ro craskernel=256M@16M resume=/dev/sda8 netconsole=@10.100.13.132/eth0,@10.100.13.54/00:19:D1:E4:E8:5A no_console_suspend loglevel=7
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a7ff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009a800-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000caa28fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000caa29000-0x00000000caa6cfff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000caa6d000-0x00000000cadb6fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000cadb7000-0x00000000cade6fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000cade7000-0x00000000cafe6fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000cafe7000-0x00000000caffefff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012dffffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.6 present.
> [ 0.000000] DMI: Dell Inc. Latitude E6320/09PHH9, BIOS A08 10/18/2011
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x12e000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask F80000000 write-back
> [ 0.000000] 1 base 080000000 mask FC0000000 write-back
> [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
> [ 0.000000] 3 base 0C8000000 mask FFC000000 write-back
> [ 0.000000] 4 base 0CB000000 mask FFF000000 uncachable
> [ 0.000000] 5 base 100000000 mask FE0000000 write-back
> [ 0.000000] 6 base 120000000 mask FF0000000 write-back
> [ 0.000000] 7 base 12E000000 mask FFE000000 uncachable
> [ 0.000000] 8 disabled
> [ 0.000000] 9 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
> [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000f1ad0-0x000f1adf] mapped at [ffff8800000f1ad0]
> [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
> [ 0.000000] reserving inaccessible SNB gfx pages
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01c99000, 0x01c99fff] PGTABLE
> [ 0.000000] BRK [0x01c9a000, 0x01c9afff] PGTABLE
> [ 0.000000] BRK [0x01c9b000, 0x01c9bfff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x12de00000-0x12dffffff]
> [ 0.000000] [mem 0x12de00000-0x12dffffff] page 4k
> [ 0.000000] BRK [0x01c9c000, 0x01c9cfff] PGTABLE
> [ 0.000000] BRK [0x01c9d000, 0x01c9dfff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12ddfffff]
> [ 0.000000] [mem 0x12c000000-0x12ddfffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
> [ 0.000000] [mem 0x100000000-0x12bffffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
> [ 0.000000] [mem 0x00100000-0x1fffffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
> [ 0.000000] [mem 0x20200000-0x3fffffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x40200000-0xcaa28fff]
> [ 0.000000] [mem 0x40200000-0xcaa28fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xcaa6d000-0xcadb6fff]
> [ 0.000000] [mem 0xcaa6d000-0xcadb6fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
> [ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
> [ 0.000000] RAMDISK: [mem 0x1fd69000-0x1ffeffff]
> [ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
> [ 0.000000] ACPI: XSDT 00000000caffde18 00074 (v01 DELL CBX3 06222004 MSFT 00010013)
> [ 0.000000] ACPI: FACP 00000000caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
> [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130328/tbfadt-395)
> [ 0.000000] ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40, using 32 (20130328/tbfadt-522)
> [ 0.000000] ACPI: DSDT 00000000caf66018 08461 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
> [ 0.000000] ACPI: FACS 00000000cafe4e40 00040
> [ 0.000000] ACPI: APIC 00000000caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013)
> [ 0.000000] ACPI: TCPA 00000000cafe5d18 00032 (v02 00000000 00000000)
> [ 0.000000] ACPI: SSDT 00000000caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
> [ 0.000000] ACPI: MCFG 00000000cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
> [ 0.000000] ACPI: HPET 00000000cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
> [ 0.000000] ACPI: BOOT 00000000cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013)
> [ 0.000000] ACPI: SSDT 00000000caf7d018 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
> [ 0.000000] ACPI: SSDT 00000000caf7c018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903)
> [ 0.000000] ACPI: SLIC 00000000caf86c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880129000000-ffff88012cffffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x12dffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x00099fff]
> [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
> [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
> [ 0.000000] node 0: [mem 0x40200000-0xcaa28fff]
> [ 0.000000] node 0: [mem 0xcaa6d000-0xcadb6fff]
> [ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
> [ 0.000000] node 0: [mem 0x100000000-0x12dffffff]
> [ 0.000000] On node 0 totalpages: 1018125
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 153 pages reserved
> [ 0.000000] DMA zone: 3993 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 12902 pages used for memmap
> [ 0.000000] DMA32 zone: 825716 pages, LIFO batch:31
> [ 0.000000] Normal zone: 2944 pages used for memmap
> [ 0.000000] Normal zone: 188416 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [ 0.000000] smpboot: 16 Processors exceeds NR_CPUS limit of 8
> [ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
> [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
> [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
> [ 0.000000] PM: Registered nosave memory: 00000000caa29000 - 00000000caa6d000
> [ 0.000000] PM: Registered nosave memory: 00000000cadb7000 - 00000000cade7000
> [ 0.000000] PM: Registered nosave memory: 00000000cade7000 - 00000000cafe7000
> [ 0.000000] PM: Registered nosave memory: 00000000cafe7000 - 00000000cafff000
> [ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000fed1c000
> [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
> [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000
> [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
> [ 0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
> [ 0.000000] e820: [mem 0xcb000000-0xfed1bfff] available for PCI devices
> [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012d400000 s80128 r8192 d22272 u262144
> [ 0.000000] pcpu-alloc: s80128 r8192 d22272 u262144 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1002062
> [ 0.000000] Kernel command line: root=UUID=ca09430c-6e28-44af-a30e-79fe3c80e9f9 ro craskernel=256M@16M resume=/dev/sda8 netconsole=@10.100.13.132/eth0,@10.100.13.54/00:19:D1:E4:E8:5A no_console_suspend loglevel=7
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Memory: 3909568k/4947968k available (4656k kernel code, 875468k absent, 162932k reserved, 6235k data, 1004k init)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> [ 0.000000] Preemptible hierarchical RCU implementation.
> [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
> [ 0.000000] Experimental no-CBs for all CPUs
> [ 0.000000] Experimental no-CBs CPUs: 0-7.
> [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] allocated 16777216 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.004000] tsc: Detected 2593.891 MHz processor
> [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.78 BogoMIPS (lpj=10375564)
> [ 0.000191] pid_max: default: 32768 minimum: 301
> [ 0.000341] Mount-cache hash table entries: 256
> [ 0.000626] Initializing cgroup subsys memory
> [ 0.000749] CPU: Physical Processor ID: 0
> [ 0.000852] CPU: Processor Core ID: 0
> [ 0.000947] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [ 0.000947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
> [ 0.001104] mce: CPU supports 7 MCE banks
> [ 0.001205] CPU0: Thermal monitoring enabled (TM1)
> [ 0.001305] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
> [ 0.001305] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
> [ 0.001305] tlb_flushall_shift: 5
> [ 0.001598] debug: unmapping init [mem 0xffffffff81b9f000-0xffffffff81ba3fff]
> [ 0.001707] ACPI: Core revision 20130328
> [ 0.009580] ACPI: All ACPI Tables successfully acquired
> [ 0.010544] ftrace: allocating 21903 entries in 86 pages
> [ 0.021836] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.061642] smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz (fam: 06, model: 2a, stepping: 07)
> [ 0.061911] TSC deadline timer enabled
> [ 0.061921] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
> [ 0.062225] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
> [ 0.062373] ... version: 3
> [ 0.062466] ... bit width: 48
> [ 0.062560] ... generic registers: 8
> [ 0.062652] ... value mask: 0000ffffffffffff
> [ 0.062747] ... max period: 000000007fffffff
> [ 0.062842] ... fixed-purpose events: 3
> [ 0.062935] ... event mask: 00000007000000ff
> [ 0.086065] smpboot: Booting Node 0, Processors #1
> [ 0.099316] Brought up 2 CPUs
> [ 0.099496] smpboot: Total of 2 processors activated (10375.56 BogoMIPS)
> [ 0.101767] PM: Registering ACPI NVS region [mem 0xcade7000-0xcafe6fff] (2097152 bytes)
> [ 0.101991] reboot: PCI series board detected. Selecting Dell Latitude E6320-method for reboots.
> [ 0.103132] NET: Registered protocol family 16
> [ 0.103560] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [ 0.103707] ACPI: bus type PCI registered
> [ 0.103818] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> [ 0.103968] PCI: not using MMCONFIG
> [ 0.104061] PCI: Using configuration type 1 for base access
> [ 0.104163] dmi type 0xB1 record - unknown flag
> [ 0.109188] bio: create slab <bio-0> at 0
> [ 0.109390] ACPI: Added _OSI(Module Device)
> [ 0.109485] ACPI: Added _OSI(Processor Device)
> [ 0.109579] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.109674] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.111161] ACPI: EC: Look up EC in DSDT
> [ 0.116748] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 0.220039] ACPI: SSDT 00000000cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
> [ 0.220651] ACPI: Dynamic OEM Table Load:
> [ 0.220821] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
> [ 0.227929] ACPI: SSDT 00000000cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
> [ 0.228598] ACPI: Dynamic OEM Table Load:
> [ 0.228768] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
> [ 0.235647] ACPI: SSDT 00000000cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
> [ 0.236233] ACPI: Dynamic OEM Table Load:
> [ 0.236403] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
> [ 0.291751] ACPI: Interpreter enabled
> [ 0.291850] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
> [ 0.292078] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
> [ 0.292317] ACPI: (supports S0 S3 S4 S5)
> [ 0.292411] ACPI: Using IOAPIC for interrupt routing
> [ 0.292529] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> [ 0.293224] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
> [ 0.296656] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 1.030226] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
> [ 1.030381] \_SB_.PCI0:_OSC invalid UUID
> [ 1.030382] _OSC request data:1 8 0
> [ 1.031402] PCI host bridge to bus 0000:00
> [ 1.031498] pci_bus 0000:00: root bus resource [bus 00-3e]
> [ 1.031594] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 1.031691] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 1.031788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [ 1.031887] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
> [ 1.031985] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
> [ 1.032090] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
> [ 1.032211] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
> [ 1.032222] pci 0000:00:02.0: reg 10: [mem 0xe1400000-0xe17fffff 64bit]
> [ 1.032228] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 1.032233] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
> [ 1.032367] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
> [ 1.032392] pci 0000:00:16.0: reg 10: [mem 0xe2eb0000-0xe2eb000f 64bit]
> [ 1.032469] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> [ 1.032580] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
> [ 1.032600] pci 0000:00:16.3: reg 10: [io 0x40e0-0x40e7]
> [ 1.032610] pci 0000:00:16.3: reg 14: [mem 0xe2e90000-0xe2e90fff]
> [ 1.032795] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
> [ 1.032815] pci 0000:00:19.0: reg 10: [mem 0xe2e00000-0xe2e1ffff]
> [ 1.032824] pci 0000:00:19.0: reg 14: [mem 0xe2e80000-0xe2e80fff]
> [ 1.032833] pci 0000:00:19.0: reg 18: [io 0x4080-0x409f]
> [ 1.032896] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> [ 1.052859] pci 0000:00:19.0: System wakeup disabled by ACPI
> [ 1.053022] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
> [ 1.053047] pci 0000:00:1a.0: reg 10: [mem 0xe2e70000-0xe2e703ff]
> [ 1.053139] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [ 1.053203] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 1.053364] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
> [ 1.053382] pci 0000:00:1b.0: reg 10: [mem 0xe2e60000-0xe2e63fff 64bit]
> [ 1.053451] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 1.053478] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [ 1.053630] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
> [ 1.053761] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 1.053803] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 1.053952] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
> [ 1.054082] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 1.054129] pci 0000:00:1c.1: System wakeup disabled by ACPI
> [ 1.054279] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
> [ 1.054409] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 1.054470] pci 0000:00:1c.2: System wakeup disabled by ACPI
> [ 1.054623] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
> [ 1.054753] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> [ 1.054797] pci 0000:00:1c.3: System wakeup disabled by ACPI
> [ 1.054948] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
> [ 1.055080] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> [ 1.055128] pci 0000:00:1c.5: System wakeup disabled by ACPI
> [ 1.055281] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
> [ 1.055304] pci 0000:00:1d.0: reg 10: [mem 0xe2e50000-0xe2e503ff]
> [ 1.055394] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 1.055458] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 1.055608] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
> [ 1.055779] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
> [ 1.055799] pci 0000:00:1f.2: reg 10: [io 0x40d0-0x40d7]
> [ 1.055807] pci 0000:00:1f.2: reg 14: [io 0x40c0-0x40c3]
> [ 1.055816] pci 0000:00:1f.2: reg 18: [io 0x40b0-0x40b7]
> [ 1.055824] pci 0000:00:1f.2: reg 1c: [io 0x40a0-0x40a3]
> [ 1.055832] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
> [ 1.055841] pci 0000:00:1f.2: reg 24: [mem 0xe2e40000-0xe2e407ff]
> [ 1.055886] pci 0000:00:1f.2: PME# supported from D3hot
> [ 1.055982] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
> [ 1.055999] pci 0000:00:1f.3: reg 10: [mem 0xe2e30000-0xe2e300ff 64bit]
> [ 1.056020] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
> [ 1.056228] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 1.056598] pci 0000:02:00.0: [8086:422b] type 00 class 0x028000
> [ 1.056767] pci 0000:02:00.0: reg 10: [mem 0xe2d00000-0xe2d01fff 64bit]
> [ 1.057470] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [ 1.057595] pci 0000:02:00.0: System wakeup disabled by ACPI
> [ 1.057732] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 1.057835] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff]
> [ 1.057944] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
> [ 1.058044] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
> [ 1.058050] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff]
> [ 1.058058] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
> [ 1.058159] pci 0000:00:1c.3: PCI bridge to [bus 09]
> [ 1.058258] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
> [ 1.058264] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff]
> [ 1.058273] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
> [ 1.060120] pci 0000:0a:00.0: [1217:8221] type 00 class 0x080501
> [ 1.060165] pci 0000:0a:00.0: reg 10: [mem 0xe2c00000-0xe2c001ff]
> [ 1.060488] pci 0000:0a:00.0: supports D1 D2
> [ 1.060490] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 1.060546] pci 0000:0a:00.0: System wakeup disabled by ACPI
> [ 1.060681] pci 0000:00:1c.5: PCI bridge to [bus 0a]
> [ 1.060786] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff]
> [ 1.060827] pci_bus 0000:00: on NUMA node 0
> [ 1.060892] \_SB_.PCI0:_OSC invalid UUID
> [ 1.060893] _OSC request data:1 19 0
> [ 1.060897] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
> [ 1.061046] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
> [ 1.125207] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> [ 1.125924] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> [ 1.126641] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> [ 1.127358] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> [ 1.128073] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
> [ 1.128702] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> [ 1.129465] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
> [ 1.130095] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> [ 1.209725] ACPI: Enabled 2 GPEs in block 00 to 3F
> [ 1.209903] acpi root: \_SB_.PCI0 notify handler is installed
> [ 1.209958] Found 1 acpi root devices
> [ 1.210041] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
> [ 1.273264] ACPI: No dock devices found.
> [ 1.273455] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 1.273606] vgaarb: loaded
> [ 1.273697] vgaarb: bridge control possible 0000:00:02.0
> [ 1.273924] SCSI subsystem initialized
> [ 1.274018] ACPI: bus type ATA registered
> [ 1.274208] libata version 3.00 loaded.
> [ 1.274214] ACPI: bus type USB registered
> [ 1.274366] usbcore: registered new interface driver usbfs
> [ 1.274490] usbcore: registered new interface driver hub
> [ 1.274625] usbcore: registered new device driver usb
> [ 1.274794] pps_core: LinuxPPS API ver. 1 registered
> [ 1.274890] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [ 1.275060] PTP clock support registered
> [ 1.275221] PCI: Using ACPI for IRQ routing
> [ 1.276922] PCI: pci_cache_line_size set to 64 bytes
> [ 1.278740] e820: reserve RAM buffer [mem 0x0009a800-0x0009ffff]
> [ 1.278742] e820: reserve RAM buffer [mem 0xcaa29000-0xcbffffff]
> [ 1.278744] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
> [ 1.278746] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
> [ 1.278747] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
> [ 1.278990] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [ 1.279433] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> [ 1.281540] Switching to clocksource hpet
> [ 1.286249] pnp: PnP ACPI init
> [ 1.286351] ACPI: bus type PNP registered
> [ 1.286488] pnp 00:00: [dma 4]
> [ 1.286540] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 1.286595] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
> [ 1.286772] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
> [ 1.286871] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
> [ 1.286935] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 1.287010] system 00:04: [io 0x0680-0x069f] has been reserved
> [ 1.287108] system 00:04: [io 0x1000-0x100f] has been reserved
> [ 1.287205] system 00:04: [io 0xffff] has been reserved
> [ 1.287301] system 00:04: [io 0xffff] has been reserved
> [ 1.287397] system 00:04: [io 0x0400-0x047f] has been reserved
> [ 1.287496] system 00:04: [io 0x0500-0x057f] has been reserved
> [ 1.287593] system 00:04: [io 0x164e-0x164f] has been reserved
> [ 1.287691] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.287747] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 1.287808] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
> [ 1.393929] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled)
> [ 1.393995] pnp 00:08: Plug and Play ACPI device, IDs DLL0492 PNP0f13 (active)
> [ 1.394090] pnp 00:09: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)
> [ 1.394349] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 1.394449] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
> [ 1.394546] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 1.394644] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 1.394743] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
> [ 1.394841] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 1.394939] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
> [ 1.395038] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
> [ 1.395136] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
> [ 1.395235] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
> [ 1.395334] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.453968] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
> [ 1.610455] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
> [ 1.610556] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
> [ 1.610656] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 1.610667] pnp: PnP ACPI: found 13 devices
> [ 1.610760] ACPI: bus type PNP unregistered
> [ 1.618437] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 1.618550] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 1.618650] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff]
> [ 1.618759] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
> [ 1.618856] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
> [ 1.618958] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff]
> [ 1.619060] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
> [ 1.619215] pci 0000:00:1c.3: PCI bridge to [bus 09]
> [ 1.619311] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
> [ 1.619413] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff]
> [ 1.619515] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
> [ 1.619668] pci 0000:00:1c.5: PCI bridge to [bus 0a]
> [ 1.619769] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff]
> [ 1.620392] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 1.620394] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 1.620396] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 1.620398] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
> [ 1.620400] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
> [ 1.620402] pci_bus 0000:02: resource 1 [mem 0xe2d00000-0xe2dfffff]
> [ 1.620404] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
> [ 1.620406] pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe2bfffff]
> [ 1.620408] pci_bus 0000:03: resource 2 [mem 0xe0a00000-0xe13fffff 64bit pref]
> [ 1.620410] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
> [ 1.620412] pci_bus 0000:09: resource 1 [mem 0xe1800000-0xe21fffff]
> [ 1.620414] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
> [ 1.620416] pci_bus 0000:0a: resource 1 [mem 0xe2c00000-0xe2cfffff]
> [ 1.620451] NET: Registered protocol family 2
> [ 1.620687] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
> [ 1.620934] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
> [ 1.621120] TCP: Hash tables configured (established 32768 bind 32768)
> [ 1.621237] TCP: reno registered
> [ 1.621333] UDP hash table entries: 2048 (order: 4, 65536 bytes)
> [ 1.621443] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
> [ 1.621595] NET: Registered protocol family 1
> [ 1.621781] RPC: Registered named UNIX socket transport module.
> [ 1.621891] RPC: Registered udp transport module.
> [ 1.621985] RPC: Registered tcp transport module.
> [ 1.622079] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 1.622183] pci 0000:00:02.0: Boot video device
> [ 1.624383] PCI: CLS 64 bytes, default 64
> [ 1.624419] Trying to unpack rootfs image as initramfs...
> [ 1.667619] debug: unmapping init [mem 0xffff88001fd69000-0xffff88001ffeffff]
> [ 1.667777] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 1.667876] software IO TLB [mem 0xc6a29000-0xcaa29000] (64MB) mapped at [ffff8800c6a29000-ffff8800caa28fff]
> [ 1.668104] Simple Boot Flag at 0xf3 set to 0x1
> [ 1.668628] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
> [ 1.668727] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
> [ 1.668865] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 1.694349] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.698281] NFS: Registering the id_resolver key type
> [ 1.698384] Key type id_resolver registered
> [ 1.698479] Key type id_legacy registered
> [ 1.698633] msgmni has been set to 7635
> [ 1.700338] io scheduler noop registered
> [ 1.700433] io scheduler deadline registered
> [ 1.700582] io scheduler cfq registered (default)
> [ 1.701725] ACPI: AC Adapter [AC] (on-line)
> [ 1.702335] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> [ 1.703163] ACPI: Lid Switch [LID]
> [ 1.703318] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> [ 1.703467] ACPI: Power Button [PBTN]
> [ 1.703622] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
> [ 1.703771] ACPI: Sleep Button [SBTN]
> [ 1.703924] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> [ 1.704071] ACPI: Power Button [PWRF]
> [ 1.704298] ACPI: Requesting acpi_cpufreq
> [ 1.704935] Monitor-Mwait will be used to enter C-1 state
> [ 1.704941] Monitor-Mwait will be used to enter C-2 state
> [ 1.704945] Monitor-Mwait will be used to enter C-3 state
> [ 1.704955] ACPI: acpi_idle registered with cpuidle
> [ 2.106292] thermal LNXTHERM:00: registered as thermal_zone0
> [ 2.106390] ACPI: Thermal Zone [THM] (25 C)
> [ 2.121802] ACPI: Battery Slot [BAT0] (battery present)
> [ 2.135935] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [ 2.206811] 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A
> [ 2.222595] Linux agpgart interface v0.103
> [ 2.224494] brd: module loaded
> [ 2.225471] loop: module loaded
> [ 2.225565] Uniform Multi-Platform E-IDE driver
> [ 2.225778] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> [ 2.225936] Probing IDE interface ide0...
> [ 2.306844] ACPI: Battery Slot [BAT1] (battery absent)
> [ 2.378875] ACPI: Battery Slot [BAT2] (battery absent)
> [ 2.666574] tsc: Refined TSC clocksource calibration: 2594.107 MHz
> [ 2.666693] Switching to clocksource tsc
> [ 2.786741] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 2.786887] Probing IDE interface ide1...
> [ 3.347100] ide1 at 0x170-0x177,0x376 on irq 15
> [ 3.347238] ide-gd driver 1.18
> [ 3.347356] ide-cd driver 5.00
> [ 3.347648] ahci 0000:00:1f.2: version 3.0
> [ 3.347792] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
> [ 3.347824] ahci: SSS flag set, parallel bus scan disabled
> [ 3.363060] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
> [ 3.363223] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
> [ 3.363376] ahci 0000:00:1f.2: setting latency timer to 64
> [ 3.395752] scsi0 : ahci
> [ 3.395950] scsi1 : ahci
> [ 3.396131] scsi2 : ahci
> [ 3.396310] scsi3 : ahci
> [ 3.396489] scsi4 : ahci
> [ 3.396667] scsi5 : ahci
> [ 3.396831] ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 40
> [ 3.396980] ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 40
> [ 3.397126] ata3: DUMMY
> [ 3.397218] ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 40
> [ 3.397364] ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 40
> [ 3.397512] ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 40
> [ 3.397808] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> [ 3.397905] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
> [ 3.398134] e1000e 0000:00:19.0: setting latency timer to 64
> [ 3.398187] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
> [ 3.398353] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
> [ 3.595196] e1000e 0000:00:19.0 eth0: registered PHC clock
> [ 3.595293] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:4e:b6:e1
> [ 3.595441] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
> [ 3.595586] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 2041FF-0FF
> [ 3.595716] sky2: driver version 1.30
> [ 3.595914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 3.596012] ehci-pci: EHCI PCI platform driver
> [ 3.596228] ehci-pci 0000:00:1a.0: setting latency timer to 64
> [ 3.596237] ehci-pci 0000:00:1a.0: EHCI Host Controller
> [ 3.596373] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
> [ 3.596531] ehci-pci 0000:00:1a.0: debug port 2
> [ 3.600523] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> [ 3.600539] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe2e70000
> [ 3.611193] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 3.611337] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 3.611436] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 3.611582] usb usb1: Product: EHCI Host Controller
> [ 3.611677] usb usb1: Manufacturer: Linux 3.10.0-rc1-fullnohzdisabled ehci_hcd
> [ 3.611823] usb usb1: SerialNumber: 0000:00:1a.0
> [ 3.612030] hub 1-0:1.0: USB hub found
> [ 3.612127] hub 1-0:1.0: 3 ports detected
> [ 3.612400] ehci-pci 0000:00:1d.0: setting latency timer to 64
> [ 3.612406] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 3.612549] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
> [ 3.612707] ehci-pci 0000:00:1d.0: debug port 2
> [ 3.616708] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 3.616722] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe2e50000
> [ 3.627202] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 3.627342] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 3.627440] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 3.627588] usb usb2: Product: EHCI Host Controller
> [ 3.627683] usb usb2: Manufacturer: Linux 3.10.0-rc1-fullnohzdisabled ehci_hcd
> [ 3.627829] usb usb2: SerialNumber: 0000:00:1d.0
> [ 3.628026] hub 2-0:1.0: USB hub found
> [ 3.628122] hub 2-0:1.0: 3 ports detected
> [ 3.628307] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 3.628435] uhci_hcd: USB Universal Host Controller Interface driver
> [ 3.628604] usbcore: registered new interface driver usb-storage
> [ 3.628725] usbcore: registered new interface driver ums-alauda
> [ 3.628848] usbcore: registered new interface driver ums-datafab
> [ 3.628976] usbcore: registered new interface driver ums-freecom
> [ 3.629099] usbcore: registered new interface driver ums-isd200
> [ 3.629221] usbcore: registered new interface driver ums-jumpshot
> [ 3.629345] usbcore: registered new interface driver ums-karma
> [ 3.629467] usbcore: registered new interface driver ums-sddr09
> [ 3.629589] usbcore: registered new interface driver ums-sddr55
> [ 3.629711] usbcore: registered new interface driver ums-usbat
> [ 3.629890] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> [ 3.630431] i8042: Warning: Keylock active
> [ 3.631764] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 3.631861] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 3.632049] mousedev: PS/2 mouse device common for all mice
> [ 3.632404] cpuidle: using governor ladder
> [ 3.632544] cpuidle: using governor menu
> [ 3.632711] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> [ 3.632921] hidraw: raw HID events driver (C) Jiri Kosina
> [ 3.633237] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
> [ 3.633975] usbcore: registered new interface driver usbhid
> [ 3.634071] usbhid: USB HID core driver
> [ 3.634165] oprofile: using NMI interrupt.
> [ 3.634369] TCP: cubic registered
> [ 3.634650] NET: Registered protocol family 10
> [ 3.634950] sit: IPv6 over IPv4 tunneling driver
> [ 3.635220] NET: Registered protocol family 17
> [ 3.635333] Bridge firewalling registered
> [ 3.635443] Key type dns_resolver registered
> [ 3.635859] PM: Checking hibernation image partition /dev/sda8
> [ 3.715350] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 3.815784] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [ 3.816586] ata1.00: ATA-9: INTEL SSDSC2CT180A3, 300i, max UDMA/133
> [ 3.816702] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> [ 3.891851] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [ 3.892659] ata1.00: configured for UDMA/133
> [ 3.899698] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CT18 300i PQ: 0 ANSI: 5
> [ 3.900389] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
> [ 3.900453] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 3.901017] sd 0:0:0:0: [sda] Write Protect is off
> [ 3.901131] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 3.901199] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 3.902569] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
> [ 3.903275] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 3.923482] usb 1-1: new high-speed USB device number 2 using ehci-pci
> [ 4.056196] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
> [ 4.056306] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 4.056993] hub 1-1:1.0: USB hub found
> [ 4.057312] hub 1-1:1.0: 6 ports detected
> [ 4.167646] usb 2-1: new high-speed USB device number 2 using ehci-pci
> [ 4.219672] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 4.223214] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A4SH, QD12, max UDMA/100
> [ 4.229433] ata2.00: configured for UDMA/100
> [ 4.237021] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A4SH QD12 PQ: 0 ANSI: 5
> [ 4.246399] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 4.246550] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 4.246988] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 4.247131] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 4.300085] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
> [ 4.300197] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 4.300931] hub 2-1:1.0: USB hub found
> [ 4.301202] hub 2-1:1.0: 8 ports detected
> [ 4.371893] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
> [ 4.469007] usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187
> [ 4.469128] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 4.469271] usb 1-1.4: Product: DW375 Bluetooth Module
> [ 4.469363] usb 1-1.4: Manufacturer: Dell Computer Corp
> [ 4.469457] usb 1-1.4: SerialNumber: 446D57C904C4
> [ 4.540007] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
> [ 4.563885] ata4: SATA link down (SStatus 0 SControl 300)
> [ 4.682036] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=6433
> [ 4.682139] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
> [ 4.682284] usb 1-1.5: Product: Laptop_Integrated_Webcam_HD
> [ 4.682377] usb 1-1.5: Manufacturer: CN018T967248725OB3W9A01
> [ 4.760066] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
> [ 4.858757] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c050
> [ 4.858857] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 4.859004] usb 2-1.3: Product: USB-PS/2 Optical Mouse
> [ 4.859096] usb 2-1.3: Manufacturer: Logitech
> [ 4.863980] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
> [ 4.864330] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3/input0
> [ 4.884108] ata5: SATA link down (SStatus 0 SControl 300)
> [ 4.936259] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
> [ 5.014611] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6
> [ 5.027851] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
> [ 5.051361] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5801
> [ 5.051461] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 5.051607] usb 2-1.8: Product: 5880
> [ 5.051697] usb 2-1.8: Manufacturer: Broadcom Corp
> [ 5.051789] usb 2-1.8: SerialNumber: 0123456789ABCD
> [ 5.052073] usb 2-1.8: config 0 descriptor??
> [ 5.204318] ata6: SATA link down (SStatus 0 SControl 300)
> [ 5.204506] PM: Hibernation image partition 8:8 present
> [ 5.204508] PM: Looking for hibernation image.
> [ 5.205878] PM: Image not found (code -22)
> [ 5.205881] PM: Hibernation image not present or could not be loaded.
> [ 5.205903] registered taskstats version 1
> [ 5.208227] netpoll: netconsole: local port 6665
> [ 5.208323] netpoll: netconsole: local IPv4 address 10.100.13.132
> [ 5.208420] netpoll: netconsole: interface 'eth0'
> [ 5.208513] netpoll: netconsole: remote port 6666
> [ 5.208609] netpoll: netconsole: remote IPv4 address 10.100.13.54
> [ 5.208706] netpoll: netconsole: remote ethernet address 00:19:d1:e4:e8:5a
> [ 5.208805] netpoll: netconsole: device eth0 not up yet, forcing it
> [ 5.342403] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
> [ 5.444508] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
> [ 5.444661] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 8.355414] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
> [ 8.355598] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 8.360342] console [netcon0] enabled
> [ 8.360443] netconsole: network logging started
> [ 8.361094] debug: unmapping init [mem 0xffffffff81aa4000-0xffffffff81b9efff]
> [ 8.361227] Write protecting the kernel read-only data: 10240k
> [ 8.361486] debug: unmapping init [mem 0xffff88000148f000-0xffff8800015fffff]
> [ 8.361645] debug: unmapping init [mem 0xffff880001831000-0xffff8800019fffff]
> [ 8.595407] PM: Starting manual resume from disk
> [ 8.595554] PM: Hibernation image partition 8:8 present
> [ 8.595555] PM: Looking for hibernation image.
> [ 8.595763] PM: Image not found (code -22)
> [ 8.595765] PM: Hibernation image not present or could not be loaded.
> [ 8.598685] PM: Marking nosave pages: [mem 0x0009a000-0x000fffff]
> [ 8.598689] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
> [ 8.598696] PM: Marking nosave pages: [mem 0x40000000-0x401fffff]
> [ 8.598702] PM: Marking nosave pages: [mem 0xcaa29000-0xcaa6cfff]
> [ 8.598704] PM: Marking nosave pages: [mem 0xcadb7000-0xcaffefff]
> [ 8.598711] PM: Marking nosave pages: [mem 0xcb000000-0xffffffff]
> [ 8.599307] PM: Basic memory bitmaps created
> [ 8.613950] PM: Basic memory bitmaps freed
> [ 8.776563] udevd[1754]: starting version 175
> [ 8.881628] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
> [ 8.881877] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 8.889565] sdhci: Secure Digital Host Controller Interface driver
> [ 8.889665] sdhci: Copyright(c) Pierre Ossman
> [ 8.890381] sdhci-pci 0000:0a:00.0: SDHCI controller found [1217:8221] (rev 5)
> [ 8.892493] mmc0: SDHCI controller on PCI [0000:0a:00.0] using DMA
> [ 8.906348] cfg80211: Calling CRDA to update world regulatory domain
> [ 8.913314] Intel(R) Wireless WiFi driver for Linux, in-tree:
> [ 8.913415] Copyright(c) 2003-2013 Intel Corporation
> [ 8.913830] iwlwifi 0000:02:00.0: irq 42 for MSI/MSI-X
> [ 8.916956] media: Linux media interface: v0.10
> [ 8.919813] Linux video capture interface: v2.00
> [ 8.930964] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:6433)
> [ 8.969881] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
> [ 9.010625] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
> [ 9.010821] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> [ 9.010998] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> [ 9.011174] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> [ 9.011347] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> [ 9.011523] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> [ 9.011696] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
> [ 9.083207] iwlwifi 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
> [ 9.091475] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
> [ 9.091580] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
> [ 9.091679] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
> [ 9.091774] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
> [ 9.091867] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P enabled
> [ 9.091962] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
> [ 9.092184] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
> [ 9.105065] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
> [ 9.551529] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15
> [ 9.551739] usbcore: registered new interface driver uvcvideo
> [ 9.551838] USB Video Class driver (1.1.1)
> [ 9.699282] Adding 1535996k swap on /dev/sda8. Priority:-1 extents:1 across:1535996k SS
> [ 10.348146] fuse init (API version 7.22)
> [ 10.844406] EXT3-fs: barriers not enabled
> [ 10.844707] kjournald starting. Commit interval 5 seconds
> [ 10.844818] EXT3-fs (sda7): using internal journal
> [ 10.844918] EXT3-fs (sda7): mounted filesystem with writeback data mode
> [ 10.855294] EXT3-fs: barriers not enabled
> [ 10.855490] kjournald starting. Commit interval 5 seconds
> [ 10.855594] EXT3-fs (sda9): using internal journal
> [ 10.855696] EXT3-fs (sda9): mounted filesystem with writeback data mode
> [ 10.864546] EXT3-fs: barriers not enabled
> [ 10.864787] kjournald starting. Commit interval 5 seconds
> [ 10.864893] EXT3-fs (sda5): using internal journal
> [ 10.864994] EXT3-fs (sda5): mounted filesystem with writeback data mode
> [ 10.873827] EXT3-fs: barriers not enabled
> [ 10.874065] kjournald starting. Commit interval 5 seconds
> [ 10.874169] EXT3-fs (sda6): using internal journal
> [ 10.874270] EXT3-fs (sda6): mounted filesystem with writeback data mode
> [ 11.822545] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
> [ 11.822854] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
> [ 12.170958] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
> [ 12.171305] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
> [ 12.402822] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 12.826591] [drm] Initialized drm 1.1.0 20060810
> [ 12.841869] [drm] Memory usable by graphics device = 2048M
> [ 12.841884] i915 0000:00:02.0: setting latency timer to 64
> [ 12.856066] i915 0000:00:02.0: irq 44 for MSI/MSI-X
> [ 12.856074] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [ 12.856324] [drm] Driver supports precise vblank timestamp query.
> [ 12.856493] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 12.888594] [drm] Wrong MCH_SSKPD value: 0x16040307
> [ 12.888604] [drm] This can cause pipe underruns and display issues.
> [ 12.888607] [drm] Please upgrade your BIOS to fix this.
> [ 12.903479] fbcon: inteldrmfb (fb0) is primary device
> [ 12.903574] Console: switching to colour frame buffer device 170x48
> [ 12.903589] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 12.903592] i915 0000:00:02.0: registered panic notifier
> [ 13.369936] acpi device:37: registered as cooling_device2
> [ 13.525926] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> [ 13.526000] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16
> [ 13.526049] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 14.830827] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 38+ messages in thread
* CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 system starts regular boot when waking from s2ram Fw: [PATCH 2/2] x86: Make Linux guest support optional
2013-05-14 16:01 3.10-rc1 system starts regular boot when waking from s2ram Michal Hocko
@ 2013-05-15 13:17 ` Victor Miasnikov
2013-05-15 9:56 ` Michal Hocko
` (2 subsequent siblings)
3 siblings, 0 replies; 38+ messages in thread
From: Victor Miasnikov @ 2013-05-15 13:17 UTC (permalink / raw)
To: Michal Hocko, Borislav Petkov, linux-pm
Cc: Len Brown, Pavel Machek, Rafael J. Wysocki, LKML, X86 ML,
Greg Kroah-Hartman, devel, olaf, "Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich, Victor
Hi!
b)
See in P.S.
CONFIG_PARAVIRT_GUEST in arch/ia64
a)
config-3.10.0-rc1-fullnohzdisabled
==
# CONFIG_HYPERVISOR_GUEST is not set
==
> - select PARAVIRT_GUEST
> + select HYPERVISOR_GUEST
TO Borislav Petkov : first [but not last :-( ] non-upgraded config . . .
TO All:
Please, replace
CONFIG_PARAVIRT_GUEST=y
with
CONFIG_HYPERVISOR_GUEST=y
{=
patch-3.10-rc1
==
diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index 64630f15f181..0403b51d20ba 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -2,7 +2,7 @@ menu "Microsoft Hyper-V guest support"
config HYPERV
tristate "Microsoft Hyper-V client drivers"
- depends on X86 && ACPI && PCI && X86_LOCAL_APIC
+ depends on X86 && ACPI && PCI && X86_LOCAL_APIC && HYPERVISOR_GUEST
help
Select this option to run Linux as a Hyper-V client operating
system.
==
IMHO, related not only Hyper-V, but XEN, KVM , etc.
( and VMWare
config VMWARE_BALLOON
tristate "VMware Balloon Driver"
- depends on X86
+ depends on X86 && HYPERVISOR_GUEST
)
Best regards, Victor Miasnikov
Blog: http://vvm.blog.tut.by/
P.S.
Is good?
CONFIG_PARAVIRT_GUEST in arch/ia64 :
./linux-3.10-rc1/arch/ia64/include/asm/native/
inst.h
./linux-3.10-rc1/arch/ia64/configs/
xen_domu_defconfig
./linux-3.10-rc1/arch/ia64/include/asm/
hw_irq.h
iosapic.h
paravirt.h
==
. . .
#ifdef CONFIG_PARAVIRT_GUEST
#define PARAVIRT_HYPERVISOR_TYPE_DEFAULT 0
#define PARAVIRT_HYPERVISOR_TYPE_XEN 1
. . .
==
^ permalink raw reply related [flat|nested] 38+ messages in thread
* CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 system starts regular boot when waking from s2ram Fw: [PATCH 2/2] x86: Make Linux guest support optional
@ 2013-05-15 13:17 ` Victor Miasnikov
0 siblings, 0 replies; 38+ messages in thread
From: Victor Miasnikov @ 2013-05-15 13:17 UTC (permalink / raw)
To: Michal Hocko, Borislav Petkov, linux-pm
Cc: Len Brown, Pavel Machek, Rafael J. Wysocki, LKML, X86 ML,
Greg Kroah-Hartman, devel, olaf, "Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich, Victor
Hi!
b)
See in P.S.
CONFIG_PARAVIRT_GUEST in arch/ia64
a)
config-3.10.0-rc1-fullnohzdisabled
==
# CONFIG_HYPERVISOR_GUEST is not set
==
> - select PARAVIRT_GUEST
> + select HYPERVISOR_GUEST
TO Borislav Petkov : first [but not last :-( ] non-upgraded config . . .
TO All:
Please, replace
CONFIG_PARAVIRT_GUEST=y
with
CONFIG_HYPERVISOR_GUEST=y
{=
patch-3.10-rc1
==
diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index 64630f15f181..0403b51d20ba 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -2,7 +2,7 @@ menu "Microsoft Hyper-V guest support"
config HYPERV
tristate "Microsoft Hyper-V client drivers"
- depends on X86 && ACPI && PCI && X86_LOCAL_APIC
+ depends on X86 && ACPI && PCI && X86_LOCAL_APIC && HYPERVISOR_GUEST
help
Select this option to run Linux as a Hyper-V client operating
system.
==
IMHO, related not only Hyper-V, but XEN, KVM , etc.
( and VMWare
config VMWARE_BALLOON
tristate "VMware Balloon Driver"
- depends on X86
+ depends on X86 && HYPERVISOR_GUEST
)
Best regards, Victor Miasnikov
Blog: http://vvm.blog.tut.by/
P.S.
Is good?
CONFIG_PARAVIRT_GUEST in arch/ia64 :
./linux-3.10-rc1/arch/ia64/include/asm/native/
inst.h
./linux-3.10-rc1/arch/ia64/configs/
xen_domu_defconfig
./linux-3.10-rc1/arch/ia64/include/asm/
hw_irq.h
iosapic.h
paravirt.h
==
. . .
#ifdef CONFIG_PARAVIRT_GUEST
#define PARAVIRT_HYPERVISOR_TYPE_DEFAULT 0
#define PARAVIRT_HYPERVISOR_TYPE_XEN 1
. . .
==
^ permalink raw reply related [flat|nested] 38+ messages in thread
* Re: CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 system starts regular boot when waking from s2ram Fw: [PATCH 2/2] x86: Make Linux guest support optional
2013-05-15 13:17 ` Victor Miasnikov
(?)
@ 2013-05-15 13:34 ` Michal Hocko
2013-05-15 13:44 ` Victor Miasnikov
-1 siblings, 1 reply; 38+ messages in thread
From: Michal Hocko @ 2013-05-15 13:34 UTC (permalink / raw)
To: Victor Miasnikov
Cc: Borislav Petkov, linux-pm, Len Brown, Pavel Machek,
Rafael J. Wysocki, LKML, X86 ML, Greg Kroah-Hartman, devel, olaf,
"Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich
On Wed 15-05-13 16:17:09, Victor Miasnikov wrote:
> Hi!
>
> b)
>
> See in P.S.
> CONFIG_PARAVIRT_GUEST in arch/ia64
>
> a)
> config-3.10.0-rc1-fullnohzdisabled
> ==
> # CONFIG_HYPERVISOR_GUEST is not set
> ==
>
> >- select PARAVIRT_GUEST
> >+ select HYPERVISOR_GUEST
I might have missed the previous discussion but how does this relate to
the original problem reported to this (https://lkml.org/lkml/2013/5/14/398)
thread?
I have bisected to the faulty patch and reverting it proved to help
(https://lkml.org/lkml/2013/5/15/160)
For record:
$grep HYPERVISOR_GUEST .config
# CONFIG_HYPERVISOR_GUEST is not set
$grep PARAVIRT_GUEST .config
$
[...]
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 system starts regular boot when waking from s2ram Fw: [PATCH 2/2] x86: Make Linux guest support optional
2013-05-15 13:34 ` Michal Hocko
@ 2013-05-15 13:44 ` Victor Miasnikov
0 siblings, 0 replies; 38+ messages in thread
From: Victor Miasnikov @ 2013-05-15 13:44 UTC (permalink / raw)
To: Michal Hocko
Cc: Borislav Petkov, linux-pm, Len Brown, Pavel Machek,
Rafael J. Wysocki, LKML, X86 ML, Greg Kroah-Hartman, devel, olaf,
"Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich
Hi!
>> >- select PARAVIRT_GUEST
>> >+ select HYPERVISOR_GUEST
>
> I might have missed the previous discussion but how does this relate to
> the original problem reported to this (https://lkml.org/lkml/2013/5/14/398)
> thread?
As example:
https://lkml.org/lkml/2013/5/14/398
==
. . .
# CONFIG_HYPERVISOR_GUEST is not set
. . .
==
> For record:
> $grep HYPERVISOR_GUEST .config
> # CONFIG_HYPERVISOR_GUEST is not set
Why not
CONFIG_HYPERVISOR_GUEST=y
?
> $grep PARAVIRT_GUEST .config
> $
Best regards, Victor Miasnikov
Blog: http://vvm.blog.tut.by/
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 system starts regular boot when waking from s2ram Fw: [PATCH 2/2] x86: Make Linux guest support optional
@ 2013-05-15 13:44 ` Victor Miasnikov
0 siblings, 0 replies; 38+ messages in thread
From: Victor Miasnikov @ 2013-05-15 13:44 UTC (permalink / raw)
To: Michal Hocko
Cc: Borislav Petkov, linux-pm, Len Brown, Pavel Machek,
Rafael J. Wysocki, LKML, X86 ML, Greg Kroah-Hartman, devel, olaf,
"Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich
Hi!
>> >- select PARAVIRT_GUEST
>> >+ select HYPERVISOR_GUEST
>
> I might have missed the previous discussion but how does this relate to
> the original problem reported to this (https://lkml.org/lkml/2013/5/14/398)
> thread?
As example:
https://lkml.org/lkml/2013/5/14/398
==
. . .
# CONFIG_HYPERVISOR_GUEST is not set
. . .
==
> For record:
> $grep HYPERVISOR_GUEST .config
> # CONFIG_HYPERVISOR_GUEST is not set
Why not
CONFIG_HYPERVISOR_GUEST=y
?
> $grep PARAVIRT_GUEST .config
> $
Best regards, Victor Miasnikov
Blog: http://vvm.blog.tut.by/
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 system starts regular boot when waking from s2ram Fw: [PATCH 2/2] x86: Make Linux guest support optional
2013-05-15 13:44 ` Victor Miasnikov
(?)
@ 2013-05-15 13:46 ` Michal Hocko
2013-05-15 14:05 ` Victor Miasnikov
-1 siblings, 1 reply; 38+ messages in thread
From: Michal Hocko @ 2013-05-15 13:46 UTC (permalink / raw)
To: Victor Miasnikov
Cc: Borislav Petkov, linux-pm, Len Brown, Pavel Machek,
Rafael J. Wysocki, LKML, X86 ML, Greg Kroah-Hartman, devel, olaf,
"Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich
On Wed 15-05-13 16:44:05, Victor Miasnikov wrote:
>
> Hi!
>
> >>>- select PARAVIRT_GUEST
> >>>+ select HYPERVISOR_GUEST
> >
> >I might have missed the previous discussion but how does this relate to
> >the original problem reported to this (https://lkml.org/lkml/2013/5/14/398)
> >thread?
>
> As example:
>
> https://lkml.org/lkml/2013/5/14/398
> ==
> . . .
> # CONFIG_HYPERVISOR_GUEST is not set
> . . .
> ==
>
> >For record:
> >$grep HYPERVISOR_GUEST .config
> ># CONFIG_HYPERVISOR_GUEST is not set
>
>
> Why not
> CONFIG_HYPERVISOR_GUEST=y
This is unrelated to the issue discussed in this thread.
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 Fw: [PATCH 2/2] x86: Make Linux guest support optional
2013-05-15 13:46 ` Michal Hocko
@ 2013-05-15 14:05 ` Victor Miasnikov
0 siblings, 0 replies; 38+ messages in thread
From: Victor Miasnikov @ 2013-05-15 14:05 UTC (permalink / raw)
To: Borislav Petkov, linux-pm, Len Brown, Pavel Machek,
Rafael J. Wysocki, LKML, X86 ML, Greg Kroah-Hartman, devel, olaf,
"Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich
Cc: Michal Hocko
Hi!
>> >>>- select PARAVIRT_GUEST
>> >>>+ select HYPERVISOR_GUEST
>> >
>> >I might have missed the previous discussion but how does this relate to
>> >the original problem reported to this (https://lkml.org/lkml/2013/5/14/398)
>> >thread?
>>
>> As example:
>>
>> https://lkml.org/lkml/2013/5/14/398
>> ==
>> . . .
>> # CONFIG_HYPERVISOR_GUEST is not set
>> . . .
>> ==
>>
>> >For record:
>> >$grep HYPERVISOR_GUEST .config
>> ># CONFIG_HYPERVISOR_GUEST is not set
>>
>>
>> Why not
>> CONFIG_HYPERVISOR_GUEST=y
>
> This is unrelated to the issue discussed in this thread.
Yes: Is another 1-2 problem[s], but is problem[s]:
==
TO All:
Please, replace
CONFIG_PARAVIRT_GUEST=y
with
CONFIG_HYPERVISOR_GUEST=y
==
==
Is good?
CONFIG_PARAVIRT_GUEST in arch/ia64 :
./linux-3.10-rc1/arch/ia64/include/asm/native/
inst.h
./linux-3.10-rc1/arch/ia64/configs/
xen_domu_defconfig
./linux-3.10-rc1/arch/ia64/include/asm/
hw_irq.h
iosapic.h
paravirt.h
==
. . .
#ifdef CONFIG_PARAVIRT_GUEST
#define PARAVIRT_HYPERVISOR_TYPE_DEFAULT 0
#define PARAVIRT_HYPERVISOR_TYPE_XEN 1
. . .
==
==
Comments ?
Best regards, Victor Miasnikov
Blog: http://vvm.blog.tut.by/
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 Fw: [PATCH 2/2] x86: Make Linux guest support optional
@ 2013-05-15 14:05 ` Victor Miasnikov
0 siblings, 0 replies; 38+ messages in thread
From: Victor Miasnikov @ 2013-05-15 14:05 UTC (permalink / raw)
To: Borislav Petkov, linux-pm, Len Brown, Pavel Machek,
Rafael J. Wysocki, LKML, X86 ML, Greg Kroah-Hartman, devel, olaf,
"Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich
Cc: Michal Hocko
Hi!
>> >>>- select PARAVIRT_GUEST
>> >>>+ select HYPERVISOR_GUEST
>> >
>> >I might have missed the previous discussion but how does this relate to
>> >the original problem reported to this (https://lkml.org/lkml/2013/5/14/398)
>> >thread?
>>
>> As example:
>>
>> https://lkml.org/lkml/2013/5/14/398
>> ==
>> . . .
>> # CONFIG_HYPERVISOR_GUEST is not set
>> . . .
>> ==
>>
>> >For record:
>> >$grep HYPERVISOR_GUEST .config
>> ># CONFIG_HYPERVISOR_GUEST is not set
>>
>>
>> Why not
>> CONFIG_HYPERVISOR_GUEST=y
>
> This is unrelated to the issue discussed in this thread.
Yes: Is another 1-2 problem[s], but is problem[s]:
==
TO All:
Please, replace
CONFIG_PARAVIRT_GUEST=y
with
CONFIG_HYPERVISOR_GUEST=y
==
==
Is good?
CONFIG_PARAVIRT_GUEST in arch/ia64 :
./linux-3.10-rc1/arch/ia64/include/asm/native/
inst.h
./linux-3.10-rc1/arch/ia64/configs/
xen_domu_defconfig
./linux-3.10-rc1/arch/ia64/include/asm/
hw_irq.h
iosapic.h
paravirt.h
==
. . .
#ifdef CONFIG_PARAVIRT_GUEST
#define PARAVIRT_HYPERVISOR_TYPE_DEFAULT 0
#define PARAVIRT_HYPERVISOR_TYPE_XEN 1
. . .
==
==
Comments ?
Best regards, Victor Miasnikov
Blog: http://vvm.blog.tut.by/
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 Fw: [PATCH 2/2] x86: Make Linux guest support optional
2013-05-15 14:05 ` Victor Miasnikov
(?)
@ 2013-05-15 14:21 ` Borislav Petkov
2013-05-15 14:52 ` Victor Miasnikov
2013-05-15 17:34 ` Luck, Tony
-1 siblings, 2 replies; 38+ messages in thread
From: Borislav Petkov @ 2013-05-15 14:21 UTC (permalink / raw)
To: Tony Luck
Cc: Victor Miasnikov, linux-pm, Len Brown, Pavel Machek,
Rafael J. Wysocki, LKML, X86 ML, Greg Kroah-Hartman, devel, olaf,
"Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich, Michal Hocko
On Wed, May 15, 2013 at 05:05:42PM +0300, Victor Miasnikov wrote:
> CONFIG_PARAVIRT_GUEST in arch/ia64 :
>
> ./linux-3.10-rc1/arch/ia64/include/asm/native/
> inst.h
> ./linux-3.10-rc1/arch/ia64/configs/
> xen_domu_defconfig
> ./linux-3.10-rc1/arch/ia64/include/asm/
> hw_irq.h
> iosapic.h
> paravirt.h
This is only an issue if hyperv or vmware balloon is designed to work on
ia64.
However, both hyperv and vmware balloon depend on X86 so they are never
enabled on ia64.
So the way I see it, it doesn't matter.
Tony, what's your take on this - CONFIG_PARAVIRT_GUEST is
present in ia64 and I recently changed the Kconfig symbol to
CONFIG_HYPERVISOR_GUEST on x86. I can fix it for correctness but is
hyperv and vmware balloon even attempted on ia64?
Btw, it depends on BROKEN on ia64 so I'm already sceptical.
Thanks.
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 Fw: [PATCH 2/2] x86: Make Linux guest support optional
2013-05-15 14:21 ` Borislav Petkov
@ 2013-05-15 14:52 ` Victor Miasnikov
2013-05-15 17:34 ` Luck, Tony
1 sibling, 0 replies; 38+ messages in thread
From: Victor Miasnikov @ 2013-05-15 14:52 UTC (permalink / raw)
To: Borislav Petkov, Tony Luck, Haiyang Zhang, KY Srinivasan
Cc: linux-pm, Len Brown, Pavel Machek, Rafael J. Wysocki, LKML,
X86 ML, Greg Kroah-Hartman, devel, olaf, "Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich, Michal Hocko
Hi!
> . . . depends on BROKEN on ia64 . . .
Is mini-problem [, IMHO]
See example of real problem:
> changed the Kconfig symbol to CONFIG_HYPERVISOR_GUEST on x86.
And when CONFIG_HYPERVISOR_GUEST not set ( IMHO, not special) , as result
linux-mainline ( non-official, but very usefull) v3.10-rc1 2013-05-12 for Arch Linux
not contain
hv_storvsc.ko.gz
as not contain (
hv_vmbus.ko.gz
hv_utils.ko.gz
hv_netvsc.ko.gz
hv_balloon.ko.gz
)
Arch Linux linux-mainline v3.9 contain all this files
i.e. not only "balloon driver[s]"
{=
patch-3.10-rc1
==
diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index 64630f15f181..0403b51d20ba 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -2,7 +2,7 @@ menu "Microsoft Hyper-V guest support"
config HYPERV
tristate "Microsoft Hyper-V client drivers"
- depends on X86 && ACPI && PCI && X86_LOCAL_APIC
+ depends on X86 && ACPI && PCI && X86_LOCAL_APIC && HYPERVISOR_GUEST
help
Select this option to run Linux as a Hyper-V client operating
system.
==
==
@@ -596,44 +592,17 @@ config SCHED_OMIT_FRAME_POINTER
If in doubt, say "Y".
-menuconfig PARAVIRT_GUEST
- bool "Paravirtualized guest support"
+menuconfig HYPERVISOR_GUEST
+ bool "Linux guest support"
---help---
- Say Y here to get to see options related to running Linux under
- various hypervisors. This option alone does not add any kernel code.
+ Say Y here to enable options for running Linux under various hyper-
+ visors. This option enables basic hypervisor detection and platform
+ setup.
- If you say N, all options in this submenu will be skipped and disabled.
+ If you say N, all options in this submenu will be skipped and
+ disabled, and Linux guest support won't be built in.
==
Best regards, Victor Miasnikov
Blog: http://vvm.blog.tut.by/
^ permalink raw reply related [flat|nested] 38+ messages in thread
* Re: CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 Fw: [PATCH 2/2] x86: Make Linux guest support optional
@ 2013-05-15 14:52 ` Victor Miasnikov
0 siblings, 0 replies; 38+ messages in thread
From: Victor Miasnikov @ 2013-05-15 14:52 UTC (permalink / raw)
To: Borislav Petkov, Tony Luck, Haiyang Zhang, KY Srinivasan
Cc: linux-pm, Len Brown, Pavel Machek, Rafael J. Wysocki, LKML,
X86 ML, Greg Kroah-Hartman, devel, olaf, "Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich, Michal Hocko
Hi!
> . . . depends on BROKEN on ia64 . . .
Is mini-problem [, IMHO]
See example of real problem:
> changed the Kconfig symbol to CONFIG_HYPERVISOR_GUEST on x86.
And when CONFIG_HYPERVISOR_GUEST not set ( IMHO, not special) , as result
linux-mainline ( non-official, but very usefull) v3.10-rc1 2013-05-12 for Arch Linux
not contain
hv_storvsc.ko.gz
as not contain (
hv_vmbus.ko.gz
hv_utils.ko.gz
hv_netvsc.ko.gz
hv_balloon.ko.gz
)
Arch Linux linux-mainline v3.9 contain all this files
i.e. not only "balloon driver[s]"
{=
patch-3.10-rc1
==
diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index 64630f15f181..0403b51d20ba 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -2,7 +2,7 @@ menu "Microsoft Hyper-V guest support"
config HYPERV
tristate "Microsoft Hyper-V client drivers"
- depends on X86 && ACPI && PCI && X86_LOCAL_APIC
+ depends on X86 && ACPI && PCI && X86_LOCAL_APIC && HYPERVISOR_GUEST
help
Select this option to run Linux as a Hyper-V client operating
system.
==
==
@@ -596,44 +592,17 @@ config SCHED_OMIT_FRAME_POINTER
If in doubt, say "Y".
-menuconfig PARAVIRT_GUEST
- bool "Paravirtualized guest support"
+menuconfig HYPERVISOR_GUEST
+ bool "Linux guest support"
---help---
- Say Y here to get to see options related to running Linux under
- various hypervisors. This option alone does not add any kernel code.
+ Say Y here to enable options for running Linux under various hyper-
+ visors. This option enables basic hypervisor detection and platform
+ setup.
- If you say N, all options in this submenu will be skipped and disabled.
+ If you say N, all options in this submenu will be skipped and
+ disabled, and Linux guest support won't be built in.
==
Best regards, Victor Miasnikov
Blog: http://vvm.blog.tut.by/
^ permalink raw reply related [flat|nested] 38+ messages in thread
* RE: CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 Fw: [PATCH 2/2] x86: Make Linux guest support optional
2013-05-15 14:21 ` Borislav Petkov
@ 2013-05-15 17:34 ` Luck, Tony
2013-05-15 17:34 ` Luck, Tony
1 sibling, 0 replies; 38+ messages in thread
From: Luck, Tony @ 2013-05-15 17:34 UTC (permalink / raw)
To: Borislav Petkov
Cc: Victor Miasnikov, linux-pm, Brown, Len, Pavel Machek,
Rafael J. Wysocki, LKML, X86 ML, Greg Kroah-Hartman, devel, olaf,
"Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich, Michal Hocko
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 744 bytes --]
> Tony, what's your take on this - CONFIG_PARAVIRT_GUEST is
> present in ia64 and I recently changed the Kconfig symbol to
> CONFIG_HYPERVISOR_GUEST on x86. I can fix it for correctness but is
> hyperv and vmware balloon even attempted on ia64?
>
> Btw, it depends on BROKEN on ia64 so I'm already sceptical.
We added "BROKEN" in the middle of last year because this was
kicking out too many errors in Fengguang's zero-day build system.
Essentially all this stuff has been unmaintained for a while now,
and it doesn't seem that anyone is going to start caring about it
again.
-Tony
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 38+ messages in thread
* RE: CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 Fw: [PATCH 2/2] x86: Make Linux guest support optional
@ 2013-05-15 17:34 ` Luck, Tony
0 siblings, 0 replies; 38+ messages in thread
From: Luck, Tony @ 2013-05-15 17:34 UTC (permalink / raw)
To: Borislav Petkov
Cc: Victor Miasnikov, linux-pm, Brown, Len, Pavel Machek,
Rafael J. Wysocki, LKML, X86 ML, Greg Kroah-Hartman, devel, olaf,
"Andy Whitcroft",
jasowang, Thomas Gleixner, JBeulich, Michal Hocko
> Tony, what's your take on this - CONFIG_PARAVIRT_GUEST is
> present in ia64 and I recently changed the Kconfig symbol to
> CONFIG_HYPERVISOR_GUEST on x86. I can fix it for correctness but is
> hyperv and vmware balloon even attempted on ia64?
>
> Btw, it depends on BROKEN on ia64 so I'm already sceptical.
We added "BROKEN" in the middle of last year because this was
kicking out too many errors in Fengguang's zero-day build system.
Essentially all this stuff has been unmaintained for a while now,
and it doesn't seem that anyone is going to start caring about it
again.
-Tony
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: 3.10-rc1 system starts regular boot when waking from s2ram
2013-05-15 9:56 ` Michal Hocko
@ 2013-05-17 7:54 ` Michal Hocko
2013-05-17 12:11 ` Rafael J. Wysocki
0 siblings, 1 reply; 38+ messages in thread
From: Michal Hocko @ 2013-05-17 7:54 UTC (permalink / raw)
To: linux-pm
Cc: Len Brown, Pavel Machek, Rafael J. Wysocki, LKML, H. Peter Anvin,
Fernando Luis Vázquez Cao, x86
On Wed 15-05-13 11:56:08, Michal Hocko wrote:
> OK, I have bisected it to 78d77df7 (x86-64, init: Do not set NX bits on
> non-NX capable hardware). Reverting the patch on top of 3.10-rc1 fixes
> the issue for me and the machine resumes just fine.
>
> Let's add involved people to the CC.
>
> The original message with the confing and dmesg is bellow.
Anybody had chance to look at this? I am quite surprised that something
that is in init code might influence resume from suspend path. Or is it
just a side effect of some other changes in that area?
<goes and checks the latest 3.9 stable which has the backport of the patch>
Yes the latest stable is affected as well!
>
> On Tue 14-05-13 18:01:08, Michal Hocko wrote:
> > Hi,
> > I am not able to make my system wake up from s2ram with 3.10-rc1. The
> > system simply starts booting as if it wasn't suspended. 3.9 works
> > without any issues.
> >
> > pm_test testing (with no_console_suspend) shows that platform is the
> > last mode which wakes up normally. processors mode already starts with a
> > regular boot. The log doesn't say anything interesting:
> >
> > $ echo processors > /sys/power/pm_test
> > $ echo mem > /sys/power/state
> > [ 61.012533] PM: Syncing filesystems ... done.
> > [ 61.017944] Freezing user space processes ... (elapsed 0.01 seconds) done.
> > [ 61.033050] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> > [ 61.081647] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> > [ 61.081724] sd 0:0:0:0: [sda] Stopping disk
> >
> > then it waits for 5s as expected and starts booting from scratch without
> > anything in the log.
> >
> > Same test with
> > $ echo platform > /sys/power/pm_test
> > $ echo mem > /sys/power/state
> > [ 34.960477] PM: Syncing filesystems ... done.
> > [ 34.967624] Freezing user space processes ... (elapsed 0.01 seconds) done.
> > [ 34.983936] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> > [ 35.056655] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> > [ 35.056800] sd 0:0:0:0: [sda] Stopping disk
> > [ 41.255957] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> > [ 41.316267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > [ 41.316354] ata5: SATA link down (SStatus 0 SControl 300)
> > [ 41.316428] ata4: SATA link down (SStatus 0 SControl 300)
> > [ 41.316507] ata6: SATA link down (SStatus 0 SControl 300)
> > [ 41.316958] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > [ 41.388315] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > [ 41.389142] ata1.00: configured for UDMA/133
> > [ 41.391172] ata2.00: configured for UDMA/100
> > [ 41.396198] sd 0:0:0:0: [sda] Starting disk
> > [ 41.396533] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
> > [ 41.396767] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
> > [ 41.638698] PM: resume of devices complete after 724.548 msecs
> > [ 41.638835] Restarting tasks ... done.
> > [ 41.640747] video LNXVIDEO:00: Restoring backlight state
> > [ 42.848988] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> > [ 42.850380] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
> > [ 42.850380] TDH <0>
> > [ 42.850380] TDT <11>
> > [ 42.850380] next_to_use <11>
> > [ 42.850380] next_to_clean <0>
> > [ 42.850380] buffer_info[next_to_clean]:
> > [ 42.850380] time_stamp <ffff034b>
> > [ 42.850380] next_to_watch <0>
> > [ 42.850380] jiffies <ffff04d9>
> > [ 42.850380] next_to_watch.status <0>
> > [ 42.850380] MAC Status <80000>
> > [ 42.850380] PHY Status <7949>
> > [ 42.850380] PHY 1000BASE-T Status <0>
> > [ 42.850380] PHY Extended Status <3000>
> > [ 42.850380] PCI Status <10>
> > [ 44.066855] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
> >
> > Is the issue known? Can I provide more information to help with
> > debugging this issue. I am quite busy to bisect this ATM but can do it
> > if this is the only choice left.
> >
> > Thanks
> > --
> > Michal Hocko
> > SUSE Labs
>
> > #
> > # Automatically generated file; DO NOT EDIT.
> > # Linux/x86_64 3.10.0-rc1-fullnohzdisabled Kernel Configuration
> > #
> > CONFIG_64BIT=y
> > CONFIG_X86_64=y
> > CONFIG_X86=y
> > CONFIG_INSTRUCTION_DECODER=y
> > CONFIG_OUTPUT_FORMAT="elf64-x86-64"
> > CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
> > CONFIG_LOCKDEP_SUPPORT=y
> > CONFIG_STACKTRACE_SUPPORT=y
> > CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> > CONFIG_MMU=y
> > CONFIG_NEED_DMA_MAP_STATE=y
> > CONFIG_NEED_SG_DMA_LENGTH=y
> > CONFIG_GENERIC_ISA_DMA=y
> > CONFIG_GENERIC_BUG=y
> > CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
> > CONFIG_GENERIC_HWEIGHT=y
> > CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> > CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> > CONFIG_GENERIC_CALIBRATE_DELAY=y
> > CONFIG_ARCH_HAS_CPU_RELAX=y
> > CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> > CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
> > CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> > CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
> > CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
> > CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> > CONFIG_ARCH_SUSPEND_POSSIBLE=y
> > CONFIG_ZONE_DMA32=y
> > CONFIG_AUDIT_ARCH=y
> > CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> > CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> > CONFIG_X86_64_SMP=y
> > CONFIG_X86_HT=y
> > CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
> > CONFIG_ARCH_CPU_PROBE_RELEASE=y
> > CONFIG_ARCH_SUPPORTS_UPROBES=y
> > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> > CONFIG_IRQ_WORK=y
> > CONFIG_BUILDTIME_EXTABLE_SORT=y
> >
> > #
> > # General setup
> > #
> > CONFIG_INIT_ENV_ARG_LIMIT=32
> > CONFIG_CROSS_COMPILE=""
> > CONFIG_LOCALVERSION=""
> > CONFIG_LOCALVERSION_AUTO=y
> > CONFIG_HAVE_KERNEL_GZIP=y
> > CONFIG_HAVE_KERNEL_BZIP2=y
> > CONFIG_HAVE_KERNEL_LZMA=y
> > CONFIG_HAVE_KERNEL_XZ=y
> > CONFIG_HAVE_KERNEL_LZO=y
> > CONFIG_KERNEL_GZIP=y
> > # CONFIG_KERNEL_BZIP2 is not set
> > # CONFIG_KERNEL_LZMA is not set
> > # CONFIG_KERNEL_XZ is not set
> > # CONFIG_KERNEL_LZO is not set
> > CONFIG_DEFAULT_HOSTNAME="(none)"
> > CONFIG_SWAP=y
> > CONFIG_SYSVIPC=y
> > CONFIG_SYSVIPC_SYSCTL=y
> > CONFIG_POSIX_MQUEUE=y
> > CONFIG_POSIX_MQUEUE_SYSCTL=y
> > # CONFIG_FHANDLE is not set
> > # CONFIG_AUDIT is not set
> > CONFIG_HAVE_GENERIC_HARDIRQS=y
> >
> > #
> > # IRQ subsystem
> > #
> > CONFIG_GENERIC_HARDIRQS=y
> > CONFIG_GENERIC_IRQ_PROBE=y
> > CONFIG_GENERIC_IRQ_SHOW=y
> > CONFIG_GENERIC_PENDING_IRQ=y
> > CONFIG_IRQ_FORCED_THREADING=y
> > CONFIG_SPARSE_IRQ=y
> > CONFIG_CLOCKSOURCE_WATCHDOG=y
> > CONFIG_ARCH_CLOCKSOURCE_DATA=y
> > CONFIG_ALWAYS_USE_PERSISTENT_CLOCK=y
> > CONFIG_GENERIC_TIME_VSYSCALL=y
> > CONFIG_GENERIC_CLOCKEVENTS=y
> > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> > CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
> > CONFIG_GENERIC_CMOS_UPDATE=y
> >
> > #
> > # Timers subsystem
> > #
> > CONFIG_TICK_ONESHOT=y
> > CONFIG_NO_HZ_COMMON=y
> > # CONFIG_HZ_PERIODIC is not set
> > CONFIG_NO_HZ_IDLE=y
> > # CONFIG_NO_HZ_FULL is not set
> > CONFIG_NO_HZ=y
> > CONFIG_HIGH_RES_TIMERS=y
> >
> > #
> > # CPU/Task time and stats accounting
> > #
> > CONFIG_VIRT_CPU_ACCOUNTING=y
> > # CONFIG_TICK_CPU_ACCOUNTING is not set
> > CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
> > # CONFIG_IRQ_TIME_ACCOUNTING is not set
> > # CONFIG_BSD_PROCESS_ACCT is not set
> > CONFIG_TASKSTATS=y
> > CONFIG_TASK_DELAY_ACCT=y
> > CONFIG_TASK_XACCT=y
> > CONFIG_TASK_IO_ACCOUNTING=y
> >
> > #
> > # RCU Subsystem
> > #
> > CONFIG_TREE_PREEMPT_RCU=y
> > CONFIG_PREEMPT_RCU=y
> > CONFIG_RCU_STALL_COMMON=y
> > CONFIG_CONTEXT_TRACKING=y
> > CONFIG_RCU_USER_QS=y
> > CONFIG_CONTEXT_TRACKING_FORCE=y
> > CONFIG_RCU_FANOUT=32
> > CONFIG_RCU_FANOUT_LEAF=16
> > # CONFIG_RCU_FANOUT_EXACT is not set
> > # CONFIG_RCU_FAST_NO_HZ is not set
> > # CONFIG_TREE_RCU_TRACE is not set
> > # CONFIG_RCU_BOOST is not set
> > CONFIG_RCU_NOCB_CPU=y
> > # CONFIG_RCU_NOCB_CPU_NONE is not set
> > # CONFIG_RCU_NOCB_CPU_ZERO is not set
> > CONFIG_RCU_NOCB_CPU_ALL=y
> > CONFIG_IKCONFIG=y
> > CONFIG_IKCONFIG_PROC=y
> > CONFIG_LOG_BUF_SHIFT=18
> > CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> > CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
> > CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
> > CONFIG_CGROUPS=y
> > # CONFIG_CGROUP_DEBUG is not set
> > # CONFIG_CGROUP_FREEZER is not set
> > # CONFIG_CGROUP_DEVICE is not set
> > # CONFIG_CPUSETS is not set
> > # CONFIG_CGROUP_CPUACCT is not set
> > CONFIG_RESOURCE_COUNTERS=y
> > CONFIG_MEMCG=y
> > CONFIG_MEMCG_SWAP=y
> > CONFIG_MEMCG_SWAP_ENABLED=y
> > CONFIG_MEMCG_KMEM=y
> > # CONFIG_CGROUP_HUGETLB is not set
> > # CONFIG_CGROUP_PERF is not set
> > CONFIG_CGROUP_SCHED=y
> > CONFIG_FAIR_GROUP_SCHED=y
> > # CONFIG_CFS_BANDWIDTH is not set
> > CONFIG_RT_GROUP_SCHED=y
> > # CONFIG_BLK_CGROUP is not set
> > # CONFIG_CHECKPOINT_RESTORE is not set
> > CONFIG_NAMESPACES=y
> > # CONFIG_UTS_NS is not set
> > # CONFIG_IPC_NS is not set
> > # CONFIG_USER_NS is not set
> > # CONFIG_PID_NS is not set
> > # CONFIG_NET_NS is not set
> > CONFIG_UIDGID_CONVERTED=y
> > # CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
> > CONFIG_SCHED_AUTOGROUP=y
> > CONFIG_MM_OWNER=y
> > # CONFIG_SYSFS_DEPRECATED is not set
> > CONFIG_RELAY=y
> > CONFIG_BLK_DEV_INITRD=y
> > CONFIG_INITRAMFS_SOURCE=""
> > CONFIG_RD_GZIP=y
> > CONFIG_RD_BZIP2=y
> > CONFIG_RD_LZMA=y
> > CONFIG_RD_XZ=y
> > CONFIG_RD_LZO=y
> > CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> > CONFIG_SYSCTL=y
> > CONFIG_ANON_INODES=y
> > CONFIG_HAVE_UID16=y
> > CONFIG_SYSCTL_EXCEPTION_TRACE=y
> > CONFIG_HOTPLUG=y
> > CONFIG_HAVE_PCSPKR_PLATFORM=y
> > # CONFIG_EXPERT is not set
> > CONFIG_UID16=y
> > # CONFIG_SYSCTL_SYSCALL is not set
> > CONFIG_KALLSYMS=y
> > CONFIG_KALLSYMS_ALL=y
> > CONFIG_PRINTK=y
> > CONFIG_BUG=y
> > CONFIG_ELF_CORE=y
> > CONFIG_PCSPKR_PLATFORM=y
> > CONFIG_BASE_FULL=y
> > CONFIG_FUTEX=y
> > CONFIG_EPOLL=y
> > CONFIG_SIGNALFD=y
> > CONFIG_TIMERFD=y
> > CONFIG_EVENTFD=y
> > CONFIG_SHMEM=y
> > CONFIG_AIO=y
> > CONFIG_PCI_QUIRKS=y
> > # CONFIG_EMBEDDED is not set
> > CONFIG_HAVE_PERF_EVENTS=y
> >
> > #
> > # Kernel Performance Events And Counters
> > #
> > CONFIG_PERF_EVENTS=y
> > # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
> > CONFIG_VM_EVENT_COUNTERS=y
> > CONFIG_SLUB_DEBUG=y
> > CONFIG_COMPAT_BRK=y
> > # CONFIG_SLAB is not set
> > CONFIG_SLUB=y
> > CONFIG_PROFILING=y
> > CONFIG_TRACEPOINTS=y
> > CONFIG_OPROFILE=y
> > # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
> > CONFIG_HAVE_OPROFILE=y
> > CONFIG_OPROFILE_NMI_TIMER=y
> > CONFIG_KPROBES=y
> > # CONFIG_JUMP_LABEL is not set
> > CONFIG_KPROBES_ON_FTRACE=y
> > CONFIG_UPROBES=y
> > # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
> > CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> > CONFIG_ARCH_USE_BUILTIN_BSWAP=y
> > CONFIG_KRETPROBES=y
> > CONFIG_USER_RETURN_NOTIFIER=y
> > CONFIG_HAVE_IOREMAP_PROT=y
> > CONFIG_HAVE_KPROBES=y
> > CONFIG_HAVE_KRETPROBES=y
> > CONFIG_HAVE_OPTPROBES=y
> > CONFIG_HAVE_KPROBES_ON_FTRACE=y
> > CONFIG_HAVE_ARCH_TRACEHOOK=y
> > CONFIG_HAVE_DMA_ATTRS=y
> > CONFIG_USE_GENERIC_SMP_HELPERS=y
> > CONFIG_GENERIC_SMP_IDLE_THREAD=y
> > CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> > CONFIG_HAVE_DMA_API_DEBUG=y
> > CONFIG_HAVE_HW_BREAKPOINT=y
> > CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
> > CONFIG_HAVE_USER_RETURN_NOTIFIER=y
> > CONFIG_HAVE_PERF_EVENTS_NMI=y
> > CONFIG_HAVE_PERF_REGS=y
> > CONFIG_HAVE_PERF_USER_STACK_DUMP=y
> > CONFIG_HAVE_ARCH_JUMP_LABEL=y
> > CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
> > CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
> > CONFIG_HAVE_CMPXCHG_LOCAL=y
> > CONFIG_HAVE_CMPXCHG_DOUBLE=y
> > CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
> > CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
> > CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
> > CONFIG_SECCOMP_FILTER=y
> > CONFIG_HAVE_CONTEXT_TRACKING=y
> > CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
> > CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
> > CONFIG_MODULES_USE_ELF_RELA=y
> > CONFIG_OLD_SIGSUSPEND3=y
> > CONFIG_COMPAT_OLD_SIGACTION=y
> >
> > #
> > # GCOV-based kernel profiling
> > #
> > # CONFIG_GCOV_KERNEL is not set
> > # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
> > CONFIG_SLABINFO=y
> > CONFIG_RT_MUTEXES=y
> > CONFIG_BASE_SMALL=0
> > CONFIG_MODULES=y
> > # CONFIG_MODULE_FORCE_LOAD is not set
> > CONFIG_MODULE_UNLOAD=y
> > CONFIG_MODULE_FORCE_UNLOAD=y
> > # CONFIG_MODVERSIONS is not set
> > # CONFIG_MODULE_SRCVERSION_ALL is not set
> > # CONFIG_MODULE_SIG is not set
> > CONFIG_STOP_MACHINE=y
> > CONFIG_BLOCK=y
> > # CONFIG_BLK_DEV_BSG is not set
> > # CONFIG_BLK_DEV_BSGLIB is not set
> > # CONFIG_BLK_DEV_INTEGRITY is not set
> >
> > #
> > # Partition Types
> > #
> > CONFIG_PARTITION_ADVANCED=y
> > # CONFIG_ACORN_PARTITION is not set
> > # CONFIG_OSF_PARTITION is not set
> > # CONFIG_AMIGA_PARTITION is not set
> > # CONFIG_ATARI_PARTITION is not set
> > # CONFIG_MAC_PARTITION is not set
> > CONFIG_MSDOS_PARTITION=y
> > CONFIG_BSD_DISKLABEL=y
> > # CONFIG_MINIX_SUBPARTITION is not set
> > # CONFIG_SOLARIS_X86_PARTITION is not set
> > # CONFIG_UNIXWARE_DISKLABEL is not set
> > CONFIG_LDM_PARTITION=y
> > CONFIG_LDM_DEBUG=y
> > # CONFIG_SGI_PARTITION is not set
> > # CONFIG_ULTRIX_PARTITION is not set
> > # CONFIG_SUN_PARTITION is not set
> > # CONFIG_KARMA_PARTITION is not set
> > # CONFIG_EFI_PARTITION is not set
> > # CONFIG_SYSV68_PARTITION is not set
> > CONFIG_BLOCK_COMPAT=y
> >
> > #
> > # IO Schedulers
> > #
> > CONFIG_IOSCHED_NOOP=y
> > CONFIG_IOSCHED_DEADLINE=y
> > CONFIG_IOSCHED_CFQ=y
> > # CONFIG_DEFAULT_DEADLINE is not set
> > CONFIG_DEFAULT_CFQ=y
> > # CONFIG_DEFAULT_NOOP is not set
> > CONFIG_DEFAULT_IOSCHED="cfq"
> > CONFIG_PREEMPT_NOTIFIERS=y
> > CONFIG_UNINLINE_SPIN_UNLOCK=y
> > CONFIG_MUTEX_SPIN_ON_OWNER=y
> > CONFIG_FREEZER=y
> >
> > #
> > # Processor type and features
> > #
> > CONFIG_ZONE_DMA=y
> > CONFIG_SMP=y
> > CONFIG_X86_MPPARSE=y
> > # CONFIG_X86_EXTENDED_PLATFORM is not set
> > # CONFIG_X86_INTEL_LPSS is not set
> > CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
> > CONFIG_SCHED_OMIT_FRAME_POINTER=y
> > # CONFIG_HYPERVISOR_GUEST is not set
> > CONFIG_NO_BOOTMEM=y
> > CONFIG_MEMTEST=y
> > # CONFIG_MK8 is not set
> > # CONFIG_MPSC is not set
> > # CONFIG_MCORE2 is not set
> > # CONFIG_MATOM is not set
> > CONFIG_GENERIC_CPU=y
> > CONFIG_X86_INTERNODE_CACHE_SHIFT=6
> > CONFIG_X86_L1_CACHE_SHIFT=6
> > CONFIG_X86_TSC=y
> > CONFIG_X86_CMPXCHG64=y
> > CONFIG_X86_CMOV=y
> > CONFIG_X86_MINIMUM_CPU_FAMILY=64
> > CONFIG_X86_DEBUGCTLMSR=y
> > CONFIG_CPU_SUP_INTEL=y
> > CONFIG_CPU_SUP_AMD=y
> > CONFIG_CPU_SUP_CENTAUR=y
> > CONFIG_HPET_TIMER=y
> > CONFIG_DMI=y
> > CONFIG_GART_IOMMU=y
> > # CONFIG_CALGARY_IOMMU is not set
> > CONFIG_SWIOTLB=y
> > CONFIG_IOMMU_HELPER=y
> > # CONFIG_MAXSMP is not set
> > CONFIG_NR_CPUS=8
> > CONFIG_SCHED_SMT=y
> > CONFIG_SCHED_MC=y
> > # CONFIG_PREEMPT_NONE is not set
> > # CONFIG_PREEMPT_VOLUNTARY is not set
> > CONFIG_PREEMPT=y
> > CONFIG_PREEMPT_COUNT=y
> > CONFIG_X86_LOCAL_APIC=y
> > CONFIG_X86_IO_APIC=y
> > # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
> > CONFIG_X86_MCE=y
> > CONFIG_X86_MCE_INTEL=y
> > # CONFIG_X86_MCE_AMD is not set
> > CONFIG_X86_MCE_THRESHOLD=y
> > # CONFIG_X86_MCE_INJECT is not set
> > CONFIG_X86_THERMAL_VECTOR=y
> > # CONFIG_I8K is not set
> > CONFIG_MICROCODE=y
> > CONFIG_MICROCODE_INTEL=y
> > # CONFIG_MICROCODE_AMD is not set
> > CONFIG_MICROCODE_OLD_INTERFACE=y
> > CONFIG_MICROCODE_INTEL_LIB=y
> > CONFIG_MICROCODE_INTEL_EARLY=y
> > CONFIG_MICROCODE_EARLY=y
> > CONFIG_X86_MSR=y
> > CONFIG_X86_CPUID=y
> > CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
> > CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> > CONFIG_DIRECT_GBPAGES=y
> > # CONFIG_NUMA is not set
> > CONFIG_ARCH_SPARSEMEM_ENABLE=y
> > CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> > CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> > CONFIG_ARCH_MEMORY_PROBE=y
> > CONFIG_ARCH_PROC_KCORE_TEXT=y
> > CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
> > CONFIG_SELECT_MEMORY_MODEL=y
> > CONFIG_SPARSEMEM_MANUAL=y
> > CONFIG_SPARSEMEM=y
> > CONFIG_HAVE_MEMORY_PRESENT=y
> > CONFIG_SPARSEMEM_EXTREME=y
> > CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> > CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
> > CONFIG_SPARSEMEM_VMEMMAP=y
> > CONFIG_HAVE_MEMBLOCK=y
> > CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
> > CONFIG_ARCH_DISCARD_MEMBLOCK=y
> > CONFIG_MEMORY_ISOLATION=y
> > CONFIG_HAVE_BOOTMEM_INFO_NODE=y
> > CONFIG_MEMORY_HOTPLUG=y
> > CONFIG_MEMORY_HOTPLUG_SPARSE=y
> > CONFIG_MEMORY_HOTREMOVE=y
> > CONFIG_PAGEFLAGS_EXTENDED=y
> > CONFIG_SPLIT_PTLOCK_CPUS=4
> > CONFIG_COMPACTION=y
> > CONFIG_MIGRATION=y
> > CONFIG_PHYS_ADDR_T_64BIT=y
> > CONFIG_ZONE_DMA_FLAG=1
> > CONFIG_BOUNCE=y
> > CONFIG_VIRT_TO_BUS=y
> > CONFIG_MMU_NOTIFIER=y
> > CONFIG_KSM=y
> > CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> > CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
> > # CONFIG_MEMORY_FAILURE is not set
> > CONFIG_TRANSPARENT_HUGEPAGE=y
> > CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
> > # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
> > # CONFIG_CROSS_MEMORY_ATTACH is not set
> > # CONFIG_CLEANCACHE is not set
> > # CONFIG_FRONTSWAP is not set
> > # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> > CONFIG_X86_RESERVE_LOW=64
> > CONFIG_MTRR=y
> > # CONFIG_MTRR_SANITIZER is not set
> > CONFIG_X86_PAT=y
> > CONFIG_ARCH_USES_PG_UNCACHED=y
> > CONFIG_ARCH_RANDOM=y
> > CONFIG_X86_SMAP=y
> > # CONFIG_EFI is not set
> > CONFIG_SECCOMP=y
> > # CONFIG_CC_STACKPROTECTOR is not set
> > # CONFIG_HZ_100 is not set
> > CONFIG_HZ_250=y
> > # CONFIG_HZ_300 is not set
> > # CONFIG_HZ_1000 is not set
> > CONFIG_HZ=250
> > CONFIG_SCHED_HRTICK=y
> > CONFIG_KEXEC=y
> > # CONFIG_CRASH_DUMP is not set
> > # CONFIG_KEXEC_JUMP is not set
> > CONFIG_PHYSICAL_START=0x1000000
> > CONFIG_RELOCATABLE=y
> > CONFIG_PHYSICAL_ALIGN=0x1000000
> > CONFIG_HOTPLUG_CPU=y
> > # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
> > # CONFIG_DEBUG_HOTPLUG_CPU0 is not set
> > CONFIG_COMPAT_VDSO=y
> > # CONFIG_CMDLINE_BOOL is not set
> > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> > CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
> >
> > #
> > # Power management and ACPI options
> > #
> > CONFIG_ARCH_HIBERNATION_HEADER=y
> > CONFIG_SUSPEND=y
> > CONFIG_SUSPEND_FREEZER=y
> > CONFIG_HIBERNATE_CALLBACKS=y
> > CONFIG_HIBERNATION=y
> > CONFIG_PM_STD_PARTITION=""
> > CONFIG_PM_SLEEP=y
> > CONFIG_PM_SLEEP_SMP=y
> > # CONFIG_PM_AUTOSLEEP is not set
> > # CONFIG_PM_WAKELOCKS is not set
> > # CONFIG_PM_RUNTIME is not set
> > CONFIG_PM=y
> > CONFIG_PM_DEBUG=y
> > # CONFIG_PM_ADVANCED_DEBUG is not set
> > CONFIG_PM_SLEEP_DEBUG=y
> > # CONFIG_PM_TRACE_RTC is not set
> > CONFIG_ACPI=y
> > CONFIG_ACPI_SLEEP=y
> > # CONFIG_ACPI_PROCFS is not set
> > # CONFIG_ACPI_PROCFS_POWER is not set
> > # CONFIG_ACPI_EC_DEBUGFS is not set
> > CONFIG_ACPI_PROC_EVENT=y
> > CONFIG_ACPI_AC=y
> > CONFIG_ACPI_BATTERY=y
> > CONFIG_ACPI_BUTTON=y
> > CONFIG_ACPI_VIDEO=m
> > CONFIG_ACPI_FAN=y
> > CONFIG_ACPI_DOCK=y
> > CONFIG_ACPI_I2C=m
> > CONFIG_ACPI_PROCESSOR=y
> > CONFIG_ACPI_HOTPLUG_CPU=y
> > # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
> > CONFIG_ACPI_THERMAL=y
> > # CONFIG_ACPI_CUSTOM_DSDT is not set
> > # CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
> > CONFIG_ACPI_BLACKLIST_YEAR=0
> > CONFIG_ACPI_DEBUG=y
> > # CONFIG_ACPI_PCI_SLOT is not set
> > CONFIG_X86_PM_TIMER=y
> > CONFIG_ACPI_CONTAINER=y
> > # CONFIG_ACPI_HOTPLUG_MEMORY is not set
> > # CONFIG_ACPI_SBS is not set
> > # CONFIG_ACPI_HED is not set
> > # CONFIG_ACPI_CUSTOM_METHOD is not set
> > # CONFIG_ACPI_APEI is not set
> > # CONFIG_SFI is not set
> >
> > #
> > # CPU Frequency scaling
> > #
> > CONFIG_CPU_FREQ=y
> > CONFIG_CPU_FREQ_TABLE=y
> > CONFIG_CPU_FREQ_GOV_COMMON=y
> > CONFIG_CPU_FREQ_STAT=y
> > # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> > CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> > CONFIG_CPU_FREQ_GOV_USERSPACE=y
> > CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> >
> > #
> > # x86 CPU frequency scaling drivers
> > #
> > # CONFIG_X86_INTEL_PSTATE is not set
> > # CONFIG_X86_PCC_CPUFREQ is not set
> > CONFIG_X86_ACPI_CPUFREQ=y
> > CONFIG_X86_ACPI_CPUFREQ_CPB=y
> > # CONFIG_X86_POWERNOW_K8 is not set
> > # CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
> > # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> > # CONFIG_X86_P4_CLOCKMOD is not set
> >
> > #
> > # shared options
> > #
> > # CONFIG_X86_SPEEDSTEP_LIB is not set
> > CONFIG_CPU_IDLE=y
> > # CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
> > CONFIG_CPU_IDLE_GOV_LADDER=y
> > CONFIG_CPU_IDLE_GOV_MENU=y
> > # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
> > # CONFIG_INTEL_IDLE is not set
> >
> > #
> > # Memory power savings
> > #
> > # CONFIG_I7300_IDLE is not set
> >
> > #
> > # Bus options (PCI etc.)
> > #
> > CONFIG_PCI=y
> > CONFIG_PCI_DIRECT=y
> > CONFIG_PCI_MMCONFIG=y
> > CONFIG_PCI_DOMAINS=y
> > # CONFIG_PCIEPORTBUS is not set
> > CONFIG_ARCH_SUPPORTS_MSI=y
> > CONFIG_PCI_MSI=y
> > # CONFIG_PCI_DEBUG is not set
> > # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
> > # CONFIG_PCI_STUB is not set
> > # CONFIG_HT_IRQ is not set
> > # CONFIG_PCI_IOV is not set
> > # CONFIG_PCI_PRI is not set
> > # CONFIG_PCI_PASID is not set
> > CONFIG_PCI_IOAPIC=y
> > CONFIG_PCI_LABEL=y
> > CONFIG_ISA_DMA_API=y
> > CONFIG_AMD_NB=y
> > # CONFIG_PCCARD is not set
> > # CONFIG_HOTPLUG_PCI is not set
> > # CONFIG_RAPIDIO is not set
> >
> > #
> > # Executable file formats / Emulations
> > #
> > CONFIG_BINFMT_ELF=y
> > CONFIG_COMPAT_BINFMT_ELF=y
> > CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
> > # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> > CONFIG_BINFMT_SCRIPT=y
> > # CONFIG_HAVE_AOUT is not set
> > CONFIG_BINFMT_MISC=m
> > CONFIG_COREDUMP=y
> > CONFIG_IA32_EMULATION=y
> > # CONFIG_IA32_AOUT is not set
> > # CONFIG_X86_X32 is not set
> > CONFIG_COMPAT=y
> > CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
> > CONFIG_SYSVIPC_COMPAT=y
> > CONFIG_KEYS_COMPAT=y
> > CONFIG_HAVE_TEXT_POKE_SMP=y
> > CONFIG_X86_DEV_DMA_OPS=y
> > CONFIG_NET=y
> > CONFIG_COMPAT_NETLINK_MESSAGES=y
> >
> > #
> > # Networking options
> > #
> > CONFIG_PACKET=y
> > # CONFIG_PACKET_DIAG is not set
> > CONFIG_UNIX=y
> > # CONFIG_UNIX_DIAG is not set
> > CONFIG_XFRM=y
> > # CONFIG_XFRM_USER is not set
> > # CONFIG_XFRM_SUB_POLICY is not set
> > # CONFIG_XFRM_MIGRATE is not set
> > # CONFIG_XFRM_STATISTICS is not set
> > # CONFIG_NET_KEY is not set
> > CONFIG_INET=y
> > CONFIG_IP_MULTICAST=y
> > CONFIG_IP_ADVANCED_ROUTER=y
> > # CONFIG_IP_FIB_TRIE_STATS is not set
> > CONFIG_IP_MULTIPLE_TABLES=y
> > CONFIG_IP_ROUTE_MULTIPATH=y
> > CONFIG_IP_ROUTE_VERBOSE=y
> > CONFIG_IP_PNP=y
> > CONFIG_IP_PNP_DHCP=y
> > CONFIG_IP_PNP_BOOTP=y
> > CONFIG_IP_PNP_RARP=y
> > # CONFIG_NET_IPIP is not set
> > # CONFIG_NET_IPGRE_DEMUX is not set
> > CONFIG_NET_IP_TUNNEL=y
> > # CONFIG_IP_MROUTE is not set
> > # CONFIG_ARPD is not set
> > # CONFIG_SYN_COOKIES is not set
> > # CONFIG_NET_IPVTI is not set
> > # CONFIG_INET_AH is not set
> > # CONFIG_INET_ESP is not set
> > # CONFIG_INET_IPCOMP is not set
> > # CONFIG_INET_XFRM_TUNNEL is not set
> > CONFIG_INET_TUNNEL=y
> > CONFIG_INET_XFRM_MODE_TRANSPORT=y
> > CONFIG_INET_XFRM_MODE_TUNNEL=y
> > # CONFIG_INET_XFRM_MODE_BEET is not set
> > CONFIG_INET_LRO=y
> > CONFIG_INET_DIAG=y
> > CONFIG_INET_TCP_DIAG=y
> > # CONFIG_INET_UDP_DIAG is not set
> > # CONFIG_TCP_CONG_ADVANCED is not set
> > CONFIG_TCP_CONG_CUBIC=y
> > CONFIG_DEFAULT_TCP_CONG="cubic"
> > # CONFIG_TCP_MD5SIG is not set
> > CONFIG_IPV6=y
> > # CONFIG_IPV6_PRIVACY is not set
> > # CONFIG_IPV6_ROUTER_PREF is not set
> > # CONFIG_IPV6_OPTIMISTIC_DAD is not set
> > # CONFIG_INET6_AH is not set
> > # CONFIG_INET6_ESP is not set
> > # CONFIG_INET6_IPCOMP is not set
> > # CONFIG_IPV6_MIP6 is not set
> > # CONFIG_INET6_XFRM_TUNNEL is not set
> > # CONFIG_INET6_TUNNEL is not set
> > CONFIG_INET6_XFRM_MODE_TRANSPORT=y
> > CONFIG_INET6_XFRM_MODE_TUNNEL=y
> > # CONFIG_INET6_XFRM_MODE_BEET is not set
> > # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
> > CONFIG_IPV6_SIT=y
> > # CONFIG_IPV6_SIT_6RD is not set
> > CONFIG_IPV6_NDISC_NODETYPE=y
> > # CONFIG_IPV6_TUNNEL is not set
> > # CONFIG_IPV6_GRE is not set
> > # CONFIG_IPV6_MULTIPLE_TABLES is not set
> > # CONFIG_IPV6_MROUTE is not set
> > # CONFIG_NETWORK_SECMARK is not set
> > # CONFIG_NETWORK_PHY_TIMESTAMPING is not set
> > CONFIG_NETFILTER=y
> > # CONFIG_NETFILTER_DEBUG is not set
> > CONFIG_NETFILTER_ADVANCED=y
> > CONFIG_BRIDGE_NETFILTER=y
> >
> > #
> > # Core Netfilter Configuration
> > #
> > CONFIG_NETFILTER_NETLINK=m
> > # CONFIG_NETFILTER_NETLINK_ACCT is not set
> > CONFIG_NETFILTER_NETLINK_QUEUE=m
> > CONFIG_NETFILTER_NETLINK_LOG=m
> > CONFIG_NF_CONNTRACK=m
> > CONFIG_NF_CONNTRACK_MARK=y
> > CONFIG_NF_CONNTRACK_PROCFS=y
> > CONFIG_NF_CONNTRACK_EVENTS=y
> > # CONFIG_NF_CONNTRACK_TIMEOUT is not set
> > # CONFIG_NF_CONNTRACK_TIMESTAMP is not set
> > # CONFIG_NF_CT_PROTO_DCCP is not set
> > CONFIG_NF_CT_PROTO_SCTP=m
> > CONFIG_NF_CT_PROTO_UDPLITE=m
> > # CONFIG_NF_CONNTRACK_AMANDA is not set
> > CONFIG_NF_CONNTRACK_FTP=m
> > # CONFIG_NF_CONNTRACK_H323 is not set
> > CONFIG_NF_CONNTRACK_IRC=m
> > CONFIG_NF_CONNTRACK_BROADCAST=m
> > CONFIG_NF_CONNTRACK_NETBIOS_NS=m
> > # CONFIG_NF_CONNTRACK_SNMP is not set
> > # CONFIG_NF_CONNTRACK_PPTP is not set
> > # CONFIG_NF_CONNTRACK_SANE is not set
> > # CONFIG_NF_CONNTRACK_SIP is not set
> > CONFIG_NF_CONNTRACK_TFTP=m
> > # CONFIG_NF_CT_NETLINK is not set
> > # CONFIG_NF_CT_NETLINK_TIMEOUT is not set
> > # CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
> > # CONFIG_NETFILTER_TPROXY is not set
> > CONFIG_NETFILTER_XTABLES=m
> >
> > #
> > # Xtables combined modules
> > #
> > CONFIG_NETFILTER_XT_MARK=m
> > CONFIG_NETFILTER_XT_CONNMARK=m
> >
> > #
> > # Xtables targets
> > #
> > # CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
> > CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
> > # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
> > # CONFIG_NETFILTER_XT_TARGET_CT is not set
> > # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
> > CONFIG_NETFILTER_XT_TARGET_HL=m
> > # CONFIG_NETFILTER_XT_TARGET_HMARK is not set
> > # CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
> > # CONFIG_NETFILTER_XT_TARGET_LED is not set
> > # CONFIG_NETFILTER_XT_TARGET_LOG is not set
> > CONFIG_NETFILTER_XT_TARGET_MARK=m
> > CONFIG_NETFILTER_XT_TARGET_NFLOG=m
> > CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
> > # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
> > CONFIG_NETFILTER_XT_TARGET_RATEEST=m
> > # CONFIG_NETFILTER_XT_TARGET_TEE is not set
> > # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
> > CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
> > # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
> >
> > #
> > # Xtables matches
> > #
> > # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
> > # CONFIG_NETFILTER_XT_MATCH_BPF is not set
> > # CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
> > CONFIG_NETFILTER_XT_MATCH_COMMENT=m
> > CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
> > # CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
> > CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
> > CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
> > CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
> > # CONFIG_NETFILTER_XT_MATCH_CPU is not set
> > CONFIG_NETFILTER_XT_MATCH_DCCP=m
> > # CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
> > CONFIG_NETFILTER_XT_MATCH_DSCP=m
> > CONFIG_NETFILTER_XT_MATCH_ECN=m
> > CONFIG_NETFILTER_XT_MATCH_ESP=m
> > CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
> > CONFIG_NETFILTER_XT_MATCH_HELPER=m
> > CONFIG_NETFILTER_XT_MATCH_HL=m
> > CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
> > CONFIG_NETFILTER_XT_MATCH_LENGTH=m
> > CONFIG_NETFILTER_XT_MATCH_LIMIT=m
> > CONFIG_NETFILTER_XT_MATCH_MAC=m
> > CONFIG_NETFILTER_XT_MATCH_MARK=m
> > CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
> > # CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
> > # CONFIG_NETFILTER_XT_MATCH_OSF is not set
> > CONFIG_NETFILTER_XT_MATCH_OWNER=m
> > CONFIG_NETFILTER_XT_MATCH_POLICY=m
> > # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
> > CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
> > CONFIG_NETFILTER_XT_MATCH_QUOTA=m
> > CONFIG_NETFILTER_XT_MATCH_RATEEST=m
> > # CONFIG_NETFILTER_XT_MATCH_REALM is not set
> > # CONFIG_NETFILTER_XT_MATCH_RECENT is not set
> > CONFIG_NETFILTER_XT_MATCH_SCTP=m
> > CONFIG_NETFILTER_XT_MATCH_STATE=m
> > CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
> > CONFIG_NETFILTER_XT_MATCH_STRING=m
> > CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
> > CONFIG_NETFILTER_XT_MATCH_TIME=m
> > CONFIG_NETFILTER_XT_MATCH_U32=m
> > # CONFIG_IP_SET is not set
> > # CONFIG_IP_VS is not set
> >
> > #
> > # IP: Netfilter Configuration
> > #
> > CONFIG_NF_DEFRAG_IPV4=m
> > CONFIG_NF_CONNTRACK_IPV4=m
> > CONFIG_NF_CONNTRACK_PROC_COMPAT=y
> > CONFIG_IP_NF_IPTABLES=m
> > CONFIG_IP_NF_MATCH_AH=m
> > CONFIG_IP_NF_MATCH_ECN=m
> > # CONFIG_IP_NF_MATCH_RPFILTER is not set
> > CONFIG_IP_NF_MATCH_TTL=m
> > CONFIG_IP_NF_FILTER=m
> > CONFIG_IP_NF_TARGET_REJECT=m
> > CONFIG_IP_NF_TARGET_ULOG=m
> > # CONFIG_NF_NAT_IPV4 is not set
> > CONFIG_IP_NF_MANGLE=m
> > CONFIG_IP_NF_TARGET_CLUSTERIP=m
> > CONFIG_IP_NF_TARGET_ECN=m
> > CONFIG_IP_NF_TARGET_TTL=m
> > CONFIG_IP_NF_RAW=m
> > CONFIG_IP_NF_ARPTABLES=m
> > CONFIG_IP_NF_ARPFILTER=m
> > CONFIG_IP_NF_ARP_MANGLE=m
> >
> > #
> > # IPv6: Netfilter Configuration
> > #
> > # CONFIG_NF_DEFRAG_IPV6 is not set
> > # CONFIG_NF_CONNTRACK_IPV6 is not set
> > # CONFIG_IP6_NF_IPTABLES is not set
> > # CONFIG_BRIDGE_NF_EBTABLES is not set
> > # CONFIG_IP_DCCP is not set
> > # CONFIG_IP_SCTP is not set
> > # CONFIG_RDS is not set
> > # CONFIG_TIPC is not set
> > # CONFIG_ATM is not set
> > # CONFIG_L2TP is not set
> > CONFIG_STP=y
> > CONFIG_BRIDGE=y
> > CONFIG_BRIDGE_IGMP_SNOOPING=y
> > CONFIG_HAVE_NET_DSA=y
> > # CONFIG_VLAN_8021Q is not set
> > # CONFIG_DECNET is not set
> > CONFIG_LLC=y
> > # CONFIG_LLC2 is not set
> > # CONFIG_IPX is not set
> > # CONFIG_ATALK is not set
> > # CONFIG_X25 is not set
> > # CONFIG_LAPB is not set
> > # CONFIG_PHONET is not set
> > # CONFIG_IEEE802154 is not set
> > # CONFIG_NET_SCHED is not set
> > # CONFIG_DCB is not set
> > CONFIG_DNS_RESOLVER=y
> > # CONFIG_BATMAN_ADV is not set
> > # CONFIG_OPENVSWITCH is not set
> > # CONFIG_VSOCKETS is not set
> > # CONFIG_NETLINK_MMAP is not set
> > # CONFIG_NETLINK_DIAG is not set
> > CONFIG_RPS=y
> > CONFIG_RFS_ACCEL=y
> > CONFIG_XPS=y
> > # CONFIG_NETPRIO_CGROUP is not set
> > CONFIG_BQL=y
> > # CONFIG_BPF_JIT is not set
> >
> > #
> > # Network testing
> > #
> > # CONFIG_NET_PKTGEN is not set
> > # CONFIG_NET_TCPPROBE is not set
> > # CONFIG_NET_DROP_MONITOR is not set
> > # CONFIG_HAMRADIO is not set
> > # CONFIG_CAN is not set
> > # CONFIG_IRDA is not set
> > # CONFIG_BT is not set
> > # CONFIG_AF_RXRPC is not set
> > CONFIG_FIB_RULES=y
> > CONFIG_WIRELESS=y
> > CONFIG_WEXT_CORE=y
> > CONFIG_WEXT_PROC=y
> > CONFIG_CFG80211=m
> > # CONFIG_NL80211_TESTMODE is not set
> > # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
> > # CONFIG_CFG80211_REG_DEBUG is not set
> > CONFIG_CFG80211_DEFAULT_PS=y
> > # CONFIG_CFG80211_DEBUGFS is not set
> > # CONFIG_CFG80211_INTERNAL_REGDB is not set
> > CONFIG_CFG80211_WEXT=y
> > # CONFIG_LIB80211 is not set
> > CONFIG_MAC80211=m
> > CONFIG_MAC80211_HAS_RC=y
> > CONFIG_MAC80211_RC_MINSTREL=y
> > CONFIG_MAC80211_RC_MINSTREL_HT=y
> > CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
> > CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
> > # CONFIG_MAC80211_MESH is not set
> > CONFIG_MAC80211_LEDS=y
> > # CONFIG_MAC80211_DEBUGFS is not set
> > # CONFIG_MAC80211_MESSAGE_TRACING is not set
> > # CONFIG_MAC80211_DEBUG_MENU is not set
> > # CONFIG_WIMAX is not set
> > # CONFIG_RFKILL is not set
> > # CONFIG_NET_9P is not set
> > # CONFIG_CAIF is not set
> > # CONFIG_CEPH_LIB is not set
> > # CONFIG_NFC is not set
> > CONFIG_HAVE_BPF_JIT=y
> >
> > #
> > # Device Drivers
> > #
> >
> > #
> > # Generic Driver Options
> > #
> > CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> > # CONFIG_DEVTMPFS is not set
> > CONFIG_STANDALONE=y
> > CONFIG_PREVENT_FIRMWARE_BUILD=y
> > CONFIG_FW_LOADER=y
> > # CONFIG_FIRMWARE_IN_KERNEL is not set
> > CONFIG_EXTRA_FIRMWARE=""
> > CONFIG_FW_LOADER_USER_HELPER=y
> > # CONFIG_DEBUG_DRIVER is not set
> > # CONFIG_DEBUG_DEVRES is not set
> > # CONFIG_SYS_HYPERVISOR is not set
> > # CONFIG_GENERIC_CPU_DEVICES is not set
> > CONFIG_DMA_SHARED_BUFFER=y
> >
> > #
> > # Bus devices
> > #
> > CONFIG_CONNECTOR=m
> > # CONFIG_MTD is not set
> > # CONFIG_PARPORT is not set
> > CONFIG_PNP=y
> > # CONFIG_PNP_DEBUG_MESSAGES is not set
> >
> > #
> > # Protocols
> > #
> > CONFIG_PNPACPI=y
> > CONFIG_BLK_DEV=y
> > # CONFIG_BLK_DEV_FD is not set
> > # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
> > # CONFIG_BLK_CPQ_DA is not set
> > # CONFIG_BLK_CPQ_CISS_DA is not set
> > # CONFIG_BLK_DEV_DAC960 is not set
> > # CONFIG_BLK_DEV_UMEM is not set
> > # CONFIG_BLK_DEV_COW_COMMON is not set
> > CONFIG_BLK_DEV_LOOP=y
> > CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
> > # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> > # CONFIG_BLK_DEV_DRBD is not set
> > # CONFIG_BLK_DEV_NBD is not set
> > # CONFIG_BLK_DEV_NVME is not set
> > # CONFIG_BLK_DEV_SX8 is not set
> > CONFIG_BLK_DEV_RAM=y
> > CONFIG_BLK_DEV_RAM_COUNT=16
> > CONFIG_BLK_DEV_RAM_SIZE=4096
> > # CONFIG_BLK_DEV_XIP is not set
> > # CONFIG_CDROM_PKTCDVD is not set
> > # CONFIG_ATA_OVER_ETH is not set
> > # CONFIG_BLK_DEV_HD is not set
> > # CONFIG_BLK_DEV_RBD is not set
> > # CONFIG_BLK_DEV_RSXX is not set
> >
> > #
> > # Misc devices
> > #
> > # CONFIG_SENSORS_LIS3LV02D is not set
> > # CONFIG_AD525X_DPOT is not set
> > # CONFIG_DUMMY_IRQ is not set
> > # CONFIG_IBM_ASM is not set
> > # CONFIG_PHANTOM is not set
> > # CONFIG_INTEL_MID_PTI is not set
> > # CONFIG_SGI_IOC4 is not set
> > CONFIG_TIFM_CORE=m
> > CONFIG_TIFM_7XX1=m
> > # CONFIG_ICS932S401 is not set
> > # CONFIG_ATMEL_SSC is not set
> > # CONFIG_ENCLOSURE_SERVICES is not set
> > # CONFIG_HP_ILO is not set
> > # CONFIG_APDS9802ALS is not set
> > # CONFIG_ISL29003 is not set
> > # CONFIG_ISL29020 is not set
> > # CONFIG_SENSORS_TSL2550 is not set
> > # CONFIG_SENSORS_BH1780 is not set
> > # CONFIG_SENSORS_BH1770 is not set
> > # CONFIG_SENSORS_APDS990X is not set
> > # CONFIG_HMC6352 is not set
> > # CONFIG_DS1682 is not set
> > # CONFIG_BMP085_I2C is not set
> > # CONFIG_PCH_PHUB is not set
> > # CONFIG_USB_SWITCH_FSA9480 is not set
> > # CONFIG_SRAM is not set
> > # CONFIG_C2PORT is not set
> >
> > #
> > # EEPROM support
> > #
> > # CONFIG_EEPROM_AT24 is not set
> > # CONFIG_EEPROM_LEGACY is not set
> > # CONFIG_EEPROM_MAX6875 is not set
> > # CONFIG_EEPROM_93CX6 is not set
> > CONFIG_CB710_CORE=m
> > # CONFIG_CB710_DEBUG is not set
> > CONFIG_CB710_DEBUG_ASSUMPTIONS=y
> >
> > #
> > # Texas Instruments shared transport line discipline
> > #
> > # CONFIG_SENSORS_LIS3_I2C is not set
> >
> > #
> > # Altera FPGA firmware download module
> > #
> > # CONFIG_ALTERA_STAPL is not set
> > # CONFIG_VMWARE_VMCI is not set
> > CONFIG_HAVE_IDE=y
> > CONFIG_IDE=y
> >
> > #
> > # Please see Documentation/ide/ide.txt for help/info on IDE drives
> > #
> > CONFIG_IDE_XFER_MODE=y
> > CONFIG_IDE_ATAPI=y
> > # CONFIG_BLK_DEV_IDE_SATA is not set
> > CONFIG_IDE_GD=y
> > CONFIG_IDE_GD_ATA=y
> > # CONFIG_IDE_GD_ATAPI is not set
> > CONFIG_BLK_DEV_IDECD=y
> > CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
> > # CONFIG_BLK_DEV_IDETAPE is not set
> > CONFIG_BLK_DEV_IDEACPI=y
> > # CONFIG_IDE_TASK_IOCTL is not set
> > CONFIG_IDE_PROC_FS=y
> >
> > #
> > # IDE chipset support/bugfixes
> > #
> > CONFIG_IDE_GENERIC=y
> > # CONFIG_BLK_DEV_PLATFORM is not set
> > # CONFIG_BLK_DEV_CMD640 is not set
> > # CONFIG_BLK_DEV_IDEPNP is not set
> > CONFIG_BLK_DEV_IDEDMA_SFF=y
> >
> > #
> > # PCI IDE chipsets support
> > #
> > CONFIG_BLK_DEV_IDEPCI=y
> > CONFIG_IDEPCI_PCIBUS_ORDER=y
> > # CONFIG_BLK_DEV_GENERIC is not set
> > # CONFIG_BLK_DEV_OPTI621 is not set
> > # CONFIG_BLK_DEV_RZ1000 is not set
> > CONFIG_BLK_DEV_IDEDMA_PCI=y
> > # CONFIG_BLK_DEV_AEC62XX is not set
> > # CONFIG_BLK_DEV_ALI15X3 is not set
> > # CONFIG_BLK_DEV_AMD74XX is not set
> > # CONFIG_BLK_DEV_ATIIXP is not set
> > # CONFIG_BLK_DEV_CMD64X is not set
> > # CONFIG_BLK_DEV_TRIFLEX is not set
> > # CONFIG_BLK_DEV_CS5520 is not set
> > # CONFIG_BLK_DEV_CS5530 is not set
> > # CONFIG_BLK_DEV_HPT366 is not set
> > # CONFIG_BLK_DEV_JMICRON is not set
> > # CONFIG_BLK_DEV_SC1200 is not set
> > CONFIG_BLK_DEV_PIIX=y
> > # CONFIG_BLK_DEV_IT8172 is not set
> > # CONFIG_BLK_DEV_IT8213 is not set
> > # CONFIG_BLK_DEV_IT821X is not set
> > # CONFIG_BLK_DEV_NS87415 is not set
> > # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> > # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> > # CONFIG_BLK_DEV_SVWKS is not set
> > # CONFIG_BLK_DEV_SIIMAGE is not set
> > # CONFIG_BLK_DEV_SIS5513 is not set
> > # CONFIG_BLK_DEV_SLC90E66 is not set
> > # CONFIG_BLK_DEV_TRM290 is not set
> > # CONFIG_BLK_DEV_VIA82CXXX is not set
> > # CONFIG_BLK_DEV_TC86C001 is not set
> > CONFIG_BLK_DEV_IDEDMA=y
> >
> > #
> > # SCSI device support
> > #
> > CONFIG_SCSI_MOD=y
> > # CONFIG_RAID_ATTRS is not set
> > CONFIG_SCSI=y
> > CONFIG_SCSI_DMA=y
> > # CONFIG_SCSI_TGT is not set
> > # CONFIG_SCSI_NETLINK is not set
> > # CONFIG_SCSI_PROC_FS is not set
> >
> > #
> > # SCSI support type (disk, tape, CD-ROM)
> > #
> > CONFIG_BLK_DEV_SD=y
> > # CONFIG_CHR_DEV_ST is not set
> > # CONFIG_CHR_DEV_OSST is not set
> > CONFIG_BLK_DEV_SR=y
> > # CONFIG_BLK_DEV_SR_VENDOR is not set
> > CONFIG_CHR_DEV_SG=y
> > # CONFIG_CHR_DEV_SCH is not set
> > # CONFIG_SCSI_MULTI_LUN is not set
> > # CONFIG_SCSI_CONSTANTS is not set
> > # CONFIG_SCSI_LOGGING is not set
> > # CONFIG_SCSI_SCAN_ASYNC is not set
> >
> > #
> > # SCSI Transports
> > #
> > CONFIG_SCSI_SPI_ATTRS=y
> > # CONFIG_SCSI_FC_ATTRS is not set
> > # CONFIG_SCSI_ISCSI_ATTRS is not set
> > # CONFIG_SCSI_SAS_ATTRS is not set
> > # CONFIG_SCSI_SAS_LIBSAS is not set
> > # CONFIG_SCSI_SRP_ATTRS is not set
> > # CONFIG_SCSI_LOWLEVEL is not set
> > # CONFIG_SCSI_DH is not set
> > # CONFIG_SCSI_OSD_INITIATOR is not set
> > CONFIG_ATA=y
> > # CONFIG_ATA_NONSTANDARD is not set
> > CONFIG_ATA_VERBOSE_ERROR=y
> > CONFIG_ATA_ACPI=y
> > # CONFIG_SATA_ZPODD is not set
> > # CONFIG_SATA_PMP is not set
> >
> > #
> > # Controllers with non-SFF native interface
> > #
> > CONFIG_SATA_AHCI=y
> > # CONFIG_SATA_AHCI_PLATFORM is not set
> > # CONFIG_SATA_INIC162X is not set
> > # CONFIG_SATA_ACARD_AHCI is not set
> > # CONFIG_SATA_SIL24 is not set
> > CONFIG_ATA_SFF=y
> >
> > #
> > # SFF controllers with custom DMA interface
> > #
> > # CONFIG_PDC_ADMA is not set
> > # CONFIG_SATA_QSTOR is not set
> > # CONFIG_SATA_SX4 is not set
> > CONFIG_ATA_BMDMA=y
> >
> > #
> > # SATA SFF controllers with BMDMA
> > #
> > CONFIG_ATA_PIIX=y
> > # CONFIG_SATA_HIGHBANK is not set
> > # CONFIG_SATA_MV is not set
> > # CONFIG_SATA_NV is not set
> > # CONFIG_SATA_PROMISE is not set
> > # CONFIG_SATA_SIL is not set
> > # CONFIG_SATA_SIS is not set
> > # CONFIG_SATA_SVW is not set
> > # CONFIG_SATA_ULI is not set
> > # CONFIG_SATA_VIA is not set
> > # CONFIG_SATA_VITESSE is not set
> >
> > #
> > # PATA SFF controllers with BMDMA
> > #
> > # CONFIG_PATA_ALI is not set
> > # CONFIG_PATA_AMD is not set
> > # CONFIG_PATA_ARASAN_CF is not set
> > # CONFIG_PATA_ARTOP is not set
> > # CONFIG_PATA_ATIIXP is not set
> > # CONFIG_PATA_ATP867X is not set
> > # CONFIG_PATA_CMD64X is not set
> > # CONFIG_PATA_CS5520 is not set
> > # CONFIG_PATA_CS5530 is not set
> > # CONFIG_PATA_CS5536 is not set
> > # CONFIG_PATA_CYPRESS is not set
> > # CONFIG_PATA_EFAR is not set
> > # CONFIG_PATA_HPT366 is not set
> > # CONFIG_PATA_HPT37X is not set
> > # CONFIG_PATA_HPT3X2N is not set
> > # CONFIG_PATA_HPT3X3 is not set
> > # CONFIG_PATA_IT8213 is not set
> > # CONFIG_PATA_IT821X is not set
> > # CONFIG_PATA_JMICRON is not set
> > # CONFIG_PATA_MARVELL is not set
> > # CONFIG_PATA_NETCELL is not set
> > # CONFIG_PATA_NINJA32 is not set
> > # CONFIG_PATA_NS87415 is not set
> > # CONFIG_PATA_OLDPIIX is not set
> > # CONFIG_PATA_OPTIDMA is not set
> > # CONFIG_PATA_PDC2027X is not set
> > # CONFIG_PATA_PDC_OLD is not set
> > # CONFIG_PATA_RADISYS is not set
> > # CONFIG_PATA_RDC is not set
> > # CONFIG_PATA_SC1200 is not set
> > # CONFIG_PATA_SCH is not set
> > # CONFIG_PATA_SERVERWORKS is not set
> > # CONFIG_PATA_SIL680 is not set
> > # CONFIG_PATA_SIS is not set
> > # CONFIG_PATA_TOSHIBA is not set
> > # CONFIG_PATA_TRIFLEX is not set
> > # CONFIG_PATA_VIA is not set
> > # CONFIG_PATA_WINBOND is not set
> >
> > #
> > # PIO-only SFF controllers
> > #
> > # CONFIG_PATA_CMD640_PCI is not set
> > # CONFIG_PATA_MPIIX is not set
> > # CONFIG_PATA_NS87410 is not set
> > # CONFIG_PATA_OPTI is not set
> > # CONFIG_PATA_RZ1000 is not set
> >
> > #
> > # Generic fallback / legacy drivers
> > #
> > # CONFIG_PATA_ACPI is not set
> > # CONFIG_ATA_GENERIC is not set
> > # CONFIG_PATA_LEGACY is not set
> > # CONFIG_MD is not set
> > # CONFIG_TARGET_CORE is not set
> > # CONFIG_FUSION is not set
> >
> > #
> > # IEEE 1394 (FireWire) support
> > #
> > # CONFIG_FIREWIRE is not set
> > # CONFIG_FIREWIRE_NOSY is not set
> > # CONFIG_I2O is not set
> > # CONFIG_MACINTOSH_DRIVERS is not set
> > CONFIG_NETDEVICES=y
> > CONFIG_NET_CORE=y
> > # CONFIG_BONDING is not set
> > CONFIG_DUMMY=m
> > # CONFIG_EQUALIZER is not set
> > # CONFIG_NET_FC is not set
> > # CONFIG_MII is not set
> > # CONFIG_NET_TEAM is not set
> > # CONFIG_MACVLAN is not set
> > # CONFIG_VXLAN is not set
> > CONFIG_NETCONSOLE=y
> > CONFIG_NETPOLL=y
> > # CONFIG_NETPOLL_TRAP is not set
> > CONFIG_NET_POLL_CONTROLLER=y
> > CONFIG_TUN=m
> > # CONFIG_VETH is not set
> > # CONFIG_ARCNET is not set
> >
> > #
> > # CAIF transport drivers
> > #
> > # CONFIG_VHOST_NET is not set
> >
> > #
> > # Distributed Switch Architecture drivers
> > #
> > # CONFIG_NET_DSA_MV88E6XXX is not set
> > # CONFIG_NET_DSA_MV88E6060 is not set
> > # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
> > # CONFIG_NET_DSA_MV88E6131 is not set
> > # CONFIG_NET_DSA_MV88E6123_61_65 is not set
> > CONFIG_ETHERNET=y
> > CONFIG_NET_VENDOR_3COM=y
> > # CONFIG_VORTEX is not set
> > # CONFIG_TYPHOON is not set
> > CONFIG_NET_VENDOR_ADAPTEC=y
> > # CONFIG_ADAPTEC_STARFIRE is not set
> > CONFIG_NET_VENDOR_ALTEON=y
> > # CONFIG_ACENIC is not set
> > CONFIG_NET_VENDOR_AMD=y
> > # CONFIG_AMD8111_ETH is not set
> > # CONFIG_PCNET32 is not set
> > CONFIG_NET_VENDOR_ATHEROS=y
> > # CONFIG_ATL2 is not set
> > # CONFIG_ATL1 is not set
> > # CONFIG_ATL1E is not set
> > # CONFIG_ATL1C is not set
> > CONFIG_NET_CADENCE=y
> > # CONFIG_ARM_AT91_ETHER is not set
> > # CONFIG_MACB is not set
> > CONFIG_NET_VENDOR_BROADCOM=y
> > # CONFIG_B44 is not set
> > # CONFIG_BNX2 is not set
> > # CONFIG_CNIC is not set
> > # CONFIG_TIGON3 is not set
> > # CONFIG_BNX2X is not set
> > CONFIG_NET_VENDOR_BROCADE=y
> > # CONFIG_BNA is not set
> > # CONFIG_NET_CALXEDA_XGMAC is not set
> > CONFIG_NET_VENDOR_CHELSIO=y
> > # CONFIG_CHELSIO_T1 is not set
> > # CONFIG_CHELSIO_T3 is not set
> > # CONFIG_CHELSIO_T4 is not set
> > # CONFIG_CHELSIO_T4VF is not set
> > CONFIG_NET_VENDOR_CISCO=y
> > # CONFIG_ENIC is not set
> > # CONFIG_DNET is not set
> > CONFIG_NET_VENDOR_DEC=y
> > # CONFIG_NET_TULIP is not set
> > CONFIG_NET_VENDOR_DLINK=y
> > # CONFIG_DL2K is not set
> > # CONFIG_SUNDANCE is not set
> > CONFIG_NET_VENDOR_EMULEX=y
> > # CONFIG_BE2NET is not set
> > CONFIG_NET_VENDOR_EXAR=y
> > # CONFIG_S2IO is not set
> > # CONFIG_VXGE is not set
> > CONFIG_NET_VENDOR_HP=y
> > # CONFIG_HP100 is not set
> > CONFIG_NET_VENDOR_INTEL=y
> > # CONFIG_E100 is not set
> > # CONFIG_E1000 is not set
> > CONFIG_E1000E=y
> > # CONFIG_IGB is not set
> > # CONFIG_IGBVF is not set
> > # CONFIG_IXGB is not set
> > # CONFIG_IXGBE is not set
> > # CONFIG_IXGBEVF is not set
> > # CONFIG_NET_VENDOR_I825XX is not set
> > # CONFIG_IP1000 is not set
> > # CONFIG_JME is not set
> > CONFIG_NET_VENDOR_MARVELL=y
> > # CONFIG_MVMDIO is not set
> > # CONFIG_SKGE is not set
> > CONFIG_SKY2=y
> > # CONFIG_SKY2_DEBUG is not set
> > CONFIG_NET_VENDOR_MELLANOX=y
> > # CONFIG_MLX4_EN is not set
> > # CONFIG_MLX4_CORE is not set
> > CONFIG_NET_VENDOR_MICREL=y
> > # CONFIG_KS8851_MLL is not set
> > # CONFIG_KSZ884X_PCI is not set
> > CONFIG_NET_VENDOR_MYRI=y
> > # CONFIG_MYRI10GE is not set
> > # CONFIG_FEALNX is not set
> > CONFIG_NET_VENDOR_NATSEMI=y
> > # CONFIG_NATSEMI is not set
> > # CONFIG_NS83820 is not set
> > CONFIG_NET_VENDOR_8390=y
> > # CONFIG_NE2K_PCI is not set
> > CONFIG_NET_VENDOR_NVIDIA=y
> > # CONFIG_FORCEDETH is not set
> > CONFIG_NET_VENDOR_OKI=y
> > # CONFIG_PCH_GBE is not set
> > # CONFIG_ETHOC is not set
> > # CONFIG_NET_PACKET_ENGINE is not set
> > CONFIG_NET_VENDOR_QLOGIC=y
> > # CONFIG_QLA3XXX is not set
> > # CONFIG_QLCNIC is not set
> > # CONFIG_QLGE is not set
> > # CONFIG_NETXEN_NIC is not set
> > CONFIG_NET_VENDOR_REALTEK=y
> > # CONFIG_8139CP is not set
> > # CONFIG_8139TOO is not set
> > # CONFIG_R8169 is not set
> > CONFIG_NET_VENDOR_RDC=y
> > # CONFIG_R6040 is not set
> > CONFIG_NET_VENDOR_SEEQ=y
> > CONFIG_NET_VENDOR_SILAN=y
> > # CONFIG_SC92031 is not set
> > CONFIG_NET_VENDOR_SIS=y
> > # CONFIG_SIS900 is not set
> > # CONFIG_SIS190 is not set
> > # CONFIG_SFC is not set
> > CONFIG_NET_VENDOR_SMSC=y
> > # CONFIG_EPIC100 is not set
> > # CONFIG_SMSC9420 is not set
> > CONFIG_NET_VENDOR_STMICRO=y
> > # CONFIG_STMMAC_ETH is not set
> > CONFIG_NET_VENDOR_SUN=y
> > # CONFIG_HAPPYMEAL is not set
> > # CONFIG_SUNGEM is not set
> > # CONFIG_CASSINI is not set
> > # CONFIG_NIU is not set
> > CONFIG_NET_VENDOR_TEHUTI=y
> > # CONFIG_TEHUTI is not set
> > CONFIG_NET_VENDOR_TI=y
> > # CONFIG_TLAN is not set
> > CONFIG_NET_VENDOR_VIA=y
> > # CONFIG_VIA_RHINE is not set
> > # CONFIG_VIA_VELOCITY is not set
> > CONFIG_NET_VENDOR_WIZNET=y
> > # CONFIG_WIZNET_W5100 is not set
> > # CONFIG_WIZNET_W5300 is not set
> > # CONFIG_FDDI is not set
> > # CONFIG_HIPPI is not set
> > # CONFIG_NET_SB1000 is not set
> > # CONFIG_PHYLIB is not set
> > # CONFIG_PPP is not set
> > # CONFIG_SLIP is not set
> >
> > #
> > # USB Network Adapters
> > #
> > # CONFIG_USB_CATC is not set
> > # CONFIG_USB_KAWETH is not set
> > # CONFIG_USB_PEGASUS is not set
> > # CONFIG_USB_RTL8150 is not set
> > # CONFIG_USB_RTL8152 is not set
> > # CONFIG_USB_USBNET is not set
> > # CONFIG_USB_IPHETH is not set
> > CONFIG_WLAN=y
> > # CONFIG_LIBERTAS_THINFIRM is not set
> > # CONFIG_AIRO is not set
> > # CONFIG_ATMEL is not set
> > # CONFIG_AT76C50X_USB is not set
> > # CONFIG_PRISM54 is not set
> > # CONFIG_USB_ZD1201 is not set
> > # CONFIG_USB_NET_RNDIS_WLAN is not set
> > # CONFIG_RTL8180 is not set
> > # CONFIG_RTL8187 is not set
> > # CONFIG_ADM8211 is not set
> > # CONFIG_MAC80211_HWSIM is not set
> > # CONFIG_MWL8K is not set
> > # CONFIG_ATH_CARDS is not set
> > # CONFIG_B43 is not set
> > # CONFIG_B43LEGACY is not set
> > # CONFIG_BRCMFMAC is not set
> > # CONFIG_HOSTAP is not set
> > # CONFIG_IPW2100 is not set
> > # CONFIG_IPW2200 is not set
> > CONFIG_IWLWIFI=m
> > CONFIG_IWLDVM=m
> > # CONFIG_IWLMVM is not set
> > CONFIG_IWLWIFI_OPMODE_MODULAR=y
> >
> > #
> > # Debugging Options
> > #
> > # CONFIG_IWLWIFI_DEBUG is not set
> > # CONFIG_IWLWIFI_DEVICE_TRACING is not set
> > CONFIG_IWLWIFI_P2P=y
> > # CONFIG_IWL4965 is not set
> > # CONFIG_IWL3945 is not set
> > # CONFIG_LIBERTAS is not set
> > # CONFIG_HERMES is not set
> > # CONFIG_P54_COMMON is not set
> > # CONFIG_RT2X00 is not set
> > # CONFIG_RTLWIFI is not set
> > # CONFIG_WL_TI is not set
> > # CONFIG_ZD1211RW is not set
> > # CONFIG_MWIFIEX is not set
> >
> > #
> > # Enable WiMAX (Networking options) to see the WiMAX drivers
> > #
> > # CONFIG_WAN is not set
> > # CONFIG_VMXNET3 is not set
> > # CONFIG_ISDN is not set
> >
> > #
> > # Input device support
> > #
> > CONFIG_INPUT=y
> > # CONFIG_INPUT_FF_MEMLESS is not set
> > # CONFIG_INPUT_POLLDEV is not set
> > # CONFIG_INPUT_SPARSEKMAP is not set
> > # CONFIG_INPUT_MATRIXKMAP is not set
> >
> > #
> > # Userland interfaces
> > #
> > CONFIG_INPUT_MOUSEDEV=y
> > CONFIG_INPUT_MOUSEDEV_PSAUX=y
> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > # CONFIG_INPUT_JOYDEV is not set
> > CONFIG_INPUT_EVDEV=y
> > # CONFIG_INPUT_EVBUG is not set
> >
> > #
> > # Input Device Drivers
> > #
> > CONFIG_INPUT_KEYBOARD=y
> > # CONFIG_KEYBOARD_ADP5588 is not set
> > # CONFIG_KEYBOARD_ADP5589 is not set
> > CONFIG_KEYBOARD_ATKBD=y
> > # CONFIG_KEYBOARD_QT1070 is not set
> > # CONFIG_KEYBOARD_QT2160 is not set
> > # CONFIG_KEYBOARD_LKKBD is not set
> > # CONFIG_KEYBOARD_TCA6416 is not set
> > # CONFIG_KEYBOARD_TCA8418 is not set
> > # CONFIG_KEYBOARD_LM8323 is not set
> > # CONFIG_KEYBOARD_LM8333 is not set
> > # CONFIG_KEYBOARD_MAX7359 is not set
> > # CONFIG_KEYBOARD_MCS is not set
> > # CONFIG_KEYBOARD_MPR121 is not set
> > # CONFIG_KEYBOARD_NEWTON is not set
> > # CONFIG_KEYBOARD_OPENCORES is not set
> > # CONFIG_KEYBOARD_STOWAWAY is not set
> > # CONFIG_KEYBOARD_SUNKBD is not set
> > # CONFIG_KEYBOARD_XTKBD is not set
> > CONFIG_INPUT_MOUSE=y
> > CONFIG_MOUSE_PS2=y
> > CONFIG_MOUSE_PS2_ALPS=y
> > CONFIG_MOUSE_PS2_LOGIPS2PP=y
> > CONFIG_MOUSE_PS2_SYNAPTICS=y
> > CONFIG_MOUSE_PS2_CYPRESS=y
> > CONFIG_MOUSE_PS2_LIFEBOOK=y
> > CONFIG_MOUSE_PS2_TRACKPOINT=y
> > # CONFIG_MOUSE_PS2_ELANTECH is not set
> > # CONFIG_MOUSE_PS2_SENTELIC is not set
> > # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> > # CONFIG_MOUSE_SERIAL is not set
> > # CONFIG_MOUSE_APPLETOUCH is not set
> > # CONFIG_MOUSE_BCM5974 is not set
> > # CONFIG_MOUSE_CYAPA is not set
> > # CONFIG_MOUSE_VSXXXAA is not set
> > # CONFIG_MOUSE_SYNAPTICS_I2C is not set
> > # CONFIG_MOUSE_SYNAPTICS_USB is not set
> > # CONFIG_INPUT_JOYSTICK is not set
> > # CONFIG_INPUT_TABLET is not set
> > # CONFIG_INPUT_TOUCHSCREEN is not set
> > # CONFIG_INPUT_MISC is not set
> >
> > #
> > # Hardware I/O ports
> > #
> > CONFIG_SERIO=y
> > CONFIG_SERIO_I8042=y
> > # CONFIG_SERIO_SERPORT is not set
> > # CONFIG_SERIO_CT82C710 is not set
> > # CONFIG_SERIO_PCIPS2 is not set
> > CONFIG_SERIO_LIBPS2=y
> > # CONFIG_SERIO_RAW is not set
> > # CONFIG_SERIO_ALTERA_PS2 is not set
> > # CONFIG_SERIO_PS2MULT is not set
> > # CONFIG_SERIO_ARC_PS2 is not set
> > # CONFIG_GAMEPORT is not set
> >
> > #
> > # Character devices
> > #
> > CONFIG_TTY=y
> > CONFIG_VT=y
> > CONFIG_CONSOLE_TRANSLATIONS=y
> > CONFIG_VT_CONSOLE=y
> > CONFIG_VT_CONSOLE_SLEEP=y
> > CONFIG_HW_CONSOLE=y
> > # CONFIG_VT_HW_CONSOLE_BINDING is not set
> > CONFIG_UNIX98_PTYS=y
> > # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> > CONFIG_LEGACY_PTYS=y
> > CONFIG_LEGACY_PTY_COUNT=256
> > # CONFIG_SERIAL_NONSTANDARD is not set
> > # CONFIG_NOZOMI is not set
> > # CONFIG_N_GSM is not set
> > # CONFIG_TRACE_SINK is not set
> > CONFIG_DEVKMEM=y
> >
> > #
> > # Serial drivers
> > #
> > CONFIG_SERIAL_8250=y
> > CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
> > CONFIG_SERIAL_8250_PNP=y
> > CONFIG_SERIAL_8250_CONSOLE=y
> > CONFIG_FIX_EARLYCON_MEM=y
> > CONFIG_SERIAL_8250_DMA=y
> > CONFIG_SERIAL_8250_PCI=y
> > CONFIG_SERIAL_8250_NR_UARTS=4
> > CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> > # CONFIG_SERIAL_8250_EXTENDED is not set
> > # CONFIG_SERIAL_8250_DW is not set
> >
> > #
> > # Non-8250 serial port support
> > #
> > # CONFIG_SERIAL_KGDB_NMI is not set
> > # CONFIG_SERIAL_MFD_HSU is not set
> > CONFIG_SERIAL_CORE=y
> > CONFIG_SERIAL_CORE_CONSOLE=y
> > CONFIG_CONSOLE_POLL=y
> > # CONFIG_SERIAL_JSM is not set
> > # CONFIG_SERIAL_SCCNXP is not set
> > # CONFIG_SERIAL_TIMBERDALE is not set
> > # CONFIG_SERIAL_ALTERA_JTAGUART is not set
> > # CONFIG_SERIAL_ALTERA_UART is not set
> > # CONFIG_SERIAL_PCH_UART is not set
> > # CONFIG_SERIAL_ARC is not set
> > # CONFIG_SERIAL_RP2 is not set
> > # CONFIG_IPMI_HANDLER is not set
> > CONFIG_HW_RANDOM=y
> > # CONFIG_HW_RANDOM_TIMERIOMEM is not set
> > CONFIG_HW_RANDOM_INTEL=y
> > # CONFIG_HW_RANDOM_AMD is not set
> > # CONFIG_HW_RANDOM_VIA is not set
> > # CONFIG_NVRAM is not set
> > # CONFIG_R3964 is not set
> > # CONFIG_APPLICOM is not set
> > # CONFIG_MWAVE is not set
> > CONFIG_RAW_DRIVER=y
> > CONFIG_MAX_RAW_DEVS=256
> > CONFIG_HPET=y
> > CONFIG_HPET_MMAP=y
> > # CONFIG_HANGCHECK_TIMER is not set
> > # CONFIG_TCG_TPM is not set
> > # CONFIG_TELCLOCK is not set
> > CONFIG_DEVPORT=y
> > CONFIG_I2C=m
> > CONFIG_I2C_BOARDINFO=y
> > CONFIG_I2C_COMPAT=y
> > # CONFIG_I2C_CHARDEV is not set
> > # CONFIG_I2C_MUX is not set
> > CONFIG_I2C_HELPER_AUTO=y
> > CONFIG_I2C_ALGOBIT=m
> >
> > #
> > # I2C Hardware Bus support
> > #
> >
> > #
> > # PC SMBus host controller drivers
> > #
> > # CONFIG_I2C_ALI1535 is not set
> > # CONFIG_I2C_ALI1563 is not set
> > # CONFIG_I2C_ALI15X3 is not set
> > # CONFIG_I2C_AMD756 is not set
> > # CONFIG_I2C_AMD8111 is not set
> > CONFIG_I2C_I801=m
> > # CONFIG_I2C_ISCH is not set
> > # CONFIG_I2C_ISMT is not set
> > # CONFIG_I2C_PIIX4 is not set
> > # CONFIG_I2C_NFORCE2 is not set
> > # CONFIG_I2C_SIS5595 is not set
> > # CONFIG_I2C_SIS630 is not set
> > # CONFIG_I2C_SIS96X is not set
> > # CONFIG_I2C_VIA is not set
> > # CONFIG_I2C_VIAPRO is not set
> >
> > #
> > # ACPI drivers
> > #
> > # CONFIG_I2C_SCMI is not set
> >
> > #
> > # I2C system bus drivers (mostly embedded / system-on-chip)
> > #
> > # CONFIG_I2C_DESIGNWARE_PCI is not set
> > # CONFIG_I2C_EG20T is not set
> > # CONFIG_I2C_INTEL_MID is not set
> > # CONFIG_I2C_OCORES is not set
> > # CONFIG_I2C_PCA_PLATFORM is not set
> > # CONFIG_I2C_PXA_PCI is not set
> > # CONFIG_I2C_SIMTEC is not set
> > # CONFIG_I2C_XILINX is not set
> >
> > #
> > # External I2C/SMBus adapter drivers
> > #
> > # CONFIG_I2C_DIOLAN_U2C is not set
> > # CONFIG_I2C_PARPORT_LIGHT is not set
> > # CONFIG_I2C_TAOS_EVM is not set
> > # CONFIG_I2C_TINY_USB is not set
> >
> > #
> > # Other I2C/SMBus bus drivers
> > #
> > # CONFIG_I2C_STUB is not set
> > # CONFIG_I2C_DEBUG_CORE is not set
> > # CONFIG_I2C_DEBUG_ALGO is not set
> > # CONFIG_I2C_DEBUG_BUS is not set
> > # CONFIG_SPI is not set
> >
> > #
> > # Qualcomm MSM SSBI bus support
> > #
> > # CONFIG_SSBI is not set
> > # CONFIG_HSI is not set
> >
> > #
> > # PPS support
> > #
> > CONFIG_PPS=y
> > # CONFIG_PPS_DEBUG is not set
> >
> > #
> > # PPS clients support
> > #
> > # CONFIG_PPS_CLIENT_KTIMER is not set
> > # CONFIG_PPS_CLIENT_LDISC is not set
> > # CONFIG_PPS_CLIENT_GPIO is not set
> >
> > #
> > # PPS generators support
> > #
> >
> > #
> > # PTP clock support
> > #
> > CONFIG_PTP_1588_CLOCK=y
> >
> > #
> > # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
> > #
> > # CONFIG_PTP_1588_CLOCK_PCH is not set
> > CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> > CONFIG_GPIO_DEVRES=y
> > # CONFIG_GPIOLIB is not set
> > # CONFIG_W1 is not set
> > CONFIG_POWER_SUPPLY=y
> > # CONFIG_POWER_SUPPLY_DEBUG is not set
> > # CONFIG_PDA_POWER is not set
> > # CONFIG_TEST_POWER is not set
> > # CONFIG_BATTERY_DS2780 is not set
> > # CONFIG_BATTERY_DS2781 is not set
> > # CONFIG_BATTERY_DS2782 is not set
> > # CONFIG_BATTERY_SBS is not set
> > # CONFIG_BATTERY_BQ27x00 is not set
> > # CONFIG_BATTERY_MAX17040 is not set
> > # CONFIG_BATTERY_MAX17042 is not set
> > # CONFIG_CHARGER_MAX8903 is not set
> > # CONFIG_CHARGER_LP8727 is not set
> > # CONFIG_CHARGER_BQ2415X is not set
> > # CONFIG_CHARGER_SMB347 is not set
> > # CONFIG_BATTERY_GOLDFISH is not set
> > # CONFIG_POWER_RESET is not set
> > # CONFIG_POWER_AVS is not set
> > CONFIG_HWMON=m
> > # CONFIG_HWMON_VID is not set
> > # CONFIG_HWMON_DEBUG_CHIP is not set
> >
> > #
> > # Native drivers
> > #
> > # CONFIG_SENSORS_ABITUGURU is not set
> > # CONFIG_SENSORS_ABITUGURU3 is not set
> > # CONFIG_SENSORS_AD7414 is not set
> > # CONFIG_SENSORS_AD7418 is not set
> > # CONFIG_SENSORS_ADM1021 is not set
> > # CONFIG_SENSORS_ADM1025 is not set
> > # CONFIG_SENSORS_ADM1026 is not set
> > # CONFIG_SENSORS_ADM1029 is not set
> > # CONFIG_SENSORS_ADM1031 is not set
> > # CONFIG_SENSORS_ADM9240 is not set
> > # CONFIG_SENSORS_ADT7410 is not set
> > # CONFIG_SENSORS_ADT7411 is not set
> > # CONFIG_SENSORS_ADT7462 is not set
> > # CONFIG_SENSORS_ADT7470 is not set
> > # CONFIG_SENSORS_ADT7475 is not set
> > # CONFIG_SENSORS_ASC7621 is not set
> > # CONFIG_SENSORS_K8TEMP is not set
> > # CONFIG_SENSORS_K10TEMP is not set
> > # CONFIG_SENSORS_FAM15H_POWER is not set
> > # CONFIG_SENSORS_ASB100 is not set
> > # CONFIG_SENSORS_ATXP1 is not set
> > # CONFIG_SENSORS_DS620 is not set
> > # CONFIG_SENSORS_DS1621 is not set
> > # CONFIG_SENSORS_I5K_AMB is not set
> > # CONFIG_SENSORS_F71805F is not set
> > # CONFIG_SENSORS_F71882FG is not set
> > # CONFIG_SENSORS_F75375S is not set
> > # CONFIG_SENSORS_FSCHMD is not set
> > # CONFIG_SENSORS_G760A is not set
> > # CONFIG_SENSORS_GL518SM is not set
> > # CONFIG_SENSORS_GL520SM is not set
> > # CONFIG_SENSORS_HIH6130 is not set
> > CONFIG_SENSORS_CORETEMP=m
> > # CONFIG_SENSORS_IT87 is not set
> > # CONFIG_SENSORS_JC42 is not set
> > # CONFIG_SENSORS_LINEAGE is not set
> > # CONFIG_SENSORS_LM63 is not set
> > # CONFIG_SENSORS_LM73 is not set
> > # CONFIG_SENSORS_LM75 is not set
> > # CONFIG_SENSORS_LM77 is not set
> > # CONFIG_SENSORS_LM78 is not set
> > # CONFIG_SENSORS_LM80 is not set
> > # CONFIG_SENSORS_LM83 is not set
> > # CONFIG_SENSORS_LM85 is not set
> > # CONFIG_SENSORS_LM87 is not set
> > # CONFIG_SENSORS_LM90 is not set
> > # CONFIG_SENSORS_LM92 is not set
> > # CONFIG_SENSORS_LM93 is not set
> > # CONFIG_SENSORS_LTC4151 is not set
> > # CONFIG_SENSORS_LTC4215 is not set
> > # CONFIG_SENSORS_LTC4245 is not set
> > # CONFIG_SENSORS_LTC4261 is not set
> > # CONFIG_SENSORS_LM95234 is not set
> > # CONFIG_SENSORS_LM95241 is not set
> > # CONFIG_SENSORS_LM95245 is not set
> > # CONFIG_SENSORS_MAX16065 is not set
> > # CONFIG_SENSORS_MAX1619 is not set
> > # CONFIG_SENSORS_MAX1668 is not set
> > # CONFIG_SENSORS_MAX197 is not set
> > # CONFIG_SENSORS_MAX6639 is not set
> > # CONFIG_SENSORS_MAX6642 is not set
> > # CONFIG_SENSORS_MAX6650 is not set
> > # CONFIG_SENSORS_MAX6697 is not set
> > # CONFIG_SENSORS_MCP3021 is not set
> > # CONFIG_SENSORS_NCT6775 is not set
> > # CONFIG_SENSORS_NTC_THERMISTOR is not set
> > # CONFIG_SENSORS_PC87360 is not set
> > # CONFIG_SENSORS_PC87427 is not set
> > # CONFIG_SENSORS_PCF8591 is not set
> > # CONFIG_PMBUS is not set
> > # CONFIG_SENSORS_SHT21 is not set
> > # CONFIG_SENSORS_SIS5595 is not set
> > # CONFIG_SENSORS_SMM665 is not set
> > # CONFIG_SENSORS_DME1737 is not set
> > # CONFIG_SENSORS_EMC1403 is not set
> > # CONFIG_SENSORS_EMC2103 is not set
> > # CONFIG_SENSORS_EMC6W201 is not set
> > # CONFIG_SENSORS_SMSC47M1 is not set
> > # CONFIG_SENSORS_SMSC47M192 is not set
> > # CONFIG_SENSORS_SMSC47B397 is not set
> > # CONFIG_SENSORS_SCH56XX_COMMON is not set
> > # CONFIG_SENSORS_ADS1015 is not set
> > # CONFIG_SENSORS_ADS7828 is not set
> > # CONFIG_SENSORS_AMC6821 is not set
> > # CONFIG_SENSORS_INA209 is not set
> > # CONFIG_SENSORS_INA2XX is not set
> > # CONFIG_SENSORS_THMC50 is not set
> > # CONFIG_SENSORS_TMP102 is not set
> > # CONFIG_SENSORS_TMP401 is not set
> > # CONFIG_SENSORS_TMP421 is not set
> > # CONFIG_SENSORS_VIA_CPUTEMP is not set
> > # CONFIG_SENSORS_VIA686A is not set
> > # CONFIG_SENSORS_VT1211 is not set
> > # CONFIG_SENSORS_VT8231 is not set
> > # CONFIG_SENSORS_W83781D is not set
> > # CONFIG_SENSORS_W83791D is not set
> > # CONFIG_SENSORS_W83792D is not set
> > # CONFIG_SENSORS_W83793 is not set
> > # CONFIG_SENSORS_W83795 is not set
> > # CONFIG_SENSORS_W83L785TS is not set
> > # CONFIG_SENSORS_W83L786NG is not set
> > # CONFIG_SENSORS_W83627HF is not set
> > # CONFIG_SENSORS_W83627EHF is not set
> > # CONFIG_SENSORS_APPLESMC is not set
> >
> > #
> > # ACPI drivers
> > #
> > # CONFIG_SENSORS_ACPI_POWER is not set
> > # CONFIG_SENSORS_ATK0110 is not set
> > CONFIG_THERMAL=y
> > CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
> > # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
> > # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
> > # CONFIG_THERMAL_GOV_FAIR_SHARE is not set
> > CONFIG_THERMAL_GOV_STEP_WISE=y
> > # CONFIG_THERMAL_GOV_USER_SPACE is not set
> > # CONFIG_CPU_THERMAL is not set
> > # CONFIG_THERMAL_EMULATION is not set
> > # CONFIG_INTEL_POWERCLAMP is not set
> > # CONFIG_WATCHDOG is not set
> > CONFIG_SSB_POSSIBLE=y
> >
> > #
> > # Sonics Silicon Backplane
> > #
> > # CONFIG_SSB is not set
> > CONFIG_BCMA_POSSIBLE=y
> >
> > #
> > # Broadcom specific AMBA
> > #
> > # CONFIG_BCMA is not set
> >
> > #
> > # Multifunction device drivers
> > #
> > # CONFIG_MFD_CORE is not set
> > # CONFIG_MFD_CS5535 is not set
> > # CONFIG_MFD_CROS_EC is not set
> > # CONFIG_MFD_MC13XXX_I2C is not set
> > # CONFIG_HTC_PASIC3 is not set
> > # CONFIG_LPC_ICH is not set
> > # CONFIG_LPC_SCH is not set
> > # CONFIG_MFD_JANZ_CMODIO is not set
> > # CONFIG_MFD_VIPERBOARD is not set
> > # CONFIG_MFD_RETU is not set
> > # CONFIG_MFD_PCF50633 is not set
> > # CONFIG_MFD_RDC321X is not set
> > # CONFIG_MFD_RTSX_PCI is not set
> > # CONFIG_MFD_SI476X_CORE is not set
> > # CONFIG_MFD_SM501 is not set
> > # CONFIG_ABX500_CORE is not set
> > # CONFIG_MFD_SYSCON is not set
> > # CONFIG_MFD_TI_AM335X_TSCADC is not set
> > # CONFIG_TPS6105X is not set
> > # CONFIG_TPS6507X is not set
> > # CONFIG_MFD_TPS65217 is not set
> > # CONFIG_MFD_WL1273_CORE is not set
> > # CONFIG_MFD_LM3533 is not set
> > # CONFIG_MFD_TMIO is not set
> > # CONFIG_MFD_VX855 is not set
> > # CONFIG_MFD_ARIZONA_I2C is not set
> > # CONFIG_REGULATOR is not set
> > CONFIG_MEDIA_SUPPORT=m
> >
> > #
> > # Multimedia core support
> > #
> > CONFIG_MEDIA_CAMERA_SUPPORT=y
> > # CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
> > # CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
> > # CONFIG_MEDIA_RADIO_SUPPORT is not set
> > # CONFIG_MEDIA_RC_SUPPORT is not set
> > CONFIG_MEDIA_CONTROLLER=y
> > CONFIG_VIDEO_DEV=m
> > CONFIG_VIDEO_V4L2_SUBDEV_API=y
> > CONFIG_VIDEO_V4L2=m
> > # CONFIG_VIDEO_ADV_DEBUG is not set
> > # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
> > CONFIG_VIDEOBUF2_CORE=m
> > CONFIG_VIDEOBUF2_MEMOPS=m
> > CONFIG_VIDEOBUF2_VMALLOC=m
> > # CONFIG_VIDEO_V4L2_INT_DEVICE is not set
> > # CONFIG_TTPCI_EEPROM is not set
> >
> > #
> > # Media drivers
> > #
> > CONFIG_MEDIA_USB_SUPPORT=y
> >
> > #
> > # Webcam devices
> > #
> > CONFIG_USB_VIDEO_CLASS=m
> > CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
> > # CONFIG_USB_GSPCA is not set
> > # CONFIG_USB_PWC is not set
> > # CONFIG_VIDEO_CPIA2 is not set
> > # CONFIG_USB_ZR364XX is not set
> > # CONFIG_USB_STKWEBCAM is not set
> > # CONFIG_USB_S2255 is not set
> > # CONFIG_USB_SN9C102 is not set
> >
> > #
> > # Webcam, TV (analog/digital) USB devices
> > #
> > # CONFIG_VIDEO_EM28XX is not set
> > # CONFIG_MEDIA_PCI_SUPPORT is not set
> > # CONFIG_V4L_PLATFORM_DRIVERS is not set
> > # CONFIG_V4L_MEM2MEM_DRIVERS is not set
> > # CONFIG_V4L_TEST_DRIVERS is not set
> >
> > #
> > # Supported MMC/SDIO adapters
> > #
> > # CONFIG_CYPRESS_FIRMWARE is not set
> >
> > #
> > # Media ancillary drivers (tuners, sensors, i2c, frontends)
> > #
> > CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
> >
> > #
> > # Audio decoders, processors and mixers
> > #
> >
> > #
> > # RDS decoders
> > #
> >
> > #
> > # Video decoders
> > #
> >
> > #
> > # Video and audio decoders
> > #
> >
> > #
> > # Video encoders
> > #
> >
> > #
> > # Camera sensor devices
> > #
> >
> > #
> > # Flash devices
> > #
> >
> > #
> > # Video improvement chips
> > #
> >
> > #
> > # Miscelaneous helper chips
> > #
> >
> > #
> > # Sensors used on soc_camera driver
> > #
> >
> > #
> > # Tools to develop new frontends
> > #
> > # CONFIG_DVB_DUMMY_FE is not set
> >
> > #
> > # Graphics support
> > #
> > CONFIG_AGP=y
> > CONFIG_AGP_AMD64=y
> > CONFIG_AGP_INTEL=y
> > # CONFIG_AGP_SIS is not set
> > # CONFIG_AGP_VIA is not set
> > CONFIG_VGA_ARB=y
> > CONFIG_VGA_ARB_MAX_GPUS=16
> > # CONFIG_VGA_SWITCHEROO is not set
> > CONFIG_DRM=m
> > CONFIG_DRM_KMS_HELPER=m
> > # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
> >
> > #
> > # I2C encoder or helper chips
> > #
> > # CONFIG_DRM_I2C_CH7006 is not set
> > # CONFIG_DRM_I2C_SIL164 is not set
> > # CONFIG_DRM_I2C_NXP_TDA998X is not set
> > # CONFIG_DRM_TDFX is not set
> > # CONFIG_DRM_R128 is not set
> > # CONFIG_DRM_RADEON is not set
> > # CONFIG_DRM_NOUVEAU is not set
> > CONFIG_DRM_I915=m
> > # CONFIG_DRM_I915_KMS is not set
> > # CONFIG_DRM_MGA is not set
> > # CONFIG_DRM_SIS is not set
> > # CONFIG_DRM_VIA is not set
> > # CONFIG_DRM_SAVAGE is not set
> > # CONFIG_DRM_VMWGFX is not set
> > # CONFIG_DRM_GMA500 is not set
> > # CONFIG_DRM_UDL is not set
> > # CONFIG_DRM_AST is not set
> > # CONFIG_DRM_MGAG200 is not set
> > # CONFIG_DRM_CIRRUS_QEMU is not set
> > # CONFIG_DRM_QXL is not set
> > # CONFIG_VGASTATE is not set
> > CONFIG_VIDEO_OUTPUT_CONTROL=m
> > CONFIG_HDMI=y
> > CONFIG_FB=m
> > # CONFIG_FIRMWARE_EDID is not set
> > # CONFIG_FB_DDC is not set
> > # CONFIG_FB_BOOT_VESA_SUPPORT is not set
> > CONFIG_FB_CFB_FILLRECT=m
> > CONFIG_FB_CFB_COPYAREA=m
> > CONFIG_FB_CFB_IMAGEBLIT=m
> > # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> > # CONFIG_FB_SYS_FILLRECT is not set
> > # CONFIG_FB_SYS_COPYAREA is not set
> > # CONFIG_FB_SYS_IMAGEBLIT is not set
> > # CONFIG_FB_FOREIGN_ENDIAN is not set
> > # CONFIG_FB_SYS_FOPS is not set
> > # CONFIG_FB_SVGALIB is not set
> > # CONFIG_FB_MACMODES is not set
> > # CONFIG_FB_BACKLIGHT is not set
> > CONFIG_FB_MODE_HELPERS=y
> > # CONFIG_FB_TILEBLITTING is not set
> >
> > #
> > # Frame buffer hardware drivers
> > #
> > # CONFIG_FB_CIRRUS is not set
> > # CONFIG_FB_PM2 is not set
> > # CONFIG_FB_CYBER2000 is not set
> > # CONFIG_FB_ARC is not set
> > # CONFIG_FB_VGA16 is not set
> > # CONFIG_FB_UVESA is not set
> > # CONFIG_FB_N411 is not set
> > # CONFIG_FB_HGA is not set
> > # CONFIG_FB_S1D13XXX is not set
> > # CONFIG_FB_NVIDIA is not set
> > # CONFIG_FB_RIVA is not set
> > # CONFIG_FB_I740 is not set
> > # CONFIG_FB_LE80578 is not set
> > # CONFIG_FB_MATROX is not set
> > # CONFIG_FB_RADEON is not set
> > # CONFIG_FB_ATY128 is not set
> > # CONFIG_FB_ATY is not set
> > # CONFIG_FB_S3 is not set
> > # CONFIG_FB_SAVAGE is not set
> > # CONFIG_FB_SIS is not set
> > # CONFIG_FB_VIA is not set
> > # CONFIG_FB_NEOMAGIC is not set
> > # CONFIG_FB_KYRO is not set
> > # CONFIG_FB_3DFX is not set
> > # CONFIG_FB_VOODOO1 is not set
> > # CONFIG_FB_VT8623 is not set
> > # CONFIG_FB_TRIDENT is not set
> > # CONFIG_FB_ARK is not set
> > # CONFIG_FB_PM3 is not set
> > # CONFIG_FB_CARMINE is not set
> > # CONFIG_FB_GEODE is not set
> > # CONFIG_FB_SMSCUFX is not set
> > # CONFIG_FB_UDL is not set
> > # CONFIG_FB_GOLDFISH is not set
> > # CONFIG_FB_VIRTUAL is not set
> > # CONFIG_FB_METRONOME is not set
> > # CONFIG_FB_MB862XX is not set
> > # CONFIG_FB_BROADSHEET is not set
> > # CONFIG_FB_AUO_K190X is not set
> > # CONFIG_EXYNOS_VIDEO is not set
> > CONFIG_BACKLIGHT_LCD_SUPPORT=y
> > CONFIG_LCD_CLASS_DEVICE=m
> > # CONFIG_LCD_PLATFORM is not set
> > CONFIG_BACKLIGHT_CLASS_DEVICE=m
> > CONFIG_BACKLIGHT_GENERIC=m
> > # CONFIG_BACKLIGHT_APPLE is not set
> > # CONFIG_BACKLIGHT_SAHARA is not set
> > # CONFIG_BACKLIGHT_ADP8860 is not set
> > # CONFIG_BACKLIGHT_ADP8870 is not set
> > # CONFIG_BACKLIGHT_LM3630 is not set
> > # CONFIG_BACKLIGHT_LM3639 is not set
> > # CONFIG_BACKLIGHT_LP855X is not set
> >
> > #
> > # Console display driver support
> > #
> > CONFIG_VGA_CONSOLE=y
> > CONFIG_VGACON_SOFT_SCROLLBACK=y
> > CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
> > CONFIG_DUMMY_CONSOLE=y
> > CONFIG_FRAMEBUFFER_CONSOLE=m
> > CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> > # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
> > # CONFIG_FONTS is not set
> > CONFIG_FONT_8x8=y
> > CONFIG_FONT_8x16=y
> > # CONFIG_LOGO is not set
> > CONFIG_SOUND=y
> > CONFIG_SOUND_OSS_CORE=y
> > CONFIG_SOUND_OSS_CORE_PRECLAIM=y
> > CONFIG_SND=m
> > CONFIG_SND_TIMER=m
> > CONFIG_SND_PCM=m
> > CONFIG_SND_JACK=y
> > CONFIG_SND_SEQUENCER=m
> > # CONFIG_SND_SEQ_DUMMY is not set
> > CONFIG_SND_OSSEMUL=y
> > CONFIG_SND_MIXER_OSS=m
> > CONFIG_SND_PCM_OSS=m
> > CONFIG_SND_PCM_OSS_PLUGINS=y
> > CONFIG_SND_SEQUENCER_OSS=y
> > CONFIG_SND_HRTIMER=m
> > CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
> > CONFIG_SND_DYNAMIC_MINORS=y
> > CONFIG_SND_SUPPORT_OLD_API=y
> > CONFIG_SND_VERBOSE_PROCFS=y
> > # CONFIG_SND_VERBOSE_PRINTK is not set
> > # CONFIG_SND_DEBUG is not set
> > CONFIG_SND_VMASTER=y
> > CONFIG_SND_KCTL_JACK=y
> > CONFIG_SND_DMA_SGBUF=y
> > # CONFIG_SND_RAWMIDI_SEQ is not set
> > # CONFIG_SND_OPL3_LIB_SEQ is not set
> > # CONFIG_SND_OPL4_LIB_SEQ is not set
> > # CONFIG_SND_SBAWE_SEQ is not set
> > # CONFIG_SND_EMU10K1_SEQ is not set
> > CONFIG_SND_DRIVERS=y
> > # CONFIG_SND_PCSP is not set
> > # CONFIG_SND_DUMMY is not set
> > # CONFIG_SND_ALOOP is not set
> > # CONFIG_SND_VIRMIDI is not set
> > # CONFIG_SND_MTPAV is not set
> > # CONFIG_SND_SERIAL_U16550 is not set
> > # CONFIG_SND_MPU401 is not set
> > CONFIG_SND_PCI=y
> > # CONFIG_SND_AD1889 is not set
> > # CONFIG_SND_ALS300 is not set
> > # CONFIG_SND_ALS4000 is not set
> > # CONFIG_SND_ALI5451 is not set
> > # CONFIG_SND_ASIHPI is not set
> > # CONFIG_SND_ATIIXP is not set
> > # CONFIG_SND_ATIIXP_MODEM is not set
> > # CONFIG_SND_AU8810 is not set
> > # CONFIG_SND_AU8820 is not set
> > # CONFIG_SND_AU8830 is not set
> > # CONFIG_SND_AW2 is not set
> > # CONFIG_SND_AZT3328 is not set
> > # CONFIG_SND_BT87X is not set
> > # CONFIG_SND_CA0106 is not set
> > # CONFIG_SND_CMIPCI is not set
> > # CONFIG_SND_OXYGEN is not set
> > # CONFIG_SND_CS4281 is not set
> > # CONFIG_SND_CS46XX is not set
> > # CONFIG_SND_CS5530 is not set
> > # CONFIG_SND_CS5535AUDIO is not set
> > # CONFIG_SND_CTXFI is not set
> > # CONFIG_SND_DARLA20 is not set
> > # CONFIG_SND_GINA20 is not set
> > # CONFIG_SND_LAYLA20 is not set
> > # CONFIG_SND_DARLA24 is not set
> > # CONFIG_SND_GINA24 is not set
> > # CONFIG_SND_LAYLA24 is not set
> > # CONFIG_SND_MONA is not set
> > # CONFIG_SND_MIA is not set
> > # CONFIG_SND_ECHO3G is not set
> > # CONFIG_SND_INDIGO is not set
> > # CONFIG_SND_INDIGOIO is not set
> > # CONFIG_SND_INDIGODJ is not set
> > # CONFIG_SND_INDIGOIOX is not set
> > # CONFIG_SND_INDIGODJX is not set
> > # CONFIG_SND_EMU10K1 is not set
> > # CONFIG_SND_EMU10K1X is not set
> > # CONFIG_SND_ENS1370 is not set
> > # CONFIG_SND_ENS1371 is not set
> > # CONFIG_SND_ES1938 is not set
> > # CONFIG_SND_ES1968 is not set
> > # CONFIG_SND_FM801 is not set
> > CONFIG_SND_HDA_INTEL=m
> > CONFIG_SND_HDA_PREALLOC_SIZE=64
> > # CONFIG_SND_HDA_HWDEP is not set
> > # CONFIG_SND_HDA_INPUT_BEEP is not set
> > CONFIG_SND_HDA_INPUT_JACK=y
> > # CONFIG_SND_HDA_PATCH_LOADER is not set
> > CONFIG_SND_HDA_CODEC_REALTEK=y
> > CONFIG_SND_HDA_CODEC_ANALOG=y
> > CONFIG_SND_HDA_CODEC_SIGMATEL=y
> > CONFIG_SND_HDA_CODEC_VIA=y
> > CONFIG_SND_HDA_CODEC_HDMI=y
> > CONFIG_SND_HDA_CODEC_CIRRUS=y
> > CONFIG_SND_HDA_CODEC_CONEXANT=y
> > CONFIG_SND_HDA_CODEC_CA0110=y
> > CONFIG_SND_HDA_CODEC_CA0132=y
> > # CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
> > CONFIG_SND_HDA_CODEC_CMEDIA=y
> > CONFIG_SND_HDA_CODEC_SI3054=y
> > CONFIG_SND_HDA_GENERIC=y
> > CONFIG_SND_HDA_POWER_SAVE_DEFAULT=60
> > # CONFIG_SND_HDSP is not set
> > # CONFIG_SND_HDSPM is not set
> > # CONFIG_SND_ICE1712 is not set
> > # CONFIG_SND_ICE1724 is not set
> > # CONFIG_SND_INTEL8X0 is not set
> > # CONFIG_SND_INTEL8X0M is not set
> > # CONFIG_SND_KORG1212 is not set
> > # CONFIG_SND_LOLA is not set
> > # CONFIG_SND_LX6464ES is not set
> > # CONFIG_SND_MAESTRO3 is not set
> > # CONFIG_SND_MIXART is not set
> > # CONFIG_SND_NM256 is not set
> > # CONFIG_SND_PCXHR is not set
> > # CONFIG_SND_RIPTIDE is not set
> > # CONFIG_SND_RME32 is not set
> > # CONFIG_SND_RME96 is not set
> > # CONFIG_SND_RME9652 is not set
> > # CONFIG_SND_SONICVIBES is not set
> > # CONFIG_SND_TRIDENT is not set
> > # CONFIG_SND_VIA82XX is not set
> > # CONFIG_SND_VIA82XX_MODEM is not set
> > # CONFIG_SND_VIRTUOSO is not set
> > # CONFIG_SND_VX222 is not set
> > # CONFIG_SND_YMFPCI is not set
> > # CONFIG_SND_USB is not set
> > # CONFIG_SND_SOC is not set
> > CONFIG_SOUND_PRIME=y
> > # CONFIG_SOUND_OSS is not set
> >
> > #
> > # HID support
> > #
> > CONFIG_HID=y
> > # CONFIG_HID_BATTERY_STRENGTH is not set
> > CONFIG_HIDRAW=y
> > # CONFIG_UHID is not set
> > CONFIG_HID_GENERIC=y
> >
> > #
> > # Special HID drivers
> > #
> > CONFIG_HID_A4TECH=y
> > # CONFIG_HID_ACRUX is not set
> > CONFIG_HID_APPLE=y
> > # CONFIG_HID_APPLEIR is not set
> > # CONFIG_HID_AUREAL is not set
> > CONFIG_HID_BELKIN=y
> > CONFIG_HID_CHERRY=y
> > CONFIG_HID_CHICONY=y
> > # CONFIG_HID_PRODIKEYS is not set
> > CONFIG_HID_CYPRESS=y
> > CONFIG_HID_DRAGONRISE=y
> > # CONFIG_DRAGONRISE_FF is not set
> > # CONFIG_HID_EMS_FF is not set
> > # CONFIG_HID_ELECOM is not set
> > CONFIG_HID_EZKEY=y
> > # CONFIG_HID_HOLTEK is not set
> > # CONFIG_HID_KEYTOUCH is not set
> > CONFIG_HID_KYE=y
> > # CONFIG_HID_UCLOGIC is not set
> > # CONFIG_HID_WALTOP is not set
> > CONFIG_HID_GYRATION=y
> > # CONFIG_HID_ICADE is not set
> > CONFIG_HID_TWINHAN=y
> > CONFIG_HID_KENSINGTON=y
> > # CONFIG_HID_LCPOWER is not set
> > # CONFIG_HID_LENOVO_TPKBD is not set
> > CONFIG_HID_LOGITECH=y
> > CONFIG_HID_LOGITECH_DJ=m
> > # CONFIG_LOGITECH_FF is not set
> > # CONFIG_LOGIRUMBLEPAD2_FF is not set
> > # CONFIG_LOGIG940_FF is not set
> > # CONFIG_LOGIWHEELS_FF is not set
> > # CONFIG_HID_MAGICMOUSE is not set
> > CONFIG_HID_MICROSOFT=y
> > CONFIG_HID_MONTEREY=y
> > # CONFIG_HID_MULTITOUCH is not set
> > CONFIG_HID_NTRIG=y
> > CONFIG_HID_ORTEK=y
> > CONFIG_HID_PANTHERLORD=y
> > # CONFIG_PANTHERLORD_FF is not set
> > CONFIG_HID_PETALYNX=y
> > # CONFIG_HID_PICOLCD is not set
> > # CONFIG_HID_PRIMAX is not set
> > # CONFIG_HID_PS3REMOTE is not set
> > # CONFIG_HID_ROCCAT is not set
> > # CONFIG_HID_SAITEK is not set
> > CONFIG_HID_SAMSUNG=y
> > CONFIG_HID_SONY=y
> > # CONFIG_HID_SPEEDLINK is not set
> > # CONFIG_HID_STEELSERIES is not set
> > CONFIG_HID_SUNPLUS=y
> > CONFIG_HID_GREENASIA=y
> > # CONFIG_GREENASIA_FF is not set
> > CONFIG_HID_SMARTJOYPLUS=y
> > # CONFIG_SMARTJOYPLUS_FF is not set
> > # CONFIG_HID_TIVO is not set
> > CONFIG_HID_TOPSEED=y
> > # CONFIG_HID_THINGM is not set
> > CONFIG_HID_THRUSTMASTER=y
> > # CONFIG_THRUSTMASTER_FF is not set
> > # CONFIG_HID_WACOM is not set
> > # CONFIG_HID_WIIMOTE is not set
> > CONFIG_HID_ZEROPLUS=y
> > # CONFIG_ZEROPLUS_FF is not set
> > # CONFIG_HID_ZYDACRON is not set
> > # CONFIG_HID_SENSOR_HUB is not set
> >
> > #
> > # USB HID support
> > #
> > CONFIG_USB_HID=y
> > # CONFIG_HID_PID is not set
> > CONFIG_USB_HIDDEV=y
> >
> > #
> > # I2C HID support
> > #
> > # CONFIG_I2C_HID is not set
> > CONFIG_USB_ARCH_HAS_OHCI=y
> > CONFIG_USB_ARCH_HAS_EHCI=y
> > CONFIG_USB_ARCH_HAS_XHCI=y
> > CONFIG_USB_SUPPORT=y
> > CONFIG_USB_COMMON=y
> > CONFIG_USB_ARCH_HAS_HCD=y
> > CONFIG_USB=y
> > # CONFIG_USB_DEBUG is not set
> > CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> >
> > #
> > # Miscellaneous USB options
> > #
> > CONFIG_USB_DEFAULT_PERSIST=y
> > # CONFIG_USB_DYNAMIC_MINORS is not set
> > CONFIG_USB_MON=y
> > # CONFIG_USB_WUSB_CBAF is not set
> >
> > #
> > # USB Host Controller Drivers
> > #
> > # CONFIG_USB_C67X00_HCD is not set
> > # CONFIG_USB_XHCI_HCD is not set
> > CONFIG_USB_EHCI_HCD=y
> > # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> > # CONFIG_USB_EHCI_TT_NEWSCHED is not set
> > CONFIG_USB_EHCI_PCI=y
> > # CONFIG_USB_EHCI_HCD_PLATFORM is not set
> > # CONFIG_USB_OXU210HP_HCD is not set
> > # CONFIG_USB_ISP116X_HCD is not set
> > # CONFIG_USB_ISP1760_HCD is not set
> > # CONFIG_USB_ISP1362_HCD is not set
> > CONFIG_USB_OHCI_HCD=y
> > # CONFIG_USB_OHCI_HCD_PLATFORM is not set
> > # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> > # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> > CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> > CONFIG_USB_UHCI_HCD=y
> > # CONFIG_USB_SL811_HCD is not set
> > # CONFIG_USB_R8A66597_HCD is not set
> >
> > #
> > # USB Device Class drivers
> > #
> > CONFIG_USB_ACM=m
> > # CONFIG_USB_PRINTER is not set
> > # CONFIG_USB_WDM is not set
> > # CONFIG_USB_TMC is not set
> >
> > #
> > # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> > #
> >
> > #
> > # also be needed; see USB_STORAGE Help for more info
> > #
> > CONFIG_USB_STORAGE=y
> > # CONFIG_USB_STORAGE_DEBUG is not set
> > # CONFIG_USB_STORAGE_REALTEK is not set
> > CONFIG_USB_STORAGE_DATAFAB=y
> > CONFIG_USB_STORAGE_FREECOM=y
> > CONFIG_USB_STORAGE_ISD200=y
> > CONFIG_USB_STORAGE_USBAT=y
> > CONFIG_USB_STORAGE_SDDR09=y
> > CONFIG_USB_STORAGE_SDDR55=y
> > CONFIG_USB_STORAGE_JUMPSHOT=y
> > CONFIG_USB_STORAGE_ALAUDA=y
> > # CONFIG_USB_STORAGE_ONETOUCH is not set
> > CONFIG_USB_STORAGE_KARMA=y
> > # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> > # CONFIG_USB_STORAGE_ENE_UB6250 is not set
> >
> > #
> > # USB Imaging devices
> > #
> > # CONFIG_USB_MDC800 is not set
> > # CONFIG_USB_MICROTEK is not set
> > # CONFIG_USB_DWC3 is not set
> > # CONFIG_USB_CHIPIDEA is not set
> >
> > #
> > # USB port drivers
> > #
> > # CONFIG_USB_SERIAL is not set
> >
> > #
> > # USB Miscellaneous drivers
> > #
> > # CONFIG_USB_EMI62 is not set
> > # CONFIG_USB_EMI26 is not set
> > # CONFIG_USB_ADUTUX is not set
> > # CONFIG_USB_SEVSEG is not set
> > # CONFIG_USB_RIO500 is not set
> > # CONFIG_USB_LEGOTOWER is not set
> > # CONFIG_USB_LCD is not set
> > # CONFIG_USB_LED is not set
> > # CONFIG_USB_CYPRESS_CY7C63 is not set
> > # CONFIG_USB_CYTHERM is not set
> > # CONFIG_USB_IDMOUSE is not set
> > # CONFIG_USB_FTDI_ELAN is not set
> > # CONFIG_USB_APPLEDISPLAY is not set
> > # CONFIG_USB_SISUSBVGA is not set
> > # CONFIG_USB_LD is not set
> > # CONFIG_USB_TRANCEVIBRATOR is not set
> > # CONFIG_USB_IOWARRIOR is not set
> > # CONFIG_USB_TEST is not set
> > # CONFIG_USB_ISIGHTFW is not set
> > # CONFIG_USB_YUREX is not set
> > # CONFIG_USB_EZUSB_FX2 is not set
> > # CONFIG_USB_HSIC_USB3503 is not set
> > # CONFIG_USB_PHY is not set
> > # CONFIG_USB_GADGET is not set
> > # CONFIG_UWB is not set
> > CONFIG_MMC=m
> > # CONFIG_MMC_DEBUG is not set
> > # CONFIG_MMC_UNSAFE_RESUME is not set
> > # CONFIG_MMC_CLKGATE is not set
> >
> > #
> > # MMC/SD/SDIO Card Drivers
> > #
> > CONFIG_MMC_BLOCK=m
> > CONFIG_MMC_BLOCK_MINORS=8
> > CONFIG_MMC_BLOCK_BOUNCE=y
> > # CONFIG_SDIO_UART is not set
> > # CONFIG_MMC_TEST is not set
> >
> > #
> > # MMC/SD/SDIO Host Controller Drivers
> > #
> > CONFIG_MMC_SDHCI=m
> > CONFIG_MMC_SDHCI_PCI=m
> > # CONFIG_MMC_RICOH_MMC is not set
> > # CONFIG_MMC_SDHCI_ACPI is not set
> > CONFIG_MMC_SDHCI_PLTFM=m
> > CONFIG_MMC_WBSD=m
> > CONFIG_MMC_TIFM_SD=m
> > CONFIG_MMC_CB710=m
> > # CONFIG_MMC_VIA_SDMMC is not set
> > CONFIG_MMC_VUB300=m
> > CONFIG_MMC_USHC=m
> > # CONFIG_MEMSTICK is not set
> > CONFIG_NEW_LEDS=y
> > CONFIG_LEDS_CLASS=y
> >
> > #
> > # LED drivers
> > #
> > # CONFIG_LEDS_LM3530 is not set
> > # CONFIG_LEDS_LM3642 is not set
> > # CONFIG_LEDS_PCA9532 is not set
> > # CONFIG_LEDS_LP3944 is not set
> > # CONFIG_LEDS_LP5521 is not set
> > # CONFIG_LEDS_LP5523 is not set
> > # CONFIG_LEDS_LP5562 is not set
> > # CONFIG_LEDS_CLEVO_MAIL is not set
> > # CONFIG_LEDS_PCA955X is not set
> > # CONFIG_LEDS_PCA9633 is not set
> > # CONFIG_LEDS_BD2802 is not set
> > # CONFIG_LEDS_INTEL_SS4200 is not set
> > # CONFIG_LEDS_TCA6507 is not set
> > # CONFIG_LEDS_LM355x is not set
> > # CONFIG_LEDS_OT200 is not set
> > # CONFIG_LEDS_BLINKM is not set
> >
> > #
> > # LED Triggers
> > #
> > CONFIG_LEDS_TRIGGERS=y
> > # CONFIG_LEDS_TRIGGER_TIMER is not set
> > # CONFIG_LEDS_TRIGGER_ONESHOT is not set
> > # CONFIG_LEDS_TRIGGER_IDE_DISK is not set
> > # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
> > # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
> > # CONFIG_LEDS_TRIGGER_CPU is not set
> > # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
> >
> > #
> > # iptables trigger is under Netfilter config (LED target)
> > #
> > # CONFIG_LEDS_TRIGGER_TRANSIENT is not set
> > # CONFIG_LEDS_TRIGGER_CAMERA is not set
> > # CONFIG_ACCESSIBILITY is not set
> > # CONFIG_INFINIBAND is not set
> > # CONFIG_EDAC is not set
> > CONFIG_RTC_LIB=y
> > # CONFIG_RTC_CLASS is not set
> > CONFIG_DMADEVICES=y
> > # CONFIG_DMADEVICES_DEBUG is not set
> >
> > #
> > # DMA Devices
> > #
> > # CONFIG_INTEL_MID_DMAC is not set
> > # CONFIG_INTEL_IOATDMA is not set
> > # CONFIG_DW_DMAC is not set
> > # CONFIG_TIMB_DMA is not set
> > # CONFIG_PCH_DMA is not set
> > CONFIG_DMA_ACPI=y
> > # CONFIG_AUXDISPLAY is not set
> > # CONFIG_UIO is not set
> > # CONFIG_VIRT_DRIVERS is not set
> >
> > #
> > # Virtio drivers
> > #
> > # CONFIG_VIRTIO_PCI is not set
> > # CONFIG_VIRTIO_MMIO is not set
> >
> > #
> > # Microsoft Hyper-V guest support
> > #
> > # CONFIG_STAGING is not set
> > CONFIG_X86_PLATFORM_DEVICES=y
> > # CONFIG_ACERHDF is not set
> > # CONFIG_ASUS_LAPTOP is not set
> > # CONFIG_CHROMEOS_LAPTOP is not set
> > CONFIG_DELL_LAPTOP=m
> > # CONFIG_FUJITSU_LAPTOP is not set
> > # CONFIG_FUJITSU_TABLET is not set
> > # CONFIG_HP_ACCEL is not set
> > # CONFIG_PANASONIC_LAPTOP is not set
> > # CONFIG_THINKPAD_ACPI is not set
> > # CONFIG_SENSORS_HDAPS is not set
> > # CONFIG_INTEL_MENLOW is not set
> > # CONFIG_ACPI_WMI is not set
> > # CONFIG_TOPSTAR_LAPTOP is not set
> > # CONFIG_TOSHIBA_BT_RFKILL is not set
> > # CONFIG_ACPI_CMPC is not set
> > # CONFIG_INTEL_IPS is not set
> > # CONFIG_IBM_RTL is not set
> > # CONFIG_XO15_EBOOK is not set
> > # CONFIG_SAMSUNG_LAPTOP is not set
> > # CONFIG_SAMSUNG_Q10 is not set
> > # CONFIG_APPLE_GMUX is not set
> > # CONFIG_PVPANIC is not set
> >
> > #
> > # Hardware Spinlock drivers
> > #
> > CONFIG_CLKEVT_I8253=y
> > CONFIG_I8253_LOCK=y
> > CONFIG_CLKBLD_I8253=y
> > # CONFIG_MAILBOX is not set
> > CONFIG_IOMMU_SUPPORT=y
> > # CONFIG_AMD_IOMMU is not set
> > # CONFIG_INTEL_IOMMU is not set
> > # CONFIG_IRQ_REMAP is not set
> >
> > #
> > # Remoteproc drivers
> > #
> > # CONFIG_STE_MODEM_RPROC is not set
> >
> > #
> > # Rpmsg drivers
> > #
> > # CONFIG_PM_DEVFREQ is not set
> > # CONFIG_EXTCON is not set
> > # CONFIG_MEMORY is not set
> > # CONFIG_IIO is not set
> > # CONFIG_NTB is not set
> > # CONFIG_VME_BUS is not set
> > # CONFIG_PWM is not set
> > # CONFIG_IPACK_BUS is not set
> > # CONFIG_RESET_CONTROLLER is not set
> >
> > #
> > # Firmware Drivers
> > #
> > # CONFIG_EDD is not set
> > CONFIG_FIRMWARE_MEMMAP=y
> > # CONFIG_DELL_RBU is not set
> > CONFIG_DCDBAS=y
> > # CONFIG_DMIID is not set
> > # CONFIG_DMI_SYSFS is not set
> > # CONFIG_ISCSI_IBFT_FIND is not set
> > # CONFIG_GOOGLE_FIRMWARE is not set
> >
> > #
> > # File systems
> > #
> > CONFIG_DCACHE_WORD_ACCESS=y
> > CONFIG_EXT2_FS=y
> > CONFIG_EXT2_FS_XATTR=y
> > CONFIG_EXT2_FS_POSIX_ACL=y
> > # CONFIG_EXT2_FS_SECURITY is not set
> > # CONFIG_EXT2_FS_XIP is not set
> > CONFIG_EXT3_FS=y
> > # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
> > CONFIG_EXT3_FS_XATTR=y
> > CONFIG_EXT3_FS_POSIX_ACL=y
> > # CONFIG_EXT3_FS_SECURITY is not set
> > # CONFIG_EXT4_FS is not set
> > CONFIG_JBD=y
> > # CONFIG_JBD_DEBUG is not set
> > CONFIG_FS_MBCACHE=y
> > # CONFIG_REISERFS_FS is not set
> > # CONFIG_JFS_FS is not set
> > # CONFIG_XFS_FS is not set
> > # CONFIG_GFS2_FS is not set
> > # CONFIG_BTRFS_FS is not set
> > # CONFIG_NILFS2_FS is not set
> > CONFIG_FS_POSIX_ACL=y
> > CONFIG_FILE_LOCKING=y
> > CONFIG_FSNOTIFY=y
> > CONFIG_DNOTIFY=y
> > CONFIG_INOTIFY_USER=y
> > # CONFIG_FANOTIFY is not set
> > # CONFIG_QUOTA is not set
> > # CONFIG_QUOTACTL is not set
> > # CONFIG_AUTOFS4_FS is not set
> > CONFIG_FUSE_FS=m
> > # CONFIG_CUSE is not set
> > CONFIG_GENERIC_ACL=y
> >
> > #
> > # Caches
> > #
> > # CONFIG_FSCACHE is not set
> >
> > #
> > # CD-ROM/DVD Filesystems
> > #
> > CONFIG_ISO9660_FS=y
> > CONFIG_JOLIET=y
> > # CONFIG_ZISOFS is not set
> > CONFIG_UDF_FS=y
> > CONFIG_UDF_NLS=y
> >
> > #
> > # DOS/FAT/NT Filesystems
> > #
> > CONFIG_FAT_FS=y
> > CONFIG_MSDOS_FS=y
> > CONFIG_VFAT_FS=y
> > CONFIG_FAT_DEFAULT_CODEPAGE=437
> > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> > # CONFIG_NTFS_FS is not set
> >
> > #
> > # Pseudo filesystems
> > #
> > CONFIG_PROC_FS=y
> > CONFIG_PROC_KCORE=y
> > CONFIG_PROC_SYSCTL=y
> > CONFIG_PROC_PAGE_MONITOR=y
> > CONFIG_SYSFS=y
> > CONFIG_TMPFS=y
> > CONFIG_TMPFS_POSIX_ACL=y
> > CONFIG_TMPFS_XATTR=y
> > CONFIG_HUGETLBFS=y
> > CONFIG_HUGETLB_PAGE=y
> > # CONFIG_CONFIGFS_FS is not set
> > CONFIG_MISC_FILESYSTEMS=y
> > # CONFIG_ADFS_FS is not set
> > # CONFIG_AFFS_FS is not set
> > # CONFIG_ECRYPT_FS is not set
> > # CONFIG_HFS_FS is not set
> > # CONFIG_HFSPLUS_FS is not set
> > # CONFIG_BEFS_FS is not set
> > # CONFIG_BFS_FS is not set
> > # CONFIG_EFS_FS is not set
> > # CONFIG_LOGFS is not set
> > CONFIG_CRAMFS=m
> > # CONFIG_SQUASHFS is not set
> > # CONFIG_VXFS_FS is not set
> > # CONFIG_MINIX_FS is not set
> > # CONFIG_OMFS_FS is not set
> > # CONFIG_HPFS_FS is not set
> > # CONFIG_QNX4FS_FS is not set
> > # CONFIG_QNX6FS_FS is not set
> > # CONFIG_ROMFS_FS is not set
> > # CONFIG_PSTORE is not set
> > # CONFIG_SYSV_FS is not set
> > # CONFIG_UFS_FS is not set
> > # CONFIG_F2FS_FS is not set
> > CONFIG_NETWORK_FILESYSTEMS=y
> > CONFIG_NFS_FS=y
> > CONFIG_NFS_V2=y
> > CONFIG_NFS_V3=y
> > # CONFIG_NFS_V3_ACL is not set
> > CONFIG_NFS_V4=y
> > # CONFIG_NFS_SWAP is not set
> > # CONFIG_NFS_V4_1 is not set
> > # CONFIG_ROOT_NFS is not set
> > # CONFIG_NFS_USE_LEGACY_DNS is not set
> > CONFIG_NFS_USE_KERNEL_DNS=y
> > # CONFIG_NFSD is not set
> > CONFIG_LOCKD=y
> > CONFIG_LOCKD_V4=y
> > CONFIG_NFS_COMMON=y
> > CONFIG_SUNRPC=y
> > CONFIG_SUNRPC_GSS=y
> > CONFIG_RPCSEC_GSS_KRB5=m
> > # CONFIG_SUNRPC_DEBUG is not set
> > # CONFIG_CEPH_FS is not set
> > CONFIG_CIFS=m
> > # CONFIG_CIFS_STATS is not set
> > # CONFIG_CIFS_WEAK_PW_HASH is not set
> > # CONFIG_CIFS_UPCALL is not set
> > # CONFIG_CIFS_XATTR is not set
> > CONFIG_CIFS_DEBUG=y
> > # CONFIG_CIFS_DEBUG2 is not set
> > # CONFIG_CIFS_DFS_UPCALL is not set
> > # CONFIG_CIFS_SMB2 is not set
> > # CONFIG_NCP_FS is not set
> > # CONFIG_CODA_FS is not set
> > # CONFIG_AFS_FS is not set
> > CONFIG_NLS=y
> > CONFIG_NLS_DEFAULT="iso8859-1"
> > CONFIG_NLS_CODEPAGE_437=y
> > # CONFIG_NLS_CODEPAGE_737 is not set
> > # CONFIG_NLS_CODEPAGE_775 is not set
> > # CONFIG_NLS_CODEPAGE_850 is not set
> > # CONFIG_NLS_CODEPAGE_852 is not set
> > # CONFIG_NLS_CODEPAGE_855 is not set
> > # CONFIG_NLS_CODEPAGE_857 is not set
> > # CONFIG_NLS_CODEPAGE_860 is not set
> > # CONFIG_NLS_CODEPAGE_861 is not set
> > # CONFIG_NLS_CODEPAGE_862 is not set
> > # CONFIG_NLS_CODEPAGE_863 is not set
> > # CONFIG_NLS_CODEPAGE_864 is not set
> > # CONFIG_NLS_CODEPAGE_865 is not set
> > # CONFIG_NLS_CODEPAGE_866 is not set
> > # CONFIG_NLS_CODEPAGE_869 is not set
> > # CONFIG_NLS_CODEPAGE_936 is not set
> > # CONFIG_NLS_CODEPAGE_950 is not set
> > # CONFIG_NLS_CODEPAGE_932 is not set
> > # CONFIG_NLS_CODEPAGE_949 is not set
> > # CONFIG_NLS_CODEPAGE_874 is not set
> > # CONFIG_NLS_ISO8859_8 is not set
> > # CONFIG_NLS_CODEPAGE_1250 is not set
> > # CONFIG_NLS_CODEPAGE_1251 is not set
> > CONFIG_NLS_ASCII=y
> > CONFIG_NLS_ISO8859_1=y
> > # CONFIG_NLS_ISO8859_2 is not set
> > # CONFIG_NLS_ISO8859_3 is not set
> > # CONFIG_NLS_ISO8859_4 is not set
> > # CONFIG_NLS_ISO8859_5 is not set
> > # CONFIG_NLS_ISO8859_6 is not set
> > # CONFIG_NLS_ISO8859_7 is not set
> > # CONFIG_NLS_ISO8859_9 is not set
> > # CONFIG_NLS_ISO8859_13 is not set
> > # CONFIG_NLS_ISO8859_14 is not set
> > CONFIG_NLS_ISO8859_15=y
> > # CONFIG_NLS_KOI8_R is not set
> > # CONFIG_NLS_KOI8_U is not set
> > # CONFIG_NLS_MAC_ROMAN is not set
> > # CONFIG_NLS_MAC_CELTIC is not set
> > # CONFIG_NLS_MAC_CENTEURO is not set
> > # CONFIG_NLS_MAC_CROATIAN is not set
> > # CONFIG_NLS_MAC_CYRILLIC is not set
> > # CONFIG_NLS_MAC_GAELIC is not set
> > # CONFIG_NLS_MAC_GREEK is not set
> > # CONFIG_NLS_MAC_ICELAND is not set
> > # CONFIG_NLS_MAC_INUIT is not set
> > # CONFIG_NLS_MAC_ROMANIAN is not set
> > # CONFIG_NLS_MAC_TURKISH is not set
> > CONFIG_NLS_UTF8=y
> >
> > #
> > # Kernel hacking
> > #
> > CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> > CONFIG_PRINTK_TIME=y
> > CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
> > CONFIG_ENABLE_WARN_DEPRECATED=y
> > CONFIG_ENABLE_MUST_CHECK=y
> > CONFIG_FRAME_WARN=1024
> > CONFIG_MAGIC_SYSRQ=y
> > # CONFIG_STRIP_ASM_SYMS is not set
> > # CONFIG_READABLE_ASM is not set
> > CONFIG_UNUSED_SYMBOLS=y
> > CONFIG_DEBUG_FS=y
> > # CONFIG_HEADERS_CHECK is not set
> > # CONFIG_DEBUG_SECTION_MISMATCH is not set
> > CONFIG_DEBUG_KERNEL=y
> > # CONFIG_DEBUG_SHIRQ is not set
> > # CONFIG_LOCKUP_DETECTOR is not set
> > # CONFIG_PANIC_ON_OOPS is not set
> > CONFIG_PANIC_ON_OOPS_VALUE=0
> > CONFIG_DETECT_HUNG_TASK=y
> > CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
> > # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
> > CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
> > CONFIG_SCHED_DEBUG=y
> > CONFIG_SCHEDSTATS=y
> > CONFIG_TIMER_STATS=y
> > # CONFIG_DEBUG_OBJECTS is not set
> > # CONFIG_SLUB_DEBUG_ON is not set
> > # CONFIG_SLUB_STATS is not set
> > CONFIG_HAVE_DEBUG_KMEMLEAK=y
> > # CONFIG_DEBUG_KMEMLEAK is not set
> > CONFIG_DEBUG_PREEMPT=y
> > # CONFIG_DEBUG_RT_MUTEXES is not set
> > # CONFIG_RT_MUTEX_TESTER is not set
> > # CONFIG_DEBUG_SPINLOCK is not set
> > # CONFIG_DEBUG_MUTEXES is not set
> > # CONFIG_DEBUG_LOCK_ALLOC is not set
> > # CONFIG_PROVE_LOCKING is not set
> > # CONFIG_LOCK_STAT is not set
> > # CONFIG_DEBUG_ATOMIC_SLEEP is not set
> > # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> > CONFIG_STACKTRACE=y
> > # CONFIG_DEBUG_STACK_USAGE is not set
> > # CONFIG_DEBUG_KOBJECT is not set
> > CONFIG_DEBUG_BUGVERBOSE=y
> > CONFIG_DEBUG_INFO=y
> > # CONFIG_DEBUG_INFO_REDUCED is not set
> > CONFIG_DEBUG_VM=y
> > # CONFIG_DEBUG_VM_RB is not set
> > # CONFIG_DEBUG_VIRTUAL is not set
> > # CONFIG_DEBUG_WRITECOUNT is not set
> > CONFIG_DEBUG_MEMORY_INIT=y
> > CONFIG_DEBUG_LIST=y
> > # CONFIG_TEST_LIST_SORT is not set
> > # CONFIG_DEBUG_SG is not set
> > # CONFIG_DEBUG_NOTIFIERS is not set
> > # CONFIG_DEBUG_CREDENTIALS is not set
> > CONFIG_ARCH_WANT_FRAME_POINTERS=y
> > CONFIG_FRAME_POINTER=y
> > # CONFIG_BOOT_PRINTK_DELAY is not set
> >
> > #
> > # RCU Debugging
> > #
> > # CONFIG_PROVE_RCU_DELAY is not set
> > CONFIG_SPARSE_RCU_POINTER=y
> > # CONFIG_RCU_TORTURE_TEST is not set
> > CONFIG_RCU_CPU_STALL_TIMEOUT=60
> > CONFIG_RCU_CPU_STALL_VERBOSE=y
> > # CONFIG_RCU_CPU_STALL_INFO is not set
> > # CONFIG_RCU_TRACE is not set
> > # CONFIG_KPROBES_SANITY_TEST is not set
> > # CONFIG_BACKTRACE_SELF_TEST is not set
> > # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
> > # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
> > # CONFIG_DEBUG_PER_CPU_MAPS is not set
> > # CONFIG_LKDTM is not set
> > # CONFIG_NOTIFIER_ERROR_INJECTION is not set
> > # CONFIG_FAULT_INJECTION is not set
> > CONFIG_LATENCYTOP=y
> > CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
> > # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
> > CONFIG_DEBUG_PAGEALLOC=y
> > CONFIG_WANT_PAGE_DEBUG_FLAGS=y
> > CONFIG_PAGE_GUARD=y
> > CONFIG_USER_STACKTRACE_SUPPORT=y
> > CONFIG_NOP_TRACER=y
> > CONFIG_HAVE_FUNCTION_TRACER=y
> > CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> > CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
> > CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> > CONFIG_HAVE_DYNAMIC_FTRACE=y
> > CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
> > CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> > CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> > CONFIG_HAVE_FENTRY=y
> > CONFIG_HAVE_C_RECORDMCOUNT=y
> > CONFIG_TRACE_CLOCK=y
> > CONFIG_RING_BUFFER=y
> > CONFIG_EVENT_TRACING=y
> > CONFIG_CONTEXT_SWITCH_TRACER=y
> > CONFIG_RING_BUFFER_ALLOW_SWAP=y
> > CONFIG_TRACING=y
> > CONFIG_GENERIC_TRACER=y
> > CONFIG_TRACING_SUPPORT=y
> > CONFIG_FTRACE=y
> > CONFIG_FUNCTION_TRACER=y
> > CONFIG_FUNCTION_GRAPH_TRACER=y
> > # CONFIG_IRQSOFF_TRACER is not set
> > # CONFIG_PREEMPT_TRACER is not set
> > # CONFIG_SCHED_TRACER is not set
> > CONFIG_FTRACE_SYSCALLS=y
> > # CONFIG_TRACER_SNAPSHOT is not set
> > CONFIG_BRANCH_PROFILE_NONE=y
> > # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
> > # CONFIG_PROFILE_ALL_BRANCHES is not set
> > CONFIG_STACK_TRACER=y
> > # CONFIG_BLK_DEV_IO_TRACE is not set
> > CONFIG_KPROBE_EVENT=y
> > CONFIG_UPROBE_EVENT=y
> > CONFIG_PROBE_EVENTS=y
> > CONFIG_DYNAMIC_FTRACE=y
> > CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
> > # CONFIG_FUNCTION_PROFILER is not set
> > CONFIG_FTRACE_MCOUNT_RECORD=y
> > # CONFIG_FTRACE_STARTUP_TEST is not set
> > # CONFIG_MMIOTRACE is not set
> > # CONFIG_RING_BUFFER_BENCHMARK is not set
> > # CONFIG_RING_BUFFER_STARTUP_TEST is not set
> > # CONFIG_RBTREE_TEST is not set
> > # CONFIG_INTERVAL_TREE_TEST is not set
> > # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
> > # CONFIG_DYNAMIC_DEBUG is not set
> > # CONFIG_DMA_API_DEBUG is not set
> > # CONFIG_ATOMIC64_SELFTEST is not set
> > # CONFIG_SAMPLES is not set
> > CONFIG_HAVE_ARCH_KGDB=y
> > CONFIG_KGDB=y
> > CONFIG_KGDB_SERIAL_CONSOLE=y
> > # CONFIG_KGDB_TESTS is not set
> > # CONFIG_KGDB_LOW_LEVEL_TRAP is not set
> > # CONFIG_KGDB_KDB is not set
> > CONFIG_HAVE_ARCH_KMEMCHECK=y
> > # CONFIG_TEST_STRING_HELPERS is not set
> > # CONFIG_TEST_KSTRTOX is not set
> > CONFIG_STRICT_DEVMEM=y
> > CONFIG_X86_VERBOSE_BOOTUP=y
> > CONFIG_EARLY_PRINTK=y
> > # CONFIG_EARLY_PRINTK_DBGP is not set
> > CONFIG_DEBUG_STACKOVERFLOW=y
> > # CONFIG_X86_PTDUMP is not set
> > CONFIG_DEBUG_RODATA=y
> > # CONFIG_DEBUG_RODATA_TEST is not set
> > CONFIG_DEBUG_SET_MODULE_RONX=y
> > # CONFIG_DEBUG_NX_TEST is not set
> > # CONFIG_DEBUG_TLBFLUSH is not set
> > # CONFIG_IOMMU_DEBUG is not set
> > # CONFIG_IOMMU_STRESS is not set
> > CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> > # CONFIG_X86_DECODER_SELFTEST is not set
> > CONFIG_IO_DELAY_TYPE_0X80=0
> > CONFIG_IO_DELAY_TYPE_0XED=1
> > CONFIG_IO_DELAY_TYPE_UDELAY=2
> > CONFIG_IO_DELAY_TYPE_NONE=3
> > CONFIG_IO_DELAY_0X80=y
> > # CONFIG_IO_DELAY_0XED is not set
> > # CONFIG_IO_DELAY_UDELAY is not set
> > # CONFIG_IO_DELAY_NONE is not set
> > CONFIG_DEFAULT_IO_DELAY_TYPE=0
> > CONFIG_DEBUG_BOOT_PARAMS=y
> > # CONFIG_CPA_DEBUG is not set
> > # CONFIG_OPTIMIZE_INLINING is not set
> > # CONFIG_DEBUG_NMI_SELFTEST is not set
> >
> > #
> > # Security options
> > #
> > CONFIG_KEYS=y
> > # CONFIG_ENCRYPTED_KEYS is not set
> > # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
> > # CONFIG_SECURITY_DMESG_RESTRICT is not set
> > # CONFIG_SECURITY is not set
> > # CONFIG_SECURITYFS is not set
> > CONFIG_DEFAULT_SECURITY_DAC=y
> > CONFIG_DEFAULT_SECURITY=""
> > CONFIG_CRYPTO=y
> >
> > #
> > # Crypto core or helper
> > #
> > CONFIG_CRYPTO_ALGAPI=y
> > CONFIG_CRYPTO_ALGAPI2=y
> > CONFIG_CRYPTO_AEAD=m
> > CONFIG_CRYPTO_AEAD2=y
> > CONFIG_CRYPTO_BLKCIPHER=y
> > CONFIG_CRYPTO_BLKCIPHER2=y
> > CONFIG_CRYPTO_HASH=y
> > CONFIG_CRYPTO_HASH2=y
> > CONFIG_CRYPTO_RNG=m
> > CONFIG_CRYPTO_RNG2=y
> > CONFIG_CRYPTO_PCOMP2=y
> > CONFIG_CRYPTO_MANAGER=y
> > CONFIG_CRYPTO_MANAGER2=y
> > # CONFIG_CRYPTO_USER is not set
> > CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> > CONFIG_CRYPTO_GF128MUL=y
> > CONFIG_CRYPTO_NULL=m
> > # CONFIG_CRYPTO_PCRYPT is not set
> > CONFIG_CRYPTO_WORKQUEUE=y
> > CONFIG_CRYPTO_CRYPTD=m
> > CONFIG_CRYPTO_AUTHENC=m
> > # CONFIG_CRYPTO_TEST is not set
> >
> > #
> > # Authenticated Encryption with Associated Data
> > #
> > CONFIG_CRYPTO_CCM=m
> > CONFIG_CRYPTO_GCM=m
> > CONFIG_CRYPTO_SEQIV=m
> >
> > #
> > # Block modes
> > #
> > CONFIG_CRYPTO_CBC=y
> > CONFIG_CRYPTO_CTR=m
> > CONFIG_CRYPTO_CTS=m
> > CONFIG_CRYPTO_ECB=m
> > CONFIG_CRYPTO_LRW=m
> > CONFIG_CRYPTO_PCBC=m
> > CONFIG_CRYPTO_XTS=m
> >
> > #
> > # Hash modes
> > #
> > # CONFIG_CRYPTO_CMAC is not set
> > CONFIG_CRYPTO_HMAC=m
> > CONFIG_CRYPTO_XCBC=m
> > # CONFIG_CRYPTO_VMAC is not set
> >
> > #
> > # Digest
> > #
> > CONFIG_CRYPTO_CRC32C=m
> > # CONFIG_CRYPTO_CRC32C_INTEL is not set
> > # CONFIG_CRYPTO_CRC32 is not set
> > # CONFIG_CRYPTO_CRC32_PCLMUL is not set
> > CONFIG_CRYPTO_GHASH=m
> > CONFIG_CRYPTO_MD4=m
> > CONFIG_CRYPTO_MD5=y
> > CONFIG_CRYPTO_MICHAEL_MIC=m
> > # CONFIG_CRYPTO_RMD128 is not set
> > # CONFIG_CRYPTO_RMD160 is not set
> > # CONFIG_CRYPTO_RMD256 is not set
> > # CONFIG_CRYPTO_RMD320 is not set
> > CONFIG_CRYPTO_SHA1=y
> > # CONFIG_CRYPTO_SHA1_SSSE3 is not set
> > # CONFIG_CRYPTO_SHA256_SSSE3 is not set
> > # CONFIG_CRYPTO_SHA512_SSSE3 is not set
> > CONFIG_CRYPTO_SHA256=m
> > CONFIG_CRYPTO_SHA512=m
> > CONFIG_CRYPTO_TGR192=m
> > CONFIG_CRYPTO_WP512=m
> > # CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
> >
> > #
> > # Ciphers
> > #
> > CONFIG_CRYPTO_AES=y
> > # CONFIG_CRYPTO_AES_X86_64 is not set
> > # CONFIG_CRYPTO_AES_NI_INTEL is not set
> > CONFIG_CRYPTO_ANUBIS=m
> > CONFIG_CRYPTO_ARC4=m
> > CONFIG_CRYPTO_BLOWFISH=m
> > CONFIG_CRYPTO_BLOWFISH_COMMON=m
> > # CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
> > # CONFIG_CRYPTO_BLOWFISH_AVX2_X86_64 is not set
> > CONFIG_CRYPTO_CAMELLIA=m
> > # CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
> > # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
> > # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
> > CONFIG_CRYPTO_CAST_COMMON=m
> > CONFIG_CRYPTO_CAST5=m
> > # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
> > CONFIG_CRYPTO_CAST6=m
> > # CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
> > CONFIG_CRYPTO_DES=y
> > CONFIG_CRYPTO_FCRYPT=m
> > CONFIG_CRYPTO_KHAZAD=m
> > CONFIG_CRYPTO_SALSA20=m
> > # CONFIG_CRYPTO_SALSA20_X86_64 is not set
> > CONFIG_CRYPTO_SEED=m
> > CONFIG_CRYPTO_SERPENT=m
> > # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
> > # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
> > # CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
> > CONFIG_CRYPTO_TEA=m
> > CONFIG_CRYPTO_TWOFISH=m
> > CONFIG_CRYPTO_TWOFISH_COMMON=m
> > # CONFIG_CRYPTO_TWOFISH_X86_64 is not set
> > # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
> > # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
> > # CONFIG_CRYPTO_TWOFISH_AVX2_X86_64 is not set
> >
> > #
> > # Compression
> > #
> > CONFIG_CRYPTO_DEFLATE=m
> > # CONFIG_CRYPTO_ZLIB is not set
> > CONFIG_CRYPTO_LZO=m
> >
> > #
> > # Random Number Generation
> > #
> > # CONFIG_CRYPTO_ANSI_CPRNG is not set
> > # CONFIG_CRYPTO_USER_API_HASH is not set
> > # CONFIG_CRYPTO_USER_API_SKCIPHER is not set
> > # CONFIG_CRYPTO_HW is not set
> > # CONFIG_ASYMMETRIC_KEY_TYPE is not set
> > CONFIG_HAVE_KVM=y
> > CONFIG_HAVE_KVM_IRQCHIP=y
> > CONFIG_HAVE_KVM_IRQ_ROUTING=y
> > CONFIG_HAVE_KVM_EVENTFD=y
> > CONFIG_KVM_APIC_ARCHITECTURE=y
> > CONFIG_KVM_MMIO=y
> > CONFIG_KVM_ASYNC_PF=y
> > CONFIG_HAVE_KVM_MSI=y
> > CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
> > CONFIG_VIRTUALIZATION=y
> > CONFIG_KVM=m
> > CONFIG_KVM_INTEL=m
> > # CONFIG_KVM_AMD is not set
> > # CONFIG_KVM_MMU_AUDIT is not set
> > CONFIG_BINARY_PRINTF=y
> >
> > #
> > # Library routines
> > #
> > CONFIG_BITREVERSE=y
> > CONFIG_GENERIC_STRNCPY_FROM_USER=y
> > CONFIG_GENERIC_STRNLEN_USER=y
> > CONFIG_GENERIC_FIND_FIRST_BIT=y
> > CONFIG_GENERIC_PCI_IOMAP=y
> > CONFIG_GENERIC_IOMAP=y
> > CONFIG_GENERIC_IO=y
> > CONFIG_PERCPU_RWSEM=y
> > CONFIG_CRC_CCITT=m
> > # CONFIG_CRC16 is not set
> > CONFIG_CRC_T10DIF=y
> > CONFIG_CRC_ITU_T=y
> > CONFIG_CRC32=y
> > # CONFIG_CRC32_SELFTEST is not set
> > CONFIG_CRC32_SLICEBY8=y
> > # CONFIG_CRC32_SLICEBY4 is not set
> > # CONFIG_CRC32_SARWATE is not set
> > # CONFIG_CRC32_BIT is not set
> > CONFIG_CRC7=m
> > CONFIG_LIBCRC32C=m
> > # CONFIG_CRC8 is not set
> > CONFIG_ZLIB_INFLATE=y
> > CONFIG_ZLIB_DEFLATE=m
> > CONFIG_LZO_COMPRESS=y
> > CONFIG_LZO_DECOMPRESS=y
> > CONFIG_XZ_DEC=y
> > CONFIG_XZ_DEC_X86=y
> > CONFIG_XZ_DEC_POWERPC=y
> > CONFIG_XZ_DEC_IA64=y
> > CONFIG_XZ_DEC_ARM=y
> > CONFIG_XZ_DEC_ARMTHUMB=y
> > CONFIG_XZ_DEC_SPARC=y
> > CONFIG_XZ_DEC_BCJ=y
> > # CONFIG_XZ_DEC_TEST is not set
> > CONFIG_DECOMPRESS_GZIP=y
> > CONFIG_DECOMPRESS_BZIP2=y
> > CONFIG_DECOMPRESS_LZMA=y
> > CONFIG_DECOMPRESS_XZ=y
> > CONFIG_DECOMPRESS_LZO=y
> > CONFIG_TEXTSEARCH=y
> > CONFIG_TEXTSEARCH_KMP=m
> > CONFIG_TEXTSEARCH_BM=m
> > CONFIG_TEXTSEARCH_FSM=m
> > CONFIG_HAS_IOMEM=y
> > CONFIG_HAS_IOPORT=y
> > CONFIG_HAS_DMA=y
> > CONFIG_CHECK_SIGNATURE=y
> > CONFIG_CPU_RMAP=y
> > CONFIG_DQL=y
> > CONFIG_NLATTR=y
> > CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
> > CONFIG_AVERAGE=y
> > # CONFIG_CORDIC is not set
> > # CONFIG_DDR is not set
> > CONFIG_OID_REGISTRY=y
>
> > [ 0.000000] Initializing cgroup subsys cpu
> > [ 0.000000] Linux version 3.10.0-rc1-fullnohzdisabled (root@tiehlicka) (gcc version 4.7.3 (Debian 4.7.3-4) ) #149 SMP PREEMPT Mon May 13 13:26:26 CEST 2013
> > [ 0.000000] Command line: root=UUID=ca09430c-6e28-44af-a30e-79fe3c80e9f9 ro craskernel=256M@16M resume=/dev/sda8 netconsole=@10.100.13.132/eth0,@10.100.13.54/00:19:D1:E4:E8:5A no_console_suspend loglevel=7
> > [ 0.000000] e820: BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a7ff] usable
> > [ 0.000000] BIOS-e820: [mem 0x000000000009a800-0x000000000009ffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
> > [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
> > [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000caa28fff] usable
> > [ 0.000000] BIOS-e820: [mem 0x00000000caa29000-0x00000000caa6cfff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000caa6d000-0x00000000cadb6fff] usable
> > [ 0.000000] BIOS-e820: [mem 0x00000000cadb7000-0x00000000cade6fff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000cade7000-0x00000000cafe6fff] ACPI NVS
> > [ 0.000000] BIOS-e820: [mem 0x00000000cafe7000-0x00000000caffefff] ACPI data
> > [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
> > [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012dffffff] usable
> > [ 0.000000] NX (Execute Disable) protection: active
> > [ 0.000000] SMBIOS 2.6 present.
> > [ 0.000000] DMI: Dell Inc. Latitude E6320/09PHH9, BIOS A08 10/18/2011
> > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> > [ 0.000000] No AGP bridge found
> > [ 0.000000] e820: last_pfn = 0x12e000 max_arch_pfn = 0x400000000
> > [ 0.000000] MTRR default type: uncachable
> > [ 0.000000] MTRR fixed ranges enabled:
> > [ 0.000000] 00000-9FFFF write-back
> > [ 0.000000] A0000-BFFFF uncachable
> > [ 0.000000] C0000-FFFFF write-protect
> > [ 0.000000] MTRR variable ranges enabled:
> > [ 0.000000] 0 base 000000000 mask F80000000 write-back
> > [ 0.000000] 1 base 080000000 mask FC0000000 write-back
> > [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
> > [ 0.000000] 3 base 0C8000000 mask FFC000000 write-back
> > [ 0.000000] 4 base 0CB000000 mask FFF000000 uncachable
> > [ 0.000000] 5 base 100000000 mask FE0000000 write-back
> > [ 0.000000] 6 base 120000000 mask FF0000000 write-back
> > [ 0.000000] 7 base 12E000000 mask FFE000000 uncachable
> > [ 0.000000] 8 disabled
> > [ 0.000000] 9 disabled
> > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> > [ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
> > [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
> > [ 0.000000] found SMP MP-table at [mem 0x000f1ad0-0x000f1adf] mapped at [ffff8800000f1ad0]
> > [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
> > [ 0.000000] reserving inaccessible SNB gfx pages
> > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> > [ 0.000000] BRK [0x01c99000, 0x01c99fff] PGTABLE
> > [ 0.000000] BRK [0x01c9a000, 0x01c9afff] PGTABLE
> > [ 0.000000] BRK [0x01c9b000, 0x01c9bfff] PGTABLE
> > [ 0.000000] init_memory_mapping: [mem 0x12de00000-0x12dffffff]
> > [ 0.000000] [mem 0x12de00000-0x12dffffff] page 4k
> > [ 0.000000] BRK [0x01c9c000, 0x01c9cfff] PGTABLE
> > [ 0.000000] BRK [0x01c9d000, 0x01c9dfff] PGTABLE
> > [ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12ddfffff]
> > [ 0.000000] [mem 0x12c000000-0x12ddfffff] page 4k
> > [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
> > [ 0.000000] [mem 0x100000000-0x12bffffff] page 4k
> > [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
> > [ 0.000000] [mem 0x00100000-0x1fffffff] page 4k
> > [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
> > [ 0.000000] [mem 0x20200000-0x3fffffff] page 4k
> > [ 0.000000] init_memory_mapping: [mem 0x40200000-0xcaa28fff]
> > [ 0.000000] [mem 0x40200000-0xcaa28fff] page 4k
> > [ 0.000000] init_memory_mapping: [mem 0xcaa6d000-0xcadb6fff]
> > [ 0.000000] [mem 0xcaa6d000-0xcadb6fff] page 4k
> > [ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
> > [ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
> > [ 0.000000] RAMDISK: [mem 0x1fd69000-0x1ffeffff]
> > [ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
> > [ 0.000000] ACPI: XSDT 00000000caffde18 00074 (v01 DELL CBX3 06222004 MSFT 00010013)
> > [ 0.000000] ACPI: FACP 00000000caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
> > [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130328/tbfadt-395)
> > [ 0.000000] ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40, using 32 (20130328/tbfadt-522)
> > [ 0.000000] ACPI: DSDT 00000000caf66018 08461 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
> > [ 0.000000] ACPI: FACS 00000000cafe4e40 00040
> > [ 0.000000] ACPI: APIC 00000000caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013)
> > [ 0.000000] ACPI: TCPA 00000000cafe5d18 00032 (v02 00000000 00000000)
> > [ 0.000000] ACPI: SSDT 00000000caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
> > [ 0.000000] ACPI: MCFG 00000000cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
> > [ 0.000000] ACPI: HPET 00000000cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
> > [ 0.000000] ACPI: BOOT 00000000cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013)
> > [ 0.000000] ACPI: SSDT 00000000caf7d018 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
> > [ 0.000000] ACPI: SSDT 00000000caf7c018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903)
> > [ 0.000000] ACPI: SLIC 00000000caf86c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013)
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880129000000-ffff88012cffffff] on node 0
> > [ 0.000000] Zone ranges:
> > [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> > [ 0.000000] Normal [mem 0x100000000-0x12dffffff]
> > [ 0.000000] Movable zone start for each node
> > [ 0.000000] Early memory node ranges
> > [ 0.000000] node 0: [mem 0x00001000-0x00099fff]
> > [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
> > [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
> > [ 0.000000] node 0: [mem 0x40200000-0xcaa28fff]
> > [ 0.000000] node 0: [mem 0xcaa6d000-0xcadb6fff]
> > [ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
> > [ 0.000000] node 0: [mem 0x100000000-0x12dffffff]
> > [ 0.000000] On node 0 totalpages: 1018125
> > [ 0.000000] DMA zone: 64 pages used for memmap
> > [ 0.000000] DMA zone: 153 pages reserved
> > [ 0.000000] DMA zone: 3993 pages, LIFO batch:0
> > [ 0.000000] DMA32 zone: 12902 pages used for memmap
> > [ 0.000000] DMA32 zone: 825716 pages, LIFO batch:31
> > [ 0.000000] Normal zone: 2944 pages used for memmap
> > [ 0.000000] Normal zone: 188416 pages, LIFO batch:31
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
> > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > [ 0.000000] ACPI: IRQ0 used by override.
> > [ 0.000000] ACPI: IRQ2 used by override.
> > [ 0.000000] ACPI: IRQ9 used by override.
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> > [ 0.000000] smpboot: 16 Processors exceeds NR_CPUS limit of 8
> > [ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
> > [ 0.000000] nr_irqs_gsi: 40
> > [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
> > [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> > [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
> > [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
> > [ 0.000000] PM: Registered nosave memory: 00000000caa29000 - 00000000caa6d000
> > [ 0.000000] PM: Registered nosave memory: 00000000cadb7000 - 00000000cade7000
> > [ 0.000000] PM: Registered nosave memory: 00000000cade7000 - 00000000cafe7000
> > [ 0.000000] PM: Registered nosave memory: 00000000cafe7000 - 00000000cafff000
> > [ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000fed1c000
> > [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
> > [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000
> > [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
> > [ 0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
> > [ 0.000000] e820: [mem 0xcb000000-0xfed1bfff] available for PCI devices
> > [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
> > [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012d400000 s80128 r8192 d22272 u262144
> > [ 0.000000] pcpu-alloc: s80128 r8192 d22272 u262144 alloc=1*2097152
> > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1002062
> > [ 0.000000] Kernel command line: root=UUID=ca09430c-6e28-44af-a30e-79fe3c80e9f9 ro craskernel=256M@16M resume=/dev/sda8 netconsole=@10.100.13.132/eth0,@10.100.13.54/00:19:D1:E4:E8:5A no_console_suspend loglevel=7
> > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> > [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> > [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> > [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
> > [ 0.000000] Checking aperture...
> > [ 0.000000] No AGP bridge found
> > [ 0.000000] Memory: 3909568k/4947968k available (4656k kernel code, 875468k absent, 162932k reserved, 6235k data, 1004k init)
> > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> > [ 0.000000] Preemptible hierarchical RCU implementation.
> > [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
> > [ 0.000000] Experimental no-CBs for all CPUs
> > [ 0.000000] Experimental no-CBs CPUs: 0-7.
> > [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
> > [ 0.000000] Console: colour VGA+ 80x25
> > [ 0.000000] console [tty0] enabled
> > [ 0.000000] allocated 16777216 bytes of page_cgroup
> > [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> > [ 0.000000] hpet clockevent registered
> > [ 0.000000] tsc: Fast TSC calibration using PIT
> > [ 0.004000] tsc: Detected 2593.891 MHz processor
> > [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.78 BogoMIPS (lpj=10375564)
> > [ 0.000191] pid_max: default: 32768 minimum: 301
> > [ 0.000341] Mount-cache hash table entries: 256
> > [ 0.000626] Initializing cgroup subsys memory
> > [ 0.000749] CPU: Physical Processor ID: 0
> > [ 0.000852] CPU: Processor Core ID: 0
> > [ 0.000947] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> > [ 0.000947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
> > [ 0.001104] mce: CPU supports 7 MCE banks
> > [ 0.001205] CPU0: Thermal monitoring enabled (TM1)
> > [ 0.001305] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
> > [ 0.001305] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
> > [ 0.001305] tlb_flushall_shift: 5
> > [ 0.001598] debug: unmapping init [mem 0xffffffff81b9f000-0xffffffff81ba3fff]
> > [ 0.001707] ACPI: Core revision 20130328
> > [ 0.009580] ACPI: All ACPI Tables successfully acquired
> > [ 0.010544] ftrace: allocating 21903 entries in 86 pages
> > [ 0.021836] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> > [ 0.061642] smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz (fam: 06, model: 2a, stepping: 07)
> > [ 0.061911] TSC deadline timer enabled
> > [ 0.061921] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
> > [ 0.062225] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
> > [ 0.062373] ... version: 3
> > [ 0.062466] ... bit width: 48
> > [ 0.062560] ... generic registers: 8
> > [ 0.062652] ... value mask: 0000ffffffffffff
> > [ 0.062747] ... max period: 000000007fffffff
> > [ 0.062842] ... fixed-purpose events: 3
> > [ 0.062935] ... event mask: 00000007000000ff
> > [ 0.086065] smpboot: Booting Node 0, Processors #1
> > [ 0.099316] Brought up 2 CPUs
> > [ 0.099496] smpboot: Total of 2 processors activated (10375.56 BogoMIPS)
> > [ 0.101767] PM: Registering ACPI NVS region [mem 0xcade7000-0xcafe6fff] (2097152 bytes)
> > [ 0.101991] reboot: PCI series board detected. Selecting Dell Latitude E6320-method for reboots.
> > [ 0.103132] NET: Registered protocol family 16
> > [ 0.103560] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> > [ 0.103707] ACPI: bus type PCI registered
> > [ 0.103818] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> > [ 0.103968] PCI: not using MMCONFIG
> > [ 0.104061] PCI: Using configuration type 1 for base access
> > [ 0.104163] dmi type 0xB1 record - unknown flag
> > [ 0.109188] bio: create slab <bio-0> at 0
> > [ 0.109390] ACPI: Added _OSI(Module Device)
> > [ 0.109485] ACPI: Added _OSI(Processor Device)
> > [ 0.109579] ACPI: Added _OSI(3.0 _SCP Extensions)
> > [ 0.109674] ACPI: Added _OSI(Processor Aggregator Device)
> > [ 0.111161] ACPI: EC: Look up EC in DSDT
> > [ 0.116748] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> > [ 0.220039] ACPI: SSDT 00000000cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
> > [ 0.220651] ACPI: Dynamic OEM Table Load:
> > [ 0.220821] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
> > [ 0.227929] ACPI: SSDT 00000000cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
> > [ 0.228598] ACPI: Dynamic OEM Table Load:
> > [ 0.228768] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
> > [ 0.235647] ACPI: SSDT 00000000cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
> > [ 0.236233] ACPI: Dynamic OEM Table Load:
> > [ 0.236403] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
> > [ 0.291751] ACPI: Interpreter enabled
> > [ 0.291850] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
> > [ 0.292078] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
> > [ 0.292317] ACPI: (supports S0 S3 S4 S5)
> > [ 0.292411] ACPI: Using IOAPIC for interrupt routing
> > [ 0.292529] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> > [ 0.293224] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
> > [ 0.296656] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> > [ 1.030226] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
> > [ 1.030381] \_SB_.PCI0:_OSC invalid UUID
> > [ 1.030382] _OSC request data:1 8 0
> > [ 1.031402] PCI host bridge to bus 0000:00
> > [ 1.031498] pci_bus 0000:00: root bus resource [bus 00-3e]
> > [ 1.031594] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> > [ 1.031691] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> > [ 1.031788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> > [ 1.031887] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
> > [ 1.031985] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
> > [ 1.032090] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
> > [ 1.032211] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
> > [ 1.032222] pci 0000:00:02.0: reg 10: [mem 0xe1400000-0xe17fffff 64bit]
> > [ 1.032228] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
> > [ 1.032233] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
> > [ 1.032367] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
> > [ 1.032392] pci 0000:00:16.0: reg 10: [mem 0xe2eb0000-0xe2eb000f 64bit]
> > [ 1.032469] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> > [ 1.032580] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
> > [ 1.032600] pci 0000:00:16.3: reg 10: [io 0x40e0-0x40e7]
> > [ 1.032610] pci 0000:00:16.3: reg 14: [mem 0xe2e90000-0xe2e90fff]
> > [ 1.032795] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
> > [ 1.032815] pci 0000:00:19.0: reg 10: [mem 0xe2e00000-0xe2e1ffff]
> > [ 1.032824] pci 0000:00:19.0: reg 14: [mem 0xe2e80000-0xe2e80fff]
> > [ 1.032833] pci 0000:00:19.0: reg 18: [io 0x4080-0x409f]
> > [ 1.032896] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> > [ 1.052859] pci 0000:00:19.0: System wakeup disabled by ACPI
> > [ 1.053022] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
> > [ 1.053047] pci 0000:00:1a.0: reg 10: [mem 0xe2e70000-0xe2e703ff]
> > [ 1.053139] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> > [ 1.053203] pci 0000:00:1a.0: System wakeup disabled by ACPI
> > [ 1.053364] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
> > [ 1.053382] pci 0000:00:1b.0: reg 10: [mem 0xe2e60000-0xe2e63fff 64bit]
> > [ 1.053451] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> > [ 1.053478] pci 0000:00:1b.0: System wakeup disabled by ACPI
> > [ 1.053630] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
> > [ 1.053761] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> > [ 1.053803] pci 0000:00:1c.0: System wakeup disabled by ACPI
> > [ 1.053952] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
> > [ 1.054082] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> > [ 1.054129] pci 0000:00:1c.1: System wakeup disabled by ACPI
> > [ 1.054279] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
> > [ 1.054409] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> > [ 1.054470] pci 0000:00:1c.2: System wakeup disabled by ACPI
> > [ 1.054623] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
> > [ 1.054753] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> > [ 1.054797] pci 0000:00:1c.3: System wakeup disabled by ACPI
> > [ 1.054948] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
> > [ 1.055080] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> > [ 1.055128] pci 0000:00:1c.5: System wakeup disabled by ACPI
> > [ 1.055281] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
> > [ 1.055304] pci 0000:00:1d.0: reg 10: [mem 0xe2e50000-0xe2e503ff]
> > [ 1.055394] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> > [ 1.055458] pci 0000:00:1d.0: System wakeup disabled by ACPI
> > [ 1.055608] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
> > [ 1.055779] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
> > [ 1.055799] pci 0000:00:1f.2: reg 10: [io 0x40d0-0x40d7]
> > [ 1.055807] pci 0000:00:1f.2: reg 14: [io 0x40c0-0x40c3]
> > [ 1.055816] pci 0000:00:1f.2: reg 18: [io 0x40b0-0x40b7]
> > [ 1.055824] pci 0000:00:1f.2: reg 1c: [io 0x40a0-0x40a3]
> > [ 1.055832] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
> > [ 1.055841] pci 0000:00:1f.2: reg 24: [mem 0xe2e40000-0xe2e407ff]
> > [ 1.055886] pci 0000:00:1f.2: PME# supported from D3hot
> > [ 1.055982] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
> > [ 1.055999] pci 0000:00:1f.3: reg 10: [mem 0xe2e30000-0xe2e300ff 64bit]
> > [ 1.056020] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
> > [ 1.056228] pci 0000:00:1c.0: PCI bridge to [bus 01]
> > [ 1.056598] pci 0000:02:00.0: [8086:422b] type 00 class 0x028000
> > [ 1.056767] pci 0000:02:00.0: reg 10: [mem 0xe2d00000-0xe2d01fff 64bit]
> > [ 1.057470] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> > [ 1.057595] pci 0000:02:00.0: System wakeup disabled by ACPI
> > [ 1.057732] pci 0000:00:1c.1: PCI bridge to [bus 02]
> > [ 1.057835] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff]
> > [ 1.057944] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
> > [ 1.058044] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
> > [ 1.058050] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff]
> > [ 1.058058] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
> > [ 1.058159] pci 0000:00:1c.3: PCI bridge to [bus 09]
> > [ 1.058258] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
> > [ 1.058264] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff]
> > [ 1.058273] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
> > [ 1.060120] pci 0000:0a:00.0: [1217:8221] type 00 class 0x080501
> > [ 1.060165] pci 0000:0a:00.0: reg 10: [mem 0xe2c00000-0xe2c001ff]
> > [ 1.060488] pci 0000:0a:00.0: supports D1 D2
> > [ 1.060490] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > [ 1.060546] pci 0000:0a:00.0: System wakeup disabled by ACPI
> > [ 1.060681] pci 0000:00:1c.5: PCI bridge to [bus 0a]
> > [ 1.060786] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff]
> > [ 1.060827] pci_bus 0000:00: on NUMA node 0
> > [ 1.060892] \_SB_.PCI0:_OSC invalid UUID
> > [ 1.060893] _OSC request data:1 19 0
> > [ 1.060897] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
> > [ 1.061046] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
> > [ 1.125207] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> > [ 1.125924] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> > [ 1.126641] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> > [ 1.127358] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> > [ 1.128073] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
> > [ 1.128702] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> > [ 1.129465] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
> > [ 1.130095] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> > [ 1.209725] ACPI: Enabled 2 GPEs in block 00 to 3F
> > [ 1.209903] acpi root: \_SB_.PCI0 notify handler is installed
> > [ 1.209958] Found 1 acpi root devices
> > [ 1.210041] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
> > [ 1.273264] ACPI: No dock devices found.
> > [ 1.273455] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> > [ 1.273606] vgaarb: loaded
> > [ 1.273697] vgaarb: bridge control possible 0000:00:02.0
> > [ 1.273924] SCSI subsystem initialized
> > [ 1.274018] ACPI: bus type ATA registered
> > [ 1.274208] libata version 3.00 loaded.
> > [ 1.274214] ACPI: bus type USB registered
> > [ 1.274366] usbcore: registered new interface driver usbfs
> > [ 1.274490] usbcore: registered new interface driver hub
> > [ 1.274625] usbcore: registered new device driver usb
> > [ 1.274794] pps_core: LinuxPPS API ver. 1 registered
> > [ 1.274890] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> > [ 1.275060] PTP clock support registered
> > [ 1.275221] PCI: Using ACPI for IRQ routing
> > [ 1.276922] PCI: pci_cache_line_size set to 64 bytes
> > [ 1.278740] e820: reserve RAM buffer [mem 0x0009a800-0x0009ffff]
> > [ 1.278742] e820: reserve RAM buffer [mem 0xcaa29000-0xcbffffff]
> > [ 1.278744] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
> > [ 1.278746] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
> > [ 1.278747] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
> > [ 1.278990] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> > [ 1.279433] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> > [ 1.281540] Switching to clocksource hpet
> > [ 1.286249] pnp: PnP ACPI init
> > [ 1.286351] ACPI: bus type PNP registered
> > [ 1.286488] pnp 00:00: [dma 4]
> > [ 1.286540] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
> > [ 1.286595] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
> > [ 1.286772] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
> > [ 1.286871] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
> > [ 1.286935] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
> > [ 1.287010] system 00:04: [io 0x0680-0x069f] has been reserved
> > [ 1.287108] system 00:04: [io 0x1000-0x100f] has been reserved
> > [ 1.287205] system 00:04: [io 0xffff] has been reserved
> > [ 1.287301] system 00:04: [io 0xffff] has been reserved
> > [ 1.287397] system 00:04: [io 0x0400-0x047f] has been reserved
> > [ 1.287496] system 00:04: [io 0x0500-0x057f] has been reserved
> > [ 1.287593] system 00:04: [io 0x164e-0x164f] has been reserved
> > [ 1.287691] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 1.287747] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
> > [ 1.287808] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
> > [ 1.393929] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled)
> > [ 1.393995] pnp 00:08: Plug and Play ACPI device, IDs DLL0492 PNP0f13 (active)
> > [ 1.394090] pnp 00:09: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)
> > [ 1.394349] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
> > [ 1.394449] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
> > [ 1.394546] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
> > [ 1.394644] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
> > [ 1.394743] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
> > [ 1.394841] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
> > [ 1.394939] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
> > [ 1.395038] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
> > [ 1.395136] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
> > [ 1.395235] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
> > [ 1.395334] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 1.453968] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
> > [ 1.610455] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
> > [ 1.610556] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
> > [ 1.610656] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> > [ 1.610667] pnp: PnP ACPI: found 13 devices
> > [ 1.610760] ACPI: bus type PNP unregistered
> > [ 1.618437] pci 0000:00:1c.0: PCI bridge to [bus 01]
> > [ 1.618550] pci 0000:00:1c.1: PCI bridge to [bus 02]
> > [ 1.618650] pci 0000:00:1c.1: bridge window [mem 0xe2d00000-0xe2dfffff]
> > [ 1.618759] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
> > [ 1.618856] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
> > [ 1.618958] pci 0000:00:1c.2: bridge window [mem 0xe2200000-0xe2bfffff]
> > [ 1.619060] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
> > [ 1.619215] pci 0000:00:1c.3: PCI bridge to [bus 09]
> > [ 1.619311] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
> > [ 1.619413] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe21fffff]
> > [ 1.619515] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
> > [ 1.619668] pci 0000:00:1c.5: PCI bridge to [bus 0a]
> > [ 1.619769] pci 0000:00:1c.5: bridge window [mem 0xe2c00000-0xe2cfffff]
> > [ 1.620392] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> > [ 1.620394] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> > [ 1.620396] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> > [ 1.620398] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
> > [ 1.620400] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
> > [ 1.620402] pci_bus 0000:02: resource 1 [mem 0xe2d00000-0xe2dfffff]
> > [ 1.620404] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
> > [ 1.620406] pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe2bfffff]
> > [ 1.620408] pci_bus 0000:03: resource 2 [mem 0xe0a00000-0xe13fffff 64bit pref]
> > [ 1.620410] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
> > [ 1.620412] pci_bus 0000:09: resource 1 [mem 0xe1800000-0xe21fffff]
> > [ 1.620414] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
> > [ 1.620416] pci_bus 0000:0a: resource 1 [mem 0xe2c00000-0xe2cfffff]
> > [ 1.620451] NET: Registered protocol family 2
> > [ 1.620687] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
> > [ 1.620934] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
> > [ 1.621120] TCP: Hash tables configured (established 32768 bind 32768)
> > [ 1.621237] TCP: reno registered
> > [ 1.621333] UDP hash table entries: 2048 (order: 4, 65536 bytes)
> > [ 1.621443] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
> > [ 1.621595] NET: Registered protocol family 1
> > [ 1.621781] RPC: Registered named UNIX socket transport module.
> > [ 1.621891] RPC: Registered udp transport module.
> > [ 1.621985] RPC: Registered tcp transport module.
> > [ 1.622079] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > [ 1.622183] pci 0000:00:02.0: Boot video device
> > [ 1.624383] PCI: CLS 64 bytes, default 64
> > [ 1.624419] Trying to unpack rootfs image as initramfs...
> > [ 1.667619] debug: unmapping init [mem 0xffff88001fd69000-0xffff88001ffeffff]
> > [ 1.667777] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> > [ 1.667876] software IO TLB [mem 0xc6a29000-0xcaa29000] (64MB) mapped at [ffff8800c6a29000-ffff8800caa28fff]
> > [ 1.668104] Simple Boot Flag at 0xf3 set to 0x1
> > [ 1.668628] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
> > [ 1.668727] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
> > [ 1.668865] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> > [ 1.694349] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> > [ 1.698281] NFS: Registering the id_resolver key type
> > [ 1.698384] Key type id_resolver registered
> > [ 1.698479] Key type id_legacy registered
> > [ 1.698633] msgmni has been set to 7635
> > [ 1.700338] io scheduler noop registered
> > [ 1.700433] io scheduler deadline registered
> > [ 1.700582] io scheduler cfq registered (default)
> > [ 1.701725] ACPI: AC Adapter [AC] (on-line)
> > [ 1.702335] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> > [ 1.703163] ACPI: Lid Switch [LID]
> > [ 1.703318] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> > [ 1.703467] ACPI: Power Button [PBTN]
> > [ 1.703622] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
> > [ 1.703771] ACPI: Sleep Button [SBTN]
> > [ 1.703924] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> > [ 1.704071] ACPI: Power Button [PWRF]
> > [ 1.704298] ACPI: Requesting acpi_cpufreq
> > [ 1.704935] Monitor-Mwait will be used to enter C-1 state
> > [ 1.704941] Monitor-Mwait will be used to enter C-2 state
> > [ 1.704945] Monitor-Mwait will be used to enter C-3 state
> > [ 1.704955] ACPI: acpi_idle registered with cpuidle
> > [ 2.106292] thermal LNXTHERM:00: registered as thermal_zone0
> > [ 2.106390] ACPI: Thermal Zone [THM] (25 C)
> > [ 2.121802] ACPI: Battery Slot [BAT0] (battery present)
> > [ 2.135935] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> > [ 2.206811] 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A
> > [ 2.222595] Linux agpgart interface v0.103
> > [ 2.224494] brd: module loaded
> > [ 2.225471] loop: module loaded
> > [ 2.225565] Uniform Multi-Platform E-IDE driver
> > [ 2.225778] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> > [ 2.225936] Probing IDE interface ide0...
> > [ 2.306844] ACPI: Battery Slot [BAT1] (battery absent)
> > [ 2.378875] ACPI: Battery Slot [BAT2] (battery absent)
> > [ 2.666574] tsc: Refined TSC clocksource calibration: 2594.107 MHz
> > [ 2.666693] Switching to clocksource tsc
> > [ 2.786741] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > [ 2.786887] Probing IDE interface ide1...
> > [ 3.347100] ide1 at 0x170-0x177,0x376 on irq 15
> > [ 3.347238] ide-gd driver 1.18
> > [ 3.347356] ide-cd driver 5.00
> > [ 3.347648] ahci 0000:00:1f.2: version 3.0
> > [ 3.347792] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
> > [ 3.347824] ahci: SSS flag set, parallel bus scan disabled
> > [ 3.363060] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
> > [ 3.363223] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
> > [ 3.363376] ahci 0000:00:1f.2: setting latency timer to 64
> > [ 3.395752] scsi0 : ahci
> > [ 3.395950] scsi1 : ahci
> > [ 3.396131] scsi2 : ahci
> > [ 3.396310] scsi3 : ahci
> > [ 3.396489] scsi4 : ahci
> > [ 3.396667] scsi5 : ahci
> > [ 3.396831] ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 40
> > [ 3.396980] ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 40
> > [ 3.397126] ata3: DUMMY
> > [ 3.397218] ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 40
> > [ 3.397364] ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 40
> > [ 3.397512] ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 40
> > [ 3.397808] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> > [ 3.397905] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
> > [ 3.398134] e1000e 0000:00:19.0: setting latency timer to 64
> > [ 3.398187] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
> > [ 3.398353] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
> > [ 3.595196] e1000e 0000:00:19.0 eth0: registered PHC clock
> > [ 3.595293] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:4e:b6:e1
> > [ 3.595441] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
> > [ 3.595586] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 2041FF-0FF
> > [ 3.595716] sky2: driver version 1.30
> > [ 3.595914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > [ 3.596012] ehci-pci: EHCI PCI platform driver
> > [ 3.596228] ehci-pci 0000:00:1a.0: setting latency timer to 64
> > [ 3.596237] ehci-pci 0000:00:1a.0: EHCI Host Controller
> > [ 3.596373] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
> > [ 3.596531] ehci-pci 0000:00:1a.0: debug port 2
> > [ 3.600523] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> > [ 3.600539] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe2e70000
> > [ 3.611193] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> > [ 3.611337] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> > [ 3.611436] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.611582] usb usb1: Product: EHCI Host Controller
> > [ 3.611677] usb usb1: Manufacturer: Linux 3.10.0-rc1-fullnohzdisabled ehci_hcd
> > [ 3.611823] usb usb1: SerialNumber: 0000:00:1a.0
> > [ 3.612030] hub 1-0:1.0: USB hub found
> > [ 3.612127] hub 1-0:1.0: 3 ports detected
> > [ 3.612400] ehci-pci 0000:00:1d.0: setting latency timer to 64
> > [ 3.612406] ehci-pci 0000:00:1d.0: EHCI Host Controller
> > [ 3.612549] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
> > [ 3.612707] ehci-pci 0000:00:1d.0: debug port 2
> > [ 3.616708] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> > [ 3.616722] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe2e50000
> > [ 3.627202] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> > [ 3.627342] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> > [ 3.627440] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.627588] usb usb2: Product: EHCI Host Controller
> > [ 3.627683] usb usb2: Manufacturer: Linux 3.10.0-rc1-fullnohzdisabled ehci_hcd
> > [ 3.627829] usb usb2: SerialNumber: 0000:00:1d.0
> > [ 3.628026] hub 2-0:1.0: USB hub found
> > [ 3.628122] hub 2-0:1.0: 3 ports detected
> > [ 3.628307] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > [ 3.628435] uhci_hcd: USB Universal Host Controller Interface driver
> > [ 3.628604] usbcore: registered new interface driver usb-storage
> > [ 3.628725] usbcore: registered new interface driver ums-alauda
> > [ 3.628848] usbcore: registered new interface driver ums-datafab
> > [ 3.628976] usbcore: registered new interface driver ums-freecom
> > [ 3.629099] usbcore: registered new interface driver ums-isd200
> > [ 3.629221] usbcore: registered new interface driver ums-jumpshot
> > [ 3.629345] usbcore: registered new interface driver ums-karma
> > [ 3.629467] usbcore: registered new interface driver ums-sddr09
> > [ 3.629589] usbcore: registered new interface driver ums-sddr55
> > [ 3.629711] usbcore: registered new interface driver ums-usbat
> > [ 3.629890] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> > [ 3.630431] i8042: Warning: Keylock active
> > [ 3.631764] serio: i8042 KBD port at 0x60,0x64 irq 1
> > [ 3.631861] serio: i8042 AUX port at 0x60,0x64 irq 12
> > [ 3.632049] mousedev: PS/2 mouse device common for all mice
> > [ 3.632404] cpuidle: using governor ladder
> > [ 3.632544] cpuidle: using governor menu
> > [ 3.632711] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> > [ 3.632921] hidraw: raw HID events driver (C) Jiri Kosina
> > [ 3.633237] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
> > [ 3.633975] usbcore: registered new interface driver usbhid
> > [ 3.634071] usbhid: USB HID core driver
> > [ 3.634165] oprofile: using NMI interrupt.
> > [ 3.634369] TCP: cubic registered
> > [ 3.634650] NET: Registered protocol family 10
> > [ 3.634950] sit: IPv6 over IPv4 tunneling driver
> > [ 3.635220] NET: Registered protocol family 17
> > [ 3.635333] Bridge firewalling registered
> > [ 3.635443] Key type dns_resolver registered
> > [ 3.635859] PM: Checking hibernation image partition /dev/sda8
> > [ 3.715350] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> > [ 3.815784] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > [ 3.816586] ata1.00: ATA-9: INTEL SSDSC2CT180A3, 300i, max UDMA/133
> > [ 3.816702] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> > [ 3.891851] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > [ 3.892659] ata1.00: configured for UDMA/133
> > [ 3.899698] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CT18 300i PQ: 0 ANSI: 5
> > [ 3.900389] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
> > [ 3.900453] sd 0:0:0:0: Attached scsi generic sg0 type 0
> > [ 3.901017] sd 0:0:0:0: [sda] Write Protect is off
> > [ 3.901131] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 3.901199] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 3.902569] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
> > [ 3.903275] sd 0:0:0:0: [sda] Attached SCSI disk
> > [ 3.923482] usb 1-1: new high-speed USB device number 2 using ehci-pci
> > [ 4.056196] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
> > [ 4.056306] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> > [ 4.056993] hub 1-1:1.0: USB hub found
> > [ 4.057312] hub 1-1:1.0: 6 ports detected
> > [ 4.167646] usb 2-1: new high-speed USB device number 2 using ehci-pci
> > [ 4.219672] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > [ 4.223214] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A4SH, QD12, max UDMA/100
> > [ 4.229433] ata2.00: configured for UDMA/100
> > [ 4.237021] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A4SH QD12 PQ: 0 ANSI: 5
> > [ 4.246399] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> > [ 4.246550] cdrom: Uniform CD-ROM driver Revision: 3.20
> > [ 4.246988] sr 1:0:0:0: Attached scsi CD-ROM sr0
> > [ 4.247131] sr 1:0:0:0: Attached scsi generic sg1 type 5
> > [ 4.300085] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
> > [ 4.300197] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> > [ 4.300931] hub 2-1:1.0: USB hub found
> > [ 4.301202] hub 2-1:1.0: 8 ports detected
> > [ 4.371893] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
> > [ 4.469007] usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187
> > [ 4.469128] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> > [ 4.469271] usb 1-1.4: Product: DW375 Bluetooth Module
> > [ 4.469363] usb 1-1.4: Manufacturer: Dell Computer Corp
> > [ 4.469457] usb 1-1.4: SerialNumber: 446D57C904C4
> > [ 4.540007] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
> > [ 4.563885] ata4: SATA link down (SStatus 0 SControl 300)
> > [ 4.682036] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=6433
> > [ 4.682139] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
> > [ 4.682284] usb 1-1.5: Product: Laptop_Integrated_Webcam_HD
> > [ 4.682377] usb 1-1.5: Manufacturer: CN018T967248725OB3W9A01
> > [ 4.760066] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
> > [ 4.858757] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c050
> > [ 4.858857] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [ 4.859004] usb 2-1.3: Product: USB-PS/2 Optical Mouse
> > [ 4.859096] usb 2-1.3: Manufacturer: Logitech
> > [ 4.863980] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
> > [ 4.864330] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3/input0
> > [ 4.884108] ata5: SATA link down (SStatus 0 SControl 300)
> > [ 4.936259] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
> > [ 5.014611] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6
> > [ 5.027851] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
> > [ 5.051361] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5801
> > [ 5.051461] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> > [ 5.051607] usb 2-1.8: Product: 5880
> > [ 5.051697] usb 2-1.8: Manufacturer: Broadcom Corp
> > [ 5.051789] usb 2-1.8: SerialNumber: 0123456789ABCD
> > [ 5.052073] usb 2-1.8: config 0 descriptor??
> > [ 5.204318] ata6: SATA link down (SStatus 0 SControl 300)
> > [ 5.204506] PM: Hibernation image partition 8:8 present
> > [ 5.204508] PM: Looking for hibernation image.
> > [ 5.205878] PM: Image not found (code -22)
> > [ 5.205881] PM: Hibernation image not present or could not be loaded.
> > [ 5.205903] registered taskstats version 1
> > [ 5.208227] netpoll: netconsole: local port 6665
> > [ 5.208323] netpoll: netconsole: local IPv4 address 10.100.13.132
> > [ 5.208420] netpoll: netconsole: interface 'eth0'
> > [ 5.208513] netpoll: netconsole: remote port 6666
> > [ 5.208609] netpoll: netconsole: remote IPv4 address 10.100.13.54
> > [ 5.208706] netpoll: netconsole: remote ethernet address 00:19:d1:e4:e8:5a
> > [ 5.208805] netpoll: netconsole: device eth0 not up yet, forcing it
> > [ 5.342403] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
> > [ 5.444508] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
> > [ 5.444661] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> > [ 8.355414] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
> > [ 8.355598] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> > [ 8.360342] console [netcon0] enabled
> > [ 8.360443] netconsole: network logging started
> > [ 8.361094] debug: unmapping init [mem 0xffffffff81aa4000-0xffffffff81b9efff]
> > [ 8.361227] Write protecting the kernel read-only data: 10240k
> > [ 8.361486] debug: unmapping init [mem 0xffff88000148f000-0xffff8800015fffff]
> > [ 8.361645] debug: unmapping init [mem 0xffff880001831000-0xffff8800019fffff]
> > [ 8.595407] PM: Starting manual resume from disk
> > [ 8.595554] PM: Hibernation image partition 8:8 present
> > [ 8.595555] PM: Looking for hibernation image.
> > [ 8.595763] PM: Image not found (code -22)
> > [ 8.595765] PM: Hibernation image not present or could not be loaded.
> > [ 8.598685] PM: Marking nosave pages: [mem 0x0009a000-0x000fffff]
> > [ 8.598689] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
> > [ 8.598696] PM: Marking nosave pages: [mem 0x40000000-0x401fffff]
> > [ 8.598702] PM: Marking nosave pages: [mem 0xcaa29000-0xcaa6cfff]
> > [ 8.598704] PM: Marking nosave pages: [mem 0xcadb7000-0xcaffefff]
> > [ 8.598711] PM: Marking nosave pages: [mem 0xcb000000-0xffffffff]
> > [ 8.599307] PM: Basic memory bitmaps created
> > [ 8.613950] PM: Basic memory bitmaps freed
> > [ 8.776563] udevd[1754]: starting version 175
> > [ 8.881628] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
> > [ 8.881877] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 8.889565] sdhci: Secure Digital Host Controller Interface driver
> > [ 8.889665] sdhci: Copyright(c) Pierre Ossman
> > [ 8.890381] sdhci-pci 0000:0a:00.0: SDHCI controller found [1217:8221] (rev 5)
> > [ 8.892493] mmc0: SDHCI controller on PCI [0000:0a:00.0] using DMA
> > [ 8.906348] cfg80211: Calling CRDA to update world regulatory domain
> > [ 8.913314] Intel(R) Wireless WiFi driver for Linux, in-tree:
> > [ 8.913415] Copyright(c) 2003-2013 Intel Corporation
> > [ 8.913830] iwlwifi 0000:02:00.0: irq 42 for MSI/MSI-X
> > [ 8.916956] media: Linux media interface: v0.10
> > [ 8.919813] Linux video capture interface: v2.00
> > [ 8.930964] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:6433)
> > [ 8.969881] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
> > [ 9.010625] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
> > [ 9.010821] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> > [ 9.010998] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> > [ 9.011174] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> > [ 9.011347] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> > [ 9.011523] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> > [ 9.011696] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
> > [ 9.083207] iwlwifi 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
> > [ 9.091475] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
> > [ 9.091580] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
> > [ 9.091679] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
> > [ 9.091774] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
> > [ 9.091867] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P enabled
> > [ 9.091962] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
> > [ 9.092184] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
> > [ 9.105065] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
> > [ 9.551529] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15
> > [ 9.551739] usbcore: registered new interface driver uvcvideo
> > [ 9.551838] USB Video Class driver (1.1.1)
> > [ 9.699282] Adding 1535996k swap on /dev/sda8. Priority:-1 extents:1 across:1535996k SS
> > [ 10.348146] fuse init (API version 7.22)
> > [ 10.844406] EXT3-fs: barriers not enabled
> > [ 10.844707] kjournald starting. Commit interval 5 seconds
> > [ 10.844818] EXT3-fs (sda7): using internal journal
> > [ 10.844918] EXT3-fs (sda7): mounted filesystem with writeback data mode
> > [ 10.855294] EXT3-fs: barriers not enabled
> > [ 10.855490] kjournald starting. Commit interval 5 seconds
> > [ 10.855594] EXT3-fs (sda9): using internal journal
> > [ 10.855696] EXT3-fs (sda9): mounted filesystem with writeback data mode
> > [ 10.864546] EXT3-fs: barriers not enabled
> > [ 10.864787] kjournald starting. Commit interval 5 seconds
> > [ 10.864893] EXT3-fs (sda5): using internal journal
> > [ 10.864994] EXT3-fs (sda5): mounted filesystem with writeback data mode
> > [ 10.873827] EXT3-fs: barriers not enabled
> > [ 10.874065] kjournald starting. Commit interval 5 seconds
> > [ 10.874169] EXT3-fs (sda6): using internal journal
> > [ 10.874270] EXT3-fs (sda6): mounted filesystem with writeback data mode
> > [ 11.822545] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
> > [ 11.822854] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
> > [ 12.170958] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
> > [ 12.171305] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
> > [ 12.402822] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> > [ 12.826591] [drm] Initialized drm 1.1.0 20060810
> > [ 12.841869] [drm] Memory usable by graphics device = 2048M
> > [ 12.841884] i915 0000:00:02.0: setting latency timer to 64
> > [ 12.856066] i915 0000:00:02.0: irq 44 for MSI/MSI-X
> > [ 12.856074] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> > [ 12.856324] [drm] Driver supports precise vblank timestamp query.
> > [ 12.856493] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> > [ 12.888594] [drm] Wrong MCH_SSKPD value: 0x16040307
> > [ 12.888604] [drm] This can cause pipe underruns and display issues.
> > [ 12.888607] [drm] Please upgrade your BIOS to fix this.
> > [ 12.903479] fbcon: inteldrmfb (fb0) is primary device
> > [ 12.903574] Console: switching to colour frame buffer device 170x48
> > [ 12.903589] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> > [ 12.903592] i915 0000:00:02.0: registered panic notifier
> > [ 13.369936] acpi device:37: registered as cooling_device2
> > [ 13.525926] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> > [ 13.526000] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16
> > [ 13.526049] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> > [ 14.830827] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>
>
> --
> Michal Hocko
> SUSE Labs
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: 3.10-rc1 system starts regular boot when waking from s2ram
2013-05-17 12:11 ` Rafael J. Wysocki
@ 2013-05-17 12:09 ` Michal Hocko
2013-05-17 12:23 ` Rafael J. Wysocki
0 siblings, 1 reply; 38+ messages in thread
From: Michal Hocko @ 2013-05-17 12:09 UTC (permalink / raw)
To: H. Peter Anvin
Cc: linux-pm, Len Brown, Pavel Machek, LKML, Rafael J. Wysocki,
Fernando Luis Vázquez Cao, x86, Linus Torvalds
On Fri 17-05-13 14:11:26, Rafael J. Wysocki wrote:
> On Friday, May 17, 2013 09:54:46 AM Michal Hocko wrote:
> > On Wed 15-05-13 11:56:08, Michal Hocko wrote:
> > > OK, I have bisected it to 78d77df7 (x86-64, init: Do not set NX bits on
> > > non-NX capable hardware). Reverting the patch on top of 3.10-rc1 fixes
> > > the issue for me and the machine resumes just fine.
> > >
> > > Let's add involved people to the CC.
> > >
> > > The original message with the confing and dmesg is bellow.
> >
> > Anybody had chance to look at this? I am quite surprised that something
> > that is in init code might influence resume from suspend path. Or is it
> > just a side effect of some other changes in that area?
> >
> > <goes and checks the latest 3.9 stable which has the backport of the patch>
> >
> > Yes the latest stable is affected as well!
>
> Well, I suppose there will be more response if you send a revert request to
> Linus.
Maybe the patch should be reverted in the stable tree right now - I am
not sure about all the consequences as from reading the changelog I do
not understand which bug the patch is supposed to fix.
I would like to understand why the patch breaks my setup though. Peter?
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: 3.10-rc1 system starts regular boot when waking from s2ram
2013-05-17 7:54 ` Michal Hocko
@ 2013-05-17 12:11 ` Rafael J. Wysocki
2013-05-17 12:09 ` Michal Hocko
0 siblings, 1 reply; 38+ messages in thread
From: Rafael J. Wysocki @ 2013-05-17 12:11 UTC (permalink / raw)
To: Michal Hocko
Cc: linux-pm, Len Brown, Pavel Machek, LKML, H. Peter Anvin,
Fernando Luis Vázquez Cao, x86, Linus Torvalds
On Friday, May 17, 2013 09:54:46 AM Michal Hocko wrote:
> On Wed 15-05-13 11:56:08, Michal Hocko wrote:
> > OK, I have bisected it to 78d77df7 (x86-64, init: Do not set NX bits on
> > non-NX capable hardware). Reverting the patch on top of 3.10-rc1 fixes
> > the issue for me and the machine resumes just fine.
> >
> > Let's add involved people to the CC.
> >
> > The original message with the confing and dmesg is bellow.
>
> Anybody had chance to look at this? I am quite surprised that something
> that is in init code might influence resume from suspend path. Or is it
> just a side effect of some other changes in that area?
>
> <goes and checks the latest 3.9 stable which has the backport of the patch>
>
> Yes the latest stable is affected as well!
Well, I suppose there will be more response if you send a revert request to
Linus.
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: 3.10-rc1 system starts regular boot when waking from s2ram
2013-05-17 12:09 ` Michal Hocko
@ 2013-05-17 12:23 ` Rafael J. Wysocki
2013-05-17 12:30 ` Michal Hocko
0 siblings, 1 reply; 38+ messages in thread
From: Rafael J. Wysocki @ 2013-05-17 12:23 UTC (permalink / raw)
To: Michal Hocko
Cc: H. Peter Anvin, linux-pm, Len Brown, Pavel Machek, LKML,
Fernando Luis Vázquez Cao, x86, Linus Torvalds
On Friday, May 17, 2013 02:09:30 PM Michal Hocko wrote:
> On Fri 17-05-13 14:11:26, Rafael J. Wysocki wrote:
> > On Friday, May 17, 2013 09:54:46 AM Michal Hocko wrote:
> > > On Wed 15-05-13 11:56:08, Michal Hocko wrote:
> > > > OK, I have bisected it to 78d77df7 (x86-64, init: Do not set NX bits on
> > > > non-NX capable hardware). Reverting the patch on top of 3.10-rc1 fixes
> > > > the issue for me and the machine resumes just fine.
> > > >
> > > > Let's add involved people to the CC.
> > > >
> > > > The original message with the confing and dmesg is bellow.
> > >
> > > Anybody had chance to look at this? I am quite surprised that something
> > > that is in init code might influence resume from suspend path. Or is it
> > > just a side effect of some other changes in that area?
> > >
> > > <goes and checks the latest 3.9 stable which has the backport of the patch>
> > >
> > > Yes the latest stable is affected as well!
> >
> > Well, I suppose there will be more response if you send a revert request to
> > Linus.
>
> Maybe the patch should be reverted in the stable tree right now
No, it doesn't work like that. It won't be reverted in -stable before it is
reverted in the Linus' tree.
> - I am not sure about all the consequences as from reading the changelog
> I do not understand which bug the patch is supposed to fix.
That really doesn't matter. If it breaks things, it is a revert candidate
regardless.
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: 3.10-rc1 system starts regular boot when waking from s2ram
2013-05-17 12:23 ` Rafael J. Wysocki
@ 2013-05-17 12:30 ` Michal Hocko
0 siblings, 0 replies; 38+ messages in thread
From: Michal Hocko @ 2013-05-17 12:30 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: H. Peter Anvin, linux-pm, Len Brown, Pavel Machek, LKML,
Fernando Luis Vázquez Cao, x86, Linus Torvalds
On Fri 17-05-13 14:23:51, Rafael J. Wysocki wrote:
> On Friday, May 17, 2013 02:09:30 PM Michal Hocko wrote:
> > On Fri 17-05-13 14:11:26, Rafael J. Wysocki wrote:
> > > On Friday, May 17, 2013 09:54:46 AM Michal Hocko wrote:
> > > > On Wed 15-05-13 11:56:08, Michal Hocko wrote:
> > > > > OK, I have bisected it to 78d77df7 (x86-64, init: Do not set NX bits on
> > > > > non-NX capable hardware). Reverting the patch on top of 3.10-rc1 fixes
> > > > > the issue for me and the machine resumes just fine.
> > > > >
> > > > > Let's add involved people to the CC.
> > > > >
> > > > > The original message with the confing and dmesg is bellow.
> > > >
> > > > Anybody had chance to look at this? I am quite surprised that something
> > > > that is in init code might influence resume from suspend path. Or is it
> > > > just a side effect of some other changes in that area?
> > > >
> > > > <goes and checks the latest 3.9 stable which has the backport of the patch>
> > > >
> > > > Yes the latest stable is affected as well!
> > >
> > > Well, I suppose there will be more response if you send a revert request to
> > > Linus.
> >
> > Maybe the patch should be reverted in the stable tree right now
>
> No, it doesn't work like that. It won't be reverted in -stable before it is
> reverted in the Linus' tree.
>
> > - I am not sure about all the consequences as from reading the changelog
> > I do not understand which bug the patch is supposed to fix.
>
> That really doesn't matter. If it breaks things, it is a revert candidate
> regardless.
OK, if there is no progress on this I will send the revert during the
weekend. It doesn't seem that many people would be affected ATM.
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-14 16:01 3.10-rc1 system starts regular boot when waking from s2ram Michal Hocko
` (2 preceding siblings ...)
2013-05-15 13:17 ` Victor Miasnikov
@ 2013-05-20 15:03 ` Michal Hocko
2013-05-20 15:58 ` H. Peter Anvin
3 siblings, 1 reply; 38+ messages in thread
From: Michal Hocko @ 2013-05-20 15:03 UTC (permalink / raw)
To: Linus Torvalds
Cc: H. Peter Anvin, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, x86, linux-pm, linux-kernel
This reverts commit 78d77df71510a96e042de7ba6dbd7998103642cb because
it breaks resume from suspend to ram. Git bisect pointed to this patch
and the revert fixes the problem.
There are no error messages neither during suspend not on resume when
the machine simply starts booting as if it wasn't suspended in RAM at
all.
References: https://lkml.org/lkml/2013/5/14/398
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Michal Hocko <mhocko@suse.cz>
---
arch/x86/kernel/head64.c | 3 +--
arch/x86/kernel/head_64.S | 1 -
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index dab95a8..101ac1a9 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -34,7 +34,6 @@
extern pgd_t early_level4_pgt[PTRS_PER_PGD];
extern pmd_t early_dynamic_pgts[EARLY_DYNAMIC_PAGE_TABLES][PTRS_PER_PMD];
static unsigned int __initdata next_early_pgt = 2;
-pmdval_t __initdata early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
/* Wipe all early page tables except for the kernel symbol map */
static void __init reset_early_page_tables(void)
@@ -100,7 +99,7 @@ again:
pmd_p[i] = 0;
*pud_p = (pudval_t)pmd_p - __START_KERNEL_map + phys_base + _KERNPG_TABLE;
}
- pmd = (physaddr & PMD_MASK) + early_pmd_flags;
+ pmd = (physaddr & PMD_MASK) + (__PAGE_KERNEL_LARGE & ~_PAGE_GLOBAL);
pmd_p[pmd_index(address)] = pmd;
return 0;
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 08f7e80..6859e96 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -200,7 +200,6 @@ ENTRY(secondary_startup_64)
btl $20,%edi /* No Execute supported? */
jnc 1f
btsl $_EFER_NX, %eax
- btsq $_PAGE_BIT_NX,early_pmd_flags(%rip)
1: wrmsr /* Make changes effective */
/* Setup cr0 */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 38+ messages in thread
* Re: [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-20 15:03 ` [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware" Michal Hocko
@ 2013-05-20 15:58 ` H. Peter Anvin
2013-05-20 16:43 ` Michal Hocko
0 siblings, 1 reply; 38+ messages in thread
From: H. Peter Anvin @ 2013-05-20 15:58 UTC (permalink / raw)
To: Michal Hocko
Cc: Linus Torvalds, H. Peter Anvin, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, x86, linux-pm, linux-kernel
On 05/20/2013 08:03 AM, Michal Hocko wrote:
> This reverts commit 78d77df71510a96e042de7ba6dbd7998103642cb because
> it breaks resume from suspend to ram. Git bisect pointed to this patch
> and the revert fixes the problem.
>
> There are no error messages neither during suspend not on resume when
> the machine simply starts booting as if it wasn't suspended in RAM at
> all.
Machine details and configuration, please? This is one of a series of
extremely bizarre suspend to RAM failures we are trying to make sense
of... in this case, it means that somehow switching from setting the NX
bit conditionally to unconditionally somehow fixes suspend to RAM!
Needless to say, this is not just bizarre, this is extremely disturbing.
-hpa
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-20 15:58 ` H. Peter Anvin
@ 2013-05-20 16:43 ` Michal Hocko
2013-05-20 17:21 ` Linus Torvalds
0 siblings, 1 reply; 38+ messages in thread
From: Michal Hocko @ 2013-05-20 16:43 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Linus Torvalds, H. Peter Anvin, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, x86, linux-pm, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1148 bytes --]
On Mon 20-05-13 08:58:55, H. Peter Anvin wrote:
> On 05/20/2013 08:03 AM, Michal Hocko wrote:
> > This reverts commit 78d77df71510a96e042de7ba6dbd7998103642cb because
> > it breaks resume from suspend to ram. Git bisect pointed to this patch
> > and the revert fixes the problem.
> >
> > There are no error messages neither during suspend not on resume when
> > the machine simply starts booting as if it wasn't suspended in RAM at
> > all.
>
> Machine details and configuration, please?
The configuration has been posted in the referenced thread:
https://lkml.org/lkml/2013/5/14/398
dmicode and lspci -vvv are attached. What else you would be interested
in?
> This is one of a series of
> extremely bizarre suspend to RAM failures we are trying to make sense
> of... in this case, it means that somehow switching from setting the NX
> bit conditionally to unconditionally somehow fixes suspend to RAM!
Yes I was really surprised when I bisected to the patch. I was wondering
how an init code could influence s2ram...
>
> Needless to say, this is not just bizarre, this is extremely disturbing.
>
> -hpa
>
>
--
Michal Hocko
SUSE Labs
[-- Attachment #2: dmidecode --]
[-- Type: text/plain, Size: 28506 bytes --]
# dmidecode 2.12
SMBIOS 2.6 present.
105 structures occupying 4588 bytes.
Table at 0x000F1D80.
Handle 0xDA00, DMI type 218, 251 bytes
OEM-specific Type
Header and Data:
DA FB 00 DA B2 00 37 5F 1F 36 40 05 00 05 00 03
00 06 00 06 00 05 00 07 00 07 00 00 00 0B 00 0B
00 01 00 0C 00 0C 00 02 00 0D 00 0D 00 03 00 0F
00 0F 00 00 00 11 00 11 00 02 00 12 00 12 00 04
00 28 00 28 00 00 00 29 00 29 00 01 00 2A 00 2A
00 02 00 2B 00 2B 00 FF FF 2C 00 2C 00 FF FF 2D
00 2D 00 02 00 2E 00 2E 00 00 00 42 00 42 00 01
00 43 00 43 00 00 00 55 00 55 00 00 00 5C 00 5C
00 01 00 5D 00 5D 00 00 00 65 00 65 00 00 00 66
00 66 00 01 00 6D 00 6D 00 05 00 6E 00 6E 00 01
00 7D 00 7D 00 FF FF 93 00 93 00 01 00 94 00 94
00 00 00 9B 00 9B 00 01 00 9C 00 9C 00 00 00 9F
00 9F 00 00 00 A0 00 A0 00 01 00 A1 00 A1 00 00
00 A3 00 A3 00 01 00 D1 00 D1 00 01 00 D2 00 D2
00 00 00 E4 00 E4 00 01 00 E5 00 E5 00 00 00 EA
00 EA 00 00 00 FF FF FF FF 00 00
Handle 0xDA01, DMI type 218, 251 bytes
OEM-specific Type
Header and Data:
DA FB 01 DA B2 00 37 5F 1F 36 40 EB 00 EB 00 01
00 EC 00 EC 00 02 00 ED 00 ED 00 00 00 F0 00 F0
00 01 00 F1 00 F1 00 00 00 F2 00 F2 00 01 00 F3
00 F3 00 02 00 FB 00 FB 00 02 00 FC 00 FC 00 00
00 09 01 09 01 02 00 0E 01 0E 01 01 00 0F 01 0F
01 00 00 10 01 10 01 01 00 11 01 11 01 00 00 17
01 17 01 00 00 18 01 18 01 01 00 19 01 19 01 00
00 1A 01 1A 01 01 00 1F 01 1F 01 00 00 20 01 20
01 01 00 21 01 21 01 00 00 22 01 22 01 01 00 2D
01 2D 01 01 00 2E 01 2E 01 00 00 35 01 35 01 FF
00 37 01 37 01 00 00 38 01 38 01 01 00 39 01 39
01 02 00 40 01 40 01 00 00 41 01 41 01 01 00 44
01 44 01 00 00 45 01 45 01 01 00 46 01 46 01 00
00 47 01 47 01 01 00 4A 01 4A 01 00 00 4B 01 4B
01 01 00 52 01 52 01 01 00 53 01 53 01 00 00 75
01 75 01 02 00 FF FF FF FF 00 00
Handle 0xDA02, DMI type 218, 251 bytes
OEM-specific Type
Header and Data:
DA FB 02 DA B2 00 37 5F 1F 36 40 76 01 76 01 01
00 7B 01 7B 01 00 00 7C 01 7C 01 01 00 7F 01 7F
01 00 00 80 01 80 01 01 00 81 01 81 01 00 00 82
01 82 01 01 00 83 01 83 01 00 00 84 01 84 01 01
00 85 01 85 01 00 00 86 01 86 01 01 00 89 01 89
01 00 00 8A 01 8A 01 01 00 93 01 93 01 00 00 94
01 94 01 01 00 98 01 98 01 04 00 9B 01 9B 01 00
00 9C 01 9C 01 01 00 C1 01 C1 01 00 00 C2 01 C2
01 02 00 C3 01 C3 01 01 00 D8 01 D8 01 00 00 D9
01 D9 01 01 00 DE 01 DE 01 00 00 DF 01 DF 01 01
00 E1 01 E1 01 00 00 EA 01 EA 01 00 00 EB 01 EB
01 01 00 02 02 02 02 00 00 03 02 03 02 01 00 04
02 04 02 00 00 05 02 05 02 01 00 16 02 16 02 06
00 28 02 28 02 02 00 29 02 29 02 01 00 32 02 32
02 02 00 33 02 33 02 01 00 44 02 44 02 01 00 45
02 45 02 00 00 FF FF FF FF 00 00
Handle 0xDA03, DMI type 218, 251 bytes
OEM-specific Type
Header and Data:
DA FB 03 DA B2 00 37 5F 1F 36 40 4A 02 4A 02 01
00 4B 02 4B 02 01 00 4C 02 4C 02 00 00 64 02 64
02 01 00 65 02 65 02 00 00 66 02 66 02 01 00 67
02 67 02 00 00 68 02 68 02 01 00 69 02 69 02 00
00 6C 02 6C 02 01 00 6D 02 6D 02 00 00 6E 02 6E
02 00 00 85 02 85 02 01 00 86 02 86 02 00 00 94
02 94 02 01 00 95 02 95 02 00 00 A5 02 A5 02 01
00 A6 02 A6 02 00 00 A7 02 A7 02 01 00 A8 02 A8
02 00 00 B4 02 B4 02 01 00 B5 02 B5 02 00 00 BD
02 BD 02 01 00 BE 02 BE 02 00 00 CD 02 CD 02 01
00 D8 02 D8 02 FF FF D9 02 D9 02 FF FF DA 02 DA
02 FF FF DB 02 DB 02 FF FF DC 02 DC 02 FF FF DD
02 DD 02 FF FF DE 02 DE 02 FF FF DF 02 DF 02 FF
FF E3 02 E3 02 01 00 E8 02 E8 02 01 00 E9 02 E9
02 00 00 EA 02 EA 02 05 00 EB 02 EB 02 06 00 EC
02 EC 02 07 00 FF FF FF FF 00 00
Handle 0xDA04, DMI type 218, 197 bytes
OEM-specific Type
Header and Data:
DA C5 04 DA B2 00 37 5F 1F 36 40 ED 02 ED 02 01
00 EE 02 EE 02 00 00 F6 02 F6 02 08 00 12 03 12
03 03 00 13 03 13 03 01 00 14 03 14 03 00 00 15
03 15 03 01 00 16 03 16 03 00 00 17 03 17 03 01
00 18 03 18 03 00 00 19 03 19 03 01 00 1A 03 1A
03 00 00 1B 03 1B 03 01 00 1C 03 1C 03 00 00 1D
03 1D 03 01 00 1E 03 1E 03 00 00 1F 03 1F 03 01
00 20 03 20 03 00 00 25 03 25 03 01 00 26 03 26
03 01 00 29 03 29 03 01 00 2A 03 2A 03 00 00 2B
03 2B 03 01 00 2C 03 2C 03 00 00 0C 80 0C 80 00
00 04 A0 04 A0 01 00 01 F0 01 F0 55 00 03 F0 03
F0 03 00 06 F0 06 F0 7F 00 07 F0 07 F0 00 00 FF
FF FF FF 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A08
Release Date: 10/18/2011
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 2048 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 4.6
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: Latitude E6320
Version: 01
Serial Number: 60D3GV1
UUID: 4C4C4544-0030-4410-8033-B6C04F475631
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 09PHH9
Version: A00
Serial Number: /60D3GV1/CN1296127L0090/
Asset Tag: Not Specified
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Not Specified
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Laptop
Lock: Not Present
Version: Not Specified
Serial Number: 60D3GV1
Asset Tag: Not Specified
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0004, DMI type 4, 42 bytes
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Core i5
Manufacturer: Intel
ID: A7 06 02 00 FF FB EB BF
Signature: Type 0, Family 6, Model 42, Stepping 7
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Core(TM) i5-2540M CPU @ 2.60GH
Voltage: 0.0 V
External Clock: 100 MHz
Max Speed: 4000 MHz
Current Speed: 2600 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 256 kB
Maximum Size: 256 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0007, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3-Cache
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 3072 kB
Maximum Size: 3072 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: Other
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A2B
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1F2
Internal Connector Type: None
External Reference Designator: AC IN
External Connector Type: Other
Port Type: Other
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A2
Internal Connector Type: None
External Reference Designator: HDMI
External Connector Type: Other
Port Type: Video Port
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A3
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A3
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A3
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4A1
Internal Connector Type: None
External Reference Designator: LAN
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J7J1
Internal Connector Type: None
External Reference Designator: eSATA Port
External Connector Type: SAS/SATA Plug Receptacle
Port Type: SATA
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8A1
Internal Connector Type: None
External Reference Designator: FireWire
External Connector Type: IEEE 1394
Port Type: Firewire (IEEE P1394)
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9A1
Internal Connector Type: None
External Reference Designator: Docking
External Connector Type: Other
Port Type: Other
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8A2
Internal Connector Type: None
External Reference Designator: Modem
External Connector Type: RJ-11
Port Type: Modem Port
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A3
Internal Connector Type: None
External Reference Designator: USB4
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4A1
Internal Connector Type: None
External Reference Designator: USB5
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4A1
Internal Connector Type: None
External Reference Designator: USB6
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS2Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A2A
Internal Connector Type: None
External Reference Designator: Serial Port
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J5B1 - PCH JTAG
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9A1 - TPM/PORT 80
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2G1 - CPU Fan
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4V1 - Memory Slot 1
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4V2 - Memory Slot 2
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E5 - LPC Hot Docking
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9G2 - LPC SIDE BAND
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0020, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E4 - HDA 2X8 Header
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8E1 - SPI Program
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0022, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8F2 - LPC Slot
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0023, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8H3 - PCH XDP
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0024, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J7G1 - SATA Port 2
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0025, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J7G2 - SATA Port 1
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0026, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6H1 - SATA Power
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0027, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J5J1 - FP Header
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0028, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4H1 - ATX Power
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0029, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1J3 - AVMC
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x002A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1H1 - BATT B
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x002B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1H2 - BATT A
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x002C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1D3 - XDP
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x002D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4C1 - FAN PWR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x002E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E7 - HDA 8Pin Header
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x002F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8F1 - HDA HDMI
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0030, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E3 - Scan Matrix Keyboard
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0031, DMI type 9, 17 bytes
System Slot Information
Designation: J5C1
Type: x16 PCI Express x16
Current Usage: In Use
Length: Long
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:00.0
Handle 0x0032, DMI type 9, 17 bytes
System Slot Information
Designation: J6C2
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:00.0
Handle 0x0033, DMI type 9, 17 bytes
System Slot Information
Designation: J6D2
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:00.0
Handle 0x0034, DMI type 9, 17 bytes
System Slot Information
Designation: J7C1
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:00.0
Handle 0x0035, DMI type 9, 17 bytes
System Slot Information
Designation: J7D2
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 4
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:00.0
Handle 0x0036, DMI type 9, 17 bytes
System Slot Information
Designation: J6C1
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 5
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:00.0
Handle 0x0037, DMI type 9, 17 bytes
System Slot Information
Designation: J8C2
Type: 32-bit PCI Express x16
Current Usage: In Use
Length: Long
ID: 6
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:00.0
Handle 0x0038, DMI type 9, 17 bytes
System Slot Information
Designation: J6UB
Type: x16 PCI Express x16
Current Usage: In Use
Length: Long
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:00.0
Handle 0x0039, DMI type 9, 17 bytes
System Slot Information
Designation: J15BU
Type: x4 PCI Express
Current Usage: In Use
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:00.0
Handle 0x003A, DMI type 9, 17 bytes
System Slot Information
Designation: J13BU
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:00.0
Handle 0x003B, DMI type 9, 17 bytes
System Slot Information
Designation: J20BU
Type: 32-bit PCI
Current Usage: In Use
Length: Short
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:01.0
Handle 0x003C, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: "Intel HD Graphics"
Handle 0x003D, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Disabled
Description: NETWORK_NAME_STRING
Handle 0x003E, DMI type 11, 5 bytes
OEM Strings
String 1: Dell System
String 2: 1[0492]
String 3: 3[1.0]
String 4: 12[www.dell.com]
Handle 0x003F, DMI type 12, 5 bytes
System Configuration Options
Option 1: To Be Filled By O.E.M.
Handle 0x0040, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0041, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 16 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0042, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0041
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: SODIMM
Set: None
Locator: ChannelA-DIMM0
Bank Locator: BANK 0
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MHz
Manufacturer: Samsung
Serial Number: 6255F32B
Asset Tag: 9876543210
Part Number: M471B5273DH0-CH9
Rank: 2
Handle 0x0044, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0041
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: ChannelB-DIMM0
Bank Locator: BANK 2
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: [Empty]
Serial Number: [Empty]
Asset Tag: 9876543210
Part Number: [Empty]
Rank: Unknown
Handle 0x0045, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Array Handle: 0x0041
Partition Width: 2
Handle 0x0043, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Device Handle: 0x0042
Memory Array Mapped Address Handle: 0x0045
Partition Row Position: 1
Handle 0x0049, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Touch Pad
Interface: Bus Mouse
Buttons: 2
Handle 0x1600, DMI type 22, 26 bytes
Portable Battery
Location: Sys. Battery Bay
Manufacturer: Samsung SDI
Manufacture Date: 05/18/2012
Serial Number: 4B99
Name: DELL PCV5M25
Design Capacity: 58830 mWh
Design Voltage: 11100 mV
SBDS Version: 1.0
Maximum Error: 32%
SBDS Chemistry: LION
OEM-specific Information: 0x00000001
Handle 0x004E, DMI type 26, 22 bytes
Voltage Probe
Description: LM78A
Location: Unknown
Status: Unknown
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x1B00, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1C00, DMI type 28, 20 bytes
Temperature Probe
Description: CPU Internal Temperature
Location: Processor
Status: OK
Maximum Value: 127.0 deg C
Minimum Value: 0.0 deg C
Resolution: 1.000 deg C
Tolerance: 0.5 deg C
Accuracy: Unknown
OEM-specific Information: 0x0000DC00
Handle 0x0052, DMI type 29, 22 bytes
Electrical Current Probe
Description: ABC
Location: Unknown
Status: Unknown
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x004C, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x004D, DMI type 34, 11 bytes
Management Device
Description: LM78-1
Type: LM78
Address: 0x00000000
Address Type: I/O Port
Handle 0x0053, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard IGD
Type: Video
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:02.0
Handle 0x0054, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard LAN
Type: Ethernet
Status: Disabled
Type Instance: 1
Bus Address: 0000:00:19.0
Handle 0x0055, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard Audio
Type: Sound
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:1b.0
Handle 0x1601, DMI type 126, 26 bytes
Inactive
Handle 0x1602, DMI type 126, 26 bytes
Inactive
Handle 0xB100, DMI type 177, 12 bytes
OEM-specific Type
Header and Data:
B1 0C 00 B1 1A 00 00 00 00 00 00 00
Handle 0xB200, DMI type 178, 76 bytes
OEM-specific Type
Header and Data:
B2 4C 00 B2 07 01 0C 00 08 01 0A 00 09 01 0B 00
3B 00 20 00 42 00 18 00 48 00 14 00 50 00 13 00
10 00 FF 00 11 00 FF 00 12 00 FF 00 13 00 FF 00
14 00 FF 00 1E 00 FF 00 1F 00 FF 00 20 00 FF 00
21 00 FF 00 22 00 FF 00 4D 00 16 00
Strings:
Handle 0xD000, DMI type 208, 16 bytes
OEM-specific Type
Header and Data:
D0 10 00 D0 02 05 FE 00 92 04 01 02 00 00 00 00
Strings:
20120721
20120725
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 00 00 00 03 04 0F 80 03
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 00 00 00 03 06 80 04 03
Handle 0xD800, DMI type 216, 9 bytes
OEM-specific Type
Header and Data:
D8 09 00 D8 01 02 01 10 01
Strings:
"Intel Corp."
"2089"
Handle 0xD900, DMI type 217, 8 bytes
OEM-specific Type
Header and Data:
D9 08 00 D9 01 02 01 03
Strings:
US-101
Proprietary
Handle 0xDB00, DMI type 219, 11 bytes
OEM-specific Type
Header and Data:
DB 0B 00 DB 03 01 02 03 FF 00 00
Strings:
System Device Bay
CD-ROM,CD-RW,DVD,DVD+RW,DVD+/-RW,Hard Disk
CD-ROM
Handle 0xDB01, DMI type 219, 11 bytes
OEM-specific Type
Header and Data:
DB 0B 01 DB 03 01 02 03 FF 00 00
Strings:
System eSATA Bay
CD-ROM,CD-RW,DVD,DVD+RW,DVD+/-RW,Hard Disk
EMPTY
Handle 0xDC00, DMI type 220, 20 bytes
OEM-specific Type
Header and Data:
DC 14 00 DC 01 F0 00 00 03 F0 00 00 00 00 06 F0
07 F0 00 00
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 00 00 00 00 03 00 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE 01 04 00 00 12 07 21 06 33 01 00 00
Handle 0x0056, DMI type 255, 6 bytes
OEM-specific Type
Header and Data:
FF 06 56 00 01 02
Strings:
_SIDARlU%XxJBZMZ
0492
Handle 0xDE01, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 01 DE 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0xDE02, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 02 DE 24 41 4D 54 01 01 01 01 01 A5 2F 02
00 00 01 00
Handle 0xDE03, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 03 DE 35 00 00 00 07 00 00 00 00 00 38 00
F8 00 4F 1C FF FF FF FF 09 E0 00 00 01 00 07 00
5F 04 14 00 00 00 00 00 C8 00 02 15 00 00 00 02
2B 42 00 00 B6 00 00 00 76 50 72 6F 00 00 00 00
Handle 0xDE04, DMI type 127, 4 bytes
End Of Table
[-- Attachment #3: lspci --]
[-- Type: text/plain, Size: 28836 bytes --]
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Dell Device 0492
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 0492
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at e1400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4152
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Dell Device 0492
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e2eb0000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) (prog-if 02 [16550])
Subsystem: Dell Device 0492
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 40e0 [size=8]
Region 1: Memory at e2e90000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Subsystem: Dell Device 0492
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at e2e00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e2e80000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4080 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4154
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device 0492
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e2e70000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Dell Device 0492
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at e2e60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41e3
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 0492
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e2d00000-e2dfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 0492
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e2200000-e2bfffff
Prefetchable memory behind bridge: 00000000e0a00000-00000000e13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 0492
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e1800000-e21fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 0492
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e2c00000-e2cfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #6, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #5, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 0492
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device 0492
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e2e50000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
Subsystem: Dell Device 0492
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 0492
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 40
Region 0: I/O ports at 40d0 [size=8]
Region 1: I/O ports at 40c0 [size=4]
Region 2: I/O ports at 40b0 [size=8]
Region 3: I/O ports at 40a0 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at e2e40000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4191
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Dell Device 0492
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e2e30000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4040 [size=32]
02:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at e2d00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 41c1
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 24-77-03-ff-ff-92-9a-c4
Kernel driver in use: iwlwifi
0a:00.0 SD Host controller: O2 Micro, Inc. Device 8221 (rev 05) (prog-if 01)
Subsystem: Dell Device 0492
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e2c00000 (32-bit, non-prefetchable) [size=512]
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [200 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: sdhci-pci
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-20 16:43 ` Michal Hocko
@ 2013-05-20 17:21 ` Linus Torvalds
2013-05-20 18:13 ` H. Peter Anvin
2013-05-20 18:23 ` Michal Hocko
0 siblings, 2 replies; 38+ messages in thread
From: Linus Torvalds @ 2013-05-20 17:21 UTC (permalink / raw)
To: Michal Hocko
Cc: H. Peter Anvin, H. Peter Anvin, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, the arch/x86 maintainers, linux-pm,
Linux Kernel Mailing List
On Mon, May 20, 2013 at 9:43 AM, Michal Hocko <mhocko@suse.cz> wrote:
>
> The configuration has been posted in the referenced thread:
> https://lkml.org/lkml/2013/5/14/398
Hmm. That's a regular intel i5 Sandybridge CPU. Which certainly has NX.
Hmm. secondary_startup_64 isn't __initcode, is it? I think it's used
for resuming the other CPU's too and for CPU hotplug. Yes/no?
If so early_pmd_flags shouldn't be __initdata, I think.
Michal, does it work if you don't do the revert, but just remove the
__initdata instead?
Linus
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-20 17:21 ` Linus Torvalds
@ 2013-05-20 18:13 ` H. Peter Anvin
2013-05-20 18:18 ` Linus Torvalds
2013-05-20 18:23 ` Michal Hocko
1 sibling, 1 reply; 38+ messages in thread
From: H. Peter Anvin @ 2013-05-20 18:13 UTC (permalink / raw)
To: Linus Torvalds
Cc: Michal Hocko, H. Peter Anvin, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, the arch/x86 maintainers, linux-pm,
Linux Kernel Mailing List
On 05/20/2013 10:21 AM, Linus Torvalds wrote:
> On Mon, May 20, 2013 at 9:43 AM, Michal Hocko <mhocko@suse.cz> wrote:
>>
>> The configuration has been posted in the referenced thread:
>> https://lkml.org/lkml/2013/5/14/398
>
> Hmm. That's a regular intel i5 Sandybridge CPU. Which certainly has NX.
>
> Hmm. secondary_startup_64 isn't __initcode, is it? I think it's used
> for resuming the other CPU's too and for CPU hotplug. Yes/no?
>
> If so early_pmd_flags shouldn't be __initdata, I think.
>
> Michal, does it work if you don't do the revert, but just remove the
> __initdata instead?
>
Indeed. Looks like we corrupt a random bit in memory on resume.
-hpa
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-20 18:13 ` H. Peter Anvin
@ 2013-05-20 18:18 ` Linus Torvalds
2013-05-20 18:19 ` H. Peter Anvin
0 siblings, 1 reply; 38+ messages in thread
From: Linus Torvalds @ 2013-05-20 18:18 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Michal Hocko, H. Peter Anvin, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, the arch/x86 maintainers, linux-pm,
Linux Kernel Mailing List
On Mon, May 20, 2013 at 11:13 AM, H. Peter Anvin <hpa@linux.intel.com> wrote:
>
> Indeed. Looks like we corrupt a random bit in memory on resume.
Well, in this case, it's probably the DEBUG_PAGEALLOC that Michal has
enabled, which causes a page fault - and then a triple fault - at
secondary CPU startup. And the triple fault then results in a reboot.
Which explains the symptoms he gets.
Without DEBUG_PAGEALLOC it ends up being "just" a single-bit corruption, yes.
Linus
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-20 18:18 ` Linus Torvalds
@ 2013-05-20 18:19 ` H. Peter Anvin
0 siblings, 0 replies; 38+ messages in thread
From: H. Peter Anvin @ 2013-05-20 18:19 UTC (permalink / raw)
To: Linus Torvalds
Cc: Michal Hocko, H. Peter Anvin, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, the arch/x86 maintainers, linux-pm,
Linux Kernel Mailing List
On 05/20/2013 11:18 AM, Linus Torvalds wrote:
> On Mon, May 20, 2013 at 11:13 AM, H. Peter Anvin <hpa@linux.intel.com> wrote:
>>
>> Indeed. Looks like we corrupt a random bit in memory on resume.
>
> Well, in this case, it's probably the DEBUG_PAGEALLOC that Michal has
> enabled, which causes a page fault - and then a triple fault - at
> secondary CPU startup. And the triple fault then results in a reboot.
> Which explains the symptoms he gets.
>
> Without DEBUG_PAGEALLOC it ends up being "just" a single-bit corruption, yes.
>
Good, that explains what made it predictable. Score one for
DEBUG_PAGEALLOC.
-hpa
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-20 17:21 ` Linus Torvalds
2013-05-20 18:13 ` H. Peter Anvin
@ 2013-05-20 18:23 ` Michal Hocko
2013-05-20 18:30 ` H. Peter Anvin
` (2 more replies)
1 sibling, 3 replies; 38+ messages in thread
From: Michal Hocko @ 2013-05-20 18:23 UTC (permalink / raw)
To: Linus Torvalds
Cc: H. Peter Anvin, H. Peter Anvin, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, the arch/x86 maintainers, linux-pm,
Linux Kernel Mailing List
On Mon 20-05-13 10:21:09, Linus Torvalds wrote:
> On Mon, May 20, 2013 at 9:43 AM, Michal Hocko <mhocko@suse.cz> wrote:
> >
> > The configuration has been posted in the referenced thread:
> > https://lkml.org/lkml/2013/5/14/398
>
> Hmm. That's a regular intel i5 Sandybridge CPU. Which certainly has NX.
>
> Hmm. secondary_startup_64 isn't __initcode, is it? I think it's used
> for resuming the other CPU's too and for CPU hotplug. Yes/no?
>
> If so early_pmd_flags shouldn't be __initdata, I think.
>
> Michal, does it work if you don't do the revert, but just remove the
> __initdata instead?
Right you are! The following patch on top of your tree fixes the
problem. Thanks a lot. I will leave the proper changelog to somebody who
is more familiar with the area but AFAIU the real problem is that
early_pmd_flags is no longer available beacause the section is gone.
Anyway, feel free to add my
Tested-by: Michal Hocko <mhocko@suse.cz>
and mark it for 3.9 stable tree
---
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index dab95a8..55b6761 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -34,7 +34,7 @@
extern pgd_t early_level4_pgt[PTRS_PER_PGD];
extern pmd_t early_dynamic_pgts[EARLY_DYNAMIC_PAGE_TABLES][PTRS_PER_PMD];
static unsigned int __initdata next_early_pgt = 2;
-pmdval_t __initdata early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
+pmdval_t early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
/* Wipe all early page tables except for the kernel symbol map */
static void __init reset_early_page_tables(void)
--
Michal Hocko
SUSE Labs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* Re: [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-20 18:23 ` Michal Hocko
@ 2013-05-20 18:30 ` H. Peter Anvin
2013-05-20 18:31 ` Michal Hocko
2013-05-20 18:31 ` Linus Torvalds
2013-05-20 18:42 ` [tip:x86/urgent] x86-64: Make early_pmd_flags __cpuinitdata tip-bot for H. Peter Anvin
2013-05-20 18:50 ` tip-bot for H. Peter Anvin
2 siblings, 2 replies; 38+ messages in thread
From: H. Peter Anvin @ 2013-05-20 18:30 UTC (permalink / raw)
To: Michal Hocko
Cc: Linus Torvalds, H. Peter Anvin, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, the arch/x86 maintainers, linux-pm,
Linux Kernel Mailing List
On 05/20/2013 11:23 AM, Michal Hocko wrote:
> On Mon 20-05-13 10:21:09, Linus Torvalds wrote:
>> On Mon, May 20, 2013 at 9:43 AM, Michal Hocko <mhocko@suse.cz> wrote:
>>>
>>> The configuration has been posted in the referenced thread:
>>> https://lkml.org/lkml/2013/5/14/398
>>
>> Hmm. That's a regular intel i5 Sandybridge CPU. Which certainly has NX.
>>
>> Hmm. secondary_startup_64 isn't __initcode, is it? I think it's used
>> for resuming the other CPU's too and for CPU hotplug. Yes/no?
>>
>> If so early_pmd_flags shouldn't be __initdata, I think.
>>
>> Michal, does it work if you don't do the revert, but just remove the
>> __initdata instead?
>
> Right you are! The following patch on top of your tree fixes the
> problem. Thanks a lot. I will leave the proper changelog to somebody who
> is more familiar with the area but AFAIU the real problem is that
> early_pmd_flags is no longer available beacause the section is gone.
>
I'll write it up and send a pull request to Linus.
-hpa
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-20 18:30 ` H. Peter Anvin
@ 2013-05-20 18:31 ` Michal Hocko
2013-05-20 18:31 ` Linus Torvalds
1 sibling, 0 replies; 38+ messages in thread
From: Michal Hocko @ 2013-05-20 18:31 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Linus Torvalds, H. Peter Anvin, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, the arch/x86 maintainers, linux-pm,
Linux Kernel Mailing List
On Mon 20-05-13 11:30:31, H. Peter Anvin wrote:
> On 05/20/2013 11:23 AM, Michal Hocko wrote:
> > On Mon 20-05-13 10:21:09, Linus Torvalds wrote:
> >> On Mon, May 20, 2013 at 9:43 AM, Michal Hocko <mhocko@suse.cz> wrote:
> >>>
> >>> The configuration has been posted in the referenced thread:
> >>> https://lkml.org/lkml/2013/5/14/398
> >>
> >> Hmm. That's a regular intel i5 Sandybridge CPU. Which certainly has NX.
> >>
> >> Hmm. secondary_startup_64 isn't __initcode, is it? I think it's used
> >> for resuming the other CPU's too and for CPU hotplug. Yes/no?
> >>
> >> If so early_pmd_flags shouldn't be __initdata, I think.
> >>
> >> Michal, does it work if you don't do the revert, but just remove the
> >> __initdata instead?
> >
> > Right you are! The following patch on top of your tree fixes the
> > problem. Thanks a lot. I will leave the proper changelog to somebody who
> > is more familiar with the area but AFAIU the real problem is that
> > early_pmd_flags is no longer available beacause the section is gone.
> >
>
> I'll write it up and send a pull request to Linus.
Thanks, Peter
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-20 18:30 ` H. Peter Anvin
2013-05-20 18:31 ` Michal Hocko
@ 2013-05-20 18:31 ` Linus Torvalds
2013-05-20 18:36 ` H. Peter Anvin
1 sibling, 1 reply; 38+ messages in thread
From: Linus Torvalds @ 2013-05-20 18:31 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Michal Hocko, H. Peter Anvin, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, the arch/x86 maintainers, linux-pm,
Linux Kernel Mailing List
On Mon, May 20, 2013 at 11:30 AM, H. Peter Anvin <hpa@linux.intel.com> wrote:
>
> I'll write it up and send a pull request to Linus.
I'm already doing it.
Linus
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware"
2013-05-20 18:31 ` Linus Torvalds
@ 2013-05-20 18:36 ` H. Peter Anvin
0 siblings, 0 replies; 38+ messages in thread
From: H. Peter Anvin @ 2013-05-20 18:36 UTC (permalink / raw)
To: Linus Torvalds
Cc: H. Peter Anvin, Michal Hocko, Fernando Luis Vázquez Cao,
Rafael J. Wysocki, the arch/x86 maintainers, linux-pm,
Linux Kernel Mailing List
On 05/20/2013 11:31 AM, Linus Torvalds wrote:
> On Mon, May 20, 2013 at 11:30 AM, H. Peter Anvin <hpa@linux.intel.com> wrote:
>>
>> I'll write it up and send a pull request to Linus.
>
> I'm already doing it.
>
If you prefer. It should be __cpuinitdata and not just blank, I believe.
-hpa
^ permalink raw reply [flat|nested] 38+ messages in thread
* [tip:x86/urgent] x86-64: Make early_pmd_flags __cpuinitdata
2013-05-20 18:23 ` Michal Hocko
2013-05-20 18:30 ` H. Peter Anvin
@ 2013-05-20 18:42 ` tip-bot for H. Peter Anvin
2013-05-20 18:50 ` tip-bot for H. Peter Anvin
2 siblings, 0 replies; 38+ messages in thread
From: tip-bot for H. Peter Anvin @ 2013-05-20 18:42 UTC (permalink / raw)
To: linux-tip-commits; +Cc: linux-kernel, hpa, mingo, torvalds, tglx, mhocko, hpa
Commit-ID: 03762e92774e216bfad2e0c0e2f1cb581cfab632
Gitweb: http://git.kernel.org/tip/03762e92774e216bfad2e0c0e2f1cb581cfab632
Author: H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Mon, 20 May 2013 11:30:16 -0700
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Mon, 20 May 2013 11:36:46 -0700
x86-64: Make early_pmd_flags __cpuinitdata
Although early_pmd_flags is not actually *used* except at init time, it
is *set* in secondary_startup_64, which is executed on any CPU
startup, including hotplug and S3 resume.
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Debugged-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20130520182306.GA5348@dhcp22.suse.cz
Cc: <stable@vger.kernel.org> v3.9
---
arch/x86/kernel/head64.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index dab95a8..aa67bdd 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -34,7 +34,8 @@
extern pgd_t early_level4_pgt[PTRS_PER_PGD];
extern pmd_t early_dynamic_pgts[EARLY_DYNAMIC_PAGE_TABLES][PTRS_PER_PMD];
static unsigned int __initdata next_early_pgt = 2;
-pmdval_t __initdata early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
+pmdval_t __cpuinitdata early_pmd_flags =
+ __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
/* Wipe all early page tables except for the kernel symbol map */
static void __init reset_early_page_tables(void)
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [tip:x86/urgent] x86-64: Make early_pmd_flags __cpuinitdata
2013-05-20 18:23 ` Michal Hocko
2013-05-20 18:30 ` H. Peter Anvin
2013-05-20 18:42 ` [tip:x86/urgent] x86-64: Make early_pmd_flags __cpuinitdata tip-bot for H. Peter Anvin
@ 2013-05-20 18:50 ` tip-bot for H. Peter Anvin
2 siblings, 0 replies; 38+ messages in thread
From: tip-bot for H. Peter Anvin @ 2013-05-20 18:50 UTC (permalink / raw)
To: linux-tip-commits; +Cc: linux-kernel, hpa, mingo, torvalds, tglx, mhocko, hpa
Commit-ID: 3a6a27dbe46298ee78a4135fa43c11f6bb3f8a6c
Gitweb: http://git.kernel.org/tip/3a6a27dbe46298ee78a4135fa43c11f6bb3f8a6c
Author: H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Mon, 20 May 2013 11:30:16 -0700
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Mon, 20 May 2013 11:44:52 -0700
x86-64: Make early_pmd_flags __cpuinitdata
Although early_pmd_flags is not actually *used* except at init time, it
is *set* in secondary_startup_64, which is executed on any CPU
startup, including hotplug and S3 resume.
Originally-by: Michal Hocko <mhocko@suse.cz>
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Debugged-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20130520182306.GA5348@dhcp22.suse.cz
Cc: <stable@vger.kernel.org> v3.9
---
arch/x86/kernel/head64.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index dab95a8..aa67bdd 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -34,7 +34,8 @@
extern pgd_t early_level4_pgt[PTRS_PER_PGD];
extern pmd_t early_dynamic_pgts[EARLY_DYNAMIC_PAGE_TABLES][PTRS_PER_PMD];
static unsigned int __initdata next_early_pgt = 2;
-pmdval_t __initdata early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
+pmdval_t __cpuinitdata early_pmd_flags =
+ __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
/* Wipe all early page tables except for the kernel symbol map */
static void __init reset_early_page_tables(void)
^ permalink raw reply related [flat|nested] 38+ messages in thread
end of thread, other threads:[~2013-05-20 18:50 UTC | newest]
Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-14 16:01 3.10-rc1 system starts regular boot when waking from s2ram Michal Hocko
2013-05-14 20:09 ` Rafael J. Wysocki
2013-05-15 8:01 ` Michal Hocko
2013-05-15 8:29 ` Pavel Machek
2013-05-15 9:05 ` Pavel Machek
2013-05-15 9:56 ` Michal Hocko
2013-05-17 7:54 ` Michal Hocko
2013-05-17 12:11 ` Rafael J. Wysocki
2013-05-17 12:09 ` Michal Hocko
2013-05-17 12:23 ` Rafael J. Wysocki
2013-05-17 12:30 ` Michal Hocko
2013-05-15 13:17 ` CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 system starts regular boot when waking from s2ram Fw: [PATCH 2/2] x86: Make Linux guest support optional Victor Miasnikov
2013-05-15 13:17 ` Victor Miasnikov
2013-05-15 13:34 ` Michal Hocko
2013-05-15 13:44 ` Victor Miasnikov
2013-05-15 13:44 ` Victor Miasnikov
2013-05-15 13:46 ` Michal Hocko
2013-05-15 14:05 ` CONFIG_HYPERVISOR_GUEST=y {-- replace -- CONFIG_PARAVIRT_GUEST=y {= { # CONFIG_HYPERVISOR_GUEST is not set } Re: 3.10-rc1 " Victor Miasnikov
2013-05-15 14:05 ` Victor Miasnikov
2013-05-15 14:21 ` Borislav Petkov
2013-05-15 14:52 ` Victor Miasnikov
2013-05-15 14:52 ` Victor Miasnikov
2013-05-15 17:34 ` Luck, Tony
2013-05-15 17:34 ` Luck, Tony
2013-05-20 15:03 ` [PATCH] Revert "x86-64, init: Do not set NX bits on non-NX capable hardware" Michal Hocko
2013-05-20 15:58 ` H. Peter Anvin
2013-05-20 16:43 ` Michal Hocko
2013-05-20 17:21 ` Linus Torvalds
2013-05-20 18:13 ` H. Peter Anvin
2013-05-20 18:18 ` Linus Torvalds
2013-05-20 18:19 ` H. Peter Anvin
2013-05-20 18:23 ` Michal Hocko
2013-05-20 18:30 ` H. Peter Anvin
2013-05-20 18:31 ` Michal Hocko
2013-05-20 18:31 ` Linus Torvalds
2013-05-20 18:36 ` H. Peter Anvin
2013-05-20 18:42 ` [tip:x86/urgent] x86-64: Make early_pmd_flags __cpuinitdata tip-bot for H. Peter Anvin
2013-05-20 18:50 ` tip-bot for H. Peter Anvin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.