* 3.18 regression: Error while assigning device slot ID, USB3 devices not detected
@ 2015-01-18 6:08 Robert Hancock
2015-01-18 6:25 ` Greg KH
0 siblings, 1 reply; 8+ messages in thread
From: Robert Hancock @ 2015-01-18 6:08 UTC (permalink / raw)
To: linux-kernel, Linux-usb
I've got an Intel Haswell-based system with a Gigabyte Z87X-D3H
motherboard under Fedora 21. After updating to the 3.18.2-200 Fedora
kernel, I noticed some errors in dmesg and at least some of my USB3
ports don't recognize any USB3 devices plugged into them:
[ 0.560838] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.560912] xhci_hcd 0000:00:14.0: Max number of devices this xHCI
host supports is 32.
[ 0.560990] usb usb2-port2: couldn't allocate usb_device
[ 0.561098] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.561163] xhci_hcd 0000:00:14.0: Max number of devices this xHCI
host supports is 32.
[ 0.561239] usb usb2-port5: couldn't allocate usb_device
[ 0.561344] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.561409] xhci_hcd 0000:00:14.0: Max number of devices this xHCI
host supports is 32.
[ 0.561484] usb usb2-port6: couldn't allocate usb_device
This worked fine under 3.17. Is this a known problem?
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 3.18 regression: Error while assigning device slot ID, USB3 devices not detected
2015-01-18 6:08 3.18 regression: Error while assigning device slot ID, USB3 devices not detected Robert Hancock
@ 2015-01-18 6:25 ` Greg KH
2015-01-19 13:28 ` Josh Boyer
0 siblings, 1 reply; 8+ messages in thread
From: Greg KH @ 2015-01-18 6:25 UTC (permalink / raw)
To: Robert Hancock; +Cc: linux-kernel, Linux-usb
On Sun, Jan 18, 2015 at 12:08:18AM -0600, Robert Hancock wrote:
> I've got an Intel Haswell-based system with a Gigabyte Z87X-D3H motherboard
> under Fedora 21. After updating to the 3.18.2-200 Fedora kernel, I noticed
> some errors in dmesg and at least some of my USB3 ports don't recognize any
> USB3 devices plugged into them:
>
> [ 0.560838] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
> [ 0.560912] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
> supports is 32.
> [ 0.560990] usb usb2-port2: couldn't allocate usb_device
> [ 0.561098] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
> [ 0.561163] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
> supports is 32.
> [ 0.561239] usb usb2-port5: couldn't allocate usb_device
> [ 0.561344] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
> [ 0.561409] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
> supports is 32.
> [ 0.561484] usb usb2-port6: couldn't allocate usb_device
>
> This worked fine under 3.17. Is this a known problem?
Yes it is, should be fixed in Linus's tree now and will be backported to
the latest 3.18-stable tree in a week or so.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 3.18 regression: Error while assigning device slot ID, USB3 devices not detected
2015-01-18 6:25 ` Greg KH
@ 2015-01-19 13:28 ` Josh Boyer
2015-01-19 13:33 ` Greg KH
0 siblings, 1 reply; 8+ messages in thread
From: Josh Boyer @ 2015-01-19 13:28 UTC (permalink / raw)
To: Greg KH; +Cc: Robert Hancock, linux-kernel, Linux-usb
On Sun, Jan 18, 2015 at 1:25 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
> On Sun, Jan 18, 2015 at 12:08:18AM -0600, Robert Hancock wrote:
>> I've got an Intel Haswell-based system with a Gigabyte Z87X-D3H motherboard
>> under Fedora 21. After updating to the 3.18.2-200 Fedora kernel, I noticed
>> some errors in dmesg and at least some of my USB3 ports don't recognize any
>> USB3 devices plugged into them:
>>
>> [ 0.560838] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>> [ 0.560912] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>> supports is 32.
>> [ 0.560990] usb usb2-port2: couldn't allocate usb_device
>> [ 0.561098] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>> [ 0.561163] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>> supports is 32.
>> [ 0.561239] usb usb2-port5: couldn't allocate usb_device
>> [ 0.561344] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>> [ 0.561409] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>> supports is 32.
>> [ 0.561484] usb usb2-port6: couldn't allocate usb_device
>>
>> This worked fine under 3.17. Is this a known problem?
>
> Yes it is, should be fixed in Linus's tree now and will be backported to
> the latest 3.18-stable tree in a week or so.
Do you happen to know the commit id?
josh
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 3.18 regression: Error while assigning device slot ID, USB3 devices not detected
2015-01-19 13:28 ` Josh Boyer
@ 2015-01-19 13:33 ` Greg KH
2015-01-19 13:47 ` Josh Boyer
0 siblings, 1 reply; 8+ messages in thread
From: Greg KH @ 2015-01-19 13:33 UTC (permalink / raw)
To: Josh Boyer; +Cc: Robert Hancock, linux-kernel, Linux-usb
On Mon, Jan 19, 2015 at 08:28:19AM -0500, Josh Boyer wrote:
> On Sun, Jan 18, 2015 at 1:25 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
> > On Sun, Jan 18, 2015 at 12:08:18AM -0600, Robert Hancock wrote:
> >> I've got an Intel Haswell-based system with a Gigabyte Z87X-D3H motherboard
> >> under Fedora 21. After updating to the 3.18.2-200 Fedora kernel, I noticed
> >> some errors in dmesg and at least some of my USB3 ports don't recognize any
> >> USB3 devices plugged into them:
> >>
> >> [ 0.560838] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
> >> [ 0.560912] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
> >> supports is 32.
> >> [ 0.560990] usb usb2-port2: couldn't allocate usb_device
> >> [ 0.561098] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
> >> [ 0.561163] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
> >> supports is 32.
> >> [ 0.561239] usb usb2-port5: couldn't allocate usb_device
> >> [ 0.561344] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
> >> [ 0.561409] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
> >> supports is 32.
> >> [ 0.561484] usb usb2-port6: couldn't allocate usb_device
> >>
> >> This worked fine under 3.17. Is this a known problem?
> >
> > Yes it is, should be fixed in Linus's tree now and will be backported to
> > the latest 3.18-stable tree in a week or so.
>
> Do you happen to know the commit id?
f161ead70fa6a62e432dff6e9dab8e3cfbeabea6
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 3.18 regression: Error while assigning device slot ID, USB3 devices not detected
2015-01-19 13:33 ` Greg KH
@ 2015-01-19 13:47 ` Josh Boyer
2015-01-19 14:57 ` Mathias Nyman
0 siblings, 1 reply; 8+ messages in thread
From: Josh Boyer @ 2015-01-19 13:47 UTC (permalink / raw)
To: Greg KH; +Cc: Robert Hancock, linux-kernel, Linux-usb
On Mon, Jan 19, 2015 at 8:33 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
> On Mon, Jan 19, 2015 at 08:28:19AM -0500, Josh Boyer wrote:
>> On Sun, Jan 18, 2015 at 1:25 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
>> > On Sun, Jan 18, 2015 at 12:08:18AM -0600, Robert Hancock wrote:
>> >> I've got an Intel Haswell-based system with a Gigabyte Z87X-D3H motherboard
>> >> under Fedora 21. After updating to the 3.18.2-200 Fedora kernel, I noticed
>> >> some errors in dmesg and at least some of my USB3 ports don't recognize any
>> >> USB3 devices plugged into them:
>> >>
>> >> [ 0.560838] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>> >> [ 0.560912] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>> >> supports is 32.
>> >> [ 0.560990] usb usb2-port2: couldn't allocate usb_device
>> >> [ 0.561098] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>> >> [ 0.561163] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>> >> supports is 32.
>> >> [ 0.561239] usb usb2-port5: couldn't allocate usb_device
>> >> [ 0.561344] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>> >> [ 0.561409] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>> >> supports is 32.
>> >> [ 0.561484] usb usb2-port6: couldn't allocate usb_device
>> >>
>> >> This worked fine under 3.17. Is this a known problem?
>> >
>> > Yes it is, should be fixed in Linus's tree now and will be backported to
>> > the latest 3.18-stable tree in a week or so.
>>
>> Do you happen to know the commit id?
>
> f161ead70fa6a62e432dff6e9dab8e3cfbeabea6
Thanks!
josh
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 3.18 regression: Error while assigning device slot ID, USB3 devices not detected
2015-01-19 13:47 ` Josh Boyer
@ 2015-01-19 14:57 ` Mathias Nyman
2015-01-19 15:40 ` Josh Boyer
0 siblings, 1 reply; 8+ messages in thread
From: Mathias Nyman @ 2015-01-19 14:57 UTC (permalink / raw)
To: Josh Boyer, Robert Hancock; +Cc: Greg KH, linux-kernel, Linux-usb
On 19.01.2015 15:47, Josh Boyer wrote:
> On Mon, Jan 19, 2015 at 8:33 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
>> On Mon, Jan 19, 2015 at 08:28:19AM -0500, Josh Boyer wrote:
>>> On Sun, Jan 18, 2015 at 1:25 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
>>>> On Sun, Jan 18, 2015 at 12:08:18AM -0600, Robert Hancock wrote:
>>>>> I've got an Intel Haswell-based system with a Gigabyte Z87X-D3H motherboard
>>>>> under Fedora 21. After updating to the 3.18.2-200 Fedora kernel, I noticed
>>>>> some errors in dmesg and at least some of my USB3 ports don't recognize any
>>>>> USB3 devices plugged into them:
>>>>>
>>>>> [ 0.560838] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>>>>> [ 0.560912] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>>>>> supports is 32.
>>>>> [ 0.560990] usb usb2-port2: couldn't allocate usb_device
>>>>> [ 0.561098] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>>>>> [ 0.561163] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>>>>> supports is 32.
>>>>> [ 0.561239] usb usb2-port5: couldn't allocate usb_device
>>>>> [ 0.561344] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>>>>> [ 0.561409] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>>>>> supports is 32.
>>>>> [ 0.561484] usb usb2-port6: couldn't allocate usb_device
>>>>>
>>>>> This worked fine under 3.17. Is this a known problem?
>>>>
>>>> Yes it is, should be fixed in Linus's tree now and will be backported to
>>>> the latest 3.18-stable tree in a week or so.
>>>
>>> Do you happen to know the commit id?
>>
>> f161ead70fa6a62e432dff6e9dab8e3cfbeabea6
>
> Thanks!
>
Tell me if this fixed the issue.
I got this gut feeling this might be something else.
It should have failed in 3.17 as well
-Mathias
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 3.18 regression: Error while assigning device slot ID, USB3 devices not detected
2015-01-19 14:57 ` Mathias Nyman
@ 2015-01-19 15:40 ` Josh Boyer
2015-01-20 0:53 ` Robert Hancock
0 siblings, 1 reply; 8+ messages in thread
From: Josh Boyer @ 2015-01-19 15:40 UTC (permalink / raw)
To: Mathias Nyman; +Cc: Robert Hancock, Greg KH, linux-kernel, Linux-usb
On Mon, Jan 19, 2015 at 9:57 AM, Mathias Nyman
<mathias.nyman@linux.intel.com> wrote:
> On 19.01.2015 15:47, Josh Boyer wrote:
>> On Mon, Jan 19, 2015 at 8:33 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
>>> On Mon, Jan 19, 2015 at 08:28:19AM -0500, Josh Boyer wrote:
>>>> On Sun, Jan 18, 2015 at 1:25 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
>>>>> On Sun, Jan 18, 2015 at 12:08:18AM -0600, Robert Hancock wrote:
>>>>>> I've got an Intel Haswell-based system with a Gigabyte Z87X-D3H motherboard
>>>>>> under Fedora 21. After updating to the 3.18.2-200 Fedora kernel, I noticed
>>>>>> some errors in dmesg and at least some of my USB3 ports don't recognize any
>>>>>> USB3 devices plugged into them:
>>>>>>
>>>>>> [ 0.560838] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>>>>>> [ 0.560912] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>>>>>> supports is 32.
>>>>>> [ 0.560990] usb usb2-port2: couldn't allocate usb_device
>>>>>> [ 0.561098] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>>>>>> [ 0.561163] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>>>>>> supports is 32.
>>>>>> [ 0.561239] usb usb2-port5: couldn't allocate usb_device
>>>>>> [ 0.561344] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>>>>>> [ 0.561409] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>>>>>> supports is 32.
>>>>>> [ 0.561484] usb usb2-port6: couldn't allocate usb_device
>>>>>>
>>>>>> This worked fine under 3.17. Is this a known problem?
>>>>>
>>>>> Yes it is, should be fixed in Linus's tree now and will be backported to
>>>>> the latest 3.18-stable tree in a week or so.
>>>>
>>>> Do you happen to know the commit id?
>>>
>>> f161ead70fa6a62e432dff6e9dab8e3cfbeabea6
>>
>> Thanks!
>>
>
> Tell me if this fixed the issue.
> I got this gut feeling this might be something else.
> It should have failed in 3.17 as well
OK. We're tracking this in the bug Robert filed here:
https://bugzilla.redhat.com/show_bug.cgi?id=1183289
The patch should be in the next Fedora kernel build, so hopefully we
can get back to you soon.
josh
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 3.18 regression: Error while assigning device slot ID, USB3 devices not detected
2015-01-19 15:40 ` Josh Boyer
@ 2015-01-20 0:53 ` Robert Hancock
0 siblings, 0 replies; 8+ messages in thread
From: Robert Hancock @ 2015-01-20 0:53 UTC (permalink / raw)
To: Josh Boyer; +Cc: Mathias Nyman, Greg KH, linux-kernel, Linux-usb
On Mon, Jan 19, 2015 at 9:40 AM, Josh Boyer <jwboyer@fedoraproject.org> wrote:
> On Mon, Jan 19, 2015 at 9:57 AM, Mathias Nyman
> <mathias.nyman@linux.intel.com> wrote:
>> On 19.01.2015 15:47, Josh Boyer wrote:
>>> On Mon, Jan 19, 2015 at 8:33 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
>>>> On Mon, Jan 19, 2015 at 08:28:19AM -0500, Josh Boyer wrote:
>>>>> On Sun, Jan 18, 2015 at 1:25 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
>>>>>> On Sun, Jan 18, 2015 at 12:08:18AM -0600, Robert Hancock wrote:
>>>>>>> I've got an Intel Haswell-based system with a Gigabyte Z87X-D3H motherboard
>>>>>>> under Fedora 21. After updating to the 3.18.2-200 Fedora kernel, I noticed
>>>>>>> some errors in dmesg and at least some of my USB3 ports don't recognize any
>>>>>>> USB3 devices plugged into them:
>>>>>>>
>>>>>>> [ 0.560838] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>>>>>>> [ 0.560912] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>>>>>>> supports is 32.
>>>>>>> [ 0.560990] usb usb2-port2: couldn't allocate usb_device
>>>>>>> [ 0.561098] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>>>>>>> [ 0.561163] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>>>>>>> supports is 32.
>>>>>>> [ 0.561239] usb usb2-port5: couldn't allocate usb_device
>>>>>>> [ 0.561344] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
>>>>>>> [ 0.561409] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host
>>>>>>> supports is 32.
>>>>>>> [ 0.561484] usb usb2-port6: couldn't allocate usb_device
>>>>>>>
>>>>>>> This worked fine under 3.17. Is this a known problem?
>>>>>>
>>>>>> Yes it is, should be fixed in Linus's tree now and will be backported to
>>>>>> the latest 3.18-stable tree in a week or so.
>>>>>
>>>>> Do you happen to know the commit id?
>>>>
>>>> f161ead70fa6a62e432dff6e9dab8e3cfbeabea6
>>>
>>> Thanks!
>>>
>>
>> Tell me if this fixed the issue.
>> I got this gut feeling this might be something else.
>> It should have failed in 3.17 as well
>
> OK. We're tracking this in the bug Robert filed here:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1183289
>
> The patch should be in the next Fedora kernel build, so hopefully we
> can get back to you soon.
The patched build seems to fix the problem with the ports not
recognizing SuperSpeed devices. I do get these errors in dmesg now
though, which also weren't in 3.17:
[ 0.881967] usb: failed to peer 1-9-port1 and 2-5-port1 by location
(1-9-port1:none) (2-5-port1:usb1-port11)
[ 0.881968] usb 1-9-port1: failed to peer to 2-5-port1 (-16)
[ 0.881969] usb: port power management may be unreliable
[ 0.881993] usb: failed to peer 1-9-port2 and 2-5-port2 by location
(1-9-port2:none) (2-5-port2:usb1-port12)
[ 0.881994] usb 1-9-port2: failed to peer to 2-5-port2 (-16)
[ 0.882015] usb: failed to peer 1-9-port3 and 2-5-port3 by location
(1-9-port3:none) (2-5-port3:usb1-port13)
[ 0.882016] usb 1-9-port3: failed to peer to 2-5-port3 (-16)
[ 0.882037] usb: failed to peer 1-9-port4 and 2-5-port4 by location
(1-9-port4:none) (2-5-port4:usb1-port14)
[ 0.882038] usb 1-9-port4: failed to peer to 2-5-port4 (-16)
Full dmesg is attached to this bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=1183289
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-01-20 0:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-18 6:08 3.18 regression: Error while assigning device slot ID, USB3 devices not detected Robert Hancock
2015-01-18 6:25 ` Greg KH
2015-01-19 13:28 ` Josh Boyer
2015-01-19 13:33 ` Greg KH
2015-01-19 13:47 ` Josh Boyer
2015-01-19 14:57 ` Mathias Nyman
2015-01-19 15:40 ` Josh Boyer
2015-01-20 0:53 ` Robert Hancock
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.