* mmc0: Unexpected interrupt 0x04000000.
@ 2018-01-05 12:44 Mathieu Malaterre
2018-01-11 9:12 ` Adrian Hunter
0 siblings, 1 reply; 2+ messages in thread
From: Mathieu Malaterre @ 2018-01-05 12:44 UTC (permalink / raw)
To: Adrian Hunter, Ulf Hansson; +Cc: linux-mmc, linux-kernel
Hi there,
I am trying to get sdhci-pci driver to work with the following hardware:
$ sudo lspci -s 03:00.1 -v -nn
03:00.1 SD Host controller [0805]: Broadcom Limited BCM57765/57785
SDXC/MMC Card Reader [14e4:16bc] (rev 10) (prog-if 01)
Subsystem: Broadcom Limited BCM57765/57785 SDXC/MMC Card Reader [14e4:96bc]
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at c1820000 (64-bit, prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [ac] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Power Budgeting <?>
Capabilities: [160] Virtual Channel
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
I am using a MacBookPro10,1. I cannot get the driver to work when
using a SDHC Samsung Evo 16GB (placed inside a card reader), it always
report the following (1).
If I now place the card onto a USB reader (USB-HUB reader) then
everything is fine (tested using f3: f3probe). Are there any options I
can switch to make the driver more tolerant with my hardware ?
Thanks
Current system is Debian stable with kernel 4.14 (backport), modinfo returns:
$ /sbin/modinfo sdhci-pci
filename:
/lib/modules/4.14.0-0.bpo.2-amd64/kernel/drivers/mmc/host/sdhci-pci.ko
license: GPL
description: Secure Digital Host Controller Interface PCI driver
author: Pierre Ossman <pierre@ossman.eu>
alias: pci:v*d*sv*sd*bc08sc05i*
alias: pci:v00001022d*sv*sd*bc08sc05i*
alias: pci:v00001217d00008621sv*sd*bc*sc*i*
alias: pci:v00001217d00008620sv*sd*bc*sc*i*
alias: pci:v00001217d00008421sv*sd*bc*sc*i*
alias: pci:v00001217d00008420sv*sd*bc*sc*i*
(...)
alias: pci:v00001524d00000551sv*sd*bc*sc*i*
alias: pci:v00001524d00000550sv*sd*bc*sc*i*
alias: pci:v00001180d0000E823sv*sd*bc*sc*i*
alias: pci:v00001180d0000E822sv*sd*bc*sc*i*
alias: pci:v00001180d00000843sv*sd*bc*sc*i*
alias: pci:v00001180d00000822sv*sd*bc*sc*i*
depends: sdhci,mmc_core
intree: Y
name: sdhci_pci
vermagic: 4.14.0-0.bpo.2-amd64 SMP mod_unload modversions
(1)
[ 220.210842] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 220.210934] mmc0: new ultra high speed DDR50 SDHC card at address 59b4
[ 220.219075] mmcblk0: mmc0:59b4 00000 14.9 GiB
[ 230.362858] mmc0: Timeout waiting for hardware interrupt.
[ 230.362868] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 230.362918] mmc0: sdhci: Sys addr: 0x000000c8 | Version: 0x00001502
[ 230.362927] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
[ 230.362937] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b
[ 230.362946] mmc0: sdhci: Present: 0x1fff0000 | Host ctl: 0x0000001f
[ 230.362955] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 230.362964] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 230.362974] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 230.362982] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 230.362992] mmc0: sdhci: AC12 err: 0x00000010 | Slot int: 0x00000000
[ 230.363001] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 230.363011] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000
[ 230.363020] mmc0: sdhci: Resp[0]: 0x00001201 | Resp[1]: 0x00000000
[ 230.363029] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 230.363035] mmc0: sdhci: Host ctl2: 0x0000804c
[ 230.363047] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x0000000457940204
[ 230.363049] mmc0: sdhci: ============================================
[ 230.363119] mmc0: Unexpected interrupt 0x04000000.
[ 230.363128] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 230.363157] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 230.363166] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
[ 230.363174] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000033
[ 230.363184] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x0000001f
[ 230.363193] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 230.363203] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 230.363214] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 230.363225] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 230.363234] mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 230.363244] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 230.363253] mmc0: sdhci: Cmd: 0x00000c1a | Max curr: 0x00000000
[ 230.363263] mmc0: sdhci: Resp[0]: 0x00001201 | Resp[1]: 0x00000000
[ 230.363272] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 230.363278] mmc0: sdhci: Host ctl2: 0x0000800c
[ 230.363292] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x0000000457940204
[ 230.363294] mmc0: sdhci: ============================================
[ 230.363509] mmcblk0: error -110 sending stop command, original cmd
response 0x0, card status 0x400900
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: mmc0: Unexpected interrupt 0x04000000.
2018-01-05 12:44 mmc0: Unexpected interrupt 0x04000000 Mathieu Malaterre
@ 2018-01-11 9:12 ` Adrian Hunter
0 siblings, 0 replies; 2+ messages in thread
From: Adrian Hunter @ 2018-01-11 9:12 UTC (permalink / raw)
To: Mathieu Malaterre, Ulf Hansson; +Cc: linux-mmc, linux-kernel
On 05/01/18 14:44, Mathieu Malaterre wrote:
> Hi there,
>
> I am trying to get sdhci-pci driver to work with the following hardware:
>
> $ sudo lspci -s 03:00.1 -v -nn
> 03:00.1 SD Host controller [0805]: Broadcom Limited BCM57765/57785
> SDXC/MMC Card Reader [14e4:16bc] (rev 10) (prog-if 01)
> Subsystem: Broadcom Limited BCM57765/57785 SDXC/MMC Card Reader [14e4:96bc]
> Flags: bus master, fast devsel, latency 0, IRQ 17
> Memory at c1820000 (64-bit, prefetchable) [size=64K]
> Capabilities: [48] Power Management version 3
> Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
> Capabilities: [ac] Express Endpoint, MSI 00
> Capabilities: [100] Advanced Error Reporting
> Capabilities: [150] Power Budgeting <?>
> Capabilities: [160] Virtual Channel
> Kernel driver in use: sdhci-pci
> Kernel modules: sdhci_pci
>
> I am using a MacBookPro10,1. I cannot get the driver to work when
> using a SDHC Samsung Evo 16GB (placed inside a card reader), it always
> report the following (1).
>
> If I now place the card onto a USB reader (USB-HUB reader) then
> everything is fine (tested using f3: f3probe). Are there any options I
> can switch to make the driver more tolerant with my hardware ?
>
> Thanks
>
> Current system is Debian stable with kernel 4.14 (backport), modinfo returns:
>
> $ /sbin/modinfo sdhci-pci
> filename:
> /lib/modules/4.14.0-0.bpo.2-amd64/kernel/drivers/mmc/host/sdhci-pci.ko
> license: GPL
> description: Secure Digital Host Controller Interface PCI driver
> author: Pierre Ossman <pierre@ossman.eu>
> alias: pci:v*d*sv*sd*bc08sc05i*
> alias: pci:v00001022d*sv*sd*bc08sc05i*
> alias: pci:v00001217d00008621sv*sd*bc*sc*i*
> alias: pci:v00001217d00008620sv*sd*bc*sc*i*
> alias: pci:v00001217d00008421sv*sd*bc*sc*i*
> alias: pci:v00001217d00008420sv*sd*bc*sc*i*
> (...)
> alias: pci:v00001524d00000551sv*sd*bc*sc*i*
> alias: pci:v00001524d00000550sv*sd*bc*sc*i*
> alias: pci:v00001180d0000E823sv*sd*bc*sc*i*
> alias: pci:v00001180d0000E822sv*sd*bc*sc*i*
> alias: pci:v00001180d00000843sv*sd*bc*sc*i*
> alias: pci:v00001180d00000822sv*sd*bc*sc*i*
> depends: sdhci,mmc_core
> intree: Y
> name: sdhci_pci
> vermagic: 4.14.0-0.bpo.2-amd64 SMP mod_unload modversions
>
>
> (1)
> [ 220.210842] mmc0: Tuning timeout, falling back to fixed sampling clock
> [ 220.210934] mmc0: new ultra high speed DDR50 SDHC card at address 59b4
> [ 220.219075] mmcblk0: mmc0:59b4 00000 14.9 GiB
> [ 230.362858] mmc0: Timeout waiting for hardware interrupt.
> [ 230.362868] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
> [ 230.362918] mmc0: sdhci: Sys addr: 0x000000c8 | Version: 0x00001502
> [ 230.362927] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
> [ 230.362937] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b
> [ 230.362946] mmc0: sdhci: Present: 0x1fff0000 | Host ctl: 0x0000001f
> [ 230.362955] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
> [ 230.362964] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
> [ 230.362974] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
> [ 230.362982] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
> [ 230.362992] mmc0: sdhci: AC12 err: 0x00000010 | Slot int: 0x00000000
> [ 230.363001] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
> [ 230.363011] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000
> [ 230.363020] mmc0: sdhci: Resp[0]: 0x00001201 | Resp[1]: 0x00000000
> [ 230.363029] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
> [ 230.363035] mmc0: sdhci: Host ctl2: 0x0000804c
> [ 230.363047] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x0000000457940204
> [ 230.363049] mmc0: sdhci: ============================================
> [ 230.363119] mmc0: Unexpected interrupt 0x04000000.
Tuning error presumably because it used fixed sampling because tuning
failed. Strange considering that interrupt is not enabled.
If you can't get tuning to work, you may need to disable the transfer modes
that require tuning.
> [ 230.363128] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
> [ 230.363157] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
> [ 230.363166] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
> [ 230.363174] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000033
> [ 230.363184] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x0000001f
> [ 230.363193] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
> [ 230.363203] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
> [ 230.363214] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
> [ 230.363225] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
> [ 230.363234] mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
> [ 230.363244] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
> [ 230.363253] mmc0: sdhci: Cmd: 0x00000c1a | Max curr: 0x00000000
> [ 230.363263] mmc0: sdhci: Resp[0]: 0x00001201 | Resp[1]: 0x00000000
> [ 230.363272] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
> [ 230.363278] mmc0: sdhci: Host ctl2: 0x0000800c
> [ 230.363292] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x0000000457940204
> [ 230.363294] mmc0: sdhci: ============================================
> [ 230.363509] mmcblk0: error -110 sending stop command, original cmd
> response 0x0, card status 0x400900
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-01-11 9:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-05 12:44 mmc0: Unexpected interrupt 0x04000000 Mathieu Malaterre
2018-01-11 9:12 ` Adrian Hunter
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.