* MCE triggered with v3.1 and v3.2 on Xeon E5
@ 2012-03-30 16:15 Arnaud Lacombe
2012-03-30 17:07 ` Tony Luck
0 siblings, 1 reply; 2+ messages in thread
From: Arnaud Lacombe @ 2012-03-30 16:15 UTC (permalink / raw)
To: x86; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 5878 bytes --]
Hi,
I am having some trouble with Linux v3.1 and v3.2[0] on a machine
based on an E5-1650. I want to bench this platform with hackbench, but
both kernel crashes on the following MCE:
[49922.326743] mce_notify_irq: 7 callbacks suppressed^M
[49922.331612] [Hardware Error]: Machine check events logged^M
[49922.354705] [Hardware Error]: Machine check events logged^M
[49954.962291] Disabling lock debugging due to kernel taint
[...]
[49955.606532] [Hardware Error]: CPU 0: Machine Check Exception: 0
Bank 5: 8c00004000010093^M
[49955.614797] [Hardware Error]: TSC 0 ADDR 2c0cb9c0 MISC 2048008086 ^M
[49955.621125] [Hardware Error]: PROCESSOR 0:206d7 TIME 1333100255
SOCKET 0 APIC 0^M
[49955.628603] [Hardware Error]: CPU 0: Machine Check Exception: 0
Bank 5: 8c00004000010093^M
[49955.636844] [Hardware Error]: TSC 0 ADDR 2c0ca0c0 MISC 214074f486 ^M
[49955.643163] [Hardware Error]: PROCESSOR 0:206d7 TIME 1333100257
SOCKET 0 APIC 0^M
[49955.650642] [Hardware Error]: CPU 0: Machine Check Exception: 0
Bank 5: 8c00004000010093^M
[49955.658857] [Hardware Error]: TSC 0 ADDR 2c0cc5c0 MISC 2140424286 ^M
[49955.665237] [Hardware Error]: PROCESSOR 0:206d7 TIME 1333100263
SOCKET 0 APIC 0^M
[49955.672706] [Hardware Error]: CPU 0: Machine Check Exception: 0
Bank 5: cc00010000010093^M
[49955.680938] [Hardware Error]: TSC 0 ADDR 2c0cd8c0 MISC 2048121286 ^M
[49955.687249] [Hardware Error]: PROCESSOR 0:206d7 TIME 1333100263
SOCKET 0 APIC 0^M
[49955.694710] [Hardware Error]: CPU 0: Machine Check Exception: 0
Bank 5: 8c00004000010093^M
[49955.702949] [Hardware Error]: TSC 0 ADDR 2c0ca0c0 MISC 14074f486 ^M
[49955.709190] [Hardware Error]: PROCESSOR 0:206d7 TIME 1333100267
SOCKET 0 APIC 0^M
[49955.716653] [Hardware Error]: CPU 0: Machine Check Exception: 0
Bank 5: 8c00004000010093^M
[49955.724895] [Hardware Error]: TSC 0 ADDR 2c0c81c0 MISC 2148008086 ^M
[49955.731248] [Hardware Error]: PROCESSOR 0:206d7 TIME 1333100267
SOCKET 0 APIC 0^M
[49955.738709] [Hardware Error]: CPU 0: Machine Check Exception: 5
Bank 5: fe00004000010093^M
[49955.746953] [Hardware Error]: RIP !INEXACT! 60:<00000000c1013a4c>
{mce_rdmsrl+0x6c/0x110}^M
[49955.755344] [Hardware Error]: TSC 917c4c8538b6 ADDR 2c0cabc0 MISC
20400e0e86 ^M
[49955.762640] [Hardware Error]: PROCESSOR 0:206d7 TIME 1333100269
SOCKET 0 APIC 0^M
[49955.770080] [Hardware Error]: Machine check: Processor context corrupt^M
[49955.776673] Kernel panic - not syncing: Fatal Machine check^M
[49955.782350] Pid: 21421, comm: hackbench Tainted: G M W 3.1.0 #1^M
[49955.788953] Call Trace:^M
[49955.791486] [<c1656f4a>] ? printk+0x18/0x1a^M
[49955.795832] [<c1656e3c>] panic+0x57/0x14d^M
[49955.800060] [<c1013c62>] mce_panic+0x172/0x1a0^M
[49955.804668] [<c1014d32>] do_machine_check+0x812/0x820^M
[49955.809876] [<c16591c1>] ? __slab_free+0x1d/0x214^M
[49955.814732] [<c1014520>] ? mce_process_work+0x10/0x10^M
[49955.819961] [<c16604aa>] error_code+0x5a/0x60^M
[49955.824486] [<c1014520>] ? mce_process_work+0x10/0x10^M
[49955.829708] [<c16591c1>] ? __slab_free+0x1d/0x214^M
[49955.834577] [<c108beb8>] ? rcu_irq_exit+0x8/0x10^M
[49955.839369] [<c1040917>] ? irq_exit+0x37/0x90^M
[49955.843888] [<c1015afd>] ? smp_threshold_interrupt+0x2d/0x30^M
[49955.849733] [<c16603aa>] ? threshold_interrupt+0x2a/0x30^M
[49955.855210] [<c10ded05>] kfree+0xf5/0x120^M
[49955.859370] [<c14fb850>] ? skb_release_data+0xa0/0xc0^M
[49955.864591] [<c1598e6a>] ? unix_destruct_scm+0x7a/0x80^M
[49955.869885] [<c14fb850>] ? skb_release_data+0xa0/0xc0^M
[49955.875104] [<c14fb850>] skb_release_data+0xa0/0xc0^M
[49955.880131] [<c14fb882>] __kfree_skb+0x12/0x90^M
[49955.884744] [<c14fb92a>] consume_skb+0x2a/0x80^M
[49955.889364] [<c159ad23>] unix_stream_recvmsg+0x1e3/0x580^M
[49955.894868] [<c1057180>] ? abort_exclusive_wait+0x80/0x80^M
[49955.900436] [<c14f4f54>] sock_aio_read+0x114/0x130^M
[49955.905379] [<c10e1844>] do_sync_read+0xa4/0xe0^M
[49955.910072] [<c10e1d77>] ? rw_verify_area+0x67/0x120^M
[49955.915239] [<c105b574>] ? hrtimer_interrupt+0x154/0x250^M
[49955.920713] [<c10e2199>] vfs_read+0x149/0x160^M
[49955.925264] [<c10e2428>] sys_read+0x38/0x70^M
[49955.929600] [<c165fa5d>] syscall_call+0x7/0xb^M
[49955.934141] [<c1650000>] ? early_init_intel+0x27/0x152^M
[49957.015689] Rebooting in 30 seconds..
Processor is identified as:
# head -40 /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 45
model name : Intel(R) Xeon(R) CPU E5-1650 0 @ 3.20GHz
stepping : 7
microcode : 0x708
cpu MHz : 1200.000
cache size : 12288 KB
physical id : 0
siblings : 12
core id : 0
cpu cores : 6
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx
pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts xtopology
nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est
tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt
tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts
dts tpr_shadow vnmi flexpriority ept vpid
bogomips : 6384.73
clflush size : 64
cache_alignment : 64
address sizes : 46 bits physical, 48 bits virtual
power management:
The BIOS on this platform is fairly recent:
Supermicro X9SRE/X9SRE-3F/X9SRi/X9SRi-3F BIOS Date:02/10/2012 Rev:1.00
Currently, I would suspect an hardware issue as the machine is brand
new. I'll see if v3.3 trigger the same MCE and eventually run a
memtest.
Any hints and/or suggestion appreciated.
Thanks,
- Arnaud
[0]: other kernel might be affected, but I do not have explicit logs
of crashes on those.
[-- Attachment #2: E5-1650-dmesg --]
[-- Type: application/octet-stream, Size: 69674 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0+ (al@alia) (gcc version 4.6.1 20110908 (Red Hat 4.6.1-9) (GCC) ) #2 SMP Sun Jan 22 11:58:21 EST 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007e48d000 (usable)
[ 0.000000] BIOS-e820: 000000007e48d000 - 000000007e599000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007e599000 - 000000007f21a000 (reserved)
[ 0.000000] BIOS-e820: 000000007f21a000 - 000000007f28f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f28f000 - 000000007f33d000 (reserved)
[ 0.000000] BIOS-e820: 000000007f33d000 - 000000007f34d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f34d000 - 000000007f376000 (reserved)
[ 0.000000] BIOS-e820: 000000007f376000 - 000000007f800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000880000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Supermicro X9SRE/X9SRE-3F/X9SRi/X9SRi-3F/X9SRE/X9SRE-3F/X9SRi/X9SRi-3F, BIOS 1.00 02/10/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7e48d max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask 3FF800000000 write-back
[ 0.000000] 1 base 000800000000 mask 3FFF80000000 write-back
[ 0.000000] 2 base 000080000000 mask 3FFF80000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00fd860] fd860
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c0097000] 97000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] ACPI: RSDP 000f0490 00024 (v02 SUPERM)
[ 0.000000] ACPI: XSDT 7f21a070 00064 (v01 00000001 AMI 00010013)
[ 0.000000] ACPI: FACP 7f223720 000F4 (v04 00000001 AMI 00010013)
[ 0.000000] ACPI: DSDT 7f21a168 095B1 (v02 00000000 INTL 20091112)
[ 0.000000] ACPI: FACS 7f34af80 00040
[ 0.000000] ACPI: APIC 7f223818 00100 (v03 SUPERM SMCI--MB 00000001 AMI 00010013)
[ 0.000000] ACPI: PRAD 7f223918 000BE (v02 PRADID PRADTID 00000001 MSFT 04000000)
[ 0.000000] ACPI: HPET 7f2239d8 00038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005)
[ 0.000000] ACPI: SSDT 7f223a10 6B344 (v02 INTEL CpuPm 00004000 INTL 20091112)
[ 0.000000] ACPI: SPCR 7f28ed58 00050 (v01 A M I APTIO4 00000001 AMI. 00000005)
[ 0.000000] ACPI: MCFG 7f28eda8 0003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097)
[ 0.000000] ACPI: DMAR 7f28ede8 000C4 (v01 A M I OEMDMAR 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1132MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007e48d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0007e48d
[ 0.000000] On node 0 totalpages: 517144
[ 0.000000] free_area_init_node: node 0, pgdat c189c280, node_mem_map f682d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2266 pages used for memmap
[ 0.000000] HighMem zone: 287669 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages/cpu @f6400000 s29440 r0 d15616 u262144
[ 0.000000] pcpu-alloc: s29440 r0 d15616 u262144 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513102
[ 0.000000] Kernel command line: init=/bin/sh root=/dev/sda2 rootfstype=ext4 rootwait console=tty0 console=ttyS0,115200n8 noinitrd reboot=bios
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007e48d)
[ 0.000000] Memory: 2040948k/2069044k available (6521k kernel code, 27628k reserved, 2343k data, 452k init, 1159740k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc18a9000 - 0xc191a000 ( 452 kB)
[ 0.000000] .data : 0xc165e5a8 - 0xc18a8440 (2343 kB)
[ 0.000000] .text : 0xc1000000 - 0xc165e5a8 (6521 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:1184 16
[ 0.000000] CPU 0 irqstacks, hard=f600c000 soft=f600e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3192.367 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.73 BogoMIPS (lpj=3192367)
[ 0.010881] pid_max: default: 32768 minimum: 301
[ 0.015678] Security Framework initialized
[ 0.019914] SELinux: Initializing.
[ 0.023536] SELinux: Starting in permissive mode
[ 0.023559] Mount-cache hash table entries: 512
[ 0.028422] Initializing cgroup subsys cpuacct
[ 0.033002] Initializing cgroup subsys freezer
[ 0.037638] CPU: Physical Processor ID: 0
[ 0.041778] CPU: Processor Core ID: 0
[ 0.045577] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.045579] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.058853] mce: CPU supports 18 MCE banks
[ 0.063135] CPU0: Thermal monitoring enabled (TM1)
[ 0.068088] using mwait in idle threads.
[ 0.072400] ACPI: Core revision 20110623
[ 0.107891] Overriding APIC driver with bigsmp
[ 0.112470] Enabling APIC mode: Physflat. Using 2 I/O APICs
[ 0.118688] Leaving ESR disabled.
[ 0.122314] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.138420] CPU0: Intel(R) Xeon(R) CPU E5-1650 0 @ 3.20GHz stepping 07
[ 0.246076] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.253957] ... version: 3
[ 0.258080] ... bit width: 48
[ 0.262300] ... generic registers: 4
[ 0.266426] ... value mask: 0000ffffffffffff
[ 0.271866] ... max period: 000000007fffffff
[ 0.277286] ... fixed-purpose events: 3
[ 0.281424] ... event mask: 000000070000000f
[ 0.287107] CPU 1 irqstacks, hard=f60fe000 soft=f6100000
[ 0.287110] Booting Node 0, Processors #1
[ 0.291348] smpboot cpu 1: start_ip = 97000
[ 0.307030] Initializing CPU#1
[ 0.310089] Leaving ESR disabled.
[ 0.393038] CPU 2 irqstacks, hard=f610a000 soft=f610c000
[ 0.393041] #2
[ 0.394681] smpboot cpu 2: start_ip = 97000
[ 0.405922] Initializing CPU#2
[ 0.408980] Leaving ESR disabled.
[ 0.491725] CPU 3 irqstacks, hard=f6116000 soft=f6118000
[ 0.491728] #3
[ 0.493365] smpboot cpu 3: start_ip = 97000
[ 0.504612] Initializing CPU#3
[ 0.507673] Leaving ESR disabled.
[ 0.590476] CPU 4 irqstacks, hard=f6122000 soft=f6124000
[ 0.590479] #4
[ 0.592118] smpboot cpu 4: start_ip = 97000
[ 0.603363] Initializing CPU#4
[ 0.606425] Leaving ESR disabled.
[ 0.689274] CPU 5 irqstacks, hard=f614a000 soft=f614c000
[ 0.689277] #5
[ 0.690914] smpboot cpu 5: start_ip = 97000
[ 0.702158] Initializing CPU#5
[ 0.705238] Leaving ESR disabled.
[ 0.787929] CPU 6 irqstacks, hard=f6156000 soft=f6158000
[ 0.787932] #6
[ 0.789572] smpboot cpu 6: start_ip = 97000
[ 0.803565] Initializing CPU#6
[ 0.806621] Leaving ESR disabled.
[ 0.889765] CPU 7 irqstacks, hard=f6162000 soft=f6164000
[ 0.889768] #7
[ 0.891411] smpboot cpu 7: start_ip = 97000
[ 0.905135] Initializing CPU#7
[ 0.908190] Leaving ESR disabled.
[ 0.991495] CPU 8 irqstacks, hard=f616e000 soft=f6170000
[ 0.991498] #8
[ 0.993138] smpboot cpu 8: start_ip = 97000
[ 1.004393] Initializing CPU#8
[ 1.007452] Leaving ESR disabled.
[ 1.090167] CPU 9 irqstacks, hard=f61a2000 soft=f61a4000
[ 1.090171] #9
[ 1.091811] smpboot cpu 9: start_ip = 97000
[ 1.103064] Initializing CPU#9
[ 1.106119] Leaving ESR disabled.
[ 1.188951] CPU 10 irqstacks, hard=f61ae000 soft=f61b0000
[ 1.188954] #10
[ 1.190678] smpboot cpu 10: start_ip = 97000
[ 1.201931] Initializing CPU#10
[ 1.205071] Leaving ESR disabled.
[ 1.287718] CPU 11 irqstacks, hard=f61c2000 soft=f61c8000
[ 1.287721] #11 Ok.
[ 1.290032] smpboot cpu 11: start_ip = 97000
[ 1.300976] Initializing CPU#11
[ 1.304135] Leaving ESR disabled.
[ 1.387297] Brought up 12 CPUs
[ 1.390482] Total of 12 processors activated (76605.67 BogoMIPS).
[ 1.423721] PM: Registering ACPI NVS region at 7e48d000 (1097728 bytes)
[ 1.430508] PM: Registering ACPI NVS region at 7f33d000 (65536 bytes)
[ 1.437062] PM: Registering ACPI NVS region at 7f376000 (4759552 bytes)
[ 1.444137] RTC time: 16:01:35, date: 03/30/12
[ 1.448763] NET: Registered protocol family 16
[ 1.453479] kworker/u:0 used greatest stack depth: 6756 bytes left
[ 1.454248] ACPI: bus type pci registered
[ 1.464029] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[ 1.473518] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
[ 1.480419] PCI: Using MMCONFIG for extended config space
[ 1.485934] PCI: Using configuration type 1 for base access
[ 1.492120] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 1.499851] mtrr: probably your BIOS does not setup all CPUs.
[ 1.505705] mtrr: corrected configuration.
[ 1.522052] bio: create slab <bio-0> at 0
[ 1.526344] ACPI: Added _OSI(Module Device)
[ 1.530649] ACPI: Added _OSI(Processor Device)
[ 1.535212] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.540029] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.554305] ACPI: EC: Look up EC in DSDT
[ 1.563272] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.740187] ACPI: Interpreter enabled
[ 1.743984] ACPI: (supports S0 S1 S4 S5)
[ 1.748343] ACPI: Using IOAPIC for interrupt routing
[ 1.756908] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.775474] ACPI: No dock devices found.
[ 1.779523] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.789279] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.796019] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
[ 1.802748] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
[ 1.809470] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
[ 1.816197] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.822923] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.830410] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 1.837894] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfbffffff]
[ 1.845400] pci 0000:00:00.0: [8086:3c00] type 0 class 0x000600
[ 1.845468] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.845474] pci 0000:00:00.0: PME# disabled
[ 1.845506] pci 0000:00:01.0: [8086:3c02] type 1 class 0x000604
[ 1.845579] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.845584] pci 0000:00:01.0: PME# disabled
[ 1.845615] pci 0000:00:01.1: [8086:3c03] type 1 class 0x000604
[ 1.845686] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 1.845691] pci 0000:00:01.1: PME# disabled
[ 1.845730] pci 0000:00:02.0: [8086:3c04] type 1 class 0x000604
[ 1.845801] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.845806] pci 0000:00:02.0: PME# disabled
[ 1.845847] pci 0000:00:03.0: [8086:3c08] type 1 class 0x000604
[ 1.845918] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.845923] pci 0000:00:03.0: PME# disabled
[ 1.845955] pci 0000:00:03.2: [8086:3c0a] type 1 class 0x000604
[ 1.846029] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 1.846034] pci 0000:00:03.2: PME# disabled
[ 1.846068] pci 0000:00:04.0: [8086:3c20] type 0 class 0x000880
[ 1.846089] pci 0000:00:04.0: reg 10: [mem 0xfbc1c000-0xfbc1ffff 64bit]
[ 1.846183] pci 0000:00:04.1: [8086:3c21] type 0 class 0x000880
[ 1.846203] pci 0000:00:04.1: reg 10: [mem 0xfbc18000-0xfbc1bfff 64bit]
[ 1.846299] pci 0000:00:04.2: [8086:3c22] type 0 class 0x000880
[ 1.846319] pci 0000:00:04.2: reg 10: [mem 0xfbc14000-0xfbc17fff 64bit]
[ 1.846413] pci 0000:00:04.3: [8086:3c23] type 0 class 0x000880
[ 1.846432] pci 0000:00:04.3: reg 10: [mem 0xfbc10000-0xfbc13fff 64bit]
[ 1.846528] pci 0000:00:04.4: [8086:3c24] type 0 class 0x000880
[ 1.846548] pci 0000:00:04.4: reg 10: [mem 0xfbc0c000-0xfbc0ffff 64bit]
[ 1.846642] pci 0000:00:04.5: [8086:3c25] type 0 class 0x000880
[ 1.846662] pci 0000:00:04.5: reg 10: [mem 0xfbc08000-0xfbc0bfff 64bit]
[ 1.846755] pci 0000:00:04.6: [8086:3c26] type 0 class 0x000880
[ 1.846775] pci 0000:00:04.6: reg 10: [mem 0xfbc04000-0xfbc07fff 64bit]
[ 1.846869] pci 0000:00:04.7: [8086:3c27] type 0 class 0x000880
[ 1.846890] pci 0000:00:04.7: reg 10: [mem 0xfbc00000-0xfbc03fff 64bit]
[ 1.846985] pci 0000:00:05.0: [8086:3c28] type 0 class 0x000880
[ 1.847080] pci 0000:00:05.2: [8086:3c2a] type 0 class 0x000880
[ 1.847174] pci 0000:00:05.4: [8086:3c2c] type 0 class 0x000800
[ 1.847192] pci 0000:00:05.4: reg 10: [mem 0xfbc26000-0xfbc26fff]
[ 1.847293] pci 0000:00:11.0: [8086:1d3e] type 1 class 0x000604
[ 1.847380] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[ 1.847386] pci 0000:00:11.0: PME# disabled
[ 1.847424] pci 0000:00:16.0: [8086:1d3a] type 0 class 0x000780
[ 1.847453] pci 0000:00:16.0: reg 10: [mem 0xfed0e000-0xfed0e00f 64bit]
[ 1.847530] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.847535] pci 0000:00:16.0: PME# disabled
[ 1.847561] pci 0000:00:16.1: [8086:1d3b] type 0 class 0x000780
[ 1.847590] pci 0000:00:16.1: reg 10: [mem 0x00000000-0x0000000f 64bit]
[ 1.847666] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[ 1.847672] pci 0000:00:16.1: PME# disabled
[ 1.847697] pci 0000:00:16.2: [8086:1d3c] type 0 class 0x000101
[ 1.847721] pci 0000:00:16.2: reg 10: [io 0xf0b0-0xf0b7]
[ 1.847734] pci 0000:00:16.2: reg 14: [io 0xf0a0-0xf0a3]
[ 1.847747] pci 0000:00:16.2: reg 18: [io 0xf090-0xf097]
[ 1.847759] pci 0000:00:16.2: reg 1c: [io 0xf080-0xf083]
[ 1.847772] pci 0000:00:16.2: reg 20: [io 0xf070-0xf07f]
[ 1.847844] pci 0000:00:16.3: [8086:1d3d] type 0 class 0x000700
[ 1.847868] pci 0000:00:16.3: reg 10: [io 0xf060-0xf067]
[ 1.847883] pci 0000:00:16.3: reg 14: [mem 0xfbc25000-0xfbc25fff]
[ 1.847997] pci 0000:00:1a.0: [8086:1d2d] type 0 class 0x000c03
[ 1.848024] pci 0000:00:1a.0: reg 10: [mem 0xfbc24000-0xfbc243ff]
[ 1.848118] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.848124] pci 0000:00:1a.0: PME# disabled
[ 1.848159] pci 0000:00:1d.0: [8086:1d26] type 0 class 0x000c03
[ 1.848186] pci 0000:00:1d.0: reg 10: [mem 0xfbc23000-0xfbc233ff]
[ 1.848281] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.848287] pci 0000:00:1d.0: PME# disabled
[ 1.848312] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 1.848387] pci 0000:00:1f.0: [8086:1d41] type 0 class 0x000601
[ 1.848530] pci 0000:00:1f.2: [8086:1d02] type 0 class 0x000106
[ 1.848555] pci 0000:00:1f.2: reg 10: [io 0xf050-0xf057]
[ 1.848567] pci 0000:00:1f.2: reg 14: [io 0xf040-0xf043]
[ 1.848578] pci 0000:00:1f.2: reg 18: [io 0xf030-0xf037]
[ 1.848589] pci 0000:00:1f.2: reg 1c: [io 0xf020-0xf023]
[ 1.848601] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf01f]
[ 1.848612] pci 0000:00:1f.2: reg 24: [mem 0xfbc22000-0xfbc227ff]
[ 1.848658] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.848663] pci 0000:00:1f.2: PME# disabled
[ 1.848685] pci 0000:00:1f.3: [8086:1d22] type 0 class 0x000c05
[ 1.848706] pci 0000:00:1f.3: reg 10: [mem 0xfbc21000-0xfbc210ff 64bit]
[ 1.848735] pci 0000:00:1f.3: reg 20: [io 0x1180-0x119f]
[ 1.848778] pci 0000:00:1f.6: [8086:1d24] type 0 class 0x001180
[ 1.848806] pci 0000:00:1f.6: reg 10: [mem 0xfbc20000-0xfbc20fff 64bit]
[ 1.848939] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.854349] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[ 1.859771] pci 0000:03:00.0: [8086:10c9] type 0 class 0x000200
[ 1.859787] pci 0000:03:00.0: reg 10: [mem 0xfb9a0000-0xfb9bffff]
[ 1.859799] pci 0000:03:00.0: reg 14: [mem 0xfb980000-0xfb99ffff]
[ 1.859811] pci 0000:03:00.0: reg 18: [io 0xe020-0xe03f]
[ 1.859823] pci 0000:03:00.0: reg 1c: [mem 0xfba44000-0xfba47fff]
[ 1.859852] pci 0000:03:00.0: reg 30: [mem 0xfb960000-0xfb97ffff pref]
[ 1.859887] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 1.859892] pci 0000:03:00.0: PME# disabled
[ 1.859940] pci 0000:03:00.1: [8086:10c9] type 0 class 0x000200
[ 1.859955] pci 0000:03:00.1: reg 10: [mem 0xfb940000-0xfb95ffff]
[ 1.859967] pci 0000:03:00.1: reg 14: [mem 0xfb920000-0xfb93ffff]
[ 1.859979] pci 0000:03:00.1: reg 18: [io 0xe000-0xe01f]
[ 1.859991] pci 0000:03:00.1: reg 1c: [mem 0xfba40000-0xfba43fff]
[ 1.860020] pci 0000:03:00.1: reg 30: [mem 0xfb900000-0xfb91ffff pref]
[ 1.860054] pci 0000:03:00.1: PME# supported from D0 D3hot
[ 1.860060] pci 0000:03:00.1: PME# disabled
[ 1.861954] pci 0000:00:02.0: PCI bridge to [bus 03-04]
[ 1.867293] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.867298] pci 0000:00:02.0: bridge window [mem 0xfb900000-0xfbafffff]
[ 1.867384] pci 0000:05:00.0: [8086:1521] type 0 class 0x000200
[ 1.867399] pci 0000:05:00.0: reg 10: [mem 0xfbb20000-0xfbb3ffff]
[ 1.867419] pci 0000:05:00.0: reg 18: [io 0xd020-0xd03f]
[ 1.867430] pci 0000:05:00.0: reg 1c: [mem 0xfbbc4000-0xfbbc7fff]
[ 1.867486] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 1.867491] pci 0000:05:00.0: PME# disabled
[ 1.867533] pci 0000:05:00.1: [8086:1521] type 0 class 0x000200
[ 1.867548] pci 0000:05:00.1: reg 10: [mem 0xfbb00000-0xfbb1ffff]
[ 1.867567] pci 0000:05:00.1: reg 18: [io 0xd000-0xd01f]
[ 1.867579] pci 0000:05:00.1: reg 1c: [mem 0xfbbc0000-0xfbbc3fff]
[ 1.867635] pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
[ 1.867640] pci 0000:05:00.1: PME# disabled
[ 1.868925] pci 0000:00:03.0: PCI bridge to [bus 05-06]
[ 1.874264] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 1.874270] pci 0000:00:03.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.874339] pci 0000:00:03.2: PCI bridge to [bus 07-07]
[ 1.879771] pci 0000:08:00.0: [8086:1d6b] type 0 class 0x000107
[ 1.879797] pci 0000:08:00.0: reg 10: [mem 0xfa47c000-0xfa47ffff 64bit pref]
[ 1.879817] pci 0000:08:00.0: reg 18: [mem 0xfa000000-0xfa3fffff 64bit pref]
[ 1.879831] pci 0000:08:00.0: reg 20: [io 0xc000-0xc0ff]
[ 1.879937] pci 0000:00:11.0: PCI bridge to [bus 08-08]
[ 1.885286] pci 0000:00:11.0: bridge window [io 0xc000-0xcfff]
[ 1.885298] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref]
[ 1.885347] pci 0000:09:04.0: [102b:0532] type 0 class 0x000300
[ 1.885370] pci 0000:09:04.0: reg 10: [mem 0xf9000000-0xf9ffffff pref]
[ 1.885384] pci 0000:09:04.0: reg 14: [mem 0xfb800000-0xfb803fff]
[ 1.885397] pci 0000:09:04.0: reg 18: [mem 0xfb000000-0xfb7fffff]
[ 1.885509] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
[ 1.892673] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff]
[ 1.892681] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
[ 1.892685] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 1.892689] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 1.892693] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 1.892696] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.892787] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.892790] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 1.892794] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff] (subtractive decode)
[ 1.892835] pci_bus 0000:00: on NUMA node 0
[ 1.892840] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.893132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 1.893237] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR33._PRT]
[ 1.893277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
[ 1.893351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.893410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.893464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.893514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
[ 1.893710] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.899863] pci0000:00: ACPI _OSC control (0x11) granted
[ 1.923364] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
[ 1.929519] pci 0000:ff:08.0: [8086:3c80] type 0 class 0x000880
[ 1.929592] pci 0000:ff:08.3: [8086:3c83] type 0 class 0x000880
[ 1.929663] pci 0000:ff:08.4: [8086:3c84] type 0 class 0x000880
[ 1.929740] pci 0000:ff:09.0: [8086:3c90] type 0 class 0x000880
[ 1.929809] pci 0000:ff:09.3: [8086:3c93] type 0 class 0x000880
[ 1.929881] pci 0000:ff:09.4: [8086:3c94] type 0 class 0x000880
[ 1.929956] pci 0000:ff:0a.0: [8086:3cc0] type 0 class 0x000880
[ 1.930008] pci 0000:ff:0a.1: [8086:3cc1] type 0 class 0x000880
[ 1.930059] pci 0000:ff:0a.2: [8086:3cc2] type 0 class 0x000880
[ 1.930111] pci 0000:ff:0a.3: [8086:3cd0] type 0 class 0x000880
[ 1.930164] pci 0000:ff:0b.0: [8086:3ce0] type 0 class 0x000880
[ 1.930214] pci 0000:ff:0b.3: [8086:3ce3] type 0 class 0x000880
[ 1.930264] pci 0000:ff:0c.0: [8086:3ce8] type 0 class 0x000880
[ 1.930314] pci 0000:ff:0c.1: [8086:3ce8] type 0 class 0x000880
[ 1.930364] pci 0000:ff:0c.2: [8086:3ce8] type 0 class 0x000880
[ 1.930416] pci 0000:ff:0c.6: [8086:3cf4] type 0 class 0x000880
[ 1.930466] pci 0000:ff:0c.7: [8086:3cf6] type 0 class 0x000880
[ 1.930515] pci 0000:ff:0d.0: [8086:3ce8] type 0 class 0x000880
[ 1.930565] pci 0000:ff:0d.1: [8086:3ce8] type 0 class 0x000880
[ 1.930615] pci 0000:ff:0d.2: [8086:3ce8] type 0 class 0x000880
[ 1.930667] pci 0000:ff:0d.6: [8086:3cf5] type 0 class 0x000880
[ 1.930720] pci 0000:ff:0e.0: [8086:3ca0] type 0 class 0x000880
[ 1.930782] pci 0000:ff:0e.1: [8086:3c46] type 0 class 0x001101
[ 1.930850] pci 0000:ff:0f.0: [8086:3ca8] type 0 class 0x000880
[ 1.930921] pci 0000:ff:0f.1: [8086:3c71] type 0 class 0x000880
[ 1.930995] pci 0000:ff:0f.2: [8086:3caa] type 0 class 0x000880
[ 1.931067] pci 0000:ff:0f.3: [8086:3cab] type 0 class 0x000880
[ 1.931140] pci 0000:ff:0f.4: [8086:3cac] type 0 class 0x000880
[ 1.931211] pci 0000:ff:0f.5: [8086:3cad] type 0 class 0x000880
[ 1.931278] pci 0000:ff:0f.6: [8086:3cae] type 0 class 0x000880
[ 1.931341] pci 0000:ff:10.0: [8086:3cb0] type 0 class 0x000880
[ 1.931413] pci 0000:ff:10.1: [8086:3cb1] type 0 class 0x000880
[ 1.931484] pci 0000:ff:10.2: [8086:3cb2] type 0 class 0x000880
[ 1.931559] pci 0000:ff:10.3: [8086:3cb3] type 0 class 0x000880
[ 1.931630] pci 0000:ff:10.4: [8086:3cb4] type 0 class 0x000880
[ 1.931703] pci 0000:ff:10.5: [8086:3cb5] type 0 class 0x000880
[ 1.931777] pci 0000:ff:10.6: [8086:3cb6] type 0 class 0x000880
[ 1.931848] pci 0000:ff:10.7: [8086:3cb7] type 0 class 0x000880
[ 1.931915] pci 0000:ff:11.0: [8086:3cb8] type 0 class 0x000880
[ 1.931982] pci 0000:ff:13.0: [8086:3ce4] type 0 class 0x000880
[ 1.932032] pci 0000:ff:13.1: [8086:3c43] type 0 class 0x001101
[ 1.932084] pci 0000:ff:13.4: [8086:3ce6] type 0 class 0x001101
[ 1.932135] pci 0000:ff:13.5: [8086:3c44] type 0 class 0x001101
[ 1.932185] pci 0000:ff:13.6: [8086:3c45] type 0 class 0x000880
[ 1.932248] pci_bus 0000:ff: on NUMA node 0
[ 1.932253] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 1.938037] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 1.946731] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.955934] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.964022] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 1.972124] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.979955] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.987786] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 1.996154] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 2.004539] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 2.012924] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 2.021243] vgaarb: device added: PCI:0000:09:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.029533] vgaarb: loaded
[ 2.032369] vgaarb: bridge control possible 0000:09:04.0
[ 2.038042] SCSI subsystem initialized
[ 2.042079] libata version 3.00 loaded.
[ 2.042335] usbcore: registered new interface driver usbfs
[ 2.047992] usbcore: registered new interface driver hub
[ 2.053489] usbcore: registered new device driver usb
[ 2.059010] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 2.065473] PCI: Using ACPI for IRQ routing
[ 2.078281] PCI: pci_cache_line_size set to 64 bytes
[ 2.078330] pci 0000:00:16.0: no compatible bridge window for [mem 0xfed0e000-0xfed0e00f 64bit]
[ 2.087433] reserve RAM buffer: 000000000009b400 - 000000000009ffff
[ 2.087436] reserve RAM buffer: 000000007e48d000 - 000000007fffffff
[ 2.087853] cfg80211: Calling CRDA to update world regulatory domain
[ 2.094598] NetLabel: Initializing
[ 2.098123] NetLabel: domain hash size = 128
[ 2.102593] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.107707] NetLabel: unlabeled traffic allowed by default
[ 2.113532] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.120480] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.128500] Switching to clocksource hpet
[ 2.136507] pnp: PnP ACPI init
[ 2.139707] ACPI: bus type pnp registered
[ 2.144096] pnp 00:00: [bus 00-fe]
[ 2.144101] pnp 00:00: [io 0x0cf8-0x0cff]
[ 2.144105] pnp 00:00: [io 0x0000-0x03af window]
[ 2.144109] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 2.144112] pnp 00:00: [io 0x03b0-0x03df window]
[ 2.144116] pnp 00:00: [io 0x0d00-0xffff window]
[ 2.144120] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 2.144123] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 2.144127] pnp 00:00: [mem 0x80000000-0xfbffffff window]
[ 2.144131] pnp 00:00: [mem 0x00000000 window]
[ 2.144250] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 2.144268] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[ 2.144271] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[ 2.144275] pnp 00:01: [mem 0xfe000000-0xfeafffff]
[ 2.144278] pnp 00:01: [mem 0xfeb00000-0xfebfffff]
[ 2.144281] pnp 00:01: [mem 0xfed00400-0xfed3ffff]
[ 2.144284] pnp 00:01: [mem 0xfed45000-0xfedfffff]
[ 2.144424] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 2.151153] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 2.157893] system 00:01: [mem 0xfe000000-0xfeafffff] has been reserved
[ 2.164627] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
[ 2.171354] system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved
[ 2.178428] system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved
[ 2.185155] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.185229] pnp 00:02: [mem 0xfbffc000-0xfbffdfff]
[ 2.185363] system 00:02: [mem 0xfbffc000-0xfbffdfff] has been reserved
[ 2.192113] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.192146] pnp 00:03: [dma 4]
[ 2.192149] pnp 00:03: [io 0x0000-0x000f]
[ 2.192153] pnp 00:03: [io 0x0081-0x0083]
[ 2.192155] pnp 00:03: [io 0x0087]
[ 2.192158] pnp 00:03: [io 0x0089-0x008b]
[ 2.192161] pnp 00:03: [io 0x008f]
[ 2.192164] pnp 00:03: [io 0x00c0-0x00df]
[ 2.192235] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.192252] pnp 00:04: [io 0x0070-0x0071]
[ 2.192266] pnp 00:04: [irq 8]
[ 2.192332] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.192344] pnp 00:05: [io 0x0061]
[ 2.192411] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 2.192451] pnp 00:06: [io 0x0010-0x001f]
[ 2.192454] pnp 00:06: [io 0x0022-0x003f]
[ 2.192457] pnp 00:06: [io 0x0044-0x005f]
[ 2.192460] pnp 00:06: [io 0x0062-0x0063]
[ 2.192463] pnp 00:06: [io 0x0065-0x006f]
[ 2.192466] pnp 00:06: [io 0x0072-0x007f]
[ 2.192469] pnp 00:06: [io 0x0080]
[ 2.192472] pnp 00:06: [io 0x0084-0x0086]
[ 2.192474] pnp 00:06: [io 0x0088]
[ 2.192477] pnp 00:06: [io 0x008c-0x008e]
[ 2.192480] pnp 00:06: [io 0x0090-0x009f]
[ 2.192483] pnp 00:06: [io 0x00a2-0x00bf]
[ 2.192486] pnp 00:06: [io 0x00e0-0x00ef]
[ 2.192489] pnp 00:06: [io 0x04d0-0x04d1]
[ 2.192632] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 2.198666] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.198681] pnp 00:07: [io 0x00f0-0x00ff]
[ 2.198690] pnp 00:07: [irq 13]
[ 2.198766] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.198870] pnp 00:08: [io 0x0000-0xffffffff disabled]
[ 2.198874] pnp 00:08: [io 0x0000-0xffffffff disabled]
[ 2.198877] pnp 00:08: [io 0x0a30-0x0a3f]
[ 2.198880] pnp 00:08: [io 0x0000-0xffffffff disabled]
[ 2.199016] system 00:08: [io 0x0a30-0x0a3f] has been reserved
[ 2.205057] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.205097] pnp 00:09: [io 0x0060]
[ 2.205100] pnp 00:09: [io 0x0064]
[ 2.205108] pnp 00:09: [irq 1]
[ 2.205189] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 2.205243] pnp 00:0a: [irq 12]
[ 2.205320] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 2.205677] pnp 00:0b: [io 0x03f8-0x03ff]
[ 2.205684] pnp 00:0b: [irq 4]
[ 2.205688] pnp 00:0b: [dma 0 disabled]
[ 2.205834] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.206170] pnp 00:0c: [io 0x02f8-0x02ff]
[ 2.206177] pnp 00:0c: [irq 3]
[ 2.206180] pnp 00:0c: [dma 0 disabled]
[ 2.206303] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.206443] pnp 00:0d: [io 0x0000-0xffffffff disabled]
[ 2.206447] pnp 00:0d: [io 0x0b00-0x0b7f]
[ 2.206450] pnp 00:0d: [io 0x0000-0xffffffff disabled]
[ 2.206453] pnp 00:0d: [io 0x0000-0xffffffff disabled]
[ 2.206457] pnp 00:0d: [io 0x0000-0xffffffff disabled]
[ 2.206592] system 00:0d: [io 0x0b00-0x0b7f] has been reserved
[ 2.212631] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.212955] pnp 00:0e: [io 0x03e8-0x03ef]
[ 2.212963] pnp 00:0e: [irq 10]
[ 2.212966] pnp 00:0e: [dma 0 disabled]
[ 2.213092] pnp 00:0e: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.213396] pnp 00:0f: [io 0x0400-0x0453]
[ 2.213399] pnp 00:0f: [io 0x0458-0x047f]
[ 2.213403] pnp 00:0f: [io 0x1180-0x119f]
[ 2.213406] pnp 00:0f: [io 0x0500-0x057f]
[ 2.213409] pnp 00:0f: [mem 0xfed1c000-0xfed1ffff]
[ 2.213412] pnp 00:0f: [mem 0xfec00000-0xfecfffff]
[ 2.213415] pnp 00:0f: [mem 0xfed08000-0xfed08fff]
[ 2.213419] pnp 00:0f: [mem 0xff000000-0xffffffff]
[ 2.213562] system 00:0f: [io 0x0400-0x0453] has been reserved
[ 2.219599] system 00:0f: [io 0x0458-0x047f] has been reserved
[ 2.225634] system 00:0f: [io 0x1180-0x119f] has been reserved
[ 2.231666] system 00:0f: [io 0x0500-0x057f] has been reserved
[ 2.237703] system 00:0f: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.244429] system 00:0f: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 2.251501] system 00:0f: [mem 0xfed08000-0xfed08fff] has been reserved
[ 2.258237] system 00:0f: [mem 0xff000000-0xffffffff] has been reserved
[ 2.264981] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.265045] pnp 00:10: [io 0x0454-0x0457]
[ 2.265188] system 00:10: [io 0x0454-0x0457] has been reserved
[ 2.271222] system 00:10: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 2.271432] pnp 00:11: [mem 0xfed00000-0xfed003ff]
[ 2.271529] pnp 00:11: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.271614] pnp 00:12: [bus ff]
[ 2.271717] pnp 00:12: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 2.271922] pnp 00:13: [mem 0x00000000-0x0009ffff]
[ 2.272084] system 00:13: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.279162] system 00:13: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.279398] pnp: PnP ACPI: found 20 devices
[ 2.283702] ACPI: ACPI bus type pnp unregistered
[ 2.327674] PCI: max bus depth: 1 pci_try_num: 2
[ 2.327748] pci 0000:00:16.0: BAR 0: assigned [mem 0x90000000-0x9000000f 64bit]
[ 2.335243] pci 0000:00:16.0: BAR 0: set to [mem 0x90000000-0x9000000f 64bit] (PCI address [0x90000000-0x9000000f])
[ 2.345849] pci 0000:00:16.1: BAR 0: assigned [mem 0x90000010-0x9000001f 64bit]
[ 2.353355] pci 0000:00:16.1: BAR 0: set to [mem 0x90000010-0x9000001f 64bit] (PCI address [0x90000010-0x9000001f])
[ 2.363960] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.369316] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[ 2.374668] pci 0000:00:02.0: PCI bridge to [bus 03-04]
[ 2.380019] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 2.386229] pci 0000:00:02.0: bridge window [mem 0xfb900000-0xfbafffff]
[ 2.393135] pci 0000:00:03.0: PCI bridge to [bus 05-06]
[ 2.398478] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 2.404689] pci 0000:00:03.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 2.411592] pci 0000:00:03.2: PCI bridge to [bus 07-07]
[ 2.416951] pci 0000:00:11.0: PCI bridge to [bus 08-08]
[ 2.422297] pci 0000:00:11.0: bridge window [io 0xc000-0xcfff]
[ 2.428517] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref]
[ 2.436447] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
[ 2.441796] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff]
[ 2.448695] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
[ 2.456638] pci 0000:00:01.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 2.463466] pci 0000:00:01.0: setting latency timer to 64
[ 2.463474] pci 0000:00:01.1: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 2.470293] pci 0000:00:01.1: setting latency timer to 64
[ 2.470308] pci 0000:00:02.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
[ 2.477126] pci 0000:00:02.0: setting latency timer to 64
[ 2.477149] pci 0000:00:03.0: PCI INT A -> GSI 41 (level, low) -> IRQ 41
[ 2.483963] pci 0000:00:03.0: setting latency timer to 64
[ 2.483972] pci 0000:00:03.2: PCI INT A -> GSI 41 (level, low) -> IRQ 41
[ 2.490791] pci 0000:00:03.2: setting latency timer to 64
[ 2.490807] pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.497627] pci 0000:00:11.0: setting latency timer to 64
[ 2.497636] pci 0000:00:1e.0: setting latency timer to 64
[ 2.497642] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 2.497646] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 2.497649] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 2.497655] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 2.497659] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 2.497662] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 2.497666] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfbffffff]
[ 2.497670] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 2.497673] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfbafffff]
[ 2.497677] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 2.497680] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 2.497684] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 2.497688] pci_bus 0000:08: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref]
[ 2.497691] pci_bus 0000:09: resource 1 [mem 0xfb000000-0xfb8fffff]
[ 2.497695] pci_bus 0000:09: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref]
[ 2.497699] pci_bus 0000:09: resource 4 [io 0x0000-0x03af]
[ 2.497702] pci_bus 0000:09: resource 5 [io 0x03e0-0x0cf7]
[ 2.497706] pci_bus 0000:09: resource 6 [io 0x03b0-0x03df]
[ 2.497709] pci_bus 0000:09: resource 7 [io 0x0d00-0xffff]
[ 2.497712] pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000bffff]
[ 2.497716] pci_bus 0000:09: resource 9 [mem 0x000c0000-0x000dffff]
[ 2.497719] pci_bus 0000:09: resource 10 [mem 0x80000000-0xfbffffff]
[ 2.497773] NET: Registered protocol family 2
[ 2.502323] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.509807] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.517788] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.524697] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.531435] TCP reno registered
[ 2.534697] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.540745] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.547422] NET: Registered protocol family 1
[ 2.552027] RPC: Registered named UNIX socket transport module.
[ 2.558071] RPC: Registered udp transport module.
[ 2.562895] RPC: Registered tcp transport module.
[ 2.567729] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.574366] pci 0000:00:1a.0: EHCI: BIOS handoff
[ 2.589805] pci 0000:00:1d.0: EHCI: BIOS handoff
[ 2.605772] pci 0000:09:04.0: Boot video device
[ 2.605861] PCI: CLS 64 bytes, default 64
[ 2.611518] microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x708
[ 2.617567] microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x708
[ 2.623633] microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x708
[ 2.629684] microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x708
[ 2.635730] microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x708
[ 2.641785] microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x708
[ 2.647832] microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x708
[ 2.653876] microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x708
[ 2.659929] microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x708
[ 2.665974] microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x708
[ 2.672037] microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x708
[ 2.678177] microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x708
[ 2.684365] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.693724] audit: initializing netlink socket (disabled)
[ 2.699268] type=2000 audit(1333123294.946:1): initialized
[ 2.707680] highmem bounce pool size: 64 pages
[ 2.712267] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.724129] VFS: Disk quotas dquot_6.5.2
[ 2.728318] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.736654] msgmni has been set to 1721
[ 2.740768] SELinux: Registering netfilter hooks
[ 2.741319] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.748898] io scheduler noop registered
[ 2.752936] io scheduler deadline registered
[ 2.757357] io scheduler cfq registered (default)
[ 2.762956] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.769007] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.777395] ACPI: Power Button [PWRB]
[ 2.781301] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.788888] ACPI: Power Button [PWRF]
[ 2.797453] Monitor-Mwait will be used to enter C-1 state
[ 2.797496] Monitor-Mwait will be used to enter C-2 state
[ 2.797536] Monitor-Mwait will be used to enter C-3 state
[ 2.797557] ACPI: acpi_idle registered with cpuidle
[ 2.851878] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.121663] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.399977] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.605454] Refined TSC clocksource calibration: 3192.307 MHz.
[ 3.611411] Switching to clocksource tsc
[ 3.679300] serial8250: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A
[ 3.730934] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.768611] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.806533] 00:0e: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A
[ 3.823997] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.851435] 0000:00:16.3: ttyS3 at I/O 0xf060 (irq = 17) is a 16550A
[ 3.868087] Non-volatile memory driver v1.3
[ 3.872719] Linux agpgart interface v0.103
[ 3.877202] [drm] Initialized drm 1.1.0 20060810
[ 3.881944] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 3.892437] brd: module loaded
[ 3.897051] loop: module loaded
[ 3.900662] ahci 0000:00:1f.2: version 3.0
[ 3.900685] ahci 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.907651] ahci 0000:00:1f.2: irq 64 for MSI/MSI-X
[ 3.918621] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 3.926988] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 3.935179] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.945653] scsi0 : ahci
[ 3.948488] scsi1 : ahci
[ 3.951296] scsi2 : ahci
[ 3.954103] scsi3 : ahci
[ 3.956913] scsi4 : ahci
[ 3.959712] scsi5 : ahci
[ 3.962676] ata1: SATA max UDMA/133 abar m2048@0xfbc22000 port 0xfbc22100 irq 64
[ 3.970244] ata2: SATA max UDMA/133 abar m2048@0xfbc22000 port 0xfbc22180 irq 64
[ 3.977825] ata3: SATA max UDMA/133 abar m2048@0xfbc22000 port 0xfbc22200 irq 64
[ 3.985401] ata4: SATA max UDMA/133 abar m2048@0xfbc22000 port 0xfbc22280 irq 64
[ 3.992974] ata5: SATA max UDMA/133 abar m2048@0xfbc22000 port 0xfbc22300 irq 64
[ 4.000552] ata6: SATA max UDMA/133 abar m2048@0xfbc22000 port 0xfbc22380 irq 64
[ 4.008839] ata_generic 0000:00:16.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.016457] ata_generic 0000:00:16.2: setting latency timer to 64
[ 4.017011] scsi6 : ata_generic
[ 4.020413] scsi7 : ata_generic
[ 4.023789] ata7: PATA max UDMA/100 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 18
[ 4.031038] ata8: PATA max UDMA/100 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 18
[ 4.038626] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 4.044834] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.050530] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 4.057696] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 4.063642] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 4.069592] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 4.075726] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
[ 4.082457] Copyright (c) 2007-2011 Intel Corporation.
[ 4.087756] igb 0000:03:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 4.094590] igb 0000:03:00.0: setting latency timer to 64
[ 4.094865] igb 0000:03:00.0: irq 65 for MSI/MSI-X
[ 4.094875] igb 0000:03:00.0: irq 66 for MSI/MSI-X
[ 4.094884] igb 0000:03:00.0: irq 67 for MSI/MSI-X
[ 4.094894] igb 0000:03:00.0: irq 68 for MSI/MSI-X
[ 4.094904] igb 0000:03:00.0: irq 69 for MSI/MSI-X
[ 4.094914] igb 0000:03:00.0: irq 70 for MSI/MSI-X
[ 4.094924] igb 0000:03:00.0: irq 71 for MSI/MSI-X
[ 4.094934] igb 0000:03:00.0: irq 72 for MSI/MSI-X
[ 4.094946] igb 0000:03:00.0: irq 73 for MSI/MSI-X
[ 4.255862] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 4.262863] igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:e0:ed:1d:55:06
[ 4.270190] igb 0000:03:00.0: eth0: PBA No: FFFFFF-0FF
[ 4.275453] igb 0000:03:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 4.283235] igb 0000:03:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
[ 4.290064] igb 0000:03:00.1: setting latency timer to 64
[ 4.290334] igb 0000:03:00.1: irq 74 for MSI/MSI-X
[ 4.290345] igb 0000:03:00.1: irq 75 for MSI/MSI-X
[ 4.290355] igb 0000:03:00.1: irq 76 for MSI/MSI-X
[ 4.290365] igb 0000:03:00.1: irq 77 for MSI/MSI-X
[ 4.290375] igb 0000:03:00.1: irq 78 for MSI/MSI-X
[ 4.290385] igb 0000:03:00.1: irq 79 for MSI/MSI-X
[ 4.290395] igb 0000:03:00.1: irq 80 for MSI/MSI-X
[ 4.290405] igb 0000:03:00.1: irq 81 for MSI/MSI-X
[ 4.290415] igb 0000:03:00.1: irq 82 for MSI/MSI-X
[ 4.311642] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.317191] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.322734] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.329066] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.334611] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.340157] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.400762] ata1.00: ATA-8: WDC WD2500BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 4.407674] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.416807] ata1.00: configured for UDMA/133
[ 4.421377] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-2 11.0 PQ: 0 ANSI: 5
[ 4.429929] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.430049] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.443100] sd 0:0:0:0: [sda] Write Protect is off
[ 4.448007] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.448032] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.451395] igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 4.451400] igb 0000:03:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:e0:ed:1d:55:07
[ 4.451477] igb 0000:03:00.1: eth1: PBA No: FFFFFF-0FF
[ 4.451480] igb 0000:03:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 4.451508] igb 0000:05:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
[ 4.451520] igb 0000:05:00.0: setting latency timer to 64
[ 4.451784] igb 0000:05:00.0: irq 83 for MSI/MSI-X
[ 4.451794] igb 0000:05:00.0: irq 84 for MSI/MSI-X
[ 4.451804] igb 0000:05:00.0: irq 85 for MSI/MSI-X
[ 4.451815] igb 0000:05:00.0: irq 86 for MSI/MSI-X
[ 4.451825] igb 0000:05:00.0: irq 87 for MSI/MSI-X
[ 4.451835] igb 0000:05:00.0: irq 88 for MSI/MSI-X
[ 4.451845] igb 0000:05:00.0: irq 89 for MSI/MSI-X
[ 4.451854] igb 0000:05:00.0: irq 90 for MSI/MSI-X
[ 4.451864] igb 0000:05:00.0: irq 91 for MSI/MSI-X
[ 4.501772] sda: sda1 sda2
[ 4.504392] igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 4.504397] igb 0000:05:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 00:25:90:58:28:e6
[ 4.504473] igb 0000:05:00.0: eth2: PBA No: FFFFFF-0FF
[ 4.504476] igb 0000:05:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 4.504511] igb 0000:05:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
[ 4.504524] igb 0000:05:00.1: setting latency timer to 64
[ 4.504798] igb 0000:05:00.1: irq 92 for MSI/MSI-X
[ 4.504811] igb 0000:05:00.1: irq 93 for MSI/MSI-X
[ 4.504826] igb 0000:05:00.1: irq 94 for MSI/MSI-X
[ 4.504838] igb 0000:05:00.1: irq 95 for MSI/MSI-X
[ 4.504851] igb 0000:05:00.1: irq 96 for MSI/MSI-X
[ 4.504864] igb 0000:05:00.1: irq 97 for MSI/MSI-X
[ 4.504876] igb 0000:05:00.1: irq 98 for MSI/MSI-X
[ 4.504888] igb 0000:05:00.1: irq 99 for MSI/MSI-X
[ 4.504901] igb 0000:05:00.1: irq 100 for MSI/MSI-X
[ 4.539180] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.557232] igb 0000:05:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 4.564218] igb 0000:05:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 00:25:90:58:28:e7
[ 4.571531] igb 0000:05:00.1: eth3: PBA No: FFFFFF-0FF
[ 4.576788] igb 0000:05:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 4.584622] Intel(R) Gigabit Virtual Function Network Driver - version 2.0.1-k
[ 4.592027] Copyright (c) 2009 - 2011 Intel Corporation.
[ 4.597558] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k
[ 4.605386] ixgbe: Copyright (c) 1999-2011 Intel Corporation.
[ 4.611336] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.2.0-k
[ 4.620815] Copyright (c) 2009 - 2010 Intel Corporation.
[ 4.626299] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 4.633547] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 4.639394] sky2: driver version 1.30
[ 4.643640] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.650285] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 4.650311] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.657579] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.657584] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 4.662955] drivers/usb/core/inode.c: creating file 'devices'
[ 4.662961] drivers/usb/core/inode.c: creating file '001'
[ 4.663033] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.670613] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 4.670619] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 4.670636] ehci_hcd 0000:00:1a.0: support lpm
[ 4.670649] ehci_hcd 0000:00:1a.0: debug port 2
[ 4.675307] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.679197] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 4.679200] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 4.679221] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbc24000
[ 4.684998] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.688867] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 4.694708] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.700601] usb usb1: default language 0x0409
[ 4.700610] usb usb1: udev 1, busnum 1, minor = 0
[ 4.700614] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.707515] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.714914] usb usb1: Product: EHCI Host Controller
[ 4.719901] usb usb1: Manufacturer: Linux 3.2.0+ ehci_hcd
[ 4.725427] usb usb1: SerialNumber: 0000:00:1a.0
[ 4.730276] usb usb1: usb_probe_device
[ 4.730280] usb usb1: configuration #1 chosen from 1 choice
[ 4.730291] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 4.730370] hub 1-0:1.0: usb_probe_interface
[ 4.730373] hub 1-0:1.0: usb_probe_interface - got id
[ 4.730376] hub 1-0:1.0: USB hub found
[ 4.734250] hub 1-0:1.0: 2 ports detected
[ 4.738369] hub 1-0:1.0: standalone hub
[ 4.738371] hub 1-0:1.0: no power switching (usb 1.0)
[ 4.738377] hub 1-0:1.0: individual port over-current protection
[ 4.738381] hub 1-0:1.0: power on to power good time: 20ms
[ 4.738387] hub 1-0:1.0: local power source is good
[ 4.738390] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 4.738418] drivers/usb/core/inode.c: creating file '001'
[ 4.738512] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.745778] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.745782] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 4.751146] drivers/usb/core/inode.c: creating file '002'
[ 4.751217] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.758797] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 4.758802] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 4.758817] ehci_hcd 0000:00:1d.0: support lpm
[ 4.758830] ehci_hcd 0000:00:1d.0: debug port 2
[ 4.763485] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.767374] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 4.767377] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 4.767403] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbc23000
[ 4.773177] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.777052] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 4.782489] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.788388] usb usb2: default language 0x0409
[ 4.788396] usb usb2: udev 1, busnum 2, minor = 128
[ 4.788399] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.795300] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.802699] usb usb2: Product: EHCI Host Controller
[ 4.807686] usb usb2: Manufacturer: Linux 3.2.0+ ehci_hcd
[ 4.813197] usb usb2: SerialNumber: 0000:00:1d.0
[ 4.818040] usb usb2: usb_probe_device
[ 4.818043] usb usb2: configuration #1 chosen from 1 choice
[ 4.818052] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 4.818120] hub 2-0:1.0: usb_probe_interface
[ 4.818123] hub 2-0:1.0: usb_probe_interface - got id
[ 4.818126] hub 2-0:1.0: USB hub found
[ 4.822005] hub 2-0:1.0: 2 ports detected
[ 4.826136] hub 2-0:1.0: standalone hub
[ 4.826138] hub 2-0:1.0: no power switching (usb 1.0)
[ 4.826141] hub 2-0:1.0: individual port over-current protection
[ 4.826144] hub 2-0:1.0: power on to power good time: 20ms
[ 4.826153] hub 2-0:1.0: local power source is good
[ 4.826156] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 4.826179] drivers/usb/core/inode.c: creating file '001'
[ 4.826303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.832599] ohci_hcd: block sizes: ed 64 td 64
[ 4.832669] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.839157] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 4.839162] hub 1-0:1.0: port 1: status 0501 change 0001
[ 4.839291] usbcore: registered new interface driver usblp
[ 4.844893] Initializing USB Mass Storage driver...
[ 4.849962] usbcore: registered new interface driver usb-storage
[ 4.856077] USB Mass Storage support registered.
[ 4.860862] usbcore: registered new interface driver libusual
[ 4.866908] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 4.877981] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.883066] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.888400] mousedev: PS/2 mouse device common for all mice
[ 4.894416] rtc_cmos 00:04: RTC can wake from S4
[ 4.899331] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.905585] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.912567] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.920780] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 4.925160] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 4.925165] hub 2-0:1.0: port 1: status 0501 change 0001
[ 4.931707] cpuidle: using governor ladder
[ 4.939118] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 4.939130] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 4.940085] cpuidle: using governor menu
[ 4.944144] EFI Variables Facility v0.08 2004-May-17
[ 4.950443] usbcore: registered new interface driver usbhid
[ 4.956136] usbhid: USB HID core driver
[ 4.960677] ALSA device list:
[ 4.963776] No soundcards found.
[ 4.967344] Netfilter messages via NETLINK v0.30.
[ 4.972204] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.978713] ctnetlink v0.93: registering with nfnetlink.
[ 4.984744] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.990275] TCP cubic registered
[ 4.990291] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 4.990297] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 4.993632] Initializing XFRM netlink socket
[ 4.998378] NET: Registered protocol family 10
[ 5.004642] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.010252] IPv6 over IPv4 tunneling driver
[ 5.015413] NET: Registered protocol family 17
[ 5.019999] Registering the dns_resolver key type
[ 5.024849] Using IPI No-Shortcut mode
[ 5.028910] PM: Hibernation image not present or could not be loaded.
[ 5.028918] registered taskstats version 1
[ 5.033981] Magic number: 4:893:35
[ 5.037684] bdi 7:0: hash matches
[ 5.040896] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 5.047801] console [netcon0] enabled
[ 5.051602] netconsole: network logging started
[ 5.060196] md: Waiting for all devices to be available before autodetect
[ 5.067104] md: If you don't use raid, use raid=noautodetect
[ 5.074891] md: Autodetecting RAID arrays.
[ 5.079111] md: Scanned 0 and added 0 devices.
[ 5.083668] md: autorun ...
[ 5.086589] md: ... autorun DONE.
[ 5.092049] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 5.092058] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 5.136151] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 5.143341] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 5.150187] Freeing unused kernel memory: 452k freed
[ 5.155522] Write protecting the kernel text: 6524k
[ 5.160599] Write protecting the kernel read-only data: 2008k
[ 5.166523] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
[ 5.166531] ehci_hcd 0000:00:1a.0: LPM: no device attached
[ 5.166754] usb 1-1: udev 2, busnum 1, minor = 1
[ 5.166758] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 5.173579] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.220654] kworker/u:7 used greatest stack depth: 6308 bytes left
[ 5.220740] usb 1-1: usb_probe_device
[ 5.220745] usb 1-1: configuration #1 chosen from 1 choice
[ 5.227023] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 5.227232] hub 1-1:1.0: usb_probe_interface
[ 5.227238] hub 1-1:1.0: usb_probe_interface - got id
[ 5.227241] hub 1-1:1.0: USB hub found
[ 5.231292] hub 1-1:1.0: 6 ports detected
[ 5.235437] hub 1-1:1.0: standalone hub
[ 5.235449] hub 1-1:1.0: individual port power switching
[ 5.235452] hub 1-1:1.0: individual port over-current protection
[ 5.235455] hub 1-1:1.0: Single TT
[ 5.235458] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 5.235461] hub 1-1:1.0: power on to power good time: 100ms
[ 5.235706] hub 1-1:1.0: local power source is good
[ 5.235710] hub 1-1:1.0: enabling power on all ports
[ 5.236482] drivers/usb/core/inode.c: creating file '002'
[ 5.236508] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 5.236516] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 5.287577] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 5.287586] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 5.336841] hub 1-1:1.0: port 6: status 0101 change 0001
[ 5.338205] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 5.395318] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 5.395326] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 5.436003] usb 1-1: link qh256-0001/f51acec0 start 1 [1/0 us]
[ 5.458156] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
[ 5.458163] ehci_hcd 0000:00:1d.0: LPM: no device attached
[ 5.458469] usb 2-1: udev 2, busnum 2, minor = 129
[ 5.458475] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 5.465292] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.472839] usb 2-1: usb_probe_device
[ 5.472846] usb 2-1: configuration #1 chosen from 1 choice
[ 5.473126] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 5.473401] hub 2-1:1.0: usb_probe_interface
[ 5.473407] hub 2-1:1.0: usb_probe_interface - got id
[ 5.473410] hub 2-1:1.0: USB hub found
[ 5.477382] hub 2-1:1.0: 8 ports detected
[ 5.481506] hub 2-1:1.0: standalone hub
[ 5.481509] hub 2-1:1.0: individual port power switching
[ 5.481512] hub 2-1:1.0: individual port over-current protection
[ 5.481514] hub 2-1:1.0: Single TT
[ 5.481517] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 5.481524] hub 2-1:1.0: power on to power good time: 100ms
[ 5.481811] hub 2-1:1.0: local power source is good
[ 5.481818] hub 2-1:1.0: enabling power on all ports
[ 5.482768] drivers/usb/core/inode.c: creating file '002'
[ 5.482804] hub 1-1:1.0: state 7 ports 6 chg 0040 evt 0000
[ 5.482873] hub 1-1:1.0: port 6, status 0101, change 0000, 12 Mb/s
[ 5.494038] hub 1-1:1.0: port 6 not reset yet, waiting 10ms
[ 5.555904] usb 1-1.6: new full-speed USB device number 3 using ehci_hcd
[ 5.573860] hub 1-1:1.0: port 6 not reset yet, waiting 10ms
[ 5.582920] usb 2-1: link qh256-0001/f51accc0 start 1 [1/0 us]
[ 5.648589] usb 1-1.6: skipped 1 descriptor after interface
[ 5.648596] usb 1-1.6: skipped 1 descriptor after interface
[ 5.648928] usb 1-1.6: default language 0x0409
[ 5.649544] usb 1-1.6: udev 3, busnum 1, minor = 2
[ 5.649550] usb 1-1.6: New USB device found, idVendor=0557, idProduct=2221
[ 5.656551] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.664032] usb 1-1.6: Product: Hermon USB hidmouse Device
[ 5.669640] usb 1-1.6: Manufacturer: Winbond Electronics Corp
[ 5.675789] usb 1-1.6: usb_probe_device
[ 5.675796] usb 1-1.6: configuration #1 chosen from 1 choice
[ 5.676131] usb 1-1.6: adding 1-1.6:1.0 (config #1, interface 0)
[ 5.676404] usbhid 1-1.6:1.0: usb_probe_interface
[ 5.676410] usbhid 1-1.6:1.0: usb_probe_interface - got id
[ 5.677531] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input2
[ 5.691324] generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input0
[ 5.706277] usb 1-1.6: adding 1-1.6:1.1 (config #1, interface 1)
[ 5.706554] usbhid 1-1.6:1.1: usb_probe_interface
[ 5.706560] usbhid 1-1.6:1.1: usb_probe_interface - got id
[ 5.707830] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input3
[ 5.720985] usb 1-1.6: link qh8-0601/f54a8640 start 2 [1/2 us]
[ 5.721506] generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input1
[ 5.736718] drivers/usb/core/inode.c: creating file '003'
[ 5.736743] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000
~ #
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: MCE triggered with v3.1 and v3.2 on Xeon E5
2012-03-30 16:15 MCE triggered with v3.1 and v3.2 on Xeon E5 Arnaud Lacombe
@ 2012-03-30 17:07 ` Tony Luck
0 siblings, 0 replies; 2+ messages in thread
From: Tony Luck @ 2012-03-30 17:07 UTC (permalink / raw)
To: Arnaud Lacombe; +Cc: x86, LKML
On Fri, Mar 30, 2012 at 9:15 AM, Arnaud Lacombe <lacombar@gmail.com> wrote:
> Currently, I would suspect an hardware issue as the machine is brand
> new. I'll see if v3.3 trigger the same MCE and eventually run a
> memtest.
Probably a bad DIMM (you have 4 corrected errors from addresses close
to each other - then an uncorrected error which causes the panic.
The DIMM is in socket 0, channel 3 ... but if you have more than one DIMM
in channel 3 you'll have to try each in turn to see which is causing the problem
(or compile and load drivers/edac/sb_edac.c to see if it gives you a
more precise
location).
-Tony
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-03-30 17:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-03-30 16:15 MCE triggered with v3.1 and v3.2 on Xeon E5 Arnaud Lacombe
2012-03-30 17:07 ` Tony Luck
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.