All of lore.kernel.org
 help / color / mirror / Atom feed
From: Derald Woods <woods.technical@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/2] ARM: at91: NAND PMECC Kconfig conversion
Date: Sat, 19 Jan 2019 18:50:03 -0600	[thread overview]
Message-ID: <CA+CtpRhd-sGSOh-j9tE8S8coZmKFw1Jr-is_pAWXqaJ8p9MKYg@mail.gmail.com> (raw)
In-Reply-To: <20190119232913.GY27429@bill-the-cat>

On Sat, Jan 19, 2019, 5:29 PM Tom Rini <trini@konsulko.com wrote:

> On Sat, Jan 19, 2019 at 02:02:29PM -0600, Derald D. Woods wrote:
>
> > This series converts to SPL_GENERATE_ATMEL_PMECC_HEADER Kconfig. The
> > focus is Kconfig conversion and clean build for the affected boards.
> >
> > Derald D. Woods (2):
> >   nand: atmel: Replace SYS_NAND_ECC_BASE with ATMEL_BASE_ECC
> >   ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
>
> This series causes a ton of problems now on:
> pm9g45 at91sam9261ek_dataflash_cs3 at91sam9261ek_dataflash_cs0
> at91sam9xeek_dataflash_cs1 at91sam9260ek_dataflash_cs0
> at91sam9260ek_dataflash_cs1 at91sam9260ek_nandflash
> at91sam9263ek_dataflash_cs0 ethernut5 sama5d2_ptc_ek_mmc
> at91sam9g20ek_dataflash_cs1 at91sam9g20ek_dataflash_cs0
> sama5d2_ptc_ek_nandflash at91sam9xeek_nandflash
> at91sam9m10g45ek_nandflash snapper9g20 at91sam9rlek_mmc
> at91sam9xeek_dataflash_cs0 at91sam9g10ek_nandflash
> at91sam9g10ek_dataflash_cs3 at91sam9g10ek_dataflash_cs0
> at91sam9g20ek_2mmc_nandflash at91sam9263ek_norflash_boot
> at91sam9g20ek_nandflash snapper9260 at91sam9g20ek_2mmc
> at91sam9263ek_norflash at91sam9261ek_nandflash meesc pm9261 pm9263
> at91sam9m10g45ek_mmc gurnard usb_a9263_dataflash at91sam9rlek_nandflash
> at91sam9263ek_dataflash at91sam9263ek_nandflash at91sam9rlek_dataflash
>


OK.  So this is likely due to patch 0001 only. I will drop it. And try a
few of these configs.

Derald



> --
> Tom
>

  reply	other threads:[~2019-01-20  0:50 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-05  0:15 [U-Boot] boot.bin on SD Card for SAMA5D3 Xplained Daniel Evans
2018-12-05 14:36 ` Eugen.Hristev at microchip.com
2018-12-05 18:08   ` Daniel Evans
2018-12-05 20:38   ` Robert Nelson
2018-12-06  8:02     ` Eugen.Hristev at microchip.com
2018-12-08  2:37       ` Derald D. Woods
2018-12-08 19:49 ` [U-Boot] [PATCH] ARM: at91: Fix 'boot.bin' generation when CONFIG_SD_BOOT is enabled Derald D. Woods
2018-12-10  8:32   ` Eugen.Hristev at microchip.com
2018-12-10 13:01     ` Derald D. Woods
2018-12-10 14:03       ` Eugen.Hristev at microchip.com
2018-12-10 14:54         ` Derald Woods
2018-12-10 15:14           ` Eugen.Hristev at microchip.com
2018-12-11  5:48             ` Derald D. Woods
2018-12-15  7:36               ` [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig Derald D. Woods
2018-12-28  0:04                 ` Derald Woods
2019-01-07  9:40                 ` Eugen.Hristev at microchip.com
2019-01-10  1:00                   ` Derald Woods
2019-01-11 11:27                     ` Eugen.Hristev at microchip.com
2019-01-11 16:51                       ` Derald Woods
2019-01-11 16:53                         ` Derald Woods
2019-01-18  8:37                           ` Eugen.Hristev at microchip.com
2019-01-19  3:26                             ` Derald D. Woods
2019-01-19 20:02                 ` [U-Boot] [PATCH 0/2] ARM: at91: NAND PMECC Kconfig conversion Derald D. Woods
2019-01-19 20:02                   ` [U-Boot] [PATCH 1/2] nand: atmel: Replace SYS_NAND_ECC_BASE with ATMEL_BASE_ECC Derald D. Woods
2019-01-19 20:02                   ` [U-Boot] [PATCH 2/2] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig Derald D. Woods
2019-01-19 23:29                   ` [U-Boot] [PATCH 0/2] ARM: at91: NAND PMECC Kconfig conversion Tom Rini
2019-01-20  0:50                     ` Derald Woods [this message]
2019-01-20  3:37                   ` [U-Boot] [PATCH v2 0/1] " Derald D. Woods
2019-01-20  3:37                     ` [U-Boot] [PATCH v3 1/1] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig Derald D. Woods
2019-01-20 12:57                       ` Tom Rini
2019-01-20 14:25                         ` Derald Woods
2019-01-21 16:58                 ` [U-Boot] " Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+CtpRhd-sGSOh-j9tE8S8coZmKFw1Jr-is_pAWXqaJ8p9MKYg@mail.gmail.com \
    --to=woods.technical@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.